1 1999-10-04 Doug Evans <devans@casey.cygnus.com>
3 * fr30-asm.c,fr30-desc.h: Rebuild.
4 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
5 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
7 1999-09-29 Nick Clifton <nickc@cygnus.com>
9 * sh-opc.h: Fix bit patterns for several load and store
12 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
14 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
15 cleaner code using completer prefixes. Add 'Y'.
17 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
19 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
21 * hppa-dis.c (extract_22): New function.
23 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
25 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
27 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
29 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
31 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
33 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
35 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
37 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
39 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
41 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
43 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
45 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
48 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
50 * hppa-dis.c: (print_insn_hppa): Add missing break after
53 * hppa-dis.c: Finish constifying various completers, register
56 1999-09-14 Michael Meissner <meissner@cygnus.com>
58 * configure.in (Canonicalization of target names): Remove adding
59 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
60 generates $ac_config_sub with a ${CONFIG_SHELL} already.
61 * configure: Regenerate.
63 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
65 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
67 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
69 1999-09-07 Nick Clifton <nickc@cygnus.com>
71 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
72 names for the mulu and muls patterns.
74 1999-09-04 Steve Chamberlain <sac@pobox.com>
78 * disassemble.c (disassembler): Handle bfd_arch_pj.
79 * configure.in: Handle bfd_pj_arch.
80 * Makefile.am: Rebuild dependencies.
81 (CFILES): Add pj-dis.c and pj-opc.c.
82 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
83 * configure, Makefile.in: Rebuild.
85 1999-09-04 H.J. Lu <hjl@gnu.org>
87 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
89 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
91 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
93 1999-08-04 Doug Evans <devans@casey.cygnus.com>
95 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
96 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
97 * m32r-opinst.c: Rebuild.
99 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
101 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
102 register args by 'f'.
104 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
106 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
107 extract_10U_store): New.
108 (print_insn_hppa): Add new completers.
110 * hppa-dis.c (signed_unsigned_names,mix_half_names,
111 saturation_names): New.
112 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
114 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
116 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
118 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
119 to decide to print a space.
121 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
123 * i386-dis.c: Add AMD athlon instruction support.
125 1999-08-10 Ian Lance Taylor <ian@zembu.com>
127 From Wally Iimura <iimura@microunity.com>:
128 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
129 overflow at end of address space.
130 (generic_print_address): Use sprintf_vma.
132 1999-08-08 Ian Lance Taylor <ian@zembu.com>
134 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
135 MKDEP. Rebuild dependencies.
136 * Makefile.in: Rebuild.
138 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
140 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
141 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
142 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
143 (print_insn_hppa): Add 64 bit condition completers.
145 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
147 * hppa-dis.c (print_insn_hppa): Change condition args to use
150 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
152 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
155 1999-07-21 Ian Lance Taylor <ian@zembu.com>
158 * configure.bat: Remove; obsolete.
160 1999-07-11 Ian Lance Taylor <ian@zembu.com>
162 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
163 (generic_strcat_address): Add cast to avoid warning.
164 * i386-dis.c: Initialize all structure fields to avoid warnings.
165 Add ATTRIBUTE_UNUSED as appropriate.
167 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
169 * sparc-dis.c (print_insn_sparc): Differentiate between
170 addition and oring when guessing symbol for comment.
172 1999-07-05 Nick Clifton <nickc@cygnus.com>
174 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
177 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
179 * i386-dis.c: Mention intel mode specials in macro char comment.
181 1999-06-21 Ian Lance Taylor <ian@zembu.com>
183 * alpha-dis.c: Don't include <stdlib.h>.
184 * arm-dis.c: Include "sysdep.h".
185 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
187 * Makefile.am: Rebuild dependencies.
188 * Makefile.in: Rebuild.
190 1999-06-16 Nick Clifton <nickc@cygnus.com>
192 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
195 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
197 * arm-dis.c (arm_regnames): Turn into a pointer to a register
199 (arm_regnames_standard): New variable: Array of ARM register
200 names according to ARM instruction set nomenclature.
201 (arm_regnames_apcs): New variable: Array of ARM register names
202 according to ARM Procedure Call Standard.
203 (arm_regnames_raw): New variable: Array of ARM register names
204 using just 'r' and the register number.
205 (arm_toggle_regnames): New function: Toggle the chosen register set
207 (parse_disassembler_options): New function: Parse any target
208 disassembler command line options.
209 (print_insn_big_arm): Call parse_disassembler_options if any
211 (print_insn_little_arm): Call parse_disassembler_options if any
214 1999-06-13 Ian Lance Taylor <ian@zembu.com>
216 * i386-dis.c (FWAIT_OPCODE): Define.
217 (used_prefixes): New static variable.
218 (fetch_data): Don't print an error message if we have already
219 fetched some bytes successfully.
220 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
221 (prefix_name): New static function.
222 (print_insn_i386): If setjmp fails, indicating a data error, but
223 we have managed to fetch some bytes, print the first one as a
224 prefix or a .byte pseudo-op. If fwait is followed by a non
225 floating point instruction, print the first prefix. Set
226 used_prefixes when prefixes are used. If any prefixes were not
227 used after disassembling the instruction, print the first prefix
228 instead of printing the instruction.
229 (putop): Set used_prefixes when prefixes are used.
230 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
231 (OP_DIR, OP_SIMD_Suffix): Likewise.
233 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
235 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
236 Support signx %reg, clruw %reg.
238 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
240 * sparc-opc.c: Add aliases Solaris as supports.
242 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
244 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
245 * Makefile.in: Regenerated.
247 1999-06-03 Philip Blundell <philb@gnu.org>
249 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
250 when target is PC-relative.
252 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
254 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
257 * m68k-dis.c (fetch_arg): Add places `n', `o'.
259 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
260 Add mcf5206e to appropriate instructions.
261 Add alias for MAC, MSAC.
263 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
266 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
267 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
269 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
271 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
273 * i386-dis.c (Ed): Define.
274 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
276 (OP_rm): Rename to OP_Rd.
279 (putop): Add const to template and p.
280 (print_insn_x86): Delete.
281 (print_insn_i386): Merge old function print_insn_x86. Add const
283 (struct dis386): Add const to name.
284 (dis386_att, dis386_intel): Add const.
285 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
286 (names32, names16, names8, names_seg, index16): Add const.
287 (grps, prefix_user_table, float_reg): Add const.
288 (float_mem_att, float_mem_intel): Add const.
289 (oappend): Add const to s.
290 (OP_REG): Add const to s.
291 (ptr_reg): Add const to s.
292 (dofloat): Add const to dp.
293 (OP_C): Don't skip modrm, it's now done in OP_Rd.
296 (OP_Rd): Check for valid mod. Call Op_E to print.
297 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
298 (OP_MS): Check for valid mod. Call Op_EM to print.
299 (OP_3DNowSuffix): Set obufp and use oappend rather than
300 strcat. Call BadOp() for errors.
301 (OP_SIMD_Suffix): Likewise.
302 (BadOp): New function.
304 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
306 * i386-dis.c (dis386_intel): Remove macro chars, except for
307 jEcxz. Change cWtR and cRtd to cW and cR.
308 (dis386_twobyte_intel): Remove macro chars here too.
309 (putop): Handle R and W macros for intel mode.
311 * i386-dis.c (SIMD_Fixup): New function.
312 (dis386_twobyte_att): Use it on movlps and movhps, and change
313 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
314 (dis386_twobyte_intel): Same here.
316 * i386-dis.c (Av): Remove.
320 (OP_SIMD_Suffix): New function.
321 (OP_DIR): Remove dead code.
322 (eAX_reg..eDI_reg): Renumber.
323 (onebyte_has_modrm): Table numbering comments.
324 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
325 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
326 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
327 and handle SIMD cmp insns in OP_SIMD_Suffix.
328 (info->bytes_per_line): Bump from 5 to 6.
330 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
331 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
333 PIII SIMD support from Doug Ledford <dledford@redhat.com>
334 * i386-dis.c (XM, EX, None): Define.
335 (OP_XMM, OP_EX, OP_None): New functions.
336 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
337 (GRP14): Rename to GRPAMD.
338 (GRP*): Add USE_GROUPS flag.
340 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
341 (twobyte_has_modrm): Add SIMD entries.
342 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
343 (grps): Add SIMD insns.
344 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
345 oappend repz if uses_f3_prefix. Add code to handle new groups for
348 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
349 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
350 operand from Av to Jv.
352 1999-05-07 Nick Clifton <nickc@cygnus.com>
354 * mcore-dis.c (print_insn_mcore): Use .short to display
355 unidentified instructions, not .word.
357 1999-04-26 Tom Tromey <tromey@cygnus.com>
359 * aclocal.m4, configure: Updated for new version of libtool.
361 1999-04-14 Doug Evans <devans@casey.cygnus.com>
363 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
364 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
366 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
368 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
371 1999-04-10 Doug Evans <devans@casey.cygnus.com>
373 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
374 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
376 1999-04-06 Ian Lance Taylor <ian@zembu.com>
378 * opintl.h (LC_MESSAGES): Never define.
380 1999-04-04 Ian Lance Taylor <ian@zembu.com>
382 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
383 (separator_char, scale_char): Likewise.
384 (print_insn_x86): Likewise.
385 (print_insn_i386): Likewise. Add declaration.
387 1999-03-26 Doug Evans <devans@casey.cygnus.com>
389 * fr30-dis.c: Rebuild.
390 * m32r-dis.c: Rebuild.
392 1999-03-23 Ian Lance Taylor <ian@zembu.com>
394 * m68k-opc.c: Change compare instructions to use "@s" rather than
395 ";s" when used with an immediate operand.
397 1999-03-22 Doug Evans <devans@casey.cygnus.com>
399 * cgen-opc.c (cgen_set_cpu): Delete.
400 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
401 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
403 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
405 * po/opcodes.pot: Rebuild.
407 1999-03-16 Martin Hunt <hunt@cygnus.com>
409 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
411 1999-03-11 Doug Evans <devans@casey.cygnus.com>
413 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
414 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
415 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
416 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
417 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
418 * m32r-opinst.c: Rebuild.
420 1999-02-25 Doug Evans <devans@casey.cygnus.com>
422 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
423 (cgen_hw_lookup_by_num): Rewrite.
424 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
425 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
426 * m32r-opinst.c: Rebuild.
428 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
430 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
431 (insert_jhint): Fix insertion mask.
432 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
434 1999-02-10 Doug Evans <devans@casey.cygnus.com>
436 * Makefile.in: Rebuild.
438 1999-02-09 Doug Evans <devans@casey.cygnus.com>
440 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
441 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
442 * Makefile.am: Remove references to them.
443 (HFILES): Add fr30-desc.h,m32r-desc.h.
444 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
446 (ALL_MACHINES): Update.
447 * configure.in: Redo handling of cgen_files.
448 (bfd_i960_arch): Delete i960c-*.lo files.
449 * configure: Regenerate.
450 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
451 (hash_insn_array): Rewrite.
452 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
453 (hash_insn_array): Rewrite.
454 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
455 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
456 (cgen_lookup_get_insn_operands): Ditto.
457 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
458 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
459 * po/POTFILES.in: Rebuild.
460 * po/opcodes.pot: Rebuild.
462 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
464 * Makefile.am: Rebuild dependencies.
465 (HFILES): Add fr30-opc.h.
466 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
467 * Makefile.in: Rebuild.
469 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
470 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
472 * acconfig.h: Remove.
473 * configure: Rebuild with current autoconf/automake.
474 * aclocal.m4: Likewise.
475 * config.in: Likewise.
476 * Makefile.in: Likewise.
478 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
480 * m68k-opc.c: Correct move (not movew) to status word on 5200.
482 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
484 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
485 * i386-dis.c (x_mode): Define.
489 (dis386_twobyte): Remove.
490 (dis386_twobyte_att): New.
491 (dis386_twobyte_intel): New.
492 (print_insn_x86): Use new arrays.
494 (float_mem_intel): New.
495 (float_mem_att): New.
496 (dofloat): Use new float_mem arrays.
497 (print_insn_i386_att): New.
498 (print_insn_i386_intel): New.
499 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
500 (putop): Handle intel syntax.
501 (OP_indirE): Handle intel syntax.
502 (OP_E): Handle intel syntax.
503 (OP_I): Handle intel syntax.
504 (OP_sI): Handle intel syntax.
505 (OP_OFF): Handle intel syntax.
509 1999-01-27 Doug Evans <devans@casey.cygnus.com>
511 * fr30-opc.h,fr30-opc.c: Rebuild.
512 * i960c-opc.h,i960c-opc.c: Rebuild.
513 * m32r-opc.c: Rebuild.
515 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
517 * hppa-dis.c: revert HP merge changes until HP gives us
520 1999-01-19 Nick Clifton <nickc@cygnus.com>
522 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
523 offsets as well as symbloic address.
525 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
527 * hppa-dis.c: fix comments and some indentation.
529 1999-01-12 Doug Evans <devans@casey.cygnus.com>
531 * fr30-opc.c,i960c-opc.c: Regenerate.
533 1999-01-11 Doug Evans <devans@casey.cygnus.com>
535 * fr30-opc.c: Regenerate.
537 1999-01-06 Doug Evans <devans@casey.cygnus.com>
539 * m32r-dis.c: Regenerate.
541 1999-01-05 Doug Evans <devans@casey.cygnus.com>
543 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
544 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
545 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
547 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
549 * configure.in: Require autoconf 2.12.1 or higher.
551 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
553 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
555 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
557 * fr30-opc.c: Regenerated.
559 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
561 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
563 1998-12-15 Dave Brolley <brolley@cygnus.com>
565 * fr30-opc.c,fr30-opc.h: Regenerated.
