sim/ChangeLog

   1 2019-02-28  Joel Brobecker  <brobecker@adacore.com>
   2
   3         * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
   4
   5 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
   6
   7         * MAINTAINERS: Add Andrew Burgess as global maintainer.
   8
   9 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
  10
  11         * sim-base.h: Add 'extern C' if header is compiled with C++.
  12
  13 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
  14
  15         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
  16         cgen source tree.
  17         * cris/configure: Regenerate.
  18         * frv/configure: Regenerate.
  19         * iq2000/configure: Regenerate.
  20         * lm32/configure: Regenerate.
  21         * m32r/configure: Regenerate.
  22         * or1k/configure: Regenerate.
  23         * sh64/configure: Regenerate.
  24
  25 2018-10-05  Stafford Horne  <shorne@gmail.com>
  26
  27         * or1k/cpu.h: Regenerate.
  28         * or1k/decode.c: Regenerate.
  29         * or1k/decode.h: Regenerate.
  30         * or1k/model.c: Regenerate.
  31         * or1k/sem-switch.c: Regenerate.
  32         * or1k/sem.c: Regenerate:
  33
  34 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  35
  36         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  37         ISA maintenance.
  38
  39 2018-07-19  DJ Delorie  <dj@redhat.com>
  40
  41         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  42
  43 2018-07-14  Stafford Horne  <shorne@gmail.com>
  44
  45         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  46
  47 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  48
  49         * All configure.ac: Remove AC_PREREQ.
  50         * All configure: Re-generate.
  51
  52 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  53
  54         * MAINTAINERS: Update my company e-mail address.
  55
  56 2017-12-12  Stafford Horne  <shorne@gmail.com>
  57             Peter Gavin  <pgavin@gmail.com>
  58
  59         * configure: Regenerated.
  60         * or1k/aclocal.m4: Generated.
  61         * or1k/config.in: Generated.
  62         * or1k/configure: Generated.
  63
  64 2017-12-12  Stafford Horne  <shorne@gmail.com>
  65             Peter Gavin  <pgavin@gmail.com>
  66
  67         * or1k/arch.c: Generated.
  68         * or1k/arch.h: Generated.
  69         * or1k/cpu.c: Generated.
  70         * or1k/cpu.h: Generated.
  71         * or1k/cpuall.h: Generated.
  72         * or1k/decode.c: Generated.
  73         * or1k/decode.h: Generated.
  74         * or1k/model.c: Generated.
  75         * or1k/sem-switch.c: Generated.
  76         * or1k/sem.c: Generated.
  77
  78 2017-12-12  Stafford Horne  <shorne@gmail.com>
  79             Peter Gavin  <pgavin@gmail.com>
  80
  81         * configure.tgt: Add or1k sim.
  82         * or1k/README: New file.
  83         * or1k/Makefile.in: New file.
  84         * or1k/configure.ac: New file.
  85         * or1k/mloop.in: New file.
  86         * or1k/or1k-sim.h: New file.
  87         * or1k/or1k.c: New file.
  88         * or1k/sim-if.c: New file.
  89         * or1k/sim-main.h: New file.
  90         * or1k/traps.c: New file.
  91
  92 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
  93
  94         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
  95
  96 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  97
  98         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
  99
 100 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 101
 102         * MAINTAINERS (ft32): Add myself.
 103
 104 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 105
 106         * MAINTAINERS (aarch64): Update my email address.
 107
 108 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 109
 110         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 111         * configure: Regenerate.
 112
 113 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 114
 115         * MAINTAINTERS (aarch64): Add myself.
 116
 117 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 118
 119         * MAINTAINERS (Maintainers for particular sims): Add myself as
 120         a MIPS maintainer.
 121
 122 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 123
 124         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 125
 126 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 127
 128         * configure.ac: Delete sim_common check and the
 129         AC_CONFIG_SUBDIRS(common) call.
 130         * configure: Regenerate.
 131         * configure.tgt (sim_common): Delete the variable.
 132
 133 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 134
 135         * .gitignore: Delete /common/cconfig.h entry.
 136
 137 2016-01-05  Nick Clifton  <nickc@redhat.com>
 138
 139         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 140
 141 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 142
 143         * aarch64/simulator.c: Remove syscall.h include.
 144
 145 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 146
 147         * README-HACKING: Delete mention of tconfig.h.
 148
 149 2015-11-24  Nick Clifton  <nickc@redhat.com>
 150
 151         * configure.tgt: Add aarch64 entry.
 152         * configure: Regenerate.
 153
 154 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 155
 156         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 157         * configure: Regenerate.
 158
 159 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 160
 161         * README-HACKING: Change configure.in to configure.ac.
 162
 163 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 164
 165         * arm/configure: Regenerated.
 166         * avr/configure: Likewise.
 167         * bfin/configure: Likewise.
 168         * common/configure: Likewise.
 169         * cr16/configure: Likewise.
 170         * cris/configure: Likewise.
 171         * d10v/configure: Likewise.
 172         * erc32/configure: Likewise.
 173         * frv/configure: Likewise.
 174         * ft32/configure: Likewise.
 175         * h8300/configure: Likewise.
 176         * igen/configure: Likewise.
 177         * iq2000/configure: Likewise.
 178         * lm32/configure: Likewise.
 179         * m32c/configure: Likewise.
 180         * m32r/configure: Likewise.
 181         * m68hc11/configure: Likewise.
 182         * mcore/configure: Likewise.
 183         * microblaze/configure: Likewise.
 184         * mips/configure: Likewise.
 185         * mn10300/configure: Likewise.
 186         * moxie/configure: Likewise.
 187         * msp430/configure: Likewise.
 188         * ppc/configure: Likewise.
 189         * rl78/configure: Likewise.
 190         * rx/configure: Likewise.
 191         * sh/configure: Likewise.
 192         * sh64/configure: Likewise.
 193         * v850/configure: Likewise.
 194
 195 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 196
 197         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 198         (BFD_LIB): Remove $(ZLIB).
 199         (CONFIG_LIBS): Add $(ZLIB).
 200         * ppc/Makefile.in (ZLIBINC): Removed.
 201         (INCLUDES): Remove $(ZLIBINC).
 202         (BFD_LIB): Remove $(ZLIB).
 203
 204 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 205
 206         * arm/configure: Regenerated.
