1 2012-05-17 Daniel Richard G. <skunk@iskunk.org>
2 Nick Clifton <nickc@redhat.com>
5 * configure.in: Add check that sysdep.h has been included before
6 any system header files.
7 * configure: Regenerate.
8 * config.in: Regenerate.
9 * sysdep.h: Generate an error if included before config.h.
10 * alpha-opc.c: Include sysdep.h before any other header file.
11 * alpha-dis.c: Likewise.
12 * avr-dis.c: Likewise.
13 * cgen-opc.c: Likewise.
14 * cr16-dis.c: Likewise.
15 * cris-dis.c: Likewise.
16 * crx-dis.c: Likewise.
17 * d10v-dis.c: Likewise.
18 * d10v-opc.c: Likewise.
19 * d30v-dis.c: Likewise.
20 * d30v-opc.c: Likewise.
21 * h8500-dis.c: Likewise.
22 * i370-dis.c: Likewise.
23 * i370-opc.c: Likewise.
24 * m10200-dis.c: Likewise.
25 * m10300-dis.c: Likewise.
26 * micromips-opc.c: Likewise.
27 * mips-opc.c: Likewise.
28 * mips61-opc.c: Likewise.
29 * moxie-dis.c: Likewise.
30 * or32-opc.c: Likewise.
32 * ppc-dis.c: Likewise.
33 * ppc-opc.c: Likewise.
34 * s390-dis.c: Likewise.
36 * sh64-dis.c: Likewise.
37 * sparc-dis.c: Likewise.
38 * sparc-opc.c: Likewise.
39 * spu-dis.c: Likewise.
40 * tic30-dis.c: Likewise.
41 * tic54x-dis.c: Likewise.
42 * tic80-dis.c: Likewise.
43 * tic80-opc.c: Likewise.
44 * tilegx-dis.c: Likewise.
45 * tilepro-dis.c: Likewise.
46 * v850-dis.c: Likewise.
47 * v850-opc.c: Likewise.
48 * vax-dis.c: Likewise.
49 * w65-dis.c: Likewise.
50 * xgate-dis.c: Likewise.
51 * xtensa-dis.c: Likewise.
52 * rl78-decode.opc: Likewise.
53 * rl78-decode.c: Regenerate.
54 * rx-decode.opc: Likewise.
55 * rx-decode.c: Regenerate.
57 2012-05-17 Alan Modra <amodra@gmail.com>
59 * ppc_dis.c: Don't include elf/ppc.h.
61 2012-05-16 Meador Inge <meadori@codesourcery.com>
63 * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
66 2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
67 Stephane Carrez <stcarrez@nerim.fr>
69 * configure.in: Add S12X and XGATE co-processor support to m68hc11
71 * disassemble.c: Likewise.
72 * configure: Regenerate.
73 * m68hc11-dis.c: Make objdump output more consistent, use hex
74 instead of decimal and use 0x prefix for hex.
75 * m68hc11-opc.c: Add S12X and XGATE opcodes.
77 2012-05-14 James Lemke <jwlemke@codesourcery.com>
79 * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
80 (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
81 (vle_opcd_indices): New array.
82 (lookup_vle): New function.
83 (disassemble_init_powerpc): Revise for second (VLE) opcode table.
84 (print_insn_powerpc): Likewise.
85 * ppc-opc.c: Likewise.
87 2012-05-14 Catherine Moore <clm@codesourcery.com>
88 Maciej W. Rozycki <macro@codesourcery.com>
89 Rhonda Wittels <rhonda@codesourcery.com>
90 Nathan Froyd <froydnj@codesourcery.com>
92 * ppc-opc.c (insert_arx, extract_arx): New functions.
93 (insert_ary, extract_ary): New functions.
94 (insert_li20, extract_li20): New functions.
95 (insert_rx, extract_rx): New functions.
96 (insert_ry, extract_ry): New functions.
97 (insert_sci8, extract_sci8): New functions.
98 (insert_sci8n, extract_sci8n): New functions.
99 (insert_sd4h, extract_sd4h): New functions.
