1 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
3 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
4 (print_insn_ppi): Likewise.
5 (print_insn_shx): Use info->mach to select appropriate insn set.
6 Add support for sh-dsp. Remove FD_REG_N support.
7 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
8 (sh_arg_type): Likewise. Remove FD_REG_N.
9 (sh_dsp_reg_nums): New enum.
10 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
11 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
12 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
13 (arch_sh3_dsp_up): Likewise.
14 (sh_opcode_info): New field: arch.
15 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
16 D_REG_N. Fill in arch field. Add sh-dsp insns.
18 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
20 * arm-dis.c: Change flavor name from atpcs-special to
21 special-atpcs to prevent name conflict in gdb.
22 (get_arm_regname_num_options, set_arm_regname_option,
23 get_arm_regnames): New functions. API to access the several
24 flavor of register names. Note: Used by gdb.
25 (print_insn_thumb): Use the register name entry from the currently
26 selected flavor for LR and PC.
28 2000-02-10 Nick Clifton <nickc@cygnus.com>
30 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
32 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
33 "mulsh.h" instructions.
34 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
36 (print_insn_mcore): Add support for little endian targets.
37 Add support for MULSH and OPSR classes.
39 2000-02-07 Nick Clifton <nickc@cygnus.com>
41 * arm-dis.c (parse_arm_diassembler_option): Rename again.
42 Previous delat did not take.
44 2000-02-03 Timothy Wall <twall@redhat.com>
46 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
47 to adjust target address bounds checking and calculate the
48 appropriate octet offset into data.
50 2000-01-27 Nick Clifton <nickc@redhat.com>
52 * arm-dis.c: (parse_disassembler_option): Rename to
53 parse_arm_disassembler_option and allow to be exported.
55 * disassemble.c (disassembler_usage): New function: Print out any
56 target specific disassembler options.
57 Call arm_disassembler_options() if the ARM architecture is being
60 * arm-dis.c (NUM_ELEM): Define this macro if not already
62 (arm_regname): New struct type for ARM register names.
63 (arm_toggle_regnames): Delete.
64 (parse_disassembler_option): Use register name structure.
65 (print_insn): New function: Combines duplicate code found in
66 print_insn_big_arm and print_insn_little_arm.
67 (print_insn_big_arm): Call print_insn.
68 (print_insn_little_arm): Call print_insn.
69 (print_arm_disassembler_options): Display list of supported,
70 ARM specific disassembler options.
72 2000-01-27 Thomas de Lellis <tdel@windriver.com>
74 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
75 ARM_STT_16BIT flag as Thumb code symbols.
77 * arm-dis.c (printf_insn_little_arm): Ditto.
79 2000-01-25 Thomas de Lellis <tdel@windriver.com>
81 * arm-dis.c (printf_insn_thumb): Prevent double dumping
82 of raw thumb instructions.
84 2000-01-20 Nick Clifton <nickc@cygnus.com>
86 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
88 2000-01-03 Nick Clifton <nickc@cygnus.com>
90 * arm-dis.c (streq): New macro.
92 (force_thumb): ew local variable.
93 (parse_disassembler_option): New function: Parse a single, ARM
94 specific disassembler command line switch.
95 (parse_disassembler_option): Call parse_disassembler_option to
96 parse individual command line switches.
97 (print_insn_big_arm): Check force_thumb.
98 (print_insn_little_arm): Check force_thumb.
100 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
102 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
104 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
106 * m10300-opc.c, m10300-dis.c: Add am33 support.
108 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
110 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
111 (print_insn_hppa): Handle 'B' operand.
113 1999-11-22 Nick Clifton <nickc@cygnus.com>
115 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
117 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
119 * mips-opc.c (I5): New.
120 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
121 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
122 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
124 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
126 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
127 * arm-opc.h (print_insn_arm): Added comment documenting
128 the 'X' format just added to arm-dis.c.
130 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
132 * mips-opc.c (la): Create a version that just uses addiu directly.
133 (dla): Expand to daddiu if possible.
135 1999-11-11 Nick Clifton <nickc@cygnus.com>
137 * mips-opc.c: Add ssnop pattern.
139 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
141 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
143 1999-10-29 Nick Clifton <nickc@cygnus.com>
145 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
146 (d30v_format_tab): Define the SHORT_AR format.
148 1999-10-28 Nick Clifton <nickc@cygnus.com>
150 * mcore-dis.c: Remove spurious code introduced in previous delta.
152 1999-10-27 Scott Bambrough <scottb@netwinder.org>
154 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
156 1999-10-18 Michael Meissner <meissner@cygnus.com>
158 * alpha-opc.c (alpha_operands): Fill in missing initializer.
159 (alpha_num_operands): Convert to unsigned.
160 (alpha_num_opcodes): Ditto.
161 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
166 (extract_bdisp): Ditto.
167 (extract_jhint): Ditto.
168 (extract_ev6hwjhint): Ditto.
170 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
172 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
175 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
177 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
179 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
181 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
182 rac/rachi instructions.
183 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
186 1999-10-04 Doug Evans <devans@casey.cygnus.com>
188 * fr30-asm.c,fr30-desc.h: Rebuild.
189 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
190 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
192 1999-09-29 Nick Clifton <nickc@cygnus.com>
194 * sh-opc.h: Fix bit patterns for several load and store
197 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
199 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
200 cleaner code using completer prefixes. Add 'Y'.
202 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
204 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
206 * hppa-dis.c (extract_22): New function.
208 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
210 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
212 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
214 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
216 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
218 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
220 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
222 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
224 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
226 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
228 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
230 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
233 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
235 * hppa-dis.c: (print_insn_hppa): Add missing break after
238 * hppa-dis.c: Finish constifying various completers, register
241 1999-09-14 Michael Meissner <meissner@cygnus.com>
243 * configure.in (Canonicalization of target names): Remove adding
244 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
245 generates $ac_config_sub with a ${CONFIG_SHELL} already.
246 * configure: Regenerate.
248 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
250 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
252 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
254 1999-09-07 Nick Clifton <nickc@cygnus.com>
256 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
257 names for the mulu and muls patterns.
259 1999-09-04 Steve Chamberlain <sac@pobox.com>
261 * pj-opc.c: New file.
262 * pj-dis.c: New file.
263 * disassemble.c (disassembler): Handle bfd_arch_pj.
264 * configure.in: Handle bfd_pj_arch.
265 * Makefile.am: Rebuild dependencies.
266 (CFILES): Add pj-dis.c and pj-opc.c.
267 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
268 * configure, Makefile.in: Rebuild.
270 1999-09-04 H.J. Lu <hjl@gnu.org>
272 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
274 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
276 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
278 1999-08-04 Doug Evans <devans@casey.cygnus.com>
280 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
281 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
282 * m32r-opinst.c: Rebuild.
284 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
286 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
287 register args by 'f'.
289 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
291 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
292 extract_10U_store): New.
293 (print_insn_hppa): Add new completers.
295 * hppa-dis.c (signed_unsigned_names,mix_half_names,
296 saturation_names): New.
297 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
299 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
301 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
303 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
304 to decide to print a space.
306 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
308 * i386-dis.c: Add AMD athlon instruction support.
310 1999-08-10 Ian Lance Taylor <ian@zembu.com>
312 From Wally Iimura <iimura@microunity.com>:
313 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
314 overflow at end of address space.
315 (generic_print_address): Use sprintf_vma.
317 1999-08-08 Ian Lance Taylor <ian@zembu.com>
319 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
320 MKDEP. Rebuild dependencies.
321 * Makefile.in: Rebuild.
323 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
325 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
326 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
327 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
328 (print_insn_hppa): Add 64 bit condition completers.
330 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
332 * hppa-dis.c (print_insn_hppa): Change condition args to use
335 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
337 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
340 1999-07-21 Ian Lance Taylor <ian@zembu.com>
343 * configure.bat: Remove; obsolete.
345 1999-07-11 Ian Lance Taylor <ian@zembu.com>
347 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
348 (generic_strcat_address): Add cast to avoid warning.
349 * i386-dis.c: Initialize all structure fields to avoid warnings.
350 Add ATTRIBUTE_UNUSED as appropriate.
352 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
354 * sparc-dis.c (print_insn_sparc): Differentiate between
355 addition and oring when guessing symbol for comment.
357 1999-07-05 Nick Clifton <nickc@cygnus.com>
359 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
362 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
364 * i386-dis.c: Mention intel mode specials in macro char comment.
366 1999-06-21 Ian Lance Taylor <ian@zembu.com>
368 * alpha-dis.c: Don't include <stdlib.h>.
369 * arm-dis.c: Include "sysdep.h".
370 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
372 * Makefile.am: Rebuild dependencies.
373 * Makefile.in: Rebuild.
375 1999-06-16 Nick Clifton <nickc@cygnus.com>
377 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
380 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
382 * arm-dis.c (arm_regnames): Turn into a pointer to a register
384 (arm_regnames_standard): New variable: Array of ARM register
385 names according to ARM instruction set nomenclature.
386 (arm_regnames_apcs): New variable: Array of ARM register names
387 according to ARM Procedure Call Standard.
388 (arm_regnames_raw): New variable: Array of ARM register names
389 using just 'r' and the register number.
390 (arm_toggle_regnames): New function: Toggle the chosen register set
392 (parse_disassembler_options): New function: Parse any target
393 disassembler command line options.
394 (print_insn_big_arm): Call parse_disassembler_options if any
396 (print_insn_little_arm): Call parse_disassembler_options if any
399 1999-06-13 Ian Lance Taylor <ian@zembu.com>
401 * i386-dis.c (FWAIT_OPCODE): Define.
402 (used_prefixes): New static variable.
403 (fetch_data): Don't print an error message if we have already
404 fetched some bytes successfully.
405 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
406 (prefix_name): New static function.
407 (print_insn_i386): If setjmp fails, indicating a data error, but
408 we have managed to fetch some bytes, print the first one as a
409 prefix or a .byte pseudo-op. If fwait is followed by a non
410 floating point instruction, print the first prefix. Set
411 used_prefixes when prefixes are used. If any prefixes were not
412 used after disassembling the instruction, print the first prefix
413 instead of printing the instruction.
414 (putop): Set used_prefixes when prefixes are used.
415 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
416 (OP_DIR, OP_SIMD_Suffix): Likewise.
418 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
420 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
421 Support signx %reg, clruw %reg.
423 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
425 * sparc-opc.c: Add aliases Solaris as supports.
427 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
429 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
430 * Makefile.in: Regenerated.
432 1999-06-03 Philip Blundell <philb@gnu.org>
434 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
435 when target is PC-relative.
437 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
439 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
442 * m68k-dis.c (fetch_arg): Add places `n', `o'.
444 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
445 Add mcf5206e to appropriate instructions.
446 Add alias for MAC, MSAC.
448 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
451 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
452 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
454 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
456 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
458 * i386-dis.c (Ed): Define.
459 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
461 (OP_rm): Rename to OP_Rd.
464 (putop): Add const to template and p.
465 (print_insn_x86): Delete.
466 (print_insn_i386): Merge old function print_insn_x86. Add const
468 (struct dis386): Add const to name.
469 (dis386_att, dis386_intel): Add const.
470 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
471 (names32, names16, names8, names_seg, index16): Add const.
472 (grps, prefix_user_table, float_reg): Add const.
473 (float_mem_att, float_mem_intel): Add const.
474 (oappend): Add const to s.
475 (OP_REG): Add const to s.
476 (ptr_reg): Add const to s.
477 (dofloat): Add const to dp.
478 (OP_C): Don't skip modrm, it's now done in OP_Rd.
481 (OP_Rd): Check for valid mod. Call Op_E to print.
482 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
483 (OP_MS): Check for valid mod. Call Op_EM to print.
484 (OP_3DNowSuffix): Set obufp and use oappend rather than
485 strcat. Call BadOp() for errors.
486 (OP_SIMD_Suffix): Likewise.
487 (BadOp): New function.
489 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
491 * i386-dis.c (dis386_intel): Remove macro chars, except for
492 jEcxz. Change cWtR and cRtd to cW and cR.
493 (dis386_twobyte_intel): Remove macro chars here too.
494 (putop): Handle R and W macros for intel mode.
496 * i386-dis.c (SIMD_Fixup): New function.
497 (dis386_twobyte_att): Use it on movlps and movhps, and change
498 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
499 (dis386_twobyte_intel): Same here.
501 * i386-dis.c (Av): Remove.
505 (OP_SIMD_Suffix): New function.
506 (OP_DIR): Remove dead code.
507 (eAX_reg..eDI_reg): Renumber.
508 (onebyte_has_modrm): Table numbering comments.
509 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
510 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
511 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
512 and handle SIMD cmp insns in OP_SIMD_Suffix.
513 (info->bytes_per_line): Bump from 5 to 6.
515 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
516 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
518 PIII SIMD support from Doug Ledford <dledford@redhat.com>
519 * i386-dis.c (XM, EX, None): Define.
520 (OP_XMM, OP_EX, OP_None): New functions.
521 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
522 (GRP14): Rename to GRPAMD.
523 (GRP*): Add USE_GROUPS flag.
525 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
526 (twobyte_has_modrm): Add SIMD entries.
527 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
528 (grps): Add SIMD insns.
529 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
530 oappend repz if uses_f3_prefix. Add code to handle new groups for
533 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
534 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
535 operand from Av to Jv.
537 1999-05-07 Nick Clifton <nickc@cygnus.com>
539 * mcore-dis.c (print_insn_mcore): Use .short to display
540 unidentified instructions, not .word.
542 1999-04-26 Tom Tromey <tromey@cygnus.com>
544 * aclocal.m4, configure: Updated for new version of libtool.
546 1999-04-14 Doug Evans <devans@casey.cygnus.com>
548 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
549 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
551 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
553 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
556 1999-04-10 Doug Evans <devans@casey.cygnus.com>
558 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
559 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
561 1999-04-06 Ian Lance Taylor <ian@zembu.com>
563 * opintl.h (LC_MESSAGES): Never define.
565 1999-04-04 Ian Lance Taylor <ian@zembu.com>
567 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
568 (separator_char, scale_char): Likewise.
569 (print_insn_x86): Likewise.
570 (print_insn_i386): Likewise. Add declaration.
572 1999-03-26 Doug Evans <devans@casey.cygnus.com>
574 * fr30-dis.c: Rebuild.