 207         * avr/configure: Likewise.
 208         * bfin/configure: Likewise.
 209         * common/configure: Likewise.
 210         * cr16/configure: Likewise.
 211         * cris/configure: Likewise.
 212         * d10v/configure: Likewise.
 213         * erc32/configure: Likewise.
 214         * frv/configure: Likewise.
 215         * ft32/configure: Likewise.
 216         * h8300/configure: Likewise.
 217         * igen/configure: Likewise.
 218         * iq2000/configure: Likewise.
 219         * lm32/configure: Likewise.
 220         * m32c/configure: Likewise.
 221         * m32r/configure: Likewise.
 222         * m68hc11/configure: Likewise.
 223         * mcore/configure: Likewise.
 224         * microblaze/configure: Likewise.
 225         * mips/configure: Likewise.
 226         * mn10300/configure: Likewise.
 227         * moxie/configure: Likewise.
 228         * msp430/configure: Likewise.
 229         * ppc/configure: Likewise.
 230         * rl78/configure: Likewise.
 231         * rx/configure: Likewise.
 232         * sh/configure: Likewise.
 233         * sh64/configure: Likewise.
 234         * v850/configure: Likewise.
 235
 236 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 237
 238         * configure: Regenerate.
 239         * configure.ac: Delete sim_testsuite check and config in testsuite.
 240         * configure.tgt (sim_testsuite): Delete everywhere.
 241
 242 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 243
 244         * configure: Regenerate.
 245         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 246
 247 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 248
 249         * configure.tgt: Add FT32 entry.
 250         * configure: Regenerate.
 251
 252 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 253
 254         * .gitignore: Delete tconfig.h.
 255         * README-HACKING: Change tconfig.in to tconfig.h.
 256
 257 2014-03-12  Nick Clifton  <nickc@redhat.com>
 258
 259         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 260
 261 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 262
 263         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 264         * configure: Regenerate.
 265
 266 2014-01-06  Tom Tromey  <tromey@redhat.com>
 267
 268         * common/cgen-trace.c: Don't use old VA_* macros.
 269         * common/sim-load.c (xprintf): Likewise.
 270         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 271
 272 2014-01-06  Tom Tromey  <tromey@redhat.com>
 273
 274         * README-HACKING: Don't use PARAMS.
 275         * arm/wrapper.c: Don't use PARAMS.
 276         * bfin/sim-main.h: Don't use PARAMS.
 277         * common/callback.c: Don't use PARAMS.
 278         * common/cgen-trace.c: Don't use PARAMS.
 279         * common/run-sim.h: Don't use PARAMS.
 280         * common/run.c: Don't use PARAMS.
 281         * common/sim-base.h: Don't use PARAMS.
 282         * common/sim-load.c: Don't use PARAMS.
 283         * common/sim-options.h: Don't use PARAMS.
 284         * common/sim-trace.c: Don't use PARAMS.
 285         * common/sim-trace.h: Don't use PARAMS.
 286         * common/sim-utils.h: Don't use PARAMS.
 287         * cr16/cr16_sim.h: Don't use PARAMS.
 288         * cr16/gencode.c: Don't use PARAMS.
 289         * cr16/interp.c: Don't use PARAMS.
 290         * cr16/simops.c: Don't use PARAMS.
 291         * d10v/d10v_sim.h: Don't use PARAMS.
 292         * d10v/gencode.c: Don't use PARAMS.
 293         * d10v/interp.c: Don't use PARAMS.
 294         * d10v/simops.c: Don't use PARAMS.
 295         * erc32/erc32.c: Don't use PARAMS.
 296         * erc32/exec.c: Don't use PARAMS.
 297         * erc32/float.c: Don't use PARAMS.
 298         * erc32/func.c: Don't use PARAMS.
 299         * erc32/sis.c: Don't use PARAMS.
 300         * erc32/sis.h: Don't use PARAMS.
 301         * mips/interp.c: Don't use PARAMS.
 302         * mips/sim-main.h: Don't use PARAMS.
 303         * sh/interp.c: Don't use PARAMS.
 304         * v850/sim-main.h: Don't use PARAMS.
 305         * v850/v850_sim.h: Don't use PARAMS.
 306
 307 2013-11-07  Will Newton  <will.newton@linaro.org>
 308
 309         PR gdb/15508
 310         * arm/wrapper.c (sim_create_inferior): Call init before
 311         accessing STATE.
 312
 313 2013-11-07  Will Newton  <will.newton@linaro.org>
 314
 315         PR gdb/8989
 316         * arm/wrapper.c (sim_create_inferior): Avoid calling
 317         bfd_get_mach with a NULL bfd.
 318
 319 2013-06-21  Nick Clifton  <nickc@redhat.com>
 320
 321         * msp430: New Directory.
 322         * configure.tgt: Add it.
 323         * configure: Regenerate.
 324
 325 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 326
 327         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 328         * avr/interp.c (sim_complete_command): Ditto.
 329         * common/sim-options.c (sim_complete_command): Ditto.
 330         * cr16/interp.c (sim_complete_command): Ditto.
 331         * erc32/interf.c (sim_complete_command): Ditto.
 332         * m32c/gdb-if.c (sim_complete_command): Ditto.
 333         * microblaze/interp.c (sim_complete_command): Ditto.
 334         * ppc/sim_calls.c (sim_complete_command): Ditto.
 335         * rl78/gdb-if.c (sim_complete_command): Ditto.
 336         * rx/gdb-if.c (sim_complete_command): Ditto.
 337         * sh/interp.c (sim_complete_command): Ditto.
 338
 339 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 340
 341         Update year range in copyright notice of all files.
 342
 343 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 344
 345         Update old contact info in GPL license notices.
 346
 347 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 348
 349         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 350
 351 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 352
 353         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 354         condition.
 355         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 356         * arm/configure: Regenerate.
 357         * avr/configure: Regenerate.
 358         * bfin/configure: Regenerate.
 359         * common/configure: Regenerate.
 360         * cr16/configure: Regenerate.
 361         * cris/configure: Regenerate.
 362         * d10v/configure: Regenerate.
 363         * erc32/configure: Regenerate.
 364         * frv/configure: Regenerate.
 365         * h8300/configure: Regenerate.
 366         * igen/configure: Regenerate.
