sim/ChangeLog

   1 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
   2
   3         * avr/configure: Regenerate.
   4         * cris/configure: Regenerate.
   5         * microblaze/configure: Regenerate.
   6
   7 2010-01-02  Doug Evans  <dje@sebabeach.org>
   8
   9         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
  10         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
  11         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
  12         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
  13         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  14         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
  15
  16 2010-01-01  Doug Evans  <dje@sebabeach.org>
  17
  18         * cris/mloop.in: Fix copyright year update snafu.
  19
  20 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
  21
  22         * common/aclocal.m4: Add include of ../../config/zlib.m4.
  23         * common/common.m4: Use AM_ZLIB to check for zlib support.
  24         * ppc/configure.ac: Likewise.
  25         * arm/configure, avr/configure, common/configure, cr16/configure,
  26         cris/configure, d10v/configure, erc32/configure, frv/configure,
  27         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
  28         m32r/configure, m68hc11/configure, mcore/configure,
  29         microblaze/configure, mips/configure, mn10300/configure,
  30         moxie/configure, ppc/configure, sh/configure, sh64/configure,
  31         v850/configure: Regenerate.
  32
  33 2009-11-24  DJ Delorie  <dj@redhat.com>
  34
  35         * rx: New directory.
  36         * configure.ac: Add entry for Renesas RX.
  37         * configure: Regenerate.
  38
  39 2009-11-22  Doug Evans  <dje@sebabeach.org>
  40
  41         * cris/cpuall.h: Regenerate.
  42         * cris/cpuv10.h: Regenerate.
  43         * cris/cpuv32.h: Regenerate.
  44         * cris/decodev10.c: Regenerate.
  45         * cris/decodev10.h: Regenerate.
  46         * cris/decodev32.c: Regenerate.
  47         * cris/decodev32.h: Regenerate.
  48
  49 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  50
  51         * avr/interp.c (sim_write): Allow byte access.
  52         (sim_read): Ditto.
  53
  54 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  55
  56         * avr/interp.c (sim_load): Clear memory before loading.
  57
  58 2009-11-09  Tristan Gingold  <gingold@adacore.com>
  59
  60         * avr/interp.c (sim_resume): Fix typo for OP_ret.
  61
  62 2009-10-23  Doug Evans  <dje@sebabeach.org>
  63
  64         * cris/arch.c: Regenerate.
  65         * cris/arch.h: Regenerate.
  66         * cris/cpuall.h: Regenerate.
  67         * cris/cpuv10.c: Regenerate.
  68         * cris/cpuv10.h: Regenerate.
  69         * cris/cpuv32.c: Regenerate.
  70         * cris/cpuv32.h: Regenerate.
  71         * cris/cris-desc.c: Regenerate.
  72         * cris/cris-desc.h: Regenerate.
  73         * cris/cris-opc.h: Regenerate.
  74         * cris/decodev10.c: Regenerate.
  75         * cris/decodev10.h: Regenerate.
  76         * cris/decodev32.c: Regenerate.
  77         * cris/decodev32.h: Regenerate.
  78         * cris/modelv10.c: Regenerate.
  79         * cris/modelv32.c: Regenerate.
  80         * cris/semcrisv10f-switch.c: Regenerate.
  81         * cris/semcrisv32f-switch.c: Regenerate.
  82
  83 2009-10-22  Tristan Gingold  <gingold@adacore.com>
  84
  85         * avr/interp.c (sim_stop): Return 1.
  86
  87 2009-10-16  Doug Evans  <dje@sebabeach.org>
  88
  89         * MAINTAINERS: Add myself as m32r maintainer.
  90
  91 2009-10-15  Michael Egaer  <eager@eagercon.com>
  92
  93         * MAINTAINERS: Add self as MicroBlaze maintainer.
  94
  95 2009-10-14  Ben Elliston  <bje@gnu.org>
  96
  97         * MAINTAINERS (common): Move myself to "past maintainers" section.
  98
  99 2009-10-06  Michael Eager  <eager@eagercon.com>
 100
 101         * microblaze/interp.c: Add include microblaze-dis.h.
 102
 103 2009-09-23  Michael Eager  <eager@eagercon.com>
 104
 105         * configure: Add microblaze-*.* (not regenerated).
 106         * configure.ac: Likewise.
 107         * microblaze/config.in: New.
 108         * microblaze/configure: Generate.
 109         * microblaze/configure.ac: New.
