* alpha-tdep.c (alpha_register_type): Use builtin_type (gdbarch)
[deliverable/binutils-gdb.git] / gdb / s390-tdep.c
1 /* Target-dependent code for GDB, the GNU debugger.
2
3 Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
4 Free Software Foundation, Inc.
5
6 Contributed by D.J. Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
7 for IBM Deutschland Entwicklung GmbH, IBM Corporation.
8
9 This file is part of GDB.
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 3 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program. If not, see <http://www.gnu.org/licenses/>. */
23
24 #include "defs.h"
25 #include "arch-utils.h"
26 #include "frame.h"
27 #include "inferior.h"
28 #include "symtab.h"
29 #include "target.h"
30 #include "gdbcore.h"
31 #include "gdbcmd.h"
32 #include "objfiles.h"
33 #include "floatformat.h"
34 #include "regcache.h"
35 #include "trad-frame.h"
36 #include "frame-base.h"
37 #include "frame-unwind.h"
38 #include "dwarf2-frame.h"
39 #include "reggroups.h"
40 #include "regset.h"
41 #include "value.h"
42 #include "gdb_assert.h"
43 #include "dis-asm.h"
44 #include "solib-svr4.h"
45 #include "prologue-value.h"
46
47 #include "s390-tdep.h"
48
49
50 /* The tdep structure. */
51
52 struct gdbarch_tdep
53 {
54 /* ABI version. */
55 enum { ABI_LINUX_S390, ABI_LINUX_ZSERIES } abi;
56
57 /* Core file register sets. */
58 const struct regset *gregset;
59 int sizeof_gregset;
60
61 const struct regset *fpregset;
62 int sizeof_fpregset;
63 };
64
65
66 /* Return the name of register REGNUM. */
67 static const char *
68 s390_register_name (struct gdbarch *gdbarch, int regnum)
69 {
70 static const char *register_names[S390_NUM_TOTAL_REGS] =
71 {
72 /* Program Status Word. */
73 "pswm", "pswa",
74 /* General Purpose Registers. */
75 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
76 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
77 /* Access Registers. */
78 "acr0", "acr1", "acr2", "acr3", "acr4", "acr5", "acr6", "acr7",
79 "acr8", "acr9", "acr10", "acr11", "acr12", "acr13", "acr14", "acr15",
80 /* Floating Point Control Word. */
81 "fpc",
82 /* Floating Point Registers. */
83 "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
84 "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
85 /* Pseudo registers. */
86 "pc", "cc",
87 };
88
89 gdb_assert (regnum >= 0 && regnum < S390_NUM_TOTAL_REGS);
90 return register_names[regnum];
91 }
92
93 /* Return the GDB type object for the "standard" data type of data in
94 register REGNUM. */
95 static struct type *
96 s390_register_type (struct gdbarch *gdbarch, int regnum)
97 {
98 if (regnum == S390_PSWM_REGNUM || regnum == S390_PSWA_REGNUM)
99 return builtin_type (gdbarch)->builtin_long;
100 if (regnum >= S390_R0_REGNUM && regnum <= S390_R15_REGNUM)
101 return builtin_type (gdbarch)->builtin_long;
102 if (regnum >= S390_A0_REGNUM && regnum <= S390_A15_REGNUM)
103 return builtin_type (gdbarch)->builtin_int;
104 if (regnum == S390_FPC_REGNUM)
105 return builtin_type (gdbarch)->builtin_int;
106 if (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM)
107 return builtin_type (gdbarch)->builtin_double;
108 if (regnum == S390_PC_REGNUM)
109 return builtin_type (gdbarch)->builtin_func_ptr;
110 if (regnum == S390_CC_REGNUM)
111 return builtin_type (gdbarch)->builtin_int;
112
113 internal_error (__FILE__, __LINE__, _("invalid regnum"));
114 }
115
116 /* DWARF Register Mapping. */
117
118 static int s390_dwarf_regmap[] =
119 {
120 /* General Purpose Registers. */
121 S390_R0_REGNUM, S390_R1_REGNUM, S390_R2_REGNUM, S390_R3_REGNUM,
122 S390_R4_REGNUM, S390_R5_REGNUM, S390_R6_REGNUM, S390_R7_REGNUM,
123 S390_R8_REGNUM, S390_R9_REGNUM, S390_R10_REGNUM, S390_R11_REGNUM,
124 S390_R12_REGNUM, S390_R13_REGNUM, S390_R14_REGNUM, S390_R15_REGNUM,
125
126 /* Floating Point Registers. */
127 S390_F0_REGNUM, S390_F2_REGNUM, S390_F4_REGNUM, S390_F6_REGNUM,
128 S390_F1_REGNUM, S390_F3_REGNUM, S390_F5_REGNUM, S390_F7_REGNUM,
129 S390_F8_REGNUM, S390_F10_REGNUM, S390_F12_REGNUM, S390_F14_REGNUM,
130 S390_F9_REGNUM, S390_F11_REGNUM, S390_F13_REGNUM, S390_F15_REGNUM,
131
132 /* Control Registers (not mapped). */
133 -1, -1, -1, -1, -1, -1, -1, -1,
134 -1, -1, -1, -1, -1, -1, -1, -1,
135
136 /* Access Registers. */
137 S390_A0_REGNUM, S390_A1_REGNUM, S390_A2_REGNUM, S390_A3_REGNUM,
138 S390_A4_REGNUM, S390_A5_REGNUM, S390_A6_REGNUM, S390_A7_REGNUM,
139 S390_A8_REGNUM, S390_A9_REGNUM, S390_A10_REGNUM, S390_A11_REGNUM,
140 S390_A12_REGNUM, S390_A13_REGNUM, S390_A14_REGNUM, S390_A15_REGNUM,
141
142 /* Program Status Word. */
143 S390_PSWM_REGNUM,
144 S390_PSWA_REGNUM
145 };
146
147 /* Convert DWARF register number REG to the appropriate register
148 number used by GDB. */
149 static int
150 s390_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
151 {
152 int regnum = -1;
153
154 if (reg >= 0 && reg < ARRAY_SIZE (s390_dwarf_regmap))
155 regnum = s390_dwarf_regmap[reg];
156
157 if (regnum == -1)
158 warning (_("Unmapped DWARF Register #%d encountered."), reg);
159
160 return regnum;
161 }
162
163 /* Pseudo registers - PC and condition code. */
164
165 static void
166 s390_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
167 int regnum, gdb_byte *buf)
168 {
169 ULONGEST val;
170
171 switch (regnum)
172 {
173 case S390_PC_REGNUM:
174 regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &val);
175 store_unsigned_integer (buf, 4, val & 0x7fffffff);
176 break;
177
178 case S390_CC_REGNUM:
179 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &val);
180 store_unsigned_integer (buf, 4, (val >> 12) & 3);
181 break;
182
183 default:
184 internal_error (__FILE__, __LINE__, _("invalid regnum"));
185 }
186 }
187
188 static void
189 s390_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
190 int regnum, const gdb_byte *buf)
191 {
192 ULONGEST val, psw;
193
194 switch (regnum)
195 {
196 case S390_PC_REGNUM:
197 val = extract_unsigned_integer (buf, 4);
198 regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &psw);
199 psw = (psw & 0x80000000) | (val & 0x7fffffff);
200 regcache_raw_write_unsigned (regcache, S390_PSWA_REGNUM, psw);
201 break;
202
203 case S390_CC_REGNUM:
204 val = extract_unsigned_integer (buf, 4);
205 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &psw);
206 psw = (psw & ~((ULONGEST)3 << 12)) | ((val & 3) << 12);
207 regcache_raw_write_unsigned (regcache, S390_PSWM_REGNUM, psw);
208 break;
209
210 default:
211 internal_error (__FILE__, __LINE__, _("invalid regnum"));
212 }
213 }
214
215 static void
216 s390x_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
217 int regnum, gdb_byte *buf)
218 {
219 ULONGEST val;
220
221 switch (regnum)
222 {
223 case S390_PC_REGNUM:
224 regcache_raw_read (regcache, S390_PSWA_REGNUM, buf);
225 break;
226
227 case S390_CC_REGNUM:
228 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &val);
229 store_unsigned_integer (buf, 4, (val >> 44) & 3);
230 break;
231
232 default:
233 internal_error (__FILE__, __LINE__, _("invalid regnum"));
234 }
235 }
236
237 static void
238 s390x_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
239 int regnum, const gdb_byte *buf)
240 {
241 ULONGEST val, psw;
242
243 switch (regnum)
244 {
245 case S390_PC_REGNUM:
246 regcache_raw_write (regcache, S390_PSWA_REGNUM, buf);
247 break;
248
249 case S390_CC_REGNUM:
250 val = extract_unsigned_integer (buf, 4);
251 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &psw);
252 psw = (psw & ~((ULONGEST)3 << 44)) | ((val & 3) << 44);
253 regcache_raw_write_unsigned (regcache, S390_PSWM_REGNUM, psw);
254 break;
255
256 default:
257 internal_error (__FILE__, __LINE__, _("invalid regnum"));
258 }
259 }
260
261 /* 'float' values are stored in the upper half of floating-point
262 registers, even though we are otherwise a big-endian platform. */
263
264 static struct value *
265 s390_value_from_register (struct type *type, int regnum,
266 struct frame_info *frame)
267 {
268 struct value *value = default_value_from_register (type, regnum, frame);
269 int len = TYPE_LENGTH (type);
270
271 if (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM && len < 8)
272 set_value_offset (value, 0);
273
274 return value;
275 }
276
277 /* Register groups. */
278
279 static int
280 s390_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
281 struct reggroup *group)
282 {
283 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
284
285 /* Registers displayed via 'info regs'. */
286 if (group == general_reggroup)
287 return (regnum >= S390_R0_REGNUM && regnum <= S390_R15_REGNUM)
288 || regnum == S390_PC_REGNUM
289 || regnum == S390_CC_REGNUM;
290
291 /* Registers displayed via 'info float'. */
292 if (group == float_reggroup)
293 return (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM)
294 || regnum == S390_FPC_REGNUM;
295
296 /* Registers that need to be saved/restored in order to
297 push or pop frames. */
298 if (group == save_reggroup || group == restore_reggroup)
299 return regnum != S390_PSWM_REGNUM && regnum != S390_PSWA_REGNUM;
300
301 return default_register_reggroup_p (gdbarch, regnum, group);
302 }
303
304
305 /* Core file register sets. */
306
307 int s390_regmap_gregset[S390_NUM_REGS] =
308 {
309 /* Program Status Word. */
310 0x00, 0x04,
311 /* General Purpose Registers. */
312 0x08, 0x0c, 0x10, 0x14,
313 0x18, 0x1c, 0x20, 0x24,
314 0x28, 0x2c, 0x30, 0x34,
315 0x38, 0x3c, 0x40, 0x44,
316 /* Access Registers. */
317 0x48, 0x4c, 0x50, 0x54,
318 0x58, 0x5c, 0x60, 0x64,
319 0x68, 0x6c, 0x70, 0x74,
320 0x78, 0x7c, 0x80, 0x84,
321 /* Floating Point Control Word. */
322 -1,
323 /* Floating Point Registers. */
324 -1, -1, -1, -1, -1, -1, -1, -1,
325 -1, -1, -1, -1, -1, -1, -1, -1,
326 };
327
328 int s390x_regmap_gregset[S390_NUM_REGS] =
329 {
330 0x00, 0x08,
331 /* General Purpose Registers. */
332 0x10, 0x18, 0x20, 0x28,
333 0x30, 0x38, 0x40, 0x48,
334 0x50, 0x58, 0x60, 0x68,
335 0x70, 0x78, 0x80, 0x88,
336 /* Access Registers. */
337 0x90, 0x94, 0x98, 0x9c,
338 0xa0, 0xa4, 0xa8, 0xac,
339 0xb0, 0xb4, 0xb8, 0xbc,
340 0xc0, 0xc4, 0xc8, 0xcc,
341 /* Floating Point Control Word. */
342 -1,
343 /* Floating Point Registers. */
344 -1, -1, -1, -1, -1, -1, -1, -1,
345 -1, -1, -1, -1, -1, -1, -1, -1,
346 };
347
348 int s390_regmap_fpregset[S390_NUM_REGS] =
349 {
350 /* Program Status Word. */
351 -1, -1,
352 /* General Purpose Registers. */
353 -1, -1, -1, -1, -1, -1, -1, -1,
354 -1, -1, -1, -1, -1, -1, -1, -1,
355 /* Access Registers. */
356 -1, -1, -1, -1, -1, -1, -1, -1,
357 -1, -1, -1, -1, -1, -1, -1, -1,
358 /* Floating Point Control Word. */
359 0x00,
360 /* Floating Point Registers. */
361 0x08, 0x10, 0x18, 0x20,