567 1998-12-14 Dave Brolley <brolley@cygnus.com>
569 * fr30-opc.c,fr30-opc.h: Regenerated.
571 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
573 * fr30-opc.c,fr30-opc.h: Regenerated.
575 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
577 * m32r-opc.c: Regenerate.
579 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
581 * dis-buf.c (generic_strcat_address): reformat to GNU coding
582 conventions. change sprintf call to an sprintf_vma call.
584 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
586 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
588 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
590 The following changes were made by
591 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
592 David Taylor <taylor@texas.cygnus.com>, and
593 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
594 merge in changes by HP; HP did not create ChangeLog entries.
596 * dis-buf.c (generic_strcat_address): new function.
598 * hppa-dis.c: Changes to improve hppa disassembly.
599 Changed formatting in : reg_names, fp_reg_names,control_reg,
600 New variables : sign_extension_names, deposit_names, conversion_names
601 float_test_names, compare_cond_names_double, add_cond_names_double,
602 logical_cond_names_double, unit_cond_names_double,
603 branch_push_pop_names, saturation_names, shift_names, mix_names,
604 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
605 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
606 (fput_const): renamed as fput_hex_const
608 - use the macros fputs_filtered and
609 fput_decimal_const whenever possible; calls to sign_extend require
610 2 params -- add a missing second param of 0.
611 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
612 architecture version number of current machine. HP folks are
613 trying to handle situation where the target program was compiled
614 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
616 - added new cases : 'g', 'B', 'm'
617 - added cases specifically for PA 2.0
618 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
619 - calls to fput_const become calls to fput_hex_const
621 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
623 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
624 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
625 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
626 * Makefile.in: Rebuilt.
627 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
629 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
630 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
632 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
634 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
636 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
638 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
640 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
641 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
643 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
645 * fr30-opc.c: Regenerate.
647 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
649 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
651 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
653 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
655 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
657 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
659 1998-11-30 Doug Evans <devans@casey.cygnus.com>
661 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
662 CGEN_INSN_BASE_VALUE.
663 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
664 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
666 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
668 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
670 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
672 * fr30-asm.c,fr30-dis.c: Regenerated.
674 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
676 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
678 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
680 * fr30-opc.c: Regenerated.
682 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
684 * fr30-opc.c: Regenerated.
685 * fr30-opc.h: Regenerated.
686 * fr30-dis.c: Regenerated.
687 * fr30-asm.c: Regenerated.
689 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
691 * mips-opc.c (sync.p,sync.l): Swap insn values.
693 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
695 * fr30-opc.c: Regenerate.
697 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
699 * fr30-opc.c: Regenerated.
700 * fr30-opc.h: Regenerated.
702 1998-11-18 Doug Evans <devans@casey.cygnus.com>
704 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
705 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
707 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
709 * fr30-opc.c: Regenerated.
711 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
713 * fr30-opc.c: Regenerated.
714 * fr30-opc.h: Regenerated.
715 * fr30-dis.c: Regenerated.
716 * fr30-asm.c: Regenerated.
718 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
720 * po/opcodes.pot: Regenerated.
721 * fr30-opc.c: Regenerated.
722 * fr30-opc.h: Regenerated.
723 * fr30-dis.c: Regenerated.
724 * fr30-asm.c: Regenerated.
726 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
728 * disassemble.c (disassembler): Add support for FR30 target.
730 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
732 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
733 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
735 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
737 * po/opcodes.pot: Regenerate.
738 * po/POTFILES.in: Regenerate.
739 * fr30-opc.c: Regenerate.
740 * fr30-opc.h: Regenerate.
742 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
744 * m32r-asm.c: Regenerate.
746 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
748 * configure.in: Added case for bfd_fr30_arch.
749 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
750 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
751 (CLEANFILES): Added stamp-fr30.
753 * fr30-asm.c: New file.
754 * fr30-dis.c: New file.
755 * fr30-opc.c: New file.
756 * fr30-opc.h: New file.
757 * po/POTFILES.in: Regenerated
758 * po/opcodes.pot: Regenerated
760 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
762 * configure.in: detect cygwin* instead of cygwin32*
763 * configure: regenerate
765 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
767 * mips-opc.c (IS_M): Added.
769 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
771 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
773 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
775 * m32r-opc.h,m32r-opc.c: Regenerate.
777 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
779 * i386-dis.c (OP_3DNowSuffix): New static function.
782 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
783 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
784 (insn_codep): New static variable.
785 (print_insn_x86): Init insn_codep after prefixes.
786 (grps): Add GRP14 entries for prefetch, prefetchw.
789 From Jeff B Epler <jepler@usgs.gov>
790 * i386-dis.c (Suffix3DNow): New table.
792 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
794 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
796 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
798 * d10v-dis.c (print_operand): If num is nonzero, then
799 add OPERAND_ACC1, not OPERAND_ACC0.
801 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
803 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
806 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
808 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
811 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
813 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
815 1998-09-09 Michael Meissner <meissner@cygnus.com>
817 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
820 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
822 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
824 (print_insn_little_arm): Detect Thumb symbols in elf object
827 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
829 * alpha-dis.c (print_insn_alpha): Use the machine type to
830 decide which PALcode set to include.
832 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
834 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
836 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
838 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
839 MSUB and MSUBS instructions.
841 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
843 * ppc-opc.c (powerpc_operands): Omit parens around additions in
846 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
848 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
849 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
850 +, -, and d for ColdFire.
852 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
853 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
854 (extract_mbe): Likewise.
856 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
858 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
860 * m10300-opc.c: First cut at UDF instructions.
862 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
864 * m32r-opc.c: Regenerate (remove semantic descriptions).
866 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
868 * arm-dis.c (print_insn_big_arm): Fix indentation.
869 (print_insn_little_arm): Likewise.
871 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
873 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
875 (print_insn_little_arm): Likewise.
877 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
879 Move all global state data into opcode table struct, and treat
880 opcode table as something that is "opened/closed".
881 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
882 (cgen_asm_init): Delete.
883 (cgen_set_parse_operand_fn): New function.
884 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
885 (cgen_dis_init): Delete.
886 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
887 (cgen_current_{opcode_table_mach,endian}): Delete.
888 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
890 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
892 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
895 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
897 * m10300-opc.c: Add entries for "no_match_operands" field in
900 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
902 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
904 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
906 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
908 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
910 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
912 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
914 (OP_J): Remove unnecessary subtraction when 16-bit displacement
915 will be masked later.
917 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
919 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
921 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
923 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
925 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
927 * m10300-dis.c: Only recognize instructions from the currently
929 * m10300-opc.c: Add field indicating the particular variant of
930 the mn10300 each instruction is available on.
932 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
934 * configure.in: For bfd_vax_arch, build vax-dis.lo.
935 * Makefile.am: Rebuild dependencies.
936 (CFILES): Add vax-dis.c.
937 (ALL_MACHINES): Add vax-dis.lo.
938 * aclocal.m4: Rebuild with current libtool.
939 * configure, Makefile.in: Rebuild.
941 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
943 * vax-dis.c: New file, from work by Pauline Middelink
944 <middelin@polyware.iaf.nl>.
945 * disassemble.c (ARCH_vax): Define if ARCH_all.
946 (disassembler): Add case for ARCH_vax.
947 * makefile.vms: Support compilation on vms/vax.
949 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
951 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
952 related to sign extension and the size of ints.
954 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
956 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
957 instructions. Support (sp) addressing mode by expanding it into
960 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
962 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
964 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
966 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
968 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
970 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
973 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
975 * mips-dis.c (print_insn_little_mips): Previously, instruction
976 printing references the symbol table to determine whether the
977 instruction resides in a block regular instructions or mips16
978 instructions. However, when the disassembler gets used in other
979 environments where the symbol table is not present, we no longer
980 rely in the symbol table, rather, use the low bit of the
981 instructions address to guess. There should be no change for usage
982 of the disassembler in host based programs, gdb, objdump.
983 (print_insn_big_mips): ditto.
984 (print_insn_mips): ditto
986 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
988 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
990 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
992 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
994 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
996 * i386-dis.c (index16): Add '%' to register names. Use ','
999 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1001 * i386-dis.c: Don't print opcode suffix when we can figure out the
1002 size (and gas can!) by register operands, or from the default
1004 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1006 (dis386, dis386_twobyte, grps): Use new suffix macros.
1007 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1008 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1009 order of cmps operands to agree with Intel docs. Correct operand
1010 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1011 agree with Intel docs.
1012 (print_insn_x86): Print orphan fwait before other prefixes.
1013 Return correct byte count for orphan fwait with prefixes. Don't
1014 print `bound' operands in reverse order.
1015 (ckprefix): Stop accumulating prefixes if we get fwait.
1016 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1018 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1020 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1021 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1023 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1025 Fix problems when bfd_vma is wider than long.
1026 * i386-dis.c: Make op_address and start_pc unsigned.
1027 (set_op): Make parameter unsigned.
1028 (print_insn_x86): Cast to bfd_vma when passing a value to
1030 * ns32k-dis.c (CORE_ADDR): Don't define.
1031 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1032 bfd_scan_vma to read back address.
1033 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1035 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1036 (NEXTULONG): New definition.
1037 (print_insn_m68k): Avoid overflow when computing third argument of
1039 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1040 Use disp instead of val to store offset values.
1041 (print_indexed): Use base_disp instead of word to store base
1042 displacement, to avoid overflow.
1043 * m10300-dis.c (disassemble): Cast value to long when computing
1044 pc-relative address, to get correct sign extension.
1046 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1048 * m32r-opc.c: Regenerate.
1050 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1052 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1053 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1055 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1057 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1059 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1061 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1063 (OP_DSreg): Rename from OP_DSSI.
1064 (OP_ESreg): Rename from OP_ESDI.
1065 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1067 (append_seg): Rename from append_prefix.
1068 (ptr_reg): New function.
1069 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1071 (PREFIX_ADDR): Rename from PREFIX_ADR.
1072 (float_reg): Add non-broken opcodes for people who don't want
1075 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1077 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1080 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1082 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1084 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1086 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1087 0; produce error message for shifts of size 32 (or 64 for 64-bit
1088 shifts), because the hardware doesn't support them.
1090 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1092 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1093 LONG_2, LONG_2b formats to use this new operand.
1095 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1097 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1099 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1101 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1102 endian data support.
1104 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1106 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1107 and SHORT_B3b formats to use Rb instead of Ra.
1109 Add FLAG_MUL16 to MUL2XH opcode.
1111 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1112 to existing 1.1.1 parallelisation prohibition procedure.
1114 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1116 * m32r-asm.c,m32r-dis.c: Regenerate.
1118 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1120 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1121 with a shift count of 0.
1123 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1125 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1126 (cgen_hw_lookup_by_num): New function.
1128 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1130 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1132 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1134 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1135 as big-endian on SPARClite.
1137 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1139 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1141 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1143 * po/Make-in (install-info): New target.
1145 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1147 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1148 * configure: Rebuild.
1150 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1152 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1153 variety of ISA2 instructions to set bottom ten bits of trap code.
1155 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1157 * Makefile.am (config.status): Add explicit target so that
1158 config.status depends upon bfd/configure.in.
1159 * Makefile.in: Rebuild.
1161 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1163 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1164 instructions to set bottom ten bits of break code.
1165 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1166 for above optional argument.
1168 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1170 * makefile.vms: Run dec c with /nodebug.
1172 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1174 * Makefile.in: Rebuilt.
1175 * Makefile.am: Regenerated dependencies with mkdep.
1177 * opintl.h (_): Define as dgettext.
1179 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1181 * cgen-asm.c: Internationalised.
1182 * m32r-asm.c: Internationalised.
1183 * m32r-dis.c: Internationalised.
1184 * m32r-opc.c: Internationalised.
1186 * aclocal.m4: Regenerated.
1187 * configure: Regenerated.
1188 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1189 * Makefile.in: Rebuild.
1190 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1191 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1193 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1195 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1197 * aclocal.m4, configure: Rebuild with current tools.
1199 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1201 * opintl.h: New file - contains internationalisation macros used
1202 by source files in this directory.
1203 * po/: New subdirectory - contains internationalisation files.
1204 * po/Make-in: New file - Makefile constructor.
1205 * po/POTFILES.in: New file - list of files in opcodes directory
1206 that should be scan for internationalisation macros.
1207 * po/opcodes.pot: New file - list of internationisation strings
1208 found in files mentioned in po/POTFILES.in.
1209 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1210 entry. Add intl directory to include paths.
1211 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1212 HAVE_STRCPY, HAVE_LC_MESSAGES
1213 * configure.in: Add rule to build Makefile in po subdirectory.
1214 * Makefile.in: Rebuilt.
1215 * aclocal.m4: Rebuilt.
1216 * config.in: Rebuilt.
1217 * configure: Rebuilt.
1218 * alpha-opc.c: Internationalised.
1219 * arc-dis.c: Internationalised.
1220 * arc-opc.c: Internationalised.
1221 * arm-dis.c: Internationalised.
1222 * cgen-asm.c: Internationalised.
1223 * d30v-dis.c: Internationalised.
1224 * dis-buf.c: Internationalised.
1225 * h8300-dis.c: Internationalised.
1226 * h8500-dis.c: Internationalised.
1227 * i386-dis.c: Internationalised.
1228 * m10200-dis.c: Internationalised.
1229 * m10300-dis.c: Internationalised.
1230 * m68k-dis.c: Internationalised.
1231 * m88k-dis.c: Internationalised.
1232 * mips-dis.c: Internationalised.
1233 * ns32k-dis.c: Internationalised.
1234 * opintl.h: Internationalised.
1235 * ppc-opc.c: Internationalised.
1236 * sparc-dis.c: Internationalised.
1237 * v850-dis.c: Internationalised.
1238 * v850-opc.c: Internationalised.
