gdb/doc/Makefile.in

   1 ##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003,
   2 ##2007 Free Software Foundation, Inc.
   3
   4 # Makefile for GDB documentation.
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  20
  21 srcdir = @srcdir@
  22 VPATH = @srcdir@
  23
  24 prefix = @prefix@
  25
  26 infodir = @infodir@
  27 htmldir = $(prefix)/html
  28
  29 SHELL = @SHELL@
  30
  31 LN_S = @LN_S@
  32
  33 INSTALL = @INSTALL@
  34 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  35 INSTALL_DATA = @INSTALL_DATA@
  36
  37 # main GDB source directory
  38 gdbdir = $(srcdir)/..
  39
  40 # where to find texinfo; GDB dist should include a recent one
  41 TEXIDIR=${gdbdir}/../texinfo
  42
  43 # where to find makeinfo, preferably one designed for texinfo-2
  44 MAKEINFO=makeinfo
  45
  46 # Note that texinfo 4.0's makeinfo --html can only generate a
  47 # single file, which would be too large, so continue to use
  48 # texi2html. -sts 2000-03-28
  49
  50 MAKEHTML = texi2html
  51 MAKEHTMLFLAGS = -menu -split_chapter
  52
  53 # where to find texi2roff, ditto
  54 TEXI2ROFF=texi2roff
  55
  56 # where to find texi2dvi, ditto
  57 TEXI2DVI=texi2dvi
  58
  59 # Where is the source dir for the READLINE library doc?
  60 # Traditionally readline is in .. or .
  61 READLINE_DIR = ${gdbdir}/../readline/doc
  62
  63 # The GDB/MI docs come from a sibling directory ../mi
  64 GDBMI_DIR = ${gdbdir}/mi
  65
  66 SET_TEXINPUTS = \
  67    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
  68
  69 # Files which should be generated via 'info' and installed by 'install-info'
  70 INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info
  71
  72 # There may be alternate predefined collections of switches to configure
  73 # the GDB manual.  Normally this is not done in synch with the software
  74 # config system, since this choice tends to be independent; most people
  75 # want a doc config of `all' for a generic manual, regardless of sw config.
  76 DOC_CONFIG = all
  77
  78 # This list of sed edits will edit the GDB reference card
  79 # for what fonts and what papersize to use.
  80 # By default (NO edits applied), the refcard uses:
  81 #    - Computer Modern (CM) fonts
  82 #    - US letter paper (8.5x11in)
  83 # List some of the following files for alternative fonts and paper:
  84 #  a4rc.sed     use A4 paper (297 x 210 mm)
  85 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  86 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  87 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
  88 #      for A4, CM fonts:    REFEDITS = a4rc.sed
  89 #      for US, PS fonts:    REFEDITS = psrc.sed
  90 #      for default:
  91 REFEDITS =
  92
  93 # Don Knuth's TeX formatter
  94 TEX = tex
  95
  96 # Program to generate Postscript files from DVI files.
  97 DVIPS = dvips
  98
  99 # Main GDB manual
 100 GDB_DOC_SOURCE_INCLUDES = \
 101         $(srcdir)/fdl.texi \
 102         $(srcdir)/gpl.texi \
 103         $(srcdir)/agentexpr.texi \
 104         $(READLINE_DIR)/rluser.texi \
 105         $(READLINE_DIR)/inc-hist.texinfo
 106 GDB_DOC_BUILD_INCLUDES = \
 107         gdb-cfg.texi \
 108         GDBvn.texi
 109 GDB_DOC_FILES = \
 110         $(srcdir)/gdb.texinfo \
 111         $(GDB_DOC_SOURCE_INCLUDES) \
 112         $(GDB_DOC_BUILD_INCLUDES)
 113
 114 # Internals Manual
 115 GDBINT_DOC_SOURCE_INCLUDES = \
 116         $(srcdir)/fdl.texi \
 117         $(srcdir)/observer.texi
 118 GDBINT_DOC_BUILD_INCLUDES = \
 119         gdb-cfg.texi \
 120         GDBvn.texi
 121 GDBINT_DOC_FILES = \
 122         $(srcdir)/gdbint.texinfo \
 123         $(GDBINT_DOC_SOURCE_INCLUDES) \
 124         $(GDBINT_DOC_BUILD_INCLUDES)
 125
 126 # Stabs manual: All files
 127 STABS_DOC_SOURCE_INCLUDES = \
 128         $(srcdir)/fdl.texi
 129 STABS_DOC_BUILD_INCLUDES =
 130 STABS_DOC_FILES = \
 131         $(srcdir)/stabs.texinfo \
 132         $(STABS_DOC_SOURCE_INCLUDES) \
 133         $(STABS_DOC_BUILD_INCLUDES)
 134
 135 # Annotate migration document
 136 ANNOTATE_DOC_SOURCE_INCLUDES = \
 137         $(srcdir)/fdl.texi
 138 ANNOTATE_DOC_BUILD_INCLUDES = \
 139         gdb-cfg.texi
 140 ANNOTATE_DOC_FILES = \
 141         $(srcdir)/annotate.texinfo \
 142         $(ANNOTATE_DOC_SOURCE_INCLUDES) \
 143         $(ANNOTATE_DOC_BUILD_INCLUDES)
 144
 145 #### Host, target, and site specific Makefile fragments come in here.
