opcodes/ChangeLog-9297

   1 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * mips-opc.c: Add FP_D to s.d instruction flags.
   4
   5 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
   6
   7         * m68k-opc.c (halt, pulse): Enable them on the 68060.
   8
   9 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
  10
  11         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
  12         PC relative offset forms before the 15 bit forms.  An assembler command
  13         line option now chooses the default.
  14
  15 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
  16
  17         * d30v-opc.c (d30v_opcode_table): Set new flags bits
  18         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
  19
  20 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
  21
  22         * configure: Only build libopcodes shared if --enable-shared's value
  23         was `yes', or was set to `*opcodes*'.
  24         * aclocal.m4: Likewise.
  25         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
  26         original source of this bit of code.  It's not clear what the best fix
  27         would be, though.
  28
  29 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
  30
  31         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
  32         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
  33         offset forms before the 15 bit forms, to default to the long forms.
  34
  35 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
  36
  37         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
  38
  39 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
  40
  41         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
  42         symbol if none is present.
  43         (print_insn_big_arm):  Prevent examination of stored symbol if
  44         none is present.
  45
  46 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
  47
  48         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
  49
  50 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
  51
  52         * disassemble.c: Remove disasm_symaddr() function.
  53
  54         * arm-dis.c: Use info->symbol instead of info->flags to determine
  55         if disassmbly should be in Thumb or Arm mode.
  56
  57 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
  58
  59         * arm-dis.c: Add support for disassembling Thumb opcodes.
  60         (print_insn_thumb): New function.
  61
  62         * disassemble.c (disasm_symaddr): New function.
  63
  64         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
  65         (thumb_opcodes): Table of Thumb opcodes.
  66
  67 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
  68
  69         * m68k-opc.c (btst): Change Dd@s to Dd;b.
  70
  71         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
  72         and 'v' as operand types.
  73
  74 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
  75
  76         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
  77         <olivier.carmona@di.epfl.ch>.
  78         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
  79         which has a two word opcode with a one word argument.
  80
  81 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
  82
  83         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
  84         unsigned, not signed.
  85         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
  86
  87 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
  88
  89         * d10v-dis.c (print_operand):
  90         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
  91
  92 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
  93
  94         * d10v-opc.c (OPERAND_FLAG): Split into:
  95         (OPERAND_FFLAG, OPERAND_CFLAG) .
  96         (FSRC): Split into:
  97         (FFSRC, CFSRC).
  98
  99 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
 100
 101         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
 102         field for all INSN_MACRO's.
 103         * mips16-opc.c: same
 104
 105 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
 106
 107         * mips-opc.c (sync,cache): These are 3900 insns.
 108
 109 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 110
 111         sh-opc.h (sh_table): Remove ftst/nan.
 112
 113 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
 114
 115         * mips-opc.c (ffc, ffs): Fix mask.
 116
 117 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
 118
 119         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
 120         control registers.
 121
 122 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 123
 124         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 125         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 126
 127 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 128
 129         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 130         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 131
 132 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
 133
 134         * v850-dis.c (disassemble): Replace // with /* ... */
 135
 136 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
 137
 138         * sparc-opc.c: Add wr & rd for v9a asr's.
 139         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
 140         (v9a_asr_reg_names): New variable.
 141         Patch from David Miller <davem@vger.rutgers.edu>.
 142
 143 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
 144
 145         * sparc-opc.c (v9notv9a): New insn type.
 146         (IMPDEP): Move to the end to not conflict with edge8 et al.
 147         Patch from David Miller <davem@vger.rutgers.edu>.
 148
 149 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
 150
 151         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
 152
 153 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
 154
 155         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
 156
 157 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
 158
 159         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
 160         of disassemble_info structure to determine if an overlay address
 161         has a matching symbol in low memory.
 162
 163         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
 164         new symbol_at_address_func field in disassemble_info structure.
 165
 166 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
 167
 168         * v850-opc.c (extract_d22): Use signed arithmatic.
 169
 170 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
 171
 172         * mips-opc.c: Three op mult is not an ISA insn.
 173
 174 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
 175
 176         * mips-opc.c: Fix formatting.
 177
 178 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
 179
 180         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
 181         than assuming that char is signed.  Explicitly sign extend 16 bit
 182         values, rather than assuming that short is 16 bits.
 183         (OP_sI, OP_J, OP_DIR): Likewise.
 184
 185 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
 186
 187         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
 188         system registers.
 189
 190 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
 191
 192         * v850-opc.c: Fix typo in comment.
 193
 194         * v850-dis.c (disassemble): Add test of processor type when
 195         determining opcodes.
 196
 197 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 198
 199         * configure.in: Use a diversion to set enable_shared before the
 200         arguments are parsed.
 201         * configure: Rebuild.
 202
 203 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 204
 205         * m68k-opc.c (TBL1): Use ! rather than `.
 206         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
 207
 208 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
 209
 210         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
 211
 212         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
 213
 214         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
 215         for mcf5200.
 216
 217         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
 218         * aclocal.m4: Rebuild with new libtool.
 219         * configure: Rebuild.
 220
 221 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 222
 223         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
 224
 225 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
 226
 227         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
 228
 229 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
 230
 231         * v850-opc.c (v850_opcodes): Further rearrangements.
 232
 233 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
 234
 235         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
 236
 237 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
 238
 239         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
 240         parser to work.
 241
 242 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
 243
 244         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
 245
 246 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
 247
 248         * v850-opc.c: Initialise processors field of v850_opcode structure.
 249
 250 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
 251
 252         Merge changes from Martin Hunt:
 253
 254         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
 255
 256         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
 257         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
 258         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
 259
 260         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
 261
 262         * d30v-dis.c (print_insn): First operand of d*i (delayed
 263         branch) instructions is relative.
 264
 265         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
 266         (d30v_operand_table): Add IMM6S3 type.
 267         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
 268
 269         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
 270         and cmp instructions.
 271
 272         * d30v-opc.c: Correct entries for repeat*, and sat*.
 273         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
 274         types. Correct several formats.
 275
 276         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
 277
 278         * d30v-opc.c (pre_defined_registers): Change control registers.
 279
 280         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
 281         SHORT_C2.  Manual was incorrect.
 282
 283         * d30v-dis.c (lookup_opcode):  Return value now indicates
 284         if an opcode has a short and a long form.  Used for deciding
 285         to append a ".s" or ".l".
 286         (print_insn): Append a ".s" to an instruction if it is
 287         the short form and ".l" if it is a long form. Do not append
 288         anything if the instruction has only one possible size.
 289
 290         * d30v-opc.c: Change mulx2h to require an even register.
 291         New form: SHORT_A2; a SHORT_A form that needs an even
 292         register as the first operand.
 293
 294         * d30v-dis.c (print_insn_d30v): Fix problem where the last
 295         instruction was not being disassembled if there were an odd
 296         number of instructions.
 297
 298         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
 299
 300 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
 301
 302         * v850-dis.c (disassemble): Improved display of register lists.
 303
 304 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
 305
 306         * sparc-opc.c (sparc_opcodes): Fix assembler args to
 307         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
 308         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
 309         fandnot1s, fandnot2s.
 310
 311 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
 312
 313         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
 314
 315 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
 316
 317         * cgen-asm.c (cgen_parse_address): New argument resultp.
 318         All callers updated.
 319         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
 320
 321 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
 322
 323         * mn10200-dis.c (disassemble): PC relative instructions are
 324         relative to the next instruction, not the current instruction.
 325
 326 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
 327
 328         * v850-dis.c (disassemble): Only signed extend values that are not
 329         returned by extract functions.
 330         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
 331
 332 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
 333
 334         * v850-opc.c: Update comments.  Remove use of
 335         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
 336
 337 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
 338
 339         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
 340
 341 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
 342
 343         * configure: Rebuilt with latest devo autoconf for NT support.
 344
 345 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
 346
 347         * v850-dis.c (disassemble): Use curly brace syntax for register
 348         lists.
 349
 350         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
 351         where r0 is being used as a destination register.
 352
 353 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
 354
 355         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
 356
 357 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
 358
 359         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
 360
 361 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
 362
 363         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
 364         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
 365         opcodes..
 366
 367 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 368
 369         * configure (cgen_files): Add support for v850e target.
 370         * configure.in (cgen_files):  Add support for v850e target.
 371
 372 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 373
 374         * configure (cgen_files): Add support for v850ea target.
 375         * configure.in (cgen_files):  Add support for v850ea target.
 376
 377 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
 378
 379         * configure.in (bfd_arc_arch): Add.
 380         * configure: Rebuild.
 381         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
 382         * Makefile.in: Rebuild.
 383         * arc-dis.c, arc-opc.c: New files.
 384         * disassemble.c (ARCH_all): Define ARCH_arc.
 385         (disassembler): Add ARC support.
 386
 387 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
 388
 389         * v850-dis.c (disassemble): Add support for v850EA instructions.
 390
 391         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
 392         (v850_opcodes): Add v850EA instructions.
 393
 394         * v850-dis.c (disassemble): Add support for v850E instructions.
 395
 396         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
 397         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
 398         insert_spe, extract_spe): New Functions.
 399         (v850_opcodes): Add v850E instructions.
 400
 401         * v850-opc.c: Reorganised and re-layed out to improve readability
 402         and portability.
 403
 404 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
 405
 406         * configure: Rebuild with autoconf 2.12.1.
 407
 408 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 409
 410         * aclocal.m4, configure: Rebuild with new automake patches.
 411
 412 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
 413
 414         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
 415         * acinclude.m4: Just include acinclude.m4 from BFD.
 416         * aclocal.m4, configure: Rebuild.
 417
 418 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
 419
 420         * Makefile.am: New file, based on old Makefile.in.
 421         * acconfig.h: New file.
 422         * acinclude.m4: New file.
 423         * stamp-h.in: New file.
 424         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
 425         Removed shared library handling; now handled by libtool.  Replace
 426         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
 427         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
 428         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
 429         handling in AC_OUTPUT.
 430         * dep-in.sed: Change .o to .lo.
 431         * Makefile.in: Now built with automake.
 432         * aclocal.m4: Now built with aclocal.
 433         * config.in, configure: Rebuild.
 434
 435 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
 436
 437         * mips-opc.c: Fix typo/thinko in "eret" instruction.
 438
 439 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
 440
 441         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
 442         Make array const.
 443         * sparc-dis.c (sorted_opcodes): New static local.
 444         (struct opcode_hash): `opcode' is pointer to const element.
 445         (build_hash): First arg is now table of sorted pointers.
 446         (print_insn_sparc): Sort opcodes by sorting table of pointers.
 447         (compare_opcodes): Update.
 448
 449 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
 450
 451         * cgen-opc.c: #include <ctype.h>.
 452         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
 453         Handle case insensitive hashing.
 454         (hash_keyword_value): Change type of `value' to unsigned int.
 455
 456 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
 457
 458         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
 459         precision FP, mark it as such.  Likewise for double precision
 460         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
 461         possible.
 462
 463 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
 464
 465         * ppc-opc.c (extract_nsi): make unsigned expression signed before
 466         negating it.
 467         (UNUSED): remove one level of parens, so MSVC doesn't choke on
 468         nesting depth when all the macros are expanded.
 469
 470 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
 471
 472         * sparc-opc.c: The fcmp v9a instructions take an integer register
 473         as a destination, not a floating point register.  From Christian
 474         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
 475
 476 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
 477
 478         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
 479         syntax.  From Roman Hodek
 480         <rnhodek@faui22c.informatik.uni-erlangen.de>.
 481
 482         * i386-dis.c (twobyte_has_modrm): Fix pand.
 483
 484 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
 485
 486         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
 487
 488 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
 489
 490         * arm-dis.c: Add prototypes for arm_decode_shift and
 491         print_insn_arm.
 492
 493 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
 494
 495         * mips-opc.c: Add r3900 insns.
 496
 497 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 498
 499         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
 500         print delay slot instructions on the same line.  When using a PC
 501         relative load, add a comment with the value being loaded if it can
 502         be obtained.
