2 * cec-adap.c - HDMI Consumer Electronics Control framework - CEC adapter
4 * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
6 * This program is free software; you may redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
11 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
12 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
13 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
14 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
15 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
16 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
20 #include <linux/errno.h>
21 #include <linux/init.h>
22 #include <linux/module.h>
23 #include <linux/kernel.h>
24 #include <linux/kmod.h>
25 #include <linux/ktime.h>
26 #include <linux/slab.h>
28 #include <linux/string.h>
29 #include <linux/types.h>
33 static int cec_report_features(struct cec_adapter
*adap
, unsigned int la_idx
);
34 static int cec_report_phys_addr(struct cec_adapter
*adap
, unsigned int la_idx
);
37 * 400 ms is the time it takes for one 16 byte message to be
38 * transferred and 5 is the maximum number of retries. Add
39 * another 100 ms as a margin. So if the transmit doesn't
40 * finish before that time something is really wrong and we
43 * This is a sign that something it really wrong and a warning
46 #define CEC_XFER_TIMEOUT_MS (5 * 400 + 100)
48 #define call_op(adap, op, arg...) \
49 (adap->ops->op ? adap->ops->op(adap, ## arg) : 0)
51 #define call_void_op(adap, op, arg...) \
54 adap->ops->op(adap, ## arg); \
57 static int cec_log_addr2idx(const struct cec_adapter
*adap
, u8 log_addr
)
61 for (i
= 0; i
< adap
->log_addrs
.num_log_addrs
; i
++)
62 if (adap
->log_addrs
.log_addr
[i
] == log_addr
)
67 static unsigned int cec_log_addr2dev(const struct cec_adapter
*adap
, u8 log_addr
)
69 int i
= cec_log_addr2idx(adap
, log_addr
);
71 return adap
->log_addrs
.primary_device_type
[i
< 0 ? 0 : i
];
75 * Queue a new event for this filehandle. If ts == 0, then set it
76 * to the current time.
78 * The two events that are currently defined do not need to keep track
79 * of intermediate events, so no actual queue of events is needed,
80 * instead just store the latest state and the total number of lost
83 * Should new events be added in the future that require intermediate
84 * results to be queued as well, then a proper queue data structure is
85 * required. But until then, just keep it simple.
87 void cec_queue_event_fh(struct cec_fh
*fh
,
88 const struct cec_event
*new_ev
, u64 ts
)
90 struct cec_event
*ev
= &fh
->events
[new_ev
->event
- 1];
95 mutex_lock(&fh
->lock
);
96 if (new_ev
->event
== CEC_EVENT_LOST_MSGS
&&
97 fh
->pending_events
& (1 << new_ev
->event
)) {
99 * If there is already a lost_msgs event, then just
100 * update the lost_msgs count. This effectively
101 * merges the old and new events into one.
103 ev
->lost_msgs
.lost_msgs
+= new_ev
->lost_msgs
.lost_msgs
;
108 * Intermediate states are not interesting, so just
109 * overwrite any older event.
113 fh
->pending_events
|= 1 << new_ev
->event
;
116 mutex_unlock(&fh
->lock
);
117 wake_up_interruptible(&fh
->wait
);
120 /* Queue a new event for all open filehandles. */
121 static void cec_queue_event(struct cec_adapter
*adap
,
122 const struct cec_event
*ev
)
124 u64 ts
= ktime_get_ns();
127 mutex_lock(&adap
->devnode
.fhs_lock
);
128 list_for_each_entry(fh
, &adap
->devnode
.fhs
, list
)
129 cec_queue_event_fh(fh
, ev
, ts
);
130 mutex_unlock(&adap
->devnode
.fhs_lock
);
134 * Queue a new message for this filehandle. If there is no more room
135 * in the queue, then send the LOST_MSGS event instead.
137 static void cec_queue_msg_fh(struct cec_fh
*fh
, const struct cec_msg
*msg
)
139 static const struct cec_event ev_lost_msg
= {
141 .event
= CEC_EVENT_LOST_MSGS
,
144 .lost_msgs
.lost_msgs
= 1,
147 struct cec_msg_entry
*entry
;
149 mutex_lock(&fh
->lock
);
150 entry
= kmalloc(sizeof(*entry
), GFP_KERNEL
);
155 /* Add new msg at the end of the queue */
156 list_add_tail(&entry
->list
, &fh
->msgs
);
159 * if the queue now has more than CEC_MAX_MSG_RX_QUEUE_SZ
160 * messages, drop the oldest one and send a lost message event.
162 if (fh
->queued_msgs
== CEC_MAX_MSG_RX_QUEUE_SZ
) {
163 list_del(&entry
->list
);
167 mutex_unlock(&fh
->lock
);
168 wake_up_interruptible(&fh
->wait
);
172 mutex_unlock(&fh
->lock
);
173 cec_queue_event_fh(fh
, &ev_lost_msg
, 0);
177 * Queue the message for those filehandles that are in monitor mode.
178 * If valid_la is true (this message is for us or was sent by us),
179 * then pass it on to any monitoring filehandle. If this message
180 * isn't for us or from us, then only give it to filehandles that
181 * are in MONITOR_ALL mode.
183 * This can only happen if the CEC_CAP_MONITOR_ALL capability is
184 * set and the CEC adapter was placed in 'monitor all' mode.
186 static void cec_queue_msg_monitor(struct cec_adapter
*adap
,
187 const struct cec_msg
*msg
,
191 u32 monitor_mode
= valid_la
? CEC_MODE_MONITOR
:
192 CEC_MODE_MONITOR_ALL
;
194 mutex_lock(&adap
->devnode
.fhs_lock
);
195 list_for_each_entry(fh
, &adap
->devnode
.fhs
, list
) {
196 if (fh
->mode_follower
>= monitor_mode
)
197 cec_queue_msg_fh(fh
, msg
);
199 mutex_unlock(&adap
->devnode
.fhs_lock
);
203 * Queue the message for follower filehandles.
205 static void cec_queue_msg_followers(struct cec_adapter
*adap
,
206 const struct cec_msg
*msg
)
210 mutex_lock(&adap
->devnode
.fhs_lock
);
211 list_for_each_entry(fh
, &adap
->devnode
.fhs
, list
) {
212 if (fh
->mode_follower
== CEC_MODE_FOLLOWER
)
213 cec_queue_msg_fh(fh
, msg
);
215 mutex_unlock(&adap
->devnode
.fhs_lock
);
218 /* Notify userspace of an adapter state change. */
219 static void cec_post_state_event(struct cec_adapter
*adap
)
221 struct cec_event ev
= {
222 .event
= CEC_EVENT_STATE_CHANGE
,
225 ev
.state_change
.phys_addr
= adap
->phys_addr
;
226 ev
.state_change
.log_addr_mask
= adap
->log_addrs
.log_addr_mask
;
227 cec_queue_event(adap
, &ev
);
231 * A CEC transmit (and a possible wait for reply) completed.
232 * If this was in blocking mode, then complete it, otherwise
233 * queue the message for userspace to dequeue later.
235 * This function is called with adap->lock held.
237 static void cec_data_completed(struct cec_data
*data
)
240 * Delete this transmit from the filehandle's xfer_list since
241 * we're done with it.
243 * Note that if the filehandle is closed before this transmit
244 * finished, then the release() function will set data->fh to NULL.
