2 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
4 * v850-dis.c (disassemble): Improved display of register lists.
7 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
9 * sparc-opc.c (sparc_opcodes): Fix assembler args to
10 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
11 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
14 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
16 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
18 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
20 * cgen-asm.c (cgen_parse_address): New argument resultp.
22 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
24 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
26 * mn10200-dis.c (disassemble): PC relative instructions are
27 relative to the next instruction, not the current instruction.
29 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
31 * v850-dis.c (disassemble): Only signed extend values that are not
32 returned by extract functions.
33 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
35 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
37 * v850-opc.c: Update comments. Remove use of
38 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
40 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
42 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
44 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
46 * configure: Rebuilt with latest devo autoconf for NT support.
48 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
50 * v850-dis.c (disassemble): Use curly brace syntax for register
53 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
54 where r0 is being used as a destination register.
57 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
59 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
63 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
65 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
66 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
67 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
68 Add insns to access SGR and DBR.
69 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
72 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
74 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
76 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
78 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
80 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
85 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
87 * configure (cgen_files): Add support for v850e target.
88 * configure.in (cgen_files): Add support for v850e target.
92 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
94 * configure (cgen_files): Add support for v850eq target.
95 * configure.in (cgen_files): Add support for v850eq target.
98 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
100 * configure.in (bfd_arc_arch): Add.
101 * configure: Rebuild.
102 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
103 * Makefile.in: Rebuild.
104 * arc-dis.c, arc-opc.c: New files.
105 * disassemble.c (ARCH_all): Define ARCH_arc.
106 (disassembler): Add ARC support.
108 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
110 start-sanitize-v850eq
111 * .Sanitize (Do-first): Add support for keep-v850eq command line
114 * v850-dis.c (disassemble): Add support for v850EQ instructions.
116 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
117 (v850_opcodes): Add v850EQ instructions.
120 * .Sanitize (Do-first): Add support for keep-v850e command line
123 * v850-dis.c (disassemble): Add support for v850E instructions.
125 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
126 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
127 insert_spe, extract_spe): New Functions.
128 (v850_opcodes): Add v850E instructions.
131 * v850-opc.c: Reorganised and re-layed out to improve readability
134 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
136 * configure: Rebuild with autoconf 2.12.1.
138 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
140 * aclocal.m4, configure: Rebuild with new automake patches.
142 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
144 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
145 * acinclude.m4: Just include acinclude.m4 from BFD.
146 * aclocal.m4, configure: Rebuild.
148 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
150 * Makefile.am: New file, based on old Makefile.in.
151 * acconfig.h: New file.
152 * acinclude.m4: New file.
153 * stamp-h.in: New file.
154 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
155 Removed shared library handling; now handled by libtool. Replace
156 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
157 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
158 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
159 handling in AC_OUTPUT.
160 * dep-in.sed: Change .o to .lo.
161 * Makefile.in: Now built with automake.
162 * aclocal.m4: Now built with aclocal.
163 * config.in, configure: Rebuild.
165 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
167 * mips-opc.c: Fix typo/thinko in "eret" instruction.
170 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
172 * mips-opc.c: Fix coding of mtsa.
175 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
177 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
179 * sparc-dis.c (sorted_opcodes): New static local.
180 (struct opcode_hash): `opcode' is pointer to const element.
181 (build_hash): First arg is now table of sorted pointers.
182 (print_insn_sparc): Sort opcodes by sorting table of pointers.
183 (compare_opcodes): Update.
185 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
187 * cgen-opc.c: #include <ctype.h>.
188 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
189 Handle case insensitive hashing.
190 (hash_keyword_value): Change type of `value' to unsigned int.
192 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
194 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
195 precision FP, mark it as such. Likewise for double precision
196 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
199 (mips_builtin_opcodes): Remove non-existant r5900 instructions
203 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
205 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
206 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
209 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
211 * ppc-opc.c (extract_nsi): make unsigned expression signed before
213 (UNUSED): remove one level of parens, so MSVC doesn't choke on
214 nesting depth when all the macros are expanded.
216 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
218 * sparc-opc.c: The fcmp v9a instructions take an integer register
219 as a destination, not a floating point register. From Christian
220 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
222 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
224 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
225 syntax. From Roman Hodek
226 <rnhodek@faui22c.informatik.uni-erlangen.de>.
228 * i386-dis.c (twobyte_has_modrm): Fix pand.
230 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
232 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
234 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
236 * arm-dis.c: Add prototypes for arm_decode_shift and
239 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
241 * mips-opc.c: Add r3900 insns.
243 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
245 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
246 print delay slot instructions on the same line. When using a PC
247 relative load, add a comment with the value being loaded if it can
250 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
252 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
253 to pushS/popS for segment regs and byte constant so that
254 pushw/popw printed when in 16 bit data mode.
256 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
257 print cbtw, cwtd in 16 bit data mode.
258 * i386-dis.c (putop): extra case W to support above.
260 * i386-dis.c (print_insn_x86): print addr32 prefix when given
261 address size prefix in 16 bit address mode.
263 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
265 * sh-dis.c: Reindent. Rename local variable fprintf to
268 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
270 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
272 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
274 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
276 * mips16-opc.c (mip16_opcodes): same.
278 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
280 * m68k-opc.c (moveb): Change $d to %d.
282 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
284 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
285 (twobyte_has_modrm): Likewise.
287 (OP_MMX, OP_EM, OP_MS): New static functions.
289 * i386-dis.c: Revert patch of April 4. The output now matches
292 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
294 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
297 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
299 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
301 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
303 * Makefile.in (install): Depend upon installdirs.
304 (installdirs): New target.
306 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
308 From Thomas Graichen <graichen@rzpd.de>:
309 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
310 * configure: Rebuild.
312 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
314 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
315 Delete string{,s}.h support.
317 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
319 * cgen-asm.c (cgen_parse_operand_fn): New global.
320 (cgen_parse_{{,un}signed_integer,address}): Update call to
321 cgen_parse_operand_fn.
322 (cgen_init_parse_operand): New function.
323 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
324 from cgen_asm_init_parse.
325 (m32r_cgen_assemble_insn): New operand `errmsg'.
326 Delete call to as_bad, return error message to caller.
327 (m32r_cgen_asm_hash_keywords): #if 0 out.
329 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
331 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
333 [case 'J']: Fix typo in register name.
335 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
337 * configure.in: Substitute SHLIB_LIBS.
338 * configure: Rebuild.
339 * Makefile.in (SHLIB_LIBS): New variable.
340 ($(SHLIB)): Use $(SHLIB_LIBS).
342 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
344 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
346 * cgen-opc.c (hash_keyword_name): Improve algorithm.
348 * disassemble.c (disassembler): Handle m32r.
350 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
352 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
353 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
354 * Makefile.in (CFILES): Add them.
355 (ALL_MACHINES): Add them.
356 (dependencies): Regenerate.
357 * configure.in (cgen_files): New variable.
358 (bfd_m32r_arch): Add entry.
359 * configure: Regenerate.
361 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
363 * configure.in: Correct file names for bfd_mn10[23]00_arch.
364 * configure: Rebuild.
366 * Makefile.in: Rebuild dependencies.
368 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
370 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
373 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
375 * Branched binutils 2.8.
377 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
379 * m10200-dis.c: Rename from mn10200-dis.c.
380 * m10200-opc.c: Rename from mn10200-opc.c.
381 * m10300-dis.c: Rename from mn10300-dis.c
382 * m10300-opc.c: Rename from mn10300-opc.c.
383 * Makefile.in: Update accordingly.
385 * mips16-opc.c: Add mul and dmul macros.
387 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
389 * makefile.vms: Update CFLAGS, add clean target.
391 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
393 * mips-opc.c: Add "wait". From Ralf Baechle
394 <ralf@gnu.ai.mit.edu>.
396 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
397 * configure, config.in: Rebuild.
398 * sysdep.h: Include <stdlib.h> if it exists.
399 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
401 * Makefile.in: Rebuild dependencies.
403 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
405 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
406 Andrew Bray <andy@madhouse.demon.co.uk>.
408 * mips-opc.c: Add cast when setting mips_opcodes.
410 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
412 * v850-dis.c (disassemble): Fix sign extension problem.
413 * v850-opc.c (extract_d*): Fix sign extension problems to make
414 disassembly calculate branch offsets correctly.
416 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
418 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
420 * mips-opc.c: Add dctr and dctw.
423 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
425 * d30v-dis.c (print_insn): Change the way signed constants
428 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
430 * Makefile.in (BFD_H): New variable.
431 (HFILES): New variable.
432 (CFILES): Add all C files.
433 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
434 Delete old dependencies, and build new ones.
435 * dep-in.sed: New file.
437 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
439 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
441 start-sanitize-coldfire
442 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
444 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
447 end-sanitize-coldfire
448 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
450 * mn10200-opc.c: Change "trap" to "syscall".
