drivers/usb/host/ehci.h

   1 /*
   2  * Copyright (c) 2001-2002 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 #ifndef __LINUX_EHCI_HCD_H
  20 #define __LINUX_EHCI_HCD_H
  21
  22 /* definitions used for the EHCI driver */
  23
  24 /*
  25  * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
  26  * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
  27  * the host controller implementation.
  28  *
  29  * To facilitate the strongest possible byte-order checking from "sparse"
  30  * and so on, we use __leXX unless that's not practical.
  31  */
  32 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
  33 typedef __u32 __bitwise __hc32;
  34 typedef __u16 __bitwise __hc16;
  35 #else
  36 #define __hc32  __le32
  37 #define __hc16  __le16
  38 #endif
  39
  40 /* statistics can be kept for tuning/monitoring */
  41 #ifdef CONFIG_DYNAMIC_DEBUG
  42 #define EHCI_STATS
  43 #endif
  44
  45 struct ehci_stats {
  46         /* irq usage */
  47         unsigned long           normal;
  48         unsigned long           error;
  49         unsigned long           iaa;
  50         unsigned long           lost_iaa;
  51
  52         /* termination of urbs from core */
  53         unsigned long           complete;
  54         unsigned long           unlink;
  55 };
  56
  57 /*
  58  * Scheduling and budgeting information for periodic transfers, for both
  59  * high-speed devices and full/low-speed devices lying behind a TT.
  60  */
  61 struct ehci_per_sched {
  62         struct usb_device       *udev;          /* access to the TT */
  63         struct usb_host_endpoint *ep;
  64         struct list_head        ps_list;        /* node on ehci_tt's ps_list */
  65         u16                     tt_usecs;       /* time on the FS/LS bus */
  66         u16                     cs_mask;        /* C-mask and S-mask bytes */
  67         u16                     period;         /* actual period in frames */
  68         u16                     phase;          /* actual phase, frame part */
  69         u8                      bw_phase;       /* same, for bandwidth
  70                                                    reservation */
  71         u8                      phase_uf;       /* uframe part of the phase */
  72         u8                      usecs, c_usecs; /* times on the HS bus */
  73         u8                      bw_uperiod;     /* period in microframes, for
  74                                                    bandwidth reservation */
  75         u8                      bw_period;      /* same, in frames */
  76 };
  77 #define NO_FRAME        29999                   /* frame not assigned yet */
  78
  79 /* ehci_hcd->lock guards shared data against other CPUs:
  80  *   ehci_hcd:  async, unlink, periodic (and shadow), ...
  81  *   usb_host_endpoint: hcpriv
  82  *   ehci_qh:   qh_next, qtd_list
  83  *   ehci_qtd:  qtd_list
  84  *
  85  * Also, hold this lock when talking to HC registers or
  86  * when updating hw_* fields in shared qh/qtd/... structures.
  87  */
  88
  89 #define EHCI_MAX_ROOT_PORTS     15              /* see HCS_N_PORTS */
  90
  91 /*
  92  * ehci_rh_state values of EHCI_RH_RUNNING or above mean that the
  93  * controller may be doing DMA.  Lower values mean there's no DMA.
  94  */
  95 enum ehci_rh_state {
  96         EHCI_RH_HALTED,
  97         EHCI_RH_SUSPENDED,
  98         EHCI_RH_RUNNING,
  99         EHCI_RH_STOPPING
 100 };
 101
 102 /*
 103  * Timer events, ordered by increasing delay length.
 104  * Always update event_delays_ns[] and event_handlers[] (defined in
 105  * ehci-timer.c) in parallel with this list.