362 0x28, 0x30, 0x38, 0x40,
363 0x48, 0x50, 0x58, 0x60,
364 0x68, 0x70, 0x78, 0x80,
365 };
366
367 /* Supply register REGNUM from the register set REGSET to register cache
368 REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
369 static void
370 s390_supply_regset (const struct regset *regset, struct regcache *regcache,
371 int regnum, const void *regs, size_t len)
372 {
373 const int *offset = regset->descr;
374 int i;
375
376 for (i = 0; i < S390_NUM_REGS; i++)
377 {
378 if ((regnum == i || regnum == -1) && offset[i] != -1)
379 regcache_raw_supply (regcache, i, (const char *)regs + offset[i]);
380 }
381 }
382
383 /* Collect register REGNUM from the register cache REGCACHE and store
384 it in the buffer specified by REGS and LEN as described by the
385 general-purpose register set REGSET. If REGNUM is -1, do this for
386 all registers in REGSET. */
387 static void
388 s390_collect_regset (const struct regset *regset,
389 const struct regcache *regcache,
390 int regnum, void *regs, size_t len)
391 {
392 const int *offset = regset->descr;
393 int i;
394
395 for (i = 0; i < S390_NUM_REGS; i++)
396 {
397 if ((regnum == i || regnum == -1) && offset[i] != -1)
398 regcache_raw_collect (regcache, i, (char *)regs + offset[i]);
399 }
400 }
401
402 static const struct regset s390_gregset = {
403 s390_regmap_gregset,
404 s390_supply_regset,
405 s390_collect_regset
406 };
407
408 static const struct regset s390x_gregset = {
409 s390x_regmap_gregset,
410 s390_supply_regset,
411 s390_collect_regset
412 };
413
414 static const struct regset s390_fpregset = {
415 s390_regmap_fpregset,
416 s390_supply_regset,
417 s390_collect_regset
418 };
419
420 /* Return the appropriate register set for the core section identified
421 by SECT_NAME and SECT_SIZE. */
422 const struct regset *
423 s390_regset_from_core_section (struct gdbarch *gdbarch,
424 const char *sect_name, size_t sect_size)
425 {
426 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
427
428 if (strcmp (sect_name, ".reg") == 0 && sect_size >= tdep->sizeof_gregset)
429 return tdep->gregset;
430
431 if (strcmp (sect_name, ".reg2") == 0 && sect_size >= tdep->sizeof_fpregset)
432 return tdep->fpregset;
433
434 return NULL;
435 }
436
437
438 /* Decoding S/390 instructions. */
439
440 /* Named opcode values for the S/390 instructions we recognize. Some
441 instructions have their opcode split across two fields; those are the
442 op1_* and op2_* enums. */
443 enum
444 {
445 op1_lhi = 0xa7, op2_lhi = 0x08,
446 op1_lghi = 0xa7, op2_lghi = 0x09,
447 op1_lgfi = 0xc0, op2_lgfi = 0x01,
448 op_lr = 0x18,
449 op_lgr = 0xb904,
450 op_l = 0x58,
451 op1_ly = 0xe3, op2_ly = 0x58,
452 op1_lg = 0xe3, op2_lg = 0x04,
453 op_lm = 0x98,
454 op1_lmy = 0xeb, op2_lmy = 0x98,
455 op1_lmg = 0xeb, op2_lmg = 0x04,
456 op_st = 0x50,
457 op1_sty = 0xe3, op2_sty = 0x50,
458 op1_stg = 0xe3, op2_stg = 0x24,
459 op_std = 0x60,
460 op_stm = 0x90,
461 op1_stmy = 0xeb, op2_stmy = 0x90,
462 op1_stmg = 0xeb, op2_stmg = 0x24,
463 op1_aghi = 0xa7, op2_aghi = 0x0b,
464 op1_ahi = 0xa7, op2_ahi = 0x0a,
465 op1_agfi = 0xc2, op2_agfi = 0x08,
466 op1_afi = 0xc2, op2_afi = 0x09,
467 op1_algfi= 0xc2, op2_algfi= 0x0a,
468 op1_alfi = 0xc2, op2_alfi = 0x0b,
469 op_ar = 0x1a,
470 op_agr = 0xb908,
471 op_a = 0x5a,
472 op1_ay = 0xe3, op2_ay = 0x5a,
473 op1_ag = 0xe3, op2_ag = 0x08,
474 op1_slgfi= 0xc2, op2_slgfi= 0x04,
475 op1_slfi = 0xc2, op2_slfi = 0x05,
476 op_sr = 0x1b,
477 op_sgr = 0xb909,
478 op_s = 0x5b,
479 op1_sy = 0xe3, op2_sy = 0x5b,
480 op1_sg = 0xe3, op2_sg = 0x09,
481 op_nr = 0x14,
482 op_ngr = 0xb980,
483 op_la = 0x41,
484 op1_lay = 0xe3, op2_lay = 0x71,
485 op1_larl = 0xc0, op2_larl = 0x00,
486 op_basr = 0x0d,
487 op_bas = 0x4d,
488 op_bcr = 0x07,
489 op_bc = 0x0d,
490 op1_bras = 0xa7, op2_bras = 0x05,
491 op1_brasl= 0xc0, op2_brasl= 0x05,
492 op1_brc = 0xa7, op2_brc = 0x04,
493 op1_brcl = 0xc0, op2_brcl = 0x04,
494 };
495
496
497 /* Read a single instruction from address AT. */
498
499 #define S390_MAX_INSTR_SIZE 6
500 static int
501 s390_readinstruction (bfd_byte instr[], CORE_ADDR at)
502 {
503 static int s390_instrlen[] = { 2, 4, 4, 6 };
504 int instrlen;
505
506 if (target_read_memory (at, &instr[0], 2))
507 return -1;
508 instrlen = s390_instrlen[instr[0] >> 6];
509 if (instrlen > 2)
510 {
511 if (target_read_memory (at + 2, &instr[2], instrlen - 2))
512 return -1;
513 }
514 return instrlen;
515 }
516
517
518 /* The functions below are for recognizing and decoding S/390
519 instructions of various formats. Each of them checks whether INSN
520 is an instruction of the given format, with the specified opcodes.
521 If it is, it sets the remaining arguments to the values of the
522 instruction's fields, and returns a non-zero value; otherwise, it
523 returns zero.
524
525 These functions' arguments appear in the order they appear in the
526 instruction, not in the machine-language form. So, opcodes always
527 come first, even though they're sometimes scattered around the
528 instructions. And displacements appear before base and extension
529 registers, as they do in the assembly syntax, not at the end, as
530 they do in the machine language. */
531 static int
532 is_ri (bfd_byte *insn, int op1, int op2, unsigned int *r1, int *i2)
533 {
534 if (insn[0] == op1 && (insn[1] & 0xf) == op2)
535 {
536 *r1 = (insn[1] >> 4) & 0xf;
537 /* i2 is a 16-bit signed quantity. */
538 *i2 = (((insn[2] << 8) | insn[3]) ^ 0x8000) - 0x8000;
539 return 1;
540 }
541 else
542 return 0;
543 }
544
545
546 static int
547 is_ril (bfd_byte *insn, int op1, int op2,
548 unsigned int *r1, int *i2)
549 {
550 if (insn[0] == op1 && (insn[1] & 0xf) == op2)
551 {
552 *r1 = (insn[1] >> 4) & 0xf;
553 /* i2 is a signed quantity. If the host 'int' is 32 bits long,
554 no sign extension is necessary, but we don't want to assume
555 that. */
556 *i2 = (((insn[2] << 24)
557 | (insn[3] << 16)
558 | (insn[4] << 8)
559 | (insn[5])) ^ 0x80000000) - 0x80000000;
560 return 1;
561 }
562 else
563 return 0;
564 }
565
566
567 static int
568 is_rr (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
569 {
570 if (insn[0] == op)
571 {
572 *r1 = (insn[1] >> 4) & 0xf;
573 *r2 = insn[1] & 0xf;
574 return 1;
575 }
576 else
577 return 0;
578 }
579
580
581 static int
582 is_rre (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
583 {
584 if (((insn[0] << 8) | insn[1]) == op)
585 {
586 /* Yes, insn[3]. insn[2] is unused in RRE format. */
587 *r1 = (insn[3] >> 4) & 0xf;
588 *r2 = insn[3] & 0xf;
589 return 1;
590 }
591 else
592 return 0;
593 }
594
595
596 static int
597 is_rs (bfd_byte *insn, int op,
598 unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2)
599 {
600 if (insn[0] == op)
601 {
602 *r1 = (insn[1] >> 4) & 0xf;
603 *r3 = insn[1] & 0xf;
604 *b2 = (insn[2] >> 4) & 0xf;
605 *d2 = ((insn[2] & 0xf) << 8) | insn[3];
606 return 1;
607 }
608 else
609 return 0;
610 }
611
612
613 static int
614 is_rsy (bfd_byte *insn, int op1, int op2,
615 unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2)
616 {
617 if (insn[0] == op1
618 && insn[5] == op2)
619 {
620 *r1 = (insn[1] >> 4) & 0xf;
621 *r3 = insn[1] & 0xf;
622 *b2 = (insn[2] >> 4) & 0xf;
623 /* The 'long displacement' is a 20-bit signed integer. */
624 *d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12))
625 ^ 0x80000) - 0x80000;
626 return 1;
627 }
628 else
629 return 0;
630 }
631
632
633 static int
634 is_rx (bfd_byte *insn, int op,
635 unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2)
636 {
637 if (insn[0] == op)
638 {
639 *r1 = (insn[1] >> 4) & 0xf;
640 *x2 = insn[1] & 0xf;
641 *b2 = (insn[2] >> 4) & 0xf;
642 *d2 = ((insn[2] & 0xf) << 8) | insn[3];
643 return 1;
644 }
645 else
646 return 0;
647 }
648
649
650 static int
651 is_rxy (bfd_byte *insn, int op1, int op2,
652 unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2)
653 {
654 if (insn[0] == op1
655 && insn[5] == op2)
656 {
657 *r1 = (insn[1] >> 4) & 0xf;
658 *x2 = insn[1] & 0xf;
659 *b2 = (insn[2] >> 4) & 0xf;
660 /* The 'long displacement' is a 20-bit signed integer. */
661 *d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12))
662 ^ 0x80000) - 0x80000;
663 return 1;
664 }
665 else
666 return 0;
667 }
668
669
670 /* Prologue analysis. */
671
672 #define S390_NUM_GPRS 16
673 #define S390_NUM_FPRS 16
674
675 struct s390_prologue_data {
676
677 /* The stack. */
678 struct pv_area *stack;
679
680 /* The size of a GPR or FPR. */
681 int gpr_size;
682 int fpr_size;
683
684 /* The general-purpose registers. */
685 pv_t gpr[S390_NUM_GPRS];
686
687 /* The floating-point registers. */
688 pv_t fpr[S390_NUM_FPRS];
689
690 /* The offset relative to the CFA where the incoming GPR N was saved
691 by the function prologue. 0 if not saved or unknown. */
692 int gpr_slot[S390_NUM_GPRS];
693
694 /* Likewise for FPRs. */
695 int fpr_slot[S390_NUM_FPRS];
696
697 /* Nonzero if the backchain was saved. This is assumed to be the
698 case when the incoming SP is saved at the current SP location. */
699 int back_chain_saved_p;
700 };
701
702 /* Return the effective address for an X-style instruction, like:
703
704 L R1, D2(X2, B2)
705
706 Here, X2 and B2 are registers, and D2 is a signed 20-bit
707 constant; the effective address is the sum of all three. If either
708 X2 or B2 are zero, then it doesn't contribute to the sum --- this
709 means that r0 can't be used as either X2 or B2. */
710 static pv_t
711 s390_addr (struct s390_prologue_data *data,
712 int d2, unsigned int x2, unsigned int b2)
713 {
714 pv_t result;
715
716 result = pv_constant (d2);
717 if (x2)
718 result = pv_add (result, data->gpr[x2]);
719 if (b2)
720 result = pv_add (result, data->gpr[b2]);
721
722 return result;
723 }
724
725 /* Do a SIZE-byte store of VALUE to D2(X2,B2). */
726 static void
727 s390_store (struct s390_prologue_data *data,
728 int d2, unsigned int x2, unsigned int b2, CORE_ADDR size,
729 pv_t value)
730 {
731 pv_t addr = s390_addr (data, d2, x2, b2);
732 pv_t offset;
733
734 /* Check whether we are storing the backchain. */
735 offset = pv_subtract (data->gpr[S390_SP_REGNUM - S390_R0_REGNUM], addr);
736
737 if (pv_is_constant (offset) && offset.k == 0)
738 if (size == data->gpr_size
739 && pv_is_register_k (value, S390_SP_REGNUM, 0))
740 {
741 data->back_chain_saved_p = 1;
742 return;
743 }
744
745
746 /* Check whether we are storing a register into the stack. */
747 if (!pv_area_store_would_trash (data->stack, addr))
748 pv_area_store (data->stack, addr, size, value);
749
750
751 /* Note: If this is some store we cannot identify, you might think we
752 should forget our cached values, as any of those might have been hit.