 110         * microblaze/interp.c: New.
 111         * microblaze/Makefile.in: New.
 112         * microblaze/microblaze.h: New.
 113         * microblaze/microblaze.isa: New.
 114         * microblaze/sim-main.h: New.
 115         * microblaze/sysdep.h: New.
 116
 117 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 118
 119         * avr/config.in: Regenerate.
 120         * avr/configure: Likewise.
 121         * configure: Likewise.
 122         * cris/config.in: Likewise.
 123         * cris/configure: Likewise.
 124
 125         * configure.ac: m4_include toplevel config/override.m4.
 126         * configure: Regenerate.
 127         * avr/configure: Regenerate.
 128         * cris/configure: Regenerate.
 129
 130 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 131
 132         * Makefile.in (datarootdir): New variable.
 133
 134 2009-05-18  Jon Beniston <jon@beniston.com>
 135
 136         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 137         * configure.ac: Add lm32 target.
 138         * lm32: New directory.
 139
 140 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 141
 142         * MAINTAINERS: Orphan ppc.
 143
 144 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 145
 146         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 147         m32c_signal_to_target.  Change signal return values from SIGILL,
 148         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 149         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 150
 151 2009-04-30  Anthony Green  <green@moxielogic.com>
 152
 153         * MAINTAINERS: Add myself for the moxie port.
 154         * moxie: New directory.
 155         * configure.ac: Add entry for moxie.
 156         * configure: Regenerate.
 157
 158 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 159
 160         * avr: New directory.
 161         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 162         * avr/config.in: New file, generated by autoheader.
 163         * avr/configure: New file generated by autoconf.
 164         * configure.ac: Add avr.
 165         * configure: Regenerated.
 166
 167 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 168
 169         * Makefile.in: Add dummy install-pdf, html, and
 170         install-html targets.
 171
 172 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 173
 174         * cris/sim-if.c: Include errno.h.
 175         (cris_start_address, cris_program_offset): New variables.
 176         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 177         enums.
 178         (cris_options): New options --cris-program-offset and
 179         --cris-start-address.
 180         (cris_option_handler): Handle new options.
 181         (cris_program_offset_write, cris_set_section_offset_iterator)
 182         (cris_offset_sections, cris_offset_sections): New functions.
 183         (sim_load): Use cris_program_offset_write as function argument to
 184         cris_load_elf_file, not sim_write.
 185         (struct offsetinfo): New struct.
 186         (cris_handle_interpreter): Fix typo in comment.
 187         (sim_open): Call cris_offset_sections as soon as the bfd of the
 188         infile is available.  Gate bfd validity checks on abfd non-NULL.
 189         (sim_create_inferior): Let cris_start_address when != -1 override
 190         other start-address choices.
 191
 192 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 193
 194         * cris/traps.c (abort): Define to call sim_io_error.
 195         (create_map): Make -1 imply a non-fixed address, not 0.  All
 196         callers changed.  Only prefer the next higher unmapped address if
 197         the last mapped address is no less than 0x40000000.  Check that
 198         the address to be mapped is not already mapped.  Update head
 199         comment.
 200         (unmap_pages): Don't call abort when recursive call fails, just
 201         note and return an error if a page in the range couldn't be unmapped.
 202         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 203         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 204         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 205         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 206         don't abort on page not being mapped.  Handle non-anon filemap
 207         with length padded to pagesize.
 208
 209 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 210
 211         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 212         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 213         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 214         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 215         (TARGET_AT_CLKTCK): Remove redundant macros.
 216         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 217         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 218         callers.
 219         (sim_open): Also pass AT_SECURE.
 220
 221         * cris/sim-main.h (struct _sim_cpu): New member
 222         set_target_thread_data.
 223         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 224         * cris/crisv10f.c: Ditto.
 225         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 226         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 227         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 228         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 229         case.
 230
 231         * cris/traps.c (TARGET_SYS_exit_group): Define.
 232         (cris_break_13_handler): Handle it like the exit for the last
 233         thread.
 234
 235         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 236         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 237         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 238         2.6.27.  Set machine field to the BFD printable name of the
 239         machine.
 240
 241         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 242         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 243         TARGET_MAP_DENYWRITE.
 244
 245         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 246         (TARGET_X_OK, TARGET_F_OK): Define.
 247         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 248
 249         * cris/semcrisv32f-switch.c: Regenerate.
 250
 251 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 252
 253         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 254         just a short CRIS-specific notice.  Tweak the wording for a
 255         failing architecture test.
