1 2013-03-27 Markus Metzger <markus.t.metzger@intel.com>
3 * record.c (command_size_to_target_size): Fix size comparison.
4 Change parameter type from pointer to integer to integer.
7 2013-03-27 Pierre Muller <muller@sourceware.org>
9 * windows-nat.c (handle_output_debug_string): Avoid typecast
10 from integer of different size warning.
12 2013-03-26 Joel Brobecker <brobecker@adacore.com>
14 * windows-nat.c (handle_output_debug_string): Add empty line
15 after local block variable definition.
17 2013-03-26 Pedro Alves <palves@redhat.com>
19 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
20 (net_open): Make 'polls' local unsigned.
22 2013-03-26 Pedro Alves <palves@redhat.com>
24 * remote.c (_initialize_remote): Make "set remoteaddresssize"
25 a zuinteger command instead of uinteger.
27 2013-03-26 Pedro Alves <palves@redhat.com>
29 * record-full.c (record_full_insn_num): Make it unsigned.
30 (record_full_check_insn_num, record_full_message)
31 (record_full_registers_change, record_full_xfer_partial): Remove
32 record_full_insn_max_num check (it's always != 0).
33 (record_full_info, record_full_restore): Use %u as format string.
34 (): Use %u as format string.
35 (set_record_full_insn_max_num): Remove record_full_insn_max_num
36 check (it's always != 0).
38 2013-03-26 Pedro Alves <palves@redhat.com>
40 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
41 and "set dcache size" commands zuinteger instead of uinteger.
43 2013-03-26 Pedro Alves <palves@redhat.com>
45 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
46 command zuinteger instead of uinteger.
48 2013-03-26 Pedro Alves <palves@redhat.com>
50 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
51 zuinteger instead of uinteger.
53 2013-03-26 Pedro Alves <palves@redhat.com>
55 * record.c (record_insn_history_size_setshow_var)
56 (record_call_history_size_setshow_var): New globals.
57 (command_size_to_target_size): New function.
58 (cmd_record_insn_history, cmd_record_call_history): Use
59 command_size_to_target_size instead of cast.
60 (validate_history_size, set_record_insn_history_size)
61 (set_record_call_history_size): New functions.
62 (_initialize_record): Install set_record_insn_history_size and
63 set_record_call_history_size as "set" hooks of "set record
64 instruction-history-size" and "set record
65 function-call-history-size".
67 2013-03-26 Pedro Alves <palves@redhat.com>
69 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
70 use with history_max_entries use. Remove FIXME note.
72 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
74 * record-btrace.c (record_btrace_close): Call
75 record_btrace_auto_disable.
77 2013-03-25 Joel Brobecker <brobecker@adacore.com>
79 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
81 2013-03-25 Doug Evans <dje@google.com>
83 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
85 2013-03-25 Tom Tromey <tromey@redhat.com>
88 * c-exp.y (exp): Add new productions for destructors after '.' and
90 (write_destructor_name): New function.
92 2013-03-25 Tom Tromey <tromey@redhat.com>
95 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
96 value_struct_elt, not lookup_struct_elt_type.
97 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
98 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
99 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
101 2013-03-25 Yao Qi <yao@codesourcery.com>
103 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
106 2013-03-23 Eli Zaretskii <eliz@gnu.org>
108 * windows-nat.c (windows_get_absolute_argv0): New function.
109 * windows-nat.h: Add its prototype.
111 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
112 Use IS_DIR_SEPARATOR instead of looking for a character inside
113 SLASH_STRING. Include filenames.h.
114 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
115 relocate_gdb_directory works when passed gdb_program_name.
116 Include windows-nat.h.
118 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
120 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
121 * remote.c (trace_error): Remove the special handling of '2'.
122 (readchar) <SERIAL_EOF>
123 (readchar) <SERIAL_ERROR>
124 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
125 (remote_get_trace_status): Call throw_exception if EX is
127 * utils.c (perror_with_name): Rename to ...
128 (throw_perror_with_name): ... here. New parameter errcode, describe it
129 in the function comment.
130 (perror_with_name): New function wrapper.
131 * utils.h (enum errors): New stub declaration.
132 (throw_perror_with_name): New declaration.
134 2013-03-22 Pedro Alves <palves@redhat.com>
135 Yao Qi <yao@codesourcery.com>
136 Mark Kettenis <kettenis@gnu.org>
138 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
139 Don't let the user set the value to UINT_MAX directly.
140 <var_integer>: Don't let the user set the value to INT_MAX
143 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
145 * remote.c (remote_unpush_target): New function.
146 (remote_open_1): Remove two pop_target calls, update one comment, add
147 comment to target_preopen call. Replace pop_target call by
148 remote_unpush_target call.
149 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
150 pop_target calls by remote_unpush_target calls.
152 2013-03-22 Pedro Alves <palves@redhat.com>
154 * linux-nat.c (linux_child_follow_fork): Don't call
155 linux_enable_event_reporting.
156 (linux_handle_extended_wait): Don't call
157 linux_enable_event_reporting.
159 2013-03-22 Pedro Alves <palves@redhat.com>
161 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
162 use it to rewrite the trampoline buffers with type gdb_byte[], and
163 undefine the macro. Remove char* cast.
165 2013-03-21 Doug Evans <dje@google.com>
167 New commands "mt set per-command {space,time,symtab} {on,off}".
169 * event-top.c: #include "maint.h".
170 * main.c: #include "maint.h".
171 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
172 timeval-utils.h, maint.h, cli/cli-setshow.h.
173 (per_command_time, per_command_space): New static globals.
174 (per_command_symtab): New static global.
175 (per_command_setlist, per_command_showlist): New static globals.
176 (struct cmd_stats): Move here from utils.c.
177 (set_per_command_time): Renamed from set_display_time in utils.c
178 and moved here. All callers updated.
179 (set_per_command_space): Renamed from set_display_space in utils.c
180 and moved here. All callers updated.
181 (count_symtabs_and_blocks): New function.
182 (report_command_stats): Moved here from utils.c. Add support for
183 printing symtab stats. Only print data if enabled before command
185 (make_command_stats_cleanup): Ditto.
186 (sert_per_command_cmd, show_per_command_cmd): New functions.
187 (_initialize_maint_cmds): Add new commands
188 mt set per-command {space,time,symtab} {on,off}.
190 * top.c: #include "maint.h".
191 * utils.c (reset_prompt_for_continue_wait_time): New function.
192 (get_prompt_for_continue_wait_time): New function.
193 * utils.h (reset_prompt_for_continue_wait_time): Declare
194 (get_prompt_for_continue_wait_time): Declare.
195 (make_command_stats_cleanup): Moved to maint.h.
196 (set_display_time, set_display_space): Moved to maint.h and renamed
197 to set_per_command_time, set_per_command_space.
198 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
199 parse_binary_operation and made non-static. Don't call error,
200 just return an error marker. All callers updated.
201 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
203 2013-03-21 Tom Tromey <tromey@redhat.com>
205 * symfile.c (alloc_section_addr_info): Update header. Don't set
206 'num_sections' field.
207 (build_section_addr_info_from_section_table): Set 'num_sections'.
208 (build_section_addr_info_from_bfd): Likewise.
209 (build_section_addr_info_from_objfile): Remove dead loop
211 (free_section_addr_info): Unconditionally call xfree.
212 (relative_addr_info_to_section_offsets, addrs_section_sort)
213 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
215 (syms_from_objfile_1): Remove dead 'if' condition. Check
217 (add_symbol_file_command): Set 'num_sections'.
218 * symfile-mem.c (symbol_file_add_from_memory): Set
220 * somread.c (som_symfile_offsets): Remove dead loop condition.
221 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
222 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
224 2013-03-21 Tom Tromey <tromey@redhat.com>
226 * tracepoint.h (decode_agent_options): Add 'trace_string'
228 * tracepoint.c (decode_agent_options): Add 'trace_string'
230 (validate_actionline): Update.
231 (collect_symbol): Add 'trace_string' argument.
232 (struct add_local_symbols_data) <trace_string>: New field.
233 (do_collect_symbol): Update.
234 (add_local_symbols): Add 'trace_string' argument.
235 (encode_actions_1): Update.
236 (trace_dump_actions): Update.
237 * dwarf2loc.c (access_memory): Update.
238 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
239 * ax-general.c (new_agent_expr): Update.
240 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
241 (gen_trace_for_return_address): Add argument.
242 (trace_kludge, trace_string_kludge): Remove.
243 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
244 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
245 (gen_trace_for_var): Add 'trace_string' argument.
246 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
247 (gen_printf, agent_eval_command_one): Update.
249 2013-03-21 Tom Tromey <tromey@redhat.com>
252 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
253 Handle FILENAME token.
255 2013-03-21 Tom Tromey <tromey@redhat.com>
257 * c-exp.y (YYPRINT): Define.
258 (c_print_token): New function.
260 2013-03-21 Tom Tromey <tromey@redhat.com>
262 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
264 2013-03-21 Yao Qi <yao@codesourcery.com>
266 * ctf.c: Include "gdb_stat.h".
267 [USE_WIN32API]: New macro 'mkdir'.
268 (ctf_start): Use permission bits macros if they are defined.
270 2013-03-20 Keith Seitz <keiths@redhat.com>
272 * breakpoint.h (struct breakpoint): Add comment to
273 extra_string indicating that this member is mallod'd.
274 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
276 2013-03-20 Pedro Alves <palves@redhat.com>
280 * cli/cli-setshow.c (do_set_command)
281 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
282 the result of parsing the command argument. Throw error if the
283 value is greater than UINT_MAX. Print the invalid value with
285 <var_integer, var_zinteger>: Use LONGEST for variable holding the
286 result of parsing the command argument. Throw error if the value
287 is greater than INT_MAX, not greater or equal. Also throw error
288 if the value is less than INT_MIN. Print the invalid value with
290 <var_zuinteger_unlimited>: Throw error if the value is greater
291 than INT_MAX, not greater or equal.
292 (do_show_command) <var_integer, var_zinteger,
293 var_zuinteger_unlimited>: Use %d for printing int, not %u.
295 2013-03-20 Tom Tromey <tromey@redhat.com>
297 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
299 * dwarf2read.c (read_func_scope): Remove old FIXME.
300 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
302 * findvar.c (symbol_read_needs_frame, default_read_var_value):
303 Unconditionally call via computed ops, if possible.
304 * printcmd.c (address_info): Unconditionally call via computed ops,
306 * stack.c (read_frame_arg): Unconditionally call via computed ops,
308 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
309 * tracepoint.c (scope_info): Unconditionally call via computed ops,
312 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
313 Tom Tromey <tromey@redhat.com>
316 * coffread.c (coff_register_index): New global.
317 (process_coff_symbol, coff_read_enum_type): Set
319 (_initialize_coffread): Initialize new global.
320 * dwarf2loc.c (locexpr_find_frame_base_location)
321 (dwarf2_block_frame_base_locexpr_funcs)
322 (loclist_find_frame_base_location)
323 (dwarf2_block_frame_base_loclist_funcs): New.
324 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
325 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
326 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
327 (dwarf2_block_frame_base_loclist_funcs): New.
328 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
329 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
331 (read_func_scope): Update.
332 (fixup_go_packaging, mark_common_block_symbol_computed)
333 (var_decode_location, new_symbol_full, dwarf2_const_value):
334 Set SYMBOL_ACLASS_INDEX.
335 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
336 (_initialize_dwarf2_read): Initialize new globals.
337 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
338 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
339 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
341 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
342 (_initialize_mdebugread): Initialize new globals.
343 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
344 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
345 (stab_register_index, stab_regparm_index): New globals.
346 (define_symbol, read_enum_type, common_block_end): Set
348 (_initialize_stabsread): Initialize new globals.
349 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
351 (MAX_SYMBOL_IMPLS): New define.
352 (register_symbol_computed_impl, register_symbol_block_impl)
353 (register_symbol_register_impl)
354 (initialize_ordinary_address_classes): New functions.
355 (_initialize_symtab): Call initialize_ordinary_address_classes.
356 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
357 (struct symbol_impl): New.
358 (SYMBOL_ACLASS_BITS): New define.
359 (struct symbol) <aclass, ops>: Remove fields.
360 <aclass_index>: New field.
361 (symbol_impls): Declare.
362 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
363 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
364 (register_symbol_computed_impl, register_symbol_block_impl)
365 (register_symbol_register_impl): Declare.
366 (struct symbol_computed_ops): Add location_has_loclist.
367 (struct symbol_block_ops): New.
368 (SYMBOL_BLOCK_OPS): New.
369 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
371 2013-03-20 Tom Tromey <tromey@redhat.com>
373 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
374 (print_partial_symbols, recursively_search_psymtabs): Use
377 2013-03-20 Pierre Muller <muller@sourceware.org>
379 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
380 addtion, subtraction, multiplication and division binary operator.
382 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
385 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
386 * bsd-kvm.c (bsd_kvm_close): Likewise.
387 * bsd-uthread.c (bsd_uthread_close): Likewise.
388 * corelow.c (core_close): Likewise.
389 (core_close_cleanup): Remove parameter quitting from a caller.
390 * event-top.c (async_disconnect): Likewise.
391 * exec.c (exec_close_1): Remove parameter quitting.
392 * go32-nat.c (go32_close): Likewise.
393 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
394 parameter quitting from a caller.
395 * mips-linux-nat.c (super_close): Remove parameter quitting from the
397 (mips_linux_close): Remove parameter quitting. Remove parameter
398 quitting from a caller.
399 * monitor.c (monitor_close): Remove parameter quitting.
400 * monitor.h (monitor_close): Likewise.
401 * record-btrace.c (record_btrace_close): Likewise.
402 * record-full.c (record_full_close): Likewise.
403 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
404 it also from fprintf_unfiltered.
405 * remote-mips.c (mips_close): Remove parameter quitting.
406 (mips_detach): Remove parameter quitting from a caller.
407 * remote-sim.c (gdbsim_close): Remove parameter quitting.
408 (gdbsim_close): Remove duplicate function comment. Remove parameter
409 quitting and remove it also from printf_filtered.
410 * remote.c (remote_close): Remove parameter quitting.
411 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
412 * target.c (update_current_target): Remove parameter int from to_close
414 (push_target, unpush_target, pop_target): Remove parameter quitting from
416 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
417 Remove parameter quitting from a caller.
418 (target_preopen): Remove parameter quitting from a caller.
419 (target_close): Remove parameter quitting. Remove parameter quitting
420 from a caller two times. Remove parameter quitting also from
422 * target.h (struct target_ops): Remove parameter quitting and as int
423 from fields to_xclose and to_close.
424 (extern struct target_ops current_target):
425 (target_close, pop_all_targets): Remove parameter quitting. Update the
427 (pop_all_targets_above): Remove parameter quitting.
428 * top.c (quit_target): Remove parameter quitting from a caller.
429 * tracepoint.c (tfile_close): Remove parameter quitting.
430 * windows-nat.c (windows_close): Remove parameter quitting.
432 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
434 * windows-nat.c (handle_output_debug_string): Replace call
435 to string_to_core_addr with call to strtoull.
437 2013-03-20 Yao Qi <yao@codesourcery.com>
439 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
440 and write it to CTF metadata.
442 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
444 * windows-nat.c (handle_output_debug_string): Change type of n to
445 SIZE_T to avoid crash on 64 bit systems.
447 2013-03-17 Eli Zaretskii <eliz@gnu.org>
449 * python/python-internal.h (HAVE_SNPRINTF)
450 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
451 about redefinition of snprintf by pyerrors.h.
453 2013-03-15 Steve Ellcey <sellcey@mips.com>
455 * remote-sim.c (sim_command_completer): Make char arguments const.
457 2013-03-15 Tom Tromey <tromey@redhat.com>
460 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
462 2013-03-14 Tom Tromey <tromey@redhat.com>
464 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
466 (get_file_crc): Move from symfile.c.
467 (gdb_bfd_crc): New function.
468 * gdb_bfd.h (gdb_bfd_crc): Declare.
469 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
470 * symfile.c (get_file_crc): Move to gdb_bfd.c.
471 (separate_debug_file_exists): Use gdb_bfd_crc.
473 2013-03-14 Tom Tromey <tromey@redhat.com>
475 * symfile.c (get_debug_link_info): Remove.
476 (find_separate_debug_file_by_debuglink): Use
477 bfd_get_debug_link_info.
479 2013-03-14 Tom Tromey <tromey@redhat.com>
481 * symtab.c (error_in_psymtab_expansion): New function.
482 (lookup_symbol_aux_quick)
483 (basic_lookup_transparent_type_quick): Remove "last resort"
484 code. Use error_in_psymtab_expansion.
486 2013-03-14 Doug Evans <dje@google.com>
487 Jan Kratochvil <jan.kratochvil@redhat.com>
489 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
490 any successful compare_filenames_for_search or FILENAME_CMP.