753
754 However, we make the assumption that the register save areas are only
755 ever stored to once in any given function, and we do recognize these
756 stores. Thus every store we cannot recognize does not hit our data. */
757 }
758
759 /* Do a SIZE-byte load from D2(X2,B2). */
760 static pv_t
761 s390_load (struct s390_prologue_data *data,
762 int d2, unsigned int x2, unsigned int b2, CORE_ADDR size)
763
764 {
765 pv_t addr = s390_addr (data, d2, x2, b2);
766 pv_t offset;
767
768 /* If it's a load from an in-line constant pool, then we can
769 simulate that, under the assumption that the code isn't
770 going to change between the time the processor actually
771 executed it creating the current frame, and the time when
772 we're analyzing the code to unwind past that frame. */
773 if (pv_is_constant (addr))
774 {
775 struct section_table *secp;
776 secp = target_section_by_addr (&current_target, addr.k);
777 if (secp != NULL
778 && (bfd_get_section_flags (secp->bfd, secp->the_bfd_section)
779 & SEC_READONLY))
780 return pv_constant (read_memory_integer (addr.k, size));
781 }
782
783 /* Check whether we are accessing one of our save slots. */
784 return pv_area_fetch (data->stack, addr, size);
785 }
786
787 /* Function for finding saved registers in a 'struct pv_area'; we pass
788 this to pv_area_scan.
789
790 If VALUE is a saved register, ADDR says it was saved at a constant
791 offset from the frame base, and SIZE indicates that the whole
792 register was saved, record its offset in the reg_offset table in
793 PROLOGUE_UNTYPED. */
794 static void
795 s390_check_for_saved (void *data_untyped, pv_t addr, CORE_ADDR size, pv_t value)
796 {
797 struct s390_prologue_data *data = data_untyped;
798 int i, offset;
799
800 if (!pv_is_register (addr, S390_SP_REGNUM))
801 return;
802
803 offset = 16 * data->gpr_size + 32 - addr.k;
804
805 /* If we are storing the original value of a register, we want to
806 record the CFA offset. If the same register is stored multiple
807 times, the stack slot with the highest address counts. */
808
809 for (i = 0; i < S390_NUM_GPRS; i++)
810 if (size == data->gpr_size
811 && pv_is_register_k (value, S390_R0_REGNUM + i, 0))
812 if (data->gpr_slot[i] == 0
813 || data->gpr_slot[i] > offset)
814 {
815 data->gpr_slot[i] = offset;
816 return;
817 }
818
819 for (i = 0; i < S390_NUM_FPRS; i++)
820 if (size == data->fpr_size
821 && pv_is_register_k (value, S390_F0_REGNUM + i, 0))
822 if (data->fpr_slot[i] == 0
823 || data->fpr_slot[i] > offset)
824 {
825 data->fpr_slot[i] = offset;
826 return;
827 }
828 }
829
830 /* Analyze the prologue of the function starting at START_PC,
831 continuing at most until CURRENT_PC. Initialize DATA to
832 hold all information we find out about the state of the registers
833 and stack slots. Return the address of the instruction after
834 the last one that changed the SP, FP, or back chain; or zero
835 on error. */
836 static CORE_ADDR
837 s390_analyze_prologue (struct gdbarch *gdbarch,
838 CORE_ADDR start_pc,
839 CORE_ADDR current_pc,
840 struct s390_prologue_data *data)
841 {
842 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
843
844 /* Our return value:
845 The address of the instruction after the last one that changed
846 the SP, FP, or back chain; zero if we got an error trying to
847 read memory. */
848 CORE_ADDR result = start_pc;
849
850 /* The current PC for our abstract interpretation. */
851 CORE_ADDR pc;
852
853 /* The address of the next instruction after that. */
854 CORE_ADDR next_pc;
855
856 /* Set up everything's initial value. */
857 {
858 int i;
859
860 data->stack = make_pv_area (S390_SP_REGNUM);
861
862 /* For the purpose of prologue tracking, we consider the GPR size to
863 be equal to the ABI word size, even if it is actually larger
864 (i.e. when running a 32-bit binary under a 64-bit kernel). */
865 data->gpr_size = word_size;
866 data->fpr_size = 8;
867
868 for (i = 0; i < S390_NUM_GPRS; i++)
869 data->gpr[i] = pv_register (S390_R0_REGNUM + i, 0);
870
871 for (i = 0; i < S390_NUM_FPRS; i++)
872 data->fpr[i] = pv_register (S390_F0_REGNUM + i, 0);
873
874 for (i = 0; i < S390_NUM_GPRS; i++)
875 data->gpr_slot[i] = 0;
876
877 for (i = 0; i < S390_NUM_FPRS; i++)
878 data->fpr_slot[i] = 0;
879
880 data->back_chain_saved_p = 0;
881 }
882
883 /* Start interpreting instructions, until we hit the frame's
884 current PC or the first branch instruction. */
885 for (pc = start_pc; pc > 0 && pc < current_pc; pc = next_pc)
886 {
887 bfd_byte insn[S390_MAX_INSTR_SIZE];
888 int insn_len = s390_readinstruction (insn, pc);
889
890 bfd_byte dummy[S390_MAX_INSTR_SIZE] = { 0 };
891 bfd_byte *insn32 = word_size == 4 ? insn : dummy;
892 bfd_byte *insn64 = word_size == 8 ? insn : dummy;
893
894 /* Fields for various kinds of instructions. */
895 unsigned int b2, r1, r2, x2, r3;
896 int i2, d2;
897
898 /* The values of SP and FP before this instruction,
899 for detecting instructions that change them. */
900 pv_t pre_insn_sp, pre_insn_fp;
901 /* Likewise for the flag whether the back chain was saved. */
902 int pre_insn_back_chain_saved_p;
903
904 /* If we got an error trying to read the instruction, report it. */
905 if (insn_len < 0)
906 {
907 result = 0;
908 break;
909 }
910
911 next_pc = pc + insn_len;
912
913 pre_insn_sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM];
914 pre_insn_fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
915 pre_insn_back_chain_saved_p = data->back_chain_saved_p;
916
917
918 /* LHI r1, i2 --- load halfword immediate. */
919 /* LGHI r1, i2 --- load halfword immediate (64-bit version). */
920 /* LGFI r1, i2 --- load fullword immediate. */
921 if (is_ri (insn32, op1_lhi, op2_lhi, &r1, &i2)
922 || is_ri (insn64, op1_lghi, op2_lghi, &r1, &i2)
923 || is_ril (insn, op1_lgfi, op2_lgfi, &r1, &i2))
924 data->gpr[r1] = pv_constant (i2);
925
926 /* LR r1, r2 --- load from register. */
927 /* LGR r1, r2 --- load from register (64-bit version). */
928 else if (is_rr (insn32, op_lr, &r1, &r2)
929 || is_rre (insn64, op_lgr, &r1, &r2))
930 data->gpr[r1] = data->gpr[r2];
931
932 /* L r1, d2(x2, b2) --- load. */
933 /* LY r1, d2(x2, b2) --- load (long-displacement version). */
934 /* LG r1, d2(x2, b2) --- load (64-bit version). */
935 else if (is_rx (insn32, op_l, &r1, &d2, &x2, &b2)
936 || is_rxy (insn32, op1_ly, op2_ly, &r1, &d2, &x2, &b2)
937 || is_rxy (insn64, op1_lg, op2_lg, &r1, &d2, &x2, &b2))
938 data->gpr[r1] = s390_load (data, d2, x2, b2, data->gpr_size);
939
940 /* ST r1, d2(x2, b2) --- store. */
941 /* STY r1, d2(x2, b2) --- store (long-displacement version). */
942 /* STG r1, d2(x2, b2) --- store (64-bit version). */
943 else if (is_rx (insn32, op_st, &r1, &d2, &x2, &b2)
944 || is_rxy (insn32, op1_sty, op2_sty, &r1, &d2, &x2, &b2)
945 || is_rxy (insn64, op1_stg, op2_stg, &r1, &d2, &x2, &b2))
946 s390_store (data, d2, x2, b2, data->gpr_size, data->gpr[r1]);
947
948 /* STD r1, d2(x2,b2) --- store floating-point register. */
949 else if (is_rx (insn, op_std, &r1, &d2, &x2, &b2))
950 s390_store (data, d2, x2, b2, data->fpr_size, data->fpr[r1]);
951
952 /* STM r1, r3, d2(b2) --- store multiple. */
953 /* STMY r1, r3, d2(b2) --- store multiple (long-displacement version). */
954 /* STMG r1, r3, d2(b2) --- store multiple (64-bit version). */
955 else if (is_rs (insn32, op_stm, &r1, &r3, &d2, &b2)
956 || is_rsy (insn32, op1_stmy, op2_stmy, &r1, &r3, &d2, &b2)
957 || is_rsy (insn64, op1_stmg, op2_stmg, &r1, &r3, &d2, &b2))
958 {
959 for (; r1 <= r3; r1++, d2 += data->gpr_size)
960 s390_store (data, d2, 0, b2, data->gpr_size, data->gpr[r1]);
961 }
962
963 /* AHI r1, i2 --- add halfword immediate. */
964 /* AGHI r1, i2 --- add halfword immediate (64-bit version). */
965 /* AFI r1, i2 --- add fullword immediate. */
966 /* AGFI r1, i2 --- add fullword immediate (64-bit version). */
967 else if (is_ri (insn32, op1_ahi, op2_ahi, &r1, &i2)
968 || is_ri (insn64, op1_aghi, op2_aghi, &r1, &i2)
969 || is_ril (insn32, op1_afi, op2_afi, &r1, &i2)
970 || is_ril (insn64, op1_agfi, op2_agfi, &r1, &i2))
971 data->gpr[r1] = pv_add_constant (data->gpr[r1], i2);
972
973 /* ALFI r1, i2 --- add logical immediate. */
974 /* ALGFI r1, i2 --- add logical immediate (64-bit version). */
975 else if (is_ril (insn32, op1_alfi, op2_alfi, &r1, &i2)
976 || is_ril (insn64, op1_algfi, op2_algfi, &r1, &i2))
977 data->gpr[r1] = pv_add_constant (data->gpr[r1],
978 (CORE_ADDR)i2 & 0xffffffff);
979
980 /* AR r1, r2 -- add register. */
