1 2009-09-10 Michael Snyder <msnyder@vmware.com>
3 * remote.c (PACKET_bc, PACKET_bs): New enums.
4 (remote_protocol_features): Add ReverseStep, ReverseContinue.
5 (remote_resume): Check for reverse capability.
6 (_initialize_remote): Add packet config for "bs" and "bc" packets.
7 * NEWS (new options): Mention set/show for "bs" and "bc" packets.
9 2009-09-10 Joel Brobecker <brobecker@adacore.com>
11 * top.c (interactive_mode): New static variable.
12 (show_interactive_mode): New function.
13 (input_from_terminal_p): If interactive_mode is not auto, then
14 use that rather than checking the stdin settings.
15 (init_main): Add "set/show interactive-mode" command.
16 * NEWS: Add entry for new "set/show interactive-mode" command.
18 2009-09-10 Joel Brobecker <brobecker@adacore.com>
20 * configure.ac: Fix the names of the python source and object files
21 following the renaming done in an earlier change.
22 * configure: Regenerate.
24 2009-09-08 Joel Brobecker <brobecker@adacore.com>
26 Fix a build failure on AIX.
27 * rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
28 instead of relying on the to_sections/to_section_end target_ops
29 field, since the latter have been removed in a previous patch.
31 2009-09-08 Thiago Jung Bauermann <thiago.bauermann@gmail.com>
33 * Makefile.in (py-cmd.o): Renamed from python-cmd.o. Updated
35 (py-frame.o): Renamed from python-frame.o. Updated references.
36 (py-function.o): Renamed from python-function.o. Updated references.
37 (py-objfile.o): Renamed from python-objfile.o. Updated references.
38 (py-prettyprint.o): Renamed from python-prettyprint.o. Updated
40 (py-type.o): Renamed from python-type.o. Updated references.
41 (py-utils.o): Renamed from python-utils.o. Updated references.
42 (py-value.o): Renamed from python-value.o. Updated references.
43 * py-cmd.c: Renamed from python-cmd.c.
44 * py-frame.c: Renamed from python-frame.c.
45 * py-function.c: Renamed from python-function.c.
46 * py-objfile.c: Renamed from python-objfile.c.
47 * py-prettyprint.c: Renamed from python-prettyprint.c.
48 * py-type.c: Renamed from python-type.c.
49 * py-utils.c: Renamed from python-utils.c.
50 * py-value.c: Renamed from python-value.c.
52 2009-09-08 Joel Brobecker <brobecker@adacore.com>
54 Avoid quadratic behavior when computing the value of a register.
55 * frame.c (frame_stash): New static constant.
56 (frame_stash_add, frame_stash_find, frame_stash_invalidate):
58 (get_frame_id): Minor reformatting. Add the frame to the frame stash.
59 (frame_find_by_id): Search the frame stash first before walking all
60 frames starting from te current_frame.
61 (reinit_frame_stash): Add call to frame_stash_invalidate ();
63 2009-09-08 Joel Brobecker <brobecker@adacore.com>
65 * block.c (contained_in): Return zero for nested functions.
66 * blockframe.c (block_innermost_frame): Delete unreferenced local
69 2009-09-08 Doug Evans <dje@google.com>
71 * target.c (initialize_targets): Fix thinko in stack_cache_enabled_p.
73 2009-09-08 Michael Snyder <msnyder@vmware.com>
75 * amd64-linux-tdep.h (enum amd64_syscall): New enum consts,
76 to replace literal consts used in amd64-linux-tdep.c
77 * linux-record.h (enum gdb_syscall): New enum consts, to replace
78 literal consts used in amd64-linux-tdep.c and linux-record.c.
79 * amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
80 translate from native amd64 Linux syscall id to internal gdb id.
81 (amd64_linux_syscall_record): Switch statement abstracted out
82 and replaced with a call to amd64_canonicalize_syscall.
83 * linux-record.c (record_linux_system_call): Replace literal
84 consts with enum consts.
85 * i386-linux-tdep.c (i386_canonicalize_syscall): New function,
86 trivially translate from native i386 Linux syscalls to gdb syscalls.
87 (i386_linux_intx80_sysenter_record):
89 2009-09-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
91 * gdb/Makefile.in (check//%): Parse 'config.status --version'
92 output to recreate the configuration from the testsuite directory,
93 rather than running 'config.status --recheck' from a different
94 build directory. Let configure do the recursion rather than
97 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
99 * ia64-tdep.c (ia64_memory_remove_breakpoint): Call do_cleanups
102 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
104 * ia64-tdep.c (ia64_memory_insert_breakpoint)
105 (ia64_memory_remove_breakpoint): Return immediately if any of memory
106 reads fail. Do not combine the VAL values.
108 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
110 Fix ia64 shadowing of breakpoints in multiple slots of a single bundle.
111 * ia64-tdep.c (ia64_memory_insert_breakpoint): New call
112 of make_show_memory_breakpoints_cleanup with parameter 0. Move the
113 reading of SHADOW_CONTENTS to this memory state point of code. Update
114 comment for the memory re-read.
116 2009-09-07 Michael Snyder <msnyder@vmware.com>
118 * record.c: Minor comment and white space fix-ups.
120 2009-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
122 * m68k-tdep.c (m68k_gdbarch_init): Allocate TDEP as cleared.
123 * sparc-tdep.c (sparc32_gdbarch_init): Allocate TDEP as cleared.
124 Remove explicit clearing of TDEP fields.
126 2009-09-06 Hui Zhu <teawater@gmail.com>
128 * i386-tdep.c (i386_record_check_override): Deleted.
129 (i386_record_lea_modrm): Ditto.
130 (i386_process_record): Ditto.
132 2009-09-05 Eli Zaretskii <eliz@gnu.org>
134 * config/djgpp/djconfig.sh: Fix for Autoconf 2.64.
135 * config/djgpp/config.sed: Fix for Autoconf 2.64.
137 2009-09-05 Hui Zhu <teawater@gmail.com>
139 * i386-tdep.c (i386_record_s): Add orig_addr.
140 (i386_record_check_override): New function.
141 (i386_record_lea_modrm): Call i386_record_check_override.
142 (i386_process_record): Ditto.
144 2009-09-03 Nathan Froyd <froydnj@codesourcery.com>
146 * dwarf2loc.c (struct piece_closure): New.
147 (allocate_piece_closure): New function.
148 (read_pieced_value): New function.
149 (write_pieced_value): New function.
150 (copy_pieced_value_closure): New function.
151 (free_pieced_value_closure): New function.
152 (pieced_value_funcs): Define.
153 (dwarf2_evaluate_loc_desc): Return a computed value for a variable
154 described with pieces.
156 2009-09-03 Pierre Muller <muller@ics.u-strasbg.fr>
157 Richard Earnshaw <rearnsha@arm.com>
159 * arm-tdep.c (displaced_write_reg): Replace call to abort by call
162 2009-09-02 Tom Tromey <tromey@redhat.com>
164 * frame.h (frame_unwinder_is): Declare.
165 * frame.c (frame_unwinder_is): New function.
166 * dwarf2loc.c: Include dwarf2-frame.h.
167 (dwarf_expr_frame_cfa): New function.
168 (dwarf2_evaluate_loc_desc): Use it.
169 (needs_frame_frame_cfa): New function.
170 (dwarf2_loc_desc_needs_frame): Use it.
171 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
173 * dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
175 * dwarf2-frame.h (dwarf2_frame_cfa): Declare.
176 * dwarf2-frame.c (no_get_frame_cfa): New function.
177 (execute_stack_op): Use it.
178 (dwarf2_frame_cfa): New function.
180 2009-09-02 Hui Zhu <teawater@gmail.com>
182 * record.c (record_resume): Change "signal" to "siggnal".
184 2009-09-01 Hui Zhu <teawater@gmail.com>
186 * record.c (record_resume): Change "siggnal" to "signal".
188 2009-09-01 Hui Zhu <teawater@gmail.com>
190 * record.c (record_resume_siggnal): Deleted.
191 (record_resume): Ditto.
192 (record_wait): Change record_resume_siggnal to
195 2009-08-31 Jacob Potter <jdpotter@google.com>
196 Doug Evans <dje@google.com>
198 Implement TARGET_OBJECT_STACK_MEMORY.
199 * NEWS: Add note on new "set stack-cache" option.
200 * corefile.c (read_stack): New function.
201 * dcache.c (dcache_struct): New member ptid.
202 (dcache_enable_p): Mark as obsolete.
203 (show_dcache_enabled_p): Flag option as deprecated.
204 (dcache_invalidate): Update ptid.
205 (dcache_invalidate_line): New function.
206 (dcache_read_line): No longer check cacheable attribute, stack
207 accesses get cached despite attribute.
208 (dcache_init): Set ptid.
209 (dcache_xfer_memory): Flush cache if from different ptid than before.
210 Update cache after write.
211 (dcache_update): New function.
212 (dcache_info): Report ptid.
213 (_initialize_dcache): Update text for `remotecache' to indicate it
215 * dcache.h (dcache_update): Declare.
216 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
218 * frame-unwind.c (frame_unwind_got_memory): Ditto.
219 * gdbcore.h (read_stack): Declare.
220 * memattr.c (mem_enable_command): Call target_dcache_invalidate
221 instead of dcache_invalidate.
222 (mem_disable_command, mem_delete_command): Ditto.
223 * target.c (stack_cache_enabled_p_1): New static global.
224 (stack_cache_enabled_p): New static global.
225 (set_stack_cache_enabled_p): New function.
226 (show_stack_cache_enabled_p): New function.
227 (target_dcache): Make static.
228 (target_dcache_invalidate): New function.
229 (target_load, target_resume): Call target_dcache_invalidate
230 instead of dcache_invalidate.
231 (memory_xfer_partial): New arg object, all callers updated.
232 Check for existing inferior before calling dcache routines.
233 When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
234 (target_xfer_partial): Call memory_xfer_partial for
235 TARGET_OBJECT_STACK_MEMORY.
236 (target_read_stack): New function.
237 (initialize_targets): Install new option `stack-cache'.
238 * target.h: Remove #include of dcache.h.
239 (enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
240 (target_dcache): Delete.
241 (target_dcache_invalidate): Declare.
242 (target_read_stack): Declare.
243 * top.c (prepare_execute_command): New function.
244 (execute_command): Call prepare_execute_command
245 instead of free_all_values.
246 * top.h (prepare_execute_command): Declare.
247 * valops.c (get_value_at): New function.
248 (value_at): Guts moved to get_value_at.
249 (value_at_lazy): Similarly.
250 (value_fetch_lazy): Call read_stack for stack values.
251 * value.c (struct value): New member `stack'.
252 (value_stack, set_value_stack): New functions.
253 * value.h (value_stack, set_value_stack): Declare.
254 * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
255 instead of free_all_values.
257 2009-08-29 Hui Zhu <teawater@gmail.com>
259 * i386-tdep.c (i386_process_record): Fix the error of string
260 ops instructions's handler.
262 2009-08-28 Doug Evans <dje@google.com>
264 * top.c (execute_command): Remove redundant comment.
266 2009-08-28 Daniel Jacobowitz <dan@codesourcery.com>
270 * value.c (value_primitive_field): Do not save value_offset for
272 (unpack_bits_as_long): Do not read an entire ULONGEST.
274 2009-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
276 Support constant DW_AT_data_member_location by GCC PR debug/40659.
278 (dwarf2_add_field <DW_TAG_member> <DW_AT_data_member_location>):
279 Initialize BYTE_OFFSET to 0 by default. Explicitly check if
281 (dwarf2_add_field <DW_TAG_inheritance> <DW_AT_data_member_location>)
282 (read_common_block <DW_AT_data_member_location>): New variable
283 byte_offset. Fix crash on non-DW_BLOCK ATTR values.
285 2009-08-28 Hui Zhu <teawater@gmail.com>
287 * record.c (record_list_release_next): Change the first
288 record_reg to record_end.
290 2009-08-27 Doug Evans <dje@google.com>
292 * value.c (free_all_values): Tweak comment.
294 * NEWS: Add note on "info sharedlibrary".
295 Remove note on "set print symbol-loading".
296 * main.c (captured_main): Pass !batch for from_tty when calling
297 symbol_file_add_main.
298 * objfiles.h (objfile_has_partial_symbols): Declare.
299 (objfile_has_full_symbols): Declare.
300 * objfiles.c (objfile_has_partial_symbols): New function.
301 (have_partial_symbols): Use it.
302 (objfile_has_full_symbols): New function.
303 (have_full_symbols): Use it.
304 * solib.c: Include interps.h.
305 (solib_read_symbols): Back out patch of 2008-07-10.
306 Add test for info_verbose for symbol loading messages for
307 consistency with symfile.c.
308 (info_sharedlibrary_command): Handle optional parameter of regex of
309 libraries to list. Inform user of libraries without debugging info.
310 Rewrite to use ui_out routines to format output.
311 * symfile.c (print_symbol_loading): Delete.
312 (symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
313 Print "no debugging symbols found" only if from_tty || info_verbose;
314 and only check file being loaded, not all files.
315 (reread_symbols): Test file being loaded for whether it has symbols,
317 (__initialize_symfile): Delete `set print symbol-loading'.
318 * symfile.h (print_symbol_loading): Delete.
320 2009-08-27 Jan Kratochvil <jan.kratochvil@redhat.com>
322 * varobj.c (varobj_create): Error if the specified frame was not found
325 2009-08-26 Michael Snyder <msnyder@vmware.com>
327 * i386-tdep.c (i386_process_record): Break out of prefix loop
328 if not amd64. Otherwise inc/dec instructions are lost.
330 2009-08-25 Keith Seitz <keiths@redhat.com>
332 * c-exp.y (yylex): Add cxx_only check for tokentab2 and tokentab3
334 (tokentab3): Add cxx_only for DOT_STAR.
336 2009-08-25 Pedro Alves <pedro@codesourcery.com>
338 * inferior.c (print_inferior): Align columns left. Remove header
339 for the the "current" column. Rename column "Id" to "Num".
340 Rename column "PID" to "Description". Print if there's no selected
343 2009-08-25 Jan Kratochvil <jan.kratochvil@redhat.com>
345 Fix ia64 start crash when GDB built with -lmcheck.
346 * ia64-tdep.c (ia64_gdbarch_init): Allocate TDEP as cleared. Remove
347 specific clearing of TDEP SIGCONTEXT_REGISTER_ADDRESS and
350 2009-08-24 Keith Seitz <keiths@redhat.com>
352 * c-exp.y (tokentab3): Add new token, ARROW_STAR. Changed all users.
353 (tokentab2): Add new token, DOT_STAR. Changed all users.
355 2009-08-24 Keith Seitz <keiths@redhat.com>
357 * symtab.c (default_make_symbol_completion_list): Keep
358 ':', too, so that we can limit searches in namespaces
361 2009-08-24 Tom Tromey <tromey@redhat.com>
363 * python/python-value.c (valpy_richcompare): Don't return from
366 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
368 * CONTRIBUTE: Bump documented Autoconf version.
369 * configure.ac: Do not substitute datarootdir, htmldir,
370 pdfdir, docdir. Do not process --with-datarootdir,
371 --with-htmldir, --with-pdfdir, --with-docdir.
372 * configure: Regenerate.
374 * aclocal.m4: Regenerate.
375 * config.in: Likewise.
376 * configure: Likewise.
377 * gnulib/Makefile.in: Likewise.
379 * configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
380 AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.
382 2009-08-21 Paul Pluzhnikov <ppluzhnikov@google.com>
384 * objfiles.h (gdb_bfd_ref): New prototype.
385 * objfiles.c (gdb_bfd_ref): New function.
386 (allocate_objfile): Call it.
387 (gdb_bfd_unref): Adjust assertion.
388 * solib.c (solib_map_sections): Add reference.
389 (symbol_add_stub): Don't add reference here.
390 * symfile.c (reread_symbols): Add reference.
392 2009-08-21 Ken Werner <ken@linux.vnet.ibm.com>
393 Doug Evans <dje@google.com>
395 * jit.c (jit_event_handler): Use paddress to print target addresses.
396 Wrap printf string in _().
398 2009-08-21 Doug Evans <dje@google.com>
400 * jit.c (jit_read_descriptor): New arg gdbarch, all callers updated.
401 (jit_read_code_entry, jit_register_code): Ditto.
402 (jit_event_handler): Ditto.
403 (jit_inferior_init): Renamed from previous jit_inferior_created_hook.
404 (jit_inferior_created_hook, jit_breakpoint_re_set): New functions.
405 (jit_inferior_created_observer): Renamed from
406 jit_inferior_created_hook1, all callers updated.
407 * jit.h (jit_breakpoint_re_set): Declare.
408 (jit_event_handler): Update prototype.
409 * breakpoint.c (breakpoint_re_set): Call jit_breakpoint_re_set instead
410 of jit_inferior_created_hook.
412 2009-08-21 Hui Zhu <teawater@gmail.com>
414 * record.c (record_wait): Change the argument of
415 record_beneath_to_wait to options.
417 2009-08-20 Jacob Potter <jdpotter@google.com>
419 Replace dcache with splay tree.
420 Remove partially implemented writeback support.
421 * dcache.c: Include splay-tree.h.
422 (LINE_SIZE_POWER): Change from 5 to 6.
423 (DCACHE_SIZE): Change from 64 to 4096.
424 (ENTRY_INVALID, ENTRY_VALID, ENTRY_DIRTY): Delete.
425 (state_chars): Delete.
426 (struct dcache_block): Clean up; remove state and anydirty fields.
427 (struct dcache_struct): Redefine as a splay tree and linked list.
428 (last_cache): Make static.
429 (dcache_invalidate, dcache_hit): Rewrite for new cache structure.
430 (dcache_read_line, dcache_alloc): Rewrite for new cache structure.
431 (dcache_write_line): Delete.
432 (dcache_writeback): Delete.
433 (dcache_peek_byte): Clean up; remove "invalid" state check.
434 (dcache_poke_byte): Rewrite for new cache structure; clarify comment.
435 (dcache_splay_tree_compare): New function.
436 (dcache_init, dcache_free): Rewrite for new cache structure.
437 (dcache_xfer_memory): Rewrite for new write-through cache structure.
438 (dcache_print_line): New function.
439 (dcache_info): Rewrite for new cache structure.
440 (_initialize_dcache): Update "info dcache" help text.
441 * dcache.h (dcache_xfer_memory): Update declaration.
442 * target.c (memory_xfer_partial): Update calls to dcache_xfer_memory.
444 2009-08-19 Reid Kleckner <reid@kleckner.net>
446 Add interface for JIT code generation.
447 * NEWS: Announce JIT interface.
448 * Makefile.in (SFILES): Add jit.c.
449 (HFILES_NO_SRCDIR): Add jit.h.
450 (COMMON_OBS): Add jit.o.
453 * breakpoint.h (enum bptype): Add bp_jit_event to enum.
455 (update_breakpoints_after_exec): Delete jit breakpoints after exec.
456 (bpstat_what): Update event table for bp_jit_event.
457 (print_it_typical): Added case for bp_jit_event.
458 (print_one_breakpoint_location): Added case for bp_jit_event.
459 (allocate_bp_location): Added case for bp_jit_event.
460 (mention): Added case for bp_jit_event.
461 (delete_command): Added case for bp_jit_event.
462 (breakpoint_re_set_one): Added case for bp_jit_event.
463 (breakpoint_re_set): Added call to jit_inferior_created_hook.
464 (create_jit_event_breakpoint): New.
465 * infrun.c (handle_inferior_event): Add handler for jit event.
466 (follow_exec): Add call to jit_inferior_created_hook.
468 2009-08-19 Ulrich Weigand <uweigand@de.ibm.com>
470 * value.c (enum internalvar_kind): Replace INTERNALVAR_SCALAR by
471 INTERNALVAR_INTEGER and INTERNALVAR_POINTER.
472 (union internalvar_data): Replace "scalar" member by "integer"
474 (value_of_internalvar): Handle INTERNALVAR_INTEGER and
475 INTERNALVAR_POINTER instead of INTERNALVAR_SCALAR.
476 (get_internalvar_integer): Likewise.
477 (set_internalvar): Likewise.
478 (set_internalvar_integer): Likewise.
479 (preserve_one_internalvar): Likewise.
480 (value_from_pointer): Handle typedef'd pointer types.
482 2009-08-18 Tom Tromey <tromey@redhat.com>
484 * utils.c (add_internal_problem_command): Free set_doc and
486 * remote.c (add_packet_config_cmd): Free set_doc and show_doc.
487 * language.c (add_language): Free language_set_doc.
489 2009-08-18 Tom Tromey <tromey@redhat.com>
491 * Makefile.in (ALL_TARGET_OBS): Remove prologue-value.o, solib.o.
493 2009-08-17 Ulrich Weigand <uweigand@de.ibm.com>
495 * symfile.c (reread_symbols): Call objfiles_changed *before*
496 calling clear_symtab_users.
498 2009-08-17 Michael Snyder <msnyder@vmware.com>
500 * amd64-tdep.c: Add a frame unwinder for function epilogues.
501 (amd64_in_function_epilogue_p): New function.
502 (amd64_epilogue_frame_sniffer): New function.
503 (amd64_epilogue_frame_cache): New function.
504 (amd64_epilogue_frame_this_id): New function.
505 (amd64_epilogue_frame_unwind): New struct frame_unwind.
506 (amd64_init_abi): Hook the new unwinder.
508 * amd64-linux-tdep.c (amd64_linux_init_abi): Set gdbarch to use
509 SVR4 method for skip_trampoline_code.
511 2009-08-17 Pedro Alves <pedro@codesourcery.com>>
513 * objfiles.c (objfile_relocate): Relocate the entry point before
514 relocating the section offsets. Flush the section map before
515 resetting breakpoints.
517 2009-08-14 Doug Evans <dje@google.com>
519 * symfile.c (find_separate_debug_file): Remove double free of
522 2009-08-14 Pedro Alves <pedro@codesourcery.com>
524 * top.c (any_thread_of): Delete.
525 (kill_or_detach): Use any_thread_of_process.
526 * top.c (print_inferior_quit_action): New.
527 (quit_confirm): Rewrite to print info about all inferiors.
528 * target.c (dispose_inferior): New.
529 (target_preopen): Use it.
531 2009-08-14 Pedro Alves <pedro@codesourcery.com>
533 * ui-file.h (ui_file_xstrdup): Mention that the length argument
535 * ui-file.c (ui_file_xstrdup): Don't dereference LENGTH if it is
537 * aix-thread.c (aix_thread_extra_thread_info): Pass NULL as length
538 parameter to ui_file_xstrdup.
539 * arm-tdep.c (_initialize_arm_tdep): Ditto.
540 * infrun.c (print_target_wait_results): Ditto.
541 * language.c (add_language): Ditto.
542 * linespec.c (cplusplus_error): Ditto.
543 * remote.c (escape_buffer): Ditto.
544 * typeprint.c (type_to_string): Ditto.
545 * utils.c (error_stream): Ditto.
546 * varobj.c (value_get_print_value): Ditto.
547 * xtensa-tdep.c (xtensa_verify_config): Replace `dummy' local with
548 `length' local. Pass it to ui_file_xstrdup, and avoid an strlen
550 * gdbarch.sh (verify_gdbarch): Ditto.
551 * gdbarch.c: Regenerate.
552 * cli/cli-setshow.c (do_setshow_command): Pass NULL as length
553 parameter to ui_file_xstrdup.
554 * python/python-frame.c (frapy_str): Ditto.
555 * python/python-type.c (typy_str): Use the length local instead of
557 * python/python-value.c (valpy_str): Pass NULL as length parameter
560 2009-08-13 Doug Evans <dje@google.com>
562 * utils.c (gnu_debuglink_crc32): Store crc32_table as unsigned int
563 instead of unsigned long.
565 2009-08-13 Tom Tromey <tromey@redhat.com>
567 * varobj.c (update_dynamic_varobj_children): Don't use
569 * value.h: (preserve_one_value): Declare.
570 (value_prepend_to_list, value_remove_from_list): Remove.
571 * value.c (preserve_one_value): No longer static.
572 (preserve_values): Call preserve_python_values.
573 (value_prepend_to_list): Remove.
574 (value_remove_from_list): Remove.
575 * python/python.h (values_in_python): Don't declare.
576 (preserve_python_values): Declare.
577 * python/python-value.c (values_in_python): Change type. Move
579 (struct value_object): Add struct tag.
580 <next, prev>: New fields.
581 (valpy_dealloc): Update.
582 (note_value): New function.
583 (valpy_new): Use value_incref, note_value.
584 (preserve_python_values): New function.
585 (valpy_positive): Don't use value_copy.
586 (value_to_value_object): Use value_incref, note_value.
587 (convert_value_from_python): Update comment.
589 2009-08-13 Pedro Alves <pedro@codesourcery.com>
591 * remote.c (remote_pid_to_str): If printing a process id and we
592 don't know what the remote pid could be, output "Remote target";
593 otherwise, use normal_pid_to_str.
595 2009-08-13 Tom Tromey <tromey@redhat.com>
597 * language.h (longest_raw_hex_string): Remove unused declaration.
599 2009-08-13 Pedro Alves <pedro@codesourcery.com>
603 * language.c (language, type, range, case_sensitive): Make const.
604 (show_language_command): Don't call deprecated_show_value_hack.
606 (set_language_command): An unrecognized language is now an
607 internal error instead of a user error. Don't call set_lang_str.
608 (show_type_command): Don't call deprecated_show_value_hack.
609 Special case "auto". Use warning.
610 (set_type_command): An unrecognized type is now an internal error
611 instead of a user error. Output type check mismatch with language
612 here. Don't call set_type_str.
613 (show_range_command): Don't call deprecated_show_value_hack.
614 Special case "auto". Use warning.
615 (set_range_command): An unrecognized range check is now an
616 internal error instead of a warning. Output range check mismatch
617 with language here. Don't call set_range_str.
618 (show_case_command): Don't call deprecated_show_value_hack.
619 Special case "auto". Use warning.
620 (set_case_command): Don't call set_case_str. An unrecognized case
621 check is now an internal error instead of a warning. Output range
622 check mismatch with language here. Don't call set_case_str.
623 (set_type_range_case): Don't call set_type_str, set_range_str or
625 (set_lang_str, set_type_str, set_range_str, set_case_str): Delete.
626 (add_language): Install or reinstall the "set language" command
627 here, and make it an enum command. Build the enumeration and the
628 help string from the current list of known languages.
629 (_initialize_language): Don't install "set language" here. Make
630 "set check type", "set check range" and "set case-sensitive" enum
631 commands. Register the "auto" "local" and "unknown" languages in
634 2009-08-13 Pedro Alves <pedro@codesourcery.com>
636 Revert 2009-08-07 changes for PR gdb/8869:
638 * language.c (set_language_command): Strip whitespace.
639 (set_type_command): Likewise.
640 (set_range_command): Likewise.
642 * language.c (language_completer): New function.
643 (range_or_type_completer): New function.
644 (case_completer): New function.
645 (_initialize_language): Set completers.
646 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
648 (add_setshow_string_noescape_cmd): Likewise.
649 (add_setshow_integer_cmd): Likewise.
650 (add_setshow_uinteger_cmd): Likewise.
651 (add_setshow_zinteger_cmd): Likewise.
652 (add_setshow_zuinteger_cmd): Likewise.
653 * command.h (add_setshow_string_cmd,
654 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
655 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
657 2009-08-12 Michael Snyder <msnyder@vmware.com>
659 * remote.c (remote_add_inferior): Remove unused local.
660 (remote_add_thread): Ditto.
662 (remote_current_thread): Ditto.
663 (remote_stop_ns): Ditto.
664 (remote_parse_stop_reply): Ditto.
665 (remote_get_pending_stop_replies): Ditto.
666 (remote_wait_ns): Ditto.
667 (remote_wait_as): Ditto.
668 (send_g_packet): Ditto.
669 (remote_fetch_registers): Ditto.
670 (store_register_using_P): Ditto.
671 (remote_store_registers): Ditto.
672 (remote_remove_breakpoint): Ditto.
673 (remote_write_qxfer): Ditto.
674 (remote_read_qxfer): Ditto.
676 2009-08-11 Tom Tromey <tromey@redhat.com>
678 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Make a cleanup.
679 (dwarf2_loc_desc_needs_frame): Likewise.
680 * dwarf2expr.h (make_cleanup_free_dwarf_expr_context): Declare.
681 * dwarf2expr.c (free_dwarf_expr_context_cleanup): New function.
682 (make_cleanup_free_dwarf_expr_context): Likewise.
683 * dwarf2-frame.c (execute_stack_op): Make a cleanup.
685 2009-08-10 Jan Kratochvil <jan.kratochvil@redhat.com>
687 * objfiles.c (gdb_bfd_unref): Use the bfd_usrdata accessor.
688 * solib.c (symbol_add_stub): Likewise.
689 * symfile.c (symfile_bfd_open): Assert BFD_USRDATA is NULL.
691 2009-08-10 Paul Pluzhnikov <ppluzhnikov@google.com>
693 * objfiles.c (qsort_cmp): Remove assert.
694 (preferred_obj_section): New function.
695 (update_section_map): Filter duplicates.
697 2009-08-10 Tristan Gingold <gingold@adacore.com>
699 * solib-darwin.c (find_program_interpreter): Simplify the code by
700 looking up for the load_dylinker command instead of reading the
701 corresponding (but deprecated) section.
702 (darwin_solib_create_inferior_hook): Adjust: do not free the
705 2009-08-10 Tristan Gingold <gingold@adacore.com>
707 * i386-darwin-tdep.c (i386_m128_p): New function.
708 (i386_darwin_arg_type_alignment): Ditto.
709 (i386_darwin_push_dummy_call): Ditto.
710 (i386_darwin_init_abi): Define Darwin specific push_dummy_call.
711 Adjust long_double size. Adjust pc offset in setjump buffer.
713 2009-08-10 Hui Zhu <teawater@gmail.com>
715 Add Linux AMD64 process record support.
717 * amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
718 This struct has the argument for the function
719 "record_linux_system_call".
720 (amd64_linux_syscall_record): New function. Parse the
721 system call instruction and call function
722 "record_linux_system_call" to record execute log.
723 (i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
724 Set "amd64_linux_syscall_record" to "i386_syscall_record".
726 2009-08-10 Hui Zhu <teawater@gmail.com>
728 Add process record Linux system call 64 bits support.
730 * linux-record.h (linux_record_tdep): Add size_pointer,
731 size_size_t, size_iovec and arg6. Change the values of
732 size_int, size_long and size_ulong to
733 gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
734 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
735 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
736 * i386-linux-tdep.c (i386_linux_init_abi): Ditto.
737 (i386_linux_intx80_sysenter_record): Add a check for system
739 * linux-record.c (record_linux_system_call): Make this
740 function support 64 bits.
742 2009-08-10 Hui Zhu <teawater@gmail.com>
744 Add AMD64 process record instruction set support.
746 * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
747 because the AMD64's registers order in GDB is not same with
749 Add i386_syscall_record to be the syscall function handle
751 (record_i386_regnum): Number for record_regmap.
752 * i386-tdep.c (OT_QUAD): For 64 bits.
753 (i386_record_s): Add rex_x, rex_b, rip_offset and
754 popl_esp_hack for AMD64 instruction set. And regmap for
756 (i386_record_lea_modrm_addr): Support AMD64 instruction set
758 (i386_record_lea_modrm): Ditto.
759 (i386_record_push): New function. Record the execution log
761 (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
763 (i386_process_record): Support AMD64 instruction set.
764 * amd64-tdep.c (amd64_record_regmap): For record_regmap.
765 (amd64_init_abi): Set amd64_record_regmap to record_regmap.
767 2009-08-08 Pedro Alves <pedro@codesourcery.com>
769 * bfd-target.c (struct target_bfd_data): New.
770 (target_bfd_xfer_partial): Adjust to get at the section table from
772 (target_bfd_get_section_table): Ditto.
773 (target_bfd_xclose): Ditto. Get the bfd pointer from the
774 target_bfd_data structure, from the section table.
775 (target_bfd_reopen): Store a struct target_bfd_data in the
776 target_ops to_data field, instead of a target_section_table.
778 2009-08-08 Aleksandar Ristovski <aristovski@qnx.com>
779 Hui Zhu <teawater@gmail.com>
781 * record.c (record_store_registers): Remove unused variable.
783 2009-08-07 Tom Tromey <tromey@redhat.com>
785 * language.c (set_language_command): Strip whitespace.
786 (set_type_command): Likewise.
787 (set_range_command): Likewise.
789 2009-08-07 Tom Tromey <tromey@redhat.com>
792 * language.c (language_completer): New function.
793 (range_or_type_completer): New function.
794 (case_completer): New function.
795 (_initialize_language): Set completers.
796 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
798 (add_setshow_string_noescape_cmd): Likewise.
799 (add_setshow_integer_cmd): Likewise.
800 (add_setshow_uinteger_cmd): Likewise.
801 (add_setshow_zinteger_cmd): Likewise.
802 (add_setshow_zuinteger_cmd): Likewise.
803 * command.h (add_setshow_string_cmd,
804 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
805 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
807 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
810 * dwarf2-frame.c (qsort_fde_cmp): Use stable sort.
812 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
814 * dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
815 (struct dwarf2_cie_table): New.
816 (struct dwarf2_fde): Remove 'next'.
817 (struct dwarf2_fde_table): New.
818 (struct comp_unit): Remove 'cie'.
819 (bsearch_cie_cmp, bsearch_fde_cmp): New function.
820 (find_cie, dwarf2_frame_find_fde): Use bsearch.
821 (add_cie, add_fde): Use array instead of linked list.
822 (decode_frame_entry, decode_frame_entry_1): New parameters.
823 (qsort_fde_cmp): New function.
824 (dwarf2_build_frame_info): Adjust.
826 2009-08-06 Don Lee <don.lee@sunplusct.com>
828 * score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
829 * score-tdep.h: Ditto.
831 * configure.tgt: Test do we have a simulator.
832 * MAINTAINERS: Add myself under target score
834 2009-08-06 Nick Roberts <nickrob@snap.net.nz>
836 * utils.c (defaulted_query): Don't ask for confirmation if server
839 2009-08-05 Tom Tromey <tromey@redhat.com>
841 * spu-tdep.h (SPUADDR_SPU): Cast result to int.
843 2009-08-04 Paul Pluzhnikov <ppluzhnikov@google.com>
845 * objfiles.h (OBJF_KEEPBFD): Delete.
846 (gdb_bfd_unref): New prototype.
847 * objfiles.c (gdb_bfd_unref): New function.
848 (free_objfile): Call gdb_bfd_unref.
849 * solib.c (free_so): Likewise.
850 (symbol_add_stub): Set refcount.
852 2009-08-04 Hui Zhu <teawater@gmail.com>
853 Michael Snyder <msnyder@vmware.com>
855 * record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
856 (record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
857 (record_wait): Set 'mem_entry_not_accessible' flag if target
858 memory not readable. Don't try to change target memory if
859 'mem_entry_not_accessible' is set.
861 2009-08-03 Richard Guenther <rguenther@suse.de>
862 Jan Kratochvil <jan.kratochvil@redhat.com>
864 Fix memory corruption on reread of file through a symbolic link.
865 * symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
866 Allocate DEBUGFILE with length based on CANON_NAME. Free CANON_NAME on
867 all the return paths.
869 2009-08-03 Jim Ingham <jingham@apple.com>
870 Vladimir Prus <vladimir@codesourcery.com>
872 Implement -break-commands
874 * breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
875 (commands_command): Use breakpoint_set_commands.
876 * breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
878 * mi/mi-cmds.h (mi_cmd_break_commands): New.
879 * mi/mi-cmds.c: Register -break-commands.
880 * mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
881 (mi_command_line_array, mi_command_line_array_cnt)
882 (mi_command_line_array_ptr): New.
884 2009-08-03 Jim Ingham <jingham@apple.com>
885 Vladimir Prus <vladimir@codesourcery.com>
887 Refactor reading of commands
889 * defs.h (read_command_lines_1): Declare.
890 * cli/cli-script.c (read_next_line): Only return string,
892 (process_next_line): New, extracted from read_next_line.
893 (recurse_read_control_structure): Take a function pointer to the
895 (get_command_line) Pass the read_next_line as reader function
896 into recurse_read_control_structure.
897 (read_command_lines_1): New, extracted from...
898 (read_command_lines): ...here.
900 2009-07-31 Kazu Hirata <kazu@codesourcery.com>
902 * procfs.c (proc_set_current_signal): Populate mysinfo before
904 (proc_clear_current_signal): Likewise.
905 (proc_set_watchpoint): Populate pwatch before copying it to arg.
907 2009-07-31 Michael Snyder <msnyder@vmware.com>
909 * remote.c (store_register_using_P): Call putpkt and getpkt
910 directly instead of calling remote_send.
911 (store_registers_using_G): Ditto.
912 (fetch_register_using_p): Ditto.
914 * remote.c (store_register_using_P): Make error msg more verbose.
915 (store_registers_using_G): Ditto.
916 (fetch_register_using_p): Ditto.
918 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
920 * spu-tdep.c: Include "infcall.h".
921 (spu_address_class_type_flags): New function.
922 (spu_address_class_type_flags_to_name): Likewise.
923 (spu_address_class_name_to_type_flags): Likewise.
924 (spu_pointer_to_address): Handle __ea pointers.
925 (spu_auto_flush_cache_p): New static variable.
926 (spu_objfile_from_frame): New function.
927 (flush_ea_cache, spu_attach_normal_stop): Likewise.
928 (show_spu_auto_flush_cache): Likewise.
929 (spu_gdbarch_init): Install address class handlers.
930 (_initialize_spu_tdep): Attach to normal_stop observer.
931 Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
934 * NEWS: Mention "set/show spu auto-flush-cache" commands.
936 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
938 * spu-tdep.c: Include "block.h".
939 (setspucmdlist, showspucmdlist): New static variables.
940 (spu_stop_on_load_p): Likewise.
941 (spu_catch_start): New function.
942 (show_spu_command, set_spu_command): New functions.
943 (show_spu_stop_on_load): Likewise.
944 (_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
945 Install "set spu" / "show spu" prefix command handler.
946 Install "set spu stop-on-load" / "show spu stop-on-load" command.
948 * NEWS: Mention "set/show spu stop-on-load" commands.
950 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
952 * ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
953 "arch-utils.h", and "spu-tdep.h".
954 (spu_context_objfile, spe_context_lm_addr, spe_context_offset):
955 New static variables.
956 (spe_context_cache_ptid, spe_context_cache_address): Likewise.
957 (ppc_linux_spe_context_lookup): New function.
958 (ppc_linux_spe_context_inferior_created): Likewise.
959 (ppc_linux_spe_context_solib_loaded): Likewise.
960 (ppc_linux_spe_context_solib_unloaded): Likewise.
961 (ppc_linux_spe_context): Likewise.
962 (struct ppu2spu_cache, struct ppu2spu_data): New data types.
963 (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
964 ppu2spu_unwind_register, ppu2spu_sniffer,
965 ppu2spu_dealloc_cache): New functions.
966 (ppu2spu_unwind): New static variable.
967 (ppc_linux_init_abi): Install cross-architecture unwinder.
968 (_initialize_ppc_linux_tdep): Attach to observers.
970 * spu-tdep.c (struct spu2ppu_cache): New data type.
971 (spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
972 spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
973 (spu2ppu_unwind): New static variable.
974 (spu_gdbarch_init): Install cross-architecture unwinder.
976 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
978 * target.h (enum strata): New value arch_stratum.
979 * target.c (target_require_runnable): Skip arch_stratum targets.
981 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
982 solib-spu.o and spu-multiarch.o to gdb_target_obs.
983 * Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
984 (ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
986 * solib-spu.c: New file.
987 * solib-spu.h: New file.
988 * spu-multiarch.c: New file.
990 * spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
992 * spu-tdep.c (struct gdbarch_tdep): New member id.
993 (spu_gdbarch_id): New function.
994 (spu_lslr): New function.
996 (spu_address_to_pointer): New function.
997 (spu_pointer_to_address): Support SPU ID address encoding. Use
998 spu_gdbarch_id and spu_lslr.
999 (spu_integer_to_address): Likewise.
1000 (spu_frame_unwind_cache): Update for encoded addresses.
1001 (spu_unwind_pc, spu_unwind_sp): Likewise.
1002 (spu_read_pc, spu_write_pc): Likewise.
1003 (spu_push_dummy_call): Likewise.
1004 (spu_software_single_step): Likewise.
1005 (spu_get_longjmp_target): Likewise.
1006 (spu_overlay_update_osect): Likewise.
1008 (spu_dis_asm_print_address): New function.
1009 (gdb_print_insn_spu): Likewise.
1011 (spu_gdbarch_init): Store SPU ID in tdep structure.
1012 Install spu_address_to_pointer and gdb_print_insn_spu.
1014 * ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
1016 (ppc_linux_entry_point_addr): New static variable.
1017 (ppc_linux_inferior_created): New function.
1018 (ppc_linux_displaced_step_location): Likewise.
1019 (ppc_linux_init_abi): Enable Cell/B.E. support if supported
1021 (_initialize_ppc_linux_tdep): Attach to inferior_created observer.
1023 * NEWS: Mention multi-architecture and Cell/B.E. debugging
1026 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1028 * linux-nat.c: Include <sys/vfs.h>.
1029 (SPUFS_MAGIC): Define.
1030 (spu_enumerate_spu_ids): New function.
1031 (linux_proc_xfer_spu): New function.
1032 (linux_xfer_partial): Handle TARGET_OBJECT_SPU.
1034 (iterate_over_spus): New function.
1035 (struct linux_spu_corefile_data): New data type.
1036 (linux_spu_corefile_callback): New function.
1037 (linux_spu_make_corefile_notes): New function.
1038 (linux_nat_make_corefile_notes): Call it.
1040 * corelow.c (struct spuid_list): New data type.
1041 (add_to_spuid_list): New function.
1042 (core_xfer_partial): Handle TARGET_OBJECT_SPU.
1044 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1046 * features/Makefile: Allow sub-platform specific expedite settings.
1047 (WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
1048 (rs6000/powerpc-cell32l-expedite): Define.
1049 (rs6000/powerpc-cell64l-expedite): Likewise.
1050 * features/rs6000/powerpc-cell32l.xml: New file.
1051 * features/rs6000/powerpc-cell64l.xml: New file.
1052 * features/rs6000/powerpc-cell32l.c: New generated file.
1053 * features/rs6000/powerpc-cell64l.c: New generated file.
1055 * regformats/rs6000/powerpc-cell32l.dat: New generated file.
1056 * regformats/rs6000/powerpc-cell64l.dat: New generated file.
1058 * config/djgpp/fnchange.lst: Add mappings for new files.
1060 * ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
1061 (tdesc_powerpc_cell64l): Likewise.
1062 * ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
1063 and "features/rs6000/powerpc-cell64l.c".
1064 (_initialize_ppc_linux_tdep): Initialize target descriptions.
1065 (ppc_linux_spu_section): New function.
1066 (ppc_linux_core_read_description): Detect Cell/B.E. core files.
1067 * ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
1068 (ppc_linux_read_description): Detect Cell/B.E. architecture.
1070 * rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
1071 if exec file is not PowerPC architecture.
1073 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1075 * features/gdb-target.dtd (target): Accept optional
1076 <compatible> elements.
1077 (compatible): Define element.
1079 * target-descriptions.h (tdesc_compatible_p): New.
1080 (tdesc_add_compatible): New.
1081 * target-descriptions.c (arch_p): New VEC_P type.
1082 (struct target_desc): New member compatible.
1083 (free_target_description): Handle it.
1084 (maint_print_c_tdesc_cmd): Likewise.
1085 (tdesc_compatible_p): New function.
1086 (tdesc_add_compatible): New function.
1088 * xml-tdesc.c (tdesc_end_compatible): New function.
1089 (target_children): Handle <compatible> element.
1091 * arch-utils.c (choose_architecture_for_target): Accept target
1092 description instead of BFD architecture as input. Query target
1093 description for compatible architectures.
1094 (gdbarch_info_fill): Update call.
1096 * NEWS: Mention <compatible> element of target descriptions.
1098 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1100 * breakpoint.c (remove_breakpoints): If removing one breakpoint
1101 location fails, still continue to remove other locations.
1102 (remove_hw_watchpoints): Likewise.
1103 (detach_breakpoints): Likewise.
1105 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1107 * breakpoint.h (enum enable_state): Add bp_startup_disabled.
1108 (disable_breakpoints_before_startup): Add prototype.
1109 (enable_breakpoints_after_startup): Likewise.
1111 * breakpoint.c (executing_startup): New static variable.
1112 (describe_other_breakpoints): Handle bp_startup_disabled.
1113 (check_duplicates_for): Likewise.
1114 (disable_breakpoints_before_startup): New function.
1115 (enable_breakpoints_after_startup): New function.
1116 (create_breakpoint): Mark new breakpoints as bp_startup_disabled
1117 if executing_startup flag is true.
1118 (break_command_really): Likewise.
1119 (breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
1121 2009-07-31 Julian Brown <julian@codesourcery.com>
1123 * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
1125 (arm_linux_cleanup_svc, arm_linux_copy_svc): New.
1126 (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
1127 (arm_linux_displaced_step_copy_insn): New.
1128 (arm_linux_init_abi): Initialise displaced stepping callbacks.
1129 * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
1131 (displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
1132 (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
1133 (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
1134 (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
1135 (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
1136 (copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
1137 (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
1138 (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
1139 (cleanup_block_load_all, cleanup_block_store_pc)
1140 (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
1141 (copy_undef, copy_unpred): New.
1142 (decode_misc_memhint_neon, decode_unconditional)
1143 (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
1144 (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
1145 (decode_svc_copro, arm_process_displaced_insn)
1146 (arm_displaced_init_closure, arm_displaced_step_copy_insn)
1147 (arm_displaced_step_fixup): New.
1148 (arm_gdbarch_init): Initialise max insn length field.
1149 * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
1151 (displaced_step_closure, pc_write_style): New.
1152 (arm_displaced_init_closure, displaced_read_reg)
1153 (arm_process_displaced_insn, arm_displaced_init_closure)
1154 (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
1155 (arm_displaced_step_fixup): Add prototypes.
1157 2009-07-31 Pedro Alves <pedro@codesourcery.com>
1158 Julian Brown <julian@codesourcery.com>
1160 * infrun.c (displaced_step_fixup): If this is a software
1161 single-stepping arch, don't tell the target to single-step.
1162 (maybe_software_singlestep): Return 0 if we're using displaced
1164 (resume): If this is a software single-stepping arch, and
1165 displaced-stepping is enabled, use it for all single-step
1168 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1170 * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
1171 (AUTOCONF, configure_deps, AUTOHEADER): New variables.