451 * mn10300-opc.c: Add new "syscall" instruction.
453 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
455 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
456 mulul insns on the coldfire.
458 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
460 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
461 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
462 (print_insn_little_arm): Likewise.
464 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
466 Based on patches from H.J. Lu <hjl@lucon.org>:
467 * i386-dis.c (fetch_data): Add prototype.
468 * m68k-dis.c (fetch_data): Add prototype.
469 (dummy_print_address): Add prototype. Make static.
470 * ppc-opc.c (valid_bo): Add prototype.
471 * sparc-dis.c (build_hash_table): Add prototype.
472 (is_delayed_branch, compute_arch_mask): Add prototypes.
473 (print_insn_sparc): Make several local variables const.
474 (compare_opcodes): Change arguments to const PTR. Add prototype.
475 * sparc-opc.c (arg): Change name field to be const.
476 (lookup_name, lookup_value): Add prototypes. Change table and
477 name parameters to be const.
478 (sparc_encode_asi): Change name parameter to be const.
479 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
480 (sparc_encode_sparclet_cpreg): Likewise.
481 (sparc_decode_asi): Change return type to be const.
482 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
483 (sparc_decode_sparclet_cpreg): Likewise.
485 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
487 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
488 Solaris doesn't like the combined options, and the -f is
490 (stamp-tshlink, install): Likewise.
492 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
494 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
497 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
499 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
501 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
503 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
506 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
508 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
511 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
513 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
515 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
517 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
520 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
522 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
523 floatformat_to_double to make portable.
524 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
527 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
529 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
530 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
532 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
534 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
535 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
538 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
540 * tic80-opc.c (LSI_SCALED): Renamed from this ...
541 (OFF_SL_BR_SCALED): ... to this, and added the flag
542 TIC80_OPERAND_BASEREL to the flags word.
543 (tic80_opcodes): Replace all occurances of LSI_SCALED with
547 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
549 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
550 Change mips_opcodes from const array to a pointer,
551 and change bfd_mips_num_opcodes from const int to int,
552 so that we can increase the size of the mips opcodes table
556 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
558 * tic80-opc.c (tic80_predefined_symbols): Revert change to
559 store BITNUM values in the table in one's complement form
560 to match behavior when assembler is given a raw numeric
561 value for a BITNUM operand.
562 * tic80-dis.c (print_operand_bitnum): Ditto.
566 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
568 * d30v-opc.c: Removed references to FLAG_X.
571 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
573 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
576 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
578 * Makefile.in: Added d30v object files.
579 * configure: (bfd_d30v_arch) Rebuilt.
580 * configure.in: (bfd_d30v_arch) Added new case.
581 * d30v-dis.c: New file.
582 * d30v-opc.c: New file.
583 * disassemble.c (disassembler) Add entry for d30v.
587 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
589 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
590 representations for the floating point BITNUM values.
592 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
594 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
595 in the table in one's complement form, as they appear in the
597 (tic80_symbol_to_value): Use macros to access predefined
599 (tic80_value_to_symbol): Ditto.
600 (tic80_next_predefined_symbol): New function.
601 * tic80-dis.c (print_operand_bitnum): Remove code that did
602 one's complement for BITNUM values.
606 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
608 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
611 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
613 * makefile.vms: Remove 8 bit characters. Update to latest
616 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
618 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
620 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
622 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
623 (IMM24_PCREL): Likewise.
625 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
627 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
628 address for an extended PC relative instruction that is not a
631 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
633 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
637 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
639 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
640 (tic80_opcodes): Sort entries so that long immediate forms
641 come after short immediate forms, making it easier for
642 assembler to select the right one for a given operand.
645 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
647 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
649 (print_insn_mips16): Likewise.
652 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
654 * mips-opc.c: add r5900.
658 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
660 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
661 a symbol class that restricts translation to just that
662 class (general register, condition code, etc).
664 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
666 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
667 and REG_DEST_E for register operands that have to be
668 an even numbered register. Add REG_FPA for operands that
669 are one of the floating point accumulator registers.
670 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
671 (tic80_opcodes): Change entries that need even numbered
672 register operands to use the new operand table entries.
673 Add "or" entries that are identical to "or.tt" entries.
676 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
678 * mips16-opc.c: Add new cases of exit instruction for
680 * mips-dis.c (print_mips16_insn_arg): Display floating point
681 registers in operands of exit instruction. Print `$' before
682 register names in operands of entry and exit instructions.
685 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
687 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
688 pairs for all predefined symbols recognized by the assembler.
689 Also used by the disassembling routines.
690 (tic80_symbol_to_value): New function.
691 (tic80_value_to_symbol): New function.
692 * tic80-dis.c (print_operand_control_register,
693 print_operand_condition_code, print_operand_bitnum):
694 Remove private tables and use tic80_value_to_symbol function.
697 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
699 * d10v-dis.c (print_operand): Change address printing
700 to correctly handle PC wrapping. Fixes PR11490.
702 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
704 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
707 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
709 * mips-dis.c (print_insn_mips16): Set insn_info information.
710 (print_mips16_insn_arg): Likewise.
712 * mips-dis.c (print_insn_mips16): Better handling of an extend
713 opcode followed by an instruction which can not be extended.
715 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
717 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
718 coldfire moveb instruction to not allow an address register as
719 destination. Although the documentation does not indicate that
720 this is invalid, experiments uncovered unexpected behavior.
721 Added a comment explaining the situation. Thanks to Andreas
722 Schwab for pointing this out to me.
725 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
727 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
728 entries are presorted so that entries with the same mnemonic are
729 adjacent to each other in the table. Sort the entries for each
730 instruction so that this is true.
733 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
735 * m68k-dis.c: Include <libiberty.h>.
736 (print_insn_m68k): Sort the opcode table on the most significant
737 nibble of the opcode.
740 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
742 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
743 "vsub", "vst", "xnor", and "xor" instructions.
744 (V_a1): Renamed from V_a, msb of accumulator reg number.
745 (V_a0): Add macro, lsb of accumulator reg number.
747 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
749 * tic80-dis.c (print_insn_tic80): Broke excessively long
750 function up into several smaller ones and arranged for
751 the instruction printing function to be callable recursively
752 to print vector instructions that have both a load and a
753 math instruction packed into a single opcode.
754 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
755 to explain why it comes after the other vector opcodes.
758 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
760 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
761 move insns to handle immediate operands.
763 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
765 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
766 fix operand mask in the "moveml" entries for the coldfire.
769 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
771 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
772 New macros for building vector instruction opcodes.
773 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
774 FMT_LI, which were unused. The field is now a flags field.
775 Remove some opcodes that are possible, but illegal, such
776 as long immediate instructions with doubles for immediate
777 values. Add "vadd" and "vld" instructions.
779 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
781 * tic80-opc.c (tic80_operands): Reorder some table entries to make
782 the order more logical. Move the shift alias instructions ("rotl",
783 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
784 interspersed with the regular sr.x and sl.x instructions. Add
785 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
786 "sub", "subu", "swcr", and "trap".
788 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
790 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
791 (OFF_SL_PC): Renamed from OFF_SL.
792 (OFF_SS_BR): New operand type for base relative operand.
793 (OFF_SL_BR): New operand type for base relative operand.
794 (REG_BASE): New operand type for base register operand.
795 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
796 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
797 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
799 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
800 10 char field, padded with spaces on rhs, rather than a string
801 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
802 than old TIC80_OPERAND_RELATIVE. Add support for new
803 TIC80_OPERAND_BASEREL flag bit.
805 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
807 * tic80-dis.c (print_insn_tic80): Print floating point operands
809 * tic80-opc.c (SPFI): Add single precision floating point
810 immediate operand type.
811 (ROTATE): Add rotate operand type for shifts.
812 (ENDMASK): Add for shifts.
813 (n): Macro for the 'n' bit.
814 (i): Macro for the 'i' bit.
815 (PD): Macro for the 'PD' field.
816 (P2): Macro for the 'P2' field.
817 (P1): Macro for the 'P1' field.
818 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
822 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
824 * mn10200-dis.c (disassemble): Mask off unwanted bits after
825 adding in current address for pc-relative operands.
828 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
830 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
831 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
832 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
833 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
834 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
835 REG_BASE_M_SI, REG_BASE_M_LI respectively.
836 (REG_SCALED, LSI_SCALED): New operand types.
837 (E): New macro for 'E' bit at bit 27.
838 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
839 opcodes, including the various size flavors (b,h,w,d) for
840 the direct load and store instructions.
842 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
844 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
846 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
847 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
848 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
849 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
850 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
851 masks with "MASK_* & ~M_*" to get the M bit reset.
852 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
854 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
856 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
857 correctly. Add support for printing TIC80_OPERAND_BITNUM and
858 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
860 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
861 CC, SICR, and LICR table entries.
862 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
863 "bcnd", and "brcr" opcodes.