 106  */
 107 enum ehci_hrtimer_event {
 108         EHCI_HRTIMER_POLL_ASS,          /* Poll for async schedule off */
 109         EHCI_HRTIMER_POLL_PSS,          /* Poll for periodic schedule off */
 110         EHCI_HRTIMER_POLL_DEAD,         /* Wait for dead controller to stop */
 111         EHCI_HRTIMER_UNLINK_INTR,       /* Wait for interrupt QH unlink */
 112         EHCI_HRTIMER_FREE_ITDS,         /* Wait for unused iTDs and siTDs */
 113         EHCI_HRTIMER_ACTIVE_UNLINK,     /* Wait while unlinking an active QH */
 114         EHCI_HRTIMER_START_UNLINK_INTR, /* Unlink empty interrupt QHs */
 115         EHCI_HRTIMER_ASYNC_UNLINKS,     /* Unlink empty async QHs */
 116         EHCI_HRTIMER_IAA_WATCHDOG,      /* Handle lost IAA interrupts */
 117         EHCI_HRTIMER_DISABLE_PERIODIC,  /* Wait to disable periodic sched */
 118         EHCI_HRTIMER_DISABLE_ASYNC,     /* Wait to disable async sched */
 119         EHCI_HRTIMER_IO_WATCHDOG,       /* Check for missing IRQs */
 120         EHCI_HRTIMER_NUM_EVENTS         /* Must come last */
 121 };
 122 #define EHCI_HRTIMER_NO_EVENT   99
 123
 124 struct ehci_hcd {                       /* one per controller */
 125         /* timing support */
 126         enum ehci_hrtimer_event next_hrtimer_event;
 127         unsigned                enabled_hrtimer_events;
 128         ktime_t                 hr_timeouts[EHCI_HRTIMER_NUM_EVENTS];
 129         struct hrtimer          hrtimer;
 130
 131         int                     PSS_poll_count;
 132         int                     ASS_poll_count;
 133         int                     died_poll_count;
 134
 135         /* glue to PCI and HCD framework */
 136         struct ehci_caps __iomem *caps;
 137         struct ehci_regs __iomem *regs;
 138         struct ehci_dbg_port __iomem *debug;
 139
 140         __u32                   hcs_params;     /* cached register copy */
 141         spinlock_t              lock;
 142         enum ehci_rh_state      rh_state;
 143
 144         /* general schedule support */
 145         bool                    scanning:1;
 146         bool                    need_rescan:1;
 147         bool                    intr_unlinking:1;
 148         bool                    iaa_in_progress:1;
 149         bool                    async_unlinking:1;
 150         bool                    shutdown:1;
 151         struct ehci_qh          *qh_scan_next;
 152
 153         /* async schedule support */
 154         struct ehci_qh          *async;
 155         struct ehci_qh          *dummy;         /* For AMD quirk use */
 156         struct list_head        async_unlink;
 157         struct list_head        async_idle;
 158         unsigned                async_unlink_cycle;
 159         unsigned                async_count;    /* async activity count */
 160         __hc32                  old_current;    /* Test for QH becoming */
 161         __hc32                  old_token;      /*  inactive during unlink */
 162
 163         /* periodic schedule support */
 164 #define DEFAULT_I_TDPS          1024            /* some HCs can do less */
 165         unsigned                periodic_size;
 166         __hc32                  *periodic;      /* hw periodic table */
 167         dma_addr_t              periodic_dma;
 168         struct list_head        intr_qh_list;
 169         unsigned                i_thresh;       /* uframes HC might cache */
 170
 171         union ehci_shadow       *pshadow;       /* mirror hw periodic table */
 172         struct list_head        intr_unlink_wait;
 173         struct list_head        intr_unlink;
 174         unsigned                intr_unlink_wait_cycle;
 175         unsigned                intr_unlink_cycle;
 176         unsigned                now_frame;      /* frame from HC hardware */
 177         unsigned                last_iso_frame; /* last frame scanned for iso */
 178         unsigned                intr_count;     /* intr activity count */
 179         unsigned                isoc_count;     /* isoc activity count */
 180         unsigned                periodic_count; /* periodic activity count */
 181         unsigned                uframe_periodic_max; /* max periodic time per uframe */
 182
 183
 184         /* list of itds & sitds completed while now_frame was still active */
 185         struct list_head        cached_itd_list;
 186         struct ehci_itd         *last_itd_to_free;
 187         struct list_head        cached_sitd_list;
 188         struct ehci_sitd        *last_sitd_to_free;
 189
 190         /* per root hub port */
 191         unsigned long           reset_done[EHCI_MAX_ROOT_PORTS];
 192
 193         /* bit vectors (one bit per port) */
 194         unsigned long           bus_suspended;          /* which ports were
 195                         already suspended at the start of a bus suspend */
 196         unsigned long           companion_ports;        /* which ports are
 197                         dedicated to the companion controller */
 198         unsigned long           owned_ports;            /* which ports are
 199                         owned by the companion during a bus suspend */
