gdb/doc/Makefile.in

   1 ##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
   2
   3 # Makefile for GDB documentation.
   4 # This file is part of GDB.
   5
   6 # This program is free software; you can redistribute it and/or modify
   7 # it under the terms of the GNU General Public License as published by
   8 # the Free Software Foundation; either version 2 of the License, or
   9 # (at your option) any later version.
  10 #
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 # GNU General Public License for more details.
  15 #
  16 # You should have received a copy of the GNU General Public License
  17 # along with this program; if not, write to the Free Software
  18 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19
  20 srcdir = @srcdir@
  21 VPATH = @srcdir@
  22
  23 prefix = @prefix@
  24
  25 infodir = @infodir@
  26 htmldir = $(prefix)/html
  27
  28 SHELL = @SHELL@
  29
  30 LN_S = @LN_S@
  31
  32 INSTALL = @INSTALL@
  33 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  34 INSTALL_DATA = @INSTALL_DATA@
  35
  36 # main GDB source directory
  37 gdbdir = $(srcdir)/..
  38
  39 # where to find texinfo; GDB dist should include a recent one
  40 TEXIDIR=${gdbdir}/../texinfo
  41
  42 # where to find makeinfo, preferably one designed for texinfo-2
  43 MAKEINFO=makeinfo
  44
  45 # Note that texinfo 4.0's makeinfo --html can only generate a
  46 # single file, which would be too large, so continue to use
  47 # texi2html. -sts 2000-03-28
  48
  49 MAKEHTML = texi2html
  50 MAKEHTMLFLAGS = -glossary -menu -split_chapter
  51
  52 # where to find texi2roff, ditto
  53 TEXI2ROFF=texi2roff
  54
  55 # Where is the source dir for the READLINE library doc?
  56 # Traditionally readline is in .. or .
  57 READLINE_DIR = ${gdbdir}/../readline/doc
  58
  59 # The GDB/MI docs come from a sibling directory ../mi
  60 GDBMI_DIR = ${gdbdir}/mi
  61
  62 SET_TEXINPUTS = \
  63    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
  64
  65 # There may be alternate predefined collections of switches to configure
  66 # the GDB manual.  Normally this is not done in synch with the software
  67 # config system, since this choice tends to be independent; most people
  68 # want a doc config of `all' for a generic manual, regardless of sw config.
  69 DOC_CONFIG = all
  70
  71 # This list of sed edits will edit the GDB reference card
  72 # for what fonts and what papersize to use.
  73 # By default (NO edits applied), the refcard uses:
  74 #    - Computer Modern (CM) fonts
  75 #    - US letter paper (8.5x11in)
  76 # List some of the following files for alternative fonts and paper:
  77 #  a4rc.sed     use A4 paper (297 x 210 mm)
  78 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  79 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  80 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
  81 #      for A4, CM fonts:    REFEDITS = a4rc.sed
  82 #      for US, PS fonts:    REFEDITS = psrc.sed
  83 #      for default:
  84 REFEDITS =
  85
  86 # Don Knuth's TeX formatter
  87 TEX = tex
  88
  89 # auxiliary program for sorting Texinfo indices
  90 TEXINDEX = texindex
  91
  92 # Program to generate Postscript files from DVI files.
  93 DVIPS = dvips
  94
  95 # Main GDB manual's source files
  96 SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/annotate.texi
  97
  98 SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
  99
 100 SFILES_DOC = $(SFILES_LOCAL) $(GDBMI_DIR)/gdbmi.texinfo \
 101                 $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texinfo
 102
 103 #### Host, target, and site specific Makefile fragments come in here.
 104 ###
 105
 106 all install:
 107
 108 info: gdb.info gdbint.info stabs.info
 109 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
 110 ps: gdb.ps gdbint.ps stabs.ps refcard.ps
 111 html: gdb_toc.html gdbint_toc.html stabs_toc.html
 112 all-doc: info dvi ps
 113 diststuff: info
 114
 115 install-info: info
 116         $(SHELL) $(srcdir)/../../mkinstalldirs $(infodir)
 117         for i in *.info* ; do \
 118                 $(INSTALL_DATA) $$i $(infodir)/$$i ; \
 119         done
 120         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 121           list='gdb.info gdbint.info stabs.info'; \
 122           for file in $$list; do \
 123             echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
 124             install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
 125           done; \
 126         else : ; fi
 127
 128 install-html: html
 129         for i in *.html ; do \
 130                 $(INSTALL_DATA) $$i $(htmldir)/$$i ; \
 131         done
 132
 133 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi
 134
 135 # Copy the object files from a particular stage into a subdirectory.
 136 stage1: force
 137         -mkdir stage1
 138         -mv $(STAGESTUFF) stage1
 139
 140 stage2: force
 141         -mkdir stage2
 142         -mv $(STAGESTUFF) stage2
 143
 144 stage3: force
 145         -mkdir stage3
 146         -mv $(STAGESTUFF) stage3
 147
 148 against=stage2
 149
 150 comparison: force
 151         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 152
 153 de-stage1: force
 154         -(cd stage1 ; mv -f * ..)
