sim/ChangeLog

   1 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
   2
   3         * MAINTAINERS: Add Andrew Burgess as global maintainer.
   4
   5 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
   6
   7         * sim-base.h: Add 'extern C' if header is compiled with C++.
   8
   9 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
  10
  11         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
  12         cgen source tree.
  13         * cris/configure: Regenerate.
  14         * frv/configure: Regenerate.
  15         * iq2000/configure: Regenerate.
  16         * lm32/configure: Regenerate.
  17         * m32r/configure: Regenerate.
  18         * or1k/configure: Regenerate.
  19         * sh64/configure: Regenerate.
  20
  21 2018-10-05  Stafford Horne  <shorne@gmail.com>
  22
  23         * or1k/cpu.h: Regenerate.
  24         * or1k/decode.c: Regenerate.
  25         * or1k/decode.h: Regenerate.
  26         * or1k/model.c: Regenerate.
  27         * or1k/sem-switch.c: Regenerate.
  28         * or1k/sem.c: Regenerate:
  29
  30 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  31
  32         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  33         ISA maintenance.
  34
  35 2018-07-19  DJ Delorie  <dj@redhat.com>
  36
  37         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  38
  39 2018-07-14  Stafford Horne  <shorne@gmail.com>
  40
  41         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  42
  43 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  44
  45         * All configure.ac: Remove AC_PREREQ.
  46         * All configure: Re-generate.
  47
  48 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  49
  50         * MAINTAINERS: Update my company e-mail address.
  51
  52 2017-12-12  Stafford Horne  <shorne@gmail.com>
  53             Peter Gavin  <pgavin@gmail.com>
  54
  55         * configure: Regenerated.
  56         * or1k/aclocal.m4: Generated.
  57         * or1k/config.in: Generated.
  58         * or1k/configure: Generated.
  59
  60 2017-12-12  Stafford Horne  <shorne@gmail.com>
  61             Peter Gavin  <pgavin@gmail.com>
  62
  63         * or1k/arch.c: Generated.
  64         * or1k/arch.h: Generated.
  65         * or1k/cpu.c: Generated.
  66         * or1k/cpu.h: Generated.
  67         * or1k/cpuall.h: Generated.
  68         * or1k/decode.c: Generated.
  69         * or1k/decode.h: Generated.
  70         * or1k/model.c: Generated.
  71         * or1k/sem-switch.c: Generated.
  72         * or1k/sem.c: Generated.
  73
  74 2017-12-12  Stafford Horne  <shorne@gmail.com>
  75             Peter Gavin  <pgavin@gmail.com>
  76
  77         * configure.tgt: Add or1k sim.
  78         * or1k/README: New file.
  79         * or1k/Makefile.in: New file.
  80         * or1k/configure.ac: New file.
  81         * or1k/mloop.in: New file.
  82         * or1k/or1k-sim.h: New file.
  83         * or1k/or1k.c: New file.
  84         * or1k/sim-if.c: New file.
  85         * or1k/sim-main.h: New file.
  86         * or1k/traps.c: New file.
  87
  88 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
  89
  90         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
  91
  92 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  93
  94         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
  95
  96 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  97
  98         * MAINTAINERS (ft32): Add myself.
  99
 100 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 101
 102         * MAINTAINERS (aarch64): Update my email address.
 103
 104 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 105
 106         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 107         * configure: Regenerate.
 108
 109 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 110
 111         * MAINTAINTERS (aarch64): Add myself.
 112
 113 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 114
 115         * MAINTAINERS (Maintainers for particular sims): Add myself as
 116         a MIPS maintainer.
 117
 118 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 119
 120         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 121
 122 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 123
 124         * configure.ac: Delete sim_common check and the
 125         AC_CONFIG_SUBDIRS(common) call.
 126         * configure: Regenerate.
 127         * configure.tgt (sim_common): Delete the variable.
 128
 129 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 130
 131         * .gitignore: Delete /common/cconfig.h entry.
 132
 133 2016-01-05  Nick Clifton  <nickc@redhat.com>
 134
 135         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 136
 137 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 138
 139         * aarch64/simulator.c: Remove syscall.h include.
 140
 141 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * README-HACKING: Delete mention of tconfig.h.
 144
 145 2015-11-24  Nick Clifton  <nickc@redhat.com>
 146
 147         * configure.tgt: Add aarch64 entry.
 148         * configure: Regenerate.
 149
 150 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 151
 152         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 153         * configure: Regenerate.
 154
 155 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * README-HACKING: Change configure.in to configure.ac.
 158
 159 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 160
 161         * arm/configure: Regenerated.
 162         * avr/configure: Likewise.
