ld/scripttempl/elfxgate.sc

   1 #
   2 # Unusual variables checked by this code:
   3 #       NOP - four byte opcode for no-op (defaults to 0)
   4 #       DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
   5 #       OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
   6 #               (e.g., .PARISC.global)
   7 #       OTHER_SECTIONS - at the end
   8 #       EXECUTABLE_SYMBOLS - symbols that must be defined for an
   9 #               executable (e.g., _DYNAMIC_LINK)
  10 #       TEXT_START_SYMBOLS - symbols that appear at the start of the
  11 #               .text section.
  12 #       DATA_START_SYMBOLS - symbols that appear at the start of the
  13 #               .data section.
  14 #       OTHER_BSS_SYMBOLS - symbols that appear at the start of the
  15 #               .bss section besides __bss_start.
  16 #       EMBEDDED - whether this is for an embedded system.
  17 #
  18 # When adding sections, do note that the names of some sections are used
  19 # when specifying the start address of the next.
  20 #
  21 test -z "$ENTRY" && ENTRY=_start
  22 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  23 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  24 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
  25 test "$LD_FLAG" = "N" && DATA_ADDR=.
  26
  27 CTOR=".ctors ${CONSTRUCTING-0} :
  28   {
  29     ${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
  30     ${CONSTRUCTING+${CTOR_START}}
  31     KEEP (*(.ctors))
  32
  33     ${CONSTRUCTING+${CTOR_END}}
  34     ${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
  35   } ${RELOCATING+ > ${TEXT_MEMORY}}"
  36
  37 DTOR="  .dtors  ${CONSTRUCTING-0} :
  38   {
  39     ${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
  40     KEEP (*(.dtors))
  41     ${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
  42   } ${RELOCATING+ > ${TEXT_MEMORY}}"
  43
  44
  45 VECTORS="
  46   /* If the 'vectors_addr' symbol is defined, it indicates the start address
  47      of interrupt vectors.  This depends on the 68HC11 operating mode:
  48
  49                         Addr
  50      Single chip        0xffc0
  51      Extended mode      0xffc0
  52      Bootstrap          0x00c0
  53      Test               0xbfc0
  54
  55      In general, the vectors address is 0xffc0.  This can be overriden
  56      with the '-defsym vectors_addr=0xbfc0' ld option.
  57
  58      Note: for the bootstrap mode, the interrupt vectors are at 0xbfc0 but
  59      they are redirected to 0x00c0 by the internal PROM.  Application's vectors
  60      must also consist of jump instructions (see Motorola's manual).  */
  61
  62   PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xffc0);
  63   .vectors DEFINED (vectors_addr) ? vectors_addr : 0xffc0 :
  64   {
  65     KEEP (*(.vectors))
  66   }"
  67
  68 #
  69 # We provide two emulations: a fixed on that defines some memory banks
  70 # and a configurable one that includes a user provided memory definition.
  71 #
  72 case $GENERIC_BOARD in
  73   yes|1|YES)
  74         MEMORY_DEF="
  75 /* Get memory banks definition from some user configuration file.
  76    This file must be located in some linker directory (search path
  77    with -L<dir>). See fixed memory banks emulation script.  */
  78 INCLUDE memory.x;
  79 "
  80         ;;
  81   *)
  82 MEMORY_DEF="
  83 /* Fixed definition of the available memory banks.
  84    See generic emulation script for a user defined configuration.  */
  85 MEMORY
  86 {
  87   page0 (rwx) : ORIGIN = 0x0, LENGTH = 256
  88   text  (rx)  : ORIGIN = ${ROM_START_ADDR}, LENGTH = ${ROM_SIZE}
  89   data        : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
  90   eeprom      : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
  91 }
  92
  93 /* Setup the stack on the top of the data memory bank.  */
  94 PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
  95 "
  96         ;;
  97 esac
  98
  99 STARTUP_CODE="
 100     /* Startup code.  */
 101     KEEP (*(.install0)) /* Section should setup the stack pointer.  */
 102     KEEP (*(.install1)) /* Place holder for applications.  */
 103     KEEP (*(.install2)) /* Optional installation of data sections in RAM.  */
 104     KEEP (*(.install3)) /* Place holder for applications.  */
 105     KEEP (*(.install4)) /* Section that calls the main.  */
 106 "
 107
 108 FINISH_CODE="
 109     /* Finish code.  */
 110     KEEP (*(.fini0))    /* Beginning of finish code (_exit symbol).  */
 111     KEEP (*(.fini1))    /* Place holder for applications.  */
 112     KEEP (*(.fini2))    /* C++ destructors.  */
 113     KEEP (*(.fini3))    /* Place holder for applications.  */
 114     KEEP (*(.fini4))    /* Runtime exit.  */
 115 "
 116
 117 PRE_COMPUTE_DATA_SIZE="
 118 /* SCz: this does not work yet... This is supposed to force the loading
 119    of _map_data.o (from libgcc.a) when the .data section is not empty.