491 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
492 * symtab.c (iterate_over_some_symtabs): Likewise.
494 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
496 * source.c (print_source_lines_base): Make a local copy of
499 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
500 Jan Kratochvil <jan.kratochvil@redhat.com>
502 * source.c (print_source_lines_base): Suppress "file" for TUI.
504 2013-03-14 Keith Seitz <keiths@redhat.com>
505 Alan Matsuoka <alanm@redhat.com>
509 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
511 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
514 2013-03-14 Yao Qi <yao@codesourcery.com>
516 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
517 status to tfile if trace is stopped by command 'tstop'.
519 2013-03-14 Yao Qi <yao@codesourcery.com>
521 * tracepoint.c (tfile_write_status): Write trace notes and user
522 name into tfile if they are not NULL.
524 2013-03-14 Hui Zhu <hui@codesourcery.com>
525 Yao Qi <yao@codesourcery.com>
527 * Makefile.in (REMOTE_OBS): Add ctf.o.
529 (HFILES_NO_SRCDIR): Add ctf.h.
530 * ctf.c, ctf.h: New files.
531 * tracepoint.c: Include 'ctf.h'.
532 (collect_pseudocommand): Remove static.
533 (trace_save_command): Parse option "-ctf".
534 Produce different trace file writers per option.
535 Adjust output message.
536 (trace_save_tfile, trace_save_ctf): New.
537 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
538 * mi/mi-main.c: Include 'ctf.h'.
539 (mi_cmd_trace_save): Handle option '-ctf'. Call either
540 trace_save_tfile or trace_save_ctf.
541 * NEWS: Mention these changes.
543 2013-03-14 Yao Qi <yao@codesourcery.com>
545 * tracepoint.c (trace_file_writer_xfree): New.
546 (struct tfile_writer_data): New.
547 (tfile_dtor, tfile_can_target_save, tfile_start): New.
548 (tfile_write_header, tfile_write_regblock_type): New.
549 (tfile_write_status, tfile_write_uploaded_tsv): New.
550 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
551 (tfile_write_raw_data, (tfile_end): New.
552 (tfile_write_ops): New global variable.
553 (TRACE_WRITE_R_BLOCK): New macro.
554 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
555 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
556 (TRACE_WRITE_V_BLOCK): New macro.
557 (trace_save): Add extra one parameter WRITER. Make it static.
558 Use WRITER to writer trace.
559 (tfile_trace_file_writer_new): New.
560 (trace_save_command): Caller update.
561 (trace_save_tfile): Write trace data in TFILE format.
562 * tracepoint.h (struct trace_frame_write_ops): New.
563 (struct trace_file_write_ops): New.
564 (struct trace_file_writer): New.
565 (trace_save): Remove its declaration.
566 (trace_save_tfile): Declare it.
567 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
568 instead of trace_save.
570 2013-03-13 Pedro Alves <palves@redhat.com>
572 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
574 2013-03-13 Pedro Alves <palves@redhat.com>
576 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
578 * demangle.c (current_demangling_style_string): Make it const.
579 (set_demangling_command): Assert the demangling style is known.
580 Remove all handling of unknown styles. Set
581 'current_demangling_style_string' to an element of the
582 demangling_style_names array.
583 (set_demangling_style): Delete.
584 (_initialize_demangler): Set current_demangling_style_string to the
585 element of the demangling_style_names array that corresponds to
586 the default demangling style. Remove FIXME note. Don't call
587 set_demangling_style.
588 * gdb-demangle.h (set_demangling_style): Remove declaration.
590 2013-03-13 Pedro Alves <palves@redhat.com>
592 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
594 (ada_make_symbol_completion_list): Make "text0" parameter const.
595 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
596 * breakpoint.c (condition_completer): Make "text" and "word"
597 parameters const. Adjust.
598 (check_tracepoint_command): Adjust to validate_actionline
600 (catch_syscall_completer): Make "text" and "word" parameters
602 * cli/cli-cmds.c (show_user): Make "comname" local const.
603 (valid_command_p): Make "command" parameter const.
604 (alias_command): Make "alias_prefix" and "command_prefix" locals
606 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
607 (add_alias_cmd): Make "name" and "oldname" parameters const.
608 Adjust. No longer make copy of OLDNAME.
609 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
610 (add_setshow_cmd_full, add_setshow_enum_cmd)
611 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
612 (add_setshow_filename_cmd, add_setshow_string_cmd)
613 (add_setshow_string_noescape_cmd)
614 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
615 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
616 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
617 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
618 Make "name" parameter const.
619 (help_cmd): Rename "command" parameter to "arg". New const local
621 (find_cmd): Make "command" parameter const.
622 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
623 deprecated_cmd_warning prototype change.
624 (undef_cmd_error): Make "cmdtype" parameter const.
625 (lookup_cmd): Make "line" parameter const.
626 (deprecated_cmd_warning): Change type of "text" parameter to
627 pointer to const char, from pointer to pointer to char. Adjust.
628 (lookup_cmd_composition): Make "text" parameter const.
629 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
631 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
633 * cli/cli-script.c (validate_comname): Make "tem" local const.
634 (define_command): New const local "tem_c". Use it in calls to
636 (document_command): Make "tem" and "comfull" locals const.
637 (show_user_1): Make "prefix" and "name" parameters const.
638 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
640 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
641 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
642 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
643 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
644 (complete_on_enum, add_setshow_enum_cmd)
645 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
646 (add_setshow_filename_cmd, add_setshow_string_cmd)
647 (add_setshow_string_noescape_cmd)
648 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
649 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
650 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
651 Change prototypes, constifying strings.
652 * completer.c (noop_completer, filename_completer): Make "text"
653 and "prefix" parameters const.
654 (location_completer, expression_completer)
655 (complete_line_internal): Make "text" and "prefix" parameters
657 (command_completer, signal_completer): Make "text" and "prefix"
659 * completer.h (noop_completer, filename_completer)
660 (expression_completer, location_completer, command_completer)
661 (signal_completer): Change prototypes.
662 * corefile.c (complete_set_gnutarget): Make "text" and "word"
664 * cp-abi.c (cp_abi_completer): Likewise.
665 * expression.h (parse_expression_for_completion): Change
667 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
669 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
670 * infrun.c (handle_completer): Make "text" and "word" parameters
672 * interps.c (interpreter_completer): Make "text" and "word"
674 * language.h (struct language_defn)
675 <la_make_symbol_completion_list>: Make "text" and "word"
677 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
678 (parse_exp_in_context): Rename to ...
679 (parse_exp_in_context_1): ... this.
680 (parse_exp_in_context): Reimplement, with const hack from
682 (parse_expression_for_completion): Make "string" parameter const.
683 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
684 to pointer to const char. Adjust.
685 (print_command_1): Make "exp" parameter const.
686 (output_command): Rename to ...
687 (output_command_const): ... this. Make "exp" parameter const.
688 (output_command): Reimplement.
690 (display_command): Rename "exp" parameter to "arg". New "exp"
691 local, const version of "arg".
692 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
693 "cmd_name" local const.
694 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
696 (cmdpy_completer): Make "text" and "word" parameters const.
697 (gdbpy_parse_command_name): Make "prefix_text2" local const.
698 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
700 * remote.c (_initialize_remote): Make "cmd_name" local const.
701 * symtab.c (language_search_unquoted_string): Make "text" and "p"
702 parameters const. Adjust.
703 (completion_list_add_fields): Make "sym_text", "text" and "word"
705 (struct add_name_data) <sym_text, text, word>: Make fields const.
706 (default_make_symbol_completion_list_break_on): Make "text" and
707 "word" parameters const. Adjust locals.
708 (default_make_symbol_completion_list)
709 (make_symbol_completion_list, make_symbol_completion_type)
710 (make_symbol_completion_list_fn): Make "text" and "word"
712 (make_file_symbol_completion_list): Make "text", "word" and
713 "srcfile" parameters const. Adjust locals.
714 (add_filename_to_list): Make "text" and "word" parameters const.
715 (struct add_partial_filename_data) <text, word>: Make fields
717 (make_source_files_completion_list): Make "text" and "word"
719 * symtab.h (default_make_symbol_completion_list_break_on)
720 (default_make_symbol_completion_list, make_symbol_completion_list)
721 (make_symbol_completion_type enum type_code)
722 (make_symbol_completion_list_fn make_file_symbol_completion_list)
723 (make_source_files_completion_list): Change prototype.
724 * top.c (execute_command): Adjust to pass pointer to pointer to
725 const char to lookup_cmd, and to deprecated_cmd_warning prototype
727 (set_verbose): Make "cmdname" local const.
728 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
730 (validate_actionline): Make "line" parameter a pointer to const
732 (encode_actions_1): Make "action_exp" local const, and adjust.
733 (encode_actions): Adjust.
734 (replace_comma): Delete.
735 (trace_dump_actions): Make "action_exp" and "next_comma" locals
736 const, and adjust. Don't frob the action string while splitting
737 it at commas. Instead, make a copy of each split substring in
739 (trace_dump_command): Adjust to validate_actionline prototype
741 * tracepoint.h (decode_agent_options, decode_agent_options)
742 (encode_actions, validate_actionline): Change prototypes.
743 * valprint.h (output_command): Delete declaration.
744 (output_command_const): Declare.
745 * value.c (function_destroyer): Cast const away in xfree call.
747 2013-03-13 Pedro Alves <palves@redhat.com>
749 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
750 rather than casting 'const char * const *' to 'const char **'.
751 * ada-lex.l (processInt): Make "trailer" local const. Remove
752 'const char **' cast.
753 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
754 locals, and use those as strtol output pointer, instead than doing
755 invalid casts to from 'const char **' to 'char **'.
756 (_initialize_demangle): Remove cast.
757 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
758 locals, and use those as strtol output pointer, instead than doing
759 invalid casts to from 'const char **' to 'char **'.
760 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
762 * stap-probe.c (stap_parse_register_operand)
763 (stap_parse_single_operand): Likewise.
765 2013-03-13 Yao Qi <yao@codesourcery.com>
767 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
768 the last matched 'V' blcok in trace frame.
770 2013-03-12 Joel Brobecker <brobecker@adacore.com>
772 * NEWS: Create a new section for the next release branch.
773 Rename the section of the current branch, now that it has
776 2013-03-12 Joel Brobecker <brobecker@adacore.com>
778 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
779 * version.in: Bump version to 7.6.50.20130312-cvs.
781 2013-03-12 Keith Seitz <keiths@redhat.com>
783 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
784 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
785 Remove temporary copy of input string.
786 (mi_execute_command_wrapper): Make "cmd" const.
787 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
788 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
790 (mi_parse): Make "cmd" const.
792 * mi/mi-parse.h (mi_parse): Make "cmd" const.
794 2013-03-12 Keith Seitz <keiths@redhat.com>
796 * ada-lang.c (ada_read_renaming_var_value): Pass const
797 pointer to expression string to parse_exp_1.
798 (create_excep_cond_exprs): Likewise.
799 * ax-gdb.c (agent_eval_command_one): Likewise.
800 (maint_agent_printf_command): Likewise.
801 Constify much of the string handling/parsing.
802 * breakpoint.c (set_breakpoint_condition): Pass const
803 pointer to expression string to parse_exp_1.
804 (update_watchpoint): Likewise.
805 (parse_cmd_to_aexpr): Constify string handling.
806 Pass const pointer to parse_exp_1.
807 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
808 (find_condition_and_thread): Likewise.
810 (watch_command_1): Make "arg" const.
811 Constify string handling.
812 Copy the expression string instead of changing the input
814 (update_breakpoint_location): Pass const pointer to
816 * eval.c (parse_and_eval_address): Make "exp" const.
817 (parse_to_comma_and_eval): Make "expp" const.
818 (parse_and_eval): Make "exp" const.
819 * expression.h (parse_expression): Make argument const.
820 (parse_exp_1): Make first argument const.
821 * findcmd.c (parse_find_args): Treat "args" as const.
822 * linespec.c (parse_linespec): Pass const pointer to
823 linespec_expression_to_pc.
824 (linespec_expression_to_pc): Make "exp_ptr" const.
825 * parse.c (parse_exp_1): Make "stringptr" const.
826 Make a copy of the expression to pass to parse_exp_in_context until
827 this whole interface can be constified.
828 (parse_expression): Make "string" const.
829 * printcmd.c (ui_printf): Treat "arg" as const.
830 Handle const strings.
831 * tracepoint.c (validate_actionline): Pass const pointer to
832 all calls to parse_exp_1.
833 (encode_actions_1): Likewise.
834 * value.h (parse_to_comma_and_eval): Make argument const.
835 (parse_and_eval_address): Likewise.
836 (parse_and_eval): Likewise.
837 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
838 (varobj_set_value): Likewise.
839 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
840 constify string handling.
841 Pass const pointers to parse_and_eval_address and
842 parse_to_comman_and_eval.
843 * cli/cli-utils.c (skip_to_space): Rename to ...
844 (skip_to_space_const): ... this. Handle const strings.
845 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
847 (skip_to_space_const): Declare.
848 * common/format.c (parse_format_string): Make "arg" const.
849 Handle const strings.
850 * common/format.h (parse_format_string): Make "arg" const.
851 * gdbserver/ax.c (ax_printf): Make "format" const.
852 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
853 of the expression string.
855 2013-03-12 Hui Zhu <hui@codesourcery.com>
857 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
859 2013-03-12 Yao Qi <yao@codesourcery.com>
860 Hui Zhu <hui@codesourcery.com>
862 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
863 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
866 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
868 * ada-lex.l (rules): Only recognize 'thread' as a
869 delimiter when followed by numerals, as for c-exp.y.
870 Use new rewind_to_char function to rewind the input for
871 expression-delimiting tokens.
872 (rewind_to_char): New function.
874 2013-03-11 Pedro Alves <palves@redhat.com>
875 Jan Kratochvil <jan.kratochvil@redhat.com>
877 * configure: Regenerate.
878 * configure.ac (check dynamic export flag): Link python test with
881 2013-03-11 Doug Evans <dje@google.com>
882 Keith Seitz <keiths@redhat.com>
884 * linespec.c (find_linespec_symbols): Call find_function_symbols
885 first, and then call lookup_prefix_sym/find_method.
887 2013-03-11 Pedro Alves <palves@redhat.com>
889 * charset.c (convert_between_encodings): Don't cast between
890 different pointer to pointer types. Instead, make the 'inp' local
891 be of the type iconv expects.
892 (wchar_iterate): Don't cast between different pointer to pointer
893 types. Instead, use new pointer local of the type iconv expects.
894 * target.c (target_read_stralloc, target_fileio_read_stralloc):
895 Add new local of type char pointer, and use it to get a
896 char/string view of the byte buffer, instead of casting between
897 pointer to pointer types.
899 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
901 * remote.c (remote_set_trace_buffer_size): Move != operator
902 to the start of next line to fix an ARI warning.
904 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
906 * NEWS: Add record changes.
908 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
910 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
911 the instruction history disassembly.
912 * disasm.c (dump_insns): Omit the pc prefix, if requested.
913 * disasm.h (DISASSEMBLY_OMIT_PC): New.
915 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
917 * Makefile.in (SFILES): Add record-btrace.c
918 (COMMON_OBS): Add record-btrace.o
919 * record-btrace.c: New.
920 * objfiles.c: Include btrace.h.
921 (free_objfile): call btrace_free_objfile.
923 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
925 * target.c (target_call_history, target_call_history_from,
926 target_call_history_range): New.
927 * target.h (target_ops) <to_call_history, to_call_history_from,
928 to_call_history_range>: New fields.
929 (target_call_history, target_call_history_from,
930 target_call_history_range): New declaration.
931 * record.c (get_call_history_modifiers, cmd_record_call_history,
932 record_call_history_size): New.
933 (_initialize_record): Add the "record function-call-history" command.
934 Add "set/show record function-call-history-size" commands.
935 * record.h (record_print_flag): New.
937 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
939 * target.h (target_ops) <to_insn_history, to_insn_history_from,
940 to_insn_history_range>: New fields.
941 (target_insn_history): New.
942 (target_insn_history_from): New.
943 (target_insn_history_range): New.
944 * target.c (target_insn_history): New.
945 (target_insn_history_from): New.
946 (target_insn_history_range): New.
947 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
948 (record_insn_history_size): New.
949 (get_insn_number): New.
950 (get_context_size): New.
952 (get_insn_history_modifiers): New.
953 (cmd_record_insn_history): New.
954 (_initialize_record): Add "set/show record instruction-history-size"
955 command. Add "record instruction-history" command.
957 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
959 * record.h (record_disconnect): New.
960 (record_detach): New.
961 (record_mourn_inferior): New.
963 * record-full.c (record_disconnect, record_detach,
964 record_mourn_inferior, record_kill): Move to...
968 (record_unpush): New.
969 (cmd_record_stop): Call record_stop. Replace unpush_target
970 call with record_unpush call.