 200         unsigned long           port_c_suspend;         /* which ports have
 201                         the change-suspend feature turned on */
 202         unsigned long           suspended_ports;        /* which ports are
 203                         suspended */
 204         unsigned long           resuming_ports;         /* which ports have
 205                         started to resume */
 206
 207         /* per-HC memory pools (could be per-bus, but ...) */
 208         struct dma_pool         *qh_pool;       /* qh per active urb */
 209         struct dma_pool         *qtd_pool;      /* one or more per qh */
 210         struct dma_pool         *itd_pool;      /* itd per iso urb */
 211         struct dma_pool         *sitd_pool;     /* sitd per split iso urb */
 212
 213         unsigned                random_frame;
 214         unsigned long           next_statechange;
 215         ktime_t                 last_periodic_enable;
 216         u32                     command;
 217
 218         /* SILICON QUIRKS */
 219         unsigned                no_selective_suspend:1;
 220         unsigned                has_fsl_port_bug:1; /* FreeScale */
 221         unsigned                has_fsl_hs_errata:1;    /* Freescale HS quirk */
 222         unsigned                big_endian_mmio:1;
 223         unsigned                big_endian_desc:1;
 224         unsigned                big_endian_capbase:1;
 225         unsigned                has_amcc_usb23:1;
 226         unsigned                need_io_watchdog:1;
 227         unsigned                amd_pll_fix:1;
 228         unsigned                use_dummy_qh:1; /* AMD Frame List table quirk*/
 229         unsigned                has_synopsys_hc_bug:1; /* Synopsys HC */
 230         unsigned                frame_index_bug:1; /* MosChip (AKA NetMos) */
 231         unsigned                need_oc_pp_cycle:1; /* MPC834X port power */
 232         unsigned                imx28_write_fix:1; /* For Freescale i.MX28 */
 233
 234         /* required for usb32 quirk */
 235         #define OHCI_CTRL_HCFS          (3 << 6)
 236         #define OHCI_USB_OPER           (2 << 6)
 237         #define OHCI_USB_SUSPEND        (3 << 6)
 238
 239         #define OHCI_HCCTRL_OFFSET      0x4
 240         #define OHCI_HCCTRL_LEN         0x4
 241         __hc32                  *ohci_hcctrl_reg;
 242         unsigned                has_hostpc:1;
 243         unsigned                has_tdi_phy_lpm:1;
 244         unsigned                has_ppcd:1; /* support per-port change bits */
 245         u8                      sbrn;           /* packed release number */
 246
 247         /* irq statistics */
 248 #ifdef EHCI_STATS
 249         struct ehci_stats       stats;
 250 #       define COUNT(x) ((x)++)
 251 #else
 252 #       define COUNT(x)
 253 #endif
 254
 255         /* debug files */
 256 #ifdef CONFIG_DYNAMIC_DEBUG
 257         struct dentry           *debug_dir;
 258 #endif
 259
 260         /* bandwidth usage */
 261 #define EHCI_BANDWIDTH_SIZE     64
 262 #define EHCI_BANDWIDTH_FRAMES   (EHCI_BANDWIDTH_SIZE >> 3)
 263         u8                      bandwidth[EHCI_BANDWIDTH_SIZE];
 264                                                 /* us allocated per uframe */
 265         u8                      tt_budget[EHCI_BANDWIDTH_SIZE];
 266                                                 /* us budgeted per uframe */
 267         struct list_head        tt_list;
 268
 269         /* platform-specific data -- must come last */
 270         unsigned long           priv[0] __aligned(sizeof(s64));
 271 };
 272
 273 /* convert between an HCD pointer and the corresponding EHCI_HCD */
 274 static inline struct ehci_hcd *hcd_to_ehci(struct usb_hcd *hcd)
 275 {
 276         return (struct ehci_hcd *) (hcd->hcd_priv);
 277 }
 278 static inline struct usb_hcd *ehci_to_hcd(struct ehci_hcd *ehci)
 279 {
 280         return container_of((void *) ehci, struct usb_hcd, hcd_priv);
 281 }
 282
 283 /*-------------------------------------------------------------------------*/
 284
 285 #include <linux/usb/ehci_def.h>
 286
 287 /*-------------------------------------------------------------------------*/
 288
 289 #define QTD_NEXT(ehci, dma)     cpu_to_hc32(ehci, (u32)dma)
 290
 291 /*
 292  * EHCI Specification 0.95 Section 3.5
 293  * QTD: describe data transfer components (buffer, direction, ...)
 294  * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
 295  *
 296  * These are associated only with "QH" (Queue Head) structures,
 297  * used with control, bulk, and interrupt transfers.
 298  */
 299 struct ehci_qtd {
 300         /* first part defined by EHCI spec */
 301         __hc32                  hw_next;        /* see EHCI 3.5.1 */
 302         __hc32                  hw_alt_next;    /* see EHCI 3.5.2 */
 303         __hc32                  hw_token;       /* see EHCI 3.5.3 */
 304 #define QTD_TOGGLE      (1 << 31)       /* data toggle */
 305 #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
 306 #define QTD_IOC         (1 << 15)       /* interrupt on complete */
 307 #define QTD_CERR(tok)   (((tok)>>10) & 0x3)
