drivers/nvmem/lpc18xx_eeprom.c

   1 /*
   2  * NXP LPC18xx/LPC43xx EEPROM memory NVMEM driver
   3  *
   4  * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License version 2 as published by
   8  * the Free Software Foundation.
   9  */
  10
  11 #include <linux/clk.h>
  12 #include <linux/device.h>
  13 #include <linux/delay.h>
  14 #include <linux/err.h>
  15 #include <linux/io.h>
  16 #include <linux/module.h>
  17 #include <linux/nvmem-provider.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/regmap.h>
  20 #include <linux/reset.h>
  21
  22 /* Registers */
  23 #define LPC18XX_EEPROM_AUTOPROG                 0x00c
  24 #define LPC18XX_EEPROM_AUTOPROG_WORD            0x1
  25
  26 #define LPC18XX_EEPROM_CLKDIV                   0x014
  27
  28 #define LPC18XX_EEPROM_PWRDWN                   0x018
  29 #define LPC18XX_EEPROM_PWRDWN_NO                0x0
  30 #define LPC18XX_EEPROM_PWRDWN_YES               0x1
  31
  32 #define LPC18XX_EEPROM_INTSTAT                  0xfe0
  33 #define LPC18XX_EEPROM_INTSTAT_END_OF_PROG      BIT(2)
  34
  35 #define LPC18XX_EEPROM_INTSTATCLR               0xfe8
  36 #define LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST   BIT(2)
  37
  38 /* Fixed page size (bytes) */
  39 #define LPC18XX_EEPROM_PAGE_SIZE                0x80
  40
  41 /* EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) */
  42 #define LPC18XX_EEPROM_CLOCK_HZ                 1500000
  43
  44 /* EEPROM requires 3 ms of erase/program time between each writing */
  45 #define LPC18XX_EEPROM_PROGRAM_TIME             3
  46
  47 struct lpc18xx_eeprom_dev {
  48         struct clk *clk;
  49         void __iomem *reg_base;
  50         void __iomem *mem_base;
  51         struct nvmem_device *nvmem;
  52         unsigned reg_bytes;
  53         unsigned val_bytes;
  54 };
  55
  56 static struct regmap_config lpc18xx_regmap_config = {
  57         .reg_bits = 32,
  58         .reg_stride = 4,
  59         .val_bits = 32,
  60 };
  61
  62 static inline void lpc18xx_eeprom_writel(struct lpc18xx_eeprom_dev *eeprom,
  63                                          u32 reg, u32 val)
  64 {
  65         writel(val, eeprom->reg_base + reg);
  66 }
  67
  68 static inline u32 lpc18xx_eeprom_readl(struct lpc18xx_eeprom_dev *eeprom,
  69                                        u32 reg)
  70 {
  71         return readl(eeprom->reg_base + reg);
  72 }
  73
  74 static int lpc18xx_eeprom_busywait_until_prog(struct lpc18xx_eeprom_dev *eeprom)
  75 {
  76         unsigned long end;
  77         u32 val;
  78
  79         /* Wait until EEPROM program operation has finished */
  80         end = jiffies + msecs_to_jiffies(LPC18XX_EEPROM_PROGRAM_TIME * 10);
  81
  82         while (time_is_after_jiffies(end)) {
  83                 val = lpc18xx_eeprom_readl(eeprom, LPC18XX_EEPROM_INTSTAT);
  84
  85                 if (val & LPC18XX_EEPROM_INTSTAT_END_OF_PROG) {
  86                         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_INTSTATCLR,
  87                                         LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST);
  88                         return 0;
  89                 }
  90
  91                 usleep_range(LPC18XX_EEPROM_PROGRAM_TIME * USEC_PER_MSEC,
  92                              (LPC18XX_EEPROM_PROGRAM_TIME + 1) * USEC_PER_MSEC);
  93         }
  94
  95         return -ETIMEDOUT;
  96 }
  97
  98 static int lpc18xx_eeprom_gather_write(void *context, const void *reg,
  99                                        size_t reg_size, const void *val,
 100                                        size_t val_size)
 101 {
 102         struct lpc18xx_eeprom_dev *eeprom = context;
 103         unsigned int offset = *(u32 *)reg;
 104         int ret;
 105
 106         if (offset % lpc18xx_regmap_config.reg_stride)
 107                 return -EINVAL;
 108
 109         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
 110                               LPC18XX_EEPROM_PWRDWN_NO);
 111
 112         /* Wait 100 us while the EEPROM wakes up */
 113         usleep_range(100, 200);
 114
 115         while (val_size) {
 116                 writel(*(u32 *)val, eeprom->mem_base + offset);
 117                 ret = lpc18xx_eeprom_busywait_until_prog(eeprom);
 118                 if (ret < 0)
 119                         return ret;
 120
 121                 val_size -= eeprom->val_bytes;
 122                 val += eeprom->val_bytes;
 123                 offset += eeprom->val_bytes;
 124         }
 125
 126         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
 127                               LPC18XX_EEPROM_PWRDWN_YES);
 128
 129         return 0;