575 * m32r-dis.c: Rebuild.
577 1999-03-23 Ian Lance Taylor <ian@zembu.com>
579 * m68k-opc.c: Change compare instructions to use "@s" rather than
580 ";s" when used with an immediate operand.
582 1999-03-22 Doug Evans <devans@casey.cygnus.com>
584 * cgen-opc.c (cgen_set_cpu): Delete.
585 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
586 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
588 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
590 * po/opcodes.pot: Rebuild.
592 1999-03-16 Martin Hunt <hunt@cygnus.com>
594 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
596 1999-03-11 Doug Evans <devans@casey.cygnus.com>
598 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
599 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
600 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
601 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
602 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
603 * m32r-opinst.c: Rebuild.
605 1999-02-25 Doug Evans <devans@casey.cygnus.com>
607 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
608 (cgen_hw_lookup_by_num): Rewrite.
609 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
610 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
611 * m32r-opinst.c: Rebuild.
613 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
615 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
616 (insert_jhint): Fix insertion mask.
617 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
619 1999-02-10 Doug Evans <devans@casey.cygnus.com>
621 * Makefile.in: Rebuild.
623 1999-02-09 Doug Evans <devans@casey.cygnus.com>
625 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
626 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
627 * Makefile.am: Remove references to them.
628 (HFILES): Add fr30-desc.h,m32r-desc.h.
629 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
631 (ALL_MACHINES): Update.
632 * configure.in: Redo handling of cgen_files.
633 (bfd_i960_arch): Delete i960c-*.lo files.
634 * configure: Regenerate.
635 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
636 (hash_insn_array): Rewrite.
637 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
638 (hash_insn_array): Rewrite.
639 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
640 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
641 (cgen_lookup_get_insn_operands): Ditto.
642 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
643 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
644 * po/POTFILES.in: Rebuild.
645 * po/opcodes.pot: Rebuild.
647 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
649 * Makefile.am: Rebuild dependencies.
650 (HFILES): Add fr30-opc.h.
651 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
652 * Makefile.in: Rebuild.
654 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
655 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
657 * acconfig.h: Remove.
658 * configure: Rebuild with current autoconf/automake.
659 * aclocal.m4: Likewise.
660 * config.in: Likewise.
661 * Makefile.in: Likewise.
663 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
665 * m68k-opc.c: Correct move (not movew) to status word on 5200.
667 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
669 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
670 * i386-dis.c (x_mode): Define.
674 (dis386_twobyte): Remove.
675 (dis386_twobyte_att): New.
676 (dis386_twobyte_intel): New.
677 (print_insn_x86): Use new arrays.
679 (float_mem_intel): New.
680 (float_mem_att): New.
681 (dofloat): Use new float_mem arrays.
682 (print_insn_i386_att): New.
683 (print_insn_i386_intel): New.
684 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
685 (putop): Handle intel syntax.
686 (OP_indirE): Handle intel syntax.
687 (OP_E): Handle intel syntax.
688 (OP_I): Handle intel syntax.
689 (OP_sI): Handle intel syntax.
690 (OP_OFF): Handle intel syntax.
694 1999-01-27 Doug Evans <devans@casey.cygnus.com>
696 * fr30-opc.h,fr30-opc.c: Rebuild.
697 * i960c-opc.h,i960c-opc.c: Rebuild.
698 * m32r-opc.c: Rebuild.
700 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
702 * hppa-dis.c: revert HP merge changes until HP gives us
705 1999-01-19 Nick Clifton <nickc@cygnus.com>
707 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
708 offsets as well as symbloic address.
710 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
712 * hppa-dis.c: fix comments and some indentation.
714 1999-01-12 Doug Evans <devans@casey.cygnus.com>
716 * fr30-opc.c,i960c-opc.c: Regenerate.
718 1999-01-11 Doug Evans <devans@casey.cygnus.com>
720 * fr30-opc.c: Regenerate.
722 1999-01-06 Doug Evans <devans@casey.cygnus.com>
724 * m32r-dis.c: Regenerate.
726 1999-01-05 Doug Evans <devans@casey.cygnus.com>
728 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
729 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
730 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
732 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
734 * configure.in: Require autoconf 2.12.1 or higher.
736 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
738 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
740 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
742 * fr30-opc.c: Regenerated.
744 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
746 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
748 1998-12-15 Dave Brolley <brolley@cygnus.com>
750 * fr30-opc.c,fr30-opc.h: Regenerated.
752 1998-12-14 Dave Brolley <brolley@cygnus.com>
754 * fr30-opc.c,fr30-opc.h: Regenerated.
756 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
758 * fr30-opc.c,fr30-opc.h: Regenerated.
760 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
762 * m32r-opc.c: Regenerate.
764 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
766 * dis-buf.c (generic_strcat_address): reformat to GNU coding
767 conventions. change sprintf call to an sprintf_vma call.
769 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
771 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
773 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
775 The following changes were made by
776 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
777 David Taylor <taylor@texas.cygnus.com>, and
778 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
779 merge in changes by HP; HP did not create ChangeLog entries.
781 * dis-buf.c (generic_strcat_address): new function.
783 * hppa-dis.c: Changes to improve hppa disassembly.
784 Changed formatting in : reg_names, fp_reg_names,control_reg,
785 New variables : sign_extension_names, deposit_names, conversion_names
786 float_test_names, compare_cond_names_double, add_cond_names_double,
787 logical_cond_names_double, unit_cond_names_double,
788 branch_push_pop_names, saturation_names, shift_names, mix_names,
789 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
790 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
791 (fput_const): renamed as fput_hex_const
793 - use the macros fputs_filtered and
794 fput_decimal_const whenever possible; calls to sign_extend require
795 2 params -- add a missing second param of 0.
796 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
797 architecture version number of current machine. HP folks are
798 trying to handle situation where the target program was compiled
799 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
801 - added new cases : 'g', 'B', 'm'
802 - added cases specifically for PA 2.0
803 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
804 - calls to fput_const become calls to fput_hex_const
806 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
808 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
809 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
810 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
811 * Makefile.in: Rebuilt.
812 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
814 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
815 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
817 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
819 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
821 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
823 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
825 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
826 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
828 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
830 * fr30-opc.c: Regenerate.
832 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
834 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
836 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
838 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
840 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
842 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
844 1998-11-30 Doug Evans <devans@casey.cygnus.com>
846 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
847 CGEN_INSN_BASE_VALUE.
848 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
849 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
851 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
853 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
855 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
857 * fr30-asm.c,fr30-dis.c: Regenerated.
859 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
861 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
863 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
865 * fr30-opc.c: Regenerated.
867 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
869 * fr30-opc.c: Regenerated.
870 * fr30-opc.h: Regenerated.
871 * fr30-dis.c: Regenerated.
872 * fr30-asm.c: Regenerated.
874 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
876 * mips-opc.c (sync.p,sync.l): Swap insn values.
878 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
880 * fr30-opc.c: Regenerate.
882 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
884 * fr30-opc.c: Regenerated.
885 * fr30-opc.h: Regenerated.
887 1998-11-18 Doug Evans <devans@casey.cygnus.com>
889 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
890 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
892 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
894 * fr30-opc.c: Regenerated.
896 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
898 * fr30-opc.c: Regenerated.
899 * fr30-opc.h: Regenerated.
900 * fr30-dis.c: Regenerated.
901 * fr30-asm.c: Regenerated.
903 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
905 * po/opcodes.pot: Regenerated.
906 * fr30-opc.c: Regenerated.
907 * fr30-opc.h: Regenerated.
908 * fr30-dis.c: Regenerated.
909 * fr30-asm.c: Regenerated.
911 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
913 * disassemble.c (disassembler): Add support for FR30 target.
915 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
917 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
918 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
920 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
922 * po/opcodes.pot: Regenerate.
923 * po/POTFILES.in: Regenerate.
924 * fr30-opc.c: Regenerate.
925 * fr30-opc.h: Regenerate.
927 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
929 * m32r-asm.c: Regenerate.
931 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
933 * configure.in: Added case for bfd_fr30_arch.
934 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
935 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
936 (CLEANFILES): Added stamp-fr30.
938 * fr30-asm.c: New file.
939 * fr30-dis.c: New file.
940 * fr30-opc.c: New file.
941 * fr30-opc.h: New file.
942 * po/POTFILES.in: Regenerated
943 * po/opcodes.pot: Regenerated
945 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
947 * configure.in: detect cygwin* instead of cygwin32*
948 * configure: regenerate
950 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
952 * mips-opc.c (IS_M): Added.
954 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
956 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
958 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
960 * m32r-opc.h,m32r-opc.c: Regenerate.
962 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
964 * i386-dis.c (OP_3DNowSuffix): New static function.
967 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
968 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
969 (insn_codep): New static variable.
970 (print_insn_x86): Init insn_codep after prefixes.
971 (grps): Add GRP14 entries for prefetch, prefetchw.
974 From Jeff B Epler <jepler@usgs.gov>
975 * i386-dis.c (Suffix3DNow): New table.
977 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
979 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
981 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
983 * d10v-dis.c (print_operand): If num is nonzero, then
984 add OPERAND_ACC1, not OPERAND_ACC0.
986 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
988 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
991 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
993 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
996 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
998 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1000 1998-09-09 Michael Meissner <meissner@cygnus.com>
1002 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1005 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1007 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1009 (print_insn_little_arm): Detect Thumb symbols in elf object
1012 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1014 * alpha-dis.c (print_insn_alpha): Use the machine type to
1015 decide which PALcode set to include.
1017 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1019 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1021 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1023 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1024 MSUB and MSUBS instructions.
1026 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1028 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1029 operand name macros.
1031 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1033 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1034 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1035 +, -, and d for ColdFire.
1037 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1038 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1039 (extract_mbe): Likewise.
1041 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1043 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1045 * m10300-opc.c: First cut at UDF instructions.
1047 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1049 * m32r-opc.c: Regenerate (remove semantic descriptions).
1051 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1053 * arm-dis.c (print_insn_big_arm): Fix indentation.
1054 (print_insn_little_arm): Likewise.
1056 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1058 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1060 (print_insn_little_arm): Likewise.
1062 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1064 Move all global state data into opcode table struct, and treat
1065 opcode table as something that is "opened/closed".
1066 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1067 (cgen_asm_init): Delete.
1068 (cgen_set_parse_operand_fn): New function.
1069 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1070 (cgen_dis_init): Delete.
1071 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1072 (cgen_current_{opcode_table_mach,endian}): Delete.
1073 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1075 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1077 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1080 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1082 * m10300-opc.c: Add entries for "no_match_operands" field in
1085 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1087 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1089 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1091 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1093 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1095 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1097 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1099 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1100 will be masked later.
1102 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1104 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1106 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1108 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1110 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1112 * m10300-dis.c: Only recognize instructions from the currently
1114 * m10300-opc.c: Add field indicating the particular variant of
1115 the mn10300 each instruction is available on.
1117 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1119 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1120 * Makefile.am: Rebuild dependencies.
1121 (CFILES): Add vax-dis.c.
1122 (ALL_MACHINES): Add vax-dis.lo.
1123 * aclocal.m4: Rebuild with current libtool.
1124 * configure, Makefile.in: Rebuild.
1126 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1128 * vax-dis.c: New file, from work by Pauline Middelink
1129 <middelin@polyware.iaf.nl>.
1130 * disassemble.c (ARCH_vax): Define if ARCH_all.
1131 (disassembler): Add case for ARCH_vax.
1132 * makefile.vms: Support compilation on vms/vax.
1134 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1136 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1137 related to sign extension and the size of ints.
1139 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1141 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1142 instructions. Support (sp) addressing mode by expanding it into
1145 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1147 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1149 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1151 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1153 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1155 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1158 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1160 * mips-dis.c (print_insn_little_mips): Previously, instruction
1161 printing references the symbol table to determine whether the
1162 instruction resides in a block regular instructions or mips16
1163 instructions. However, when the disassembler gets used in other
1164 environments where the symbol table is not present, we no longer
1165 rely in the symbol table, rather, use the low bit of the
1166 instructions address to guess. There should be no change for usage
1167 of the disassembler in host based programs, gdb, objdump.
1168 (print_insn_big_mips): ditto.
1169 (print_insn_mips): ditto
1171 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1173 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1175 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1177 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1179 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1181 * i386-dis.c (index16): Add '%' to register names. Use ','
1184 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1186 * i386-dis.c: Don't print opcode suffix when we can figure out the
1187 size (and gas can!) by register operands, or from the default
1189 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1191 (dis386, dis386_twobyte, grps): Use new suffix macros.
1192 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1193 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1194 order of cmps operands to agree with Intel docs. Correct operand
1195 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1196 agree with Intel docs.
1197 (print_insn_x86): Print orphan fwait before other prefixes.
1198 Return correct byte count for orphan fwait with prefixes. Don't
1199 print `bound' operands in reverse order.
1200 (ckprefix): Stop accumulating prefixes if we get fwait.
1201 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1203 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1205 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1206 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1208 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1210 Fix problems when bfd_vma is wider than long.
1211 * i386-dis.c: Make op_address and start_pc unsigned.
1212 (set_op): Make parameter unsigned.
1213 (print_insn_x86): Cast to bfd_vma when passing a value to
1215 * ns32k-dis.c (CORE_ADDR): Don't define.
1216 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1217 bfd_scan_vma to read back address.
1218 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1220 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1221 (NEXTULONG): New definition.
1222 (print_insn_m68k): Avoid overflow when computing third argument of
1224 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1225 Use disp instead of val to store offset values.
1226 (print_indexed): Use base_disp instead of word to store base
1227 displacement, to avoid overflow.
1228 * m10300-dis.c (disassemble): Cast value to long when computing
1229 pc-relative address, to get correct sign extension.
1231 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1233 * m32r-opc.c: Regenerate.
1235 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1237 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1238 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1240 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1242 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1244 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1246 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1248 (OP_DSreg): Rename from OP_DSSI.
1249 (OP_ESreg): Rename from OP_ESDI.
1250 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1252 (append_seg): Rename from append_prefix.
1253 (ptr_reg): New function.
1254 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1256 (PREFIX_ADDR): Rename from PREFIX_ADR.
1257 (float_reg): Add non-broken opcodes for people who don't want
1260 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1262 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1265 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1267 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1269 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1271 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1272 0; produce error message for shifts of size 32 (or 64 for 64-bit
1273 shifts), because the hardware doesn't support them.
