2 bool "Voltage and Current Regulator Support"
4 Generic Voltage and Current Regulator support.
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
26 config REGULATOR_DEBUG
27 bool "Regulator debug support"
29 Say yes here to enable debugging support.
31 config REGULATOR_FIXED_VOLTAGE
32 tristate "Fixed voltage regulator support"
34 This driver provides support for fixed voltage regulators,
35 useful for systems which use a combination of software
36 managed regulators and simple non-configurable regulators.
38 config REGULATOR_VIRTUAL_CONSUMER
39 tristate "Virtual regulator consumer support"
41 This driver provides a virtual consumer for the voltage and
42 current regulator API which provides sysfs controls for
43 configuring the supplies requested. This is mainly useful
48 config REGULATOR_USERSPACE_CONSUMER
49 tristate "Userspace regulator consumer support"
51 There are some classes of devices that are controlled entirely
52 from user space. Userspace consumer driver provides ability to
53 control power supplies for such devices.
57 config REGULATOR_88PM800
58 tristate "Marvell 88PM800 Power regulators"
59 depends on MFD_88PM800
61 This driver supports Marvell 88PM800 voltage regulator chips.
62 It delivers digitally programmable output,
63 the voltage is programmed via I2C interface.
64 It's suitable to support PXA988 chips to control VCC_MAIN and
67 config REGULATOR_88PM8607
68 tristate "Marvell 88PM8607 Power regulators"
69 depends on MFD_88PM860X=y
71 This driver supports 88PM8607 voltage regulator chips.
73 config REGULATOR_ACT8865
74 tristate "Active-semi act8865 voltage regulator"
78 This driver controls a active-semi act8865 voltage output
79 regulator via I2C bus.
81 config REGULATOR_ACT8945A
82 tristate "Active-semi ACT8945A voltage regulator"
83 depends on MFD_ACT8945A
85 This driver controls a active-semi ACT8945A voltage regulator
86 via I2C bus. The ACT8945A features three step-down DC/DC converters
87 and four low-dropout linear regulators, along with a ActivePath
90 config REGULATOR_AD5398
91 tristate "Analog Devices AD5398/AD5821 regulators"
94 This driver supports AD5398 and AD5821 current regulator chips.
95 If building into module, its name is ad5398.ko.
97 config REGULATOR_ANATOP
98 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
101 Say y here to support Freescale i.MX on-chip ANATOP LDOs
102 regulators. It is recommended that this option be
103 enabled on i.MX6 platform.
105 config REGULATOR_AAT2870
106 tristate "AnalogicTech AAT2870 Regulators"
107 depends on MFD_AAT2870_CORE
109 If you have a AnalogicTech AAT2870 say Y to enable the
112 config REGULATOR_AB3100
113 tristate "ST-Ericsson AB3100 Regulator functions"
114 depends on AB3100_CORE
115 default y if AB3100_CORE
117 These regulators correspond to functionality in the
118 AB3100 analog baseband dealing with power regulators
121 config REGULATOR_AB8500
122 bool "ST-Ericsson AB8500 Power Regulators"
123 depends on AB8500_CORE
125 This driver supports the regulators found on the ST-Ericsson mixed
128 config REGULATOR_ARIZONA
129 tristate "Wolfson Arizona class devices"
130 depends on MFD_ARIZONA
133 Support for the regulators found on Wolfson Arizona class
136 config REGULATOR_AS3711
137 tristate "AS3711 PMIC"
138 depends on MFD_AS3711
140 This driver provides support for the voltage regulators on the
143 config REGULATOR_AS3722
144 tristate "AMS AS3722 PMIC Regulators"
145 depends on MFD_AS3722
147 This driver provides support for the voltage regulators on the
148 AS3722 PMIC. This will enable support for all the software
149 controllable DCDC/LDO regulators.
151 config REGULATOR_AXP20X
152 tristate "X-POWERS AXP20X PMIC Regulators"
153 depends on MFD_AXP20X
155 This driver provides support for the voltage regulators on the
158 config REGULATOR_BCM590XX
159 tristate "Broadcom BCM590xx PMU Regulators"
160 depends on MFD_BCM590XX
162 This driver provides support for the voltage regulators on the
163 BCM590xx PMUs. This will enable support for the software
164 controllable LDO/Switching regulators.