1172 ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
1173 (am--refresh): New rules.
1174 (stamp-h, config.status): List config.in and configure including
1176 * aclocal.m4: Regenerate.
1177 * configure: Regenerate.
1179 2009-07-30 Thomas Schwinge <tschwinge@gnu.org>
1181 * gnu-nat.c (add_task_commands) <stopped>: Register the correct
1184 2009-07-30 H.J. Lu <hongjiu.lu@intel.com>
1186 * ia64-tdep.c (ia64_access_reg): Correct paddress.
1188 2009-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1190 Replace public function varobj_list by all_root_varobjs iterator.
1191 * mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
1193 (mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
1194 Remove the variables rootlist, cr. New variable data.
1195 * varobj.c (rootcount, varobj_list): Remove.
1196 (install_variable, uninstall_variable): Remove the rootcount updates.
1197 (all_root_varobjs): New function.
1198 (varobj_invalidate): Use the all_root_varobjs call. Move the code to...
1199 (varobj_invalidate_iter): ... a new function.
1200 * varobj.h (varobj_list): Remove the prototype.
1201 (all_root_varobjs): New prototype.
1203 2009-07-29 Paul Pluzhnikov <ppluzhnikov@google.com>
1206 * dbxread.c (read_dbx_symtab): Reduce stack use.
1208 2009-07-29 Jan Kratochvil <jan.kratochvil@redhat.com>
1210 Fix gcc-4.5 HEAD warnings.
1211 * cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
1212 (GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
1214 (yylex <"global constructors keyed to ">)
1215 (yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
1216 (cp_comp_to_string): Remove variables str, prefix and buf. Remove the
1217 GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
1218 (cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
1221 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1223 * NEWS: Mention ARM VFP support.
1224 * target-descriptions.c (tdesc_register_type): Make public.
1225 (tdesc_unnumbered_register): New function.
1226 (tdesc_register_reggroup_p): Allow missing
1227 pseudo_register_reggroup_p.
1228 * target-descriptions.h (tdesc_register_type): Declare.
1229 (tdesc_unnumbered_register): Declare.
1230 * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
1231 (arm_push_dummy_call): Use arm_neon_quad_write.
1232 (arm_neon_double_type, arm_neon_quad_type): New functions.
1233 (arm_register_type): Handle VFP and NEON registers. Override the
1234 types of double-precision registers for NEON. Disable FPA registers
1235 if they are not present.
1236 (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
1237 (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
1238 (arm_register_name): Handle VFP single and NEON quad registers.
1239 (arm_pseudo_read, arm_pseudo_write): New functions.
1240 (arm_gdbarch_init): Check for VFP and NEON in the target description.
1241 Assign numbers to double-precision registers. Register VFP and NEON
1242 pseudo registers. Remove a shadowed "i" variable.
1243 * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
1245 (struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
1246 have_vfp_registers, have_vfp_pseudos, neon_double_type,
1249 * features/Makefile: Make expedite settings only architecture
1251 (WHICH): Add new ARM descriptions.
1252 * features/arm-with-neon.xml, features/arm-with-vfpv2.c,
1253 features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
1254 features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
1255 features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
1256 * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
1257 regformats/arm-with-vfpv3.dat: Generate.
1259 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1261 * infrun.c (handle_inferior_event): Clear trap_expected after
1262 stepping past a single-step breakpoint.
1264 2009-07-28 Joseph Myers <joseph@codesourcery.com>
1266 * arm-tdep.c (enum arm_vfp_cprc_base_type,
1267 arm_vfp_cprc_unit_length, arm_vfp_cprc_reg_char,
1268 arm_vfp_cprc_sub_candidate, arm_vfp_call_candidate,
1269 arm_vfp_abi_for_function): New.
1270 (arm_push_dummy_call): Handle VFP ABI.
1271 (arm_extract_return_value, arm_store_return_value): Handle
1273 (arm_return_value): Handle VFP ABI.
1274 (arm_gdbarch_init): Default fp_model based on Tag_ABI_VFP_args for
1277 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1279 * arch-utils.c (displaced_step_at_entry_point): Do not call
1280 gdbarch_convert_from_func_ptr_addr.
1281 * cris-tdep.c: Remove outdated comment.
1282 * infcall.c (call_function_by_hand): Do not call
1283 gdbarch_convert_from_func_ptr_addr after entry_point_address.
1284 * objfiles.c (entry_point_address): Call both
1285 gdbarch_convert_from_func_ptr_addr and
1286 gdbarch_addr_bits_remove.
1288 2009-07-28 Aleksandar Ristovski <aristovski@qnx.com>
1290 * nto-tdep.c (nto_thread_state_str): New array.
1291 (nto_extra_thread_info): New function definition.
1292 * nto-tdep.h (gdbthread.h): New include.
1293 (private_thread_info): New struct.
1294 (nto_extra_thread_info): New declaration.
1295 * nto-procfs.c (procfs_thread_alive): Properly check if
1296 thread is still alive.
1297 (update_thread_private_data_name, update_thread_private_data): New
1298 function definition.
1299 (procfs_find_new_threads): Fetch thread private data.
1300 (init_procfs_ops): Register to_extra_thread_info.
1302 2009-07-25 Pedro Alves <pedro@codesourcery.com>
1304 * stack.c (backtrace_command_1): Remove dead check of NULL current
1307 2009-07-23 Keith Seitz <keiths@redhat.com>
1309 * source.c (forward_search_command): Don't fclose the stream,
1310 just run the cleanups.
1311 (reverse_search_command): Likewise.
1313 2009-07-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1315 * symtab.c (search_symbols): Add QUIT.
1317 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
1319 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call observer.
1321 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
1323 * objfiles.h (objfiles_changed): New prototype.
1324 * objfiles.c (objfiles_updated_p): Rename to objfiles_changed_p.
1325 (allocate_objfile, free_objfile): Must rebuild section map.
1326 (objfile_relocate): Likewise.
1327 (update_section_map, find_pc_section): Adjust.
1328 (set_objfiles_updated_on_exe_change): Remove.
1329 (set_objfiles_updated_on_solib_activity): Remove.
1330 (_initialize_objfiles): Remove.
1331 (objfiles_changed): New function.
1332 * symfile.c (reread_symbols): Call objfiles_changed.
1334 2009-07-22 Hui Zhu <teawater@gmail.com>
1336 * record.c (record_xfer_partial): Call error When nquery
1339 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1341 * objfiles.c (objfiles_updated_p): New variable.
1342 (qsort_cmp, bsearch_cmp, update_section_map): New function.
1343 (find_pc_section): Use bsearch.
1344 (set_objfiles_updated_on_exe_change): New function.
1345 (set_objfiles_updated_on_solib_activity): New function.
1346 (_initialize_objfiles): New function.
1348 2009-07-21 Michael Eager <eager@eagercon.com>
1350 * features/rs6000/powerpc-405.xml: New.
1351 * rs6000-tdep.c: Add include & initialize for
1352 powerpc-405.c, add 405 to variants.
1353 * features/rs6000/powerpc-405.c: Generate.
1355 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1357 * utils.c (internal_vproblem): Always print failure message.
1359 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
1360 Vladimir Prus <vladimir@codesourcery.com>
1362 * valops.c (value_fetch_lazy): Handle bitfields explicitly.
1363 (value_assign): Remove unnecessary FIXME. Honor the container
1364 type of bitfields if possible.
1365 * value.c (struct value): Add parent field.
1366 (value_parent): New function.
1367 (value_free): Free the parent also.
1368 (value_copy): Copy the parent also.
1369 (value_primitive_field): Do not read the contents of a lazy
1370 value to create a child bitfield value. Set bitpos and offset
1371 according to the container type if possible.
1372 (unpack_bits_as_long): Rename from unpack_field_as_long. Take
1373 field_type, bitpos, and bitsize instead of type and fieldno.
1374 (unpack_field_as_long): Use unpack_bits_as_long.
1375 * value.h (value_parent, unpack_bits_as_long): New prototypes.
1377 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
1379 * value.c (struct value): Add reference_count field.
1380 (allocate_value_lazy): Initialize reference_count.
1381 (value_incref): New function.
1382 (value_free): Check the reference count.
1383 * value.h (value_incref): New prototype.
1385 2009-07-20 Marc Khouzam <marc.khouzam@ericsson.com>
1387 * utils.c (defaulted_query): Update comment and remove dead code.
1389 2009-07-20 Doug Evans <dje@google.com>
1391 Add support for "comdat types" from DWARF4.
1392 * dwarf2read.c (dwarf2_per_objfile): New member types,
1394 (TYPES_SECTION): New macro.
1395 (dwarf2_per_cu_data): Change size of length field from 30 bits
1396 to 29 bits. New member from_debug_types.
1397 (signatured_type): New struct.
1398 (struct attribute): New union member signatured_type.
1399 (DW_SIGNATURED_TYPE): New macro.
1400 (dwarf2_attr_no_follow): New function.
1401 (read_type_unit_scope): New function.
1402 (follow_die_ref_or_sig, follow_die_sig): New functions.
1403 (dwarf2_locate_sectoins): Handle .debug_types.
1404 (dwarf2_build_psymtabs): Read .debug_types.
1405 (read_type_comp_unit_head): New function.
1406 (hash_type_signature, eq_type_signature): New functions.
1407 (create_debug_types_hash_table): New function.
1408 (lookup_signatured_type): New function.
1409 (process_psymtab_comp_unit): Handle type units too.
1410 (process_type_comp_unit, build_type_psymtabs): New functions.
1411 (dwarf2_build_psymtabs_hard): Call build_type_psymtabs.
1412 (load_partial_comp_unit): Assert not called for a type unit.
1413 (skip_one_die): Handle DW_FORM_sig8.
1414 (queue_comp_unit): Don't call load_full_comp_unit here, or
1415 update read_in_chain.
1416 (psymtab_to_symtab_1): Call read_signatured_type_at_offset for
1417 type units, or load_full_comp_unit for comp units after
1418 queue_comp_unit returns.
1419 (load_full_comp_unit): Assert not called for type units.
1420 (load_full_comp_unit): Update read_in_chain here.
1421 (process_die): Handle DW_TAG_type_unit.
1422 (read_structure_type): Look for signatured types.
1423 (read_enumeration_type): Ditto.
1424 (init_cu_die_reader): Handle .debug_types.
1425 (read_comp_unit): Assert hash not computed yet.
1426 (read_die_and_children): Expand debugging printf to handle .debug_types.
1427 (read_partial_die): Handle DW_TAG_type_unit:
1428 (find_patial_die): Handle .debug_types.
1429 (read_attribute_value): Handle DW_FORM_sig8.
1430 (die_type): Call follow_die_ref_or_sig instead of follow_die_ref.
1431 (die_containing_type): Ditto.
1432 (dwarf_tag_name): Handle DW_TAG_type_unit.
1433 (dwarf_attr_name): Handle DW_AT_signature.
1434 (dwarf_form_name): Handle DW_FORM_sec_offset, DW_FORM_exprloc,
1435 DW_FORM_flag_present, DW_FORM_sig8.
1436 (dump_die_shallow): Handlel DW_FORM_sig8.
1437 (maybe_queue_comp_unit): Change return type to int from void.
1438 All callers updated.
1439 (follow_die_ref): Handle .debug_types.
1440 (lookup_signatured_type_at_offset): New function.
1441 (read_signatured_type_at_offset): New function.
1442 (read_signatured_type): New function.
1444 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
1446 * arch-utils.c (gdbarch_info_fill): Only reference GDB_OSABI_DEFAULT
1447 if the macro is defined.
1449 2009-07-20 Pedro Alves <pedro@codesourcery.com>
1451 * features/gdb-target.dtd (target): Accept an optional 'osabi'
1453 (osabi): Define element.
1454 * features/mips-linux.xml (target): Add an osabi subelement set to
1456 * regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
1457 write the architecture into $xmltarget. Store it in $xmlarch.
1458 Handle the 'osabi' type. Handle outputting the osabi element of
1459 the target description.
1460 * regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
1461 * regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
1463 * target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
1464 * target-descriptions.c (struct target_desc) <osabi>: New field.
1465 (tdesc_osabi): New function.
1466 (set_tdesc_osabi): New function.
1467 * xml-tdesc.c: Include osabi.h.
1468 (tdesc_end_osabi): New.
1469 (target_children): Parse "osabi" elements.
1470 * arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
1471 target description if the user didn't override it or it is not
1472 extractable from the bfd. If that still fails, fallback to the
1473 configured in default.
1474 * osabi.h (osabi_from_tdesc_string): Declare.
1475 * osabi.c (osabi_from_tdesc_string): New.
1476 (gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
1479 * NEWS: Mention that target descriptions can now describe the
1482 2009-07-20 Mike Frysinger <vapier@gentoo.org>
1484 * configure.ac (AC_CHECK_FUNCS): Check for pipe.
1485 * config.in, configure: Regenerate.
1486 * tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
1488 2009-07-20 Pedro Alves <pedro@codesourcery.com>
1490 * gnu-nat.c: Include "inf-child.h".
1491 (gnu_mourn_inferior): Use the passed in target_ops
1492 instead of the gnu_ops global.
1493 (gnu_create_inferior): Inline `attach_to_child', use the passed in
1494 target_ops instead of the gnu_ops global.
1495 (gnu_can_run): Delete.
1496 (gnu_attach): Use the passed in target_ops instead of the gnu_ops
1498 (gnu_detach): Ditto.
1499 (gnu_prepare_to_store, gnu_open): Delete.
1500 (gnu_store_registers, gnu_fetch_registers): Delete declarations.
1502 (init_gnu_ops): Delete.
1504 (_initialize_gnu_nat): Don't call init_gnu_ops or add_target here.
1505 * gnu-nat.h (gnu_target): Declare.
1506 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Make
1508 (_initialize_i386gnu_nat): New.
1510 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
1512 * dwarf2loc.c (find_location_expression): Retrieve beginning and
1513 ending address offsets in location list entries as integers,
1516 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
1518 * infrun.c (wait_for_inferior): Invalidate registers and overlay
1519 cache every time before calling target_wait.
1520 (handle_inferior_event): Make static. Always reset waiton_ptid.
1521 Never call registers_changed.
1522 (prepare_to_wait): Do not invaliate registers or overlay cache
1523 (moved to wait_for_inferior). Do not reset waiton_ptid (moved
1524 to handle_inferior_event).
1525 (fetch_inferior_event): Remove check for always-true condition.
1527 2009-07-20 Thomas Schwinge <tschwinge@gnu.org>
1529 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Adjust to
1530 2009-02-23 target_ops changes.
1532 2009-07-18 Michael Snyder <msnyder@vmware.com>
1534 * infrun.c (handle_inferior_event): Remove an execution_direction
1535 check in the "check for subroutine calls" test, and add some
1536 additional handling for reverse-stepping through shared libraries.
1538 2009-07-18 Anthony Green <green@moxielogic.com>
1540 * moxie-tdep.c (moxie_analyze_prologue): Take gdbarch as last
1541 parameter instead of frame_info.
1542 (moxie_frame_cache): Call moxie_analyze_prologue with different
1545 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
1547 * solib.c (solib_bfd_open): Do not call ops->bfd_open.
1548 (solib_map_sections): Call ops->bfd_open instead of solib_bfd_open.
1549 * solib-frv.c (_initialize_frv_solib): Initialize bfd_open member.
1550 * solib-irix.c (_initialize_irix_solib): Likewise.
1551 * solib-null.c (_initialize_null_solib): Likewise.
1552 * solib-osf.c (_initialize_osf_solib): Likewise.
1553 * solib-pa64.c (_initialize_pa64_solib): Likewise.
1554 * solib-som.c (_initialize_som_solib): Likewise.
1555 * solib-sunos.c (_initialize_sunos_solib): Likewise.
1556 * solib-svr4.c (_initialize_svr4_solib): Likewise.
1557 * solib-target.c (_initialize_solib_target): Likewise.
1559 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
1561 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Respect mixed_mode flag.
1563 2009-07-16 Doug Evans <dje@google.com>
1565 * linux-thread.db.c (try_thread_db_load_1): Tweak comment.
1567 2007-07-16 Paul Pluzhnikov <ppluzhnikov@google.com>
1569 * linux-thread-db.c (thread_db_find_new_threads_silently):
1571 (try_thread_db_load_1): Call it.
1573 2009-07-15 Doug Evans <dje@google.com>
1575 Code reorg in preparation for adding comdat types support.
1576 * dwarf2read.c (struct die_reader_specs): New struct.
1577 (locate_pdi_sibling): New arg buffer. All callers updated.
1578 (load_partial_dies, read_partial_die): Ditto.
1579 (read_8_bytes): Change return type to ULONGEST.
1580 (read_comp_unit): Delete arg abfd. All callers updated.
1581 (read_die_and_children_1): Delete args abfd, cu. New arg reader.
1582 All callers updated.
1583 (read_die_and_children, read_die_and_siblings): Ditto.
1584 (read_full_die): Ditto. Move closer to callers.
1585 (skip_one_die): New arg buffer. All callers updated.
1586 (load_full_comp_unit): Change return type to void. All callers
1588 (partial_read_comp_unit_head): New args buffer, buffer_size.
1589 All callers updated.
1590 (process_psymtab_comp_unit): New function, split out from
1591 dwarf2_build_psymtabs_hard.
1592 (dwarf2_build_psymtabs_hard): Call it.
1593 (load_partial_comp_unit): Renamed from load_comp_unit.
1594 All callers updated.
1595 (skip_children): New arg buffer. All callers updated.
1596 (init_cu_die_reader): New function.
1597 (is_ref_attr): New function.
1598 (dwarf2_get_ref_die_offset): Call it.
1599 (alloc_one_comp_unit): New function.
1601 2009-07-14 Stan Shebs <stan@codesourcery.com>
1603 * MAINTAINERS (Global Maintainers): Add Doug Evans.
1605 2009-07-14 Stan Shebs <stan@codesourcery.com>
1607 Conditional tracepoints.
1608 * ax-gdb.h (gen_eval_for_expr): Declare.
1609 * ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
1610 and other comparisons.
1611 (gen_eval_for_expr): New function.
1612 (agent_eval_command): New maintenance command.
1613 (_initialize_ax_gdb): Define the command.
1614 * remote.c (struct remote_state): New field cond_tracepoints.
1615 (PACKET_ConditionalTracepoints): New packet config type.
1616 (remote_cond_tracepoint_feature): New function.
1617 (remote_protocol_features): Add ConditionalTracepoints.
1618 (remote_supports_cond_tracepoints): New function.
1619 (_initialize_remote): Add ConditionalTracepoints.
1620 * tracepoint.c (download_tracepoint): Add conditional.
1621 * NEWS: Mention conditional tracepoints.
1623 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
1625 * objfiles.c (objfile_relocate): Do not relocate the same
1626 BLOCKVECTOR_MAP address map multiple times.
1628 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
1630 * remote.c (process_stop_reply): Access expedited target registers
1633 2009-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1635 Fix memory access from signed 32bit inferior registers on 64bit GDB.
1636 * linux-nat.c (linux_xfer_partial <TARGET_OBJECT_MEMORY>): New variable
1637 addr_bit. Mask OFFSET by the ADDR_BIT width.
1639 2009-07-13 Anthony Green <green@moxielogic.com>
1641 * moxie-tdep.c (moxie_gdbarch_init): Call
1642 set_gdbarch_process_record.
1643 (moxie_process_record): New.
1644 (moxie_process_readu): New.
1646 2009-07-12 Michael Snyder <msnyder@vmware.com>
1648 * i386-tdep.c: Add a frame unwinder for function epilogues.
1649 (i386_in_function_epilogue_p): New function.
1650 (i386_epilogue_frame_sniffer): New function.
1651 (i386_epilogue_frame_cache): New function.
1652 (i386_epilogue_frame_this_id): New function.
1653 (i386_epilogue_frame_unwind): New struct frame_unwind.
1654 (i386_gdbarch_init): Hook the new unwinder.
1656 2009-07-11 Hui Zhu <teawater@gmail.com>
1658 * cli/cli-cmds.c (disassemble_command): Add a new modifier /r
1659 to "disassemble" command to print the raw instructions in hex as
1660 well as in symbolic form.
1661 (init_cli_cmds): Ditto.
1662 (print_disassembly): Change "mixed" to "flags" to translate
1663 the behavior of disassemble.
1664 (disassemble_current_function): Ditto.
1665 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
1666 * stack.c (gdb_disassembly_stub): Ditto.
1667 * disasm.c (do_mixed_source_and_assembly): Ditto.
1668 (do_mixed_source_and_assembly): Ditto.
1669 (do_assembly_only): Ditto.
1670 (gdb_disassembly): Ditto.
1671 (dump_insns): print the raw instructions in hex as well as in
1672 symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
1673 * disasm.h (DISASSEMBLY_SOURCE): Include source code with the
1674 assembly if it and flags is true.
1675 (DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
1676 the assembly if it and flags is true.
1677 (gdb_disassembly): Update extern.
1678 * NEWS: Document disassemble/r support.
1680 2009-07-10 Tom Tromey <tromey@redhat.com>
1682 * dwarf2-frame.c: Include dwarf2.h, not elf/dwarf2.h.
1683 * dwarf2expr.c: Likewise.
1684 * dwarf2loc.c: Likewise.
1685 * dwarf2read.c: Likewise.
1686 * sh-tdep.c: Likewise.
1687 * xtensa-tdep.c: Likewise.
1689 2009-07-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1692 * mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv. Move
1693 variables var, rootlist and cr to their local sub-block. Move the
1694 make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
1695 and do_cleanups calls to the common base block. Remove the zero NV
1698 2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
1700 * python/python-internal.h (apply_varobj_pretty_printer): Update
1702 (python_string_to_target_python_string): Add definition.
1703 * python/python-utils.c (unicode_to_encoded_python_string)
1704 (unicode_to_target_python_string)
1705 (python_string_to_target_python_string): New Functions.
1706 * python/python-prettyprint.c (pretty_print_one_value): Likewise.
1707 (print_string_repr): Refactor to logic to account for PyObject
1709 (apply_varobj_pretty_printer): Likewise.
1710 * python/python-value.c (valpy_string): Parse length keyword. Use
1711 length keyword in LA_GET_STRING.
1712 * varobj.c (value_get_print_value): Refactor logic to account for
1713 PyObject returned strings.
1714 * c-lang.c (c_get_string): If the length parameter is specified,
1715 use that. Return value in characters. Update comments.
1716 * language.h: Update c_get_string prototype comments.
1718 2009-07-09 Doug Evans <dje@google.com>
1720 * i386-tdep.c (i386_displaced_step_fixup): Fix order of arguments
1721 to read_memory_unsigned_integer.
1723 2009-07-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1725 Report error on inaccessible memory.
1726 * cli/cli-dump.c: Include gdbcore.h.
1727 (dump_memory_to_file): Call read_memory instead of target_read_memory.
1729 2009-07-09 Hui Zhu <teawater@gmail.com>
1731 * solib.c (solib_bfd_open): Output a warning if solib's
1732 architecture is not compatible with inferior's architecture.
1734 2009-07-09 Ulrich Weigand <uweigand@de.ibm.com>
1735 Jan Kratochvil <jan.kratochvil@redhat.com>
1737 * target.h (struct target_ops <to_thread_architecture>): Describe it.
1738 (target_thread_architecture): Refer to to_thread_architecture.
1740 2009-07-08 Pierre Muller <muller@ics.u-strasbg.fr>
1742 * cli/cli-cmds.c (init_cli_cmds): Add "inf" alias for "info" command.
1744 2009-07-07 Ulrich Weigand <uweigand@de.ibm.com>
1746 * tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.
1748 2009-07-07 Pierre Muller <muller@ics.u-strasbg.fr>
1750 * breakpoint.c (set_raw_breakpoint): Remove static modifier.
1752 2009-07-07 Tom Tromey <tromey@redhat.com>
1754 * c-lang.c (convert_octal): Only allow 3 octal digits.
1755 (print_wchar): Prefer 3-digit octal form. Fall back to hex if
1757 * c-exp.y (c_parse_escape): Only allow 3 octal digits.
1759 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
1761 * python/python-value.c (valpy_getitem): Remove incorrect assert.
1763 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
1765 * python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.
1767 2009-07-07 Sami Wagiaalla <swagiaal@redhat.com>
1769 * cp-support.h (struct using_direct): Rename members inner and
1770 outer to import_src, and import_dest respectively.
1771 * cp-namespace.c (cp_add_using_directive): Update.
1772 (cp_add_using): Update.
1773 (cp_copy_usings): Update.
1774 (cp_lookup_symbol_namespace): Update.
1775 (cp_scan_for_anonymous_namespaces): Update.
1776 * cp-support.c (make_symbol_overload_list_using): Update.
1777 * cp-support.h (cp_add_using_directive, cp_add_using): Rename
1778 arguments from inner and outer to src and dest respectively.
1779 * cp-namespace.c (cp_add_using_directive): Ditto.
1780 (cp_add_using): Ditto.
1782 2009-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1784 * mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
1785 * varobj.c (varobj_invalidate): Replace a while loop by for loop.
1787 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
1789 Fix hang in floating varobjs.
1791 * varobj.c (varobj_invalidate): Advance to next
1792 element when processing floating varobj.
1794 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
1796 * varobj.c: Remove unnecessary include.
1798 2009-07-07 Tristan Gingold <gingold@adacore.com>
1800 * config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
1801 Remove excServer.c target. Remove _all target.
1802 * darwin.defs: Removed.
1804 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
1806 * configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
1808 2009-07-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1810 * source.c (find_and_open_source): Remove the `objfile' parameter.
1811 Update the function comment.
1812 (open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
1813 find_and_open_source callers.
1815 2009-07-05 Pedro Alves <pedro@codesourcery.com>
1817 * coff-pe-read.c (read_pe_exported_syms): Recognize
1818 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
1821 2009-07-05 Pedro Alves <pedro@codesourcery.com>
1823 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
1824 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
1827 2009-06-29 Tristan Gingold <gingold@adacore.com>
1829 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
1830 (amd64_darwin_thread_state_num_regs)
1831 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
1833 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
1834 (darwin_dwarf_signal_frame_p): Make public.
1835 * amd64-darwin-tdep.c: New file with most chunks from
1837 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
1838 (amd64_darwin_thread_state_reg_offset)
1839 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
1840 * amd64-darwin-tdep.h: New file.
1841 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
1842 if BFD64 is defined.
1843 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
1845 (i386_darwin_store_inferior_registers): Ditto.
1846 (darwin_set_sstep): Ditto.
1847 (darwin_complete_target): Ditto.
1848 (amd64_darwin_sstep_at_sigreturn): Ditto.
1849 * configure.tgt: Create a separate entry for x86_64-*-darwin.
1850 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
1851 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
1852 i386-darwin-tdep.c i386-darwin-nat.c
1853 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
1855 2009-07-02 Pedro Alves <pedro@codesourcery.com>
1857 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
1858 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
1859 (linux_fork_detach): Ditto.
1860 (delete_fork_command): Rename to ...
1861 (delete_checkpoint_command): ... this.
1862 (detach_fork_command): Rename to ...
1863 (detach_checkpoint_command): ... this.
1864 (info_forks_command): Rename to ...
1865 (info_checkpoints_command): ... this.
1866 (_initialize_linux_fork): Remove stale comments. Adjust.
1868 2009-07-02 Pedro Alves <pedro@codesourcery.com>
1870 * linux-nat.c (linux_child_follow_fork): If we're staying attached
1871 to the child process, enable event reporting on it. Don't handle
1872 checkpoints here. Instead, add the child fork to the lwp thread
1873 and inferior lists without clobbering the previous inferior. Let
1874 the thread_db layer learn about a new child process, even if
1875 following the parent.
1876 (linux_nat_switch_fork): Delete lwps of the current inferior only,
1877 instead of clearing the whole list. Use thread_change_ptid to
1878 give the core the illusion the new checkpoint is still the same
1879 inferior. Clear the register cache.
1880 (linux_handle_extended_wait): Handle checkpoints here.
1881 (linux_multi_process): Turn on.
1882 * linux-fork.c (struct fork_info) <pc>: Remove field.
1883 (init_fork_list): Do not delete the checkpoint from the inferior
1884 list (it is not there).
1885 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
1886 the new checkpoint's ptid to linux_nat_switch_fork.
1887 (fork_save_infrun_state): Make static. Don't stop the pc field of
1888 fork_info, it's gone.
1889 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
1890 inferior list, it's not there.
1891 (linux_fork_detach): Ditto.
1892 (delete_fork_command): Replace mention of fork/checkpoint by
1894 (detach_fork_command): Likewise. Don't delete the checkpoint from
1896 (info_forks_command): Adjust.
1897 (restore_detach_fork): Delete.
1898 (checkpointing_pid): New.
1899 (linux_fork_checkpointing_p): New.
1900 (save_detach_fork): Delete.
1901 (checkpoint_command): Delete temp_detach_fork. Don't remove
1902 breakpoints, that's a nop. Store the pid of the process we're
1903 checkpointing, and use make_cleanup_restore_integer to restore it.
1904 Don't reinsert breakpoints here.
1905 (process_command, fork_command): Delete.
1906 (restart_command): Update comments to only mention checkpoints,
1908 (_initialize_linux_fork): Delete "fork", "process", "info forks"
1910 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
1912 (linux_fork_checkpointing_p): Declare.
1913 * cli/cli-cmds.c (killlist): New.
1914 * cli/cli-cmds.h (killlist): Declare.
1915 * gdbcmd.h (killlist): Declare.
1916 * inferior.c: Include "gdbthread.h".
1917 (detach_inferior_command, kill_inferior_command)
1918 (inferior_command): New.
1919 (info_inferiors_command): Allow specifying a specific inferior id.
1920 (_initialize_inferiors): Register "inferior", "kill inferior" and
1921 "detach inferior" commands.
1922 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
1923 * gdbthread.h (any_thread_of_process): Declare.
1924 * thread.c (any_thread_of_process): New.
1926 * NEWS: Mention multi-inferior debugging. Mention 'info
1927 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
1929 (Removed commands): New section, mentioning that 'info forks',
1930 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
1932 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1934 * gdbarch.sh (current_gdbarch): Remove global variable.
1935 (find_arch_by_info): Remove, inline into ...
1936 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
1937 (deprecated_current_gdbarch_select_hack): Rename to ...
1938 (deprecated_target_gdbarch_select_hack): ... this. Do not set
1939 or access current_gdbarch.
1940 * gdbarch.c, gdbarch.h: Regenerate.
1942 * arch-utils.c (gdbarch_update_p): Update call.
1943 (set_gdbarch_from_file): Likewise.
1945 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1947 * defs.h (extract_signed_integer, extract_unsigned_integer,
1948 extract_long_unsigned_integer, store_signed_integer,
1949 store_unsigned_integer): Add BYTE_ORDER parameter.
1950 * findvar.c (extract_signed_integer, extract_unsigned_integer,
1951 extract_long_unsigned_integer, store_signed_integer,
1952 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
1953 instead of current_gdbarch.
1955 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
1956 read_memory_unsigned_integer, write_memory_signed_integer,
1957 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
1958 * corefile.c (struct captured_read_memory_integer_arguments): Add
1960 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
1961 struct captured_read_memory_integer_arguments.
1962 (do_captured_read_memory_integer): Pass it to read_memory_integer.
1963 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
1964 extract_signed_integer.
1965 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
1966 extract_unsigned_integer.
1967 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
1968 to store_signed_integer.
1969 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
1970 to store_unsigned_integer.
1972 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
1973 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
1974 Pass it to extract_unsigned_integer.
1977 Update calls to extract_signed_integer, extract_unsigned_integer,
1978 extract_long_unsigned_integer, store_signed_integer,
1979 store_unsigned_integer, read_memory_integer,
1980 read_memory_unsigned_integer, safe_read_memory_integer,
1981 write_memory_signed_integer, write_memory_unsigned_integer, and
1982 get_target_memory_unsigned to pass byte order:
1983 * ada-lang.c (ada_value_binop): Update.
1984 * ada-valprint.c (char_at): Update.
1985 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
1986 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
1987 alpha_extract_return_value, alpha_read_insn,
1988 alpha_get_longjmp_target): Update.
1989 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
1990 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
1991 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
1992 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
1993 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
1994 amd64_displaced_step_fixup): Update.
1995 * arm-linux-tdep.c (arm_linux_sigreturn_init,
1996 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
1997 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
1998 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
1999 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
2000 arm_return_value): Update.
2001 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
2002 * auxv.c (default_auxv_parse): Update.
2003 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
2004 avr_scan_prologue, avr_extract_return_value,
2005 avr_frame_prev_register, avr_push_dummy_call): Update.
2006 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
2007 bsd_uthread_wait, bsd_uthread_thread_alive,
2008 bsd_uthread_extra_thread_info): Update.
2009 * c-lang.c (c_printstr, print_wchar): Update.
2010 * cp-valprint.c (cp_print_class_member): Update.
2011 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
2012 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
2013 cris_extract_return_value, find_step_target, dip_prefix,
2014 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
2015 move_mem_to_reg_movem_op, get_data_from_address): Update.
2016 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
2017 * dwarf2-frame.c (execute_cfa_program): Update.
2018 * dwarf2loc.c (find_location_expression): Update.
2019 * dwarf2read.c (dwarf2_const_value): Update.
2020 * expprint.c (print_subexp_standard): Update.
2021 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
2022 unsigned_address_to_pointer, address_to_signed_pointer,
2023 read_var_value): Update.
2024 * frame.c (frame_unwind_register_signed,
2025 frame_unwind_register_unsigned, get_frame_memory_signed,
2026 get_frame_memory_unsigned): Update.
2027 * frame-unwind.c (frame_unwind_got_constant): Update.
2028 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
2029 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
2031 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
2032 frv_extract_return_value, find_func_descr,
2033 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
2034 * f-valprint.c (f_val_print): Update.
2035 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
2037 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
2038 h8300_push_dummy_call, h8300_extract_return_value,
2039 h8300h_extract_return_value, h8300_store_return_value,
2040 h8300h_store_return_value): Update.
2041 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
2042 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
2044 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
2045 hppa64_hpux_in_solib_call_trampoline,
2046 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
2047 hppa_hpux_sigtramp_frame_unwind_cache,
2048 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
2049 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
2050 hppa32_hpux_search_dummy_call_sequence,
2051 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
2052 hppa_hpux_unwind_adjust_stub): Update.
2053 * hppa-linux-tdep.c (insns_match_pattern,
2054 hppa_linux_find_global_pointer): Update.
2055 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
2056 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
2057 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
2058 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
2059 hppa_match_insns): Update.
2060 * hpux-thread.c (hpux_thread_fetch_registers): Update.
2061 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
2062 * i386-cygwin-tdep.c (core_process_module_section): Update.
2063 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
2064 amd64_darwin_sstep_at_sigreturn): Update.
2065 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
2066 amd64_darwin_sigcontext_addr): Likewise.
2067 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
2068 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
2069 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
2070 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
2071 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
2072 i386obsd_trapframe_cache): Update.
2073 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
2074 i386_analyze_frame_setup, i386_analyze_prologue,
2075 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
2076 i386_get_longjmp_target, i386_push_dummy_call,
2077 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
2078 i386_fetch_pointer_argument): Update.
2079 * i387-tdep.c (i387_supply_fsave): Update.
2080 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
2081 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
2082 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
2083 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
2084 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
2085 ia64_libunwind_frame_prev_register,
2086 ia64_libunwind_sigtramp_frame_this_id,
2087 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
2088 find_extant_func_descr, find_func_descr,
2089 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
2090 ia64_unwind_pc): Update.
2091 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
2092 iq2000_scan_prologue, iq2000_extract_return_value,
2093 iq2000_push_dummy_call): Update.
2094 * irix5nat.c (fill_gregset): Update.
2095 * jv-lang.c (evaluate_subexp_java): Update.
2096 * jv-valprint.c (java_value_print): Update.
2097 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
2098 lm32_extract_return_value, lm32_store_return_value): Update.
2099 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
2100 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
2101 m32c_m16c_pointer_to_address): Update.
2102 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
2103 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
2105 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
2106 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
2107 m68hc11_push_dummy_call): Update.
2108 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
2109 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
2111 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
2112 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
2113 m68k_get_longjmp_target): Update.
2114 * m88k-tdep.c (m88k_fetch_instruction): Update.
2115 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
2116 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
2117 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
2118 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
2119 mips64_linux_get_longjmp_target, mips64_fill_gregset,
2120 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
2121 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
2122 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
2123 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
2124 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
2125 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
2126 mips_integer_to_address): Update.
2127 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
2129 * monitor.c (monitor_supply_register, monitor_write_memory,
2130 monitor_read_memory_single): Update.
2131 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
2132 moxie_analyze_prologue): Update.
2133 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
2134 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
2135 mt_push_dummy_call): Update.
2136 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
2137 read_objc_methlist_method, read_objc_object, read_objc_super,
2138 read_objc_class, find_implementation_from_class): Update.
2139 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
2140 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
2142 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
2143 ppcobsd_sigtramp_frame_cache): Update.
2144 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
2145 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
2146 ppc64_sysv_abi_return_value): Update.
2147 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
2148 * procfs.c (procfs_auxv_parse): Update.
2149 * p-valprint.c (pascal_val_print): Update.
2150 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
2151 regcache_raw_write_signed, regcache_raw_write_unsigned,
2152 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
2153 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
2154 * remote-m32r-sdi.c (m32r_fetch_register): Update.
2155 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
2157 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
2158 rs6000_convert_from_func_ptr_addr, branch_dest,
2159 rs6000_software_single_step): Update.
2160 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
2161 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
2162 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
2163 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
2164 rs6000_frame_cache): Update.
2165 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
2166 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
2167 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
2168 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
2169 * scm-exp.c (scm_lreadr): Update.
2170 * scm-lang.c (scm_get_field, scm_unpack): Update.
2171 * scm-valprint.c (scm_val_print): Update.
2172 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
2173 score_fetch_inst): Update.
2174 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
2175 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
2176 sh64_pseudo_register_read, sh64_pseudo_register_write,
2177 sh64_frame_prev_register): Update:
2178 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
2179 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
2180 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
2181 * solib-darwin.c (darwin_load_image_infos): Update.
2182 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
2183 find_canonical_descriptor_in_load_object): Update.
2184 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
2185 irix_open_symbol_file_object): Update.
2186 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
2187 som_current_sos, som_open_symbol_file_object): Update.
2188 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
2190 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
2191 solib_svr4_r_ldsomap): Update.
2192 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
2193 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
2194 sparc64obsd_collect_uthread): Update.
2195 * sparc64-tdep.c (sparc64_pseudo_register_read,
2196 sparc64_pseudo_register_write, sparc64_supply_gregset,
2197 sparc64_collect_gregset): Update.
2198 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
2199 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
2200 sparc32obsd_collect_uthread): Update.
2201 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
2202 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
2203 sparc_collect_rwindow): Update.
2204 * spu-linux-nat.c (parse_spufs_run): Update.
2205 * spu-tdep.c (spu_pseudo_register_read_spu,
2206 spu_pseudo_register_write_spu, spu_pointer_to_address,
2207 spu_analyze_prologue, spu_in_function_epilogue_p,
2208 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
2209 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
2210 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
2211 info_spu_dma_command, info_spu_proxydma_command): Update.
2212 * stack.c (print_frame_nameless_args, frame_info): Update.
2213 * symfile.c (read_target_long_array, simple_read_overlay_table,
2214 simple_read_overlay_region_table): Update.
2215 * target.c (debug_print_register): Update.
2216 * tramp-frame.c (tramp_frame_start): Update.
2217 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
2218 v850_extract_return_value, v850_store_return_value,
2219 * valarith.c (value_binop, value_bit_index): Update.
2220 * valops.c (value_cast): Update.
2221 * valprint.c (val_print_type_code_int, val_print_string,
2222 read_string): Update.
2223 * value.c (unpack_long, unpack_double, unpack_field_as_long,
2224 modify_field, pack_long): Update.
2225 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
2226 vax_skip_prologue): Update.
2227 * xstormy16-tdep.c (xstormy16_push_dummy_call,
2228 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
2229 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
2230 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
2231 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
2232 xtensa_pseudo_register_write, xtensa_frame_cache,
2233 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
2236 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
2237 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
2238 BYTE_ORDER parameter.
2239 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
2241 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
2242 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
2243 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
2244 instead of current_gdbarch.
2245 (decimal_to_string, decimal_from_integral, decimal_from_floating,
2246 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
2247 Pass it to match_endianness.
2248 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
2249 parameters. Pass them to match_endianness.
2250 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
2251 Pass them to match_endianness.
2252 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
2253 Pass them to match_endianness.
2254 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
2255 BYTE_ORDER_Y output parameters.
2256 (value_binop): Update call to value_args_as_decimal.
2258 Update calls to decimal_to_string, decimal_from_string,
2259 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
2260 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
2261 to pass/receive byte order:
2262 * c-exp.y (parse_number): Update.
2263 * printcmd.c (printf_command): Update.
2264 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
2265 value_equal, value_less): Update.
2266 * valops.c (value_cast, value_one): Update.
2267 * valprint.c (print_decimal_floating): Update.
2268 * value.c (unpack_long, unpack_double): Update.
2269 * python/python-value.c (valpy_nonzero): Update.
2272 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
2273 (printstr): Update calls to char_at.
2274 (ada_val_print_array): Likewise.
2275 * valprint.c (read_string): Add BYTE_ORDER parameter.
2276 (val_print_string): Update call to read_string.
2277 * c-lang.c (c_get_string): Likewise.
2278 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
2279 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
2280 Use it instead of current_gdbarch.
2281 * printcmd.c (printf_command): Update calls to target_wide_charset.
2282 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
2283 Pass to target_wide_charset. Use it instead of current_gdbarch.
2284 (classify_type): Add BYTE_ORDER parameter. Pass to
2285 charset_for_string_type. Allow NULL encoding pointer.
2286 (print_wchar): Add BYTE_ORDER parameter.
2287 (c_emit_char): Update calls to classify_type and print_wchar.
2288 (c_printchar, c_printstr): Likewise.
2291 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
2292 * gdbarch.c, gdbarch.h: Regenerate.
2293 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
2295 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
2296 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
2297 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
2298 (rs6000_skip_trampoline_code): Update call.
2300 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
2301 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
2302 (alpha_read_insn): Add GDBARCH parameter.
2303 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
2304 (alpha_register_to_value): Pass architecture to alpha_sts.
2305 (alpha_extract_return_value): Likewise.
2306 (alpha_value_to_register): Pass architecture to alpha_lds.
2307 (alpha_store_return_value): Likewise.
2308 (alpha_read_insn): Add GDBARCH parameter.
2309 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
2310 (alpha_heuristic_proc_start): Likewise.
2311 (alpha_heuristic_frame_unwind_cache): Likewise.
2312 (alpha_next_pc): Likewise.
2313 (alpha_sigtramp_frame_this_id): Pass architecture to
2314 tdep->dynamic_sigtramp_offset callback.
2315 (alpha_sigtramp_frame_sniffer): Pass architecture to
2316 tdep->pc_in_sigtramp callback.
2317 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
2318 (alphafbsd_sigtramp_offset): Likewise.
2319 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
2320 parameter. Pass to alpha_read_insn.
2321 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
2322 alpha_linux_sigtramp_offset_1.
2323 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
2324 alpha_linux_sigtramp_offset.
2325 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
2326 and alpha_linux_sigtramp_offset.
2327 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
2328 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
2329 alphanbsd_sigtramp_offset.
2330 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
2331 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
2333 (alphaobsd_sigcontext_addr): Pass architecture to
2334 alphaobsd_sigtramp_offset.
2335 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
2338 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
2339 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
2340 (amd64_frame_cache): Likewise.
2342 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
2343 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
2344 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
2345 * arm-wince-tdep.c: Include "frame.h".
2347 * avr-tdep.c (EXTRACT_INSN): Remove.
2348 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
2349 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
2350 (avr_frame_unwind_cache): Likewise.
2352 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
2353 (find_step_target): Initialize it.
2354 (get_data_from_address): Add BYTE_ORDER parameter.
2355 (bdap_prefix): Pass byte order to get_data_from_address.
2356 (handle_prefix_assign_mode_for_aritm_op): Likewise.
2357 (three_operand_add_sub_cmp_and_or_op): Likewise.
2358 (handle_inc_and_index_mode_for_aritm_op): Likewise.
2360 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
2361 (frv_linux_sigcontext_reg_addr): Pass architecture to
2362 frv_linux_pc_in_sigtramp.
2363 (frv_linux_sigtramp_frame_sniffer): Likewise.
2365 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
2366 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
2367 h8300_is_argument_spill.
2368 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
2369 to h8300_analyze_prologue.
2371 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
2372 in_solib_call_trampoline callback.
2373 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
2374 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
2376 (hppa64_push_dummy_call): Pass architecture to
2377 hppa64_convert_code_addr_to_fptr.
2378 (hppa_match_insns): Add GDBARCH parameter.
2379 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
2381 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
2382 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
2383 hppa_match_insns_relaxed.
2384 (hppa_stub_unwind_sniffer): Pass architecture to
2385 tdep->in_solib_call_trampoline callback.
2386 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
2387 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
2388 hppa_hpux_search_pattern.
2389 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
2390 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
2391 Pass to insns_match_pattern.
2392 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
2393 hppa_linux_sigtramp_find_sigcontext.
2394 (hppa_linux_sigtramp_frame_sniffer): Likewise.
2395 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
2396 (hppa64_hpux_in_solib_call_trampoline): Likewise.
2398 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
2399 (i386_analyze_frame_setup): Add GDBARCH parameter.
2400 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
2401 i386_follow_jump and i386_analyze_frame_setup.
2402 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
2403 and i386_follow_jump.
2404 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
2405 (i386_pe_skip_trampoline_code): Add FRAME parameter.
2406 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
2407 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
2408 frame to i386_pe_skip_trampoline_code.
2410 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
2411 to sigcontext_register_address callback.
2412 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
2413 (ia64_find_unwind_table): Pass architecture to
2414 ia64_find_global_pointer.
2415 (find_extant_func_descr): Add GDBARCH parameter.
2416 (find_func_descr): Pass architecture to find_extant_func_descr
2417 and ia64_find_global_pointer.
2418 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
2419 tdep->sigcontext_register_address callback.
2420 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
2423 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
2424 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
2426 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
2427 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
2428 lm32_analyze_prologue.
2430 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
2431 (m32r_skip_prologue): Pass architecture to decode_prologue.