 163         * bfin/configure: Likewise.
 164         * common/configure: Likewise.
 165         * cr16/configure: Likewise.
 166         * cris/configure: Likewise.
 167         * d10v/configure: Likewise.
 168         * erc32/configure: Likewise.
 169         * frv/configure: Likewise.
 170         * ft32/configure: Likewise.
 171         * h8300/configure: Likewise.
 172         * igen/configure: Likewise.
 173         * iq2000/configure: Likewise.
 174         * lm32/configure: Likewise.
 175         * m32c/configure: Likewise.
 176         * m32r/configure: Likewise.
 177         * m68hc11/configure: Likewise.
 178         * mcore/configure: Likewise.
 179         * microblaze/configure: Likewise.
 180         * mips/configure: Likewise.
 181         * mn10300/configure: Likewise.
 182         * moxie/configure: Likewise.
 183         * msp430/configure: Likewise.
 184         * ppc/configure: Likewise.
 185         * rl78/configure: Likewise.
 186         * rx/configure: Likewise.
 187         * sh/configure: Likewise.
 188         * sh64/configure: Likewise.
 189         * v850/configure: Likewise.
 190
 191 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 192
 193         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 194         (BFD_LIB): Remove $(ZLIB).
 195         (CONFIG_LIBS): Add $(ZLIB).
 196         * ppc/Makefile.in (ZLIBINC): Removed.
 197         (INCLUDES): Remove $(ZLIBINC).
 198         (BFD_LIB): Remove $(ZLIB).
 199
 200 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 201
 202         * arm/configure: Regenerated.
 203         * avr/configure: Likewise.
 204         * bfin/configure: Likewise.
 205         * common/configure: Likewise.
 206         * cr16/configure: Likewise.
 207         * cris/configure: Likewise.
 208         * d10v/configure: Likewise.
 209         * erc32/configure: Likewise.
 210         * frv/configure: Likewise.
 211         * ft32/configure: Likewise.
 212         * h8300/configure: Likewise.
 213         * igen/configure: Likewise.
 214         * iq2000/configure: Likewise.
 215         * lm32/configure: Likewise.
 216         * m32c/configure: Likewise.
 217         * m32r/configure: Likewise.
 218         * m68hc11/configure: Likewise.
 219         * mcore/configure: Likewise.
 220         * microblaze/configure: Likewise.
 221         * mips/configure: Likewise.
 222         * mn10300/configure: Likewise.
 223         * moxie/configure: Likewise.
 224         * msp430/configure: Likewise.
 225         * ppc/configure: Likewise.
 226         * rl78/configure: Likewise.
 227         * rx/configure: Likewise.
 228         * sh/configure: Likewise.
 229         * sh64/configure: Likewise.
 230         * v850/configure: Likewise.
 231
 232 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 233
 234         * configure: Regenerate.
 235         * configure.ac: Delete sim_testsuite check and config in testsuite.
 236         * configure.tgt (sim_testsuite): Delete everywhere.
 237
 238 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 239
 240         * configure: Regenerate.
 241         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 242
 243 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 244
 245         * configure.tgt: Add FT32 entry.
 246         * configure: Regenerate.
 247
 248 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 249
 250         * .gitignore: Delete tconfig.h.
 251         * README-HACKING: Change tconfig.in to tconfig.h.
 252
 253 2014-03-12  Nick Clifton  <nickc@redhat.com>
 254
 255         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 256
 257 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 258
 259         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 260         * configure: Regenerate.
 261
 262 2014-01-06  Tom Tromey  <tromey@redhat.com>
 263
 264         * common/cgen-trace.c: Don't use old VA_* macros.
 265         * common/sim-load.c (xprintf): Likewise.
 266         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 267
 268 2014-01-06  Tom Tromey  <tromey@redhat.com>
 269
 270         * README-HACKING: Don't use PARAMS.
 271         * arm/wrapper.c: Don't use PARAMS.
 272         * bfin/sim-main.h: Don't use PARAMS.
 273         * common/callback.c: Don't use PARAMS.
 274         * common/cgen-trace.c: Don't use PARAMS.
 275         * common/run-sim.h: Don't use PARAMS.
 276         * common/run.c: Don't use PARAMS.
 277         * common/sim-base.h: Don't use PARAMS.
 278         * common/sim-load.c: Don't use PARAMS.
 279         * common/sim-options.h: Don't use PARAMS.
 280         * common/sim-trace.c: Don't use PARAMS.
 281         * common/sim-trace.h: Don't use PARAMS.
 282         * common/sim-utils.h: Don't use PARAMS.
 283         * cr16/cr16_sim.h: Don't use PARAMS.