971 (record_disconnect, record_detach): Assert that the target
972 is of record stratum. Call record_unpush, record_stop, and
974 (record_mourn_inferior, record_kill): Assert that the target
975 is of record stratum. Call record_unpush and DEBUG.
977 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
979 * record-full.h, record-full.c (record_memory_query): Rename
981 (record_full_memory_query): ...this. Update all users.
982 (record_arch_list_add_reg): Rename to ...
983 (record_full_arch_list_add_reg): ...this. Update all users.
984 (record_arch_list_add_mem): Rename to ...
985 (record_full_arch_list_add_mem): ...this. Update all users.
986 (record_arch_list_add_end): Rename to ...
987 (record_full_arch_list_add_end): ...this. Update all users.
988 (record_gdb_operation_disable_set): Rename to ...
989 (record_full_gdb_operation_disable_set): ...this.
992 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
994 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
995 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
996 (RECORD_IS_REPLAY): Renamed to ...
997 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
998 (RECORD_FILE_MAGIC): Renamed to ...
999 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
1000 (record_mem_entry): Renamed to ...
1001 (record_full_mem_entry): ... this. Updated all users.
1002 (record_reg_entry): Renamed to ...
1003 (record_full_reg_entry): ... this. Updated all users.
1004 (record_end_entry): Renamed to ...
1005 (record_full_end_entry): ... this. Updated all users.
1006 (record_type) <record_end, record_reg, record_mem>: Renamed
1008 (record_full_type) <record_full_end, record_full_reg,
1009 record_full_mem>: ... this. Updated all users.
1010 (record_entry): Renamed to ...
1011 (record_full_entry): ... this. Updated all users.
1012 (record_core_buf_entry): Renamed to ...
1013 (record_full_core_buf_entry): ... this. Updated all users.
1014 (record_core_regbuf): Renamed to ...
1015 (record_full_core_regbuf): ... this. Updated all users.
1016 (record_core_start): Renamed to ...
1017 (record_full_core_start): ... this. Updated all users.
1018 (record_core_end): Renamed to ...
1019 (record_full_core_end): ... this. Updated all users.
1020 (record_core_buf_list): Renamed to ...
1021 (record_full_core_buf_list): ... this. Updated all users.
1022 (record_first): Renamed to ...
1023 (record_full_first): ... this. Updated all users.
1024 (record_list): Renamed to ...
1025 (record_full_list): ... this. Updated all users.
1026 (record_arch_list_head): Renamed to ...
1027 (record_full_arch_list_head): ... this. Updated all users.
1028 (record_arch_list_tail): Renamed to ...
1029 (record_full_arch_list_tail): ... this. Updated all users.
1030 (record_stop_at_limit): Renamed to ...
1031 (record_full_stop_at_limit): ... this. Updated all users.
1032 (record_insn_max_num): Renamed to ...
1033 (record_full_insn_max_num): ... this. Updated all users.
1034 (record_insn_num): Renamed to ...
1035 (record_full_insn_num): ... this. Updated all users.
1036 (record_insn_count): Renamed to ...
1037 (record_full_insn_count): ... this. Updated all users.
1038 (record_ops): Renamed to ...
1039 (record_full_ops): ... this. Updated all users.
1040 (record_core_ops): Renamed to ...
1041 (record_full_core_ops): ... this. Updated all users.
1042 (set_record_cmdlist): Renamed to ...
1043 (set_record_full_cmdlist): ... this. Updated all users.
1044 (show_record_cmdlist): Renamed to ...
1045 (show_record_full_cmdlist): ... this. Updated all users.
1046 (record_cmdlist): Renamed to ...
1047 (record_full_cmdlist): ... this. Updated all users.
1048 (record_beneath_to_resume_ops): Renamed to ...
1049 (record_full_beneath_to_resume_ops): ... this. Updated all users.
1050 (record_beneath_to_resume): Renamed to ...
1051 (record_full_beneath_to_resume): ... this. Updated all users.
1052 (record_beneath_to_wait_ops): Renamed to ...
1053 (record_full_beneath_to_wait_ops): ... this. Updated all users.
1054 (record_beneath_to_wait): Renamed to ...
1055 (record_full_beneath_to_wait): ... this. Updated all users.
1056 (record_beneath_to_store_registers_ops): Renamed to ...
1057 (record_full_beneath_to_store_registers_ops): ... this.
1059 (record_beneath_to_store_registers): Renamed to ...
1060 (record_full_beneath_to_store_registers): ... this.
1062 (record_beneath_to_xfer_partial_ops): Renamed to ...
1063 (record_full_beneath_to_xfer_partial_ops): ... this.
1065 (record_beneath_to_xfer_partial): Renamed to ...
1066 (record_full_beneath_to_xfer_partial): ... this.
1068 (record_beneath_to_insert_breakpoint): Renamed to ...
1069 (record_full_beneath_to_insert_breakpoint): ... this.
1071 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
1072 (record_full_beneath_to_stopped_by_watchpoint): ... this.
1074 (record_beneath_to_stopped_data_address): Renamed to ...
1075 (record_full_beneath_to_stopped_data_address): ... this.
1077 (record_beneath_to_async): Renamed to ...
1078 (record_full_beneath_to_async): ... this. Updated all users.
1079 (record_goto_insn): Renamed to ...
1080 (record_full_goto_insn): ... this. Updated all users.
1081 (record_save): Renamed to ...
1082 (record_full_save): ... this. Updated all users.
1083 (record_reg_alloc): Renamed to ...
1084 (record_full_reg_alloc): ... this. Updated all users.
1085 (record_reg_release): Renamed to ...
1086 (record_full_reg_release): ... this. Updated all users.
1087 (record_mem_alloc): Renamed to ...
1088 (record_full_mem_alloc): ... this. Updated all users.
1089 (record_mem_release): Renamed to ...
1090 (record_full_mem_release): ... this. Updated all users.
1091 (record_end_alloc): Renamed to ...
1092 (record_full_end_alloc): ... this. Updated all users.
1093 (record_end_release): Renamed to ...
1094 (record_full_end_release): ... this. Updated all users.
1095 (record_entry_release): Renamed to ...
1096 (record_full_entry_release): ... this. Updated all users.
1097 (record_list_release): Renamed to ...
1098 (record_full_list_release): ... this. Updated all users.
1099 (record_list_release_following): Renamed to ...
1100 (record_full_list_release_following): ... this.
1102 (record_list_release_first): Renamed to ...
1103 (record_full_list_release_first): ... this. Updated all users.
1104 (record_arch_list_add): Renamed to ...
1105 (record_full_arch_list_add): ... this. Updated all users.
1106 (record_get_loc): Renamed to ...
1107 (record_full_get_loc): ... this. Updated all users.
1108 (record_check_insn_num): Renamed to ...
1109 (record_full_check_insn_num): ... this. Updated all users.
1110 (record_arch_list_cleanups): Renamed to ...
1111 (record_full_arch_list_cleanups): ... this. Updated all users.
1112 (record_message): Renamed to ...
1113 (record_full_message): ... this. Updated all users.
1114 (record_message_wrapper): Renamed to ...
1115 (record_full_message_wrapper): ... this. Updated all users.
1116 (record_message_wrapper_safe): Renamed to ...
1117 (record_full_message_wrapper_safe): ... this. Updated all users.
1118 (record_gdb_operation_disable): Renamed to ...
1119 (record_full_gdb_operation_disable): ... this. Updated all users.
1120 (record_hw_watchpoint): Renamed to ...
1121 (record_full_hw_watchpoint): ... this. Updated all users.
1122 (record_exec_insn): Renamed to ...
1123 (record_full_exec_insn): ... this. Updated all users.
1124 (record_restore): Renamed to ...
1125 (record_full_restore): ... this. Updated all users.
1126 (record_async_inferior_event_token): Renamed to ...
1127 (record_full_async_inferior_event_token): ... this.
1129 (record_async_inferior_event_handler): Renamed to ...
1130 (record_full_async_inferior_event_handler): ... this.
1132 (record_core_open_1): Renamed to ...
1133 (record_full_core_open_1): ... this. Updated all users.
1134 (record_open_1): Renamed to ...
1135 (record_full_open_1): ... this. Updated all users.
1136 (record_open): Renamed to ...
1137 (record_full_open): ... this. Updated all users.
1138 (record_close): Renamed to ...
1139 (record_full_close): ... this. Updated all users.
1140 (record_resume_step): Renamed to ...
1141 (record_full_resume_step): ... this. Updated all users.
1142 (record_resumed): Renamed to ...
1143 (record_full_resumed): ... this. Updated all users.
1144 (record_execution_dir): Renamed to ...
1145 (record_full_execution_dir): ... this. Updated all users.
1146 (record_resume): Renamed to ...
1147 (record_full_resume): ... this. Updated all users.
1148 (record_get_sig): Renamed to ...
1149 (record_full_get_sig): ... this. Updated all users.
1150 (record_sig_handler): Renamed to ...
1151 (record_full_sig_handler): ... this. Updated all users.
1152 (record_wait_cleanups): Renamed to ...
1153 (record_full_wait_cleanups): ... this. Updated all users.
1154 (record_wait_1): Renamed to ...
1155 (record_full_wait_1): ... this. Updated all users.
1156 (record_wait): Renamed to ...
1157 (record_full_wait): ... this. Updated all users.
1158 (record_stopped_by_watchpoint): Renamed to ...
1159 (record_full_stopped_by_watchpoint): ... this. Updated all users.
1160 (record_disconnect): Renamed to ...
1161 (record_full_disconnect): ... this. Updated all users.
1162 (record_detach): Renamed to ...
1163 (record_full_detach): ... this. Updated all users.
1164 (record_mourn_inferior): Renamed to ...
1165 (record_full_mourn_inferior): ... this. Updated all users.
1166 (record_kill): Renamed to ...
1167 (record_full_kill): ... this. Updated all users.
1168 (record_stopped_data_address): Renamed to ...
1169 (record_full_stopped_data_address): ... this. Updated all users.
1170 (record_registers_change): Renamed to ...
1171 (record_full_registers_change): ... this. Updated all users.
1172 (record_store_registers): Renamed to ...
1173 (record_full_store_registers): ... this. Updated all users.
1174 (record_xfer_partial): Renamed to ...
1175 (record_full_xfer_partial): ... this. Updated all users.
1176 (record_breakpoint): Renamed to ...
1177 (record_full_breakpoint): ... this. Updated all users.
1178 (record_breakpoint_p): Renamed to ...
1179 (record_full_breakpoint_p): ... this. Updated all users.
1180 (record_breakpoints): Renamed to ...
1181 (record_full_breakpoints): ... this. Updated all users.
1182 (record_sync_record_breakpoints): Renamed to ...
1183 (record_full_sync_record_breakpoints): ... this.
1185 (record_init_record_breakpoints): Renamed to ...
1186 (record_full_init_record_breakpoints): ... this.
1188 (record_insert_breakpoint): Renamed to ...
1189 (record_full_insert_breakpoint): ... this. Updated all users.
1190 (record_remove_breakpoint): Renamed to ...
1191 (record_full_remove_breakpoint): ... this. Updated all users.
1192 (record_can_execute_reverse): Renamed to ...
1193 (record_full_can_execute_reverse): ... this. Updated all users.
1194 (record_get_bookmark): Renamed to ...
1195 (record_full_get_bookmark): ... this. Updated all users.
1196 (record_goto_bookmark): Renamed to ...
1197 (record_full_goto_bookmark): ... this. Updated all users.
1198 (record_async): Renamed to ...
1199 (record_full_async): ... this. Updated all users.
1200 (record_can_async_p): Renamed to ...
1201 (record_full_can_async_p): ... this. Updated all users.
1202 (record_is_async_p): Renamed to ...
1203 (record_full_is_async_p): ... this. Updated all users.
1204 (record_execution_direction): Renamed to ...
1205 (record_full_execution_direction): ... this. Updated all users.
1206 (record_info): Renamed to ...
1207 (record_full_info): ... this. Updated all users.
1208 (record_delete): Renamed to ...
1209 (record_full_delete): ... this. Updated all users.
1210 (record_is_replaying): Renamed to ...
1211 (record_full_is_replaying): ... this. Updated all users.
1212 (record_goto_entry): Renamed to ...
1213 (record_full_goto_entry): ... this. Updated all users.
1214 (record_goto_begin): Renamed to ...
1215 (record_full_goto_begin): ... this. Updated all users.
1216 (record_goto_end): Renamed to ...
1217 (record_full_goto_end): ... this. Updated all users.
1218 (record_goto): Renamed to ...
1219 (record_full_goto): ... this. Updated all users.
1220 (init_record_ops): Renamed to ...
1221 (init_record_full_ops): ... this. Updated all users.
1222 (record_core_resume): Renamed to ...
1223 (record_full_core_resume): ... this. Updated all users.
1224 (record_core_kill): Renamed to ...
1225 (record_full_core_kill): ... this. Updated all users.
1226 (record_core_fetch_registers): Renamed to ...
1227 (record_full_core_fetch_registers): ... this. Updated all users.
1228 (record_core_prepare_to_store): Renamed to ...
1229 (record_full_core_prepare_to_store): ... this. Updated all users.
1230 (record_core_store_registers): Renamed to ...
1231 (record_full_core_store_registers): ... this. Updated all users.
1232 (record_core_xfer_partial): Renamed to ...
1233 (record_full_core_xfer_partial): ... this. Updated all users.
1234 (record_core_insert_breakpoint): Renamed to ...
1235 (record_full_core_insert_breakpoint): ... this. Updated all users.
1236 (record_core_remove_breakpoint): Renamed to ...
1237 (record_full_core_remove_breakpoint): ... this. Updated all users.
1238 (record_core_has_execution): Renamed to ...
1239 (record_full_core_has_execution): ... this. Updated all users.
1240 (init_record_core_ops): Renamed to ...
1241 (init_record_full_core_ops): ... this. Updated all users.
1242 (cmd_record_restore): Renamed to ...
1243 (cmd_record_full_restore): ... this. Updated all users.
1244 (record_save_cleanups): Renamed to ...
1245 (record_full_save_cleanups): ... this. Updated all users.
1246 (cmd_record_start): Renamed to ...
1247 (cmd_record_full_start): ... this. Updated all users.
1248 (set_record_insn_max_num): Renamed to ...
1249 (set_record_full_insn_max_num): ... this. Updated all users.
1250 (set_record_command): Renamed to ...
1251 (set_record_full_command): ... this. Updated all users.
1252 (show_record_command): Renamed to ...
1253 (show_record_full_command): ... this. Updated all users.
1254 (_initialize_record): Renamed to ...
1255 (_initialize_record_full): ... this. Updated all users.
1257 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1259 * record.h: Split into this and ...
1260 * record-full.h: ... this.
1261 * record.c: Split into this and ...
1262 * record-full.c: ... this.
1263 * target.h (target_ops): Add new fields to_info_record,
1264 to_save_record, to_delete_record, to_record_is_replaying,
1265 to_goto_record_begin, to_goto_record_end, to_goto_record.
1266 (target_info_record): New.
1267 (target_save_record): New.
1268 (target_supports_delete_record): New.
1269 (target_delete_record): New.
1270 (target_record_is_replaying): New.
1271 (target_goto_record_begin): New.
1272 (target_goto_record_end): New.
1273 (target_goto_record): New.
1274 * target.c (target_info_record): New.
1275 (target_save_record): New.
1276 (target_supports_delete_record): New.
1277 (target_delete_record): New.
1278 (target_record_is_replaying): New.
1279 (target_goto_record_begin): New.
1280 (target_goto_record_end): New.
1281 (target_goto_record): New.
1282 * record.h: Declare struct cmd_list_element.
1283 (record_cmdlist): New declaration.
1284 (set_record_cmdlist): New declaration.
1285 (show_record_cmdlist): New declaration.
1286 (info_record_cmdlist): New declaration.
1287 (cmd_record_goto): New declaration.
1288 * record.c: Remove unnecessary includes.
1290 (cmd_record_goto): Remove declaration.
1291 (record_cmdlist): Now extern. Initialize.
1292 (set_record_cmdlist): Now extern. Initialize.
1293 (show_record_cmdlist): Now extern. Initialize.
1294 (info_record_cmdlist): Now extern. Initialize.
1295 (find_record_target): New.
1296 (require_record_target): New.
1297 (cmd_record_start): Update.
1298 (cmd_record_delete): Remove target-specific code.
1299 Call target_delete_record.
1300 (cmd_record_stop): Unpush any record target.
1301 (set_record_insn_max_num): Move to record-full.c
1302 (set_record_command): Add comment.
1303 (show_record_command): Add comment.
1304 (info_record_command): Update comment.
1305 Remove target-specific code.
1306 Call the record target's to_info_record.
1307 (cmd_record_start): New.
1308 (cmd_record_goto): Now extern.