 367         * iq2000/configure: Regenerate.
 368         * lm32/configure: Regenerate.
 369         * m32c/configure: Regenerate.
 370         * m32r/configure: Regenerate.
 371         * m68hc11/configure: Regenerate.
 372         * mcore/configure: Regenerate.
 373         * microblaze/configure: Regenerate.
 374         * mips/configure: Regenerate.
 375         * mn10300/configure: Regenerate.
 376         * moxie/configure: Regenerate.
 377         * ppc/configure: Regenerate.
 378         * rl78/configure: Regenerate.
 379         * rx/configure: Regenerate.
 380         * sh/configure: Regenerate.
 381         * sh64/configure: Regenerate.
 382         * testsuite/configure: Regenerate.
 383         * v850/configure: Regenerate.
 384
 385 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 386
 387         * MAINTAINERS: Update my email address.
 388
 389 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 390
 391         * mips/basic.exp: Add mips*-mti-elf* target.
 392         * configure.ac: Add mips*-mti-elf* target.
 393         * configure: Regenerate.
 394
 395 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 396
 397         * configure: Regenerate.
 398
 399 2012-06-06  Michael Eager  <eager@eagercon.com>
 400
 401         * microblaze/interp.c (config.h): Add #include.
 402
 403 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 404
 405         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 406         Frysinger.
 407
 408 2011-11-28  DJ Delorie  <dj@redhat.com>
 409
 410         * configure.tgt: Add rl78 support.
 411         * configure: Regenerate.
 412         * rl78: New directory.
 413         * MAINTAINERS: Add myself as RL78 maintainer.
 414
 415 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 416
 417         * MAINTAINERS: Remove Thiemo Seufer.
 418
 419 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 420
 421         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 422         * configure: Regenerate.
 423
 424 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 425
 426         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 427         handle targets.
 428         * configure: Regenerate.
 429
 430 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 431
 432         * MAINTAINERS: Add bfin entry.
 433         * configure.tgt (bfin-*-*): Handle bfin targets.
 434         * configure: Regenerate.
 435
 436 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 437
 438         * .gitignore: Add /*/hw-config.h.
 439
 440 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 441
 442         * .gitignore: New file.
 443
 444 2010-07-28  DJ Delorie  <dj@redhat.com>
 445
 446         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 447
 448 2010-06-08  Nick Clifton  <nickc@redhat.com>
 449
 450         * reg.c (set_oszc): Use unsigned int for the mask.
 451         (set_szc, set_osz, set_sz): Likewise.
 452
 453 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 454
 455         * configure.ac: Target logic moved out to and included from ...
 456         * configure.tgt: ... this new file.
 457         * configure: Regenerated.
 458
 459 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 460
 461         * README-HACKING: Add more sections.
 462
 463 2010-02-11  Doug Evans  <dje@sebabeach.org>
 464
 465         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 466         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 467         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 468         * cris/semcrisv32f-switch.c: Regenerate.
 469
 470 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 471
 472         * avr/configure: Regenerate.
 473         * cris/configure: Regenerate.
 474         * microblaze/configure: Regenerate.
 475
 476 2010-01-02  Doug Evans  <dje@sebabeach.org>
 477
 478         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 479         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 480         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 481         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 482         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 483         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 484
 485 2010-01-01  Doug Evans  <dje@sebabeach.org>
 486
 487         * cris/mloop.in: Fix copyright year update snafu.
 488
 489 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 490
 491         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 492         * common/common.m4: Use AM_ZLIB to check for zlib support.
 493         * ppc/configure.ac: Likewise.
 494         * arm/configure, avr/configure, common/configure, cr16/configure,
 495         cris/configure, d10v/configure, erc32/configure, frv/configure,
 496         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 497         m32r/configure, m68hc11/configure, mcore/configure,
 498         microblaze/configure, mips/configure, mn10300/configure,
 499         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 500         v850/configure: Regenerate.
 501
 502 2009-11-24  DJ Delorie  <dj@redhat.com>
 503
 504         * rx: New directory.
 505         * configure.ac: Add entry for Renesas RX.
 506         * configure: Regenerate.
 507
 508 2009-11-22  Doug Evans  <dje@sebabeach.org>
 509
 510         * cris/cpuall.h: Regenerate.
 511         * cris/cpuv10.h: Regenerate.
 512         * cris/cpuv32.h: Regenerate.
 513         * cris/decodev10.c: Regenerate.
 514         * cris/decodev10.h: Regenerate.
 515         * cris/decodev32.c: Regenerate.
 516         * cris/decodev32.h: Regenerate.
 517
 518 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 519
 520         * avr/interp.c (sim_write): Allow byte access.
 521         (sim_read): Ditto.
 522
 523 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 524
 525         * avr/interp.c (sim_load): Clear memory before loading.
 526
 527 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 528
 529         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 530
 531 2009-10-23  Doug Evans  <dje@sebabeach.org>
 532
 533         * cris/arch.c: Regenerate.
 534         * cris/arch.h: Regenerate.
 535         * cris/cpuall.h: Regenerate.
 536         * cris/cpuv10.c: Regenerate.
 537         * cris/cpuv10.h: Regenerate.
 538         * cris/cpuv32.c: Regenerate.
 539         * cris/cpuv32.h: Regenerate.
 540         * cris/cris-desc.c: Regenerate.
 541         * cris/cris-desc.h: Regenerate.
 542         * cris/cris-opc.h: Regenerate.
 543         * cris/decodev10.c: Regenerate.
 544         * cris/decodev10.h: Regenerate.
 545         * cris/decodev32.c: Regenerate.
 546         * cris/decodev32.h: Regenerate.
 547         * cris/modelv10.c: Regenerate.
 548         * cris/modelv32.c: Regenerate.
 549         * cris/semcrisv10f-switch.c: Regenerate.
 550         * cris/semcrisv32f-switch.c: Regenerate.
 551
 552 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 553
 554         * avr/interp.c (sim_stop): Return 1.
 555
 556 2009-10-16  Doug Evans  <dje@sebabeach.org>
 557
 558         * MAINTAINERS: Add myself as m32r maintainer.
 559
 560 2009-10-15  Michael Egaer  <eager@eagercon.com>
 561
 562         * MAINTAINERS: Add self as MicroBlaze maintainer.