166 config REGULATOR_DA903X
167 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
168 depends on PMIC_DA903X
170 Say y here to support the BUCKs and LDOs regulators found on
171 Dialog Semiconductor DA9030/DA9034 PMIC.
173 config REGULATOR_DA9052
174 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
175 depends on PMIC_DA9052
177 This driver supports the voltage regulators of DA9052-BC and
180 config REGULATOR_DA9055
181 tristate "Dialog Semiconductor DA9055 regulators"
182 depends on MFD_DA9055
184 Say y here to support the BUCKs and LDOs regulators found on
185 Dialog Semiconductor DA9055 PMIC.
187 This driver can also be built as a module. If so, the module
188 will be called da9055-regulator.
190 config REGULATOR_DA9062
191 tristate "Dialog Semiconductor DA9062 regulators"
192 depends on MFD_DA9062
194 Say y here to support the BUCKs and LDOs regulators found on
197 This driver can also be built as a module. If so, the module
198 will be called da9062-regulator.
200 config REGULATOR_DA9063
201 tristate "Dialog Semiconductor DA9063 regulators"
202 depends on MFD_DA9063
204 Say y here to support the BUCKs and LDOs regulators found on
207 This driver can also be built as a module. If so, the module
208 will be called da9063-regulator.
210 config REGULATOR_DA9210
211 tristate "Dialog Semiconductor DA9210 regulator"
215 Say y here to support for the Dialog Semiconductor DA9210.
216 The DA9210 is a multi-phase synchronous step down
217 converter 12A DC-DC Buck controlled through an I2C
220 config REGULATOR_DA9211
221 tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
225 Say y here to support for the Dialog Semiconductor DA9211/DA9212
226 /DA9213/DA9214/DA9215.
227 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
228 step down converter 12A or 16A DC-DC Buck controlled through an I2C
231 config REGULATOR_DBX500_PRCMU
234 config REGULATOR_DB8500_PRCMU
235 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
236 depends on MFD_DB8500_PRCMU
237 select REGULATOR_DBX500_PRCMU
239 This driver supports the voltage domain regulators controlled by the
242 config REGULATOR_FAN53555
243 tristate "Fairchild FAN53555 Regulator"
247 This driver supports Fairchild FAN53555 Digitally Programmable
248 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
249 regulator that delivers a digitally programmable output from an
250 input voltage supply of 2.5V to 5.5V. The output voltage is
251 programmed through an I2C interface.
253 config REGULATOR_GPIO
254 tristate "GPIO regulator support"
255 depends on GPIOLIB || COMPILE_TEST
257 This driver provides support for regulators that can be
258 controlled via gpios.
259 It is capable of supporting current and voltage regulators
260 and the platform has to provide a mapping of GPIO-states
261 to target volts/amps.
263 config REGULATOR_HI6421
264 tristate "HiSilicon Hi6421 PMIC voltage regulator support"
265 depends on MFD_HI6421_PMIC && OF
267 This driver provides support for the voltage regulators on the
268 HiSilicon Hi6421 PMU / Codec IC.
269 Hi6421 is a multi-function device which, on regulator part, provides
270 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
271 of them come with support to either ECO (idle) or sleep mode.
273 config REGULATOR_HI655X
274 tristate "Hisilicon HI655X PMIC regulators support"
275 depends on ARCH_HISI || COMPILE_TEST
276 depends on MFD_HI655X_PMIC && OF
278 This driver provides support for the voltage regulators of the
279 Hisilicon Hi655x PMIC device.
281 config REGULATOR_ISL9305
282 tristate "Intersil ISL9305 regulator"
286 This driver supports ISL9305 voltage regulator chip.
288 config REGULATOR_ISL6271A
289 tristate "Intersil ISL6271A Power regulator"
292 This driver supports ISL6271A voltage regulator chip.
294 config REGULATOR_LM363X
295 tristate "TI LM363X voltage regulators"