 308 #define QTD_PID(tok)    (((tok)>>8) & 0x3)
 309 #define QTD_STS_ACTIVE  (1 << 7)        /* HC may execute this */
 310 #define QTD_STS_HALT    (1 << 6)        /* halted on error */
 311 #define QTD_STS_DBE     (1 << 5)        /* data buffer error (in HC) */
 312 #define QTD_STS_BABBLE  (1 << 4)        /* device was babbling (qtd halted) */
 313 #define QTD_STS_XACT    (1 << 3)        /* device gave illegal response */
 314 #define QTD_STS_MMF     (1 << 2)        /* incomplete split transaction */
 315 #define QTD_STS_STS     (1 << 1)        /* split transaction state */
 316 #define QTD_STS_PING    (1 << 0)        /* issue PING? */
 317
 318 #define ACTIVE_BIT(ehci)        cpu_to_hc32(ehci, QTD_STS_ACTIVE)
 319 #define HALT_BIT(ehci)          cpu_to_hc32(ehci, QTD_STS_HALT)
 320 #define STATUS_BIT(ehci)        cpu_to_hc32(ehci, QTD_STS_STS)
 321
 322         __hc32                  hw_buf[5];        /* see EHCI 3.5.4 */
 323         __hc32                  hw_buf_hi[5];        /* Appendix B */
 324
 325         /* the rest is HCD-private */
 326         dma_addr_t              qtd_dma;                /* qtd address */
 327         struct list_head        qtd_list;               /* sw qtd list */
 328         struct urb              *urb;                   /* qtd's urb */
 329         size_t                  length;                 /* length of buffer */
 330 } __attribute__ ((aligned (32)));
 331
 332 /* mask NakCnt+T in qh->hw_alt_next */
 333 #define QTD_MASK(ehci)  cpu_to_hc32(ehci, ~0x1f)
 334
 335 #define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
 336
 337 /*-------------------------------------------------------------------------*/
 338
 339 /* type tag from {qh,itd,sitd,fstn}->hw_next */
 340 #define Q_NEXT_TYPE(ehci,dma)   ((dma) & cpu_to_hc32(ehci, 3 << 1))
 341
 342 /*
 343  * Now the following defines are not converted using the
 344  * cpu_to_le32() macro anymore, since we have to support
 345  * "dynamic" switching between be and le support, so that the driver
 346  * can be used on one system with SoC EHCI controller using big-endian
 347  * descriptors as well as a normal little-endian PCI EHCI controller.
 348  */
 349 /* values for that type tag */
 350 #define Q_TYPE_ITD      (0 << 1)
 351 #define Q_TYPE_QH       (1 << 1)
 352 #define Q_TYPE_SITD     (2 << 1)
 353 #define Q_TYPE_FSTN     (3 << 1)
 354
 355 /* next async queue entry, or pointer to interrupt/periodic QH */
 356 #define QH_NEXT(ehci,dma)       (cpu_to_hc32(ehci, (((u32)dma)&~0x01f)|Q_TYPE_QH))
 357
 358 /* for periodic/async schedules and qtd lists, mark end of list */
 359 #define EHCI_LIST_END(ehci)     cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
 360
 361 /*
 362  * Entries in periodic shadow table are pointers to one of four kinds
 363  * of data structure.  That's dictated by the hardware; a type tag is
 364  * encoded in the low bits of the hardware's periodic schedule.  Use
 365  * Q_NEXT_TYPE to get the tag.
 366  *
 367  * For entries in the async schedule, the type tag always says "qh".
 368  */
 369 union ehci_shadow {
 370         struct ehci_qh          *qh;            /* Q_TYPE_QH */
 371         struct ehci_itd         *itd;           /* Q_TYPE_ITD */
 372         struct ehci_sitd        *sitd;          /* Q_TYPE_SITD */
 373         struct ehci_fstn        *fstn;          /* Q_TYPE_FSTN */
 374         __hc32                  *hw_next;       /* (all types) */
 375         void                    *ptr;
 376 };
 377
 378 /*-------------------------------------------------------------------------*/
 379
 380 /*
 381  * EHCI Specification 0.95 Section 3.6
 382  * QH: describes control/bulk/interrupt endpoints
 383  * See Fig 3-7 "Queue Head Structure Layout".
 384  *
 385  * These appear in both the async and (for interrupt) periodic schedules.
 386  */
 387
 388 /* first part defined by EHCI spec */
 389 struct ehci_qh_hw {
 390         __hc32                  hw_next;        /* see EHCI 3.6.1 */
 391         __hc32                  hw_info1;       /* see EHCI 3.6.2 */
 392 #define QH_CONTROL_EP   (1 << 27)       /* FS/LS control endpoint */
 393 #define QH_HEAD         (1 << 15)       /* Head of async reclamation list */
 394 #define QH_TOGGLE_CTL   (1 << 14)       /* Data toggle control */
 395 #define QH_HIGH_SPEED   (2 << 12)       /* Endpoint speed */
 396 #define QH_LOW_SPEED    (1 << 12)
 397 #define QH_FULL_SPEED   (0 << 12)
 398 #define QH_INACTIVATE   (1 << 7)        /* Inactivate on next transaction */
 399         __hc32                  hw_info2;        /* see EHCI 3.6.2 */
 400 #define QH_SMASK        0x000000ff
 401 #define QH_CMASK        0x0000ff00
 402 #define QH_HUBADDR      0x007f0000
 403 #define QH_HUBPORT      0x3f800000
 404 #define QH_MULT         0xc0000000
 405         __hc32                  hw_current;     /* qtd list - see EHCI 3.6.4 */
 406
 407         /* qtd overlay (hardware parts of a struct ehci_qtd) */
 408         __hc32                  hw_qtd_next;
 409         __hc32                  hw_alt_next;
 410         __hc32                  hw_token;
 411         __hc32                  hw_buf[5];