 563
 564 2009-10-14  Ben Elliston  <bje@gnu.org>
 565
 566         * MAINTAINERS (common): Move myself to "past maintainers" section.
 567
 568 2009-10-06  Michael Eager  <eager@eagercon.com>
 569
 570         * microblaze/interp.c: Add include microblaze-dis.h.
 571
 572 2009-09-23  Michael Eager  <eager@eagercon.com>
 573
 574         * configure: Add microblaze-*.* (not regenerated).
 575         * configure.ac: Likewise.
 576         * microblaze/config.in: New.
 577         * microblaze/configure: Generate.
 578         * microblaze/configure.ac: New.
 579         * microblaze/interp.c: New.
 580         * microblaze/Makefile.in: New.
 581         * microblaze/microblaze.h: New.
 582         * microblaze/microblaze.isa: New.
 583         * microblaze/sim-main.h: New.
 584         * microblaze/sysdep.h: New.
 585
 586 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 587
 588         * avr/config.in: Regenerate.
 589         * avr/configure: Likewise.
 590         * configure: Likewise.
 591         * cris/config.in: Likewise.
 592         * cris/configure: Likewise.
 593
 594         * configure.ac: m4_include toplevel config/override.m4.
 595         * configure: Regenerate.
 596         * avr/configure: Regenerate.
 597         * cris/configure: Regenerate.
 598
 599 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 600
 601         * Makefile.in (datarootdir): New variable.
 602
 603 2009-05-18  Jon Beniston <jon@beniston.com>
 604
 605         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 606         * configure.ac: Add lm32 target.
 607         * lm32: New directory.
 608
 609 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 610
 611         * MAINTAINERS: Orphan ppc.
 612
 613 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 614
 615         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 616         m32c_signal_to_target.  Change signal return values from SIGILL,
 617         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 618         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 619
 620 2009-04-30  Anthony Green  <green@moxielogic.com>
 621
 622         * MAINTAINERS: Add myself for the moxie port.
 623         * moxie: New directory.
 624         * configure.ac: Add entry for moxie.
 625         * configure: Regenerate.
 626
 627 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 628
 629         * avr: New directory.
 630         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 631         * avr/config.in: New file, generated by autoheader.
 632         * avr/configure: New file generated by autoconf.
 633         * configure.ac: Add avr.
 634         * configure: Regenerated.
 635
 636 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 637
 638         * Makefile.in: Add dummy install-pdf, html, and
 639         install-html targets.
 640
 641 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 642
 643         * cris/sim-if.c: Include errno.h.
 644         (cris_start_address, cris_program_offset): New variables.
 645         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 646         enums.
 647         (cris_options): New options --cris-program-offset and
 648         --cris-start-address.
 649         (cris_option_handler): Handle new options.
 650         (cris_program_offset_write, cris_set_section_offset_iterator)
 651         (cris_offset_sections, cris_offset_sections): New functions.
 652         (sim_load): Use cris_program_offset_write as function argument to
 653         cris_load_elf_file, not sim_write.
 654         (struct offsetinfo): New struct.
 655         (cris_handle_interpreter): Fix typo in comment.
 656         (sim_open): Call cris_offset_sections as soon as the bfd of the
 657         infile is available.  Gate bfd validity checks on abfd non-NULL.
 658         (sim_create_inferior): Let cris_start_address when != -1 override
 659         other start-address choices.
 660
 661 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 662
 663         * cris/traps.c (abort): Define to call sim_io_error.
 664         (create_map): Make -1 imply a non-fixed address, not 0.  All
 665         callers changed.  Only prefer the next higher unmapped address if
 666         the last mapped address is no less than 0x40000000.  Check that
 667         the address to be mapped is not already mapped.  Update head
 668         comment.
 669         (unmap_pages): Don't call abort when recursive call fails, just
 670         note and return an error if a page in the range couldn't be unmapped.
 671         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 672         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 673         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 674         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 675         don't abort on page not being mapped.  Handle non-anon filemap
 676         with length padded to pagesize.
 677
 678 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 679
 680         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 681         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 682         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 683         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 684         (TARGET_AT_CLKTCK): Remove redundant macros.
 685         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 686         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 687         callers.
 688         (sim_open): Also pass AT_SECURE.
 689
 690         * cris/sim-main.h (struct _sim_cpu): New member
 691         set_target_thread_data.
 692         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 693         * cris/crisv10f.c: Ditto.
 694         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 695         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 696         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 697         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 698         case.
 699
 700         * cris/traps.c (TARGET_SYS_exit_group): Define.
 701         (cris_break_13_handler): Handle it like the exit for the last
 702         thread.
 703
 704         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 705         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 706         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 707         2.6.27.  Set machine field to the BFD printable name of the
 708         machine.
 709
 710         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 711         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 712         TARGET_MAP_DENYWRITE.
 713
 714         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 715         (TARGET_X_OK, TARGET_F_OK): Define.
 716         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 717
 718         * cris/semcrisv32f-switch.c: Regenerate.
 719
 720 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 721
 722         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 723         just a short CRIS-specific notice.  Tweak the wording for a
 724         failing architecture test.
 725
 726         * cris/traps.c (TARGET_SYS_writev): New macro.
 727         (is_mapped_only, cris_dump_map): New functions.
 728         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 729         and prot combinations and a non-zero page-offset.  If
 730         TARGET_MAP_FIXED, unmap pages before mapping them.
 731         <case TARGET_SYS_mprotect>: When checking, allow any length
 732         argument.  Don't actually do anything.
 733         <case TARGET_SYS_writev>: New case.
 734
 735         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 736         * cris/sim-if.c: Include elf-bfd.h.
 737         (struct progbounds): New members end_loadmem, start_nonloadmem.
 738         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 739         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 740         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 741         static.  Update head comment.  Set new struct progbounds members.
 742         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 743         variables.
 744         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 745         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 746         functions.
 747         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 748         handling to use auxv_entries.  Improve error message and checking
 749         for invalid programs.  Use new variable abfd for the program
 750         instead of for each access reaching into sd to get it.
 751         (sim_create_inferior): If non-zero, use interp_start_addr instead
 752         of the program start address.
 753         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 754         stale comment.  Always specify little-endian.