245 * Without that we would be referring to a closed filehandle.
248 list_del(&data
->xfer_list
);
250 if (data
->blocking
) {
252 * Someone is blocking so mark the message as completed
255 data
->completed
= true;
259 * No blocking, so just queue the message if needed and
263 cec_queue_msg_fh(data
->fh
, &data
->msg
);
269 * A pending CEC transmit needs to be cancelled, either because the CEC
270 * adapter is disabled or the transmit takes an impossibly long time to
273 * This function is called with adap->lock held.
275 static void cec_data_cancel(struct cec_data
*data
)
278 * It's either the current transmit, or it is a pending
279 * transmit. Take the appropriate action to clear it.
281 if (data
->adap
->transmitting
== data
) {
282 data
->adap
->transmitting
= NULL
;
284 list_del_init(&data
->list
);
285 if (!(data
->msg
.tx_status
& CEC_TX_STATUS_OK
))
286 data
->adap
->transmit_queue_sz
--;
289 /* Mark it as an error */
290 data
->msg
.tx_ts
= ktime_get_ns();
291 data
->msg
.tx_status
= CEC_TX_STATUS_ERROR
|
292 CEC_TX_STATUS_MAX_RETRIES
;
294 data
->msg
.tx_error_cnt
= 1;
295 /* Queue transmitted message for monitoring purposes */
296 cec_queue_msg_monitor(data
->adap
, &data
->msg
, 1);
298 cec_data_completed(data
);
302 * Main CEC state machine
304 * Wait until the thread should be stopped, or we are not transmitting and
305 * a new transmit message is queued up, in which case we start transmitting
306 * that message. When the adapter finished transmitting the message it will
307 * call cec_transmit_done().
309 * If the adapter is disabled, then remove all queued messages instead.
311 * If the current transmit times out, then cancel that transmit.
313 int cec_thread_func(void *_adap
)
315 struct cec_adapter
*adap
= _adap
;
318 unsigned int signal_free_time
;
319 struct cec_data
*data
;
320 bool timeout
= false;
323 if (adap
->transmitting
) {
327 * We are transmitting a message, so add a timeout
328 * to prevent the state machine to get stuck waiting
329 * for this message to finalize and add a check to
330 * see if the adapter is disabled in which case the
331 * transmit should be canceled.
333 err
= wait_event_interruptible_timeout(adap
->kthread_waitq
,
334 kthread_should_stop() ||
335 (!adap
->is_configured
&& !adap
->is_configuring
) ||
336 (!adap
->transmitting
&&
337 !list_empty(&adap
->transmit_queue
)),
338 msecs_to_jiffies(CEC_XFER_TIMEOUT_MS
));
341 /* Otherwise we just wait for something to happen. */
342 wait_event_interruptible(adap
->kthread_waitq
,
343 kthread_should_stop() ||
344 (!adap
->transmitting
&&
345 !list_empty(&adap
->transmit_queue
)));
348 mutex_lock(&adap
->lock
);
350 if ((!adap
->is_configured
&& !adap
->is_configuring
) ||
351 kthread_should_stop()) {
353 * If the adapter is disabled, or we're asked to stop,
354 * then cancel any pending transmits.
356 while (!list_empty(&adap
->transmit_queue
)) {
357 data
= list_first_entry(&adap
->transmit_queue
,
358 struct cec_data
, list
);
359 cec_data_cancel(data
);
361 if (adap
->transmitting
)
362 cec_data_cancel(adap
->transmitting
);
365 * Cancel the pending timeout work. We have to unlock
366 * the mutex when flushing the work since
367 * cec_wait_timeout() will take it. This is OK since
368 * no new entries can be added to wait_queue as long
369 * as adap->transmitting is NULL, which it is due to
370 * the cec_data_cancel() above.
372 while (!list_empty(&adap
->wait_queue
)) {
373 data
= list_first_entry(&adap
->wait_queue
,
374 struct cec_data
, list
);
376 if (!cancel_delayed_work(&data
->work
)) {
377 mutex_unlock(&adap
->lock
);
378 flush_scheduled_work();
379 mutex_lock(&adap
->lock
);
381 cec_data_cancel(data
);
386 if (adap
->transmitting
&& timeout
) {
388 * If we timeout, then log that. This really shouldn't
389 * happen and is an indication of a faulty CEC adapter
390 * driver, or the CEC bus is in some weird state.
392 dprintk(0, "message %*ph timed out!\n",
393 adap
->transmitting
->msg
.len
,
394 adap
->transmitting
->msg
.msg
);
395 /* Just give up on this. */
396 cec_data_cancel(adap
->transmitting
);
401 * If we are still transmitting, or there is nothing new to
402 * transmit, then just continue waiting.
404 if (adap
->transmitting
|| list_empty(&adap
->transmit_queue
))
407 /* Get a new message to transmit */
408 data
= list_first_entry(&adap
->transmit_queue
,
409 struct cec_data
, list
);
410 list_del_init(&data
->list
);
411 adap
->transmit_queue_sz
--;
412 /* Make this the current transmitting message */
413 adap
->transmitting
= data
;
416 * Suggested number of attempts as per the CEC 2.0 spec:
417 * 4 attempts is the default, except for 'secondary poll
418 * messages', i.e. poll messages not sent during the adapter
419 * configuration phase when it allocates logical addresses.
421 if (data
->msg
.len
== 1 && adap
->is_configured
)
426 /* Set the suggested signal free time */
427 if (data
->attempts
) {
428 /* should be >= 3 data bit periods for a retry */
429 signal_free_time
= CEC_SIGNAL_FREE_TIME_RETRY
;
430 } else if (data
->new_initiator
) {
431 /* should be >= 5 data bit periods for new initiator */
432 signal_free_time
= CEC_SIGNAL_FREE_TIME_NEW_INITIATOR
;
435 * should be >= 7 data bit periods for sending another
436 * frame immediately after another.
438 signal_free_time
= CEC_SIGNAL_FREE_TIME_NEXT_XFER
;
440 if (data
->attempts
== 0)
441 data
->attempts
= attempts
;
443 /* Tell the adapter to transmit, cancel on error */
444 if (adap
->ops
->adap_transmit(adap
, data
->attempts
,
445 signal_free_time
, &data
->msg
))
446 cec_data_cancel(data
);
449 mutex_unlock(&adap
->lock
);
451 if (kthread_should_stop())
458 * Called by the CEC adapter if a transmit finished.
460 void cec_transmit_done(struct cec_adapter
*adap
, u8 status
, u8 arb_lost_cnt
,
461 u8 nack_cnt
, u8 low_drive_cnt
, u8 error_cnt
)
463 struct cec_data
*data
;
465 u64 ts
= ktime_get_ns();
467 dprintk(2, "cec_transmit_done %02x\n", status
);
468 mutex_lock(&adap
->lock
);
469 data
= adap
->transmitting
;
472 * This can happen if a transmit was issued and the cable is
473 * unplugged while the transmit is ongoing. Ignore this
474 * transmit in that case.
