Merge remote-tracking branches 'spi/topic/spidev-test', 'spi/topic/ti-qspi', 'spi...
[deliverable/linux.git] / include / sound / hda_register.h
1 /*
2 * HD-audio controller (Azalia) registers and helpers
3 *
4 * For traditional reasons, we still use azx_ prefix here
5 */
6
7 #ifndef __SOUND_HDA_REGISTER_H
8 #define __SOUND_HDA_REGISTER_H
9
10 #include <linux/io.h>
11 #include <sound/hdaudio.h>
12
13 #define AZX_REG_GCAP 0x00
14 #define AZX_GCAP_64OK (1 << 0) /* 64bit address support */
15 #define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */
16 #define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */
17 #define AZX_GCAP_ISS (15 << 8) /* # of input streams */
18 #define AZX_GCAP_OSS (15 << 12) /* # of output streams */
19 #define AZX_REG_VMIN 0x02
20 #define AZX_REG_VMAJ 0x03
21 #define AZX_REG_OUTPAY 0x04
22 #define AZX_REG_INPAY 0x06
23 #define AZX_REG_GCTL 0x08
24 #define AZX_GCTL_RESET (1 << 0) /* controller reset */
25 #define AZX_GCTL_FCNTRL (1 << 1) /* flush control */
26 #define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
27 #define AZX_REG_WAKEEN 0x0c
28 #define AZX_REG_STATESTS 0x0e
29 #define AZX_REG_GSTS 0x10
30 #define AZX_GSTS_FSTS (1 << 1) /* flush status */
31 #define AZX_REG_GCAP2 0x12
32 #define AZX_REG_LLCH 0x14
33 #define AZX_REG_OUTSTRMPAY 0x18
34 #define AZX_REG_INSTRMPAY 0x1A
35 #define AZX_REG_INTCTL 0x20
36 #define AZX_REG_INTSTS 0x24
37 #define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
38 #define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
39 #define AZX_REG_SSYNC 0x38
40 #define AZX_REG_CORBLBASE 0x40
41 #define AZX_REG_CORBUBASE 0x44
42 #define AZX_REG_CORBWP 0x48
43 #define AZX_REG_CORBRP 0x4a
44 #define AZX_CORBRP_RST (1 << 15) /* read pointer reset */
45 #define AZX_REG_CORBCTL 0x4c
46 #define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */
47 #define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
48 #define AZX_REG_CORBSTS 0x4d
49 #define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */
50 #define AZX_REG_CORBSIZE 0x4e
51
52 #define AZX_REG_RIRBLBASE 0x50
53 #define AZX_REG_RIRBUBASE 0x54
54 #define AZX_REG_RIRBWP 0x58
55 #define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */
56 #define AZX_REG_RINTCNT 0x5a
57 #define AZX_REG_RIRBCTL 0x5c
58 #define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
59 #define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */
60 #define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
61 #define AZX_REG_RIRBSTS 0x5d
62 #define AZX_RBSTS_IRQ (1 << 0) /* response irq */
63 #define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */
64 #define AZX_REG_RIRBSIZE 0x5e
65
66 #define AZX_REG_IC 0x60
67 #define AZX_REG_IR 0x64
68 #define AZX_REG_IRS 0x68
69 #define AZX_IRS_VALID (1<<1)
70 #define AZX_IRS_BUSY (1<<0)
71
72 #define AZX_REG_DPLBASE 0x70
73 #define AZX_REG_DPUBASE 0x74
74 #define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */
75
76 /* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
77 enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
78
79 /* stream register offsets from stream base */
80 #define AZX_REG_SD_CTL 0x00
81 #define AZX_REG_SD_STS 0x03
82 #define AZX_REG_SD_LPIB 0x04
83 #define AZX_REG_SD_CBL 0x08
84 #define AZX_REG_SD_LVI 0x0c
85 #define AZX_REG_SD_FIFOW 0x0e
86 #define AZX_REG_SD_FIFOSIZE 0x10
87 #define AZX_REG_SD_FORMAT 0x12
88 #define AZX_REG_SD_FIFOL 0x14
89 #define AZX_REG_SD_BDLPL 0x18
90 #define AZX_REG_SD_BDLPU 0x1c
91
92 /* Haswell/Broadwell display HD-A controller Extended Mode registers */
93 #define AZX_REG_HSW_EM4 0x100c
94 #define AZX_REG_HSW_EM5 0x1010
95
96 /* Skylake/Broxton display HD-A controller Extended Mode registers */
97 #define AZX_REG_SKL_EM4L 0x1040
98
99 /* PCI space */
100 #define AZX_PCIREG_TCSEL 0x44
101
102 /*
103 * other constants
104 */
105
106 /* max number of fragments - we may use more if allocating more pages for BDL */
107 #define BDL_SIZE 4096
108 #define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
109 #define AZX_MAX_FRAG 32
110 /* max buffer size - no h/w limit, you can increase as you like */
111 #define AZX_MAX_BUF_SIZE (1024*1024*1024)
112
113 /* RIRB int mask: overrun[2], response[0] */
114 #define RIRB_INT_RESPONSE 0x01
115 #define RIRB_INT_OVERRUN 0x04
116 #define RIRB_INT_MASK 0x05
117
118 /* STATESTS int mask: S3,SD2,SD1,SD0 */
119 #define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1)
120
121 /* SD_CTL bits */
122 #define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
123 #define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
124 #define SD_CTL_STRIPE (3 << 16) /* stripe control */