 755
 756 2008-07-29  Nick Clifton  <nickc@redhat.com>
 757
 758         * common/genmloop.sh: Add new parameter: -shell to specify the
 759         command interpreter to use to run the input file.  This is
 760         necessary because otherwise SHELL is taken from the user's
 761         environment, and not from the makefile that invoked this script
 762         and the user might not be running an sh-like shell.
 763         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 764         * fr30/Makefile.in: Likewise.
 765         * frv/Makefile.in: Likewise.
 766         * i960/Makefile.in: Likewise.
 767         * iq2000/Makefile.in: Likewise.
 768         * m32r/Makefile.in: Likewise.
 769
 770         * frv/mloop.in: Add missing start of line comment marker.
 771
 772 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 773
 774         * cris/configure: Regenerate to track ../common/common.m4 changes.
 775         * cris/config.in: Ditto.
 776
 777 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 778             Daniel Jacobowitz  <dan@codesourcery.com>
 779             Joseph Myers  <joseph@codesourcery.com>
 780
 781         * cris/configure: Regenerate.
 782
 783 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 784
 785         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 786
 787 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 788
 789         * MAINTAINERS: Add myself as maintainer of cr16 port.
 790
 791 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 792
 793         Add simulator for National cr16 processor.
 794         * cr16: New directory.
 795         * configure.ac: Add entry for National cr16.
 796         * configure: Regenerate.
 797
 798 2008-02-05  DJ Delorie  <dj@redhat.com>
 799
 800         * configure.ac (v850): V850 now has a testsuite.
 801         * configure (v850): Likewise.
 802
 803 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 804
 805         Updated copyright notices for most files.
 806
 807 2007-12-19  DJ Delorie  <dj@redhat.com>
 808
 809         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 810         cut_point.
 811
 812 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 813
 814         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 815         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 816         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 817         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 818         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 819         cris/semcrisv32f-switch.c: Regenerate.
 820
 821 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 822
 823         Switch the license of all files explicitly copyright the FSF
 824         to GPLv3.
 825
 826 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 827
 828         * Makefile.in: Add dummy "pdf" target.
 829
 830 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 831
 832         * cris/traps.c (dump_statistics): Change format for cycle numbers
 833         to %llu and cast parameters to unsigned long long.
 834
 835 2007-02-16  Thiemo Seufer  <ths@mips.com>
 836
 837         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 838
 839 2007-01-28  Manuel Lauss  <slauss@resi.at>
 840
 841         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 842         (sh-*-*): Change to sh*-*-*.
 843         * configure: Regenerated.
 844
 845 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 846
 847         Updated copyright notices for most files.
 848
 849 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 850
 851         * Makefile.in (autoconf-common autoheader-common): Only run
 852         autoheader on subdirs with a file config.in.
 853
 854         * configure.ac (common): Make the default "yes" for all targets
 855         with sim subdirs.
 856         * configure: Regenerate.
 857
 858         * Makefile.in (autoconf-common autoheader-common): In documented
 859         usage, say SHELL=/bin/sh.
 860         (.PHONY): Add autoheader-common.
 861
 862         * MAINTAINERS: Add self as authorized committer for *.
 863
 864 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 865             Hans-Peter Nilsson  <hp@axis.com>
 866
 867         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 868         (cris_unknown_syscall_action): Declare.
 869         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 870         (cris_options): Add cris-unknown-syscall option.
 871         (cris_option_handler): Correct comment about and error message for
 872         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 873         * cris/traps.c: Include stdarg.h
 874         (cris_unknown_syscall): New function.
 875         (cris_break_13_handler): Instead of sim_io_eprintf and
 876         sim_engine_halt, call cris_unknown_syscall to handle more or less
 877         unknown syscalls.  Adjust code as necessary to handle return
 878         value.
 879
 880 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 881
 882         * MAINTAINERS: Add Dave Brolley for sh64.
 883
 884 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 885
 886         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 887         (cris_pipe_empty): Correct initialization of "remaining".  Only
 888         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 889         are written.
 890
 891 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 892
 893         * cris/configure.ac: Check for limits.h and sys/param.h.
 894         * cris/configure, cris/config.in: Rebuild.
 895         * cris/traps.c (SIM_PATHMAX): New macro.
 896         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 897
 898 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 899
 900         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 901         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 902         * configure: Regenerated.
 903
 904 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 905
 906         * cris/configure: Regenerated.
 907
 908 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 909
 910         * cris/configure: Regenerated.
 911
 912 2006-05-05  Andreas Schwab  <schwab@suse.de>
 913
 914         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 915         * configure: Regenerate.
 916
 917         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 918         (CC_FOR_BUILD): Don't override.
 919         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 920
 921 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 922
 923         * MAINTAINERS: Add an "Authorized committers" section, and list
 924         DJ Delorie for v850.
 925
 926 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 927
 928         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 929
 930 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 931
 932         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 933         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 934         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 935         (all): Depend on rvdummy$(EXEEXT).
 936         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 937         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 938         default off.
 939         * cris/configure: Regenerate.
 940         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 941         (enum cris_interrupt_type, crisv10deliver_interrupt)
 942         (crisv32deliver_interrupt: New declarations.
 943         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 944         sim_events_tickn and set state-events member work_pending when it's
 945         time for the next event.
 946         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 947         interrupt-delivery function.
 948         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 949         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 950         * cris/devices.c: Include hw-device.h.
 951         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 952         (device_io_write_buffer): Only perform 0x900000xx-functions if
 953         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 954         call hw_io_write_buffer.  Add return 0 last in function.
 955         * cris/sim-if.c (cris_have_900000xxif): Now global.
 956         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 957         Force "-model" option, effectively.
 958         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 959         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 960
 961 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 962
 963         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 964         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 965         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 966
 967 2006-03-13  DJ Delorie  <dj@redhat.com>
 968
 969         * MAINTAINERS: Add self as m32c sim maintainer.
 970
 971 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 972
 973         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 974         mapping.
 975         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 976
 977 2006-01-23  Jim Blandy  <jimb@redhat.com>
 978
 979         Add simulator for Renesas M32C and M16C.
 980
 981         * m32c: New directory.
 982         * configure.ac: Add entry for Renesas M32C.
 983         * configure: Regenerate.
 984
 985 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 986
 987         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 988         cycle count for the current insn.