 155         -rmdir stage1
 156
 157 de-stage2: force
 158         -(cd stage2 ; mv -f * ..)
 159         -rmdir stage2
 160
 161 de-stage3: force
 162         -(cd stage3 ; mv -f * ..)
 163         -rmdir stage3
 164
 165 # The "least clean" level of cleaning.  Get rid of files which are
 166 # automatically generated files that are just intermediate files,
 167 #
 168 mostlyclean:
 169         rm -f gdb.mm gdb.ms gdb.me links2roff
 170         rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
 171         rm -f sedref.dvi sedref.tex tmp.sed
 172
 173 clean: mostlyclean
 174         rm -f rluser.texinfo inc-hist.texinfo gdb-cfg.texi
 175
 176 distclean: clean
 177         rm -f Makefile config.status
 178
 179 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 180 # are all part of the distribution, so it should not be removed by
 181 # "clean" or "distclean".  Use maintainer-clean to remove them.
 182
 183 maintainer-clean realclean: distclean
 184         rm -f GDBvn.texi *.info* *.dvi *.ps *.html
 185
 186 # GDB QUICK REFERENCE (dvi output)
 187 refcard.dvi : refcard.tex $(REFEDITS)
 188         if [ -z "$(REFEDITS)" ]; then \
 189                 cp $(srcdir)/refcard.tex sedref.tex ; \
 190         else \
 191                 echo > tmp.sed ; \
 192                 for f in $(REFEDITS) ; do \
 193                         cat $(srcdir)/$$f >>tmp.sed ; done ; \
 194                 sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
 195         fi
 196         $(SET_TEXINPUTS) $(TEX) sedref.tex
 197         mv sedref.dvi refcard.dvi
 198         rm -f sedref.log sedref.tex tmp.sed
 199
 200 refcard.ps : refcard.dvi
 201         $(DVIPS) -t landscape -o $@ $?
 202
 203 # File to record current GDB version number (copied from main dir Makefile.in)
 204 GDBvn.texi : ${gdbdir}/Makefile.in
 205         echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > ./GDBvn.new
 206         mv GDBvn.new GDBvn.texi
 207
 208 # Updated atomically
 209 .PRECIOUS: GDBvn.texi
 210
 211 # Choose configuration for GDB manual (normally `all'; normally not tied into
 212 # `configure' script because most users prefer generic version of manual,
 213 # not one for their binary config---which may not be specifically
 214 # defined anyways).
 215 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 216         (test "$$LN_S" = "ln -s" && \
 217           ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 218         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 219         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 220
 221 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 222 # If your texinfo or makeinfo don't support these, get a new texinfo release
 223 #
 224 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 225 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 226 #   source directory for the benefit of people who *don't* use this makefile,
 227 #   VPATH will often tell make not to bother building it, because the one
 228 #   in the srcdir is up to date.  (if not, then make should build one here).
 229
 230 # GDB MANUAL: TeX dvi file
 231 gdb.dvi: ${SFILES_DOC}
 232         if [ ! -f ./GDBvn.texi ]; then \
 233                 (test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 234                 ln $(srcdir)/GDBvn.texi . || \
 235                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 236         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 237         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 238         $(TEXINDEX) gdb.??
 239         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 240         rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 241                 gdb.tp* gdb.vr*
 242
 243 gdb.ps: gdb.dvi
 244         $(DVIPS) -o $@ $?
 245
 246 # GDB MANUAL: info file
 247 # We're using texinfo 3.12; older makeinfo's may not be able to
 248 # cope with all the markup.
 249 gdb.info: ${SFILES_DOC}
 250         $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
 251
 252 # GDB MANUAL: roff translations
 253 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 254 # If you want an index, see texi2roff doc for postprocessing
 255 # and add -i to texi2roff invocations below.
 256 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 257 #    corresponding -e lines when later texi2roff's are current)
 258 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 259 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 260 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 261 # + @alphaenumerate is ridiculously new, turned into @enumerate
 262
 263 # texi2roff doesn't have a notion of include dirs, so we have to fake
 264 # it out for gdb manual's include files---but only if not configured
 265 # in main sourcedir.
 266 links2roff: $(SFILES_INCLUDED)
 267         if [ ! -f gdb.texinfo ]; then \
 268                 (test "$$LN_S" = "ln -s" && ln -s $(SFILES_INCLUDED) .) || \
 269                 ln $(SFILES_INCLUDED)    . || \
 270                 cp $(SFILES_INCLUDED)    . ; \
 271         fi
 272         touch links2roff
 273
 274 #  "Readline" appendices.  Get them also due to lack of includes,
 275 # regardless of whether or not configuring in main sourcedir.