1240 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1242 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1243 (asm_hash_table_entries): New variable.
1244 (cgen_asm_init): Free asm_hash_table_entries.
1245 (hash_insn_array,hash_insn_list): New functions.
1246 (build_asm_hash_table): Use them. Hash macro insns as well.
1247 (cgen_asm_lookup_insn): Update.
1248 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1249 (dis_hash_table_entries): New variable.
1250 (cgen_dis_init): Free dis_hash_table_entries.
1251 (hash_insn_array,hash_insn_list): New functions.
1252 (build_dis_hash_table): Use them. Hash macro insns as well.
1253 (cgen_dis_lookup_insn): Update.
1254 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1255 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1256 (cgen_macro_insn_count): New function.
1257 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1259 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1261 * i386-dis.c (OP_DSSI): Print segment override.
1263 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1265 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1268 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1270 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1271 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1272 * configure.in: Define and substitute WIN32LDFLAGS and
1274 * aclocal.m4: Rebuild with new libtool.
1275 * configure, Makefile.in: Rebuild.
1277 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1279 * m32r-opc.c: Regenerate.
1281 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1283 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1284 before trying to copy it.
1285 * Makefile.in: Rebuild.
1287 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1289 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1291 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1293 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1294 from an arbitrary valid buffer instead of fetching them on demand
1296 (invalid_float): use bit_extract_simple() instead of bit_extract().
1298 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1300 From H.J. Lu <hjl@gnu.org>:
1301 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1304 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1306 * Branched binutils 2.9.
1308 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1310 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1311 disassembling last 4 bytes of a section.
1313 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1315 Fix some gcc -Wall warnings:
1316 * arc-dis.c (print_insn): Add casts to avoid warnings.
1317 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1318 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1319 * m10200-dis.c (disassemble): Likewise.
1320 * m10300-dis.c (disassemble): Likewise.
1321 * ns32k-dis.c (print_insn_ns32k): Likewise.
1322 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1323 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1324 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1325 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1326 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1327 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1328 * tic80-dis.c (print_one_instruction): Likewise.
1329 * w65-dis.c (print_operand): Likewise.
1330 * z8k-dis.c (fetch_data): Likewise.
1331 * a29k-dis.c: Add return type for find_byte_func_type.
1332 * arc-opc.c: Include <stdio.h>. Remove declarations of
1333 insert_multshift and extract_multshift.
1334 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1336 (extract_value): Fully parenthesize expression.
1337 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1338 * h8500-opc.h (h8500_table): Fully bracket initializer.
1339 * w65-opc.h (optable): Likewise.
1340 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1341 * i386-dis.c (OP_E): Initialize local variables.
1342 * m10200-dis.c (print_insn_mn10200): Likewise.
1343 * mips-dis.c (print_insn_mips16): Likewise.
1344 * sh-dis.c (print_insn_shx): Likewise.
1345 * v850-dis.c (print_insn_v850): Likewise.
1346 * ns32k-dis.c (print_insn_arg): Declare.
1347 (get_displacement, invalid_float): Declare.
1348 (list_search, sign_extend, flip_bytes): Declare return type.
1349 (get_displacement): Likewise.
1350 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1352 (print_insn_ns32k): Make i unsigned.
1353 (invalid_float): Make static. Declare type of val.
1354 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1355 on each for iteration.
1356 * tic30-dis.c (get_indirect_operand): Likewise.
1357 * z8k-dis.c (print_insn_z8001): Declare return type.
1358 (print_insn_z8002): Likewise.
1359 (unparse_instr): Fix sprintf format strings.
1361 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1363 * mips-opc.c: Add "sync.l" and "sync.p".
1365 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1367 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1368 default m68k variant to recognize.
1370 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1371 (ctrl, cobr, mem, ea): Likewise.
1372 (print_addr): Likewise. Remove cast.
1373 (ea): Cast argument of print_addr to bfd_vma.
1375 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1377 (cgen_parse_unsigned_integer): Likewise.
1378 (cgen_parse_address): Likewise.
1380 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1382 * i960-dis.c (ctrl): Add full braces to structure initialization.
1383 (cobr, mem, reg): Likewise.
1384 (ea): Correct parenthesization in expression.
1386 * cgen-asm.c: Include <ctype.h>.
1387 (build_asm_hash_table): Remove unused local variable i.
1388 (cgen_parse_keyword): Add casts to avoid warnings.
1390 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1391 symbol. Fix indentation.
1392 (print_insn_little_arm): Likewise.
1394 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1396 * configure.in: Use AM_DISABLE_SHARED.
1397 * aclocal.m4, configure: Rebuild with libtool 1.2.
1399 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1401 These patches are courtesy of Jonathan Walton and Tony Thompson
1402 (athompso@cambridge.arm.com).
1404 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1407 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1408 both the offset and the label closest to the destination.
1410 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1412 * m32r-opc.h: Regenerate.
1414 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1416 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1418 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1420 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1421 assume that info->symbols is non-empty.
1423 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1425 * alpha-opc.c (cvtqs) There is no such thing.
1426 (cvttq): Missing most of the /*d variants.
1428 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1430 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1431 delayed branches or jumps.
1433 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1435 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1437 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1438 * tic30-dis.c (print_branch): Likewise.
1440 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1442 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1443 saved_symbol code as it is no longer needed.
1445 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1447 * cgen-asm.c: Include symcat.h.
1448 * cgen-dis.c,cgen-opc.c: Ditto.
1449 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1451 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1453 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1455 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1457 * m32r-opc.[ch]: Regenerate.
1459 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1461 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1462 arguments. Don't perform validation here.
1463 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1465 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1467 * m32r-opc.c: Regenerate.
1469 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1471 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1472 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1474 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1476 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1478 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1480 * configure.in: Get the version number from BFD.
1481 * configure: Rebuild.
1483 From H.J. Lu <hjl@gnu.org>:
1484 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1485 * Makefile.in: Rebuild.
1487 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1489 * m32r-opc.c: Regenerate.
1490 * m32r-opc.h: Regenerate.
1492 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1494 * m32r-opc.c: Regenerate.
1496 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1498 Fix rac to accept only a0:
1499 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1500 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1501 Introduce OPERAND_GPR.
1502 * d10v-dis.c (print_operand): Likewise.
1504 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1506 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1507 (cgen_hw_lookup): Make result const.
1508 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1510 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1512 * configure, aclocal.m4: Rebuild with new libtool.
1514 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1516 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1517 instructions use a PC relative branch, not absolute.
1519 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1521 * configure.in: Set libtool_enable_shared rather than
1522 libtool_shared. Remove diversion hack.
1523 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1525 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1527 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1528 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1530 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1532 * tic30-dis.c: New file.
1533 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1534 * configure.in: Handle bfd_tic30_arch.
1535 * Makefile.am: Rebuild dependencies.
1536 (CFILES): Add tic30-dis.c
1537 (ALL_MACHINES): Add tic30-dis.lo.
1538 * configure, Makefile.in: Rebuild.
1540 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1542 * m32r-opc.h (HAVE_CPU_M32R): Define.
1544 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1546 * v850-opc.c (insertion routines): If both alignment and size is
1547 wrong then report this.
1549 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1551 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1552 Only recognize instructions for the current target_processor.
1554 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1556 * d10v-dis.c (PC_MASK): Correct value.
1557 (print_operand): If there's a reloc, don't calculate the
1558 address because they could be in different sections.
1560 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1562 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1563 instruction after the 4650's "mul" instruction; nobody's using the
1564 4010 these days. If object files someday indicate which processor
1565 variant they're intended for, we can do a better job at this.
1567 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1569 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1570 table provided entry size. Use CGEN_INSN_MNEMONIC.
1571 (cgen_parse_keyword): Rewrite.
1572 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1573 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1574 * cgen-opc.c: Clean up pass over `struct foo' usage.
1575 (cgen_keyword_lookup_value): Handle "" entry.
1576 (cgen_keyword_add): Likewise.
1578 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1580 * mips-opc.c: Add FP_D to s.d instruction flags.
1582 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1584 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1586 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1588 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1589 PC relative offset forms before the 15 bit forms. An assembler command
1590 line option now chooses the default.
1592 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1594 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1595 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1597 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1599 * configure: Only build libopcodes shared if --enable-shared's value
1600 was `yes', or was set to `*opcodes*'.
1601 * aclocal.m4: Likewise.
1602 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1603 original source of this bit of code. It's not clear what the best fix
1606 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1608 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1609 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1610 offset forms before the 15 bit forms, to default to the long forms.
1612 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1614 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1616 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1618 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1619 symbol if none is present.
1620 (print_insn_big_arm): Prevent examination of stored symbol if
1623 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1625 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1627 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1629 * disassemble.c: Remove disasm_symaddr() function.
1631 * arm-dis.c: Use info->symbol instead of info->flags to determine
1632 if disassmbly should be in Thumb or Arm mode.
1634 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1636 * arm-dis.c: Add support for disassembling Thumb opcodes.
1637 (print_insn_thumb): New function.
1639 * disassemble.c (disasm_symaddr): New function.
1641 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1642 (thumb_opcodes): Table of Thumb opcodes.
1644 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1646 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1648 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1649 and 'v' as operand types.
1651 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1653 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1654 <olivier.carmona@di.epfl.ch>.
1655 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1656 which has a two word opcode with a one word argument.
1658 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1660 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1661 unsigned, not signed.
1662 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1664 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1666 * d10v-dis.c (print_operand):
1667 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1669 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1671 * d10v-opc.c (OPERAND_FLAG): Split into:
1672 (OPERAND_FFLAG, OPERAND_CFLAG) .
1676 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1678 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1679 field for all INSN_MACRO's.
1680 * mips16-opc.c: same
1682 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1684 * mips-opc.c (sync,cache): These are 3900 insns.
1686 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1688 sh-opc.h (sh_table): Remove ftst/nan.
1690 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1692 * mips-opc.c (ffc, ffs): Fix mask.
1694 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1696 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1699 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1701 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1702 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1704 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1706 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1707 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1709 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1711 * v850-dis.c (disassemble): Replace // with /* ... */
1713 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1715 * sparc-opc.c: Add wr & rd for v9a asr's.
1716 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1717 (v9a_asr_reg_names): New variable.
1718 Patch from David Miller <davem@vger.rutgers.edu>.
1720 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1722 * sparc-opc.c (v9notv9a): New insn type.
1723 (IMPDEP): Move to the end to not conflict with edge8 et al.
1724 Patch from David Miller <davem@vger.rutgers.edu>.
1726 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1728 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1730 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1732 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1734 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1736 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1737 of disassemble_info structure to determine if an overlay address
1738 has a matching symbol in low memory.
1740 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1741 new symbol_at_address_func field in disassemble_info structure.
1743 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1745 * v850-opc.c (extract_d22): Use signed arithmatic.
1747 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1749 * mips-opc.c: Three op mult is not an ISA insn.
1751 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1753 * mips-opc.c: Fix formatting.
1755 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1757 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1758 than assuming that char is signed. Explicitly sign extend 16 bit
1759 values, rather than assuming that short is 16 bits.
1760 (OP_sI, OP_J, OP_DIR): Likewise.
1762 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1764 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1767 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1769 * v850-opc.c: Fix typo in comment.
1771 * v850-dis.c (disassemble): Add test of processor type when
1772 determining opcodes.
1774 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1776 * configure.in: Use a diversion to set enable_shared before the
1777 arguments are parsed.
1778 * configure: Rebuild.
1780 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1782 * m68k-opc.c (TBL1): Use ! rather than `.
1783 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1785 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1787 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1789 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1791 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1794 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1795 * aclocal.m4: Rebuild with new libtool.
1796 * configure: Rebuild.
1798 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1800 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1802 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1804 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1806 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1808 * v850-opc.c (v850_opcodes): Further rearrangements.
1810 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1812 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1814 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1816 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1819 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1821 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1823 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1825 * v850-opc.c: Initialise processors field of v850_opcode structure.
1827 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1829 Merge changes from Martin Hunt:
1831 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1833 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1834 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1835 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1837 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1839 * d30v-dis.c (print_insn): First operand of d*i (delayed
1840 branch) instructions is relative.
1842 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1843 (d30v_operand_table): Add IMM6S3 type.
1844 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1846 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1847 and cmp instructions.
1849 * d30v-opc.c: Correct entries for repeat*, and sat*.
1850 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1851 types. Correct several formats.
1853 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1855 * d30v-opc.c (pre_defined_registers): Change control registers.
1857 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1858 SHORT_C2. Manual was incorrect.
1860 * d30v-dis.c (lookup_opcode): Return value now indicates
1861 if an opcode has a short and a long form. Used for deciding
1862 to append a ".s" or ".l".
1863 (print_insn): Append a ".s" to an instruction if it is
1864 the short form and ".l" if it is a long form. Do not append
1865 anything if the instruction has only one possible size.
1867 * d30v-opc.c: Change mulx2h to require an even register.
1868 New form: SHORT_A2; a SHORT_A form that needs an even
1869 register as the first operand.
1871 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1872 instruction was not being disassembled if there were an odd
1873 number of instructions.
1875 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1877 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1879 * v850-dis.c (disassemble): Improved display of register lists.
1881 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1883 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1884 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1885 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1886 fandnot1s, fandnot2s.
1888 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1890 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1892 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1894 * cgen-asm.c (cgen_parse_address): New argument resultp.
1895 All callers updated.
1896 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1898 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1900 * mn10200-dis.c (disassemble): PC relative instructions are
1901 relative to the next instruction, not the current instruction.
1903 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1905 * v850-dis.c (disassemble): Only signed extend values that are not
1906 returned by extract functions.
1907 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1909 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1911 * v850-opc.c: Update comments. Remove use of
1912 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1914 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1916 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1918 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1920 * configure: Rebuilt with latest devo autoconf for NT support.