866 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
868 * ppc-opc.c (powerpc_operands): Make comment match the
869 actual fields (no shift field).
870 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
872 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
873 partial implementation, work in progress.
874 * tic80-opc.c (tic80_operands): Begin construction operands table.
875 (tic80_opcodes): Continue populating opcodes table and start
876 filling in the operand indices.
877 (tic80_num_opcodes): Add this.
880 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
882 * m68k-opc.c: Add #B case for moveq.
884 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
886 * mn10300-dis.c (disassemble): Make sure all variables are initialized
887 before they are used.
889 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
891 * v850-opc.c (v850_opcodes): Put curly-braces around operands
892 for "breakpoint" instruction.
894 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
896 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
897 (dep): Use ALL_CFLAGS rather than CFLAGS.
899 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
901 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
904 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
906 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
908 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
911 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
913 * mips16-opc.c: Add "abs".
916 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
918 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
919 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
920 (disassembler): Add bfd_arch_tic80 support to set disassemble
922 * tic80-dis.c (print_insn_tic80): Add stub.
924 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
926 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
927 * configure: Regenerate with autoconf.
928 * tic80-dis.c: Add file.
929 * tic80-opc.c: Add file.
932 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
934 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
936 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
938 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
939 (mn10200_opcodes): Use it for some logicals and btst insns.
940 Add "break" and "trap" instructions.
942 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
944 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
946 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
948 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
949 relative load or add now depends upon whether the instruction is
952 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
954 * mn10200-dis.c: Finish writing disassembler.
955 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
956 Fix mask for "jmp (an)".
958 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
959 handle endianness issues for mn10300.
961 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
963 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
965 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
966 instruction. Fix opcode field for "movb (imm24),dn".
968 * mn10200-opc.c (mn10200_operands): Fix insertion position
971 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
973 * mn10200-opc.c: Create mn10200 opcode table.
974 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
975 but moving along nicely.
977 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
979 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
981 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
983 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
984 specifiers for fmovem* instructions.
986 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
988 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
990 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
992 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
995 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
997 * mn10300-opc.c: Add some comments explaining the various
1000 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1002 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1004 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1007 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1008 operand specifiers in fmovm* instructions.
1010 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1012 * ppc-opc.c (insert_li): Give an error if the offset has the two
1013 least significant bits set.
1015 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1017 * mips-dis.c (print_insn_mips16): Separate the instruction from
1018 the arguments with a tab, not a space.
1020 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1022 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1025 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1028 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1030 * configure: Rebuild with autoconf 2.12.
1032 Add support for mips16 (16 bit MIPS implementation):
1033 * mips16-opc.c: New file.
1034 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1035 (mips16_reg_names): New static array.
1036 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1037 after seeing a 16 bit symbol.
1038 (print_insn_little_mips): Likewise.
1039 (print_insn_mips16): New static function.
1040 (print_mips16_insn_arg): New static function.
1041 * mips-opc.c: Add jalx instruction.
1042 * Makefile.in (mips16-opc.o): New target.
1043 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1044 * configure: Rebuild.
1046 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1048 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1049 operand specifiers in *save, *restore and movem* instructions.
1051 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1054 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1055 register operands for immediate arithmetic, not, neg, negx, and
1056 set according to condition instructions.
1058 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1059 specifier of the effective-address operand in immediate forms of
1060 arithmetic instructions. The specifier for the immediate operand
1061 notes how and where the constant will be stored.
1063 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1065 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1068 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1071 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1073 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1075 * mn10300-dis.c (disassemble): Handle register lists.
1077 * mn10300-opc.c: Fix handling of register list operand for
1078 "call", "ret", and "rets" instructions.
1080 * mn10300-dis.c (disassemble): Print PC-relative and memory
1081 addresses symbolically if possible.
1082 * mn10300-opc.c: Distinguish between absolute memory addresses,
1083 pc-relative offsets & random immediates.
1085 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1087 (disassemble): Handle SPLIT and EXTENDED operands.
1089 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1091 * mn10300-dis.c: Rough cut at printing some operands.
1093 * mn10300-dis.c: Start working on disassembler support.
1094 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1096 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1098 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1100 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1102 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1104 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1106 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1107 register argument is calls and jmp instructions.
1109 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1111 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1112 getx operand. Fix opcode for mulqu imm,dn.
1114 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1116 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1117 in MN10300_OPERAND_SPLIT operands for how many bits
1118 appear in the basic insn word. Add IMM32_HIGH24,
1119 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1120 (mn10300_opcodes): Use new operands as needed.
1122 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1123 for bset, bclr, btst instructions.
1124 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1126 * mn10300-opc.c (mn10300_operands): Remove many redundant
1127 operands. Update opcode table as appropriate.
1128 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1129 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1131 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1133 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1134 operands (for indexed load/stores). Fix bitpos for DI
1135 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1136 few instructions that insert immediates/displacements in the
1137 middle of the instruction. Add IMM8E for 8 bit immediate in
1138 the extended part of an instruction.
1139 (mn10300_operands): Use new opcodes as appropriate.
1141 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1143 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1144 sequential so the assembler never parallelizes it with
1147 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1149 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1150 a data/address register that appears in register field 0
1151 and register field 1.
1152 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1154 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1156 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1157 standard disassembly.
1159 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1160 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1161 Recategorize PALcode instructions.
1163 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1165 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1167 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1169 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1170 there are no operand types.
1172 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1174 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1176 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1178 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1180 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1182 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1184 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1185 and sst.w instructions.
1187 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1190 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1192 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1195 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1197 * ppc-opc.c (PPCPWR2): Define.
1198 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1201 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1203 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1204 field for movhu instruction.
1206 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1207 cast value to "long" not "signed long" to keep hpux10
1210 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1212 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1215 * mn10300-opc.c (FMT*): Remove definitions.
1217 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1218 for shift-by-register opcodes.
1220 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1221 into [AD][MN][01] for encoding the position of the register
1224 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1226 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1227 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1229 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1231 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1232 Fix various typos. Add "PAREN" operand.
1233 (MEM, MEM2): Define.
1234 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1235 operands. Fix several typos.
1237 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1240 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1242 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1243 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1245 (mn10300_opcodes): Break opcode format out into its own field.
1246 Update many operand fields to deal with signed vs unsigned
1247 issues. Fix one or two typos in the "mov" instruction
1248 opcode, mask and/or operand fields.
1250 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1252 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1253 m68851 wasn't reset.
1255 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1257 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1258 all opcodes. Very rough cut at operands for all opcodes.
1260 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1263 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1265 * mn10200-opc.c, mn10300-opc.c: New files.
1266 * mn10200-dis.c, mn10300-dis.c: New files.
1267 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1268 * disassemble.c: Break mn10x00 support into 10200 and 10300
1270 * configure.in: Likewise.
1271 * configure: Rebuilt.
1273 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1275 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1277 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1279 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1281 * disassemble (ARCH_mn10x00): Define.
1282 (disassembler): Handle bfd_arch_mn10x00.
1283 * configure.in: Recognize bfd_mn10x00_arch.
1284 * configure: Rebuilt.
1286 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1288 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1289 accordingly. Don't declare functions using op_rtn.
1291 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1293 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1294 params to be more standard.
1295 * (disassemble): Print absolute addresses and symbolic names for
1296 branch and jump targets.
1297 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1299 * (v850_opcodes): Add breakpoint insn.
1301 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1303 * m68k-opc.c: Move the fmovemx data register cases before the
1304 other cases, so that they get recognized before the data register
1305 does gets treated as a degenerate register list.
1307 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1309 * mips-opc.c: Add a case for "div" and "divu" with two registers
1310 and a destination of $0.
1312 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1314 * mips-dis.c (print_insn_arg): Add prototype.
1315 (_print_insn_mips): Ditto.
1317 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1319 * mips-dis.c (print_insn_arg): Print condition code registers as
1322 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1324 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1326 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1328 * v850-dis.c (disassemble): Make static. Provide prototype.
1330 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1332 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1335 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1337 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1338 ']' characters into the output stream.
1339 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1340 Add "memop" field to all opcodes (for the disassembler).
1341 Reorder opcodes so that "nop" comes before "mov" and "jr"
1342 comes before "jarl".
1344 * v850-dis.c (print_insn_v850): Fix typo in last change.
1346 * v850-dis.c (print_insn_v850): Properly handle disassembling
1347 a two byte insn at the end of a memory region when the memory
1348 region's size is only two byte aligned.
1350 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1352 * v850-dis.c (v850_reg_names): Define.
1353 (v850_sreg_names, v850_cc_names): Likewise.
1354 (disassemble): Very rough cut at printing operands (unformatted).
1356 * v850-opc.c (BOP_MASK): Fix.
1357 (v850_opcodes): Fix mask for jarl and jr.
1359 * v850-dis.c: New file. Skeleton for disassembler support.
1360 * Makefile.in Remove v850 references, they're not needed here
1361 and they weren't being sanitized away.