2433 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
2434 (m68hc11_scan_prologue): Pass architecture to
2435 m68hc11_analyze_instruction.
2437 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
2438 (m68k_analyze_prologue): Pass architecture to
2439 m68k_analyze_frame_setup.
2441 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
2442 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
2443 to m88k_fetch_instruction.
2444 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
2445 (m88k_frame_cache): Likewise.
2447 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
2448 (mep_analyze_prologue): Pass architecture to mep_get_insn.
2450 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
2451 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
2452 (deal_with_atomic_sequence): Likewise.
2453 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
2454 (mips16_scan_prologue): Likewise.
2455 (mips32_scan_prologue): Likewise.
2456 (mips16_in_function_epilogue_p): Likewise.
2457 (mips32_in_function_epilogue_p): Likewise.
2458 (mips_about_to_return): Likewise.
2459 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
2460 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
2461 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
2462 and mips32_scan_prologue.
2463 (mips_in_function_epilogue_p): Pass architecture to
2464 mips16_in_function_epilogue_p and
2465 mips32_in_function_epilogue_p.
2466 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
2467 and mips_about_to_return.
2468 (mips_skip_mips16_trampoline_code): Pass architecture to
2469 mips_fetch_instruction.
2470 (fetch_mips_16): Add GDBARCH parameter.
2471 (mips16_next_pc): Pass architecture to fetch_mips_16.
2472 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
2475 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
2476 read_objc_methlist_method, read_objc_object, read_objc_super,
2477 read_objc_class): Add GDBARCH parameter.
2478 (find_implementation_from_class): Add GDBARCH parameter, pass
2479 to read_objc_class, read_objc_methlist_nmethods, and
2480 read_objc_methlist_method.
2481 (find_implementation): Add GDBARCH parameter, pass to
2482 read_objc_object and find_implementation_from_class.
2483 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
2484 to find_implementation.
2485 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
2486 architecture to read_objc_super and find_implementation_from_class.
2488 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
2489 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
2490 ppc64_standard_linkage3_target): Pass architecture to
2491 ppc64_desc_entry_point.
2492 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
2493 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
2494 (rs6000_fetch_instruction): Add GDBARCH parameter.
2495 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
2496 rs6000_fetch_instruction.
2497 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
2499 * remote-mips.c (mips_store_word): Return old_contents as host
2500 integer value instead of target bytes.
2502 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
2503 (s390_analyze_prologue): Initialize it.
2504 (extend_simple_arg): Add GDBARCH parameter.
2505 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
2507 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
2508 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
2509 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
2510 * scm-valprint.c (scm_scmval_print): Likewise.
2511 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
2514 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
2515 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
2516 look_for_args_moves.
2517 (sh64_skip_prologue): Pass architecture to
2518 sh64_skip_prologue_hard_way.
2519 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
2520 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
2521 (sh_frame_cache): Likewise.
2523 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
2524 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
2525 Pass architecture to extract_mips_address.
2527 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
2528 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
2529 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
2530 to sparc_fetch_wcookie.
2531 (sparc32_frame_prev_register): Likewise.
2532 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
2533 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
2534 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
2536 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
2537 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
2538 (spu_virtual_frame_pointer): Likewise.
2539 (spu_frame_unwind_cache): Likewise.
2540 (info_spu_mailbox_list): Add BYTE_ORER parameter.
2541 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
2542 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
2543 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
2544 to info_spu_dma_cmdlist.
2546 * symfile.c (read_target_long_array): Add GDBARCH parameter.
2547 (simple_read_overlay_table, simple_read_overlay_region_table,
2548 simple_overlay_update_1): Pass architecture to read_target_long_array.
2550 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
2551 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
2553 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
2555 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
2556 to xstormy16_analyze_prologue.
2557 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
2558 (xstormy16_find_jmp_table_entry): Likewise.
2559 (xstormy16_skip_trampoline_code): Pass architecture to
2560 xstormy16_resolve_jmp_table_entry.
2561 (xstormy16_pointer_to_address): Likewise.
2562 (xstormy16_address_to_pointer): Pass architecture to
2563 xstormy16_find_jmp_table_entry.
2565 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
2566 (call0_analyze_prologue): Add GDBARCH parameter, pass to
2568 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
2569 (xtensa_skip_prologue): Likewise.
2571 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2573 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
2574 (paddress): Add GDBARCH parameter.
2575 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
2576 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
2577 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
2578 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
2579 use it instead of current_gdbarch.
2581 Update calls to ui_out_field_core_addr to pass architecture:
2582 * ada-lang.c (print_one_exception): Update.
2583 * breakpoint.c (print_one_breakpoint_location,
2584 print_one_exception_catchpoint): Update.
2585 * disasm.c (dump_insns): Update.
2586 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
2587 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
2588 * mi/mi-symbol-cmds.c: Include "objfiles.h".
2589 (mi_cmd_symbol_list_lines): Update.
2590 * stack.c (print_frame_info, print_frame): Update.
2592 Update callers of paddress to pass architecture:
2593 * ada-tasks.c (info_task): Update.
2594 * ada-valprint.c (ada_val_print_1): Update.
2595 * annotate.c (annotate_source, annotate_frame_begin): Update.
2596 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
2598 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
2600 * corefile.c (memory_error): Update.
2601 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
2602 * disasm.c (dis_asm_print_address): Update.
2603 * exec.c (print_section_info): Update.
2604 * f-valprint.c (f_val_print): Update.
2605 * infcmd.c: Include "arch-utils.h".
2606 (jump_command, program_info): Update.
2607 * linux-fork.c: Include "arch-utils.h".
2608 (info_forks_command): Update.
2609 * m2-valprint.c (print_function_pointer_address,
2610 print_unpacked_pointer, print_variable_at_address,
2611 m2_val_print): Update.
2612 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
2614 * printcmd.c (print_address, print_address_demangle, address_info):
2616 * p-valprint.c (pascal_val_print): Update.
2617 * source.c: Include "arch-utils.h".
2618 (line_info): Update.
2619 * stack.c (frame_info, print_block_frame_labels): Update.
2620 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
2621 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
2622 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
2623 maintenance_check_symtabs): Update.
2624 * symtab.c (find_pc_sect_symtab): Update.
2625 * target.c (deprecated_debug_xfer_memory): Update.
2626 * tracepoint.c (scope_info): Update.
2627 * tui/tui-stack.c (tui_make_status_line): Update.
2628 * valprint.c (val_print_string): Update.
2630 Update callers of paddr_nz to use paddress instead (keeping
2631 user-visible output identical):
2632 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
2633 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
2634 amd64_displaced_step_fixup): Update.
2635 * arch-utils.c (simple_displaced_step_copy_insn): Update.
2636 * auxv.c (fprint_target_auxv): Update.
2637 * breakpoint.c (insert_single_step_breakpoint): Update.
2638 * buildsym.c (finish_block): Update.
2639 * cli/cli-dump.c (restore_section_callback): Update.
2640 * fbsd-nat.c (fbsd_find_memory_regions): Update.
2641 * frame.c (frame_unwind_register_value): Update.
2642 * gcore.c (gcore_create_callback): Update.
2643 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
2644 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
2645 i386_record_lea_modrm_addr, i386_record_lea_modrm,
2646 i386_process_record): Update.
2647 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
2648 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
2649 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
2650 * infrun.c (displaced_step_prepare, displaced_step_fixup,
2651 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
2652 insert_longjmp_resume_breakpoint): Update.
2653 * linux-nat.c (linux_nat_find_memory_regions): Update.
2654 * linux-record.c (record_linux_system_call): Update.
2655 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
2656 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
2657 mips_o64_push_dummy_call): Update.
2658 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
2659 * record.c (record_arch_list_add_mem, record_wait,
2660 record_xfer_partial): Update.
2661 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
2662 mips_common_breakpoint): Update.
2663 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
2664 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
2665 * solib-som.c (som_current_sos): Update.
2666 * symfile.c (load_progress, generic_load): Update.
2667 * symfile-mem.c (add_vsyscall_page): Update.
2668 * valops.c (value_fetch_lazy): Update.
2669 * windows-tdep.c (windows_xfer_shared_library): Update.
2671 Update callers of paddr_nz to use paddress instead (changing
2672 user-visible output to make it more correct):
2673 * dwarf2loc.c (locexpr_describe_location): Update.
2674 * ia64-tdep.c (ia64_memory_insert_breakpoint,
2675 ia64_memory_remove_breakpoint): Update.
2676 * jv-valprint.c (java_value_print): Update.
2677 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
2678 * monitor.c (monitor_read_memory): Update.
2680 Update callers of paddr to use paddress instead (changing
2681 user-visible output to make it more correct):
2682 * arm-tdep.c (arm_push_dummy_call): Update.
2683 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
2684 create_breakpoint): Update.
2685 * darwin-nat-info.c (darwin_debug_regions): Update.
2686 * dcache.c (dcache_info): Update.
2687 * dsrec.c (load_srec, make_srec): Update.
2688 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
2689 dwarf2_frame_cache): Update.
2690 * gcore.c (gcore_copy_callback): Update.
2691 * gnu-nat.c (gnu_xfer_memory): Update.
2692 * mips-linux-nat.c (mips_show_dr): Update.
2693 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
2694 monitor_remove_breakpoint): Update.
2695 * remote.c (compare_sections_command): Update.
2696 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
2697 m32r_remove_breakpoint, m32r_insert_watchpoint,
2698 m32r_remove_watchpoint): Update.
2699 * sol-thread.c (info_cb): Update.
2700 * symfile.c (load_progress): Update.
2702 Update callers of paddress or paddr_nz to use hex_string instead
2703 (changes output of internal/error/debug messages only):
2704 * dwarf2read.c (dump_die_shallow): Update.
2705 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
2706 get_frame_func, create_new_frame): Update.
2707 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
2708 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
2709 ia64_get_dyn_info_list): Update.
2710 * maint.c (maintenance_translate_address): Update.
2711 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
2712 * target.c (target_flash_erase): Update.
2714 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
2715 using an appropriate address size. Remove use of strlen_paddr.
2716 * exec.c (exec_files_info): Update.
2717 * i386-nat.c (i386_show_dr): Update.
2718 * remote.c (remote_flash_erase): Update.
2719 * m32r-rom.c (m32r_load_section): Update.
2720 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
2721 * remote.c (remote_check_symbols, remote_search_memory): Update.
2722 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
2723 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
2724 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
2725 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
2726 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
2727 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
2728 sh_dsp_show_regs): Update.
2729 * xcoffsolib.c (sharedlibrary_command): Update.
2732 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
2733 Use hex_string_custom instead of paddr.
2734 (print_bfd_section_info): Pass address size.
2735 (print_objfile_section_info): Likewise.
2737 * annotate.h (annotate_source): Add GDBARCH parameter.
2738 (annotate_frame_begin): Likewise.
2739 * annotate.c (annotate_source): Add GDBARCH parameter.
2740 (annotate_frame_begin): Likewise.
2741 * source.c (identify_source_line): Update call to annotate_source.
2742 * stack.c (print_frame_info, print_frame): Update call to
2743 annotate_frame_begin.
2745 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
2746 (create_breakpoint, create_ada_exception_breakpoint): Update call.
2748 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
2749 (print_frame_label_vars): Update call.
2751 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
2752 (dump_psymtab): Update call to print_partial_symbols.
2753 (struct print_symbol_args): Add GDBARCH member.
2754 (dump_symtab_1): Set print_symbol_args architecture member.
2755 (print_symbol): Use it.
2757 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
2759 * windows-tdep.c (windows_xfer_shared_library): Likewise.
2760 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
2761 (core_process_module_section): Pass architecture from cpms_data to
2762 windows_xfer_shared_library.
2763 (windows_core_xfer_shared_libraries): Initialize cmps_data
2764 architecture member.
2765 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
2766 to windows_xfer_shared_library.
2768 * defs.h (print_address): Add GDBARCH parameter.
2769 * printcmd.c (print_address): Add GDBARCH parameter.
2770 (print_scalar_formatted, do_examine): Update call.
2771 * findcmd.c (find_command): Update call.
2772 * tracepoint.c: Include "arch-utils.h".
2773 (trace_find_line_command): Update call.
2774 * tui/tui-disasm.c (tui_disassemble): Update call.
2776 * value.h (print_address_demangle): Add GDBARCH parameter.
2777 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
2778 * c-valprint.c (print_function_pointer_address, c_val_print):
2780 * f-valprint.c (f_val_print): Update call.
2781 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
2782 * jv-valprint.c (java_val_print): Update call.
2783 * m2-valprint.c (print_function_pointer_address, m2_val_print):
2785 * p-valprint.c (pascal_val_print): Update call.
2787 * disasm.c (gdb_disassemble_info): Install architecture into
2788 di.application_data field.
2790 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2792 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
2793 (gdb_print_insn): Likewise.
2794 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
2796 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
2798 (do_assembly_only): Likewise.
2799 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
2800 current_gdbarch. Pass to subroutines.
2801 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
2804 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
2805 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
2806 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
2807 (print_frame_info): Pass architecture to do_gdb_disassembly.
2809 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
2811 * mi/mi-cmd-disas.c: Include "arch-utils.h"
2812 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
2814 * cli/cli-cmds.c: Include "arch-utils.h".
2815 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
2816 and tui_show_assembly.
2817 (disassemble_current_function): Pass architecture to
2818 tui_get_low_disassembly_address and print_disassembly.
2819 (disassemble_command): Pass architecture to
2820 tui_get_low_disassembly_address and print_disassembly.
2822 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
2823 tui_update_source_windows_with_addr.
2825 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
2826 (struct tui_source_info): Likewise.
2827 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
2829 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
2830 Pass to gdb_print_insn.
2831 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
2833 (tui_set_disassem_content): Add GDBARCH parameter. Install into
2834 source_info.gdbarch. Pass to tui_disassemble.
2835 (tui_show_disassem): Add GDBARCH parameter. Pass to
2836 tui_update_source_window.
2837 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
2838 tui_show_disassem and tui_update_source_window.
2840 (tui_get_begin_asm_address): Return locator architecture in addition
2841 to locator PC value.
2843 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
2844 tui_get_low_disassembly_address.
2846 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
2848 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
2849 (tui_show_disassem): Likewise.
2850 (tui_show_disassem_and_update_source): Likewise.
2851 (tui_get_begin_asm_address): Return architecture and PC value.
2853 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
2854 (tui_show_assembly): Add GDBARCH parameter.
2856 * tui/tui-layout.c (extract_display_start_addr): Return current window
2857 architecture in addition to current PC value.
2859 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
2860 extract_display_start_addr. Pass architecture to
2861 tui_update_source_windows_with_addr.
2863 * tui/tui-source.c: Include "objfiles.h".
2864 (tui_set_source_content): Initialize window architecture.
2865 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
2866 tui_update_source_window_as_is
2868 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
2870 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
2871 Install locator architecture.
2872 (tui_set_locator_filename): Update call.
2873 (tui_show_frame_info): Pass architecture to tui_set_locator_info
2876 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
2877 to tui_update_source_window.
2879 * tui/tui-winsource.c: Include "objfiles.h".
2880 (tui_display_main): Update call to tui_get_begin_asm_address.
2881 Pass architecture to tui_update_source_windows_with_addr.
2882 (tui_update_source_window): Add GDBARCH parameter. Pass to
2883 tui_update_source_window_as_is.
2884 (tui_update_source_window_as_is): Add GDBARCH parameter.
2885 Pass to tui_set_disassem_content.
2886 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
2887 Pass to subroutines.
2888 (tui_update_source_windows_with_line): Pass objfile architecture
2890 (tui_horizontal_source_scroll): Pass architecture to
2891 tui_update_source_window_as_is.
2893 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
2895 (tui_update_source_window_as_is): Likewise.
2896 (tui_update_source_windows_with_addr): Likewise.
2898 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2900 * breakpoint.h (struct breakpoint): New member GDBARCH.
2901 * breakpoint.c: Include "arch-utils.h".
2902 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
2903 Use it to set breakpoint architecture.
2904 (set_raw_breakpoint): Add GDBARCH parameter.
2905 (create_internal_breakpoint): Likewise.
2906 (create_catchpoint): Likewise.
2907 (create_fork_vfork_event_catchpoint): Likewise.
2908 (create_breakpoint): Likewise.
2909 (create_breakpoints): Likewise.
2910 (break_command_really): Likewise.
2911 (create_ada_exception_breakpoint): Likewise.
2912 Update local callers to pass architecture:
2913 (create_internal_breakpoint): Update.
2914 (create_overlay_event_breakpoint): Update.
2915 (create_longjmp_master_breakpoint): Update.
2916 (create_thread_event_breakpoint): Update.
2917 (create_solib_event_breakpoint): Update.
2918 (create_catchpoint): Update.
2919 (create_fork_vfork_event_catchpoint): Update.
2920 (set_momentary_breakpoint): Update.
2921 (clone_momentary_breakpoint): Update.
2922 (create_breakpoint): Update.
2923 (create_breakpoints): Update.
2924 (break_command_really): Update.
2925 (break_command_1): Update.
2926 (set_breakpoint): Update.
2927 (watch_command_1): Update.
2928 (catch_fork_command_1): Update.
2929 (catch_exec_commnd_1): Update.
2930 (handle_gnu_v3_exceptions): Update.
2931 (create_ada_exception_breakpoint): Update.
2932 (catch_ada_exception_command): Update.
2933 (catch_assert_command): Update.
2934 (trace_command): Update.
2936 * breakpoint.h (struct bp_location): New member GDBARCH.
2937 * breakpoint.c (get_sal_arch): New function.
2938 (set_raw_breakpoint): Set location architecture.
2939 (add_location_to_breakpoint): Likewise.
2940 (clone_momentary_breakpoint): Likewise.
2941 (watch_command_1): Likewise.
2942 (update_watchpoint): Likewise.
2943 (bp_loc_is_permanent): Use location architecture instead of
2945 (adjust_breakpoint_address): Add GDBARCH parameter; use it
2946 instead of current_gdbarch.
2947 Update callers of adjust_breakpoint_address to pass
2948 breakpoint location architecture:
2949 (set_raw_breakpoint): Update.
2950 (watch_command_1): Update.
2952 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
2954 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
2955 (encode_actions): Pass tracepoint architecture to add_local_symbols
2956 (encode_actions): Use tracepoint architecture instead of
2957 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
2959 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
2960 of print_one callback with last_loc.
2961 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
2962 parameter with last_loc.
2963 (print_one_breakpoint): Likewise.
2964 (do_captured_breakpoint_query): Update call.
2965 (breakpoint_1): Pass last_loc instead of last_addr to
2966 print_one_breakpoint. Pass last location architecture instead of
2967 current_gdbarch to set_next_address.
2968 Update all implementations of the print_one callback:
2969 * breakpoint.c (print_one_catch_fork): Update.
2970 (print_one_catch_vfork): Update.
2971 (print_one_catch_exec): Update.
2972 (print_one_exception_catchpoint): Update.
2973 * ada-lang.c (print_one_exception): Update.
2974 (print_one_catch_exception): Update.
2975 (print_one_catch_exception_unhandled): Update.
2976 (print_one_catch_assert): Update.
2978 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
2979 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
2980 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
2981 to print_one_breakpoint_location.
2982 (breakpoint_address_bits): New function.
2983 (do_captured_breakpoint_query): Compute number of address bits to print
2984 and pass it to print_one_breakpoint.
2985 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
2987 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
2988 * breakpoint.c (create_thread_event_breakpoint): Likewise.
2989 Update callers to create_thread_event_breakpoint:
2990 * aix-thread.c (pd_enable): Update.
2991 * linux-thread-db.c (enable_thread_event): Update.
2993 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
2994 * breakpoint.c (create_solib_event_breakpoint): Likewise.
2995 Update callers to create_solib_event_breakpoint:
2996 * solib-frv.c (enable_break, enable_break2): Update.
2997 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
2998 * solib-som.c (som_solib_create_inferior_hook): Update.
2999 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
3000 * solib-svr4.c (enable_break): Update.
3002 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
3003 * breakpoint.c (insert_single_step_breakpoint): Likewise.
3004 Update callers to insert_single_step_breakpoint:
3005 * alpha-tdep.c (alpha_software_single_step): Update.
3006 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
3007 * arm-tdep.c (arm_software_single_step): Update.
3008 * cris-tdep.c (cris_software_single_step): Update.
3009 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
3010 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
3011 * sparc-tdep.c (sparc_software_single_step): Update.
3012 * spu-tdep.c (spu_software_single_step): Update.
3013 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
3014 Pass it to insert_single_step_breakpoint.
3015 (mips_software_single_step): Pass architecture to
3016 deal_with_atomic_sequence and insert_single_step_breakpoint.
3018 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
3019 (deprecated_remove_raw_breakpoint): Likewise.
3020 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
3021 (deprecated_remove_raw_breakpoint): Likewise.
3022 Update callers to deprecated_insert_raw_breakpoint and
3023 deprecated_remove_raw_breakpoint:
3024 * breakpoint.c (single_step_gdbarch): New static variable.
3025 (insert_single_step_breakpoint): Pass GDBARCH parameter to
3026 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
3027 (remove_single_step_breakpoints): Pass architecture stored in
3028 single_step_gdbarch to deprecated_remove_raw_breakpoint.
3029 * rs6000-nat.c (exec_one_dummy_insn): Update.
3030 * solib-irix.c (enable_break, disable_break): Update.
3031 * procfs.c (procfs_mourn_inferior): Update.
3032 (remove_dbx_link_breakpoint): Update.
3034 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
3035 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3036 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
3037 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3038 Update callers to set_breakpoint, set_momentary_breakpoint and
3039 set_momentary_breakpoint_at_pc:
3040 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
3041 (until_break_command): Update.
3042 * infcall.c (call_function_by_hand): Update.
3043 * infcmd.c (finish_backward, finish_forward): Update.
3044 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
3045 parameter. Pass it to set_momentary_breakpoint.
3046 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
3047 Pass it to set_momentary_breakpoint_at_pc.
3048 (handle_inferior_event): Update.
3049 (insert_step_resume_breakpoint_at_frame): Update.
3050 (insert_step_resume_breakpoint_at_caller): Update..
3051 * mi/mi-cmd-break.c: Include "arch-utils.h".
3052 (mi_cmd_break_insert): Update.
3054 * target.h (struct target_ops): Add GDBARCH parameter to
3055 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
3056 and to_remove_hw_breakpoint members.
3057 (target_insert_breakpoint, target_remove_breakpoint,
3058 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
3059 parameter, pass to target routine.
3060 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
3062 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
3063 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
3064 GDBARCH parameter, pass to target routine.
3065 (update_current_target): Update function signature.
3066 * breakpoint.c (insert_bp_location, remove_breakpoint,
3067 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
3068 Pass architecture to target_ routines.
3069 Update all implementations of the target breakpoint routines to take
3070 GDBARCH parameter and use it instead of GDBARCH as appropriate:
3071 * corelow.c (ignore): Update.
3072 * exec.c (ignore): Update.
3073 * mem-break.c (memory_insert_breakpoint): Update.
3074 (memory_remove_breakpoint): Update.
3075 * monitor.c (monitor_insert_breakpoint): Update.
3076 (monitor_remove_breakpoint): Update.
3077 * record.c (record_insert_breakpoint): Update.
3078 (record_beneath_to_insert_breakpoint): Update.
3079 (record_remove_breakpoint): Update.
3080 (record_beneath_to_remove_breakpoint): Update.
3081 * remote.c (remote_insert_breakpoint): Update.
3082 (remote_remove_breakpoint): Update.
3083 (remote_insert_hw_breakpoint): Update.
3084 (remote_remove_hw_breakpoint): Update.
3085 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
3086 (m32r_remove_breakpoint): Update.
3087 * remote-mips.c (mips_insert_breakpoint): Update.
3088 (mips_remove_breakpoint): Update.
3089 * i386-nat.c (i386_insert_hw_breakpoint): Update.
3090 (i386_remove_hw_breakpoint): Update.
3091 * nto-procfs.c (procfs_insert_breakpoint): Update.
3092 (procfs_remove_breakpoint): Update.
3093 (procfs_insert_hw_breakpoint): Update.
3094 (procfs_remove_hw_breakpoint): Update.
3096 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3098 * frame.h (frame_unwind_arch): New.
3099 (frame_unwind_caller_arch): Likewise.
3100 * frame-unwind.h (frame_prev_arch_ftype): New type.
3101 (struct frame_unwind): New member prev_arch.
3102 * frame.c (struct frame_info): New member prev_arch.
3103 (frame_unwind_arch): New function.
3104 (frame_unwind_caller_arch): Likewise..
3105 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
3106 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
3107 (sentinel_frame_unwinder): Install it.
3109 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
3111 (frame_unwind_register_value): Likewise.
3112 (frame_unwind_register_signed): Likewise.
3113 (frame_unwind_register_unsigned): Likewise.
3114 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
3115 (frame_unwind_got_register): Likewise.
3116 (frame_unwind_got_constant): Likewise.
3117 (frame_unwind_got_bytes): Likewise.
3118 (frame_unwind_got_address): Likewise.
3120 * frame.h (enum frame_type): New value ARCH_FRAME.
3121 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
3122 * stack.c (print_frame_info): Likewise.
3124 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3126 * target.h (struct target_ops): New member to_thread_architecture.
3127 (target_thread_architecture): New macro.
3128 * target.c (update_current_target): Inherit to_thread_architecture.
3129 (default_thread_architecture): New function.
3130 (debug_to_thread_architecture): New function.
3131 (setup_target_debug): Handle to_thread_architecture.
3133 * regcache.h (get_thread_arch_regcache): New.
3134 * regcache.c (struct regcache_list): New data type.
3135 (current_regcache): Hold regcache list instead of single regcache.
3136 (current_thread_ptid, current_thread_arch): New static variables.
3137 (get_thread_arch_regcache): New function.
3138 (get_thread_regcache): Use it. Call target_thread_architecture.
3139 (regcache_thread_ptid_changed): Update to current_regcache changes.
3140 (registers_changed): Likewise. Reset current_thread_arch and
3141 current_thread_ptid.
3143 * remote.c (remote_wait): Access target registers in target_gdbarch.
3144 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
3145 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
3146 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
3147 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
3148 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
3149 * solib-svr4.c (enable_break): Likewise.
3150 (svr4_relocate_main_executable): Likewise.
3152 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3154 * python/python-internal.h (struct language_defn): Declare.
3155 (python_gdbarch, python_language): Likewise.
3156 (ensure_python_env): Add prototype.
3157 (make_cleanup_py_restore_gil): Remove prototype.
3159 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
3160 (python_gdbarch, python_language): New global variables.
3161 (struct python_env): New data type.
3162 (ensure_python_env, restore_python_env): New functions.
3163 (eval_python_from_control_command): Call ensure_python_env to
3164 install current architecture and language.
3165 (python_command, gdbpy_new_objfile): Likewise.
3166 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
3167 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
3169 * python/python-type.c (clean_up_objfile_types): Likewise.
3170 * python/python-objfile.c: Include "language.h".
3171 (clean_up_objfile): Call ensure_python_env.
3172 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
3173 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
3174 * varobj.c (varobj_ensure_python_env): New helper function.
3175 (varobj_get_display_hint, update_dynamic_varobj_children,
3176 install_default_visualizer, varobj_set_visualizer, free_variable,
3177 value_get_print_value): Call it.
3178 (value_get_print_value): Add varobj argument instead of pretty
3179 printer argument. Update all callers.
3181 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
3184 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
3185 (call_internal_function): Likewise.
3186 * value.c (call_internal_function): Likewise. Pass to handler.
3187 * eval.c (evaluate_subexp_standard): Update call.
3188 * python/python-function.c: Include "language.h".
3189 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
3190 make_cleanup_python_env.
3192 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
3193 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
3194 valpy_str): Use python_gdbarch and python_language instead of
3195 current_gdbarch and current_language.
3196 * python/python-type.c (typy_lookup_typename): Likewise.
3198 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3200 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
3201 (show_endian): Use target_byte_order_user if specified; otherwise
3202 use get_current_arch () instead of current_gdbarch.
3203 (show_architecture): Use set_architecture_string if specified;
3204 otherwise use get_current_arch () instead of current_gdbarch.
3205 (get_current_arch): New function.
3206 * arch-utils.h (get_current_arch): Add prototype.
3208 * osabi.c (show_osabi): Use get_current_arch () instead of
3211 * findcmd.c: Include "arch-utils.h".
3212 (parse_find_args): Add BIG_P argument. Use it instead of byte order
3214 (find_command): Use get_current_arch () instead of current_gdbarch.
3215 Pass byte order to parse_find_args.
3217 * maint.c: Include "arch-utils.h".
3218 (maintenance_print_architecture): Use get_current_arch () instead
3221 * reggroups.c: Include "arch-utils.h".
3222 (maintenance_print_reggroups): Use get_current_arch () instead
3225 * symfile.c: Include "arch-utils.h".
3226 (overlay_load_command): Use get_current_arch () instead of
3229 * value.c: Include "arch-utils.h".
3230 (show_convenience): Use get_current_arch () instead of
3233 * tui/tui-regs.c: Include "arch-utils.h".
3234 (tui_reg_next_command): Use get_current_arch () instead of
3237 * mi/mi-main.c: Include "arch-utils.h".
3238 (mi_cmd_data_read_memory): Use get_current_arch () instead of
3241 * parse.c: Include "arch-utils.h".
3242 (parse_exp_in_context): Use get_current_arch () instead of
3245 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3247 * gdbtypes.c (make_pointer_type, make_reference_type,
3248 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
3249 Use type architecture instead of current_gdbarch.
3251 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
3252 Add GDBARCH paramter.
3253 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
3254 Add GDBARCH parameter. Use it instead of current_gdbarch.
3255 * c-typeprint.c (c_type_print_modifier): Update call.
3256 * parse.c (push_type_address_space): Likewise.
3258 * findvar.c (extract_typed_address, store_typed_address): Use type
3259 architecture instead of current_gdbarch.
3261 * value.c (value_as_address, unpack_field_as_long): Use type architecture
3262 instead of current_gdbarch.
3264 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
3265 instead of current_gdbarch.
3266 (floatformat_from_type): Pass type architecture.
3268 * infcall.c (find_function_addr): Use type architecture instead
3271 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
3272 value_bit_index): Use type architecture instead of current_gdbarch.
3273 * valops.c (value_cast, value_slice): Likewise.
3275 * value.h (modify_field): Add TYPE argument.
3276 * value.c (modify_field): Add TYPE argument. Use type architecture
3277 instead of current_gdbarch.
3278 (set_internalvar_component): Likewise.
3279 * eval.c (evaluate_struct_tuple): Update call.
3280 * valops.c (value_assign): Likewise.
3281 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
3282 (make_array_descriptor): Update calls.
3283 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
3285 (ada_value_assign, value_assign_to_component): Update calls.
3286 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
3287 value_assign_to_component): Use type arch instead of current_gdbarch.
3289 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
3290 use type architecture instead.
3291 (print_scalar_formatted, printf_command): Update calls. Use type
3292 architecture instead of current_gdbarch.
3293 * valprint.c (val_print_type_code_int): Use type architecture
3294 instead of current_gdbarch.
3295 * varobj.c (value_get_print_value): Likewise.
3296 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
3297 argument. Use it instead of current_gdbarch.
3298 (apply_val_pretty_printer): Update call.
3300 * ada-valprint.c (ada_val_print_1): Use type architecture instead
3302 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
3303 Use it instead of current_gdbarch.
3304 (c_val_print): Update calls passing type architecture.
3305 * f-valprint.c (f_val_print): Use type architecture instead of
3307 * jv-valprint (java_value_print): Likewise.
3308 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
3309 Use it instead of current_gdbarch.
3310 (print_unpacked_pointer): Update calls passing type architecture.
3311 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
3314 * gnu-v3-abi.c (get_class_arch): Remove.
3315 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
3316 special-case check for Java classes.
3317 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
3318 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
3319 Use get_type_arch instead of get_class_arch.
3321 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3323 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
3324 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
3325 (alloc_type_arch): Add prototype.
3326 (alloc_type_copy): Likewise.
3327 (get_type_arch): Likewise.
3328 (arch_type): Likewise.
3329 (arch_integer_type): Likewise.
3330 (arch_character_type): Likewise.
3331 (arch_boolean_type): Likewise.
3332 (init_float_type): Remove, replace by ...
3333 (arch_float_type): ... this.
3334 (init_complex_type): Remove, replace by ...
3335 (arch_complex_type): ... this.
3336 (init_flags_type): Remove, replace by ...
3337 (arch_flags_type): ... this.
3338 (init_composite_type): Remove, replace by ...
3339 (arch_composite_type): ... this.
3341 * gdbtypes.c (alloc_type): No longer support NULL objfile.
3342 (init_type): Likewise.
3343 (alloc_type_arch): New function.
3344 (alloc_type_copy): New function.
3345 (get_type_arch): New function.
3347 (smash_type): Preserve type ownership information.
3348 (make_pointer_type, make_reference_type, make_function_type,
3349 smash_to_memberptr_type, smash_to_method_type): No longer
3350 preserve OBJFILE across smash_type calls.
3351 (make_pointer_type, make_reference_type, make_function_type,
3352 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
3353 create_range_type, create_array_type, create_set_type, copy_type):
3354 Use alloc_type_copy when allocating types.
3355 (check_typedef): Use alloc_type_arch.
3356 (copy_type_recursive): Likewise. Preserve type ownership data
3358 (recursive_dump_type): Dump type ownership data.
3359 (alloc_type_instance): Update type ownership check.
3360 (copy_type, copy_type_recursive): Likewise.
3362 (arch_type): New function.
3363 (arch_integer_type): Likewise.
3364 (arch_character_type): Likewise.
3365 (arch_boolean_type): Likewise.
3366 (init_float_type): Remove, replace by ...
3367 (arch_float_type): ... this.
3368 (init_complex_type): Remove, replace by ...
3369 (arch_complex_type): ... this.
3370 (init_flags_type): Remove, replace by ...
3371 (arch_flags_type): ... this.
3372 (append_flags_type_flag): Move down.
3373 (init_composite_type): Remove, replace by ...
3374 (arch_composite_type): ... this.
3375 (append_composite_type_field_aligned,
3376 append_composite_type_field): Move down.
3378 * gdbarch.c (gdbtypes_post_init): Allocate all types
3379 using per-architecture routines.
3380 * ada-lang.c (ada_language_arch_info): Likewise.
3381 * f-lang.c (build_fortran_types): Likewise.
3382 * jv-lang.c (build_java_types): Likewise.
3383 * m2-lang.c (build_m2_types): Likewise.
3384 * scm-lang.c (build_scm_types): Likewise.
3386 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
3387 (packed_array_type): Likewise.
3388 (ada_template_to_fixed_record_type_1): Likewise.
3389 (template_to_static_fixed_type): Likewise.
3390 (to_record_with_fixed_variant_part): Likewise.
3391 (to_fixed_variant_branch_type): Likewise.
3392 (to_fixed_array_type): Likewise.
3393 (to_fixed_range_type): Likewise.
3394 (empty_record): Use type instead of objfile argument.
3395 Use alloc_type_copy.
3396 (to_fixed_variant_branch_type): Update call to empty_record.
3397 * jv-lang.c (type_from_class): Use alloc_type_arch.
3399 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
3400 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
3401 i386_mmx_type, i386_sse_type): Likewise.
3402 * ia64-tdep.c (ia64_ext_type): Likewise.
3403 * m32c-tdep.c (make_types): Likewise.
3404 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
3405 * rs6000-tdep.c (rs6000_builtin_type_vec64,
3406 rs6000_builtin_type_vec128): Likewise.
3407 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
3408 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
3409 sparc64_fprs_type): Likewise.
3410 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
3411 * xtensa-tdep.c (xtensa_register_type): Likewise.
3412 * linux-tdep.c (linux_get_siginfo_type): Likewise.
3413 * target-descriptions.c (tdesc_gdb_type): Likewise.
3414 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
3416 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3418 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
3419 i386_mxcsr_type members.
3420 (i386_eflags_type): Make into function.
3421 (i386_mxcsr_type): Likewise.
3422 * i386-tdep.c (i386_eflags_type): Make into function.
3423 (i386_mxcsr_type): Likewise.
3424 (i386_register_type): Update uses.
3425 (i386_init_types): Remove.
3426 (_initialize_i386_tdep): Do not call it.
3427 * amd64-tdep.c (amd64_register_type): Update uses.
3429 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
3430 * m68k-tdep.c (m68k_ps_type): Make into function.
3431 (m68k_register_type): Update use.
3432 (m68k_init_types): Remove.
3433 (_initialize_m68k_tdep): Do not call it.
3435 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
3436 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
3437 sparc64_fprs_type members.
3438 * sparc-tdep.c (sparc_psr_type): Make into function.
3439 (sparc_fsr_type): Likewise.
3440 (sparc32_register_type): Update uses.
3441 (sparc_init_types): Remove.
3442 (_initialize_sparc_tdep): Do not call it.
3443 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
3444 (sparc64_fsr_type): Likewise.
3445 (sparc64_fprs_type): Likewise.
3446 (sparc64_register_type): Update uses.
3447 (sparc64_init_types): Remove.
3448 (_initialize_sparc64_tdep): Likewise.
3450 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3452 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
3453 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
3454 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
3455 (init_float_type, init_complex_type): Add prototypes.
3456 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
3457 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
3458 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
3459 (_initialize_gdbtypes): Do not initialize them.
3460 (build_flt): Rename to ...
3461 (init_float_type): ... this. Make global.
3462 (build_complex): Rename to ...
3463 (init_complex_type): ... this. Make global. Remove BIT argument.
3464 (gdbtypes_post_init): Update calls.
3466 * ada-lang.c (ada_language_arch_info): Use init_float_type.
3467 * jv-lang.c (build_java_types): Likewise.
3468 * m2-lang.c (build_m2_types): Likewise.
3469 * f-lang.c (build_fortran_types): Use init_float_type and
3472 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
3473 of using builtin_type_ieee_single, builtin_type_ieee_double, or
3474 builtin_type_arm_ext.
3476 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
3477 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
3478 (_initialize_ia64_tdep): Do not initialize it.
3479 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
3481 (ia64_ext_type): New function.
3482 (ia64_register_reggroup_p, ia64_convert_register_p,
3483 ia64_register_to_value, ia64_value_to_register,
3484 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
3485 instead of builtin_type_ia64_ext.
3487 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
3488 (i387_ext_type): Add prototype.
3489 * i386-tdep.c (i387_ext_type): New function.
3490 (i386_extract_return_value, i386_store_return_value,
3491 i386_register_type): Use it instead of builtin_type_i387_ext.
3492 * amd64-tdep.c (amd64_register_type): Likewise.
3493 * i387-tdep.c (print_i387_value, i387_register_to_value,
3494 i387_value_to_register): Likewise.
3495 (print_i387_value, print_i387_ext): Add GDBARCH argument.
3496 (print_i387_ext, i387_print_float_info): Pass to subroutines.
3498 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
3499 * m68k-tdep.c (m68881_ext_type): New function.
3500 (m68k_register_type, m68k_convert_register_p): Use it instead
3501 of builtin_type_m68881_ext.
3503 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
3504 * arm-tdep.c (arm_ext_type): New function.
3505 (arm_register_type): Use it instead of builtin_type_arm_ext.
3507 * alpha-tdep.c (alpha_register_type): Use builtin types
3508 instead of builtin_type_ieee_double.
3510 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
3512 (mips_register_type): Use builtin types instead of
3513 builtin_type_ieee_single and builtin_type_ieee_double.
3514 (mips_print_fp_register): Use builtin types instead of
3515 mips_float_register_type and mips_double_register_type.
3517 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
3518 Use builtin types instead of builtin_type_ieee_single and
3519 builtin_type_ieee_double.
3521 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3523 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
3524 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
3525 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
3526 builtin_type_int128, builtin_type_uint128): Remove.
3527 (struct builtin_type): New members builtin_int0, builtin_int8,
3528 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
3529 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
3530 and builtin_uint128.
3531 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
3532 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
3533 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
3534 builtin_type_int128, builtin_type_uint128): Remove.
3535 (_initialize_gdbtypes): Do not initialize them.
3536 (gdbtypes_post_init): Initialize fixed-size integer types.
3538 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
3539 GDBARCH argument. Return platform-specific type.
3540 (dwarf2_read_address, execute_stack_op): Update calls.
3542 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
3543 instead of global builtin_int_... variables.
3544 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
3545 * printcmd.c (do_examine): Likewise.
3546 * jv-exp.y (parse_number): Likewise.
3548 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
3549 alpha_store_return_value): Likewise.
3550 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
3551 * amd64-tdep.c (amd64_register_type): Likewise.
3552 * arm-tdep.c (arm_register_type): Likewise.
3553 * avr-tdep.c (avr_register_type): Likewise.
3554 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
3555 * frv-tdep.c (frv_register_type): Likewise.
3556 * h8300-tdep.c h8300_register_type): Likewise.
3557 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
3558 hppa64_register_type): Likewise.
3559 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
3560 * iq2000-tdep.c (iq2000_register_type): Likewise.
3561 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
3562 * m32r-tdep.c (m32r_register_type): Likewise.
3563 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
3564 m68hc11_pseudo_register_write): Likewise.
3565 * m68k-tdep.c (m68k_register_type): Likewise.
3566 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
3567 * mep-tdep.c (mep_register_type): Likewise.
3568 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
3569 mips_print_fp_register): Likewise.
3570 * moxie-tdep.c (moxie_register_type): Likewise.
3571 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
3572 * rs6000-tdep.c (rs6000_builtin_type_vec64,
3573 rs6000_builtin_type_vec128): Likewise.
3574 * score-tdep.c (score_register_type): Likewise.
3575 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
3577 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
3579 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
3580 * v850-tdep.c (v850_register_type): Likewise.
3581 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
3582 * xtensa-tdep.c (xtensa_register_type): Likewise.
3584 * mt-tdep.c (struct gdbarch_tdep): New data structure.
3585 (mt_gdbarch_init): Alloc TDEP structures.
3586 (mt_register_type): Cache coprocessor type in TDEP instead of
3587 static global variable.
3589 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
3590 * xtensa-tdep.c (type_entries): Remove.
3591 (xtensa_register_type): Cache fixed-size types in TDEP instead
3592 of in global variable.
3594 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3596 * gdbtypes.h (builtin_type_true_char): Remove.
3597 (builtin_type_true_unsigned_char): Likewise.
3598 (struct builtin_type): Add builtin_true_char and
3599 builtin_true_unsigned_char members.
3600 * gdbtypes.c (builtin_type_true_char): Remove.
3601 (builtin_type_true_unsigned_char): Likewise.
3602 (_initialize_gdbtypes): Do not initialize them.
3603 (gdbtypes_post_init): Initialize builtin_true_char and
3604 builtin_true_unsigned_char members of builtin_type.
3606 * printcmd.c (print_scalar_formatted): Use builtin_type
3607 members instead of builtin_type_true_char and
3608 builtin_type_true_unsigned_char.
3609 * ada-valprint.c (ada_val_print_1): Likewise.
3611 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3613 * gdbtypes.h (builtin_type_void): Remove.
3614 * gdbtypes.c (builtin_type_void): Remove.
3615 (_initialize_gdbtypes): Do not initialize it.
3617 (safe_parse_type): Add GDBARCH argument. Use it to construct
3619 (check_stub_method): Update call.
3621 * infcall.c (call_function_by_hand): Use platform-specific type
3622 instead of builtin_type_void.
3623 * valops.c (value_cast): Use input void type instead of
3626 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3628 * ada-lang.c (assign_component): Use platform-specific integer type
3629 instead of builtin_type_int32 type.
3630 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
3632 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
3633 instead of builtin_type_int8 type.
3634 * valarith.c (value_x_unop): Likewise.
3635 * python/python-value.c (valpy_absolute): Avoid reference to
3636 builtin_type_int8 type.
3638 * eval.c (evaluate_subexp_standard): Use platform-specific integer
3639 type instead of builtin_type_int8 as EVAL_SKIP return value type.
3640 * ada-lang.c (ada_evaluate_subexp): Likewise.
3641 * jv-lang.c (evaluate_subexp_java): Likewise.
3642 * m2-lang.c (evaluate_subexp_modula2): Likewise.
3643 * scm-lang.c (evaluate_exp): Likewise.
3645 * value.h (value_bitstring): Add INDEX_TYPE argument.
3646 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
3647 of builtin_type_int32 as base range type.
3648 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
3650 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3652 * gdbtypes.c (lookup_array_range_type): Add prototype.
3653 (lookup_string_range_type): Likewise.
3654 * gdbtypes.c (lookup_array_range_type): New function.
3655 (lookup_string_range_type): Likewise.
3657 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
3658 * parse.c (follow_types): Likewise.
3659 * jv-lang.c (java_array_type): Likewise.
3660 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
3661 * mt-tdep.c (mt_register_type): Likewise.
3662 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
3663 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
3664 * value.c (allocate_repeat_value): Likewise.
3665 * valops.c (value_array, value_cstring): Likewise.
3666 * valops.c (value_string): Use lookup_string_range_type.
3668 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3670 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
3671 redundant check for NULL TYPE_TARGET_TYPE.
3672 * m2-valprint.c (m2_print_long_set): Likewise.
3673 * p-valprint.c (pascal_type_print_base): Likewise.
3675 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3677 * printcmd.c (next_gdbarch): New static variable.
3678 (set_next_address, do_examine, x_command): Set it.
3679 (decode_format): Use 'a' size to indicate width of an address.
3680 (do_examine): Add GDBARCH argument. Handle 'a' size.
3681 (x_command): Pass architecture to do_examine.
3682 Error if called without argument the first time.
3683 (do_one_display): Pass architecture to do_examine.
3685 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
3686 examine_g_type): Remove.
3687 (_initialize_printcmd): Do not initialize them.
3688 (do_examine): Use builin_type_int... instead of examine_..._type.
3690 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3692 * gdbtypes.h (struct builtin_type): Add internal_fn member.
3693 * gdbtypes.c (gdbtypes_post_init): Initialize it.
3694 * value.c (internal_fn_type): Remove.
3695 (_initialize_values): Do not initialize it.
3697 * value.c (struct internalvar): Add enum internalvar_kind type and
3698 kind member. Restructure union internalvar_data type. Remove type,
3699 canonical, and make_value members.
3700 (init_if_undefined_command): Update for data structure changes.
3701 (create_internalvar): Likewise.
3702 (create_internalvar_type_lazy): Likewise.
3703 (get_internalvar_integer): Likewise.
3704 (get_internalvar_function): Likewise.
3705 (set_internalvar_component): Likewise.
3706 (set_internalvar): Likewise.
3707 (set_internalvar_integer): Likewise.