1922 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1924 * v850-dis.c (disassemble): Use curly brace syntax for register
1927 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1928 where r0 is being used as a destination register.
1930 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1932 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1934 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1936 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1938 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1940 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1941 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1944 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1946 * configure (cgen_files): Add support for v850e target.
1947 * configure.in (cgen_files): Add support for v850e target.
1949 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1951 * configure (cgen_files): Add support for v850ea target.
1952 * configure.in (cgen_files): Add support for v850ea target.
1954 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1956 * configure.in (bfd_arc_arch): Add.
1957 * configure: Rebuild.
1958 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1959 * Makefile.in: Rebuild.
1960 * arc-dis.c, arc-opc.c: New files.
1961 * disassemble.c (ARCH_all): Define ARCH_arc.
1962 (disassembler): Add ARC support.
1964 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1966 * v850-dis.c (disassemble): Add support for v850EA instructions.
1968 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1969 (v850_opcodes): Add v850EA instructions.
1971 * v850-dis.c (disassemble): Add support for v850E instructions.
1973 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1974 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1975 insert_spe, extract_spe): New Functions.
1976 (v850_opcodes): Add v850E instructions.
1978 * v850-opc.c: Reorganised and re-layed out to improve readability
1981 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1983 * configure: Rebuild with autoconf 2.12.1.
1985 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1987 * aclocal.m4, configure: Rebuild with new automake patches.
1989 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1991 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1992 * acinclude.m4: Just include acinclude.m4 from BFD.
1993 * aclocal.m4, configure: Rebuild.
1995 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1997 * Makefile.am: New file, based on old Makefile.in.
1998 * acconfig.h: New file.
1999 * acinclude.m4: New file.
2000 * stamp-h.in: New file.
2001 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2002 Removed shared library handling; now handled by libtool. Replace
2003 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2004 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2005 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2006 handling in AC_OUTPUT.
2007 * dep-in.sed: Change .o to .lo.
2008 * Makefile.in: Now built with automake.
2009 * aclocal.m4: Now built with aclocal.
2010 * config.in, configure: Rebuild.
2012 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2014 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2016 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2018 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2020 * sparc-dis.c (sorted_opcodes): New static local.
2021 (struct opcode_hash): `opcode' is pointer to const element.
2022 (build_hash): First arg is now table of sorted pointers.
2023 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2024 (compare_opcodes): Update.
2026 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2028 * cgen-opc.c: #include <ctype.h>.
2029 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2030 Handle case insensitive hashing.
2031 (hash_keyword_value): Change type of `value' to unsigned int.
2033 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2035 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2036 precision FP, mark it as such. Likewise for double precision
2037 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2040 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2042 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2044 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2045 nesting depth when all the macros are expanded.
2047 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2049 * sparc-opc.c: The fcmp v9a instructions take an integer register
2050 as a destination, not a floating point register. From Christian
2051 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2053 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2055 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2056 syntax. From Roman Hodek
2057 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2059 * i386-dis.c (twobyte_has_modrm): Fix pand.
2061 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2063 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2065 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2067 * arm-dis.c: Add prototypes for arm_decode_shift and
2070 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2072 * mips-opc.c: Add r3900 insns.
2074 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2076 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2077 print delay slot instructions on the same line. When using a PC
2078 relative load, add a comment with the value being loaded if it can
2081 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2083 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2084 to pushS/popS for segment regs and byte constant so that
2085 pushw/popw printed when in 16 bit data mode.
2087 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2088 print cbtw, cwtd in 16 bit data mode.
2089 * i386-dis.c (putop): extra case W to support above.
2091 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2092 address size prefix in 16 bit address mode.
2094 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2096 * sh-dis.c: Reindent. Rename local variable fprintf to
2099 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2101 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2103 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2105 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2107 * mips16-opc.c (mip16_opcodes): same.
2109 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2111 * m68k-opc.c (moveb): Change $d to %d.
2113 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2115 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2116 (twobyte_has_modrm): Likewise.
2118 (OP_MMX, OP_EM, OP_MS): New static functions.
2120 * i386-dis.c: Revert patch of April 4. The output now matches
2123 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2125 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2128 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2130 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2132 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2134 * Makefile.in (install): Depend upon installdirs.
2135 (installdirs): New target.
2137 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2139 From Thomas Graichen <graichen@rzpd.de>:
2140 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2141 * configure: Rebuild.
2143 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2145 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2146 Delete string{,s}.h support.
2148 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2150 * cgen-asm.c (cgen_parse_operand_fn): New global.
2151 (cgen_parse_{{,un}signed_integer,address}): Update call to
2152 cgen_parse_operand_fn.
2153 (cgen_init_parse_operand): New function.
2154 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2155 from cgen_asm_init_parse.
2156 (m32r_cgen_assemble_insn): New operand `errmsg'.
2157 Delete call to as_bad, return error message to caller.
2158 (m32r_cgen_asm_hash_keywords): #if 0 out.
2160 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2162 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2164 [case 'J']: Fix typo in register name.
2166 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2168 * configure.in: Substitute SHLIB_LIBS.
2169 * configure: Rebuild.
2170 * Makefile.in (SHLIB_LIBS): New variable.
2171 ($(SHLIB)): Use $(SHLIB_LIBS).
2173 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2175 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2177 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2179 * disassemble.c (disassembler): Handle m32r.
2181 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2183 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2184 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2185 * Makefile.in (CFILES): Add them.
2186 (ALL_MACHINES): Add them.
2187 (dependencies): Regenerate.
2188 * configure.in (cgen_files): New variable.
2189 (bfd_m32r_arch): Add entry.
2190 * configure: Regenerate.
2192 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2194 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2195 * configure: Rebuild.
2197 * Makefile.in: Rebuild dependencies.
2199 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2201 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2204 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2206 * Branched binutils 2.8.
2208 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2210 * m10200-dis.c: Rename from mn10200-dis.c.
2211 * m10200-opc.c: Rename from mn10200-opc.c.
2212 * m10300-dis.c: Rename from mn10300-dis.c
2213 * m10300-opc.c: Rename from mn10300-opc.c.
2214 * Makefile.in: Update accordingly.
2216 * mips16-opc.c: Add mul and dmul macros.
2218 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2220 * makefile.vms: Update CFLAGS, add clean target.
2222 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2224 * mips-opc.c: Add "wait". From Ralf Baechle
2225 <ralf@gnu.ai.mit.edu>.
2227 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2228 * configure, config.in: Rebuild.
2229 * sysdep.h: Include <stdlib.h> if it exists.
2230 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2232 * Makefile.in: Rebuild dependencies.
2234 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2236 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2237 Andrew Bray <andy@madhouse.demon.co.uk>.
2239 * mips-opc.c: Add cast when setting mips_opcodes.
2241 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2243 * v850-dis.c (disassemble): Fix sign extension problem.
2244 * v850-opc.c (extract_d*): Fix sign extension problems to make
2245 disassembly calculate branch offsets correctly.
2247 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2249 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2251 * mips-opc.c: Add dctr and dctw.
2253 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2255 * d30v-dis.c (print_insn): Change the way signed constants
2258 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2260 * Makefile.in (BFD_H): New variable.
2261 (HFILES): New variable.
2262 (CFILES): Add all C files.
2263 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2264 Delete old dependencies, and build new ones.
2265 * dep-in.sed: New file.
2267 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2269 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2271 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2273 * mn10200-opc.c: Change "trap" to "syscall".
2274 * mn10300-opc.c: Add new "syscall" instruction.
2276 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2278 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2279 mulul insns on the coldfire.
2281 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2283 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2284 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2285 (print_insn_little_arm): Likewise.
2287 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2289 Based on patches from H.J. Lu <hjl@lucon.org>:
2290 * i386-dis.c (fetch_data): Add prototype.
2291 * m68k-dis.c (fetch_data): Add prototype.
2292 (dummy_print_address): Add prototype. Make static.
2293 * ppc-opc.c (valid_bo): Add prototype.
2294 * sparc-dis.c (build_hash_table): Add prototype.
2295 (is_delayed_branch, compute_arch_mask): Add prototypes.
2296 (print_insn_sparc): Make several local variables const.
2297 (compare_opcodes): Change arguments to const PTR. Add prototype.
2298 * sparc-opc.c (arg): Change name field to be const.
2299 (lookup_name, lookup_value): Add prototypes. Change table and
2300 name parameters to be const.
2301 (sparc_encode_asi): Change name parameter to be const.
2302 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2303 (sparc_encode_sparclet_cpreg): Likewise.
2304 (sparc_decode_asi): Change return type to be const.
2305 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2306 (sparc_decode_sparclet_cpreg): Likewise.
2308 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2310 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2311 Solaris doesn't like the combined options, and the -f is
2313 (stamp-tshlink, install): Likewise.
2315 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2317 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2320 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2322 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2324 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2326 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2329 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2331 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2333 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2335 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2337 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2339 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2341 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2343 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2344 floatformat_to_double to make portable.
2345 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2348 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2350 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2351 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2353 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2355 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2356 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2358 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2360 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2361 (OFF_SL_BR_SCALED): ... to this, and added the flag
2362 TIC80_OPERAND_BASEREL to the flags word.
2363 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2366 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2368 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2369 Change mips_opcodes from const array to a pointer,
2370 and change bfd_mips_num_opcodes from const int to int,
2371 so that we can increase the size of the mips opcodes table
2374 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2376 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2377 store BITNUM values in the table in one's complement form
2378 to match behavior when assembler is given a raw numeric
2379 value for a BITNUM operand.
2380 * tic80-dis.c (print_operand_bitnum): Ditto.
2382 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2384 * d30v-opc.c: Removed references to FLAG_X.
2386 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2388 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2390 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2392 * Makefile.in: Added d30v object files.
2393 * configure: (bfd_d30v_arch) Rebuilt.
2394 * configure.in: (bfd_d30v_arch) Added new case.
2395 * d30v-dis.c: New file.
2396 * d30v-opc.c: New file.
2397 * disassemble.c (disassembler) Add entry for d30v.
2399 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2401 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2402 representations for the floating point BITNUM values.
2404 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2406 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2407 in the table in one's complement form, as they appear in the
2409 (tic80_symbol_to_value): Use macros to access predefined
2411 (tic80_value_to_symbol): Ditto.
2412 (tic80_next_predefined_symbol): New function.
2413 * tic80-dis.c (print_operand_bitnum): Remove code that did
2414 one's complement for BITNUM values.
2416 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2418 * makefile.vms: Remove 8 bit characters. Update to latest
2421 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2423 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2425 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2427 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2428 (IMM24_PCREL): Likewise.
2430 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2432 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2433 address for an extended PC relative instruction that is not a
2436 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2438 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2441 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2443 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2444 (tic80_opcodes): Sort entries so that long immediate forms
2445 come after short immediate forms, making it easier for
2446 assembler to select the right one for a given operand.
2448 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2450 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2452 (print_insn_mips16): Likewise.
2454 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2456 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2457 a symbol class that restricts translation to just that
2458 class (general register, condition code, etc).
2460 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2462 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2463 and REG_DEST_E for register operands that have to be
2464 an even numbered register. Add REG_FPA for operands that
2465 are one of the floating point accumulator registers.
2466 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2467 (tic80_opcodes): Change entries that need even numbered
2468 register operands to use the new operand table entries.
2469 Add "or" entries that are identical to "or.tt" entries.
2471 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2473 * mips16-opc.c: Add new cases of exit instruction for
2475 * mips-dis.c (print_mips16_insn_arg): Display floating point
2476 registers in operands of exit instruction. Print `$' before
2477 register names in operands of entry and exit instructions.
2479 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2481 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2482 pairs for all predefined symbols recognized by the assembler.
2483 Also used by the disassembling routines.
2484 (tic80_symbol_to_value): New function.
2485 (tic80_value_to_symbol): New function.
2486 * tic80-dis.c (print_operand_control_register,
2487 print_operand_condition_code, print_operand_bitnum):
2488 Remove private tables and use tic80_value_to_symbol function.
2490 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2492 * d10v-dis.c (print_operand): Change address printing
2493 to correctly handle PC wrapping. Fixes PR11490.
2495 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2497 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2500 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2502 * mips-dis.c (print_insn_mips16): Set insn_info information.
2503 (print_mips16_insn_arg): Likewise.
2505 * mips-dis.c (print_insn_mips16): Better handling of an extend
2506 opcode followed by an instruction which can not be extended.
2508 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2510 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2511 coldfire moveb instruction to not allow an address register as
2512 destination. Although the documentation does not indicate that
2513 this is invalid, experiments uncovered unexpected behavior.
2514 Added a comment explaining the situation. Thanks to Andreas
2515 Schwab for pointing this out to me.
2517 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2519 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2520 entries are presorted so that entries with the same mnemonic are
2521 adjacent to each other in the table. Sort the entries for each
2522 instruction so that this is true.
2524 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2526 * m68k-dis.c: Include <libiberty.h>.
2527 (print_insn_m68k): Sort the opcode table on the most significant
2528 nibble of the opcode.
2530 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2532 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2533 "vsub", "vst", "xnor", and "xor" instructions.
2534 (V_a1): Renamed from V_a, msb of accumulator reg number.
2535 (V_a0): Add macro, lsb of accumulator reg number.
2537 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2539 * tic80-dis.c (print_insn_tic80): Broke excessively long
2540 function up into several smaller ones and arranged for
2541 the instruction printing function to be callable recursively
2542 to print vector instructions that have both a load and a
2543 math instruction packed into a single opcode.
2544 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2545 to explain why it comes after the other vector opcodes.
2547 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2549 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2550 move insns to handle immediate operands.
2552 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2554 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2555 fix operand mask in the "moveml" entries for the coldfire.