1362 * configure.in: Add v850-dis.o when building v850 toolchains.
1363 * configure: Rebuilt.
1364 * disassemble.c (disassembler): Call v850 disassembler.
1366 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1367 (insert_d8_6, extract_d8_6): New functions.
1368 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1369 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1371 (IF4A, IF4B): Use "D7" instead of "D7S".
1372 (IF4C, IF4D): Use "D8_7" instead of "D8".
1373 (IF4E, IF4F): New. Use "D8_6".
1374 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1375 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1377 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1378 (v850_operands): Change D16 to D16_15, use special insert/extract
1379 routines. New new D16 that uses the generic insert/extract code.
1380 (IF7A, IF7B): Use D16_15.
1381 (IF7C, IF7D): New. Use D16.
1382 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1384 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1385 message. Issue an error if the branch offset is odd.
1387 * v850-opc.c: Add notes about needing special insert/extract
1388 for all the load/store insns, except "ld.b" and "st.b".
1390 * v850-opc.c (insert_d22, extract_d22): New functions.
1391 (v850_operands): Use insert_d22 and extract_d22 for
1393 (insert_d9): Fix range check.
1395 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1397 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1398 and set bits field to D9 and D22 operands.
1400 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1402 * v850-opc.c (v850_operands): Define SR2 operand.
1403 (v850_opcodes): "ldsr" uses R1,SR2.
1405 * v850-opc.c (v850_opcodes): Fix opcode specs for
1406 sld.w, sst.b, sst.h, sst.w, and nop.
1408 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1410 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1411 end of the opcode table.
1413 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1415 * d10v-opc.c (pre_defined_registers): Added register pairs,
1416 "r0-r1", "r2-r3", etc.
1418 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1420 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1421 Create I16U for an unsigned 16bit mmediate operand.
1422 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1424 * v850-opc.c (v850_operands): Define EP operand.
1425 (IF4A, IF4B, IF4C, IF4D): Use EP.
1427 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1428 with immediate operand, "movhi". Tweak "ldsr".
1430 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1431 correct. Get sld.[bhw] and sst.[bhw] closer.
1433 * v850-opc.c (v850_operands): "not" is a two byte insn
1435 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1437 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1439 * v850-opc.c (two): Get order of words correct.
1441 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1443 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1444 register source and destination operands.
1445 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1447 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1448 same thinko in "trap" opcode.
1450 * v850-opc.c (v850_opcodes): Add initializer for size field
1453 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1454 Add D8 for 8-bit unsigned field in short load/store insns.
1455 (IF4A, IF4D): These both need two registers.
1456 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1457 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1458 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1459 for "ldsr" and "stsr".
1460 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1463 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1464 short store word (sst.w).
1466 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1468 * v850-opc.c (v850_operands): Added insert and extract fields,
1469 pointers to functions that handle unusual operand encodings.
1471 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1473 * v850-opc.c (v850_opcodes): Enable "trap".
1475 * v850-opc.c (v850_opcodes): Fix order of displacement
1476 and register for "set1", "clr1", "not1", and "tst1".
1478 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1480 * v850-opc.c (v850_operands): Add "B3" support.
1481 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1484 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1486 * v850-opc.c: Close unterminated comment.
1488 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1490 * v850-opc.c (v850_operands): Add flags field.
1491 (v850_opcodes): add move opcodes.
1493 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1495 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1496 * configure: (bfd_v850v_arch) Add new case.
1497 * configure.in: (bfd_v850_arch) Add new case.
1498 * v850-opc.c: New file.
1500 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1502 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1504 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1506 * d10v-opc.c: Add additional information to the opcode
1507 table to help determinine which instructions can be done
1510 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1512 * mpw-make.sed: Update editing of include pathnames to be
1515 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1517 * arm-opc.h: Added "bx" instruction definition.
1519 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1521 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1523 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1525 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1527 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1529 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1531 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1533 * makefile.vms: Update for alpha-opc changes.
1535 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1537 * i386-dis.c (print_insn_i386): Actually return the correct value.
1538 (ONE, OP_ONE): #ifdef out; not used.
1540 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1542 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1543 Changed subi operand type to treat 0 as 16.
1545 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1547 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1550 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1552 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1553 memory transfer instructions. Add new format string entries %h and %s.
1554 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1557 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1559 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1560 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1562 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1564 * alpha-dis.c (print_insn_alpha_osf): Remove.
1565 (print_insn_alpha_vms): Remove.
1566 (print_insn_alpha): Make globally visible. Chose the register
1567 names based on info->flavour.
1568 * disassemble.c: Always return print_insn_alpha for the alpha.
1570 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1572 * d10v-dis.c (dis_long): Handle unknown opcodes.
1574 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1576 * d10v-opc.c: Changes to support signed and unsigned numbers.
1577 All instructions with the same name that have long and short forms
1578 now end in ".l" or ".s". Divs added.
1579 * d10v-dis.c: Changes to support signed and unsigned numbers.
1581 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1583 * d10v-dis.c: Change all functions to use info->print_address_func.
1585 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1587 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1588 move ccr/sr insns more strict so that the disassembler only
1589 selects them when the addressing mode is data register.
1591 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1592 * d10v-opc.c (pre_defined_registers): Declare.
1593 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1594 to pick a better name for the registers.
1596 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1598 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1599 operands for fexpand and fpmerge. From Christian Kuehnke
1600 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1602 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1604 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1605 print routine. Take new regnames and cpumask arguments.
1606 Kill the environment variable nonsense.
1607 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1608 (print_insn_alpha_vms): New function. Do VMS style regnames.
1609 * disassemble.c (disassembler): Test bfd flavour to pick
1610 between OSF and VMS routines. Default to OSF.
1612 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1614 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1615 * configure: Rebuild.
1616 * Makefile.in (install): Use @INSTALL_SHLIB@.
1618 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1620 * configure: (bfd_d10v_arch) Add new case.
1621 * configure.in: (bfd_d10v_arch) Add new case.
1622 * d10v-dis.c: New file.
1623 * d10v-opc.c: New file.
1624 * disassemble.c (disassembler) Add entry for d10v.
1626 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1628 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1629 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1631 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1633 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1634 distinguish between variants of the instruction set.
1635 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1636 distinguish between variants of the instruction set.
1638 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1640 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1641 the 8086 instruction set.
1642 * i386-dis.c: General cleanups. Make most things static. Add
1643 prototypes. Get rid of static variables aflags and dflags. Pass
1644 them as args (to almost everything).
1646 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1648 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1650 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1652 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1653 if the next arg is marked with SRC_IN_DST. Gross.
1655 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1656 we're looking for and find EXR.
1658 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1659 if we're looking for KBIT and we don't find it.
1661 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1664 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1665 3bit immediate operands.
1667 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1669 * Released binutils 2.7.
1671 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1672 <kkaempf@progis.ac-net.de>.
1674 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1676 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1678 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1680 * sparc-dis.c (print_insn_sparclite): New routine to print
1681 sparclite instructions.
1683 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1685 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1687 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1689 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1690 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1691 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1693 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1695 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1696 Use autoconf-set values.
1697 (docdir, oldincludedir): Removed.
1698 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1700 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1702 * alpha-opc.c: New file.
1703 * alpha-opc.h: Remove.
1704 * alpha-dis.c: Complete rewrite to use new opcode table.
1705 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1706 * configure: Rebuild with autoconf 2.10.
1707 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1708 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1710 (alpha-opc.o): New target.
1712 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1714 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1715 Set imm_added_to_rs1 even if the source and destination register
1718 * sparc-opc.c: Add some two operand forms of the wr instruction.
1720 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1722 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1725 * disassemble.c (disassembler): Handle H8/S.
1726 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1728 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1730 * sparc-opc.c: Add beq/teq as aliases for be/te.
1732 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1733 <sergei@msil.sps.mot.com>.
1735 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1737 * makefile.vms: New file.
1739 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1741 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1743 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1746 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1748 * i386-dis.c (OP_OFF): Call append_prefix.
1750 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1752 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1753 unsigned long to silence a warning from the Solaris PowerPC
1756 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1758 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1760 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1762 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1764 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1765 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1766 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1767 cpush, cpusha, cpull sparclet insns.
1769 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1771 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1773 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1775 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1776 Set F_FLOAT on other floating point instructions.
1778 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1780 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1782 (powerpc_opcodes): Add 860/821 specific SPRs.
1784 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1786 * configure.in: Permit --enable-shared to specify a list of
1787 directories. Set and substitute BFD_PICLIST.
1788 * configure: Rebuild.
1789 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1790 uses. Set to @BFD_PICLIST@.
1792 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1794 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1795 not "abs", which may be needed for the absolute in something
1796 like btst #0,@10:8. Print L_3 immediates separately from other
1797 immediates. Change ABSMOV reference to ABS8MEM.
1799 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1801 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1802 (current_arch_mask): New static global.
