gas/testsuite/gas/mips/mips.exp

   1 # Copyright (C) 2012-2014 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 3 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program; if not, write to the Free Software
  15 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  16
  17 #
  18 # Some generic MIPS tests
  19 #
  20
  21 # When adding a new test to this file, try to do the following things:
  22 #
  23 # * If testing assembly and disassembly of code, don't forget to test
  24 # the actual bit encodings of the instructions (using the
  25 # --show-raw-insn flag to objdump).
  26 #
  27 # * Try to run the test for as many architectures as appropriate,
  28 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  29 # along with the output from a call to "mips_arch_list_matching."
  30 #
  31 # * Be sure to compare the test output before and after your testsuite
  32 # changes, to verify that existing and new tests were run as expected.
  33 # Look for expect ERROR messages in the testsuite .log file to make sure
  34 # the new expect code did not contain errors.
  35
  36 # To add support for a new CPU to this file, add an appropriate entry
  37 # to the sequence of "mips_arch_create" function calls below, and test
  38 # the result.  The new CPU should automatically be used when running
  39 # various tests.  If the new CPU is the default CPU for any tool
  40 # targets, make sure the call to "mips_arch_create" reflects that fact.
  41
  42
  43 # The functions below create and manipulate an "architecture data
  44 # array" which contains entries for each MIPS architecture (or CPU)
  45 # known to these tests.  The array contains the following information
  46 # for each architecture, indexed by the name of the architecture
  47 # described by the entry:
  48 #
  49 # displayname: The name of the entry to be used for pretty-printing.
  50 #
  51 # gprsize: The size in bits of General Purpose Registers provided by
  52 # the architecture (must be 32 or 64).
  53 #
  54 # props: A list of text strings which are associated with the
  55 # architecture.  These include the architecture name as well as
  56 # information about what instructions the CPU supports.  When matching
  57 # based on properties, an additional property is added to the normal
  58 # property list, "gpr<gprsize>" so that tests can match CPUs which
  59 # have GPRs of a specific size.  The following properties are most
  60 # useful when matching properties for generic (i.e., not CPU-specific)
  61 # tests:
  62 #
  63 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  64 #               The architecture includes the instructions defined
  65 #               by that MIPS ISA.
  66 #
  67 #       fpisa3, fpisa4, fpisa5
  68 #               The architecture includes the floating-point
  69 #               instructions defined by that MIPS ISA.
  70 #
  71 #       gpr_ilocks
  72 #               The architecture interlocks GPRs accesses.  (That is,
  73 #               there are no load delay slots.)
  74 #
  75 #       mips3d  The architecture includes the MIPS-3D ASE.
  76 #
  77 #       ror     The architecture includes hardware rotate instructions.
  78 #
  79 #       gpr32, gpr64
  80 #               The architecture provides 32- or 64-bit General Purpose
  81 #               Registers.
  82 #
  83 #       singlefloat
  84 #               The CPU is 64 bit, but only supports 32 bit FPU.
  85 #
  86 #       nollsc
  87 #               The CPU doesn't support ll, sc, lld and scd instructions.
  88 #
  89 # as_flags: The assembler flags used when assembling tests for this
  90 # architecture.
  91 #
  92 # objdump_flags: The objdump flags used when disassembling tests for
  93 # this architecture.
  94 #
  95 # Most entries in the architecture array will have values in all of
  96 # the fields above.  One entry, "default" represents the default CPU
  97 # based on the target of the assembler being built.  If always has
  98 # empty "as_flags" and "objdump_flags."
  99
 100 # mips_arch_init
 101 #
 102 # This function initializes the architecture data array ("mips_arches")
 103 # to be empty.
 104 proc mips_arch_init {} {
 105     global mips_arches
 106
 107     # Catch because the variable won't be set the first time through.
 108     catch {unset mips_arches}
 109 }
 110
 111 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
 112 #                  (optional:) DEFAULT_FOR_TARGETS
 113 #
 114 # This function creates a new entry in the architecture data array,
 115 # for the architecture or CPU named ARCH, and fills in the entry
 116 # according to the rest of the arguments.
 117 #
 118 # The new entry's property list is initialized to contain ARCH, any
 119 # properties specified by PROPS, and the properties associated with
 120 # the entry specified by EXTENDS.  (The new architecture is considered
 121 # to extend the capabilities provided by that architecture.)
 122 #
 123 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 124 # this architecture is the default architecture.  If "istarget" returns
 125 # true for any of the targets in the list, a "default" entry will be
 126 # added to the architecture array which indicates that ARCH is the default
 127 # architecture.
 128 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 129                        {default_for_targets {}}} {
 130     global mips_arches
 131
 132     if { [info exists mips_arches($arch)] } {
 133              error "mips_arch_create: arch \"$arch\" already exists"
 134     }
 135     if { $gprsize != 32 && $gprsize != 64 } {
 136         error "mips_arch_create: invalid GPR size $gprsize"
 137     }
 138
 139     set archdata(displayname) $arch
 140     set archdata(gprsize) $gprsize
 141     set archdata(as_flags) $as_flags
 142     set archdata(objdump_flags) $objdump_flags
 143     set archdata(props) $arch
 144     eval lappend archdata(props) $props
 145     if { [string length $extends] != 0 } {
 146         eval lappend archdata(props) [mips_arch_properties $extends 0]
 147     }
 148
 149     set mips_arches($arch) [array get archdata]
 150
 151     # Set as default if appropriate.
 152     foreach target $default_for_targets {
 153         if { [istarget $target] } {
 154             if { [info exists mips_arches(default)] } {
 155                 error "mips_arch_create: default arch already exists"
 156             }
 157
 158             set archdata(displayname) "default = $arch"
 159             set archdata(as_flags) ""
 160             set archdata(objdump_flags) ""
 161
 162             set mips_arches(default) [array get archdata]
 163             break
 164         }
 165     }
 166 }
 167
 168 # mips_arch_destroy ARCH
 169 #
 170 # The opposite of the above.  This function removes an entry from
 171 # the architecture data array, for the architecture or CPU named ARCH.