 284         * cr16/gencode.c: Don't use PARAMS.
 285         * cr16/interp.c: Don't use PARAMS.
 286         * cr16/simops.c: Don't use PARAMS.
 287         * d10v/d10v_sim.h: Don't use PARAMS.
 288         * d10v/gencode.c: Don't use PARAMS.
 289         * d10v/interp.c: Don't use PARAMS.
 290         * d10v/simops.c: Don't use PARAMS.
 291         * erc32/erc32.c: Don't use PARAMS.
 292         * erc32/exec.c: Don't use PARAMS.
 293         * erc32/float.c: Don't use PARAMS.
 294         * erc32/func.c: Don't use PARAMS.
 295         * erc32/sis.c: Don't use PARAMS.
 296         * erc32/sis.h: Don't use PARAMS.
 297         * mips/interp.c: Don't use PARAMS.
 298         * mips/sim-main.h: Don't use PARAMS.
 299         * sh/interp.c: Don't use PARAMS.
 300         * v850/sim-main.h: Don't use PARAMS.
 301         * v850/v850_sim.h: Don't use PARAMS.
 302
 303 2013-11-07  Will Newton  <will.newton@linaro.org>
 304
 305         PR gdb/15508
 306         * arm/wrapper.c (sim_create_inferior): Call init before
 307         accessing STATE.
 308
 309 2013-11-07  Will Newton  <will.newton@linaro.org>
 310
 311         PR gdb/8989
 312         * arm/wrapper.c (sim_create_inferior): Avoid calling
 313         bfd_get_mach with a NULL bfd.
 314
 315 2013-06-21  Nick Clifton  <nickc@redhat.com>
 316
 317         * msp430: New Directory.
 318         * configure.tgt: Add it.
 319         * configure: Regenerate.
 320
 321 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 322
 323         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 324         * avr/interp.c (sim_complete_command): Ditto.
 325         * common/sim-options.c (sim_complete_command): Ditto.
 326         * cr16/interp.c (sim_complete_command): Ditto.
 327         * erc32/interf.c (sim_complete_command): Ditto.
 328         * m32c/gdb-if.c (sim_complete_command): Ditto.
 329         * microblaze/interp.c (sim_complete_command): Ditto.
 330         * ppc/sim_calls.c (sim_complete_command): Ditto.
 331         * rl78/gdb-if.c (sim_complete_command): Ditto.
 332         * rx/gdb-if.c (sim_complete_command): Ditto.
 333         * sh/interp.c (sim_complete_command): Ditto.
 334
 335 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 336
 337         Update year range in copyright notice of all files.
 338
 339 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 340
 341         Update old contact info in GPL license notices.
 342
 343 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 344
 345         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 346
 347 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 348
 349         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 350         condition.
 351         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 352         * arm/configure: Regenerate.
 353         * avr/configure: Regenerate.
 354         * bfin/configure: Regenerate.
 355         * common/configure: Regenerate.
 356         * cr16/configure: Regenerate.
 357         * cris/configure: Regenerate.
 358         * d10v/configure: Regenerate.
 359         * erc32/configure: Regenerate.
 360         * frv/configure: Regenerate.
 361         * h8300/configure: Regenerate.
 362         * igen/configure: Regenerate.
 363         * iq2000/configure: Regenerate.
 364         * lm32/configure: Regenerate.
 365         * m32c/configure: Regenerate.
 366         * m32r/configure: Regenerate.
 367         * m68hc11/configure: Regenerate.
 368         * mcore/configure: Regenerate.
 369         * microblaze/configure: Regenerate.
 370         * mips/configure: Regenerate.
 371         * mn10300/configure: Regenerate.
 372         * moxie/configure: Regenerate.
 373         * ppc/configure: Regenerate.
 374         * rl78/configure: Regenerate.
 375         * rx/configure: Regenerate.
 376         * sh/configure: Regenerate.
 377         * sh64/configure: Regenerate.
 378         * testsuite/configure: Regenerate.
 379         * v850/configure: Regenerate.
 380
 381 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 382
 383         * MAINTAINERS: Update my email address.
 384
 385 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 386
 387         * mips/basic.exp: Add mips*-mti-elf* target.
 388         * configure.ac: Add mips*-mti-elf* target.
 389         * configure: Regenerate.
 390
 391 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 392
 393         * configure: Regenerate.
 394
 395 2012-06-06  Michael Eager  <eager@eagercon.com>
 396
 397         * microblaze/interp.c (config.h): Add #include.
 398
 399 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 400
 401         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 402         Frysinger.
 403
 404 2011-11-28  DJ Delorie  <dj@redhat.com>
 405
 406         * configure.tgt: Add rl78 support.