 276 # @ftable removed due to bug in texi2roff-2; if your texi2roff
 277 # is newer, try just ln or cp
 278 rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
 279                 sed -e 's/^@ftable/@table/g' \
 280                 -e 's/^@end ftable/@end table/g' \
 281                 ${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
 282
 283 inc-hist.texinfo: ${READLINE_DIR}/inc-hist.texinfo
 284         (test "$$LN_S" = "ln -s" && \
 285          ln -s ${READLINE_DIR}/inc-hist.texinfo .) || \
 286         ln ${READLINE_DIR}/inc-hist.texinfo . || \
 287         cp ${READLINE_DIR}/inc-hist.texinfo .
 288
 289 gdbmi.texinfo: ${GDBMI_DIR}/gdbmi.texinfo
 290         (test "$$LN_S" = "ln -s" && \
 291          ln -s ${GDBMI_DIR}/gdbmi.texinfo .) || \
 292         ln ${GDBMI_DIR}/gdbmi.texinfo . || \
 293         cp ${GDBMI_DIR}/gdbmi.texinfo .
 294
 295 # gdb manual suitable for [gtn]roff -me
 296 gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
 297         sed -e '/\\input texinfo/d' \
 298                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 299                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 300                 -e '/^@c /d' \
 301                 -e 's/{.*,,/{/' \
 302                 -e 's/@ / /g' \
 303                 -e 's/^@alphaenumerate/@enumerate/g' \
 304                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 305                 $(srcdir)/gdb.texinfo | \
 306         $(TEXI2ROFF) -me | \
 307         sed -e 's/---/\\(em/g' \
 308         >gdb.me
 309
 310 # gdb manual suitable for [gtn]roff -ms
 311 gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
 312         sed -e '/\\input texinfo/d' \
 313                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 314                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 315                 -e '/^@c /d' \
 316                 -e 's/{.*,,/{/' \
 317                 -e 's/@ / /g' \
 318                 -e 's/^@alphaenumerate/@enumerate/g' \
 319                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 320                 $(srcdir)/gdb.texinfo | \
 321         $(TEXI2ROFF) -ms | \
 322         sed -e 's/---/\\(em/g' \
 323         >gdb.ms
 324
 325 # gdb manual suitable for [tn]roff -mm
 326 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 327 #   try leaving them in
 328 gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
 329         sed -e '/\\input texinfo/d' \
 330                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 331                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 332                 -e '/^@c /d' \
 333                 -e 's/{.*,,/{/' \
 334                 -e '/@noindent/d' \
 335                 -e 's/@ / /g' \
 336                 -e 's/^@alphaenumerate/@enumerate/g' \
 337                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 338                 $(srcdir)/gdb.texinfo | \
 339         $(TEXI2ROFF) -mm | \
 340         sed -e 's/---/\\(em/g' \
 341         >gdb.mm
 342
 343 # GDB MANUAL: HTML file
 344
 345 gdb_toc.html: ${SFILES_DOC}
 346         $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
 347
 348 # GDB GUI MANUAL: TeX dvi file
 349 gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
 350         $(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
 351         $(TEXINDEX) gdbgui.??
 352         $(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
 353         rm -f gdbgui.aux gdbgui.cp* gdbgui.fn* gdbgui.ky* \
 354                 gdbgui.log gdbgui.pg* gdbgui.toc gdbgui.tp* gdbgui.vr*
 355
 356 # GDB GUI MANUAL: info file
 357 gdb-gui: gdbgui.info
 358
 359 gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
 360         $(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo
 361
 362 # GDB INTERNALS MANUAL: TeX dvi file
 363 gdbint.dvi : gdbint.texinfo
 364         $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
 365         $(TEXINDEX) gdbint.??
 366         $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
 367         rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 368                 gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 369
 370 gdbint.ps : gdbint.dvi
 371         $(DVIPS) -o $@ $?
 372
 373 # GDB INTERNALS MANUAL: info file
 374
 375 gdbint.info: gdbint.texinfo
 376         $(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
 377
 378 # GDB INTERNALS MANUAL: HTML file
 379
 380 gdbint_toc.html: gdbint.texinfo
 381         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
 382
 383 stabs.info: stabs.texinfo
 384         $(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
 385
 386 # STABS DOCUMENTATION: HTML file
 387
 388 stabs_toc.html: stabs.texinfo
 389         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
 390
 391 # STABS DOCUMENTATION: TeX dvi file
 392 stabs.dvi : stabs.texinfo
 393         $(SET_TEXINPUTS) $(TEX) stabs.texinfo
 394         $(TEXINDEX) stabs.??
 395         $(SET_TEXINPUTS) $(TEX) stabs.texinfo
 396         rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 397                 stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 398
 399 stabs.ps: stabs.dvi
 400         $(DVIPS) -o $@ $?
 401
 402 force:
 403
 404 Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
 405         $(SHELL) ./config.status