1275 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1277 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1278 LONG_2, LONG_2b formats to use this new operand.
1280 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1282 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1284 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1286 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1287 endian data support.
1289 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1291 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1292 and SHORT_B3b formats to use Rb instead of Ra.
1294 Add FLAG_MUL16 to MUL2XH opcode.
1296 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1297 to existing 1.1.1 parallelisation prohibition procedure.
1299 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1301 * m32r-asm.c,m32r-dis.c: Regenerate.
1303 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1305 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1306 with a shift count of 0.
1308 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1310 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1311 (cgen_hw_lookup_by_num): New function.
1313 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1315 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1317 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1319 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1320 as big-endian on SPARClite.
1322 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1324 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1326 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1328 * po/Make-in (install-info): New target.
1330 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1332 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1333 * configure: Rebuild.
1335 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1337 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1338 variety of ISA2 instructions to set bottom ten bits of trap code.
1340 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1342 * Makefile.am (config.status): Add explicit target so that
1343 config.status depends upon bfd/configure.in.
1344 * Makefile.in: Rebuild.
1346 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1348 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1349 instructions to set bottom ten bits of break code.
1350 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1351 for above optional argument.
1353 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1355 * makefile.vms: Run dec c with /nodebug.
1357 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1359 * Makefile.in: Rebuilt.
1360 * Makefile.am: Regenerated dependencies with mkdep.
1362 * opintl.h (_): Define as dgettext.
1364 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1366 * cgen-asm.c: Internationalised.
1367 * m32r-asm.c: Internationalised.
1368 * m32r-dis.c: Internationalised.
1369 * m32r-opc.c: Internationalised.
1371 * aclocal.m4: Regenerated.
1372 * configure: Regenerated.
1373 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1374 * Makefile.in: Rebuild.
1375 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1376 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1378 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1380 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1382 * aclocal.m4, configure: Rebuild with current tools.
1384 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1386 * opintl.h: New file - contains internationalisation macros used
1387 by source files in this directory.
1388 * po/: New subdirectory - contains internationalisation files.
1389 * po/Make-in: New file - Makefile constructor.
1390 * po/POTFILES.in: New file - list of files in opcodes directory
1391 that should be scan for internationalisation macros.
1392 * po/opcodes.pot: New file - list of internationisation strings
1393 found in files mentioned in po/POTFILES.in.
1394 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1395 entry. Add intl directory to include paths.
1396 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1397 HAVE_STRCPY, HAVE_LC_MESSAGES
1398 * configure.in: Add rule to build Makefile in po subdirectory.
1399 * Makefile.in: Rebuilt.
1400 * aclocal.m4: Rebuilt.
1401 * config.in: Rebuilt.
1402 * configure: Rebuilt.
1403 * alpha-opc.c: Internationalised.
1404 * arc-dis.c: Internationalised.
1405 * arc-opc.c: Internationalised.
1406 * arm-dis.c: Internationalised.
1407 * cgen-asm.c: Internationalised.
1408 * d30v-dis.c: Internationalised.
1409 * dis-buf.c: Internationalised.
1410 * h8300-dis.c: Internationalised.
1411 * h8500-dis.c: Internationalised.
1412 * i386-dis.c: Internationalised.
1413 * m10200-dis.c: Internationalised.
1414 * m10300-dis.c: Internationalised.
1415 * m68k-dis.c: Internationalised.
1416 * m88k-dis.c: Internationalised.
1417 * mips-dis.c: Internationalised.
1418 * ns32k-dis.c: Internationalised.
1419 * opintl.h: Internationalised.
1420 * ppc-opc.c: Internationalised.
1421 * sparc-dis.c: Internationalised.
1422 * v850-dis.c: Internationalised.
1423 * v850-opc.c: Internationalised.
1425 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1427 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1428 (asm_hash_table_entries): New variable.
1429 (cgen_asm_init): Free asm_hash_table_entries.
1430 (hash_insn_array,hash_insn_list): New functions.
1431 (build_asm_hash_table): Use them. Hash macro insns as well.
1432 (cgen_asm_lookup_insn): Update.
1433 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1434 (dis_hash_table_entries): New variable.
1435 (cgen_dis_init): Free dis_hash_table_entries.
1436 (hash_insn_array,hash_insn_list): New functions.
1437 (build_dis_hash_table): Use them. Hash macro insns as well.
1438 (cgen_dis_lookup_insn): Update.
1439 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1440 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1441 (cgen_macro_insn_count): New function.
1442 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1444 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1446 * i386-dis.c (OP_DSSI): Print segment override.
1448 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1450 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1453 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1455 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1456 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1457 * configure.in: Define and substitute WIN32LDFLAGS and
1459 * aclocal.m4: Rebuild with new libtool.
1460 * configure, Makefile.in: Rebuild.
1462 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1464 * m32r-opc.c: Regenerate.
1466 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1468 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1469 before trying to copy it.
1470 * Makefile.in: Rebuild.
1472 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1474 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1476 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1478 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1479 from an arbitrary valid buffer instead of fetching them on demand
1481 (invalid_float): use bit_extract_simple() instead of bit_extract().
1483 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1485 From H.J. Lu <hjl@gnu.org>:
1486 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1489 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1491 * Branched binutils 2.9.
1493 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1495 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1496 disassembling last 4 bytes of a section.
1498 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1500 Fix some gcc -Wall warnings:
1501 * arc-dis.c (print_insn): Add casts to avoid warnings.
1502 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1503 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1504 * m10200-dis.c (disassemble): Likewise.
1505 * m10300-dis.c (disassemble): Likewise.
1506 * ns32k-dis.c (print_insn_ns32k): Likewise.
1507 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1508 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1509 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1510 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1511 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1512 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1513 * tic80-dis.c (print_one_instruction): Likewise.
1514 * w65-dis.c (print_operand): Likewise.
1515 * z8k-dis.c (fetch_data): Likewise.
1516 * a29k-dis.c: Add return type for find_byte_func_type.
1517 * arc-opc.c: Include <stdio.h>. Remove declarations of
1518 insert_multshift and extract_multshift.
1519 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1521 (extract_value): Fully parenthesize expression.
1522 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1523 * h8500-opc.h (h8500_table): Fully bracket initializer.
1524 * w65-opc.h (optable): Likewise.
1525 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1526 * i386-dis.c (OP_E): Initialize local variables.
1527 * m10200-dis.c (print_insn_mn10200): Likewise.
1528 * mips-dis.c (print_insn_mips16): Likewise.
1529 * sh-dis.c (print_insn_shx): Likewise.
1530 * v850-dis.c (print_insn_v850): Likewise.
1531 * ns32k-dis.c (print_insn_arg): Declare.
1532 (get_displacement, invalid_float): Declare.
1533 (list_search, sign_extend, flip_bytes): Declare return type.
1534 (get_displacement): Likewise.
1535 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1537 (print_insn_ns32k): Make i unsigned.
1538 (invalid_float): Make static. Declare type of val.
1539 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1540 on each for iteration.
1541 * tic30-dis.c (get_indirect_operand): Likewise.
1542 * z8k-dis.c (print_insn_z8001): Declare return type.
1543 (print_insn_z8002): Likewise.
1544 (unparse_instr): Fix sprintf format strings.
1546 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1548 * mips-opc.c: Add "sync.l" and "sync.p".
1550 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1552 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1553 default m68k variant to recognize.
1555 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1556 (ctrl, cobr, mem, ea): Likewise.
1557 (print_addr): Likewise. Remove cast.
1558 (ea): Cast argument of print_addr to bfd_vma.
1560 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1562 (cgen_parse_unsigned_integer): Likewise.
1563 (cgen_parse_address): Likewise.
1565 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1567 * i960-dis.c (ctrl): Add full braces to structure initialization.
1568 (cobr, mem, reg): Likewise.
1569 (ea): Correct parenthesization in expression.
1571 * cgen-asm.c: Include <ctype.h>.
1572 (build_asm_hash_table): Remove unused local variable i.
1573 (cgen_parse_keyword): Add casts to avoid warnings.
1575 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1576 symbol. Fix indentation.
1577 (print_insn_little_arm): Likewise.
1579 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1581 * configure.in: Use AM_DISABLE_SHARED.
1582 * aclocal.m4, configure: Rebuild with libtool 1.2.
1584 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1586 These patches are courtesy of Jonathan Walton and Tony Thompson
1587 (athompso@cambridge.arm.com).
1589 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1592 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1593 both the offset and the label closest to the destination.
1595 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1597 * m32r-opc.h: Regenerate.
1599 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1601 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1603 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1605 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1606 assume that info->symbols is non-empty.
1608 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1610 * alpha-opc.c (cvtqs) There is no such thing.
1611 (cvttq): Missing most of the /*d variants.
1613 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1615 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1616 delayed branches or jumps.
1618 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1620 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1622 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1623 * tic30-dis.c (print_branch): Likewise.
1625 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1627 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1628 saved_symbol code as it is no longer needed.
1630 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1632 * cgen-asm.c: Include symcat.h.
1633 * cgen-dis.c,cgen-opc.c: Ditto.
1634 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1636 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1638 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1640 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1642 * m32r-opc.[ch]: Regenerate.
1644 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1646 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1647 arguments. Don't perform validation here.
1648 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1650 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1652 * m32r-opc.c: Regenerate.
1654 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1656 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1657 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1659 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1661 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1663 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1665 * configure.in: Get the version number from BFD.
1666 * configure: Rebuild.
1668 From H.J. Lu <hjl@gnu.org>:
1669 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1670 * Makefile.in: Rebuild.
1672 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1674 * m32r-opc.c: Regenerate.
1675 * m32r-opc.h: Regenerate.
1677 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1679 * m32r-opc.c: Regenerate.
1681 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1683 Fix rac to accept only a0:
1684 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1685 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1686 Introduce OPERAND_GPR.
1687 * d10v-dis.c (print_operand): Likewise.
1689 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1691 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1692 (cgen_hw_lookup): Make result const.
1693 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1695 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1697 * configure, aclocal.m4: Rebuild with new libtool.
1699 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1701 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1702 instructions use a PC relative branch, not absolute.
1704 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1706 * configure.in: Set libtool_enable_shared rather than
1707 libtool_shared. Remove diversion hack.
1708 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1710 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1712 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1713 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1715 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1717 * tic30-dis.c: New file.
1718 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1719 * configure.in: Handle bfd_tic30_arch.
1720 * Makefile.am: Rebuild dependencies.
1721 (CFILES): Add tic30-dis.c
1722 (ALL_MACHINES): Add tic30-dis.lo.
1723 * configure, Makefile.in: Rebuild.
1725 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1727 * m32r-opc.h (HAVE_CPU_M32R): Define.
1729 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1731 * v850-opc.c (insertion routines): If both alignment and size is
1732 wrong then report this.
1734 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1736 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1737 Only recognize instructions for the current target_processor.
1739 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1741 * d10v-dis.c (PC_MASK): Correct value.
1742 (print_operand): If there's a reloc, don't calculate the
1743 address because they could be in different sections.
1745 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1747 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1748 instruction after the 4650's "mul" instruction; nobody's using the
1749 4010 these days. If object files someday indicate which processor
1750 variant they're intended for, we can do a better job at this.
1752 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1754 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1755 table provided entry size. Use CGEN_INSN_MNEMONIC.
1756 (cgen_parse_keyword): Rewrite.
1757 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1758 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1759 * cgen-opc.c: Clean up pass over `struct foo' usage.
1760 (cgen_keyword_lookup_value): Handle "" entry.
1761 (cgen_keyword_add): Likewise.
1763 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1765 * mips-opc.c: Add FP_D to s.d instruction flags.
1767 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1769 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1771 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1773 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1774 PC relative offset forms before the 15 bit forms. An assembler command
1775 line option now chooses the default.
1777 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1779 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1780 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1782 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1784 * configure: Only build libopcodes shared if --enable-shared's value
1785 was `yes', or was set to `*opcodes*'.
1786 * aclocal.m4: Likewise.
1787 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1788 original source of this bit of code. It's not clear what the best fix
1791 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1793 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1794 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1795 offset forms before the 15 bit forms, to default to the long forms.
1797 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1799 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1801 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1803 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1804 symbol if none is present.
1805 (print_insn_big_arm): Prevent examination of stored symbol if
1808 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1810 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1812 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1814 * disassemble.c: Remove disasm_symaddr() function.
1816 * arm-dis.c: Use info->symbol instead of info->flags to determine
1817 if disassmbly should be in Thumb or Arm mode.
1819 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1821 * arm-dis.c: Add support for disassembling Thumb opcodes.
1822 (print_insn_thumb): New function.
1824 * disassemble.c (disasm_symaddr): New function.
1826 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1827 (thumb_opcodes): Table of Thumb opcodes.
1829 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1831 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1833 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1834 and 'v' as operand types.
1836 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1838 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1839 <olivier.carmona@di.epfl.ch>.
1840 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1841 which has a two word opcode with a one word argument.
1843 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1845 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1846 unsigned, not signed.
1847 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1849 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1851 * d10v-dis.c (print_operand):
1852 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1854 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1856 * d10v-opc.c (OPERAND_FLAG): Split into:
1857 (OPERAND_FFLAG, OPERAND_CFLAG) .
1861 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1863 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1864 field for all INSN_MACRO's.
1865 * mips16-opc.c: same
1867 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1869 * mips-opc.c (sync,cache): These are 3900 insns.
1871 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1873 sh-opc.h (sh_table): Remove ftst/nan.
1875 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1877 * mips-opc.c (ffc, ffs): Fix mask.
1879 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1881 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1884 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1886 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1887 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1889 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1891 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1892 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1894 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1896 * v850-dis.c (disassemble): Replace // with /* ... */
1898 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1900 * sparc-opc.c: Add wr & rd for v9a asr's.
1901 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1902 (v9a_asr_reg_names): New variable.
1903 Patch from David Miller <davem@vger.rutgers.edu>.
1905 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1907 * sparc-opc.c (v9notv9a): New insn type.
1908 (IMPDEP): Move to the end to not conflict with edge8 et al.
1909 Patch from David Miller <davem@vger.rutgers.edu>.
1911 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1913 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1915 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1917 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1919 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1921 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1922 of disassemble_info structure to determine if an overlay address
1923 has a matching symbol in low memory.
1925 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1926 new symbol_at_address_func field in disassemble_info structure.