125 #define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
126 #define SD_CTL_DIR (1 << 19) /* bi-directional stream */
127 #define SD_CTL_STREAM_TAG_MASK (0xf << 20)
128 #define SD_CTL_STREAM_TAG_SHIFT 20
129
130 /* SD_CTL and SD_STS */
131 #define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
132 #define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
133 #define SD_INT_COMPLETE 0x04 /* completion interrupt */
134 #define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
135 SD_INT_COMPLETE)
136
137 /* SD_STS */
138 #define SD_STS_FIFO_READY 0x20 /* FIFO ready */
139
140 /* INTCTL and INTSTS */
141 #define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */
142 #define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
143 #define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
144
145 /* below are so far hardcoded - should read registers in future */
146 #define AZX_MAX_CORB_ENTRIES 256
147 #define AZX_MAX_RIRB_ENTRIES 256
148
149 /* Capability header Structure */
150 #define AZX_REG_CAP_HDR 0x0
151 #define AZX_CAP_HDR_VER_OFF 28
152 #define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF)
153 #define AZX_CAP_HDR_ID_OFF 16
154 #define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF)
155 #define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF
156
157 /* registers of Software Position Based FIFO Capability Structure */
158 #define AZX_SPB_CAP_ID 0x4
159 #define AZX_REG_SPB_BASE_ADDR 0x700
160 #define AZX_REG_SPB_SPBFCH 0x00
161 #define AZX_REG_SPB_SPBFCCTL 0x04
162 /* Base used to calculate the iterating register offset */
163 #define AZX_SPB_BASE 0x08
164 /* Interval used to calculate the iterating register offset */
165 #define AZX_SPB_INTERVAL 0x08
166 /* SPIB base */
167 #define AZX_SPB_SPIB 0x00
168 /* SPIB MAXFIFO base*/
169 #define AZX_SPB_MAXFIFO 0x04
170
171 /* registers of Global Time Synchronization Capability Structure */
172 #define AZX_GTS_CAP_ID 0x1
173 #define AZX_REG_GTS_GTSCH 0x00
174 #define AZX_REG_GTS_GTSCD 0x04
175 #define AZX_REG_GTS_GTSCTLAC 0x0C
176 #define AZX_GTS_BASE 0x20
177 #define AZX_GTS_INTERVAL 0x20
178
179 /* registers for Processing Pipe Capability Structure */
180 #define AZX_PP_CAP_ID 0x3
181 #define AZX_REG_PP_PPCH 0x10
182 #define AZX_REG_PP_PPCTL 0x04
183 #define AZX_PPCTL_PIE (1<<31)
184 #define AZX_PPCTL_GPROCEN (1<<30)
185 /* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */
186 #define AZX_PPCTL_PROCEN(_X_) (1<<(_X_))
187
188 #define AZX_REG_PP_PPSTS 0x08
189
190 #define AZX_PPHC_BASE 0x10
191 #define AZX_PPHC_INTERVAL 0x10
192
193 #define AZX_REG_PPHCLLPL 0x0
194 #define AZX_REG_PPHCLLPU 0x4
195 #define AZX_REG_PPHCLDPL 0x8
196 #define AZX_REG_PPHCLDPU 0xC
197
198 #define AZX_PPLC_BASE 0x10
199 #define AZX_PPLC_MULTI 0x10
200 #define AZX_PPLC_INTERVAL 0x10
201
202 #define AZX_REG_PPLCCTL 0x0
203 #define AZX_PPLCCTL_STRM_BITS 4
204 #define AZX_PPLCCTL_STRM_SHIFT 20
205 #define AZX_REG_MASK(bit_num, offset) \
206 (((1 << (bit_num)) - 1) << (offset))
207 #define AZX_PPLCCTL_STRM_MASK \
208 AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT)
209 #define AZX_PPLCCTL_RUN (1<<1)
210 #define AZX_PPLCCTL_STRST (1<<0)
211
212 #define AZX_REG_PPLCFMT 0x4
213 #define AZX_REG_PPLCLLPL 0x8
214 #define AZX_REG_PPLCLLPU 0xC
215
216 /* registers for Multiple Links Capability Structure */
217 #define AZX_ML_CAP_ID 0x2
218 #define AZX_REG_ML_MLCH 0x00
219 #define AZX_REG_ML_MLCD 0x04
220 #define AZX_ML_BASE 0x40
221 #define AZX_ML_INTERVAL 0x40
222
223 #define AZX_REG_ML_LCAP 0x00
224 #define AZX_REG_ML_LCTL 0x04
225 #define AZX_REG_ML_LOSIDV 0x08
226 #define AZX_REG_ML_LSDIID 0x0C
227 #define AZX_REG_ML_LPSOO 0x10
228 #define AZX_REG_ML_LPSIO 0x12
229 #define AZX_REG_ML_LWALFC 0x18
230 #define AZX_REG_ML_LOUTPAY 0x20
231 #define AZX_REG_ML_LINPAY 0x30
232
233 #define AZX_MLCTL_SPA (1<<16)
234 #define AZX_MLCTL_CPA 23
235
236
237 /* registers for DMA Resume Capability Structure */
238 #define AZX_DRSM_CAP_ID 0x5
239 #define AZX_REG_DRSM_CTL 0x4
240 /* Base used to calculate the iterating register offset */
241 #define AZX_DRSM_BASE 0x08
242 /* Interval used to calculate the iterating register offset */
243 #define AZX_DRSM_INTERVAL 0x08
244
245 /*
246 * helpers to read the stream position
247 */
248 static inline unsigned int
249 snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream)
250 {
251 return snd_hdac_stream_readl(stream, SD_LPIB);
252 }
253
254 static inline unsigned int
255 snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream)
256 {
257 return le32_to_cpu(*stream->posbuf);
258 }
259
260 #endif /* __SOUND_HDA_REGISTER_H */
This page took 0.040007 seconds and 5 git commands to generate.