2557 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2559 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2560 New macros for building vector instruction opcodes.
2561 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2562 FMT_LI, which were unused. The field is now a flags field.
2563 Remove some opcodes that are possible, but illegal, such
2564 as long immediate instructions with doubles for immediate
2565 values. Add "vadd" and "vld" instructions.
2567 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2569 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2570 the order more logical. Move the shift alias instructions ("rotl",
2571 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2572 interspersed with the regular sr.x and sl.x instructions. Add
2573 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2574 "sub", "subu", "swcr", and "trap".
2576 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2578 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2579 (OFF_SL_PC): Renamed from OFF_SL.
2580 (OFF_SS_BR): New operand type for base relative operand.
2581 (OFF_SL_BR): New operand type for base relative operand.
2582 (REG_BASE): New operand type for base register operand.
2583 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2584 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2585 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2587 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2588 10 char field, padded with spaces on rhs, rather than a string
2589 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2590 than old TIC80_OPERAND_RELATIVE. Add support for new
2591 TIC80_OPERAND_BASEREL flag bit.
2593 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2595 * tic80-dis.c (print_insn_tic80): Print floating point operands
2597 * tic80-opc.c (SPFI): Add single precision floating point
2598 immediate operand type.
2599 (ROTATE): Add rotate operand type for shifts.
2600 (ENDMASK): Add for shifts.
2601 (n): Macro for the 'n' bit.
2602 (i): Macro for the 'i' bit.
2603 (PD): Macro for the 'PD' field.
2604 (P2): Macro for the 'P2' field.
2605 (P1): Macro for the 'P1' field.
2606 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2609 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2611 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2612 adding in current address for pc-relative operands.
2614 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2616 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2617 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2618 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2619 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2620 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2621 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2622 (REG_SCALED, LSI_SCALED): New operand types.
2623 (E): New macro for 'E' bit at bit 27.
2624 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2625 opcodes, including the various size flavors (b,h,w,d) for
2626 the direct load and store instructions.
2628 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2630 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2632 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2633 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2634 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2635 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2636 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2637 masks with "MASK_* & ~M_*" to get the M bit reset.
2638 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2640 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2642 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2643 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2644 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2646 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2647 CC, SICR, and LICR table entries.
2648 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2649 "bcnd", and "brcr" opcodes.
2651 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2653 * ppc-opc.c (powerpc_operands): Make comment match the
2654 actual fields (no shift field).
2655 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2656 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2657 partial implementation, work in progress.
2658 * tic80-opc.c (tic80_operands): Begin construction operands table.
2659 (tic80_opcodes): Continue populating opcodes table and start
2660 filling in the operand indices.
2661 (tic80_num_opcodes): Add this.
2663 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2665 * m68k-opc.c: Add #B case for moveq.
2667 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2669 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2670 before they are used.
2672 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2674 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2675 for "breakpoint" instruction.
2677 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2679 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2680 (dep): Use ALL_CFLAGS rather than CFLAGS.
2682 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2684 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2687 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2689 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2690 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2692 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2694 * mips16-opc.c: Add "abs".
2696 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2698 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2699 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2700 (disassembler): Add bfd_arch_tic80 support to set disassemble
2701 to print_insn_tic80.
2702 * tic80-dis.c (print_insn_tic80): Add stub.
2704 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2706 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2707 * configure: Regenerate with autoconf.
2708 * tic80-dis.c: Add file.
2709 * tic80-opc.c: Add file.
2711 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2713 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2715 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2717 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2718 (mn10200_opcodes): Use it for some logicals and btst insns.
2719 Add "break" and "trap" instructions.
2721 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2723 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2725 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2727 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2728 relative load or add now depends upon whether the instruction is
2731 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2733 * mn10200-dis.c: Finish writing disassembler.
2734 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2735 Fix mask for "jmp (an)".
2737 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2738 handle endianness issues for mn10300.
2740 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2742 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2744 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2745 instruction. Fix opcode field for "movb (imm24),dn".
2747 * mn10200-opc.c (mn10200_operands): Fix insertion position
2750 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2752 * mn10200-opc.c: Create mn10200 opcode table.
2753 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2754 but moving along nicely.
2756 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2758 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2760 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2762 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2763 specifiers for fmovem* instructions.
2765 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2767 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2769 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2771 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2774 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2776 * mn10300-opc.c: Add some comments explaining the various
2779 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2781 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2783 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2786 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2787 operand specifiers in fmovm* instructions.
2789 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2791 * ppc-opc.c (insert_li): Give an error if the offset has the two
2792 least significant bits set.
2794 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2796 * mips-dis.c (print_insn_mips16): Separate the instruction from
2797 the arguments with a tab, not a space.
2799 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2801 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2804 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2807 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2809 * configure: Rebuild with autoconf 2.12.
2811 Add support for mips16 (16 bit MIPS implementation):
2812 * mips16-opc.c: New file.
2813 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2814 (mips16_reg_names): New static array.
2815 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2816 after seeing a 16 bit symbol.
2817 (print_insn_little_mips): Likewise.
2818 (print_insn_mips16): New static function.
2819 (print_mips16_insn_arg): New static function.
2820 * mips-opc.c: Add jalx instruction.
2821 * Makefile.in (mips16-opc.o): New target.
2822 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2823 * configure: Rebuild.
2825 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2827 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2828 operand specifiers in *save, *restore and movem* instructions.
2830 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2833 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2834 register operands for immediate arithmetic, not, neg, negx, and
2835 set according to condition instructions.
2837 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2838 specifier of the effective-address operand in immediate forms of
2839 arithmetic instructions. The specifier for the immediate operand
2840 notes how and where the constant will be stored.
2842 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2844 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2847 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2850 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2852 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2854 * mn10300-dis.c (disassemble): Handle register lists.
2856 * mn10300-opc.c: Fix handling of register list operand for
2857 "call", "ret", and "rets" instructions.
2859 * mn10300-dis.c (disassemble): Print PC-relative and memory
2860 addresses symbolically if possible.
2861 * mn10300-opc.c: Distinguish between absolute memory addresses,
2862 pc-relative offsets & random immediates.
2864 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2866 (disassemble): Handle SPLIT and EXTENDED operands.
2868 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2870 * mn10300-dis.c: Rough cut at printing some operands.
2872 * mn10300-dis.c: Start working on disassembler support.
2873 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2875 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2877 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2879 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2881 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2883 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2885 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2886 register argument is calls and jmp instructions.
2888 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2890 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2891 getx operand. Fix opcode for mulqu imm,dn.
2893 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2895 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2896 in MN10300_OPERAND_SPLIT operands for how many bits
2897 appear in the basic insn word. Add IMM32_HIGH24,
2898 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2899 (mn10300_opcodes): Use new operands as needed.
2901 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2902 for bset, bclr, btst instructions.
2903 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2905 * mn10300-opc.c (mn10300_operands): Remove many redundant
2906 operands. Update opcode table as appropriate.
2907 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2908 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2910 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2912 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2913 operands (for indexed load/stores). Fix bitpos for DI
2914 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2915 few instructions that insert immediates/displacements in the
2916 middle of the instruction. Add IMM8E for 8 bit immediate in
2917 the extended part of an instruction.
2918 (mn10300_operands): Use new opcodes as appropriate.
2920 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2922 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2923 sequential so the assembler never parallelizes it with
2926 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2928 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2929 a data/address register that appears in register field 0
2930 and register field 1.
2931 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2933 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2935 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2936 standard disassembly.
2938 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2939 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2940 Recategorize PALcode instructions.
2942 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2944 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2946 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2948 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2949 there are no operand types.
2951 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2953 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2955 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2957 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2959 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2961 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2963 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2964 and sst.w instructions.
2966 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2969 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2971 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2974 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2976 * ppc-opc.c (PPCPWR2): Define.
2977 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2980 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2982 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2983 field for movhu instruction.
2985 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2986 cast value to "long" not "signed long" to keep hpux10
2989 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2991 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2994 * mn10300-opc.c (FMT*): Remove definitions.
2996 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2997 for shift-by-register opcodes.
2999 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3000 into [AD][MN][01] for encoding the position of the register
3003 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3005 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3006 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3008 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3010 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3011 Fix various typos. Add "PAREN" operand.
3012 (MEM, MEM2): Define.
3013 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3014 operands. Fix several typos.
3016 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3019 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3021 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3022 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3024 (mn10300_opcodes): Break opcode format out into its own field.
3025 Update many operand fields to deal with signed vs unsigned
3026 issues. Fix one or two typos in the "mov" instruction
3027 opcode, mask and/or operand fields.
3029 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3031 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3032 m68851 wasn't reset.
3034 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3036 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3037 all opcodes. Very rough cut at operands for all opcodes.
3039 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3042 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3044 * mn10200-opc.c, mn10300-opc.c: New files.
3045 * mn10200-dis.c, mn10300-dis.c: New files.
3046 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3047 * disassemble.c: Break mn10x00 support into 10200 and 10300
3049 * configure.in: Likewise.
3050 * configure: Rebuilt.
3052 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3054 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3056 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3058 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3060 * disassemble (ARCH_mn10x00): Define.
3061 (disassembler): Handle bfd_arch_mn10x00.
3062 * configure.in: Recognize bfd_mn10x00_arch.
3063 * configure: Rebuilt.
3065 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3067 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3068 accordingly. Don't declare functions using op_rtn.
3070 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3072 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3073 params to be more standard.
3074 * (disassemble): Print absolute addresses and symbolic names for
3075 branch and jump targets.
3076 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3078 * (v850_opcodes): Add breakpoint insn.
3080 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3082 * m68k-opc.c: Move the fmovemx data register cases before the
3083 other cases, so that they get recognized before the data register
3084 does gets treated as a degenerate register list.
3086 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3088 * mips-opc.c: Add a case for "div" and "divu" with two registers
3089 and a destination of $0.
3091 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3093 * mips-dis.c (print_insn_arg): Add prototype.
3094 (_print_insn_mips): Ditto.
3096 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3098 * mips-dis.c (print_insn_arg): Print condition code registers as
3101 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3103 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3105 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3107 * v850-dis.c (disassemble): Make static. Provide prototype.
3109 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3111 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3114 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3116 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3117 ']' characters into the output stream.
3118 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3119 Add "memop" field to all opcodes (for the disassembler).
3120 Reorder opcodes so that "nop" comes before "mov" and "jr"
3121 comes before "jarl".
3123 * v850-dis.c (print_insn_v850): Fix typo in last change.
3125 * v850-dis.c (print_insn_v850): Properly handle disassembling
3126 a two byte insn at the end of a memory region when the memory
3127 region's size is only two byte aligned.
3129 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3131 * v850-dis.c (v850_reg_names): Define.
3132 (v850_sreg_names, v850_cc_names): Likewise.
3133 (disassemble): Very rough cut at printing operands (unformatted).
3135 * v850-opc.c (BOP_MASK): Fix.
3136 (v850_opcodes): Fix mask for jarl and jr.
3138 * v850-dis.c: New file. Skeleton for disassembler support.
3139 * Makefile.in Remove v850 references, they're not needed here.
3140 * configure.in: Add v850-dis.o when building v850 toolchains.
3141 * configure: Rebuilt.
3142 * disassemble.c (disassembler): Call v850 disassembler.
3144 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3145 (insert_d8_6, extract_d8_6): New functions.
3146 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3147 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3149 (IF4A, IF4B): Use "D7" instead of "D7S".
3150 (IF4C, IF4D): Use "D8_7" instead of "D8".
3151 (IF4E, IF4F): New. Use "D8_6".
3152 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3153 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3155 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3156 (v850_operands): Change D16 to D16_15, use special insert/extract
3157 routines. New new D16 that uses the generic insert/extract code.
3158 (IF7A, IF7B): Use D16_15.
3159 (IF7C, IF7D): New. Use D16.
3160 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3162 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3163 message. Issue an error if the branch offset is odd.
3165 * v850-opc.c: Add notes about needing special insert/extract
3166 for all the load/store insns, except "ld.b" and "st.b".
3168 * v850-opc.c (insert_d22, extract_d22): New functions.
3169 (v850_operands): Use insert_d22 and extract_d22 for
3171 (insert_d9): Fix range check.
3173 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3175 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3176 and set bits field to D9 and D22 operands.
3178 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3180 * v850-opc.c (v850_operands): Define SR2 operand.
3181 (v850_opcodes): "ldsr" uses R1,SR2.
3183 * v850-opc.c (v850_opcodes): Fix opcode specs for
3184 sld.w, sst.b, sst.h, sst.w, and nop.
3186 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3188 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3189 end of the opcode table.
3191 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3193 * d10v-opc.c (pre_defined_registers): Added register pairs,
3194 "r0-r1", "r2-r3", etc.
3196 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3198 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3199 Create I16U for an unsigned 16bit mmediate operand.
3200 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3202 * v850-opc.c (v850_operands): Define EP operand.
3203 (IF4A, IF4B, IF4C, IF4D): Use EP.
3205 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3206 with immediate operand, "movhi". Tweak "ldsr".
3208 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3209 correct. Get sld.[bhw] and sst.[bhw] closer.
3211 * v850-opc.c (v850_operands): "not" is a two byte insn
3213 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3215 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3217 * v850-opc.c (two): Get order of words correct.
3219 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3221 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3222 register source and destination operands.
3223 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3225 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3226 same thinko in "trap" opcode.
3228 * v850-opc.c (v850_opcodes): Add initializer for size field
3231 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3232 Add D8 for 8-bit unsigned field in short load/store insns.
3233 (IF4A, IF4D): These both need two registers.
3234 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3235 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3236 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3237 for "ldsr" and "stsr".
3238 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3241 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3242 short store word (sst.w).
3244 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3246 * v850-opc.c (v850_operands): Added insert and extract fields,
3247 pointers to functions that handle unusual operand encodings.