476 dprintk(1, "cec_transmit_done without an ongoing transmit!\n");
482 /* Drivers must fill in the status! */
483 WARN_ON(status
== 0);
485 msg
->tx_status
|= status
;
486 msg
->tx_arb_lost_cnt
+= arb_lost_cnt
;
487 msg
->tx_nack_cnt
+= nack_cnt
;
488 msg
->tx_low_drive_cnt
+= low_drive_cnt
;
489 msg
->tx_error_cnt
+= error_cnt
;
491 /* Mark that we're done with this transmit */
492 adap
->transmitting
= NULL
;
495 * If there are still retry attempts left and there was an error and
496 * the hardware didn't signal that it retried itself (by setting
497 * CEC_TX_STATUS_MAX_RETRIES), then we will retry ourselves.
499 if (data
->attempts
> 1 &&
500 !(status
& (CEC_TX_STATUS_MAX_RETRIES
| CEC_TX_STATUS_OK
))) {
501 /* Retry this message */
503 /* Add the message in front of the transmit queue */
504 list_add(&data
->list
, &adap
->transmit_queue
);
505 adap
->transmit_queue_sz
++;
511 /* Always set CEC_TX_STATUS_MAX_RETRIES on error */
512 if (!(status
& CEC_TX_STATUS_OK
))
513 msg
->tx_status
|= CEC_TX_STATUS_MAX_RETRIES
;
515 /* Queue transmitted message for monitoring purposes */
516 cec_queue_msg_monitor(adap
, msg
, 1);
518 if ((status
& CEC_TX_STATUS_OK
) && adap
->is_configured
&&
521 * Queue the message into the wait queue if we want to wait
524 list_add_tail(&data
->list
, &adap
->wait_queue
);
525 schedule_delayed_work(&data
->work
,
526 msecs_to_jiffies(msg
->timeout
));
528 /* Otherwise we're done */
529 cec_data_completed(data
);
534 * Wake up the main thread to see if another message is ready
535 * for transmitting or to retry the current message.
537 wake_up_interruptible(&adap
->kthread_waitq
);
539 mutex_unlock(&adap
->lock
);
541 EXPORT_SYMBOL_GPL(cec_transmit_done
);
544 * Called when waiting for a reply times out.
546 static void cec_wait_timeout(struct work_struct
*work
)
548 struct cec_data
*data
= container_of(work
, struct cec_data
, work
.work
);
549 struct cec_adapter
*adap
= data
->adap
;
551 mutex_lock(&adap
->lock
);
553 * Sanity check in case the timeout and the arrival of the message
554 * happened at the same time.
556 if (list_empty(&data
->list
))
559 /* Mark the message as timed out */
560 list_del_init(&data
->list
);
561 data
->msg
.rx_ts
= ktime_get_ns();
562 data
->msg
.rx_status
= CEC_RX_STATUS_TIMEOUT
;
563 cec_data_completed(data
);
565 mutex_unlock(&adap
->lock
);
569 * Transmit a message. The fh argument may be NULL if the transmit is not
570 * associated with a specific filehandle.
572 * This function is called with adap->lock held.
574 int cec_transmit_msg_fh(struct cec_adapter
*adap
, struct cec_msg
*msg
,
575 struct cec_fh
*fh
, bool block
)
577 struct cec_data
*data
;
578 u8 last_initiator
= 0xff;
579 unsigned int timeout
;
586 msg
->tx_arb_lost_cnt
= 0;
587 msg
->tx_nack_cnt
= 0;
588 msg
->tx_low_drive_cnt
= 0;
589 msg
->tx_error_cnt
= 0;
591 msg
->sequence
= ++adap
->sequence
;
593 msg
->sequence
= ++adap
->sequence
;
595 if (msg
->reply
&& msg
->timeout
== 0) {
596 /* Make sure the timeout isn't 0. */
601 if (msg
->len
== 0 || msg
->len
> CEC_MAX_MSG_SIZE
) {
602 dprintk(1, "cec_transmit_msg: invalid length %d\n", msg
->len
);
605 if (msg
->timeout
&& msg
->len
== 1) {
606 dprintk(1, "cec_transmit_msg: can't reply for poll msg\n");
609 memset(msg
->msg
+ msg
->len
, 0, sizeof(msg
->msg
) - msg
->len
);
611 if (cec_msg_initiator(msg
) != 0xf ||
612 cec_msg_destination(msg
) == 0xf) {
613 dprintk(1, "cec_transmit_msg: invalid poll message\n");
616 if (cec_has_log_addr(adap
, cec_msg_destination(msg
))) {
618 * If the destination is a logical address our adapter
619 * has already claimed, then just NACK this.
620 * It depends on the hardware what it will do with a
621 * POLL to itself (some OK this), so it is just as
622 * easy to handle it here so the behavior will be
625 msg
->tx_ts
= ktime_get_ns();
626 msg
->tx_status
= CEC_TX_STATUS_NACK
|
627 CEC_TX_STATUS_MAX_RETRIES
;
628 msg
->tx_nack_cnt
= 1;
632 if (msg
->len
> 1 && !cec_msg_is_broadcast(msg
) &&
633 cec_has_log_addr(adap
, cec_msg_destination(msg
))) {
634 dprintk(1, "cec_transmit_msg: destination is the adapter itself\n");
637 if (cec_msg_initiator(msg
) != 0xf &&
638 !cec_has_log_addr(adap
, cec_msg_initiator(msg
))) {
639 dprintk(1, "cec_transmit_msg: initiator has unknown logical address %d\n",
640 cec_msg_initiator(msg
));
643 if (!adap
->is_configured
&& !adap
->is_configuring
)
646 if (adap
->transmit_queue_sz
>= CEC_MAX_MSG_TX_QUEUE_SZ
)
649 data
= kzalloc(sizeof(*data
), GFP_KERNEL
);
653 if (msg
->len
> 1 && msg
->msg
[1] == CEC_MSG_CDC_MESSAGE
) {
654 msg
->msg
[2] = adap
->phys_addr
>> 8;
655 msg
->msg
[3] = adap
->phys_addr
& 0xff;
659 dprintk(2, "cec_transmit_msg: %*ph (wait for 0x%02x%s)\n",
660 msg
->len
, msg
->msg
, msg
->reply
, !block
? ", nb" : "");
662 dprintk(2, "cec_transmit_msg: %*ph%s\n",
663 msg
->len
, msg
->msg
, !block
? " (nb)" : "");
668 data
->blocking
= block
;
671 * Determine if this message follows a message from the same
672 * initiator. Needed to determine the free signal time later on.
675 if (!(list_empty(&adap
->transmit_queue
))) {
676 const struct cec_data
*last
;
678 last
= list_last_entry(&adap
->transmit_queue
,
679 const struct cec_data
, list
);
680 last_initiator
= cec_msg_initiator(&last
->msg
);
681 } else if (adap
->transmitting
) {
683 cec_msg_initiator(&adap
->transmitting
->msg
);
686 data
->new_initiator
= last_initiator
!= cec_msg_initiator(msg
);
687 init_completion(&data
->c
);
688 INIT_DELAYED_WORK(&data
->work
, cec_wait_timeout
);
691 list_add_tail(&data
->xfer_list
, &fh
->xfer_list
);
692 list_add_tail(&data
->list
, &adap
->transmit_queue
);
693 adap
->transmit_queue_sz
++;
694 if (!adap
->transmitting
)
695 wake_up_interruptible(&adap
->kthread_waitq
);
697 /* All done if we don't need to block waiting for completion */
702 * If we don't get a completion before this time something is really
703 * wrong and we time out.