 120    By doing so, this should bring the code that copies the .data section
 121    from ROM to RAM at init time.
 122
 123   ___pre_comp_data_size = SIZEOF(.data);
 124   __install_data_sections = ___pre_comp_data_size > 0 ?
 125                 __map_data_sections : 0;
 126 */
 127 "
 128
 129 INSTALL_RELOC="
 130   .install0 0 : { *(.install0) }
 131   .install1 0 : { *(.install1) }
 132   .install2 0 : { *(.install2) }
 133   .install3 0 : { *(.install3) }
 134   .install4 0 : { *(.install4) }
 135 "
 136
 137 FINISH_RELOC="
 138   .fini0 0 : { *(.fini0) }
 139   .fini1 0 : { *(.fini1) }
 140   .fini2 0 : { *(.fini2) }
 141   .fini3 0 : { *(.fini3) }
 142   .fini4 0 : { *(.fini4) }
 143 "
 144
 145 BSS_DATA_RELOC="
 146   .data1 0 : { *(.data1) }
 147
 148   /* We want the small data sections together, so single-instruction offsets
 149      can access them all, and initialized data all before uninitialized, so
 150      we can shorten the on-disk segment size.  */
 151   .sdata   0 : { *(.sdata) }
 152   .sbss    0 : { *(.sbss) }
 153   .scommon 0 : { *(.scommon) }
 154 "
 155
 156 SOFT_REGS_RELOC="
 157   .softregs 0 : { *(.softregs) }
 158 "
 159
 160 cat <<EOF
 161 ${RELOCATING+/* Linker script for 68HC12 executable (PROM).  */}
 162 ${RELOCATING-/* Linker script for 68HC12 object file (ld -r).  */}
 163
 164 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
 165               "${LITTLE_OUTPUT_FORMAT}")
 166 OUTPUT_ARCH(${OUTPUT_ARCH})
 167 ${RELOCATING+ENTRY(${ENTRY})}
 168
 169 ${RELOCATING+${LIB_SEARCH_DIRS}}
 170 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
 171 ${RELOCATING+${MEMORY_DEF}}
 172
 173 SECTIONS
 174 {
 175   .hash        ${RELOCATING-0} : { *(.hash)             }
 176   .dynsym      ${RELOCATING-0} : { *(.dynsym)           }
 177   .dynstr      ${RELOCATING-0} : { *(.dynstr)           }
 178   .gnu.version          ${RELOCATING-0} : { *(.gnu.version) }
 179   .gnu.version_d        ${RELOCATING-0} : { *(.gnu.version_d) }
 180   .gnu.version_r        ${RELOCATING-0} : { *(.gnu.version_r) }
 181
 182   .rel.text    ${RELOCATING-0} :
 183     {
 184       *(.rel.text)
 185       ${RELOCATING+*(.rel.text.*)}
 186       ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
 187     }
 188   .rela.text   ${RELOCATING-0} :
 189     {
 190       *(.rela.text)
 191       ${RELOCATING+*(.rela.text.*)}
 192       ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
 193     }
 194   .rel.data    ${RELOCATING-0} :
 195     {
 196       *(.rel.data)
 197       ${RELOCATING+*(.rel.data.*)}
 198       ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
 199     }
 200   .rela.data   ${RELOCATING-0} :
 201     {
 202       *(.rela.data)
 203       ${RELOCATING+*(.rela.data.*)}
 204       ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
 205     }
 206   .rel.rodata  ${RELOCATING-0} :
 207     {
 208       *(.rel.rodata)
 209       ${RELOCATING+*(.rel.rodata.*)}
 210       ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
 211     }
 212   .rela.rodata ${RELOCATING-0} :
 213     {
 214       *(.rela.rodata)
 215       ${RELOCATING+*(.rela.rodata.*)}
 216       ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
 217     }
 218   .rel.sdata   ${RELOCATING-0} :
 219     {
 220       *(.rel.sdata)
 221       ${RELOCATING+*(.rel.sdata.*)}
 222       ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
 223     }
 224   .rela.sdata   ${RELOCATING-0} :
 225     {
 226       *(.rela.sdata)
 227       ${RELOCATING+*(.rela.sdata.*)}
 228       ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
 229     }
 230   .rel.sbss    ${RELOCATING-0} :
 231     {
 232       *(.rel.sbss)