 172
 173 proc mips_arch_destroy {arch} {
 174     global mips_arches
 175
 176     if { [info exists mips_arches($arch)] } {
 177         unset mips_arches($arch)
 178     }
 179 }
 180
 181 # mips_arch_list_all
 182 #
 183 # This function returns the list of all names of entries in the
 184 # architecture data array (including the default entry, if a default
 185 # is known).
 186 proc mips_arch_list_all {} {
 187     global mips_arches
 188     return [lsort -dictionary [array names mips_arches]]
 189 }
 190
 191 # mips_arch_data ARCH
 192 #
 193 # This function returns the information associated with ARCH
 194 # in the architecture data array, in "array get" form.
 195 proc mips_arch_data {arch} {
 196     global mips_arches
 197
 198     if { ! [info exists mips_arches($arch)] } {
 199         error "mips_arch_data: unknown arch \"$arch\""
 200     }
 201     return $mips_arches($arch)
 202 }
 203
 204 # mips_arch_displayname ARCH
 205 #
 206 # This function returns the printable name associated with ARCH in
 207 # the architecture data array.
 208 proc mips_arch_displayname {arch} {
 209     array set archdata [mips_arch_data $arch]
 210     return $archdata(displayname)
 211 }
 212
 213 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 214 #
 215 # This function returns the property list associated with ARCH in the
 216 # architecture data array, including the "canonical" target name as the
 217 # first element.
 218 #
 219 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 220 # property will be returned as part of the list based on the
 221 # architecture's GPR size.
 222 proc mips_arch_properties {arch {include_gprsize 1}} {
 223     array set archdata [mips_arch_data $arch]
 224     set props $archdata(props)
 225     if { $include_gprsize } {
 226         lappend props gpr$archdata(gprsize)
 227     }
 228     return $props
 229 }
 230
 231 # mips_arch_as_flags ARCH
 232 #
 233 # This function returns the assembler flags associated with ARCH in
 234 # the architecture data array.
 235 proc mips_arch_as_flags {arch} {
 236     array set archdata [mips_arch_data $arch]
 237     return $archdata(as_flags)
 238 }
 239
 240 # mips_arch_objdump_flags ARCH
 241 #
 242 # This function returns the objdump disassembly flags associated with
 243 # ARCH in the architecture data array.
 244 proc mips_arch_objdump_flags {arch} {
 245     array set archdata [mips_arch_data $arch]
 246     return $archdata(objdump_flags)
 247 }
 248
 249 # mips_arch_matches ARCH PROPMATCHLIST
 250 #
 251 # This function returns non-zero if ARCH matches the set of properties
 252 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 253 # be the name of a property which must be matched, or "!" followed by
 254 # the name of a property which must not be matched.  ARCH matches
 255 # PROPMATCHLIST if and only if all of the conditions specified by
 256 # PROPMATCHLIST are satisfied.
 257 proc mips_arch_matches {arch propmatchlist} {
 258     foreach pm $propmatchlist {
 259         if { [string match {!*} $pm] } {
 260             # fail if present.
 261             set inverted 1
 262             set p [string range $pm 1 end]
 263         } {
 264             # fail if not present.
 265             set inverted 0
 266             set p $pm
 267         }
 268
 269         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 270
 271         # required-absent and found, or required-present and not found: fail.
 272         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 273             return 0
 274         }
 275     }
 276     return 1
 277 }
 278
 279 # mips_arch_list_matching ARGS
 280 #
 281 # This function returns a list of all architectures which match
 282 # the conditions described by its arguments.  Its arguments are
 283 # taken as a list and used as the PROPMATCHLIST in a call to
 284 # "mips_arch_matches" for each known architecture.
 285 proc mips_arch_list_matching {args} {
 286     set l ""
 287     foreach arch [mips_arch_list_all] {
 288         # For now, don't match default arch until we know what its
 289         # properties actually are.
 290         if { [string compare $arch default] == 0
 291              && [string length [mips_arch_properties default]] == 0} {
 292             continue
 293         }
 294         if { [mips_arch_matches $arch $args] } {
 295             lappend l $arch
 296         }
 297     }
 298     return $l
 299 }
 300
 301
 302 # The functions below facilitate running various types of tests.
 303
 304 # run_dump_test_arch NAME OPTS ARCH
 305 #
 306 # Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
 307 # Add the assembler and disassembler flags that are associated with
 308 # architecture ARCH.
 309 #
 310 # You can override the expected output for particular architectures.
 311 # The possible test names are, in order of preference:
 312 #
 313 # 1. CARCH@NAME.d
 314 # 2. NAME.d
 315 #
 316 # where CARCH is the "canonical" name of architecture ARCH as recorded
 317 # in its associated property list.
 318 proc run_dump_test_arch { name opts arch } {
 319     global subdir srcdir
 320
 321     set proparch [lindex [mips_arch_properties $arch 0] 0]
 322     set prefixes [list ${proparch}@ ]
 323     if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
 324         lappend prefixes octeon@
 325     }
 326     foreach prefix ${prefixes} {
 327         set archname ${prefix}${name}
 328         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 329             set name $archname
 330             break
 331         }
 332     }
 333
 334     if [catch {run_dump_test $name \
 335                    "{name    {([concat $opts [mips_arch_displayname $arch]])}}
 336                     {objdump {[mips_arch_objdump_flags $arch]}}
 337                     {as      {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
 338         perror "$rv"
 339         untested "$subdir/$name ($arch)"
 340     }
 341 }
 342
 343 # run_dump_test_arches NAME [OPTS] ARCH_LIST
 344 #
 345 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 346 # listed in ARCH_LIST.  OPTS, if specified, is a list of additional
 347 # assembler options that should be used for all architectures.
 348 proc run_dump_test_arches { name args } {
 349     set opts ""
 350     if { [llength $args] > 1 } {
 351         set opts [lindex $args 0]
 352         set args [lrange $args 1 end]
 353     }
 354     set arch_list [lindex $args 0]
 355     foreach arch $arch_list {
 356         run_dump_test_arch $name $opts $arch
 357     }
 358 }
 359
 360 # run_list_test_arch NAME OPTS ARCH
 361 #
 362 # Invoke "run_list_test" for test NAME with additional assembler options OPTS.
 363 # Add the assembler flags that are associated with architecture ARCH.