705 timeout
= CEC_XFER_TIMEOUT_MS
;
706 /* Add the requested timeout if we have to wait for a reply as well */
708 timeout
+= msg
->timeout
;
711 * Release the lock and wait, retake the lock afterwards.
713 mutex_unlock(&adap
->lock
);
714 res
= wait_for_completion_killable_timeout(&data
->c
,
715 msecs_to_jiffies(timeout
));
716 mutex_lock(&adap
->lock
);
718 if (data
->completed
) {
719 /* The transmit completed (possibly with an error) */
725 * The wait for completion timed out or was interrupted, so mark this
726 * as non-blocking and disconnect from the filehandle since it is
727 * still 'in flight'. When it finally completes it will just drop the
730 data
->blocking
= false;
732 list_del(&data
->xfer_list
);
735 if (res
== 0) { /* timed out */
736 /* Check if the reply or the transmit failed */
737 if (msg
->timeout
&& (msg
->tx_status
& CEC_TX_STATUS_OK
))
738 msg
->rx_status
= CEC_RX_STATUS_TIMEOUT
;
740 msg
->tx_status
= CEC_TX_STATUS_MAX_RETRIES
;
742 return res
> 0 ? 0 : res
;
745 /* Helper function to be used by drivers and this framework. */
746 int cec_transmit_msg(struct cec_adapter
*adap
, struct cec_msg
*msg
,
751 mutex_lock(&adap
->lock
);
752 ret
= cec_transmit_msg_fh(adap
, msg
, NULL
, block
);
753 mutex_unlock(&adap
->lock
);
756 EXPORT_SYMBOL_GPL(cec_transmit_msg
);
759 * I don't like forward references but without this the low-level
760 * cec_received_msg() function would come after a bunch of high-level
761 * CEC protocol handling functions. That was very confusing.
763 static int cec_receive_notify(struct cec_adapter
*adap
, struct cec_msg
*msg
,
766 /* Called by the CEC adapter if a message is received */
767 void cec_received_msg(struct cec_adapter
*adap
, struct cec_msg
*msg
)
769 struct cec_data
*data
;
770 u8 msg_init
= cec_msg_initiator(msg
);
771 u8 msg_dest
= cec_msg_destination(msg
);
772 bool is_reply
= false;
773 bool valid_la
= true;
775 if (WARN_ON(!msg
->len
|| msg
->len
> CEC_MAX_MSG_SIZE
))
778 msg
->rx_ts
= ktime_get_ns();
779 msg
->rx_status
= CEC_RX_STATUS_OK
;
780 msg
->sequence
= msg
->reply
= msg
->timeout
= 0;
784 memset(msg
->msg
+ msg
->len
, 0, sizeof(msg
->msg
) - msg
->len
);
786 mutex_lock(&adap
->lock
);
787 dprintk(2, "cec_received_msg: %*ph\n", msg
->len
, msg
->msg
);
789 /* Check if this message was for us (directed or broadcast). */
790 if (!cec_msg_is_broadcast(msg
))
791 valid_la
= cec_has_log_addr(adap
, msg_dest
);
793 /* It's a valid message and not a poll or CDC message */
794 if (valid_la
&& msg
->len
> 1 && msg
->msg
[1] != CEC_MSG_CDC_MESSAGE
) {
795 u8 cmd
= msg
->msg
[1];
796 bool abort
= cmd
== CEC_MSG_FEATURE_ABORT
;
798 /* The aborted command is in msg[2] */
803 * Walk over all transmitted messages that are waiting for a
806 list_for_each_entry(data
, &adap
->wait_queue
, list
) {
807 struct cec_msg
*dst
= &data
->msg
;
809 /* Does the command match? */
810 if ((abort
&& cmd
!= dst
->msg
[1]) ||
811 (!abort
&& cmd
!= dst
->reply
))
814 /* Does the addressing match? */
815 if (msg_init
!= cec_msg_destination(dst
) &&
816 !cec_msg_is_broadcast(dst
))
820 memcpy(dst
->msg
, msg
->msg
, msg
->len
);
822 dst
->rx_ts
= msg
->rx_ts
;
823 dst
->rx_status
= msg
->rx_status
;
825 dst
->rx_status
|= CEC_RX_STATUS_FEATURE_ABORT
;
826 /* Remove it from the wait_queue */
827 list_del_init(&data
->list
);
829 /* Cancel the pending timeout work */
830 if (!cancel_delayed_work(&data
->work
)) {
831 mutex_unlock(&adap
->lock
);
832 flush_scheduled_work();
833 mutex_lock(&adap
->lock
);
836 * Mark this as a reply, provided someone is still
837 * waiting for the answer.
841 cec_data_completed(data
);
845 mutex_unlock(&adap
->lock
);
847 /* Pass the message on to any monitoring filehandles */
848 cec_queue_msg_monitor(adap
, msg
, valid_la
);
850 /* We're done if it is not for us or a poll message */
851 if (!valid_la
|| msg
->len
<= 1)
855 * Process the message on the protocol level. If is_reply is true,
856 * then cec_receive_notify() won't pass on the reply to the listener(s)
857 * since that was already done by cec_data_completed() above.
859 cec_receive_notify(adap
, msg
, is_reply
);
861 EXPORT_SYMBOL_GPL(cec_received_msg
);
863 /* Logical Address Handling */
866 * Attempt to claim a specific logical address.
868 * This function is called with adap->lock held.
870 static int cec_config_log_addr(struct cec_adapter
*adap
,
872 unsigned int log_addr
)
874 struct cec_log_addrs
*las
= &adap
->log_addrs
;
875 struct cec_msg msg
= { };
878 if (cec_has_log_addr(adap
, log_addr
))
881 /* Send poll message */
883 msg
.msg
[0] = 0xf0 | log_addr
;
884 err
= cec_transmit_msg_fh(adap
, &msg
, NULL
, true);
887 * While trying to poll the physical address was reset
888 * and the adapter was unconfigured, so bail out.
890 if (!adap
->is_configuring
)
896 if (msg
.tx_status
& CEC_TX_STATUS_OK
)
900 * Message not acknowledged, so this logical
901 * address is free to use.
903 err
= adap
->ops
->adap_log_addr(adap
, log_addr
);
907 las
->log_addr
[idx
] = log_addr
;
908 las
->log_addr_mask
|= 1 << log_addr
;
909 adap
->phys_addrs
[log_addr
] = adap
->phys_addr
;
911 dprintk(2, "claimed addr %d (%d)\n", log_addr
,
912 las
->primary_device_type
[idx
]);
917 * Unconfigure the adapter: clear all logical addresses and send
918 * the state changed event.
920 * This function is called with adap->lock held.
922 static void cec_adap_unconfigure(struct cec_adapter
*adap
)
924 WARN_ON(adap
->ops
->adap_log_addr(adap
, CEC_LOG_ADDR_INVALID
));
925 adap
->log_addrs
.log_addr_mask
= 0;
926 adap
->is_configuring
= false;
927 adap
->is_configured
= false;
928 memset(adap
->phys_addrs
, 0xff, sizeof(adap
->phys_addrs
));
929 wake_up_interruptible(&adap
->kthread_waitq
);
930 cec_post_state_event(adap
);
934 * Attempt to claim the required logical addresses.