3249 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3251 * v850-opc.c (v850_opcodes): Enable "trap".
3253 * v850-opc.c (v850_opcodes): Fix order of displacement
3254 and register for "set1", "clr1", "not1", and "tst1".
3256 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3258 * v850-opc.c (v850_operands): Add "B3" support.
3259 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3262 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3264 * v850-opc.c: Close unterminated comment.
3266 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3268 * v850-opc.c (v850_operands): Add flags field.
3269 (v850_opcodes): add move opcodes.
3271 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3273 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3274 * configure: (bfd_v850v_arch) Add new case.
3275 * configure.in: (bfd_v850_arch) Add new case.
3276 * v850-opc.c: New file.
3278 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3280 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3282 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3284 * d10v-opc.c: Add additional information to the opcode
3285 table to help determinine which instructions can be done
3288 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3290 * mpw-make.sed: Update editing of include pathnames to be
3293 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3295 * arm-opc.h: Added "bx" instruction definition.
3297 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3299 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3301 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3303 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3305 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3307 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3309 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3311 * makefile.vms: Update for alpha-opc changes.
3313 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3315 * i386-dis.c (print_insn_i386): Actually return the correct value.
3316 (ONE, OP_ONE): #ifdef out; not used.
3318 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3320 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3321 Changed subi operand type to treat 0 as 16.
3323 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3325 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3328 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3330 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3331 memory transfer instructions. Add new format string entries %h and %s.
3332 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3335 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3337 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3338 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3340 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3342 * alpha-dis.c (print_insn_alpha_osf): Remove.
3343 (print_insn_alpha_vms): Remove.
3344 (print_insn_alpha): Make globally visible. Chose the register
3345 names based on info->flavour.
3346 * disassemble.c: Always return print_insn_alpha for the alpha.
3348 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3350 * d10v-dis.c (dis_long): Handle unknown opcodes.
3352 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3354 * d10v-opc.c: Changes to support signed and unsigned numbers.
3355 All instructions with the same name that have long and short forms
3356 now end in ".l" or ".s". Divs added.
3357 * d10v-dis.c: Changes to support signed and unsigned numbers.
3359 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3361 * d10v-dis.c: Change all functions to use info->print_address_func.
3363 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3365 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3366 move ccr/sr insns more strict so that the disassembler only
3367 selects them when the addressing mode is data register.
3369 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3370 * d10v-opc.c (pre_defined_registers): Declare.
3371 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3372 to pick a better name for the registers.
3374 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3376 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3377 operands for fexpand and fpmerge. From Christian Kuehnke
3378 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3380 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3382 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3383 print routine. Take new regnames and cpumask arguments.
3384 Kill the environment variable nonsense.
3385 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3386 (print_insn_alpha_vms): New function. Do VMS style regnames.
3387 * disassemble.c (disassembler): Test bfd flavour to pick
3388 between OSF and VMS routines. Default to OSF.
3390 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3392 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3393 * configure: Rebuild.
3394 * Makefile.in (install): Use @INSTALL_SHLIB@.
3396 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3398 * configure: (bfd_d10v_arch) Add new case.
3399 * configure.in: (bfd_d10v_arch) Add new case.
3400 * d10v-dis.c: New file.
3401 * d10v-opc.c: New file.
3402 * disassemble.c (disassembler) Add entry for d10v.
3404 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3406 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3407 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3409 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3411 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3412 distinguish between variants of the instruction set.
3413 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3414 distinguish between variants of the instruction set.
3416 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3418 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3419 the 8086 instruction set.
3420 * i386-dis.c: General cleanups. Make most things static. Add
3421 prototypes. Get rid of static variables aflags and dflags. Pass
3422 them as args (to almost everything).
3424 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3426 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3428 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3430 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3431 if the next arg is marked with SRC_IN_DST. Gross.
3433 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3434 we're looking for and find EXR.
3436 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3437 if we're looking for KBIT and we don't find it.
3439 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3442 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3443 3bit immediate operands.
3445 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3447 * Released binutils 2.7.
3449 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3450 <kkaempf@progis.ac-net.de>.
3452 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3454 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3456 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3458 * sparc-dis.c (print_insn_sparclite): New routine to print
3459 sparclite instructions.
3461 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3463 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3465 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3467 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3468 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3469 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3471 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3473 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3474 Use autoconf-set values.
3475 (docdir, oldincludedir): Removed.
3476 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3478 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3480 * alpha-opc.c: New file.
3481 * alpha-opc.h: Remove.
3482 * alpha-dis.c: Complete rewrite to use new opcode table.
3483 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3484 * configure: Rebuild with autoconf 2.10.
3485 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3486 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3488 (alpha-opc.o): New target.
3490 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3492 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3493 Set imm_added_to_rs1 even if the source and destination register
3496 * sparc-opc.c: Add some two operand forms of the wr instruction.
3498 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3500 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3503 * disassemble.c (disassembler): Handle H8/S.
3504 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3506 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3508 * sparc-opc.c: Add beq/teq as aliases for be/te.
3510 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3511 <sergei@msil.sps.mot.com>.
3513 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3515 * makefile.vms: New file.
3517 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3519 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3521 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3524 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3526 * i386-dis.c (OP_OFF): Call append_prefix.
3528 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3530 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3531 unsigned long to silence a warning from the Solaris PowerPC
3534 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3536 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3538 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3540 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3542 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3543 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3544 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3545 cpush, cpusha, cpull sparclet insns.
3547 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3549 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3551 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3553 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3554 Set F_FLOAT on other floating point instructions.
3556 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3558 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3560 (powerpc_opcodes): Add 860/821 specific SPRs.
3562 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3564 * configure.in: Permit --enable-shared to specify a list of
3565 directories. Set and substitute BFD_PICLIST.
3566 * configure: Rebuild.
3567 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3568 uses. Set to @BFD_PICLIST@.
3570 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3572 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3573 not "abs", which may be needed for the absolute in something
3574 like btst #0,@10:8. Print L_3 immediates separately from other
3575 immediates. Change ABSMOV reference to ABS8MEM.
3577 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3579 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3580 (current_arch_mask): New static global.
3581 (compute_arch_mask): New static function.
3582 (print_insn_sparc): Delete sparc_v9_p. New static local
3583 current_mach. Resort opcode table if current_mach changes.
3584 Generalize "insn not supported" test.
3585 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3586 Delete test for v9/!v9.
3587 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3589 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3590 (brfcx): Renamed to FBRX.
3591 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3592 coprocessor mnemonics are not supported on the sparclet).
3593 (condf): Renamed to CONDF.
3594 (SLCBCC2): Delete F_ALIAS flag.
3596 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3598 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3599 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3601 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3603 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3604 that the shared library version number is set correctly.
3606 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3608 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3609 Miles Bader <miles@gnu.ai.mit.edu>.
3610 * configure: Rebuild.
3612 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3614 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3617 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3619 * configure: Rebuild with autoconf 2.8.
3621 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3623 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3624 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3626 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3628 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3629 since they appear as targets in Makefile.in.
3630 * configure: Rebuild.
3632 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3634 * mpw-make.sed: Edit out shared library support bits.
3636 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3638 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3639 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3640 (sparc_opcodes): Add sparclet insns.
3641 (sparclet_cpreg_table): New static local.
3642 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3643 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3645 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3647 * i386-dis.c (index16): New static variable.
3648 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3650 (OP_indirE): Return result of OP_E.
3651 (OP_E): Check for 16 bit addressing mode, and disassemble
3652 correctly. Optimised 32 bit case a little. Don't print
3653 "(base,index,scale)" when sib specifies only an offset.
3655 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3657 * configure.in: Set and substitute SHLIB_DEP.
3658 * configure: Rebuild.
3659 * Makefile.in (SHLIB_DEP): New variable.
3660 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3661 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3662 COMMON_SHLIB, add them to piclist with appropriate modifications.
3663 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3664 here: just use piclist.
3666 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3668 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3669 (print_insn_sparc): Rewrite v9/not-v9 tests.
3670 (compare_opcodes): Likewise.
3671 * sparc-opc.c (MASK_<ARCH>): Define.
3672 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3673 (sparclet,v6notv9): Define.
3674 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3675 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3677 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3679 * configure.in: Call AC_PROG_CC before configure.host.
3680 * configure: Rebuild.
3682 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3684 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3686 * i386-dis.c (onebyte_has_modrm): New static array.
3687 (twobyte_has_modrm): New static array.
3688 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3690 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3692 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3695 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3697 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3700 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3702 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3703 m68010up, not just m68020up | cpu32.
3705 * Makefile.in (SONAME): New variable.
3706 ($(SHLINK)): Make a link to the transformed name, as well.
3707 (stamp-tshlink): New target.
3708 (install): Skip stamp-tshlink during install.
3710 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3712 * configure.in: Call AC_ARG_PROGRAM.
3713 * configure: Rebuild.
3714 * Makefile.in (program_transform_name): New variable.
3715 (install): Transform library name before installing it.
3717 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3719 * i960-dis.c (mem): Add HX dcinva instruction.
3721 Support for building as a shared library, based on patches from
3722 Alan Modra <alan@spri.levels.unisa.edu.au>:
3723 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3724 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3725 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3726 * configure: Rebuild.
3727 * Makefile.in (ALLLIBS): New variable.
3728 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3729 (COMMON_SHLIB, SHLINK): New variables.
3730 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3731 (STAGESTUFF): Remove variable.
3732 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3733 (stamp-piclist, piclist): New targets.
3734 ($(SHLIB), $(SHLINK)): New targets.
3735 ($(OFILES)): Depend upon stamp-picdir.
3736 (disassemble.o): Build twice if PICFLAG is set.
3737 (MOSTLYCLEAN): Add pic/*.o.
3738 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3739 (distclean): Remove pic and stamp-picdir.
3740 (install): Install shared libraries.
3741 (stamp-picdir): New target.
3743 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3745 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3746 Print unknown instruction as "unknown", rather than in hex.
3748 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3750 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3752 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3754 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3756 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3758 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3759 when necessary. From Ulrich Drepper
3760 <drepper@myware.rz.uni-karlsruhe.de>.
3762 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3764 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3765 sparc_num_opcodes. Update architecture enum values.
3766 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3767 (sparc_opcode_lookup_arch): New function.
3768 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3769 (sparc_opcodes): Add v9a shutdown insn.
3771 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3773 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3774 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3776 (print_insn_sparc64): Deleted.
3777 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3780 * sparc-opc.c (architecture_pname): Add v9a.
3782 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3784 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3785 incorrectly defined as 0x16 when it should be 0x15.
3786 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3787 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3788 excb (exception barrier) which is defined in the Alpha
3789 Architecture Handbook version 2.
3790 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3791 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3792 disassembled as or, for example.
3794 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3796 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3797 (_print_insn_mips): Change i from int to unsigned int.
3799 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3801 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3802 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3804 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3806 * i386-dis.c: Added Pentium Pro instructions.
3808 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3810 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3813 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3815 * sh-opc.h (sh_nibble_type): Added REG_B.
3816 (sh_arg_type): Added A_REG_B.
3817 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3819 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3821 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3823 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3825 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3827 * Makefile.in (distclean): Remove stamp-h. From Ronald
3828 F. Guilmette <rfg@monkeys.com>.
3830 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3832 From David Mosberger-Tang <davidm@azstarnet.com>:
3833 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3836 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3838 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3839 (sh_table): Added many SH3 opcodes.
3840 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3842 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3844 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3845 (subco,subco.): Mark this PPC, not PPCCOM.
3847 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3849 * configure: Rebuild with autoconf 2.7.
3851 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3853 * configure: Rebuild with autoconf 2.6.
3855 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3857 * configure.in: Sort list of architectures. Accept but do nothing
3858 for alliant, convex, pyramid, romp, and tahoe.
3860 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3862 * a29k-dis.c (print_special): Change num to unsigned int.
3864 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3866 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3869 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3871 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3872 * configure: Rebuilt.
3874 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3876 * configure.in: Add case for bfd_i860_arch.
3877 * configure: Rebuild.
3879 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3881 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3882 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3883 (NEXTDOUBLE): Likewise.
3884 (print_insn_m68k): Don't match fmoveml if there is more than one
3885 register in the list.
3886 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3888 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3890 * m68k-opc.c: Use #W rather than #w.
3891 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3893 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3895 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3896 and likewise for all the dbxx opcodes.
3898 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3900 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3902 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3904 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3905 the VR4100 specific instructions to the mips_opcodes structure.
3907 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3909 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3910 ugly Metrowerks bug in CW6, is fixed in CW7.
3912 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3914 * ppc-opc.c (whole file): Add flags for common/any support.
3916 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3918 * Makefile.in (BISON): Remove macro.
3919 (FLAGS_TO_PASS): Remove BISON.
3921 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3923 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3925 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3926 instructions that take no args by looking at the match mask.
3927 (print_insn_arg): Always print "%" before register names.
3928 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3929 [case '_']: Don't print "@#" before address.
3930 [case 'J']: Use "%s" as format string, not register name.
3931 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3933 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3935 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3938 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3940 From David Mosberger-Tang <davidm@azstarnet.com>
3942 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3943 (alpha_insn_set): added definitions for VAX floating point
3944 instructions (Unix compilers don't generate these, but handcoded
3945 assembly might still use them).
3947 * alpha-dis.c (print_insn_alpha): added support for disassembling
3948 the miscellaneous instructions in the Alpha instruction set.
3950 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3952 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3953 no longer create sysdep.h, sed ppc-opc.c to work around a
3954 serious Metrowerks C bug.
3955 * mpw-make.in: Remove.
3956 * mpw-make.sed: New file, used by mpw-configure to edit
3957 Makefile.in into an MPW makefile.
3959 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3961 * Makefile.in (maintainer-clean): New synonym for realclean.