1803 (compute_arch_mask): New static function.
1804 (print_insn_sparc): Delete sparc_v9_p. New static local
1805 current_mach. Resort opcode table if current_mach changes.
1806 Generalize "insn not supported" test.
1807 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1808 Delete test for v9/!v9.
1809 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1811 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1812 (brfcx): Renamed to FBRX.
1813 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1814 coprocessor mnemonics are not supported on the sparclet).
1815 (condf): Renamed to CONDF.
1816 (SLCBCC2): Delete F_ALIAS flag.
1818 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1820 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1821 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1823 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1825 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1826 that the shared library version number is set correctly.
1828 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1830 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1831 Miles Bader <miles@gnu.ai.mit.edu>.
1832 * configure: Rebuild.
1834 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1836 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1839 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1841 * configure: Rebuild with autoconf 2.8.
1843 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1845 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1846 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1848 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1850 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1851 since they appear as targets in Makefile.in.
1852 * configure: Rebuild.
1854 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1856 * mpw-make.sed: Edit out shared library support bits.
1858 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1860 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1861 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1862 (sparc_opcodes): Add sparclet insns.
1863 (sparclet_cpreg_table): New static local.
1864 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1865 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1867 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1869 * i386-dis.c (index16): New static variable.
1870 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1872 (OP_indirE): Return result of OP_E.
1873 (OP_E): Check for 16 bit addressing mode, and disassemble
1874 correctly. Optimised 32 bit case a little. Don't print
1875 "(base,index,scale)" when sib specifies only an offset.
1877 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1879 * configure.in: Set and substitute SHLIB_DEP.
1880 * configure: Rebuild.
1881 * Makefile.in (SHLIB_DEP): New variable.
1882 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1883 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1884 COMMON_SHLIB, add them to piclist with appropriate modifications.
1885 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1886 here: just use piclist.
1888 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1890 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1891 (print_insn_sparc): Rewrite v9/not-v9 tests.
1892 (compare_opcodes): Likewise.
1893 * sparc-opc.c (MASK_<ARCH>): Define.
1894 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1895 (sparclet,v6notv9): Define.
1896 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1897 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1899 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1901 * configure.in: Call AC_PROG_CC before configure.host.
1902 * configure: Rebuild.
1904 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1906 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1908 * i386-dis.c (onebyte_has_modrm): New static array.
1909 (twobyte_has_modrm): New static array.
1910 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1912 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1914 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1917 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1919 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1922 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1924 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1925 m68010up, not just m68020up | cpu32.
1927 * Makefile.in (SONAME): New variable.
1928 ($(SHLINK)): Make a link to the transformed name, as well.
1929 (stamp-tshlink): New target.
1930 (install): Skip stamp-tshlink during install.
1932 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1934 * configure.in: Call AC_ARG_PROGRAM.
1935 * configure: Rebuild.
1936 * Makefile.in (program_transform_name): New variable.
1937 (install): Transform library name before installing it.
1939 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1941 * i960-dis.c (mem): Add HX dcinva instruction.
1943 Support for building as a shared library, based on patches from
1944 Alan Modra <alan@spri.levels.unisa.edu.au>:
1945 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1946 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1947 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1948 * configure: Rebuild.
1949 * Makefile.in (ALLLIBS): New variable.
1950 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1951 (COMMON_SHLIB, SHLINK): New variables.
1952 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1953 (STAGESTUFF): Remove variable.
1954 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1955 (stamp-piclist, piclist): New targets.
1956 ($(SHLIB), $(SHLINK)): New targets.
1957 ($(OFILES)): Depend upon stamp-picdir.
1958 (disassemble.o): Build twice if PICFLAG is set.
1959 (MOSTLYCLEAN): Add pic/*.o.
1960 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1961 (distclean): Remove pic and stamp-picdir.
1962 (install): Install shared libraries.
1963 (stamp-picdir): New target.
1965 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1967 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1968 Print unknown instruction as "unknown", rather than in hex.
1970 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1972 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1974 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1976 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1978 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1980 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1981 when necessary. From Ulrich Drepper
1982 <drepper@myware.rz.uni-karlsruhe.de>.
1984 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1986 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1987 sparc_num_opcodes. Update architecture enum values.
1988 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1989 (sparc_opcode_lookup_arch): New function.
1990 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1991 (sparc_opcodes): Add v9a shutdown insn.
1993 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1995 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1996 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1998 (print_insn_sparc64): Deleted.
1999 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2002 * sparc-opc.c (architecture_pname): Add v9a.
2004 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2006 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2007 incorrectly defined as 0x16 when it should be 0x15.
2008 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2009 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2010 excb (exception barrier) which is defined in the Alpha
2011 Architecture Handbook version 2.
2012 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2013 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2014 disassembled as or, for example.
2016 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2018 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2019 (_print_insn_mips): Change i from int to unsigned int.
2021 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2023 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2024 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2026 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2028 * i386-dis.c: Added Pentium Pro instructions.
2030 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2032 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2035 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2037 * sh-opc.h (sh_nibble_type): Added REG_B.
2038 (sh_arg_type): Added A_REG_B.
2039 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2041 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2043 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2045 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2047 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2049 * Makefile.in (distclean): Remove stamp-h. From Ronald
2050 F. Guilmette <rfg@monkeys.com>.
2052 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2054 From David Mosberger-Tang <davidm@azstarnet.com>:
2055 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2058 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2060 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2061 (sh_table): Added many SH3 opcodes.
2062 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2064 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2066 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2067 (subco,subco.): Mark this PPC, not PPCCOM.
2069 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2071 * configure: Rebuild with autoconf 2.7.
2073 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2075 * configure: Rebuild with autoconf 2.6.
2077 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2079 * configure.in: Sort list of architectures. Accept but do nothing
2080 for alliant, convex, pyramid, romp, and tahoe.
2082 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2084 * a29k-dis.c (print_special): Change num to unsigned int.
2086 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2088 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2091 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2093 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2094 * configure: Rebuilt.
2096 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2098 * configure.in: Add case for bfd_i860_arch.
2099 * configure: Rebuild.
2101 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2103 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2104 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2105 (NEXTDOUBLE): Likewise.
2106 (print_insn_m68k): Don't match fmoveml if there is more than one
2107 register in the list.
2108 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2110 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2112 * m68k-opc.c: Use #W rather than #w.
2113 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2115 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2117 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2118 and likewise for all the dbxx opcodes.
2120 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2122 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2124 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2126 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2127 the VR4100 specific instructions to the mips_opcodes structure.
2129 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2131 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2132 ugly Metrowerks bug in CW6, is fixed in CW7.
2134 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2136 * ppc-opc.c (whole file): Add flags for common/any support.
2138 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2140 * Makefile.in (BISON): Remove macro.
2141 (FLAGS_TO_PASS): Remove BISON.
2143 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2145 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2147 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2148 instructions that take no args by looking at the match mask.
2149 (print_insn_arg): Always print "%" before register names.
2150 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2151 [case '_']: Don't print "@#" before address.
2152 [case 'J']: Use "%s" as format string, not register name.
2153 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2155 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2157 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2160 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2162 From David Mosberger-Tang <davidm@azstarnet.com>
2164 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2165 (alpha_insn_set): added definitions for VAX floating point
2166 instructions (Unix compilers don't generate these, but handcoded
2167 assembly might still use them).
2169 * alpha-dis.c (print_insn_alpha): added support for disassembling
2170 the miscellaneous instructions in the Alpha instruction set.
2172 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2174 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2175 no longer create sysdep.h, sed ppc-opc.c to work around a
2176 serious Metrowerks C bug.
2177 * mpw-make.in: Remove.
2178 * mpw-make.sed: New file, used by mpw-configure to edit
2179 Makefile.in into an MPW makefile.
2181 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2183 * Makefile.in (maintainer-clean): New synonym for realclean.
2185 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2187 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2188 which use '0', '1', and '2' instead. Specify the proper size for
2189 a pmove immediate operand. Correct the pmovefd patterns to be
2190 moves to a register, not from a register.
2191 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2193 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2195 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2196 %psr, %wim, %tbr as F_NOTV9.
2198 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2200 * Makefile.in (Makefile): Just rebuild Makefile when running
2202 (config.h, stamp-h): New targets.
2203 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2204 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2205 rebuilding config.h.
2206 * configure: Rebuild.
2208 * mips-opc.c: Change unaligned loads and stores with "t,A"
2209 operands to use "t,A(b)".
2211 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2213 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2215 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2217 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2218 until 3 instead of until 2.
2220 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2222 * Makefile.in (ALL_CFLAGS): Define.
2223 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2224 (MOSTLYCLEAN): Add config.log.
2225 (distclean): Don't remove config.log.
2226 * configure.in: Substitute HDEFINES.
2227 * configure: Rebuild.
2229 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2231 * sh-opc.h (sh_arg_type): Add F_FR0.