 256
 257         * cris/traps.c (TARGET_SYS_writev): New macro.
 258         (is_mapped_only, cris_dump_map): New functions.
 259         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 260         and prot combinations and a non-zero page-offset.  If
 261         TARGET_MAP_FIXED, unmap pages before mapping them.
 262         <case TARGET_SYS_mprotect>: When checking, allow any length
 263         argument.  Don't actually do anything.
 264         <case TARGET_SYS_writev>: New case.
 265
 266         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 267         * cris/sim-if.c: Include elf-bfd.h.
 268         (struct progbounds): New members end_loadmem, start_nonloadmem.
 269         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 270         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 271         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 272         static.  Update head comment.  Set new struct progbounds members.
 273         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 274         variables.
 275         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 276         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 277         functions.
 278         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 279         handling to use auxv_entries.  Improve error message and checking
 280         for invalid programs.  Use new variable abfd for the program
 281         instead of for each access reaching into sd to get it.
 282         (sim_create_inferior): If non-zero, use interp_start_addr instead
 283         of the program start address.
 284         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 285         stale comment.  Always specify little-endian.
 286
 287 2008-07-29  Nick Clifton  <nickc@redhat.com>
 288
 289         * common/genmloop.sh: Add new parameter: -shell to specify the
 290         command interpreter to use to run the input file.  This is
 291         necessary because otherwise SHELL is taken from the user's
 292         environment, and not from the makefile that invoked this script
 293         and the user might not be running an sh-like shell.
 294         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 295         * fr30/Makefile.in: Likewise.
 296         * frv/Makefile.in: Likewise.
 297         * i960/Makefile.in: Likewise.
 298         * iq2000/Makefile.in: Likewise.
 299         * m32r/Makefile.in: Likewise.
 300
 301         * frv/mloop.in: Add missing start of line comment marker.
 302
 303 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 304
 305         * cris/configure: Regenerate to track ../common/common.m4 changes.
 306         * cris/config.in: Ditto.
 307
 308 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 309             Daniel Jacobowitz  <dan@codesourcery.com>
 310             Joseph Myers  <joseph@codesourcery.com>
 311
 312         * cris/configure: Regenerate.
 313
 314 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 315
 316         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 317
 318 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 319
 320         * MAINTAINERS: Add myself as maintainer of cr16 port.
 321
 322 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 323
 324         Add simulator for National cr16 processor.
 325         * cr16: New directory.
 326         * configure.ac: Add entry for National cr16.
 327         * configure: Regenerate.
 328
 329 2008-02-05  DJ Delorie  <dj@redhat.com>
 330
 331         * configure.ac (v850): V850 now has a testsuite.
 332         * configure (v850): Likewise.
 333
 334 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 335
 336         Updated copyright notices for most files.
 337
 338 2007-12-19  DJ Delorie  <dj@redhat.com>
 339
 340         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 341         cut_point.
 342
 343 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 344
 345         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 346         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 347         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 348         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 349         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 350         cris/semcrisv32f-switch.c: Regenerate.
 351
 352 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 353
 354         Switch the license of all files explicitly copyright the FSF
 355         to GPLv3.
 356
 357 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 358
 359         * Makefile.in: Add dummy "pdf" target.
 360
 361 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 362
 363         * cris/traps.c (dump_statistics): Change format for cycle numbers
 364         to %llu and cast parameters to unsigned long long.
 365
 366 2007-02-16  Thiemo Seufer  <ths@mips.com>
 367
 368         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 369
 370 2007-01-28  Manuel Lauss  <slauss@resi.at>
 371
 372         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 373         (sh-*-*): Change to sh*-*-*.
 374         * configure: Regenerated.
 375
 376 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 377
 378         Updated copyright notices for most files.
 379
 380 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 381
 382         * Makefile.in (autoconf-common autoheader-common): Only run
 383         autoheader on subdirs with a file config.in.
 384
 385         * configure.ac (common): Make the default "yes" for all targets
 386         with sim subdirs.
 387         * configure: Regenerate.
 388
 389         * Makefile.in (autoconf-common autoheader-common): In documented
 390         usage, say SHELL=/bin/sh.
 391         (.PHONY): Add autoheader-common.
 392
 393         * MAINTAINERS: Add self as authorized committer for *.
 394
 395 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 396             Hans-Peter Nilsson  <hp@axis.com>
 397
 398         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 399         (cris_unknown_syscall_action): Declare.