 364 proc run_list_test_arch { name opts arch } {
 365     global subdir
 366
 367     set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
 368     if [catch {run_list_test \
 369                    $name \
 370                    [concat $opts [mips_arch_as_flags $arch]] \
 371                    $testname} rv] {
 372         perror "$rv"
 373         untested "$testname"
 374     }
 375 }
 376
 377 # run_list_test_arches NAME [OPTS] ARCH_LIST
 378 #
 379 # Invoke "run_list_test_arch" for test NAME, for each architecture listed
 380 # in ARCH_LIST.  OPTS, if specified, is a list of additional assembler
 381 # options that should be used for all architectures.
 382 proc run_list_test_arches { name args } {
 383     set opts ""
 384     if { [llength $args] > 1 } {
 385         set opts [lindex $args 0]
 386         set args [lrange $args 1 end]
 387     }
 388     set arch_list [lindex $args 0]
 389     foreach arch $arch_list {
 390         run_list_test_arch "$name" "$opts" "$arch"
 391     }
 392 }
 393
 394
 395 # Create the architecture data array by providing data for all
 396 # known architectures.
 397 #
 398 # Note that several targets pick default CPU based on ABI.  We
 399 # can't easily handle that; do NOT list those targets as defaulting
 400 # to any architecture.
 401 mips_arch_init
 402 mips_arch_create mips1  32      {}      {} \
 403                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 404 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 405                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 406 mips_arch_create mips3  64      mips2   { fpisa3 } \
 407                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 408 mips_arch_create mips4  64      mips3   { fpisa4 } \
 409                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 410 mips_arch_create mips5  64      mips4   { fpisa5 } \
 411                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 412 mips_arch_create mips32 32      mips2   {} \
 413                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 414                         { mipsisa32-*-* mipsisa32el-*-* }
 415 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 416                         { -march=mips32r2 -mtune=mips32r2 } \
 417                         { -mmips:isa32r2 } \
 418                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 419 mips_arch_create mips32r3 32    mips32r2 { fpisa3 fpisa4 fpisa5 ror } \
 420                         { -march=mips32r3 -mtune=mips32r3 } \
 421                         { -mmips:isa32r3 } \
 422                         { mipsisa32r3-*-* mipsisa32r3el-*-* }
 423 mips_arch_create mips32r5 32    mips32r3 { fpisa3 fpisa4 fpisa5 ror } \
 424                         { -march=mips32r5 -mtune=mips32r5 } \
 425                         { -mmips:isa32r5 } \
 426                         { mipsisa32r5-*-* mipsisa32r5el-*-* }
 427 mips_arch_create mips64 64      mips5   { mips32 } \
 428                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 429                         { mipsisa64-*-* mipsisa64el-*-* }
 430 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 431                         { -march=mips64r2 -mtune=mips64r2 } \
 432                         { -mmips:isa64r2 } \
 433                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 434 mips_arch_create mips64r3 64    mips64r2 { mips32r3 ror } \
 435                         { -march=mips64r3 -mtune=mips64r3 } \
 436                         { -mmips:isa64r3 } \
 437                         { mipsisa64r3-*-* mipsisa64r3el-*-* }
 438 mips_arch_create mips64r5 64    mips64r3 { mips32r5 ror } \
 439                         { -march=mips64r5 -mtune=mips64r5 } \
 440                         { -mmips:isa64r5 } \
 441                         { mipsisa64r5-*-* mipsisa64r5el-*-* }
 442 mips_arch_create mips16 32      {}      {} \
 443                         { -march=mips1 -mips16 } { -mmips:16 }
 444 mips_arch_create micromips 64   mips64r2 {} \
 445                         { -march=mips64r2 -mmicromips } {}
 446 mips_arch_create r3000  32      mips1   {} \
 447                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 448 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 449                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 450                         { mipstx39-*-* mipstx39el-*-* }
 451 mips_arch_create r4000  64      mips3   {} \
 452                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 453 mips_arch_create vr5400 64      mips4   { ror } \
 454                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 455 mips_arch_create sb1    64      mips64  { mips3d } \
 456                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 457                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 458 mips_arch_create octeon 64      mips64r2 {} \
 459                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 460                         { mips64octeon*-*-* }
 461 mips_arch_create octeonp 64     octeon {} \
 462                         { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
 463                         { }
 464 mips_arch_create octeon2 64     octeonp {} \
 465                         { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
 466                         { }
 467 mips_arch_create xlr    64      mips64  {} \
 468                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 469 mips_arch_create r5900  64      mips3   { gpr_ilocks singlefloat nollsc } \
 470                         { -march=r5900 -mtune=r5900 } { -mmips:5900 } \
 471                         { mipsr5900el-*-* mips64r5900el-*-* }
 472
 473 #
 474 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 475 # relocations, so most of the generic dump tests will not work there.
 476 #
 477 if { [istarget mips*-*-vxworks*] } {
 478     run_dump_test "vxworks1"
 479     run_dump_test "vxworks1-xgot"
 480     run_dump_test "vxworks1-el"
 481     run_dump_test "vxworks1-xgot-el"
 482 } elseif { [istarget mips*-*-*] } {
 483     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*]]
 484     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] \
 485                          || [istarget mips*-sde-elf*] || [istarget mips*-mti-elf*]]
 486
 487     if { [istarget "mips*-*-*linux*"]
 488          || [istarget "mips*-sde-elf*"]
 489          || [istarget "mips*-mti-elf*"]
 490          || [istarget "mips*-*-*bsd*"] } then {
 491         set tmips "t"
 492     } else {
 493         set tmips ""
 494     }
 495     if [istarget mips*el-*-*] {
 496         set el "el"
 497     } {
 498         set el ""
 499     }
 500
 501     run_dump_test_arches "dot-1"        [mips_arch_list_matching mips1]
 502     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 503     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 504     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 505     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 506     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 507                                         [mips_arch_list_matching mips1]
 508     run_dump_test "break20"
 509     run_dump_test "trap20"
 510
 511     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 512     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 513     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 514     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 515     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 516     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 517     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 518     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 519     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 520     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 521     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 522     run_dump_test "branch-misc-3"
 523     run_dump_test "branch-swap"
 524
 525     # Sweep a range of branch offsets so that it hits a position where
 526     # it is at the beginning of a frag and then swapped with a 16-bit
 527     # instruction from the preceding frag.  The offset will be somewhere
 528     # close below 4096 as this is the default obstack size limit that
 529     # we use and some space will have been already consumed.  The exact
 530     # amount depends on the host's programming model.
