This commit was generated by cvs2svn to track changes on a CVS vendor
[deliverable/binutils-gdb.git] / include / elf / xtensa.h
1 /* Xtensa ELF support for BFD.
2 Copyright 2003, 2004 Free Software Foundation, Inc.
3 Contributed by Bob Wilson (bwilson@tensilica.com) at Tensilica.
4
5 This file is part of BFD, the Binary File Descriptor library.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301,
20 USA. */
21
22 /* This file holds definitions specific to the Xtensa ELF ABI. */
23
24 #ifndef _ELF_XTENSA_H
25 #define _ELF_XTENSA_H
26
27 #include "elf/reloc-macros.h"
28
29 /* Relocations. */
30 START_RELOC_NUMBERS (elf_xtensa_reloc_type)
31 RELOC_NUMBER (R_XTENSA_NONE, 0)
32 RELOC_NUMBER (R_XTENSA_32, 1)
33 RELOC_NUMBER (R_XTENSA_RTLD, 2)
34 RELOC_NUMBER (R_XTENSA_GLOB_DAT, 3)
35 RELOC_NUMBER (R_XTENSA_JMP_SLOT, 4)
36 RELOC_NUMBER (R_XTENSA_RELATIVE, 5)
37 RELOC_NUMBER (R_XTENSA_PLT, 6)
38 RELOC_NUMBER (R_XTENSA_OP0, 8)
39 RELOC_NUMBER (R_XTENSA_OP1, 9)
40 RELOC_NUMBER (R_XTENSA_OP2, 10)
41 RELOC_NUMBER (R_XTENSA_ASM_EXPAND, 11)
42 RELOC_NUMBER (R_XTENSA_ASM_SIMPLIFY, 12)
43 RELOC_NUMBER (R_XTENSA_GNU_VTINHERIT, 15)
44 RELOC_NUMBER (R_XTENSA_GNU_VTENTRY, 16)
45 RELOC_NUMBER (R_XTENSA_DIFF8, 17)
46 RELOC_NUMBER (R_XTENSA_DIFF16, 18)
47 RELOC_NUMBER (R_XTENSA_DIFF32, 19)
48 RELOC_NUMBER (R_XTENSA_SLOT0_OP, 20)
49 RELOC_NUMBER (R_XTENSA_SLOT1_OP, 21)
50 RELOC_NUMBER (R_XTENSA_SLOT2_OP, 22)
51 RELOC_NUMBER (R_XTENSA_SLOT3_OP, 23)
52 RELOC_NUMBER (R_XTENSA_SLOT4_OP, 24)
53 RELOC_NUMBER (R_XTENSA_SLOT5_OP, 25)
54 RELOC_NUMBER (R_XTENSA_SLOT6_OP, 26)
55 RELOC_NUMBER (R_XTENSA_SLOT7_OP, 27)
56 RELOC_NUMBER (R_XTENSA_SLOT8_OP, 28)
57 RELOC_NUMBER (R_XTENSA_SLOT9_OP, 29)
58 RELOC_NUMBER (R_XTENSA_SLOT10_OP, 30)
59 RELOC_NUMBER (R_XTENSA_SLOT11_OP, 31)
60 RELOC_NUMBER (R_XTENSA_SLOT12_OP, 32)
61 RELOC_NUMBER (R_XTENSA_SLOT13_OP, 33)
62 RELOC_NUMBER (R_XTENSA_SLOT14_OP, 34)
63 RELOC_NUMBER (R_XTENSA_SLOT0_ALT, 35)
64 RELOC_NUMBER (R_XTENSA_SLOT1_ALT, 36)
65 RELOC_NUMBER (R_XTENSA_SLOT2_ALT, 37)
66 RELOC_NUMBER (R_XTENSA_SLOT3_ALT, 38)
67 RELOC_NUMBER (R_XTENSA_SLOT4_ALT, 39)
68 RELOC_NUMBER (R_XTENSA_SLOT5_ALT, 40)
69 RELOC_NUMBER (R_XTENSA_SLOT6_ALT, 41)
70 RELOC_NUMBER (R_XTENSA_SLOT7_ALT, 42)
71 RELOC_NUMBER (R_XTENSA_SLOT8_ALT, 43)
72 RELOC_NUMBER (R_XTENSA_SLOT9_ALT, 44)
73 RELOC_NUMBER (R_XTENSA_SLOT10_ALT, 45)
74 RELOC_NUMBER (R_XTENSA_SLOT11_ALT, 46)
75 RELOC_NUMBER (R_XTENSA_SLOT12_ALT, 47)
76 RELOC_NUMBER (R_XTENSA_SLOT13_ALT, 48)
77 RELOC_NUMBER (R_XTENSA_SLOT14_ALT, 49)
78 END_RELOC_NUMBERS (R_XTENSA_max)
79
80 /* Processor-specific flags for the ELF header e_flags field. */
81
82 /* Four-bit Xtensa machine type field. */
83 #define EF_XTENSA_MACH 0x0000000f
84
85 /* Various CPU types. */
86 #define E_XTENSA_MACH 0x00000000
87
88 /* Leave bits 0xf0 alone in case we ever have more than 16 cpu types.