 503
 504 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
 505
 506         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
 507         to pushS/popS for segment regs and byte constant so that
 508         pushw/popw printed when in 16 bit data mode.
 509
 510         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
 511         print cbtw, cwtd in 16 bit data mode.
 512         * i386-dis.c (putop): extra case W to support above.
 513
 514         * i386-dis.c (print_insn_x86): print addr32 prefix when given
 515         address size prefix in 16 bit address mode.
 516
 517 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
 518
 519         * sh-dis.c: Reindent.  Rename local variable fprintf to
 520         fprintf_fn.
 521
 522 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
 523
 524         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
 525
 526 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
 527
 528         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
 529           field membership.
 530         * mips16-opc.c (mip16_opcodes): same.
 531
 532 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
 533
 534         * m68k-opc.c (moveb): Change $d to %d.
 535
 536 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
 537
 538         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
 539         (twobyte_has_modrm): Likewise.
 540         (grps): Likewise.
 541         (OP_MMX, OP_EM, OP_MS): New static functions.
 542
 543         * i386-dis.c: Revert patch of April 4.  The output now matches
 544         what gcc generates.
 545
 546 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
 547
 548         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
 549         of $simm16.
 550
 551 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
 552
 553         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
 554
 555 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
 556
 557         * Makefile.in (install): Depend upon installdirs.
 558         (installdirs): New target.
 559
 560 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
 561
 562         From Thomas Graichen <graichen@rzpd.de>:
 563         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
 564         * configure: Rebuild.
 565
 566 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
 567
 568         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
 569         Delete string{,s}.h support.
 570
 571 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
 572
 573         * cgen-asm.c (cgen_parse_operand_fn): New global.
 574         (cgen_parse_{{,un}signed_integer,address}): Update call to
 575         cgen_parse_operand_fn.
 576         (cgen_init_parse_operand): New function.
 577         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
 578         from cgen_asm_init_parse.
 579         (m32r_cgen_assemble_insn): New operand `errmsg'.
 580         Delete call to as_bad, return error message to caller.
 581         (m32r_cgen_asm_hash_keywords): #if 0 out.
 582
 583 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 584
 585         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
 586         not data register.
 587         [case 'J']: Fix typo in register name.
 588
 589 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
 590
 591         * configure.in: Substitute SHLIB_LIBS.
 592         * configure: Rebuild.
 593         * Makefile.in (SHLIB_LIBS): New variable.
 594         ($(SHLIB)): Use $(SHLIB_LIBS).
 595
 596 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
 597
 598         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
 599
 600         * cgen-opc.c (hash_keyword_name): Improve algorithm.
 601
 602         * disassemble.c (disassembler): Handle m32r.
 603
 604 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
 605
 606         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
 607         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
 608         * Makefile.in (CFILES): Add them.
 609         (ALL_MACHINES): Add them.
 610         (dependencies): Regenerate.
 611         * configure.in (cgen_files): New variable.
 612         (bfd_m32r_arch): Add entry.
 613         * configure: Regenerate.
 614
 615 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 616
 617         * configure.in: Correct file names for bfd_mn10[23]00_arch.
 618         * configure: Rebuild.
 619
 620         * Makefile.in: Rebuild dependencies.
 621
 622         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
 623
 624         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
 625         fdivp.
 626
 627 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
 628
 629         * Branched binutils 2.8.
 630
 631 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
 632
 633         * m10200-dis.c: Rename from mn10200-dis.c.
 634         * m10200-opc.c: Rename from mn10200-opc.c.
 635         * m10300-dis.c: Rename from mn10300-dis.c
 636         * m10300-opc.c: Rename from mn10300-opc.c.
 637         * Makefile.in: Update accordingly.
 638
 639         * mips16-opc.c: Add mul and dmul macros.
 640
 641 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
 642
 643         * makefile.vms: Update CFLAGS, add clean target.
 644
 645 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
 646
 647         * mips-opc.c: Add "wait".  From Ralf Baechle
 648         <ralf@gnu.ai.mit.edu>.
 649
 650         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
 651         * configure, config.in: Rebuild.
 652         * sysdep.h: Include <stdlib.h> if it exists.
 653         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
 654         <string.h>.
 655         * Makefile.in: Rebuild dependencies.
 656
 657 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 658
 659         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
 660         Andrew Bray <andy@madhouse.demon.co.uk>.
 661
 662         * mips-opc.c: Add cast when setting mips_opcodes.
 663
 664 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
 665
 666         * v850-dis.c (disassemble):  Fix sign extension problem.
 667         * v850-opc.c (extract_d*):  Fix sign extension problems to make
 668         disassembly calculate branch offsets correctly.
 669
 670 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
 671
 672         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
 673
 674         * mips-opc.c: Add dctr and dctw.
 675
 676 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 677
 678         * d30v-dis.c (print_insn): Change the way signed constants
 679         are displayed.
 680
 681 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
 682
 683         * Makefile.in (BFD_H): New variable.
 684         (HFILES): New variable.
 685         (CFILES): Add all C files.
 686         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
 687         Delete old dependencies, and build new ones.
 688         * dep-in.sed: New file.
 689
 690 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 691
 692         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
 693
 694 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
 695
 696         * mn10200-opc.c: Change "trap" to "syscall".
 697         * mn10300-opc.c: Add new "syscall" instruction.
 698
 699 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 700
 701         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
 702         mulul insns on the coldfire.
 703
 704 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
 705
 706         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
 707         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
 708         (print_insn_little_arm): Likewise.
 709
 710 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 711
 712         Based on patches from H.J. Lu <hjl@lucon.org>:
 713         * i386-dis.c (fetch_data): Add prototype.
 714         * m68k-dis.c (fetch_data): Add prototype.
 715         (dummy_print_address): Add prototype.  Make static.
 716         * ppc-opc.c (valid_bo): Add prototype.
 717         * sparc-dis.c (build_hash_table): Add prototype.
 718         (is_delayed_branch, compute_arch_mask): Add prototypes.
 719         (print_insn_sparc): Make several local variables const.
 720         (compare_opcodes): Change arguments to const PTR.  Add prototype.
 721         * sparc-opc.c (arg): Change name field to be const.
 722         (lookup_name, lookup_value): Add prototypes.  Change table and
 723         name parameters to be const.
 724         (sparc_encode_asi): Change name parameter to be const.
 725         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
 726         (sparc_encode_sparclet_cpreg): Likewise.
 727         (sparc_decode_asi): Change return type to be const.
 728         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
 729         (sparc_decode_sparclet_cpreg): Likewise.
 730
 731 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
 732
 733         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
 734         Solaris doesn't like the combined options, and the -f is
 735         unnecessary.
 736         (stamp-tshlink, install): Likewise.
 737
 738 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
 739
 740         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
 741         as relaxable.
 742
 743 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
 744
 745         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
 746
 747 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
 748
 749         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
 750         the mc68000.
 751
 752 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 753
 754         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
 755
 756 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
 757
 758         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
 759
 760 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
 761
 762         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
 763
 764 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 765
 766         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
 767         floatformat_to_double to make portable.
 768         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
 769         precision float.
 770
 771 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
 772
 773         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
 774         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
 775
 776 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 777
 778         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
 779         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
 780
 781 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
 782
 783         * tic80-opc.c (LSI_SCALED): Renamed from this ...
 784         (OFF_SL_BR_SCALED): ... to this, and added the flag
 785         TIC80_OPERAND_BASEREL to the flags word.
 786         (tic80_opcodes): Replace all occurances of LSI_SCALED with
 787         OFF_SL_BR_SCALED.
 788
 789 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
 790
 791         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
 792         Change mips_opcodes from const array to a pointer,
 793         and change bfd_mips_num_opcodes from const int to int,
 794         so that we can increase the size of the mips opcodes table
 795         dynamically.
 796
 797 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
 798
 799         * tic80-opc.c (tic80_predefined_symbols): Revert change to
 800         store BITNUM values in the table in one's complement form
 801         to match behavior when assembler is given a raw numeric
 802         value for a BITNUM operand.
 803         * tic80-dis.c (print_operand_bitnum): Ditto.
 804
 805 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 806
 807         * d30v-opc.c: Removed references to FLAG_X.
 808
 809 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 810
 811         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
 812
 813 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 814
 815         * Makefile.in: Added d30v object files.
 816         * configure: (bfd_d30v_arch) Rebuilt.
 817         * configure.in: (bfd_d30v_arch) Added new case.
 818         * d30v-dis.c: New file.
 819         * d30v-opc.c: New file.
 820         * disassemble.c (disassembler) Add entry for d30v.
 821
 822 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
 823
 824         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
 825         representations for the floating point BITNUM values.
 826
 827 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
 828
 829         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
 830         in the table in one's complement form, as they appear in the
 831         actual instruction.
 832         (tic80_symbol_to_value): Use macros to access predefined
 833         symbol fields.
 834         (tic80_value_to_symbol): Ditto.
 835         (tic80_next_predefined_symbol): New function.
 836         * tic80-dis.c (print_operand_bitnum): Remove code that did
 837         one's complement for BITNUM values.
 838
 839 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
 840
 841         * makefile.vms: Remove 8 bit characters.  Update to latest
 842         gcc release.
 843
 844 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 845
 846         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
 847
 848 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
 849
 850         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
 851         (IMM24_PCREL): Likewise.
 852
 853 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 854
 855         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
 856         address for an extended PC relative instruction that is not a
 857         branch.
 858
 859 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 860
 861         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
 862         bytes_per_line.
 863
 864 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
 865
 866         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
 867         (tic80_opcodes): Sort entries so that long immediate forms
 868         come after short immediate forms, making it easier for
 869         assembler to select the right one for a given operand.
 870
 871 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
 872
 873         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
 874         display_endian.
 875         (print_insn_mips16): Likewise.
 876
 877 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
 878
 879         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
 880         a symbol class that restricts translation to just that
 881         class (general register, condition code, etc).
 882
 883 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
 884
 885         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
 886         and REG_DEST_E for register operands that have to be
 887         an even numbered register.  Add REG_FPA for operands that
 888         are one of the floating point accumulator registers.
 889         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
 890         (tic80_opcodes): Change entries that need even numbered
 891         register operands to use the new operand table entries.
 892         Add "or" entries that are identical to "or.tt" entries.
 893
 894 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 895
 896         * mips16-opc.c: Add new cases of exit instruction for
 897         disassembler.
 898         * mips-dis.c (print_mips16_insn_arg): Display floating point
 899         registers in operands of exit instruction.  Print `$' before
 900         register names in operands of entry and exit instructions.
 901
 902 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
 903
 904         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
 905         pairs for all predefined symbols recognized by the assembler.
 906         Also used by the disassembling routines.
 907         (tic80_symbol_to_value): New function.
 908         (tic80_value_to_symbol): New function.
 909         * tic80-dis.c (print_operand_control_register,
 910         print_operand_condition_code, print_operand_bitnum):
 911         Remove private tables and use tic80_value_to_symbol function.
 912
 913 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 914
 915         * d10v-dis.c (print_operand): Change address printing
 916         to correctly handle PC wrapping.  Fixes PR11490.
 917
 918 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
 919
 920         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
 921         branches relaxable.
 922
 923 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
 924
 925         * mips-dis.c (print_insn_mips16): Set insn_info information.
 926         (print_mips16_insn_arg): Likewise.
 927
 928         * mips-dis.c (print_insn_mips16): Better handling of an extend
 929         opcode followed by an instruction which can not be extended.
 930
 931 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
 932
 933         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
 934         coldfire moveb instruction to not allow an address register as
 935         destination.  Although the documentation does not indicate that
 936         this is invalid, experiments uncovered unexpected behavior.
 937         Added a comment explaining the situation.  Thanks to Andreas
 938         Schwab for pointing this out to me.
 939
 940 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
 941
 942         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
 943         entries are presorted so that entries with the same mnemonic are
 944         adjacent to each other in the table.  Sort the entries for each
 945         instruction so that this is true.
 946
 947 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 948
 949         * m68k-dis.c: Include <libiberty.h>.