296 depends on MFD_TI_LMU
298 This driver supports LM3631 and LM3632 voltage regulators for
300 One boost output voltage is configurable and always on.
301 Other LDOs are used for the display module.
303 config REGULATOR_LP3971
304 tristate "National Semiconductors LP3971 PMIC regulator driver"
307 Say Y here to support the voltage regulators and convertors
308 on National Semiconductors LP3971 PMIC
310 config REGULATOR_LP3972
311 tristate "National Semiconductors LP3972 PMIC regulator driver"
314 Say Y here to support the voltage regulators and convertors
315 on National Semiconductors LP3972 PMIC
317 config REGULATOR_LP872X
318 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
322 This driver supports LP8720/LP8725 PMIC
324 config REGULATOR_LP8755
325 tristate "TI LP8755 High Performance PMU driver"
329 This driver supports LP8755 High Performance PMU driver. This
330 chip contains six step-down DC/DC converters which can support
331 9 mode multiphase configuration.
333 config REGULATOR_LP8788
334 tristate "TI LP8788 Power Regulators"
335 depends on MFD_LP8788
337 This driver supports LP8788 voltage regulator chip.
339 config REGULATOR_LTC3589
340 tristate "LTC3589 8-output voltage regulator"
344 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
345 8-output regulators controlled via I2C.
347 config REGULATOR_MAX14577
348 tristate "Maxim 14577/77836 regulator"
349 depends on MFD_MAX14577
351 This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
352 The MAX14577 regulators include safeout LDO and charger current
353 regulator. The MAX77836 has two additional LDOs.
355 config REGULATOR_MAX1586
356 tristate "Maxim 1586/1587 voltage regulator"
359 This driver controls a Maxim 1586 or 1587 voltage output
360 regulator via I2C bus. The provided regulator is suitable
361 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
363 config REGULATOR_MAX8649
364 tristate "Maxim 8649 voltage regulator"
368 This driver controls a Maxim 8649 voltage output regulator via
371 config REGULATOR_MAX8660
372 tristate "Maxim 8660/8661 voltage regulator"
375 This driver controls a Maxim 8660/8661 voltage output
376 regulator via I2C bus.
378 config REGULATOR_MAX8907
379 tristate "Maxim 8907 voltage regulator"
380 depends on MFD_MAX8907
382 This driver controls a Maxim 8907 voltage output regulator
383 via I2C bus. The provided regulator is suitable for Tegra
384 chip to control Step-Down DC-DC and LDOs.
386 config REGULATOR_MAX8925
387 tristate "Maxim MAX8925 Power Management IC"
388 depends on MFD_MAX8925
390 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
392 config REGULATOR_MAX8952
393 tristate "Maxim MAX8952 Power Management IC"
396 This driver controls a Maxim 8952 voltage output regulator
397 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
398 modes ranging from 0.77V to 1.40V by 0.01V steps.
400 config REGULATOR_MAX8973
401 tristate "Maxim MAX8973 voltage regulator "
405 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
406 switching regulator delievers up to 9A of output current. Each
407 phase operates at a 2MHz fixed frequency with a 120 deg shift
408 from the adjacent phase, allowing the use of small magnetic component.
410 config REGULATOR_MAX8997
411 tristate "Maxim 8997/8966 regulator"
412 depends on MFD_MAX8997
414 This driver controls a Maxim 8997/8966 regulator
415 via I2C bus. The provided regulator is suitable for S5PC110,
416 S5PV210, and Exynos-4 chips to control VCC_CORE and
419 config REGULATOR_MAX8998
420 tristate "Maxim 8998 voltage regulator"
421 depends on MFD_MAX8998
423 This driver controls a Maxim 8998 voltage output regulator
424 via I2C bus. The provided regulator is suitable for S3C6410
425 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
427 config REGULATOR_MAX77686
428 tristate "Maxim 77686 regulator"
429 depends on MFD_MAX77686
431 This driver controls a Maxim 77686 regulator
432 via I2C bus. The provided regulator is suitable for
433 Exynos-4 chips to control VARM and VINT voltages.
435 config REGULATOR_MAX77693
436 tristate "Maxim 77693/77843 regulator"
437 depends on (MFD_MAX77693 || MFD_MAX77843)