 412         __hc32                  hw_buf_hi[5];
 413 } __attribute__ ((aligned(32)));
 414
 415 struct ehci_qh {
 416         struct ehci_qh_hw       *hw;            /* Must come first */
 417         /* the rest is HCD-private */
 418         dma_addr_t              qh_dma;         /* address of qh */
 419         union ehci_shadow       qh_next;        /* ptr to qh; or periodic */
 420         struct list_head        qtd_list;       /* sw qtd list */
 421         struct list_head        intr_node;      /* list of intr QHs */
 422         struct ehci_qtd         *dummy;
 423         struct list_head        unlink_node;
 424         struct ehci_per_sched   ps;             /* scheduling info */
 425
 426         unsigned                unlink_cycle;
 427
 428         u8                      qh_state;
 429 #define QH_STATE_LINKED         1               /* HC sees this */
 430 #define QH_STATE_UNLINK         2               /* HC may still see this */
 431 #define QH_STATE_IDLE           3               /* HC doesn't see this */
 432 #define QH_STATE_UNLINK_WAIT    4               /* LINKED and on unlink q */
 433 #define QH_STATE_COMPLETING     5               /* don't touch token.HALT */
 434
 435         u8                      xacterrs;       /* XactErr retry counter */
 436 #define QH_XACTERR_MAX          32              /* XactErr retry limit */
 437
 438         u8                      unlink_reason;
 439 #define QH_UNLINK_HALTED        0x01            /* Halt flag is set */
 440 #define QH_UNLINK_SHORT_READ    0x02            /* Recover from a short read */
 441 #define QH_UNLINK_DUMMY_OVERLAY 0x04            /* QH overlayed the dummy TD */
 442 #define QH_UNLINK_SHUTDOWN      0x08            /* The HC isn't running */
 443 #define QH_UNLINK_QUEUE_EMPTY   0x10            /* Reached end of the queue */
 444 #define QH_UNLINK_REQUESTED     0x20            /* Disable, reset, or dequeue */
 445
 446         u8                      gap_uf;         /* uframes split/csplit gap */
 447
 448         unsigned                is_out:1;       /* bulk or intr OUT */
 449         unsigned                clearing_tt:1;  /* Clear-TT-Buf in progress */
 450         unsigned                dequeue_during_giveback:1;
 451         unsigned                should_be_inactive:1;
 452 };
 453
 454 /*-------------------------------------------------------------------------*/
 455
 456 /* description of one iso transaction (up to 3 KB data if highspeed) */
 457 struct ehci_iso_packet {
 458         /* These will be copied to iTD when scheduling */
 459         u64                     bufp;           /* itd->hw_bufp{,_hi}[pg] |= */
 460         __hc32                  transaction;    /* itd->hw_transaction[i] |= */
 461         u8                      cross;          /* buf crosses pages */
 462         /* for full speed OUT splits */
 463         u32                     buf1;
 464 };
 465
 466 /* temporary schedule data for packets from iso urbs (both speeds)
 467  * each packet is one logical usb transaction to the device (not TT),
 468  * beginning at stream->next_uframe
 469  */
 470 struct ehci_iso_sched {
 471         struct list_head        td_list;
 472         unsigned                span;
 473         unsigned                first_packet;
 474         struct ehci_iso_packet  packet[0];
 475 };
 476
 477 /*
 478  * ehci_iso_stream - groups all (s)itds for this endpoint.
 479  * acts like a qh would, if EHCI had them for ISO.
 480  */
 481 struct ehci_iso_stream {
 482         /* first field matches ehci_hq, but is NULL */
 483         struct ehci_qh_hw       *hw;
 484
 485         u8                      bEndpointAddress;
 486         u8                      highspeed;
 487         struct list_head        td_list;        /* queued itds/sitds */
 488         struct list_head        free_list;      /* list of unused itds/sitds */
 489
 490         /* output of (re)scheduling */
 491         struct ehci_per_sched   ps;             /* scheduling info */
 492         unsigned                next_uframe;
 493         __hc32                  splits;
 494
 495         /* the rest is derived from the endpoint descriptor,
 496          * including the extra info for hw_bufp[0..2]
 497          */
 498         u16                     uperiod;        /* period in uframes */
 499         u16                     maxp;
 500         unsigned                bandwidth;
 501
 502         /* This is used to initialize iTD's hw_bufp fields */
 503         __hc32                  buf0;
 504         __hc32                  buf1;
 505         __hc32                  buf2;
 506
 507         /* this is used to initialize sITD's tt info */
 508         __hc32                  address;
 509 };
 510
 511 /*-------------------------------------------------------------------------*/
 512
 513 /*
 514  * EHCI Specification 0.95 Section 3.3
 515  * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
 516  *
 517  * Schedule records for high speed iso xfers
 518  */
 519 struct ehci_itd {
 520         /* first part defined by EHCI spec */
 521         __hc32                  hw_next;           /* see EHCI 3.3.1 */