936 static int cec_config_thread_func(void *arg
)
938 /* The various LAs for each type of device */
939 static const u8 tv_log_addrs
[] = {
940 CEC_LOG_ADDR_TV
, CEC_LOG_ADDR_SPECIFIC
,
943 static const u8 record_log_addrs
[] = {
944 CEC_LOG_ADDR_RECORD_1
, CEC_LOG_ADDR_RECORD_2
,
945 CEC_LOG_ADDR_RECORD_3
,
946 CEC_LOG_ADDR_BACKUP_1
, CEC_LOG_ADDR_BACKUP_2
,
949 static const u8 tuner_log_addrs
[] = {
950 CEC_LOG_ADDR_TUNER_1
, CEC_LOG_ADDR_TUNER_2
,
951 CEC_LOG_ADDR_TUNER_3
, CEC_LOG_ADDR_TUNER_4
,
952 CEC_LOG_ADDR_BACKUP_1
, CEC_LOG_ADDR_BACKUP_2
,
955 static const u8 playback_log_addrs
[] = {
956 CEC_LOG_ADDR_PLAYBACK_1
, CEC_LOG_ADDR_PLAYBACK_2
,
957 CEC_LOG_ADDR_PLAYBACK_3
,
958 CEC_LOG_ADDR_BACKUP_1
, CEC_LOG_ADDR_BACKUP_2
,
961 static const u8 audiosystem_log_addrs
[] = {
962 CEC_LOG_ADDR_AUDIOSYSTEM
,
965 static const u8 specific_use_log_addrs
[] = {
966 CEC_LOG_ADDR_SPECIFIC
,
967 CEC_LOG_ADDR_BACKUP_1
, CEC_LOG_ADDR_BACKUP_2
,
970 static const u8
*type2addrs
[6] = {
971 [CEC_LOG_ADDR_TYPE_TV
] = tv_log_addrs
,
972 [CEC_LOG_ADDR_TYPE_RECORD
] = record_log_addrs
,
973 [CEC_LOG_ADDR_TYPE_TUNER
] = tuner_log_addrs
,
974 [CEC_LOG_ADDR_TYPE_PLAYBACK
] = playback_log_addrs
,
975 [CEC_LOG_ADDR_TYPE_AUDIOSYSTEM
] = audiosystem_log_addrs
,
976 [CEC_LOG_ADDR_TYPE_SPECIFIC
] = specific_use_log_addrs
,
978 static const u16 type2mask
[] = {
979 [CEC_LOG_ADDR_TYPE_TV
] = CEC_LOG_ADDR_MASK_TV
,
980 [CEC_LOG_ADDR_TYPE_RECORD
] = CEC_LOG_ADDR_MASK_RECORD
,
981 [CEC_LOG_ADDR_TYPE_TUNER
] = CEC_LOG_ADDR_MASK_TUNER
,
982 [CEC_LOG_ADDR_TYPE_PLAYBACK
] = CEC_LOG_ADDR_MASK_PLAYBACK
,
983 [CEC_LOG_ADDR_TYPE_AUDIOSYSTEM
] = CEC_LOG_ADDR_MASK_AUDIOSYSTEM
,
984 [CEC_LOG_ADDR_TYPE_SPECIFIC
] = CEC_LOG_ADDR_MASK_SPECIFIC
,
986 struct cec_adapter
*adap
= arg
;
987 struct cec_log_addrs
*las
= &adap
->log_addrs
;
991 mutex_lock(&adap
->lock
);
992 dprintk(1, "physical address: %x.%x.%x.%x, claim %d logical addresses\n",
993 cec_phys_addr_exp(adap
->phys_addr
), las
->num_log_addrs
);
994 las
->log_addr_mask
= 0;
996 if (las
->log_addr_type
[0] == CEC_LOG_ADDR_TYPE_UNREGISTERED
)
999 for (i
= 0; i
< las
->num_log_addrs
; i
++) {
1000 unsigned int type
= las
->log_addr_type
[i
];
1005 * The TV functionality can only map to physical address 0.
1006 * For any other address, try the Specific functionality
1007 * instead as per the spec.
1009 if (adap
->phys_addr
&& type
== CEC_LOG_ADDR_TYPE_TV
)
1010 type
= CEC_LOG_ADDR_TYPE_SPECIFIC
;
1012 la_list
= type2addrs
[type
];
1013 last_la
= las
->log_addr
[i
];
1014 las
->log_addr
[i
] = CEC_LOG_ADDR_INVALID
;
1015 if (last_la
== CEC_LOG_ADDR_INVALID
||
1016 last_la
== CEC_LOG_ADDR_UNREGISTERED
||
1017 !(last_la
& type2mask
[type
]))
1018 last_la
= la_list
[0];
1020 err
= cec_config_log_addr(adap
, i
, last_la
);
1021 if (err
> 0) /* Reused last LA */
1027 for (j
= 0; la_list
[j
] != CEC_LOG_ADDR_INVALID
; j
++) {
1028 /* Tried this one already, skip it */
1029 if (la_list
[j
] == last_la
)
1031 /* The backup addresses are CEC 2.0 specific */
1032 if ((la_list
[j
] == CEC_LOG_ADDR_BACKUP_1
||
1033 la_list
[j
] == CEC_LOG_ADDR_BACKUP_2
) &&
1034 las
->cec_version
< CEC_OP_CEC_VERSION_2_0
)
1037 err
= cec_config_log_addr(adap
, i
, la_list
[j
]);
1038 if (err
== 0) /* LA is in use */
1042 /* Done, claimed an LA */
1046 if (la_list
[j
] == CEC_LOG_ADDR_INVALID
)
1047 dprintk(1, "could not claim LA %d\n", i
);
1051 if (adap
->log_addrs
.log_addr_mask
== 0) {
1052 /* Fall back to unregistered */
1053 las
->log_addr
[0] = CEC_LOG_ADDR_UNREGISTERED
;
1054 las
->log_addr_mask
= 1 << las
->log_addr
[0];
1056 adap
->is_configured
= true;
1057 adap
->is_configuring
= false;
1058 cec_post_state_event(adap
);
1059 mutex_unlock(&adap
->lock
);
1061 for (i
= 0; i
< las
->num_log_addrs
; i
++) {
1062 if (las
->log_addr
[i
] == CEC_LOG_ADDR_INVALID
)
1066 * Report Features must come first according
1069 if (las
->log_addr
[i
] != CEC_LOG_ADDR_UNREGISTERED
)
1070 cec_report_features(adap
, i
);
1071 cec_report_phys_addr(adap
, i
);
1073 mutex_lock(&adap
->lock
);
1074 adap
->kthread_config
= NULL
;
1075 mutex_unlock(&adap
->lock
);
1076 complete(&adap
->config_completion
);
1080 for (i
= 0; i
< las
->num_log_addrs
; i
++)
1081 las
->log_addr
[i
] = CEC_LOG_ADDR_INVALID
;
1082 cec_adap_unconfigure(adap
);
1083 adap
->kthread_config
= NULL
;
1084 mutex_unlock(&adap
->lock
);
1085 complete(&adap
->config_completion
);
1090 * Called from either __cec_s_phys_addr or __cec_s_log_addrs to claim the
1091 * logical addresses.
1093 * This function is called with adap->lock held.
