gas/testsuite/gas/elf/elf.exp

   1 # Copyright 2012-2013 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 3 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program; if not, write to the Free Software
  15 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  16
  17 #
  18 # elf tests
  19 #
  20
  21 proc run_elf_list_test { name suffix opts readelf_opts readelf_pipe } {
  22     global READELF
  23     global srcdir subdir
  24     set testname "elf $name list"
  25     set file $srcdir/$subdir/$name
  26     gas_run ${name}.s "$opts -o dump.o" ">&dump.out"
  27     if { ![string match "" $opts]
  28           && [regexp_diff "dump.out" "${file}.l"] } then {
  29         fail $testname
  30         verbose "output is [file_contents "dump.out"]" 2
  31         return
  32     }
  33     send_log "$READELF $readelf_opts dump.o $readelf_pipe > dump.out\n"
  34     set status [gas_host_run "$READELF $readelf_opts dump.o" ">readelf.out"]
  35     if { [lindex $status 0] != 0 || ![string match "" [lindex $status 1]] } then {
  36         send_log "[lindex $status 1]\n"
  37         fail $testname
  38         return
  39     }
  40     catch "exec cat readelf.out $readelf_pipe > dump.out\n" comp_output
  41     if ![string match "" $comp_output] then {
  42         send_log "$comp_output\n"
  43         fail $testname
  44         return
  45     }
  46     verbose_eval {[file_contents "dump.out"]} 3
  47     if { [regexp_diff "dump.out" "${file}.e${suffix}"] } then {
  48         fail $testname
  49         verbose "output is [file_contents "dump.out"]" 2
  50         return
  51     }
  52     pass $testname
  53 }
  54
  55 # We're testing bits in obj-elf -- don't run on anything else.
  56 if { [is_elf_format] } then {
  57     set target_machine ""
  58     if {[istarget "mips*-*-*"]} then {
  59         set target_machine -mips
  60     }
  61     if {[istarget m32r*-*-*]} then {
  62         set target_machine -m32r
  63     }
  64     if {[istarget "msp430-*-*"]} then {
  65         set target_machine -msp430
  66     }
  67     if {[istarget "score-*-*"]} then {
  68         set target_machine -score
  69     }
  70     if {[istarget "tic6x-*-*"]} then {
  71         set target_machine -tic6x
  72     }
  73     if {[istarget "xtensa*-*-*"]} then {
  74         set target_machine -xtensa
  75     }
  76     if {[istarget "rx-*-*"]} then {
  77         set target_machine -rx
  78     }
  79     if {[istarget "arm*-*-*"]} {
  80
  81         if { ([istarget "*-*-*eabi"]
  82               || [istarget "*-*-linux-*"]
  83               || [istarget "*-*-nacl*"]
  84               || [istarget "*-*-symbianelf"])} then {
  85             set target_machine -armeabi
  86         } else {
  87             set target_machine -armelf
  88         }
  89     }
  90
  91     # The MN10300 and Xtensa ports disable the assembler's call frame
  92     # optimization because it interfers with link-time relaxation of
  93     # function prologues.
  94     if {![istarget "mn10300-*-*"]
  95         && ![istarget "xtensa*-*-*"]
  96         && ![istarget "msp430*-*-*"]
  97         && ![istarget "nds32*-*-*"]
  98         && ![istarget "am3*-*-*"]} then {
  99       run_dump_test "ehopt0"
 100     }
 101     case $target_triplet in {
 102         { m68k-*-* m68[03]??-*-* } {
 103             run_dump_test "file" { { as "--defsym m68k=1" } }
 104         }
 105         { mmix-*-* } {
 106             run_dump_test "file" { { as "--defsym mmix=1" } }
 107         }
 108         { xtensa*-*-* } {
 109             run_dump_test "file" { { as "--rename-section file.s=file.c" } }
 110         }
 111         default {
 112             run_dump_test "file"
 113         }
 114     }
 115     setup_xfail "nds32*-*-*"
 116     run_dump_test "group0a"
 117     run_dump_test "group0b"
 118     run_dump_test "group0c"
 119     run_dump_test "group1a"
 120     run_dump_test "group1b"
 121     case $target_triplet in {
 122         { hppa64*-*-hpux* } { }
 123         default {
 124             run_dump_test "groupautoa"
 125         }
 126     }
 127     case $target_triplet in {
 128         { hppa64*-*-hpux* } { }
 129         { xtensa*-*-* } { }
 130         default {
 131             run_dump_test "groupautob"
 132         }
 133     }
 134     case $target_triplet in {
 135         { alpha*-*-* } { }
 136         { cr16*-*-* } { }
 137         { crx*-*-* } { }
 138         { h8300-*-* } { }
 139         { hppa*-*-* } { }
 140         { iq2000*-*-* } { }
 141         { mips*-*-* } { }
 142         { mn10200-*-* } { }
 143         { mn10300-*-* } { }
 144         { msp43*-*-* } { }
 145         { *c54x*-*-* } { }
 146         { rx-*-* } { }
 147         default {
 148             # The next test can fail if the target does not convert fixups
 149             # against ordinary symbols into relocations against section symbols.