 950         (print_insn_m68k): Sort the opcode table on the most significant
 951         nibble of the opcode.
 952
 953 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
 954
 955         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
 956         "vsub", "vst", "xnor", and "xor" instructions.
 957         (V_a1): Renamed from V_a, msb of accumulator reg number.
 958         (V_a0): Add macro, lsb of accumulator reg number.
 959
 960 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
 961
 962         * tic80-dis.c (print_insn_tic80): Broke excessively long
 963         function up into several smaller ones and arranged for
 964         the instruction printing function to be callable recursively
 965         to print vector instructions that have both a load and a
 966         math instruction packed into a single opcode.
 967         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
 968         to explain why it comes after the other vector opcodes.
 969
 970 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 971
 972         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
 973         move insns to handle immediate operands.
 974
 975 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 976
 977         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
 978         fix operand mask in the "moveml" entries for the coldfire.
 979
 980 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
 981
 982         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
 983         New macros for building vector instruction opcodes.
 984         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
 985         FMT_LI, which were unused.  The field is now a flags field.
 986         Remove some opcodes that are possible, but illegal, such
 987         as long immediate instructions with doubles for immediate
 988         values.  Add "vadd" and "vld" instructions.
 989
 990 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
 991
 992         * tic80-opc.c (tic80_operands): Reorder some table entries to make
 993         the order more logical.  Move the shift alias instructions ("rotl",
 994         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
 995         interspersed with the regular sr.x and sl.x instructions.  Add
 996         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
 997         "sub", "subu", "swcr", and "trap".
 998
 999 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
1000
1001         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1002         (OFF_SL_PC): Renamed from OFF_SL.
1003         (OFF_SS_BR): New operand type for base relative operand.
1004         (OFF_SL_BR): New operand type for base relative operand.
1005         (REG_BASE): New operand type for base register operand.
1006         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1007         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1008         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1009         instructions.
1010         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1011         10 char field, padded with spaces on rhs, rather than a string
1012         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
1013         than old TIC80_OPERAND_RELATIVE.  Add support for new
1014         TIC80_OPERAND_BASEREL flag bit.
1015
1016 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
1017
1018         * tic80-dis.c (print_insn_tic80): Print floating point operands
1019         as floats.
1020         * tic80-opc.c (SPFI): Add single precision floating point
1021         immediate operand type.
1022         (ROTATE): Add rotate operand type for shifts.
1023         (ENDMASK): Add for shifts.
1024         (n): Macro for the 'n' bit.
1025         (i): Macro for the 'i' bit.
1026         (PD): Macro for the 'PD' field.
1027         (P2): Macro for the 'P2' field.
1028         (P1): Macro for the 'P1' field.
1029         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1030         "fcmp", and "fdiv".
1031
1032 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
1033
1034         * mn10200-dis.c (disassemble): Mask off unwanted bits after
1035         adding in current address for pc-relative operands.
1036
1037 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
1038
1039         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1040         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1041         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1042         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1043         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1044         REG_BASE_M_SI, REG_BASE_M_LI respectively.
1045         (REG_SCALED, LSI_SCALED): New operand types.
1046         (E): New macro for 'E' bit at bit 27.
1047         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1048         opcodes, including the various size flavors (b,h,w,d) for
1049         the direct load and store instructions.
1050
1051 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
1052
1053         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1054         in an instruction.
1055         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1056         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1057         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1058         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1059         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1060         masks with "MASK_* & ~M_*" to get the M bit reset.
1061         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1062
1063 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
1064
1065         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1066         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
1067         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1068         form.
1069         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1070         CC, SICR, and LICR table entries.
1071         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1072         "bcnd", and "brcr" opcodes.
1073
1074 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
1075
1076         * ppc-opc.c (powerpc_operands): Make comment match the
1077         actual fields (no shift field).
1078         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1079         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1080         partial implementation, work in progress.
1081         * tic80-opc.c (tic80_operands): Begin construction operands table.
1082         (tic80_opcodes): Continue populating opcodes table and start
1083         filling in the operand indices.
1084         (tic80_num_opcodes): Add this.
1085
1086 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1087
1088         * m68k-opc.c: Add #B case for moveq.
1089
1090 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
1091
1092         * mn10300-dis.c (disassemble): Make sure all variables are initialized
1093         before they are used.
1094
1095 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
1096
1097         * v850-opc.c (v850_opcodes): Put curly-braces around operands
1098         for "breakpoint" instruction.
1099
1100 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
1101
1102         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1103         (dep): Use ALL_CFLAGS rather than CFLAGS.
1104
1105 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1106
1107         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1108         flag.
1109
1110 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
1111
1112         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1113         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1114
1115 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1116
1117         * mips16-opc.c: Add "abs".
1118
1119 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
1120
1121         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1122         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1123         (disassembler): Add bfd_arch_tic80 support to set disassemble
1124         to print_insn_tic80.
1125         * tic80-dis.c (print_insn_tic80): Add stub.
1126
1127 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
1128
1129         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1130         * configure: Regenerate with autoconf.
1131         * tic80-dis.c: Add file.
1132         * tic80-opc.c: Add file.
1133
1134 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1135
1136         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
1137
1138 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
1139
1140         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1141         (mn10200_opcodes): Use it for some logicals and btst insns.
1142         Add "break" and "trap" instructions.
1143
1144         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1145
1146         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1147
1148 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1149
1150         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1151         relative load or add now depends upon whether the instruction is
1152         in a delay slot.
1153
1154 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
1155
1156         * mn10200-dis.c: Finish writing disassembler.
1157         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1158         Fix mask for "jmp (an)".
1159
1160         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1161         handle endianness issues for mn10300.
1162
1163         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1164
1165 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
1166
1167         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1168         instruction.  Fix opcode field for "movb (imm24),dn".
1169
1170         * mn10200-opc.c (mn10200_operands): Fix insertion position
1171         for DI operand.
1172
1173 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
1174
1175         * mn10200-opc.c: Create mn10200 opcode table.
1176         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
1177         but moving along nicely.
1178
1179 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1180
1181         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
1182
1183 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
1184
1185         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1186         specifiers for fmovem* instructions.
1187
1188 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1189
1190         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1191
1192 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
1193
1194         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1195         with dsrl.
1196
1197 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1198
1199         * mn10300-opc.c: Add some comments explaining the various
1200         operands and such.
1201
1202         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1203
1204 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1205
1206         * m68k-dis.c (print_insn_arg): Handle new < and > operand
1207         specifiers.
1208
1209         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1210         operand specifiers in fmovm* instructions.
1211
1212 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
1213
1214         * ppc-opc.c (insert_li): Give an error if the offset has the two
1215         least significant bits set.
1216
1217 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1218
1219         * mips-dis.c (print_insn_mips16): Separate the instruction from
1220         the arguments with a tab, not a space.
1221
1222 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
1223
1224         * mn10300-dis.c (disasemble): Finish conversion to '$' as
1225         register prefix.
1226
1227         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1228         mov am,(imm32,sp).
1229
1230 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
1231
1232         * configure: Rebuild with autoconf 2.12.
1233
1234         Add support for mips16 (16 bit MIPS implementation):
1235         * mips16-opc.c: New file.
1236         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1237         (mips16_reg_names): New static array.
1238         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1239         after seeing a 16 bit symbol.
1240         (print_insn_little_mips): Likewise.
1241         (print_insn_mips16): New static function.
1242         (print_mips16_insn_arg): New static function.
1243         * mips-opc.c: Add jalx instruction.
1244         * Makefile.in (mips16-opc.o): New target.
1245         * configure.in: Use mips16-opc.o for bfd_mips_arch.
1246         * configure: Rebuild.
1247
1248 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
1249
1250         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1251         operand specifiers in *save, *restore and movem* instructions.
1252
1253         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1254         the coldfire.
1255
1256         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1257         register operands for immediate arithmetic, not, neg, negx, and
1258         set according to condition instructions.
1259
1260         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1261         specifier of the effective-address operand in immediate forms of
1262         arithmetic instructions.  The specifier for the immediate operand
1263         notes how and where the constant will be stored.
1264
1265 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
1266
1267         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1268         opcode.
1269
1270         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1271         register prefix.
1272
1273         * mn10300-dis.c (disassemble): Prefix registers with '%'.
1274
1275 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
1276
1277         * mn10300-dis.c (disassemble): Handle register lists.
1278
1279         * mn10300-opc.c: Fix handling of register list operand for
1280         "call", "ret", and "rets" instructions.
1281
1282         * mn10300-dis.c (disassemble): Print PC-relative and memory
1283         addresses symbolically if possible.
1284         * mn10300-opc.c: Distinguish between absolute memory addresses,
1285         pc-relative offsets & random immediates.
1286
1287         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1288         in 7 byte insns.
1289         (disassemble): Handle SPLIT and EXTENDED operands.
1290
1291 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
1292
1293         * mn10300-dis.c: Rough cut at printing some operands.
1294
1295         * mn10300-dis.c: Start working on disassembler support.
1296         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1297
1298         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1299         list.
1300         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1301
1302 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1303
1304         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1305
1306 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
1307
1308         * mn10300-opc.c (mn10300_opcodes): Demand parens around
1309         register argument is calls and jmp instructions.
1310
1311 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
1312
1313         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1314         getx operand.  Fix opcode for mulqu imm,dn.
1315
1316 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
1317
1318         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1319         in MN10300_OPERAND_SPLIT operands for how many bits
1320         appear in the basic insn word.  Add IMM32_HIGH24,
1321         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1322         (mn10300_opcodes): Use new operands as needed.
1323
1324         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1325         for bset, bclr, btst instructions.
1326         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1327
1328         * mn10300-opc.c (mn10300_operands): Remove many redundant
1329         operands.  Update opcode table as appropriate.
1330         (IMM32): Add MN10300_OPERAND_SPLIT flag.
1331         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1332
1333 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
1334
1335         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1336         operands (for indexed load/stores).  Fix bitpos for DI
1337         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1338         few instructions that insert immediates/displacements in the
1339         middle of the instruction.  Add IMM8E for 8 bit immediate in
1340         the extended part of an instruction.
1341         (mn10300_operands): Use new opcodes as appropriate.
1342
1343 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1344
1345         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1346         sequential so the assembler never parallelizes it with
1347         other instructions.
1348
1349 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
1350
1351         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1352         a data/address register that appears in register field 0
1353         and register field 1.
1354         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1355
1356 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
1357
1358         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1359         standard disassembly.
1360
1361         * alpha-opc.c (alpha_operands): Rearrange flags slot.
1362         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1363         Recategorize PALcode instructions.
1364
1365 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
1366
1367         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1368
1369 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
1370
1371         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1372         there are no operand types.
1373
1374 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
1375
1376         * v850-opc.c (D9_RELAX): Renamed from D9, all references
1377         changed.
1378         (v850_operands): Make sure D22 immediately follows D9_RELAX.
1379
1380 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
1381
1382         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1383
1384 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
1385
1386         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1387         and sst.w instructions.
1388
1389         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1390         "bCC"instructions).
1391
1392 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1393
1394         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1395         and the arguments.
1396
1397 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
1398
1399         * ppc-opc.c (PPCPWR2): Define.
1400         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1401         it.
1402
1403 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
1404
1405         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1406         field for movhu instruction.
1407
1408         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1409         cast value to "long" not "signed long" to keep hpux10
1410         compiler quiet.
1411
1412 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
1413
1414         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1415         for mov (abs16),DN.
1416
1417         * mn10300-opc.c (FMT*): Remove definitions.
1418
1419         * mn10300-opc.c (mn10300_opcodes): Fix destination register
1420         for shift-by-register opcodes.
1421
1422         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1423         into [AD][MN][01] for encoding the position of the register
1424         in the opcode.
1425
1426 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
1427
1428         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1429         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1430
1431 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
1432
1433         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1434         Fix various typos.  Add "PAREN" operand.
1435         (MEM, MEM2): Define.
1436         (mn10300_opcodes): Surround all memory addresses with "PAREN"
1437         operands.  Fix several typos.