981 /* AGR r1, r2 -- add register (64-bit version). */
982 else if (is_rr (insn32, op_ar, &r1, &r2)
983 || is_rre (insn64, op_agr, &r1, &r2))
984 data->gpr[r1] = pv_add (data->gpr[r1], data->gpr[r2]);
985
986 /* A r1, d2(x2, b2) -- add. */
987 /* AY r1, d2(x2, b2) -- add (long-displacement version). */
988 /* AG r1, d2(x2, b2) -- add (64-bit version). */
989 else if (is_rx (insn32, op_a, &r1, &d2, &x2, &b2)
990 || is_rxy (insn32, op1_ay, op2_ay, &r1, &d2, &x2, &b2)
991 || is_rxy (insn64, op1_ag, op2_ag, &r1, &d2, &x2, &b2))
992 data->gpr[r1] = pv_add (data->gpr[r1],
993 s390_load (data, d2, x2, b2, data->gpr_size));
994
995 /* SLFI r1, i2 --- subtract logical immediate. */
996 /* SLGFI r1, i2 --- subtract logical immediate (64-bit version). */
997 else if (is_ril (insn32, op1_slfi, op2_slfi, &r1, &i2)
998 || is_ril (insn64, op1_slgfi, op2_slgfi, &r1, &i2))
999 data->gpr[r1] = pv_add_constant (data->gpr[r1],
1000 -((CORE_ADDR)i2 & 0xffffffff));
1001
1002 /* SR r1, r2 -- subtract register. */
1003 /* SGR r1, r2 -- subtract register (64-bit version). */
1004 else if (is_rr (insn32, op_sr, &r1, &r2)
1005 || is_rre (insn64, op_sgr, &r1, &r2))
1006 data->gpr[r1] = pv_subtract (data->gpr[r1], data->gpr[r2]);
1007
1008 /* S r1, d2(x2, b2) -- subtract. */
1009 /* SY r1, d2(x2, b2) -- subtract (long-displacement version). */
1010 /* SG r1, d2(x2, b2) -- subtract (64-bit version). */
1011 else if (is_rx (insn32, op_s, &r1, &d2, &x2, &b2)
1012 || is_rxy (insn32, op1_sy, op2_sy, &r1, &d2, &x2, &b2)
1013 || is_rxy (insn64, op1_sg, op2_sg, &r1, &d2, &x2, &b2))
1014 data->gpr[r1] = pv_subtract (data->gpr[r1],
1015 s390_load (data, d2, x2, b2, data->gpr_size));
1016
1017 /* LA r1, d2(x2, b2) --- load address. */
1018 /* LAY r1, d2(x2, b2) --- load address (long-displacement version). */
1019 else if (is_rx (insn, op_la, &r1, &d2, &x2, &b2)
1020 || is_rxy (insn, op1_lay, op2_lay, &r1, &d2, &x2, &b2))
1021 data->gpr[r1] = s390_addr (data, d2, x2, b2);
1022
1023 /* LARL r1, i2 --- load address relative long. */
1024 else if (is_ril (insn, op1_larl, op2_larl, &r1, &i2))
1025 data->gpr[r1] = pv_constant (pc + i2 * 2);
1026
1027 /* BASR r1, 0 --- branch and save.
1028 Since r2 is zero, this saves the PC in r1, but doesn't branch. */
1029 else if (is_rr (insn, op_basr, &r1, &r2)
1030 && r2 == 0)
1031 data->gpr[r1] = pv_constant (next_pc);
1032
1033 /* BRAS r1, i2 --- branch relative and save. */
1034 else if (is_ri (insn, op1_bras, op2_bras, &r1, &i2))
1035 {
1036 data->gpr[r1] = pv_constant (next_pc);
1037 next_pc = pc + i2 * 2;
1038
1039 /* We'd better not interpret any backward branches. We'll
1040 never terminate. */
1041 if (next_pc <= pc)
1042 break;
1043 }
1044
1045 /* Terminate search when hitting any other branch instruction. */
1046 else if (is_rr (insn, op_basr, &r1, &r2)
1047 || is_rx (insn, op_bas, &r1, &d2, &x2, &b2)
1048 || is_rr (insn, op_bcr, &r1, &r2)
1049 || is_rx (insn, op_bc, &r1, &d2, &x2, &b2)
1050 || is_ri (insn, op1_brc, op2_brc, &r1, &i2)
1051 || is_ril (insn, op1_brcl, op2_brcl, &r1, &i2)
1052 || is_ril (insn, op1_brasl, op2_brasl, &r2, &i2))
1053 break;
1054
1055 else
1056 /* An instruction we don't know how to simulate. The only
1057 safe thing to do would be to set every value we're tracking
1058 to 'unknown'. Instead, we'll be optimistic: we assume that
1059 we *can* interpret every instruction that the compiler uses
1060 to manipulate any of the data we're interested in here --
1061 then we can just ignore anything else. */
1062 ;
1063
1064 /* Record the address after the last instruction that changed
1065 the FP, SP, or backlink. Ignore instructions that changed
1066 them back to their original values --- those are probably
1067 restore instructions. (The back chain is never restored,
1068 just popped.) */
1069 {
1070 pv_t sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM];
1071 pv_t fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
1072
1073 if ((! pv_is_identical (pre_insn_sp, sp)
1074 && ! pv_is_register_k (sp, S390_SP_REGNUM, 0)
1075 && sp.kind != pvk_unknown)
1076 || (! pv_is_identical (pre_insn_fp, fp)
1077 && ! pv_is_register_k (fp, S390_FRAME_REGNUM, 0)
1078 && fp.kind != pvk_unknown)
1079 || pre_insn_back_chain_saved_p != data->back_chain_saved_p)
1080 result = next_pc;
1081 }
1082 }
1083
1084 /* Record where all the registers were saved. */
1085 pv_area_scan (data->stack, s390_check_for_saved, data);
1086
1087 free_pv_area (data->stack);
1088 data->stack = NULL;
1089
1090 return result;
1091 }
1092
1093 /* Advance PC across any function entry prologue instructions to reach
1094 some "real" code. */
1095 static CORE_ADDR
1096 s390_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
1097 {
1098 struct s390_prologue_data data;
1099 CORE_ADDR skip_pc;
1100 skip_pc = s390_analyze_prologue (gdbarch, pc, (CORE_ADDR)-1, &data);
1101 return skip_pc ? skip_pc : pc;
1102 }
1103
1104 /* Return true if we are in the functin's epilogue, i.e. after the
1105 instruction that destroyed the function's stack frame. */
1106 static int
1107 s390_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
1108 {
1109 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1110
1111 /* In frameless functions, there's not frame to destroy and thus
1112 we don't care about the epilogue.
1113
1114 In functions with frame, the epilogue sequence is a pair of
1115 a LM-type instruction that restores (amongst others) the
1116 return register %r14 and the stack pointer %r15, followed
1117 by a branch 'br %r14' --or equivalent-- that effects the
1118 actual return.
1119
1120 In that situation, this function needs to return 'true' in
1121 exactly one case: when pc points to that branch instruction.
1122
1123 Thus we try to disassemble the one instructions immediately
1124 preceeding pc and check whether it is an LM-type instruction
1125 modifying the stack pointer.
1126
1127 Note that disassembling backwards is not reliable, so there
1128 is a slight chance of false positives here ... */
1129
1130 bfd_byte insn[6];
1131 unsigned int r1, r3, b2;
1132 int d2;
1133
1134 if (word_size == 4
1135 && !target_read_memory (pc - 4, insn, 4)
1136 && is_rs (insn, op_lm, &r1, &r3, &d2, &b2)
1137 && r3 == S390_SP_REGNUM - S390_R0_REGNUM)
1138 return 1;
1139
1140 if (word_size == 4
1141 && !target_read_memory (pc - 6, insn, 6)
1142 && is_rsy (insn, op1_lmy, op2_lmy, &r1, &r3, &d2, &b2)
1143 && r3 == S390_SP_REGNUM - S390_R0_REGNUM)
1144 return 1;
1145
1146 if (word_size == 8
1147 && !target_read_memory (pc - 6, insn, 6)
1148 && is_rsy (insn, op1_lmg, op2_lmg, &r1, &r3, &d2, &b2)
1149 && r3 == S390_SP_REGNUM - S390_R0_REGNUM)
1150 return 1;
1151
1152 return 0;
1153 }
1154
1155
1156 /* Normal stack frames. */
1157
1158 struct s390_unwind_cache {
1159
1160 CORE_ADDR func;
1161 CORE_ADDR frame_base;
1162 CORE_ADDR local_base;
1163
1164 struct trad_frame_saved_reg *saved_regs;
1165 };
1166
1167 static int
1168 s390_prologue_frame_unwind_cache (struct frame_info *this_frame,
1169 struct s390_unwind_cache *info)
1170 {
1171 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1172 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
1173 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1174 struct s390_prologue_data data;
1175 pv_t *fp = &data.gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
1176 pv_t *sp = &data.gpr[S390_SP_REGNUM - S390_R0_REGNUM];
1177 int i;
1178 CORE_ADDR cfa;
1179 CORE_ADDR func;
1180 CORE_ADDR result;
1181 ULONGEST reg;
1182 CORE_ADDR prev_sp;
1183 int frame_pointer;
1184 int size;
1185
1186 /* Try to find the function start address. If we can't find it, we don't
1187 bother searching for it -- with modern compilers this would be mostly
1188 pointless anyway. Trust that we'll either have valid DWARF-2 CFI data
1189 or else a valid backchain ... */
1190 func = get_frame_func (this_frame);
1191 if (!func)
1192 return 0;
1193
1194 /* Try to analyze the prologue. */
1195 result = s390_analyze_prologue (gdbarch, func,
1196 get_frame_pc (this_frame), &data);
1197 if (!result)
1198 return 0;
1199
1200 /* If this was successful, we should have found the instruction that
1201 sets the stack pointer register to the previous value of the stack
1202 pointer minus the frame size. */
1203 if (!pv_is_register (*sp, S390_SP_REGNUM))
1204 return 0;
1205
1206 /* A frame size of zero at this point can mean either a real
1207 frameless function, or else a failure to find the prologue.