1309 Remove target-specific code.
1310 Call target_goto_begin, target_goto_end, or target_goto.
1311 (_initialize_record): Move record target ops initialization to
1313 Change "record" command help text.
1314 Move "record restore", "record set", and "record show" commands to
1316 * Makefile.in (SFILES): Add record-full.c.
1317 (HFILES_NO_SRCDIR): Add record-full.h.
1318 (COMMON_OBS): Add record-full.o.
1319 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
1320 * arm-tdep.c: Include record-full.h.
1321 * i386-linux-tdep.c: Include record-full.h instead of record.h.
1322 * i386-tdep.c: Include record-full.h.
1323 * infrun.c: Include record-full.h.
1324 * linux-record.c: Include record-full.h.
1325 * moxie-tdep.c: Include record-full.h.
1326 * record-full.c: Include record-full.h.
1327 Change module comment.
1328 (set_record_full_cmdlist): New.
1329 (show_record_full_cmdlist): New.
1330 (record_full_cmdlist): New.
1331 (record_goto_insn): New declaration.
1332 (record_save): New declaration.
1333 (record_check_insn_num): Change query string.
1335 (record_delete): New.
1336 (record_is_replaying): New.
1337 (record_goto_entry): New.
1338 (record_goto_begin): New.
1339 (record_goto_end): New.
1341 (init_record_ops): Update.
1342 (init_record_core_ops): Update.
1343 (cmd_record_save): Rename to record_save. Remove target and arg checks.
1344 (cmd_record_start): New.
1345 (set_record_insn_max_num): Moved from record.c
1346 (set_record_full_command): New.
1347 (show_record_full_command): New.
1348 (_initialize_record_full): New.
1350 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1352 * target.h (add_deprecated_target_alias): New.
1353 * target.c (add_deprecated_target_alias): New.
1355 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1357 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
1359 (linux_supports_btrace): Add kernel and
1361 (kernel_supports_btrace): New function.
1362 (cpu_supports_btrace): New function.
1363 (intel_supports_btrace): New function.
1365 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1367 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
1368 * remote.c: Include btrace.h.
1369 (struct btrace_target_info): New struct.
1370 (remote_supports_btrace): New function.
1371 (send_Qbtrace): New function.
1372 (remote_enable_btrace): New function.
1373 (remote_disable_btrace): New function.
1374 (remote_teardown_btrace): New function.
1375 (remote_read_btrace): New function.
1376 (init_remote_ops): Add btrace ops.
1377 (enum <unnamed>): Add btrace packets.
1378 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
1379 (_initialize_remote): Add packet configuration for branch tracing.
1381 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1383 * features/btrace.dtd: New file.
1384 * Makefile.in (XMLFILES): Add btrace.dtd.
1385 * btrace.h (parse_xml_btrace): New declaration.
1386 * btrace.c: Include xml-support.h.
1387 (parse_xml_btrace): New function.
1388 (parse_xml_btrace_block): New function.
1389 (block_attributes): New struct.
1390 (btrace_attributes): New struct.
1391 (btrace_children): New struct.
1392 (btrace_elements): New struct.
1394 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1396 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
1397 (amd64_linux_enable_btrace): New.
1398 (amd64_linux_disable_btrace): New.
1399 (amd64_linux_teardown_btrace): New.
1400 (_initialize_amd64_linux_nat): Initialize btrace ops.
1401 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
1402 (i386_linux_enable_btrace): New.
1403 (i386_linux_disable_btrace): New.
1404 (i386_linux_teardown_btrace): New.
1405 (_initialize_i386_linux_nat): Initialize btrace ops.
1406 * config/i386/linux.mh: Add linux-btrace.o.
1407 * config/i386/linux64.mh: Add linux-btrace.o.
1409 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1411 * common/linux_btrace.h: New file.
1412 * common/linux_btrace.c: New file.
1413 * Makefile.in (SFILES): Add btrace.c.
1414 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
1415 (COMMON_OBS): Add btrace.o.
1416 (linux-btrace.o): New rule.
1418 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1420 * target.h: Include btrace.h.
1421 (struct target_ops) <to_supports_btrace, to_enable_btrace,
1422 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
1423 * target.c (target_supports_btrace): New function.
1424 (target_enable_btrace): New function.
1425 (target_disable_btrace): New function.
1426 (target_teardown_btrace): New function.
1427 (target_read_btrace): New function.
1428 * btrace.h: New file.
1429 * btrace.c: New file.
1430 * Makefile.in: Add btrace.c.
1431 * gdbthread.h: Include btrace.h.
1432 (struct thread_info): Add btrace field.
1433 * thread.c: Include btrace.h.
1434 (clear_thread_inferior_resources): Call target_teardown_btrace.
1435 * common/btrace-common.h: New file.
1437 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1439 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
1440 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
1441 kill_status to outer block.
1443 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1445 Fix entry-values if the callee called a noreturn function.
1446 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
1447 get_frame_address_in_block. Add new comment.
1449 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1451 Fix entry-values in C++ across CUs.
1452 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
1453 lookup_minimal_symbol. Add a comment.
1455 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
1458 2013-03-08 Yao Qi <yao@codesourcery.com>
1460 * tracepoint.c (_initialize_tracepoint): Indent the code.
1462 2013-03-08 Pedro Alves <palves@redhat.com>
1464 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
1465 (parse_find_args, find_command): Change type of pattern buffer
1466 locals to 'gdb_byte *'.
1468 2013-03-08 Stan Shebs <stan@codesourcery.com>
1469 Hafiz Abid Qadeer <abidh@codesourcery.com>
1471 * NEWS: Mention set and show trace-buffer-size commands.
1473 * target.h (struct target_ops): New method
1474 to_set_trace_buffer_size.
1475 (target_set_trace_buffer_size): New macro.
1476 * target.c (update_current_target): Set up new method.
1477 * tracepoint.c (trace_buffer_size): New global.
1478 (start_tracing): Send it to the target.
1479 (set_trace_buffer_size): New function.
1480 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
1481 * remote.c (remote_set_trace_buffer_size): New function.
1482 (_initialize_remote): Use it.
1483 (QTBuffer:size) New remote command.
1484 (PACKET_QTBuffer_size): New enum.
1485 (remote_protocol_features): Add an entry for
1486 PACKET_QTBuffer_size.
1488 2013-03-08 Tom Tromey <tromey@redhat.com>
1490 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
1493 2013-03-07 Pedro Alves <palves@redhat.com>
1495 * target.c (target_read_stralloc, target_fileio_read_alloc):
1496 *Cast pointer to 'gdb_byte *' in target call.
1498 2013-03-07 Pedro Alves <palves@redhat.com>
1500 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
1503 2013-03-07 Keith Seitz <keiths@redhat.com>
1505 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
1506 (trace_pass_command): Likewise.
1507 * cli/cli-cmds.c: Include cli/cli-utils.h.
1508 (source_command): Use skip-spaces.
1509 (disassemble_command): Likewise.
1510 * findcmd.c: Include cli/cli-utils.h.
1511 (parse_find_args): Use skip_spaces.
1512 * go32-nat.c: Include cli/cli-utils.h.
1513 (go32_sldt): Use skip_spaces.
1514 (go32_sgdt): Likewise.
1515 (go32_sidt): Likewise.
1516 (go32_pde): Likewise.
1517 (go32_pte): Likewise.
1518 (go32_pte_for_address): Likewise.
1519 * infcmd.c: Include cli/cli-utils.h.
1520 (registers_info): Use skip_spaces.
1521 * linux-tdep.c (read_mapping): Use skip_spaces_const.
1522 (linux_info_proc): Likewise.
1523 * linux-thread-db.c: Include cli/cli-utils.h.
1524 (info_auto_load_libthread_db): Use skip_spaces_const.
1525 * m32r-rom.c: Include cli/cli-utils.h.
1526 (m32r_upload_command): Use skip_spaces.
1527 * maint.c: Include cli/cli-utils.h.
1528 (maintenance_translate_address): Use skip_spaces.
1529 * mi/mi-parse.c: Include cli/cli-utils.h.
1530 (mi_parse_argv): Use skip_spaces.
1531 (mi_parse): Likewise.
1532 * minsyms.c: Include cli/cli-utils.h.
1533 (msymbol_hash_iw): Use skip_spaces_const.
1534 * objc-lang.c: Include cli/cli-utils.h.
1535 (parse_selector): Use skip_spaces.
1536 (parse_method): Likewise.
1537 * python/python.c: Include cli/cli-utils.h.
1538 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
1539 (python_command)[HAVE_PYTHON]: Likewise.
1540 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
1541 * remote-m32r-sdi.c: Include cli/cli-utils.h.
1542 (m32r_load): Use skip_spaces.
1543 * serial.c: Include cli/cli-utils.h.
1544 (serial_open): Use skip_spaces_const.
1545 * stack.c: Include cli/cli-utils.h.
1546 (parse_frame_specification_1): Use skip_spaces_const.
1547 * symfile.c: Include cli/cli-utils.h.
1548 (set_ext_lang_command): Use skip_spaces.
1549 * symtab.c: Include cli/cli-utils.h.
1550 (rbreak_command): Use skip_spaces.
1551 * thread.c (thread_name_command): Use skip_spaces.
1552 * tracepoint.c (validate_actionline): Use skip_spaces.
1553 (encode_actions_1): Likewise.
1554 (trace_find_range_command): Likewise.
1555 (trace_find_outside_command): Likewise.
1556 (trace_dump_actions): Likewise.
1558 2013-03-07 Pedro Alves <palves@redhat.com>
1560 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
1561 * expprint.c (print_subexp_standard): Likewise.
1562 * utils.c (host_char_to_target): Likewise.
1563 * valprint.c (generic_emit_char, generic_printstr): Likewise.
1564 * varobj.c (value_get_print_value): Change type of local to char*.
1565 Cast it gdb_byte * in call to language printer.
1567 2013-03-07 Pedro Alves <palves@redhat.com>
1569 * charset.c (struct wchar_iterator) <input>: Change type to 'const
1571 (make_wchar_iterator): Remove cast to char*.
1572 (wchar_iterate): Change type of local.
1574 2013-03-07 Pedro Alves <palves@redhat.com>
1576 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
1577 for 'regcache->register_status'.
1579 2013-03-07 Pedro Alves <palves@redhat.com>
1581 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
1584 2013-03-07 Pedro Alves <palves@redhat.com>
1586 * stap-probe.c (handle_stap_probe): Add cast to char*.
1588 2013-03-07 Pedro Alves <palves@redhat.com>
1590 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
1591 RECORD_MSGRCV>: Pass a signed variable to
1592 regcache_raw_read_signed, instead of an unsigned one.
1594 2013-03-07 Pedro Alves <palves@redhat.com>
1596 * remote-notif.c (notif_debug): Change type to int.
1597 * remote-notif.h (notif_debug): Likewise.
1599 2013-03-07 Pedro Alves <palves@redhat.com>
1601 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
1603 2013-03-07 Pedro Alves <palves@redhat.com>
1605 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
1606 * remote.h (hex2bin, bin2hex): ... here.
1607 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
1609 2013-03-07 Eli Zaretskii <eliz@gnu.org>
1611 * utils.c (initialize_utils): Improve doc strings of "set/show
1612 width", "set/show height", and "set/show pagination".
1614 2013-03-06 Keith Seitz <keiths@redhat.com>
1616 * ax-gdb.c (gen_printf): Make FORMAT const.
1617 * ax-gdb.h (gen_printf): Likewise.
1618 * ax-general.c (ax_string): Make STR const.
1619 * ax.h (ax_string): Likewise.
1621 2013-03-06 Doug Evans <dje@google.com>
1623 * elfread.c (elf_symfile_read): Move debugging printf to more
1626 2013-03-06 Pedro Alves <palves@redhat.com>
1628 * python/py-utils.c (target_string_to_unicode): Delete function.
1629 * python/python-internal.h (target_string_to_unicode): Delete
1632 2013-03-06 Pierre Muller <muller@sourceware.org>
1634 * linespec.c (get_current_search_block): ARI fix, use (void)
1635 for empty parameter list.
1637 2013-03-05 Doug Evans <dje@google.com>
1639 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
1640 of old ada_lookup_symbol_list. In !full_search case, don't
1642 (ada_lookup_symbol_list): Delete arg full_search, all callers
1643 updated. Call ada_lookup_symbol_list_worker.
1644 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
1645 * ada-lang.h (ada_lookup_symbol_list): Update.
1646 * language.h (language_defn): Update comment for
1647 la_iterate_over_symbols.
1648 * linespec.c (iterate_over_file_blocks): New function.
1649 (iterate_over_all_matching_symtabs): Call it.
1650 (lookup_prefix_sym): Ditto.
1651 (get_current_search_block): New function.
1652 (get_search_block): Delete.
1653 (find_label_symbols): Call get_current_search_block.
1654 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
1655 * symtab.c (iterate_over_symbols): Don't search superblocks.
1657 2013-03-05 Yao Qi <yao@codesourcery.com>
1659 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
1660 parameter VAR's type from "unsigned int" to "int".
1661 * command.h (var_zuinteger_unlimited): Update its comments.
1662 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
1664 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1666 * NEWS: Mention new target x86_64-*-cygwin*.
1668 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1670 * configure.host: Add x86_64-*-cygwin* as host.
1671 * configure.tgt: Add x86_64-*-cygwin* as target.
1672 * config/i386/cygwin64.mh: New file.
1674 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1676 * linespec.c (decode_line_2): Fix duplicate request off by two message.
1678 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1680 * linespec.c (struct linespec_canonical_name): New.
1681 (struct linespec_state): Change canonical_names type to it.
1682 (add_sal_to_sals): Change variable canonical_name to canonical. Change
1683 xrealloc element size. Initialize the different CANONICAL fields.
1684 (canonical_to_fullform): New.
1685 (filter_results): Use it. Add variables canonical, fullform and
1687 (struct decode_line_2_item, decode_line_2_compare_items): New.
1688 (decode_line_2): Remove variables iter and item_names, add variables
1689 items and items_count. Modify the code for these new variables.
1691 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
1693 * coff-pe-read.c (read_pe_exported_syms): Don't return without
1696 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
1698 * tracepoint.c (build_traceframe_info): Add code for byte order.
1700 2013-03-02 Kevin Buettner <kevinb@redhat.com>
1702 * v850-tdep.c: (v850e2_register_name): Revise system register
1703 names to match current V850E2M architecture specifications.
1704 Update register number enum comments too.
1706 2013-03-01 Jiong Wang <jiwang@tilera.com>
1707 Pedro Alves <palves@redhat.com>
1709 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
1711 (tilegx_skip_prologue): Limit prologue analysis to section end.
1713 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1715 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
1718 2013-03-01 Pedro Alves <palves@redhat.com>
1720 Use gdb_byte for bytes from the program being debugged.
1722 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
1723 Change type of local 'buf' to gdb_byte.
1724 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
1725 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
1726 * cris-tdep.c (cris_sigcontext_addr)
1727 (cris_sigtramp_frame_unwind_cache): Likewise.
1728 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
1729 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
1731 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
1732 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
1733 (hppa32_hpux_search_dummy_call_sequence)
1734 (hppa_hpux_supply_save_state): Likewise.
1735 * hppa-linux-tdep.c (insns_match_pattern)
1736 (hppa_linux_find_global_pointer): Likewise.
1737 * hppa-tdep.c (hppa_in_function_epilogue_p)
1738 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
1739 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
1740 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
1741 (i386fbsd_collect_uthread): Likewise.
1742 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
1743 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
1744 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
1745 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
1746 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
1747 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
1748 (ia64_libunwind_frame_prev_register)
1749 (ia64_libunwind_sigtramp_frame_this_id)
1750 (ia64_find_global_pointer_from_dynamic_section)
1751 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
1752 (ia64_unwind_pc): Likewise.
1753 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
1754 * m68hc11-tdep.c (m68hc11_push_dummy_call)
1755 (m68hc11_extract_return_value): Likewise.
1756 * m68klinux-nat.c (fetch_register, store_register): Likewise.
1757 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
1758 (mep_get_insn, mep_push_dummy_call): Likewise.
1759 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
1760 (mips_linux_in_dynsym_stub): Likewise.
1761 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
1762 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
1763 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
1765 * remote-mips.c (mips_set_register): Likewise.
1766 * remote-sim.c (gdbsim_fetch_register): Likewise.
1767 * score-tdep.c (score7_fetch_inst): Change type of parameter
1768 'memblock' and local 'buf' to gdb_byte.
1769 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
1770 Change type of local 'buf' to gdb_byte. Adjust.
1771 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
1773 (score7_analyze_prologue): Change type of 'memblock' and
1774 'memblock_ptr' locals to gdb_byte*.
1775 * sh64-tdep.c (sh64_extract_return_value)
1776 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
1777 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
1778 * solib-pa64.c (pa64_solib_create_inferior_hook)
1779 (pa64_open_symbol_file_object): Remove local 'buf'.
1780 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
1781 (som_open_symbol_file_object): Likewise.