1438
1439         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1440         changes.
1441
1442 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
1443
1444         * mn10300-opc.c (FMT_XX): Renumber starting at one.
1445         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
1446         at this time.
1447         (mn10300_opcodes): Break opcode format out into its own field.
1448         Update many operand fields to deal with signed vs unsigned
1449         issues.  Fix one or two typos in the "mov" instruction
1450         opcode, mask and/or operand fields.
1451
1452 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1453
1454         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1455         m68851 wasn't reset.
1456
1457 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1458
1459         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1460         all opcodes.  Very rough cut at operands for all opcodes.
1461
1462         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1463         opcode table.
1464
1465 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
1466
1467         * mn10200-opc.c, mn10300-opc.c: New files.
1468         * mn10200-dis.c, mn10300-dis.c: New files.
1469         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1470         * disassemble.c: Break mn10x00 support into 10200 and 10300
1471         support.
1472         * configure.in: Likewise.
1473         * configure: Rebuilt.
1474
1475 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1476
1477         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1478
1479 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
1480
1481         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1482         MN10x00 processors.
1483         * disassemble.c (ARCH_mn10x00): Define.
1484         (disassembler): Handle bfd_arch_mn10x00.
1485         * configure.in: Recognize bfd_mn10x00_arch.
1486         * configure: Rebuilt.
1487
1488 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
1489
1490         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
1491         accordingly.  Don't declare functions using op_rtn.
1492
1493 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
1494
1495         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
1496         params to be more standard.
1497         * (disassemble):  Print absolute addresses and symbolic names for
1498         branch and jump targets.
1499         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
1500         bit operands.
1501         * (v850_opcodes):  Add breakpoint insn.
1502
1503 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1504
1505         * m68k-opc.c: Move the fmovemx data register cases before the
1506         other cases, so that they get recognized before the data register
1507         does gets treated as a degenerate register list.
1508
1509 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1510
1511         * mips-opc.c: Add a case for "div" and "divu" with two registers
1512         and a destination of $0.
1513
1514 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
1515
1516         * mips-dis.c (print_insn_arg): Add prototype.
1517         (_print_insn_mips): Ditto.
1518
1519 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1520
1521         * mips-dis.c (print_insn_arg): Print condition code registers as
1522         $fccN.
1523
1524 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
1525
1526         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1527
1528 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
1529
1530         * v850-dis.c (disassemble): Make static.  Provide prototype.
1531
1532 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
1533
1534         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1535         in range checks.
1536
1537 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
1538
1539         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1540         ']' characters into the output stream.
1541         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1542         Add "memop" field to all opcodes (for the disassembler).
1543         Reorder opcodes so that "nop" comes before "mov" and "jr"
1544         comes before "jarl".
1545
1546         * v850-dis.c (print_insn_v850): Fix typo in last change.
1547
1548         * v850-dis.c (print_insn_v850): Properly handle disassembling
1549         a two byte insn at the end of a memory region when the memory
1550         region's size is only two byte aligned.
1551
1552         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1553
1554         * v850-dis.c (v850_reg_names): Define.
1555         (v850_sreg_names, v850_cc_names): Likewise.
1556         (disassemble): Very rough cut at printing operands (unformatted).
1557
1558         * v850-opc.c (BOP_MASK): Fix.
1559         (v850_opcodes): Fix mask for jarl and jr.
1560
1561         * v850-dis.c: New file.  Skeleton for disassembler support.
1562         * Makefile.in Remove v850 references, they're not needed here.
1563         * configure.in: Add v850-dis.o when building v850 toolchains.
1564         * configure: Rebuilt.
1565         * disassemble.c (disassembler): Call v850 disassembler.
1566
1567         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1568         (insert_d8_6, extract_d8_6): New functions.
1569         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1570         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1571         Add D8_6.
1572         (IF4A, IF4B): Use "D7" instead of "D7S".
1573         (IF4C, IF4D): Use "D8_7" instead of "D8".
1574         (IF4E, IF4F): New.  Use "D8_6".
1575         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
1576         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
1577
1578         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1579         (v850_operands): Change D16 to D16_15, use special insert/extract
1580         routines.  New new D16 that uses the generic insert/extract code.
1581         (IF7A, IF7B): Use D16_15.
1582         (IF7C, IF7D): New.  Use D16.
1583         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1584
1585         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1586         message.  Issue an error if the branch offset is odd.
1587
1588         * v850-opc.c: Add notes about needing special insert/extract
1589         for all the load/store insns, except "ld.b" and "st.b".
1590
1591         * v850-opc.c (insert_d22, extract_d22): New functions.
1592         (v850_operands): Use insert_d22 and extract_d22 for
1593         D22 operands.
1594         (insert_d9): Fix range check.
1595
1596 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1597
1598         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1599         and set bits field to D9 and D22 operands.
1600
1601 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
1602
1603         * v850-opc.c (v850_operands): Define SR2 operand.
1604         (v850_opcodes): "ldsr" uses R1,SR2.
1605
1606         * v850-opc.c (v850_opcodes): Fix opcode specs for
1607         sld.w, sst.b, sst.h, sst.w, and nop.
1608
1609 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
1610
1611         * v850-opc.c (v850_opcodes): Add null opcode to mark the
1612         end of the opcode table.
1613
1614 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1615
1616         * d10v-opc.c (pre_defined_registers): Added register pairs,
1617         "r0-r1", "r2-r3", etc.
1618
1619 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
1620
1621         * v850-opc.c (v850_operands): Make I16 be a signed operand.
1622         Create I16U for an unsigned 16bit mmediate operand.
1623         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1624
1625         * v850-opc.c (v850_operands): Define EP operand.
1626         (IF4A, IF4B, IF4C, IF4D): Use EP.
1627
1628         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1629         with immediate operand, "movhi".  Tweak "ldsr".
1630
1631         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1632         correct.  Get sld.[bhw] and sst.[bhw] closer.
1633
1634         * v850-opc.c (v850_operands): "not" is a two byte insn
1635
1636         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1637
1638         * v850-opc.c (v850_operands): D16 inserts at offset 16!
1639
1640         * v850-opc.c (two): Get order of words correct.
1641
1642         * v850-opc.c (v850_operands): I16 inserts at offset 16!
1643
1644         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1645         register source and destination operands.
1646         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1647
1648         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
1649         same thinko in "trap" opcode.
1650
1651         * v850-opc.c (v850_opcodes): Add initializer for size field
1652         on all opcodes.
1653
1654         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
1655         Add D8 for 8-bit unsigned field in short load/store insns.
1656         (IF4A, IF4D): These both need two registers.
1657         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
1658         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1659         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
1660         for "ldsr" and "stsr".
1661         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1662         is unsigned.
1663
1664         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1665         short store word (sst.w).
1666
1667 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1668
1669         * v850-opc.c (v850_operands): Added insert and extract fields,
1670         pointers to functions that handle unusual operand encodings.
1671
1672 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
1673
1674         * v850-opc.c (v850_opcodes): Enable "trap".
1675
1676         * v850-opc.c (v850_opcodes): Fix order of displacement
1677         and register for "set1", "clr1", "not1", and "tst1".
1678
1679 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
1680
1681         * v850-opc.c (v850_operands): Add "B3" support.
1682         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1683         and "tst1".
1684
1685         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1686
1687         * v850-opc.c: Close unterminated comment.
1688
1689 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1690
1691         * v850-opc.c (v850_operands): Add flags field.
1692         (v850_opcodes): add move opcodes.
1693
1694 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1695
1696         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1697         * configure: (bfd_v850v_arch) Add new case.
1698         * configure.in: (bfd_v850_arch) Add new case.
1699         * v850-opc.c: New file.
1700
1701 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
1702
1703         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1704
1705 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1706
1707         * d10v-opc.c: Add additional information to the opcode
1708         table to help determinine which instructions can be done
1709         in parallel.
1710
1711 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
1712
1713         * mpw-make.sed: Update editing of include pathnames to be
1714         more general.
1715
1716 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
1717
1718         * arm-opc.h: Added "bx" instruction definition.
1719
1720 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
1721
1722         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1723
1724 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1725
1726         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1727
1728 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1729
1730         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1731
1732 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
1733
1734         * makefile.vms: Update for alpha-opc changes.
1735
1736 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1737
1738         * i386-dis.c (print_insn_i386): Actually return the correct value.
1739         (ONE, OP_ONE): #ifdef out; not used.
1740
1741 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1742
1743         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1744         Changed subi operand type to treat 0 as 16.
1745
1746 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
1747
1748         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
1749         <rose@netcom.com>.
1750
1751 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
1752
1753         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1754         memory transfer instructions. Add new format string entries %h and %s.
1755         * arm-dis.c: (print_insn_arm): Provide decoding of the new
1756         formats %h and %s.
1757
1758 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1759
1760         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1761         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1762
1763 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
1764
1765         * alpha-dis.c (print_insn_alpha_osf): Remove.
1766         (print_insn_alpha_vms): Remove.
1767         (print_insn_alpha): Make globally visible.  Chose the register
1768         names based on info->flavour.
1769         * disassemble.c: Always return print_insn_alpha for the alpha.
1770
1771 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1772
1773         * d10v-dis.c (dis_long): Handle unknown opcodes.
1774
1775 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1776
1777         * d10v-opc.c: Changes to support signed and unsigned numbers.
1778         All instructions with the same name that have long and short forms
1779         now end in ".l" or ".s".  Divs added.
1780         * d10v-dis.c: Changes to support signed and unsigned numbers.
1781
1782 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1783
1784         * d10v-dis.c: Change all functions to use info->print_address_func.
1785
1786 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1787
1788         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1789         move ccr/sr insns more strict so that the disassembler only
1790         selects them when the addressing mode is data register.
1791
1792 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1793         * d10v-opc.c (pre_defined_registers):  Declare.
1794         * d10v-dis.c (print_operand): Now uses pre_defined_registers
1795         to pick a better name for the registers.
1796
1797 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
1798
1799         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
1800         operands for fexpand and fpmerge.  From Christian Kuehnke
1801         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1802
1803 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
1804
1805         * alpha-dis.c (print_insn_alpha): No longer the user-visible
1806         print routine.  Take new regnames and cpumask arguments.
1807         Kill the environment variable nonsense.
1808         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
1809         (print_insn_alpha_vms): New function.  Do VMS style regnames.
1810         * disassemble.c (disassembler): Test bfd flavour to pick
1811         between OSF and VMS routines.  Default to OSF.
1812
1813 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
1814
1815         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1816         * configure: Rebuild.
1817         * Makefile.in (install): Use @INSTALL_SHLIB@.
1818
1819 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1820
1821         * configure: (bfd_d10v_arch) Add new case.
1822         * configure.in: (bfd_d10v_arch) Add new case.
1823         * d10v-dis.c: New file.
1824         * d10v-opc.c: New file.
1825         * disassemble.c (disassembler) Add entry for d10v.
1826
1827 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1828
1829         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1830         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1831
1832 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
1833
1834         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
1835         distinguish between variants of the instruction set.
1836         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
1837         distinguish between variants of the instruction set.
1838
1839 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
1840
1841         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
1842         the 8086 instruction set.
1843         * i386-dis.c:  General cleanups.  Make most things static.  Add
1844         prototypes.  Get rid of static variables aflags and dflags.  Pass
1845         them as args (to almost everything).
1846
1847 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
1848
1849         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1850
1851         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1852
1853         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1854         if the next arg is marked with SRC_IN_DST.  Gross.
1855
1856         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1857         we're looking for and find EXR.
1858
1859         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1860         if we're looking for KBIT and we don't find it.
1861
1862         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1863         for L_3 and L_2.
1864
1865         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1866         3bit immediate operands.
1867
1868 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1869
1870         * Released binutils 2.7.
1871
1872         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
1873         <kkaempf@progis.ac-net.de>.
1874
1875 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1876
1877         * alpha-opc.c: Correct second case of "mov" to use OPRL.