 522         __hc32                  hw_transaction[8]; /* see EHCI 3.3.2 */
 523 #define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
 524 #define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
 525 #define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
 526 #define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
 527 #define EHCI_ITD_LENGTH(tok)    (((tok)>>16) & 0x0fff)
 528 #define EHCI_ITD_IOC            (1 << 15)       /* interrupt on complete */
 529
 530 #define ITD_ACTIVE(ehci)        cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
 531
 532         __hc32                  hw_bufp[7];     /* see EHCI 3.3.3 */
 533         __hc32                  hw_bufp_hi[7];  /* Appendix B */
 534
 535         /* the rest is HCD-private */
 536         dma_addr_t              itd_dma;        /* for this itd */
 537         union ehci_shadow       itd_next;       /* ptr to periodic q entry */
 538
 539         struct urb              *urb;
 540         struct ehci_iso_stream  *stream;        /* endpoint's queue */
 541         struct list_head        itd_list;       /* list of stream's itds */
 542
 543         /* any/all hw_transactions here may be used by that urb */
 544         unsigned                frame;          /* where scheduled */
 545         unsigned                pg;
 546         unsigned                index[8];       /* in urb->iso_frame_desc */
 547 } __attribute__ ((aligned (32)));
 548
 549 /*-------------------------------------------------------------------------*/
 550
 551 /*
 552  * EHCI Specification 0.95 Section 3.4
 553  * siTD, aka split-transaction isochronous Transfer Descriptor
 554  *       ... describe full speed iso xfers through TT in hubs
 555  * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
 556  */
 557 struct ehci_sitd {
 558         /* first part defined by EHCI spec */
 559         __hc32                  hw_next;
 560 /* uses bit field macros above - see EHCI 0.95 Table 3-8 */
 561         __hc32                  hw_fullspeed_ep;        /* EHCI table 3-9 */
 562         __hc32                  hw_uframe;              /* EHCI table 3-10 */
 563         __hc32                  hw_results;             /* EHCI table 3-11 */
 564 #define SITD_IOC        (1 << 31)       /* interrupt on completion */
 565 #define SITD_PAGE       (1 << 30)       /* buffer 0/1 */
 566 #define SITD_LENGTH(x)  (0x3ff & ((x)>>16))
 567 #define SITD_STS_ACTIVE (1 << 7)        /* HC may execute this */
 568 #define SITD_STS_ERR    (1 << 6)        /* error from TT */
 569 #define SITD_STS_DBE    (1 << 5)        /* data buffer error (in HC) */
 570 #define SITD_STS_BABBLE (1 << 4)        /* device was babbling */
 571 #define SITD_STS_XACT   (1 << 3)        /* illegal IN response */
 572 #define SITD_STS_MMF    (1 << 2)        /* incomplete split transaction */
 573 #define SITD_STS_STS    (1 << 1)        /* split transaction state */
 574
 575 #define SITD_ACTIVE(ehci)       cpu_to_hc32(ehci, SITD_STS_ACTIVE)
 576
 577         __hc32                  hw_buf[2];              /* EHCI table 3-12 */
 578         __hc32                  hw_backpointer;         /* EHCI table 3-13 */
 579         __hc32                  hw_buf_hi[2];           /* Appendix B */
 580
 581         /* the rest is HCD-private */
 582         dma_addr_t              sitd_dma;
 583         union ehci_shadow       sitd_next;      /* ptr to periodic q entry */
 584
 585         struct urb              *urb;
 586         struct ehci_iso_stream  *stream;        /* endpoint's queue */
 587         struct list_head        sitd_list;      /* list of stream's sitds */
 588         unsigned                frame;
 589         unsigned                index;
 590 } __attribute__ ((aligned (32)));
 591
 592 /*-------------------------------------------------------------------------*/
 593
 594 /*
 595  * EHCI Specification 0.96 Section 3.7
 596  * Periodic Frame Span Traversal Node (FSTN)
 597  *
 598  * Manages split interrupt transactions (using TT) that span frame boundaries
 599  * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
 600  * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
 601  * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
 602  */
 603 struct ehci_fstn {
 604         __hc32                  hw_next;        /* any periodic q entry */
 605         __hc32                  hw_prev;        /* qh or EHCI_LIST_END */
 606
 607         /* the rest is HCD-private */
 608         dma_addr_t              fstn_dma;
 609         union ehci_shadow       fstn_next;      /* ptr to periodic q entry */
 610 } __attribute__ ((aligned (32)));
 611
 612 /*-------------------------------------------------------------------------*/
 613
 614 /*
 615  * USB-2.0 Specification Sections 11.14 and 11.18
 616  * Scheduling and budgeting split transactions using TTs
 617  *
 618  * A hub can have a single TT for all its ports, or multiple TTs (one for each
 619  * port).  The bandwidth and budgeting information for the full/low-speed bus
 620  * below each TT is self-contained and independent of the other TTs or the
 621  * high-speed bus.