1782 * solib-spu.c (spu_current_sos): Likewise.
1783 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
1784 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
1785 (spu_store_registers): Likewise.
1786 * target.c (debug_print_register): Likewise.
1787 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
1788 * xstormy16-tdep.c (xstormy16_store_return_value)
1789 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
1790 (xstormy16_find_jmp_table_entry): Likewise.
1792 2013-03-01 Jiong Wang <jiwang@tilera.com>
1794 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
1795 (tilegx_gdbarch_init): Install it.
1797 2013-02-28 Tom Tromey <tromey@redhat.com>
1799 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
1802 2013-02-28 Doug Evans <dje@google.com>
1804 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
1805 * python/python.c (gdbpy_find_pc_line): Ditto.
1807 2013-02-28 Tom Tromey <tromey@redhat.com>
1809 * contrib/excheck.py: New file.
1810 * contrib/exsummary.py: New file.
1811 * contrib/gcc-with-excheck: New file.
1813 2013-02-28 Tom Tromey <tromey@redhat.com>
1815 * python/python.c (gdbpy_print_stack): Call begin_line and
1816 fprintf_filtered inside TRY_CATCH.
1818 2013-02-28 Tom Tromey <tromey@redhat.com>
1820 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
1823 2013-02-28 Tom Tromey <tromey@redhat.com>
1825 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
1826 frame_object_to_frame_info inside TRY_CATCH.
1828 2013-02-28 Tom Tromey <tromey@redhat.com>
1830 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
1833 2013-02-28 Tom Tromey <tromey@redhat.com>
1835 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
1837 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
1839 * windows-nat.c: Throughout, fix format strings and casts of
1840 printf-like functions to avoid type related warnings on all
1842 (handle_output_debug_string): Fetch context information address
1843 from debug string using string_to_core_addr.
1845 2013-02-27 Jiong Wang <jiwang@tilera.com>
1847 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
1848 * regformats/reg-tilegx32.dat: New.
1850 2013-02-27 Jiong Wang <jiwang@tilera.com>
1852 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
1854 2013-02-27 Jiong Wang <jiwang@tilera.com>
1856 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
1858 2013-02-27 Yao Qi <yao@codesourcery.com>
1859 Pedro Alves <palves@redhat.com>
1861 * tracepoint.c (tfile_trace_find): For tfind
1862 pc/tp/range/outside, look for the next trace frame instead of
1863 always starting from frame 0.
1865 2013-02-26 Anthony Green <green@moxielogic.com>
1867 * configure.tgt: Add support for moxie-*-rtems* target.
1869 2013-02-25 Pedro Alves <palves@redhat.com>
1871 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
1874 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
1876 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
1877 if $fp is used as the virtual frame pointer.
1879 2013-02-23 Alan Modra <amodra@gmail.com>
1881 * elfread.c (elf_symtab_read): Do not use udata.p here to find
1883 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
1884 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
1885 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
1886 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
1888 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1891 * elfread.c (build_id_bfd_get): Make the return type const.
1892 (build_id_verify): Make the check parameter const.
1893 (build_id_to_debug_filename): Make the build_id parameter and variable
1895 (find_separate_debug_file_by_buildid): Make the variable build_id const.
1897 2013-02-21 Alan Modra <amodra@gmail.com>
1899 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
1901 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
1903 Add a new method 'disassemble' to gdb.Architecture class.
1904 * python/py-arch.c (archpy_disassmble): Implementation of the
1905 new method gdb.Architecture.disassemble.
1906 (arch_object_methods): Add entry for the new method.
1908 2013-02-20 Jiong Wang <jiwang@tilera.com>
1910 * MAINTAINERS (Write After Approval): Add myself to the list.
1912 2013-02-19 Pedro Alves <palves@redhat.com>
1914 Garbage collect 'struct monitor_ops'::load_routine.
1916 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
1917 * monitor.c (monitor_load): No longer call
1918 current_monitor->load_routine.
1919 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
1920 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
1921 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
1923 2013-02-19 Pedro Alves <palves@redhat.com>
1927 Harmonize with generic_load.
1929 * monitor.c: Include "readline/readline.h".
1930 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
1931 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
1932 long/strtol for the 'load_offset' local. Error out if no argument
1933 is given or if too many arguments are given. Tilde expand the
1934 passed in file name.
1936 2013-02-19 Kai Tietz <ktietz@redhat.com>
1939 * symfile.c (load_section_data): Change type of load_offset
1941 (generic_load): User strtoulst instead of strtoul for conversion
1944 2013-02-19 Jiong Wang <jiwang@tilera.com>
1946 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
1947 for return address, "lr" register, saved on stack.
1948 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
1949 after we invoke tilegx_analyze_prologue.
1951 2013-02-19 Jiong Wang <jiwang@tilera.com>
1953 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
1955 2013-02-19 Jiong Wang <jiwang@tilera.com>
1957 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
1959 2013-02-19 Jiong Wang <jiwang@tilera.com>
1961 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
1962 (tilegx_write_pc): New function.
1963 (tilegx_cannot_reference_register): Return zero if REGNO
1964 is TILEGX_FAULTNUM_REGNUM.
1965 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
1966 (tilegx_register_name): Add handling of "faultnum" register.
1967 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
1968 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
1969 handling of TILEGX_FAULTNUM_REGNUM.
1970 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
1972 2013-02-19 Jiong Wang <jiwang@tilera.com>
1974 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
1975 should be aligned to 64bit.
1977 2013-02-19 Kai Tietz <ktietz@redhat.com>
1979 * windows-nat.c (windows_xfer_memory): Fix debug-output
1982 2013-02-19 Lei Liu <lei.liu2@windriver.com>
1984 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
1985 Don't check DSP register number if HAVE_DSP is not set.
1987 2013-02-19 Alan Modra <amodra@gmail.com>
1989 * elfread.c (struct build_id): Delete. Use struct elf_build_id
1990 throughout file instead.
1991 (build_id_bfd_get): Update to use new elf_tdata build_id field.
1992 Don't xmalloc return value.
1993 (build_id_verify): Similarly. Don't xfree.
1994 (build_id_to_debug_filename): Update.
1995 (find_separate_debug_file_by_buildid): Update, don't xfree.
1997 2013-02-18 Tom Tromey <tromey@redhat.com>
2000 * dwarf2read.c (read_subrange_type): Use result of
2003 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
2005 * frame.c: Remove one extra white space after #include
2008 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2010 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
2012 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2014 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
2015 and dir commands into an if block.
2017 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
2019 * python/py-breakpoint (struct pybp_code): Use int instead of
2022 2013-02-15 Pedro Alves <pedro@codesourcery.com>
2023 Hafiz Abid Qadeer <abidh@codesourcery.com>
2025 * NEWS: Mention new field "trace-file".
2026 * tracepoint.c (trace_status_mi): Output "trace-file" field.
2027 (tfile_open): Record the trace file's filename in the trace
2029 (tfile_files_info): Mention the name of the trace file.
2030 Check the "filename" field explicitely.
2031 (trace_status_command): Explicitely check "filename" field.
2032 (trace_find_command): Ditto.
2033 (trace_find_pc_command): Ditto.
2034 (trace_find_tracepoint_command): Ditto.
2035 (trace_find_line_command): Ditto.
2036 (trace_find_range_command): Ditto.
2037 (trace_find_outside_command): Ditto.
2038 * tracepoint.h (struct trace_status) <from_file>: Rename it
2039 to "filename" and make it hold the trace file's filename
2040 instead of a boolean.
2041 * remote.c (remote_get_trace_status): Initialize "filename"
2042 field with NULL instead of 0.
2044 2013-02-15 Yao Qi <yao@codesourcery.com>
2046 * remote.c: Fix a typo.
2048 2013-02-14 Pierre Muller <muller@sourceware.org>
2050 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
2052 2013-02-14 Pedro Alves <palves@redhat.com>
2054 * utils.c (savestring): Don't #undef it. Move function to
2055 common/common-utils.c.
2056 * common/common-utils.c: Include gdb_string.h.
2057 (savestring): Move here from utils.c.
2058 * common/common-utils.h (savestring): Declare.
2060 2013-02-14 Pedro Alves <palves@redhat.com>
2062 * utils.c (savestring): Rename parameter 'size' to 'len'.
2064 2013-02-14 Pedro Alves <palves@redhat.com>
2065 Yufeng Zhang <yufeng.zhang@arm.com>
2067 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
2068 (aarch64_inferior_data, struct aarch64_inferior_data):
2070 (struct aarch64_process_info): New.
2071 (aarch64_process_list): New global.
2072 (aarch64_find_process_pid, aarch64_add_process)
2073 (aarch64_process_info_get): New functions.
2074 (aarch64_inferior_data_get): Delete.
2075 (aarch64_process_info_get): New function.
2076 (aarch64_forget_process): New function.
2077 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
2078 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
2079 aarch64_get_debug_reg_state.
2080 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
2081 instead of linux_nat_iterate_watchpoint_lwps.
2082 (aarch64_linux_new_fork): New function.
2083 (aarch64_linux_child_post_startup_inferior): Use
2084 aarch64_forget_process instead of aarch64_init_debug_reg_state.
2085 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
2086 (aarch64_linux_remove_hw_breakpoint)
2087 (aarch64_handle_aligned_watchpoint)
2088 (aarch64_handle_unaligned_watchpoint)
2089 (aarch64_linux_insert_watchpoint)
2090 (aarch64_linux_remove_watchpoint)
2091 (aarch64_linux_stopped_data_address): Adjust to pass the current
2092 process id to aarch64_debug_reg_state.
2093 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
2094 linux_nat_new_fork hook, and aarch64_forget_process as
2095 linux_nat_forget_process hook; remove the call to
2096 register_inferior_data_with_cleanup.
2098 2013-02-14 Pedro Alves <palves@redhat.com>
2100 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
2101 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
2104 2013-02-14 Pedro Alves <pedro@codesourcery.com>
2105 Hafiz Abid Qadeer <abidh@codesourcery.com>
2107 * tracepoint.h (validate_trace_state_variable_name): Declare.
2108 * tracepoint.c (validate_trace_state_variable_name): New.
2109 (trace_variable_command): Parse the trace state variable's name
2110 without using parse_expression. Do several validations.
2111 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
2112 trace state variable's name with parse_expression. Validate it.
2114 2013-02-14 Yao Qi <yao@codesourcery.com>
2116 * infcmd.c (breakpoint_proceeded): Remove it.
2118 2013-02-14 Yao Qi <yao@codesourcery.com>
2120 * tracepoint.c (end_actions_pseudocommand): Make it static.
2121 (while_stepping_pseudocommand): Likewise.
2122 * tracepoint.h (end_actions_pseudocommand): Remove the
2124 (while_stepping_pseudocommand): Likewise.
2126 2013-02-14 Yao Qi <yao@codesourcery.com>
2128 * cli/cli-decode.c (help_cmd): Remove the declaration of
2130 (help_all): Likewise.
2132 2013-02-13 Pedro Alves <palves@redhat.com>
2134 * amd64-linux-nat.c (update_debug_registers_callback):
2136 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
2138 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
2139 i386_debug_reg_state.
2140 (amd64_linux_new_fork): New function.
2141 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
2142 linux_nat_new_fork hook, and i386_forget_process as
2143 linux_nat_forget_process hook.
2144 * i386-linux-nat.c (update_debug_registers_callback):
2146 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
2148 (i386_linux_prepare_to_resume): Pass the lwp's pid to
2149 i386_debug_reg_state.
2150 (i386_linux_new_fork): New function.
2151 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
2152 linux_nat_new_fork hook, and i386_forget_process as
2153 linux_nat_forget_process hook.
2154 * i386-nat.c (i386_init_dregs): Delete.
2155 (i386_inferior_data, struct i386_inferior_data):
2157 (struct i386_process_info): New.
2158 (i386_process_list): New global.
2159 (i386_find_process_pid, i386_add_process, i386_process_info_get):
2161 (i386_inferior_data_get): Delete.
2162 (i386_process_info_get): New function.
2163 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
2164 (i386_forget_process): New function.
2165 (i386_cleanup_dregs): Rewrite.
2166 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
2167 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
2168 (i386_stopped_data_address, i386_insert_hw_breakpoint)
2169 (i386_remove_hw_breakpoint): Adjust to pass the current process id
2170 to i386_debug_reg_state.
2171 (i386_use_watchpoints): Don't register inferior data.
2172 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
2174 (i386_forget_process): Declare.
2175 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
2176 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
2178 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
2179 (add_initial_lwp): New, factored out from ...
2180 (add_lwp): ... this. Don't check the number of lwps before
2181 calling linux_nat_new_thread.
2182 (linux_nat_iterate_watchpoint_lwps): Delete.
2183 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
2184 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
2186 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
2188 (linux_nat_kill, linux_nat_mourn_inferior): Call
2189 linux_nat_forget_process.
2190 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2191 (linux_nat_forget_process): New functions.
2192 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
2194 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
2195 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
2197 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2198 (linux_nat_forget_process): New declarations.
2200 * amd64fbsd-nat.c (super_mourn_inferior): New global.
2201 (amd64fbsd_mourn_inferior): New function.
2202 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
2203 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
2205 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2207 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
2210 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2212 * aarch64-linux-nat.c (debug_reg_change_callback)
2213 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
2216 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2218 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
2221 2013-02-13 Pedro Alves <palves@redhat.com>
2222 Hafiz Abid Qadeer <abidh@codesourcery.com>
2224 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
2226 2013-02-12 Tom Tromey <tromey@redhat.com>
2229 * c-exp.y (lex_one_token): Initialize other fields of yylval on
2231 (classify_inner_name): Remove 'first_name' argument, add
2232 'context'. Remove unused variable.
2233 (yylex): Explicitly maintain the context type. Exit loop earlier
2234 if NAME result is seen.
2236 2013-02-12 Pedro Alves <palves@redhat.com>
2238 * amd64-darwin-tdep.c: Add (C) after Copyright.
2239 * cli/cli-cmds.h: Ditto.
2240 * cli/cli-decode.c: Ditto.
2241 * cli/cli-decode.h: Ditto.
2242 * cli/cli-dump.c: Ditto.
2243 * cli/cli-dump.h: Ditto.
2244 * cli/cli-interp.c: Ditto.
2245 * cli/cli-logging.c: Ditto.
2246 * cli/cli-script.c: Ditto.
2247 * cli/cli-script.h: Ditto.
2248 * cli/cli-setshow.c: Ditto.
2249 * cli/cli-setshow.h: Ditto.
2250 * cli/cli-utils.c: Ditto.
2251 * cli/cli-utils.h: Ditto.
2252 * config/alpha/nm-osf3.h: Ditto.
2253 * config/djgpp/djconfig.sh: Ditto.
2254 * config/i386/nm-fbsd.h: Ditto.
2255 * config/i386/nm-i386gnu.h: Ditto.
2256 * config/nm-linux.h: Ditto.
2257 * config/nm-nto.h: Ditto.
2258 * config/rs6000/nm-rs6000.h: Ditto.
2259 * config/sparc/nm-sol2.h: Ditto.
2260 * darwin-nat-info.c: Ditto.
2263 * gdb-demangle.h: Ditto.
2264 * i386-darwin-nat.c: Ditto.
2265 * i386-darwin-tdep.c: Ditto.
2266 * linux-fork.h: Ditto.
2267 * m32c-tdep.c: Ditto.
2268 * microblaze-linux-tdep.c: Ditto.
2269 * microblaze-rom.c: Ditto.
2270 * microblaze-tdep.c: Ditto.
2271 * microblaze-tdep.h: Ditto.
2272 * mips-linux-tdep.h: Ditto.
2273 * ppc-ravenscar-thread.c: Ditto.
2274 * ppc-ravenscar-thread.h: Ditto.
2275 * prologue-value.c: Ditto.
2276 * prologue-value.h: Ditto.
2277 * ravenscar-thread.c: Ditto.
2278 * ravenscar-thread.h: Ditto.
2279 * sparc-ravenscar-thread.c: Ditto.
2280 * sparc-ravenscar-thread.h: Ditto.
2281 * tilegx-linux-tdep.c: Ditto.
2282 * unwind_stop_reasons.def: Ditto.
2283 * windows-nat.h: Ditto.
2284 * xtensa-linux-tdep.c: Ditto.
2285 * xtensa-xtregs.c: Ditto.
2286 * regformats/regdat.sh: Ditto.
2287 * regformats/regdef.h: Ditto.
2289 2013-02-12 Pedro Alves <palves@redhat.com>
2291 * break-catch-sig.c: Update copyright years.
2293 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
2295 Add support for a destructor for ui_out data and use it to
2296 provide a ui_out destructor.
2297 * ui-out.h: Declare the new ui_out destructor.
2298 (ui_out_impl): Add a field for data destructor in ui_out_impl.