 130 }
 131
 132 static int lpc18xx_eeprom_write(void *context, const void *data, size_t count)
 133 {
 134         struct lpc18xx_eeprom_dev *eeprom = context;
 135         unsigned int offset = eeprom->reg_bytes;
 136
 137         if (count <= offset)
 138                 return -EINVAL;
 139
 140         return lpc18xx_eeprom_gather_write(context, data, eeprom->reg_bytes,
 141                                            data + offset, count - offset);
 142 }
 143
 144 static int lpc18xx_eeprom_read(void *context, const void *reg, size_t reg_size,
 145                                void *val, size_t val_size)
 146 {
 147         struct lpc18xx_eeprom_dev *eeprom = context;
 148         unsigned int offset = *(u32 *)reg;
 149
 150         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
 151                               LPC18XX_EEPROM_PWRDWN_NO);
 152
 153         /* Wait 100 us while the EEPROM wakes up */
 154         usleep_range(100, 200);
 155
 156         while (val_size) {
 157                 *(u32 *)val = readl(eeprom->mem_base + offset);
 158                 val_size -= eeprom->val_bytes;
 159                 val += eeprom->val_bytes;
 160                 offset += eeprom->val_bytes;
 161         }
 162
 163         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
 164                               LPC18XX_EEPROM_PWRDWN_YES);
 165
 166         return 0;
 167 }
 168
 169 static struct regmap_bus lpc18xx_eeprom_bus = {
 170         .write = lpc18xx_eeprom_write,
 171         .gather_write = lpc18xx_eeprom_gather_write,
 172         .read = lpc18xx_eeprom_read,
 173         .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
 174         .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
 175 };
 176
 177 static bool lpc18xx_eeprom_writeable_reg(struct device *dev, unsigned int reg)
 178 {
 179         /*
 180          * The last page contains the EEPROM initialization data and is not
 181          * writable.
 182          */
 183         return reg <= lpc18xx_regmap_config.max_register -
 184                                                 LPC18XX_EEPROM_PAGE_SIZE;
 185 }
 186
 187 static bool lpc18xx_eeprom_readable_reg(struct device *dev, unsigned int reg)
 188 {
 189         return reg <= lpc18xx_regmap_config.max_register;
 190 }
 191
 192 static struct nvmem_config lpc18xx_nvmem_config = {
 193         .name = "lpc18xx-eeprom",
 194         .owner = THIS_MODULE,
 195 };
 196
 197 static int lpc18xx_eeprom_probe(struct platform_device *pdev)
 198 {
 199         struct lpc18xx_eeprom_dev *eeprom;
 200         struct device *dev = &pdev->dev;
 201         struct reset_control *rst;
 202         unsigned long clk_rate;
 203         struct regmap *regmap;
 204         struct resource *res;
 205         int ret;
 206
 207         eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
 208         if (!eeprom)
 209                 return -ENOMEM;
 210
 211         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
 212         eeprom->reg_base = devm_ioremap_resource(dev, res);
 213         if (IS_ERR(eeprom->reg_base))
 214                 return PTR_ERR(eeprom->reg_base);
 215
 216         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
 217         eeprom->mem_base = devm_ioremap_resource(dev, res);
 218         if (IS_ERR(eeprom->mem_base))
 219                 return PTR_ERR(eeprom->mem_base);
 220
 221         eeprom->clk = devm_clk_get(&pdev->dev, "eeprom");
 222         if (IS_ERR(eeprom->clk)) {
 223                 dev_err(&pdev->dev, "failed to get eeprom clock\n");
 224                 return PTR_ERR(eeprom->clk);
 225         }
 226
 227         ret = clk_prepare_enable(eeprom->clk);
 228         if (ret < 0) {
 229                 dev_err(dev, "failed to prepare/enable eeprom clk: %d\n", ret);
 230                 return ret;
 231         }
 232
 233         rst = devm_reset_control_get(dev, NULL);
 234         if (IS_ERR(rst)) {
 235                 dev_err(dev, "failed to get reset: %ld\n", PTR_ERR(rst));
 236                 ret = PTR_ERR(rst);
 237                 goto err_clk;
 238         }
 239
 240         ret = reset_control_assert(rst);
 241         if (ret < 0) {
 242                 dev_err(dev, "failed to assert reset: %d\n", ret);
 243                 goto err_clk;
 244         }
 245
 246         eeprom->val_bytes = lpc18xx_regmap_config.val_bits / BITS_PER_BYTE;
 247         eeprom->reg_bytes = lpc18xx_regmap_config.reg_bits / BITS_PER_BYTE;
 248
 249         /*
 250          * Clock rate is generated by dividing the system bus clock by the
 251          * division factor, contained in the divider register (minus 1 encoded).