439 This driver controls a Maxim 77693/77843 regulators via I2C bus.
440 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
441 and one current regulator 'CHARGER'. This is suitable for
442 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
444 config REGULATOR_MAX77802
445 tristate "Maxim 77802 regulator"
446 depends on MFD_MAX77686
448 This driver controls a Maxim 77802 regulator
449 via I2C bus. The provided regulator is suitable for
450 Exynos5420/Exynos5800 SoCs to control various voltages.
451 It includes support for control of voltage and ramp speed.
453 config REGULATOR_MC13XXX_CORE
456 config REGULATOR_MC13783
457 tristate "Freescale MC13783 regulator driver"
458 depends on MFD_MC13XXX
459 select REGULATOR_MC13XXX_CORE
461 Say y here to support the regulators found on the Freescale MC13783
464 config REGULATOR_MC13892
465 tristate "Freescale MC13892 regulator driver"
466 depends on MFD_MC13XXX
467 select REGULATOR_MC13XXX_CORE
469 Say y here to support the regulators found on the Freescale MC13892
472 config REGULATOR_MT6311
473 tristate "MediaTek MT6311 PMIC"
477 Say y here to select this option to enable the power regulator of
478 MediaTek MT6311 PMIC.
479 This driver supports the control of different power rails of device
480 through regulator interface.
482 config REGULATOR_MT6397
483 tristate "MediaTek MT6397 PMIC"
484 depends on MFD_MT6397
486 Say y here to select this option to enable the power regulator of
487 MediaTek MT6397 PMIC.
488 This driver supports the control of different power rails of device
489 through regulator interface.
491 config REGULATOR_PALMAS
492 tristate "TI Palmas PMIC Regulators"
493 depends on MFD_PALMAS
495 If you wish to control the regulators on the Palmas series of
496 chips say Y here. This will enable support for all the software
497 controllable SMPS/LDO regulators.
499 The regulators available on Palmas series chips vary depending
500 on the muxing. This is handled automatically in the driver by
501 reading the mux info from OTP.
503 config REGULATOR_PBIAS
504 tristate "PBIAS OMAP regulator driver"
505 depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
507 Say y here to support pbias regulator for mmc1:SD card i/o
509 This driver provides support for OMAP pbias modelled
512 config REGULATOR_PCAP
513 tristate "Motorola PCAP2 regulator driver"
516 This driver provides support for the voltage regulators of the
519 config REGULATOR_PCF50633
520 tristate "NXP PCF50633 regulator driver"
521 depends on MFD_PCF50633
523 Say Y here to support the voltage regulators and convertors
526 config REGULATOR_PFUZE100
527 tristate "Freescale PFUZE100/PFUZE200 regulator driver"
531 Say y here to support the regulators found on the Freescale
532 PFUZE100/PFUZE200 PMIC.
534 config REGULATOR_PV88060
535 tristate "Powerventure Semiconductor PV88060 regulator"
539 Say y here to support the voltage regulators and convertors
542 config REGULATOR_PV88090
543 tristate "Powerventure Semiconductor PV88090 regulator"
547 Say y here to support the voltage regulators and convertors
551 tristate "PWM voltage regulator"
554 This driver supports PWM controlled voltage regulators. PWM
555 duty cycle can increase or decrease the voltage.
557 config REGULATOR_QCOM_RPM
558 tristate "Qualcomm RPM regulator driver"
559 depends on MFD_QCOM_RPM
561 If you say yes to this option, support will be included for the
562 regulators exposed by the Resource Power Manager found in Qualcomm
563 8660, 8960 and 8064 based devices.
565 Say M here if you want to include support for the regulators on the
566 Qualcomm RPM as a module. The module will be named
567 "qcom_rpm-regulator".
569 config REGULATOR_QCOM_SMD_RPM
570 tristate "Qualcomm SMD based RPM regulator driver"
571 depends on QCOM_SMD_RPM
573 If you say yes to this option, support will be included for the
574 regulators exposed by the Resource Power Manager found in Qualcomm
577 Say M here if you want to include support for the regulators on the
578 Qualcomm RPM as a module. The module will be named
579 "qcom_smd-regulator".