 146 ###
 147
 148 all:
 149
 150 info: $(INFO_DEPS)
 151 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
 152 ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
 153 html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html
 154 pdf: gdb.pdf gdbint.pdf stabs.pdf annotate.pdf
 155 all-doc: info dvi ps # pdf
 156 diststuff: info
 157
 158 install-info: $(INFO_DEPS)
 159         $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir)
 160         @list='$(INFO_DEPS)'; \
 161         for file in $$list; do \
 162           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 163           for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
 164             if test -f $$d/$$ifile; then \
 165               echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
 166               $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
 167             else : ; fi; \
 168           done; \
 169         done
 170         $(POST_INSTALL)
 171         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 172           list='$(INFO_DEPS)'; \
 173           for file in $$list; do \
 174             echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
 175             install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
 176           done; \
 177         else : ; fi
 178
 179 uninstall-info:
 180         $(PRE_UNINSTALL)
 181         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 182           ii=yes; \
 183         else ii=; fi; \
 184         list='$(INFO_DEPS)'; \
 185         for file in $$list; do \
 186           test -z "$$ii" \
 187             || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
 188         done
 189         $(NORMAL_UNINSTALL)
 190         list='$(INFO_DEPS)'; \
 191         for file in $$list; do \
 192           (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
 193         done
 194
 195 install-html: html
 196         for i in *.html ; do \
 197                 $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
 198         done
 199
 200 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
 201
 202 # Copy the object files from a particular stage into a subdirectory.
 203 stage1: force
 204         -mkdir stage1
 205         -mv $(STAGESTUFF) stage1
 206
 207 stage2: force
 208         -mkdir stage2
 209         -mv $(STAGESTUFF) stage2
 210
 211 stage3: force
 212         -mkdir stage3
 213         -mv $(STAGESTUFF) stage3
 214
 215 against=stage2
 216
 217 comparison: force
 218         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 219
 220 de-stage1: force
 221         -(cd stage1 ; mv -f * ..)
 222         -rmdir stage1
 223
 224 de-stage2: force
 225         -(cd stage2 ; mv -f * ..)
 226         -rmdir stage2
 227
 228 de-stage3: force
 229         -(cd stage3 ; mv -f * ..)
 230         -rmdir stage3
 231
 232 # GDB QUICK REFERENCE (dvi output)
 233 refcard.dvi : refcard.tex $(REFEDITS)
 234         echo > tmp.sed
 235         for f in x $(REFEDITS) ; do \
 236                 test x$$f = xx && continue ; \
 237                 cat $(srcdir)/$$f >>tmp.sed ; \
 238         done
 239         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 240         $(SET_TEXINPUTS) $(TEX) sedref.tex
 241         mv sedref.dvi refcard.dvi
 242         rm -f sedref.log sedref.tex tmp.sed
 243
 244 refcard.ps : refcard.dvi
 245         $(DVIPS) -t landscape -o $@ $?
 246
 247 # File to record current GDB version number (copied from main dir version.in)
 248 GDBvn.texi : ${gdbdir}/version.in
 249         echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
 250         mv GDBvn.new GDBvn.texi
 251
 252 # Updated atomically
 253 .PRECIOUS: GDBvn.texi
 254
 255 # Choose configuration for GDB manual (normally `all'; normally not tied into
 256 # `configure' script because most users prefer generic version of manual,
 257 # not one for their binary config---which may not be specifically
 258 # defined anyways).