3708 (set_internalvar_function): Likewise.
3709 (clear_internalvar): Likewise.
3710 (add_internal_function): Likewise.
3711 (preserve_one_internalvar): New function.
3712 (preserve_values): Call it.
3714 * value.h (value_of_internalvar): Add GDBARCH parameter.
3715 (internalvar_make_value): Likewise.
3716 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
3717 make_value callback. Use it to generate per-architecture result value
3718 types for internal variables with no pre-defined type. Update for data
3720 (show_convenience): Pass architecture to value_of_internalvar.
3721 * eval.c (evaluate_subexp_standard): Likewise.
3722 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
3723 instead of current frame architecture. Return per-architecture type.
3725 * value.h (set_internalvar_string): Add prototype.
3726 * value.c (set_internalvar_string): New function.
3727 * tracepoint.c (set_traceframe_context): Use it.
3729 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3731 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
3732 java_long_type, java_boolean_type, java_char_type, java_float_type,
3733 java_double_type, java_void_type): Remove.
3734 (struct builtin_java_type): New data type.
3735 (builtin_java_type): Add prototype.
3736 (java_primitive_type): Add GDBARCH argument.
3737 (java_primitive_type_from_name): Likewise.
3738 (type_from_class): Likewise.
3740 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
3741 java_long_type, java_boolean_type, java_char_type, java_float_type,
3742 java_double_type, java_void_type): Remove.
3744 (build_java_types, builtin_java_type): New functions.
3745 (java_type_data): New static variable.
3746 (_initialize_java_language): Initialize it. No longer initialize
3748 (java_language_arch_info): Use per-architecture types.
3750 (java_primitive_type): Add GDBARCH argument. Return per-architecture
3751 type instead of refering to global variable.
3752 (java_primitive_type_from_name): Add GDBARCH argument.
3753 (java_primitive_type_name): New function.
3754 (java_demangled_signature_length): Use it instead of
3755 java_primitive_type_from_name.
3756 (java_demangled_signature_copy): Likewise.
3758 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
3759 java_primitive_type, and recursive type_from_class call.
3760 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
3761 calls. Use per-architecture types instead of global types.
3763 * jv-exp.y (parse_java_type): New define.
3764 Use per-architecture types instead of global types througout.
3766 * jv-valprint.c (java_value_print): Pass architecture to
3767 type_from_class and java_primitive_type_from_name. Use per-
3768 architecture types instead of global types.
3770 2009-07-01 Doug Evans <dje@google.com>
3772 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
3773 support for i386-linux, amd64-linux, and i386-win32 builds of
3776 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
3778 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
3780 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
3782 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
3783 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
3786 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
3789 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
3790 cfa_how and cfa_exp into regs and adjust users.
3792 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
3794 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
3796 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
3798 * mi/mi-cmd-stack.c (parse_print_values): New.
3799 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
3801 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
3803 * varobj.c (varobj_get_type): Use type_to_string.
3805 2009-06-29 Pedro Alves <pedro@codesourcery.com>
3807 * infrun.c (handle_inferior_event): Context switch to the new
3808 thread when resuming for a new_thread_event.
3810 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3812 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
3813 * ada-lang.c (convert_actual): Remove stale prototype.
3814 (ensure_lval, make_array_descriptor, ada_convert_actual):
3815 Add GDBARCH argument and pass through to subroutine calls.
3816 (ensure_lval): Use GDBARCH instead of current_gdbarch.
3817 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
3819 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3821 * ada-lang.c (resolve): Use per-architecture void type instead
3822 of platform-independent one.
3823 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
3824 (ada_resolve_function): Reimplement fallback logic to avoid
3825 explicit reference to builtin_type_void.
3827 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3829 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
3830 to indicate scalar should be printed as default integer.
3831 (print_optional_low_bound): Pass NULL to ada_print_scalar to
3832 indicate default integer output.
3833 * ada-typeprint.c (print_range, print_range_bound): Likewise.
3834 (print_choices): Likewise. Thus, accept NULL as val_type.
3835 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
3836 to look up controlling discriminant name.
3838 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3840 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
3841 Fall back to orig_type as index type if symbol lookup fails.
3842 Allocate result types from ORIG_TYPE's objfile.
3843 (ada_array_bound_from_type, to_fixed_array_type,
3844 ada_evaluate_subexp): Pass original index type to
3845 to_fixed_range_type. Do not pass objfile.
3847 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
3848 Fall back to orig_type as index type if symbol lookup fails.
3849 (print_array_type, ada_print_type): Pass original index type
3850 to print_range_type_named.
3852 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3854 * ada-lang.c (ada_index_type): Update comment.
3856 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3858 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
3859 Throw error on invalid input arguments. Return NULL if unable
3860 to determine index type.
3862 (ada_array_bound_from_type): Remove TYPEP argument.
3863 (ada_array_bound): Make static. Return LONGEST instead of value.
3864 Update for ada_array_bound_from_type change.
3865 (ada_array_length): Return LONGEST instead of value.
3866 Update for ada_array_bound_from_type change.
3867 (make_array_descriptor): Update for ada_array_bound change.
3869 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
3870 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
3871 ada_array_bound, ada_array_length, ada_index_type changes.
3872 Always use ada_index_type to compute result type; fall back
3873 to architecture-specific integer type if ada_index_type fails.
3875 * ada-lang.h (ada_index_type): Remove prototype.
3876 (ada_array_bound): Likewise.
3878 2009-06-29 Pedro Alves <pedro@codesourcery.com>
3880 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
3883 2009-06-29 Tom Tromey <tromey@redhat.com>
3885 * README: Mention parallel check.
3887 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
3889 * dwarf2read.c (read_import_statement): Properly set import location
3891 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
3892 inner, char* outer arguments. Updated callers.
3894 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3896 * value.h (value_subscript, value_subscripted_rvalue,
3897 value_bitstring_subscript, value_ptradd): Use LONGEST instead
3898 of value as type of the index argument.
3899 (value_ptrsub): Remove.
3900 * valarith.c (value_subscript, value_subscripted_rvalue,
3901 value_bitstring_subscript, value_ptradd): Use LONGEST instead
3902 of value as type of the index argument.
3903 (value_ptrsub): Remove.
3905 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
3906 value as type of the index argument.
3907 * wrapper.c (gdb_value_subscript): Likewise.
3909 Update calls to gdb_value_subscript, value_subscript,
3910 value_subscripted_rvalue, value_bitstring_subscript and
3911 value_ptradd to use LONGEST instead of value as index
3912 argument type. Use value_ptradd instead of value_ptrsub.
3913 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
3914 ada_tag_name_2): Update.
3915 * ada-tasks.c (read_atcb): Update.
3916 * eval.c (evaluate_subexp_standard): Update.
3917 * valarith.c (value_subscript): Update.
3918 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
3919 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
3920 gnuv3_method_ptr_to_value): Update.
3921 * jv-lang.c (evaluate_subexp_java): Update.
3922 * m2-lang.c (evaluate_subexp_modula2): Update.
3923 * python/python-value.c (valpy_getitem, valpy_binop): Update.
3924 * wrapper.c (gdb_value_subscript): Update.
3925 * varobj.c (c_describe_child): Update.
3927 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3929 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
3930 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
3931 (lookup_function_type): Update call.
3932 * stabsread.c (read_type): Likewise.
3933 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
3934 instead of make_function_type.
3935 * jv-lang.c (type_from_class): Likewise. Do not allocate types
3936 on the fake "dynamics" obstack.
3938 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3940 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
3941 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
3942 and nodebug_tls_symbol members.
3943 (struct objfile_type): New data structure.
3944 (objfile_type): Add prototype.
3945 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
3946 for types no longer in struct builtin_type.
3947 (objfile_type_data): New static variable.
3948 (_initialize_gdbtypes): Initialize it.
3949 (objfile_type): New function.
3951 * gdbtypes.h (builtin_type_error): Remove.
3952 * gdbtypes.c (build_complex): Do not use builtin_type_error.
3953 * symtab.c (builtin_type_error): Remove.
3954 (_initialize_symtab): Remove initialization.
3956 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
3957 rs6000_builtin_type, read_range_type): Use per-objfile types
3958 instead of global or per-architecture builtin types.
3959 * coffread.c (decode_type): Likewise.
3960 * dwarf2read.c (read_array_type, read_tag_string_type,
3961 new_symbol, die_type): Likewise.
3962 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
3963 parse_procedure, psymtab_to_symtab_1): Likewise.
3964 * xcoffread.c (process_xcoff_symbol): Likewise.
3965 * parse.c (write_exp_msymbol): Likewise.
3967 * stabsread.c (rs6000_builtin_type_data): New static variable.
3968 (_initialize_stabsread): Initialize it.
3969 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
3970 types per-objfile instead of globally.
3972 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
3973 instead of current_objfile; pass it to rs6000_builtin_type.
3974 (dbx_alloc_type, read_type, read_range_type): Update calls.
3975 (cleanup_undefined_types_noname): Add OBJFILE argument and
3976 pass it to dbx_lookup_type.
3977 (cleanup_undefined_types): Add OBJFILE argument and pass it
3978 to cleanup_undefined_types_noname.
3979 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
3980 * buildsym.c (end_symtab): Update call.
3982 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3984 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
3985 target_gdbarch instead of current_gdbarch.
3987 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3989 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
3990 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
3993 * configure.tgt: Add comment.
3995 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
3997 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
3999 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4000 Jan Kratochvil <jan.kratochvil@redhat.com>
4002 * NEWS: Document inlined function support.
4003 * Makefile.in (SFILES): Add inline-frame.c.
4004 (COMMON_OBS): Add inline-frame.o.
4005 * block.c (contained_in): Rewrite to use lexical nesting.
4006 (block_linkage_function): Skip inlined function blocks.
4007 (block_inlined_p): New.
4008 * block.h (struct block): Update comment.
4009 (block_inlined_p): New prototype.
4010 * blockframe.c (get_frame_block): Handle inlined functions.
4011 (get_frame_function): Do not use block_linkage_function.
4012 (block_innermost_frame): Use get_frame_block and contained_in.
4013 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
4014 Skip over inlined functions. Simplify epilogue check.
4015 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
4017 (set_momentary_breakpoint): Only accept non-inlined frames.
4018 (watch_command_1): Use frame_unwind_caller_pc and
4019 frame_unwind_caller_id instead of get_prev_frame.
4020 (until_break_command): Likewise. Use get_stack_frame_id.
4021 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
4022 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
4023 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
4024 (read_func_scope, new_symbol): Likewise. Handle arguments specially
4025 for inlined functions without call site information.
4026 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
4027 (die_specification): Treat DW_AT_abstract_origin as a specification.
4028 (read_type_die): Handle DW_TAG_inlined_subroutine.
4029 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
4030 * frame.c (fprint_frame_id): Print inline depth.
4031 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
4032 (skip_inlined_frames, get_stack_frame_id): New.
4033 (frame_unwind_caller_id): Use skip_inlined_frames.
4034 (frame_id_inlined_p): New.
4035 (frame_id_eq): Make the logic match the comments. Add inline_depth
4037 (frame_id_inner): Handle inlined functions.
4038 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
4039 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
4040 (get_prev_frame_1): Check for inline frames. Split out frame
4041 allocation to get_prev_frame_raw.
4042 (get_prev_frame_raw): New function.
4043 (get_prev_frame): Handle inline frames.
4044 (get_frame_pc): Use frame_unwind_pc.
4045 (get_frame_address_in_block): Skip inlined frames on both sides.
4046 (pc_notcurrent): Delete.
4047 (find_frame_sal): Rewrite to handle inline call sites. Use
4048 get_frame_address_in_block.
4049 (deprecated_update_frame_pc_hack): Make static.
4050 * frame.h: Update comments.
4051 (struct frame_id): Add inline_depth.
4052 (enum frame_type): Add INLINE_FRAME.
4053 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
4054 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
4055 * infcmd.c (set_step_frame): New function.
4056 (step_once): Use set_step_frame. Handle inlined functions.
4057 (until_next_command): Use set_step_frame.
4058 (finish_backward), finish_forward): Use get_stack_frame_id.
4059 (finish_command): Support inlined functions.
4060 * inferior.h (set_step_info): New prototype.
4061 * infrun.c (RESUME_ALL): Use minus_one_ptid.
4062 (clear_proceed_status): Clear step_stack_frame_id.
4063 (init_wait_for_inferior): Call clear_inline_frame_state.
4064 (init_execution_control_state): Make static.
4065 (set_step_info): New function.
4066 (init_thread_stepping_state): Do not set the symtab or line here.
4067 (stepped_in_from): New function.
4068 (handle_inferior_event): Handle inlined functions. Use set_step_info.
4069 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
4070 (struct inferior_status): Add step_stack_frame_id.
4071 (save_inferior_status, restore_inferior_status): Save and restore
4072 step_stack_frame_id.
4073 * inline-frame.c, inline-frame.h: New files.
4074 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
4075 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
4076 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
4077 * stack.c (frame_show_address): New.
4078 (print_frame_info, print_frame): Use it.
4079 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
4080 (frame_info): Mark inlined functions.
4081 (backtrace_command_1): Use get_current_user_frame.
4082 (print_frame_local_vars, print_frame_label_vars): Update comments.
4083 (return_command): Refuse inlined functions.
4084 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
4086 (find_function_start_sal): Avoid inlined functions.
4087 (completion_list_add_fields): New function.
4088 (default_make_symbol_completion_list): Use it. Use block_static_block
4089 and block_global_block. Check for inlined functions.
4090 (skip_prologue_using_sal): Avoid line number comparison across
4092 * symtab.h (struct symbol): Add is_inlined.
4093 (SYMBOL_INLINED): New.
4094 * target.c (target_resume): Call clear_inline_frame_state.
4095 * valops.c (value_of_variable): Check block_inlined_p.
4097 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4099 * frame.c (frame_unwind_id): Renamed to ...
4100 (frame_unwind_caller_id): ... this. All callers updated.
4101 (frame_pc_unwind): Renamed to ...
4102 (frame_unwind_caller_pc): ... this. All callers updated.
4103 * frame.h: Document frame_unwind_caller_WHAT functions.
4104 (frame_unwind_id): Renamed to ...
4105 (frame_unwind_caller_id): ... this.
4106 (frame_pc_unwind): Renamed to ...
4107 (frame_unwind_caller_pc): ... this.
4108 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
4109 * stack.c (parse_frame_specification_1): Do not rely on
4112 2009-06-27 Michael Snyder <msnyder@vmware.com>
4114 * infrun.c (handle_inferior_event): Improve handling of
4115 reverse-stepping into and over shared library functions.
4117 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
4119 * linespec.c (find_method): Add new not_found_ptr parameter to
4120 bring in line with symtab_from_filename, decode_variable.
4121 (decode_compound): Likewise. Also propagate not_found_ptr to
4123 (decode_line_1): Propagate not_found_ptr to decode_compound.
4124 (cplusplus_error): Now throws NOT_FOUND_ERROR.
4126 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
4128 * MAINTAINERS (Write After Approval): Add self.
4130 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4132 * valops.c (value_one): Reimplement broken decimal-float case.
4134 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4136 * eval.c (evaluate_subexp_standard): Use expression architecture
4137 instead of current_gdbarch.
4139 * infrun.c (handle_inferior_event): Avoid unncessary reference
4140 to current_gdbarch and get_current_frame ().
4142 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4144 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
4145 (enum bptype): Add bp_longjmp_master.
4147 * breakpoint.c (create_longjmp_master_breakpoint): New function.
4148 (update_breakpoints_after_exec): Handle bp_longjmp_master
4149 breakpoints. Call create_longjmp_master_breakpoint.
4150 (print_it_typical, bpstat_stop_status, bpstat_what,
4151 print_one_breakpoint_location, allocate_bp_location, mention,
4152 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
4153 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
4154 (create_longjmp_breakpoint): Delete.
4155 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
4156 to install momentary clones of bp_longjmp_master breakpoints.
4158 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
4160 2009-06-23 Cary Coutant <ccoutant@google.com>
4162 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
4163 Set basic_block to 0 after a special opcode.
4165 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
4167 Fix a regression by the mmap patch from 2009-06-16.
4168 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
4169 calls before deleting the OBJFILE obstack. Extend the comment.
4171 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4173 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
4174 (get_java_object_header_size): Add GDBARCH parameter.
4175 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
4176 Use it instead of current_gdbarch.
4177 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
4178 get_java_object_header_size.
4179 * jv-valprint.c (java_value_print): Likewise.
4181 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
4183 * dwarf2read.c (process_die): Handle import statements
4184 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
4185 (read_import_statement): New.
4186 (read_func_scope): Update using_directives to point to current context
4187 (read_lexical_block_scope): Ditto.
4188 * cp-support.h: Added prototype for cp_add_using.
4189 * cp-namespace.c: Removed local context_stack.
4190 (cp_initialize_namespace): Deleted.
4191 (cp_finalize_namespace): Deleted.
4192 (cp_add_using_directive): Use using_directives instead of using_list.
4193 (cp_add_using): No longer static.
4194 * buildsym.h: Created global using_direct variable.
4195 Created using_direct variable in context_stack.
4196 * buildsym.c (finish_block): Set using directives for the block under
4198 (start_symtab): Removed call to cp_initialize_namespace().
4199 (end_symtab): Removed call to cp_finalize_namespace().
4200 (push_context): Save and reset using_directives.
4201 * block.c (block_using): Return using directives for given
4202 block instead of static block.
4204 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4206 * target-descriptions.h (struct type): Do not declare.
4207 (struct tdesc_type): Declare.
4208 (tdesc_named_type): Change return type to struct tdesc_type *.
4209 (tdesc_record_type): Remove.
4210 (tdesc_create_vector): Add prototype.
4211 (tdesc_create_union): Likewise.
4212 (tdesc_add_field): Likewise.
4214 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
4215 member by tdesc_type member.
4216 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
4217 (struct tdesc_type, tdesc_type_p): Likewise.
4218 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
4219 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
4220 (struct tdesc_arch_data): Replace registers member by arch_regs.
4222 (tdesc_predefined_types): Change to array of pre-defined
4223 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
4224 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
4225 (tdesc_gdb_type): New function.
4227 (target_find_description): Update for data structure changes.
4228 (tdesc_data_cleanup): Likewise.
4229 (tdesc_numbered_register): Likewise.
4230 (tdesc_use_registers): Likewise.
4231 (tdesc_create_reg): Likewise.
4233 (tdesc_find_arch_register): New function.
4234 (tdesc_find_register): Use it.
4235 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
4236 tdesc_type on demand; cache generated types in tdesc_arch_reg.
4238 (tdesc_free_type): New function.
4239 (tdesc_free_feature): Call it.
4241 (tdesc_create_vector): New function.
4242 (tdesc_create_union): Likewise.
4243 (tdesc_add_field): Likewise.
4244 (tdesc_record_type): Remove.
4246 (tdesc_type_id): Remove.
4247 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
4248 generated code to create tdesc_type structures instead of GDB types.
4250 * xml-tdesc.c: Do not include "gdbtypes.h".
4251 (struct tdesc_parsing_data): Change type of current_union to
4252 struct tdesc_type *.
4253 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
4254 (tdesc_start_union): Call tdesc_create_union.
4255 (tdesc_start_field): Call tdesc_add_field.
4256 (tdesc_start_vector): Call tdesc_create_vector.
4257 (tdesc_end_union): Remove.
4258 (feature_children): Remove reference to tdesc_end_union.
4260 * features/arm-with-iwmmxt.c: Regenerate.
4261 * features/mips-linux.c: Regenerate.
4262 * features/mips64-linux.c: Regenerate.
4263 * features/rs6000/powerpc-32.c: Regenerate.
4264 * features/rs6000/powerpc-32l.c: Regenerate.
4265 * features/rs6000/powerpc-403.c: Regenerate.
4266 * features/rs6000/powerpc-403gc.c: Regenerate.
4267 * features/rs6000/powerpc-505.c: Regenerate.
4268 * features/rs6000/powerpc-601.c: Regenerate.
4269 * features/rs6000/powerpc-602.c: Regenerate.
4270 * features/rs6000/powerpc-603.c: Regenerate.
4271 * features/rs6000/powerpc-604.c: Regenerate.
4272 * features/rs6000/powerpc-64.c: Regenerate.
4273 * features/rs6000/powerpc-64l.c: Regenerate.
4274 * features/rs6000/powerpc-7400.c: Regenerate.
4275 * features/rs6000/powerpc-750.c: Regenerate.
4276 * features/rs6000/powerpc-860.c: Regenerate.
4277 * features/rs6000/powerpc-altivec32.c: Regenerate.
4278 * features/rs6000/powerpc-altivec32l.c: Regenerate.
4279 * features/rs6000/powerpc-altivec64.c: Regenerate.
4280 * features/rs6000/powerpc-altivec64l.c: Regenerate.
4281 * features/rs6000/powerpc-e500.c: Regenerate.
4282 * features/rs6000/powerpc-e500l.c: Regenerate.
4283 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
4284 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
4285 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
4286 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
4287 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
4288 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
4289 * features/rs6000/powerpc-vsx32.c: Regenerate.
4290 * features/rs6000/powerpc-vsx32l.c: Regenerate.
4291 * features/rs6000/powerpc-vsx64.c: Regenerate.
4292 * features/rs6000/powerpc-vsx64l.c: Regenerate.
4293 * features/rs6000/rs6000.c: Regenerate.
4295 2009-06-23 Joel Brobecker <brobecker@adacore.com>
4297 * ada-lang.c (decode_packed_array): If the value is a pointer to
4298 an array, then use value_ind to dereference it, not ada_value_ind.
4299 (ada_template_to_fixed_record_type_1): Handle the case where a
4300 dynamic field is an aligner type.
4301 (to_fixed_array_type): Add handling for packed array types.
4302 (ada_get_base_type): Do not follow the XVS type if the type is
4304 (ada_evaluate_subexp): Split a few statements up for clarity
4306 <OP_FUNCALL>: Add handling of the case of a packed array that
4307 has already been fixed.
4309 2009-06-23 Joel Brobecker <brobecker@adacore.com>
4311 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
4312 (evaluate_subexp_type): Reimplement using evaluate_subexp.
4313 * value.h (evaluate_subexp): Add declaration.
4314 * eval.c (evaluate_subexp): Make non-static.
4315 * objc-lang.c (print_object_command): Use evaluate_subexp.
4317 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
4319 Revert 2009-05-14 breakpoint commit (no longer needed).
4320 * breakpoint.h (breakpoint_re_set_objfile): Remove
4321 * breakpoint.c (breakpoint_re_set_objfile): Likewise
4322 (create_overlay_event_breakpoint): Remove objfile parameter,
4323 iterate over all objfiles.
4324 * objfiles.c (objfile_relocate): Update.
4325 * symfile.c (new_symfile_objfile): Likewise.
4327 2009-06-23 Tom Tromey <tromey@redhat.com>
4330 * c-lang.c (classify_type): Iterate over typedefs.
4331 * c-valprint.c (textual_element_type): Iterate over typedefs.
4333 2009-06-22 Tristan Gingold <gingold@adacore.com>
4335 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
4338 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4341 * buildsym.c (block_compar): New function.
4342 (end_symtab): Replace the bubble sort by a qsort based code.
4344 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
4346 * MAINTAINERS (Write After Approval): Add self.
4348 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
4350 * spu-tdep.c (spu_get_longjmp_target): New function.
4351 (spu_gdbarch_init): Install it.
4353 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
4356 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
4358 2009-06-21 Michael Snyder <msnyder@vmware.com>
4360 * inferior.h: Update ancient comment.
4362 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
4363 Pedro Alves <pedro@codesourcery.com>
4365 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
4367 (scan_dyntag): Skip if input bfd isn't elf flavoured.
4368 (locate_base): Call elf_locate_base even without an exec_bfd.
4370 2009-06-19 Samuel Bronson <naesten@gmail.com>
4373 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
4374 for prefix commands to avoid duplicates in the output.
4376 2009-06-19 Samuel Bronson <naesten@gmail.com>
4379 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
4382 2009-06-19 Jerome Guitton <guitton@adacore.com>
4384 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
4385 skip prologue on each sals.
4386 (skip_prologue_sal): Return explicit_line and explicit_pc
4389 2009-06-19 Tristan Gingold <gingold@adacore.com>
4391 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
4394 2009-06-19 Tristan Gingold <gingold@adacore.com>
4395 * machoread.c (macho_symtab_read): Adjust for bfd changes.
4396 * darwin-nat.h (struct darwin_exception_msg): New type to describe
4398 (struct private_thread_info): New type to describe the state of the
4400 (DEF_VEC_I thread_t): Removed, replaced by ...
4401 (DEF_VEC_O darwin_thread_t): ... this new type.
4402 (struct darwin_inferior): Renamed to ...
4403 (struct private_inferior): ... this type. Fields added.
4404 (darwin_not_port): Moved into the private inferior structure.
4405 * darwin-nat.c: Add includes, improve comments.
4406 Rewrite to handle multiple threads and processes.
4407 (darwin_resume_to): New function and protype.
4408 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
4409 (darwin_kill_inferior): Add ops argument.
4410 (darwin_pid_to_str): New function.
4411 (darwin_thread_alive): Ditto.
4412 (darwin_inf, darwin_not_port): Removed.
4413 (darwin_inf_fake_stop): New variable.
4414 (msgin, msgout, msg_state, exc_msg): Removed.
4415 (mach_check_error): Use warning instead of error.
4416 (darwin_ptrace): Adjust debug level.
4417 (cmp_thread_t): Fix names (typo).
4418 (darwin_check_new_threads): Argument is now an inferior,
4419 adjust for new structures, add no change check, ignore dead ports,
4420 handle first thread case.
4421 (find_inferior_task_it): New function.
4422 (find_inferior_notify_it): Ditto.
4423 (darwin_find_inferior_by_task): Ditto.
4424 (darwin_find_inferior_by_notify): Ditto.
4425 (darwin_find_thread): Ditto.
4426 (darwin_suspend_inferior): Ditto.
4427 (darwin_resume_inferior): Ditto.
4428 (catch_exception_raise_state): Removed.
4429 (catch_exception_raise_state_identity): Removed.
4430 (darwin_suspend_inferior_it): New function.
4431 (darwin_resume_inferior_it): Ditto.
4432 (darwin_dump_message): New function, extracted from darwin_wait.
4433 (darwin_decode_exception_message): New function.
4434 (darwin_encode_reply): New function.
4435 (catch_exception_raise): Removed.
4436 (darwin_send_reply): New function, extracted from darwin_resume.
4437 (darwin_resume_thread): New function, extracted from darwin_resume.
4438 (struct resume_inferior_threads_param): New type.
4439 (darwin_resume_inferior_threads_it): New function.
4440 (darwin_resume_inferior_threads): New function.
4441 (darwin_suspend_inferior_threads): New function.
4442 (darwin_resume): Mostly rewritten to handle multiple threads and
4444 (darwin_decode_message): New function extracted from darwin_wait.
4445 (cancel_breakpoint): New function.
4446 (darwin_wait): Mostly rewritten. Handle multiple threads.
4447 (darwin_mourn_inferior): Adjust for per process structures.
4448 (darwin_reply_to_all_pending_messages): New function.
4449 (darwin_stop_inferior): Adjust for per inferior structures.
4450 (darwin_attach_pid): Ditto.
4451 (darwin_init_thread_list): Ditto.
4452 (darwin_attach): Ditto.
4453 (darwin_detach): Ditto.
4454 (darwin_files_info): Now empty.
4455 (darwin_pid_to_str): Adjust returns string to match one expected by
4457 (darwin_read_write_inferior): Rename err variable to match other uses.
4458 Adjust debug message. Handle submaps.
4459 (darwin_xfer_memory): Adjust for per inferior structures.
4460 (set_enable_mach_exceptions): Ditto.
4461 (darwin_pid_to_exec_file): New function.
4462 (darwin_get_ada_task_ptid): Ditto.
4463 (darwin_supports_multi_process): Ditto.
4464 (_initialize_darwin_inferior): Remove useless assertion, adjust for
4465 per inferior structures. Add new target operations.
4467 2009-06-18 Hui Zhu <teawater@gmail.com>
4468 Michael Snyder <msnyder@vmware.com>
4470 * infrun.c (handle_inferior_event): Improve reverse stepping
4471 through function epilogue.
4473 * infrun.c (handle_inferior_event): Reverse-next through
4476 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
4478 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
4481 2009-06-17 Tom Tromey <tromey@redhat.com>
4483 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
4485 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4487 * gdbarch.sh (pointer_to_address): Change to type 'm'.
4488 (address_to_pointer): Likewise.
4489 * gdbarch.c, gdbarch.h: Regenerate.
4491 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
4492 (signed_pointer_to_address): Likewise.
4493 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
4494 * findvar.c (unsigned_pointer_to_address): Likewise.
4495 (signed_pointer_to_address): Likewise.
4496 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
4498 * avr-tdep.c (avr_address_to_pointer): Likewise.
4499 (avr_pointer_to_address): Likewise.
4500 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
4501 (iq2000_address_to_pointer): Likewise.
4502 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
4503 (m32c_m16c_pointer_to_address): Likewise.
4504 * spu-tdep.c (spu_pointer_to_address): Likewise.
4505 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
4506 (xstormy16_address_to_pointer): Likewise.
4508 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4510 * printcmd.c (print_scalar_formatted): Always truncate
4511 unsigned data types.
4513 * cli-dump.c (struct callback_data): Change type of load_offset
4515 (restore_binary_file): Update type casts.
4516 (restore_command): Parse load_offset as address, not long.
4518 * utils.c (string_to_core_addr): Do not sign-extend value.
4519 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
4520 before comparing against requested frame address.
4522 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4524 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
4525 * gdbarch.h, gdbarch.c: Regenerate.
4527 * gcore.c (default_gcore_target): Make return value const.
4528 Call gdbarch_gcore_bfd_target if present.
4529 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
4531 * corelow.c (core_read_description): Call gdbarch_core_read_description
4532 on core_gdbarch instead of current_gdbarch.
4534 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
4536 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4538 * gdbtypes.c (create_string_type): Receive character type as argument.
4539 * gdbtypes.h (create_string_type): Add character type argument.
4540 * dwarf2read.c (read_tag_string_type): Pass character type to
4543 * value.h (value_string): Add character type argument.
4544 * valops.c (value_string): Add character type argument. Pass it to
4545 create_string_type. Do not allocate space in inferior.
4546 * valarith.c (value_concat): Pass character type to value_string.
4548 * value.h (value_typed_string): Rename to ...
4549 (value_cstring): ... this.
4550 * valops.c (value_typed_string): Rename to ...
4551 (value_cstring): ... this.
4552 * c-lang.c (evaluate_subexp_c): Update.
4554 * python/python-value.c (builtin_type_pychar): New define.
4555 (convert_value_from_python): Call value_cstring instead
4556 of value_from_string.
4557 * value.c (value_from_string): Remove.
4558 * value.h (value_from_string): Remove.
4560 * eval.c (evaluate_subexp_standard): Pass character type to
4561 value_string. Pass expression architecture to value_nsstring
4562 and lookup_child_selector.
4563 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
4564 (lookup_child_selector): Likewise.
4565 (value_nsstring): Likewise.
4566 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
4567 Pass character type to value_string..
4568 (lookup_child_selector): Likewise.
4569 (value_nsstring): Add GDBARCH parameter, use it instead of
4570 objfile architecture. Pass architecture to lookup_objc_class
4571 and lookup_child_selector. Pass character type to value_string.
4572 (end_msglist): Pass architecture to lookup_objc_class.
4573 * objc-exp.y: Pass architecture to lookup_objc_class.
4575 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4577 * gdbtypes.h (struct language_defn): Add forward declaration.
4578 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
4579 (lookup_unsigned_typename): Likewise.
4580 (lookup_signed_typename): Likewise.
4581 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
4582 Use them instead of current_language and current_gdbarch.
4583 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
4584 Pass them to lookup_typename.
4585 (lookup_signed_typename): Likewise.
4587 * c-exp.y: Pass parse_language and parse_gdbarch to
4588 lookup_unsigned_typename and lookup_signed_typename.
4589 * objc-exp.y: Likewise.
4590 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
4592 * c-lang.c (evaluate_subexp_c): Pass expression language and
4593 gdbarch to lookup_typename.
4594 * printcmd.c (printf_command): Pass current language and
4595 gdbarch to lookup_typename.
4596 * python/python-type.c (typy_lookup_typename): Likewise.
4597 Include "language.h".
4599 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4601 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
4602 Use it instead of current_gdbarch. Pass architecture to
4603 sparc32_gregset_supplies_p.
4604 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
4605 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
4606 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
4607 sparc64nbsd_fpregset_supplies_p): Likewise.
4608 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
4609 Add GDBARCH parameter.
4610 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
4611 (sparc_fetch_inferior_registers): Pass regcache architecture to
4612 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
4613 (sparc_store_inferior_registers): Likewise.
4614 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
4615 Add GDBARCH parameter.
4616 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
4618 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4620 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
4622 * aix-thread.c (pd_enable): Likewise.
4623 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
4624 * bsd-uthread.c (bsd_uthread_activate): Likewise.
4625 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
4626 * linux-thread-db.c (enable_thread_event): Likewise.
4627 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
4628 * nto-procfs.c (procfs_open): Likewise.
4629 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
4630 info_proc_mappings, info_mappings_callback): Likewise.
4631 * record.c (record_open): Likewise.
4632 * rs6000-nat.c (ARCH64): Likewise.
4633 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
4634 (darwin_bfd_open): Likewise.
4635 * memattr.c (mem_info_command): Likewise.
4637 * windows-nat.c (win32_resume): Use current regcache architecture
4638 instead of current_gdbarch.
4640 * dbug-rom.c (dbug_regname): Remove check against number of
4641 registers in current_gdbarch.
4642 * solib-pa64.c (read_dynamic_info): Remove unused variable.
4644 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4646 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
4647 use it instead of current_gdbarch.
4648 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
4649 * arm-tdep.c (arm_skip_prologue): Pass architecture to
4650 deprecated_pc_in_call_dummy.
4652 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
4653 Use it instead of current_gdbarch.
4654 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
4655 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
4656 skip_prologue_using_sal.
4657 * arm-tdep.c (skip_prologue_using_sal): Likewise.
4658 * lm32-tdep.c (lm32_skip_prologue): Likewise.
4659 * m32-tdep.c (m32c_skip_prologue): Likewise.
4660 * mips-tdep.c (mips_skip_prologue): Likewise.
4661 * moxie-tdep.c (moxie_skip_prologue): Likewise.
4662 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
4663 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
4664 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
4665 it to skip_prologue_using_sal. Update call sites ...
4666 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
4668 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
4669 (check_for_saved): Use it instead of current_gdbarch.
4670 (mn10300_analyze_prologue): Set it.
4672 * value.c (using_struct_return): Add GDBARCH parameter. Use it
4673 instead of current_gdbarch.
4674 * value.h (using_struct_return): Add GDBARCH parameter.
4675 * eval.c (evaluate_subexp_standard): Pass architecture to
4676 using_struct_return.
4677 * infcall.c (call_function_by_hand): Likewise.
4678 * stack.c (return_command): Likewise.
4679 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
4681 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
4683 * symtab.h (in_prologue): Add GDBARCH parameter.
4684 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
4686 * eval.c (evaluate_subexp_standard): Use expression architecture
4687 instead of current_gdbarch.
4689 * c-lang.c (evaluate_subexp_c): Use expression architecture and
4690 language instead of current_gdbarch and current_language.
4692 * printcmd.c (do_one_display): Use expression architecture instead
4695 * infcmd.c (print_return_value): Use architecture of stop_regcache
4696 instead of current_gdbarch.
4697 (print_vector_info, print_float_info): Remove GDBARCH argument,
4698 use frame architecture instead.
4699 (vector_info, float_info): Update calls.
4701 * objc-lang.c (objc_skip_trampoline): Use frame architecture
4702 instead of current_gdbarch.
4704 * parse.c (write_dollar_variable): Use parse architecture instead
4707 * source.c (line_info): Use objfile architecture instead of
4710 * symtab.c (find_function_start_sal): Use gdbarch instead of
4712 (print_msymbol_info): Use objfile architecture instead of
4715 * valops.c (value_assign): Use frame architecture instead of
4718 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4720 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
4722 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
4723 calling record_line.
4724 (enter_linenos): Likewise.
4725 * dbxread.c (process_one_symbol): Likewise.
4726 * dwarf2read.c (dwarf_decode_lines): Likewise.
4727 * mdebugread.c (psymtab_to_symtab_1): Likewise.
4728 * xcoffread.c (enter_line_range): Likewise.
4730 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4732 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
4733 architecture instead of current_gdbarch.
4734 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
4735 (gen_expr): Pass expression to get_struct_ref.
4737 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
4738 tracepoint_var_ref callback.
4739 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
4740 symbol operation callback.
4741 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
4742 Use it instead of current_gdbarch.
4743 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
4744 dwarf2_tracepoint_var_ref.
4745 (loclist_tracepoint_var_ref): Likewise.
4747 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4749 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
4750 Use it instead of address bits of current_gdbarch.
4751 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
4752 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
4754 (arm_scan_prologue): Likewise.
4755 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
4756 * mep-tdep.c (mep_analyze_prologue): Likewise.
4757 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
4758 * s390-tdep.c (s390_analyze_prologue): Likewise.
4760 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4762 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
4763 frame architecture instead of current_gdbarch.
4764 (mi_cmd_data_list_changed_registers): Likewise.
4765 (mi_cmd_data_list_register_values): Likewise. Pass selected
4766 frame to get_register.
4767 (get_register): Add FRAME argument, use it as frame to retrieve
4768 registers from (instead of selected frame). Use frame architecture
4769 instead of current_gdbarch.
4770 (mi_cmd_data_write_register_values): Use current regcache
4771 architecture instead of current_gdbarch.
4773 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4775 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
4776 use frame architecture instead. Replace current_gdbarch uses.
4777 (tui_show_registers): Update call.
4778 (tui_get_register): Remove GDBARCH parameter; use frame architecture
4780 (tui_show_register_group): Update call.
4781 (tui_check_register_values): Likewise.
4782 (tui_register_format): Remove GDBARCH parameter; use frame
4783 architecture instead. Replace current_gdbarch uses.
4784 (tui_get_register): Update call.
4786 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4788 * gdbarch.sh (construct_inferior_arguments): Remove.
4789 * gdbarch.c, gdbarch.h: Regenerate.
4790 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
4791 directly instead of gdbarch_construct_inferior_arguments.
4792 (construct_inferior_arguments): Remove GDBARCH argument.
4793 * inferior.h (construct_inferior_arguments): Likewise.
4795 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4797 * symfile.c (section_is_mapped): Use objfile architecture instead
4799 (TARGET_LONG_BYTES): Remove.
4800 (read_target_long_array): Add SIZE argument. Use it instead of
4802 (simple_read_overlay_table): Retrieve long size from objfile
4803 architecture; pass it to read_target_long_array.
4804 (simple_read_overlay_region_table): Likewise.
4805 (simple_overlay_update_1): Likewise.
4807 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4809 * infrun.c (cleanup_displaced_step_closure): Remove.
4810 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
4811 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
4812 of cleanup_displaced_step_closure.
4813 (handle_inferior_event, keep_going): Use thread architecture instead
4816 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4818 * infrun.c (handle_inferior_event): Use current frame architecture
4819 or thread architecture instead of current_gdbarch. Pass to
4820 handle_step_into_function and handle_step_into_function_backward.
4821 (handle_step_into_function): Add GDBARCH parameter. Use it instead
4823 (handle_step_into_function_backward): Likewise.
4824 (insert_step_resume_breakpoint_at_frame): Use frame architecture
4825 instead of current_gdbarch.
4826 (insert_step_resume_breakpoint_at_caller): Likewise.
4828 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
4829 Pedro Alves <pedro@codesourcery.com>
4831 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
4832 is pushed for watchpoint promotion to hardware watchpoint.
4834 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
4836 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
4837 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
4838 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
4839 (dwarf_ranges_section, dwarf_frame_section)
4840 (dwarf_eh_frame_section): Removed.
4841 (dwarf2_resize_section): Likewise.
4842 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
4843 (dwarf2_get_section_info): New function.
4844 (munmap_section_buffer): Likewise.
4845 (dwarf2_per_objfile_cleanup): Likewise.
4846 (section_is_p): Signature change.
4847 * dwarf2-frame.c (dwarf2_build_frame_info): Use
4848 dwarf2_get_section_info instead of dwarf2_read_section.
4850 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
4852 * solib.c (symbol_add_stub): New FLAGS parameter.
4853 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
4855 (solib_add): Defer breakpoint_re_set until after all solibs.
4856 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
4857 * rs6000-nat.c (objfile_symbol_add): Adjust.
4858 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
4859 (new_symfile_objfile): Likewise.
4860 (symbol_file_add_with_addrs_or_offsets): Likewise.
4861 (symbol_file_add_from_bfd): Likewise.
4862 (symbol_file_add): Likewise.
4863 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
4864 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
4865 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
4866 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
4868 2009-06-16 Keith Seitz <keiths@redhat.com>
4870 * linespec.c (collect_methods): Delete.
4871 (add_matching_methods): Reove destructor special case.
4872 (find_method): Call find_methods directly instead of
4874 * valops.c (value_struct_elt): Remove destructor
4876 (check_field): Likewise.
4877 (value_struct_elt_for_reference): Likewise.
4878 (destructor_name_p): Remove misleading comment about dtors
4879 being "special cases".
4880 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
4881 * gdbtypes.c (get_destructor_fn_field): Likewise.
4883 2009-06-16 Pedro Alves <pedro@codesourcery.com>
4885 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
4886 TARGET_OJECT_MEMORY reads to the topmost target, not to the
4887 flattened current_target.
4889 2009-06-16 Tristan Gingold <gingold@adacore.com>
4891 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
4893 (avr_register_name): Add const to register_names.
4894 (avr_scan_arg_moves): Move inside avr_scan_prologue.
4895 (avr_scan_prologue): Add pc_end argument.
4896 Only read prologue bytes that can be read.
4897 Limit the scan to the known prologue length.
4898 Makes pattern variables static and const.
4900 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
4902 (avr_breakpoint_from_pc): Constify avr_break_insn.
4903 (avr_extract_return_value): Fix function comment.
4904 (avr_frame_unwind_cache): Fix GNU style violations.
4905 Pass current_pc argument to avr_scan_prologue to stop prologue
4906 analysis to the current pc. This fixes the bug with the 'next'
4908 Correctly set the SP register of the previous frame (use call_length).
4909 (avr_frame_prev_register): Fix indentation.
4910 Correctly read PC from the stack on avr6 architectures.
4911 (avr_push_dummy_call): Fix indentation.
4912 (avr_gdbarch_init): Set call_length according to the architecture.
4914 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
4916 * infcall.c (show_unwind_on_terminating_exception_p): New
4918 (call_function_by_hand): Create breakpoint and clean-up call for
4919 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
4920 gate. Pop frame on breakpoint hit.
4921 (_initialize_infcall): Add add_setshow_boolean_cmd for
4922 unwind-on-terminating-exception.
4924 2009-06-12 Kevin Buettner <kevinb@redhat.com>
4926 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
4927 `has_section_at_zero' flag from stripped objfile to separate,
4928 debug info only, objfile.
4930 2009-06-12 Pedro Alves <pedro@codesourcery.com>
4932 * exec.h (section_table_xfer_memory_partial): Improve description,
4933 mention SECTION_NAME.
4934 * exec.c (section_table_xfer_memory_partial): Remove stale
4937 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4939 * nto-tdep.h (nto_generic_supply_gpregset)
4940 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
4941 * nto-tdep.c (nto_generic_supply_gpregset)
4942 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
4944 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4946 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
4947 (i386nto_sigcontext_addr): Change the way context address is calculated.
4948 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
4949 sc_sp_offset and set sc_reg_offset and sc_num_regs.
4951 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4953 * i386-nto-tdep.c (i386_nto_target): Remove definition.
4954 (init_i386nto_ops): Use macros to set fields to global
4955 current_nto_target directly.
4956 (i386nto_init_abi): Remove unused nto_set_target call.
4957 * nto-tdep.h (nto_set_target): Remove unused declaration.
4958 * nto-tdep.c (nto_set_target): Remove unused function.
4960 2009-06-11 Pedro Alves <pedro@codesourcery.com>
4962 * breakpoint.c (break_command_really): Rename local variable
4963 breakpoint_chain to bkpt_chain.
4965 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4967 Add support for XMM registers.
4968 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
4969 (i386nto_register_area): Correctly calculate offsets and sizes for
4970 all supported registers.
4972 2009-06-11 Tom Tromey <tromey@redhat.com>
4974 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
4975 'static' from local variable definitions.
4977 2009-06-11 Pedro Alves <pedro@codesourcery.com>
4979 * symtab.c (append_expanded_sal): Remove unused local variables.
4981 2009-06-11 Pedro Alves <pedro@codesourcery.com>
4983 * infrun.c (sched_multi): New global.
4984 (resume): If sched_multi is set, resume only threads of the
4986 (prepare_to_proceed): Don't switch over to wait_ptid if we're
4987 resuming a different inferior, and sched_multi is off.
4988 (show_schedule_multiple): New.
4989 (_initialize_infrun): Register new "set schedule-multiple" command.
4990 * inferior.h (sched_multi): Declare.
4991 * NEWS: Mention new "schedule-multiple" setting.
4993 2009-06-11 Pedro Alves <pedro@codesourcery.com>
4995 * varobj.c (varobj_create): Properly restore the selected frame.
4997 2009-06-05 Tom Tromey <tromey@redhat.com>
4999 * inferior.c (print_inferior): Make a table, not a list. Emit
5002 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
5004 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
5005 darwin_wait (blocking wait).
5006 (darwin_kill_inferior): Likewise.
5008 2009-06-10 Pedro Alves <pedro@codesourcery.com>
5010 * infrun.c (handle_inferior_event): Update comment around trying
5011 to revert back to a stepping thread that has exited.
5013 2009-06-10 Cary Coutant <ccoutant@google.com>
5015 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
5016 DW_LNE_set_discriminator.
5018 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
5020 * breakpoint.c: ARI fixes.
5021 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
5022 (print_one_breakpoint_location): Likewise.
5023 (create_longjmp_breakpoint): Likewise.
5024 (tracepoint_save_command): Likewise
5025 (bpstat_find_step_resume_breakpoint): No operator at end of line.
5026 (bpstat_stop_status): Likewise.
5027 (describe_other_breakpoints): Likewise.
5028 (hw_watchpoint_used_count): Likewise.
5029 (expand_line_sal_maybe): Likewise.