 400         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 401         (cris_options): Add cris-unknown-syscall option.
 402         (cris_option_handler): Correct comment about and error message for
 403         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 404         * cris/traps.c: Include stdarg.h
 405         (cris_unknown_syscall): New function.
 406         (cris_break_13_handler): Instead of sim_io_eprintf and
 407         sim_engine_halt, call cris_unknown_syscall to handle more or less
 408         unknown syscalls.  Adjust code as necessary to handle return
 409         value.
 410
 411 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 412
 413         * MAINTAINERS: Add Dave Brolley for sh64.
 414
 415 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 416
 417         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 418         (cris_pipe_empty): Correct initialization of "remaining".  Only
 419         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 420         are written.
 421
 422 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 423
 424         * cris/configure.ac: Check for limits.h and sys/param.h.
 425         * cris/configure, cris/config.in: Rebuild.
 426         * cris/traps.c (SIM_PATHMAX): New macro.
 427         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 428
 429 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 430
 431         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 432         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 433         * configure: Regenerated.
 434
 435 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 436
 437         * cris/configure: Regenerated.
 438
 439 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 440
 441         * cris/configure: Regenerated.
 442
 443 2006-05-05  Andreas Schwab  <schwab@suse.de>
 444
 445         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 446         * configure: Regenerate.
 447
 448         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 449         (CC_FOR_BUILD): Don't override.
 450         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 451
 452 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 453
 454         * MAINTAINERS: Add an "Authorized committers" section, and list
 455         DJ Delorie for v850.
 456
 457 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 458
 459         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 460
 461 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 462
 463         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 464         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 465         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 466         (all): Depend on rvdummy$(EXEEXT).
 467         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 468         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 469         default off.
 470         * cris/configure: Regenerate.
 471         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 472         (enum cris_interrupt_type, crisv10deliver_interrupt)
 473         (crisv32deliver_interrupt: New declarations.
 474         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 475         sim_events_tickn and set state-events member work_pending when it's
 476         time for the next event.
 477         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 478         interrupt-delivery function.
 479         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 480         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 481         * cris/devices.c: Include hw-device.h.
 482         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 483         (device_io_write_buffer): Only perform 0x900000xx-functions if
 484         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 485         call hw_io_write_buffer.  Add return 0 last in function.
 486         * cris/sim-if.c (cris_have_900000xxif): Now global.
 487         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 488         Force "-model" option, effectively.
 489         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 490         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 491
 492 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 493
 494         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 495         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 496         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 497
 498 2006-03-13  DJ Delorie  <dj@redhat.com>
 499
 500         * MAINTAINERS: Add self as m32c sim maintainer.
 501
 502 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 503
 504         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 505         mapping.
 506         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 507
 508 2006-01-23  Jim Blandy  <jimb@redhat.com>
 509
 510         Add simulator for Renesas M32C and M16C.
 511
 512         * m32c: New directory.
 513         * configure.ac: Add entry for Renesas M32C.
 514         * configure: Regenerate.
 515
 516 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 517
 518         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 519         cycle count for the current insn.
 520
 521 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 522
 523         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 524         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 525         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 526         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 527
 528 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 529
 530         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 531         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 532         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 533         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 534         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 535         cris/semcrisv32f-switch.c: Regenerate.
 536
 537 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 538
 539         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 540         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 541         TARGET_O_WRONLY.
 542         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 543         F_GETFL on fd 0, 1 and 2.
 544
 545 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 546
 547         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 548         last_open_fd, last_open_flags.
 549         * cris/traps.c: Don't include targ-vals.h.
 550         (TARGET_O_ACCMODE): Define.
 551         (cris_break_13_handler): Set new _sim_cpu members.
 552         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 553         Rearrange code as switch.  Emit "unimplemented" abort for
 554         unimplemented fcntl calls.
 555
 556         * cris/traps.c (TARGET_SYS_stat): Define.
 557         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 558         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 559
 560 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 561
 562         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 563         low 32 bits are used after an unsigned long cast.
 564
 565 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 566
 567         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 568
 569 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 570
 571         * MAINTAINERS: Update my mail address, move myself to the
 572         "Past maintainers" section.
 573
 574 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 575
 576         * configure.ac: Add igen to v850 build.
 577         * configure: Regenerate.
 578
 579 2005-04-29  Paul Brook  <paul@codesourcery.com>
 580
 581         * common/callback.c (PIPE_BUF): Provide default definition.