 259 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 260         (test "$(LN_S)" = "ln -s" && \
 261           ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 262         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 263         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 264
 265 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 266 # If your texinfo or makeinfo don't support these, get a new texinfo release
 267 #
 268 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 269 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 270 #   source directory for the benefit of people who *don't* use this makefile,
 271 #   VPATH will often tell make not to bother building it, because the one
 272 #   in the srcdir is up to date.  (if not, then make should build one here).
 273
 274 # Clean these up before each run.  Avoids a catch 22 with not being
 275 # able to re-generate these files (to fix a corruption) because these
 276 # files contain a corruption.
 277 GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 278         gdb.tp* gdb.vr*
 279
 280 # GDB MANUAL: TeX dvi file
 281 gdb.dvi: ${GDB_DOC_FILES}
 282         if [ ! -f ./GDBvn.texi ]; then \
 283                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 284                 ln $(srcdir)/GDBvn.texi . || \
 285                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 286         rm -f $(GDB_TEX_TMPS)
 287         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
 288
 289 gdb.ps: gdb.dvi
 290         $(DVIPS) -o $@ $?
 291
 292 gdb.pdf: ${GDB_DOC_FILES}
 293         if [ ! -f ./GDBvn.texi ]; then \
 294                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 295                 ln $(srcdir)/GDBvn.texi . || \
 296                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 297         rm -f $(GDB_TEX_TMPS)
 298         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
 299
 300 # GDB MANUAL: info file
 301 gdb.info: ${GDB_DOC_FILES}
 302         $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
 303                 -o gdb.info $(srcdir)/gdb.texinfo
 304
 305 # GDB MANUAL: roff translations
 306 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 307 # If you want an index, see texi2roff doc for postprocessing
 308 # and add -i to texi2roff invocations below.
 309 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 310 #    corresponding -e lines when later texi2roff's are current)
 311 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 312 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 313 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 314 # + @alphaenumerate is ridiculously new, turned into @enumerate
 315
 316 # texi2roff doesn't have a notion of include dirs, so we have to fake
 317 # it out for gdb manual's include files---but only if not configured
 318 # in main sourcedir.
 319 links2roff: $(GDB_DOC_SOURCE_INCLUDES)
 320         if [ ! -f gdb.texinfo ]; then \
 321                 (test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
 322                 ln $(GDB_DOC_SOURCE_INCLUDES)    . || \
 323                 cp $(GDB_DOC_SOURCE_INCLUDES)    . ; \
 324         fi
 325         touch links2roff
 326
 327 # gdb manual suitable for [gtn]roff -me
 328 gdb.me: $(GDB_DOC_FILES) links2roff
 329         sed -e '/\\input texinfo/d' \
 330                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 331                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 332                 -e '/^@c /d' \
 333                 -e 's/{.*,,/{/' \
 334                 -e 's/@ / /g' \
 335                 -e 's/^@alphaenumerate/@enumerate/g' \
 336                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 337                 $(srcdir)/gdb.texinfo | \
 338         $(TEXI2ROFF) -me | \
 339         sed -e 's/---/\\(em/g' \
 340         >gdb.me
 341
 342 # gdb manual suitable for [gtn]roff -ms
 343 gdb.ms: $(GDB_DOC_FILES) links2roff
 344         sed -e '/\\input texinfo/d' \
 345                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 346                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 347                 -e '/^@c /d' \
 348                 -e 's/{.*,,/{/' \
 349                 -e 's/@ / /g' \
 350                 -e 's/^@alphaenumerate/@enumerate/g' \
 351                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 352                 $(srcdir)/gdb.texinfo | \
 353         $(TEXI2ROFF) -ms | \
 354         sed -e 's/---/\\(em/g' \
 355         >gdb.ms
 356
 357 # gdb manual suitable for [tn]roff -mm
 358 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 359 #   try leaving them in
 360 gdb.mm: $(GDB_DOC_FILES) links2roff
 361         sed -e '/\\input texinfo/d' \
 362                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 363                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 364                 -e '/^@c /d' \
 365                 -e 's/{.*,,/{/' \
 366                 -e '/@noindent/d' \
 367                 -e 's/@ / /g' \
 368                 -e 's/^@alphaenumerate/@enumerate/g' \
 369                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 370                 $(srcdir)/gdb.texinfo | \
 371         $(TEXI2ROFF) -mm | \
 372         sed -e 's/---/\\(em/g' \
 373         >gdb.mm
 374
 375 # GDB MANUAL: HTML file
 376
 377 gdb_toc.html: ${GDB_DOC_FILES}
 378         $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
 379
 380 # Clean these up before each run.  Avoids a catch 22 with not being
 381 # able to re-generate these files (to fix a corruption) because these
 382 # files contain a corruption.