5030 (break_command_really): Likewise.
5031 (delete_command): Likewise.
5032 (do_enable_breakpoint): Likewise.
5033 (delete_trace_command): Likewise.
5034 (catch_exception_command_1): Likewise and remove extra parentheses.
5036 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5038 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
5039 "ubreak" command that does not exist.
5041 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5043 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
5045 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5047 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
5049 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5052 * proc-utils.h (procfs_first_available): Don't declare here.
5053 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
5055 * procfs.c: Include procfs.h.
5056 (procfs_target): Make it public. Don't register
5057 procfs_can_use_hw_breakpoint here.
5058 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
5059 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
5060 (procfs_can_use_hw_breakpoint): Remove check of
5061 TARGET_HAS_HARDWARE_WATCHPOINTS.
5062 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
5064 (_initialize_procfs): Don't add the procfs target here.
5066 * i386-sol2-nat.c: Include target.h and procfs.h.
5067 (_initialize_amd64_sol2_nat): Install the procfs target here,
5068 customized with watchpoints support.
5069 * irix5-nat.c: Include target.h.
5070 (_initialize_core_irix5): Rename to ...
5071 (_initialize_irix5_nat): ... this. Install the procfs target
5072 here, customized with watchpoints support.
5073 * alpha-nat.c: Include procfs.h.
5074 (_initialize_core_alpha): Rename to...
5075 (_initialize_alpha_nat): ... this. Install the procfs target
5076 here, customized with watchpoints support.
5077 * sparc-sol2-nat.c: Include target.h and procfs.h.
5078 (_initialize_sparc_sol2_nat): New.
5080 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5081 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5082 * config/mips/irix5.mh (NAT_FILE): Delete.
5083 * config/mips/irix6.mh (NAT_FILE): Delete.
5084 * config/mips/nm-irix5.h: Delete.
5086 20009-06-07 Pedro Alves <pedro@codesourcery.com>
5088 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
5089 to enum target_object. Cleanup comments.
5090 * auxv.h: Include "target.h". Cleanup comments to not mention
5091 NATIVE_XFER_AUXV anymore.
5093 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5095 * inferior.h (procfs_first_available): Move declaration to...
5096 * proc-utils.h: ... here.
5097 * sol-thread.c: Include procfs.h and proc-utils.h.
5099 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5101 * inferior.h (proc_iterate_over_mappings): Delete declaration.
5102 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
5103 * procfs.c (proc_iterate_over_mappings): Delete.
5105 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5107 * target.h (struct target_ops): Make to_has_all_memory,
5108 to_has_memory, to_has_stack, to_has_registers and to_has_execution
5109 methods instead of variables.
5110 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
5111 (target_has_registers_1, target_has_execution_1): Declare
5113 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
5114 (target_has_memory): Rewrite to call target_has_memory_1.
5115 (target_has_stack): Rewrite to call target_has_all_stack_1.
5116 (target_has_registers): Rewrite to call target_has_registers_1.
5117 (target_has_execution): Rewrite to call target_has_execution_1.
5118 (default_child_has_all_memory, default_child_has_memory)
5119 (default_child_has_stack, default_child_has_registers)
5120 (default_child_has_execution): Declare.
5121 (target_mark_running, target_mark_exited): Delete declarations.
5122 * target.c (default_child_has_all_memory,
5123 default_child_has_memory, default_child_has_stack,
5124 default_child_has_registers, default_child_has_execution): New.
5125 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
5126 target_has_registers_1, target_has_execution_1): New.
5127 (add_target): Default the to_has_all_memory, to_has_all_memory,
5128 to_has_memory, to_has_stack, to_has_registers and to_has_execution
5129 callbacks to return 0.
5130 (update_current_target): Do not inherit to_has_all_memory,
5131 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
5132 (target_mark_running, target_mark_exited): Delete.
5133 (memory_xfer_partial): Adjust.
5134 (target_read_memory, target_write_memory, target_search_memory):
5135 Dispatch to the the top-most target, not the flattened
5137 (target_info): Adjust.
5138 (init_dummy_target): Install return_zero as callback for
5139 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
5141 (set_maintenance_target_async_permitted): Use have_live_inferiors
5142 instead of target_has_execution.
5143 * target-memory.c (target_write_memory_blocks): Dispatch memory
5144 writes to the the top-most target, not the flattened
5147 * breakpoint.c (insert_breakpoints): Don't check for
5148 target_has_execution here.
5149 (update_global_location_list): Check if there are live inferiors
5150 to debug instead of target_has_execution.
5151 * infcmd.c (kill_command, detach_command): Check if there are
5152 inferiors instead of target_has_execution.
5153 * inferior.h (have_live_inferiors): Declare.
5154 * inferior.c (have_live_inferiors): New.
5155 * infrun.c (normal_stop): Don't check for target_has_execution to
5156 finish the thread states.
5157 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
5158 (any_running, is_executing): Remove checks for
5159 target_has_execution.
5160 * top.c (kill_or_detach): Don't try to kill core inferiors.
5161 (quit_target): Don't check for target_has_execution.
5163 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
5165 (init_core_ops): Install core_has_memory, core_has_stack and
5167 * exec.c (exec_has_memory): New.
5168 (init_exec_ops): Install exec_has_memory.
5169 * remote.c (remote_add_inferior): Don't call target_mark_running.
5170 (remote_start_remote): Don't call target_mark_exited or call
5171 target_mark_running.
5172 (remote_open_1): Use have_inferiors instead of
5173 target_has_execution. Don't use target_mark_exited.
5174 (init_remote_ops): Install deafult_child_has_all_memory,
5175 default_child_has_memory, default_child_has_stack,
5176 default_child_has_registers, default_child_has_execution.
5177 * bsd-kvm.c (bsd_kvm_return_one): New.
5178 (bsd_kvm_add_target): Register bsd_kvm_return_one as
5179 to_has_memory, to_has_stack and to_has_registers callbacks.
5180 * remote-m32r-sdi.c (m32r_return_one): New.
5181 (init_m32r_ops): Register it.
5182 * inf-child.c (inf_child_target): Adjust to register
5183 default_child_has_all_memory, default_child_has_memory,
5184 default_child_has_stack, default_child_has_registers,
5185 default_child_has_execution callbacks.
5186 * gnu-nat.c (init_gnu_ops): Likewise.
5187 * go32-nat.c (init_go32_ops): Likewise.
5188 * hpux-thread.c (init_hpux_thread_ops): Likewise.
5189 * monitor.c (init_base_monitor_ops): Likewise.
5190 * nto-procfs.c (init_procfs_ops): Likewise.
5191 * remote-mips.c (_initialize_remote_mips): Likewise.
5192 * windows-nat.c (init_windows_ops): Likewise.
5193 * remote-sim.c (gdbsim_create_inferior): Don't use
5194 target_mark_running or target_mark_exited.
5195 (gdbsim_mourn_inferior): Don't call target_mark_exited.
5196 (init_gdbsim_ops): Adjust to register
5197 default_child_has_all_memory, default_child_has_memory,
5198 default_child_has_stack, default_child_has_registers,
5199 default_child_has_execution callbacks.
5201 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
5202 there's no inferior selected, defer to a lower stratum.
5204 2009-06-05 Tom Tromey <tromey@redhat.com>
5206 * varobj.c (update_dynamic_varobj_children): Wrap error text in
5208 (install_visualizer): Likewise.
5209 (varobj_set_visualizer): Likewise.
5211 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
5213 * mi/mi-main.c (mi_cmd_exec_continue)
5214 (mi_cmd_exec_interrupt): Adjust parsing of thread group
5215 ids to current reality, where they don't have any 'p' prefix.
5217 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
5219 * corelow.c (core_open): Check for core_gdbarch before calling
5220 gdbarch_target_signal_from_host.
5222 2009-06-05 Tom Tromey <tromey@redhat.com>
5224 * c-exp.y (parse_number): Don't use K&R definition.
5226 (yyerror): Likewise.
5228 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
5230 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
5232 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
5234 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
5235 * ax-gdb.c (gen_var_ref): Likewise.
5236 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
5237 * printcmd.c (address_info): Likewise.
5238 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
5239 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
5240 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
5241 * dwarf2loc.h: Likewise.
5242 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
5244 * symtab.h: (struct symbol_register_ops): New struct definition.
5245 (struct symbol): Make "ops" member a union of symbol_computed_ops and
5246 symbol_register_ops callback pointers.
5247 (SYMBOL_REGISTER_OPS): New macro.
5248 * tracepoint.c: Include "objfiles.h".
5249 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
5250 callback to retrieve register numbers.
5251 * ax-gdb.c (gen_var_ref): Likewise.
5252 * findvar.c (read_var_value): Likewise.
5253 * printcmd.c (address_info): Likewise.
5255 * coffread.c (coff_reg_to_regnum): New function.
5256 (coff_register_funcs): New static variable.
5257 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
5258 Install SYMBOL_REGISTER_OPS callbacks.
5259 * mdebugread.c (mdebug_reg_to_regnum): New function.
5260 (mdebug_register_funcs): New static variable.
5261 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
5262 Install SYMBOL_REGISTER_OPS callbacks.
5263 * stabsread.c (stab_reg_to_regnum): New function.
5264 (stab_register_funcs): New static variable.
5265 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
5266 Install SYMBOL_REGISTER_OPS callbacks.
5268 2009-06-03 Doug Evans <dje@google.com>
5270 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
5271 after discarding its contents.
5273 2009-06-03 Pedro Alves <pedro@codesourcery.com>
5275 * target.c: Include "exec.h".
5276 (update_current_target): Don't inherit to_sections or
5278 (target_get_section_table): New.
5279 (target_section_by_addr): Fetch the section table from the passed
5281 (memory_xfer_partial): Handle unmapped overlay sections before
5282 anything else. Get the overlay mapped address here. Adjust to
5283 use section_table_xfer_memory_partial.
5284 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
5285 instead of TARGET_OBJECT_MEMORY.
5286 (target_resize_to_sections): Delete.
5287 (remove_target_sections): Adjust to remove target sections from
5288 `current_target_sections', and use resize_section_table.
5289 * target.h (struct target_ops) <to_sections, to_sections_end>:
5291 <to_get_section_table>: New method.
5292 (xfer_memory, print_section_info): Delete declarations.
5293 (struct target_section_table): New type.
5294 (target_get_section_table): Declare.
5295 (target_resize_to_sections): Delete declaration.
5296 (remove_target_sections): Delete declaration.
5297 * bfd-target.c (target_bfd_xfer_partial): Get the section table
5299 (target_bfd_get_section_table): New.
5300 (target_bfd_xclose): Adjust.
5301 (target_bfd_reopen): Store the section table in the to_data field.
5302 * corelow.c (core_data): New.
5303 (core_close): Adjust to release core_data and its sections.
5304 (core_open): Allocate core_data, and build its target sections
5306 (deprecated_core_resize_section_table): New.
5307 (core_files_info): Pass core_data to print_section_info.
5308 (core_xfer_partial): Adjust to use
5309 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
5310 (init_core_ops): Do not install a deprecated_xfer_memory callback
5312 * solib.c (update_solib_list): Add the shared library sections
5313 to the current target sections table.
5314 * exec.c (current_target_sections_1): New global.
5315 (current_target_sections): New global.
5316 (exec_close_1): New function, refactored from exec_close. Remove
5317 the exec_bfd's sections from the current target sections table.
5318 Adjust to not use to_sections.
5319 (exec_close): Remove all target sections. Call exec_close_1.
5320 (exec_file_clear): Use exec_close_1 instead of unpushing the
5322 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
5323 exec_bfd's sections to the current target sections table. Don't
5324 push the exec_ops target here.
5325 (resize_section_table): New.
5326 (add_target_sections): New.
5327 (remove_target_sections): Moved here.
5328 (section_table_xfer_memory): Adjust to implement the xfer_partial
5329 interface, and rename to...
5330 (section_table_xfer_memory_partial): ... this, replacing the
5331 current function of that same name.
5332 (exec_get_section_table): New.
5333 (exec_xfer_partial): New.
5334 (xfer_memory): Delete.
5335 (print_section_info): Replace the target_ops parameter by a
5336 target_section_table parameter.
5337 (exec_files_info, set_section_command, exec_set_section_address):
5338 Adjust to use the current sections table.
5339 (init_exec_ops): Do not register a deprecated_xfer_memory
5340 callback. Register to_xfer_partial and to_get_section_table
5342 * infrun.c (handle_inferior_event): Update comments around
5344 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
5345 deprecated_core_resize_section_table.
5346 * exec.h (resize_section_table): Declare.
5347 (section_table_xfer_memory_partial): Add const char * argument.
5348 (remove_target_sections): Declare here.
5349 (add_target_sections): Declare.
5350 (print_section_info): Declare here.
5351 * gdbcore.h (deprecated_core_resize_section_table): Declare.
5353 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5355 * value.h (struct internalvar): Remove.
5356 (get_internalvar_integer): Add prototype.
5357 (set_internalvar_integer): Add prototype.
5358 (clear_internalvar): Add prototype.
5360 * value.c (struct internalvar): Move here. Add type member. Remove
5361 endian member. Add union_internalvar member instead of value member.
5362 (init_if_undefined_command): Use intvar->type.
5363 (create_internalvar): Do not initialize value/endian, but type.
5364 (create_internalvar_type_lazy): Call create_internalvar.
5365 (value_of_internalvar): Handle host-side internalvar contents.
5366 (set_internalvar_component): Likewise.
5367 (set_internalvar): Likewise.
5368 (get_internalvar_integer): New function.
5369 (clear_internalvar): Likewise.
5370 (set_internalvar_integer): Likewise.
5371 (preserve_values): Handle host-side internalvar contents.
5373 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
5374 set_internalvar_integer instead of set_internalvar.
5375 * findcmd.c (find_command): Likewise.
5376 * infrun.c (handle_inferior_event): Likewise.
5377 * source.c (forward_search_command, reverse_search_command): Likewise.
5378 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
5379 set_traceframe_context): Likewise.
5381 * printcmd.c (x_command): Call clear_internalvar instead of
5383 * tracepoint.c (set_traceframe_context): Likewise.
5385 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
5386 instead of value_of_internalvar.
5387 * linespec.c (decode_dollar): Likewise.
5389 * expprint.c (dump_subexp_body_standard): Use internalvar_name
5390 instead of accessing internalvar private elements.
5391 * valops.c (value_assign): Copy from original source instead of
5392 accessing internalvar private elements.
5394 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5396 * scm-lang.c (builtin_type_scm): Remove.
5397 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
5398 objfile architecture. Use per-architecture builtin_scm_type instead
5399 of builtin_type_scm.
5400 (evaluate_exp): Pass expression architecture to scm_lookup_name.
5402 (scm_get_field): Add SIZE parameter. Use it instead of
5403 TYPE_LENGTH (builtin_type_scm).
5405 (build_scm_types): New function.
5406 (scm_type_data): New variable.
5407 (builtin_scm_type): New function.
5408 (_initialize_scheme_language): Do not initialize builtin_type_scm.
5409 Register build_scm_types as post-init function for scm_type_data.
5411 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
5412 instead of builtin_type_scm.
5414 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
5415 (scm_get_field): Add SIZE paramter.
5416 (scm_scmval_print): Remove prototype.
5417 (builtin_type_scm): Remove.
5418 (struct builtin_scm_type): Add structure definition.
5419 (builtin_scm_type): Add prototype.
5421 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
5422 instead of builtin_core_addr type; do not use objfile architecture.
5423 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
5424 Pass type to scm_scmval_print.
5425 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
5426 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
5427 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
5428 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
5430 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5432 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
5433 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
5434 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
5435 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
5436 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
5437 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
5438 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
5439 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
5440 mdebug_type_complex, mdebug_type_double_complex,
5441 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
5444 (basic_type_data): New global variable.
5445 (basic_type): New function.
5446 (parse_type): Remove static basic type map map_bt. Call basic_type
5447 to get basic types instead of using mdebug_type_ variables.
5449 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
5450 (upgrade_type): Likewise.
5451 (parse_procedure): Likewise.
5452 (psymtab_to_symtab_1): Likewise.
5454 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
5455 Initialize basic_type_data.
5457 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5459 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
5460 * dfp.c (promote_decimal): Remove.
5461 (decimal_binop): Convert LEN_RESULT to input parameter.
5462 Remove call to decimal_binop.
5463 (decimal_compare): Remove call to decimal_binop.
5465 * valarith.c (value_binop): Pass desired result type length
5468 2009-06-01 Tristan Gingold <gingold@adacore.com>
5470 * configure.tgt (avr): Set gdb_sim to use the simulator.
5472 2009-05-29 Doug Evans <dje@google.com>
5474 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
5475 If scheduler-locking is enabled, we're not going to be singlestepping
5476 any other previously stopped thread.
5478 2009-05-29 Pedro Alves <pedro@codesourcery.com>
5480 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
5482 2009-05-29 Eli Zaretskii <eliz@gnu.org>
5484 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
5485 for stabs and COFF debug info.
5487 2009-05-28 Pedro Alves <pedro@codesourcery.com>
5489 * infrun.c (handle_inferior_event): When thread hoping, switch
5490 inferior_ptid to the event thread before removing breakpoints from
5491 the target. If not stopping, also try to revert back to a thread
5492 that was doing a "next". Check if that thread still exists before
5494 (currently_stepping_thread): Delete and merge with ...
5495 (currently_stepping): ... this.
5496 (currently_stepping_callback): Rename to ...
5497 (currently_stepping_or_nexting_callback): ... this, and also
5498 return true if the thread was stepping over a call (has a
5499 step-resume breakpoint).
5501 2009-05-28 Tom Tromey <tromey@redhat.com>
5503 * python/python.c (gdbpy_parameter): Rename. Fix error message.
5504 (GdbMethods): Change "get_parameter" to "parameter".
5506 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
5507 Paul Pluzhnikov <ppluzhnikov@google.com>
5509 * configure.ac (!have_libpython): Add python-prettyprint source
5511 * configure: Regenerate.
5512 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
5515 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
5516 Tom Tromey <tromey@redhat.com>
5517 Thiago Jung Bauermann <bauerman@br.ibm.com>
5519 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
5520 * varobj.h (varobj_set_visualizer): Declare.
5521 (varobj_get_display_hint): Likewise.
5522 (varobj_update_result_t) <children_changed, value_installed>: New
5524 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
5525 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
5526 mi_cmd_var_set_child_range): Declare.
5527 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
5528 (mi_cmd_var_list_children): Emit display hint.
5529 (varobj_update_one): Emit display hint. Handle dynamic children.
5530 * python/python.c (GdbMethods): Add "default_visualizer".
5531 * python/python-internal.h (apply_varobj_pretty_printer,
5532 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
5534 (gdbpy_default_visualizer): Likewise.
5535 * varobj.c: Include python.h, python-internal.h.
5536 (PyObject): New typedef.
5537 (struct varobj) <children_requested, pretty_printer>: New fields.
5538 (varobj_create): Call install_default_visualizer.
5539 (instantiate_pretty_printer): New function.
5540 (varobj_set_display_format): Update.
5541 (varobj_get_display_hint): New function.
5542 (update_dynamic_varobj_children): New function.
5543 (varobj_get_num_children): Handle dynamic children.
5544 (varobj_list_children): Likewise.
5545 (install_new_value): Likewise.
5546 (varobj_add_child): New function.
5547 (install_visualizer): Likewise.
5548 (install_default_visualizer): Likewise.
5549 (varobj_set_visualizer): Likewise.
5550 (varobj_update): Handle dynamic children.
5551 (create_child): Use create_child_with_value.
5552 (create_child_with_value): New function.
5553 (value_get_print_value): Call pretty printer. Add value_formatter
5555 (c_value_of_variable): Update.
5556 (varobj_invalidate): Always free all_rootvarobj.
5557 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
5559 (gdbpy_get_varobj_pretty_printer): Likewise.
5560 (gdbpy_default_visualizer): Likewise.
5562 2009-05-27 Tom Tromey <tromey@redhat.com>
5563 Thiago Jung Bauermann <bauerman@br.ibm.com>
5564 Phil Muldoon <pmuldoon@redhat.com>
5565 Paul Pluzhnikov <ppluzhnikov@google.com>
5566 Vladimir Prus <vladimir@codesourcery.com>
5568 * python/python-value.c (value_object_to_value): New function.
5569 * python/python-internal.h: Include frameobject.h.
5570 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
5572 (value_object_to_value): Declare.
5573 * printcmd.c (struct format_data) <raw>: New field.
5574 (last_format): Default to 0.
5575 (decode_format): Initialize val.raw. Handle /r flag.
5576 (print_command_1): Initialize fmt.raw and opts.raw.
5577 (output_command): Likewise.
5578 (x_command): Fix initialization of fmt.format. Initialize
5580 (display_command): Initialize fmt.raw.
5581 (do_one_display): Set opts.raw.
5582 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
5583 gdbpy_display_hint_cst): New globals.
5584 (_initialize_python): Initialize them. Set gdb.pretty_printers.
5585 * cp-valprint.c: Include python.h.
5586 (cp_print_value): Call apply_val_pretty_printer.
5587 * python/python.h (apply_val_pretty_printer): Declare.
5588 * stack.c (print_this_frame_argument_p): Remove.
5589 (print_frame_args): Compute summary flag. Don't use
5590 print_this_frame_argument_p.
5591 * valprint.c: Include python.h.
5592 (user_print_options): Initialize new fields.
5593 (scalar_type_p): New function.
5594 (val_print): Handle 'raw' and 'summary' modes. Call
5595 apply_val_pretty_printer.
5596 (value_print): Handle 'raw' mode.
5597 * valprint.h (struct value_print_options) <raw, summary>: New
5599 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
5600 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
5601 (python-prettyprint.o): New target.
5602 * python/python-prettyprint.c: New file.
5604 2009-05-27 Tom Tromey <tromey@redhat.com>
5605 Paul Pluzhnikov <ppluzhnikov@google.com>
5607 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
5609 * cli/cli-dump.c (dump_value_to_file): Use value_address.
5610 * valprint.c (common_val_print): Likewise.
5611 * v850-tdep.c (v850_push_dummy_call): Use value_address.
5612 * tracepoint.c (encode_actions): Use value_address.
5613 * printcmd.c (print_formatted): Use value_address.
5614 (x_command): Likewise.
5615 * p-valprint.c (pascal_object_print_static_field): Use
5617 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
5618 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
5619 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
5620 * jv-valprint.c (java_value_print): Use value_address.
5621 * infcall.c (find_function_addr): Use value_address.
5622 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
5623 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
5624 * frv-tdep.c (frv_push_dummy_call): Use value_address.
5625 * frame.c (frame_register_unwind): Use value_address.
5626 (frame_unwind_register_value): Likewise.
5627 * darwin-nat-info.c (info_mach_region_command): Use
5629 * cp-valprint.c (cp_print_static_field): Use value_address.
5630 * c-valprint.c (c_value_print): Use value_address.
5631 * breakpoint.c (update_watchpoint): Use value_address.
5632 (can_use_hardware_watchpoint): Likewise.
5633 * ada-valprint.c (ada_val_print_1): Use value_address.
5634 (ada_value_print): Likewise.
5635 * ada-tasks.c (read_fat_string_value): Use value_address.
5636 * jv-lang.c (java_link_class_type): Use set_value_address.
5637 (java_link_class_type): Likewise.
5638 (get_java_utf8_name): Use value_address.
5639 (type_from_class): Likewise.
5640 (java_link_class_type): Likewise.
5641 * findvar.c (value_of_register): Use set_value_address.
5642 (read_var_value): Likewise.
5643 (read_var_value): Likewise.
5644 * eval.c (evaluate_subexp_standard): Use set_value_address.
5645 (evaluate_subexp_standard): Use value_address.
5646 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
5647 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
5648 (ada_value_primitive_packed_val): Likewise.
5649 (ensure_lval): Likewise.
5650 (thin_data_pntr): Use value_address.
5651 (desc_bounds): Likewise.
5652 (ada_value_primitive_packed_val): Likewise.
5653 (value_assign_to_component): Likewise.
5654 (ensure_lval): Likewise.
5655 (make_array_descriptor): Likewise.
5656 (ada_to_fixed_value): Likewise.
5657 (unwrap_value): Likewise.
5658 * value.c (deprecated_value_address_hack): Remove.
5659 (value_address): New function.
5660 (value_raw_address): Likewise.
5661 (set_value_address): Likewise.
5662 (value_fn_field): Use set_value_address.
5663 (value_from_contents_and_address): Likewise.
5664 (value_fn_field): Likewise.
5665 (allocate_value_lazy): Don't use VALUE_ADDRESS.
5666 (value_as_address): Use value_address.
5667 (value_static_field): Likewise.
5668 * valops.c (search_struct_field): Use set_value_address.
5669 (value_at): Likewise.
5670 (value_at_lazy): Likewise.
5671 (value_repeat): Likewise.
5672 (value_cast_structs): Use value_address.
5673 (value_cast): Likewise.
5674 (value_fetch_lazy): Likewise.
5675 (value_assign): Likewise.
5676 (value_repeat): Likewise.
5677 (address_of_variable): Likewise.
5678 (value_coerce_array): Likewise.
5679 (value_coerce_function): Likewise.
5680 (value_addr): Likewise.
5681 (search_struct_field): Likewise.
5682 (search_struct_method): Likewise.
5683 (find_method_list): Likewise.
5684 (value_struct_elt_for_reference): Likewise.
5685 (value_full_object): Likewise.
5686 * jv-valprint.c (java_value_print): Use set_value_address.
5687 * value.h (deprecated_value_address_hack): Remove.
5688 (VALUE_ADDRESS): Remove.
5689 (value_address): Declare.
5690 (value_raw_address): Declare.
5691 (set_value_address): Declare.
5693 2009-05-27 Tom Tromey <tromey@redhat.com>
5694 Thiago Jung Bauermann <bauerman@br.ibm.com>
5695 Phil Muldoon <pmuldoon@redhat.com>
5696 Paul Pluzhnikov <ppluzhnikov@google.com>
5698 * python/python.c (_initialize_python): Call
5699 gdbpy_initialize_types.
5700 (GdbMethods): Add "lookup_type".
5701 * python/python-value.c (value_object) <type>: New field.
5702 (valpy_dealloc): Decref type.
5703 (valpy_new): Initialize type.
5704 (valpy_get_type): New function.
5705 (value_to_value_object): Initialize type.
5706 (valpy_cast): New function.
5707 (value_object_getset): Add "type".
5708 (value_object_methods): Add "cast".
5709 * python/python-internal.h (type_to_type_object): Declare.
5710 (type_object_to_type): Likewise.
5711 (gdbpy_initialize_types): Likewise.
5712 (gdbpy_lookup_type): Declare.
5713 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
5714 (SUBDIR_PYTHON_SRCS): Add python-type.c.
5715 (python-type.o): New target.
5716 * python/python-type.c: New file.
5718 2009-05-27 Tom Tromey <tromey@redhat.com>
5719 Thiago Jung Bauermann <bauerman@br.ibm.com>
5720 Phil Muldoon <pmuldoon@redhat.com>
5722 * python/python.c: Include objfiles.h, observer.h.
5723 (gdbpy_auto_load): New global.
5724 (gdbpy_current_objfile): Likewise.
5725 (GDBPY_AUTO_FILENAME): New define.
5726 (gdbpy_new_objfile): New function.
5727 (gdbpy_get_current_objfile): Likewise.
5728 (gdbpy_objfiles): Likewise.
5729 (_initialize_python): Add "maint set auto-load". Call
5730 gdbpy_initialize_objfile. Attach objfile observer.
5731 (GdbMethods): New methods current_objfile, objfiles.
5732 * python/python-objfile.c: New file.
5733 * python/python-internal.h (objfile_to_objfile_object): Declare.
5734 (objfpy_get_printers): Likewise.
5735 (gdbpy_initialize_objfile): Likewise.
5736 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
5737 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
5738 (python-objfile.o): New target.
5740 2009-05-27 Pedro Alves <pedro@codesourcery.com>
5742 * infrun.c (follow_exec): Clear the stop_requested flag.
5743 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5746 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
5748 * nto-procfs.c (get_regset): Pass correct pointer.
5750 2009-05-26 Doug Evans <dje@google.com>
5752 * dwarf2read.c (follow_die_ref): Add comment.
5753 (dwarf2_mark_helper): Tweak comment.
5754 (dwarf2_mark): Move description to its proper place.
5756 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
5758 * procfs.c (procfs_wait): Add options parameter.
5760 2009-05-24 Doug Evans <dje@google.com>
5762 Global renaming of find_thread_pid to find_thread_ptid.
5763 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
5764 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
5765 All callers updated.
5767 * infrun.c (follow_fork): Initialize new step_* locals
5768 to avoid "may be used uninitialized" warnings.
5770 2009-05-24 Pedro Alves <pedro@codesourcery.com>
5772 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
5774 2009-05-24 Pedro Alves <pedro@codesourcery.com>
5776 * gdbthread.h (struct thread_info): New `pending_follow' field.
5777 * thread.c (new_thread): New function.
5778 (add_thread_silent): Use it.
5779 * breakpoint.c (internal_breakpoint_number): New global, moved
5781 (create_internal_breakpoint): ... this.
5782 (clone_momentary_breakpoint): New.
5783 * breakpoint.h (clone_momentary_breakpoint): Declare.
5784 * infrun.c (nullify_last_target_wait_ptid): Move declaration
5786 (pending_follow): Delete.
5787 (follow_fork): Handle pending follow fork event here. Moved the
5788 preserving of thread stepping state here.
5789 (resume): Don't handle pending follow fork events here. Only
5790 install the inferior's terminal modes if we're about to resume it.
5791 (proceed): Handle possible pending follow fork events here.
5792 (init_wait_for_inferior): No need to clear pending_follow anymore,
5794 (handle_inferior_event): Adjust to per-thread `pending_follow'.
5795 Call `follow_fork' to handle following the fork. If the
5796 follow-fork is cancelled, stop stepping.
5797 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
5798 `pending_follow' events. Remove code that handled preserving the
5799 thread stepping state.
5800 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
5801 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
5803 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
5805 * symfile.c (add_shared_symbol_files_command): Remove
5806 prototype and function.
5807 (_initialize _symfile): Move "add-shared-symbol-files"
5808 command and "assf" alias.
5809 * windows-nat.c (_initialize_windows_nat): to here.
5810 Change "add-shared-symbol-files" to alias.
5812 * config/i386/cygwin.mh: Remove NAT_FILE.
5813 * config/i386/mingw.mh: Remove NAT_FILE.
5814 * config/i386/mingw64.mh: Remove NAT_FILE.
5815 * config/i386/nm-cygwin.h: Remove file.
5816 * config/i386/nm-cygwin64.h: Remove file.
5818 2009-05-24 Hui Zhu <teawater@gmail.com>
5820 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
5821 I386_LINUX_RECORD_IOCTL_*,
5822 I386_LINUX_RECORD_FCNTL_*) Removed.
5823 (i386_linux_init_abi): Change size of record from macros to
5826 2009-05-24 Hui Zhu <teawater@gmail.com>
5828 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
5829 * linux-record.c (record_linux_system_call): Ditto.
5830 * linux-record.h (linux_record_tdep): Ditto.
5832 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5834 Replace the savestring calls by xstrdup calls where possible.
5835 * breakpoint.c (condition_command, set_raw_breakpoint)
5836 (create_catchpoint, update_breakpoint_locations): Replace the
5837 savestring calls by xstrdup calls where possible.
5838 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
5839 (record_producer): Likewise.
5840 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
5841 * corefile.c (set_gnutarget): Likewise.
5842 * dbxread.c (add_new_header_file): Likewise.
5843 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
5844 * event-top.c (push_prompt, pop_prompt, command_line_handler)
5845 (set_async_prompt): Likewise.
5846 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
5848 * language.c (set_language_command, _initialize_language): Likewise.
5849 * linespec.c (decode_line_2): Likewise.
5850 * rs6000-nat.c (add_vmap): Likewise.
5851 * top.c (set_prompt, init_history, init_main): Likewise.
5852 * tracepoint.c (stringify_collection_list): Likewise.
5853 * varobj.c (varobj_create): Remove variable expr_len. Replace the
5854 savestring calls by xstrdup calls where possible.
5855 (value_of_root, c_name_of_variable, c_describe_child): Replace the
5856 savestring calls by xstrdup calls where possible.
5857 * xcoffread.c (complete_symtab): Likewise.
5858 * cli/cli-script.c (build_command_line, define_command): Likewise.
5859 * cli/cli-setshow.c (do_setshow_command): Likewise.
5861 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5863 Remove already unreachable code.
5864 * varobj.c (varobj_get_handle): Fix comment when error is called.
5865 All callers updated.
5867 2009-05-23 Eli Zaretskii <eliz@gnu.org>
5869 * README (`configure' options): Document GDB-specific options to
5872 * symtab.c (skip_prologue_using_lineinfo): New function.
5873 (find_function_start_sal): Use it to get to the first line of
5874 function's body that has an entry in the lineinfo table.
5876 * symmisc.c (dump_symtab): Switch the current language to
5877 the language of the symtab we are dumping only if the symtab's
5878 language is neither language_auto nor language_unknown.
5880 * coffread.c (coff_symtab_read): Set language_minimal as the
5881 language for the "_globals_" pseudo-file.
5882 (process_coff_symbol): Set the symbol's language to the language
5885 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5887 * target.h (struct section_table): Rename to ...
5888 (struct target_section): ... this.
5889 * exec.c: Adjust all references.
5890 * exec.h: Adjust all references.
5891 * nto-tdep.c: Adjust all references.
5892 * nto-tdep.h: Adjust all references.
5893 * ppc-linux-tdep.c: Adjust all references.
5894 * rs6000-nat.c: Adjust all references.
5895 * s390-tdep.c: Adjust all references.
5896 * solib-darwin.c: Adjust all references.
5897 * solib-frv.c: Adjust all references.
5898 * solib-irix.c: Adjust all references.
5899 * solib-null.c: Adjust all references.
5900 * solib-osf.c: Adjust all references.
5901 * solib-pa64.c: Adjust all references.
5902 * solib-som.c: Adjust all references.
5903 * solib-sunos.c: Adjust all references.
5904 * solib-svr4.c: Adjust all references.
5905 * solib-target.c: Adjust all references.
5906 * solib.c: Adjust all references.
5907 * solist.h: Adjust all references.
5908 * symfile.c: Adjust all references.
5909 * symfile.h: Adjust all references.
5910 * target.c: Adjust all references.
5912 2009-05-22 Hui Zhu <teawater@gmail.com>
5914 Add sys_fcntl argument interfaces to linux_record_tdep.
5916 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
5917 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
5919 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
5920 I386_LINUX_RECORD_FCNTL_F_GETLK64,
5921 I386_LINUX_RECORD_FCNTL_F_SETLK64,
5922 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
5923 of I386 Linux sys_fcntl arguments.
5924 (i386_linux_init_abi): Set macros values to linux_record_tdep.
5925 * linux-record.c (record_linux_system_call): Change to use
5926 the interface in linux_record_tdep in sys_fcntl and
5929 * linux-record.c (record_linux_system_call): Fix the process
5930 record build error about type in CYGWIN.
5932 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5934 * inflow.c (kill_command): Delete left over static declaration.
5936 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5938 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
5940 (struct section_closure): Delete.
5941 (add_to_section_table): Delete.
5942 (build_target_sections_from_bfd): Delete.
5943 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
5944 (target_bfd_reopen): Use build_section_table.
5945 * exec.c (xfer_memory): Move most code except for overlay
5946 debugging support from here...
5947 (section_table_xfer_memory): ... to this new function.
5948 (section_table_xfer_memory_partial): New.
5949 * exec.h (section_table_xfer_memory_partial): Declare.
5950 * bfd-target.h (build_target_sections_from_bfd): Delete
5953 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5955 * remote.c (compare_sections_command): Don't declare exec_bfd.
5956 * tracepoint.c: Include "gdbcore.h".
5957 (remote_set_transparent_ranges): Don't declare exec_bfd.
5959 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5961 * aix-thread.c (init_aix_thread_ops): Whitespace.
5963 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5965 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
5966 to call the to_wait method in the target beneath.
5967 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
5969 2009-05-21 Joel Brobecker <brobecker@adacore.com>
5971 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
5972 to call the to_wait method in the target_beneath.
5974 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5976 * linux-nat.c (linux_nat_terminal_inferior)
5977 (linux_nat_terminal_ours): Don't check sync_execution.
5978 * remote.c (remote_terminal_inferior, remote_terminal_ours):
5979 Don't check sync_execution. Update comments.
5980 * target.c (target_terminal_inferior): New.
5981 * target.h (target_terminal_inferior): Delete macro, and declare
5983 * event-top.c (async_disable_stdin): Make idempotent. Don't give
5984 the target the terminal here.
5985 * inflow.c (terminal_ours_1): Don't return early without setting
5988 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5990 * target.h (TARGET_WNOHANG): New.
5991 * target.c (target_wait): Add `options' argument. Adjust.
5992 (struct target_ops) <to_wait>: Add `options' argument.
5993 (target_wait): Add `options' argument.
5994 * infrun.c (wait_for_inferior): Pass 0 as options to
5995 target_wait (blocking wait).
5996 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
5998 * fork-child.c (startup_inferior): Pass 0 as options to
5999 target_wait (blocking wait).
6000 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
6001 (linux_nat_wait_1): Add `target_options' argument. Use it instead
6002 of checking on target_can_async_p.
6003 (linux_nat_wait): Add `target_options' argument. Adjust.
6004 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
6005 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
6006 (remote_wait_as): Add `options' argument. Adjust to check on
6007 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
6008 a blocking wait, keep waiting until an interesting event comes
6010 (remote_wait): Add `options' argument. Don't loop here if the
6011 target is in async mode, and a blocking wait has been requested.
6013 * top.c (deprecated_target_wait_hook): Add `options' argument.
6014 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
6015 pass it down to the layer beneath.
6016 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
6017 * record.c (record_beneath_to_wait): Add `options' argument.
6018 (record_wait): Add `options' argument, and pass it down to the
6020 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
6021 * darwin-nat.c (darwin_wait): Likewise.
6022 * defs.h (deprecated_target_wait_hook): Likewise.
6023 * gnu-nat.c (gnu_wait): Add `options' argument.
6024 * go32-nat.c (go32_wait): Likewise.
6025 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
6026 pass it down to the layer beneath.
6027 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
6028 * monitor.c (monitor_wait): Likewise.
6029 * nto-procfs.c (procfs_wait): Likewise.
6030 * remote-mips.c (mips_wait): Add `options' argument.
6031 * remote-sim.c (gdbsim_wait): Likewise.
6032 * rs6000-nat.c (rs6000_wait): Add `options' argument.
6033 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
6034 it down to the layer beneath.
6035 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
6036 * windows-nat.c (windows_wait): Likewise.
6037 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
6039 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6041 * mi/mi-interp.c (mi_on_resume): Account for whole process
6044 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6046 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
6048 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6050 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
6052 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6054 Fix parsing DW_AT_const_value using DW_FORM_string.
6055 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
6057 2009-05-20 Joel Brobecker <brobecker@adacore.com>
6059 * aix-thread.c (giter_count): Do not count the main thread.
6060 (giter_accum): Do not include the main thread.
6062 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
6064 Remove the PROT parameter from openp.
6065 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
6066 defs.h (openp): Update the prototype.
6067 Update all the openp callers.
6069 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6071 * inflow.c (kill_command): Moved to infcmd.c.
6072 (_initialize_inflow): Don't add the "kill" command or clear
6074 * infcmd.c (kill_command): Moved here from inflow.c.
6075 (_initialize_infcmd): Add the "kill" command here.
6077 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6079 * fork-child.c: Don't include frame.h. Include terminal.h.
6080 (fork_inferior): Call new_tty_postfork after forking adn adding
6081 the child to the inferior list.
6082 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
6084 * inflow.c (struct terminal_info): Remove const qualifier from
6085 `run_terminal' field.
6086 (inferior_thisrun_terminal): Tweak comment.
6087 (inflow_inferior_exit): Release the `run_terminal' field.
6088 (copy_terminal_info): New function.
6089 (new_tty_postfork): New function.
6090 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
6091 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
6092 * inf-ptrace.c: Include terminal.h.
6093 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
6095 * linux-nat.c: Include terminal.h.
6096 (linux_child_follow_fork): Copy the parent's terminal info to the
6098 * inf-ttrace.c: Include terminal.h.
6099 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
6102 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6104 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
6105 (update_global_location_list): Use gdbarch_has_global_breakpoints
6106 instead of gdbarch_has_global_solist and
6107 target_supports_multi_process.
6108 * dicos-tdep.c (dicos_init_abi): Set
6109 gdbarch_has_global_breakpoints.
6110 * gdbarch.sh (has_global_solist): Update comment.
6111 (has_global_breakpoints): New.
6112 * remote.c (remote_start_remote): Use
6113 gdbarch_has_global_breakpoints instead of
6114 gdbarch_has_global_solist.
6115 * target.c (target_detach): Use gdbarch_has_global_breakpoints
6116 instead of gdbarch_has_global_solist.
6117 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
6118 of target_supports_multi_process.
6120 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
6122 * objc-lang.c (find_methods): Plug a small memory leak.
6124 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6126 * solib-svr4.c: Include observer.h.
6127 (debug_base, debug_loader_offset_p, debug_loader_offset)
6128 (debug_loader_name, main_lm_addr): Move these globals...
6129 (struct svr4_info): ... into this new structure.
6130 (svr4_info_p): New typedef.
6131 (svr4_info): New global.
6132 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
6134 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
6135 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
6137 (open_symbol_file_object): Adjust to per-inferior svr4.
6138 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
6140 (enable_break): Add svr4_info argument. Adjust to per-inferior
6142 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
6143 Adjust to per-inferior svr4.
6144 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
6147 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6149 * linux-nat.h (linux_proc_get_tgid): Declare.
6150 * linux-nat.c (linux_proc_get_tgid): New.
6151 * linux-thread-db.c (struct thread_db_info): New field
6152 `need_stale_parent_threads_check'.
6153 (add_thread_db_info): Set it.
6154 (find_new_threads_callback): Ignore stale fork parent threads.
6155 (thread_db_resume): New.
6156 (init_thread_db_ops): Install thread_db_resume.
6158 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6160 * fork-child.c (fork_inferior): Only reset the thread list if this
6161 is the first inferior.
6162 (startup_inferior): If the target support multi-process, tell it
6163 to resume only the new process.
6164 * linux-nat.c (num_lwps): Delete global.
6165 (purge_lwp_list): New function.
6166 (num_lwps): New function.
6167 (add_lwp, delete_lwp): Adjust.
6169 (iterate_over_lwps): Add filter argument. Handle it.
6170 (linux_nat_attach): Remove FIXME note.
6171 (linux_nat_detach): Adjust to iterate over threads of the inferior
6172 we're detaching from. Adjust to num_lwps being a function. Don't
6173 assume the head of the lwp list is the main thread of the process
6174 we're detaching from. Don't destroy the LWP list.
6175 (resume_callback): Add debug output.
6176 (linux_nat_resume): Handle resuming a single inferior. Allow a
6177 wildcard resume in non-stop mode.
6178 (linux_handle_extended_wait): Don't assume inferior_ptid is the
6179 correct inferior of the parent LWP.
6180 (status_callback): Also check lp->waitstatus.
6181 (select_event_lwp): Add new filter parameter. Handle it.
6182 (linux_nat_filter_event): Adjust to num_lwps being a function.
6183 (linux_nat_wait_1): When adding the first lwp of the inferior, use
6184 an is_lwp check instead of checking for the number of lwps.
6185 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
6186 pending process exit statuses.
6187 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
6188 Instead delete LWPs of the inferior that we're mourning. Don't
6189 unregister from the event loop here.
6190 (linux_nat_pid_to_str): Use `num_lwps'.
6191 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
6193 (linux_nat_is_async_p): Check if async was masked out.
6194 (linux_multi_process): New global.
6195 (linux_nat_supports_multi_process): New.
6196 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
6198 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
6200 (linux_nat_close): New.
6201 (linux_nat_add_target): Register linux_nat_close and
6202 linux_nat_supports_multi_process.
6203 * linux-nat.h (iterate_over_lwps): Add filter argument.
6204 * linux-thread-db.c (thread_db_handle): Delete.
6205 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
6206 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
6207 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
6208 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
6209 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
6210 longer globals, moved to...
6211 (struct thread_db_info): ... this new structure.
6212 (thread_db_list): New.
6213 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
6215 (have_threads_callback): Filter out threads of all inferiors but
6216 the one specified by the ARGS argument.
6217 (have_threads): Add ptid argument specifying the inferior we're
6218 interested in. Handle it.
6219 (struct thread_get_info_inout): New.
6220 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
6221 (thread_db_attach_lwp): Check that inferior of the passed in
6222 thread is using thread-db. Adjust.
6223 (enable_thread_event): Remove thread_agent parameter. Instead,
6224 get it from the per-inferior thread-db info.
6225 (dladdr_to_soname): Move higher up.
6226 (enable_thread_event_reporting): Adjust to use per-inferior
6228 (try_thread_db_load_1): Replace `handle' parameter by a
6229 thread_db_info parameter. Adjust to use per-inferior thread-db
6231 (try_thread_db_load): Adjust to use per-inferior thread-db info.
6232 (thread_db_load, disable_thread_event_reporting): Ditto.
6233 (check_for_thread_db): Remove conditional reporting of which
6234 libthread_db is in use.
6235 (thread_db_new_objfile): Add comment about inferior_ptid.
6236 (attach_thread): Adjust to use per-inferior thread-db info.
6237 (thread_db_detach): Adjust to use per-inferior thread-db info.
6238 Remove thread event breakpoints of the current inferior. Only
6239 unpush the thread-db target if there are no more processes using
6241 (check_event): Adjust to use per-inferior thread-db info.
6242 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
6243 unpush the thread-db target if there are no more processes using
6245 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
6246 info. Mark breakpoints of the current inferior out before
6247 deleting them. Only unpush the thread-db target if there are no
6248 more processes using it.
6249 (find_new_threads_callback): Adjust to use per-inferior thread_db
6251 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
6252 use per-inferior thread-db info.
6253 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
6255 (thread_db_get_thread_local_address): Adjust.
6256 (thread_db_get_ada_task_ptid): Adjust.
6257 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
6258 if there no more processes left to debug.
6259 * thread.c (set_running, set_executing): Handle resuming all
6260 threads of a single inferior.
6261 * mi/mi-interp.c (mi_output_running_pid): New.
6262 (mi_inferior_count): New.