100 (insert_sd4w, extract_sd4w): New functions.
101 (insert_vlesi, extract_vlesi): New functions.
102 (insert_vlensi, extract_vlensi): New functions.
103 (insert_vleui, extract_vleui): New functions.
104 (insert_vleil, extract_vleil): New functions.
105 (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
106 (BI16, BI32, BO32, B8): New.
107 (B15, B24, CRD32, CRS): New.
108 (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
109 (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
110 (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
111 (SH6_MASK): Use PPC_OPSHIFT_INV.
112 (SI8, UI5, OIMM5, UI7, BO16): New.
113 (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
114 (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
116 (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
117 (OPVUP, OPVUP_MASK OPVUP): New
118 (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
119 (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
120 (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
121 (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
122 (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
123 (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
124 (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
125 (SE_IM5, SE_IM5_MASK): New.
126 (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
127 (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
128 (BO32DNZ, BO32DZ): New.
129 (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
131 (powerpc_opcodes): Add new VLE instructions. Update existing
132 instruction to include PPCVLE if supported.
133 * ppc-dis.c (ppc_opts): Add vle entry.
134 (get_powerpc_dialect): New function.
135 (powerpc_init_dialect): VLE support.
136 (print_insn_big_powerpc): Call get_powerpc_dialect.
137 (print_insn_little_powerpc): Likewise.
138 (operand_value_powerpc): Handle negative shift counts.
139 (print_insn_powerpc): Handle 2-byte instruction lengths.
141 2012-05-11 Daniel Richard G. <skunk@iskunk.org>
144 * configure.in: Invoke ACX_HEADER_STRING.
145 * configure: Regenerate.
146 * config.in: Regenerate.
147 * sysdep.h: If STRINGS_WITH_STRING is defined then include both
148 string.h and strings.h.
150 2012-05-11 Nick Clifton <nickc@redhat.com>
153 * arm-dis.c (print_insn): Fix detection of instruction mode in
154 files containing multiple executable sections.
156 2012-05-03 Sean Keys <skeys@ipdatasys.com>
158 * Makefile.in, configure: regenerate
159 * disassemble.c (disassembler): Recognize ARCH_XGATE.
160 * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
162 * configure.in: Recognize xgate.
163 * xgate-dis.c, xgate-opc.c: New files for support of xgate
164 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
165 and opcode generation for xgate.
167 2012-04-30 DJ Delorie <dj@redhat.com>
169 * rx-decode.opc (MOV): Do not sign-extend immediates which are
170 already the maximum bit size.
171 * rx-decode.c: Regenerate.
173 2012-04-27 David S. Miller <davem@davemloft.net>
175 * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
176 * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
178 * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
179 * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
181 * sparc-opc.c (CBCOND): New define.
182 (CBCOND_XCC): Likewise.
183 (cbcond): New helper macro.
184 (sparc_opcodes): Add compare-and-branch instructions.
186 * sparc-dis.c (print_insn_sparc): Handle ')'.
187 * sparc-opc.c (sparc_opcodes): Add crypto instructions.
189 * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
190 into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
192 2012-04-12 David S. Miller <davem@davemloft.net>
194 * sparc-dis.c (X_DISP10): Define.
195 (print_insn_sparc): Handle '='.
197 2012-04-01 Mike Frysinger <vapier@gentoo.org>
199 * bfin-dis.c (fmtconst): Replace decimal handling with a single
200 sprintf call and the '*' field width.
202 2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
204 * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
206 2012-03-16 Alan Modra <amodra@gmail.com>
208 * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
209 (powerpc_opcd_indices): Bump array size.
210 (disassemble_init_powerpc): Set powerpc_opcd_indices entries
211 corresponding to unused opcodes to following entry.
212 (lookup_powerpc): New function, extracted and optimised from..
213 (print_insn_powerpc): ..here.
215 2012-03-15 Alan Modra <amodra@gmail.com>
216 James Lemke <jwlemke@codesourcery.com>
218 * disassemble.c (disassemble_init_for_target): Handle ppc init.
219 * ppc-dis.c (private): New var.