1928 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1930 * v850-opc.c (extract_d22): Use signed arithmatic.
1932 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1934 * mips-opc.c: Three op mult is not an ISA insn.
1936 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1938 * mips-opc.c: Fix formatting.
1940 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1942 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1943 than assuming that char is signed. Explicitly sign extend 16 bit
1944 values, rather than assuming that short is 16 bits.
1945 (OP_sI, OP_J, OP_DIR): Likewise.
1947 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1949 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1952 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1954 * v850-opc.c: Fix typo in comment.
1956 * v850-dis.c (disassemble): Add test of processor type when
1957 determining opcodes.
1959 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1961 * configure.in: Use a diversion to set enable_shared before the
1962 arguments are parsed.
1963 * configure: Rebuild.
1965 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1967 * m68k-opc.c (TBL1): Use ! rather than `.
1968 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1970 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1972 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1974 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1976 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1979 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1980 * aclocal.m4: Rebuild with new libtool.
1981 * configure: Rebuild.
1983 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1985 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1987 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1989 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1991 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1993 * v850-opc.c (v850_opcodes): Further rearrangements.
1995 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1997 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1999 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2001 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2004 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2006 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2008 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2010 * v850-opc.c: Initialise processors field of v850_opcode structure.
2012 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2014 Merge changes from Martin Hunt:
2016 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2018 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2019 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2020 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2022 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2024 * d30v-dis.c (print_insn): First operand of d*i (delayed
2025 branch) instructions is relative.
2027 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2028 (d30v_operand_table): Add IMM6S3 type.
2029 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2031 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2032 and cmp instructions.
2034 * d30v-opc.c: Correct entries for repeat*, and sat*.
2035 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2036 types. Correct several formats.
2038 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2040 * d30v-opc.c (pre_defined_registers): Change control registers.
2042 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2043 SHORT_C2. Manual was incorrect.
2045 * d30v-dis.c (lookup_opcode): Return value now indicates
2046 if an opcode has a short and a long form. Used for deciding
2047 to append a ".s" or ".l".
2048 (print_insn): Append a ".s" to an instruction if it is
2049 the short form and ".l" if it is a long form. Do not append
2050 anything if the instruction has only one possible size.
2052 * d30v-opc.c: Change mulx2h to require an even register.
2053 New form: SHORT_A2; a SHORT_A form that needs an even
2054 register as the first operand.
2056 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2057 instruction was not being disassembled if there were an odd
2058 number of instructions.
2060 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2062 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2064 * v850-dis.c (disassemble): Improved display of register lists.
2066 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2068 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2069 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2070 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2071 fandnot1s, fandnot2s.
2073 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2075 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2077 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2079 * cgen-asm.c (cgen_parse_address): New argument resultp.
2080 All callers updated.
2081 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2083 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2085 * mn10200-dis.c (disassemble): PC relative instructions are
2086 relative to the next instruction, not the current instruction.
2088 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2090 * v850-dis.c (disassemble): Only signed extend values that are not
2091 returned by extract functions.
2092 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2094 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2096 * v850-opc.c: Update comments. Remove use of
2097 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2099 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2101 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2103 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2105 * configure: Rebuilt with latest devo autoconf for NT support.
2107 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2109 * v850-dis.c (disassemble): Use curly brace syntax for register
2112 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2113 where r0 is being used as a destination register.
2115 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2117 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2119 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2121 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2123 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2125 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2126 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2129 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2131 * configure (cgen_files): Add support for v850e target.
2132 * configure.in (cgen_files): Add support for v850e target.
2134 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2136 * configure (cgen_files): Add support for v850ea target.
2137 * configure.in (cgen_files): Add support for v850ea target.
2139 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2141 * configure.in (bfd_arc_arch): Add.
2142 * configure: Rebuild.
2143 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2144 * Makefile.in: Rebuild.
2145 * arc-dis.c, arc-opc.c: New files.
2146 * disassemble.c (ARCH_all): Define ARCH_arc.
2147 (disassembler): Add ARC support.
2149 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2151 * v850-dis.c (disassemble): Add support for v850EA instructions.
2153 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2154 (v850_opcodes): Add v850EA instructions.
2156 * v850-dis.c (disassemble): Add support for v850E instructions.
2158 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2159 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2160 insert_spe, extract_spe): New Functions.
2161 (v850_opcodes): Add v850E instructions.
2163 * v850-opc.c: Reorganised and re-layed out to improve readability
2166 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2168 * configure: Rebuild with autoconf 2.12.1.
2170 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2172 * aclocal.m4, configure: Rebuild with new automake patches.
2174 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2176 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2177 * acinclude.m4: Just include acinclude.m4 from BFD.
2178 * aclocal.m4, configure: Rebuild.
2180 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2182 * Makefile.am: New file, based on old Makefile.in.
2183 * acconfig.h: New file.
2184 * acinclude.m4: New file.
2185 * stamp-h.in: New file.
2186 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2187 Removed shared library handling; now handled by libtool. Replace
2188 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2189 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2190 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2191 handling in AC_OUTPUT.
2192 * dep-in.sed: Change .o to .lo.
2193 * Makefile.in: Now built with automake.
2194 * aclocal.m4: Now built with aclocal.
2195 * config.in, configure: Rebuild.
2197 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2199 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2201 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2203 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2205 * sparc-dis.c (sorted_opcodes): New static local.
2206 (struct opcode_hash): `opcode' is pointer to const element.
2207 (build_hash): First arg is now table of sorted pointers.
2208 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2209 (compare_opcodes): Update.
2211 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2213 * cgen-opc.c: #include <ctype.h>.
2214 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2215 Handle case insensitive hashing.
2216 (hash_keyword_value): Change type of `value' to unsigned int.
2218 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2220 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2221 precision FP, mark it as such. Likewise for double precision
2222 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2225 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2227 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2229 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2230 nesting depth when all the macros are expanded.
2232 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2234 * sparc-opc.c: The fcmp v9a instructions take an integer register
2235 as a destination, not a floating point register. From Christian
2236 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2238 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2240 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2241 syntax. From Roman Hodek
2242 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2244 * i386-dis.c (twobyte_has_modrm): Fix pand.
2246 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2248 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2250 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2252 * arm-dis.c: Add prototypes for arm_decode_shift and
2255 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2257 * mips-opc.c: Add r3900 insns.
2259 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2261 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2262 print delay slot instructions on the same line. When using a PC
2263 relative load, add a comment with the value being loaded if it can
2266 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2268 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2269 to pushS/popS for segment regs and byte constant so that
2270 pushw/popw printed when in 16 bit data mode.
2272 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2273 print cbtw, cwtd in 16 bit data mode.
2274 * i386-dis.c (putop): extra case W to support above.
2276 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2277 address size prefix in 16 bit address mode.
2279 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2281 * sh-dis.c: Reindent. Rename local variable fprintf to
2284 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2286 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2288 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2290 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2292 * mips16-opc.c (mip16_opcodes): same.
2294 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2296 * m68k-opc.c (moveb): Change $d to %d.
2298 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2300 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2301 (twobyte_has_modrm): Likewise.
2303 (OP_MMX, OP_EM, OP_MS): New static functions.
2305 * i386-dis.c: Revert patch of April 4. The output now matches
2308 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2310 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2313 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2315 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2317 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2319 * Makefile.in (install): Depend upon installdirs.
2320 (installdirs): New target.
2322 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2324 From Thomas Graichen <graichen@rzpd.de>:
2325 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2326 * configure: Rebuild.
2328 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2330 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2331 Delete string{,s}.h support.
2333 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2335 * cgen-asm.c (cgen_parse_operand_fn): New global.
2336 (cgen_parse_{{,un}signed_integer,address}): Update call to
2337 cgen_parse_operand_fn.
2338 (cgen_init_parse_operand): New function.
2339 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2340 from cgen_asm_init_parse.
2341 (m32r_cgen_assemble_insn): New operand `errmsg'.
2342 Delete call to as_bad, return error message to caller.
2343 (m32r_cgen_asm_hash_keywords): #if 0 out.
2345 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2347 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2349 [case 'J']: Fix typo in register name.
2351 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2353 * configure.in: Substitute SHLIB_LIBS.
2354 * configure: Rebuild.
2355 * Makefile.in (SHLIB_LIBS): New variable.
2356 ($(SHLIB)): Use $(SHLIB_LIBS).
2358 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2360 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2362 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2364 * disassemble.c (disassembler): Handle m32r.
2366 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2368 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2369 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2370 * Makefile.in (CFILES): Add them.
2371 (ALL_MACHINES): Add them.
2372 (dependencies): Regenerate.
2373 * configure.in (cgen_files): New variable.
2374 (bfd_m32r_arch): Add entry.
2375 * configure: Regenerate.
2377 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2379 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2380 * configure: Rebuild.
2382 * Makefile.in: Rebuild dependencies.
2384 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2386 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2389 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2391 * Branched binutils 2.8.
2393 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2395 * m10200-dis.c: Rename from mn10200-dis.c.
2396 * m10200-opc.c: Rename from mn10200-opc.c.
2397 * m10300-dis.c: Rename from mn10300-dis.c
2398 * m10300-opc.c: Rename from mn10300-opc.c.
2399 * Makefile.in: Update accordingly.
2401 * mips16-opc.c: Add mul and dmul macros.
2403 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2405 * makefile.vms: Update CFLAGS, add clean target.
2407 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2409 * mips-opc.c: Add "wait". From Ralf Baechle
2410 <ralf@gnu.ai.mit.edu>.
2412 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2413 * configure, config.in: Rebuild.
2414 * sysdep.h: Include <stdlib.h> if it exists.
2415 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2417 * Makefile.in: Rebuild dependencies.
2419 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2421 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2422 Andrew Bray <andy@madhouse.demon.co.uk>.
2424 * mips-opc.c: Add cast when setting mips_opcodes.
2426 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2428 * v850-dis.c (disassemble): Fix sign extension problem.
2429 * v850-opc.c (extract_d*): Fix sign extension problems to make
2430 disassembly calculate branch offsets correctly.
2432 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2434 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2436 * mips-opc.c: Add dctr and dctw.
2438 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2440 * d30v-dis.c (print_insn): Change the way signed constants
2443 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2445 * Makefile.in (BFD_H): New variable.
2446 (HFILES): New variable.
2447 (CFILES): Add all C files.
2448 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2449 Delete old dependencies, and build new ones.
2450 * dep-in.sed: New file.
2452 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2454 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2456 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2458 * mn10200-opc.c: Change "trap" to "syscall".
2459 * mn10300-opc.c: Add new "syscall" instruction.
2461 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2463 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2464 mulul insns on the coldfire.
2466 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2468 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2469 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2470 (print_insn_little_arm): Likewise.
2472 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2474 Based on patches from H.J. Lu <hjl@lucon.org>:
2475 * i386-dis.c (fetch_data): Add prototype.
2476 * m68k-dis.c (fetch_data): Add prototype.
2477 (dummy_print_address): Add prototype. Make static.
2478 * ppc-opc.c (valid_bo): Add prototype.
2479 * sparc-dis.c (build_hash_table): Add prototype.
2480 (is_delayed_branch, compute_arch_mask): Add prototypes.
2481 (print_insn_sparc): Make several local variables const.
2482 (compare_opcodes): Change arguments to const PTR. Add prototype.
2483 * sparc-opc.c (arg): Change name field to be const.
2484 (lookup_name, lookup_value): Add prototypes. Change table and
2485 name parameters to be const.
2486 (sparc_encode_asi): Change name parameter to be const.
2487 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2488 (sparc_encode_sparclet_cpreg): Likewise.
2489 (sparc_decode_asi): Change return type to be const.
2490 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2491 (sparc_decode_sparclet_cpreg): Likewise.
2493 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2495 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2496 Solaris doesn't like the combined options, and the -f is
2498 (stamp-tshlink, install): Likewise.
2500 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2502 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2505 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2507 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2509 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2511 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2514 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2516 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2518 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2520 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2522 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2524 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2526 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2528 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2529 floatformat_to_double to make portable.
2530 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2533 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2535 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2536 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2538 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2540 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2541 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2543 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2545 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2546 (OFF_SL_BR_SCALED): ... to this, and added the flag
2547 TIC80_OPERAND_BASEREL to the flags word.
2548 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2551 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2553 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2554 Change mips_opcodes from const array to a pointer,
2555 and change bfd_mips_num_opcodes from const int to int,
2556 so that we can increase the size of the mips opcodes table
2559 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2561 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2562 store BITNUM values in the table in one's complement form
2563 to match behavior when assembler is given a raw numeric
2564 value for a BITNUM operand.
2565 * tic80-dis.c (print_operand_bitnum): Ditto.
2567 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2569 * d30v-opc.c: Removed references to FLAG_X.
2571 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2573 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2575 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2577 * Makefile.in: Added d30v object files.
2578 * configure: (bfd_d30v_arch) Rebuilt.
2579 * configure.in: (bfd_d30v_arch) Added new case.
2580 * d30v-dis.c: New file.
2581 * d30v-opc.c: New file.
2582 * disassemble.c (disassembler) Add entry for d30v.
2584 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2586 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2587 representations for the floating point BITNUM values.
2589 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2591 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2592 in the table in one's complement form, as they appear in the
2594 (tic80_symbol_to_value): Use macros to access predefined
2596 (tic80_value_to_symbol): Ditto.
2597 (tic80_next_predefined_symbol): New function.
2598 * tic80-dis.c (print_operand_bitnum): Remove code that did
2599 one's complement for BITNUM values.
2601 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2603 * makefile.vms: Remove 8 bit characters. Update to latest
2606 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2608 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2610 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2612 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2613 (IMM24_PCREL): Likewise.
2615 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2617 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2618 address for an extended PC relative instruction that is not a
2621 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2623 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2626 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2628 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2629 (tic80_opcodes): Sort entries so that long immediate forms
2630 come after short immediate forms, making it easier for
2631 assembler to select the right one for a given operand.
2633 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2635 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2637 (print_insn_mips16): Likewise.
2639 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2641 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2642 a symbol class that restricts translation to just that
2643 class (general register, condition code, etc).
2645 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2647 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2648 and REG_DEST_E for register operands that have to be
2649 an even numbered register. Add REG_FPA for operands that
2650 are one of the floating point accumulator registers.
2651 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2652 (tic80_opcodes): Change entries that need even numbered
2653 register operands to use the new operand table entries.