 531     for { set count 960 } { $count <= 1024 } { incr count } {
 532         run_list_test "branch-swap-2" "--defsym count=$count" \
 533             "MIPS branch swapping ($count)"
 534     }
 535
 536     run_dump_test "div"
 537
 538     if { !$addr32 } {
 539         run_dump_test_arches "dli"      [mips_arch_list_matching mips3]
 540     }
 541     run_dump_test_arches "jal"          [mips_arch_list_matching mips1]
 542     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 543     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 544     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 545     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 546     run_dump_test "eret-1"
 547     run_dump_test "eret-2"
 548     run_dump_test "eret-3"
 549     run_dump_test_arches "fix-rm7000-1" \
 550                                         [mips_arch_list_matching mips3 !singlefloat]
 551     run_dump_test_arches "fix-rm7000-2" \
 552                                         [mips_arch_list_matching mips3 !singlefloat]
 553     run_dump_test_arches "24k-branch-delay-1" \
 554                                         [mips_arch_list_matching mips1]
 555     run_dump_test_arches "24k-triple-stores-1" \
 556                                 [mips_arch_list_matching fpisa5 !octeon]
 557     run_dump_test_arches "24k-triple-stores-2" \
 558                                         [mips_arch_list_matching mips2]
 559     run_dump_test_arches "24k-triple-stores-2-llsc" \
 560                                         [mips_arch_list_matching mips2 !nollsc]
 561     run_dump_test_arches "24k-triple-stores-3" \
 562                                         [mips_arch_list_matching mips2]
 563     run_dump_test_arches "24k-triple-stores-4" \
 564                                         [mips_arch_list_matching mips2 !singlefloat]
 565     run_dump_test_arches "24k-triple-stores-5" \
 566                                         [mips_arch_list_matching mips1]
 567     run_dump_test_arches "24k-triple-stores-6" \
 568                                         [mips_arch_list_matching mips2 !singlefloat]
 569     run_dump_test_arches "24k-triple-stores-7" \
 570                                         [mips_arch_list_matching mips2 !singlefloat]
 571     run_dump_test_arches "24k-triple-stores-8" \
 572                                         [mips_arch_list_matching mips1]
 573     run_dump_test_arches "24k-triple-stores-9" \
 574                                         [mips_arch_list_matching mips1]
 575     run_dump_test_arches "24k-triple-stores-10" \
 576                                         [mips_arch_list_matching mips1]
 577     run_dump_test_arches "24k-triple-stores-11" \
 578                                         [mips_arch_list_matching mips1]
 579
 580     run_dump_test_arches "jal-svr4pic"  [mips_arch_list_matching mips1]
 581     run_dump_test_arches "jal-svr4pic-noreorder" \
 582                                         [mips_arch_list_matching mips1]
 583     run_dump_test "jal-xgot"
 584     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 585     if $has_newabi { run_dump_test "jal-newabi" }
 586     run_dump_test "la"
 587     run_dump_test "la-svr4pic"
 588     run_dump_test "la-xgot"
 589     run_dump_test "lca-svr4pic"
 590     run_dump_test "lca-xgot"
 591     # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 592     # (Should split and then use appropriate arch lists.)
 593     run_dump_test_arches "lb"   [mips_arch_list_matching mips1 !mips2]
 594     run_dump_test_arches "lb-svr4pic" \
 595                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 596     run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 597     # Both versions specify the cpu, so we can run both regardless of
 598     # the interlocking in the configured default cpu.
 599     run_dump_test "lb-xgot"
 600     run_dump_test "lb-xgot-ilocks"
 601     run_dump_test_arches "ld"           [mips_arch_list_matching mips1]
 602     run_dump_test_arches "ld-forward"   [mips_arch_list_matching mips1]
 603     run_dump_test_arches "sd"           [mips_arch_list_matching mips1]
 604     run_dump_test_arches "sd-forward"   [mips_arch_list_matching mips1]
 605     run_dump_test_arches "l_d"          [mips_arch_list_matching mips1 !singlefloat]
 606     run_dump_test_arches "l_d-single"   [mips_arch_list_matching mips1 singlefloat]
 607     run_dump_test_arches "l_d-forward"  [mips_arch_list_matching mips1 !singlefloat]
 608     run_dump_test_arches "s_d"          [mips_arch_list_matching mips1 !singlefloat]
 609     run_dump_test_arches "s_d-single"   [mips_arch_list_matching mips1 singlefloat]
 610     run_dump_test_arches "s_d-forward"  [mips_arch_list_matching mips1 !singlefloat]
 611     run_dump_test_arches "ldc1"         [mips_arch_list_matching mips2 !singlefloat]
 612     run_dump_test_arches "ldc1-forward" [mips_arch_list_matching mips2 !singlefloat]
 613     run_dump_test_arches "sdc1"         [mips_arch_list_matching mips2 !singlefloat]
 614     run_dump_test_arches "sdc1-forward" [mips_arch_list_matching mips2 !singlefloat]
 615     if $has_newabi {
 616         run_dump_test_arches "ld-n32"   [mips_arch_list_matching mips3]
 617         run_dump_test_arches "ld-forward-n32" \
 618                                         [mips_arch_list_matching mips3]
 619         run_dump_test_arches "sd-n32"   [mips_arch_list_matching mips3]
 620         run_dump_test_arches "sd-forward-n32" \
 621                                         [mips_arch_list_matching mips3]
 622         run_dump_test_arches "l_d-n32"  [mips_arch_list_matching mips3 !singlefloat]
 623         run_dump_test_arches "l_d-forward-n32" \
 624                                         [mips_arch_list_matching mips3 !singlefloat]
 625         run_dump_test_arches "s_d-n32"  [mips_arch_list_matching mips3 !singlefloat]
 626         run_dump_test_arches "s_d-forward-n32" \
 627                                         [mips_arch_list_matching mips3 !singlefloat]
 628         run_dump_test_arches "ldc1-n32" [mips_arch_list_matching mips3 !singlefloat]
 629         run_dump_test_arches "ldc1-forward-n32" \
 630                                         [mips_arch_list_matching mips3 !singlefloat]
 631         run_dump_test_arches "sdc1-n32" [mips_arch_list_matching mips3 !singlefloat]
 632         run_dump_test_arches "sdc1-forward-n32" \
 633                                         [mips_arch_list_matching mips3 !singlefloat]
 634         run_dump_test_arches "ld-n64"   [mips_arch_list_matching mips3]
 635         run_dump_test_arches "ld-forward-n64" \
 636                                         [mips_arch_list_matching mips3]
 637         run_dump_test_arches "sd-n64"   [mips_arch_list_matching mips3]
 638         run_dump_test_arches "sd-forward-n64" \
 639                                         [mips_arch_list_matching mips3]