6263 (mi_on_resume): For backwards compatibility, if resuming all
6264 threads of an inferior, and there is only one inferior, output
6267 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6269 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
6270 (to_fixed_range_type): ... to here.
6272 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6274 * ada-lang.c (desc_data_type): Remove, replace by ...
6275 (desc_data_target_type): ... this.
6276 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
6277 (ada_is_array_descriptor_type): Likewise.
6278 (ada_type_of_array): Likewise.
6279 (ada_coerce_to_simple_array_type): Likewise.
6280 (ada_array_element_type): Likewise.
6282 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6284 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
6285 result of ada_vax_float_print_function inferior call.
6287 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6289 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
6290 avoid creating a dummy value.
6292 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6294 * p-valprint.c (pascal_val_print): Use extract_typed_address
6295 to extract reference value.
6297 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6299 * doublest.c (NAN): Remove unused define.
6300 (extract_floating_by_length, deprecated_extract_floating): Remove.
6301 (store_floating_by_length, deprecated_store_floating): Remove.
6302 (extract_typed_floating): Do not call extract_floating_by_length.
6303 (store_typed_floating): Do not call store_floating_by_length.
6304 (convert_typed_floating): Remove redundant assertions.
6305 * doublest.h (deprecated_extract_floating): Remove.
6306 (deprecated_store_floating): Remove.
6307 * sh64-tdep.c (sh64_register_convert_to_raw): Call
6308 extract_typed_floating instead of deprecated_extract_floating.
6310 2009-05-18 Jon Beniston <jon@beniston.com>
6312 * MAINTAINERS: Add lm32 target.
6313 * Makefile.in: Add lm32 dependencies.
6314 * NEWS: Indicate lm32 is a new target.
6315 * configure.tgt: Add lm32 targets.
6316 * lm32-tdep.c: New file.
6318 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6320 * corelow.c (core_open): Flush the register cache before doing
6321 anything with registers.
6323 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6325 * inflow.h (our_process_group): Remove declaration.
6326 (inferior_process_group): Delete global variable declaration.
6327 (inferior_process_group): New function declaration.
6328 * inflow.c: Include observer.h.
6329 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
6331 (struct terminal_info): New struct.
6332 (our_terminal_info): New global.
6333 (inferior_process_group): New function.
6334 (inferior_thisrun_terminal): Extend description comment.
6335 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
6337 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
6339 (terminal_inferior): Ditto.
6340 (terminal_ours_1): Ditto.
6341 (inflow_new_inferior, inflow_inferior_exit): New functions.
6342 (child_terminal_info): Adjust to per-inferior terminal settings.
6343 (osig_set): New global.
6344 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
6345 or clear `osig_set' accordingly.
6346 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
6347 SIGINT handler, instead of checking the current inferior (which
6349 (_initialize_inflow): Attach inflow_new_inferior and
6350 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
6351 notifications, respectively.
6352 * inferior.h (struct terminal_info): Forward declare.
6353 (struct inferior): Add `terminal_info' field.
6354 * inferior.c (delete_inferior_1): Notify the inferior_exit
6355 observers before removing the inferior from the lists and deleting
6357 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
6358 a function instead of a variable. Adjust.
6359 * procfs.c (procfs_stop): Ditto.
6361 2009-05-17 Pedro Alves <pedro@codesourcery.com>
6363 * infrun.c (handle_inferior_event): When handling a
6364 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
6366 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
6367 from the child if vforking.
6368 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
6369 breakpoints from the child here.
6371 2009-05-17 Pedro Alves <pedro@codesourcery.com>
6373 * infrun.c (pending_follow): Remove execd_pathname member.
6374 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
6375 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
6376 event, don't copy `execd_pathname' to pending_follow, use the
6377 event copy instead. Release `execd_pathname' once done with
6380 * infrun.c (pending_follow): Remove mention of exec events.
6382 2009-05-17 Hui Zhu <teawater@gmail.com>
6384 * i386-tdep.c (i386_process_record): Make it extern.
6385 (i386_gdbarch_init): Don't call set_gdbarch_process_record
6387 * i386-tdep.h (i386_process_record): Declare.
6388 * i386-linux-tdep.c (i386_linux_init_abi): Call
6389 set_gdbarch_process_record.
6391 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
6393 Always report varobj as changed when in_scope attribute changes.
6395 * varobj.c (install_new_value): If non-NULL-ness of value
6398 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
6400 * NEWS: Mention set/show libthread-db-search-path.
6401 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
6402 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
6403 * linux-thread-db.c (libthread_db_search_path): New setting.
6404 (thread_db_handle): New variable (replaces using_thread_db).
6405 (try_thread_db_load_1): New function.
6406 (try_thread_db_load, thread_db_load_search): Likewise.
6407 (dladdr_to_soname): Likewise.
6408 (thread_db_load): Iterate over possibly multiple libthread_db's.
6409 (check_for_thread_db): Attempt to load new libthread_db.
6410 (thread_db_detach, thread_db_wait): Unload libthread_db.
6411 (thread_db_mourn_inferior): Likewise.
6412 (_initialize_thread_db): Add new libthread-db-search-path option.
6413 Defer loading of libthread_db to check_for_thread_db.
6414 * solib.c (libpthread_name_p): New function.
6415 (libpthread_solib_p): Call it.
6416 * solib.h (libpthread_name_p): New prototype.
6418 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
6420 * MAINTAINERS: Update my email address.
6422 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
6424 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
6425 * breakpoint.c (create_overlay_event_breakpoint): Renamed
6426 from create_overlay_event_breakpoint_1, old
6427 create_overlay_event_breakpoint deleted.
6428 (breakpoint_re_set_objfile): Don't rescan all objfiles
6430 (breakpoint_re_set): New function.
6431 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
6432 instead of breakpoint_re_set.
6433 * objfiles.c (objfile_relocate): Likewise.
6435 2009-05-14 Joel Brobecker <brobecker@adacore.com>
6437 * gdbarch.sh: Add comment documenting the target_gdbarch global.
6438 gdbarch.h does NOT need to be regenerated as the corresponding
6439 change has already been made in a previous commit.
6441 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
6443 Remove all i386 debug register low level macros in config nm files.
6444 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
6445 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
6446 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
6448 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
6449 (struct i386_dr_low_type): New type.
6450 (i386_dr_low): New global variable.
6451 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
6452 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
6453 i386_dr_low struct variable fields.
6454 (i386_remove_aligned_watchpoint): Likewise.
6455 (i386_stopped_data_address): Likewise.
6456 (i386_stopped_by_hwbp): Likewise.
6457 (show_debug_regs_command_added): New static variable.
6458 (add_show_debug_regs_command): New static function.
6459 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
6460 (i386_set_debug_register_length): New function.
6461 (_initialize_i386_nat): Delete.
6463 * amd64-linux-nat.c: Include "i386-nat.h".
6464 (amd64_linux_dr_set_control): Change to static.
6465 (amd64_linux_dr_get_status): Change to static.
6466 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
6467 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
6469 * go32-nat.c: Include "i386-nat.h".
6470 (go32_set_addr): Change to static.
6471 (go32_set_dr7): Change to static. Change arg type to unisgned long.
6472 (go32_get_dr6): Change to static. Change return type to unisnged long.
6473 (init_go32_ops): Set i386_dr_low variable fields.
6474 * i386-linux-nat.c: Include "i386-nat.h".
6475 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
6476 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
6477 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
6478 * i386bsd-nat.h: Declare functions used for
6479 i386_dr_low fields in i386fbsd-nat.c.
6480 * i386fbsd-nat.c: Include "i386-nat.h".
6481 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
6482 * windows-nat.c: Include "i386-nat.h".
6483 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
6485 (cygwin_get_dr6): Change return type to unisnged long.
6486 (cygwin_set_dr7): Change arg type to unisgned long.
6487 (init_windows_ops): Set i386_dr_low function fields.
6489 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
6490 i386_set_debug_register_length.
6491 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
6493 * config/i386/nm-cygwin.h: Remove all I386_* macros.
6494 * config/i386/nm-cygwin64.h: Likewise.
6495 * config/i386/nm-fbsd.h: Likewise.
6496 * config/i386/nm-linux.h: Likewise.
6497 * config/i386/nm-i386.h: Remove completely.
6498 * config/i386/nm-go32.h: Remove completely.
6499 * config/i386/nm-linux64.h: Remove completely.
6500 * config/i386/go32.mh (NAT_FILE): Remove entry.
6501 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
6503 2009-05-14 Jon Beniston <jon@beniston.com>
6505 * MAINTAINERS: Add Jon Beniston to write after approval list.
6507 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
6509 * objc-lang.c (objc_objfile_data): New variable.
6510 (find_methods): Skip objfiles without Obj-C methods.
6511 (_initialize_objc_lang): New function.
6513 2009-05-13 Joel Brobecker <brobecker@adacore.com>
6515 * c-lang.c (print_wchar): Remove unnecessary cast.
6517 2009-05-12 Jim Blandy <jimb@red-bean.com>
6519 * MAINTAINERS: Remove self as m32c target maintainer.
6521 2009-05-12 Pedro Alves <pedro@codesourcery.com>
6523 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
6524 * command.h (deprecated_add_set_cmd): Delete declaration.
6525 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
6526 'set debug gnu-nat' and 'show debug gnu-nat'.
6527 * i386-nat.c (_initialize_i386_nat): Replace 'maint
6528 show-debug-registers' with 'maint set show-debug-registers' and
6529 'maint show show-debug-registers'.
6530 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
6531 show-debug-registers' with 'maint set show-debug-registers' and
6532 'maint show show-debug-registers'.
6534 2009-05-12 Joel Brobecker <brobecker@adacore.com>
6536 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
6537 pushing it on the output obstack.
6539 2009-05-11 Joel Brobecker <brobecker@adacore.com>
6541 Fix internal error on breaking at a multi-locations caller source line.
6542 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
6543 command with no parameters.
6545 2009-05-11 Pedro Alves <pedro@codesourcery.com>
6547 * linux-nat.c (enum sigchld_state): Delete.
6548 (linux_nat_async_events_state): Delete.
6549 (struct waitpid_result): Delete.
6550 (waitpid_queue): Delete.
6551 (queued_waitpid_1): Delete.
6552 (async_file_flush): New.
6553 (queued_waitpid, push_waitpid): Delete.
6554 (async_file_mark): New.
6555 (drain_queued_events): Delete.
6556 (my_waitpid): Remove locally queued events handling.
6557 (linux_test_for_tracefork): Upjust.
6558 (linux_child_follow_fork): Ditto.
6559 (sync_sigchld_action): Delete.
6560 (blocked_mask): Reinstate.
6561 (async_sigchld_action): Rename to...
6562 (sigchld_action): ... this.
6563 (block_child_signals): New.
6564 (restore_child_signals_mask): New.
6565 (lin_lwp_attach_lwp): Adjust.
6566 (linux_nat_create_inferior): Ditto.
6567 (linux_nat_attach): Also use lp->status in async mode.
6568 (get_pending_status): Don't use queued_waitpid.
6569 (linux_nat_detach): Don't drain locally queued events.
6570 (linux_nat_resume): Allow pending wait statuses stored lp->status
6571 in async mode. If returning early due to a pending event,
6572 re-register the event source.
6573 (stop_wait_callback): Allow pending wait statuses stored
6574 lp->status in async mode.
6575 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
6576 (linux_nat_wait): Rename to ...
6577 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
6578 lp->status in async mode. Always add WNOHANG to the waitpid
6579 options in async mode.
6580 (linux_nat_wait): New.
6581 (kill_callback): Don't drain locally queued events.
6582 (sigchld_handler): Rewrite.
6583 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
6584 refer to "set target-async".
6585 (linux_nat_async_mask): If in non-stop, and re-enabling async
6586 mode, re-register the target event source in the event loop.
6587 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
6588 (get_pending_events, async_sigchld_handler)
6589 (linux_nat_async_events): Delete.
6590 (handle_target_event): New.
6591 (linux_nat_async_file_handler): Delete.
6592 (linux_async_pipe): New.
6593 (linux_nat_async): Only re-register in the event loop if not
6594 registered yet. Always notify the event-loop once if enabling the
6596 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
6597 lp->status, not in the locally queued event list.
6598 (linux_nat_stop): Don't mask out async event handling.
6599 (linux_nat_setup_async): Delete.
6600 (_initialize_linux_nat): Adjust.
6601 (lin_thread_get_thread_signals): blocked_mask is global again.
6604 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
6606 Unify target macros.
6608 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
6609 (target_stoppped_by_watchpoint): New macro.
6610 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
6611 (target_have_steppable_watchpoint): New macro.
6612 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
6613 (target_have_continuable_watchpoint): New macro.
6614 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
6615 (target_can_use_hardware_watchpoint): New macro.
6616 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
6617 (target_region_ok_for_hw_watchpoint): New macro.
6619 * breakpoint.c (update_watchpoint): Use new macros.
6620 (bpstat_alloc): Likewise.
6621 (create_breakpoint): Likewise.
6622 (watch_command_1): Likewise.
6623 (can_use_hardware_watchpoint): Likewise.
6624 (do_enable_breakpoint): Likewise.
6625 * infrun.c (handle_inferior_event): Adapt to new macros.
6626 * mips-tdep.c (mips_gdbarch_init): Update comments.
6627 * procfs.c (procfs_set_watchpoint): Update comment.
6628 (procfs_insert_watchpoint): Adapt to new macros.
6629 * remote-m32r-sdi.c (m32r_stop):
6630 * remote-mips.c (mips_remove_breakpoint):
6631 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
6632 (debug_to_stopped_by_watchpoint): Likewise.
6635 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
6637 * src/gdb/target.h: Remove all tests for already defined
6638 macros. All macros defined here should not be set in config
6641 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
6643 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
6644 (have_ptrace_getsetfpregs): Likewise.
6645 fetch_all_gp_regs): New function.
6646 (fetch_gp_regs): New function.
6647 (fetch_all_fp_regs): Likewise.
6648 (fetch_fp_regs): New function.
6649 (fetch_ppc_registers): Using the new methods to fetch general-
6650 purpose and floating-pointer registers.
6651 (store_all_gp_regs): New function.
6652 (store_gp_regs): Likewise.
6653 (store_all_fp_regs): New function.
6654 (store_fp_regs): Likewise.
6655 (store_ppc_registers): Using the new methods to store general-
6656 purpose and floating-pointer registers.
6658 2009-05-08 Doug Evans <dje@google.com>
6660 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
6662 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
6664 * MAINTAINERS (Write After Approval): Add self.
6666 2009-05-07 Joel Brobecker <brobecker@adacore.com>
6668 * gdbarch.h (target_gdbarch): Add comment documenting this global.
6670 2009-05-06 Joel Brobecker <brobecker@adacore.com>
6672 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
6674 * configure: Regenerate.
6676 2009-05-06 Joel Brobecker <brobecker@adacore.com>
6678 * utils.c: Add include of gdb_usleep.h.
6679 (defaulted_query): Detect false EOF conditions that happen
6680 on terminals opened with the O_NONBLOCK flag when there is
6683 2009-05-06 Pedro Alves <pedro@codesourcery.com>
6685 * inferior.c (add_inferior): Move observer_notify_new_inferior
6687 (add_inferior_silent): ... here.
6689 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
6690 Pedro Alves <pedro@codesourcery.com>
6692 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
6693 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
6695 (procfs_stopped_by_watchpoint): Made static, ptid argument
6697 (_initialize_procfs): Register new watchpoint related target
6699 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
6700 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
6701 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
6702 (target_insert_watchpoint, target_remove_watchpoint): Delete.
6703 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
6705 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
6706 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
6707 (target_insert_watchpoint, target_remove_watchpoint): Delete.
6708 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
6710 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
6711 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
6712 (target_insert_watchpoint, target_remove_watchpoint): Delete.
6713 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
6716 2009-05-06 Hui Zhu <teawater@gmail.com>
6718 * i386-tdep.c (i386_process_record): Change bzero to memset.
6720 2009-05-06 Hui Zhu <teawater@gmail.com>
6722 * NEWS: Add item for process record and replay.
6724 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
6726 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
6728 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
6730 * inferior.h (read_pc, write_pc): Remove.
6731 * regcache.c (read_pc, write_pc): Remove.
6733 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
6735 (handle_inferior_event): Use regcache_read_pc instead of read_pc
6736 when determining value of stop_pc. Replace subsequent uses of
6737 read_pc by inspecting already-retrieved stop_pc value.
6738 (keep_going): Use regcache_read_pc instead of read_pc.
6740 * breakpoint.c (watchpoint_check): Use current frame architecture
6741 and PC instead of current_gdbarch and read_pc ().
6742 * tracepoint.c (set_traceframe_context): Replace PC argument
6743 with FRAME argument.
6744 (trace_start_command, finish_tfind_command): Update calls.
6745 (finish_tfind_command): Compare frame IDs to identify transitions
6747 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
6748 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
6749 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
6750 of read_pc and write_pc.
6751 (store_register): Make regcache argument non-const. Update call
6752 to exec_one_dummy_insn.
6754 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
6755 * infcmd.c (post_create_inferior): Likewise.
6756 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
6757 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
6758 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
6759 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
6760 * linux-fork.c (fork_load_infrun_state): Likewise.
6761 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
6762 * record.c (record_wait): Likewise.
6763 * procfs.c (procfs_wait): Likewise.
6764 * remote-mips.c (common_open, mips_wait): Likewise.
6765 * remote-m32r-sdi.c (m32r_resume): Likewise.
6767 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
6768 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
6769 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
6770 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
6771 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
6773 * solib-darwin.c: Include "regcache.h".
6774 * solib-pa64.c: Include "regcache.h".
6775 * solib-svr4.c: Include "regcache.h.".
6777 * symfile.c: Do not mention read_pc or write_pc in comments.
6778 * dink32-rom.c: Likewise.
6779 * m32r-rom.c: Likewise.
6780 * mips-tdep.c: Likewise.
6782 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
6784 * fork-child.c (startup_inferior): Move setting stop_pc ...
6785 * infcmd.c (post_create_inferior): ... to here.
6787 2009-05-04 Michael Snyder <msnyder@vmware.com>
6789 * NEWS: Add item for reverse debugging commands.
6791 2009-05-04 Pedro Alves <pedro@codesourcery.com>
6793 * go32-nat.c (go32_stop): Delete.
6794 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
6795 (go32_create_inferior): Don't call go32_stop or
6797 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
6799 (init_go32_ops): Don't register go32_stop.
6801 2009-05-02 Eli Zaretskii <eliz@gnu.org>
6803 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
6806 * infcall.c (find_function_addr): Avoid compiler warnings for
6809 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
6811 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
6812 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
6814 2009-05-01 Doug Evans <dje@google.com>
6816 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
6819 2009-05-01 Eli Zaretskii <eliz@gnu.org>
6821 * record.c (_initialize_record): Reformat and clarify doc strings
6822 for stop-at-limit and insn-number-max.
6824 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
6826 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
6828 Make specifiable the make_function_type type memory ownership.
6829 * gdbtypes.c (make_function_type): New parameter `objfile', use it
6830 explicitely instead of TYPE-initialized removed local variable
6831 `objfile'. Describe `objfile' it in the function comment.
6832 (lookup_function_type): Update make_function_type callers.
6833 * gdbtypes.h (make_function_type): Update the prototype.
6834 * jv-lang.c (java_link_class_type): Update make_function_type callers.
6835 * dwarf2read.c (read_subroutine_type): Likewise.
6836 * stabsread.c (read_type): Likewise.
6838 2009-05-01 Eli Zaretskii <eliz@gnu.org>
6840 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
6841 printing a bogus "Thread <main>".
6842 (go32_thread_alive): Don't return 1 for null_ptid.
6844 * i386-tdep.c (i386_go32_init_abi): Override the number of
6845 registers due to non-support of SSE.
6847 2009-04-30 Anthony Green <green@moxielogic.com>
6849 * configure.tgt: Link the moxie simulator in with gdb.
6851 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
6853 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
6856 2009-04-30 Hui Zhu <teawater@gmail.com>
6857 Michael Snyder <msnyder@vmware.com>
6859 I386 Linux process record and replay support.
6861 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
6862 This struct has the argument for the function
6863 "record_linux_system_call".
6864 (i386_linux_intx80_sysenter_record): New function. Parse the
6865 system call instruction and call function
6866 "record_linux_system_call" to record execute log.
6867 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
6868 Set "i386_linux_intx80_sysenter_record" to
6869 "i386_intx80_record" and "i386_sysenter_record".
6871 2009-04-30 Hui Zhu <teawater@gmail.com>
6872 Michael Snyder <msnyder@vmware.com>
6874 I386 architecture process record and replay support.
6876 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
6877 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
6879 (aflag, dflag, override, modrm, mod, reg, rm, ot,
6880 i386_record_pc): New variables. Ditto.
6881 (i386_record_modrm, i386_record_lea_modrm_addr,
6882 i386_record_lea_modrm): New functions. Ditto.
6883 (i386_process_record): New function. Parse the instruction in
6884 address "addr" and record the values of registers and memory
6885 that will be changed by this instruction.
6886 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
6887 "process_record" interface.
6888 * i386-tdep.h (gdbarch_tdep): New function pointers
6889 "i386_intx80_record" and "i386_sysenter_record" that point to
6890 the function that can record "intx80" and "sysenter" execute
6893 2009-04-30 Hui Zhu <teawater@gmail.com>
6894 Michael Snyder <msnyder@vmware.com>
6896 * infrun.c (use_displaced_stepping): Return false if process
6897 record and replay target is used.
6898 (proceed): Call function "record_not_record_set" if pocess
6899 record and replay target is used.
6901 2009-04-30 Hui Zhu <teawater@gmail.com>
6902 Michael Snyder <msnyder@vmware.com>
6904 Linux process record and replay support.
6906 * Makefile.in (ALLDEPFILES): Add linux-record.c.
6907 (ALL_TARGET_OBS): Add linux-record.o.
6908 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
6909 (i[34567]86-*-linux*): Add linux-record.o.
6910 * linux-record.c, linux-record.h: New file.
6912 2009-04-30 Hui Zhu <teawater@gmail.com>
6913 Michael Snyder <msnyder@vmware.com>
6915 Process record and replay target.
6917 * Makefile.in (SFILES): Add record.c.
6918 (COMMON_OBS): Add record.o.
6919 * record.c, record.h: New file.
6921 2009-04-30 Hui Zhu <teawater@gmail.com>
6922 Michael Snyder <msnyder@vmware.com>
6924 * target.h (strata): New stratum "record_stratum".
6926 2009-04-30 Hui Zhu <teawater@gmail.com>
6927 Michael Snyder <msnyder@vmware.com>
6929 GDBARCH interface for process record and replay.
6931 * gdbarch.sh (process_record): This interface point to the
6932 function that records the inferior execute log.
6934 2009-04-29 Doug Evans <dje@google.com>
6936 * i386-nat.c (child_post_startup_inferior): Delete, unused.
6938 2009-04-29 Pedro Alves <pedro@codesourcery.com>
6940 * breakpoint.c (print_exception_catchpoint): Access `b' directly
6941 instead of `b->loc->owner'.
6942 (print_mention_exception_catchpoint): Ditto.
6944 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
6946 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
6948 2009-04-27 Tom Tromey <tromey@redhat.com>
6950 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
6952 2009-04-27 Jerome Guitton <guitton@adacore.com>
6954 * symtab.c (append_exact_match_to_sals): New function, extracted
6955 from expand_line_sal.
6956 (expand_line_sal): Use append_exact_match_to_sals to append exact
6957 matches. If none found, append all best items.
6959 2009-04-27 Jerome Guitton <guitton@adacore.com>
6961 * main.c (captured_main): Move gdbinit lookups after gdb_init.
6963 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
6966 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
6967 (read_func_scope): Call inherit_abstract_dies.
6969 2009-04-25 Eli Zaretskii <eliz@gnu.org>
6971 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
6972 sparc-sol2-nat.c and sparc-sol2-tdep.c.
6974 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
6976 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
6978 ARI change: Use "/* ARI: rule */" pattern.
6979 * utils.c: Update ARI patterns.
6980 * gdb_dirent.h: Likewise.
6982 2009-04-23 Anthony Green <green@moxielogic.com>
6984 * MAINTAINERS: Add moxie target.
6985 * configure.tgt: Add moxie-*-elf target.
6986 * moxie-tdep.c: New file.
6987 * moxie-tdep.h: New file.
6989 2009-04-23 Joel Brobecker <brobecker@adacore.com>
6991 * ada-lang.c: Remove an extra empty line. No code change.
6993 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6995 Fix double free on error inserting the breakpoint instruction.
6996 * breakpoint.c (create_breakpoints): Move the
6997 update_global_location_list call to ...
6998 (break_command_really): ... here together with the second local call
6999 both unified after all the cleanups.
7001 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7002 Tom Tromey <tromey@redhat.com>
7004 * configure, config.in: Regenerate.
7005 * configure.ac: Support for relocatable GDB datadir. Use
7006 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
7007 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
7008 * top.c (init_main): Add "set data-directory".
7009 * defs.h (gdb_datadir): Declare.
7010 * main.c (gdb_datadir): New global.
7011 (captured_main): Initialize gdb_datadir. Use relocate_directory.
7012 (relocate_path): New function.
7013 (relocate_directory): Likewise.
7014 (get_init_files): Use relocate_path.
7015 (README): Mention --with-gdb-datadir.
7017 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7019 * ada-tasks (task_command_1): Call target_find_new_threads.
7021 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7023 * stack.c (do_gdb_disassembly): Print the exception message if an
7024 error was thrown while trying to perform the disassembly.
7026 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
7028 * varobj.c (free_variable): Replace free_current_contents by xfree.
7030 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
7032 * arm-linux-nat.c (fetch_register, store_register): Use
7033 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
7034 * arm-linux-tdep.c (arm_linux_supply_gregset,
7035 arm_linux_collect_gregset): Likewise.
7036 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
7037 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
7039 2009-04-22 Hui Zhu <teawater@gmail.com>
7041 * stack.c (_initialize_stack): Set the default of
7042 disassemble-next-line to off.
7044 2009-04-21 Tom Tromey <tromey@redhat.com>
7046 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
7047 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
7049 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7051 * configure.ac: Add quotes to not lose brackets in help text.
7052 * configure: Rebuild.
7054 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7056 * configure.ac: Don't postprocess Makefile in config.status.
7057 Substitute GDB_NM_FILE. Don't substitute nm_h.
7058 * Makefile.in (GDB_NM_FILE): Substitute.
7059 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
7060 * configure: Regenerate.
7061 * gnulib/Makefile.in: Regenerate.
7063 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7065 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
7066 --with-htmldir): New.
7067 * configure: Regenerate.
7069 2009-04-21 Tom Tromey <tromey@redhat.com>
7071 * configure: Rebuild.
7072 * configure.ac: Use lower case for start of help strings. Clean
7073 up --with-sysroot help.
7075 2009-04-21 Tom Tromey <tromey@redhat.com>
7077 * configure: Rebuild.
7078 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
7079 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
7082 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7084 ARI fix: remove "%p".
7085 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
7086 (ia64_sigtramp_frame_this_id): Ditto.
7087 (ia64_libunwind_frame_this_id): Ditto.
7088 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
7089 * symmisc.c (maintenance_info_psymtabs): Ditto.
7091 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7093 * configure.ac (--with-relocated-sources): New.
7094 * configure, config.in: Regenerate.
7095 * source.c (add_substitute_path_rule): Remove static.
7096 * source.h (add_substitute_path_rule): Declare.
7097 * main.c: Include "source.h".
7098 (captured_main): Add substitution rule if RELOC_SRCDIR.
7100 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7102 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
7104 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7106 * NEWS: Mention MIPS/Linux hardware watchpoint support.
7108 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7110 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
7111 (maint_show_dr, super_close): New variables.
7112 (super_fetch_registers, super_store_registers): Make static.
7113 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
7114 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
7115 (pt_watch_style): Define new enum.
7116 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
7118 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
7120 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
7121 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
7122 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
7123 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
7124 (type_to_irw, fill_mask, try_one_watch)
7125 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
7126 (mips_linux_new_thread, populate_regs_from_watches)
7127 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
7128 (mips_linux_close): New functions.
7129 (_initialize_mips_linux_nat): Register watchpoint functions with
7130 the target_ops. Add show-debug-regs maintenance command.
7132 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7134 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
7136 2009-04-19 Pedro Alves <pedro@codesourcery.com>
7138 * NEWS: Mention gdbserver support for x86 Windows CE.
7140 2009-04-19 Eli Zaretskii <eliz@gnu.org>
7142 * config/djgpp/fnchange.lst: Fix typos.
7144 Set default host and target charsets in the DJGPP port.
7146 * config/djgpp/config.sed (am_cv_langinfo_codeset)
7147 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
7148 in all configure scripts that define ac_cv_env_CPP_value.
7150 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
7153 * config/djgpp/nl_types.h: New file.
7155 * config/djgpp/langinfo.h: New file.
7157 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
7159 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
7161 * Makefile.in (MAKEHTML): Set to makeinfo --html.
7162 (MAKEHTMLFLAGS): Set to empty.
7164 2009-04-18 Eli Zaretskii <eliz@gnu.org>
7166 * NEWS: Mention all new set/show commands added since GDB 6.8 was
7169 * go32-nat.c (go32_sysinfo): Check if the call to
7170 __dpmi_get_capabilities fills the buffer with information, and
7171 don't use the buffer if not.
7173 2009-04-17 Tom Tromey <tromey@redhat.com>
7175 * charset.c (_initialize_charset): Add special case for "646".
7177 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
7179 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
7180 * configure: Regenerate.
7181 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
7182 configure substitutions.
7183 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
7185 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
7187 ARI fix: Do not use %p, replace by call to host_address_to_string
7189 * darwin-nat.c (darwin_xfer_partial): Apply change.
7190 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
7191 * gnu-nat.h (proc_debug): Ditto.
7192 * symmisc.c (maintenance_info_symtabs): Ditto.
7193 (maintenance_info_psymtabs): Ditto.
7194 * windows-nat.c (handle_load_dll): Ditto.
7195 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
7196 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
7198 2009-04-17 Joseph Myers <joseph@codesourcery.com>
7200 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
7201 --enable-64-bit-bfd.
7202 (sparc-*-linux*): Likewise.
7204 2009-04-17 Eli Zaretskii <eliz@gnu.org>
7206 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
7209 2009-04-16 Pedro Alves <pedro@codesourcery.com>
7211 * remote.c (remote_query_attached): Fix pasto in packet_ok result
7214 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7216 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
7217 Revert the previous change. Might not be correct, actually.
7219 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7221 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
7222 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
7223 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
7224 Remove declaration. These are non-existent functions.
7226 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7228 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
7229 Fix a compilation warning on mips-irix due to casting from
7230 a pointer of different size.
7232 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7234 * ada-lang.c (symtab_for_sym): Delete.
7235 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
7237 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7239 * ada-lang.c (extract_string): Delete.
7240 (ada_main_name): Reimplement using target_read_string instead of
7243 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
7245 * m68klinux-nat.c: Remove obsolete comment.
7246 (fetch_register, store_register): Don't call
7247 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
7248 which are always nops here.
7250 2009-04-14 Tom Tromey <tromey@redhat.com>
7252 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
7253 (c_printstr): Likewise.
7254 * charset.c: Include gdb_wait.h.
7255 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
7256 (find_charset_names): Use pexecute. Handle libiconv's output.
7258 (_initialize_charset): Use xstrdup.
7259 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
7261 (INTERMEDIATE_ENCODING): New define.
7262 * configure, config.in: Rebuild.
7263 * configure.ac: Check for btowc.
7265 2009-04-15 Tom Tromey <tromey@redhat.com>
7267 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
7269 2009-04-15 Eli Zaretskii <eliz@gnu.org>
7271 * utils.c (parse_escape): Initialize target_char to pacify GCC.
7273 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
7275 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
7277 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
7279 ARI fix: sprintf rule.
7280 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
7281 * ada-lang.c (add_angle_brackets): Use xstrprintf.
7282 (ada_decode): Replace sprintf by xsnprintf.
7283 (find_old_style_renaming_symbol): Ditto.
7284 (ada_to_fixed_type_1, ada_enum_name): Ditto.
7287 2009-04-14 Joel Brobecker <brobecker@adacore.com>
7289 * target.c (target_mourn_inferior): Call bfd_cache_close_all
7290 after having executed the target mourn_inferior routine.
7292 2009-04-14 Eli Zaretskii <eliz@gnu.org>
7294 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
7297 2009-04-13 David Daney <ddaney@caviumnetworks.com>
7299 * infrun.c (maybe_software_singlestep): New function.
7300 (resume): Call maybe_software_singlestep.
7301 (handle_inferior_event): Same.
7303 2009-04-13 Tom Tromey <tromey@redhat.com>
7305 * python/python-frame.c (frapy_richcompare): Return
7306 Py_NotImplemented, not an error. Handle Py_NE as well.
7308 2009-04-13 Eli Zaretskii <eliz@gnu.org>
7310 * charset.c (EILSEQ): Define if not defined by system headers.
7312 2009-04-11 Eli Zaretskii <eliz@gnu.org>
7314 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
7315 to be consistent with renaming config.intl.in into config_intl.in.
7317 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
7318 consistent with the change from 2008-11-09.
7320 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
7322 * gdbtypes.c: Remove excessive parentheses at the return keywords.
7323 * varobj.c (varobj_invalidate): Fix indentation.
7324 * varobj.c (varobj_invalidate): Fix formatting text width.
7326 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
7328 Implement -exec-jump.
7330 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
7331 * mi/mi-main.c (mi_cmd_exec_jump): New.
7332 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
7334 2009-04-07 Doug Evans <dje@google.com>
7336 * symfile.c (symbol_file_clear): Fix indentation.
7338 2009-04-06 Mark Kettenis <kettenis@gnu.org>
7340 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
7342 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
7344 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
7345 (ppc_linux_auxv_parse): New function.
7346 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
7347 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
7349 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
7351 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
7352 BFD to contents of SPU name note.
7353 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
7354 with "from_tty" argument 1 instead of 0.
7356 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
7359 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
7360 Create the symbol in local scope.
7361 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
7363 2009-04-02 Keith Seitz <keiths@redhat.com>
7365 * stabsread.c (read_member_functions): GCC may emit an extra space
7366 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
7367 whitespace when looking for these functions.
7369 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7371 Change the default value for "set print frame-arguments" to scalars.
7373 * stack.c (print_frame_arguments): Set initial value to "scalars".
7375 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7377 * mips-tdep.c (mips_numeric_register_alieses): New definition.
7378 (mips_gdbarch_init): Add user registers from
7379 mips_numeric_register_aliases.
7381 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7383 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
7385 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7387 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
7388 this is the last one.
7390 2009-04-01 Pedro Alves <pedro@codesourcery.com>
7392 * remote.c (append_resumption): New.
7393 (remote_vcont_resume): Use it.
7395 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7397 * windows-nat.c (+windows_get_ada_task_ptid): New function.
7398 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
7400 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
7401 Keith Seitz <keiths@redhat.com>
7402 Jan Kratochvil <jan.kratochvil@redhat.com>
7405 * Makefile.in (dbxread.o): Update.
7406 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
7407 * dwarf2read.c (GDB_FORM_cached_string): New.
7408 (read_partial_die): Use dwarf2_canonicalize_name.
7409 (dwarf2_linkage_name): Use dwarf2_name.
7410 (dwarf2_canonicalize_name): New.
7411 (dwarf2_name): Use dwarf2_canonicalize_name.
7412 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
7413 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
7414 * symtab.c (lookup_symbol_in_language): Canonicalize input before
7416 * cp-name-parser.y: operator() requires two parameters,
7417 according to libiberty.
7418 * minsyms.c (lookup_minimal_symbol): Canonicalize input
7422 2009-03-31 Joel Brobecker <brobecker@adacore.com>
7424 Provide support for (Ada) task-specific breakpoints.
7426 * ada-lang.h (ada_get_task_number): Add declaration.
7427 (breakpoint_ada_task_match): Delete declaration.
7428 * ada-tasks.c (ada_get_task_number): Make non-static.
7429 * breakpoint.h (struct breakpoint): Add field "task".
7430 * breakpoint.c (print_one_breakpoint_location): Add handling of
7431 task-specific breakpoints.
7432 (create_breakpoint, create_breakpoints, find_condition_and_thread):
7433 New parameter "task".
7434 (break_command_really): Update calls to find_condition_and_thread
7435 and create_breakpoints.
7436 (breakpoint_re_set_one): Update call to find_condition_and_thread.
7439 2009-03-31 Joel Brobecker <brobecker@adacore.com>
7441 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
7443 2009-03-31 Pedro Alves <pedro@codesourcery.com>
7445 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
7446 if the thread's ptid without a thread id field is in the list
7447 before calling thread_change_ptid.
7448 (extended_remote_attach_1): In non-stop mode, do not rely on
7449 querying the current thread, instead, query the thread list, and
7450 select the first thread of the process.
7451 * gdbthread.h (first_thread_of_process): Declare.
7452 * thread.c (first_thread_of_process): Define.
7454 2009-03-30 Stan Shebs <stan@codesourcery.com>
7456 Make tracepoints into a type of breakpoint.
7457 * breakpoint.h (enum bptype): Add bp_tracepoint.
7458 (struct breakpoint): Add fields step_count, pass_count, actions.
7459 (get_tracepoint, get_tracepoint_by_number): Declare.
7460 (all_tracepoints): Declare.
7461 * breakpoint.c: Include tracepoint.h, readline.h.
7462 (ALL_TRACEPOINTS): Move here from tracepoint.c.
7463 (tracepoint_count): Ditto.
7464 (should_be_inserted): GDB does not insert tracepoints itself.
7465 (print_it_typical): Add tracepoint case.
7466 (bpstat_what): Ditto.
7467 (print_one_breakpoint_location): Ditto, and add printing for
7468 pass count, step count, and action list.
7469 (user_settable_breakpoint): Add tracepoint case.
7470 (allocate_bp_location): Ditto.
7471 (set_breakpoint_location_function): Ditto.
7472 (disable_breakpoints_in_shlibs): Ditto.
7474 (break_command_really): Add argument traceflag, use to choose
7475 basic breakpoint type.
7476 (break_command_1): Pass extra argument.
7477 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
7478 (breakpoint_re_set_one): Add tracepoint case.
7479 (disable_command, enable_command): Ditto.
7480 (set_tracepoint_count): Move here from tracepoint.c.
7481 (trace_command): Move here from tracepoint.c and use
7482 break_command_really.
7483 (tracepoints_info): Move here from tracepoint.c and call
7485 (enable_trace_command): Move here from tracepoint.c and call
7487 (disable_trace_command): Move here from tracepoint.c and call
7489 (delete_trace_command): Move here from tracepoint.c and call
7491 (trace_pass_command): Move here from tracepoint.c.
7492 (get_tracepoint_by_number): Ditto.
7493 (tracepoint_save_command): Ditto.
7494 (get_tracepoint): New function.
7495 (all_tracepoints): New function.
7496 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
7497 deprecate "enable trace" and "disable trace" commands.
7498 * tracepoint.h (struct tracepoint): Remove.
7499 (tracepoint_chain): Remove decl.
7500 (deprecated_create_tracepoint_hook): Remove decl.
7501 (deprecated_delete_tracepoint_hook): Remove decl.
7502 (deprecated_modify_tracepoint_hook): Remove decl.
7503 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
7504 (free_actions): Update signature.
7505 (validate_actionline): Update signature.
7506 (end_actions_pseudocommand): Declare.
7507 (while_stepping_pseudocommand): Declare.
7508 * tracepoint.c: Include breakpoint.h.
7509 (tracepoint_chain, tracepoint_count): Remove.
7510 (free_actions, make_cleanup_free_actions): Update signature.
7511 (trace_command, set_raw_tracepoint): Remove.
7512 (trace_mention): Remove.
7513 (tracepoints_info): Remove.
7514 (tracepoint_operation, map_args_over_tracepoints): Remove.
7515 (get_tracepoint_by_number): Remove.
7516 (enable_trace_command, disable_trace_command): Remove.
7517 (delete_trace_command, trace_pass_command): Remove.
7518 (trace_actions_command, read_actions): Update signature.
7519 (validate_actionline): Update signature, use bp loc.
7520 (encode_actions): Ditto.
7521 (download_tracepoint): New function, body of trace_start_command.
7522 (trace_start_command): Call it, use all_tracepoints.
7523 (tracepoint_save_command): Remove.
7524 (tracepoint_dump_command): Use get_tracepoint.
7525 (end_actions_pseudocommand): Make globally visible.
7526 (while_stepping_pseudocommand): Ditto.
7527 (_initialize_tracepoint): Move command definitions to breakpoint.c.
7529 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
7531 Expose frames to Python.
7532 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
7533 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
7534 (python-frame.o): New target.
7535 * python/python-frame.c: New file.
7536 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
7537 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
7538 gdbpy_initialize_frames): New prototypes.
7539 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
7540 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
7542 * stack.c (find_frame_funname): New function, factored out of
7544 (print_frame): Call find_frame_funname.
7545 * stack.h (find_frame_funname): Add prototype.
7547 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
7549 Remove unused value_object attribute `owned_by_gdb'.
7550 * python/python-value.c (value_object): Remove owned_by_gdb
7552 (valpy_dealloc): Remove reference to self->owned_by_gdb.
7553 (valpy_new): Likewise.
7554 (value_to_value_object): Likewise.
7556 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
7558 Change gdb.Value.address from a method to an attribute.
7559 * python/python-value.c (value_object): Add `address' element.
7560 (valpy_dealloc): Decrement reference to self->address if set.
7561 (valpy_new): Initialize val_obj->address.
7562 (valpy_address): Rename to ...
7563 (valpy_get_address): ... this. Change signature from method to
7564 attribute. Update self->address if not set.
7565 (value_to_value_object): Initialize val_obj->address.
7566 (value_object_getset): Add `address' element.
7567 (value_object_methods): Remove `address' element.
7569 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
7571 * observer.sh: Set LANG/LC_ALL to C, not c.
7573 2009-03-28 Kevin Buettner <kevinb@redhat.com>
7575 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
7578 2009-03-28 Pedro Alves <pedro@codesourcery.com>
7580 * remote.c (remote_stop_ns): If multi-process extensions are off,
7581 and GDB is requesting the whole process to stop, sent "vCont;t",
7584 2009-03-28 Pedro Alves <pedro@codesourcery.com>
7586 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
7589 2009-03-27 Eli Zaretskii <eliz@gnu.org>
7591 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
7593 2009-03-26 Doug Evans <dje@google.com>
7595 * thread.c (do_restore_current_thread_cleanup): Redo test for
7596 whether to restore old->inferior_ptid.
7598 2009-03-26 Tom Tromey <tromey@redhat.com>
7600 * breakpoint.c (resolve_sal_pc): Preserve original line number
7601 when skipping prologue.
7603 2009-03-26 Doug Evans <dje@google.com>
7605 * thread.c (inferior_thread) Remove "extern" in definition.
7607 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
7609 Add gdb.Value.is_optimized_out attribute.
7610 * python/python-value.c (valpy_get_is_optimized_out): New
7612 (value_object_getset): New variable.
7613 (value_object_type): Initialize tp_getset element.
7615 2009-03-26 Joel Brobecker <brobecker@adacore.com>
7617 Recognize missing DW_AT_location as <value optimized out>.
7619 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
7620 Call add_symbol_to_list.
7622 2009-03-25 Tom Tromey <tromey@redhat.com>
7624 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
7625 * stack.c (print_this_frame_argument_p): Use check_typedef.
7627 2009-03-25 Tom Tromey <tromey@redhat.com>
7629 * configure: Rebuild.
7630 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
7631 Rearrange flags setting. Add comments.
7633 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7635 * config/i386/nm-i386.h: Remove code within
7636 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
7637 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
7639 * config/i386/nm-cygwin64.h: Ditto.
7640 * config/i386/nm-fbsd.h: Ditto.
7641 * config/i386/nm-go32.h: Ditto.
7642 * config/i386/nm-linux.h: Ditto.
7643 * config/i386/nm-linux64.h: Ditto.
7645 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7647 ARI fix: "xasprintf" rule.
7648 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
7650 2009-03-25 Pedro Alves <pedro@codesourcery.com>
7652 * remote.c (remote_start_remote): In non-stop mode, call
7653 init_wait_for_inferior before adding threads and inferiors.
7655 2009-03-25 Joel Brobecker <brobecker@adacore.com>
7657 * breakpoint.c (breakpoint_thread_match): Split a large condition
7658 into several smaller conditions. No behavior change.
7660 2009-03-25 Pedro Alves <pedro@codesourcery.com>
7662 * infrun.c (infrun_thread_thread_exit): New.
7663 (_initialize_infrun): Attach it to the thread_exit observer.
7664 * thread.c (delete_thread_1): Always call the observer, passing it
7666 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
7667 SILENT, return immediately.
7669 2009-03-25 Pedro Alves <pedro@codesourcery.com>
7671 * infrun.c (normal_stop): Use has_stack_frames instead of
7673 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
7674 when there is no thread selected.
7675 (mi_cmd_execute): Don't special case commands that can run without
7676 a valid selected thread.
7677 * top.c (execute_command): Don't special case commands that can
7678 run without a valid selected thread. Use has_stack_frames.
7679 * infcmd.c (ensure_valid_thread): New.
7680 (continue_1, step_1, jump_command, signal_command): Use it.
7681 (detach_command): Error out if there's no selected thread/inferior.
7682 * thread.c (print_thread_info): Allow having no thread selected.
7683 (switch_to_thread): Don't read the PC if there is no current thread.
7684 (do_restore_current_thread_cleanup): Don't record the current
7685 frame if there is no current thread.
7686 (make_cleanup_restore_current_thread): Don't read frame info if
7687 there is no selected thread.
7688 (_initialize_thread): Don't mark commands as
7689 "no_selected_thread_ok".
7690 * frame.c (get_current_frame): Error out if there is no valid
7692 (has_stack_frames): Return false if there is no valid
7694 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
7695 "no_selected_thread_ok".
7696 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
7697 (get_cmd_no_selected_thread_ok): Delete.
7698 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
7699 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
7701 * stack.c (get_selected_block): Use has_stack_frames.
7703 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
7705 Fix size of FPSCR in Power 7 processors.
7706 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
7707 (PPC_FEATURE_HAS_DFP): New #define.
7708 (ppc_linux_read_description): Check for DFP feature instead of
7709 ISA 2.05 to decide on size of the FPSCR.
7711 2009-03-25 Kevin Buettner <kevinb@redhat.com>
7713 * mn10300-tdep.c (trad-frame.h): Don't include.
7714 (prologue-value.h): Include.