1878
1879 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
1880
1881         * sparc-dis.c (print_insn_sparclite):  New routine to print
1882         sparclite instructions.
1883
1884 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1885
1886         * m68k-opc.c (m68k_opcodes): Add coldfire support.
1887
1888 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
1889
1890         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1891         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1892         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1893
1894 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1895
1896         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1897         Use autoconf-set values.
1898         (docdir, oldincludedir): Removed.
1899         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1900
1901 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
1902
1903         * alpha-opc.c: New file.
1904         * alpha-opc.h: Remove.
1905         * alpha-dis.c: Complete rewrite to use new opcode table.
1906         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1907         * configure: Rebuild with autoconf 2.10.
1908         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1909         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1910         alpha-opc.h.
1911         (alpha-opc.o): New target.
1912
1913 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
1914
1915         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1916         Set imm_added_to_rs1 even if the source and destination register
1917         are not the same.
1918
1919         * sparc-opc.c: Add some two operand forms of the wr instruction.
1920
1921 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
1922
1923         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1924         to just "mode".
1925
1926         * disassemble.c (disassembler): Handle H8/S.
1927         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1928
1929 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1930
1931         * sparc-opc.c: Add beq/teq as aliases for be/te.
1932
1933         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
1934         <sergei@msil.sps.mot.com>.
1935
1936 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
1937
1938         * makefile.vms: New file.
1939
1940         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1941
1942 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
1943
1944         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1945         regardless of plen.
1946
1947 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
1948
1949         * i386-dis.c (OP_OFF): Call append_prefix.
1950
1951 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1952
1953         * ppc-opc.c (instruction encoding macros): Add explicit casts to
1954         unsigned long to silence a warning from the Solaris PowerPC
1955         compiler.
1956
1957 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
1958
1959         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1960
1961 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
1962
1963         * sparc-dis.c (X_IMM,X_SIMM): New macros.
1964         (X_IMM13): Delete.
1965         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
1966         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1967         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
1968         cpush, cpusha, cpull sparclet insns.
1969
1970 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
1971
1972         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1973
1974 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1975
1976         * sparc-opc.c: Set F_FBR on floating point branch instructions.
1977         Set F_FLOAT on other floating point instructions.
1978
1979 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1980
1981         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1982         registers.
1983         (powerpc_opcodes): Add 860/821 specific SPRs.
1984
1985 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
1986
1987         * configure.in: Permit --enable-shared to specify a list of
1988         directories.  Set and substitute BFD_PICLIST.
1989         * configure: Rebuild.
1990         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
1991         uses.  Set to @BFD_PICLIST@.
1992
1993 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
1994
1995         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1996         not "abs", which may be needed for the absolute in something
1997         like btst #0,@10:8.  Print L_3 immediates separately from other
1998         immediates.  Change ABSMOV reference to ABS8MEM.
1999
2000 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
2001
2002         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2003         (current_arch_mask): New static global.
2004         (compute_arch_mask): New static function.
2005         (print_insn_sparc): Delete sparc_v9_p.  New static local
2006         current_mach.  Resort opcode table if current_mach changes.
2007         Generalize "insn not supported" test.
2008         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2009         Delete test for v9/!v9.
2010         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2011         (v6notlet): Define.
2012         (brfc): Split into CBR and FBR for coprocessor/fp branches.
2013         (brfcx): Renamed to FBRX.
2014         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
2015         coprocessor mnemonics are not supported on the sparclet).
2016         (condf): Renamed to CONDF.
2017         (SLCBCC2): Delete F_ALIAS flag.
2018
2019 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
2020
2021         * sparc-opc.c (sparc_opcodes): rd must be 0 for
2022         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
2023
2024 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
2025
2026         * Makefile.in (config.status): Depend upon BFD VERSION file, so
2027         that the shared library version number is set correctly.
2028
2029 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
2030
2031         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
2032         Miles Bader <miles@gnu.ai.mit.edu>.
2033         * configure: Rebuild.
2034
2035 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
2036
2037         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2038         malloc.
2039
2040 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2041
2042         * configure: Rebuild with autoconf 2.8.
2043
2044 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2045
2046         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2047         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2048
2049 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
2050
2051         * configure.in: Don't set SHLIB or SHLINK to an empty string,
2052         since they appear as targets in Makefile.in.
2053         * configure: Rebuild.
2054
2055 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
2056
2057         * mpw-make.sed: Edit out shared library support bits.
2058
2059 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
2060
2061         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2062         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2063         (sparc_opcodes): Add sparclet insns.
2064         (sparclet_cpreg_table): New static local.
2065         (sparc_{encode,decode}_sparclet_cpreg): New functions.
2066         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2067
2068 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
2069
2070         * i386-dis.c (index16): New static variable.
2071         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2072         other way around.
2073         (OP_indirE): Return result of OP_E.
2074         (OP_E): Check for 16 bit addressing mode, and disassemble
2075         correctly.  Optimised 32 bit case a little.  Don't print
2076         "(base,index,scale)" when sib specifies only an offset.
2077
2078 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
2079
2080         * configure.in: Set and substitute SHLIB_DEP.
2081         * configure: Rebuild.
2082         * Makefile.in (SHLIB_DEP): New variable.
2083         (LIBIBERTY_LISTS, BFD_LIST): New variables.
2084         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
2085         COMMON_SHLIB, add them to piclist with appropriate modifications.
2086         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
2087         here: just use piclist.
2088
2089 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
2090
2091         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2092         (print_insn_sparc): Rewrite v9/not-v9 tests.
2093         (compare_opcodes): Likewise.
2094         * sparc-opc.c (MASK_<ARCH>): Define.
2095         (v6,v7,v8,sparclite,v9,v9a): Redefine.
2096         (sparclet,v6notv9): Define.
2097         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
2098         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2099
2100 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
2101
2102         * configure.in: Call AC_PROG_CC before configure.host.
2103         * configure: Rebuild.
2104
2105         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2106
2107 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
2108
2109         * i386-dis.c (onebyte_has_modrm): New static array.
2110         (twobyte_has_modrm): New static array.
2111         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2112
2113 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2114
2115         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2116         $(SHLINK).
2117
2118 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2119
2120         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2121         doesn't conflict.
2122
2123 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2124
2125         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2126         m68010up, not just m68020up | cpu32.
2127
2128         * Makefile.in (SONAME): New variable.
2129         ($(SHLINK)): Make a link to the transformed name, as well.
2130         (stamp-tshlink): New target.
2131         (install): Skip stamp-tshlink during install.
2132
2133 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2134
2135         * configure.in: Call AC_ARG_PROGRAM.
2136         * configure: Rebuild.
2137         * Makefile.in (program_transform_name): New variable.
2138         (install): Transform library name before installing it.
2139
2140 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
2141
2142         * i960-dis.c (mem): Add HX dcinva instruction.
2143
2144         Support for building as a shared library, based on patches from
2145         Alan Modra <alan@spri.levels.unisa.edu.au>:
2146         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2147         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2148         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2149         * configure: Rebuild.
2150         * Makefile.in (ALLLIBS): New variable.
2151         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2152         (COMMON_SHLIB, SHLINK): New variables.
2153         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2154         (STAGESTUFF): Remove variable.
2155         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2156         (stamp-piclist, piclist): New targets.
2157         ($(SHLIB), $(SHLINK)): New targets.
2158         ($(OFILES)): Depend upon stamp-picdir.
2159         (disassemble.o): Build twice if PICFLAG is set.
2160         (MOSTLYCLEAN): Add pic/*.o.
2161         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2162         (distclean): Remove pic and stamp-picdir.
2163         (install): Install shared libraries.
2164         (stamp-picdir): New target.
2165
2166 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
2167
2168         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2169         Print unknown instruction as "unknown", rather than in hex.
2170
2171 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
2172
2173         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2174
2175 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
2176
2177         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2178
2179 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
2180
2181         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2182         when necessary.  From Ulrich Drepper
2183         <drepper@myware.rz.uni-karlsruhe.de>.
2184
2185 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2186
2187         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2188         sparc_num_opcodes.  Update architecture enum values.
2189         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2190         (sparc_opcode_lookup_arch): New function.
2191         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2192         (sparc_opcodes): Add v9a shutdown insn.
2193
2194 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
2195
2196         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2197         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
2198         architecture.
2199         (print_insn_sparc64): Deleted.
2200         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2201         print_insn_sparc.
2202
2203         * sparc-opc.c (architecture_pname): Add v9a.
2204
2205 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
2206
2207         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2208         incorrectly defined as 0x16 when it should be 0x15.
2209         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2210         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
2211         excb (exception barrier) which is defined in the Alpha
2212         Architecture Handbook version 2.
2213         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2214         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
2215         disassembled as or, for example.
2216
2217 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
2218
2219         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2220         (_print_insn_mips): Change i from int to unsigned int.
2221
2222 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
2223
2224         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2225         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
2226
2227 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
2228
2229         * i386-dis.c: Added Pentium Pro instructions.
2230
2231 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2232
2233         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2234         being for Power2.
2235
2236 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2237
2238         * sh-opc.h (sh_nibble_type): Added REG_B.
2239         (sh_arg_type): Added A_REG_B.
2240         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2241         and stc.l opcodes.
2242         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2243
2244 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2245
2246         * disassemble.c (disassembler): Use new bfd_big_endian macro.
2247
2248 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2249
2250         * Makefile.in (distclean): Remove stamp-h.  From Ronald
2251         F. Guilmette <rfg@monkeys.com>.
2252
2253 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
2254
2255         From David Mosberger-Tang  <davidm@azstarnet.com>:
2256         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2257         instruction.
2258
2259 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2260
2261         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2262         (sh_table): Added many SH3 opcodes.
2263         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2264
2265 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2266
2267         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2268         (subco,subco.): Mark this PPC, not PPCCOM.
2269
2270 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
2271
2272         * configure: Rebuild with autoconf 2.7.
2273
2274 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2275
2276         * configure: Rebuild with autoconf 2.6.
2277
2278 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
2279
2280         * configure.in: Sort list of architectures.  Accept but do nothing
2281         for alliant, convex, pyramid, romp, and tahoe.
2282
2283 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
2284
2285         * a29k-dis.c (print_special): Change num to unsigned int.
2286
2287 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
2288
2289         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2290         shifting it.
2291
2292 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2293
2294         * configure.in: Call AC_CHECK_PROG to find and cache AR.
2295         * configure: Rebuilt.
2296
2297 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
2298
2299         * configure.in: Add case for bfd_i860_arch.
2300         * configure: Rebuild.
2301
2302 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2303
2304         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2305         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2306         (NEXTDOUBLE): Likewise.
2307         (print_insn_m68k): Don't match fmoveml if there is more than one
2308         register in the list.
2309         (print_insn_arg): Handle a place of '8' for a type of 'L'.
2310
2311 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2312
2313         * m68k-opc.c: Use #W rather than #w.
2314         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2315
2316 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2317
2318         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2319         and likewise for all the dbxx opcodes.
2320
2321 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
2322
2323         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2324
2325 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
2326
2327         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2328         the VR4100 specific instructions to the mips_opcodes structure.
2329
2330 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
2331
2332         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2333         ugly Metrowerks bug in CW6, is fixed in CW7.
2334
2335 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2336
2337         * ppc-opc.c (whole file): Add flags for common/any support.
2338
2339 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
2340
2341         * Makefile.in (BISON): Remove macro.
2342         (FLAGS_TO_PASS): Remove BISON.
2343
2344 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
2345
2346         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2347
2348         * m68k-dis.c (print_insn_m68k): Recognize all two-word
2349         instructions that take no args by looking at the match mask.
2350         (print_insn_arg): Always print "%" before register names.
2351         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2352         [case '_']: Don't print "@#" before address.
2353         [case 'J']: Use "%s" as format string, not register name.
2354         [case 'B']: Treat place == 'C' like 'l' and 'L'.
2355
2356 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
2357
2358         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2359         name correctly.