 150             # This is usually revealed by the error message:
 151             #  symbol `sym' required but not present
 152         setup_xfail "m681*-*-*" "m68hc*-*-*"
 153             run_dump_test redef
 154             run_dump_test equ-reloc
 155         }
 156     }
 157     run_dump_test "pseudo"
 158     run_dump_test "section0"
 159     run_dump_test "section1"
 160     if {! [istarget "h8300-*-*"]} then {
 161         # The h8300 port issues a warning message for
 162         # new sections created without atrributes.
 163         run_elf_list_test "section2" "$target_machine" "-al" "-s" ""
 164     }
 165     run_dump_test "section3"
 166     run_dump_test "section4"
 167     if {! [istarget "h8300-*-*"] && ! [istarget "rx-*-*"]} then {
 168         # The h8300 port issues a warning message for
 169         # new sections created without atrributes.
 170         # The RX port does not complain about changing the attributes of the
 171         # .data and .bss sections since it does not use those names.
 172         run_elf_list_test "section5" "" "-al" "-SW" "| grep \" \\\\.test\\\[0-9\\\]\""
 173     }
 174     run_dump_test "struct"
 175     if { ![istarget "alpha*-*-*"] } then {
 176         # The alpha port uses .set for state, e.g. nomacro.
 177         run_dump_test "symtab"
 178     }
 179     run_dump_test "symver"
 180
 181     # No indirect functions on non-GNU targets.
 182     # The MSP port sets the ELF header's OSABI field to ELFOSABI_STANDALONE.
 183     # The non-eabi ARM ports sets it to ELFOSABI_ARM.
 184     # So for these targets we cannot include an IFUNC symbol type
 185     # in the symbol type test.
 186     if { [istarget "*-*-hpux*"]
 187          || [istarget "msp*-*-*"]
 188          || [istarget "arm*-*-*"]} then {
 189         # hppa64 has a non-standard common directive
 190         if { ![istarget "hppa64*-*-hpux*"] } then {
 191             run_elf_list_test "type-noifunc" "" "" "-s" "| grep \"1 *\\\[FONTC\\\]\""
 192         }
 193     } else {
 194         run_dump_test ifunc-1
 195         run_elf_list_test "type" "" "" "-s" "| grep \"1 *\\\[FIONTCU\\\]\""
 196     }
 197
 198     run_dump_test "section6"
 199     run_dump_test "section7"
 200     run_dump_test "section8"
 201     run_dump_test "section9"
 202     run_dump_test "dwarf2-1"
 203     run_dump_test "dwarf2-2"
 204     run_dump_test "dwarf2-3"
 205     run_dump_test "dwarf2-4"
 206     run_dump_test "bad-section-flag"
 207     run_dump_test "bad-size"
 208     run_dump_test "bad-group"
 209
 210     run_dump_test "syms"
 211
 212     run_dump_test "common1"
 213     run_dump_test "common2"
 214
 215 load_lib gas-dg.exp
 216 dg-init
 217 dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/err-*.s $srcdir/$subdir/warn-*.s]] "" ""
 218 dg-finish
 219
 220 }