7715 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
7716 (struct mn10300_prologue): Define.
7717 (push_reg, translate_rreg, check_for_saved): New functions.
7718 (mn10300_analyze_prologue): Rewrite, using prologue-value
7719 machinery. Handle more instructions than before. Permit
7720 instructions to occur in any order.
7721 (mn10300_skip_prologue): Find the extents of the function
7722 in question; mn10300_analyze_prologue no longer does this.
7723 (mn10300_analyze_frame_prologue): New function.
7724 (mn10300_frame_base): New function.
7725 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
7727 (mn10300_frame_prev_register): Likewise.
7728 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
7729 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
7731 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
7733 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7735 Fix completer problem for filename completion on the first try.
7737 * gdb/completer.h (gdb_completion_word_break_characters): New function.
7738 * gdb/completer.c: Include gdb_assert.h.
7739 (complete_line_internal_reason): New enum.
7740 (complete_line_internal): Change last argument type to
7741 complete_line_internal_reason.
7742 Modify function to handle the different complete_line_internal_reason
7744 (complete_line): Adapt to change in complete_line_internal.
7745 (command_completer): Ditto.
7746 (gdb_completion_word_break_characters): Implement new function.
7747 * top.c (init_main): Set rl_completion_word_break_hook to
7748 gdb_completion_word_break_characters.
7751 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7753 ARI fix: "strlen d_name" rule.
7754 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
7757 2009-03-24 Tom Tromey <tromey@redhat.com>
7758 Pedro Alves <pedro@codesourcery.com>
7760 * configure, config.in: Rebuild.
7761 * configure.ac: Check for libiconvlist.
7762 * charset.c: Check HAVE_LIBICONVLIST.
7763 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
7764 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
7765 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
7767 (INTERNAL_CFLAGS_BASE): Update.
7768 (INTERNAL_LDFLAGS): Update.
7771 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
7773 * configure.ac: Initialize the variable $PREFER_CURSES.
7774 * configure: Regenerated.
7776 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
7778 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
7779 * configure: Regenerated.
7781 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
7783 ARI fix: "strerror" rule.
7784 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
7785 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
7787 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7789 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
7790 before looking up the fields inside our struct type.
7792 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7794 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
7795 trying to resolve the type qualification.
7797 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7799 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
7800 we try to apply the attribute on the real type, rather than
7801 its associated typedef.
7803 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7805 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
7806 to make sure we try to get the modulus of the actual type, not the
7809 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7811 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
7812 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
7813 to get the real type, not the associated typedef.
7815 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7817 * ada-lang.c (ada_get_field_index): Add handling of the case
7818 when TYPE is a typedef of a struct.
7820 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7822 Add gdb_usleep as a portable version of usleep based on gdb_select.
7823 * gdb_usleep.h, gdb_usleep.c: New files.
7824 * Makefile.in (SFILES): Add gdb_usleep.c.
7825 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
7826 (COMMON_OBS): Add gdb_usleep.o.
7827 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
7828 by call to gdb_usleep.
7830 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7832 * buildsym.c (end_symtab): If we ignore the subfiles, then
7833 unlink the associated symtabs if they were already allocated.
7835 2009-03-23 Jerome Guitton <guitton@adacore.com>
7837 Provide a way to force building of GDB with libcurses.
7838 * configure.ac: Add --with-curses.
7839 * configure: Regenerated.
7841 2009-03-23 Tom Tromey <tromey@redhat.com>
7843 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
7846 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
7848 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
7849 solib_contains_address_p instead of searching.
7851 2009-03-23 Tom Tromey <tromey@redhat.com>
7853 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
7854 (iconv): Make 'inbuf' argument const.
7855 (convert_between_encodings): Use ICONV_CONST.
7856 (wchar_iterate): Likewise.
7858 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
7860 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
7861 dynamically loaded function.
7862 (LookupPrivilegeValueA): Ditto.
7863 (OpenProcessToken): Ditto.
7864 (AdjustTokenPrivileges): Rename and define placeholder for address of
7865 dynamically loaded function.
7866 (LookupPrivilegeValueA): Ditto.
7867 (OpenProcessToken): Ditto.
7868 (set_process_privilege): Remove check for loaded functions.
7869 (bad_OpenProcessToken): Define.
7870 (_initialize_loadable): Load token functions from advapi here, setting
7871 OpenProcessToken function to a dummy static function which always return
7872 error if OS doesn't support this functionality.
7874 2009-03-22 Nicolas Roche <roche@adacore.com>
7875 Christopher Faylor <me+cygwin@cgf.cx>
7877 * win32-nat.c (ctrl_c_handler): New function.
7878 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
7879 is run in a separate console.
7881 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
7883 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
7884 for dynamically loaded function.
7885 (DebugBreakProcess): Ditto.
7886 (DebugSetProcessKillOnExit): Ditto.
7887 (EnumProcessModules): Ditto.
7888 (GetModuleFileNameExA): Ditto.
7889 (GetModuleInformation): Ditto.
7890 (DebugActiveProcessStop): Rename and define placeholder for address of
7891 dynamically loaded function.
7892 (DebugBreakProcess): Ditto.
7893 (DebugSetProcessKillOnExit): Ditto.
7894 (EnumProcessModules): Ditto.
7895 (GetModuleFileNameExA): Ditto.
7896 (GetModuleInformation): Ditto.
7897 (psapi_loaded): Delete.
7898 (get_module_name): Don't check psapi_loaded, just rely on the fact that
7899 dynamically loaded functions will return failure if they weren't
7901 (has_detach_ability): Delete.
7902 (windows_attach): Remove call to has_detach_ability (). Just rely on
7903 functions being callable.
7904 (bad_DebugActiveProcessStop): Define.
7905 (bad_DebugBreakProcess): Ditto.
7906 (bad_DebugSetProcessKillOnExit): Ditto.
7907 (bad_EnumProcessModules): Ditto.
7908 (bad_GetModuleFileNameExA): Ditto.
7909 (bad_GetModuleInformation): Ditto.
7910 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
7911 dynamic storage here, setting nonexistent functions to dummy static
7912 functions which always return error.
7914 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7916 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
7917 to the about_to_proceed observer notification.
7918 (mi_about_to_proceed): New.
7919 (mi_on_resume): Only output ^running and the prompt here if the
7920 target was proceeded.
7921 * breakpoint.c (breakpoint_proceeded): New static.
7922 (breakpoint_about_to_proceed): New.
7923 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
7924 the about_to_proceed observer notification.
7925 * inferior.h (breakpoint_proceeded): Delete declaration.
7926 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
7927 Notify the about_to_proceed observers.
7928 (struct inferior_status): Delete breakpoint_proceeded member.
7929 (save_inferior_status): Don't save it.
7930 (restore_inferior_status): Don't restore it.
7931 * mi-main.h (mi_proceeded): Declare.
7932 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
7935 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7937 * gdbthread.h (struct thread_info): Add in_infcall member.
7938 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
7939 Remove reverences to suppress_resume_observer. Refresh
7940 `call_thread' after returning from `proceed'.
7941 * infcmd.c (suppress_resume_observer): Delete.
7942 * inferior.h (suppress_resume_observer): Delete declaration.
7943 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
7945 * thread.c (set_running): Remove references to
7946 suppress_resume_observer.
7947 * infrun.c (struct inferior_status): Add in_infcall member.
7948 (save_inferior_status): Save it.
7949 (restore_inferior_status): Restore it.
7951 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7953 * infcall.c (run_inferior_call): Remove references to
7954 suppress_stop_observer.
7955 * infcmd.c (suppress_stop_observer): Delete.
7956 (finish_command_continuation): Remove NOTE. Don't clear
7957 suppress_stop_observer anymore.
7958 (finish_command_continuation_free_arg): Likewise.
7959 (finish_forward): Remove references to suppress_stop_observer.
7960 Call normal_stop observer if we haven't already.
7961 * inferior.h (suppress_stop_observer): Delete.
7962 * infrun.c (normal_stop): When deciding to suppress the
7963 normal_stop observer, check for proceed_to_finish instead of
7964 suppress_stop_observer.
7966 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7968 * symfile.c (symfile_relocate_debug_section): Remove check for
7971 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7972 Jim Blandy <jimb@red-bean.com>
7973 Thiago Jung Bauermann <bauerman@br.ibm.com>
7974 Tom Tromey <tromey@redhat.com>
7976 Miscellaneous fixes to the Python code.
7977 * python/python-cmd.c (cmdpy_init): Accept keyword
7979 * python/python-value.c (valpy_string): Accept keyword
7981 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
7982 Do not call value_to_value_object on NULL RES_VAL.
7983 (value_object_methods): Change `string' entry to also accept
7985 (convert_value_from_python): Return a copy of the value if obj is
7987 (value_object_methods): Mark the `string' method as accepting
7988 keywords, and show method "prototype" in the doc string.
7989 * python/python.c (get_parameter): Don't return inside a
7992 2009-03-20 Tom Tromey <tromey@redhat.com>
7994 Add support for convenience functions in Python.
7995 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
7996 (SUBDIR_PYTHON_SRCS): Add python-function.c.
7997 (python-function.o): New target.
7998 * eval.c: Include "python/python.h" and <ctype.h>.
7999 (evaluate_subexp_standard): Handle values of type
8000 TYPE_CODE_INTERNAL_FUNCTION.
8001 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
8002 * parse.c (write_exp_string): Remove duplicate word in comment.
8003 * python/python-function.c: New file.
8004 * python/python-internal.h (gdbpy_initialize_functions): Add
8006 * python/python.c (_initialize_python): Call
8007 gdbpy_initialize_functions.
8008 * valprint.c (value_check_printable): Handle values of type
8009 TYPE_CODE_INTERNAL_FUNCTION.
8010 * value.c: Include "cli/cli-decode.h".
8011 (internal_function): New struct.
8012 (functionlist, internal_fn_type): New static variables.
8013 (lookup_only_internalvar,
8014 lookup_internalvar): Add const qualifier to name argument.
8015 (create_internalvar): Likewise. Initialize new field.
8016 (set_internal_var): Fix typo in comment. Don't allow assignment
8017 to canonical variable.
8018 (value_create_internal_function, value_internal_function_name,
8019 call_internal_function, function_command, function_destroyer,
8020 add_internal_function): New functions.
8021 (_initialize_values): Create `function' placeholder command.
8022 Initialize internal_fn_type.
8023 * value.h (lookup_only_internalvar, create_internalvar,
8024 lookup_internalvar): Add const qualifier to name argument.
8025 (internal_function_fn, add_internal_function, call_internal_function,
8026 value_internal_function_name): Add prototypes.
8027 (struct internalvar) <canonical>: New field.
8029 2009-03-20 Tom Tromey <tromey@redhat.com>
8031 * c-lang.c (evaluate_subexp_c): Call check_typedef.
8033 2009-03-20 Tom Tromey <tromey@redhat.com>
8034 Julian Brown <julian@codesourcery.com>
8036 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
8037 PR i18n/9401, PR exp/9613:
8039 * value.h (value_typed_string): Declare.
8040 (val_print_string): Update.
8041 * valprint.h (print_char_chars): Update.
8042 * valprint.c (print_char_chars): Add type argument. Update.
8043 (val_print_string): Likewise.
8044 * valops.c (value_typed_string): New function.
8045 * utils.c (host_char_to_target): New function.
8046 (parse_escape): Use host_char_to_target, host_hex_value. Update.
8048 (no_control_char_error): Remove.
8049 * typeprint.c (print_type_scalar): Update.
8050 * scm-valprint.c (scm_scmval_print): Update.
8051 * scm-lang.h (scm_printchar, scm_printstr): Update.
8052 * scm-lang.c (scm_printchar): Add type argument.
8053 (scm_printstr): Likewise.
8054 * printcmd.c (print_formatted): Update.
8055 (print_scalar_formatted): Update.
8056 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
8057 Handle '%lc' and '%ls'.
8058 * parser-defs.h (struct typed_stoken): New type.
8059 (struct stoken_vector): Likewise.
8060 (write_exp_string_vector): Declare.
8061 * parse.c (write_exp_string_vector): New function.
8062 * p-valprint.c (pascal_val_print): Update.
8063 * p-lang.h (is_pascal_string_type, pascal_printchar,
8064 pascal_printstr): Update.
8065 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
8066 Add 'char_type' argument.
8067 (pascal_emit_char): Add type argument.
8068 (pascal_printchar): Likewise.
8069 (pascal_printstr): Likewise.
8070 * objc-lang.c (objc_emit_char): Add type argument.
8071 (objc_printchar): Likewise.
8072 (objc_printstr): Likewise.
8073 * macroexp.c (get_character_constant): Handle unicode characters.
8075 (get_string_literal): Handle unicode strings. Use
8077 * m2-valprint.c (print_unpacked_pointer): Update.
8078 (m2_print_array_contents): Update.
8079 (m2_val_print): Update.
8080 * m2-lang.c (m2_emit_char): Add type argument.
8081 (m2_printchar): Likewise.
8082 (m2_printstr): Likewise.
8083 * language.h (struct language_defn) <la_printchar>: Add type
8085 <la_printstr, la_emitchar>: Likewise.
8086 (LA_PRINT_CHAR): Likewise.
8087 (LA_PRINT_STRING): Likewise.
8088 (LA_EMIT_CHAR): Likewise.
8089 * language.c (unk_lang_emit_char): Add type argument.
8090 (unk_lang_printchar): Likewise.
8091 (unk_lang_printstr): Likewise.
8092 * jv-valprint.c (java_val_print): Update.
8093 * jv-lang.c (java_emit_char): Add type argument.
8094 * f-valprint.c (f_val_print): Update.
8095 * f-lang.c (f_emit_char): Add type argument.
8096 (f_printchar): Likewise.
8097 (f_printstr): Likewise.
8098 * expprint.c (print_subexp_standard): Update.
8099 * charset.h (target_wide_charset): Declare.
8100 (c_target_char_has_backslash_escape, c_parse_backslash,
8101 host_char_print_literally, host_char_to_target,
8102 target_char_to_host, target_char_to_control_char): Remove.
8103 (enum transliterations): New type.
8104 (convert_between_encodings): Declare.
8105 (HOST_ESCAPE_CHAR): New define.
8106 (host_letter_to_control_character, host_hex_value): Declare.
8107 (enum wchar_iterate_result): New enum.
8108 (struct wchar_iterator): Declare.
8109 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
8110 wchar_push_back): Declare.
8111 * charset-list.h: New file.
8112 * c-valprint.c (textual_name): New function.
8113 (textual_element_type): Handle wide character types.
8114 (c_val_print): Pass original type to textual_element_type. Handle
8115 wide character types.
8116 (c_value_print): Use textual_element_type. Pass original type of
8118 * c-lang.h (enum c_string_type): New type.
8119 (c_printchar, c_printstr): Update.
8120 * c-lang.c (classify_type): New function.
8121 (print_wchar): Likewise.
8122 (c_emit_char): Add type argument. Handle wide characters.
8123 (c_printchar): Likewise.
8124 (c_printstr): Add type argument. Handle wide and multibyte
8126 (convert_ucn): New function.
8127 (emit_numeric_character): Likewise.
8128 (convert_octal): Likewise.
8129 (convert_hex): Likewise.
8130 (ADVANCE): New macro.
8131 (convert_escape): New function.
8132 (parse_one_string): Likewise.
8133 (evaluate_subexp_c): Likewise.
8134 (exp_descriptor_c): New global.
8135 (c_language_defn): Use exp_descriptor_c.
8136 (cplus_language_defn): Likewise.
8137 (asm_language_defn): Likewise.
8138 (minimal_language_defn): Likewise.
8139 (charset_for_string_type): New function.
8140 * c-exp.y (%union): Add 'svec' and 'tsval'.
8142 (exp): Add CHAR production.
8143 (string_exp): Rewrite.
8144 (exp) <string_exp>: Rewrite.
8145 (tempbuf): Now global.
8146 (tempbuf_init): New global.
8147 (parse_string_or_char): New function.
8148 (yylex) <tempbuf>: Now global.
8149 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
8151 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
8152 (c_parse_escape): New function.
8153 * auxv.c (fprint_target_auxv): Update.
8154 * ada-valprint.c (ada_emit_char): Add type argument.
8155 (ada_printchar): Likewise.
8156 (ada_print_scalar): Update.
8157 (printstr): Add type argument. Update calls to ada_emit_char.
8158 (ada_printstr): Add type argument.
8159 (ada_val_print_array): Update.
8160 (ada_val_print_1): Likewise.
8161 * ada-lang.c (emit_char): Add type argument.
8162 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
8164 * gdb_locale.h: Include langinfo.h.
8165 * charset.c (_initialize_charset): Set default host charset from
8166 the locale. Don't register charsets. Add target-wide-charset
8167 commands. Call find_charset_names.
8168 (struct charset, struct translation): Remove.
8169 (GDB_DEFAULT_HOST_CHARSET): Remove.
8170 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
8171 (target_wide_charset_name): New global.
8172 (show_host_charset_name): Handle "auto".
8173 (show_target_wide_charset_name): New function.
8174 (host_charset_enum, target_charset_enum): Remove.
8175 (charset_enum): New global.
8176 (all_charsets, register_charset, lookup_charset, all_translations,
8177 register_translation, lookup_translation): Remove.
8178 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
8179 (iso_8859_print_literally, iso_8859_to_control,
8180 iso_8859_family_charset): Remove.
8181 (ebcdic_print_literally, ebcdic_to_control,
8182 ebcdic_family_charset): Remove.
8183 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
8184 register_iconv_charsets): Remove.
8185 (target_wide_charset_be_name, target_wide_charset_le_name): New
8187 (identity_either_char_to_other): Remove.
8188 (set_be_le_names, validate): New functions.
8189 (backslashable, backslashed, represented): Remove.
8190 (default_c_target_char_has_backslash_escape): Remove.
8191 (default_c_parse_backslash, iconv_convert): Remove.
8192 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
8193 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
8194 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
8195 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
8196 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
8197 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
8198 (table_convert_char, table_translation, simple_table_translation):
8200 (current_host_charset, current_target_charset,
8201 c_target_char_has_backslash_escape_func,
8202 c_target_char_has_backslash_escape_baton): Remove.
8203 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
8204 (host_char_to_target_func, host_char_to_target_baton): Remove.
8205 (target_char_to_host_func, target_char_to_host_baton): Remove.
8206 (cached_iconv_host_to_target, cached_iconv_target_to_host):
8208 (lookup_charset_or_error, check_valid_host_charset): Remove.
8209 (set_host_and_target_charsets): Remove.
8210 (set_host_charset, set_target_charset): Remove.
8211 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
8212 (set_target_wide_charset_sfunc): New function.
8213 (show_charset): Print target wide character set.
8214 (host_charset, target_charset): Rewrite.
8215 (target_wide_charset): New function.
8216 (c_target_char_has_backslash_escape): Remove.
8217 (c_parse_backslash): Remove.
8218 (host_letter_to_control_character): New function.
8219 (host_char_print_literally): Remove.
8220 (host_hex_value): New function.
8221 (target_char_to_control_char): Remove.
8222 (cleanup_iconv): New function.
8223 (convert_between_encodings): New function.
8224 (target_char_to_host): Remove.
8225 (struct wchar_iterator): Define.
8226 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
8227 wchar_push_back): New functions.
8228 (do_cleanup_iterator): New function.
8229 (char_ptr): New typedef.
8230 (charsets): New global.
8231 (add_one, find_charset_names): New functions.
8232 (default_charset_names): New global.
8233 (auto_host_charset_name): Likewise.
8234 * aclocal.m4, config.in, configure: Rebuild.
8235 * configure.ac: Call AM_LANGINFO_CODESET.
8236 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
8237 (AM_ICONV): Invoke earlier.
8238 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
8239 LIBICONV_LIBDIR. Check for libiconv in build tree.
8240 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
8241 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
8242 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
8243 * gdb_obstack.h (obstack_grow_wstr): New define.
8244 * gdb_wchar.h: New file.
8245 * defs.h: Include it.
8247 2009-03-20 Tom Tromey <tromey@redhat.com>
8248 Jan Kratochvil <jan.kratochvil@redhat.com>
8250 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
8251 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
8253 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
8255 * ada-typeprint.c (print_array_type): Do the NULL check
8258 2009-03-19 Tom Tromey <tromey@redhat.com>
8260 * utils.c (do_obstack_free): New function.
8261 (make_cleanup_obstack_free): Likewise.
8262 * defs.h (make_cleanup_obstack_free): Declare.
8264 2009-03-18 Doug Evans <dje@google.com>
8266 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
8267 int, not a long long.
8268 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
8270 * expprint.c (dump_raw_expression): Print note if non-NULL.
8272 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
8275 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
8277 * Makefile.in: Update license to GPLv3.
8278 * ada-exp.y: Update license to GPLv3.
8279 * ada-lex.l: Update license to GPLv3.
8280 * c-exp.y: Update license to GPLv3.
8281 * cp-name-parser.y: Update license to GPLv3.
8282 * darwin-nat-info.c: Update license to GPLv3.
8283 * f-exp.y: Update license to GPLv3.
8284 * gdb_thread_db.h: Update license to GPLv3.
8285 * hppanbsd-nat.c: Update license to GPLv3.
8286 * hppanbsd-tdep.c: Update license to GPLv3.
8287 * hppaobsd-tdep.c: Update license to GPLv3.
8288 * jv-exp.y: Update license to GPLv3.
8289 * m2-exp.y: Update license to GPLv3.
8290 * objc-exp.y: Update license to GPLv3.
8291 * p-exp.y: Update license to GPLv3.
8292 * reply_mig_hack.awk: Update license to GPLv3.
8293 * reverse.c: Update license to GPLv3.
8294 * xtensa-xtregs.c: Update license to GPLv3.
8296 2009-03-18 Pedro Alves <pedro@codesourcery.com>
8298 * remote.c (remote_close): Don't call generic_mourn_inferior.
8299 (remote_mourn_1): Call generic_mourn_inferior after closing the
8302 2009-03-18 Pedro Alves <pedro@codesourcery.com>
8304 * remote.c (remote_start_remote): Add missing call to
8305 init_wait_for_inferior in non-stop mode.
8307 2009-03-18 Pedro Alves <pedro@codesourcery.com>
8309 * breakpoint.c (bpstat_should_step): Only consider software
8310 watchpoints that have a location.
8312 2009-03-17 Joel Brobecker <brobecker@adacore.com>
8314 Add a target_ops parameter to the to_kill method in struct target_ops.
8316 * target.h (struct target_ops): Add a "target_ops *" parameter to
8318 (target_kill): Remove macro. Add declaration.
8319 * target.c (debug_to_kill): Delete, no longer necessary.
8320 (target_kill): New function.
8321 (update_current_target): Stop inheriting the to_kill method.
8322 Do not de_fault it to no_process either.
8323 (setup_target_debug): Do not set current_target.to_kill.
8324 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
8325 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
8326 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
8329 2009-03-17 Doug Evans <dje@google.com>
8331 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
8332 glibc 2.3.2 and earlier.
8334 2009-03-17 Joel Brobecker <brobecker@adacore.com>
8336 * frame.c (get_prev_frame_1): Do not perform the inner_frame
8337 sanity check if this_frame is not NORMAL.
8338 (frame_id_inner): Update the description of this function.
8340 2009-03-17 Hui Zhu <teawater@gmail.com>
8342 * stack.c: Change the introduce of "disassemble-next-line".
8344 2009-03-17 Pedro Alves <pedro@codesourcery.com>
8346 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
8349 2009-03-17 Hui Zhu <teawater@gmail.com>
8351 * stack.c: Include valprint.h.
8352 (disassemble_next_line): New enum.
8353 (show_disassemble_next_line): New function. Show the current
8354 value of disassemble-next-line.
8355 (gdb_disassembly_stub_args): New struct for argument passing
8356 between function do_gdb_disassembly and function
8357 gdb_disassembly_stub.
8358 (gdb_disassembly_stub): New function. Helper for
8360 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
8361 the exception from the gdb_disassembly because it will be
8362 broken by filter sometime.
8363 (print_frame_info): If disassemble-next-line is set to auto
8364 or on and doesn't have the line debug messages for $pc,
8365 output the next instruction.
8366 If disassemble-next-line is set to on and there is line debug
8367 messages, output assembly codes for next line.
8368 (_initialize_stack): Make the "set disassemble-next-line"
8369 command an auto-boolean command. Change its class to
8370 class_stack. Place it in the top level set list. Extend help
8371 to describe the auto mode.
8373 2009-03-17 Pedro Alves <pedro@codesourcery.com>
8375 * infrun.c (normal_stop): Don't overwrite old_chain.
8377 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8379 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
8380 which is undefined, by call to regcache_invalidate, which should
8381 do what the original author wanted to do.
8383 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8385 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
8386 (mips_create_inferior): Likewise.
8388 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8390 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
8392 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8394 * darwin-nat.c (darwin_resume): Fix a compiler warning when
8395 building on x86_64-darwin.
8397 2009-03-16 Tristan Gingold <gingold@adacore.com>
8399 * configure.tgt: Add handling for x86_64-darwin.
8401 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
8403 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
8405 2009-03-15 Joel Brobecker <brobecker@adacore.com>
8407 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
8408 Use the ops parameter to get to the target beneath, rather than
8409 using the current_target global. Using the current_target global
8410 was an unintended accident.
8412 2009-03-15 Joel Brobecker <brobecker@adacore.com>
8414 Fix an error happening while loading symbols from a core file
8417 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
8418 to detect whether we're debugging a core file or not.
8420 2009-03-15 Joel Brobecker <brobecker@adacore.com>
8422 Modernize the aix-thread later by getting rid of the base_target
8423 global. This brings back to life the AIX port which was otherwise
8424 crashing all the time.
8426 * aix-thread.c (base_target): Delete.
8427 (pd_enable): Do not set base_target.
8428 (aix_thread_attach): Use find_target_beneath instead of base_target.
8429 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
8430 (aix_thread_fetch_registers, aix_thread_store_registers),
8431 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
8432 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
8433 (aix_thread_kill): Delete. Does not seem necessary.
8434 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
8436 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8438 * stack.c (return_command <retval_exp>): New variables retval_expr
8439 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
8440 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
8441 if RETURN_TYPE is NULL.
8443 2009-03-14 Pedro Alves <pedro@codesourcery.com>
8445 * remote.c (PACKET_qAttached): New.
8446 (remote_query_attached): New.
8447 (remote_add_inferior): Add new `attached' argument. Handle it.
8448 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
8449 -1 to remote_add_inferior in new parameter.
8450 (extended_remote_attach_1): Adjust to pass 1 to
8451 remote_add_inferior in the new parameter.
8452 (extended_remote_create_inferior_1): Adjust to pass 0 to
8453 remote_add_inferior in the new parameter.
8454 (_initialize_remote): Add "set/show remote query-attached-packet"
8457 2009-03-13 Tom Tromey <tromey@redhat.com>
8459 * symtab.c (lookup_symbol_in_language): Use a cleanup.
8461 2009-03-13 Doug Evans <dje@google.com>
8463 * exceptions.h: Clean up some comments on catch_exceptions usage.
8464 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
8467 2009-02-17 Joel Brobecker <brobecker@adacore.com>
8469 The following patch helps getting rid of a warning inside solib-som.c.
8471 * source.c (source_full_path_of): Constify parameter filename.
8472 * defs.h (source_full_path_of): Update declaration accordingly.
8474 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8476 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
8477 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
8478 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
8480 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8482 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
8483 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
8485 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8487 * ada-tasks.c (ada_task_is_alive): Move up and make static.
8488 * ada-lang.h (ada_task_is_alive): Remove declaration.
8490 2009-03-12 Jerome Guitton <guitton@adacore.com>
8492 * ada-lang.c (ada_delta): Change the type of numerators and
8493 denominators to DOUBLEST, as they may not fit into a long.
8494 (scaling_factor): Ditto.
8496 2009-03-12 Jerome Guitton <guitton@adacore.com>
8498 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
8500 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8502 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
8503 types, if we are unable to determine the actual symbol type
8504 from its tag, then use the static approximation instead.
8506 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8508 Fix crash printing packed record with packed array.
8510 * ada-lang.c (ada_modulus_from_name): New function.
8511 (ada_modulus): In the case where the type length is bigger than
8512 the size of the type used to hold the bounds, try determining
8513 the modulus from the type name.
8514 (ada_value_primitive_packed_val): Fix bug in the computation of
8515 ntarg causing an out-of-buffer invalid access.
8517 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8519 Fix segfault when printing short_integer'last.
8521 * ada-lang.c (ada_find_any_type): Search in the primitive types
8522 if a symbol could not be found.
8524 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8526 * ada-tasks.c (task_states,long_task_states): Add new states
8527 Activating and Acceptor_Delay_Sleep. Update the description
8528 of state Acceptor_Sleep.
8530 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
8532 Fix a build failure on Darwin following some changes in
8533 the profile of some target_ops methods.
8535 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
8537 (darwin_stop_inferior, darwin_detach): Likewise.
8539 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
8541 Include token in ^running notification for CLI commands.
8543 * mi/mi-main.c (mi_execute_command): Set current_token here.
8544 (mi_cmd_execute): Do not set current_token here.
8546 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
8550 * mi/mi-main.c (mi_print_timing_maybe): New.
8551 (captured_mi_execute_command): Simplify. Output timings to
8553 (mi_execute_async_cli_command): Do not print timings.
8554 * mi/mi-main.h (mi_print_timing_maybe): Declare.
8555 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
8557 2009-03-12 Jerome Guitton <guitton@adacore.com>
8559 * xcoffread.c (process_linenos): Check if the line in the
8560 include table refers to the main source file and, if so,
8561 add them to the main subfile.
8563 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8565 Fix a build failure on AIX introduced after a change in the profile
8566 of some of the "methods" in the target_ops structure.
8567 * aix-thread.c: Add missing target_ops parameter throughout.
8569 Implement Ada task switching on AIX.
8570 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
8571 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
8573 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
8575 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
8576 value_mark and value_free_to_mark.
8577 * objfiles.c (free_objfile): Call objfile_free_data before
8580 2009-03-10 Hui Zhu <teawater@gmail.com>
8582 * disasm.c (gdb_disassembly): Remove unused argument
8584 * disasm.h (gdb_disassembly): Ditto.
8585 * cli/cli-cmds.c (print_disassembly): Ditto.
8586 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
8588 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
8590 * solib.c (solib_contains_address_p): New function.
8591 (solib_name_from_address): Use it.
8592 * printcmd.c (display_uses_solib_p): Use it.
8593 * solib.h (solib_contains_address_p): Declare it.
8595 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
8597 * varobj.c (free_variable): Call value_free.
8599 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
8602 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
8603 Move the variable `macinfo_type' out of the loop. Create a new
8604 processing pass before the current one to pre-create `current_file'.
8605 New complaint on misplaced zero/non-zero definitions/includes.
8606 Skip first DW_MACINFO_start_file with `at_commandline' set.
8608 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
8610 * solib.c (reload_shared_libraries): Give
8611 inferior a chance to reset solib breakpoint.
8614 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
8616 * windows-nat.c (dr): Redefine to use largest possible integer which
8618 (cygwin_set_dr): Avoid coercion.
8620 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
8622 * windows-nat.c (windows_create_inferior): Implement --tty handling on
8625 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
8627 Rename solib_address to solib_name_from_address.
8628 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
8629 (disable_breakpoints_in_unloaded_shlib): Update.
8630 * printcmd.c (display_uses_solib_p): Likewise.
8631 * stack.c (print_frame): Likewise.
8635 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
8637 * printcmd.c (do_one_display): Reparse exp_string.
8638 (display_uses_solib_p): New function.
8639 (clear_dangling_display_expressions): New function.
8640 (_initialize_printcmd): Add observer.
8641 * solib.c (no_shared_libraries): Swap order of calls to
8642 clear_solib and objfile_purge_solibs.
8644 2009-03-05 Joel Brobecker <brobecker@adacore.com>
8646 Implement the target-specific part of Ada tasking support
8649 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
8650 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
8652 2009-03-05 Joel Brobecker <brobecker@adacore.com>
8654 Get rid of the global "base_target" and use "find_target_beneath"
8655 to find the underlying target.
8656 * dec-thread.c (base_target): Delete.
8657 (enable_dec_thread): Remove assignement to base_target.
8658 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
8659 (dec_thread_fetch_registers, dec_thread_store_registers)
8660 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
8661 Update the function profile if necessary.
8662 Use find_target_beneath to call the same method but from
8663 the underlying target, removing the need for "base_target".
8665 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
8666 Fix a copy/paste error in a few debug traces...
8668 * solib-osf.c (init_so): Use a simpler method for computing
8669 the size of lm_info structure. This also gets rid of warning
8670 emitted by the compiler.
8672 2009-03-05 Pedro Alves <pedro@codesourcery.com>
8674 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
8675 duplicates of permanent breakpoints.
8677 2009-03-04 Pedro Alves <pedro@codesourcery.com>
8679 * inferior.h (notice_new_inferior): Declare.
8680 * infcmd.c (notice_new_inferior): New.
8681 * remote.c (remote_add_inferior, remote_add_thread): New.
8682 (notice_new_inferiors): Rename to...
8683 (remote_notice_new_inferior): ... this. Add RUNNING argument.
8684 Use remote_add_thread instead of add_thread, passing it the
8685 RUNNING argument. Add an inferior with remote_add_inferior. If
8686 we just learned about an inferior, call notice_new_inferior.
8687 (record_currthread): Adjust.
8688 (remote_threads_info): Adjust to use remote_notice_new_inferior.
8689 (remote_start_remote, extended_remote_attach_1): Use
8690 remote_add_inferior.
8691 (process_stop_reply): Adjust. Call remote_notice_new_inferior
8692 after handling expedited registers and watchpoint state.
8693 (extended_remote_create_inferior_1): Use remote_add_inferior.
8695 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
8697 * infcmd.c (registers_info): Remove register number case.
8699 2009-03-03 Pedro Alves <pedro@codesourcery.com>
8701 * top.c (quit_target): Check for target_has_execution before
8702 killing or detaching from inferiors.
8704 2009-03-02 Joel Brobecker <brobecker@adacore.com>
8706 Remove some unused routines.
8708 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
8710 * ada-lang.c (ada_task_list_iterator_ftype)
8711 (iterate_over_live_ada_tasks): Delete.
8712 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
8715 2009-03-01 Doug Evans <dje@google.com>
8717 * symtab.c: Remove trailing whitespace throughout the file.
8718 (expand_line_sal): Fix some typos and whitespace.
8720 * Makefile.in (clean): rm -f $(DEPDIR)/*.
8722 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
8723 (init.c): signals/ -> common/.
8724 (signals.o): Update.
8725 * target.h (target_signal_to_string,target_signal_to_string)
8726 (target_signal_from_name,target_signal_to_host_p)
8727 (target_signal_from_host,target_signal_to_host): Move to ...
8728 * common/gdb_signals.h: ... here. New file.
8729 * common/signals.c: Moved here from signals/signals.c.
8730 #include gdb_signals.h, remove #include of target.h in gdb case.
8731 (target_signal_from_command,default_target_signal_to_host)
8732 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
8734 Include thread ID in target_wait debugging output.
8735 * infrun.c (print_target_wait_results): New function.
8736 (wait_for_inferior,fetch_inferior_event): Call it.
8738 2009-02-27 Pedro Alves <pedro@codesourcery.com>
8740 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
8741 with a ptid_t field.
8742 * linux-thread-db.c (thread_get_info_callback): Build the ptid
8743 using the pid stored in proc_handle.ptid.
8744 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
8745 (check_for_thread_db, thread_db_detach, check_event)
8746 (thread_db_mourn_inferior, find_new_threads_callback)
8747 (thread_db_find_new_threads_1): Adjust.
8748 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
8749 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
8751 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
8753 * valprint.c (read_string): Rework clean-up logic. Use
8754 free_current_contents to clean-up buffer.
8756 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
8758 * MAINTAINERS: Update e-mail address.
8760 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
8762 * python/python-utils.c (python_string_to_unicode): Always return
8764 (python_string_to_target_string): Decrement transient python
8766 (python_string_to_host_string): Likewise.
8768 2007-02-26 Pedro Alves <pedro@codesourcery.com>
8770 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
8771 call to super_fetch_registers.
8772 (mips64_linux_store_registers): Pass `ops' to call to
8773 super_store_registers.
8775 2009-02-25 Doug Evans <dje@google.com>
8777 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
8780 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
8781 disabled_shlib_breaks, unused.
8783 * printcmd.c (build_address_symbolic): Fix comment.
8785 2009-02-25 Hui Zhu <teawater@gmail.com>
8787 * cli/cli-script.c (define_command): Add _() to query.
8788 * gnu-nat.c (inf_validate_task_sc): Ditto.
8789 * infcmd.c (kill_if_already_running): Ditto.
8790 (jump_command): Ditto.
8791 (attach_command): Ditto.
8792 * inflow.c (kill_command): Ditto.
8793 * infrun.c (handle_command): Ditto.
8794 * maint.c (maintenance_dump_me): Ditto.
8795 * memattr.c (mem_delete_command): Ditto.
8796 * monitor.c (monitor_interrupt_query): Ditto.
8797 * nto-procfs.c (interrupt_query): Ditto.
8798 * printcmd.c (undisplay_command): Ditto.
8799 * remote-mips.c (mips_kill): Ditto.
8800 * remote.c (interrupt_query): Ditto.
8801 * solib-irix.c (irix_open_symbol_file_object): Ditto.
8802 * solib-osf.c (osf_open_symbol_file_object): Ditto.
8803 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
8804 * solib-som.c (som_open_symbol_file_object): Ditto.
8805 * solib-svr4.c (open_symbol_file_object): Ditto.
8806 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
8807 * target.c (kill_or_be_killed): Ditto.
8808 * tracepoint.c (delete_trace_command): Ditto.
8809 * top.c (quit_confirm): Add _() to s that will be used
8812 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
8814 Fix windows-nat.c compilation failure.
8816 * windows-nat.c (windows_thread_alive): Fix forward declaration.
8817 (get_windows_debug_event): Add ops parameter to call to windows_resume.
8819 2009-02-23 Pedro Alves <pedro@codesourcery.com>
8821 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
8823 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
8825 * symtab.c (find_line_symtab): Initialize exact to avoid
8828 2009-02-23 Pedro Alves <pedro@codesourcery.com>
8830 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
8831 `ops' to recursive call.
8833 2009-02-23 Pedro Alves <pedro@codesourcery.com>
8835 * corelow.c (get_core_registers): Adjust.
8836 (core_file_thread_alive): Rename to...
8837 (core_thread_alive): ... this.
8838 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
8839 (init_core_ops): Adjust.
8840 (coreops_suppress_target): Delete.
8841 (_initialize_corelow): Unconditionally add core_ops.
8842 * procfs.c: Include "inf-child.h".
8843 (procfs_ops): Delete.
8844 (init_procfs_ops): Delete. Reimplement as...
8845 (procfs_target): ... this, inheriting from inf-child.
8846 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
8847 (procfs_prepare_to_store): Delete.
8848 (procfs_store_registers, procfs_resume): Adjust.
8849 (procfs_open): Delete.
8850 (procfs_suppress_run): Delete.
8851 (procfs_can_run): Delete.
8852 (procfs_mourn_inferior): Adjust.
8853 (procfs_init_inferior): Add target_ops parameter. Adjust.
8854 (procfs_create_inferior): Don't pass procfs_init_inferior to
8855 fork_inferior. Instead call it after fork_inferior returns.
8856 (procfs_find_new_threads): Adjust.
8857 (_initialize_procfs): Adjust to use procfs_target instead of
8859 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
8860 (lwp_to_thread): Use target_thread_alive.
8861 (sol_thread_open): Delete.
8862 (sol_thread_attach): Delete.
8863 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
8864 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
8865 to use find_target_beneath.
8866 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
8867 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
8868 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
8869 (check_for_thread_db): New.
8870 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
8871 (sol_thread_new_objfile): Call check_for_thread_db.
8872 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
8873 (sol_thread_can_run): Delete.
8874 (sol_thread_alive): Adjust to use find_target_beneath.
8875 (sol_thread_stop): Delete.
8876 (rw_common): Use target_write_memory or target_read_memory.
8877 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
8878 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
8879 (solaris_pid_to_str): Remove check for libthread_db initialization
8881 (sol_find_new_threads): Remove check for libthread_db
8882 initialization failing, or for an invalid inferior_ptid. Adjust
8883 to use find_target_beneath.
8884 (sol_core_open, sol_core_close, sol_core_detach,
8885 sol_core_files_info, sol_find_memory_regions,
8886 sol_make_note_section, ignore): Delete.
8887 (init_sol_thread_ops): Make it a thread_stratum target. Remove
8888 unneeded callback settings.
8889 (init_sol_core_ops): Delete.
8890 (_initialize_sol_thread): No longer call init_sol_core_ops, set
8891 procfs_suppress_run, or hack with core_ops.
8893 * target.h (struct target_ops): Add a target_ops * parameter to
8894 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
8895 and to_find_new_threads.
8896 (target_fetch_registers, target_store_registers)
8897 (target_thread_alive, target_find_new_threads): Redeclare as
8900 * target.c (update_current_target): Do not inherit or de_fault
8901 to_resume, to_fetch_registers, to_store_registers,
8902 to_thread_alive, to_find_new_threads.
8903 (target_resume): Adjust.
8904 (target_thread_alive, target_find_new_threads): New.
8905 (debug_to_resume, debug_to_fetch_registers): Delete.
8906 (target_fetch_registers): New.
8907 (debug_to_store_registers): Delete.
8908 (target_store_registers): New.
8909 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
8910 (setup_target_debug): Adjust.
8912 * gdbcore.h (core_ops): Delete declaration.
8914 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
8915 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
8916 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
8917 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
8918 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
8919 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
8920 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
8921 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
8922 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
8923 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
8924 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
8925 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
8926 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
8927 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
8929 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
8930 * gdbarch.h, gdbarch.c: Regenerate.
8932 * sol2-tdep.c: Include "inferior.h".
8933 (sol2_core_pid_to_str): New.
8934 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
8936 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
8937 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
8938 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
8939 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
8941 2009-02-22 Doug Evans <dje@google.com>
8943 * exec.c (exec_file_attach): Fix comment.
8945 2009-02-22 Pedro Alves <pedro@codesourcery.com>
8947 Silence a few -Wmissing-prototypes warnings.
8950 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
8952 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
8953 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
8954 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
8955 (_initialize_amd64nbsd_tdep): ... this.
8956 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
8957 (_initialize_arm_linux_tdep): Declare.
8958 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
8959 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
8960 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
8961 * avr-tdep.c (avr_return_value): Make it static.
8962 (avr_frame_unwind_cache): Ditto.
8963 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
8964 (bsd_uthread_solib_loaded): Ditto.
8965 (bsd_uthread_solib_unloaded): Ditto.
8966 (bsd_uthread_target): Ditto.
8967 (_initialize_bsd_uthread): Declare.
8968 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
8969 (cris_frame_unwind_cache): Ditto.
8970 * frv-tdep.c (frv_return_value): Ditto.
8971 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
8972 (h8300h_use_struct_convention): Ditto.
8973 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
8975 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
8977 * hppabsd-tdep.c: Include hppabsd-tdep.h.
8978 (hppabsd_find_global_pointer): Make it static.
8979 * hppabsd-tdep.h: New.
8980 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
8981 (hppabsd_init_abi): Remove declaration.
8982 (_initialize_hppabsd_tdep): Remove declaration.
8983 (_initialize_hppanbsd_tdep): Declare.
8984 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
8985 (hppabsd_init_abi): Delete declaration.
8986 (hppaobsd_init_abi): Make it static.
8987 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
8988 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
8989 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
8990 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
8991 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
8992 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
8993 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
8994 (_initialize_m32c_tdep): Declare.
8995 * m32r-rom.c (_initialize_m32r_rom): Declare.
8996 * m32r-tdep.c (m32r_skip_prologue): Make it static.
8997 (m32r_return_value): Ditto.
8998 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
8999 (m68hc11_return_value): Ditto.
9000 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
9001 * m88k-tdep.c (m88k_frame_cache): Make it static.
9002 * mep-tdep.c (mep_gdb_print_insn): Ditto.
9003 (mep_return_value): Ditto.
9004 (_initialize_mep_tdep): Declare.
9005 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
9006 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
9007 (mips_linux_syscall_next_pc): Ditto.
9008 (_initialize_mips_linux_tdep): Declare.
9009 * mips-tdep.c (mips_single_step_through_delay): Make it static.
9010 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
9011 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
9012 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
9013 * mt-tdep.c (_initialize_mt_tdep): Declare.
9014 * nbsd-tdep.c: Include nbsd-tdep.h.
9015 * nto-tdep.c (find_load_phdr): Make it static.
9016 (_initialize_nto_tdep): Declare.
9017 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
9019 (_initialize_ppc_linux_tdep): Declare.
9020 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
9021 (m32r_insert_watchpoint, m32r_remove_watchpoint)
9022 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
9024 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
9025 * rs6000-nat.c: Include xcoffread.h.
9026 (find_toc_address): Don't extern declare get_toc_offset. Adjust
9027 to call xcoff_get_to_offset.
9028 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
9029 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
9030 (rs6000_skip_trampoline_code): Make static.
9031 * s390-tdep.c (s390_regset_from_core_section): Ditto.
9032 * sh-tdep.c (sh_register_reggroup_p): Ditto.
9033 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
9034 (_initialize_shnbsd_tdep): Declare.
9035 * solib-frv.c (displacement_from_map): Make static.
9036 (_initialize_frv_solib): Declare.
9037 * solib-irix.c (fetch_lm_info): Make static.
9038 (_initialize_irix_solib): Declare.
9039 * solib-som.c: Include solib-som.h.
9040 (som_solib_select): Line break.
9041 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
9042 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
9043 (_initialize_sparcnbsd_tdep): ... this.
9044 * spu-tdep.c (spu_software_single_step): Make it static.
9045 (_initialize_spu_tdep): Declare.
9046 * vax-tdep.c (vax_frame_cache): Make it static.
9047 * xcoffread.c: Include xcoffread.h.
9048 (get_toc_offset): Rename to ...
9049 (xcoff_get_toc_offset): ... this.
9050 (_initialize_xcoffread): Declare.
9052 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
9053 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
9055 (_initialize_xtensa_tdep): Declare.
9057 2008-02-21 Pedro Alves <pedro@codesorcery.com>
9059 Silence a few -Wmissing-prototypes warnings.
9062 * amd64-nat.c: Include "amd64-nat.h".
9063 * fork-child.c (_initialize_fork_child): Ditto.
9064 * gcore.c (_initialize_gcore): Ditto.