 233       ${RELOCATING+*(.rel.sbss.*)}
 234       ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
 235     }
 236   .rela.sbss   ${RELOCATING-0} :
 237     {
 238       *(.rela.sbss)
 239       ${RELOCATING+*(.rela.sbss.*)}
 240       ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
 241     }
 242   .rel.bss     ${RELOCATING-0} :
 243     {
 244       *(.rel.bss)
 245       ${RELOCATING+*(.rel.bss.*)}
 246       ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
 247     }
 248   .rela.bss    ${RELOCATING-0} :
 249     {
 250       *(.rela.bss)
 251       ${RELOCATING+*(.rela.bss.*)}
 252       ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
 253     }
 254   .rel.stext            ${RELOCATING-0} : { *(.rel.stest) }
 255   .rela.stext           ${RELOCATING-0} : { *(.rela.stest) }
 256   .rel.etext            ${RELOCATING-0} : { *(.rel.etest) }
 257   .rela.etext           ${RELOCATING-0} : { *(.rela.etest) }
 258   .rel.sdata            ${RELOCATING-0} : { *(.rel.sdata) }
 259   .rela.sdata           ${RELOCATING-0} : { *(.rela.sdata) }
 260   .rel.edata            ${RELOCATING-0} : { *(.rel.edata) }
 261   .rela.edata           ${RELOCATING-0} : { *(.rela.edata) }
 262   .rel.eit_v            ${RELOCATING-0} : { *(.rel.eit_v) }
 263   .rela.eit_v           ${RELOCATING-0} : { *(.rela.eit_v) }
 264   .rel.ebss             ${RELOCATING-0} : { *(.rel.ebss) }
 265   .rela.ebss            ${RELOCATING-0} : { *(.rela.ebss) }
 266   .rel.srodata          ${RELOCATING-0} : { *(.rel.srodata) }
 267   .rela.srodata         ${RELOCATING-0} : { *(.rela.srodata) }
 268   .rel.erodata          ${RELOCATING-0} : { *(.rel.erodata) }
 269   .rela.erodata         ${RELOCATING-0} : { *(.rela.erodata) }
 270   .rel.got              ${RELOCATING-0} : { *(.rel.got) }
 271   .rela.got             ${RELOCATING-0} : { *(.rela.got) }
 272   .rel.ctors            ${RELOCATING-0} : { *(.rel.ctors) }
 273   .rela.ctors           ${RELOCATING-0} : { *(.rela.ctors) }
 274   .rel.dtors            ${RELOCATING-0} : { *(.rel.dtors) }
 275   .rela.dtors           ${RELOCATING-0} : { *(.rela.dtors) }
 276   .rel.init             ${RELOCATING-0} : { *(.rel.init) }
 277   .rela.init            ${RELOCATING-0} : { *(.rela.init) }
 278   .rel.fini             ${RELOCATING-0} : { *(.rel.fini) }
 279   .rela.fini            ${RELOCATING-0} : { *(.rela.fini) }
 280   .rel.plt              ${RELOCATING-0} : { *(.rel.plt) }
 281   .rela.plt             ${RELOCATING-0} : { *(.rela.plt) }
 282
 283   /* Concatenate .page0 sections.  Put them in the page0 memory bank
 284      unless we are creating a relocatable file.  */
 285   .page0 :
 286   {
 287     *(.page0)
 288   } ${RELOCATING+ > page0}
 289
 290   /* Start of text section.  */
 291   .stext ${RELOCATING-0} :
 292   {
 293     *(.stext)
 294   } ${RELOCATING+ > ${TEXT_MEMORY}}
 295
 296   .init ${RELOCATING-0} :
 297   {
 298     *(.init)
 299   } ${RELOCATING+=${NOP-0}}
 300
 301   ${RELOCATING-${INSTALL_RELOC}}
 302   ${RELOCATING-${FINISH_RELOC}}
 303
 304   .text ${RELOCATING-0}:
 305   {
 306     /* Put startup code at beginning so that _start keeps same address.  */
 307     ${RELOCATING+${STARTUP_CODE}}
 308
 309     ${RELOCATING+*(.init)}
 310     *(.text)
 311     ${RELOCATING+*(.text.*)}
 312     /* .gnu.warning sections are handled specially by elf32.em.  */
 313     *(.gnu.warning)
 314     ${RELOCATING+*(.gnu.linkonce.t.*)}
 315     ${RELOCATING+*(.tramp)}
 316     ${RELOCATING+*(.tramp.*)}
 317
 318     ${RELOCATING+${FINISH_CODE}}
 319
 320     ${RELOCATING+_etext = .;}
 321     ${RELOCATING+PROVIDE (etext = .);}
 322     ${RELOCATING+. = ALIGN(2);}