 989
 990 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 991
 992         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 993         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 994         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 995         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 996
 997 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 998
 999         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1000         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1001         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1002         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1003         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1004         cris/semcrisv32f-switch.c: Regenerate.
1005
1006 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
1007
1008         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1009         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1010         TARGET_O_WRONLY.
1011         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1012         F_GETFL on fd 0, 1 and 2.
1013
1014 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1015
1016         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1017         last_open_fd, last_open_flags.
1018         * cris/traps.c: Don't include targ-vals.h.
1019         (TARGET_O_ACCMODE): Define.
1020         (cris_break_13_handler): Set new _sim_cpu members.
1021         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1022         Rearrange code as switch.  Emit "unimplemented" abort for
1023         unimplemented fcntl calls.
1024
1025         * cris/traps.c (TARGET_SYS_stat): Define.
1026         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1027         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1028
1029 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1030
1031         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1032         low 32 bits are used after an unsigned long cast.
1033
1034 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1035
1036         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1037
1038 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1039
1040         * MAINTAINERS: Update my mail address, move myself to the
1041         "Past maintainers" section.
1042
1043 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1044
1045         * configure.ac: Add igen to v850 build.
1046         * configure: Regenerate.
1047
1048 2005-04-29  Paul Brook  <paul@codesourcery.com>
1049
1050         * common/callback.c (PIPE_BUF): Provide default definition.
1051         (os_lstat): Use stat if lstat is not available on the host.
1052         (os_ftruncate): Return EINVAL if not available on the host.
1053         (os_truncate): Ditto.
1054         * common/configure.ac: Check for lstat, truncate and ftruncate.
1055         * common/configure: Regenerate.
1056         * common/config.in: Regenerate.
1057
1058 2005-04-27  Paul Brook  <paul@codesourcery.com>
1059
1060         * common/Make-common.in: Add $(EXEEXT) to "run".
1061
1062 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1063
1064         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1065         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1066         implemented.  In call to create_map, pad length argument to 8k.
1067
1068 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1069
1070         * configure.ac: Add explicit sh64 case.
1071         * configure: Regenerate.
1072
1073 2005-03-30  Paul Brook  <paul@codesourcery.com>
1074
1075         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1076
1077 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1078
1079         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1080         include cgen-ops.h in decodev10.c and decodev32.c.
1081         * cris/sim-main.h: Don't include cgen-ops.h here.
1082         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1083         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1084         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1085         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1086         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1087         cris/semcrisv32f-switch.c: Regenerate.
1088
1089         * cris/traps.c (cris_break_13_handler) <case
1090         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1091         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1092
1093 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1094
1095         * cris/configure: Regenerate.
1096
1097 2005-02-28  Jim Blandy  <jimb@redhat.com>
1098
1099         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1100         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1101         Regenerated, after change to common/aclocal.m4.
1102
1103 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1104
1105         * iq2000: New target subdirectory.
1106         * configure.ac: Add iq2000 target.
1107         * configure: Regenerate.
1108
1109 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1110
1111         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1112         (realclean, install): Fail if subdir make failed.
1113
1114 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1115
1116         * cris: New directory, simulator for Axis Communications CRIS
1117         including CRIS v32, CGEN-based.
1118         * configure.ac: Add corresponding configury.
1119         * configure: Regenerate.
1120
1121 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1122
1123         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1124         common directory.  Remove sparc*-*-* from list.
1125
1126 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1127
1128         * Makefile.in (autoconf-common autoheader-common): Add --force to
1129         autoconf and autoheader.
1130         (autoconf-common autoheader-common)
1131         (autoconf-install autoheader-install): Check for configure.ac, not
1132         configure.in.
1133         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1134         * configure: Re-generate.
1135
1136 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1137
1138         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1139         correctly calls AC_CONFIG_SUBDIRS.
1140         * configure: Re-generate.
1141
1142 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1143
1144         * i960, h8500: Delete directory.
1145
1146 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1147
1148         * d30v, fr30, mn10200, z8k: Delete directory.
1149
1150 2004-03-10  Ben Elliston  <bje@gnu.org>
1151
1152         * MAINTAINERS: Update my mail address.
1153
1154 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1155
1156         * configure.in (mips*-*-*): Configure in testsuite.
1157         * configure: Regenerate.
1158
1159 2003-10-08  Dave Brolley  <brolley@redhat.com>
1160
1161         * configure.in: Move frv handling to alphabetically correct placement.
1162
1163 2003-09-03  Andreas Schwab  <schwab@suse.de>
1164
1165         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1166
1167 2003-08-29  Dave Brolley  <brolley@redhat.com>
1168
1169         * MAINTAINERS: Add myself as maintainer of the FRV port.
1170
1171 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1172             Dave Brolley  <brolley@redhat.com>
1173
1174         * frv/: New directory, simulator for the Fujitsu FRV.
1175         * configure.in: Add frv configury.
1176         * configure: Regenerate.
1177
1178 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1179
1180         * MAINTAINERS: Update my mail address.
1181
1182 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1183
1184         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1185         maintenance.  List igen and sh maintainers.  Mention that target
1186         and global maintainers pick up the slack.
1187
1188 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1189
1190         * configure.in: Add testsuite to extra_subdirs for sh.
1191         * configure: Regenerate.
1192
1193 2003-01-23  Nick Clifton  <nickc@redhat.com>
1194
1195         * Add sh2e support:
1196
1197 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1198
1199         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1200
1201 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1202
1203         * MAINTAINERS: Update my email address.
1204
1205 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1206
1207         * w65/: Delete directory.
1208
1209 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1210
1211         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1212         * configure: Re-generate.
1213
1214 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1215
1216         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1217         * configure: Re-generate.
1218
1219 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1220
1221         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1222         id, date and host to be overriden by NAME, ID, DATE and HOST
1223         respectfully.  Use ISO dates.
1224
1225 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1226
1227         * Makefile.in (ChangeLog): New makefile variable.
1228         * README-HACKING: Mention the ChangeLog makefile variable.
1229
1230 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1231
1232         * tic80/: Delete directory.
1233
1234 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1235
1236         * MAINTAINERS: Update my email address.
1237
1238 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1239
1240         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1241
1242 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1243
1244         * MAINTAINERS: Record self as a co-maintainer of just common/.
1245
1246 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1247
1248         * MAINTAINERS: Point to GDB files describing overall maintaince
1249         and check-in procedures.
1250
1251 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1252
1253         * MAINTAINERS: Add myself for ARM portions.
1254
1255 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1256
1257         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1258         * configure: Re-generate.
1259
1260 2001-02-16  Ben Elliston  <bje@redhat.com>
1261
1262         * MAINTAINERS: Add myself for common portions.
1263
1264 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1265
1266         * MAINTAINERS: Added self and Andrew for the mips sim.
1267
1268 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1269
1270         * MAINTAINERS: Added self and Andrew for the ppc sim.
1271
1272 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1273
1274         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1275         * m68hc11: New directory.
1276         * configure.in: Add.
1277         * configure: Regenerate.
1278
1279 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1280
1281         * tic80: New directory.
1282         * configure.in: Add configury.
1283         * configure: Regenerate.
1284
1285 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1286
1287         * configure.in (extra_subdirs): Add testsuite to strongarm
1288         directories.
1289         * configure: Regenerate.
1290
1291 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1292
1293         * MAINTAINERS: New file.  Blank.
1294
1295 1999-11-18  Ben Elliston  <bje@cygnus.com>
1296
1297         * configure.in: Require autoconf 2.13 and remove obsolete
1298         invocation of AC_C_CROSS.
1299         * configure: Regenerate.
1300
1301 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1302
1303         * configure.in: Configure the testsuite directory for thumb.
1304         * configure: Regenerate.
1305
1306 1999-07-16  Ben Elliston  <bje@cygnus.com>
1307
1308         * configure.in: Configure the testsuite directory for arm.
1309         * configure: Regenerate.
1310
1311 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1312
1313         * configure.in: Add support for MCore target.
1314         * configure: Regenerate.
1315
1316 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1317
1318         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1319         RUNTEST instead of commenting out, fixes portability problem.
1320
1321 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1322
1323         * configure.in: Add support for StrongARM target.
1324         * configure: Regenerate.
1325
1326 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1327
1328         * configure.in: Require autoconf 2.12.1 or higher.
1329
1330 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1331
1332         * configure.in (i960-*-*): Add.
1333         * configure: Rebuild.
1334
1335 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1336
1337         * configure.in: Added case for fr30-*-*.
1338         * configure: Regenerated.
1339
1340 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1341
1342         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1343         to allow successful operation on Windows.
1344
1345 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1346
1347         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1348         check can be invoked recursively.
1349
1350 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1351
1352         * configure.in: Build simulator on sparclite and sparc86x targets.
1353         * configure: Regenerate.
1354
1355 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1356
1357         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1358         to autoconf and autoheader.
1359
1360 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1361
1362         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1363         ../common' to autoconf and autoheader.  Unconditionally run
1364         autoconf in every subdir.
1365         (autoconf-changelog autoheader-changelog): Unconditionally run
1366         commands in every subdir.
1367         (autoconf-install autoheader-install): Likewise.
1368
1369 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1370
1371         * Makefile.in:  Get SHELL from configure.
1372         * (FLAGS_TO_PASS):  Pass down SHELL.
1373         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1374         NT native builds.
1375
1376 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1377
1378         * configure.in (extra_subdirs): Enable igen for mn10300.
1379         * configure: Re-generate.
1380
1381 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1382
1383         * configure.in (extra_subdirs): Add support for thumb target.
1384
1385         * configure (extra_subdirs): Add support for thumb target.
1386
1387 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1388
1389         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1390         target.
1391         * configure: Regenerate.
1392
1393 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1394
1395         * configure.in (extra_subdirs): v850ea needs igen.
1396         * configure: Re-generate.
1397
1398 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1399
1400         * configure.in (testdir): When a testsuite directory, add that to
1401         the list of confdirs.
1402
1403 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1404
1405         * configure.in (extra_subdirs): Enable igen ready for V850.
1406
1407 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1408
1409         * configure.in (w65-*-*, only_if_enabled): Set.
1410         * configure: Re-generate.
1411
1412 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1413
1414         * configure.in (sparc*-*-*, only_if_enabled): Set
1415         only_if_enabled=yes.  Check only_if_enabled before enabling a
1416         simulator.
1417         * configure: Regenerate.
1418
1419 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1420
1421         * configure.in (extra_subdirs): Add v850e target.
1422
1423 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1424
1425         * configure.in (extra_subdirs): Add v850ea target.
1426
1427 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1428
1429         * configure.in (sparc*-*-*): Don't build erc32.
1430         * configure: Regenerate.
1431
1432 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1433
1434         * configure.in (m32r-*-*): New target.
1435         * configure: Regenerate.
1436
1437         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1438
1439 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1440
1441         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1442         thought that .NOEXPORT was the default target.
1443
1444 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1445
1446         * Makefile.in (clean mostlyclean): Restore targets accidentally
1447         deleted in earlier change.
1448
1449 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1450
1451         * Makefile.in (autoheader-common, autoheader-changelog,
1452         autoheader-install): Perform autoheader in addition to autoconf.
1453
1454 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1455
1456         * Makefile.in (autoconf-install): New target.
1457         (autoconf-changelog): Try different way to obtain user name.
1458
1459 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1460
1461         * Makefile.in (autoconf-changelog): New target, update
1462         ChangeLog for all subdirectories - normally used after
1463         autoconf-common target.
1464
1465 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1466
1467         * configure.in (extra_subdirs): Include testsuite for d30v.
1468         * configure: Regenerate.
1469
1470         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1471         ../gdb/Makefile.in
1472         (check): New rules - drive the testsuite.
1473
1474 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1475
1476         * configure.in: Add mn10200 configure lines accidentally
1477         removed.
1478         * configure: Regenerated.
1479
1480 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1481
1482         * configure.in (extra_subdirs): Generalize common sub directory
1483         into a list.
1484         (extra_subdirs): For d30v add igen to the list to be built.
1485
1486 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1487
1488         * configure.in (d30v): New target.
1489         * configure: Regenerated.
1490
1491 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1492
1493         * configure.in: Don't require GCC to build the mn10200
1494         simulator anymore.
1495         * configure: Rebuilt.
1496
1497 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1498
1499         * configure.in: Don't configure any subdirs if no simulator
1500         is being built.  Don't use erc32 for sparc64.
1501         * configure: Regenerated.