2232 (sh_table, case fmac): Add F_FR0 as first argument.
2234 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2236 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2238 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2240 * sparc-dis.c: Remove all references to NO_V9.
2242 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2244 * aclocal.m4: Just include ../bfd/aclocal.m4.
2245 * configure: Rebuild.
2247 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2249 * sparc-dis.c (X_DISP19): Define.
2250 (print_insn, case 'G'): Use it.
2251 (print_insn, case 'L'): Sign extend displacement.
2253 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2255 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2256 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2257 host_makefile_frag or frags.
2258 * aclocal.m4: New file.
2259 * configure: Rebuild.
2260 * Makefile.in (INSTALL): Set to @INSTALL@.
2261 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2262 (INSTALL_DATA): Set to @INSTALL_DATA@.
2264 (AR_FLAGS): Set to rc rather than qc.
2265 (CC): Define as @CC@.
2266 (CFLAGS): Set to @CFLAGS@.
2267 (@host_makefile_frag@): Remove.
2268 (config.status): Remove dependency upon @frags@.
2270 * configure.in: ../bfd/config.bfd now just sets shell variables.
2271 Use them rather than looking through target Makefile fragments.
2272 * configure: Rebuild.
2274 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2276 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2278 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2280 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2281 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2284 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2285 (lookup_{name,value}): New functions.
2286 (prefetch_table): New static local.
2287 (sparc_{encode,decode}_prefetch): New functions.
2288 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2290 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2292 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2295 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2297 * sh-dis.c: Correct comment on first line of file.
2299 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2301 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2303 * sparc-opc.c (asi, membar): New static locals.
2304 (sparc_{encode,decode}_{asi,membar}): New functions.
2305 (sparc_opcodes, membar insn): Fix.
2306 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2307 Support decoding of membar masks.
2310 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2312 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2314 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2316 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2317 and likewise for the other branches. Add bhs as an alias for bcc,
2318 and likewise for the size variants. Add dbhs as an alias for
2321 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2323 * sh-opc.h (FP sts instructions): Update to match reality.
2325 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2327 * m68k-dis.c: (fpcr_names): Add % before all register names.
2328 (reg_names): Likewise.
2329 (print_insn_arg): Don't explicitly print % before register names.
2330 Add % before register names in static array names. In case 'r',
2331 print data registers as `@(Dn)', not `Dn@'. When printing a
2332 memory address, don't print @# before it.
2333 (print_indexed): Change base_disp and outer_disp from int to
2334 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2335 syntax. Sign extend 8 byte displacement correctly.
2336 (print_base): Print using MIT syntax. Print zpc when appropriate.
2337 Change parameter disp from int to bfd_vma.
2339 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2342 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2344 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2345 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2346 * sh-opc.h (sh_arg_type): Add new operand types.
2347 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2349 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2351 * Makefile.in (distclean): Remove generated file config.h.
2353 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2355 * Makefile.in (distclean): Remove generated file config.h.
2357 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2359 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2361 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2363 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2364 rather than numopcodes. Use m68k_opcodes rather than removed
2365 opcode function. Don't check F_ALIAS.
2366 (print_insn_arg): Change first parameter to be const char *.
2367 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2368 (m68k-opc.o): New target.
2369 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2370 * configure: Rebuild.
2372 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2374 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2375 (opcode_bits, opcode_hash_table): New variables.
2376 (opcodes_initialized): Renamed from opcodes_sorted.
2377 (build_hash_table): New function.
2378 (is_delayed_branch): Use hash table.
2379 (print_insn): Renamed from print_insn_sparc, made static.
2380 Build and use hash table. If !sparc64, ignore sparc64 insns,
2381 and vice-versa if sparc64.
2382 (print_insn_sparc, print_insn_sparc64): New functions.
2383 (compare_opcodes): Move sparc64 opcodes to end.
2384 Print commutative insns with constant second.
2385 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2387 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2389 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2390 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2391 avoids printing a delay slot in a delay slot.
2392 * sh-opc.h (sh_table): Fully bracket last entry.
2394 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2396 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2398 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2400 * configure.in: Get host_makefile_frag from ${srcdir}.
2402 * configure.in: Autoconfiscated. Check for string[s].h. Create
2403 config.h from config.in. Don't set up sysdep.h link.
2404 * sysdep.h: New file.
2405 * configure, config.in: New files, generated from configure.in.
2406 * Makefile.in: Updated to be processed autoconf-style.
2407 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2408 (Makefile): Depend on config.status.
2409 (config.status): New rule.
2410 * configure.bat: Update Makefile substitutions.
2412 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2414 * mips-opc.c (L1): Define.
2415 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2416 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2419 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2421 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2422 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2423 have multiple add units but only a single logical unit.
2425 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2426 shifted by 18, without any insertion or extraction function.
2427 (insert_cr, extract_cr): Remove.
2429 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2431 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2434 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2436 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2437 * sh-opc.h: Add copyright.
2439 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2441 * Makefile.in (crunch-m68k): Delete extra target accidentally
2442 checked in a while ago.
2444 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2446 * sh-opc.h (sh_table): Add SH3 support.
2448 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2450 * sh-opc.h: Added bsrf and braf.
2452 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2454 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2455 bogus [ls]fm{ea,fd} patterns.
2457 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2458 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2459 initialize it from memory. Make function static.
2460 (print_insn_{big,little}_arm): New functions.
2461 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2462 the correct endianness.
2464 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2466 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2469 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2471 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2472 17th, so that it builds again using GCC as the compiler.
2474 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2476 * mips-dis.c (print_insn_little_mips): Cast return value from
2477 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2478 expects an unsigned long, and that might be fewer words of
2479 argument storage (e.g., if bfd_vma is long long on a 32-bit
2481 (print_insn_big_mips): Likewise with bfd_getb32 value.
2482 (_print_insn_mips): Now static.
2484 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2486 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2487 gcc memory hog problem with initializer is fixed.
2489 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2491 Merge in support for Mac MPW as a host.
2492 (Old change descriptions retained for informational value.)
2494 * mpw-config.in (archname): Compute from the config.
2495 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2497 * mpw-config.in (target_arch): Compute from canonical target.
2498 (m68k, mips, powerpc, sparc): Add architectures.
2499 * mpw-make.in (disassemble.c.o): Add.
2500 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2502 * mpw-config.in (BFD_MACHINES): Set to a default value.
2503 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2505 * mpw-make.in (CSEARCH): Add extra-include to search path.
2507 * mpw-config.in (varargs.h): Don't create.
2508 (sysdep.h): Create using forward-include.
2509 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2511 * mpw-config.in: New file, MPW version of configure.in.
2512 * mpw-make.in: New file, MPW version of Makefile.in.
2514 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2516 * alpha-dis.c (print_insn_alpha): Put empty statement after
2519 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2521 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2522 (low_sign_extend): Likewise.
2523 (get_field): Delete unused function.
2524 (set_field, deposit_14, deposit_21): Likewise.
2526 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2528 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2531 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2533 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2535 * alpha-opc.h (OSF_ASMCODE): define
2536 print pal-code names as defined in App C of the
2537 Alpha Architecture Reference Manual
2539 * alpha-dis.c: cleaned up output
2540 print stylized code forms as defined in App A.4.3 of the
2541 Alpha Architecture Reference Manual
2543 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2545 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2547 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2550 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2552 * m68k-dis.c (opcode): New function. Returns address of opcode
2553 table entry given index, even if the opcode table was split to
2554 work around gcc bugs.
2555 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2557 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2558 (reg_names): Now const.
2559 (print_insn_arg): Arrays cacheFieldName and names now const.
2560 (print_indexed): Array scales now const.
2562 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2564 * ppc-opc.c: Sort recently added instructions by minor opcode
2565 number within major opcode number.
2567 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2569 * hppa-dis.c: Include libhppa.h.
2571 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2573 * mips-opc.c: Change dli to use M_DLI, and add dla.
2575 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2577 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2579 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2581 * mips-opc.c: Add r4650 mul instruction.
2583 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2585 * mips-opc.c: Add uld and usd macros for unaligned double load and
2588 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2590 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2591 mfdcr, mtdcr, icbt, iccci.
2593 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2595 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2596 signed char fields to shorts, more portable.
2598 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2600 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2601 char fields as signed chars, since they may have negative values.
2603 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2605 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2606 (mycroft@netbsd.org).
2608 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2610 From "Logg, Ed" <elogg@ea.com>:
2611 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2612 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2615 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2617 * ppc-opc.c: Changes based on patch from David Edelsohn
2618 <edelsohn@mhpcc.edu>.
2619 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2622 (insert_tbr): New static function.
2623 (extract_tbr): New static function.
2624 (XFXFXM_MASK, XFXM): Define.
2625 (XSPRBAT_MASK, XSPRG_MASK): Define.
2626 (powerpc_opcodes): Add instructions to access special registers by
2627 name. Add mtcr and mftbu.