1208 Perform some sanity checks to verify we really have a
1209 frameless function. */
1210 if (sp->k == 0)
1211 {
1212 /* If the next frame is a NORMAL_FRAME, this frame *cannot* have frame
1213 size zero. This is only possible if the next frame is a sentinel
1214 frame, a dummy frame, or a signal trampoline frame. */
1215 /* FIXME: cagney/2004-05-01: This sanity check shouldn't be
1216 needed, instead the code should simpliy rely on its
1217 analysis. */
1218 if (get_next_frame (this_frame)
1219 && get_frame_type (get_next_frame (this_frame)) == NORMAL_FRAME)
1220 return 0;
1221
1222 /* If we really have a frameless function, %r14 must be valid
1223 -- in particular, it must point to a different function. */
1224 reg = get_frame_register_unsigned (this_frame, S390_RETADDR_REGNUM);
1225 reg = gdbarch_addr_bits_remove (gdbarch, reg) - 1;
1226 if (get_pc_function_start (reg) == func)
1227 {
1228 /* However, there is one case where it *is* valid for %r14
1229 to point to the same function -- if this is a recursive
1230 call, and we have stopped in the prologue *before* the
1231 stack frame was allocated.
1232
1233 Recognize this case by looking ahead a bit ... */
1234
1235 struct s390_prologue_data data2;
1236 pv_t *sp = &data2.gpr[S390_SP_REGNUM - S390_R0_REGNUM];
1237
1238 if (!(s390_analyze_prologue (gdbarch, func, (CORE_ADDR)-1, &data2)
1239 && pv_is_register (*sp, S390_SP_REGNUM)
1240 && sp->k != 0))
1241 return 0;
1242 }
1243 }
1244
1245
1246 /* OK, we've found valid prologue data. */
1247 size = -sp->k;
1248
1249 /* If the frame pointer originally also holds the same value
1250 as the stack pointer, we're probably using it. If it holds
1251 some other value -- even a constant offset -- it is most
1252 likely used as temp register. */
1253 if (pv_is_identical (*sp, *fp))
1254 frame_pointer = S390_FRAME_REGNUM;
1255 else
1256 frame_pointer = S390_SP_REGNUM;
1257
1258 /* If we've detected a function with stack frame, we'll still have to
1259 treat it as frameless if we're currently within the function epilog
1260 code at a point where the frame pointer has already been restored.
1261 This can only happen in an innermost frame. */
1262 /* FIXME: cagney/2004-05-01: This sanity check shouldn't be needed,
1263 instead the code should simpliy rely on its analysis. */
1264 if (size > 0
1265 && (!get_next_frame (this_frame)
1266 || get_frame_type (get_next_frame (this_frame)) != NORMAL_FRAME))
1267 {
1268 /* See the comment in s390_in_function_epilogue_p on why this is
1269 not completely reliable ... */
1270 if (s390_in_function_epilogue_p (gdbarch, get_frame_pc (this_frame)))
1271 {
1272 memset (&data, 0, sizeof (data));
1273 size = 0;
1274 frame_pointer = S390_SP_REGNUM;
1275 }
1276 }
1277
1278 /* Once we know the frame register and the frame size, we can unwind
1279 the current value of the frame register from the next frame, and
1280 add back the frame size to arrive that the previous frame's
1281 stack pointer value. */
1282 prev_sp = get_frame_register_unsigned (this_frame, frame_pointer) + size;
1283 cfa = prev_sp + 16*word_size + 32;
1284
1285 /* Record the addresses of all register spill slots the prologue parser
1286 has recognized. Consider only registers defined as call-saved by the
1287 ABI; for call-clobbered registers the parser may have recognized
1288 spurious stores. */
1289
1290 for (i = 6; i <= 15; i++)
1291 if (data.gpr_slot[i] != 0)
1292 info->saved_regs[S390_R0_REGNUM + i].addr = cfa - data.gpr_slot[i];
1293
1294 switch (tdep->abi)
1295 {
1296 case ABI_LINUX_S390:
1297 if (data.fpr_slot[4] != 0)
1298 info->saved_regs[S390_F4_REGNUM].addr = cfa - data.fpr_slot[4];
1299 if (data.fpr_slot[6] != 0)
1300 info->saved_regs[S390_F6_REGNUM].addr = cfa - data.fpr_slot[6];
1301 break;
1302
1303 case ABI_LINUX_ZSERIES:
1304 for (i = 8; i <= 15; i++)
1305 if (data.fpr_slot[i] != 0)
1306 info->saved_regs[S390_F0_REGNUM + i].addr = cfa - data.fpr_slot[i];
1307 break;
1308 }
1309
1310 /* Function return will set PC to %r14. */
1311 info->saved_regs[S390_PC_REGNUM] = info->saved_regs[S390_RETADDR_REGNUM];
1312
1313 /* In frameless functions, we unwind simply by moving the return
1314 address to the PC. However, if we actually stored to the
1315 save area, use that -- we might only think the function frameless
1316 because we're in the middle of the prologue ... */
1317 if (size == 0
1318 && !trad_frame_addr_p (info->saved_regs, S390_PC_REGNUM))
1319 {
1320 info->saved_regs[S390_PC_REGNUM].realreg = S390_RETADDR_REGNUM;
1321 }
1322
1323 /* Another sanity check: unless this is a frameless function,
1324 we should have found spill slots for SP and PC.
1325 If not, we cannot unwind further -- this happens e.g. in
1326 libc's thread_start routine. */
1327 if (size > 0)
1328 {
1329 if (!trad_frame_addr_p (info->saved_regs, S390_SP_REGNUM)
1330 || !trad_frame_addr_p (info->saved_regs, S390_PC_REGNUM))
1331 prev_sp = -1;
1332 }
1333
1334 /* We use the current value of the frame register as local_base,
1335 and the top of the register save area as frame_base. */
1336 if (prev_sp != -1)
1337 {
1338 info->frame_base = prev_sp + 16*word_size + 32;
1339 info->local_base = prev_sp - size;
1340 }
1341
1342 info->func = func;
1343 return 1;
1344 }
1345
1346 static void
1347 s390_backchain_frame_unwind_cache (struct frame_info *this_frame,
1348 struct s390_unwind_cache *info)
1349 {
1350 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1351 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1352 CORE_ADDR backchain;
1353 ULONGEST reg;
1354 LONGEST sp;
1355
1356 /* Get the backchain. */
1357 reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
1358 backchain = read_memory_unsigned_integer (reg, word_size);
1359
1360 /* A zero backchain terminates the frame chain. As additional
1361 sanity check, let's verify that the spill slot for SP in the
1362 save area pointed to by the backchain in fact links back to
1363 the save area. */
1364 if (backchain != 0
1365 && safe_read_memory_integer (backchain + 15*word_size, word_size, &sp)
1366 && (CORE_ADDR)sp == backchain)
1367 {
1368 /* We don't know which registers were saved, but it will have
1369 to be at least %r14 and %r15. This will allow us to continue
1370 unwinding, but other prev-frame registers may be incorrect ... */
1371 info->saved_regs[S390_SP_REGNUM].addr = backchain + 15*word_size;
1372 info->saved_regs[S390_RETADDR_REGNUM].addr = backchain + 14*word_size;
1373
1374 /* Function return will set PC to %r14. */
1375 info->saved_regs[S390_PC_REGNUM] = info->saved_regs[S390_RETADDR_REGNUM];
1376
1377 /* We use the current value of the frame register as local_base,
1378 and the top of the register save area as frame_base. */
1379 info->frame_base = backchain + 16*word_size + 32;
1380 info->local_base = reg;
1381 }
1382
1383 info->func = get_frame_pc (this_frame);
1384 }
1385
1386 static struct s390_unwind_cache *
1387 s390_frame_unwind_cache (struct frame_info *this_frame,
1388 void **this_prologue_cache)
1389 {
1390 struct s390_unwind_cache *info;
1391 if (*this_prologue_cache)
1392 return *this_prologue_cache;
1393
1394 info = FRAME_OBSTACK_ZALLOC (struct s390_unwind_cache);
1395 *this_prologue_cache = info;
1396 info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
1397 info->func = -1;
1398 info->frame_base = -1;
1399 info->local_base = -1;
1400
1401 /* Try to use prologue analysis to fill the unwind cache.