 640         run_dump_test_arches "l_d-n64"  [mips_arch_list_matching mips3 !singlefloat]
 641         run_dump_test_arches "l_d-forward-n64" \
 642                                         [mips_arch_list_matching mips3 !singlefloat]
 643         run_dump_test_arches "s_d-n64"  [mips_arch_list_matching mips3 !singlefloat]
 644         run_dump_test_arches "s_d-forward-n64" \
 645                                         [mips_arch_list_matching mips3 !singlefloat]
 646         run_dump_test_arches "ldc1-n64" [mips_arch_list_matching mips3 !singlefloat]
 647         run_dump_test_arches "ldc1-forward-n64" \
 648                                         [mips_arch_list_matching mips3 !singlefloat]
 649         run_dump_test_arches "sdc1-n64" [mips_arch_list_matching mips3 !singlefloat]
 650         run_dump_test_arches "sdc1-forward-n64" \
 651                                         [mips_arch_list_matching mips3 !singlefloat]
 652     }
 653     run_dump_test_arches "ld-zero"      [mips_arch_list_matching mips1]
 654     run_dump_test_arches "ld-zero-2"    [mips_arch_list_matching mips2 !nollsc]
 655     run_dump_test_arches "ld-zero-3"    [mips_arch_list_matching mips3 !nollsc]
 656     run_dump_test_arches "ld-zero-u"    [mips_arch_list_matching micromips]
 657     run_dump_test_arches "ld-zero-q"    [mips_arch_list_matching r5900]
 658     run_dump_test "ld-svr4pic"
 659     run_dump_test "ld-xgot"
 660     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 661     run_dump_test "lifloat"
 662     run_dump_test "lif-svr4pic"
 663     run_dump_test "lif-xgot"
 664     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 665     run_dump_test_arches "mips4-fp" "-32" \
 666                                         [mips_arch_list_matching fpisa4]
 667     run_dump_test_arches "mips4-fp" "-mabi=o64" \
 668                                         [mips_arch_list_matching fpisa4 gpr64]
 669     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 670                                         [mips_arch_list_matching fpisa4]
 671     run_dump_test_arches "mips4-branch-likely" \
 672                                         [mips_arch_list_matching mips4]
 673     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 674                                         [mips_arch_list_matching mips4]
 675     run_dump_test_arches "mips5-fp" "-32" \
 676                                         [mips_arch_list_matching fpisa5]
 677     run_dump_test_arches "mips5-fp" "-mabi=o64" \
 678                                         [mips_arch_list_matching fpisa5 gpr64]
 679     run_dump_test "mul"
 680
 681     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 682     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 683
 684     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 685     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 686
 687     run_dump_test "sb"
 688     run_dump_test "trunc"
 689     run_dump_test "ulh"
 690     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 691     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 692     run_dump_test "ulh-svr4pic"
 693     run_dump_test "ulh-xgot"
 694     run_dump_test "ulw"
 695     run_dump_test "uld"
 696     run_dump_test "ush"
 697     run_dump_test "usw"
 698     run_dump_test "usd"
 699     run_dump_test_arches "ulw2-eb" [mips_arch_list_matching mips1 !gpr_ilocks]
 700     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 701     run_dump_test_arches "ulw2-el" [mips_arch_list_matching mips1 !gpr_ilocks]
 702     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 703
 704     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 705     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 706
 707     run_dump_test "mips16"
 708     run_dump_test "mips16-64"
 709     run_dump_test "mips16-macro"
 710     # Check MIPS16e extensions
 711     run_dump_test_arches "mips16e" [mips_arch_list_matching mips32 !micromips]
 712     # Check jalx handling
 713     run_dump_test "mips16-jalx"
 714     run_dump_test "mips-jalx"
 715     run_dump_test "mips-jalx-2"
 716     # Check MIPS16 HI16/LO16 relocations
 717     run_dump_test "mips16-hilo"
 718     if $has_newabi {
 719         run_dump_test "mips16-hilo-n32"
 720     }
 721     run_dump_test "mips16-hilo-match"
 722     run_dump_test "delay"
 723     run_dump_test "nodelay"
 724     run_dump_test "mips4010"
 725     run_dump_test "mips4650"
 726     run_dump_test "mips4100"
 727     run_dump_test "vr4111"
 728     run_dump_test "vr4120"
 729     run_dump_test "vr4120-2"
 730     run_dump_test "vr4130"
 731     run_dump_test "vr5400"
 732     run_list_test "vr5400-ill" "-march=vr5400"
 733     run_dump_test "vr5500"
 734     run_dump_test "rm7000"
 735     run_dump_test "perfcount"
 736     run_dump_test "lineno"
 737     run_dump_test "sync"
 738
 739     run_dump_test_arches "virt"         [mips_arch_list_matching mips32r2]
 740     run_dump_test_arches "virt64"       [mips_arch_list_matching mips64r2]
 741
 742     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 743     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 744
 745     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 746     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 747                                         [mips_arch_list_matching mips32]
 748     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 749                                             !octeon]
 750
 751     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 752     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 753                                             !octeon]
 754     run_dump_test_arches "mips32r2-fp32" \
 755                                         [mips_arch_list_matching mips32r2]
 756     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 757                                         [mips_arch_list_matching mips32r2]
 758     run_list_test_arches "mips32r2-ill" "-32" \
 759                         [mips_arch_list_matching mips32r2 gpr32]
 760     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 761                         [mips_arch_list_matching mips32r2 gpr64]
 762     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 763                         [mips_arch_list_matching mips32r2]
 764
 765     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 766     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 767                                             !octeon]
 768
 769     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 770     run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
 771
 772     run_dump_test "set-arch"
 773
 774     if { !$addr32 } {
 775         run_dump_test "mips64-mips3d"
 776         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 777
 778         run_dump_test "mips64-mdmx"