2629 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2631 * mips-opc.c (P3): Define.
2632 (mips_opcodes): Add mad and madu.
2634 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2636 * configure.in: Add W65 support.
2637 * disassemble.c: Likewise.
2638 * w65-opc.h, w65-dis.c: New files.
2640 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2642 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2645 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2647 * mips-opc.c: Add dli as a synonym for li.
2649 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2651 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2652 print something for reserved opcode values, even if it won't
2655 * mips-dis.c (_print_insn_mips): When initializing, shift right
2656 and mask, to avoid sign extension problems on the Alpha.
2658 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2661 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2663 * sh-opc.h (mov.l gbr): Get direction right.
2664 * sh-dis.c (print_insn_shx): New function.
2665 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2666 print opcodes with right byte order.
2668 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2670 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2671 to avoid conflicts with getopt.
2673 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2675 * hppa-dis.c (print_insn_hppa): Read the instruction using
2676 bfd_getb32, so that it works on a little endian or 64 bit host.
2677 Remove unused local variable op.
2679 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2681 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2682 addu does not work correctly if -mips3.
2684 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2686 * a29k-dis.c (print_special): Add special register names defined
2687 on 29030, 29040 and 29050.
2688 (print_insn): Handle new operand type 'I'.
2690 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2692 * Makefile.in (INSTALL): Use top level install.sh script.
2694 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2696 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2697 that it works on a little endian host.
2699 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2701 * configure.in: Use ${config_shell} when running config.bfd.
2703 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2705 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2707 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2709 * a29k-dis.c (print_insn): Print the opcode.
2711 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2713 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2715 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2717 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2719 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2721 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2722 which store a value into memory.
2724 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2726 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2727 * arm-dis.c, arm-opc.h: New files.
2729 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2731 * Makefile.in (ns32k-dis.o): Add dependency.
2732 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2733 string, not as array of chars.
2735 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2737 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2739 * sparc-opc.c: Added sparclite extended FP operations, and
2740 versions of v9 impdep* instructions permitting specification of
2743 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2745 * i960-dis.c (reg_names): Now const.
2746 (struct sparse_tabent): New type, copied from array type in mem
2748 (ctrl): Local static array ctrl_tab now const.
2749 (cobr): Local static array cobr_tab now const.
2750 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2751 static variable mem_tab no longer explicitly initialized. Changed
2752 mem_init to const array of struct sparse_tabent.
2753 (reg): Local static variable reg_tab no longer explicitly
2754 initialized. Changed reg_init to const array of struct
2756 (ea): Local static array scale_tab now const.
2758 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2761 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2763 * configure.bat: the disassember needs to be enabled for
2764 "objdump -d" to work in djgpp.
2766 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2768 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2769 (invalid_float): Enabled general version, doesn't require running
2770 on ns32k host. Changed to take char* argument, and test for
2771 explicitly specified sizes, instead of using sizeof() on host CPU
2773 (INVALID_FLOAT): Cast first argument.
2774 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2775 list_P032, list_M032): Now const.
2776 (optlist, list_search): Made appropriate arguments now point to
2778 (print_insn_arg): Changed static array of one-character-string
2779 pointers into a static const array of characters; fixed sprintf
2780 statement accordingly.
2782 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2784 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2785 from distribution. A ns32k-dis.c from a previous distribution has
2786 been brought up to date and supports the new interface.
2788 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2790 * configure.in: add bfd_ns32k_arch target support.
2792 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2793 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2795 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2797 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2800 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2802 * h8300-dis.c, mips-dis.c: Don't use true and false.
2804 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2806 * configure.in: Change --with-targets to --enable-targets.
2808 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2810 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2811 opcodes to the first instruction with that opcode, to speed
2812 disassembly of large files. From ralphc@pyramid.com (Ralph
2815 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2817 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2819 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2821 * configure.bat: update to latest makefile.in
2823 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2825 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2826 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2827 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2828 slot insn is in a delay slot.
2829 * z8k-opc.h: (resflg): Fix patterns.
2830 * h8500-opc.h Fix CR insn patterns.
2832 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2834 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2835 "cmpl" before POWER versions, so that gas -many uses them.
2837 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2839 * disassemble.c: New file.
2840 * Makefile.in (OFILES): Add disassemble.o.
2841 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2842 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2843 binutils/configure.in.
2845 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2846 opcode being examined.
2848 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2850 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2851 (insert_ral, insert_ram, insert_ras): New functions.
2852 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2853 RAS for store with update.
2855 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2857 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2858 (edelsohn@npac.syr.edu).
2860 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2862 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2865 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2867 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2869 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2871 * ppc-opc.c (powerpc_operands): The signedp field has been
2872 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2873 instead. Add new operand SISIGNOPT.
2874 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2875 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2876 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2879 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2881 * i386-dis.c (struct private): Renamed to dis_private. `private'
2882 is a reserved word for dynix cc.
2884 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2886 * configure.in: Change error message to refer to bfd/config.bfd
2887 rather than bfd/configure.in.
2889 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2891 * ppc-opc.c: Define POWER2 as short alias flag.
2892 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2895 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2897 * i960-dis.c (print_insn_i960): Don't read a second word for
2898 opcodes 0, 1, 2 and 3.
2900 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2902 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2904 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2906 * m68881-ext.c: Removed; no longer used.
2907 * Makefile.in: Changed accordingly.
2909 * m68k-dis.c (ext_format_68881): Don't declare.
2910 (print_insn_m68k): If an instruction uses place 'i', it uses at
2911 least four fixed bytes.
2912 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2913 extended float, convert to double using floatformat_to_double, not
2914 ieee_extended_to_double, and fetch the data before converting it.
2916 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2918 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2919 davidj@ICSI.Berkeley.EDU (David Johnson).
2921 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2923 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2924 PowerPC uses bdnz[l][a].
2926 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2928 * dis-buf.c, i386-dis.c: Include sysdep.h.
2930 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2932 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2934 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2935 by Motorola PowerPC 601 with PPC_OPCODE_601.
2936 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2937 Disassemble Motorola PowerPC 601 instructions as well as normal
2938 PowerPC instructions.
2940 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2942 * i960-dis.c (reg, mem): Just use a static array instead of
2945 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2947 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2948 condition name index if this is for a negated condition.
2950 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2951 Floating point format for 'H' operand is backwards from normal
2952 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2953 operands (fmpyadd and fmpysub), handle bizarre register
2954 translation correctly for single precision format.
2956 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2957 or 'I' operands if the next format specifier is 'M' (fcmp
2958 condition completer).
2960 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2962 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2963 single number giving a bitmask for the MB and ME fields of an M
2964 form instruction. Change NB to accept 32, and turn it into 0;
2965 also turn 0 into 32 when disassembling. Seperated SH from NB.
2966 (insert_mbe, extract_mbe): New functions.
2967 (insert_nb, extract_nb): New functions.
2968 (SC_MASK): Mask out SA and LK bits.
2969 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2970 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2971 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2972 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2973 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2974 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2975 (powerpc_macros): Define table of macro definitions.
2976 (powerpc_num_macros): Define.
2978 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2979 if PPC_OPERAND_NEXT is set.
2981 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2983 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2984 char. Retrieve contents using bfd_getl32 instead of shifting.
2986 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2988 * ppc-opc.c: New file. Opcode table for PowerPC, including
2989 opcodes for POWER (RS/6000).
2990 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2991 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2992 (CFILES): Add ppc-dis.c.
2993 (ppc-dis.o, ppc-opc.o): New targets.
2994 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2996 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2998 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2999 No space before 'u', 'f', or 'N'.
3001 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3003 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3004 farther than we should.
3006 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3008 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3010 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3012 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3014 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3015 needs it, to prevent reading past the end of a section.
3017 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3019 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3020 Removed t,A case for la; always use t,A(b) case.
3022 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3024 From Ted Lemen <mellon@pepper.ncd.com>
3025 * mips-dis.c (print_insn_arg): Handle 'k'.
3026 * mips-opc.c: Make cache use k, not t.
3028 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3030 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3031 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3032 FLOAT_FORMAT_CODE to put out floating point register names.
3034 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3036 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3038 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3040 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3042 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3044 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3045 larger than 32. Moved dsxx32 variants first for disassembler.
3047 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3049 * z8kgen.c, z8k-opc.h: Add full lda information.
3051 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3053 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3054 movb instructions. Any necessary space will be emitted by
3055 the code to handle nullification completers.
3057 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3059 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3061 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3063 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3064 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3066 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3068 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3070 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3072 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3073 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3075 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3077 * m88k-dis.c (m88kdis): comment change. Remove space after
3079 (printop): handle new arg types DEC and XREG for m88110.
3081 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3083 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3084 type for absolute branch addresses. Delete special
3085 "ble" and "be" code in 'W' operand code.
3087 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3089 * mips-opc.c: Set hazard information correctly for branch
3090 likely instructions.
3092 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3094 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3095 info->fprintf_func for printing and info->print_address_func for
3098 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3100 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3102 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3104 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3105 Corrected second case of "b" for disassembler.
3107 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3109 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3110 to BFD swapping routines to correspond to BFD name changes.
3112 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3114 * mips-opc.c: Change div machine instruction to be z,s,t rather
3115 than s,t. Change div macro to be d,v,t rather than d,s,t.
3116 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3117 rem and remu which generates only the corresponding div
3118 instruction. This is for compatibility with the MIPS assembler,
3119 which only generates the simple machine instruction when an
3120 explicit destination of $0 is used.
3121 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3123 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3125 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3126 WR_31 hazard for bal, bgezal, bltzal.
3128 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3130 * hppa-dis.c (print_insn_hppa): Use print function
3131 from within the disassemble_info, not fprintf_filtered.
3133 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3135 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3136 Law, law@cs.utah.edu.)
3138 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3140 * mips-opc.c ("absu"): Removed.
3143 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3145 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3146 Changed hazard information to distinguish between memory load
3147 delays and coprocessor load delays.
3149 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3151 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3153 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3155 * configure.in: Don't pass cpu to config.bfd.
3157 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3159 * m88k-dis.c (m88kdis): Make class unsigned.
3161 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3163 * alpha-dis.c (print_insn_alpha): One branch format case was
3164 missing the instruction name.
3166 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3168 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3169 Add the arch-specific auxiliary files.
3170 (OFILES): Remove the arch-specific auxiliary files
3171 and use BFD_MACHINES instead of DIS_LIBS.
3172 * configure.in: Set BFD_MACHINES based on --with-targets option.
3174 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3176 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3179 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3181 * sparc-opc.c: Change CONST to const to deal with gcc
3182 -Dconst=__const -traditional.
3184 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3186 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3187 coprocessor instructions out of #if 0, and made them use new
3190 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3192 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3194 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3196 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3197 instruction, for use by the disassembler.
3199 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3200 hand-coded sign extensions that depended on 32-bit host ints.
3201 FIXME, we still depend on big-endian host bitfield ordering.
3202 (sparc_print_insn): Set the insn_info_valid field, and the
3203 other fields that describe the instruction being printed.
3205 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3207 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3208 `jmp' instead of just one of them.
3210 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3212 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3213 (fput_fp_reg_r): Renamed from fput_reg_r.
3214 (fput_fp_reg): New function.
3215 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3217 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3219 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3221 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3223 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3225 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3226 don't output a space.
3228 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3230 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3232 * mips-opc.c: New file, containing opcode table from
3233 ../include/opcode/mips.h.
3234 * Makefile.in: Add it.
3236 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3238 * m88k-dis.c: New file, moved in from gdb and changed to use the
3239 new dis-asm.h disassembler interface.
3240 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3241 (m88k-dis.o): New target.
3243 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3245 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3246 argument string const char * to correspond to opcode/mips.h.
3248 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3250 * mips-dis.c: Updated to account for name changes in new version
3252 * Makefile.in: Added header file dependencies.
3254 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3256 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3258 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3260 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3261 extend, rather than shifts.
3263 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3265 * Makefile.in: Undo 15 June change.
3267 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3269 * m68k-dis.c (print_insn_arg): Change return value to byte count
3271 * m68k-dis.c: Re-write to detect invalid operands before
3272 printing anything, so we can handle this the same way we
3273 handle invalid opcodes.
3275 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3277 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3279 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3281 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3284 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3286 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3288 * configure.in: Do make sysdep.h link.
3289 * Makefile.in: Search ../include. Don't search ../bfd.
3291 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3293 Changes from Jeff Law, law@cs.utah.edu:
3294 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3295 Do not print a space before the completers specified by
3298 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3300 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3301 defined, since gdb has been fixed.
3303 Changes from Jeff Law, law@cs.utah.edu:
3304 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3305 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3306 be a *disassemble_info, not a *FILE.
3307 * hppa-dis.c: Support 'd', '!', and 'a'.
3308 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3309 * hppa-dis.c: Delete cases which are no longer needed.
3311 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3313 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3315 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3317 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3320 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3322 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3323 * configure.in: No longer need to configure to get sysdep.h.
3325 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3327 * Patches from Jeffrey Law <law@cs.utah.edu>.
3328 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3329 templates for 1.1 FP computational instructions.
3331 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3333 * h8500-dis.c (print_insn_h8500): Address argument is type
3335 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3338 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3339 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3341 * sparc-dis.c (compare_opcodes): Move static declaration to
3344 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3346 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3347 instruction, remove unimp hack from 'l' argument.
3349 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3351 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3354 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3356 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3357 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3360 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3362 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3363 arrays of string pointers to 2-d arrays of chars, to save
3366 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3368 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3369 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3371 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3373 * hppa-dis.c: New file from Utah, adapted to new disassembler
3375 * Makefile.in: Include it.
3377 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3379 * sh-dis.c, sh-opc.h: New files.
3381 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3383 * alpha-dis.c, alpha-opc.h: New files.
3385 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3387 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3390 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3392 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3394 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3396 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3399 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3401 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3402 and double percent signs a few places.
3404 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3406 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3407 Use info->print_address_func not print_address.
3409 * dis-buf.c (generic_print_address): New function.
3411 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3413 * Makefile.in: Add sparc-dis.c.
3414 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3416 Add `add' instruction to the set that get checked
3417 for a preceding `sethi' in order to print an absolute address.
3418 * (print_insn): Disassembly prefers real instructions.
3419 (is_delayed_branch): Speed up.
3420 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3421 Still missing some float ops, and needs testing.
3422 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3423 F_ALIAS. Use printf, not fprintf, when not passing a file
3425 (compare_opcodes): Check that identical instructions have
3426 identical opcodes, complain otherwise.
3429 * Include reg_names.
3431 Use dis-asm.h/read_memory_func interface.
3433 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3435 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3436 deliberately return non-zero to setjmp from longjmp. Otherwise
3437 this code fails to compile.
3439 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3441 * m68k-dis.c: Fix prototype for fetch_arg().
3443 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3445 * dis-buf.c: New file, for new read_memory_func interface.
3446 Makefile.in (OFILES): Include it.
3447 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3448 Use new read_memory_func interface.
3450 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3452 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3453 * h8500-opc.h: Fix couple of opcodes.
3455 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3457 * Makefile.in: add dvi & installcheck targets
3459 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3461 * Makefile.in: Update for h8500-dis.c.
3463 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3465 * h8500-dis.c, h8500-opc.h: New files
3467 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3469 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3470 ../include/dis-asm.h.
3471 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3472 and ../gdb/m68k-pinsn.c).
3473 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3474 and ../gdb/i386-pinsn.c).
3475 * m68881-ext.c: New file. Moved definition of
3476 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3477 * Makefile.in: Adjust for new files.
3478 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3479 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3480 can be dis-assembled.
3482 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3484 * mips-dis.c (print_insn_arg): Now returns void.
3486 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3488 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3489 files that use the macros.
3491 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3493 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3494 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3495 (CFILES): Added mips-dis.c.
3497 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3499 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3500 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3502 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3504 * Makefile.in: Improve *clean rules.
3505 * configure.in: Allow a default host.
3507 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3509 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3510 files include other sysdep files
3512 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3514 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3516 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3518 * configure.in: For host support, use ../bfd/configure.host
3519 so it stays in sync with the ../bfd/hosts database.
3521 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3523 * configure.in: use cpu-vendor-os triple instead of nested cases
3525 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3527 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3528 *always* the wrong one.
3530 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3532 * z8kgen.c: added copyright info
3534 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3536 * z8k-dis.c (unparse_instr): prettier tabs
3537 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3539 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3541 * configure.in: Add ncr* configuration.
3542 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3543 picayune ANSI compilers happy.
3545 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3547 * configure.in (i386): Make i386 and i486 synonymous for now.
3548 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3550 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3552 * Makefile.in (install): Fix typo.
3554 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3556 * Makefile.in (make): Remove obsolete crud.
3557 (sparc-opc.o): Avoid Sun Make VPATH bug.
3559 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3561 * Makefile.in: since there are no SUBDIRS, remove rule and
3562 references of subdir_do.
3564 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3566 * Makefile.in (install): Get the library name right here too.
3567 Don't install bfd.h, since it's unrelated to this library. No
3568 subdirs to recurse into, either.
3569 (CFILES): The source file has a .c suffix, not .o.
3571 * sparc-opc.c: New file, moved from BFD.
3572 * Makefile.in (OFILES): Build it.
3574 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3576 * z8k-dis.c: fixed forward refferences of some declarations.
3578 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3580 * Makefile.in: get the name of the library right
3582 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3584 * z8k-dis.c: knows how to disassemble z8k stuff
3585 * z8k-opc.h: new file full of z8000 opcodes
3589 version-control: never
projects / deliverable / binutils-gdb.git / blob