 582         (os_lstat): Use stat if lstat is not available on the host.
 583         (os_ftruncate): Return EINVAL if not available on the host.
 584         (os_truncate): Ditto.
 585         * common/configure.ac: Check for lstat, truncate and ftruncate.
 586         * common/configure: Regenerate.
 587         * common/config.in: Regenerate.
 588
 589 2005-04-27  Paul Brook  <paul@codesourcery.com>
 590
 591         * common/Make-common.in: Add $(EXEEXT) to "run".
 592
 593 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 594
 595         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 596         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 597         implemented.  In call to create_map, pad length argument to 8k.
 598
 599 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 600
 601         * configure.ac: Add explicit sh64 case.
 602         * configure: Regenerate.
 603
 604 2005-03-30  Paul Brook  <paul@codesourcery.com>
 605
 606         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 607
 608 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 609
 610         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 611         include cgen-ops.h in decodev10.c and decodev32.c.
 612         * cris/sim-main.h: Don't include cgen-ops.h here.
 613         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 614         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 615         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 616         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 617         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 618         cris/semcrisv32f-switch.c: Regenerate.
 619
 620         * cris/traps.c (cris_break_13_handler) <case
 621         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 622         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 623
 624 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 625
 626         * cris/configure: Regenerate.
 627
 628 2005-02-28  Jim Blandy  <jimb@redhat.com>
 629
 630         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 631         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 632         Regenerated, after change to common/aclocal.m4.
 633
 634 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 635
 636         * iq2000: New target subdirectory.
 637         * configure.ac: Add iq2000 target.
 638         * configure: Regenerate.
 639
 640 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 641
 642         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 643         (realclean, install): Fail if subdir make failed.
 644
 645 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 646
 647         * cris: New directory, simulator for Axis Communications CRIS
 648         including CRIS v32, CGEN-based.
 649         * configure.ac: Add corresponding configury.
 650         * configure: Regenerate.
 651
 652 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 653
 654         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 655         common directory.  Remove sparc*-*-* from list.
 656
 657 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 658
 659         * Makefile.in (autoconf-common autoheader-common): Add --force to
 660         autoconf and autoheader.
 661         (autoconf-common autoheader-common)
 662         (autoconf-install autoheader-install): Check for configure.ac, not
 663         configure.in.
 664         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 665         * configure: Re-generate.
 666
 667 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 668
 669         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 670         correctly calls AC_CONFIG_SUBDIRS.
 671         * configure: Re-generate.
 672
 673 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 674
 675         * i960, h8500: Delete directory.
 676
 677 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 678
 679         * d30v, fr30, mn10200, z8k: Delete directory.
 680
 681 2004-03-10  Ben Elliston  <bje@gnu.org>
 682
 683         * MAINTAINERS: Update my mail address.
 684
 685 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 686
 687         * configure.in (mips*-*-*): Configure in testsuite.
 688         * configure: Regenerate.
 689
 690 2003-10-08  Dave Brolley  <brolley@redhat.com>
 691
 692         * configure.in: Move frv handling to alphabetically correct placement.
 693
 694 2003-09-03  Andreas Schwab  <schwab@suse.de>
 695
 696         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 697
 698 2003-08-29  Dave Brolley  <brolley@redhat.com>
 699
 700         * MAINTAINERS: Add myself as maintainer of the FRV port.
 701
 702 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 703             Dave Brolley  <brolley@redhat.com>
 704
 705         * frv/: New directory, simulator for the Fujitsu FRV.
 706         * configure.in: Add frv configury.
 707         * configure: Regenerate.
 708
 709 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 710
 711         * MAINTAINERS: Update my mail address.
 712
 713 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 714
 715         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 716         maintenance.  List igen and sh maintainers.  Mention that target
 717         and global maintainers pick up the slack.
 718
 719 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 720
 721         * configure.in: Add testsuite to extra_subdirs for sh.
 722         * configure: Regenerate.
 723
 724 2003-01-23  Nick Clifton  <nickc@redhat.com>
 725
 726         * Add sh2e support:
 727
 728 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 729
 730         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 731
 732 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 733
 734         * MAINTAINERS: Update my email address.
 735
 736 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 737
 738         * w65/: Delete directory.
 739
 740 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 741
 742         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 743         * configure: Re-generate.
 744
 745 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 746
 747         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 748         * configure: Re-generate.