1502
1503 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1504
1505         * Makefile.in (autoconf-common): New target.
1506         * configure.in: Do configure common.
1507         * configure: Regenerated.
1508
1509 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1510
1511         * configure configure.in:  Don't configure common anymore.  Files
1512         from common are now built in the individual simualtor directories.
1513         This fixes problems with the WinGDB build procedure.
1514
1515 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1516
1517         * configure: Enable the mn10200 simulator.
1518
1519 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1520
1521         * configure.in (configdirs): Add common.
1522         * configure: Regenerated.
1523
1524 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1525
1526         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1527         system V based targets.
1528         * configure: Regenerate.
1529
1530 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1531
1532         * configure.in (--enable-sim-powerpc): Delete.
1533         (--enable-sim): Add.
1534         * configure: Regenerated.
1535
1536 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1537
1538         * configure.in: Only build the V850 simulator if
1539         we are using gcc.
1540         * configure: Rebuild.
1541
1542 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1543
1544         * configure.in: Do build erc32 for DOS and Windows hosts.
1545         * configure: Rebuild.
1546
1547 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1548
1549         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1550         be inherited from the parent.  Remove INSTALL_XFORM and
1551         INSTALL_XFORM1.  Make INSTALL be set from configure.
1552
1553 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1554
1555         * configure.in: Only build the MIPS simulator if we are using
1556         gcc.
1557         * configure: Rebuild.
1558
1559 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1560
1561         * configure.in (v850-*-*): Added V850 simulator.
1562
1563 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1564
1565         * configure.in (d10v-*-*): Added D10V simulator.
1566
1567 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1568
1569         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1570         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1571         (docdir): Removed.
1572         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1573         (AC_PROG_INSTALL): Added.
1574         * configure: Rebuilt.
1575
1576 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1577
1578         * configure.in: Only configure erc32 if using gcc.
1579         * configure: Rebuild.
1580
1581 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1582
1583         * configure.in (sim_target): Build PowerPC simulator for powerpc
1584         System V.4, Solaris, and Elf targets.
1585         * configure: Regenerate with autoconf 2.10.
1586
1587 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1588
1589         * configure.in: Only built erc32 simulator on Unix hosts as it
1590         uses pseudo ttys.
1591         * configure: Regenerated with autoconf 2.8.
1592
1593 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1594
1595         * erc32: Sparc simulator from the ESA.
1596
1597 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1598
1599         From: Miles Bader  <miles@gnu.ai.mit.edu>
1600         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1601         * configure: Regenerate using autoconf.
1602
1603 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1604
1605         * Makefile.in (install): Fix typo.
1606
1607 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1608
1609         * configure: Regenerate with autoconf 2.7.
1610
1611         * Makefile.in (all): Simplify.
1612         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1613         as in the all target.
1614         (distclean, maintainer-clean, realclean): Likewise.
1615         (install): Likewise.
1616
1617 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1618
1619         * Makefile.in (all): Remove extra '\' char from shell script.
1620
1621 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1622
1623         * Makefile.in (all): Avoid a for loop with zero elements, even if
1624         the loop will not be executed because of an if statement.
1625
1626 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1627
1628         * Makefile.in (install): Add missing semicolon in "fi \".
1629
1630 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1631
1632         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1633         defaults from configure.
1634
1635         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1636         configure defaults.
1637         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1638         if either --enable-sim-powerpc is used, or the host compiler is
1639         GCC.
1640
1641 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1642
1643         * configure.in (mips*-*-*): Added "mips" simulator target.
1644         * configure: Re-generated.
1645
1646 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1647
1648         * Makefile.in (BISON): Remove macro.
1649         (FLAGS_TO_PASS): Remove BISON.
1650
1651 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1652
1653         * configure.in:  Explicitly `exit 0' for broken shells.
1654         * configure:  Rebuilt.
1655
1656 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1657
1658         * common/run.c (main): Initialize the callbacks.
1659
1660 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1661
1662         * Makefile.in (maintainer-clean): New synonym for realclean.
1663
1664 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1665
1666         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1667         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1668
1669 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1670
1671         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1672         <cagney@highland.com.au>.
1673         * configure: Regnerate from configure.in.
1674
1675 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1676
1677         * Update all FSF addresses except those in COPYING* files.
1678
1679 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1680
1681         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1682         submakes either default or passed in value.
1683
1684 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1685
1686         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1687           install): Changed targets so that they descend all
1688           subdirectories in $(SUBDIRS).
1689           (*-all, *-clean, *-install): Removed targets.
1690
1691         * configure.in: Don't bother with target makefile fragments, they
1692           are no longer needed.
1693         * configure: regenerated.
1694
1695         * Makefile.in, configure.in: converted to autoconf.
1696         * configure: New file, generated with autconf 2.4.
1697
1698 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1699
1700         * Makefile.in: Support ARM.
1701         * configure.in: Ditto.
1702
1703 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1704
1705         * Makefile.in: Support W65.
1706         * configure.in: Ditto.
1707
1708 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1709
1710         * Makefile.in: Add TAGS target.
1711
1712 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1713
1714         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1715           install-h8300, clean-h8300, all-h8500, install-h8500,
1716           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1717           recursion lines.
1718
1719 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1720
1721         * Makefile.in: remove endian.h trace from h8500
1722
1723 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1724
1725         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1726
1727 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1728
1729         * Makefile.in: make all of the all-* target (except all-nothing)
1730         depend on endian.h, so that if we're not building a simulator, we
1731         don't built endian
1732
1733 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1734
1735         * Makefile.in (check, installcheck): Added dummy targets.
1736
1737 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1738
1739         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1740         explicitly make it, since some makes apparently don't work with
1741         VPATH and .c to executable rules (SunOS make for example).
1742
1743 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1744
1745         * Makefile.in (endian): Add explicit rule for broken makes.
1746
1747 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1748
1749         * Makefile.in (info, install-info): New targets.
1750         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1751         level Makefile.
1752
1753 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1754
1755         * Makefile.in (endian.h): build endian.h via a temporary file so
1756           that we don't leave an incomplete file lying around on
1757           interrupted builds.
1758           (clean): remove endian, e.h, and endian.h.
1759
1760 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1761
1762         * Makefile.in, configure.in: if target isn't supported, build a
1763         harmless makefile.
1764
1765