220 (powerpc_init_dialect): Don't return calloc failure, instead use
222 (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
223 (powerpc_opcd_indices): New array.
224 (disassemble_init_powerpc): New function.
225 (print_insn_big_powerpc): Don't init dialect here.
226 (print_insn_little_powerpc): Likewise.
227 (print_insn_powerpc): Start search using powerpc_opcd_indices.
229 2012-03-10 Edmar Wienskoski <edmar@freescale.com>
231 * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
232 * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
233 (PPCVEC2, PPCTMR, E6500): New short names.
234 (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
235 mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
236 lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
237 lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
238 lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
239 optional operands on sync instruction for E6500 target.
241 2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
243 * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
245 2012-02-27 Alan Modra <amodra@gmail.com>
247 * mt-dis.c: Regenerate.
249 2012-02-27 Alan Modra <amodra@gmail.com>
251 * v850-opc.c (extract_v8): Rearrange to make it obvious this
252 is the inverse of corresponding insert function.
253 (extract_d22, extract_u9, extract_r4): Likewise.
254 (extract_d9): Correct sign extension.
255 (extract_d16_15): Don't assume "long" is 32 bits, and don't
256 rely on implementation defined behaviour for shift right of
258 (extract_d16_16, extract_d17_16, extract_i9): Likewise.
259 (extract_d23): Likewise, and correct mask.
261 2012-02-27 Alan Modra <amodra@gmail.com>
263 * crx-dis.c (print_arg): Mask constant to 32 bits.
264 * crx-opc.c (cst4_map): Use int array.
266 2012-02-27 Alan Modra <amodra@gmail.com>
268 * arc-dis.c (BITS): Don't use shifts to mask off bits.
269 (FIELDD): Sign extend with xor,sub.
271 2012-02-25 Walter Lee <walt@tilera.com>
273 * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
274 * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
275 TILEPRO_OPC_LW_TLS_SN.
277 2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
279 * i386-opc.h (HLEPrefixNone): New.
280 (HLEPrefixLock): Likewise.
281 (HLEPrefixAny): Likewise.
282 (HLEPrefixRelease): Likewise.
284 2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
286 * i386-dis.c (HLE_Fixup1): New.
287 (HLE_Fixup2): Likewise.
288 (HLE_Fixup3): Likewise.
295 (MOD_C6_REG_7): Likewise.
296 (MOD_C7_REG_7): Likewise.
297 (RM_C6_REG_7): Likewise.
298 (RM_C7_REG_7): Likewise.
299 (XACQUIRE_PREFIX): Likewise.
300 (XRELEASE_PREFIX): Likewise.
301 (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
302 cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
303 Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
304 (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
305 not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
306 MOD_C6_REG_7 and MOD_C7_REG_7.
307 (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
308 (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
310 (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
311 (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
313 * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
315 (cpu_flags): Add CpuHLE and CpuRTM.
316 (opcode_modifiers): Add HLEPrefixOk.
318 * i386-opc.h (CpuHLE): New.
320 (HLEPrefixOk): Likewise.
321 (i386_cpu_flags): Add cpuhle and cpurtm.
322 (i386_opcode_modifier): Add hleprefixok.
324 * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
325 add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
326 sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
327 operand. Add xacquire, xrelease, xabort, xbegin, xend and
329 * i386-init.h: Regenerated.
330 * i386-tbl.h: Likewise.
332 2012-01-24 DJ Delorie <dj@redhat.com>
334 * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
335 * rl78-decode.c: Regenerate.
337 2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
340 * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
342 2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
344 * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
345 register and move them after pmove with PSR/PCSR register.
347 2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
349 * i386-dis.c (mod_table): Add vmfunc.
351 * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
352 (cpu_flags): CpuVMFUNC.
354 * i386-opc.h (CpuVMFUNC): New.
355 (i386_cpu_flags): Add cpuvmfunc.
357 * i386-opc.tbl: Add vmfunc.
358 * i386-init.h: Regenerated.
359 * i386-tbl.h: Likewise.
361 For older changes see ChangeLog-2011
367 version-control: never