581 config REGULATOR_QCOM_SPMI
582 tristate "Qualcomm SPMI regulator driver"
583 depends on SPMI || COMPILE_TEST
585 If you say yes to this option, support will be included for the
586 regulators found in Qualcomm SPMI PMICs.
588 Say M here if you want to include support for the regulators on the
589 Qualcomm SPMI PMICs as a module. The module will be named
590 "qcom_spmi-regulator".
592 config REGULATOR_RC5T583
593 tristate "RICOH RC5T583 Power regulators"
594 depends on MFD_RC5T583
596 Select this option to enable the power regulator of RICOH
598 This driver supports the control of different power rails of device
599 through regulator interface. The device supports multiple DCDC/LDO
600 outputs which can be controlled by i2c communication.
602 config REGULATOR_RK808
603 tristate "Rockchip RK808 Power regulators"
606 Select this option to enable the power regulator of ROCKCHIP
608 This driver supports the control of different power rails of device
609 through regulator interface. The device supports multiple DCDC/LDO
610 outputs which can be controlled by i2c communication.
612 config REGULATOR_RN5T618
613 tristate "Ricoh RN5T618 voltage regulators"
614 depends on MFD_RN5T618
616 Say y here to support the regulators found on Ricoh RN5T618 PMIC.
618 config REGULATOR_RT5033
619 tristate "Richtek RT5033 Regulators"
620 depends on MFD_RT5033
622 This adds support for voltage and current regulators in Richtek
623 RT5033 PMIC. The device supports multiple regulators like
624 current source, LDO and Buck.
626 config REGULATOR_S2MPA01
627 tristate "Samsung S2MPA01 voltage regulator"
628 depends on MFD_SEC_CORE
630 This driver controls Samsung S2MPA01 voltage output regulator
631 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
633 config REGULATOR_S2MPS11
634 tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
635 depends on MFD_SEC_CORE
637 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
638 output regulator via I2C bus. The chip is comprised of high efficient
639 Buck converters including Dual-Phase Buck converter, Buck-Boost
640 converter, various LDOs.
642 config REGULATOR_S5M8767
643 tristate "Samsung S5M8767A voltage regulator"
644 depends on MFD_SEC_CORE
646 This driver supports a Samsung S5M8767A voltage output regulator
647 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
648 supports DVS mode with 8bits of output voltage control.
650 config REGULATOR_SKY81452
651 tristate "Skyworks Solutions SKY81452 voltage regulator"
652 depends on MFD_SKY81452
654 This driver supports Skyworks SKY81452 voltage output regulator
655 via I2C bus. SKY81452 has one voltage linear regulator can be
656 programmed from 4.5V to 20V.
658 This driver can also be built as a module. If so, the module
659 will be called sky81452-regulator.
661 config REGULATOR_TI_ABB
662 tristate "TI Adaptive Body Bias on-chip LDO"
665 Select this option to support Texas Instruments' on-chip Adaptive Body
666 Bias (ABB) LDO regulators. It is recommended that this option be
667 enabled on required TI SoC. Certain Operating Performance Points
668 on TI SoCs may be unstable without enabling this as it provides
669 device specific optimized bias to allow/optimize functionality.
671 config REGULATOR_STW481X_VMMC
672 bool "ST Microelectronics STW481X VMMC regulator"
673 depends on MFD_STW481X || COMPILE_TEST
674 default y if MFD_STW481X
676 This driver supports the internal VMMC regulator in the STw481x
679 config REGULATOR_TPS51632
680 tristate "TI TPS51632 Power Regulator"
684 This driver supports TPS51632 voltage regulator chip.
685 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
686 with Serial VID control and DVFS.
687 The voltage output can be configure through I2C interface or PWM
690 config REGULATOR_TPS6105X
691 tristate "TI TPS6105X Power regulators"
693 default y if TPS6105X
695 This driver supports TPS61050/TPS61052 voltage regulator chips.
696 It is a single boost converter primarily for white LEDs and
699 config REGULATOR_TPS62360
700 tristate "TI TPS6236x Power Regulator"
704 This driver supports TPS6236x voltage regulator chip. This
705 regulator is meant for processor core supply. This chip is
706 high-frequency synchronous step down dc-dc converter optimized
707 for battery-powered portable applications.