2360
2361 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
2362
2363         From David Mosberger-Tang  <davidm@azstarnet.com>
2364
2365         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2366         (alpha_insn_set): added definitions for VAX floating point
2367         instructions (Unix compilers don't generate these, but handcoded
2368         assembly might still use them).
2369
2370         * alpha-dis.c (print_insn_alpha): added support for disassembling
2371         the miscellaneous instructions in the Alpha instruction set.
2372
2373 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
2374
2375         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2376         no longer create sysdep.h, sed ppc-opc.c to work around a
2377         serious Metrowerks C bug.
2378         * mpw-make.in: Remove.
2379         * mpw-make.sed: New file, used by mpw-configure to edit
2380         Makefile.in into an MPW makefile.
2381
2382 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
2383
2384         * Makefile.in (maintainer-clean): New synonym for realclean.
2385
2386 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2387
2388         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2389         which use '0', '1', and '2' instead.  Specify the proper size for
2390         a pmove immediate operand.  Correct the pmovefd patterns to be
2391         moves to a register, not from a register.
2392         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2393
2394 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
2395
2396         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2397         %psr, %wim, %tbr as F_NOTV9.
2398
2399 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
2400
2401         * Makefile.in (Makefile): Just rebuild Makefile when running
2402         config.status.
2403         (config.h, stamp-h): New targets.
2404         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2405         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
2406         rebuilding config.h.
2407         * configure: Rebuild.
2408
2409         * mips-opc.c: Change unaligned loads and stores with "t,A"
2410         operands to use "t,A(b)".
2411
2412 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2413
2414         * sh-dis.c (print_insn_shx): Add F_FR0 support.
2415
2416 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2417
2418         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2419         until 3 instead of until 2.
2420
2421 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2422
2423         * Makefile.in (ALL_CFLAGS): Define.
2424         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2425         (MOSTLYCLEAN): Add config.log.
2426         (distclean): Don't remove config.log.
2427         * configure.in: Substitute HDEFINES.
2428         * configure: Rebuild.
2429
2430 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2431
2432         * sh-opc.h (sh_arg_type): Add F_FR0.
2433         (sh_table, case fmac): Add F_FR0 as first argument.
2434
2435 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2436
2437         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2438
2439 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
2440
2441         * sparc-dis.c: Remove all references to NO_V9.
2442
2443 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
2444
2445         * aclocal.m4: Just include ../bfd/aclocal.m4.
2446         * configure: Rebuild.
2447
2448 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
2449
2450         * sparc-dis.c (X_DISP19): Define.
2451         (print_insn, case 'G'): Use it.
2452         (print_insn, case 'L'): Sign extend displacement.
2453
2454 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
2455
2456         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2457         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
2458         host_makefile_frag or frags.
2459         * aclocal.m4: New file.
2460         * configure: Rebuild.
2461         * Makefile.in (INSTALL): Set to @INSTALL@.
2462         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2463         (INSTALL_DATA): Set to @INSTALL_DATA@.
2464         (AR): Set to @AR@.
2465         (AR_FLAGS): Set to rc rather than qc.
2466         (CC): Define as @CC@.
2467         (CFLAGS): Set to @CFLAGS@.
2468         (@host_makefile_frag@): Remove.
2469         (config.status): Remove dependency upon @frags@.
2470
2471         * configure.in: ../bfd/config.bfd now just sets shell variables.
2472         Use them rather than looking through target Makefile fragments.
2473         * configure: Rebuild.
2474
2475 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2476
2477         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2478
2479 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
2480
2481         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2482         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2483         sparc64 insns.
2484
2485         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2486         (lookup_{name,value}): New functions.
2487         (prefetch_table): New static local.
2488         (sparc_{encode,decode}_prefetch): New functions.
2489         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2490
2491 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2492
2493         * sh-opc.h: Add blank lines to improve readabililty of sh3e
2494         instructions.
2495
2496 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2497
2498         * sh-dis.c: Correct comment on first line of file.
2499
2500 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
2501
2502         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2503
2504         * sparc-opc.c (asi, membar): New static locals.
2505         (sparc_{encode,decode}_{asi,membar}): New functions.
2506         (sparc_opcodes, membar insn): Fix.
2507         * sparc-dis.c (print_insn): Call sparc_decode_asi.
2508         Support decoding of membar masks.
2509         (X_MEMBAR): Define.
2510
2511 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
2512
2513         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2514
2515 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2516
2517         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2518         and likewise for the other branches.  Add bhs as an alias for bcc,
2519         and likewise for the size variants.  Add dbhs as an alias for
2520         dbcc.
2521
2522 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
2523
2524         * sh-opc.h (FP sts instructions): Update to match reality.
2525
2526 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
2527
2528         * m68k-dis.c: (fpcr_names): Add % before all register names.
2529         (reg_names): Likewise.
2530         (print_insn_arg): Don't explicitly print % before register names.
2531         Add % before register names in static array names.  In case 'r',
2532         print data registers as `@(Dn)', not `Dn@'.  When printing a
2533         memory address, don't print @# before it.
2534         (print_indexed): Change base_disp and outer_disp from int to
2535         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
2536         syntax.  Sign extend 8 byte displacement correctly.
2537         (print_base): Print using MIT syntax.  Print zpc when appropriate.
2538         Change parameter disp from int to bfd_vma.
2539
2540         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2541         for jsr.
2542
2543 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2544
2545         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2546         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2547         * sh-opc.h (sh_arg_type): Add new operand types.
2548         (sh_table): Add new opcodes from SH3E Floating Point ISA.
2549
2550 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2551
2552         * Makefile.in (distclean): Remove generated file config.h.
2553
2554 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2555
2556         * Makefile.in (distclean): Remove generated file config.h.
2557
2558 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
2559
2560         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2561         Clean up tables.
2562         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2563         (opcode): Remove.
2564         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
2565         rather than numopcodes.  Use m68k_opcodes rather than removed
2566         opcode function.  Don't check F_ALIAS.
2567         (print_insn_arg): Change first parameter to be const char *.
2568         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2569         (m68k-opc.o): New target.
2570         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2571         * configure: Rebuild.
2572
2573 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
2574
2575         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2576         (opcode_bits, opcode_hash_table): New variables.
2577         (opcodes_initialized): Renamed from opcodes_sorted.
2578         (build_hash_table): New function.
2579         (is_delayed_branch): Use hash table.
2580         (print_insn): Renamed from print_insn_sparc, made static.
2581         Build and use hash table.  If !sparc64, ignore sparc64 insns,
2582         and vice-versa if sparc64.
2583         (print_insn_sparc, print_insn_sparc64): New functions.
2584         (compare_opcodes): Move sparc64 opcodes to end.
2585         Print commutative insns with constant second.
2586         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2587
2588 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2589
2590         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
2591         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
2592         avoids printing a delay slot in a delay slot.
2593         * sh-opc.h (sh_table): Fully bracket last entry.
2594
2595 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
2596
2597         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2598
2599 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
2600
2601         * configure.in: Get host_makefile_frag from ${srcdir}.
2602
2603         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
2604         config.h from config.in.  Don't set up sysdep.h link.
2605         * sysdep.h: New file.
2606         * configure, config.in: New files, generated from configure.in.
2607         * Makefile.in: Updated to be processed autoconf-style.
2608         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
2609         (Makefile): Depend on config.status.
2610         (config.status): New rule.
2611         * configure.bat: Update Makefile substitutions.
2612
2613 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
2614
2615         * mips-opc.c (L1): Define.
2616         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2617         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2618         and wb.
2619
2620 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2621
2622         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2623         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2624         have multiple add units but only a single logical unit.
2625
2626         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2627         shifted by 18, without any insertion or extraction function.
2628         (insert_cr, extract_cr): Remove.
2629
2630 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2631
2632         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2633         register names.
2634
2635 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
2636
2637         * mpw-config.in: Add sh and i386 configs, remove sparc config.
2638         * sh-opc.h: Add copyright.
2639
2640 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
2641
2642         * Makefile.in (crunch-m68k): Delete extra target accidentally
2643         checked in a while ago.
2644
2645 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2646
2647         * sh-opc.h (sh_table): Add SH3 support.
2648
2649 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
2650
2651         * sh-opc.h: Added bsrf and braf.
2652
2653 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2654
2655         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
2656         bogus [ls]fm{ea,fd} patterns.
2657
2658         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2659         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2660         initialize it from memory.  Make function static.
2661         (print_insn_{big,little}_arm): New functions.
2662         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2663         the correct endianness.
2664
2665 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
2666
2667         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2668         enum list.
2669
2670 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2671
2672         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2673         17th, so that it builds again using GCC as the compiler.
2674
2675 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2676
2677         * mips-dis.c (print_insn_little_mips): Cast return value from
2678         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2679         expects an unsigned long, and that might be fewer words of
2680         argument storage (e.g., if bfd_vma is long long on a 32-bit
2681         machine).
2682         (print_insn_big_mips): Likewise with bfd_getb32 value.
2683         (_print_insn_mips): Now static.
2684
2685 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
2686
2687         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2688         gcc memory hog problem with initializer is fixed.
2689
2690 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
2691
2692         Merge in support for Mac MPW as a host.
2693         (Old change descriptions retained for informational value.)
2694
2695         * mpw-config.in (archname): Compute from the config.
2696         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2697
2698         * mpw-config.in (target_arch): Compute from canonical target.
2699         (m68k, mips, powerpc, sparc): Add architectures.
2700         * mpw-make.in (disassemble.c.o): Add.
2701         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2702
2703         * mpw-config.in (BFD_MACHINES): Set to a default value.
2704         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2705
2706         * mpw-make.in (CSEARCH): Add extra-include to search path.
2707
2708         * mpw-config.in (varargs.h): Don't create.
2709         (sysdep.h): Create using forward-include.
2710         * mpw-make.in (CSEARCH): Add include/mpw to search path.
2711
2712         * mpw-config.in: New file, MPW version of configure.in.
2713         * mpw-make.in: New file, MPW version of Makefile.in.
2714
2715 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2716
2717         * alpha-dis.c (print_insn_alpha): Put empty statement after
2718         default label.
2719
2720 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2721
2722         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2723         (low_sign_extend): Likewise.
2724         (get_field): Delete unused function.
2725         (set_field, deposit_14, deposit_21): Likewise.
2726
2727 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2728
2729         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
2730           (guy@netapp.com).
2731
2732 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
2733
2734         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
2735
2736         * alpha-opc.h (OSF_ASMCODE): define
2737         print pal-code names as defined in App C of the
2738         Alpha Architecture Reference Manual
2739
2740         * alpha-dis.c: cleaned up output
2741         print stylized code forms as defined in App A.4.3 of the
2742         Alpha Architecture Reference Manual
2743
2744 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
2745
2746         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
2747         `rfe'.
2748         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2749         'N', and 'M'.
2750
2751 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2752
2753         * m68k-dis.c (opcode): New function.  Returns address of opcode
2754         table entry given index, even if the opcode table was split to
2755         work around gcc bugs.
2756         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2757         directly.
2758         (BREAK_UP_BIG_DECL): Make secondary array static and const.
2759         (reg_names): Now const.
2760         (print_insn_arg): Arrays cacheFieldName and names now const.
2761         (print_indexed): Array scales now const.
2762
2763 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
2764
2765         * ppc-opc.c: Sort recently added instructions by minor opcode
2766         number within major opcode number.
2767
2768 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
2769
2770         * hppa-dis.c: Include libhppa.h.
2771
2772 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2773
2774         * mips-opc.c: Change dli to use M_DLI, and add dla.
2775
2776 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2777
2778         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
2779
2780 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
2781
2782         * mips-opc.c: Add r4650 mul instruction.
2783
2784 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
2785
2786         * mips-opc.c: Add uld and usd macros for unaligned double load and
2787         store.
2788
2789 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2790
2791         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2792         mfdcr, mtdcr, icbt, iccci.
2793
2794 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
2795
2796         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2797         signed char fields to shorts, more portable.
2798
2799 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2800
2801         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2802         char fields as signed chars, since they may have negative values.
2803
2804 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2805
2806         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2807           (mycroft@netbsd.org).