1402 If this fails, fall back to reading the stack backchain. */
1403 if (!s390_prologue_frame_unwind_cache (this_frame, info))
1404 s390_backchain_frame_unwind_cache (this_frame, info);
1405
1406 return info;
1407 }
1408
1409 static void
1410 s390_frame_this_id (struct frame_info *this_frame,
1411 void **this_prologue_cache,
1412 struct frame_id *this_id)
1413 {
1414 struct s390_unwind_cache *info
1415 = s390_frame_unwind_cache (this_frame, this_prologue_cache);
1416
1417 if (info->frame_base == -1)
1418 return;
1419
1420 *this_id = frame_id_build (info->frame_base, info->func);
1421 }
1422
1423 static struct value *
1424 s390_frame_prev_register (struct frame_info *this_frame,
1425 void **this_prologue_cache, int regnum)
1426 {
1427 struct s390_unwind_cache *info
1428 = s390_frame_unwind_cache (this_frame, this_prologue_cache);
1429 return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
1430 }
1431
1432 static const struct frame_unwind s390_frame_unwind = {
1433 NORMAL_FRAME,
1434 s390_frame_this_id,
1435 s390_frame_prev_register,
1436 NULL,
1437 default_frame_sniffer
1438 };
1439
1440
1441 /* Code stubs and their stack frames. For things like PLTs and NULL
1442 function calls (where there is no true frame and the return address
1443 is in the RETADDR register). */
1444
1445 struct s390_stub_unwind_cache
1446 {
1447 CORE_ADDR frame_base;
1448 struct trad_frame_saved_reg *saved_regs;
1449 };
1450
1451 static struct s390_stub_unwind_cache *
1452 s390_stub_frame_unwind_cache (struct frame_info *this_frame,
1453 void **this_prologue_cache)
1454 {
1455 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1456 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1457 struct s390_stub_unwind_cache *info;
1458 ULONGEST reg;
1459
1460 if (*this_prologue_cache)
1461 return *this_prologue_cache;
1462
1463 info = FRAME_OBSTACK_ZALLOC (struct s390_stub_unwind_cache);
1464 *this_prologue_cache = info;
1465 info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
1466
1467 /* The return address is in register %r14. */
1468 info->saved_regs[S390_PC_REGNUM].realreg = S390_RETADDR_REGNUM;
1469
1470 /* Retrieve stack pointer and determine our frame base. */
1471 reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
1472 info->frame_base = reg + 16*word_size + 32;
1473
1474 return info;
1475 }
1476
1477 static void
1478 s390_stub_frame_this_id (struct frame_info *this_frame,
1479 void **this_prologue_cache,
1480 struct frame_id *this_id)
1481 {
1482 struct s390_stub_unwind_cache *info
1483 = s390_stub_frame_unwind_cache (this_frame, this_prologue_cache);
1484 *this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame));
1485 }
1486
1487 static struct value *
1488 s390_stub_frame_prev_register (struct frame_info *this_frame,
1489 void **this_prologue_cache, int regnum)
1490 {
1491 struct s390_stub_unwind_cache *info
1492 = s390_stub_frame_unwind_cache (this_frame, this_prologue_cache);
1493 return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
1494 }
1495
1496 static int
1497 s390_stub_frame_sniffer (const struct frame_unwind *self,
1498 struct frame_info *this_frame,
1499 void **this_prologue_cache)
1500 {
1501 CORE_ADDR addr_in_block;
1502 bfd_byte insn[S390_MAX_INSTR_SIZE];
1503
1504 /* If the current PC points to non-readable memory, we assume we
1505 have trapped due to an invalid function pointer call. We handle
1506 the non-existing current function like a PLT stub. */
1507 addr_in_block = get_frame_address_in_block (this_frame);
1508 if (in_plt_section (addr_in_block, NULL)
1509 || s390_readinstruction (insn, get_frame_pc (this_frame)) < 0)
1510 return 1;
1511 return 0;
1512 }
1513
1514 static const struct frame_unwind s390_stub_frame_unwind = {
1515 NORMAL_FRAME,
1516 s390_stub_frame_this_id,
1517 s390_stub_frame_prev_register,
1518 NULL,
1519 s390_stub_frame_sniffer
1520 };
1521
1522
1523 /* Signal trampoline stack frames. */
1524
1525 struct s390_sigtramp_unwind_cache {
1526 CORE_ADDR frame_base;
1527 struct trad_frame_saved_reg *saved_regs;
1528 };
1529
1530 static struct s390_sigtramp_unwind_cache *
1531 s390_sigtramp_frame_unwind_cache (struct frame_info *this_frame,
1532 void **this_prologue_cache)
1533 {
1534 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1535 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1536 struct s390_sigtramp_unwind_cache *info;
1537 ULONGEST this_sp, prev_sp;
1538 CORE_ADDR next_ra, next_cfa, sigreg_ptr;
1539 int i;
1540
1541 if (*this_prologue_cache)
1542 return *this_prologue_cache;
1543
1544 info = FRAME_OBSTACK_ZALLOC (struct s390_sigtramp_unwind_cache);
1545 *this_prologue_cache = info;
1546 info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
1547
1548 this_sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
1549 next_ra = get_frame_pc (this_frame);
1550 next_cfa = this_sp + 16*word_size + 32;
1551
1552 /* New-style RT frame:
1553 retcode + alignment (8 bytes)
1554 siginfo (128 bytes)
1555 ucontext (contains sigregs at offset 5 words) */
1556 if (next_ra == next_cfa)
1557 {
1558 sigreg_ptr = next_cfa + 8 + 128 + align_up (5*word_size, 8);
1559 }
1560
1561 /* Old-style RT frame and all non-RT frames:
1562 old signal mask (8 bytes)
1563 pointer to sigregs */
1564 else
1565 {
1566 sigreg_ptr = read_memory_unsigned_integer (next_cfa + 8, word_size);
1567 }
1568
1569 /* The sigregs structure looks like this:
1570 long psw_mask;
1571 long psw_addr;
1572 long gprs[16];
1573 int acrs[16];
1574 int fpc;
1575 int __pad;
1576 double fprs[16]; */
1577
1578 /* Let's ignore the PSW mask, it will not be restored anyway. */
1579 sigreg_ptr += word_size;
1580
1581 /* Next comes the PSW address. */
1582 info->saved_regs[S390_PC_REGNUM].addr = sigreg_ptr;
1583 sigreg_ptr += word_size;
1584
1585 /* Then the GPRs. */
1586 for (i = 0; i < 16; i++)
1587 {
1588 info->saved_regs[S390_R0_REGNUM + i].addr = sigreg_ptr;
1589 sigreg_ptr += word_size;
1590 }
1591
1592 /* Then the ACRs. */
1593 for (i = 0; i < 16; i++)
1594 {
1595 info->saved_regs[S390_A0_REGNUM + i].addr = sigreg_ptr;
1596 sigreg_ptr += 4;
1597 }
1598
1599 /* The floating-point control word. */
1600 info->saved_regs[S390_FPC_REGNUM].addr = sigreg_ptr;
1601 sigreg_ptr += 8;
1602
1603 /* And finally the FPRs. */
1604 for (i = 0; i < 16; i++)
1605 {
1606 info->saved_regs[S390_F0_REGNUM + i].addr = sigreg_ptr;
1607 sigreg_ptr += 8;
1608 }
1609
1610 /* Restore the previous frame's SP. */
1611 prev_sp = read_memory_unsigned_integer (
1612 info->saved_regs[S390_SP_REGNUM].addr,
1613 word_size);
1614
1615 /* Determine our frame base. */
1616 info->frame_base = prev_sp + 16*word_size + 32;
1617
1618 return info;
1619 }
1620
1621 static void
1622 s390_sigtramp_frame_this_id (struct frame_info *this_frame,
1623 void **this_prologue_cache,
1624 struct frame_id *this_id)
1625 {
1626 struct s390_sigtramp_unwind_cache *info
1627 = s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
1628 *this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame));
1629 }
1630
1631 static struct value *
1632 s390_sigtramp_frame_prev_register (struct frame_info *this_frame,
1633 void **this_prologue_cache, int regnum)
1634 {
1635 struct s390_sigtramp_unwind_cache *info
1636 = s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
1637 return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
1638 }
1639
1640 static int
1641 s390_sigtramp_frame_sniffer (const struct frame_unwind *self,
1642 struct frame_info *this_frame,
1643 void **this_prologue_cache)
1644 {
1645 CORE_ADDR pc = get_frame_pc (this_frame);
1646 bfd_byte sigreturn[2];
1647
1648 if (target_read_memory (pc, sigreturn, 2))
1649 return 0;
1650
1651 if (sigreturn[0] != 0x0a /* svc */)
1652 return 0;
1653
1654 if (sigreturn[1] != 119 /* sigreturn */
1655 && sigreturn[1] != 173 /* rt_sigreturn */)
1656 return 0;
1657
1658 return 1;
1659 }
1660
1661 static const struct frame_unwind s390_sigtramp_frame_unwind = {
1662 SIGTRAMP_FRAME,
1663 s390_sigtramp_frame_this_id,
1664 s390_sigtramp_frame_prev_register,
1665 NULL,
1666 s390_sigtramp_frame_sniffer
1667 };
1668
1669
1670 /* Frame base handling. */
1671
1672 static CORE_ADDR
1673 s390_frame_base_address (struct frame_info *this_frame, void **this_cache)
1674 {
1675 struct s390_unwind_cache *info
1676 = s390_frame_unwind_cache (this_frame, this_cache);
1677 return info->frame_base;
1678 }
1679
1680 static CORE_ADDR
1681 s390_local_base_address (struct frame_info *this_frame, void **this_cache)
1682 {
1683 struct s390_unwind_cache *info
1684 = s390_frame_unwind_cache (this_frame, this_cache);
1685 return info->local_base;
1686 }
1687
1688 static const struct frame_base s390_frame_base = {
1689 &s390_frame_unwind,
1690 s390_frame_base_address,
1691 s390_local_base_address,
1692 s390_local_base_address
1693 };
1694
1695 static CORE_ADDR
1696 s390_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
1697 {
1698 ULONGEST pc;
1699 pc = frame_unwind_register_unsigned (next_frame, S390_PC_REGNUM);
1700 return gdbarch_addr_bits_remove (gdbarch, pc);
1701 }
1702
1703 static CORE_ADDR
1704 s390_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
1705 {
1706 ULONGEST sp;
1707 sp = frame_unwind_register_unsigned (next_frame, S390_SP_REGNUM);
1708 return gdbarch_addr_bits_remove (gdbarch, sp);
1709 }
1710
1711
1712 /* DWARF-2 frame support. */
1713
1714 static void
1715 s390_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
1716 struct dwarf2_frame_state_reg *reg,
1717 struct frame_info *this_frame)
1718 {
1719 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
1720
1721 switch (tdep->abi)
1722 {
1723 case ABI_LINUX_S390:
1724 /* Call-saved registers. */
1725 if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM)
1726 || regnum == S390_F4_REGNUM
1727 || regnum == S390_F6_REGNUM)
1728 reg->how = DWARF2_FRAME_REG_SAME_VALUE;
1729
1730 /* Call-clobbered registers. */
1731 else if ((regnum >= S390_R0_REGNUM && regnum <= S390_R5_REGNUM)
1732 || (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM
1733 && regnum != S390_F4_REGNUM && regnum != S390_F6_REGNUM))
1734 reg->how = DWARF2_FRAME_REG_UNDEFINED;
1735
1736 /* The return address column. */
1737 else if (regnum == S390_PC_REGNUM)
1738 reg->how = DWARF2_FRAME_REG_RA;
1739 break;
1740
1741 case ABI_LINUX_ZSERIES:
1742 /* Call-saved registers. */
1743 if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM)
1744 || (regnum >= S390_F8_REGNUM && regnum <= S390_F15_REGNUM))
1745 reg->how = DWARF2_FRAME_REG_SAME_VALUE;
1746
1747 /* Call-clobbered registers. */
1748 else if ((regnum >= S390_R0_REGNUM && regnum <= S390_R5_REGNUM)
1749 || (regnum >= S390_F0_REGNUM && regnum <= S390_F7_REGNUM))
1750 reg->how = DWARF2_FRAME_REG_UNDEFINED;
1751
1752 /* The return address column. */
1753 else if (regnum == S390_PC_REGNUM)
1754 reg->how = DWARF2_FRAME_REG_RA;
1755 break;
1756 }
1757 }
1758
1759
1760 /* Dummy function calls. */
1761
1762 /* Return non-zero if TYPE is an integer-like type, zero otherwise.
1763 "Integer-like" types are those that should be passed the way
1764 integers are: integers, enums, ranges, characters, and booleans. */
1765 static int
1766 is_integer_like (struct type *type)
1767 {
1768 enum type_code code = TYPE_CODE (type);
1769
1770 return (code == TYPE_CODE_INT
1771 || code == TYPE_CODE_ENUM
1772 || code == TYPE_CODE_RANGE
1773 || code == TYPE_CODE_CHAR
1774 || code == TYPE_CODE_BOOL);
1775 }
1776
1777 /* Return non-zero if TYPE is a pointer-like type, zero otherwise.
1778 "Pointer-like" types are those that should be passed the way
1779 pointers are: pointers and references. */
1780 static int
1781 is_pointer_like (struct type *type)
1782 {
1783 enum type_code code = TYPE_CODE (type);
1784
1785 return (code == TYPE_CODE_PTR
1786 || code == TYPE_CODE_REF);
1787 }
1788
1789
1790 /* Return non-zero if TYPE is a `float singleton' or `double
1791 singleton', zero otherwise.
1792
1793 A `T singleton' is a struct type with one member, whose type is
1794 either T or a `T singleton'. So, the following are all float
1795 singletons:
1796
1797 struct { float x };
1798 struct { struct { float x; } x; };
1799 struct { struct { struct { float x; } x; } x; };
1800
1801 ... and so on.
1802
1803 All such structures are passed as if they were floats or doubles,
1804 as the (revised) ABI says. */
1805 static int
1806 is_float_singleton (struct type *type)
1807 {
1808 if (TYPE_CODE (type) == TYPE_CODE_STRUCT && TYPE_NFIELDS (type) == 1)
1809 {
1810 struct type *singleton_type = TYPE_FIELD_TYPE (type, 0);
1811 CHECK_TYPEDEF (singleton_type);
1812
1813 return (TYPE_CODE (singleton_type) == TYPE_CODE_FLT
1814 || TYPE_CODE (singleton_type) == TYPE_CODE_DECFLOAT
1815 || is_float_singleton (singleton_type));
1816 }
1817
1818 return 0;
1819 }
1820
1821
1822 /* Return non-zero if TYPE is a struct-like type, zero otherwise.
1823 "Struct-like" types are those that should be passed as structs are:
1824 structs and unions.