9065 * inf-ptrace.c: Include "inf-ptrace.h".
9066 (inf_ptrace_store_registers): Make it static.
9067 * linux-nat.c (linux_nat_terminal_ours): Make it static.
9068 (_initialize_linux_nat): Declare before definition.
9069 * linux-tdep.c: Include "linux-tdep.h".
9070 * linux-thread-db.c (_initialize_thread_db): Declare before
9072 * proc-service.c (_initialize_proc_service): Ditto.
9073 * remote.c (remote_send_printf): Make it static.
9074 * solib.c: Include "solib.h".
9075 * symfile-mem.c (_initialize_symfile_mem): Declare before
9077 * ada-lang.c (ada_la_decode, ada_match_name)
9078 (ada_suppress_symbol_printing, ada_is_array_type)
9079 (ada_value_ptr_subscript, ada_array_length)
9080 (ada_to_static_fixed_value): Make them static.
9081 (_initialize_ada_language): Declare before definition.
9082 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
9083 (ada_task_list_changed, ada_new_objfile_observer): Make them
9085 (_initialize_tasks): Declare before definition.
9086 * addrmap.c (_initialize_addrmap): Declare before definition.
9087 * auxv.c (default_auxv_parse): Make it static.
9088 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
9090 * breakpoint.c (remove_sal): Add line break.
9091 (expand_line_sal_maybe): Make it static.
9092 * cp-name-parser.y: Include "cp-support.h".
9093 * cp-valprint.c (cp_find_class_member): Make it static.
9094 * eval.c (value_f90_subarray): Ditto.
9095 * exceptions.c (print_any_exception): Ditto.
9096 * findcmd.c (_initialize_mem_search): Declare before definition.
9097 * frame.c (frame_observer_target_changed): Make it static.
9098 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
9099 * inf-child.c: Include "inf-child.h".
9100 * inferior.h (valid_inferior_id): Rename to ...
9101 (valid_gdb_inferior_id): ... this.
9102 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
9104 * jv-lang.c (java_language_arch_info): Make it static.
9105 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
9106 * osdata.c (info_osdata_command): Make it static.
9107 * regcache.c (regcache_observer_target_changed): Make it static.
9108 * reverse.c (_initialize_reverse): Declare before definition.
9109 * stabsread.c (cleanup_undefined_types_noname)
9110 (cleanup_undefined_types_1): Make them static.
9111 * symfile.c (place_section): Make it static.
9112 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
9113 * target-descriptions.c (_initialize_target_descriptions): Declare
9115 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
9116 (find_default_is_async_p, find_default_supports_non_stop): Make
9118 (target_supports_non_stop): Add prototype.
9119 (dummy_pid_to_str): Make it static.
9120 * utils.c (_initialize_utils): Declare before definition.
9121 * ada-exp.y (_initialize_ada_exp): Declare before definition.
9122 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
9123 * target.h (struct target_ops): Add a prototype to the
9124 to_can_execute_reverse callback.
9125 * macroscope.c (_initialize_macroscope): Declare before definition.
9126 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
9127 * python/python.c (_initialize_python): Declare before definition.
9128 * tui/tui-command.c: Include "tui/tui-command.h".
9129 * tui/tui-data.c (init_content_element, init_win_info): Make them
9131 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
9132 * tui/tui-interp.c (_initialize_tui_interp): Declare before
9134 * tui/tui-layout.c: Include "tui/tui-layout.h".
9135 (_initialize_tui_layout): Declare before definition.
9136 * tui/tui-regs.c: Include "tui/tui-regs.h".
9137 (tui_display_reg_element_at_line): Make it static.
9138 (_initialize_tui_regs): Declare before definition.
9139 * tui/tui-stack.c (_initialize_tui_stack): Declare before
9141 * tui/tui-win.c: Include "tui/tui-win.h".
9142 (_initialize_tui_win): Declare before definition.
9143 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
9144 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
9145 (tui_get_cmd_list): Add a prototype.
9146 * tui/tui-windata.c: Include tui-windata.h.
9147 * tui/tui-wingeneral.c (box_win): Make it static.
9148 * cli/cli-logging.c (show_logging_command): Make it static.
9149 (_initialize_cli_logging): Declare before definition.
9150 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
9153 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
9155 Extend use of i386_use_watchpoints to all i386 native files
9156 using hardware watchpoints.
9157 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
9158 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
9159 * windows-nat.c (init_windows_ops): Ditto.
9160 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
9161 * config/i386/nm-cygwin64.h: Ditto.
9162 * config/i386/nm-fbsd.h: Ditto.
9163 * config/i386/nm-go32.h: Ditto.
9165 2009-02-19 Joel Brobecker <brobecker@adacore.com>
9167 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
9169 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
9171 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
9172 (mi_interpreter_init): Register the above.
9173 * solib.c (clear_solib): Notify solib unload.
9174 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
9175 disable breakpoints on a.out targets.
9177 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
9179 * observer.c (observer_test_first_notification_function)
9180 (observer_test_second_notification_function)
9181 (observer_test_third_notification_function): Adjust prototype.
9183 2009-02-17 Pedro Alves <pedro@codesourcery.com>
9185 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
9186 (ALL_TARGET_OBS): Add dicos-tdep.o.
9187 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
9188 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
9190 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
9192 * dicos-tdep.h, dicos-tdep.c: New.
9193 * amd64-dicos-tdep.c: New.
9194 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
9195 inferior.h. Include dicos-tdep.h.
9196 (i386_dicos_init_abi): Call dicos_init_abi.
9197 (i386_dicos_bfd_has_symbol_p): Delete.
9198 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
9200 * NEWS: Mention x86-64 DICOS target support.
9202 2009-02-16 Doug Evans <dje@google.com>
9204 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
9205 All callers updated.
9206 (amd64_get_insn_details): Handle more 3-byte opcode insns.
9207 (amd64_breakpoint_p): Delete.
9208 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
9209 don't back up pc to the start of the int3.
9210 * i386-tdep.c: #include opcode/i386.h.
9211 (i386_skip_prefixes): New function.
9212 (i386_absolute_jmp_p): Constify argument.
9213 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
9214 (i386_breakpoint_p): Delete.
9215 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
9216 When fixing up after stepping an int3, don't back up pc to the start
9219 2009-02-16 Pedro Alves <pedro@codesourcery.com>
9221 * corelow.c (core_close): Don't hardcode the core's pid.
9222 (core_open): Find core threads before calling
9223 post_create_inferior.
9224 (add_to_thread_list, get_core_register_section): Take into account
9225 systems where the regset section names encode the pid of the
9228 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
9229 * gdbarch.h, gdbarch.c: Regenerate.
9231 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
9232 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
9233 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
9234 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
9236 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
9238 Include frame information for *stopped due to CLI commands.
9240 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
9241 * infcmd.c (finish_command_continuation): Pass '1' for
9242 'print_frame' parameter to the observer.
9243 * infrun.c (normal_stop): Don't print mi-specific information
9244 here. Pass 'stop_print_frame' to the 'print_frame' parameter
9246 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
9247 If we need to print frame, and current uiout is not the MI one,
9250 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
9252 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
9253 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
9255 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
9258 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
9259 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
9261 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
9263 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
9264 for DW_ATE_signed_char and DW_ATE_unsigned_char
9265 for pascal language.
9267 2009-02-11 Jim Meyering <meyering@redhat.com>
9268 Jan Kratochvil <jan.kratochvil@redhat.com>
9270 Avoid NULL dereference.
9271 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
9272 New variable func_type.
9274 2009-02-11 Pedro Alves <pedro@codesourcery.com>
9276 * gdbarch.c: Regenerate.
9278 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
9280 * p-lang.c (is_pascal_string_type): Fix comment.
9281 Determine exact size of char elements for GPC
9283 (pascal_printstr): Handle char width of 2 or 4.
9284 * p-valprint.c (pascal_val_print): Handle char
9287 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
9289 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
9290 inside the loop. Only call addrmap_set_empty if the compilation unit
9291 had DW_AT_high_pc and DW_AT_low_pc. Update call to
9292 scan_partial_symbols.
9293 (scan_partial_symbols): Take NEED_PC argument and pass it along with
9295 (add_partial_namespace): Take NEED_PC argument and pass it through.
9296 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
9299 2009-02-07 Pedro Alves <pedro@codesourcery.com>
9301 * NEWS: Mention inspecting extra signal information, $_siginfo,
9302 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
9304 2009-02-07 Pedro Alves <pedro@codesourcery.com>
9306 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
9309 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9311 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
9312 (compat_timer_t, compat_clock_t, struct compat_timeval)
9313 (compat_sigval_t, compat_siginfo_t): New types.
9314 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
9315 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
9316 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
9317 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
9318 (amd64_linux_siginfo_fixup): New.
9319 * linux-nat.c (linux_nat_siginfo_fixup): New.
9320 (siginfo_fixup): New.
9321 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
9322 siginfo layout expected by ptrace and the siginfo layout of the
9324 (linux_nat_set_siginfo_fixup): New.
9325 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
9327 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9329 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
9330 * infrun.c (siginfo_value_read, siginfo_value_write): New.
9331 (siginfo_value_funcs): New.
9332 (siginfo_make_value): New.
9333 (_initialize_infrun): Create the $_siginfo convenience variable.
9334 * gdbtypes.h (append_composite_type_field_aligned): Declare.
9335 * gdbtypes.c (append_composite_type_field): Rename to...
9336 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
9337 argument. Handle it.
9338 (append_composite_type_field): Rewrite on top of
9339 append_composite_type_field_aligned.
9340 * value.h (internalvar_make_value): New typedef.
9341 (struct internalvar) <make_value>: New field.
9342 (create_internalvar_type_lazy): Declare.
9343 * value.c (create_internalvar): Clear make_value.
9344 (create_internalvar_type_lazy): New.
9345 (value_of_internalvar): If make_value is set use it.
9346 (preserve_values): Skip internal variables that don't have a
9348 * gdbarch.sh (get_siginfo_type): New.
9349 * gdbarch.h, gdbarch.c: Regenerate.
9351 * linux-tdep.h, linux-tdep.c: New.
9352 * amd64-linux-tdep.c: Include "linux-tdep.h".
9353 (amd64_linux_init_abi): Register linux_get_siginfo_type and
9354 linux_get_siginfo_mapper.
9355 * i386-linux-tdep.c: Include "linux-tdep.h".
9356 (i386_linux_init_abi): Register linux_get_siginfo_type and
9357 linux_get_siginfo_mapper.
9358 * arm-linux-tdep.c: Include "linux-tdep.h".
9359 (i386_linux_init_abi): Register linux_get_siginfo_type and
9360 linux_get_siginfo_mapper.
9362 * linux-nat.c (linux_xfer_siginfo): New.
9363 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
9364 * remote.c (PACKET_qXfer_siginfo_read)
9365 (PACKET_qXfer_siginfo_write): New.
9366 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
9367 "qXfer:siginfo:write" features.
9368 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
9369 (_initialize_remote): Add "set/show remote read-siginfo-object"
9370 and "set/show remote write-siginfo-object" commands.
9372 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
9373 (HFILES_NO_SRCDIR): Add linux-tdep.h.
9374 (ALLDEPFILES): Add linux-tdep.c.
9376 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
9377 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
9380 2009-02-06 Jim Blandy <jimb@codesourcery.com>
9381 Daniel Jacobowitz <dan@codesourcery.com>
9382 Vladimir Prus <vladimir@codesourcery.com>
9383 Pedro Alves <pedro@codesourcery.com>
9385 * defs.h (enum lval_type): New value: lval_computed.
9386 * value.h (struct lval_funcs): New type.
9387 (allocate_computed_value, value_computed_funcs)
9388 (value_computed_closure): New declarations.
9389 * value.c (struct value): Add a structure to the location union
9390 for computed lvalues, containing 'funcs' and 'closure' members.
9391 (allocate_computed_value, value_computed_funcs)
9392 (value_computed_closure): New functions.
9393 (value_free): For computed lvalues, call the closure's
9394 'free_closure' function before freeing the value itself.
9395 (value_copy): If we're copying an lval_computed value, call the
9396 closure's 'copy_closure' function.
9397 (set_value_component_location): If the original value is a
9398 computed lvalue, then call the closure's 'copy_closure' function.
9399 (value_of_internalvar): If an internal variable's value is a
9400 computed lvalue, make retrieving its value produce an equivalent
9402 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
9403 their read function.
9404 (value_assign): Assign to computed lvalues by calling their write
9407 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9409 * linux-nat.c (linux_nat_wait): Adjust.
9410 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
9411 * linux-nat.h (thread_db_init): Delete declaration.
9412 * linux-thread-db.c (target_beneath): Delete.
9413 (thread_db_init): Delete.
9414 (thread_db_detach): Use find_target_beneath.
9415 (thread_db_wait): Adjust interface. Use find_target_beneath.
9416 (thread_db_mourn_inferior): Use find_target_beneath.
9417 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
9418 (thread_db_async_mask): Delete.
9419 (thread_db_pid_to_str): Adjust interface. Use
9420 find_target_beneath.
9421 (thread_db_get_thread_local_address): Adjust interface. Use
9422 find_target_beneath.
9423 (init_thread_db_ops): Delete references to delete functions.
9424 * target.c (update_current_target): Don't inherit or default
9425 to_wait. Don't inherit to_pid_to_str and
9426 to_get_thread_local_address.
9427 (target_translate_tls_address): Look for a pushed target that
9428 implements to_get_thread_local_address, and use it instead of
9429 checking for target_get_thread_local_address_p.
9430 (target_wait, target_pid_to_str): Reimplement as functions.
9431 (dummy_pid_to_str): New.
9432 (init_dummy_target): Register it.
9433 (debug_to_wait): Delete.
9434 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
9435 to_get_thread_local_address accept a pointer to struct target_ops.
9436 (target_wait): Delete macro, and declare as function.
9437 (target_pid_to_str): Likewise.
9438 (target_get_thread_local_address)
9439 (target_get_thread_local_address_p): Delete.
9440 (noprocess): Add NORETURN and ATTR_NORETURN tags.
9441 * inf-ptrace.c (inf_ptrace_wait): Adjust.
9442 (inf_ptrace_pid_to_str): New.
9443 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
9444 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
9445 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
9446 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
9448 * corelow.c (core_pid_to_str): Adjust.
9449 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
9450 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
9451 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
9452 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
9453 * hpux-thread.c (hpux_thread_wait): Adjust.
9454 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
9455 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
9456 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
9457 * procfs.c (procfs_pid_to_str): Adjust.
9458 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
9459 * remote-mips.c (mips_wait): Adjust.
9460 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
9461 * remote.c (remote_wait, remote_pid_to_str)
9462 (remote_get_thread_local_address): Adjust.
9463 * rs6000-nat.c (rs6000_wait): Adjust.
9464 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
9465 (sol_thread_wait, solaris_pid_to_str): Adjust.
9466 * spu-linux-nat.c (spu_child_wait): Adjust.
9467 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
9469 2009-02-06 Tom Tromey <tromey@redhat.com>
9471 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
9472 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
9473 (python-cmd.o): New target.
9474 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
9475 completer prototype.
9476 (add_cmd): Initialize destroyer member of cmd_list_element. Use
9477 make_symbol_completion_list_fn as completer.
9478 (delete_cmd): Call destroyer if one is set.
9479 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
9480 completer member. Add destroyer member.
9481 (set_cmd_completer): Add self parameter to
9482 completer prototype.
9483 * command.h (set_cmd_completer): Add cmd parameter to
9484 completer prototype.
9485 * completer.c (noop_completer, filename_completer,
9486 location_completer, expression_completer, command_completer): Adapt
9487 to new completer prototype.
9488 (complete_line_internal): Pass new parameter to completer function.
9489 * completer.h (noop_completer, filename_completer,
9490 location_completer, expression_completer, command_completer): Adapt
9491 prototypes to new completer prototype.
9492 * interps.c (interpreter_completer): Adapt to new completer
9494 * python/python-cmd.c: New file.
9495 * python/python-internal.h (gdbpy_initialize_commands): Add
9497 (gdbpy_doc_cst): Add forward declaration.
9498 * python/python.c (gdbpy_doc_cst): Declare.
9499 (_initialize_python): Call gdbpy_initialize_commands. Initialize
9501 * symtab.c (make_symbol_completion_list_fn): New function.
9502 * symtab.h (make_symbol_completion_list_fn): Add prototype.
9504 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9506 * target.c (target_get_osdata): Check for equal or higher than
9507 process_stratum, not dummy_stratum.
9509 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9511 * remote.c (extended_remote_can_run): Delete.
9512 (init_remote_ops): Don't register it.
9513 * target.c (target_get_osdata): Don't check for target_can_run.
9514 Instead any target that has already been pushed, otherwise
9515 fallback to the default run target.
9517 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9519 * target.c (target_create_inferior, target_detach)
9520 (target_mourn_inferior, target_attach, target_close): Do target
9522 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
9523 (debug_to_mourn_inferior, debug_to_close): Delete.
9524 (setup_target_debug): Adjust.
9526 2009-02-05 Pedro Alves <pedro@codesourcery.com>
9528 * target.h (target_stopped_data_address_p): Delete declaration,
9529 and don't define as macro.
9530 * target.c (target_stopped_data_address_p): Delete.
9532 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
9533 Tom Tromey <tromey@redhat.com>
9535 * python/python-utils.c (target_string_to_unicode): New function.
9536 * python/python-internal.h (target_string_to_unicode): New prototype.
9537 * python/python-value.c (valpy_string): New function.
9538 (value_object_methods): Add `string' entry.
9540 2009-02-05 Pedro Alves <pedro@codesourcery.com>
9542 * target.h (target_tid_to_str): Delete.
9543 * thread.c (print_thread_info, thread_apply_all_command)
9544 (thread_apply_command, thread_command, do_captured_thread_select):
9545 Use target_pid_to_str instead of target_tid_to_str.
9546 * linux-fork.c (delete_fork_command): Likewise.
9548 2009-02-05 Pedro Alves <pedro@codesourcery.com>
9550 * frame.c (has_stack_frames): Make public.
9551 (get_prev_frame): Don't allow a NULL this_frame anymore.
9552 * frame.h (has_stack_frames): Declare.
9553 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
9554 to get_prev_frame, instead start at get_current_frame.
9555 (varobj_create): Check has_stack_frames before getting any frame;
9556 eliminate one usage of deprecated_safe_get_selected_frame.
9558 2009-02-05 Tom Tromey <tromey@redhat.com>
9559 Thiago Jung Bauermann <bauerman@br.ibm.com>
9561 * python/python.c (GdbMethods): Move to bottom of file.
9562 (get_parameter, execute_gdb_command, gdbpy_write,
9563 gdbpy_flush): Remove forward declarations.
9564 (eval_python_from_control_command): Fix error checking of function
9565 PyRun_SimpleString. Fix error string.
9566 (python_command): Likewise.
9567 (execute_gdb_command): Added from_tty argument.
9569 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
9571 * language.h (language_dfn): Add la_get_string member.
9572 (LA_GET_STRING): New macro.
9573 (default_get_string): New prototype.
9574 * language.c (default_get_string): New function.
9575 (unknown_language_defn, auto_language_defn, local_language_defn): Use
9576 default_get_string for la_get_string.
9577 * c-lang.c (c_get_string): New function.
9578 (c_language_defn, cplus_language_defn, asm_language_defn): Use
9579 c_get_string for la_get_string.
9580 (minimal_language_defn): Likewise
9581 * ada-lang.c (ada_language_defn): Likewise.
9582 * f-lang.c (f_language_defn): Use default_get_string for
9584 * jv-lang.c (java_language_defn): Likewise.
9585 * m2-lang.c (m2_language_defn): Likewise.
9586 * objc-lang.c (objc_language_defn): Likewise.
9587 * p-lang.c (p_language_defn): Likewise.
9588 * scm-lang.c (scm_language_defn): Likewise.
9589 * typeprint.c (type_to_string): New function.
9590 * value.h (type_to_string): New prototype.
9591 * valprint.c (val_print_string): Factor out code for reading string
9592 from the inferior into its own function. Put 2 spaces after period
9594 (read_string): New function.
9595 * valprint.h (read_string): New prototype.
9597 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
9598 Tom Tromey <tromey@redhat.com>
9600 PR breakpoints/8079:
9601 * breakpoint.c (print_one_breakpoint): Use exp_string field
9602 to display expression of watchpoints.
9603 (mention): Likewise.
9604 (watch_command_1): Remove trailing whitespace from expression.
9605 * printcmd.c (struct display) <exp_string>: New field.
9606 (display_command): Set exp_string.
9607 (free_display): Free exp_string.
9608 (clear_displays): Use free_display.
9609 (do_one_display): Print exp_string.
9610 (display_info): Likewise.
9612 2009-02-04 Tom Tromey <tromey@redhat.com>
9613 Thiago Jung Bauermann <bauerman@br.ibm.com>
9614 Phil Muldoon <pmuldoon@redhat.com>
9616 * python/python-internal.h (gdbpy_get_value_from_history): Rename
9617 prototype to gdbpy_history.
9618 (gdbpy_is_string): Declare.
9619 (python_string_to_host_string): Declare.
9620 * python/python-utils.c (gdbpy_is_string): New function.
9621 (unicode_to_encoded_string): New function.
9622 (unicode_to_target_string): Use it.
9623 (python_string_to_host_string): New function.
9624 * python/python-value.c (valpy_address): New function.
9625 (convert_value_from_python): Use gdbpy_is_string. Change to throw
9626 Python exception instead of a GDB exception on error. Properly check
9628 (valpy_getitem): Convert field name to host string. Handle array
9629 accesses. Adapt to new behaviour of convert_value_from_python.
9630 (valpy_new): Adapt to new behaviour of convert_value_from_python.
9631 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
9632 VALPY_BITXOR, VALPY_BITOR>: New constants.
9633 (valpy_binop): Update. Adapt to new behaviour of
9634 convert_value_from_python.
9635 (valpy_invert): New function.
9636 (valpy_lsh): Likewise.
9637 (valpy_rsh): Likewise.
9638 (valpy_and): Likewise.
9639 (valpy_or): Likewise.
9640 (valpy_xor): Likewise.
9641 (valpy_richcompare): Call convert_value_from_python instead of doing
9643 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
9644 (gdbpy_get_value_from_history): Rename
9645 function to gdbpy_history.
9646 (gdbpy_initialize_values): Don't set tp_new.
9647 (value_object_type): Add valpy_new.
9648 (value_object_methods): Add `address' entry.
9649 (value_object_as_number): Update for new methods.
9650 * python/python.c (GdbMethods): Rename entry from
9651 `get_value_from_history' to `history'.
9653 2009-02-04 Jerome Guitton <guitton@adacore.com>
9655 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
9656 of type to guard against a crash.
9658 2009-02-04 Jerome Guitton <guitton@adacore.com>
9660 * value.c (value_from_contents_and_address): Always return
9661 a lval_memory value, even if address is null.
9663 2009-02-04 Tristan Gingold <gingold@adacore.com>
9665 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
9666 (amd64_darwin_sigcontext_addr): Ditto.
9667 (darwin_dwarf_signal_frame_p): Ditto.
9668 (i386_darwin_init_abi): Handle signal frames, use the const for
9670 (x86_darwin_init_abi_64): Ditto.
9672 2009-02-04 Tristan Gingold <gingold@adacore.com>
9674 * i386-tdep.c (i386_sigtramp_p): Make it public.
9675 * i386-tdep.h (i386_sigtramp_p): Declare.
9677 2009-02-04 Tristan Gingold <gingold@adacore.com>
9679 * machoread.c (macho_symfile_read): Read minsymtab also from
9681 (macho_symfile_read): Try to read dwarf2 frame info from main
9682 object file, but not from OSO files.
9683 (macho_symfile_offsets): Update section names for latest BFD
9685 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
9686 (x86_darwin_init_abi_64): Ditto.
9687 * solib-darwin.c: New file.
9688 * solib-darwin.h: New file.
9689 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
9691 2009-02-04 Tristan Gingold <gingold@adacore.com>
9693 * solist.h (struct target_so_ops): Comment fallback behavior for
9696 2009-02-03 Tom Tromey <tromey@redhat.com>
9698 * completer.c (add_struct_fields): Check type_name against NULL
9701 2009-02-03 Joel Brobecker <brobecker@adacore.com>
9703 * MAINTAINERS: Update Elena's email address.
9705 2009-02-02 Joel Brobecker <brobecker@adacore.com>
9707 * breakpoint (update_watchpoint): Minor comment adjustment.
9709 2009-02-02 Tom Tromey <tromey@redhat.com>
9712 * completer.c (count_struct_fields): Count method names.
9713 (add_struct_fields): Add matching method names.
9715 2009-02-02 Doug Evans <dje@google.com>
9717 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
9718 doing any further tcl/tk configury. Don't configure gdbtk if
9719 tcl or tk check fails.
9720 * aclocal.m4: Regenerate.
9721 * configure: Regenerate.
9723 2009-02-02 Tom Tromey <tromey@redhat.com>
9726 * valops.c (find_overload_match): Follow typedefs before taking
9727 address of object argument.
9729 2009-02-01 Doug Evans <dje@google.com>
9731 * target.h (target_waitstatus_to_string): Declare.
9732 * target.c (target_waitstatus_to_string): New function. Copied from
9733 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
9734 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
9735 TARGET_WAITKIND_NO_HISTORY.
9736 (debug_to_wait): Call it.
9737 * infrun.c (wait_for_inferior): If debug_infrun, print result of
9739 (fetch_inferior_event): Ditto.
9741 2009-01-30 Tom Tromey <tromey@redhat.com>
9743 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
9745 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
9748 * thread.c (do_captured_list_thread_ids): Report the current
9751 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
9753 * breakpoint.c (create_breakpoint, create_breakpoints)
9754 (break_command_really, set_breakpoint): New parameter enabled.
9755 (create_breakpoint, break_command_really): Make breakpoint
9756 disabled if so requested.
9757 * breakpoint.h (set_breakpoint): New parameter enabled.
9758 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
9760 2009-01-28 Doug Evans <dje@google.com>
9762 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
9763 (amd64_displaced_step_fixup): Declare.
9764 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
9765 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
9766 and make static global.
9767 (amd64_arch_regmap_len): New static global.
9768 (amd64_arch_reg_to_regnum): New function.
9769 (struct amd64_insn): New struct.
9770 (struct displaced_step_closure): New struct.
9771 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
9772 (rex_prefix_p,skip_prefixes)
9773 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
9774 (amd64_insn_length,amd64_get_unused_input_int_reg)
9775 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
9776 (amd64_displaced_step_copy_insn)
9777 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
9778 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
9779 (amd64_displaced_step_fixup): New functions.
9780 * amd64-linux-tdep.c: #include arch-utils.h.
9781 (amd64_linux_init_abi): Install displaced stepping support.
9783 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
9784 Jerome Guitton <guitton@adacore.com>
9786 * configure, config.in: Regenerated.
9787 * configure.ac: Add --with-system-gdbinit.
9788 * main.c (get_init_files): New.
9789 (captured_main): Use get_init_files. Load system gdbinit before
9791 (print_gdb_help): Print location of init files.
9793 2009-01-28 Pedro Alves <pedro@codesourcery.com>
9795 * corefile.c (generic_search): Delete disabled code.
9796 * gdbcore.h (generic_search): Delete declaration.
9798 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9800 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
9801 parent to the child.
9802 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
9803 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
9804 remove_breakpoints to remove breakpoints from the parent.
9806 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9808 PR backtrace/9458, PR backtrace/8864:
9809 * frame.c (create_new_frame): Update the frame's cached PC before
9810 finding its unwinder. Use frame_id_build to build the new frame's
9812 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
9813 array values from the ``args'' array values.
9815 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9817 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
9818 (create_array_type, create_set_type, init_flags_type)
9819 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
9820 with a call to XZALLOC or XCALLOC, and pairs of calls to
9821 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
9823 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9825 Add "maint set|show internal-error|internal-warning quit|corefile
9826 ask|yes|no" commands.
9829 * utils.c (internal_problem_ask, internal_problem_yes)
9830 (internal_problem_no, internal_problem_modes): New.
9831 (struct internal_problem): Remove FIXME. Make should_quit and
9832 should_dump_core types to char *.
9833 (internal_vproblem, internal_error_problem)
9834 (internal_warning_problem): Adjust.
9835 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
9837 (add_internal_problem_command): New.
9838 (_initialize_utils): New.
9840 2009-01-25 Pedro Alves <pedro@codesourcery.com>
9842 * infcmd.c (program_info): Use paddress instead of casting stop_pc
9845 2009-01-24 Pedro Alves <pedro@codesourcery.com>
9847 * infrun.c (normal_stop): Don't call
9848 deprecated_update_frame_pc_hack.
9849 * frame.c (deprecated_update_frame_pc_hack)
9850 (deprecated_update_frame_base_hack): Delete, and ...
9851 (create_new_frame): ... inline here.
9852 * frame.h (deprecated_update_frame_pc_hack)
9853 (deprecated_update_frame_base_hack): Delete declarations.
9855 2009-01-23 Pedro Alves <pedro@codesourcery.com>
9857 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
9858 * cli/cli-setshow.c (do_setshow_command): Handle it.
9859 * command.h (enum var_types): Add var_zuinteger.
9860 (add_setshow_zuinteger_cmd): Declare.
9862 * valprint.c (_initialize_valprint): Change the set input-radix
9863 and set output-radix commands to zuinteger type.
9865 2009-01-23 Pedro Alves <pedro@codesourcery.com>
9868 * infrun.c (normal_stop): Tag threads as stopped, and run the
9869 hook-stop before printing the stack frame.
9871 2009-01-22 Pedro Alves <pedro@codesourcery.com>
9874 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
9877 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
9879 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
9882 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
9885 * infcmd.c (signal_command): Do not specify a resume PC.
9887 2009-01-19 Doug Evans <dje@google.com>
9889 * dummy-frame.c (dummy_frame): Replace regcache member with
9891 (dummy_frame_push): Replace caller_regcache arg with caller_state.
9892 All callers updated.
9893 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
9894 (dummy_frame_pop): Rewrite. Verify requested frame is in the
9895 dummy frame stack. Restore program state.
9896 (cleanup_dummy_frames): Rewrite.
9897 (dummy_frame_sniffer): Update. Make static.
9898 * dummy-frame.h (regcache,frame_info): Delete forward decls.
9899 (inferior_thread_state): New forward decl.
9900 (dummy_frame_push): Update prototype.
9901 * frame.c (frame_pop): dummy_frame_pop now does all the work for
9903 * infcall.c (breakpoint_auto_delete_contents): Delete.
9904 (get_function_name,run_inferior_call): New fns.
9905 (call_function_by_hand): Simplify by moving some code to
9906 get_function_name, run_inferior_call. Inferior function call wrapped
9907 in TRY_CATCH so there's less need for cleanups and all exits from
9908 proceed are handled similarily. Detect program exit.
9909 Detect program stopping in a different thread.
9910 Make error messages more consistent.
9911 * inferior.h (inferior_thread_state): Declare (opaque type).
9912 (save_inferior_thread_state,restore_inferior_thread_state,
9913 make_cleanup_restore_inferior_thread_state,
9914 discard_inferior_thread_state, get_inferior_thread_state_regcache):
9916 (save_inferior_status): Update prototype.
9917 * infrun.c: (normal_stop): When stopped for the completion of an
9918 inferior function call, verify the expected stack frame kind.
9919 (inferior_thread_state): New struct.
9920 (save_inferior_thread_state,restore_inferior_thread_state,
9921 do_restore_inferior_thread_state_cleanup,
9922 make_cleanup_restore_inferior_thread_state,
9923 discard_inferior_thread_state,
9924 get_inferior_thread_state_regcache): New functions.
9925 (inferior_status): Move stop_signal, stop_pc, registers to
9926 inferior_thread_state. Remove restore_stack_info.
9927 (save_inferior_status): Remove arg restore_stack_info.
9928 All callers updated. Remove saving of state now saved by
9929 save_inferior_thread_state.
9930 (restore_inferior_status): Remove restoration of state now done by
9931 restore_inferior_thread_state.
9932 (discard_inferior_status): Remove freeing of registers, now done by
9933 discard_inferior_thread_state.
9935 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9937 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
9938 at a time, times NUM_TO_SCROLL.
9939 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
9940 fetch the selected frame if there is no stack.
9942 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9945 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
9947 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
9948 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
9949 is thrown while handling an event, finish the thread state.
9950 (normal_stop): Use finish_thread_state cleanup.
9951 * infcmd.c (run_command_1): If an error is thrown while starting
9952 the inferior, finish the thread state.
9954 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9956 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
9957 skip breakpoints without a location (pending breakpoints).
9959 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9962 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
9964 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
9966 * thread.c (thread_command): Move call to annotate_thread_changed
9968 (do_captured_thread_select): ... here, to avoid printing an
9969 annotation if the thread change generates an exception.
9971 2009-01-16 Joel Brobecker <brobecker@adacore.com>
9973 * NEWS: Document x86_64/MinGW as a new native configuration.
9975 2009-01-16 Joel Brobecker <brobecker@adacore.com>
9977 * NEWS: Move the documentation of "info os processes" to
9978 the appropriate section (documenting the new commands).
9980 2009-01-15 Doug Evans <dje@google.com>
9982 * target.h (target_signal_to_string): Make return type const char *.
9983 (target_signal_to_name): Ditto.
9984 (target_signal_from_name): Make arg const char *.
9985 * infrun.c (sig_print_info): Update.
9986 * signals/signals.c (signals): Make array and struct members const.
9987 (target_signal_to_string): Make return type const char *.
9988 (target_signal_to_name): Ditto.
9989 (target_signal_from_name): Make arg const char *.
9991 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
9992 Tristan Gingold <gingold@adacore.com>
9994 * solist.h (struct target_so_ops): New member bfd_open.
9995 (solib_find): Add prototype.
9996 (solib_bfd_fopen): Add prototype.
9997 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
9998 from solib_bfd_open.
9999 (solib_bfd_open): Use ops->bfd_open override if present. Call
10000 solib_find and solib_bfd_open otherwise.
10002 * objfiles.h (OBJF_KEEPBFD): New define.
10003 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
10004 objfile flag is set.
10005 * solib.c (symbol_add_stub): Do not allocate second BFD for
10006 shared library; use OBJF_KEEPBFD flag on solib objfile.
10008 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10010 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
10012 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10014 * value.h (address_of_variable): Add prototype.
10015 (locate_var_value): Remove prototype.
10017 * findvar.c (read_var_value): Do not attempt to default frame
10019 (locate_var_value): Remove function.
10020 * valops.c (value_of_variable): Retrieve selected frame for
10021 symbols that require a frame when called with NULL block.
10022 * valops.c (address_of_variable): New function.
10024 * eval.c (evaluate_subexp_for_address): Call address_of_variable
10025 instead of calling locate_var_value.
10026 (evaluate_subexp_with_coercion): Likewise.
10028 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
10030 * NEWS: Document "define" for prefixed commands.
10031 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
10032 show_user_1 for prefix commands.
10033 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
10034 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
10035 commands. Return the containing command list.
10036 (define_command, document_command): Update to handle prefix commands.
10037 (show_user_1): Add prefix and name arguments. Handle prefix
10039 * cli/cli-script.h (show_user_1): Update prototype.
10041 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
10043 * ser-mingw.c (console_select_thread): Add return to make
10045 (pipe_select_thread): Likewise.
10046 (file_select_thread): Likewise.
10048 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10050 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
10053 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10055 * remote.c (extended_remote_mourn_1): Invalidate our notion of
10056 current general thread.
10058 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10060 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
10061 without a live selected thread.
10063 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10065 Update the copyright notice of some of the files I missed
10066 in the previous copyright update.
10068 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10070 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
10071 base address instead of casting it to DWORD.
10073 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
10075 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
10076 for NULL frame pointers.
10078 2009-01-13 Mark Kettenis <kettenis@gnu.org>
10080 * utils.c (host_address_to_string): Reimplement in a way that
10081 avoids the cast of the address to long.
10083 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10085 * mdebugread.c (parse_symbol): Save the symbol private data
10086 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
10087 (psymtab_to_symtab_1): Likewise.
10088 (parse_procedure): Declare variable "e" only in the scope
10089 where it is used. Extract the symbol private data using
10090 SYMBOL_VALUE_BYTES.
10092 2009-01-13 Jim Blandy <jimb@codesourcery.com>
10094 Abstract out common code for copying value locations.
10096 * value.h (set_value_component_location): New declaration.
10097 * value.c (set_value_component_location): New function.
10098 (value_primitive_field): Use it.
10099 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
10100 * valops.c (search_struct_field, value_slice): Same.
10101 * ada-lang.c (coerce_unspec_val_to_type)
10102 (ada_value_primitive_packed_val): Same.
10104 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10106 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
10108 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
10110 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
10112 * i386-cygwin-tdep.c: Ditto.
10113 * i386-windows-nat.c: Ditto.
10114 * windows-nat.h: Ditto.
10115 * windows-tdep.c: Ditto.
10116 * windows-tdep.h: Ditto.
10117 * windows-nat.c: Ditto.
10118 (cygwin_load_start): Redefine as CORE_ADDR.
10119 (cygwin_load_end): Ditto.
10120 (windows_make_so): Coerce result of address arithmetic to uintptr_t
10121 before coercing to CORE_ADDR to avoid a compiler warning.
10122 (handle_exception): Define addr as CORE_ADDR and coerce
10123 ExceptionAddress to uintptr_t before assigining to avoid a compiler
10125 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
10128 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10130 Fix linking with --enable-targets=all:
10131 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
10132 (HFILES_NO_SRCDIR): Add windows-tdep.h.
10133 (ALLDEPFILES): Add windows-tdep.c.
10135 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
10137 * win32-nat.h: Delete.
10138 * windows-nat.h: Rename from win32-nat.h.
10139 * win32-nat.c: Delete.
10140 * windows-nat.c: Rename from win32-nat.c.
10141 * win32-termcap.c: Delete.
10142 * windows-termcap.c: Rename from win32-termcap.c.
10143 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
10144 * configure.ac: Handle rename from win32-termcap.c ->
10146 * configure: Regenerate.
10147 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
10148 -> windows-termcap.c.
10149 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
10151 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
10152 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
10154 (win32_make_so): Handle cygwin compiler warning due to change of
10155 load_addr from DWORD to LPVOID.
10156 (handle_load_dll): Use %p in format string to properly print address
10157 and avoid a compiler warning.
10158 (DEBUG_EXCEPTION_SIMPLE): Ditto.
10159 (handle_exception): Ditto.
10160 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
10161 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
10163 * config/i386/mingw.mh: Ditto.
10164 * config/i386/mingw64.mh: Ditto.
10166 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10168 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
10169 arrayprint_recurse_level to a parameter. Update all the callers. New
10170 comment at autovariables.
10172 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10174 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
10177 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10179 * target.c (target_xfer_partial): Use host_address_to_string to
10180 print the address of readbuf and writebuf. Cast the address of
10181 elements inside the myaddr buffer into intptr_t.
10182 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
10183 Cast the address of elements inside the myaddr buffer into
10186 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10188 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
10189 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
10190 * configure.host, configure.tgt: Add handling for x86_64/windows.
10191 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
10192 and amd64-windows-tdep.c.
10194 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10196 * win32-tdep.h, win32-tdep.c: New files.
10197 * i386-cygwin-tdep.h: Delete.
10198 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
10199 i386-cygwin-tdep.h.
10200 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
10201 * win32-nat.c: Likewise.
10202 * configure.tgt: Add win32-tdep.o to the list of target object
10203 files for i386-cygwin and i386-mingw targets.
10205 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10207 * win32-nat.h: New file.
10208 * win32-nat.c (mappings): Initialize to NULL.
10209 (win32_set_context_register_offsets): New function.
10210 * i386-windows-nat.c: New file.
10211 (mappings): Moved here from win32-nat.c.
10212 (_initialize_i386_windows_nat): New function.
10213 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
10214 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
10216 2009-01-09 Andreas Schwab <schwab@suse.de>
10218 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
10220 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
10222 * gdbtypes.c (append_composite_type_field): Correct the location of
10225 2009-01-09 Pedro Alves <pedro@codesourcery.com>
10227 * defs.h (deprecated_error_hook): Delete declaration.
10228 * interps.c (clear_interpreter_hooks): Adjust.
10229 * remote-sim.c (gdb_os_error): Don't try to call
10230 deprecated_error_hook. No need to call exit anymore.
10231 * top.c (deprecated_error_hook): Delete.
10233 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10235 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
10236 to print the address of the gdbarch pointer.
10238 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10240 * gdbarch.sh: Fix all the compilation errors on amd64-windows
10241 due to casting a pointer to a long when printing a function
10242 address. Instead, use host_address_to_string to convert our
10243 address to a string.
10244 * gdbarch.c: Regenerate.
10246 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10248 * event-top.c (async_disconnect, async_stop_sig): use "raise"
10249 instead of "kill" to raise a signal.
10251 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10253 * win32-nat.c (get_module_name): Change the type of parameter
10254 "base_address" to LPVOID. Remove unnecessary cast.
10255 (struct lm_info): Change type of load_addr to LPVOID.
10256 (win32_make_so): Change the type of parameter "load_addr"
10257 to LPVOID. Remove some unnecessary casts.
10258 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
10259 (win32_xfer_shared_libraries): Add missing cast.
10261 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10263 * win32-nat.c (has_detach_ability, set_process_privilege):
10264 Cast the result of GetProcAddress to (void *) to avoid
10265 a compilation warning.
10267 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10269 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
10272 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10274 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
10275 definition of local variable "done".
10276 (info_w32_command, handle_exception): Remove unnecessary cast.
10278 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10280 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
10281 DebugSetProcessKillOnExit. Update all uses in this file.
10282 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
10283 Update all uses in this file.
10285 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10287 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
10288 and use it when pushing the target.
10289 (win32_attach, win32_create_inferior): Update call to
10290 do_initial_win32_stuff.
10291 (win32_detach, win32_mourn_inferior): Use our ops parameter
10292 instead of the global win32_ops to unpush the target.
10294 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10296 * ser-mingw.c (ser_windows_open): Use proper type when casting
10297 in call to _open_osfhandle.
10299 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
10301 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
10303 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10305 * CONTRIBUTE: Minor reformatting.
10307 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
10309 * MAINTAINERS: Add myself to Write After Approval.
10310 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
10313 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
10315 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
10316 Call exit to make it obvious to GCC.
10318 2009-01-08 Tom Tromey <tromey@redhat.com>
10320 PR breakpoints/9350:
10321 * varobj.c (varobj_invalidate): Unconditionally free
10323 * symfile.c (syms_from_objfile): Free local_addr when returning
10325 * exec.c (exec_file_attach): Do cleanups before returning.
10326 (exec_file_command): Likewise.
10327 * corefile.c (reopen_exec_file): Do cleanups before returning.
10328 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
10330 (do_vec_free): New function.
10331 (update_global_location_list): Make a cleanup for old_locations.
10332 Do cleanups before returning. Remove unused variable 'e'.
10333 (find_condition_and_thread): Free result of parsing the
10335 (print_it_typical): Do cleanups before returning.
10336 (breakpoint_re_set_one): Always free sals.sals.
10338 2009-01-08 Joel Brobecker <brobecker@adacore.com>
10339 Emi Suzuki <emi-suzuki@tjsys.co.jp>
10341 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
10344 2009-01-07 Doug Evans <dje@google.com>
10346 * top.c (gdb_prompt_string): Delete, unused.
10348 2009-01-07 Pedro Alves <pedro@codesourcery.com>
10350 Delete ONE_PROCESS_WRITETEXT leftovers.
10352 * breakpoint.c (insert_bp_location): Delete process_warning
10354 (insert_breakpoint_locations): Adjust.
10355 (reattach_breakpoints): Adjust.
10356 * infrun.c (normal_stop): Drop "It might be running in another
10359 2009-01-07 Stan Shebs <stan@codesourcery.com>
10361 * config/pa/linux.mh (XDEPFILES): Remove.
10363 2009-01-07 Doug Evans <dje@google.com>
10365 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
10367 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
10369 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
10370 spacing, a regression from 2008-04-22.
10372 2009-01-07 Joel Brobecker <brobecker@adacore.com>
10374 * utils.c (gdb_print_host_address): Adjust implementation to
10375 reuse host_address_to_string. Move comment explaining the conversion
10376 from host address to string from here...
10377 (host_address_to_string): ... to there.
10379 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
10381 * MAINTAINERS: Add myself for write after approval privileges.
10383 2009-01-06 Tom Tromey <tromey@redhat.com>
10385 * value.c (set_internalvar): Use value_free, not xfree.
10387 2009-01-06 Jim Blandy <jimb@red-bean.com>
10389 Check return values of functions declared with warn_unused_result
10390 attribute in GLIBC 2.8.
10391 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
10392 * inflow.c (check_syscall): New function.
10393 (new_tty): Use check_syscall to check return values from open and dup.
10394 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
10395 * main.c (captured_main): Call cwd after setting up gdb_stderr;
10396 check for errors from getcwd.
10397 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
10398 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
10399 (stdio_file_fputs): Same.
10400 * utils.c (internal_vproblem): abort if last-ditch error message
10403 * top.c (gdb_init): Don't set the current directory here; that's
10404 already been done in captured_main.
10406 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
10408 * ser-tcp.c: Adjust includes.
10409 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
10410 (tcp_auto_retry, tcp_retry_limit): Declare.
10411 (TIMEOUT): Remove, in favor of tcp_retry_limit.
10412 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
10413 (wait_for_connect): New function.
10414 (net_open): Use it. Add auto-retry logic.
10415 (set_tcp_cmd, show_tcp_cmd): New functions.
10416 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
10417 and "set/show tcp connect-timeout" commands.
10418 * NEWS: Document new commands.
10420 2009-01-05 Tom Tromey <tromey@redhat.com>
10422 * python/python-internal.h (Py_ssize_t): Define as int.
10424 2009-01-05 Jim Blandy <jimb@red-bean.com>
10426 * MAINTAINERS: Fix my e-mail address as steering committee member.
10428 2009-01-03 Joel Brobecker <brobecker@adacore.com>
10430 Updated copyright notices for most files.
10432 2009-01-03 Joel Brobecker <brobecker@adacore.com>
10434 * top.c (print_gdb_version): Update copyright year.
10436 2009-01-03 Joel Brobecker <brobecker@adacore.com>
10438 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
10440 2009-01-01 Pedro Alves <pedro@codesourcery.com>
10442 PR breakpoints/9681:
10443 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
10444 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
10445 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
10446 retrow all other exceptions.
10448 For older changes see ChangeLog-2008.
10454 version-control: never