 383 GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 384         gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 385
 386 # GDB INTERNALS MANUAL: TeX dvi file
 387 gdbint.dvi: $(GDBINT_DOC_FILES)
 388         rm -f $(GDBINT_TEX_TMPS)
 389         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
 390
 391 gdbint.ps : gdbint.dvi
 392         $(DVIPS) -o $@ $?
 393
 394 gdbint.pdf: $(GDBINT_DOC_FILES)
 395         rm -f $(GDBINT_TEX_TMPS)
 396         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
 397
 398 # GDB INTERNALS MANUAL: info file
 399
 400 gdbint.info: $(GDBINT_DOC_FILES)
 401         $(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
 402
 403 # GDB INTERNALS MANUAL: HTML file
 404
 405 gdbint_toc.html: $(GDBINT_DOC_FILES)
 406         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
 407
 408 stabs.info: $(STABS_DOC_FILES)
 409         $(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo
 410
 411 # STABS DOCUMENTATION: HTML file
 412
 413 stabs_toc.html: $(STABS_DOC_FILES)
 414         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
 415
 416 # Clean these up before each run.  Avoids a catch 22 with not being
 417 # able to re-generate these files (to fix a corruption) because these
 418 # files contain a corruption.
 419 STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 420         stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 421
 422 # STABS DOCUMENTATION: TeX dvi file
 423 stabs.dvi : $(STABS_DOC_FILES)
 424         rm -f $(STABS_TEX_TMPS)
 425         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
 426
 427 stabs.ps: stabs.dvi
 428         $(DVIPS) -o $@ $?
 429
 430 stabs.pdf: $(STABS_DOC_FILES)
 431         rm -f $(STABS_TEX_TMPS)
 432         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
 433
 434 # Clean these up before each run.  Avoids a catch 22 with not being
 435 # able to re-generate these files (to fix a corruption) because these
 436 # files contain a corruption.
 437 ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \
 438         annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr*
 439
 440 # ANNOTATE DOCUMENTATION: TeX dvi file
 441 annotate.dvi : $(ANNOTATE_DOC_FILES)
 442         rm -f $(ANNOTATE_TEX_TMPS)
 443         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo
 444
 445 annotate.ps: annotate.dvi
 446         $(DVIPS) -o $@ $?
 447
 448 annotate.pdf: $(ANNOTATE_DOC_FILES)
 449         rm -f $(ANNOTATE_TEX_TMPS)
 450         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo
 451
 452 annotate.info: $(ANNOTATE_DOC_FILES)
 453         $(MAKEINFO)  -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo
 454
 455 annotate_toc.html: $(ANNOTATE_DOC_FILES)
 456         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo
 457
 458 force:
 459
 460 Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
 461         $(SHELL) ./config.status
 462
 463
 464 # The "least clean" level of cleaning.  Get rid of files which are
 465 # automatically generated files that are just intermediate files,
 466
 467 mostlyclean:
 468         rm -f gdb.mm gdb.ms gdb.me links2roff
 469         rm -f $(GDB_TEX_TMPS)
 470         rm -f $(GDBINT_TEX_TMPS)
 471         rm -f $(STABS_TEX_TMPS)
 472         rm -f $(ANNOTATE_TEX_TMPS)
 473         rm -f sedref.dvi sedref.tex tmp.sed
 474
 475 clean: mostlyclean
 476         rm -f gdb-cfg.texi
 477
 478 distclean: clean
 479         rm -f Makefile config.status config.log
 480
 481 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 482 # are all part of the distribution, so it should not be removed by
 483 # "clean" or "distclean".  Use maintainer-clean to remove them.
 484
 485 maintainer-clean realclean: distclean
 486         rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
 487
 488 install: install-info
 489
 490 uninstall: uninstall-info