3963 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3965 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3966 which use '0', '1', and '2' instead. Specify the proper size for
3967 a pmove immediate operand. Correct the pmovefd patterns to be
3968 moves to a register, not from a register.
3969 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3971 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3973 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3974 %psr, %wim, %tbr as F_NOTV9.
3976 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3978 * Makefile.in (Makefile): Just rebuild Makefile when running
3980 (config.h, stamp-h): New targets.
3981 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3982 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3983 rebuilding config.h.
3984 * configure: Rebuild.
3986 * mips-opc.c: Change unaligned loads and stores with "t,A"
3987 operands to use "t,A(b)".
3989 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3991 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3993 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3995 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3996 until 3 instead of until 2.
3998 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4000 * Makefile.in (ALL_CFLAGS): Define.
4001 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4002 (MOSTLYCLEAN): Add config.log.
4003 (distclean): Don't remove config.log.
4004 * configure.in: Substitute HDEFINES.
4005 * configure: Rebuild.
4007 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4009 * sh-opc.h (sh_arg_type): Add F_FR0.
4010 (sh_table, case fmac): Add F_FR0 as first argument.
4012 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4014 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4016 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4018 * sparc-dis.c: Remove all references to NO_V9.
4020 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4022 * aclocal.m4: Just include ../bfd/aclocal.m4.
4023 * configure: Rebuild.
4025 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4027 * sparc-dis.c (X_DISP19): Define.
4028 (print_insn, case 'G'): Use it.
4029 (print_insn, case 'L'): Sign extend displacement.
4031 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4033 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4034 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4035 host_makefile_frag or frags.
4036 * aclocal.m4: New file.
4037 * configure: Rebuild.
4038 * Makefile.in (INSTALL): Set to @INSTALL@.
4039 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4040 (INSTALL_DATA): Set to @INSTALL_DATA@.
4042 (AR_FLAGS): Set to rc rather than qc.
4043 (CC): Define as @CC@.
4044 (CFLAGS): Set to @CFLAGS@.
4045 (@host_makefile_frag@): Remove.
4046 (config.status): Remove dependency upon @frags@.
4048 * configure.in: ../bfd/config.bfd now just sets shell variables.
4049 Use them rather than looking through target Makefile fragments.
4050 * configure: Rebuild.
4052 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4054 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4056 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4058 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4059 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4062 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4063 (lookup_{name,value}): New functions.
4064 (prefetch_table): New static local.
4065 (sparc_{encode,decode}_prefetch): New functions.
4066 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4068 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4070 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4073 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4075 * sh-dis.c: Correct comment on first line of file.
4077 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4079 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4081 * sparc-opc.c (asi, membar): New static locals.
4082 (sparc_{encode,decode}_{asi,membar}): New functions.
4083 (sparc_opcodes, membar insn): Fix.
4084 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4085 Support decoding of membar masks.
4088 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4090 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4092 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4094 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4095 and likewise for the other branches. Add bhs as an alias for bcc,
4096 and likewise for the size variants. Add dbhs as an alias for
4099 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4101 * sh-opc.h (FP sts instructions): Update to match reality.
4103 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4105 * m68k-dis.c: (fpcr_names): Add % before all register names.
4106 (reg_names): Likewise.
4107 (print_insn_arg): Don't explicitly print % before register names.
4108 Add % before register names in static array names. In case 'r',
4109 print data registers as `@(Dn)', not `Dn@'. When printing a
4110 memory address, don't print @# before it.
4111 (print_indexed): Change base_disp and outer_disp from int to
4112 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4113 syntax. Sign extend 8 byte displacement correctly.
4114 (print_base): Print using MIT syntax. Print zpc when appropriate.
4115 Change parameter disp from int to bfd_vma.
4117 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4120 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4122 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4123 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4124 * sh-opc.h (sh_arg_type): Add new operand types.
4125 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4127 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4129 * Makefile.in (distclean): Remove generated file config.h.
4131 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4133 * Makefile.in (distclean): Remove generated file config.h.
4135 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4137 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4139 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4141 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4142 rather than numopcodes. Use m68k_opcodes rather than removed
4143 opcode function. Don't check F_ALIAS.
4144 (print_insn_arg): Change first parameter to be const char *.
4145 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4146 (m68k-opc.o): New target.
4147 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4148 * configure: Rebuild.
4150 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4152 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4153 (opcode_bits, opcode_hash_table): New variables.
4154 (opcodes_initialized): Renamed from opcodes_sorted.
4155 (build_hash_table): New function.
4156 (is_delayed_branch): Use hash table.
4157 (print_insn): Renamed from print_insn_sparc, made static.
4158 Build and use hash table. If !sparc64, ignore sparc64 insns,
4159 and vice-versa if sparc64.
4160 (print_insn_sparc, print_insn_sparc64): New functions.
4161 (compare_opcodes): Move sparc64 opcodes to end.
4162 Print commutative insns with constant second.
4163 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4165 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4167 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4168 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4169 avoids printing a delay slot in a delay slot.
4170 * sh-opc.h (sh_table): Fully bracket last entry.
4172 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4174 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4176 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4178 * configure.in: Get host_makefile_frag from ${srcdir}.
4180 * configure.in: Autoconfiscated. Check for string[s].h. Create
4181 config.h from config.in. Don't set up sysdep.h link.
4182 * sysdep.h: New file.
4183 * configure, config.in: New files, generated from configure.in.
4184 * Makefile.in: Updated to be processed autoconf-style.
4185 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4186 (Makefile): Depend on config.status.
4187 (config.status): New rule.
4188 * configure.bat: Update Makefile substitutions.
4190 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4192 * mips-opc.c (L1): Define.
4193 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4194 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4197 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4199 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4200 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4201 have multiple add units but only a single logical unit.
4203 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4204 shifted by 18, without any insertion or extraction function.
4205 (insert_cr, extract_cr): Remove.
4207 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4209 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4212 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4214 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4215 * sh-opc.h: Add copyright.
4217 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4219 * Makefile.in (crunch-m68k): Delete extra target accidentally
4220 checked in a while ago.
4222 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4224 * sh-opc.h (sh_table): Add SH3 support.
4226 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4228 * sh-opc.h: Added bsrf and braf.
4230 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4232 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4233 bogus [ls]fm{ea,fd} patterns.
4235 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4236 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4237 initialize it from memory. Make function static.
4238 (print_insn_{big,little}_arm): New functions.
4239 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4240 the correct endianness.
4242 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4244 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4247 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4249 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4250 17th, so that it builds again using GCC as the compiler.
4252 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4254 * mips-dis.c (print_insn_little_mips): Cast return value from
4255 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4256 expects an unsigned long, and that might be fewer words of
4257 argument storage (e.g., if bfd_vma is long long on a 32-bit
4259 (print_insn_big_mips): Likewise with bfd_getb32 value.
4260 (_print_insn_mips): Now static.
4262 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4264 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4265 gcc memory hog problem with initializer is fixed.
4267 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4269 Merge in support for Mac MPW as a host.
4270 (Old change descriptions retained for informational value.)
4272 * mpw-config.in (archname): Compute from the config.
4273 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4275 * mpw-config.in (target_arch): Compute from canonical target.
4276 (m68k, mips, powerpc, sparc): Add architectures.
4277 * mpw-make.in (disassemble.c.o): Add.
4278 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4280 * mpw-config.in (BFD_MACHINES): Set to a default value.
4281 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4283 * mpw-make.in (CSEARCH): Add extra-include to search path.
4285 * mpw-config.in (varargs.h): Don't create.
4286 (sysdep.h): Create using forward-include.
4287 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4289 * mpw-config.in: New file, MPW version of configure.in.
4290 * mpw-make.in: New file, MPW version of Makefile.in.
4292 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4294 * alpha-dis.c (print_insn_alpha): Put empty statement after
4297 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4299 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4300 (low_sign_extend): Likewise.
4301 (get_field): Delete unused function.
4302 (set_field, deposit_14, deposit_21): Likewise.
4304 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4306 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4309 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4311 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4313 * alpha-opc.h (OSF_ASMCODE): define
4314 print pal-code names as defined in App C of the
4315 Alpha Architecture Reference Manual
4317 * alpha-dis.c: cleaned up output
4318 print stylized code forms as defined in App A.4.3 of the
4319 Alpha Architecture Reference Manual
4321 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4323 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4325 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4328 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4330 * m68k-dis.c (opcode): New function. Returns address of opcode
4331 table entry given index, even if the opcode table was split to
4332 work around gcc bugs.
4333 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4335 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4336 (reg_names): Now const.
4337 (print_insn_arg): Arrays cacheFieldName and names now const.
4338 (print_indexed): Array scales now const.
4340 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4342 * ppc-opc.c: Sort recently added instructions by minor opcode
4343 number within major opcode number.
4345 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4347 * hppa-dis.c: Include libhppa.h.
4349 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4351 * mips-opc.c: Change dli to use M_DLI, and add dla.
4353 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4355 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4357 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4359 * mips-opc.c: Add r4650 mul instruction.
4361 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4363 * mips-opc.c: Add uld and usd macros for unaligned double load and
4366 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4368 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4369 mfdcr, mtdcr, icbt, iccci.
4371 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4373 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4374 signed char fields to shorts, more portable.
4376 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4378 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4379 char fields as signed chars, since they may have negative values.
4381 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4383 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4384 (mycroft@netbsd.org).
4386 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4388 From "Logg, Ed" <elogg@ea.com>:
4389 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4390 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4393 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4395 * ppc-opc.c: Changes based on patch from David Edelsohn
4396 <edelsohn@mhpcc.edu>.
4397 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4400 (insert_tbr): New static function.
4401 (extract_tbr): New static function.
4402 (XFXFXM_MASK, XFXM): Define.
4403 (XSPRBAT_MASK, XSPRG_MASK): Define.
4404 (powerpc_opcodes): Add instructions to access special registers by
4405 name. Add mtcr and mftbu.
4407 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4409 * mips-opc.c (P3): Define.
4410 (mips_opcodes): Add mad and madu.
4412 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4414 * configure.in: Add W65 support.
4415 * disassemble.c: Likewise.
4416 * w65-opc.h, w65-dis.c: New files.
4418 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4420 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4423 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4425 * mips-opc.c: Add dli as a synonym for li.
4427 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4429 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4430 print something for reserved opcode values, even if it won't
4433 * mips-dis.c (_print_insn_mips): When initializing, shift right
4434 and mask, to avoid sign extension problems on the Alpha.
4436 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4439 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4441 * sh-opc.h (mov.l gbr): Get direction right.
4442 * sh-dis.c (print_insn_shx): New function.
4443 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4444 print opcodes with right byte order.
4446 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4448 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4449 to avoid conflicts with getopt.
4451 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4453 * hppa-dis.c (print_insn_hppa): Read the instruction using
4454 bfd_getb32, so that it works on a little endian or 64 bit host.
4455 Remove unused local variable op.
4457 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4459 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4460 addu does not work correctly if -mips3.
4462 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4464 * a29k-dis.c (print_special): Add special register names defined
4465 on 29030, 29040 and 29050.
4466 (print_insn): Handle new operand type 'I'.
4468 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4470 * Makefile.in (INSTALL): Use top level install.sh script.
4472 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4474 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4475 that it works on a little endian host.
4477 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4479 * configure.in: Use ${config_shell} when running config.bfd.
4481 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4483 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4485 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4487 * a29k-dis.c (print_insn): Print the opcode.
4489 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4491 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4493 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4495 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4497 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4499 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4500 which store a value into memory.
4502 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4504 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4505 * arm-dis.c, arm-opc.h: New files.
4507 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4509 * Makefile.in (ns32k-dis.o): Add dependency.
4510 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4511 string, not as array of chars.
4513 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4515 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4517 * sparc-opc.c: Added sparclite extended FP operations, and
4518 versions of v9 impdep* instructions permitting specification of
4521 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4523 * i960-dis.c (reg_names): Now const.
4524 (struct sparse_tabent): New type, copied from array type in mem
4526 (ctrl): Local static array ctrl_tab now const.
4527 (cobr): Local static array cobr_tab now const.
4528 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4529 static variable mem_tab no longer explicitly initialized. Changed
4530 mem_init to const array of struct sparse_tabent.
4531 (reg): Local static variable reg_tab no longer explicitly
4532 initialized. Changed reg_init to const array of struct
4534 (ea): Local static array scale_tab now const.
4536 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4539 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4541 * configure.bat: the disassember needs to be enabled for
4542 "objdump -d" to work in djgpp.
4544 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4546 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4547 (invalid_float): Enabled general version, doesn't require running
4548 on ns32k host. Changed to take char* argument, and test for
4549 explicitly specified sizes, instead of using sizeof() on host CPU
4551 (INVALID_FLOAT): Cast first argument.
4552 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4553 list_P032, list_M032): Now const.
4554 (optlist, list_search): Made appropriate arguments now point to
4556 (print_insn_arg): Changed static array of one-character-string
4557 pointers into a static const array of characters; fixed sprintf
4558 statement accordingly.
4560 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4562 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4563 from distribution. A ns32k-dis.c from a previous distribution has
4564 been brought up to date and supports the new interface.
4566 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4568 * configure.in: add bfd_ns32k_arch target support.
4570 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4571 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4573 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4575 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4578 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4580 * h8300-dis.c, mips-dis.c: Don't use true and false.
4582 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4584 * configure.in: Change --with-targets to --enable-targets.
4586 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4588 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4589 opcodes to the first instruction with that opcode, to speed
4590 disassembly of large files. From ralphc@pyramid.com (Ralph
4593 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4595 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4597 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4599 * configure.bat: update to latest makefile.in
4601 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4603 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4604 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4605 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4606 slot insn is in a delay slot.