2654 Add "or" entries that are identical to "or.tt" entries.
2656 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2658 * mips16-opc.c: Add new cases of exit instruction for
2660 * mips-dis.c (print_mips16_insn_arg): Display floating point
2661 registers in operands of exit instruction. Print `$' before
2662 register names in operands of entry and exit instructions.
2664 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2666 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2667 pairs for all predefined symbols recognized by the assembler.
2668 Also used by the disassembling routines.
2669 (tic80_symbol_to_value): New function.
2670 (tic80_value_to_symbol): New function.
2671 * tic80-dis.c (print_operand_control_register,
2672 print_operand_condition_code, print_operand_bitnum):
2673 Remove private tables and use tic80_value_to_symbol function.
2675 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2677 * d10v-dis.c (print_operand): Change address printing
2678 to correctly handle PC wrapping. Fixes PR11490.
2680 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2682 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2685 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2687 * mips-dis.c (print_insn_mips16): Set insn_info information.
2688 (print_mips16_insn_arg): Likewise.
2690 * mips-dis.c (print_insn_mips16): Better handling of an extend
2691 opcode followed by an instruction which can not be extended.
2693 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2695 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2696 coldfire moveb instruction to not allow an address register as
2697 destination. Although the documentation does not indicate that
2698 this is invalid, experiments uncovered unexpected behavior.
2699 Added a comment explaining the situation. Thanks to Andreas
2700 Schwab for pointing this out to me.
2702 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2704 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2705 entries are presorted so that entries with the same mnemonic are
2706 adjacent to each other in the table. Sort the entries for each
2707 instruction so that this is true.
2709 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2711 * m68k-dis.c: Include <libiberty.h>.
2712 (print_insn_m68k): Sort the opcode table on the most significant
2713 nibble of the opcode.
2715 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2717 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2718 "vsub", "vst", "xnor", and "xor" instructions.
2719 (V_a1): Renamed from V_a, msb of accumulator reg number.
2720 (V_a0): Add macro, lsb of accumulator reg number.
2722 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2724 * tic80-dis.c (print_insn_tic80): Broke excessively long
2725 function up into several smaller ones and arranged for
2726 the instruction printing function to be callable recursively
2727 to print vector instructions that have both a load and a
2728 math instruction packed into a single opcode.
2729 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2730 to explain why it comes after the other vector opcodes.
2732 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2734 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2735 move insns to handle immediate operands.
2737 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2739 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2740 fix operand mask in the "moveml" entries for the coldfire.
2742 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2744 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2745 New macros for building vector instruction opcodes.
2746 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2747 FMT_LI, which were unused. The field is now a flags field.
2748 Remove some opcodes that are possible, but illegal, such
2749 as long immediate instructions with doubles for immediate
2750 values. Add "vadd" and "vld" instructions.
2752 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2754 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2755 the order more logical. Move the shift alias instructions ("rotl",
2756 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2757 interspersed with the regular sr.x and sl.x instructions. Add
2758 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2759 "sub", "subu", "swcr", and "trap".
2761 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2763 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2764 (OFF_SL_PC): Renamed from OFF_SL.
2765 (OFF_SS_BR): New operand type for base relative operand.
2766 (OFF_SL_BR): New operand type for base relative operand.
2767 (REG_BASE): New operand type for base register operand.
2768 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2769 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2770 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2772 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2773 10 char field, padded with spaces on rhs, rather than a string
2774 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2775 than old TIC80_OPERAND_RELATIVE. Add support for new
2776 TIC80_OPERAND_BASEREL flag bit.
2778 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2780 * tic80-dis.c (print_insn_tic80): Print floating point operands
2782 * tic80-opc.c (SPFI): Add single precision floating point
2783 immediate operand type.
2784 (ROTATE): Add rotate operand type for shifts.
2785 (ENDMASK): Add for shifts.
2786 (n): Macro for the 'n' bit.
2787 (i): Macro for the 'i' bit.
2788 (PD): Macro for the 'PD' field.
2789 (P2): Macro for the 'P2' field.
2790 (P1): Macro for the 'P1' field.
2791 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2794 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2796 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2797 adding in current address for pc-relative operands.
2799 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2801 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2802 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2803 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2804 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2805 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2806 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2807 (REG_SCALED, LSI_SCALED): New operand types.
2808 (E): New macro for 'E' bit at bit 27.
2809 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2810 opcodes, including the various size flavors (b,h,w,d) for
2811 the direct load and store instructions.
2813 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2815 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2817 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2818 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2819 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2820 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2821 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2822 masks with "MASK_* & ~M_*" to get the M bit reset.
2823 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2825 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2827 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2828 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2829 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2831 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2832 CC, SICR, and LICR table entries.
2833 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2834 "bcnd", and "brcr" opcodes.
2836 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2838 * ppc-opc.c (powerpc_operands): Make comment match the
2839 actual fields (no shift field).
2840 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2841 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2842 partial implementation, work in progress.
2843 * tic80-opc.c (tic80_operands): Begin construction operands table.
2844 (tic80_opcodes): Continue populating opcodes table and start
2845 filling in the operand indices.
2846 (tic80_num_opcodes): Add this.
2848 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2850 * m68k-opc.c: Add #B case for moveq.
2852 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2854 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2855 before they are used.
2857 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2859 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2860 for "breakpoint" instruction.
2862 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2864 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2865 (dep): Use ALL_CFLAGS rather than CFLAGS.
2867 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2869 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2872 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2874 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2875 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2877 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2879 * mips16-opc.c: Add "abs".
2881 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2883 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2884 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2885 (disassembler): Add bfd_arch_tic80 support to set disassemble
2886 to print_insn_tic80.
2887 * tic80-dis.c (print_insn_tic80): Add stub.
2889 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2891 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2892 * configure: Regenerate with autoconf.
2893 * tic80-dis.c: Add file.
2894 * tic80-opc.c: Add file.
2896 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2898 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2900 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2902 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2903 (mn10200_opcodes): Use it for some logicals and btst insns.
2904 Add "break" and "trap" instructions.
2906 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2908 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2910 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2912 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2913 relative load or add now depends upon whether the instruction is
2916 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2918 * mn10200-dis.c: Finish writing disassembler.
2919 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2920 Fix mask for "jmp (an)".
2922 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2923 handle endianness issues for mn10300.
2925 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2927 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2929 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2930 instruction. Fix opcode field for "movb (imm24),dn".
2932 * mn10200-opc.c (mn10200_operands): Fix insertion position
2935 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2937 * mn10200-opc.c: Create mn10200 opcode table.
2938 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2939 but moving along nicely.
2941 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2943 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2945 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2947 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2948 specifiers for fmovem* instructions.
2950 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2952 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2954 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2956 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2959 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2961 * mn10300-opc.c: Add some comments explaining the various
2964 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2966 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2968 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2971 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2972 operand specifiers in fmovm* instructions.
2974 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2976 * ppc-opc.c (insert_li): Give an error if the offset has the two
2977 least significant bits set.
2979 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2981 * mips-dis.c (print_insn_mips16): Separate the instruction from
2982 the arguments with a tab, not a space.
2984 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2986 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2989 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2992 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2994 * configure: Rebuild with autoconf 2.12.
2996 Add support for mips16 (16 bit MIPS implementation):
2997 * mips16-opc.c: New file.
2998 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2999 (mips16_reg_names): New static array.
3000 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3001 after seeing a 16 bit symbol.
3002 (print_insn_little_mips): Likewise.
3003 (print_insn_mips16): New static function.
3004 (print_mips16_insn_arg): New static function.
3005 * mips-opc.c: Add jalx instruction.
3006 * Makefile.in (mips16-opc.o): New target.
3007 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3008 * configure: Rebuild.
3010 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3012 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3013 operand specifiers in *save, *restore and movem* instructions.
3015 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3018 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3019 register operands for immediate arithmetic, not, neg, negx, and
3020 set according to condition instructions.
3022 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3023 specifier of the effective-address operand in immediate forms of
3024 arithmetic instructions. The specifier for the immediate operand
3025 notes how and where the constant will be stored.
3027 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3029 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3032 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3035 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3037 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3039 * mn10300-dis.c (disassemble): Handle register lists.
3041 * mn10300-opc.c: Fix handling of register list operand for
3042 "call", "ret", and "rets" instructions.
3044 * mn10300-dis.c (disassemble): Print PC-relative and memory
3045 addresses symbolically if possible.
3046 * mn10300-opc.c: Distinguish between absolute memory addresses,
3047 pc-relative offsets & random immediates.
3049 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3051 (disassemble): Handle SPLIT and EXTENDED operands.
3053 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3055 * mn10300-dis.c: Rough cut at printing some operands.
3057 * mn10300-dis.c: Start working on disassembler support.
3058 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3060 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3062 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3064 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3066 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3068 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3070 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3071 register argument is calls and jmp instructions.
3073 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3075 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3076 getx operand. Fix opcode for mulqu imm,dn.
3078 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3080 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3081 in MN10300_OPERAND_SPLIT operands for how many bits
3082 appear in the basic insn word. Add IMM32_HIGH24,
3083 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3084 (mn10300_opcodes): Use new operands as needed.
3086 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3087 for bset, bclr, btst instructions.
3088 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3090 * mn10300-opc.c (mn10300_operands): Remove many redundant
3091 operands. Update opcode table as appropriate.
3092 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3093 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3095 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3097 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3098 operands (for indexed load/stores). Fix bitpos for DI
3099 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3100 few instructions that insert immediates/displacements in the
3101 middle of the instruction. Add IMM8E for 8 bit immediate in
3102 the extended part of an instruction.
3103 (mn10300_operands): Use new opcodes as appropriate.
3105 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3107 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3108 sequential so the assembler never parallelizes it with
3111 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3113 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3114 a data/address register that appears in register field 0
3115 and register field 1.
3116 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3118 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3120 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3121 standard disassembly.
3123 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3124 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3125 Recategorize PALcode instructions.
3127 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3129 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3131 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3133 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3134 there are no operand types.
3136 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3138 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3140 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3142 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3144 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3146 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3148 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3149 and sst.w instructions.
3151 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3154 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3156 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3159 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3161 * ppc-opc.c (PPCPWR2): Define.
3162 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3165 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3167 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3168 field for movhu instruction.
3170 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3171 cast value to "long" not "signed long" to keep hpux10
3174 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3176 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3179 * mn10300-opc.c (FMT*): Remove definitions.
3181 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3182 for shift-by-register opcodes.
3184 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3185 into [AD][MN][01] for encoding the position of the register
3188 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3190 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3191 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3193 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3195 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3196 Fix various typos. Add "PAREN" operand.
3197 (MEM, MEM2): Define.
3198 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3199 operands. Fix several typos.
3201 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3204 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3206 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3207 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3209 (mn10300_opcodes): Break opcode format out into its own field.
3210 Update many operand fields to deal with signed vs unsigned
3211 issues. Fix one or two typos in the "mov" instruction
3212 opcode, mask and/or operand fields.
3214 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3216 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3217 m68851 wasn't reset.
3219 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3221 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3222 all opcodes. Very rough cut at operands for all opcodes.
3224 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3227 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3229 * mn10200-opc.c, mn10300-opc.c: New files.
3230 * mn10200-dis.c, mn10300-dis.c: New files.
3231 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3232 * disassemble.c: Break mn10x00 support into 10200 and 10300
3234 * configure.in: Likewise.
3235 * configure: Rebuilt.
3237 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3239 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3241 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3243 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3245 * disassemble (ARCH_mn10x00): Define.
3246 (disassembler): Handle bfd_arch_mn10x00.
3247 * configure.in: Recognize bfd_mn10x00_arch.
3248 * configure: Rebuilt.
3250 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3252 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3253 accordingly. Don't declare functions using op_rtn.
3255 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3257 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3258 params to be more standard.
3259 * (disassemble): Print absolute addresses and symbolic names for
3260 branch and jump targets.
3261 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3263 * (v850_opcodes): Add breakpoint insn.
3265 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3267 * m68k-opc.c: Move the fmovemx data register cases before the
3268 other cases, so that they get recognized before the data register
3269 does gets treated as a degenerate register list.
3271 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3273 * mips-opc.c: Add a case for "div" and "divu" with two registers
3274 and a destination of $0.
3276 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3278 * mips-dis.c (print_insn_arg): Add prototype.
3279 (_print_insn_mips): Ditto.
3281 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3283 * mips-dis.c (print_insn_arg): Print condition code registers as
3286 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3288 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3290 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3292 * v850-dis.c (disassemble): Make static. Provide prototype.
3294 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3296 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3299 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3301 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3302 ']' characters into the output stream.
3303 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3304 Add "memop" field to all opcodes (for the disassembler).
3305 Reorder opcodes so that "nop" comes before "mov" and "jr"
3306 comes before "jarl".
3308 * v850-dis.c (print_insn_v850): Fix typo in last change.
3310 * v850-dis.c (print_insn_v850): Properly handle disassembling
3311 a two byte insn at the end of a memory region when the memory
3312 region's size is only two byte aligned.
3314 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3316 * v850-dis.c (v850_reg_names): Define.
3317 (v850_sreg_names, v850_cc_names): Likewise.
3318 (disassemble): Very rough cut at printing operands (unformatted).
3320 * v850-opc.c (BOP_MASK): Fix.
3321 (v850_opcodes): Fix mask for jarl and jr.
3323 * v850-dis.c: New file. Skeleton for disassembler support.
3324 * Makefile.in Remove v850 references, they're not needed here.
3325 * configure.in: Add v850-dis.o when building v850 toolchains.
3326 * configure: Rebuilt.
3327 * disassemble.c (disassembler): Call v850 disassembler.
3329 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3330 (insert_d8_6, extract_d8_6): New functions.
3331 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3332 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3334 (IF4A, IF4B): Use "D7" instead of "D7S".
3335 (IF4C, IF4D): Use "D8_7" instead of "D8".
3336 (IF4E, IF4F): New. Use "D8_6".
3337 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3338 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3340 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3341 (v850_operands): Change D16 to D16_15, use special insert/extract
3342 routines. New new D16 that uses the generic insert/extract code.
3343 (IF7A, IF7B): Use D16_15.
3344 (IF7C, IF7D): New. Use D16.
3345 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3347 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3348 message. Issue an error if the branch offset is odd.
3350 * v850-opc.c: Add notes about needing special insert/extract
3351 for all the load/store insns, except "ld.b" and "st.b".