1095 static void cec_claim_log_addrs(struct cec_adapter
*adap
, bool block
)
1097 if (WARN_ON(adap
->is_configuring
|| adap
->is_configured
))
1100 init_completion(&adap
->config_completion
);
1102 /* Ready to kick off the thread */
1103 adap
->is_configuring
= true;
1104 adap
->kthread_config
= kthread_run(cec_config_thread_func
, adap
,
1105 "ceccfg-%s", adap
->name
);
1106 if (IS_ERR(adap
->kthread_config
)) {
1107 adap
->kthread_config
= NULL
;
1109 mutex_unlock(&adap
->lock
);
1110 wait_for_completion(&adap
->config_completion
);
1111 mutex_lock(&adap
->lock
);
1115 /* Set a new physical address and send an event notifying userspace of this.
1117 * This function is called with adap->lock held.
1119 void __cec_s_phys_addr(struct cec_adapter
*adap
, u16 phys_addr
, bool block
)
1121 if (phys_addr
== adap
->phys_addr
|| adap
->devnode
.unregistered
)
1124 if (phys_addr
== CEC_PHYS_ADDR_INVALID
||
1125 adap
->phys_addr
!= CEC_PHYS_ADDR_INVALID
) {
1126 adap
->phys_addr
= CEC_PHYS_ADDR_INVALID
;
1127 cec_post_state_event(adap
);
1128 cec_adap_unconfigure(adap
);
1129 /* Disabling monitor all mode should always succeed */
1130 if (adap
->monitor_all_cnt
)
1131 WARN_ON(call_op(adap
, adap_monitor_all_enable
, false));
1132 WARN_ON(adap
->ops
->adap_enable(adap
, false));
1133 if (phys_addr
== CEC_PHYS_ADDR_INVALID
)
1137 if (adap
->ops
->adap_enable(adap
, true))
1140 if (adap
->monitor_all_cnt
&&
1141 call_op(adap
, adap_monitor_all_enable
, true)) {
1142 WARN_ON(adap
->ops
->adap_enable(adap
, false));
1145 adap
->phys_addr
= phys_addr
;
1146 cec_post_state_event(adap
);
1147 if (adap
->log_addrs
.num_log_addrs
)
1148 cec_claim_log_addrs(adap
, block
);
1151 void cec_s_phys_addr(struct cec_adapter
*adap
, u16 phys_addr
, bool block
)
1153 if (IS_ERR_OR_NULL(adap
))
1156 if (WARN_ON(adap
->capabilities
& CEC_CAP_PHYS_ADDR
))
1158 mutex_lock(&adap
->lock
);
1159 __cec_s_phys_addr(adap
, phys_addr
, block
);
1160 mutex_unlock(&adap
->lock
);
1162 EXPORT_SYMBOL_GPL(cec_s_phys_addr
);
1165 * Called from either the ioctl or a driver to set the logical addresses.
1167 * This function is called with adap->lock held.
1169 int __cec_s_log_addrs(struct cec_adapter
*adap
,
1170 struct cec_log_addrs
*log_addrs
, bool block
)
1175 if (adap
->devnode
.unregistered
)
1178 if (!log_addrs
|| log_addrs
->num_log_addrs
== 0) {
1179 adap
->log_addrs
.num_log_addrs
= 0;
1180 cec_adap_unconfigure(adap
);
1184 /* Ensure the osd name is 0-terminated */
1185 log_addrs
->osd_name
[sizeof(log_addrs
->osd_name
) - 1] = '\0';
1188 if (log_addrs
->num_log_addrs
> adap
->available_log_addrs
) {
1189 dprintk(1, "num_log_addrs > %d\n", adap
->available_log_addrs
);
1194 * Vendor ID is a 24 bit number, so check if the value is
1195 * within the correct range.
1197 if (log_addrs
->vendor_id
!= CEC_VENDOR_ID_NONE
&&
1198 (log_addrs
->vendor_id
& 0xff000000) != 0)
1201 if (log_addrs
->cec_version
!= CEC_OP_CEC_VERSION_1_4
&&
1202 log_addrs
->cec_version
!= CEC_OP_CEC_VERSION_2_0
)
1205 if (log_addrs
->num_log_addrs
> 1)
1206 for (i
= 0; i
< log_addrs
->num_log_addrs
; i
++)
1207 if (log_addrs
->log_addr_type
[i
] ==
1208 CEC_LOG_ADDR_TYPE_UNREGISTERED
) {
1209 dprintk(1, "num_log_addrs > 1 can't be combined with unregistered LA\n");
1213 for (i
= 0; i
< log_addrs
->num_log_addrs
; i
++) {
1214 const u8 feature_sz
= ARRAY_SIZE(log_addrs
->features
[0]);
1215 u8
*features
= log_addrs
->features
[i
];
1216 bool op_is_dev_features
= false;
1218 log_addrs
->log_addr
[i
] = CEC_LOG_ADDR_INVALID
;
1219 if (type_mask
& (1 << log_addrs
->log_addr_type
[i
])) {
1220 dprintk(1, "duplicate logical address type\n");
1223 type_mask
|= 1 << log_addrs
->log_addr_type
[i
];
1224 if ((type_mask
& (1 << CEC_LOG_ADDR_TYPE_RECORD
)) &&
1225 (type_mask
& (1 << CEC_LOG_ADDR_TYPE_PLAYBACK
))) {
1226 /* Record already contains the playback functionality */
1227 dprintk(1, "invalid record + playback combination\n");
1230 if (log_addrs
->primary_device_type
[i
] >
1231 CEC_OP_PRIM_DEVTYPE_PROCESSOR
) {
1232 dprintk(1, "unknown primary device type\n");
1235 if (log_addrs
->primary_device_type
[i
] == 2) {
1236 dprintk(1, "invalid primary device type\n");
1239 if (log_addrs
->log_addr_type
[i
] > CEC_LOG_ADDR_TYPE_UNREGISTERED
) {
1240 dprintk(1, "unknown logical address type\n");
1243 for (i
= 0; i
< feature_sz
; i
++) {
1244 if ((features
[i
] & 0x80) == 0) {
1245 if (op_is_dev_features
)
1247 op_is_dev_features
= true;
1250 if (!op_is_dev_features
|| i
== feature_sz
) {
1251 dprintk(1, "malformed features\n");
1254 /* Zero unused part of the feature array */
1255 memset(features
+ i
+ 1, 0, feature_sz
- i
- 1);
1258 if (log_addrs
->cec_version
>= CEC_OP_CEC_VERSION_2_0
) {
1259 if (log_addrs
->num_log_addrs
> 2) {
1260 dprintk(1, "CEC 2.0 allows no more than 2 logical addresses\n");
1263 if (log_addrs
->num_log_addrs
== 2) {
1264 if (!(type_mask
& ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM
) |
1265 (1 << CEC_LOG_ADDR_TYPE_TV
)))) {
1266 dprintk(1, "Two LAs is only allowed for audiosystem and TV\n");
1269 if (!(type_mask
& ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK
) |
1270 (1 << CEC_LOG_ADDR_TYPE_RECORD
)))) {
1271 dprintk(1, "An audiosystem/TV can only be combined with record or playback\n");
1277 /* Zero unused LAs */
1278 for (i