89 Highly unlikely, but what the heck. */
90
91 #define EF_XTENSA_XT_INSN 0x00000100
92 #define EF_XTENSA_XT_LIT 0x00000200
93
94
95 /* Processor-specific dynamic array tags. */
96
97 /* Offset of the table that records the GOT location(s). */
98 #define DT_XTENSA_GOT_LOC_OFF 0x70000000
99
100 /* Number of entries in the GOT location table. */
101 #define DT_XTENSA_GOT_LOC_SZ 0x70000001
102
103
104 /* Definitions for instruction and literal property tables. The
105 tables for ".gnu.linkonce.*" sections are placed in the following
106 sections:
107
108 instruction tables: .gnu.linkonce.x.*
109 literal tables: .gnu.linkonce.p.*
110 */
111
112 #define XTENSA_INSN_SEC_NAME ".xt.insn"
113 #define XTENSA_LIT_SEC_NAME ".xt.lit"
114 #define XTENSA_PROP_SEC_NAME ".xt.prop"
115
116 typedef struct property_table_entry_t
117 {
118 bfd_vma address;
119 bfd_vma size;
120 flagword flags;
121 } property_table_entry;
122
123 /* Flags in the property tables to specify whether blocks of memory are
124 literals, instructions, data, or unreachable. For instructions,
125 blocks that begin loop targets and branch targets are designated.
126 Blocks that do not allow density instructions, instruction reordering
127 or transformation are also specified. Finally, for branch targets,
128 branch target alignment priority is included. Alignment of the next
129 block is specified in the current block and the size of the current
130 block does not include any fill required to align to the next
131 block. */
132
133 #define XTENSA_PROP_LITERAL 0x00000001
134 #define XTENSA_PROP_INSN 0x00000002
135 #define XTENSA_PROP_DATA 0x00000004
136 #define XTENSA_PROP_UNREACHABLE 0x00000008
137 /* Instruction-only properties at beginning of code. */
138 #define XTENSA_PROP_INSN_LOOP_TARGET 0x00000010
139 #define XTENSA_PROP_INSN_BRANCH_TARGET 0x00000020
140 /* Instruction-only properties about code. */
141 #define XTENSA_PROP_INSN_NO_DENSITY 0x00000040
142 #define XTENSA_PROP_INSN_NO_REORDER 0x00000080
143 #define XTENSA_PROP_INSN_NO_TRANSFORM 0x00000100
144
145 /* Branch target alignment information. This transmits information
146 to the linker optimization about the priority of aligning a
147 particular block for branch target alignment: None, low priority,
148 high priority, or required. These only need to be checked in
149 instruction blocks marked as XTENSA_PROP_INSN_BRANCH_TARGET.
150 Common usage is:
151
152 switch (GET_XTENSA_PROP_BT_ALIGN(flags))
153 case XTENSA_PROP_BT_ALIGN_NONE:
154 case XTENSA_PROP_BT_ALIGN_LOW:
155 case XTENSA_PROP_BT_ALIGN_HIGH:
156 case XTENSA_PROP_BT_ALIGN_REQUIRE:
157 */
158 #define XTENSA_PROP_BT_ALIGN_MASK 0x00000600
159
160 /* No branch target alignment. */
161 #define XTENSA_PROP_BT_ALIGN_NONE 0x0
162 /* Low priority branch target alignment. */
163 #define XTENSA_PROP_BT_ALIGN_LOW 0x1
164 /* High priority branch target alignment. */
165 #define XTENSA_PROP_BT_ALIGN_HIGH 0x2
166 /* Required branch target alignment. */
167 #define XTENSA_PROP_BT_ALIGN_REQUIRE 0x3
168
169 #define GET_XTENSA_PROP_BT_ALIGN(flag) \
170 (((unsigned)((flag) & (XTENSA_PROP_BT_ALIGN_MASK))) >> 9)
171 #define SET_XTENSA_PROP_BT_ALIGN(flag, align) \
172 (((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \
173 (((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK))
174
175 /* Alignment is specified in the block BEFORE the one that needs
176 alignment. Up to 5 bits. Use GET_XTENSA_PROP_ALIGNMENT(flags) to
177 get the required alignment specified as a power of 2. Use
178 SET_XTENSA_PROP_ALIGNMENT(flags, pow2) to set the required
179 alignment. Be careful of side effects since the SET will evaluate
180 flags twice. Also, note that the SIZE of a block in the property
181 table does not include the alignment size, so the alignment fill
182 must be calculated to determine if two blocks are contiguous.
183 TEXT_ALIGN is not currently implemented but is a placeholder for a
184 possible future implementation. */
185
186 #define XTENSA_PROP_ALIGN 0x00000800
187
188 #define XTENSA_PROP_ALIGNMENT_MASK 0x0001f000
189
190 #define GET_XTENSA_PROP_ALIGNMENT(flag) \
191 (((unsigned)((flag) & (XTENSA_PROP_ALIGNMENT_MASK))) >> 12)
192 #define SET_XTENSA_PROP_ALIGNMENT(flag, align) \
193 (((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \
194 (((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK))
195
196 #define XTENSA_PROP_INSN_ABSLIT 0x00020000
197
198 #endif /* _ELF_XTENSA_H */
This page took 0.050465 seconds and 5 git commands to generate.