3353 * v850-opc.c (insert_d22, extract_d22): New functions.
3354 (v850_operands): Use insert_d22 and extract_d22 for
3356 (insert_d9): Fix range check.
3358 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3360 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3361 and set bits field to D9 and D22 operands.
3363 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3365 * v850-opc.c (v850_operands): Define SR2 operand.
3366 (v850_opcodes): "ldsr" uses R1,SR2.
3368 * v850-opc.c (v850_opcodes): Fix opcode specs for
3369 sld.w, sst.b, sst.h, sst.w, and nop.
3371 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3373 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3374 end of the opcode table.
3376 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3378 * d10v-opc.c (pre_defined_registers): Added register pairs,
3379 "r0-r1", "r2-r3", etc.
3381 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3383 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3384 Create I16U for an unsigned 16bit mmediate operand.
3385 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3387 * v850-opc.c (v850_operands): Define EP operand.
3388 (IF4A, IF4B, IF4C, IF4D): Use EP.
3390 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3391 with immediate operand, "movhi". Tweak "ldsr".
3393 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3394 correct. Get sld.[bhw] and sst.[bhw] closer.
3396 * v850-opc.c (v850_operands): "not" is a two byte insn
3398 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3400 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3402 * v850-opc.c (two): Get order of words correct.
3404 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3406 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3407 register source and destination operands.
3408 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3410 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3411 same thinko in "trap" opcode.
3413 * v850-opc.c (v850_opcodes): Add initializer for size field
3416 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3417 Add D8 for 8-bit unsigned field in short load/store insns.
3418 (IF4A, IF4D): These both need two registers.
3419 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3420 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3421 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3422 for "ldsr" and "stsr".
3423 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3426 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3427 short store word (sst.w).
3429 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3431 * v850-opc.c (v850_operands): Added insert and extract fields,
3432 pointers to functions that handle unusual operand encodings.
3434 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3436 * v850-opc.c (v850_opcodes): Enable "trap".
3438 * v850-opc.c (v850_opcodes): Fix order of displacement
3439 and register for "set1", "clr1", "not1", and "tst1".
3441 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3443 * v850-opc.c (v850_operands): Add "B3" support.
3444 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3447 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3449 * v850-opc.c: Close unterminated comment.
3451 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3453 * v850-opc.c (v850_operands): Add flags field.
3454 (v850_opcodes): add move opcodes.
3456 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3458 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3459 * configure: (bfd_v850v_arch) Add new case.
3460 * configure.in: (bfd_v850_arch) Add new case.
3461 * v850-opc.c: New file.
3463 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3465 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3467 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3469 * d10v-opc.c: Add additional information to the opcode
3470 table to help determinine which instructions can be done
3473 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3475 * mpw-make.sed: Update editing of include pathnames to be
3478 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3480 * arm-opc.h: Added "bx" instruction definition.
3482 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3484 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3486 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3488 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3490 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3492 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3494 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3496 * makefile.vms: Update for alpha-opc changes.
3498 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3500 * i386-dis.c (print_insn_i386): Actually return the correct value.
3501 (ONE, OP_ONE): #ifdef out; not used.
3503 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3505 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3506 Changed subi operand type to treat 0 as 16.
3508 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3510 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3513 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3515 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3516 memory transfer instructions. Add new format string entries %h and %s.
3517 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3520 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3522 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3523 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3525 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3527 * alpha-dis.c (print_insn_alpha_osf): Remove.
3528 (print_insn_alpha_vms): Remove.
3529 (print_insn_alpha): Make globally visible. Chose the register
3530 names based on info->flavour.
3531 * disassemble.c: Always return print_insn_alpha for the alpha.
3533 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3535 * d10v-dis.c (dis_long): Handle unknown opcodes.
3537 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3539 * d10v-opc.c: Changes to support signed and unsigned numbers.
3540 All instructions with the same name that have long and short forms
3541 now end in ".l" or ".s". Divs added.
3542 * d10v-dis.c: Changes to support signed and unsigned numbers.
3544 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3546 * d10v-dis.c: Change all functions to use info->print_address_func.
3548 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3550 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3551 move ccr/sr insns more strict so that the disassembler only
3552 selects them when the addressing mode is data register.
3554 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3555 * d10v-opc.c (pre_defined_registers): Declare.
3556 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3557 to pick a better name for the registers.
3559 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3561 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3562 operands for fexpand and fpmerge. From Christian Kuehnke
3563 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3565 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3567 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3568 print routine. Take new regnames and cpumask arguments.
3569 Kill the environment variable nonsense.
3570 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3571 (print_insn_alpha_vms): New function. Do VMS style regnames.
3572 * disassemble.c (disassembler): Test bfd flavour to pick
3573 between OSF and VMS routines. Default to OSF.
3575 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3577 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3578 * configure: Rebuild.
3579 * Makefile.in (install): Use @INSTALL_SHLIB@.
3581 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3583 * configure: (bfd_d10v_arch) Add new case.
3584 * configure.in: (bfd_d10v_arch) Add new case.
3585 * d10v-dis.c: New file.
3586 * d10v-opc.c: New file.
3587 * disassemble.c (disassembler) Add entry for d10v.
3589 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3591 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3592 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3594 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3596 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3597 distinguish between variants of the instruction set.
3598 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3599 distinguish between variants of the instruction set.
3601 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3603 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3604 the 8086 instruction set.
3605 * i386-dis.c: General cleanups. Make most things static. Add
3606 prototypes. Get rid of static variables aflags and dflags. Pass
3607 them as args (to almost everything).
3609 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3611 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3613 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3615 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3616 if the next arg is marked with SRC_IN_DST. Gross.
3618 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3619 we're looking for and find EXR.
3621 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3622 if we're looking for KBIT and we don't find it.
3624 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3627 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3628 3bit immediate operands.
3630 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3632 * Released binutils 2.7.
3634 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3635 <kkaempf@progis.ac-net.de>.
3637 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3639 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3641 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3643 * sparc-dis.c (print_insn_sparclite): New routine to print
3644 sparclite instructions.
3646 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3648 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3650 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3652 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3653 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3654 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3656 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3658 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3659 Use autoconf-set values.
3660 (docdir, oldincludedir): Removed.
3661 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3663 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3665 * alpha-opc.c: New file.
3666 * alpha-opc.h: Remove.
3667 * alpha-dis.c: Complete rewrite to use new opcode table.
3668 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3669 * configure: Rebuild with autoconf 2.10.
3670 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3671 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3673 (alpha-opc.o): New target.
3675 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3677 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3678 Set imm_added_to_rs1 even if the source and destination register
3681 * sparc-opc.c: Add some two operand forms of the wr instruction.
3683 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3685 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3688 * disassemble.c (disassembler): Handle H8/S.
3689 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3691 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3693 * sparc-opc.c: Add beq/teq as aliases for be/te.
3695 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3696 <sergei@msil.sps.mot.com>.
3698 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3700 * makefile.vms: New file.
3702 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3704 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3706 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3709 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3711 * i386-dis.c (OP_OFF): Call append_prefix.
3713 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3715 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3716 unsigned long to silence a warning from the Solaris PowerPC
3719 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3721 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3723 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3725 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3727 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3728 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3729 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3730 cpush, cpusha, cpull sparclet insns.
3732 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3734 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3736 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3738 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3739 Set F_FLOAT on other floating point instructions.
3741 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3743 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3745 (powerpc_opcodes): Add 860/821 specific SPRs.
3747 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3749 * configure.in: Permit --enable-shared to specify a list of
3750 directories. Set and substitute BFD_PICLIST.
3751 * configure: Rebuild.
3752 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3753 uses. Set to @BFD_PICLIST@.
3755 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3757 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3758 not "abs", which may be needed for the absolute in something
3759 like btst #0,@10:8. Print L_3 immediates separately from other
3760 immediates. Change ABSMOV reference to ABS8MEM.
3762 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3764 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3765 (current_arch_mask): New static global.
3766 (compute_arch_mask): New static function.
3767 (print_insn_sparc): Delete sparc_v9_p. New static local
3768 current_mach. Resort opcode table if current_mach changes.
3769 Generalize "insn not supported" test.
3770 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3771 Delete test for v9/!v9.
3772 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3774 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3775 (brfcx): Renamed to FBRX.
3776 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3777 coprocessor mnemonics are not supported on the sparclet).
3778 (condf): Renamed to CONDF.
3779 (SLCBCC2): Delete F_ALIAS flag.
3781 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3783 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3784 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3786 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3788 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3789 that the shared library version number is set correctly.
3791 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3793 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3794 Miles Bader <miles@gnu.ai.mit.edu>.
3795 * configure: Rebuild.
3797 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3799 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3802 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3804 * configure: Rebuild with autoconf 2.8.
3806 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3808 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3809 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3811 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3813 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3814 since they appear as targets in Makefile.in.
3815 * configure: Rebuild.
3817 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3819 * mpw-make.sed: Edit out shared library support bits.
3821 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3823 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3824 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3825 (sparc_opcodes): Add sparclet insns.
3826 (sparclet_cpreg_table): New static local.
3827 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3828 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3830 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3832 * i386-dis.c (index16): New static variable.
3833 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3835 (OP_indirE): Return result of OP_E.
3836 (OP_E): Check for 16 bit addressing mode, and disassemble
3837 correctly. Optimised 32 bit case a little. Don't print
3838 "(base,index,scale)" when sib specifies only an offset.
3840 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3842 * configure.in: Set and substitute SHLIB_DEP.
3843 * configure: Rebuild.
3844 * Makefile.in (SHLIB_DEP): New variable.
3845 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3846 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3847 COMMON_SHLIB, add them to piclist with appropriate modifications.
3848 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3849 here: just use piclist.
3851 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3853 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3854 (print_insn_sparc): Rewrite v9/not-v9 tests.
3855 (compare_opcodes): Likewise.
3856 * sparc-opc.c (MASK_<ARCH>): Define.
3857 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3858 (sparclet,v6notv9): Define.
3859 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3860 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3862 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3864 * configure.in: Call AC_PROG_CC before configure.host.
3865 * configure: Rebuild.
3867 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3869 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3871 * i386-dis.c (onebyte_has_modrm): New static array.
3872 (twobyte_has_modrm): New static array.
3873 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3875 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3877 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3880 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3882 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3885 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3887 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3888 m68010up, not just m68020up | cpu32.
3890 * Makefile.in (SONAME): New variable.
3891 ($(SHLINK)): Make a link to the transformed name, as well.
3892 (stamp-tshlink): New target.
3893 (install): Skip stamp-tshlink during install.
3895 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3897 * configure.in: Call AC_ARG_PROGRAM.
3898 * configure: Rebuild.
3899 * Makefile.in (program_transform_name): New variable.
3900 (install): Transform library name before installing it.
3902 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3904 * i960-dis.c (mem): Add HX dcinva instruction.
3906 Support for building as a shared library, based on patches from
3907 Alan Modra <alan@spri.levels.unisa.edu.au>:
3908 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3909 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3910 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3911 * configure: Rebuild.
3912 * Makefile.in (ALLLIBS): New variable.
3913 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3914 (COMMON_SHLIB, SHLINK): New variables.
3915 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3916 (STAGESTUFF): Remove variable.
3917 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3918 (stamp-piclist, piclist): New targets.
3919 ($(SHLIB), $(SHLINK)): New targets.
3920 ($(OFILES)): Depend upon stamp-picdir.
3921 (disassemble.o): Build twice if PICFLAG is set.
3922 (MOSTLYCLEAN): Add pic/*.o.
3923 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3924 (distclean): Remove pic and stamp-picdir.
3925 (install): Install shared libraries.
3926 (stamp-picdir): New target.
3928 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3930 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3931 Print unknown instruction as "unknown", rather than in hex.
3933 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3935 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3937 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3939 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3941 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3943 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3944 when necessary. From Ulrich Drepper
3945 <drepper@myware.rz.uni-karlsruhe.de>.
3947 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3949 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3950 sparc_num_opcodes. Update architecture enum values.
3951 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3952 (sparc_opcode_lookup_arch): New function.
3953 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3954 (sparc_opcodes): Add v9a shutdown insn.
3956 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3958 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3959 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3961 (print_insn_sparc64): Deleted.
3962 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3965 * sparc-opc.c (architecture_pname): Add v9a.
3967 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3969 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3970 incorrectly defined as 0x16 when it should be 0x15.
3971 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3972 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3973 excb (exception barrier) which is defined in the Alpha
3974 Architecture Handbook version 2.
3975 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3976 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3977 disassembled as or, for example.
3979 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3981 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3982 (_print_insn_mips): Change i from int to unsigned int.
3984 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3986 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3987 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3989 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3991 * i386-dis.c: Added Pentium Pro instructions.
3993 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3995 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3998 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4000 * sh-opc.h (sh_nibble_type): Added REG_B.
4001 (sh_arg_type): Added A_REG_B.
4002 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4004 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4006 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4008 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4010 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4012 * Makefile.in (distclean): Remove stamp-h. From Ronald
4013 F. Guilmette <rfg@monkeys.com>.
4015 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4017 From David Mosberger-Tang <davidm@azstarnet.com>:
4018 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4021 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4023 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4024 (sh_table): Added many SH3 opcodes.
4025 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4027 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4029 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4030 (subco,subco.): Mark this PPC, not PPCCOM.
4032 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4034 * configure: Rebuild with autoconf 2.7.
4036 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4038 * configure: Rebuild with autoconf 2.6.
4040 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4042 * configure.in: Sort list of architectures. Accept but do nothing
4043 for alliant, convex, pyramid, romp, and tahoe.
4045 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4047 * a29k-dis.c (print_special): Change num to unsigned int.
4049 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4051 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4054 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4056 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4057 * configure: Rebuilt.
4059 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4061 * configure.in: Add case for bfd_i860_arch.
4062 * configure: Rebuild.
4064 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4066 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4067 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4068 (NEXTDOUBLE): Likewise.
4069 (print_insn_m68k): Don't match fmoveml if there is more than one
4070 register in the list.
4071 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4073 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4075 * m68k-opc.c: Use #W rather than #w.
4076 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4078 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4080 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4081 and likewise for all the dbxx opcodes.
4083 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4085 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4087 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4089 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4090 the VR4100 specific instructions to the mips_opcodes structure.
4092 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4094 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4095 ugly Metrowerks bug in CW6, is fixed in CW7.