 749
 750 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 751
 752         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 753         id, date and host to be overriden by NAME, ID, DATE and HOST
 754         respectfully.  Use ISO dates.
 755
 756 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 757
 758         * Makefile.in (ChangeLog): New makefile variable.
 759         * README-HACKING: Mention the ChangeLog makefile variable.
 760
 761 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 762
 763         * tic80/: Delete directory.
 764
 765 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 766
 767         * MAINTAINERS: Update my email address.
 768
 769 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 770
 771         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 772
 773 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 774
 775         * MAINTAINERS: Record self as a co-maintainer of just common/.
 776
 777 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 778
 779         * MAINTAINERS: Point to GDB files describing overall maintaince
 780         and check-in procedures.
 781
 782 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 783
 784         * MAINTAINERS: Add myself for ARM portions.
 785
 786 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 787
 788         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 789         * configure: Re-generate.
 790
 791 2001-02-16  Ben Elliston  <bje@redhat.com>
 792
 793         * MAINTAINERS: Add myself for common portions.
 794
 795 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 796
 797         * MAINTAINERS: Added self and Andrew for the mips sim.
 798
 799 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 800
 801         * MAINTAINERS: Added self and Andrew for the ppc sim.
 802
 803 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 804
 805         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 806         * m68hc11: New directory.
 807         * configure.in: Add.
 808         * configure: Regenerate.
 809
 810 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 811
 812         * tic80: New directory.
 813         * configure.in: Add configury.
 814         * configure: Regenerate.
 815
 816 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 817
 818         * configure.in (extra_subdirs): Add testsuite to strongarm
 819         directories.
 820         * configure: Regenerate.
 821
 822 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 823
 824         * MAINTAINERS: New file.  Blank.
 825
 826 1999-11-18  Ben Elliston  <bje@cygnus.com>
 827
 828         * configure.in: Require autoconf 2.13 and remove obsolete
 829         invocation of AC_C_CROSS.
 830         * configure: Regenerate.
 831
 832 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 833
 834         * configure.in: Configure the testsuite directory for thumb.
 835         * configure: Regenerate.
 836
 837 1999-07-16  Ben Elliston  <bje@cygnus.com>
 838
 839         * configure.in: Configure the testsuite directory for arm.
 840         * configure: Regenerate.
 841
 842 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 843
 844         * configure.in: Add support for MCore target.
 845         * configure: Regenerate.
 846
 847 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 848
 849         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 850         RUNTEST instead of commenting out, fixes portability problem.
 851
 852 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 853
 854         * configure.in: Add support for StrongARM target.
 855         * configure: Regenerate.
 856
 857 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 858
 859         * configure.in: Require autoconf 2.12.1 or higher.
 860
 861 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 862
 863         * configure.in (i960-*-*): Add.
 864         * configure: Rebuild.
 865
 866 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 867
 868         * configure.in: Added case for fr30-*-*.
 869         * configure: Regenerated.
 870
 871 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 872
 873         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 874         to allow successful operation on Windows.
 875
 876 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 877
 878         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 879         check can be invoked recursively.
 880
 881 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 882
 883         * configure.in: Build simulator on sparclite and sparc86x targets.
 884         * configure: Regenerate.
 885
 886 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 887
 888         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 889         to autoconf and autoheader.
 890
 891 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 892
 893         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 894         ../common' to autoconf and autoheader.  Unconditionally run
 895         autoconf in every subdir.
 896         (autoconf-changelog autoheader-changelog): Unconditionally run
 897         commands in every subdir.
 898         (autoconf-install autoheader-install): Likewise.
 899
 900 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 901
 902         * Makefile.in:  Get SHELL from configure.
 903         * (FLAGS_TO_PASS):  Pass down SHELL.
 904         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 905         NT native builds.
 906
 907 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 908
 909         * configure.in (extra_subdirs): Enable igen for mn10300.
 910         * configure: Re-generate.
 911
 912 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 913
 914         * configure.in (extra_subdirs): Add support for thumb target.
 915
 916         * configure (extra_subdirs): Add support for thumb target.
 917
 918 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 919
 920         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 921         target.
 922         * configure: Regenerate.
 923
 924 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 925
 926         * configure.in (extra_subdirs): v850ea needs igen.
 927         * configure: Re-generate.
 928
 929 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 930
 931         * configure.in (testdir): When a testsuite directory, add that to
 932         the list of confdirs.
 933
 934 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 935
 936         * configure.in (extra_subdirs): Enable igen ready for V850.