= log_addrs
->num_log_addrs
; i
< CEC_MAX_LOG_ADDRS
; i
++) {
1279 log_addrs
->primary_device_type
[i
] = 0;
1280 log_addrs
->log_addr_type
[i
] = 0;
1281 log_addrs
->all_device_types
[i
] = 0;
1282 memset(log_addrs
->features
[i
], 0,
1283 sizeof(log_addrs
->features
[i
]));
1286 log_addrs
->log_addr_mask
= adap
->log_addrs
.log_addr_mask
;
1287 adap
->log_addrs
= *log_addrs
;
1288 if (adap
->phys_addr
!= CEC_PHYS_ADDR_INVALID
)
1289 cec_claim_log_addrs(adap
, block
);
1293 int cec_s_log_addrs(struct cec_adapter
*adap
,
1294 struct cec_log_addrs
*log_addrs
, bool block
)
1298 if (WARN_ON(adap
->capabilities
& CEC_CAP_LOG_ADDRS
))
1300 mutex_lock(&adap
->lock
);
1301 err
= __cec_s_log_addrs(adap
, log_addrs
, block
);
1302 mutex_unlock(&adap
->lock
);
1305 EXPORT_SYMBOL_GPL(cec_s_log_addrs
);
1307 /* High-level core CEC message handling */
1309 /* Transmit the Report Features message */
1310 static int cec_report_features(struct cec_adapter
*adap
, unsigned int la_idx
)
1312 struct cec_msg msg
= { };
1313 const struct cec_log_addrs
*las
= &adap
->log_addrs
;
1314 const u8
*features
= las
->features
[la_idx
];
1315 bool op_is_dev_features
= false;
1318 /* This is 2.0 and up only */
1319 if (adap
->log_addrs
.cec_version
< CEC_OP_CEC_VERSION_2_0
)
1322 /* Report Features */
1323 msg
.msg
[0] = (las
->log_addr
[la_idx
] << 4) | 0x0f;
1325 msg
.msg
[1] = CEC_MSG_REPORT_FEATURES
;
1326 msg
.msg
[2] = adap
->log_addrs
.cec_version
;
1327 msg
.msg
[3] = las
->all_device_types
[la_idx
];
1329 /* Write RC Profiles first, then Device Features */
1330 for (idx
= 0; idx
< ARRAY_SIZE(las
->features
[0]); idx
++) {
1331 msg
.msg
[msg
.len
++] = features
[idx
];
1332 if ((features
[idx
] & CEC_OP_FEAT_EXT
) == 0) {
1333 if (op_is_dev_features
)
1335 op_is_dev_features
= true;
1338 return cec_transmit_msg(adap
, &msg
, false);
1341 /* Transmit the Report Physical Address message */
1342 static int cec_report_phys_addr(struct cec_adapter
*adap
, unsigned int la_idx
)
1344 const struct cec_log_addrs
*las
= &adap
->log_addrs
;
1345 struct cec_msg msg
= { };
1347 /* Report Physical Address */
1348 msg
.msg
[0] = (las
->log_addr
[la_idx
] << 4) | 0x0f;
1349 cec_msg_report_physical_addr(&msg
, adap
->phys_addr
,
1350 las
->primary_device_type
[la_idx
]);
1351 dprintk(2, "config: la %d pa %x.%x.%x.%x\n",
1352 las
->log_addr
[la_idx
],
1353 cec_phys_addr_exp(adap
->phys_addr
));
1354 return cec_transmit_msg(adap
, &msg
, false);
1357 /* Transmit the Feature Abort message */
1358 static int cec_feature_abort_reason(struct cec_adapter
*adap
,
1359 struct cec_msg
*msg
, u8 reason
)
1361 struct cec_msg tx_msg
= { };
1364 * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT
1367 if (msg
->msg
[1] == CEC_MSG_FEATURE_ABORT
)
1369 cec_msg_set_reply_to(&tx_msg
, msg
);
1370 cec_msg_feature_abort(&tx_msg
, msg
->msg
[1], reason
);
1371 return cec_transmit_msg(adap
, &tx_msg
, false);
1374 static int cec_feature_abort(struct cec_adapter
*adap
, struct cec_msg
*msg
)
1376 return cec_feature_abort_reason(adap
, msg
,
1377 CEC_OP_ABORT_UNRECOGNIZED_OP
);
1380 static int cec_feature_refused(struct cec_adapter
*adap
, struct cec_msg
*msg
)
1382 return cec_feature_abort_reason(adap
, msg
,
1383 CEC_OP_ABORT_REFUSED
);
1387 * Called when a CEC message is received. This function will do any
1388 * necessary core processing. The is_reply bool is true if this message
1389 * is a reply to an earlier transmit.
1391 * The message is either a broadcast message or a valid directed message.
1393 static int cec_receive_notify(struct cec_adapter
*adap
, struct cec_msg
*msg
,
1396 bool is_broadcast
= cec_msg_is_broadcast(msg
);
1397 u8 dest_laddr
= cec_msg_destination(msg
);
1398 u8 init_laddr
= cec_msg_initiator(msg
);
1399 u8 devtype
= cec_log_addr2dev(adap
, dest_laddr
);
1400 int la_idx
= cec_log_addr2idx(adap
, dest_laddr
);
1401 bool is_directed
= la_idx
>= 0;
1402 bool from_unregistered
= init_laddr
== 0xf;
1403 struct cec_msg tx_cec_msg
= { };
1405 dprintk(1, "cec_receive_notify: %*ph\n", msg
->len
, msg
->msg
);
1407 if (adap
->ops
->received
) {
1408 /* Allow drivers to process the message first */
1409 if (adap
->ops
->received(adap
, msg
) != -ENOMSG
)
1414 * REPORT_PHYSICAL_ADDR, CEC_MSG_USER_CONTROL_PRESSED and
1415 * CEC_MSG_USER_CONTROL_RELEASED messages always have to be
1416 * handled by the CEC core, even if the passthrough mode is on.
1417 * The others are just ignored if passthrough mode is on.
1419 switch (msg
->msg
[1]) {
1420 case CEC_MSG_GET_CEC_VERSION
:
1421 case CEC_MSG_GIVE_DEVICE_VENDOR_ID
:
1423 case CEC_MSG_GIVE_DEVICE_POWER_STATUS
:
1424 case CEC_MSG_GIVE_PHYSICAL_ADDR
:
1425 case CEC_MSG_GIVE_OSD_NAME
:
1426 case CEC_MSG_GIVE_FEATURES
:
1428 * Skip processing these messages if the passthrough mode
1431 if (adap
->passthrough
)
1432 goto skip_processing
;
1433 /* Ignore if addressing is wrong */
1434 if (is_broadcast
|| from_unregistered
)
1438 case CEC_MSG_USER_CONTROL_PRESSED
:
1439 case CEC_MSG_USER_CONTROL_RELEASED
:
1440 /* Wrong addressing mode: don't process */
1441 if (is_broadcast
|| from_unregistered
)
1442 goto skip_processing
;
1445 case CEC_MSG_REPORT_PHYSICAL_ADDR
:
1447 * This message is always processed, regardless of the
1448 * passthrough setting.
1450 * Exception: don't process if wrong addressing mode.