4097 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4099 * ppc-opc.c (whole file): Add flags for common/any support.
4101 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4103 * Makefile.in (BISON): Remove macro.
4104 (FLAGS_TO_PASS): Remove BISON.
4106 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4108 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4110 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4111 instructions that take no args by looking at the match mask.
4112 (print_insn_arg): Always print "%" before register names.
4113 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4114 [case '_']: Don't print "@#" before address.
4115 [case 'J']: Use "%s" as format string, not register name.
4116 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4118 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4120 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4123 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4125 From David Mosberger-Tang <davidm@azstarnet.com>
4127 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4128 (alpha_insn_set): added definitions for VAX floating point
4129 instructions (Unix compilers don't generate these, but handcoded
4130 assembly might still use them).
4132 * alpha-dis.c (print_insn_alpha): added support for disassembling
4133 the miscellaneous instructions in the Alpha instruction set.
4135 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4137 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4138 no longer create sysdep.h, sed ppc-opc.c to work around a
4139 serious Metrowerks C bug.
4140 * mpw-make.in: Remove.
4141 * mpw-make.sed: New file, used by mpw-configure to edit
4142 Makefile.in into an MPW makefile.
4144 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4146 * Makefile.in (maintainer-clean): New synonym for realclean.
4148 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4150 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4151 which use '0', '1', and '2' instead. Specify the proper size for
4152 a pmove immediate operand. Correct the pmovefd patterns to be
4153 moves to a register, not from a register.
4154 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4156 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4158 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4159 %psr, %wim, %tbr as F_NOTV9.
4161 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4163 * Makefile.in (Makefile): Just rebuild Makefile when running
4165 (config.h, stamp-h): New targets.
4166 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4167 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4168 rebuilding config.h.
4169 * configure: Rebuild.
4171 * mips-opc.c: Change unaligned loads and stores with "t,A"
4172 operands to use "t,A(b)".
4174 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4176 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4178 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4180 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4181 until 3 instead of until 2.
4183 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4185 * Makefile.in (ALL_CFLAGS): Define.
4186 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4187 (MOSTLYCLEAN): Add config.log.
4188 (distclean): Don't remove config.log.
4189 * configure.in: Substitute HDEFINES.
4190 * configure: Rebuild.
4192 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4194 * sh-opc.h (sh_arg_type): Add F_FR0.
4195 (sh_table, case fmac): Add F_FR0 as first argument.
4197 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4199 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4201 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4203 * sparc-dis.c: Remove all references to NO_V9.
4205 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4207 * aclocal.m4: Just include ../bfd/aclocal.m4.
4208 * configure: Rebuild.
4210 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4212 * sparc-dis.c (X_DISP19): Define.
4213 (print_insn, case 'G'): Use it.
4214 (print_insn, case 'L'): Sign extend displacement.
4216 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4218 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4219 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4220 host_makefile_frag or frags.
4221 * aclocal.m4: New file.
4222 * configure: Rebuild.
4223 * Makefile.in (INSTALL): Set to @INSTALL@.
4224 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4225 (INSTALL_DATA): Set to @INSTALL_DATA@.
4227 (AR_FLAGS): Set to rc rather than qc.
4228 (CC): Define as @CC@.
4229 (CFLAGS): Set to @CFLAGS@.
4230 (@host_makefile_frag@): Remove.
4231 (config.status): Remove dependency upon @frags@.
4233 * configure.in: ../bfd/config.bfd now just sets shell variables.
4234 Use them rather than looking through target Makefile fragments.
4235 * configure: Rebuild.
4237 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4239 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4241 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4243 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4244 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4247 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4248 (lookup_{name,value}): New functions.
4249 (prefetch_table): New static local.
4250 (sparc_{encode,decode}_prefetch): New functions.
4251 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4253 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4255 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4258 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4260 * sh-dis.c: Correct comment on first line of file.
4262 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4264 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4266 * sparc-opc.c (asi, membar): New static locals.
4267 (sparc_{encode,decode}_{asi,membar}): New functions.
4268 (sparc_opcodes, membar insn): Fix.
4269 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4270 Support decoding of membar masks.
4273 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4275 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4277 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4279 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4280 and likewise for the other branches. Add bhs as an alias for bcc,
4281 and likewise for the size variants. Add dbhs as an alias for
4284 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4286 * sh-opc.h (FP sts instructions): Update to match reality.
4288 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4290 * m68k-dis.c: (fpcr_names): Add % before all register names.
4291 (reg_names): Likewise.
4292 (print_insn_arg): Don't explicitly print % before register names.
4293 Add % before register names in static array names. In case 'r',
4294 print data registers as `@(Dn)', not `Dn@'. When printing a
4295 memory address, don't print @# before it.
4296 (print_indexed): Change base_disp and outer_disp from int to
4297 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4298 syntax. Sign extend 8 byte displacement correctly.
4299 (print_base): Print using MIT syntax. Print zpc when appropriate.
4300 Change parameter disp from int to bfd_vma.
4302 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4305 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4307 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4308 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4309 * sh-opc.h (sh_arg_type): Add new operand types.
4310 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4312 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4314 * Makefile.in (distclean): Remove generated file config.h.
4316 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4318 * Makefile.in (distclean): Remove generated file config.h.
4320 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4322 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4324 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4326 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4327 rather than numopcodes. Use m68k_opcodes rather than removed
4328 opcode function. Don't check F_ALIAS.
4329 (print_insn_arg): Change first parameter to be const char *.
4330 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4331 (m68k-opc.o): New target.
4332 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4333 * configure: Rebuild.
4335 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4337 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4338 (opcode_bits, opcode_hash_table): New variables.
4339 (opcodes_initialized): Renamed from opcodes_sorted.
4340 (build_hash_table): New function.
4341 (is_delayed_branch): Use hash table.
4342 (print_insn): Renamed from print_insn_sparc, made static.
4343 Build and use hash table. If !sparc64, ignore sparc64 insns,
4344 and vice-versa if sparc64.
4345 (print_insn_sparc, print_insn_sparc64): New functions.
4346 (compare_opcodes): Move sparc64 opcodes to end.
4347 Print commutative insns with constant second.
4348 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4350 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4352 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4353 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4354 avoids printing a delay slot in a delay slot.
4355 * sh-opc.h (sh_table): Fully bracket last entry.
4357 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4359 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4361 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4363 * configure.in: Get host_makefile_frag from ${srcdir}.
4365 * configure.in: Autoconfiscated. Check for string[s].h. Create
4366 config.h from config.in. Don't set up sysdep.h link.
4367 * sysdep.h: New file.
4368 * configure, config.in: New files, generated from configure.in.
4369 * Makefile.in: Updated to be processed autoconf-style.
4370 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4371 (Makefile): Depend on config.status.
4372 (config.status): New rule.
4373 * configure.bat: Update Makefile substitutions.
4375 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4377 * mips-opc.c (L1): Define.
4378 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4379 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4382 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4384 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4385 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4386 have multiple add units but only a single logical unit.
4388 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4389 shifted by 18, without any insertion or extraction function.
4390 (insert_cr, extract_cr): Remove.
4392 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4394 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4397 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4399 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4400 * sh-opc.h: Add copyright.
4402 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4404 * Makefile.in (crunch-m68k): Delete extra target accidentally
4405 checked in a while ago.
4407 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4409 * sh-opc.h (sh_table): Add SH3 support.
4411 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4413 * sh-opc.h: Added bsrf and braf.
4415 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4417 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4418 bogus [ls]fm{ea,fd} patterns.
4420 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4421 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4422 initialize it from memory. Make function static.
4423 (print_insn_{big,little}_arm): New functions.
4424 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4425 the correct endianness.
4427 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4429 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4432 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4434 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4435 17th, so that it builds again using GCC as the compiler.
4437 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4439 * mips-dis.c (print_insn_little_mips): Cast return value from
4440 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4441 expects an unsigned long, and that might be fewer words of
4442 argument storage (e.g., if bfd_vma is long long on a 32-bit
4444 (print_insn_big_mips): Likewise with bfd_getb32 value.
4445 (_print_insn_mips): Now static.
4447 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4449 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4450 gcc memory hog problem with initializer is fixed.
4452 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4454 Merge in support for Mac MPW as a host.
4455 (Old change descriptions retained for informational value.)
4457 * mpw-config.in (archname): Compute from the config.
4458 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4460 * mpw-config.in (target_arch): Compute from canonical target.
4461 (m68k, mips, powerpc, sparc): Add architectures.
4462 * mpw-make.in (disassemble.c.o): Add.
4463 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4465 * mpw-config.in (BFD_MACHINES): Set to a default value.
4466 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4468 * mpw-make.in (CSEARCH): Add extra-include to search path.
4470 * mpw-config.in (varargs.h): Don't create.
4471 (sysdep.h): Create using forward-include.
4472 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4474 * mpw-config.in: New file, MPW version of configure.in.
4475 * mpw-make.in: New file, MPW version of Makefile.in.
4477 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4479 * alpha-dis.c (print_insn_alpha): Put empty statement after
4482 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4484 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4485 (low_sign_extend): Likewise.
4486 (get_field): Delete unused function.
4487 (set_field, deposit_14, deposit_21): Likewise.
4489 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4491 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4494 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4496 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4498 * alpha-opc.h (OSF_ASMCODE): define
4499 print pal-code names as defined in App C of the
4500 Alpha Architecture Reference Manual
4502 * alpha-dis.c: cleaned up output
4503 print stylized code forms as defined in App A.4.3 of the
4504 Alpha Architecture Reference Manual
4506 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4508 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4510 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4513 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4515 * m68k-dis.c (opcode): New function. Returns address of opcode
4516 table entry given index, even if the opcode table was split to
4517 work around gcc bugs.
4518 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4520 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4521 (reg_names): Now const.
4522 (print_insn_arg): Arrays cacheFieldName and names now const.
4523 (print_indexed): Array scales now const.
4525 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4527 * ppc-opc.c: Sort recently added instructions by minor opcode
4528 number within major opcode number.
4530 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4532 * hppa-dis.c: Include libhppa.h.
4534 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4536 * mips-opc.c: Change dli to use M_DLI, and add dla.
4538 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4540 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4542 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4544 * mips-opc.c: Add r4650 mul instruction.
4546 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4548 * mips-opc.c: Add uld and usd macros for unaligned double load and
4551 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4553 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4554 mfdcr, mtdcr, icbt, iccci.
4556 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4558 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4559 signed char fields to shorts, more portable.
4561 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4563 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4564 char fields as signed chars, since they may have negative values.
4566 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4568 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4569 (mycroft@netbsd.org).
4571 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4573 From "Logg, Ed" <elogg@ea.com>:
4574 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4575 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4578 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4580 * ppc-opc.c: Changes based on patch from David Edelsohn
4581 <edelsohn@mhpcc.edu>.
4582 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4585 (insert_tbr): New static function.
4586 (extract_tbr): New static function.
4587 (XFXFXM_MASK, XFXM): Define.
4588 (XSPRBAT_MASK, XSPRG_MASK): Define.
4589 (powerpc_opcodes): Add instructions to access special registers by
4590 name. Add mtcr and mftbu.
4592 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4594 * mips-opc.c (P3): Define.
4595 (mips_opcodes): Add mad and madu.
4597 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4599 * configure.in: Add W65 support.
4600 * disassemble.c: Likewise.
4601 * w65-opc.h, w65-dis.c: New files.
4603 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4605 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4608 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4610 * mips-opc.c: Add dli as a synonym for li.
4612 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4614 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4615 print something for reserved opcode values, even if it won't
4618 * mips-dis.c (_print_insn_mips): When initializing, shift right
4619 and mask, to avoid sign extension problems on the Alpha.
4621 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4624 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4626 * sh-opc.h (mov.l gbr): Get direction right.
4627 * sh-dis.c (print_insn_shx): New function.
4628 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4629 print opcodes with right byte order.
4631 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4633 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4634 to avoid conflicts with getopt.
4636 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4638 * hppa-dis.c (print_insn_hppa): Read the instruction using
4639 bfd_getb32, so that it works on a little endian or 64 bit host.
4640 Remove unused local variable op.
4642 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4644 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4645 addu does not work correctly if -mips3.
4647 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4649 * a29k-dis.c (print_special): Add special register names defined
4650 on 29030, 29040 and 29050.
4651 (print_insn): Handle new operand type 'I'.
4653 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4655 * Makefile.in (INSTALL): Use top level install.sh script.
4657 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4659 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4660 that it works on a little endian host.
4662 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4664 * configure.in: Use ${config_shell} when running config.bfd.
4666 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4668 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4670 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4672 * a29k-dis.c (print_insn): Print the opcode.
4674 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4676 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4678 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4680 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4682 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4684 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4685 which store a value into memory.
4687 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4689 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4690 * arm-dis.c, arm-opc.h: New files.
4692 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4694 * Makefile.in (ns32k-dis.o): Add dependency.
4695 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4696 string, not as array of chars.
4698 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4700 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4702 * sparc-opc.c: Added sparclite extended FP operations, and
4703 versions of v9 impdep* instructions permitting specification of
4706 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4708 * i960-dis.c (reg_names): Now const.
4709 (struct sparse_tabent): New type, copied from array type in mem
4711 (ctrl): Local static array ctrl_tab now const.
4712 (cobr): Local static array cobr_tab now const.
4713 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4714 static variable mem_tab no longer explicitly initialized. Changed
4715 mem_init to const array of struct sparse_tabent.
4716 (reg): Local static variable reg_tab no longer explicitly
4717 initialized. Changed reg_init to const array of struct
4719 (ea): Local static array scale_tab now const.
4721 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4724 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4726 * configure.bat: the disassember needs to be enabled for
4727 "objdump -d" to work in djgpp.
4729 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4731 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4732 (invalid_float): Enabled general version, doesn't require running
4733 on ns32k host. Changed to take char* argument, and test for
4734 explicitly specified sizes, instead of using sizeof() on host CPU
4736 (INVALID_FLOAT): Cast first argument.
4737 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4738 list_P032, list_M032): Now const.
4739 (optlist, list_search): Made appropriate arguments now point to
4741 (print_insn_arg): Changed static array of one-character-string
4742 pointers into a static const array of characters; fixed sprintf
4743 statement accordingly.
4745 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4747 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4748 from distribution. A ns32k-dis.c from a previous distribution has
4749 been brought up to date and supports the new interface.