2808
2809 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
2810
2811         From "Logg, Ed" <elogg@ea.com>:
2812         * ppc-opc.c (extract_bdm): Correct parenthezisation.
2813         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2814         value.
2815
2816 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
2817
2818         * ppc-opc.c: Changes based on patch from David Edelsohn
2819         <edelsohn@mhpcc.edu>.
2820         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2821         SPR.
2822         (FXM_MASK): Define.
2823         (insert_tbr): New static function.
2824         (extract_tbr): New static function.
2825         (XFXFXM_MASK, XFXM): Define.
2826         (XSPRBAT_MASK, XSPRG_MASK): Define.
2827         (powerpc_opcodes): Add instructions to access special registers by
2828         name.  Add mtcr and mftbu.
2829
2830 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2831
2832         * mips-opc.c (P3): Define.
2833         (mips_opcodes): Add mad and madu.
2834
2835 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
2836
2837         * configure.in: Add W65 support.
2838         * disassemble.c: Likewise.
2839         * w65-opc.h, w65-dis.c: New files.
2840
2841 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2842
2843         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2844         immediates.
2845
2846 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2847
2848         * mips-opc.c: Add dli as a synonym for li.
2849
2850 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2851
2852         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2853         print something for reserved opcode values, even if it won't
2854         assemble again.
2855
2856         * mips-dis.c (_print_insn_mips): When initializing, shift right
2857         and mask, to avoid sign extension problems on the Alpha.
2858
2859         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2860         control registers.
2861
2862 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2863
2864         * sh-opc.h (mov.l gbr): Get direction right.
2865         * sh-dis.c (print_insn_shx): New function.
2866         (print_insn_shl, print_insn_sh): Call print_insn_shx to
2867         print opcodes with right byte order.
2868
2869 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2870
2871         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2872         to avoid conflicts with getopt.
2873
2874 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2875
2876         * hppa-dis.c (print_insn_hppa): Read the instruction using
2877         bfd_getb32, so that it works on a little endian or 64 bit host.
2878         Remove unused local variable op.
2879
2880 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2881
2882         * mips-opc.c: Use or instead of addu for pseudo-op move, since
2883         addu does not work correctly if -mips3.
2884
2885 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2886
2887         * a29k-dis.c (print_special): Add special register names defined
2888         on 29030, 29040 and 29050.
2889         (print_insn): Handle new operand type 'I'.
2890
2891 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2892
2893         * Makefile.in (INSTALL): Use top level install.sh script.
2894
2895 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2896
2897         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2898         that it works on a little endian host.
2899
2900 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2901
2902         * configure.in: Use ${config_shell} when running config.bfd.
2903
2904 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2905
2906         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2907
2908 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2909
2910         * a29k-dis.c (print_insn): Print the opcode.
2911
2912 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2913
2914         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2915
2916 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
2917
2918         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2919
2920 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2921
2922         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2923         which store a value into memory.
2924
2925 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2926
2927         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2928         * arm-dis.c, arm-opc.h: New files.
2929
2930 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
2931
2932         * Makefile.in (ns32k-dis.o): Add dependency.
2933         * ns32k-dis.c (print_insn_arg): Declare initialized local as
2934         string, not as array of chars.
2935
2936 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2937
2938         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2939
2940         * sparc-opc.c: Added sparclite extended FP operations, and
2941         versions of v9 impdep* instructions permitting specification of
2942         the OPF field.
2943
2944 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2945
2946         * i960-dis.c (reg_names): Now const.
2947         (struct sparse_tabent): New type, copied from array type in mem
2948         function.
2949         (ctrl): Local static array ctrl_tab now const.
2950         (cobr): Local static array cobr_tab now const.
2951         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
2952         static variable mem_tab no longer explicitly initialized.  Changed
2953         mem_init to const array of struct sparse_tabent.
2954         (reg): Local static variable reg_tab no longer explicitly
2955         initialized.  Changed reg_init to const array of struct
2956         sparse_tabent.
2957         (ea): Local static array scale_tab now const.
2958
2959         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2960         (REG_MAX): Updated.
2961
2962 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
2963
2964         * configure.bat: the disassember needs to be enabled for
2965         "objdump -d" to work in djgpp.
2966
2967 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2968
2969         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2970         (invalid_float): Enabled general version, doesn't require running
2971         on ns32k host.  Changed to take char* argument, and test for
2972         explicitly specified sizes, instead of using sizeof() on host CPU
2973         types.
2974         (INVALID_FLOAT): Cast first argument.
2975         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2976         list_P032, list_M032): Now const.
2977         (optlist, list_search): Made appropriate arguments now point to
2978         const.
2979         (print_insn_arg): Changed static array of one-character-string
2980         pointers into a static const array of characters; fixed sprintf
2981         statement accordingly.
2982
2983 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
2984
2985         * ns32k-dis.c: Semi-new file.  Had apparently been dropped
2986         from distribution. A ns32k-dis.c from a previous distribution has
2987         been brought up to date and supports the new interface.
2988
2989         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2990
2991         * configure.in: add bfd_ns32k_arch target support.
2992
2993         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2994         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2995
2996 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
2997
2998         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2999         disassembly right.
3000
3001 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
3002
3003         * h8300-dis.c, mips-dis.c: Don't use true and false.
3004
3005 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
3006
3007         * configure.in: Change --with-targets to --enable-targets.
3008
3009 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3010
3011         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3012         opcodes to the first instruction with that opcode, to speed
3013         disassembly of large files.  From ralphc@pyramid.com (Ralph
3014         Campbell).
3015
3016 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3017
3018         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3019
3020 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
3021
3022         * configure.bat: update to latest makefile.in
3023
3024 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
3025
3026         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3027         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3028         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3029         slot insn is in a delay slot.
3030         * z8k-opc.h: (resflg): Fix patterns.
3031         * h8500-opc.h Fix CR insn patterns.
3032
3033 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3034
3035         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3036         "cmpl" before POWER versions, so that gas -many uses them.
3037
3038 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3039
3040         * disassemble.c: New file.
3041         * Makefile.in (OFILES): Add disassemble.o.
3042         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3043         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
3044         binutils/configure.in.
3045
3046         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3047         opcode being examined.
3048
3049 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3050
3051         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3052         (insert_ral, insert_ram, insert_ras): New functions.
3053         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3054         RAS for store with update.
3055
3056 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3057
3058         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
3059         (edelsohn@npac.syr.edu).
3060
3061 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3062
3063         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3064         immediate argument.
3065
3066 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
3067
3068         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3069
3070 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3071
3072         * ppc-opc.c (powerpc_operands): The signedp field has been
3073         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
3074         instead.  Add new operand SISIGNOPT.
3075         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3076         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3077         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3078         than signedp field.
3079
3080 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3081
3082         * i386-dis.c (struct private):  Renamed to dis_private. `private'
3083         is a reserved word for dynix cc.
3084
3085 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3086
3087         * configure.in: Change error message to refer to bfd/config.bfd
3088         rather than bfd/configure.in.
3089
3090 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
3091
3092         * ppc-opc.c: Define POWER2 as short alias flag.
3093         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3094         fsqrt.
3095
3096 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3097
3098         * i960-dis.c (print_insn_i960): Don't read a second word for
3099         opcodes 0, 1, 2 and 3.
3100
3101 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3102
3103         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3104
3105 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3106
3107         * m68881-ext.c: Removed; no longer used.
3108         * Makefile.in: Changed accordingly.
3109
3110         * m68k-dis.c (ext_format_68881): Don't declare.
3111         (print_insn_m68k): If an instruction uses place 'i', it uses at
3112         least four fixed bytes.
3113         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
3114         extended float, convert to double using floatformat_to_double, not
3115         ieee_extended_to_double, and fetch the data before converting it.
3116
3117 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3118
3119         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
3120         davidj@ICSI.Berkeley.EDU (David Johnson).
3121
3122 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3123
3124         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3125         PowerPC uses bdnz[l][a].
3126
3127 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3128
3129         * dis-buf.c, i386-dis.c:  Include sysdep.h.
3130
3131 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3132
3133         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3134
3135         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3136         by Motorola PowerPC 601 with PPC_OPCODE_601.
3137         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3138         Disassemble Motorola PowerPC 601 instructions as well as normal
3139         PowerPC instructions.
3140
3141 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3142
3143         * i960-dis.c (reg, mem): Just use a static array instead of
3144         calling xmalloc.
3145
3146 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3147
3148         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3149         condition name index if this is for a negated condition.
3150
3151         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3152         Floating point format for 'H' operand is backwards from normal
3153         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
3154         operands (fmpyadd and fmpysub), handle bizarre register
3155         translation correctly for single precision format.
3156
3157         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3158         or 'I' operands if the next format specifier is 'M' (fcmp
3159         condition completer).
3160
3161 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3162
3163         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3164         single number giving a bitmask for the MB and ME fields of an M
3165         form instruction.  Change NB to accept 32, and turn it into 0;
3166         also turn 0 into 32 when disassembling.  Seperated SH from NB.
3167         (insert_mbe, extract_mbe): New functions.
3168         (insert_nb, extract_nb): New functions.
3169         (SC_MASK): Mask out SA and LK bits.
3170         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3171         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
3172         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
3173         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3174         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3175         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
3176         (powerpc_macros): Define table of macro definitions.
3177         (powerpc_num_macros): Define.
3178
3179         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3180         if PPC_OPERAND_NEXT is set.
3181
3182 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3183
3184         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3185         char.  Retrieve contents using bfd_getl32 instead of shifting.
3186
3187 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3188
3189         * ppc-opc.c: New file.  Opcode table for PowerPC, including
3190         opcodes for POWER (RS/6000).
3191         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
3192         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3193         (CFILES): Add ppc-dis.c.
3194         (ppc-dis.o, ppc-opc.o): New targets.
3195         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3196
3197 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3198
3199         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3200         No space before 'u', 'f', or 'N'.
3201
3202 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3203
3204         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3205         farther than we should.
3206
3207         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3208
3209 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3210
3211         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3212
3213 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3214
3215         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3216         needs it, to prevent reading past the end of a section.
3217
3218 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3219
3220         * mips-opc.c: Use macro for j instruction, to support SVR4 PIC.
3221         Removed t,A case for la; always use t,A(b) case.
3222
3223 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3224
3225         From Ted Lemen <mellon@pepper.ncd.com>
3226         * mips-dis.c (print_insn_arg): Handle 'k'.
3227         * mips-opc.c: Make cache use k, not t.
3228
3229 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3230
3231         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
3232         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3233         FLOAT_FORMAT_CODE to put out floating point register names.
3234
3235 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3236
3237         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3238
3239 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3240
3241         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3242
3243 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3244
3245         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3246         larger than 32.  Moved dsxx32 variants first for disassembler.
3247
3248 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3249
3250         * z8kgen.c, z8k-opc.h: Add full lda information.
3251
3252 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
3253
3254         * hppa-dis.c (print_insn_hppa): Do not emit a space after
3255         movb instructions.  Any necessary space will be emitted by
3256         the code to handle nullification completers.
3257
3258 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3259
3260         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3261
3262 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3263
3264         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
3265         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
3266
3267 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3268
3269         * mips-opc.c: Correct lwu opcode value (book had it wrong).
3270
3271 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3272
3273         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3274         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3275
3276 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
3277
3278         * m88k-dis.c (m88kdis): comment change.  Remove space after
3279           printing mnemonic.
3280           (printop): handle new arg types DEC and XREG for m88110.
3281
3282 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
3283
3284         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3285         type for absolute branch addresses.  Delete special
3286         "ble" and "be" code in 'W' operand code.
3287
3288 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3289
3290         * mips-opc.c: Set hazard information correctly for branch
3291         likely instructions.
3292
3293 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3294
3295         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
3296         info->fprintf_func for printing and info->print_address_func for
3297         address output.
3298
3299 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3300
3301         * mips-opc.c: Set INSN_TRAP for tXX instructions.
3302
3303 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3304
3305         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3306         Corrected second case of "b" for disassembler.