 937
 938 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 939
 940         * configure.in (w65-*-*, only_if_enabled): Set.
 941         * configure: Re-generate.
 942
 943 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 944
 945         * configure.in (sparc*-*-*, only_if_enabled): Set
 946         only_if_enabled=yes.  Check only_if_enabled before enabling a
 947         simulator.
 948         * configure: Regenerate.
 949
 950 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 951
 952         * configure.in (extra_subdirs): Add v850e target.
 953
 954 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 955
 956         * configure.in (extra_subdirs): Add v850ea target.
 957
 958 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 959
 960         * configure.in (sparc*-*-*): Don't build erc32.
 961         * configure: Regenerate.
 962
 963 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 964
 965         * configure.in (m32r-*-*): New target.
 966         * configure: Regenerate.
 967
 968         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 969
 970 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 971
 972         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 973         thought that .NOEXPORT was the default target.
 974
 975 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 976
 977         * Makefile.in (clean mostlyclean): Restore targets accidentally
 978         deleted in earlier change.
 979
 980 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 981
 982         * Makefile.in (autoheader-common, autoheader-changelog,
 983         autoheader-install): Perform autoheader in addition to autoconf.
 984
 985 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
 986
 987         * Makefile.in (autoconf-install): New target.
 988         (autoconf-changelog): Try different way to obtain user name.
 989
 990 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 991
 992         * Makefile.in (autoconf-changelog): New target, update
 993         ChangeLog for all subdirectories - normally used after
 994         autoconf-common target.
 995
 996 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 997
 998         * configure.in (extra_subdirs): Include testsuite for d30v.
 999         * configure: Regenerate.
1000
1001         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1002         ../gdb/Makefile.in
1003         (check): New rules - drive the testsuite.
1004
1005 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1006
1007         * configure.in: Add mn10200 configure lines accidentally
1008         removed.
1009         * configure: Regenerated.
1010
1011 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1012
1013         * configure.in (extra_subdirs): Generalize common sub directory
1014         into a list.
1015         (extra_subdirs): For d30v add igen to the list to be built.
1016
1017 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1018
1019         * configure.in (d30v): New target.
1020         * configure: Regenerated.
1021
1022 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1023
1024         * configure.in: Don't require GCC to build the mn10200
1025         simulator anymore.
1026         * configure: Rebuilt.
1027
1028 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1029
1030         * configure.in: Don't configure any subdirs if no simulator
1031         is being built.  Don't use erc32 for sparc64.
1032         * configure: Regenerated.
1033
1034 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1035
1036         * Makefile.in (autoconf-common): New target.
1037         * configure.in: Do configure common.
1038         * configure: Regenerated.
1039
1040 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1041
1042         * configure configure.in:  Don't configure common anymore.  Files
1043         from common are now built in the individual simualtor directories.
1044         This fixes problems with the WinGDB build procedure.
1045
1046 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1047
1048         * configure: Enable the mn10200 simulator.
1049
1050 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1051
1052         * configure.in (configdirs): Add common.
1053         * configure: Regenerated.
1054
1055 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1056
1057         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1058         system V based targets.
1059         * configure: Regenerate.
1060
1061 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1062
1063         * configure.in (--enable-sim-powerpc): Delete.
1064         (--enable-sim): Add.
1065         * configure: Regenerated.
1066
1067 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1068
1069         * configure.in: Only build the V850 simulator if
1070         we are using gcc.
1071         * configure: Rebuild.
1072
1073 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1074
1075         * configure.in: Do build erc32 for DOS and Windows hosts.
1076         * configure: Rebuild.
1077
1078 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1079
1080         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1081         be inherited from the parent.  Remove INSTALL_XFORM and
1082         INSTALL_XFORM1.  Make INSTALL be set from configure.
1083
1084 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1085
1086         * configure.in: Only build the MIPS simulator if we are using
1087         gcc.
1088         * configure: Rebuild.
1089
1090 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1091
1092         * configure.in (v850-*-*): Added V850 simulator.
1093
1094 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1095
1096         * configure.in (d10v-*-*): Added D10V simulator.
1097
1098 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1099
1100         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1101         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1102         (docdir): Removed.
1103         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1104         (AC_PROG_INSTALL): Added.
1105         * configure: Rebuilt.
1106
1107 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1108
1109         * configure.in: Only configure erc32 if using gcc.
1110         * configure: Rebuild.