1825
1826 As an odd quirk, not mentioned in the ABI, GCC passes float and
1827 double singletons as if they were a plain float, double, etc. (The
1828 corresponding union types are handled normally.) So we exclude
1829 those types here. *shrug* */
1830 static int
1831 is_struct_like (struct type *type)
1832 {
1833 enum type_code code = TYPE_CODE (type);
1834
1835 return (code == TYPE_CODE_UNION
1836 || (code == TYPE_CODE_STRUCT && ! is_float_singleton (type)));
1837 }
1838
1839
1840 /* Return non-zero if TYPE is a float-like type, zero otherwise.
1841 "Float-like" types are those that should be passed as
1842 floating-point values are.
1843
1844 You'd think this would just be floats, doubles, long doubles, etc.
1845 But as an odd quirk, not mentioned in the ABI, GCC passes float and
1846 double singletons as if they were a plain float, double, etc. (The
1847 corresponding union types are handled normally.) So we include
1848 those types here. *shrug* */
1849 static int
1850 is_float_like (struct type *type)
1851 {
1852 return (TYPE_CODE (type) == TYPE_CODE_FLT
1853 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT
1854 || is_float_singleton (type));
1855 }
1856
1857
1858 static int
1859 is_power_of_two (unsigned int n)
1860 {
1861 return ((n & (n - 1)) == 0);
1862 }
1863
1864 /* Return non-zero if TYPE should be passed as a pointer to a copy,
1865 zero otherwise. */
1866 static int
1867 s390_function_arg_pass_by_reference (struct type *type)
1868 {
1869 unsigned length = TYPE_LENGTH (type);
1870 if (length > 8)
1871 return 1;
1872
1873 /* FIXME: All complex and vector types are also returned by reference. */
1874 return is_struct_like (type) && !is_power_of_two (length);
1875 }
1876
1877 /* Return non-zero if TYPE should be passed in a float register
1878 if possible. */
1879 static int
1880 s390_function_arg_float (struct type *type)
1881 {
1882 unsigned length = TYPE_LENGTH (type);
1883 if (length > 8)
1884 return 0;
1885
1886 return is_float_like (type);
1887 }
1888
1889 /* Return non-zero if TYPE should be passed in an integer register
1890 (or a pair of integer registers) if possible. */
1891 static int
1892 s390_function_arg_integer (struct type *type)
1893 {
1894 unsigned length = TYPE_LENGTH (type);
1895 if (length > 8)
1896 return 0;
1897
1898 return is_integer_like (type)
1899 || is_pointer_like (type)
1900 || (is_struct_like (type) && is_power_of_two (length));
1901 }
1902
1903 /* Return ARG, a `SIMPLE_ARG', sign-extended or zero-extended to a full
1904 word as required for the ABI. */
1905 static LONGEST
1906 extend_simple_arg (struct value *arg)
1907 {
1908 struct type *type = value_type (arg);
1909
1910 /* Even structs get passed in the least significant bits of the
1911 register / memory word. It's not really right to extract them as
1912 an integer, but it does take care of the extension. */
1913 if (TYPE_UNSIGNED (type))
1914 return extract_unsigned_integer (value_contents (arg),
1915 TYPE_LENGTH (type));
1916 else
1917 return extract_signed_integer (value_contents (arg),
1918 TYPE_LENGTH (type));
1919 }
1920
1921
1922 /* Return the alignment required by TYPE. */
1923 static int
1924 alignment_of (struct type *type)
1925 {
1926 int alignment;
1927
1928 if (is_integer_like (type)
1929 || is_pointer_like (type)
1930 || TYPE_CODE (type) == TYPE_CODE_FLT
1931 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
1932 alignment = TYPE_LENGTH (type);
1933 else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
1934 || TYPE_CODE (type) == TYPE_CODE_UNION)
1935 {
1936 int i;
1937
1938 alignment = 1;
1939 for (i = 0; i < TYPE_NFIELDS (type); i++)
1940 {
1941 int field_alignment = alignment_of (TYPE_FIELD_TYPE (type, i));
1942
1943 if (field_alignment > alignment)
1944 alignment = field_alignment;
1945 }
1946 }
1947 else
1948 alignment = 1;
1949
1950 /* Check that everything we ever return is a power of two. Lots of
1951 code doesn't want to deal with aligning things to arbitrary
1952 boundaries. */
1953 gdb_assert ((alignment & (alignment - 1)) == 0);
1954
1955 return alignment;
1956 }
1957
1958
1959 /* Put the actual parameter values pointed to by ARGS[0..NARGS-1] in
1960 place to be passed to a function, as specified by the "GNU/Linux
1961 for S/390 ELF Application Binary Interface Supplement".
1962
1963 SP is the current stack pointer. We must put arguments, links,
1964 padding, etc. whereever they belong, and return the new stack
1965 pointer value.
1966
1967 If STRUCT_RETURN is non-zero, then the function we're calling is
1968 going to return a structure by value; STRUCT_ADDR is the address of
1969 a block we've allocated for it on the stack.
1970
1971 Our caller has taken care of any type promotions needed to satisfy
1972 prototypes or the old K&R argument-passing rules. */
1973 static CORE_ADDR
1974 s390_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
1975 struct regcache *regcache, CORE_ADDR bp_addr,
1976 int nargs, struct value **args, CORE_ADDR sp,
1977 int struct_return, CORE_ADDR struct_addr)
1978 {
1979 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
1980 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1981 ULONGEST orig_sp;
1982 int i;
1983
1984 /* If the i'th argument is passed as a reference to a copy, then
1985 copy_addr[i] is the address of the copy we made. */
1986 CORE_ADDR *copy_addr = alloca (nargs * sizeof (CORE_ADDR));
1987
1988 /* Build the reference-to-copy area. */
1989 for (i = 0; i < nargs; i++)
1990 {
1991 struct value *arg = args[i];
1992 struct type *type = value_type (arg);
1993 unsigned length = TYPE_LENGTH (type);
1994
1995 if (s390_function_arg_pass_by_reference (type))
1996 {
1997 sp -= length;
1998 sp = align_down (sp, alignment_of (type));
1999 write_memory (sp, value_contents (arg), length);
2000 copy_addr[i] = sp;
2001 }
2002 }
2003
2004 /* Reserve space for the parameter area. As a conservative
2005 simplification, we assume that everything will be passed on the
2006 stack. Since every argument larger than 8 bytes will be
2007 passed by reference, we use this simple upper bound. */
2008 sp -= nargs * 8;
2009
2010 /* After all that, make sure it's still aligned on an eight-byte
2011 boundary. */
2012 sp = align_down (sp, 8);
2013
2014 /* Finally, place the actual parameters, working from SP towards
2015 higher addresses. The code above is supposed to reserve enough
2016 space for this. */
2017 {
2018 int fr = 0;
2019 int gr = 2;
2020 CORE_ADDR starg = sp;
2021
2022 /* A struct is returned using general register 2. */
2023 if (struct_return)
2024 {
2025 regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr,
2026 struct_addr);
2027 gr++;
2028 }
2029
2030 for (i = 0; i < nargs; i++)
2031 {
2032 struct value *arg = args[i];
2033 struct type *type = value_type (arg);
2034 unsigned length = TYPE_LENGTH (type);
2035
2036 if (s390_function_arg_pass_by_reference (type))
2037 {
2038 if (gr <= 6)
2039 {
2040 regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr,
2041 copy_addr[i]);
2042 gr++;
2043 }
2044 else
2045 {
2046 write_memory_unsigned_integer (starg, word_size, copy_addr[i]);
2047 starg += word_size;
2048 }
2049 }
2050 else if (s390_function_arg_float (type))
2051 {
2052 /* The GNU/Linux for S/390 ABI uses FPRs 0 and 2 to pass arguments,
2053 the GNU/Linux for zSeries ABI uses 0, 2, 4, and 6. */
2054 if (fr <= (tdep->abi == ABI_LINUX_S390 ? 2 : 6))
2055 {
2056 /* When we store a single-precision value in an FP register,
2057 it occupies the leftmost bits. */
2058 regcache_cooked_write_part (regcache, S390_F0_REGNUM + fr,
2059 0, length, value_contents (arg));
2060 fr += 2;
2061 }
2062 else
2063 {
2064 /* When we store a single-precision value in a stack slot,
2065 it occupies the rightmost bits. */
2066 starg = align_up (starg + length, word_size);
2067 write_memory (starg - length, value_contents (arg), length);
2068 }
2069 }
2070 else if (s390_function_arg_integer (type) && length <= word_size)
2071 {
2072 if (gr <= 6)
2073 {
2074 /* Integer arguments are always extended to word size. */
2075 regcache_cooked_write_signed (regcache, S390_R0_REGNUM + gr,
2076 extend_simple_arg (arg));
2077 gr++;
2078 }
2079 else
2080 {
2081 /* Integer arguments are always extended to word size. */
2082 write_memory_signed_integer (starg, word_size,
2083 extend_simple_arg (arg));
2084 starg += word_size;
2085 }
2086 }
2087 else if (s390_function_arg_integer (type) && length == 2*word_size)
2088 {
2089 if (gr <= 5)
2090 {
2091 regcache_cooked_write (regcache, S390_R0_REGNUM + gr,
2092 value_contents (arg));
2093 regcache_cooked_write (regcache, S390_R0_REGNUM + gr + 1,
2094 value_contents (arg) + word_size);
2095 gr += 2;
2096 }
2097 else
2098 {
2099 /* If we skipped r6 because we couldn't fit a DOUBLE_ARG
2100 in it, then don't go back and use it again later. */
2101 gr = 7;
2102
2103 write_memory (starg, value_contents (arg), length);
2104 starg += length;
2105 }
2106 }
2107 else
2108 internal_error (__FILE__, __LINE__, _("unknown argument type"));
2109 }
2110 }
2111
2112 /* Allocate the standard frame areas: the register save area, the
2113 word reserved for the compiler (which seems kind of meaningless),
2114 and the back chain pointer. */
2115 sp -= 16*word_size + 32;
2116
2117 /* Store return address. */
2118 regcache_cooked_write_unsigned (regcache, S390_RETADDR_REGNUM, bp_addr);
2119
2120 /* Store updated stack pointer. */
2121 regcache_cooked_write_unsigned (regcache, S390_SP_REGNUM, sp);
2122
2123 /* We need to return the 'stack part' of the frame ID,
2124 which is actually the top of the register save area. */
2125 return sp + 16*word_size + 32;
2126 }
2127
2128 /* Assuming THIS_FRAME is a dummy, return the frame ID of that
2129 dummy frame. The frame ID's base needs to match the TOS value
2130 returned by push_dummy_call, and the PC match the dummy frame's
2131 breakpoint. */
2132 static struct frame_id
2133 s390_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
2134 {
2135 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
2136 CORE_ADDR sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
2137 sp = gdbarch_addr_bits_remove (gdbarch, sp);
2138
2139 return frame_id_build (sp + 16*word_size + 32,
2140 get_frame_pc (this_frame));