2299 * ui-out.c (default_data_destroy): Add a default data destructor
2301 (default_ui_out_impl): Set the new data_destroy field to
2302 default_data_destroy
2303 (uo_data_destroy): Local function which invokes the data
2304 destructor if present.
2305 (clear_table): Local function which clears the table data of a
2307 (ui_out_destroy): Public function which frees a ui_out object.
2308 (ui_out_table_end): Use the new clear_table function.
2309 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
2311 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
2314 2013-02-11 Doug Evans <dje@google.com>
2316 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
2317 (printf_decfloat): New function. Broken out from ui_printf.
2318 Remove unnecessary code to shift the entire format string down.
2319 (printf_pointer): New function.
2320 (ui_printf): Code to print C strings, wide C strings, decfloats,
2321 and pointers moved to separate functions.
2323 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
2325 * valops.c (value_assign): Handling bitfield offset in
2326 `lval_internalvar_component' case.
2328 2013-02-08 Doug Evans <dje@google.com>
2330 * common/format.c (parse_format_string): Fix whitespace.
2332 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
2334 * stack.c (return_command): Work around uninitialized variable
2337 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
2339 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
2340 number of the registers from 36 to 34.
2342 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2344 * NEWS: Mention new AArch64 native and target support.
2346 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2348 * MAINTAINERS (Write After Approval): Add myself.
2350 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
2351 Marcus Shawcroft <marcus.shawcroft@arm.com>
2352 Nigel Stephens <nigel.stephens@arm.com>
2353 Yufeng Zhang <yufeng.zhang@arm.com>
2355 * aarch64-linux-nat.c: New file.
2356 * config/aarch64/linux.mh: New file.
2357 * configure.host: Add AArch64.
2358 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
2360 2013-02-07 Doug Evans <dje@google.com>
2362 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
2363 disassemble command.
2365 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
2367 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
2368 set_gdbarch_fetch_tls_load_module_address.
2370 2013-02-06 David S. Miller <davem@davemloft.net>
2372 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
2373 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2374 * value.c (struct_return_convention): New function.
2375 (using_struct_return): Implement in terms of struct_return_convention.
2376 * value.h (struct_return_convention): Declare.
2377 * stack.c (return_command): Allow successful overriding of the return
2378 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2380 2013-02-06 Tom Tromey <tromey@redhat.com>
2382 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
2383 outside of TRY_CATCH.
2385 2013-02-06 Yao Qi <yao@codesourcery.com>
2387 * mi/mi-interp.c: Include "tracepoint.h".
2388 (mi_tsv_modified): Declare.
2389 (mi_tsv_created, mi_tsv_deleted): Update declaration.
2390 (mi_interpreter_init): Call observer_attach_tsv_modified.
2391 (mi_tsv_modified): New.
2392 (mi_tsv_created, mi_tsv_deleted): Update.
2393 * tracepoint.c (trace_variable_command): Call
2394 observer_notify_tsv_modified if the initial value of tsv is
2396 (delete_trace_state_variable): Call
2397 observer_notify_tsv_deleted earlier.
2398 (trace_variable_command): Caller update.
2399 (create_tsv_from_upload): Likewise.
2400 * observer.sh: Declare "struct trace_state_variable".
2402 * NEWS: Mention the new MI notification "=tsv-modified".
2404 2013-02-05 Doug Evans <dje@google.com>
2406 * completer.c (location_completer): Fix typo in comment.
2408 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
2410 * breakpoint.c (add_location_to_breakpoint): Insert the location with
2413 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
2415 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
2416 Refactor if statement to avoid trailing || operator.
2418 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
2420 * NEWS: Add PowerPC FreeBSD as a new native configuration.
2422 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
2424 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
2425 * configure.host: Add powerpc*-*-freebsd* target.
2426 * configure.tgt: Add target info for powerpc*-*-freebsd*.
2427 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
2428 * config/powerpc/fbsd.mh: New file.
2430 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
2431 Denys Vlasenko <dvlasenk@redhat.com>
2432 Pedro Alves <palves@redhat.com>
2434 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
2435 (struct elf_internal_linux_prpsinfo): Forward declare.
2436 * gdbarch.h, gdbarch.c: Regenerate.
2437 * linux-tdep.c: Include `cli/cli-utils.h'.
2438 (linux_fill_prpsinfo): New function.
2439 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
2440 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
2441 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
2442 depending on gdbarch pointer bitness.
2443 * ppc-linux-tdep.c: Include elf-bfd.h.
2444 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
2447 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2448 Marcus Shawcroft <marcus.shawcroft@arm.com>
2449 Nigel Stephens <nigel.stephens@arm.com>
2450 Yufeng Zhang <yufeng.zhang@arm.com>
2452 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
2454 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2455 Marcus Shawcroft <marcus.shawcroft@arm.com>
2456 Nigel Stephens <nigel.stephens@arm.com>
2457 Yufeng Zhang <yufeng.zhang@arm.com>
2459 * aarch64-newlib-tdep.c: New file.
2460 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
2462 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
2463 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
2464 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
2465 * osabi.c (gdb_osabi_names): Add "Newlib".
2467 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2468 Marcus Shawcroft <marcus.shawcroft@arm.com>
2469 Nigel Stephens <nigel.stephens@arm.com>
2470 Yufeng Zhang <yufeng.zhang@arm.com>
2472 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
2473 (ALLDEPFILES): Add aarch64-linux-tdep.c.
2474 * aarch64-linux-tdep.c: New file.
2475 * aarch64-linux-tdep.h: New file.
2476 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
2477 * configure.tgt: Add aarch64-none-linux-gnu.
2479 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2480 Marcus Shawcroft <marcus.shawcroft@arm.com>
2481 Nigel Stephens <nigel.stephens@arm.com>
2482 Yufeng Zhang <yufeng.zhang@arm.com>
2484 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
2485 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
2486 (ALLDEPFILES): Add aarch64-tdep.c.
2487 * aarch64-tdep.c: New file.
2488 * aarch64-tdep.h: New file.
2489 * configure.tgt: Add AArch64.
2490 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
2491 (aarch64-expedite): New definition.
2492 * features/aarch64-core.xml: New file.
2493 * features/aarch64-fpu.xml: New file.
2494 * features/aarch64-without-fpu.c: New file (generated).
2495 * features/aarch64-without-fpu.xml: New file.
2496 * features/aarch64.c: New file (generated).
2497 * features/aarch64.xml: New file.
2498 * regformats/aarch64-without-fpu.dat: New file (generated).
2499 * regformats/aarch64.dat: New file (generated).
2501 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2503 * contrib/expect-read1.c: New file.
2504 * contrib/expect-read1.sh: New file.
2506 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2508 * dwarf2read.c (file_file_name): New function with code from
2510 (file_full_name): Move most of the code to file_file_name.
2511 (macro_start_file): Rename variable full_name to file_name and use
2512 file_file_name for it. Add comp_dir parameter to new_macro_table.
2513 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
2514 macro_source_file->filename access by macro_source_fullname call.
2515 * macroscope.c (_initialize_macroscope): Update the new_macro_table
2517 * macrotab.c (struct macro_table): New field comp_dir.
2518 (macro_include): New variables link_fullname and source_fullname.
2519 Replace any macro_source_file->filename access by macro_source_fullname
2521 (macro_lookup_inclusion): Remove the partial filenames checking code.
2522 (check_for_redefinition): New variables source_fullname and
2523 found_key_fullname. Replace any macro_source_file->filename access by
2524 macro_source_fullname call.
2525 (macro_undef): New variables source_fullname and key_fullname. Replace
2526 any macro_source_file->filename access by macro_source_fullname call.
2527 (macro_lookup_definition): New variables retval and source_fullname.
2528 Replace any macro_source_file->filename access by macro_source_fullname
2530 (foreach_macro): New variable key_fullname. Replace any
2531 macro_source_file->filename access by macro_source_fullname call.
2532 (foreach_macro_in_scope): New variable datum_fullname. Replace any
2533 macro_source_file->filename access by macro_source_fullname call.
2534 (new_macro_table): Add parameter comp_dir. Initialize T with it.
2535 (macro_source_fullname): New function.
2536 * macrotab.h (struct macro_source_file): Extent the filename field
2538 (new_macro_table): New parameter comp_dir, add a comment for it.
2539 (macro_source_fullname): new declaration.
2541 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2543 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
2544 this_real_name to outer block. Use it also for
2545 compare_filenames_for_search.
2546 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
2547 with dw2_get_real_path for file_matcher, considering also
2548 BASENAMES_MAY_DIFFER.
2549 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
2551 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2553 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
2554 to the file_matcher parameter. Pass 0 to it.
2555 (dwarf2_create_include_psymtab): Copy also DIRNAME.
2556 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
2557 NULL psymtab_to_fullname result.
2558 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
2559 an expected filename instead.
2560 (expand_symtabs_matching_via_partial): Add basenames parameter to the
2561 file_matcher parameter. Call also psymtab_to_fullname, after newly
2562 considering BASENAMES_MAY_DIFFER.
2563 * source.c (rewrite_source_path): Remove static.
2564 * source.h (rewrite_source_path): New declaration.
2565 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
2566 the expand_symtabs_matching field. Comment it.
2567 * symtab.c (file_matches): New function comment. Add parameter
2568 basenames, implement it.
2569 (search_symbols_file_matches): Add basenames parameter. Update the
2570 file_matches caller.
2571 (search_symbols): Match FILES also against symtab_to_fullname.
2572 Optimize it for BASENAMES_MAY_DIFFER.
2574 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2576 * source.c (print_source_lines_base): Print for TUI also "fullname".
2577 * tui/tui-data.c (init_content_element): Change tui_locator_element
2579 * tui/tui-data.h (struct tui_locator_element): Likewise.
2580 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
2581 tui_update_locator_filename calls to tui_update_locator_fullname.
2582 Replace symtab->filename refererence by symtab_to_fullname call.
2583 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
2584 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
2585 field to full_name. Replace symtab->filename refererence by
2586 symtab_to_fullname call.
2587 (tui_show_symtab_source): Rename parameter to fullname. Change
2588 tui_locator_element field to full_name.
2589 * tui/tui-stack.c: Include source.h.
2590 (tui_set_locator_filename): Rename the declaration to ...
2591 (tui_set_locator_fullname): ... here. Rename its parameter to
2592 fullname, updates its comment.
2593 (tui_set_locator_info): Rename its parameter to fullname.
2594 (tui_set_locator_filename): Rename the definition to ...
2595 (tui_set_locator_fullname): ... here. Rename its parameter to
2596 fullname, updates its comment. Change tui_locator_element field to
2598 (tui_set_locator_info): Rename its parameter to fullname.
2599 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
2600 (tui_update_locator_filename): Rename to ...
2601 (tui_update_locator_fullname): ... here. Rename callee to
2602 tui_set_locator_fullname.
2603 (tui_show_frame_info): Replace symtab->filename refererence by
2604 symtab_to_fullname call.
2605 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
2606 (tui_update_locator_fullname): ... here.
2607 * tui/tui-winsource.c (tui_display_main): Rename the callee to
2608 tui_update_locator_fullname. Replace symtab->filename refererence by
2609 symtab_to_fullname call.
2610 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
2611 Rename the callee to tui_update_locator_fullname.
2612 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
2614 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2616 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
2617 by symtab_to_filename_for_display calls.
2618 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
2619 (clear_command): New variable sal_fullname, initialize it. Replace
2620 compare_filenames_for_search by filename_cmp with sal_fullname.
2621 (say_where, update_static_tracepoint): Replace symtab->filename
2622 refererences by symtab_to_filename_for_display calls.
2623 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
2625 * dwarf2read.c: Include source.h.
2626 (fixup_go_packaging): Replace symtab->filename refererences by
2627 symtab_to_filename_for_display calls.
2628 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
2629 Replace symtab->filename refererences by symtab_to_filename_for_display
2631 (create_sals_line_offset, convert_linespec_to_sals): New variable
2632 fullname, initialize it, replace symtab->filename reference by the
2634 * linux-fork.c: Include source.h.
2635 (info_checkpoints_command): Replace symtab->filename refererences by
2636 symtab_to_filename_for_display calls.
2637 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
2638 by symtab_to_filename_for_display calls.
2639 * mdebugread.c: Include source.h.
2640 (psymtab_to_symtab_1): Replace symtab->filename refererences by
2641 symtab_to_filename_for_display calls.
2642 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
2643 (mi_cmd_file_list_exec_source_files): Likewise.
2644 * printcmd.c: Include source.h.
2645 (build_address_symbolic): Replace symtab->filename refererences by
2646 symtab_to_filename_for_display calls.
2647 * psymtab.c (partial_map_symtabs_matching_filename)
2648 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
2649 with psymtab_to_fullname.
2650 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
2651 by symtab_to_filename_for_display calls.
2652 (stpy_get_filename): New variable filename, initialize it, use instead
2653 of symtab->filename refererences.
2654 (salpy_str): Make variable filename const char *. Replace
2655 symtab->filename refererences by symtab_to_filename_for_display calls.
2656 * skip.c: Include source.h and filenames.h.
2657 (skip_file_command): Remove const from the symtab variable. Replace
2658 symtab->filename refererences by symtab_to_fullname call.
2659 (function_name_is_marked_for_skip): New variables searched_for_fullname
2660 and fullname. Use them to search also with symtab's fullname.
2661 * source.c (find_source_lines): Replace symtab->filename refererences
2662 by symtab_to_filename_for_display calls.
2663 (print_source_lines_base): New variable filename, use it instead of
2664 symtab->filename. Replace symtab->filename refererences by
2665 symtab_to_filename_for_display calls.
2666 (line_info, forward_search_command): Replace symtab->filename
2667 refererences by symtab_to_filename_for_display calls.
2668 (reverse_search_command): Replace symtab->filename refererences by
2669 symtab_to_filename_for_display calls. New variable filename for it.
2670 * stack.c (frame_info): Likewise.
2671 * symmisc.c: Include source.h.
2672 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
2673 (maintenance_info_symtabs): Replace symtab->filename refererences by
2674 symtab_to_filename_for_display calls.
2675 * symtab.c (iterate_over_some_symtabs): Call
2676 compare_filenames_for_search also with symtab_to_fullname.
2677 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
2678 symtab->filename refererences by symtab_to_filename_for_display calls.
2679 (find_line_symtab): Replace symtab->filename refererences by
2680 symtab_to_filename_for_display calls.
2681 (file_matches): Replace filename_cmp by compare_filenames_for_search.
2682 (print_symbol_info): Make the last parameter const char *. New
2683 variable s_filename. Use it in the function.
2684 (symtab_symbol_info): Make the last_filename variable const char *.
2685 Replace symtab->filename refererences by symtab_to_filename_for_display
2687 (rbreak_command): New variable fullname. Use it. Replace
2688 symtab->filename refererence by symtab_to_filename_for_display call.
2689 * tracepoint.c (set_traceframe_context, trace_find_line_command)
2690 (print_one_static_tracepoint_marker): Replace symtab->filename
2691 refererences by symtab_to_filename_for_display calls.
2692 * tui/tui-source.c (tui_set_source_content): New variables filename and
2693 s_filename. Replace symtab->filename refererences by this variable.
2694 Replace other symtab->filename refererences by
2695 symtab_to_filename_for_display calls.
2697 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
2698 Jan Kratochvil <jan.kratochvil@redhat.com>
2700 Add a new variable that controls a way in which filenames are
2702 * NEWS (set filename-display): New entry.
2703 * source.c (filename_display_basename, filename_display_relative)
2704 (filename_display_absolute, filename_display_kind_names)
2705 (filename_display_string, show_filename_display_string)
2706 (symtab_to_filename_for_display): New.
2707 (_initialize_source): Added initialization of 'filename-display'
2709 * source.h (symtab_to_filename_for_display): Added declaration.
2710 * stack.c (print_frame): Added new variable and calling of a new
2711 function and condition with this variable. Changed third argument of
2712 calling of a function.
2714 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2716 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
2717 Rename field reference filename to fullname.
2718 * tui/tui-data.h (struct tui_source_info): Rename field filename to
2719 fullname. New comment for it.
2720 * tui/tui-source.c (tui_set_source_content): Rename field reference
2721 filename to fullname. Initialize field by symtab_to_fullname now.
2722 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
2723 reference filename to fullname. Use symtab_to_fullname during
2726 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2729 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
2730 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
2731 filename to fullname. Rename variable this_name to this_fullname.
2732 Lowercase FILENAME_CMP call.
2733 (dw2_find_symbol_file): New comment for the returned string.
2734 (dwarf2_gdb_index_functions): Rename the function to
2735 dw2_expand_symtabs_with_fullname.
2736 * psymtab.c (read_psymtabs_with_filename): Rename to ...
2737 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
2739 (psym_functions): Rename the function to read_psymtabs_with_fullname.
2740 * symfile.h (struct quick_symbol_functions): Rename field
2741 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
2742 parameter filename to fullname. Document returned string meaning for
2744 * symtab.c (find_line_symtab): Rename the called function to
2745 expand_symtabs_with_fullname.