 252          */
 253         clk_rate = clk_get_rate(eeprom->clk);
 254         clk_rate = DIV_ROUND_UP(clk_rate, LPC18XX_EEPROM_CLOCK_HZ) - 1;
 255         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_CLKDIV, clk_rate);
 256
 257         /*
 258          * Writing a single word to the page will start the erase/program cycle
 259          * automatically
 260          */
 261         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_AUTOPROG,
 262                               LPC18XX_EEPROM_AUTOPROG_WORD);
 263
 264         lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
 265                               LPC18XX_EEPROM_PWRDWN_YES);
 266
 267         lpc18xx_regmap_config.max_register = resource_size(res) - 1;
 268         lpc18xx_regmap_config.writeable_reg = lpc18xx_eeprom_writeable_reg;
 269         lpc18xx_regmap_config.readable_reg = lpc18xx_eeprom_readable_reg;
 270
 271         regmap = devm_regmap_init(dev, &lpc18xx_eeprom_bus, eeprom,
 272                                   &lpc18xx_regmap_config);
 273         if (IS_ERR(regmap)) {
 274                 dev_err(dev, "regmap init failed: %ld\n", PTR_ERR(regmap));
 275                 ret = PTR_ERR(regmap);
 276                 goto err_clk;
 277         }
 278
 279         lpc18xx_nvmem_config.dev = dev;
 280
 281         eeprom->nvmem = nvmem_register(&lpc18xx_nvmem_config);
 282         if (IS_ERR(eeprom->nvmem)) {
 283                 ret = PTR_ERR(eeprom->nvmem);
 284                 goto err_clk;
 285         }
 286
 287         platform_set_drvdata(pdev, eeprom);
 288
 289         return 0;
 290
 291 err_clk:
 292         clk_disable_unprepare(eeprom->clk);
 293
 294         return ret;
 295 }
 296
 297 static int lpc18xx_eeprom_remove(struct platform_device *pdev)
 298 {
 299         struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
 300         int ret;
 301
 302         ret = nvmem_unregister(eeprom->nvmem);
 303         if (ret < 0)
 304                 return ret;
 305
 306         clk_disable_unprepare(eeprom->clk);
 307
 308         return 0;
 309 }
 310
 311 static const struct of_device_id lpc18xx_eeprom_of_match[] = {
 312         { .compatible = "nxp,lpc1857-eeprom" },
 313         { },
 314 };
 315 MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_of_match);
 316
 317 static struct platform_driver lpc18xx_eeprom_driver = {
 318         .probe = lpc18xx_eeprom_probe,
 319         .remove = lpc18xx_eeprom_remove,
 320         .driver = {
 321                 .name = "lpc18xx-eeprom",
 322                 .of_match_table = lpc18xx_eeprom_of_match,
 323         },
 324 };
 325
 326 module_platform_driver(lpc18xx_eeprom_driver);
 327
 328 MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
 329 MODULE_DESCRIPTION("NXP LPC18xx EEPROM memory Driver");
 330 MODULE_LICENSE("GPL v2");