2141 }
2142
2143 static CORE_ADDR
2144 s390_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
2145 {
2146 /* Both the 32- and 64-bit ABI's say that the stack pointer should
2147 always be aligned on an eight-byte boundary. */
2148 return (addr & -8);
2149 }
2150
2151
2152 /* Function return value access. */
2153
2154 static enum return_value_convention
2155 s390_return_value_convention (struct gdbarch *gdbarch, struct type *type)
2156 {
2157 int length = TYPE_LENGTH (type);
2158 if (length > 8)
2159 return RETURN_VALUE_STRUCT_CONVENTION;
2160
2161 switch (TYPE_CODE (type))
2162 {
2163 case TYPE_CODE_STRUCT:
2164 case TYPE_CODE_UNION:
2165 case TYPE_CODE_ARRAY:
2166 return RETURN_VALUE_STRUCT_CONVENTION;
2167
2168 default:
2169 return RETURN_VALUE_REGISTER_CONVENTION;
2170 }
2171 }
2172
2173 static enum return_value_convention
2174 s390_return_value (struct gdbarch *gdbarch, struct type *func_type,
2175 struct type *type, struct regcache *regcache,
2176 gdb_byte *out, const gdb_byte *in)
2177 {
2178 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
2179 int length = TYPE_LENGTH (type);
2180 enum return_value_convention rvc =
2181 s390_return_value_convention (gdbarch, type);
2182 if (in)
2183 {
2184 switch (rvc)
2185 {
2186 case RETURN_VALUE_REGISTER_CONVENTION:
2187 if (TYPE_CODE (type) == TYPE_CODE_FLT
2188 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
2189 {
2190 /* When we store a single-precision value in an FP register,
2191 it occupies the leftmost bits. */
2192 regcache_cooked_write_part (regcache, S390_F0_REGNUM,
2193 0, length, in);
2194 }
2195 else if (length <= word_size)
2196 {
2197 /* Integer arguments are always extended to word size. */
2198 if (TYPE_UNSIGNED (type))
2199 regcache_cooked_write_unsigned (regcache, S390_R2_REGNUM,
2200 extract_unsigned_integer (in, length));
2201 else
2202 regcache_cooked_write_signed (regcache, S390_R2_REGNUM,
2203 extract_signed_integer (in, length));
2204 }
2205 else if (length == 2*word_size)
2206 {
2207 regcache_cooked_write (regcache, S390_R2_REGNUM, in);
2208 regcache_cooked_write (regcache, S390_R3_REGNUM, in + word_size);
2209 }
2210 else
2211 internal_error (__FILE__, __LINE__, _("invalid return type"));
2212 break;
2213
2214 case RETURN_VALUE_STRUCT_CONVENTION:
2215 error (_("Cannot set function return value."));
2216 break;
2217 }
2218 }
2219 else if (out)
2220 {
2221 switch (rvc)
2222 {
2223 case RETURN_VALUE_REGISTER_CONVENTION:
2224 if (TYPE_CODE (type) == TYPE_CODE_FLT
2225 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
2226 {
2227 /* When we store a single-precision value in an FP register,
2228 it occupies the leftmost bits. */
2229 regcache_cooked_read_part (regcache, S390_F0_REGNUM,
2230 0, length, out);
2231 }
2232 else if (length <= word_size)
2233 {
2234 /* Integer arguments occupy the rightmost bits. */
2235 regcache_cooked_read_part (regcache, S390_R2_REGNUM,
2236 word_size - length, length, out);
2237 }
2238 else if (length == 2*word_size)
2239 {
2240 regcache_cooked_read (regcache, S390_R2_REGNUM, out);
2241 regcache_cooked_read (regcache, S390_R3_REGNUM, out + word_size);
2242 }
2243 else
2244 internal_error (__FILE__, __LINE__, _("invalid return type"));
2245 break;
2246
2247 case RETURN_VALUE_STRUCT_CONVENTION:
2248 error (_("Function return value unknown."));
2249 break;
2250 }
2251 }
2252
2253 return rvc;
2254 }
2255
2256
2257 /* Breakpoints. */
2258
2259 static const gdb_byte *
2260 s390_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr)
2261 {
2262 static const gdb_byte breakpoint[] = { 0x0, 0x1 };
2263
2264 *lenptr = sizeof (breakpoint);
2265 return breakpoint;
2266 }
2267
2268
2269 /* Address handling. */
2270
2271 static CORE_ADDR
2272 s390_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
2273 {
2274 return addr & 0x7fffffff;
2275 }
2276
2277 static int
2278 s390_address_class_type_flags (int byte_size, int dwarf2_addr_class)
2279 {
2280 if (byte_size == 4)
2281 return TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
2282 else
2283 return 0;
2284 }
2285
2286 static const char *
2287 s390_address_class_type_flags_to_name (struct gdbarch *gdbarch, int type_flags)
2288 {
2289 if (type_flags & TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1)
2290 return "mode32";
2291 else
2292 return NULL;
2293 }
2294
2295 static int
2296 s390_address_class_name_to_type_flags (struct gdbarch *gdbarch, const char *name,
2297 int *type_flags_ptr)
2298 {
2299 if (strcmp (name, "mode32") == 0)
2300 {
2301 *type_flags_ptr = TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
2302 return 1;
2303 }
2304 else
2305 return 0;
2306 }
2307
2308 /* Set up gdbarch struct. */
2309
2310 static struct gdbarch *
2311 s390_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
2312 {
2313 struct gdbarch *gdbarch;
2314 struct gdbarch_tdep *tdep;
2315
2316 /* First see if there is already a gdbarch that can satisfy the request. */
2317 arches = gdbarch_list_lookup_by_info (arches, &info);
2318 if (arches != NULL)
2319 return arches->gdbarch;
2320
2321 /* None found: is the request for a s390 architecture? */
2322 if (info.bfd_arch_info->arch != bfd_arch_s390)
2323 return NULL; /* No; then it's not for us. */
2324
2325 /* Yes: create a new gdbarch for the specified machine type. */
2326 tdep = XCALLOC (1, struct gdbarch_tdep);
2327 gdbarch = gdbarch_alloc (&info, tdep);
2328
2329 set_gdbarch_believe_pcc_promotion (gdbarch, 0);
2330 set_gdbarch_char_signed (gdbarch, 0);
2331
2332 /* S/390 GNU/Linux uses either 64-bit or 128-bit long doubles.
2333 We can safely let them default to 128-bit, since the debug info
2334 will give the size of type actually used in each case. */
2335 set_gdbarch_long_double_bit (gdbarch, 128);
2336 set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad);
2337
2338 /* Amount PC must be decremented by after a breakpoint. This is
2339 often the number of bytes returned by gdbarch_breakpoint_from_pc but not
2340 always. */
2341 set_gdbarch_decr_pc_after_break (gdbarch, 2);
2342 /* Stack grows downward. */
2343 set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
2344 set_gdbarch_breakpoint_from_pc (gdbarch, s390_breakpoint_from_pc);
2345 set_gdbarch_skip_prologue (gdbarch, s390_skip_prologue);
2346 set_gdbarch_in_function_epilogue_p (gdbarch, s390_in_function_epilogue_p);
2347
2348 set_gdbarch_pc_regnum (gdbarch, S390_PC_REGNUM);
2349 set_gdbarch_sp_regnum (gdbarch, S390_SP_REGNUM);
2350 set_gdbarch_fp0_regnum (gdbarch, S390_F0_REGNUM);
2351 set_gdbarch_num_regs (gdbarch, S390_NUM_REGS);
2352 set_gdbarch_num_pseudo_regs (gdbarch, S390_NUM_PSEUDO_REGS);
2353 set_gdbarch_register_name (gdbarch, s390_register_name);
2354 set_gdbarch_register_type (gdbarch, s390_register_type);
2355 set_gdbarch_stab_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum);
2356 set_gdbarch_dwarf2_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum);
2357 set_gdbarch_value_from_register (gdbarch, s390_value_from_register);
2358 set_gdbarch_register_reggroup_p (gdbarch, s390_register_reggroup_p);
2359 set_gdbarch_regset_from_core_section (gdbarch,
2360 s390_regset_from_core_section);
2361
2362 /* Inferior function calls. */
2363 set_gdbarch_push_dummy_call (gdbarch, s390_push_dummy_call);
2364 set_gdbarch_dummy_id (gdbarch, s390_dummy_id);
2365 set_gdbarch_frame_align (gdbarch, s390_frame_align);
2366 set_gdbarch_return_value (gdbarch, s390_return_value);
2367
2368 /* Frame handling. */
2369 dwarf2_frame_set_init_reg (gdbarch, s390_dwarf2_frame_init_reg);
2370 dwarf2_append_unwinders (gdbarch);
2371 frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer);
2372 frame_unwind_append_unwinder (gdbarch, &s390_stub_frame_unwind);
2373 frame_unwind_append_unwinder (gdbarch, &s390_sigtramp_frame_unwind);
2374 frame_unwind_append_unwinder (gdbarch, &s390_frame_unwind);
2375 frame_base_set_default (gdbarch, &s390_frame_base);
2376 set_gdbarch_unwind_pc (gdbarch, s390_unwind_pc);
2377 set_gdbarch_unwind_sp (gdbarch, s390_unwind_sp);
2378
2379 switch (info.bfd_arch_info->mach)
2380 {
2381 case bfd_mach_s390_31:
2382 tdep->abi = ABI_LINUX_S390;
2383
2384 tdep->gregset = &s390_gregset;
2385 tdep->sizeof_gregset = s390_sizeof_gregset;
2386 tdep->fpregset = &s390_fpregset;
2387 tdep->sizeof_fpregset = s390_sizeof_fpregset;
2388
2389 set_gdbarch_addr_bits_remove (gdbarch, s390_addr_bits_remove);
2390 set_gdbarch_pseudo_register_read (gdbarch, s390_pseudo_register_read);
2391 set_gdbarch_pseudo_register_write (gdbarch, s390_pseudo_register_write);
2392 set_solib_svr4_fetch_link_map_offsets
2393 (gdbarch, svr4_ilp32_fetch_link_map_offsets);
2394
2395 break;
2396 case bfd_mach_s390_64:
2397 tdep->abi = ABI_LINUX_ZSERIES;
2398
2399 tdep->gregset = &s390x_gregset;
2400 tdep->sizeof_gregset = s390x_sizeof_gregset;
2401 tdep->fpregset = &s390_fpregset;
2402 tdep->sizeof_fpregset = s390_sizeof_fpregset;
2403
2404 set_gdbarch_long_bit (gdbarch, 64);
2405 set_gdbarch_long_long_bit (gdbarch, 64);
2406 set_gdbarch_ptr_bit (gdbarch, 64);
2407 set_gdbarch_pseudo_register_read (gdbarch, s390x_pseudo_register_read);
2408 set_gdbarch_pseudo_register_write (gdbarch, s390x_pseudo_register_write);
2409 set_solib_svr4_fetch_link_map_offsets
2410 (gdbarch, svr4_lp64_fetch_link_map_offsets);
2411 set_gdbarch_address_class_type_flags (gdbarch,
2412 s390_address_class_type_flags);
2413 set_gdbarch_address_class_type_flags_to_name (gdbarch,
2414 s390_address_class_type_flags_to_name);
2415 set_gdbarch_address_class_name_to_type_flags (gdbarch,
2416 s390_address_class_name_to_type_flags);
2417 break;
2418 }
2419
2420 set_gdbarch_print_insn (gdbarch, print_insn_s390);
2421
2422 set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
2423
2424 /* Enable TLS support. */
2425 set_gdbarch_fetch_tls_load_module_address (gdbarch,
2426 svr4_fetch_objfile_link_map);
2427
2428 return gdbarch;
2429 }
2430
2431
2432
2433 extern initialize_file_ftype _initialize_s390_tdep; /* -Wmissing-prototypes */
2434
2435 void
2436 _initialize_s390_tdep (void)
2437 {
2438
2439 /* Hook us into the gdbarch mechanism. */
2440 register_gdbarch_init (bfd_arch_s390, s390_gdbarch_init);
2441 }
This page took 0.081718 seconds and 5 git commands to generate.