2747 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2750 * breakpoint.c (clear_command): Remove variable is_abs, unify the
2751 call of filename_cmp with compare_filenames_for_search.
2752 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
2753 is_abs, unify the call of FILENAME_CMP with
2754 compare_filenames_for_search. New gdb_asserts for real_path and name.
2755 Unify the call of compare_filenames_for_search with FILENAME_CMP.
2756 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
2757 * symfile.h (struct quick_symbol_functions): Extend the comment for
2758 map_symtabs_matching_filename.
2759 * symtab.c (compare_filenames_for_search): Remove the function comment
2760 relative path requirement. Handle absolute filenames, with a comment.
2761 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
2762 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
2763 real_path and name. Unify the call of compare_filenames_for_search
2765 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
2767 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2770 * breakpoint.c (print_breakpoint_location): Replace bp_location field
2771 source_file references by symtab field references. Remove variables
2773 (momentary_breakpoint_from_master, add_location_to_breakpoint):
2774 (clear_command, say_where): Replace bp_location field source_file
2775 references by symtab field references.
2776 (bp_location_dtor): Remove the source_file reference.
2777 (update_static_tracepoint): Replace bp_location field source_file
2778 references by symtab field references.
2779 (breakpoint_free_objfile): New function.
2780 * breakpoint.h (struct bp_location): Extend the comment for line_number.
2781 Replace the field source_file by field symtab, extend its comment.
2782 (breakpoint_free_objfile): New declaration.
2783 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
2784 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
2785 field source_file references by symtab field references.
2787 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2789 Replace xfullpath calls by gdb_realpath calls.
2790 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
2792 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
2793 Remove it from the iterate_over_some_symtabs call.
2794 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
2795 Remove it from the dw2_map_expand_apply calls, remove a block handling
2797 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
2798 Remove it from the iterate_over_some_symtabs call.
2799 (partial_map_symtabs_matching_filename): Remove parameter full_path.
2800 Remove it from the partial_map_expand_apply calls, remove a block
2801 handling it. Drop gdb_realpath call and cleanups from the real_path
2803 * source.c (openp): Drop the comment part about xfullpath. Replace
2804 xfullpath calls by gdb_realpath calls.
2805 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
2806 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
2807 from method map_symtabs_matching_filename and its comment.
2808 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
2810 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
2811 remove it also from the function comment, remove a block handling it.
2812 Drop gdb_realpath call and cleanups from the real_path handling.
2813 (iterate_over_symtabs): Drop variable full_path and its use.
2814 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
2815 * utils.c (xfullpath): Remove.
2816 * utils.h (xfullpath): Remove.
2818 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
2820 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
2821 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
2822 (ALLDEPFILES): Add ppc64-tdep.c.
2823 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
2824 ppc64-tdep.o to gdb_target_obs.
2825 * ppc64-tdep.h: New file.
2826 * ppc64-tdep.c: New file.
2827 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
2828 ppc-linux-tdep.c to here.
2829 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
2830 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
2831 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
2832 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
2833 from ppc-linux-tdep.c to here.
2834 (ppc64_convert_from_func_ptr_addr): Rename from
2835 ppc64_linux_convert_from_func_ptr_addr to
2836 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
2839 (read_insn): Move from ppc-linux-tdep.c to here.
2840 (insns_match_pattern, insn_d_field, insn_ds_field): Move
2841 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
2842 * ppc-linux-tdep.c: Include ppc64-tdep.h.
2843 Removed above functions.
2844 (ppc_linux_init_abi): Adjust.
2846 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2848 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
2850 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2852 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
2854 2013-02-01 Pedro Alves <palves@redhat.com>
2856 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
2857 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
2859 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2861 * elfread.c (elf_symfile_read): Limit separate debug info additions to
2862 files with no separate debug info.
2863 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
2864 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
2865 only for files with no separate debug info.
2867 2013-01-31 Tom Tromey <tromey@redhat.com>
2869 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
2871 (struct jit_program_space_data): Rename from jit_inferior_data.
2873 (get_jit_program_space_data): Rename from get_jit_inferior_data.
2874 Change return type. Attach data to program space.
2875 (jit_program_space_data_cleanup): Rename from
2876 jit_inferior_data_cleanup; change argument type.
2877 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
2879 (jit_register_code): Update.
2880 (jit_update_inferior_cache): Remove.
2881 (jit_breakpoint_deleted): Get jit data from the location's program
2883 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
2884 'ps_data', change type.
2885 (jit_inferior_init, jit_breakpoint_re_set_internal)
2886 (jit_event_handler): Update.
2887 (free_objfile_data): Get data from objfile's program space.
2888 (_initialize_jit): Update.
2890 2013-01-31 Tom Tromey <tromey@redhat.com>
2893 * jit.c (struct jit_inferior_data) <cached_code_address,
2894 jit_breakpoint>: New fields.
2895 (jit_breakpoint_re_set_internal): Fix logging. Only create
2896 breakpoint if cached address has changed.
2897 (jit_update_inferior_cache, jit_breakpoint_deleted): New
2899 (_initialize_jit): Register breakpoint deleted observer.
2901 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2903 * infrun.c (handle_syscall_event): Remove unused gdbarch.
2904 (save_infcall_suspend_state): Ifdef out unused inf.
2905 (restore_infcall_suspend_state): Ifdef out unused inf.
2906 * jit.c (jit_register_code): Remove unused i, b, inf_data.
2907 (jit_frame_sniffer): Remove unused inf_data.
2909 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2911 * c-exp.y (classify_inner_name): Remove unused type.
2912 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
2913 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
2915 (c_get_string): Remove unused kind.
2916 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
2918 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2920 * charset.c (intermediate_encoding): Remove unused i.
2921 * completer.c (signal_completer): Remove unused i.
2922 * continuations.c (discard_my_continuations_1): Remove unused
2924 * corelow.c (core_close): Remove unuseD name.
2925 (get_core_siginfo): Remove unused pid.
2926 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
2928 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
2929 (loclist_describe_location): Remove unused first.
2930 * event-top.c (command_line_handler): Remove unused got_eof.
2931 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
2932 (resize_section_table): Remove unused old_value.
2933 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
2934 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
2935 * i386-tdep.c (i386_process_record): Remove unused rex.
2936 * infcmd.c (get_return_value): Remove unused uiout.
2937 * jv-lang.c (type_from_class): Remove unused is_array.
2938 * jv-valprint.c (java_val_print): Remove unused i.
2939 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
2940 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
2941 * m2-typeprint.c (m2_print_type): Remove unused code.
2942 * macroexp.c (get_character_constant): Remove unused body_start.
2943 (macro_stringify): Remove unused result.
2944 * objc-lang.c (find_methods): Remove unused gdbarch.
2945 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
2946 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
2947 * stack.c (print_frame_args): Remove unused summary.
2948 * thread.c (thread_apply_command): Remove unused p.
2949 * valarith.c (value_x_unop): Remove unused mangle_ptr.
2950 * valops.c (search_struct_method): Remove unused skip.
2951 * valprint.c (generic_val_print): Remove unused byte_order.
2952 * varobj.c (varobj_update): Remove unused changed.
2953 * cli/cli-cmds.c (complete_command): Remove unused next_item.
2954 (alias_command): Remove unused c.
2955 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
2956 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
2958 (mi_cmd_data_write_memory): Remove unused word_format.
2959 (mi_cmd_data_write_memory_bytes): Remove unused r.
2960 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
2962 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
2963 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
2966 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2968 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
2969 * symtab.c (iterate_over_symtabs): Remove unused s.
2970 (find_pc_sect_symtab): Remove unused pspAce.
2971 (find_pc_sect_line): Remove unused alt_symtab.
2972 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
2973 (completion_list_add_name): Remove unused newsize.
2975 2013-01-31 Tom Tromey <tromey@redhat.com>
2978 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
2981 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2983 * target.c (target_read_string): Remove unused origlen.
2985 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2987 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
2988 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
2989 * ax-general.c (ax_print): Remove unused is_float.
2990 * blockframe.c (block_innermost_frame): Remove unused start, end.
2991 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
2993 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2995 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
2996 (svr4_read_so_list): Remove unused lmo.
2997 * solib-target.c (solib_target_relocate_section_addresses): Remove
3000 2013-01-30 Tom Tromey <tromey@redhat.com>
3002 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
3004 2013-01-30 Tom Tromey <tromey@redhat.com>
3006 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
3007 * utils.c (gnu_debuglink_crc32): Remove.
3008 * utils.h (gnu_debuglink_crc32): Don't declare.
3010 2013-01-30 Tom Tromey <tromey@redhat.com>
3012 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
3013 (read_structure_type, read_enumeration_type): Remove cast.
3015 2013-01-30 Tom Tromey <tromey@redhat.com>
3017 * dwarf2read.c (read_namespace_type): Remove cast.
3018 (read_typedef): Likewise.
3020 2013-01-29 Tom Tromey <tromey@redhat.com>
3022 * dwarf2read.c (free_dwo_file): Remove assert.
3024 2013-01-29 Tom Tromey <tromey@redhat.com>
3026 * value.c (deprecated_set_value_modifiable): Remove.
3027 * value.h (deprecated_set_value_modifiable): Remove.
3029 2013-01-28 Doug Evans <dje@google.com>
3031 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
3032 to addresses from dwo files.
3034 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
3036 * valops.c (find_overload_match): Remove unused argument 'lax'.
3037 * value.h: Remove unused argument 'lax' from the declaration of
3038 find_overload_match.
3039 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
3040 to find_overload_match.
3041 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
3042 argument to find_overload_match.
3044 2013-01-25 Tom Tromey <tromey@redhat.com>
3046 * dwarf2read.c (processing_has_namespace_info): Remove.
3047 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
3048 (process_die, read_func_scope, dwarf2_start_symtab)
3049 (new_symbol_full): Update.
3051 2013-01-25 Tom Tromey <tromey@redhat.com>
3053 * cp-namespace.c (cp_set_block_scope): Remove.
3054 * cp-support.h (cp_set_block_scope): Remove.
3055 * dbxread.c: Include block.h.
3056 (cp_set_block_scope): New function.
3057 (process_one_symbol): Update.
3058 * dwarf2read.c (read_func_scope): Use block_set_scope.
3060 2013-01-25 Pedro Alves <palves@redhat.com>
3062 * remote.c (add_current_inferior_and_thread): Tweak comment.
3064 2013-01-25 Tom Tromey <tromey@redhat.com>
3066 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
3067 (cp_add_using_directive): Add 'copy_names' argument.
3068 * cp-support.h (cp_add_using_directive): Update.
3069 (struct using_direct) <import_src, import_dest, alias,
3070 declaration>: Now const.
3071 * dwarf2read.c (read_import_statement): Use obconcat.
3072 Don't copy names passed to cp_add_using_directive.
3074 2013-01-25 Tom Tromey <tromey@redhat.com>
3076 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
3078 2013-01-25 Pedro Alves <palves@redhat.com>
3080 * remote.c (stop_reply_extract_thread): New.
3081 (add_current_inferior_and_thread): New parameter 'wait_status'.
3083 (remote_start_remote): Pass wait status to
3084 add_current_inferior_and_thread.
3085 (extended_remote_run): Update comment.
3086 (extended_remote_create_inferior_1): Pass wait status to
3087 add_current_inferior_and_thread.
3089 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
3090 Ulrich Weigand <uweigand@de.ibm.com>
3092 * valarith.c (value_vector_widen): New function for replicating a
3093 scalar into a vector.
3094 (value_binop): Use value_vector_widen to widen scalar to vector
3095 rather than casting, this better matches gcc C behaviour.
3096 * valops.c (value_casst): Update logic for casting between vector
3097 types, and for casting from scalar to vector, try to match gcc C
3099 * value.h (value_vector_widen): Declare.
3100 * opencl-lang.c (opencl_value_cast): New opencl specific casting
3101 function, handle special case for casting scalar to vector.
3102 (opencl_relop): Use opencl_value_cast.
3103 (evaluate_subexp_opencl): Use opencl_value_cast instead of
3104 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
3105 in order to use opencl_value_cast.
3107 2013-01-25 Yao Qi <yao@codesourcery.com>
3109 * event-loop.c: Include "queue.h".
3110 (gdb_event_p): New typedef.
3111 (DECLARE_QUEUE_P): Use.
3112 (DEFINE_QUEUE_P): Use.
3113 (async_queue_event): Remove.
3114 (gdb_event_xfree): New.
3115 (initialize_event_loop): New.
3116 (process_event): Use QUEUE macros.
3117 (event_queue): Remove.
3118 (gdb_wait_for_event): Caller update.
3119 (check_async_event_handlers): Likewise.
3120 (poll_timers): Likewise.
3121 * event-loop.h (initialize_event_loop): Declare.
3122 * event-loop.c (gdb_event_xfree): New.
3123 * top.c (gdb_init): Call initialize_event_loop.
3125 2013-01-25 Yao Qi <yao@codesourcery.com>
3127 * event-loop.c (async_queue_event): Remove one parameter
3128 'position'. Remove code handling 'position' == TAIL.
3129 (gdb_wait_for_event): Caller update.
3130 (check_async_event_handlers): Caller update.
3131 (poll_timers): Caller update.
3132 * event-loop.h (enum queue_position): Remove.
3134 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
3136 * MAINTAINERS: Update my email.
3138 2013-01-25 Yao Qi <yao@codesourcery.com>
3140 * main.c (print_gdb_help): Remove "--epoch" from the help
3143 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
3145 * symtab.c (skip_prologue_using_sal): Consider a file
3146 change the same as an increased line number
3148 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3150 * MAINTAINERS (Write After Approval): Add myself to the list.
3152 2013-01-24 Tom Tromey <tromey@redhat.com>
3154 * ada-lang.h (ada_decode_symbol): Make return type const.
3155 * ada-lang.c (ada_decode_symbol): Likewise.
3157 2013-01-23 Doug Evans <dje@google.com>
3159 * linespec.c (find_linespec_symbols): Make static.
3161 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3163 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
3164 type on float conversion for complex type.
3166 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
3168 Add a new class gdb.Architecture which exposes GDB's
3169 internal representation of architecture via GDB Python API.
3170 * Makefile.in: Add entries corresponding to the new file
3172 * NEWS (Python Scripting): Add entries for the new class
3173 gdb.Architecture and the new method gdb.Frame.architecture.
3174 * python/py-arch.c: Implement gdb.Architecture class.
3175 * python/py-frame.c (frapy_arch): Implement the method
3176 gdb.Frame.architecture().
3177 (frame_object_methods): Add 'architecture' to the method table.
3178 * python/python-internal.h: Add declarations of new utility
3180 * python/python.c (_initialize_python): Initialize
3181 gdb.Architecture class.
3183 2013-01-23 Doug Evans <dje@google.com>
3185 Work around binutils/15021.
3186 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
3187 type_unit_group out of union s. All uses updated.
3188 (read_index_from_section): Watch for index version 8.
3189 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
3191 (write_psymtabs_to_index): Increment version number to 8.
3193 2013-01-22 Pedro Alves <palves@redhat.com>
3195 * annotate.c (breakpoint_changed): Skip if breakpoint is not
3198 2013-01-22 Pedro Alves <palves@redhat.com>
3200 * annotate.c (annotate_breakpoints_changed): Rename to ...
3201 (annotate_breakpoints_invalid): ... this. Make static.
3202 (breakpoint_changed): Adjust.
3203 (_initialize_annotate): Always install the observers. Install a
3204 "breakpoint_created" observer.
3205 * annotate.h (annotate_breakpoints_changed): Delete declaration.
3206 * breakpoint.c (set_breakpoint_condition)
3207 (breakpoint_set_commands, do_map_commands_command)
3208 (init_raw_breakpoint, clear_command, set_ignore_count)
3209 (enable_breakpoint_disp): No longer call
3210 annotate_breakpoints_changed.
3212 2013-01-22 Pedro Alves <palves@redhat.com>
3214 * annotate.c: Include "inferior.h".
3215 (frames_invalid_emitted)
3216 (breakpoints_invalid_emitted): New globals.
3217 (async_background_execution_p): New function.
3218 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
3219 emitting the annotation if it has already been emitted.
3220 (annotate_display_prompt): New function.
3221 * annotate.h (annotate_display_prompt): New declaration.
3222 * event-top.c: Include annotate.h.
3223 (display_gdb_prompt): Call annotate_display_prompt.
3225 2013-01-22 Pedro Alves <palves@redhat.com>
3227 * annotate.c (ignore_count_changed): Delete.
3228 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
3229 (annotate_ignore_count_change): Delete.
3230 (annotate_stopped): Don't emit a delayed breakpoints-changed
3232 * annotate.h (annotate_ignore_count_change): Delete.
3233 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
3234 annotate_ignore_count_change.
3236 2013-01-22 Tom Tromey <tromey@redhat.com>
3238 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
3239 require_rvalue for a register location.