 779         run_dump_test "sb1-ext-mdmx"
 780         run_dump_test "sb1-ext-ps"
 781         run_dump_test "xlr-ext"
 782     }
 783
 784     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 785     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 786     run_dump_test "relax-swap1-mips1"
 787     run_dump_test "relax-swap1-mips2"
 788     run_dump_test "relax-swap2"
 789     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 790     run_list_test_arches "relax-bc1any" "-mips3d -mabi=o64 -relax-branch" \
 791                                         [mips_arch_list_matching mips64 \
 792                                             !micromips]
 793     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 794                                         [mips_arch_list_matching mips64r2 \
 795                                             !micromips]
 796
 797     run_dump_test_arches "eva"          [mips_arch_list_matching mips32r2 !octeon]
 798
 799     run_list_test "illegal" "-32"
 800     run_list_test "baddata1" "-32"
 801     run_list_test "jalr" ""
 802
 803     run_dump_test "mips-gp32-fp32"
 804     run_dump_test "mips-gp32-fp64"
 805     run_dump_test "mips-gp64-fp32"
 806     run_dump_test "mips-gp64-fp64"
 807
 808     # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 809     # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 810     # and verify that they're the same.  Specifically, we're checking
 811     # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 812     # instruction does get used.  In previous versions of GAS,
 813     # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 814     run_dump_test "elf_e_flags1"
 815     run_dump_test "elf_e_flags2"
 816     run_dump_test "elf_e_flags3"
 817     run_dump_test "elf_e_flags4"
 818
 819     # Check EF_MIPS_ARCH markings for each supported architecture.
 820     run_dump_test "elf_arch_mips1"
 821     run_dump_test "elf_arch_mips2"
 822     run_dump_test "elf_arch_mips3"
 823     run_dump_test "elf_arch_mips4"
 824     run_dump_test "elf_arch_mips5"
 825     run_dump_test "elf_arch_mips32"
 826     run_dump_test "elf_arch_mips32r2"
 827     run_dump_test "elf_arch_mips64"
 828     run_dump_test "elf_arch_mips64r2"
 829
 830     # Verify that ASE markings are handled properly.
 831     run_dump_test "elf_ase_mips16"
 832     run_dump_test "elf_ase_mips16-2"
 833
 834     run_dump_test "elf_ase_micromips"
 835     run_dump_test "elf_ase_micromips-2"
 836
 837     run_dump_test "mips-gp32-fp32-pic"
 838     run_dump_test "mips-gp32-fp64-pic"
 839     run_dump_test "mips-gp64-fp32-pic"
 840     run_dump_test "mips-gp64-fp64-pic"
 841
 842     run_dump_test "mips-abi32"
 843     run_dump_test "mips-abi32-pic"
 844     run_dump_test "mips-abi32-pic2"
 845
 846     run_dump_test "elf${el}-rel"
 847     run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64 !singlefloat]
 848     run_dump_test "e32${el}-rel2"
 849     run_dump_test "elf${el}-rel3"
 850     run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 851     run_dump_test "e32-rel4"
 852     run_dump_test "elf-rel5"
 853     run_dump_test "elf-rel6"
 854     if $has_newabi {
 855         run_dump_test "elf-rel6-n32"
 856         run_dump_test "elf-rel6-n64"
 857     }
 858     run_dump_test "elf-rel7"
 859     run_dump_test "elf-rel8"
 860     run_dump_test "elf-rel8-mips16"
 861     run_dump_test "elf-rel9"
 862     run_dump_test "elf-rel9-mips16"
 863     if $has_newabi {
 864         run_dump_test "elf-rel10"
 865         run_dump_test "elf-rel11"
 866     }
 867     run_dump_test "elf-rel12"
 868     run_dump_test "elf-rel13"
 869     run_dump_test "elf-rel13-mips16"
 870     run_dump_test "elf-rel14"
 871
 872     if $has_newabi {
 873         run_dump_test "elf-rel15"
 874         run_dump_test "elf-rel16"
 875
 876         run_dump_test "elf-rel-got-n32"
 877         run_dump_test "elf-rel-xgot-n32"
 878         run_dump_test "elf-rel-got-n64"
 879         run_dump_test "elf-rel-xgot-n64"
 880     }
 881     run_dump_test "elf-rel17"
 882     if $has_newabi {
 883         run_dump_test "elf-rel18"
 884     }
 885     run_dump_test "elf-rel19"
 886     run_dump_test "elf-rel20"
 887     if $has_newabi {
 888         run_dump_test "elf-rel21"
 889         run_dump_test "elf-rel22"
 890         run_dump_test "elf-rel23"
 891         run_dump_test "elf-rel23a"
 892         run_dump_test "elf-rel23b"
 893         run_dump_test "elf-rel24"
 894     }
 895
 896     run_dump_test "elf-rel25"
 897     run_dump_test "elf-rel25a"
 898     run_dump_test "elf-rel26"
 899
 900     run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 901
 902     if $has_newabi {
 903         run_dump_test "elf-rel28-n32"
 904         run_dump_test "elf-rel28-n64"
 905         run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3]
 906     }
 907     run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all]
 908
 909     run_dump_test "${tmips}mips${el}16-e"
 910     run_dump_test "${tmips}mips${el}16-f"
 911
 912     run_dump_test "elf-consthilo"
 913     run_dump_test "expr1"
 914
 915     run_list_test "tls-ill" "-32"
 916     run_dump_test "tls-o32"
 917     run_dump_test "tls-relw"
 918     run_dump_test "jalr2"
 919     run_dump_test_arches "jalr3"        [mips_arch_list_matching mips1 \
 920                                         !micromips]
 921     if $has_newabi {
 922         run_dump_test_arches "jalr3-n32" \
 923                                     [mips_arch_list_matching mips3 \
 924                                         !micromips]
 925         run_dump_test_arches "jalr3-n64" \
 926                                     [mips_arch_list_matching mips3 \
 927                                         !micromips]
 928     }
 929
 930     run_dump_test_arches "aent" [mips_arch_list_matching mips1]
 931
 932     run_dump_test_arches "branch-misc-4"        [mips_arch_list_matching mips1]
 933     run_dump_test_arches "branch-misc-4-64"     [mips_arch_list_matching mips3]
 934
 935     run_dump_test_arches "loc-swap"     [mips_arch_list_all]
 936     run_dump_test_arches "loc-swap-dis" [mips_arch_list_all]
 937     run_dump_test_arches "loc-swap-2"   [mips_arch_list_all]
 938     run_dump_test_arches "loc-swap-3"   [mips_arch_list_all]
 939
 940     run_dump_test "nan-legacy-1"
 941     run_dump_test "nan-legacy-2"
 942     run_dump_test "nan-legacy-3"
 943     run_dump_test "nan-legacy-4"
 944     run_dump_test "nan-legacy-5"
 945
 946     run_dump_test "nan-2008-1"
 947     run_dump_test "nan-2008-2"
 948     run_dump_test "nan-2008-3"
 949     run_dump_test "nan-2008-4"
 950
 951     run_list_test "nan-error-1"
 952     run_list_test "nan-error-2" "-mnan=foo"
 953
 954     if $has_newabi {
 955         run_dump_test "n32-consec"
 956     }
 957
 958     # tests of objdump's ability to disassemble using different
 959     # register names.