4751 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4753 * configure.in: add bfd_ns32k_arch target support.
4755 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4756 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4758 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4760 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4763 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4765 * h8300-dis.c, mips-dis.c: Don't use true and false.
4767 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4769 * configure.in: Change --with-targets to --enable-targets.
4771 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4773 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4774 opcodes to the first instruction with that opcode, to speed
4775 disassembly of large files. From ralphc@pyramid.com (Ralph
4778 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4780 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4782 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4784 * configure.bat: update to latest makefile.in
4786 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4788 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4789 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4790 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4791 slot insn is in a delay slot.
4792 * z8k-opc.h: (resflg): Fix patterns.
4793 * h8500-opc.h Fix CR insn patterns.
4795 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4797 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4798 "cmpl" before POWER versions, so that gas -many uses them.
4800 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4802 * disassemble.c: New file.
4803 * Makefile.in (OFILES): Add disassemble.o.
4804 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4805 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4806 binutils/configure.in.
4808 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4809 opcode being examined.
4811 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4813 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4814 (insert_ral, insert_ram, insert_ras): New functions.
4815 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4816 RAS for store with update.
4818 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4820 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4821 (edelsohn@npac.syr.edu).
4823 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4825 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4828 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4830 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4832 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4834 * ppc-opc.c (powerpc_operands): The signedp field has been
4835 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4836 instead. Add new operand SISIGNOPT.
4837 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4838 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4839 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4842 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4844 * i386-dis.c (struct private): Renamed to dis_private. `private'
4845 is a reserved word for dynix cc.
4847 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4849 * configure.in: Change error message to refer to bfd/config.bfd
4850 rather than bfd/configure.in.
4852 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4854 * ppc-opc.c: Define POWER2 as short alias flag.
4855 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4858 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4860 * i960-dis.c (print_insn_i960): Don't read a second word for
4861 opcodes 0, 1, 2 and 3.
4863 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4865 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4867 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4869 * m68881-ext.c: Removed; no longer used.
4870 * Makefile.in: Changed accordingly.
4872 * m68k-dis.c (ext_format_68881): Don't declare.
4873 (print_insn_m68k): If an instruction uses place 'i', it uses at
4874 least four fixed bytes.
4875 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4876 extended float, convert to double using floatformat_to_double, not
4877 ieee_extended_to_double, and fetch the data before converting it.
4879 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4882 davidj@ICSI.Berkeley.EDU (David Johnson).
4884 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4886 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4887 PowerPC uses bdnz[l][a].
4889 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4891 * dis-buf.c, i386-dis.c: Include sysdep.h.
4893 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4895 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4897 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4898 by Motorola PowerPC 601 with PPC_OPCODE_601.
4899 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4900 Disassemble Motorola PowerPC 601 instructions as well as normal
4901 PowerPC instructions.
4903 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4905 * i960-dis.c (reg, mem): Just use a static array instead of
4908 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4910 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4911 condition name index if this is for a negated condition.
4913 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4914 Floating point format for 'H' operand is backwards from normal
4915 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4916 operands (fmpyadd and fmpysub), handle bizarre register
4917 translation correctly for single precision format.
4919 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4920 or 'I' operands if the next format specifier is 'M' (fcmp
4921 condition completer).
4923 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4925 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4926 single number giving a bitmask for the MB and ME fields of an M
4927 form instruction. Change NB to accept 32, and turn it into 0;
4928 also turn 0 into 32 when disassembling. Seperated SH from NB.
4929 (insert_mbe, extract_mbe): New functions.
4930 (insert_nb, extract_nb): New functions.
4931 (SC_MASK): Mask out SA and LK bits.
4932 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4933 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4934 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4935 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4936 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4937 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4938 (powerpc_macros): Define table of macro definitions.
4939 (powerpc_num_macros): Define.
4941 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4942 if PPC_OPERAND_NEXT is set.
4944 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4946 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4947 char. Retrieve contents using bfd_getl32 instead of shifting.
4949 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4951 * ppc-opc.c: New file. Opcode table for PowerPC, including
4952 opcodes for POWER (RS/6000).
4953 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4954 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4955 (CFILES): Add ppc-dis.c.
4956 (ppc-dis.o, ppc-opc.o): New targets.
4957 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4959 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4961 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4962 No space before 'u', 'f', or 'N'.
4964 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4966 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4967 farther than we should.
4969 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4971 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4973 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4975 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4977 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4978 needs it, to prevent reading past the end of a section.
4980 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4982 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4983 Removed t,A case for la; always use t,A(b) case.
4985 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4987 From Ted Lemen <mellon@pepper.ncd.com>
4988 * mips-dis.c (print_insn_arg): Handle 'k'.
4989 * mips-opc.c: Make cache use k, not t.
4991 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4993 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4994 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4995 FLOAT_FORMAT_CODE to put out floating point register names.
4997 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4999 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5001 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5003 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5005 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5007 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5008 larger than 32. Moved dsxx32 variants first for disassembler.
5010 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5012 * z8kgen.c, z8k-opc.h: Add full lda information.
5014 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5016 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5017 movb instructions. Any necessary space will be emitted by
5018 the code to handle nullification completers.
5020 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5022 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5024 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5026 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5027 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5029 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5031 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5033 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5035 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5036 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5038 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5040 * m88k-dis.c (m88kdis): comment change. Remove space after
5042 (printop): handle new arg types DEC and XREG for m88110.
5044 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5046 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5047 type for absolute branch addresses. Delete special
5048 "ble" and "be" code in 'W' operand code.
5050 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5052 * mips-opc.c: Set hazard information correctly for branch
5053 likely instructions.
5055 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5057 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5058 info->fprintf_func for printing and info->print_address_func for
5061 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5063 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5065 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5067 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5068 Corrected second case of "b" for disassembler.
5070 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5072 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5073 to BFD swapping routines to correspond to BFD name changes.
5075 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5077 * mips-opc.c: Change div machine instruction to be z,s,t rather
5078 than s,t. Change div macro to be d,v,t rather than d,s,t.
5079 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5080 rem and remu which generates only the corresponding div
5081 instruction. This is for compatibility with the MIPS assembler,
5082 which only generates the simple machine instruction when an
5083 explicit destination of $0 is used.
5084 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5086 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5088 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5089 WR_31 hazard for bal, bgezal, bltzal.
5091 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5093 * hppa-dis.c (print_insn_hppa): Use print function
5094 from within the disassemble_info, not fprintf_filtered.
5096 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5098 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5099 Law, law@cs.utah.edu.)
5101 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5103 * mips-opc.c ("absu"): Removed.
5106 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5108 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5109 Changed hazard information to distinguish between memory load
5110 delays and coprocessor load delays.
5112 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5114 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5116 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5118 * configure.in: Don't pass cpu to config.bfd.
5120 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5122 * m88k-dis.c (m88kdis): Make class unsigned.
5124 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5126 * alpha-dis.c (print_insn_alpha): One branch format case was
5127 missing the instruction name.
5129 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5131 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5132 Add the arch-specific auxiliary files.
5133 (OFILES): Remove the arch-specific auxiliary files
5134 and use BFD_MACHINES instead of DIS_LIBS.
5135 * configure.in: Set BFD_MACHINES based on --with-targets option.
5137 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5139 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5142 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5144 * sparc-opc.c: Change CONST to const to deal with gcc
5145 -Dconst=__const -traditional.
5147 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5149 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5150 coprocessor instructions out of #if 0, and made them use new
5153 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5155 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5157 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5159 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5160 instruction, for use by the disassembler.
5162 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5163 hand-coded sign extensions that depended on 32-bit host ints.
5164 FIXME, we still depend on big-endian host bitfield ordering.
5165 (sparc_print_insn): Set the insn_info_valid field, and the
5166 other fields that describe the instruction being printed.
5168 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5170 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5171 `jmp' instead of just one of them.
5173 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5175 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5176 (fput_fp_reg_r): Renamed from fput_reg_r.
5177 (fput_fp_reg): New function.
5178 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5180 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5182 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5184 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5186 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5188 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5189 don't output a space.
5191 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5193 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5195 * mips-opc.c: New file, containing opcode table from
5196 ../include/opcode/mips.h.
5197 * Makefile.in: Add it.
5199 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5201 * m88k-dis.c: New file, moved in from gdb and changed to use the
5202 new dis-asm.h disassembler interface.
5203 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5204 (m88k-dis.o): New target.
5206 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5208 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5209 argument string const char * to correspond to opcode/mips.h.
5211 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5213 * mips-dis.c: Updated to account for name changes in new version
5215 * Makefile.in: Added header file dependencies.
5217 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5219 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5221 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5223 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5224 extend, rather than shifts.
5226 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5228 * Makefile.in: Undo 15 June change.
5230 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5232 * m68k-dis.c (print_insn_arg): Change return value to byte count
5234 * m68k-dis.c: Re-write to detect invalid operands before
5235 printing anything, so we can handle this the same way we
5236 handle invalid opcodes.
5238 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5240 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5242 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5244 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5247 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5249 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5251 * configure.in: Do make sysdep.h link.
5252 * Makefile.in: Search ../include. Don't search ../bfd.
5254 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5256 Changes from Jeff Law, law@cs.utah.edu:
5257 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5258 Do not print a space before the completers specified by
5261 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5263 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5264 defined, since gdb has been fixed.
5266 Changes from Jeff Law, law@cs.utah.edu:
5267 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5268 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5269 be a *disassemble_info, not a *FILE.
5270 * hppa-dis.c: Support 'd', '!', and 'a'.
5271 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5272 * hppa-dis.c: Delete cases which are no longer needed.
5274 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5276 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5278 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5280 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5283 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5285 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5286 * configure.in: No longer need to configure to get sysdep.h.
5288 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5290 * Patches from Jeffrey Law <law@cs.utah.edu>.
5291 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5292 templates for 1.1 FP computational instructions.
5294 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5296 * h8500-dis.c (print_insn_h8500): Address argument is type
5298 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5301 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5302 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5304 * sparc-dis.c (compare_opcodes): Move static declaration to
5307 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5309 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5310 instruction, remove unimp hack from 'l' argument.
5312 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5314 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5317 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5319 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5320 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5323 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5325 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5326 arrays of string pointers to 2-d arrays of chars, to save
5329 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5331 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5332 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5334 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5336 * hppa-dis.c: New file from Utah, adapted to new disassembler
5338 * Makefile.in: Include it.
5340 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5342 * sh-dis.c, sh-opc.h: New files.
5344 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5346 * alpha-dis.c, alpha-opc.h: New files.
5348 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5350 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5353 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5355 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5357 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5359 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5362 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5364 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5365 and double percent signs a few places.
5367 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5369 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5370 Use info->print_address_func not print_address.
5372 * dis-buf.c (generic_print_address): New function.
5374 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5376 * Makefile.in: Add sparc-dis.c.
5377 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5379 Add `add' instruction to the set that get checked
5380 for a preceding `sethi' in order to print an absolute address.
5381 * (print_insn): Disassembly prefers real instructions.
5382 (is_delayed_branch): Speed up.
5383 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5384 Still missing some float ops, and needs testing.
5385 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5386 F_ALIAS. Use printf, not fprintf, when not passing a file
5388 (compare_opcodes): Check that identical instructions have
5389 identical opcodes, complain otherwise.
5392 * Include reg_names.
5394 Use dis-asm.h/read_memory_func interface.
5396 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5398 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5399 deliberately return non-zero to setjmp from longjmp. Otherwise
5400 this code fails to compile.
5402 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5404 * m68k-dis.c: Fix prototype for fetch_arg().
5406 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5408 * dis-buf.c: New file, for new read_memory_func interface.
5409 Makefile.in (OFILES): Include it.
5410 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5411 Use new read_memory_func interface.
5413 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5415 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5416 * h8500-opc.h: Fix couple of opcodes.
5418 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5420 * Makefile.in: add dvi & installcheck targets
5422 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5424 * Makefile.in: Update for h8500-dis.c.
5426 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5428 * h8500-dis.c, h8500-opc.h: New files
5430 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5432 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5433 ../include/dis-asm.h.
5434 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5435 and ../gdb/m68k-pinsn.c).
5436 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5437 and ../gdb/i386-pinsn.c).
5438 * m68881-ext.c: New file. Moved definition of
5439 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5440 * Makefile.in: Adjust for new files.
5441 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5442 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5443 can be dis-assembled.
5445 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5447 * mips-dis.c (print_insn_arg): Now returns void.
5449 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5451 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5452 files that use the macros.
5454 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5456 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5457 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5458 (CFILES): Added mips-dis.c.
5460 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5462 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5463 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5465 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5467 * Makefile.in: Improve *clean rules.
5468 * configure.in: Allow a default host.
5470 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5472 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5473 files include other sysdep files
5475 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5477 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5479 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5481 * configure.in: For host support, use ../bfd/configure.host
5482 so it stays in sync with the ../bfd/hosts database.
5484 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5486 * configure.in: use cpu-vendor-os triple instead of nested cases
5488 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5490 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5491 *always* the wrong one.
5493 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5495 * z8kgen.c: added copyright info
5497 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5499 * z8k-dis.c (unparse_instr): prettier tabs
5500 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5502 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5504 * configure.in: Add ncr* configuration.
5505 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5506 picayune ANSI compilers happy.
5508 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5510 * configure.in (i386): Make i386 and i486 synonymous for now.
5511 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5513 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5515 * Makefile.in (install): Fix typo.
5517 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5519 * Makefile.in (make): Remove obsolete crud.
5520 (sparc-opc.o): Avoid Sun Make VPATH bug.
5522 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5524 * Makefile.in: since there are no SUBDIRS, remove rule and
5525 references of subdir_do.
5527 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5529 * Makefile.in (install): Get the library name right here too.
5530 Don't install bfd.h, since it's unrelated to this library. No
5531 subdirs to recurse into, either.
5532 (CFILES): The source file has a .c suffix, not .o.
5534 * sparc-opc.c: New file, moved from BFD.
5535 * Makefile.in (OFILES): Build it.
5537 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5539 * z8k-dis.c: fixed forward refferences of some declarations.
5541 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5543 * Makefile.in: get the name of the library right
5545 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5547 * z8k-dis.c: knows how to disassemble z8k stuff
5548 * z8k-opc.h: new file full of z8000 opcodes
5552 version-control: never
projects / deliverable / binutils-gdb.git / blob