3241 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
3243 * breakpoint.c (print_one_breakpoint_location): Add MI
3244 field 'thread-groups' when printing a breakpoint.
3245 (output_thread_groups): New function.
3247 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
3249 * python/lib/gdb/commands/explore.py
3250 (CompoundExplorer.explore_expr): Correct the name of a method
3252 (ExploreTypeCommand.invoke): Add a missing 'return'.
3254 2013-01-21 Tom Tromey <tromey@redhat.com>
3256 * gdb_obstack.h (obconcat): Move declaration here, from...
3257 * symfile.h (obconcat): ... here.
3258 * gdb_obstack.c: New file.
3259 (obconcat): Move from...
3260 * symfile.c (obconcat): ... here.
3261 * Makefile.in (SFILES): Add gdb_obstack.c.
3262 (COMMON_OBS): Add gdb_obstack.o.
3264 2013-01-21 Tom Tromey <tromey@redhat.com>
3266 * symfile.h (obsavestring): Don't declare.
3267 * symfile.c (obsavestring): Remove.
3268 * ada-exp.y: Use obstack_copy0, not obsavestring.
3269 * ada-lang.c: Use obstack_copy0, not obsavestring.
3270 * coffread.c: Use obstack_copy0, not obsavestring.
3271 * cp-namespace.c: Use obstack_copy0, not obsavestring.
3272 * dbxread.c: Use obstack_copy0, not obsavestring.
3273 * dwarf2read.c: Use obstack_copy0, not obsavestring.
3274 * jit.c: Use obstack_copy0, not obsavestring.
3275 * mdebugread.c: Use obstack_copy0, not obsavestring.
3276 * psymtab.c: Use obstack_copy0, not obsavestring.
3277 * stabsread.c: Use obstack_copy0, not obsavestring.
3278 * xcoffread.c: Use obstack_copy0, not obsavestring.
3280 2013-01-21 Tom Tromey <tromey@redhat.com>
3282 * dwarf2read.c (fixup_go_packaging): Save package name
3284 * gdbtypes.c (init_type): Don't copy name.
3286 2013-01-21 Tom Tromey <tromey@redhat.com>
3288 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
3290 (struct attribute) <u.str>: Now const.
3291 (struct fnfieldlist) <name>: Now const.
3292 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
3293 (partial_die_parent_scope): Make return type const.
3294 (partial_die_full_name, add_partial_symbol): Update.
3295 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
3297 (find_file_and_directory): Make 'name' and 'comp_dir' const.
3298 (read_file_scope, read_func_scope, dwarf2_add_field)
3299 (dwarf2_add_member_fn, read_structure_type)
3300 (process_enumeration_scope, read_array_type, read_module_type)
3301 (read_base_type, read_subrange_type): Update.
3302 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
3303 (new_symbol_full, guess_full_die_structure_name): Update.
3304 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
3305 (dwarf2_name): Return const type.
3306 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
3309 2013-01-21 Tom Tromey <tromey@redhat.com>
3311 * gdbtypes.c (init_type): Make 'name' const.
3312 * gdbtypes.h (init_type): Update.
3314 2013-01-21 Tom Tromey <tromey@redhat.com>
3316 * buildsym.c (patch_subfile_names): Use set_last_source_file.
3317 (start_symtab): Make 'name' and 'dirname' const. Use
3318 set_last_source_file.
3319 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
3320 (last_source_file): Define. Now static.
3321 (set_last_source_file, get_last_source_file): New functions.
3322 * buildsym.h (last_source_file): Don't declare.
3323 (start_symtab): Update.
3324 (set_last_source_file, get_last_source_file): Declare.
3325 * coffread.c (complete_symtab): Use set_last_source_file.
3326 (coff_end_symtab): Likewise.
3327 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
3328 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
3329 set_last_source_file.
3330 (process_one_symbol): Use get_last_source_file.
3331 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
3332 (psymtab_to_symtab_1): Use get_last_source_file.
3333 * xcoffread.c (process_linenos): Use get_last_source_file.
3334 (complete_symtab): Use set_last_source_file.
3335 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
3336 (scan_xcoff_symtab): Use set_last_source_file.
3338 2013-01-21 Tom Tromey <tromey@redhat.com>
3340 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
3341 (symbol_set_names): Remove casts. Handle field const-ness.
3343 2013-01-21 Tom Tromey <tromey@redhat.com>
3345 * dwarf2read.c (new_symbol_full): Remove cast.
3346 * symtab.c (symbol_set_demangled_name): Make 'name' const.
3347 * symtab.h (symbol_set_demangled_name): Update.
3349 2013-01-21 Tom Tromey <tromey@redhat.com>
3351 * main.c (captured_main): Call bfd_init.
3353 2013-01-21 Tom Tromey <tromey@redhat.com>
3355 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
3356 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
3357 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
3360 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3362 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
3364 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3366 Fix gdb.fortran/common-block.exp crash in PIE mode.
3367 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
3369 * f-valprint.c (info_common_command_for_block): Expect
3370 LOC_COMMON_BLOCK in gdb_assert.
3371 * symtab.h (struct general_symbol_info): Update comment for the
3372 common_block member.
3373 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
3374 (enum address_class): New member LOC_COMMON_BLOCK.
3376 2013-01-18 David Blaikie <dblaikie@gmail.com>
3378 * MAINTAINERS (Write After Approval): Add "David Blaikie".
3380 2013-01-18 Tom Tromey <tromey@redhat.com>
3383 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
3384 Call require_rvalue.
3386 2013-01-18 Yao Qi <yao@codesourcery.com>
3388 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
3389 (dbx_read_symtab): New declaration.
3390 (dbx_psymtab_to_symtab): Delete.
3391 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
3392 Rename parameter PST to SELF. Exchanged two parameters.
3393 (start_psymtab): Caller update.
3394 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
3395 (dwarf2_read_symtab): New declaration.
3396 (dwarf2_psymtab_to_symtab): Delete.
3397 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
3398 Rename parameter PST to SELF. Exchanged two parameters.
3399 (create_partial_symtab): Caller update.
3400 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
3401 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
3402 Rename parameter PST to SELF. Exchanged two parameters.
3403 (parse_partial_symbols, new_psymtab): Caller update.
3404 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
3406 * psymtab.c (psymtab_to_symtab): Caller update.
3407 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
3408 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
3409 Rename parameter PST to SELF. Exchanged two parameters.
3410 (xcoff_start_psymtab): Caller update.
3412 2013-01-18 Yao Qi <yao@codesourcery.com>
3414 * infrun.c (proceed): Rename local variable 'oneproc' to
3417 2013-01-17 Doug Evans <dje@google.com>
3419 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
3420 (dw2_build_type_unit_groups): Delete. All uses updated.
3422 * symtab.h (struct symbol_search): Add comment.
3424 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3426 * symtab.c (compare_filenames_for_search): New comment for
3429 2013-01-17 Tom Tromey <tromey@redhat.com>
3431 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
3433 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3435 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
3436 initialize it by existing make_cleanup. Call new do_cleanups.
3438 2013-01-17 Tom Tromey <tromey@redhat.com>
3440 * cp-abi.c (cp_abi_completer): New function.
3441 (_initialize_cp_abi): Set completer for "set cp-abi".
3443 2013-01-17 Tom Tromey <tromey@redhat.com>
3445 * mem-break.c: Remove obsolete comment.
3446 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
3448 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3450 * jit.c (jit_reader_load_command): Interpret the jit reader name
3451 as an absolute path if it begins with a forward slash.
3453 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3457 * jit.c (finalize_symtab): Ensure that only the global block has a
3460 2013-01-17 Pedro Alves <palves@redhat.com>
3462 * acinclude.m4: Include ../config/plugins.m4,
3463 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
3464 * Makefile.in (aclocal_m4_deps): Update.
3465 * aclocal.m4: Renegerate.
3467 2013-01-16 Doug Evans <dje@google.com>
3469 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
3471 2013-01-16 Pedro Alves <palves@redhat.com>
3472 Tom Tromey <tromey@redhat.com>
3475 * NEWS: Add "catch signal".
3476 * breakpoint.c (base_breakpoint_ops): No longer static.
3477 (bpstat_explains_signal): New function.
3478 (init_catchpoint): No longer static.
3479 (base_breakpoint_explains_signal): New function.
3480 (base_breakpoint_ops): Initialize new field.
3481 * breakpoint.h (enum bpstat_signal_value): New.
3482 (struct breakpoint_ops) <explains_signal>: New field.
3483 (bpstat_explains_signal): Remove macro, declare as function.
3484 (base_breakpoint_ops, init_catchpoint): Declare.
3485 * break-catch-sig.c: New file.
3486 * inferior.h (signal_catch_update): Declare.
3487 * infrun.c (signal_catch): New global.
3488 (handle_syscall_event): Update for change to
3489 bpstat_explains_signal.
3490 (handle_inferior_event): Likewise. Always handle random signals
3492 (signal_cache_update): Check signal_catch.
3493 (signal_catch_update): New function.
3494 (_initialize_infrun): Initialize signal_catch.
3495 * Makefile.in (SFILES): Add break-catch-sig.c.
3496 (COMMON_OBS): Add break-catch-sig.o.
3498 2013-01-16 Tom Tromey <tromey@redhat.com>
3500 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
3501 (print_one_catch_solib, print_one_catch_syscall)
3502 (print_one_catch_exec, print_one_exception_catchpoint): Emit
3505 2013-01-16 Yao Qi <yao@codesourcery.com>
3507 * printcmd.c (current_display_number): Make it static.
3509 2013-01-16 Yao Qi <yao@codesourcery.com>
3511 * infcmd.c (step_once): Don't check '!single_inst' as it was
3514 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3516 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
3518 2013-01-14 Tom Tromey <tromey@redhat.com>
3520 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
3522 * command.h (add_setshow_string_noescape_cmd): Update.
3523 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
3524 (complete_set_gnutarget): New function.
3525 (_initialize_core): Set the "set gnutarget" completer.
3527 2013-01-14 Tom Tromey <tromey@redhat.com>
3530 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
3531 (c_type_print_modifier): Likewise.
3532 * dwarf2read.c (read_tag_restrict_type): New function.
3533 (read_type_die_1): Handle DW_TAG_restrict_type.
3534 * gdbtypes.c (make_restrict_type): New function.
3535 (recursive_dump_type): Handle TYPE_RESTRICT.
3536 * gdbtypes.h (enum type_flag_values): Renumber.
3537 (enum type_instance_flag_value): Add
3538 TYPE_INSTANCE_FLAG_RESTRICT.
3539 (TYPE_RESTRICT): New macro.
3540 (make_restrict_type): Declare.
3542 2013-01-14 Tom Tromey <tromey@redhat.com>
3545 * psymtab.c (struct psymtab_state): New.
3546 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
3548 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
3549 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
3551 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
3552 Pedro Alves <palves@redhat.com>
3556 * remote.c (remote_threads_info): Make a copy of the reply from
3557 qfThreadInfo and use that instead of rs->buf.
3559 2013-01-14 Yao Qi <yao@codesourcery.com>
3561 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
3562 (dbx_psymtab_to_symtab): Likewise.
3563 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
3564 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
3565 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
3567 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3569 * parse.c (parse_exp_in_context): New variable inner_chain. Call
3570 make_cleanup_restore_current_language. Call set_language. Move
3571 OLD_CHAIN and INNER_CHAIN cleanups.
3572 * utils.c (do_restore_current_language)
3573 (make_cleanup_restore_current_language): New functions.
3574 * utils.h (make_cleanup_restore_current_language): New declaration.
3576 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3578 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
3581 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
3582 non-existing files if FILENAME is already absolute.
3584 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3586 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
3587 fputs_filtered. Append trailing newline.
3589 2013-01-11 Yao Qi <yao@codesourcery.com>
3590 Stan Shebs <stan@codesourcery.com>
3592 * psymtab.c (init_psymbol_list): Clarify the comment.
3594 2013-01-11 Yao Qi <yao@codesourcery.com>
3596 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
3597 (update_dprintf_command_list): Assert that 'printf_line' is
3598 non-null. Remove condition check.
3600 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3603 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
3605 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
3607 * tui/tui-source.h (tui_source_is_displayed): Likewise.
3609 2013-01-09 Anthony Green <green@moxielogic.com>
3611 * cp-abi.c (cplus_print_vtable): Don't return value from void
3613 * ada-lang.c (re_set_catch_assert): Ditto.
3615 2013-01-09 Doug Evans <dje@google.com>
3617 * symfile.h (quick_symbol_functions): Delete member
3618 pre_expand_symtabs_matching. All uses removed.
3619 * dwarf2read.c (dw2_lookup_symbol): Implement.
3620 (dw2_do_expand_symtabs_matching): Delete.
3621 (dw2_pre_expand_symtabs_matching): Delete.
3622 (struct dw2_symtab_iterator): New type.
3623 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
3624 (dw2_expand_symtabs_for_function): Rewrite.
3625 (dwarf2_gdb_index_functions): Update.
3626 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
3627 (psym_functions): Update.
3629 2013-01-09 Tom Tromey <tromey@redhat.com>
3631 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
3632 * configure: Rebuild.
3633 * configure.ac: Add somread.o to the build if BFD has SOM
3635 * somread.c: Include som/aout.h, not syms.h.
3636 (som_symtab_read): Use som_external_symbol_dictionary_record.
3637 Unpack records manually.
3638 (_initialize_somread): Declare.
3640 2012-01-08 Mike Frysinger <vapier@gentoo.org>
3642 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
3643 Cast return_address to 64bits.
3645 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
3647 * printcmd.c: Remove define of function output_command.
3648 * tracepoint.c: Remove extern of function output_command.
3649 * valprint.h: (output_command): New extern.
3651 2013-01-07 Tom Tromey <tromey@redhat.com>
3653 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
3655 (objc_language_defn): Use c_printchar, c_printstr,
3658 2013-01-07 Tom Tromey <tromey@redhat.com>
3662 * ada-valprint.c (printstr, print_field_values): Remove
3664 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
3666 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
3668 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
3669 * main.c (captured_main): Remove "epoch" argument.
3670 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
3671 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
3672 * p-valprint.c (pascal_object_print_value_fields): Remove
3674 * printcmd.c (print_command_1): Remove 'inspect' argument.
3675 (print_command, call_command): Update.
3676 (inspect_command): Remove.
3677 (_initialize_printcmd): Make "inspect" an alias for "print".
3678 * top.c (epoch_interface): Remove.
3679 * top.h (epoch_interface): Remove.
3680 * valprint.c (user_print_options): Update.
3681 (print_converted_chars_to_obstack): Remove "inspect_it" code.
3682 * valprint.h (struct value_print_options) <inspect_it>: Remove
3685 2013-01-04 Tom Tromey <tromey@redhat.com>
3687 * valprint.h (read_string): Add 'extern'.
3689 2013-01-07 Joel Brobecker <brobecker@adacore.com>
3691 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
3692 used to decide whether to define darwin_read_dyld_info or not.
3694 2013-01-03 Pierre Muller <muller@sourceware.org>
3696 * main.c (relocate_gdb_directory): Avoid calling stat function
3699 2013-01-03 Yao Qi <yao@codesourcery.com>
3701 * psymtab.c (fixup_psymbol_section): Update declaration.
3702 (fixup_psymbol_section): Remove code returning value.
3704 2013-01-03 Yao Qi <yao@codesourcery.com>
3706 * symtab.h: Remove some out of date comments.
3707 (enum exception_event_kind): Move it ...
3708 * breakpoint.c: ... here.
3710 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
3713 * darwin-nat.c (darwin_read_dyld_info): Only build if
3714 TASK_DYLD_INFO_COUNT is defined.
3715 (darwin_xfer_partial): Call darwin_read_dyld_info only if
3716 TASK_DYLD_INFO_COUNT is defined.
3718 2013-01-02 Tom Tromey <tromey@redhat.com>
3720 * symfile.h (struct ecoff_debug_hack): Remove.
3721 * objfiles.c: Don't include mdebugread.h.
3723 2013-01-02 Tom Tromey <tromey@redhat.com>
3725 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
3726 * configure.ac: Check for Mach-O support in BFD. Update
3728 * configure: Rebuild.
3730 2013-01-02 Tom Tromey <tromey@redhat.com>
3732 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
3733 * configure.ac: Use GDB_AC_CHECK_BFD.
3734 * configure: Rebuild.
3736 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
3738 * MAINTAINERS: Update my email.
3740 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3742 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
3744 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3746 * rs6000-nat.c (bss_data_overlap): New function.
3747 (vmap_symtab): Use it to adjust the .bss section's offset.
3749 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3751 Update year range in copyright notice of all files.
3753 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
3755 * top.c (print_gdb_version): Update copyright year.
3757 For older changes see ChangeLog-2012.
3763 version-control: never
projects / deliverable / binutils-gdb.git / blob