 622  *
 623  * "Bandwidth" refers to the number of microseconds on the FS/LS bus allocated
 624  * to an interrupt or isochronous endpoint for each frame.  "Budget" refers to
 625  * the best-case estimate of the number of full-speed bytes allocated to an
 626  * endpoint for each microframe within an allocated frame.
 627  *
 628  * Removal of an endpoint invalidates a TT's budget.  Instead of trying to
 629  * keep an up-to-date record, we recompute the budget when it is needed.
 630  */
 631
 632 struct ehci_tt {
 633         u16                     bandwidth[EHCI_BANDWIDTH_FRAMES];
 634
 635         struct list_head        tt_list;        /* List of all ehci_tt's */
 636         struct list_head        ps_list;        /* Items using this TT */
 637         struct usb_tt           *usb_tt;
 638         int                     tt_port;        /* TT port number */
 639 };
 640
 641 /*-------------------------------------------------------------------------*/
 642
 643 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
 644
 645 #define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup)      \
 646                 ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup);
 647
 648 #define ehci_prepare_ports_for_controller_resume(ehci)                  \
 649                 ehci_adjust_port_wakeup_flags(ehci, false, false);
 650
 651 /*-------------------------------------------------------------------------*/
 652
 653 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
 654
 655 /*
 656  * Some EHCI controllers have a Transaction Translator built into the
 657  * root hub. This is a non-standard feature.  Each controller will need
 658  * to add code to the following inline functions, and call them as
 659  * needed (mostly in root hub code).
 660  */
 661
 662 #define ehci_is_TDI(e)                  (ehci_to_hcd(e)->has_tt)
 663
 664 /* Returns the speed of a device attached to a port on the root hub. */
 665 static inline unsigned int
 666 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
 667 {
 668         if (ehci_is_TDI(ehci)) {
 669                 switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
 670                 case 0:
 671                         return 0;
 672                 case 1:
 673                         return USB_PORT_STAT_LOW_SPEED;
 674                 case 2:
 675                 default:
 676                         return USB_PORT_STAT_HIGH_SPEED;
 677                 }
 678         }
 679         return USB_PORT_STAT_HIGH_SPEED;
 680 }
 681
 682 #else
 683
 684 #define ehci_is_TDI(e)                  (0)
 685
 686 #define ehci_port_speed(ehci, portsc)   USB_PORT_STAT_HIGH_SPEED
 687 #endif
 688
 689 /*-------------------------------------------------------------------------*/
 690
 691 #ifdef CONFIG_PPC_83xx
 692 /* Some Freescale processors have an erratum in which the TT
 693  * port number in the queue head was 0..N-1 instead of 1..N.
 694  */
 695 #define ehci_has_fsl_portno_bug(e)              ((e)->has_fsl_port_bug)
 696 #else
 697 #define ehci_has_fsl_portno_bug(e)              (0)
 698 #endif
 699
 700 #define PORTSC_FSL_PFSC 24      /* Port Force Full-Speed Connect */
 701
 702 #if defined(CONFIG_PPC_85xx)
 703 /* Some Freescale processors have an erratum (USB A-005275) in which
 704  * incoming packets get corrupted in HS mode
 705  */
 706 #define ehci_has_fsl_hs_errata(e)       ((e)->has_fsl_hs_errata)
 707 #else
 708 #define ehci_has_fsl_hs_errata(e)       (0)
 709 #endif
 710
 711 /*
 712  * While most USB host controllers implement their registers in
 713  * little-endian format, a minority (celleb companion chip) implement
 714  * them in big endian format.
 715  *
 716  * This attempts to support either format at compile time without a
 717  * runtime penalty, or both formats with the additional overhead
 718  * of checking a flag bit.
 719  *
 720  * ehci_big_endian_capbase is a special quirk for controllers that
 721  * implement the HC capability registers as separate registers and not
 722  * as fields of a 32-bit register.
 723  */
 724
 725 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
 726 #define ehci_big_endian_mmio(e)         ((e)->big_endian_mmio)
 727 #define ehci_big_endian_capbase(e)      ((e)->big_endian_capbase)
 728 #else
 729 #define ehci_big_endian_mmio(e)         0
 730 #define ehci_big_endian_capbase(e)      0
 731 #endif
 732
 733 /*
 734  * Big-endian read/write functions are arch-specific.
 735  * Other arches can be added if/when they're needed.
 736  */
 737 #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
 738 #define readl_be(addr)          __raw_readl((__force unsigned *)addr)
 739 #define writel_be(val, addr)    __raw_writel(val, (__force unsigned *)addr)
 740 #endif
 741
 742 static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
 743                 __u32 __iomem * regs)
 744 {
 745 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
 746         return ehci_big_endian_mmio(ehci) ?