1453 goto skip_processing
;
1460 cec_msg_set_reply_to(&tx_cec_msg
, msg
);
1462 switch (msg
->msg
[1]) {
1463 /* The following messages are processed but still passed through */
1464 case CEC_MSG_REPORT_PHYSICAL_ADDR
: {
1465 u16 pa
= (msg
->msg
[2] << 8) | msg
->msg
[3];
1467 if (!from_unregistered
)
1468 adap
->phys_addrs
[init_laddr
] = pa
;
1469 dprintk(1, "Reported physical address %x.%x.%x.%x for logical address %d\n",
1470 cec_phys_addr_exp(pa
), init_laddr
);
1474 case CEC_MSG_USER_CONTROL_PRESSED
:
1475 if (!(adap
->capabilities
& CEC_CAP_RC
))
1478 #if IS_REACHABLE(CONFIG_RC_CORE)
1479 switch (msg
->msg
[2]) {
1481 * Play function, this message can have variable length
1482 * depending on the specific play function that is used.
1486 rc_keydown(adap
->rc
, RC_TYPE_CEC
,
1489 rc_keydown(adap
->rc
, RC_TYPE_CEC
,
1490 msg
->msg
[2] << 8 | msg
->msg
[3], 0);
1493 * Other function messages that are not handled.
1494 * Currently the RC framework does not allow to supply an
1495 * additional parameter to a keypress. These "keys" contain
1496 * other information such as channel number, an input number
1498 * For the time being these messages are not processed by the
1499 * framework and are simply forwarded to the user space.
1501 case 0x56: case 0x57:
1502 case 0x67: case 0x68: case 0x69: case 0x6a:
1505 rc_keydown(adap
->rc
, RC_TYPE_CEC
, msg
->msg
[2], 0);
1511 case CEC_MSG_USER_CONTROL_RELEASED
:
1512 if (!(adap
->capabilities
& CEC_CAP_RC
))
1514 #if IS_REACHABLE(CONFIG_RC_CORE)
1520 * The remaining messages are only processed if the passthrough mode
1523 case CEC_MSG_GET_CEC_VERSION
:
1524 cec_msg_cec_version(&tx_cec_msg
, adap
->log_addrs
.cec_version
);
1525 return cec_transmit_msg(adap
, &tx_cec_msg
, false);
1527 case CEC_MSG_GIVE_PHYSICAL_ADDR
:
1528 /* Do nothing for CEC switches using addr 15 */
1529 if (devtype
== CEC_OP_PRIM_DEVTYPE_SWITCH
&& dest_laddr
== 15)
1531 cec_msg_report_physical_addr(&tx_cec_msg
, adap
->phys_addr
, devtype
);
1532 return cec_transmit_msg(adap
, &tx_cec_msg
, false);
1534 case CEC_MSG_GIVE_DEVICE_VENDOR_ID
:
1535 if (adap
->log_addrs
.vendor_id
== CEC_VENDOR_ID_NONE
)
1536 return cec_feature_abort(adap
, msg
);
1537 cec_msg_device_vendor_id(&tx_cec_msg
, adap
->log_addrs
.vendor_id
);
1538 return cec_transmit_msg(adap
, &tx_cec_msg
, false);
1541 /* Do nothing for CEC switches */
1542 if (devtype
== CEC_OP_PRIM_DEVTYPE_SWITCH
)
1544 return cec_feature_refused(adap
, msg
);
1546 case CEC_MSG_GIVE_OSD_NAME
: {
1547 if (adap
->log_addrs
.osd_name
[0] == 0)
1548 return cec_feature_abort(adap
, msg
);
1549 cec_msg_set_osd_name(&tx_cec_msg
, adap
->log_addrs
.osd_name
);
1550 return cec_transmit_msg(adap
, &tx_cec_msg
, false);
1553 case CEC_MSG_GIVE_FEATURES
:
1554 if (adap
->log_addrs
.cec_version
>= CEC_OP_CEC_VERSION_2_0
)
1555 return cec_report_features(adap
, la_idx
);
1560 * Unprocessed messages are aborted if userspace isn't doing
1561 * any processing either.
1563 if (is_directed
&& !is_reply
&& !adap
->follower_cnt
&&
1564 !adap
->cec_follower
&& msg
->msg
[1] != CEC_MSG_FEATURE_ABORT
)
1565 return cec_feature_abort(adap
, msg
);
1570 /* If this was a reply, then we're done */
1575 * Send to the exclusive follower if there is one, otherwise send
1578 if (adap
->cec_follower
)
1579 cec_queue_msg_fh(adap
->cec_follower
, msg
);
1581 cec_queue_msg_followers(adap
, msg
);
1586 * Helper functions to keep track of the 'monitor all' use count.
1588 * These functions are called with adap->lock held.
1590 int cec_monitor_all_cnt_inc(struct cec_adapter
*adap
)
1594 if (adap
->monitor_all_cnt
== 0)
1595 ret
= call_op(adap
, adap_monitor_all_enable
, 1);
1597 adap
->monitor_all_cnt
++;
1601 void cec_monitor_all_cnt_dec(struct cec_adapter
*adap
)
1603 adap
->monitor_all_cnt
--;
1604 if (adap
->monitor_all_cnt
== 0)
1605 WARN_ON(call_op(adap
, adap_monitor_all_enable
, 0));
1608 #ifdef CONFIG_MEDIA_CEC_DEBUG
1610 * Log the current state of the CEC adapter.
1611 * Very useful for debugging.
1613 int cec_adap_status(struct seq_file
*file
, void *priv
)
1615 struct cec_adapter
*adap
= dev_get_drvdata(file
->private);
1616 struct cec_data
*data
;
1618 mutex_lock(&adap
->lock
);
1619 seq_printf(file
, "configured: %d\n", adap
->is_configured
);
1620 seq_printf(file
, "configuring: %d\n", adap
->is_configuring
);
1621 seq_printf(file
, "phys_addr: %x.%x.%x.%x\n",
1622 cec_phys_addr_exp(adap
->phys_addr
));
1623 seq_printf(file
, "number of LAs: %d\n", adap
->log_addrs
.num_log_addrs
);
1624 seq_printf(file
, "LA mask: 0x%04x\n", adap
->log_addrs
.log_addr_mask
);
1625 if (adap
->cec_follower
)
1626 seq_printf(file
, "has CEC follower%s\n",
1627 adap
->passthrough
? " (in passthrough mode)" : "");
1628 if (adap
->cec_initiator
)
1629 seq_puts(file
, "has CEC initiator\n");
1630 if (adap
->monitor_all_cnt
)
1631 seq_printf(file
, "file handles in Monitor All mode: %u\n",
1632 adap
->monitor_all_cnt
);
1633 data
= adap
->transmitting
;
1635 seq_printf(file
, "transmitting message: %*ph (reply: %02x, timeout: %ums)\n",
1636 data
->msg
.len
, data
->msg
.msg
, data
->msg
.reply
,
1638 seq_printf(file
, "pending transmits: %u\n", adap
->transmit_queue_sz
);
1639 list_for_each_entry(data
, &adap
->transmit_queue
, list
) {
1640 seq_printf(file
, "queued tx message: %*ph (reply: %02x, timeout: %ums)\n",
1641 data
->msg
.len
, data
->msg
.msg
, data
->msg
.reply
,
1644 list_for_each_entry(data
, &adap
->wait_queue
, list
) {
1645 seq_printf(file
, "message waiting for reply: %*ph (reply: %02x, timeout: %ums)\n",
1646 data
->msg
.len
, data
->msg
.msg
, data
->msg
.reply
,
1650 call_void_op(adap
, adap_status
, file
);
1651 mutex_unlock(&adap
->lock
);