 960     run_dump_test "gpr-names-numeric"
 961     run_dump_test "gpr-names-32"
 962     run_dump_test "gpr-names-n32"
 963     run_dump_test "gpr-names-64"
 964
 965     run_dump_test "fpr-names-numeric"
 966     run_dump_test "fpr-names-32"
 967     run_dump_test "fpr-names-n32"
 968     run_dump_test "fpr-names-64"
 969
 970     run_dump_test "cp0-names-numeric"
 971     run_dump_test "cp0-names-r3000"
 972     run_dump_test "cp0-names-r4000" \
 973                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 974     run_dump_test "cp0-names-r4000" \
 975                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 976     run_dump_test "cp0-names-mips32"
 977     run_dump_test "cp0-names-mips32r2"
 978     run_dump_test "cp0-names-mips64"
 979     run_dump_test "cp0-names-mips64r2"
 980     run_dump_test "cp0-names-sb1"
 981
 982     run_dump_test "cp0sel-names-numeric"
 983     run_dump_test "cp0sel-names-mips32"
 984     run_dump_test "cp0sel-names-mips32r2"
 985     run_dump_test "cp0sel-names-mips64"
 986     run_dump_test "cp0sel-names-mips64r2"
 987     run_dump_test "cp0sel-names-sb1"
 988
 989     run_dump_test "cp1-names-numeric"
 990     run_dump_test "cp1-names-r3000"
 991     run_dump_test "cp1-names-r4000" \
 992                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 993     run_dump_test "cp1-names-r4000" \
 994                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 995     run_dump_test "cp1-names-mips32"
 996     run_dump_test "cp1-names-mips32r2"
 997     run_dump_test "cp1-names-mips64"
 998     run_dump_test "cp1-names-mips64r2"
 999     run_dump_test "cp1-names-sb1"
1000
1001     run_dump_test "hwr-names-numeric"
1002     run_dump_test "hwr-names-mips32r2"
1003     run_dump_test "hwr-names-mips64r2"
1004
1005     run_dump_test "ldstla-32"
1006     run_dump_test "ldstla-32-mips3"
1007     run_dump_test "ldstla-32-shared"
1008     run_dump_test "ldstla-32-mips3-shared"
1009     run_list_test "ldstla-32-1" "-mabi=32" \
1010         "MIPS ld-st-la bad constants (ABI o32)"
1011     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
1012         "MIPS ld-st-la bad constants (ABI o32, mips3)"
1013     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
1014         "MIPS ld-st-la bad constants (ABI o32, shared)"
1015     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
1016         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
1017     run_dump_test "ldstla-eabi64"
1018     if $has_newabi {
1019         run_dump_test "ldstla-n64"
1020         run_dump_test "ldstla-n64-shared"
1021         run_dump_test "ldstla-n64-sym32"
1022     }
1023
1024     run_dump_test "macro-warn-1"
1025     run_dump_test "macro-warn-2"
1026     run_dump_test "macro-warn-3"
1027     run_dump_test "macro-warn-4"
1028     if $has_newabi {
1029         run_dump_test "macro-warn-1-n32"
1030         run_dump_test "macro-warn-2-n32"
1031     }
1032
1033     run_dump_test "noat-1"
1034     run_list_test "noat-2" ""
1035     run_list_test "noat-3" ""
1036     run_list_test "noat-4" ""
1037     run_list_test "noat-5" ""
1038     run_list_test "noat-6" ""
1039     run_list_test "noat-7" ""
1040
1041     run_dump_test "at-1"
1042     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
1043
1044     run_dump_test "loongson-2e"
1045     run_dump_test "loongson-2f"
1046     run_dump_test "loongson-2f-2"
1047     run_dump_test "loongson-2f-3"
1048
1049     run_dump_test "loongson-3a"
1050     run_dump_test "loongson-3a-2"
1051     run_dump_test "loongson-3a-3"
1052
1053     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
1054     run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
1055     run_list_test_arches "octeon-ill"   [mips_arch_list_matching octeon]
1056     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
1057     run_dump_test_arches "octeon2"      [mips_arch_list_matching octeon2]
1058
1059     run_dump_test "smartmips"
1060     run_dump_test_arches "mips32-dsp"   [mips_arch_list_matching mips32r2 \
1061                                             !octeon]
1062     run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \
1063                                             !octeon]
1064     run_dump_test "mips64-dsp"
1065     run_dump_test "mips32-mt"
1066
1067     run_dump_test "mips16-dwarf2"
1068     if $has_newabi {
1069         run_dump_test "mips16-dwarf2-n32"
1070     }
1071     run_dump_test "mips16-stabs"
1072
1073     run_dump_test "mips16e-jrc"
1074     run_dump_test "mips16e-save"
1075     run_list_test "mips16e-save-err" "-march=mips32 -32"
1076     run_dump_test "mips16e-64"
1077     run_list_test "mips16e-64" "-march=mips32 -32"
1078     run_dump_test "mips16-intermix"
1079
1080     run_dump_test "vxworks1"
1081     run_dump_test "vxworks1-xgot"
1082     run_dump_test "vxworks1-el"
1083     run_dump_test "vxworks1-xgot-el"
1084
1085     run_dump_test "noreorder"
1086     run_dump_test "align"
1087     run_dump_test "align2"
1088     run_dump_test "align2-el"
1089     run_dump_test "align3"
1090     run_dump_test "odd-float"
1091     run_dump_test "ehword"
1092
1093     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1094                                         [mips_arch_list_matching mips2]