3307
3308 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3309
3310         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
3311         to BFD swapping routines to correspond to BFD name changes.
3312
3313 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3314
3315         * mips-opc.c: Change div machine instruction to be z,s,t rather
3316         than s,t.  Change div macro to be d,v,t rather than d,s,t.
3317         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
3318         rem and remu which generates only the corresponding div
3319         instruction.  This is for compatibility with the MIPS assembler,
3320         which only generates the simple machine instruction when an
3321         explicit destination of $0 is used.
3322         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3323
3324 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3325
3326         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3327         WR_31 hazard for bal, bgezal, bltzal.
3328
3329 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3330
3331         * hppa-dis.c (print_insn_hppa): Use print function
3332         from within the disassemble_info, not fprintf_filtered.
3333
3334 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3335
3336         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
3337         Law, law@cs.utah.edu.)
3338
3339 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3340
3341         * mips-opc.c ("absu"): Removed.
3342         ("dabs"): Added.
3343
3344 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3345
3346         * mips-opc.c: Added r6000 and r4000 instructions and macros.
3347         Changed hazard information to distinguish between memory load
3348         delays and coprocessor load delays.
3349
3350 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3351
3352         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
3353
3354 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3355
3356         * configure.in: Don't pass cpu to config.bfd.
3357
3358 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3359
3360         * m88k-dis.c (m88kdis): Make class unsigned.
3361
3362 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
3363
3364         * alpha-dis.c (print_insn_alpha): One branch format case was
3365         missing the instruction name.
3366
3367 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3368
3369         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3370         Add the arch-specific auxiliary files.
3371         (OFILES): Remove the arch-specific auxiliary files
3372         and use BFD_MACHINES instead of DIS_LIBS.
3373         * configure.in: Set BFD_MACHINES based on --with-targets option.
3374
3375 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3376
3377         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
3378         for swc1.
3379
3380 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3381
3382         * sparc-opc.c: Change CONST to const to deal with gcc
3383         -Dconst=__const -traditional.
3384
3385 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3386
3387         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3388         coprocessor instructions out of #if 0, and made them use new
3389         argument type "C".
3390
3391 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3392
3393         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3394
3395 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
3396
3397         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3398         instruction, for use by the disassembler.
3399
3400         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
3401         hand-coded sign extensions that depended on 32-bit host ints.
3402         FIXME, we still depend on big-endian host bitfield ordering.
3403         (sparc_print_insn):  Set the insn_info_valid field, and the
3404         other fields that describe the instruction being printed.
3405
3406 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
3407
3408         * sparc-opc.c (call): Accept all 6 addressing modes valid for
3409         `jmp' instead of just one of them.
3410
3411 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3412
3413         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3414         (fput_fp_reg_r): Renamed from fput_reg_r.
3415         (fput_fp_reg): New function.
3416         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3417
3418         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3419
3420         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3421
3422 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3423
3424         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3425
3426         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3427         don't output a space.
3428
3429         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3430
3431 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
3432
3433         * mips-opc.c: New file, containing opcode table from
3434         ../include/opcode/mips.h.
3435         * Makefile.in: Add it.
3436
3437 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3438
3439         * m88k-dis.c: New file, moved in from gdb and changed to use the
3440         new dis-asm.h disassembler interface.
3441         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3442         (m88k-dis.o): New target.
3443
3444 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
3445
3446         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3447         argument string const char * to correspond to opcode/mips.h.
3448
3449 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
3450
3451         * mips-dis.c: Updated to account for name changes in new version
3452         of opcode/mips.h.
3453         * Makefile.in: Added header file dependencies.
3454
3455 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
3456
3457         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3458
3459 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3460
3461         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3462         extend, rather than shifts.
3463
3464 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
3465
3466         * Makefile.in: Undo 15 June change.
3467
3468 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
3469
3470         * m68k-dis.c (print_insn_arg):  Change return value to byte count
3471         or error code.
3472         * m68k-dis.c:  Re-write to detect invalid operands before
3473         printing anything, so we can handle this the same way we
3474         handle invalid opcodes.
3475
3476 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3477
3478         * sh-dis.c, sh-opc.h: Understand some more opcodes.
3479
3480 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
3481
3482         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3483         header files.
3484
3485 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3486
3487         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3488
3489         * configure.in: Do make sysdep.h link.
3490         * Makefile.in: Search ../include.  Don't search ../bfd.
3491
3492 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
3493
3494         Changes from Jeff Law, law@cs.utah.edu:
3495         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
3496         Do not print a space before the completers specified by
3497         'a' and 'd'.
3498
3499 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
3500
3501         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3502         defined, since gdb has been fixed.
3503
3504         Changes from Jeff Law, law@cs.utah.edu:
3505         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3506         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3507         be a *disassemble_info, not a *FILE.
3508         * hppa-dis.c: Support 'd', '!', and 'a'.
3509         * hppa-dis.c: Support 's' to extract a 2 bit space register.
3510         * hppa-dis.c: Delete cases which are no longer needed.
3511
3512 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
3513
3514         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3515
3516 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3517
3518         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3519         H8/300-H opcodes.
3520
3521 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
3522
3523         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3524         * configure.in:  No longer need to configure to get sysdep.h.
3525
3526 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
3527
3528         * Patches from Jeffrey Law <law@cs.utah.edu>.
3529         * hppa-dis.c: Support 'I', 'J', and 'K' in output
3530         templates for 1.1 FP computational instructions.
3531
3532 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3533
3534         * h8500-dis.c (print_insn_h8500): Address argument is type
3535         bfd_vma.
3536         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3537         Ditto.
3538
3539         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3540         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3541
3542         * sparc-dis.c (compare_opcodes): Move static declaration to
3543         top-level.
3544
3545 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3546
3547         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3548         instruction, remove unimp hack from 'l' argument.
3549
3550 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
3551
3552         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
3553         happy.
3554
3555 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
3556
3557         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3558         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3559         instructions.
3560
3561 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3562
3563         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
3564         arrays of string pointers to 2-d arrays of chars, to save
3565         space.
3566
3567 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
3568
3569         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3570         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3571
3572 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3573
3574         * hppa-dis.c: New file from Utah, adapted to new disassembler
3575         calling interface.
3576         * Makefile.in: Include it.
3577
3578 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3579
3580         * sh-dis.c, sh-opc.h: New files.
3581
3582 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3583
3584         * alpha-dis.c, alpha-opc.h: New files.
3585
3586 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3587
3588         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3589         value.
3590
3591 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
3592
3593         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3594
3595 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
3596
3597         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3598         const.
3599
3600 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
3601
3602         * sparc-dis.c: Use fprintf_func a few places where I forgot,
3603         and double percent signs a few places.
3604
3605         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3606
3607         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3608         Use info->print_address_func not print_address.
3609
3610         * dis-buf.c (generic_print_address): New function.
3611
3612 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3613
3614         * Makefile.in: Add sparc-dis.c.
3615         sparc-dis.c: New file, merges binutils and gdb versions as follows:
3616         From GDB:
3617             Add `add' instruction to the set that get checked
3618             for a preceding `sethi' in order to print an absolute address.
3619             * (print_insn):  Disassembly prefers real instructions.
3620             (is_delayed_branch):  Speed up.
3621             * sparc-opc.c: Add ALIAS bit to aliases.  Fix up opcode tables.
3622             Still missing some float ops, and needs testing.
3623             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3624             F_ALIAS.  Use printf, not fprintf, when not passing a file
3625             pointer...
3626             (compare_opcodes): Check that identical instructions have
3627             identical opcodes, complain otherwise.
3628         From binutils:
3629             * New 'm' arg.
3630             * Include reg_names.
3631         From neither:
3632             Use dis-asm.h/read_memory_func interface.
3633
3634 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
3635
3636         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3637           deliberately return non-zero to setjmp from longjmp.  Otherwise
3638           this code fails to compile.
3639
3640 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
3641
3642         * m68k-dis.c:  Fix prototype for fetch_arg().
3643
3644 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3645
3646         * dis-buf.c: New file, for new read_memory_func interface.
3647         Makefile.in (OFILES): Include it.
3648         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3649         Use new read_memory_func interface.
3650
3651 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3652
3653         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3654         * h8500-opc.h: Fix couple of opcodes.
3655
3656 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
3657
3658         * Makefile.in: add dvi & installcheck targets
3659
3660 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
3661
3662         * Makefile.in:  Update for h8500-dis.c.
3663
3664 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3665
3666         * h8500-dis.c, h8500-opc.h: New files
3667
3668 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
3669
3670         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
3671         ../include/dis-asm.h.
3672         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
3673         and ../gdb/m68k-pinsn.c).
3674         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
3675         and ../gdb/i386-pinsn.c).
3676         * m68881-ext.c:  New file.  Moved definition of
3677         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3678         * Makefile.in:  Adjust for new files.
3679         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
3680         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
3681         can be dis-assembled.
3682
3683 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3684
3685         * mips-dis.c (print_insn_arg): Now returns void.
3686
3687 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
3688
3689         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
3690         files that use the macros.
3691
3692 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3693
3694         * mips-dis.c: New file, from gdb/mips-pinsn.c.
3695         * Makefile.in (DIS_LIBS): Added mips-dis.o.
3696         (CFILES): Added mips-dis.c.
3697
3698 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3699
3700         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3701         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3702
3703 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
3704
3705         * Makefile.in:  Improve *clean rules.
3706         * configure.in:  Allow a default host.
3707
3708 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3709
3710         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3711         files include other sysdep files
3712
3713 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3714
3715         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3716
3717 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
3718
3719         * configure.in:  For host support, use ../bfd/configure.host
3720         so it stays in sync with the ../bfd/hosts database.
3721
3722 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3723
3724         * configure.in: use cpu-vendor-os triple instead of nested cases
3725
3726 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
3727
3728         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3729         *always* the wrong one.
3730
3731 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3732
3733         * z8kgen.c: added copyright info
3734
3735 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3736
3737         * z8k-dis.c (unparse_instr): prettier tabs
3738         * z8kgen.c z8k-opc.h: bug fixes in tables
3739
3740 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
3741
3742         * configure.in:  Add ncr* configuration.
3743         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
3744         picayune ANSI compilers happy.
3745
3746 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
3747
3748         * configure.in (i386):  Make i386 and i486 synonymous for now.
3749         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
3750
3751 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3752
3753         * Makefile.in (install): Fix typo.
3754
3755 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
3756
3757         * Makefile.in (make):  Remove obsolete crud.
3758         (sparc-opc.o):  Avoid Sun Make VPATH bug.
3759
3760 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
3761
3762         * Makefile.in: since there are no SUBDIRS, remove rule and
3763         references of subdir_do.
3764
3765 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3766
3767         * Makefile.in (install): Get the library name right here too.
3768         Don't install bfd.h, since it's unrelated to this library.  No
3769         subdirs to recurse into, either.
3770         (CFILES): The source file has a .c suffix, not .o.
3771
3772         * sparc-opc.c: New file, moved from BFD.
3773         * Makefile.in (OFILES): Build it.
3774
3775 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
3776
3777         * z8k-dis.c: fixed forward refferences of some declarations.
3778
3779 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
3780
3781         * Makefile.in: get the name of the library right
3782
3783 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3784
3785         * z8k-dis.c: knows how to disassemble z8k stuff
3786         * z8k-opc.h: new file full of z8000 opcodes
3787
3788 Fri Aug 28 15:38:03 1992  Ken Raeburn  (raeburn@cygnus.com)
3789
3790         * Renamed opc-sparc.c to sparc-opc.c for systems with short
3791         filename constraints.
3792         * Makefile.in: Updated to reflect change.
3793
3794 \f
3795 Copyright (C) 1992-1997 Free Software Foundation, Inc.
3796
3797 Copying and distribution of this file, with or without modification,
3798 are permitted in any medium without royalty provided the copyright
3799 notice and this notice are preserved.
3800
3801 Local Variables:
3802 mode: change-log
3803 left-margin: 8
3804 fill-column: 74
3805 version-control: never
3806 End: