1 ##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
3 # Makefile for GDB documentation.
4 # This file is part of GDB.
6 # This program is free software; you can redistribute it and/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation; either version 2 of the License, or
9 # (at your option) any later version.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License for more details.
16 # You should have received a copy of the GNU General Public License
17 # along with this program; if not, write to the Free Software
18 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
26 htmldir
= $(prefix)/html
33 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
34 INSTALL_DATA
= @INSTALL_DATA@
36 # main GDB source directory
39 # where to find texinfo; GDB dist should include a recent one
40 TEXIDIR
=${gdbdir}/..
/texinfo
42 # where to find makeinfo, preferably one designed for texinfo-2
45 # Note that texinfo 4.0's makeinfo --html can only generate a
46 # single file, which would be too large, so continue to use
47 # texi2html. -sts 2000-03-28
50 MAKEHTMLFLAGS
= -glossary
-menu
-split_chapter
52 # where to find texi2roff, ditto
55 # Where is the source dir for the READLINE library doc?
56 # Traditionally readline is in .. or .
57 READLINE_DIR
= ${gdbdir}/..
/readline
/doc
59 # The GDB/MI docs come from a sibling directory ../mi
60 GDBMI_DIR
= ${gdbdir}/mi
63 TEXINPUTS
=${TEXIDIR}:.
:$(srcdir):$(READLINE_DIR
):$(GDBMI_DIR
):$$TEXINPUTS
65 # There may be alternate predefined collections of switches to configure
66 # the GDB manual. Normally this is not done in synch with the software
67 # config system, since this choice tends to be independent; most people
68 # want a doc config of `all' for a generic manual, regardless of sw config.
71 # This list of sed edits will edit the GDB reference card
72 # for what fonts and what papersize to use.
73 # By default (NO edits applied), the refcard uses:
74 # - Computer Modern (CM) fonts
75 # - US letter paper (8.5x11in)
76 # List some of the following files for alternative fonts and paper:
77 # a4rc.sed use A4 paper (297 x 210 mm)
78 # psrc.sed use PostScript fonts (Karl Berry short TeX names)
79 # lpsrc.sed use PostScript fonts (full PostScript names in TeX)
80 # e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
81 # for A4, CM fonts: REFEDITS = a4rc.sed
82 # for US, PS fonts: REFEDITS = psrc.sed
86 # Don Knuth's TeX formatter
89 # auxiliary program for sorting Texinfo indices
92 # Program to generate Postscript files from DVI files.
95 # Program to generate PDF files from tex files.
98 # Main GDB manual's source files
99 SFILES_INCLUDED
= gdb-cfg.texi
$(srcdir)/annotate.texi
101 SFILES_LOCAL
= $(srcdir)/gdb.texinfo GDBvn.texi
$(SFILES_INCLUDED
)
103 SFILES_DOC
= $(SFILES_LOCAL
) $(GDBMI_DIR
)/gdbmi.texinfo \
104 $(READLINE_DIR
)/rluser.texinfo
$(READLINE_DIR
)/inc-hist.texinfo
106 #### Host, target, and site specific Makefile fragments come in here.
111 info: gdb.
info gdbint.
info stabs.
info
112 dvi: gdb.
dvi gdbint.
dvi stabs.
dvi refcard.
dvi
113 ps
: gdb.ps gdbint.ps stabs.ps refcard.ps
114 html
: gdb_toc.html gdbint_toc.html stabs_toc.html
115 pdf
: gdb.pdf gdbint.pdf stabs.pdf
116 all-doc
: info dvi ps
# pdf
120 $(SHELL
) $(srcdir)/..
/..
/mkinstalldirs
$(infodir)
121 for i in
*.
info* ; do \
122 $(INSTALL_DATA
) $$i $(infodir)/$$i ; \
124 @if
$(SHELL
) -c
'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev
/null
2>&1; then \
125 list
='gdb.info gdbint.info stabs.info'; \
126 for file in
$$list; do \
127 echo
" install-info --info-dir=$(infodir) $(infodir)/$$file";\
128 install-info
--info-dir
=$(infodir) $(infodir)/$$file ||
:;\
133 for i in
*.html
; do \
134 $(INSTALL_DATA
) $$i $(htmldir
)/$$i ; \
137 STAGESTUFF
= *.
info* gdb-all.texi GDBvn.texi
*.ps
*.
dvi *.pdf
139 # Copy the object files from a particular stage into a subdirectory.
142 -mv
$(STAGESTUFF
) stage1
146 -mv
$(STAGESTUFF
) stage2
150 -mv
$(STAGESTUFF
) stage3
155 for i in
$(STAGESTUFF
) ; do cmp
$$i $(against
)/$$i ; done
158 -(cd stage1
; mv
-f
* ..
)
162 -(cd stage2
; mv
-f
* ..
)
166 -(cd stage3
; mv
-f
* ..
)
169 # The "least clean" level of cleaning. Get rid of files which are
170 # automatically generated files that are just intermediate files,
173 rm -f gdb.mm gdb.ms gdb.me links2roff
174 rm -f
*.aux
*.cp
* *.fn
* *.ky
* *.log
*.pg
* *.toc
*.tp
* *.vr
*
175 rm -f sedref.
dvi sedref.
tex tmp.sed
178 rm -f rluser.texinfo inc-hist.texinfo gdb-cfg.texi
181 rm -f Makefile config.status
183 # GDBvn.texi, the dvi files, the info files, and the postscript files,
184 # are all part of the distribution, so it should not be removed by
185 # "clean" or "distclean". Use maintainer-clean to remove them.
187 maintainer-clean
realclean: distclean
188 rm -f GDBvn.texi
*.
info* *.
dvi *.ps
*.html
*.pdf
190 # GDB QUICK REFERENCE (dvi output)
191 refcard.
dvi : refcard.
tex $(REFEDITS
)
192 if
[ -z
"$(REFEDITS)" ]; then \
193 cp
$(srcdir)/refcard.
tex sedref.
tex ; \
196 for f in
$(REFEDITS
) ; do \
197 cat
$(srcdir)/$$f >>tmp.sed
; done
; \
198 sed
-f tmp.sed
$(srcdir)/refcard.
tex >sedref.
tex ; \
200 $(SET_TEXINPUTS
) $(TEX
) sedref.
tex
201 mv sedref.
dvi refcard.
dvi
202 rm -f sedref.log sedref.
tex tmp.sed
204 refcard.ps
: refcard.
dvi
205 $(DVIPS
) -t landscape
-o
$@
$?
207 # File to record current GDB version number (copied from main dir Makefile.in)
208 GDBvn.texi
: ${gdbdir}/Makefile.in
209 echo
"@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > .
/GDBvn.new
210 mv GDBvn.new GDBvn.texi
213 .PRECIOUS
: GDBvn.texi
215 # Choose configuration for GDB manual (normally `all'; normally not tied into
216 # `configure' script because most users prefer generic version of manual,
217 # not one for their binary config---which may not be specifically
219 gdb-cfg.texi
: ${srcdir}/${DOC_CONFIG}-cfg.texi
220 (test "$$LN_S" = "ln -s" && \
221 ln
-s
${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
) || \
222 ln
${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
223 cp
${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
225 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
226 # If your texinfo or makeinfo don't support these, get a new texinfo release
228 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
229 # Note that we can *generate* GDBvn.texi, but since we distribute one in the
230 # source directory for the benefit of people who *don't* use this makefile,
231 # VPATH will often tell make not to bother building it, because the one
232 # in the srcdir is up to date. (if not, then make should build one here).
234 # GDB MANUAL: TeX dvi file
235 gdb.
dvi: ${SFILES_DOC}
236 if
[ ! -f .
/GDBvn.texi
]; then \
237 (test "$$LN_S" = "ln -s" && ln
-s
$(srcdir)/GDBvn.texi .
) || \
238 ln
$(srcdir)/GDBvn.texi . || \
239 cp
$(srcdir)/GDBvn.texi .
; else true
; fi
240 $(SET_TEXINPUTS
) $(TEX
) gdb.texinfo
241 $(SET_TEXINPUTS
) $(TEX
) gdb.texinfo
243 $(SET_TEXINPUTS
) $(TEX
) gdb.texinfo
244 rm -f gdb.aux gdb.cp
* gdb.fn
* gdb.ky
* gdb.log gdb.pg
* gdb.toc \
250 gdb.pdf
: ${SFILES_DOC}
251 if
[ ! -f .
/GDBvn.texi
]; then \
252 (test "$$LN_S" = "ln -s" && ln
-s
$(srcdir)/GDBvn.texi .
) || \
253 ln
$(srcdir)/GDBvn.texi . || \
254 cp
$(srcdir)/GDBvn.texi .
; else true
; fi
255 $(SET_TEXINPUTS
) $(PDFTEX
) gdb.texinfo
256 $(SET_TEXINPUTS
) $(PDFTEX
) gdb.texinfo
258 $(SET_TEXINPUTS
) $(PDFTEX
) gdb.texinfo
259 rm -f gdb.aux gdb.cp
* gdb.fn
* gdb.ky
* gdb.log gdb.pg
* gdb.toc \
262 # GDB MANUAL: info file
263 # We're using texinfo 3.12; older makeinfo's may not be able to
264 # cope with all the markup.
265 gdb.
info: ${SFILES_DOC}
266 $(MAKEINFO
) -I
${READLINE_DIR} -I
${GDBMI_DIR} -I
$(srcdir) -o .
/gdb.
info gdb.texinfo
268 # GDB MANUAL: roff translations
269 # Try to use a recent texi2roff. v2 was put on prep in jan91.
270 # If you want an index, see texi2roff doc for postprocessing
271 # and add -i to texi2roff invocations below.
272 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
273 # corresponding -e lines when later texi2roff's are current)
274 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
275 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
276 # + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
277 # + @alphaenumerate is ridiculously new, turned into @enumerate
279 # texi2roff doesn't have a notion of include dirs, so we have to fake
280 # it out for gdb manual's include files---but only if not configured
282 links2roff
: $(SFILES_INCLUDED
)
283 if
[ ! -f gdb.texinfo
]; then \
284 (test "$$LN_S" = "ln -s" && ln
-s
$(SFILES_INCLUDED
) .
) || \
285 ln
$(SFILES_INCLUDED
) . || \
286 cp
$(SFILES_INCLUDED
) .
; \
290 # "Readline" appendices. Get them also due to lack of includes,
291 # regardless of whether or not configuring in main sourcedir.
292 # @ftable removed due to bug in texi2roff-2; if your texi2roff
293 # is newer, try just ln or cp
294 rluser.texinfo
: ${READLINE_DIR}/rluser.texinfo
295 sed
-e
's/^@ftable/@table/g' \
296 -e
's/^@end ftable/@end table/g' \
297 ${READLINE_DIR}/rluser.texinfo
> .
/rluser.texinfo
299 inc-hist.texinfo
: ${READLINE_DIR}/inc-hist.texinfo
300 (test "$$LN_S" = "ln -s" && \
301 ln
-s
${READLINE_DIR}/inc-hist.texinfo .
) || \
302 ln
${READLINE_DIR}/inc-hist.texinfo . || \
303 cp
${READLINE_DIR}/inc-hist.texinfo .
305 gdbmi.texinfo
: ${GDBMI_DIR}/gdbmi.texinfo
306 (test "$$LN_S" = "ln -s" && \
307 ln
-s
${GDBMI_DIR}/gdbmi.texinfo .
) || \
308 ln
${GDBMI_DIR}/gdbmi.texinfo . || \
309 cp
${GDBMI_DIR}/gdbmi.texinfo .
311 # gdb manual suitable for [gtn]roff -me
312 gdb.me
: $(SFILES_LOCAL
) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
313 sed
-e
'/\\input texinfo/d' \
314 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
315 -e
'/^@ifinfo/,/^@end ifinfo/d' \
319 -e
's/^@alphaenumerate/@enumerate/g' \
320 -e
's/^@end alphaenumerate/@end enumerate/g' \
321 $(srcdir)/gdb.texinfo | \
323 sed
-e
's/---/\\(em/g' \
326 # gdb manual suitable for [gtn]roff -ms
327 gdb.ms
: $(SFILES_LOCAL
) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
328 sed
-e
'/\\input texinfo/d' \
329 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
330 -e
'/^@ifinfo/,/^@end ifinfo/d' \
334 -e
's/^@alphaenumerate/@enumerate/g' \
335 -e
's/^@end alphaenumerate/@end enumerate/g' \
336 $(srcdir)/gdb.texinfo | \
338 sed
-e
's/---/\\(em/g' \
341 # gdb manual suitable for [tn]roff -mm
342 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
343 # try leaving them in
344 gdb.mm
: $(SFILES_LOCAL
) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
345 sed
-e
'/\\input texinfo/d' \
346 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
347 -e
'/^@ifinfo/,/^@end ifinfo/d' \
352 -e
's/^@alphaenumerate/@enumerate/g' \
353 -e
's/^@end alphaenumerate/@end enumerate/g' \
354 $(srcdir)/gdb.texinfo | \
356 sed
-e
's/---/\\(em/g' \
359 # GDB MANUAL: HTML file
361 gdb_toc.html
: ${SFILES_DOC}
362 $(MAKEHTML
) $(MAKEHTMLFLAGS
) -I
${READLINE_DIR} -I
${GDBMI_DIR} -I
$(srcdir) $(srcdir)/gdb.texinfo
364 # GDB GUI MANUAL: TeX dvi file
365 gdbgui.
dvi : gdbgui.texinfo
${SFILES_DOC}
366 $(SET_TEXINPUTS
) $(TEX
) gdbgui.texinfo
367 $(TEXINDEX
) gdbgui.??
368 $(SET_TEXINPUTS
) $(TEX
) gdbgui.texinfo
369 rm -f gdbgui.aux gdbgui.cp
* gdbgui.fn
* gdbgui.ky
* \
370 gdbgui.log gdbgui.pg
* gdbgui.toc gdbgui.tp
* gdbgui.vr
*
372 # GDB GUI MANUAL: info file
375 gdbgui.
info: gdbgui.texinfo
${SFILES_DOC}
376 $(MAKEINFO
) -o gdbgui.
info $(srcdir)/gdbgui.texinfo
378 # GDB INTERNALS MANUAL: TeX dvi file
379 gdbint.
dvi : gdbint.texinfo
380 $(SET_TEXINPUTS
) $(TEX
) gdbint.texinfo
381 $(TEXINDEX
) gdbint.??
382 $(SET_TEXINPUTS
) $(TEX
) gdbint.texinfo
383 rm -f gdbint.aux gdbint.cp
* gdbint.fn
* gdbint.ky
* \
384 gdbint.log gdbint.pg
* gdbint.toc gdbint.tp
* gdbint.vr
*
386 gdbint.ps
: gdbint.
dvi
389 gdbint.pdf
: gdbint.
dvi
390 $(SET_TEXINPUTS
) $(PDFTEX
) gdbint.texinfo
391 $(TEXINDEX
) gdbint.??
392 $(SET_TEXINPUTS
) $(PDFTEX
) gdbint.texinfo
393 rm -f gdbint.aux gdbint.cp
* gdbint.fn
* gdbint.ky
* \
394 gdbint.log gdbint.pg
* gdbint.toc gdbint.tp
* gdbint.vr
*
396 # GDB INTERNALS MANUAL: info file
398 gdbint.
info: gdbint.texinfo
399 $(MAKEINFO
) -o gdbint.
info $(srcdir)/gdbint.texinfo
401 # GDB INTERNALS MANUAL: HTML file
403 gdbint_toc.html
: gdbint.texinfo
404 $(MAKEHTML
) $(MAKEHTMLFLAGS
) $(srcdir)/gdbint.texinfo
406 stabs.
info: stabs.texinfo
407 $(MAKEINFO
) -o stabs.
info $(srcdir)/stabs.texinfo
409 # STABS DOCUMENTATION: HTML file
411 stabs_toc.html
: stabs.texinfo
412 $(MAKEHTML
) $(MAKEHTMLFLAGS
) $(srcdir)/stabs.texinfo
414 # STABS DOCUMENTATION: TeX dvi file
415 stabs.
dvi : stabs.texinfo
416 $(SET_TEXINPUTS
) $(TEX
) stabs.texinfo
418 $(SET_TEXINPUTS
) $(TEX
) stabs.texinfo
419 rm -f stabs.aux stabs.cp
* stabs.fn
* stabs.ky
* \
420 stabs.log stabs.pg
* stabs.toc stabs.tp
* stabs.vr
*
426 $(SET_TEXINPUTS
) $(PDFTEX
) stabs.texinfo
428 $(SET_TEXINPUTS
) $(PDFTEX
) stabs.texinfo
429 rm -f stabs.aux stabs.cp
* stabs.fn
* stabs.ky
* \
430 stabs.log stabs.pg
* stabs.toc stabs.tp
* stabs.vr
*
434 Makefile
: Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
) config.status
435 $(SHELL
) .
/config.status