1095     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1096                                         [mips_arch_list_matching mips2]
1097
1098     run_list_test_arches "mips-hard-float-flag" \
1099         "-32 -msoft-float -mhard-float" \
1100         [mips_arch_list_matching mips1 !singlefloat]
1101     run_list_test_arches "mips-double-float-flag" \
1102         "-32 -msingle-float -mdouble-float" \
1103         [mips_arch_list_matching mips1 !singlefloat]
1104
1105     run_dump_test "mips16-vis-1"
1106     run_dump_test "call-nonpic-1"
1107     run_dump_test "mips32-sync"
1108     run_dump_test_arches "mips32r2-sync" \
1109                                         [mips_arch_list_matching mips32r2]
1110     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1111     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1112                                         [mips_arch_list_matching mips3] \
1113                                         [mips_arch_list_matching mips32] ] ]
1114     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1115     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1116                                         [mips_arch_list_matching mips4] \
1117                                         [mips_arch_list_matching mips32] ] ]
1118
1119     if $has_newabi { run_dump_test "cfi-n64-1" }
1120
1121     run_dump_test "pr12915"
1122     run_dump_test "reginfo-1a"
1123     run_dump_test "reginfo-1b"
1124
1125     run_dump_test "micromips"
1126     run_dump_test "micromips-trap"
1127     run_dump_test "micromips-insn32"
1128     run_dump_test "micromips-noinsn32"
1129     run_list_test "micromips" "-mips32r2 -32 -mfp64 -minsn32" \
1130         "microMIPS for MIPS32r2 (instructions invalid in insn32 mode)"
1131     run_list_test "micromips-size-0" \
1132         "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1133     run_dump_test "micromips-size-1"
1134     run_dump_test "micromips-branch-relax"
1135     run_dump_test "micromips-branch-relax-pic"
1136     run_dump_test "micromips-branch-delay"
1137     run_dump_test "micromips-warn-branch-delay"
1138     run_dump_test "micromips-warn-branch-delay-1"
1139     run_dump_test "micromips-b16"
1140     run_list_test "micromips-ill"
1141
1142     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1143                                             !octeon]
1144     run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all]
1145     run_dump_test_arches "hilo-diff-el" [mips_arch_list_all]
1146     if $has_newabi {
1147         run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3]
1148         run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3]
1149         run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3]
1150         run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3]
1151     }
1152     run_dump_test_arches "lui"          [mips_arch_list_matching mips1]
1153     run_list_test_arches "lui-1" "-32"  [mips_arch_list_matching mips1]
1154     run_list_test_arches "lui-2" "-32"  [mips_arch_list_matching mips1]
1155
1156     run_dump_test "r5900"
1157     run_dump_test "r5900-full"
1158     run_list_test "r5900-nollsc" "-mabi=o64 -march=r5900"
1159     run_dump_test "r5900-vu0"
1160     run_dump_test "r5900-full-vu0"
1161     run_dump_test "r5900-all-vu0"
1162     run_list_test "r5900-error-vu0" "-march=r5900"
1163
1164     run_list_test_arches "ext-ill"      [mips_arch_list_matching mips64r2]
1165
1166     run_list_test "ase-errors-1" "-mabi=32 -march=mips1" "ASE errors (1)"
1167     run_list_test "ase-errors-2" "-mabi=o64 -march=mips3" "ASE errors (2)"
1168     run_list_test "ase-errors-3" "-mabi=32 -march=mips1" "ASE errors (3)"
1169     run_list_test "ase-errors-4" "-mabi=o64 -march=mips3" "ASE errors (4)"
1170
1171     run_dump_test_arches "la-reloc"     [mips_arch_list_matching mips1]
1172     if { $has_newabi } {
1173         run_dump_test_arches "dla-reloc" [mips_arch_list_matching mips3]
1174     }
1175
1176     # Start with MIPS II to avoid load delay nops.
1177     run_dump_test_arches "ld-reloc"     [mips_arch_list_matching mips2]
1178     run_dump_test_arches "ulw-reloc"    [mips_arch_list_matching mips2]
1179     run_dump_test_arches "ulh-reloc"    [mips_arch_list_matching mips2]
1180
1181     run_dump_test "l_d-reloc"
1182     run_list_test "bltzal"
1183
1184     run_dump_test_arches "msa"          [mips_arch_list_matching mips32r2]
1185     run_dump_test_arches "msa64"        [mips_arch_list_matching mips64r2]
1186     run_dump_test_arches "msa-relax"    [mips_arch_list_matching mips32r2]
1187     run_dump_test_arches "msa-branch"   [mips_arch_list_matching mips32r2]
1188
1189     run_dump_test_arches "xpa"          [mips_arch_list_matching mips32r2 !micromips]
1190     run_dump_test_arches "r5"           [mips_arch_list_matching mips32r5 !micromips]
1191
1192     run_dump_test "pcrel-1"
1193     run_dump_test "pcrel-2"
1194     run_list_test "pcrel-3" "" "Invalid cross-section PC-relative references"
1195     run_dump_test "pcrel-4-32"
1196     if $has_newabi {
1197         run_dump_test "pcrel-4-n32"
1198         run_dump_test "pcrel-4-64"
1199     }
1200
1201     run_dump_test "attr-gnu-abi-fp-1"
1202     run_dump_test "attr-gnu-abi-msa-1"
1203
1204     run_dump_test "module-override"
1205     run_dump_test "module-defer-warn1"
1206     run_list_test "module-defer-warn2" -32
1207 }