 747                 readl_be(regs) :
 748                 readl(regs);
 749 #else
 750         return readl(regs);
 751 #endif
 752 }
 753
 754 #ifdef CONFIG_SOC_IMX28
 755 static inline void imx28_ehci_writel(const unsigned int val,
 756                 volatile __u32 __iomem *addr)
 757 {
 758         __asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
 759 }
 760 #else
 761 static inline void imx28_ehci_writel(const unsigned int val,
 762                 volatile __u32 __iomem *addr)
 763 {
 764 }
 765 #endif
 766 static inline void ehci_writel(const struct ehci_hcd *ehci,
 767                 const unsigned int val, __u32 __iomem *regs)
 768 {
 769 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
 770         ehci_big_endian_mmio(ehci) ?
 771                 writel_be(val, regs) :
 772                 writel(val, regs);
 773 #else
 774         if (ehci->imx28_write_fix)
 775                 imx28_ehci_writel(val, regs);
 776         else
 777                 writel(val, regs);
 778 #endif
 779 }
 780
 781 /*
 782  * On certain ppc-44x SoC there is a HW issue, that could only worked around with
 783  * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
 784  * Other common bits are dependent on has_amcc_usb23 quirk flag.
 785  */
 786 #ifdef CONFIG_44x
 787 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
 788 {
 789         u32 hc_control;
 790
 791         hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
 792         if (operational)
 793                 hc_control |= OHCI_USB_OPER;
 794         else
 795                 hc_control |= OHCI_USB_SUSPEND;
 796
 797         writel_be(hc_control, ehci->ohci_hcctrl_reg);
 798         (void) readl_be(ehci->ohci_hcctrl_reg);
 799 }
 800 #else
 801 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
 802 { }
 803 #endif
 804
 805 /*-------------------------------------------------------------------------*/
 806
 807 /*
 808  * The AMCC 440EPx not only implements its EHCI registers in big-endian
 809  * format, but also its DMA data structures (descriptors).
 810  *
 811  * EHCI controllers accessed through PCI work normally (little-endian
 812  * everywhere), so we won't bother supporting a BE-only mode for now.
 813  */
 814 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
 815 #define ehci_big_endian_desc(e)         ((e)->big_endian_desc)
 816
 817 /* cpu to ehci */
 818 static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
 819 {
 820         return ehci_big_endian_desc(ehci)
 821                 ? (__force __hc32)cpu_to_be32(x)
 822                 : (__force __hc32)cpu_to_le32(x);
 823 }
 824
 825 /* ehci to cpu */
 826 static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
 827 {
 828         return ehci_big_endian_desc(ehci)
 829                 ? be32_to_cpu((__force __be32)x)
 830                 : le32_to_cpu((__force __le32)x);
 831 }
 832
 833 static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
 834 {
 835         return ehci_big_endian_desc(ehci)
 836                 ? be32_to_cpup((__force __be32 *)x)
 837                 : le32_to_cpup((__force __le32 *)x);
 838 }
 839
 840 #else
 841
 842 /* cpu to ehci */
 843 static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
 844 {
 845         return cpu_to_le32(x);
 846 }
 847
 848 /* ehci to cpu */
 849 static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
 850 {
 851         return le32_to_cpu(x);
 852 }
 853
 854 static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
 855 {
 856         return le32_to_cpup(x);
 857 }
 858
 859 #endif
 860
 861 /*-------------------------------------------------------------------------*/
 862
 863 #define ehci_dbg(ehci, fmt, args...) \
 864         dev_dbg(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
 865 #define ehci_err(ehci, fmt, args...) \
 866         dev_err(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
 867 #define ehci_info(ehci, fmt, args...) \
 868         dev_info(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
 869 #define ehci_warn(ehci, fmt, args...) \
 870         dev_warn(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
 871
 872
 873 #ifndef CONFIG_DYNAMIC_DEBUG
 874 #define STUB_DEBUG_FILES
 875 #endif
 876
 877 /*-------------------------------------------------------------------------*/
 878
 879 /* Declarations of things exported for use by ehci platform drivers */
 880
 881 struct ehci_driver_overrides {
 882         size_t          extra_priv_size;
 883         int             (*reset)(struct usb_hcd *hcd);
 884         int             (*port_power)(struct usb_hcd *hcd,
 885                                 int portnum, bool enable);
 886 };
 887
 888 extern void     ehci_init_driver(struct hc_driver *drv,
 889                                 const struct ehci_driver_overrides *over);
 890 extern int      ehci_setup(struct usb_hcd *hcd);
 891 extern int      ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
 892                                 u32 mask, u32 done, int usec);
 893 extern int      ehci_reset(struct ehci_hcd *ehci);
 894
 895 #ifdef CONFIG_PM
 896 extern int      ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
 897 extern int      ehci_resume(struct usb_hcd *hcd, bool force_reset);
 898 extern void     ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 899                         bool suspending, bool do_wakeup);
 900 #endif  /* CONFIG_PM */
 901
 902 extern int      ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 903                                  u16 wIndex, char *buf, u16 wLength);
 904
 905 #endif /* __LINUX_EHCI_HCD_H */