 323   } ${RELOCATING+ > ${TEXT_MEMORY} =0xa7a7a7a7}
 324
 325   .eh_frame ${RELOCATING-0} :
 326   {
 327     KEEP (*(.eh_frame))
 328   } ${RELOCATING+ > ${TEXT_MEMORY}}
 329
 330   .gcc_except_table ${RELOCATING-0} :
 331   {
 332     *(.gcc_except_table)
 333   } ${RELOCATING+ > ${TEXT_MEMORY}}
 334
 335   .rodata  ${RELOCATING-0} :
 336   {
 337     *(.rodata)
 338     ${RELOCATING+*(.rodata.*)}
 339     ${RELOCATING+*(.gnu.linkonce.r*)}
 340     ${RELOCATING+. = ALIGN(2);}
 341   } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
 342
 343   .rodata1 ${RELOCATING-0} :
 344   {
 345     *(.rodata1)
 346     ${RELOCATING+. = ALIGN(2);}
 347   } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
 348
 349   /* Constructor and destructor tables are in ROM.  */
 350   ${RELOCATING+${CTOR}}
 351   ${RELOCATING+${DTOR}}
 352
 353   .jcr ${RELOCATING-0} :
 354   {
 355     KEEP (*(.jcr))
 356   } ${RELOCATING+ > ${TEXT_MEMORY}}
 357
 358   /* Start of the data section image in ROM.  */
 359   ${RELOCATING+__data_image = .;}
 360   ${RELOCATING+PROVIDE (__data_image = .);}
 361
 362   /* All read-only sections that normally go in PROM must be above.
 363      We construct the DATA image section in PROM at end of all these
 364      read-only sections.  The data image must be copied at init time.
 365      Refer to GNU ld, Section 3.6.8.2 Output Section LMA.  */
 366   .data  ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
 367   {
 368     ${RELOCATING+__data_section_start = .;}
 369     ${RELOCATING+PROVIDE (__data_section_start = .);}
 370
 371     ${RELOCATING+${DATA_START_SYMBOLS}}
 372     ${RELOCATING+*(.sdata)}
 373     *(.data)
 374     ${RELOCATING+*(.data.*)}
 375     ${RELOCATING+*(.data1)}
 376     ${RELOCATING+*(.gnu.linkonce.d.*)}
 377     ${CONSTRUCTING+CONSTRUCTORS}
 378
 379     ${RELOCATING+_edata  =  .;}
 380     ${RELOCATING+PROVIDE (edata = .);}
 381     ${RELOCATING+. = ALIGN(2);}
 382   } ${RELOCATING+ > ${DATA_MEMORY} =0xffffffff}
 383
 384   ${RELOCATING+__data_section_size = SIZEOF(.data);}
 385   ${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
 386   ${RELOCATING+__data_image_end = __data_image + __data_section_size;}
 387
 388   ${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
 389
 390   /* .install ${RELOCATING-0}:
 391   {
 392     . = _data_image_end;
 393   } ${RELOCATING+ > ${TEXT_MEMORY}} */
 394
 395   /* Relocation for some bss and data sections.  */
 396   ${RELOCATING-${BSS_DATA_RELOC}}
 397   ${RELOCATING-${SOFT_REGS_RELOC}}
 398
 399   .bss ${RELOCATING-0} :
 400   {
 401     ${RELOCATING+__bss_start = .;}
 402     ${RELOCATING+*(.softregs)}
 403     ${RELOCATING+*(.sbss)}
 404     ${RELOCATING+*(.scommon)}
 405
 406     *(.dynbss)
 407     *(.bss)
 408     ${RELOCATING+*(.bss.*)}
 409     ${RELOCATING+*(.gnu.linkonce.b.*)}
 410     *(COMMON)
 411     ${RELOCATING+PROVIDE (_end = .);}
 412   } ${RELOCATING+ > ${DATA_MEMORY}}
 413   ${RELOCATING+__bss_size = SIZEOF(.bss);}
 414   ${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
 415
 416   .eeprom ${RELOCATING-0} :
 417   {
 418     *(.eeprom)
 419     *(.eeprom.*)
 420   } ${RELOCATING+ > ${EEPROM_MEMORY}}
 421
 422   ${RELOCATING+${VECTORS}}
 423
 424   /* Stabs debugging sections.  */
 425   .stab          0 : { *(.stab) }
 426   .stabstr       0 : { *(.stabstr) }
 427   .stab.excl     0 : { *(.stab.excl) }
 428   .stab.exclstr  0 : { *(.stab.exclstr) }
 429   .stab.index    0 : { *(.stab.index) }
 430   .stab.indexstr 0 : { *(.stab.indexstr) }
 431
 432   .comment       0 : { *(.comment) }
 433
 434 EOF
 435
 436 source $srcdir/scripttempl/DWARF.sc
 437
 438 cat <<EOF
 439 }
 440 EOF