1111
1112 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1113
1114         * configure.in (sim_target): Build PowerPC simulator for powerpc
1115         System V.4, Solaris, and Elf targets.
1116         * configure: Regenerate with autoconf 2.10.
1117
1118 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1119
1120         * configure.in: Only built erc32 simulator on Unix hosts as it
1121         uses pseudo ttys.
1122         * configure: Regenerated with autoconf 2.8.
1123
1124 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1125
1126         * erc32: Sparc simulator from the ESA.
1127
1128 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1129
1130         From: Miles Bader  <miles@gnu.ai.mit.edu>
1131         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1132         * configure: Regenerate using autoconf.
1133
1134 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1135
1136         * Makefile.in (install): Fix typo.
1137
1138 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1139
1140         * configure: Regenerate with autoconf 2.7.
1141
1142         * Makefile.in (all): Simplify.
1143         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1144         as in the all target.
1145         (distclean, maintainer-clean, realclean): Likewise.
1146         (install): Likewise.
1147
1148 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1149
1150         * Makefile.in (all): Remove extra '\' char from shell script.
1151
1152 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1153
1154         * Makefile.in (all): Avoid a for loop with zero elements, even if
1155         the loop will not be executed because of an if statement.
1156
1157 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1158
1159         * Makefile.in (install): Add missing semicolon in "fi \".
1160
1161 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1162
1163         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1164         defaults from configure.
1165
1166         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1167         configure defaults.
1168         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1169         if either --enable-sim-powerpc is used, or the host compiler is
1170         GCC.
1171
1172 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1173
1174         * configure.in (mips*-*-*): Added "mips" simulator target.
1175         * configure: Re-generated.
1176
1177 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1178
1179         * Makefile.in (BISON): Remove macro.
1180         (FLAGS_TO_PASS): Remove BISON.
1181
1182 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1183
1184         * configure.in:  Explicitly `exit 0' for broken shells.
1185         * configure:  Rebuilt.
1186
1187 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1188
1189         * common/run.c (main): Initialize the callbacks.
1190
1191 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1192
1193         * Makefile.in (maintainer-clean): New synonym for realclean.
1194
1195 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1196
1197         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1198         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1199
1200 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1201
1202         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1203         <cagney@highland.com.au>.
1204         * configure: Regnerate from configure.in.
1205
1206 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1207
1208         * Update all FSF addresses except those in COPYING* files.
1209
1210 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1211
1212         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1213         submakes either default or passed in value.
1214
1215 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1216
1217         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1218           install): Changed targets so that they descend all
1219           subdirectories in $(SUBDIRS).
1220           (*-all, *-clean, *-install): Removed targets.
1221
1222         * configure.in: Don't bother with target makefile fragments, they
1223           are no longer needed.
1224         * configure: regenerated.
1225
1226         * Makefile.in, configure.in: converted to autoconf.
1227         * configure: New file, generated with autconf 2.4.
1228
1229 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1230
1231         * Makefile.in: Support ARM.
1232         * configure.in: Ditto.
1233
1234 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1235
1236         * Makefile.in: Support W65.
1237         * configure.in: Ditto.
1238
1239 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1240
1241         * Makefile.in: Add TAGS target.
1242
1243 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1244
1245         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1246           install-h8300, clean-h8300, all-h8500, install-h8500,
1247           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1248           recursion lines.
1249
1250 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1251
1252         * Makefile.in: remove endian.h trace from h8500
1253
1254 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1255
1256         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1257
1258 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1259
1260         * Makefile.in: make all of the all-* target (except all-nothing)
1261         depend on endian.h, so that if we're not building a simulator, we
1262         don't built endian
1263
1264 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1265
1266         * Makefile.in (check, installcheck): Added dummy targets.
1267
1268 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1269
1270         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1271         explicitly make it, since some makes apparently don't work with
1272         VPATH and .c to executable rules (SunOS make for example).
1273
1274 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1275
1276         * Makefile.in (endian): Add explicit rule for broken makes.
1277
1278 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1279
1280         * Makefile.in (info, install-info): New targets.
1281         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1282         level Makefile.
1283
1284 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1285
1286         * Makefile.in (endian.h): build endian.h via a temporary file so
1287           that we don't leave an incomplete file lying around on
1288           interrupted builds.
1289           (clean): remove endian, e.h, and endian.h.
1290
1291 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1292
1293         * Makefile.in, configure.in: if target isn't supported, build a
1294         harmless makefile.
1295
1296