709 config REGULATOR_TPS65023
710 tristate "TI TPS65023 Power regulators"
714 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
715 three step-down converters and two general-purpose LDO voltage regulators.
716 It supports TI's software based Class-2 SmartReflex implementation.
718 config REGULATOR_TPS6507X
719 tristate "TI TPS6507X Power regulators"
722 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
723 three step-down converters and two general-purpose LDO voltage regulators.
724 It supports TI's software based Class-2 SmartReflex implementation.
726 config REGULATOR_TPS65086
727 tristate "TI TPS65086 Power regulators"
728 depends on MFD_TPS65086
730 This driver provides support for the voltage regulators on
733 config REGULATOR_TPS65090
734 tristate "TI TPS65090 Power regulator"
735 depends on MFD_TPS65090
737 This driver provides support for the voltage regulators on the
740 config REGULATOR_TPS65217
741 tristate "TI TPS65217 Power regulators"
742 depends on MFD_TPS65217
744 This driver supports TPS65217 voltage regulator chips. TPS65217
745 provides three step-down converters and four general-purpose LDO
746 voltage regulators. It supports software based voltage control
747 for different voltage domains
749 config REGULATOR_TPS65218
750 tristate "TI TPS65218 Power regulators"
751 depends on MFD_TPS65218 && OF
753 This driver supports TPS65218 voltage regulator chips. TPS65218
754 provides six step-down converters and one general-purpose LDO
755 voltage regulators. It supports software based voltage control
756 for different voltage domains
758 config REGULATOR_TPS6524X
759 tristate "TI TPS6524X Power regulators"
762 This driver supports TPS6524X voltage regulator chips. TPS6524X
763 provides three step-down converters and two general-purpose LDO
764 voltage regulators. This device is interfaced using a customized
765 serial interface currently supported on the sequencer serial
768 config REGULATOR_TPS6586X
769 tristate "TI TPS6586X Power regulators"
770 depends on MFD_TPS6586X
772 This driver supports TPS6586X voltage regulator chips.
774 config REGULATOR_TPS65910
775 tristate "TI TPS65910/TPS65911 Power Regulators"
776 depends on MFD_TPS65910
778 This driver supports TPS65910/TPS65911 voltage regulator chips.
780 config REGULATOR_TPS65912
781 tristate "TI TPS65912 Power regulator"
782 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
784 This driver supports TPS65912 voltage regulator chip.
786 config REGULATOR_TPS80031
787 tristate "TI TPS80031/TPS80032 power regualtor driver"
788 depends on MFD_TPS80031
790 TPS80031/ TPS80032 Fully Integrated Power Management with Power
791 Path and Battery Charger. It has 5 configurable step-down
792 converters, 11 general purpose LDOs, VBUS generator and digital
793 output to control regulators.
795 config REGULATOR_TWL4030
796 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
797 depends on TWL4030_CORE
799 This driver supports the voltage regulators provided by
800 this family of companion chips.
802 config REGULATOR_VEXPRESS
803 tristate "Versatile Express regulators"
804 depends on VEXPRESS_CONFIG
806 This driver provides support for voltage regulators available
807 on the ARM Ltd's Versatile Express platform.
809 config REGULATOR_WM831X
810 tristate "Wolfson Microelectronics WM831x PMIC regulators"
811 depends on MFD_WM831X
813 Support the voltage and current regulators of the WM831x series
816 config REGULATOR_WM8350
817 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
818 depends on MFD_WM8350
820 This driver provides support for the voltage and current regulators
821 of the WM8350 AudioPlus PMIC.
823 config REGULATOR_WM8400
824 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
825 depends on MFD_WM8400
827 This driver provides support for the voltage regulators of the
828 WM8400 AudioPlus PMIC.
830 config REGULATOR_WM8994
831 tristate "Wolfson Microelectronics WM8994 CODEC"
832 depends on MFD_WM8994
834 This driver provides support for the voltage regulators on the