4607 * z8k-opc.h: (resflg): Fix patterns.
4608 * h8500-opc.h Fix CR insn patterns.
4610 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4612 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4613 "cmpl" before POWER versions, so that gas -many uses them.
4615 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4617 * disassemble.c: New file.
4618 * Makefile.in (OFILES): Add disassemble.o.
4619 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4620 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4621 binutils/configure.in.
4623 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4624 opcode being examined.
4626 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4628 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4629 (insert_ral, insert_ram, insert_ras): New functions.
4630 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4631 RAS for store with update.
4633 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4635 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4636 (edelsohn@npac.syr.edu).
4638 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4640 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4643 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4645 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4647 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4649 * ppc-opc.c (powerpc_operands): The signedp field has been
4650 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4651 instead. Add new operand SISIGNOPT.
4652 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4653 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4654 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4657 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4659 * i386-dis.c (struct private): Renamed to dis_private. `private'
4660 is a reserved word for dynix cc.
4662 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4664 * configure.in: Change error message to refer to bfd/config.bfd
4665 rather than bfd/configure.in.
4667 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4669 * ppc-opc.c: Define POWER2 as short alias flag.
4670 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4673 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4675 * i960-dis.c (print_insn_i960): Don't read a second word for
4676 opcodes 0, 1, 2 and 3.
4678 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4680 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4682 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4684 * m68881-ext.c: Removed; no longer used.
4685 * Makefile.in: Changed accordingly.
4687 * m68k-dis.c (ext_format_68881): Don't declare.
4688 (print_insn_m68k): If an instruction uses place 'i', it uses at
4689 least four fixed bytes.
4690 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4691 extended float, convert to double using floatformat_to_double, not
4692 ieee_extended_to_double, and fetch the data before converting it.
4694 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4696 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4697 davidj@ICSI.Berkeley.EDU (David Johnson).
4699 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4701 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4702 PowerPC uses bdnz[l][a].
4704 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4706 * dis-buf.c, i386-dis.c: Include sysdep.h.
4708 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4710 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4712 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4713 by Motorola PowerPC 601 with PPC_OPCODE_601.
4714 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4715 Disassemble Motorola PowerPC 601 instructions as well as normal
4716 PowerPC instructions.
4718 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4720 * i960-dis.c (reg, mem): Just use a static array instead of
4723 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4725 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4726 condition name index if this is for a negated condition.
4728 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4729 Floating point format for 'H' operand is backwards from normal
4730 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4731 operands (fmpyadd and fmpysub), handle bizarre register
4732 translation correctly for single precision format.
4734 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4735 or 'I' operands if the next format specifier is 'M' (fcmp
4736 condition completer).
4738 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4740 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4741 single number giving a bitmask for the MB and ME fields of an M
4742 form instruction. Change NB to accept 32, and turn it into 0;
4743 also turn 0 into 32 when disassembling. Seperated SH from NB.
4744 (insert_mbe, extract_mbe): New functions.
4745 (insert_nb, extract_nb): New functions.
4746 (SC_MASK): Mask out SA and LK bits.
4747 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4748 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4749 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4750 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4751 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4752 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4753 (powerpc_macros): Define table of macro definitions.
4754 (powerpc_num_macros): Define.
4756 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4757 if PPC_OPERAND_NEXT is set.
4759 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4761 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4762 char. Retrieve contents using bfd_getl32 instead of shifting.
4764 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4766 * ppc-opc.c: New file. Opcode table for PowerPC, including
4767 opcodes for POWER (RS/6000).
4768 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4769 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4770 (CFILES): Add ppc-dis.c.
4771 (ppc-dis.o, ppc-opc.o): New targets.
4772 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4774 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4776 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4777 No space before 'u', 'f', or 'N'.
4779 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4781 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4782 farther than we should.
4784 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4786 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4788 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4790 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4792 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4793 needs it, to prevent reading past the end of a section.
4795 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4797 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4798 Removed t,A case for la; always use t,A(b) case.
4800 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4802 From Ted Lemen <mellon@pepper.ncd.com>
4803 * mips-dis.c (print_insn_arg): Handle 'k'.
4804 * mips-opc.c: Make cache use k, not t.
4806 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4808 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4809 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4810 FLOAT_FORMAT_CODE to put out floating point register names.
4812 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4814 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4816 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4818 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4820 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4822 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4823 larger than 32. Moved dsxx32 variants first for disassembler.
4825 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4827 * z8kgen.c, z8k-opc.h: Add full lda information.
4829 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4831 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4832 movb instructions. Any necessary space will be emitted by
4833 the code to handle nullification completers.
4835 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4837 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4839 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4841 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4842 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4844 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4846 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4848 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4850 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4851 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4853 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4855 * m88k-dis.c (m88kdis): comment change. Remove space after
4857 (printop): handle new arg types DEC and XREG for m88110.
4859 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4861 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4862 type for absolute branch addresses. Delete special
4863 "ble" and "be" code in 'W' operand code.
4865 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4867 * mips-opc.c: Set hazard information correctly for branch
4868 likely instructions.
4870 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4872 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4873 info->fprintf_func for printing and info->print_address_func for
4876 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4878 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4880 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4882 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4883 Corrected second case of "b" for disassembler.
4885 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4887 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4888 to BFD swapping routines to correspond to BFD name changes.
4890 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4892 * mips-opc.c: Change div machine instruction to be z,s,t rather
4893 than s,t. Change div macro to be d,v,t rather than d,s,t.
4894 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4895 rem and remu which generates only the corresponding div
4896 instruction. This is for compatibility with the MIPS assembler,
4897 which only generates the simple machine instruction when an
4898 explicit destination of $0 is used.
4899 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4901 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4903 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4904 WR_31 hazard for bal, bgezal, bltzal.
4906 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4908 * hppa-dis.c (print_insn_hppa): Use print function
4909 from within the disassemble_info, not fprintf_filtered.
4911 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4913 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4914 Law, law@cs.utah.edu.)
4916 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4918 * mips-opc.c ("absu"): Removed.
4921 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4923 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4924 Changed hazard information to distinguish between memory load
4925 delays and coprocessor load delays.
4927 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4929 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4931 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4933 * configure.in: Don't pass cpu to config.bfd.
4935 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4937 * m88k-dis.c (m88kdis): Make class unsigned.
4939 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4941 * alpha-dis.c (print_insn_alpha): One branch format case was
4942 missing the instruction name.
4944 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4946 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4947 Add the arch-specific auxiliary files.
4948 (OFILES): Remove the arch-specific auxiliary files
4949 and use BFD_MACHINES instead of DIS_LIBS.
4950 * configure.in: Set BFD_MACHINES based on --with-targets option.
4952 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4954 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4957 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4959 * sparc-opc.c: Change CONST to const to deal with gcc
4960 -Dconst=__const -traditional.
4962 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4964 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4965 coprocessor instructions out of #if 0, and made them use new
4968 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4970 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4972 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4974 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4975 instruction, for use by the disassembler.
4977 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4978 hand-coded sign extensions that depended on 32-bit host ints.
4979 FIXME, we still depend on big-endian host bitfield ordering.
4980 (sparc_print_insn): Set the insn_info_valid field, and the
4981 other fields that describe the instruction being printed.
4983 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4985 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4986 `jmp' instead of just one of them.
4988 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4990 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4991 (fput_fp_reg_r): Renamed from fput_reg_r.
4992 (fput_fp_reg): New function.
4993 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4995 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4997 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4999 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5001 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5003 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5004 don't output a space.
5006 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5008 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5010 * mips-opc.c: New file, containing opcode table from
5011 ../include/opcode/mips.h.
5012 * Makefile.in: Add it.
5014 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5016 * m88k-dis.c: New file, moved in from gdb and changed to use the
5017 new dis-asm.h disassembler interface.
5018 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5019 (m88k-dis.o): New target.
5021 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5023 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5024 argument string const char * to correspond to opcode/mips.h.
5026 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5028 * mips-dis.c: Updated to account for name changes in new version
5030 * Makefile.in: Added header file dependencies.
5032 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5034 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5036 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5038 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5039 extend, rather than shifts.
5041 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5043 * Makefile.in: Undo 15 June change.
5045 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5047 * m68k-dis.c (print_insn_arg): Change return value to byte count
5049 * m68k-dis.c: Re-write to detect invalid operands before
5050 printing anything, so we can handle this the same way we
5051 handle invalid opcodes.
5053 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5055 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5057 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5059 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5062 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5064 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5066 * configure.in: Do make sysdep.h link.
5067 * Makefile.in: Search ../include. Don't search ../bfd.
5069 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5071 Changes from Jeff Law, law@cs.utah.edu:
5072 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5073 Do not print a space before the completers specified by
5076 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5078 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5079 defined, since gdb has been fixed.
5081 Changes from Jeff Law, law@cs.utah.edu:
5082 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5083 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5084 be a *disassemble_info, not a *FILE.
5085 * hppa-dis.c: Support 'd', '!', and 'a'.
5086 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5087 * hppa-dis.c: Delete cases which are no longer needed.
5089 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5091 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5093 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5095 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5098 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5100 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5101 * configure.in: No longer need to configure to get sysdep.h.
5103 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5105 * Patches from Jeffrey Law <law@cs.utah.edu>.
5106 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5107 templates for 1.1 FP computational instructions.
5109 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5111 * h8500-dis.c (print_insn_h8500): Address argument is type
5113 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5116 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5117 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5119 * sparc-dis.c (compare_opcodes): Move static declaration to
5122 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5124 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5125 instruction, remove unimp hack from 'l' argument.
5127 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5129 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5132 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5134 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5135 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5138 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5140 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5141 arrays of string pointers to 2-d arrays of chars, to save
5144 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5146 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5147 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5149 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5151 * hppa-dis.c: New file from Utah, adapted to new disassembler
5153 * Makefile.in: Include it.
5155 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5157 * sh-dis.c, sh-opc.h: New files.
5159 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5161 * alpha-dis.c, alpha-opc.h: New files.
5163 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5165 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5168 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5170 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5172 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5174 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5177 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5179 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5180 and double percent signs a few places.
5182 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5184 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5185 Use info->print_address_func not print_address.
5187 * dis-buf.c (generic_print_address): New function.
5189 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5191 * Makefile.in: Add sparc-dis.c.
5192 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5194 Add `add' instruction to the set that get checked
5195 for a preceding `sethi' in order to print an absolute address.
5196 * (print_insn): Disassembly prefers real instructions.
5197 (is_delayed_branch): Speed up.
5198 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5199 Still missing some float ops, and needs testing.
5200 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5201 F_ALIAS. Use printf, not fprintf, when not passing a file
5203 (compare_opcodes): Check that identical instructions have
5204 identical opcodes, complain otherwise.
5207 * Include reg_names.
5209 Use dis-asm.h/read_memory_func interface.
5211 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5213 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5214 deliberately return non-zero to setjmp from longjmp. Otherwise
5215 this code fails to compile.
5217 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5219 * m68k-dis.c: Fix prototype for fetch_arg().
5221 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5223 * dis-buf.c: New file, for new read_memory_func interface.
5224 Makefile.in (OFILES): Include it.
5225 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5226 Use new read_memory_func interface.
5228 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5230 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5231 * h8500-opc.h: Fix couple of opcodes.
5233 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5235 * Makefile.in: add dvi & installcheck targets
5237 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5239 * Makefile.in: Update for h8500-dis.c.
5241 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5243 * h8500-dis.c, h8500-opc.h: New files
5245 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5247 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5248 ../include/dis-asm.h.
5249 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5250 and ../gdb/m68k-pinsn.c).
5251 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5252 and ../gdb/i386-pinsn.c).
5253 * m68881-ext.c: New file. Moved definition of
5254 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5255 * Makefile.in: Adjust for new files.
5256 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5257 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5258 can be dis-assembled.
5260 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5262 * mips-dis.c (print_insn_arg): Now returns void.
5264 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5266 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5267 files that use the macros.
5269 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5271 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5272 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5273 (CFILES): Added mips-dis.c.
5275 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5277 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5278 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5280 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5282 * Makefile.in: Improve *clean rules.
5283 * configure.in: Allow a default host.
5285 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5287 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5288 files include other sysdep files
5290 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5292 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5294 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5296 * configure.in: For host support, use ../bfd/configure.host
5297 so it stays in sync with the ../bfd/hosts database.
5299 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5301 * configure.in: use cpu-vendor-os triple instead of nested cases
5303 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5305 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5306 *always* the wrong one.
5308 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5310 * z8kgen.c: added copyright info
5312 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5314 * z8k-dis.c (unparse_instr): prettier tabs
5315 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5317 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5319 * configure.in: Add ncr* configuration.
5320 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5321 picayune ANSI compilers happy.
5323 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5325 * configure.in (i386): Make i386 and i486 synonymous for now.
5326 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5328 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5330 * Makefile.in (install): Fix typo.
5332 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5334 * Makefile.in (make): Remove obsolete crud.
5335 (sparc-opc.o): Avoid Sun Make VPATH bug.
5337 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5339 * Makefile.in: since there are no SUBDIRS, remove rule and
5340 references of subdir_do.
5342 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5344 * Makefile.in (install): Get the library name right here too.
5345 Don't install bfd.h, since it's unrelated to this library. No
5346 subdirs to recurse into, either.
5347 (CFILES): The source file has a .c suffix, not .o.
5349 * sparc-opc.c: New file, moved from BFD.
5350 * Makefile.in (OFILES): Build it.
5352 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5354 * z8k-dis.c: fixed forward refferences of some declarations.
5356 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5358 * Makefile.in: get the name of the library right
5360 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5362 * z8k-dis.c: knows how to disassemble z8k stuff
5363 * z8k-opc.h: new file full of z8000 opcodes
5367 version-control: never
projects / deliverable / binutils-gdb.git / blob