 407         * configure: Regenerate.
 408         * rl78: New directory.
 409         * MAINTAINERS: Add myself as RL78 maintainer.
 410
 411 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 412
 413         * MAINTAINERS: Remove Thiemo Seufer.
 414
 415 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 416
 417         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 418         * configure: Regenerate.
 419
 420 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 421
 422         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 423         handle targets.
 424         * configure: Regenerate.
 425
 426 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 427
 428         * MAINTAINERS: Add bfin entry.
 429         * configure.tgt (bfin-*-*): Handle bfin targets.
 430         * configure: Regenerate.
 431
 432 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 433
 434         * .gitignore: Add /*/hw-config.h.
 435
 436 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 437
 438         * .gitignore: New file.
 439
 440 2010-07-28  DJ Delorie  <dj@redhat.com>
 441
 442         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 443
 444 2010-06-08  Nick Clifton  <nickc@redhat.com>
 445
 446         * reg.c (set_oszc): Use unsigned int for the mask.
 447         (set_szc, set_osz, set_sz): Likewise.
 448
 449 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 450
 451         * configure.ac: Target logic moved out to and included from ...
 452         * configure.tgt: ... this new file.
 453         * configure: Regenerated.
 454
 455 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 456
 457         * README-HACKING: Add more sections.
 458
 459 2010-02-11  Doug Evans  <dje@sebabeach.org>
 460
 461         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 462         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 463         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 464         * cris/semcrisv32f-switch.c: Regenerate.
 465
 466 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 467
 468         * avr/configure: Regenerate.
 469         * cris/configure: Regenerate.
 470         * microblaze/configure: Regenerate.
 471
 472 2010-01-02  Doug Evans  <dje@sebabeach.org>
 473
 474         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 475         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 476         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 477         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 478         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 479         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 480
 481 2010-01-01  Doug Evans  <dje@sebabeach.org>
 482
 483         * cris/mloop.in: Fix copyright year update snafu.
 484
 485 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 486
 487         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 488         * common/common.m4: Use AM_ZLIB to check for zlib support.
 489         * ppc/configure.ac: Likewise.
 490         * arm/configure, avr/configure, common/configure, cr16/configure,
 491         cris/configure, d10v/configure, erc32/configure, frv/configure,
 492         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 493         m32r/configure, m68hc11/configure, mcore/configure,
 494         microblaze/configure, mips/configure, mn10300/configure,
 495         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 496         v850/configure: Regenerate.
 497
 498 2009-11-24  DJ Delorie  <dj@redhat.com>
 499
 500         * rx: New directory.
 501         * configure.ac: Add entry for Renesas RX.
 502         * configure: Regenerate.
 503
 504 2009-11-22  Doug Evans  <dje@sebabeach.org>
 505
 506         * cris/cpuall.h: Regenerate.
 507         * cris/cpuv10.h: Regenerate.
 508         * cris/cpuv32.h: Regenerate.
 509         * cris/decodev10.c: Regenerate.
 510         * cris/decodev10.h: Regenerate.
 511         * cris/decodev32.c: Regenerate.
 512         * cris/decodev32.h: Regenerate.
 513
 514 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 515
 516         * avr/interp.c (sim_write): Allow byte access.
 517         (sim_read): Ditto.
 518
 519 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 520
 521         * avr/interp.c (sim_load): Clear memory before loading.
 522
 523 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 524
 525         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 526
 527 2009-10-23  Doug Evans  <dje@sebabeach.org>
 528
 529         * cris/arch.c: Regenerate.
 530         * cris/arch.h: Regenerate.
 531         * cris/cpuall.h: Regenerate.
 532         * cris/cpuv10.c: Regenerate.
 533         * cris/cpuv10.h: Regenerate.
 534         * cris/cpuv32.c: Regenerate.
 535         * cris/cpuv32.h: Regenerate.
 536         * cris/cris-desc.c: Regenerate.
 537         * cris/cris-desc.h: Regenerate.
 538         * cris/cris-opc.h: Regenerate.
 539         * cris/decodev10.c: Regenerate.
 540         * cris/decodev10.h: Regenerate.
 541         * cris/decodev32.c: Regenerate.
 542         * cris/decodev32.h: Regenerate.
 543         * cris/modelv10.c: Regenerate.
 544         * cris/modelv32.c: Regenerate.
 545         * cris/semcrisv10f-switch.c: Regenerate.
 546         * cris/semcrisv32f-switch.c: Regenerate.
 547
 548 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 549
 550         * avr/interp.c (sim_stop): Return 1.
 551
 552 2009-10-16  Doug Evans  <dje@sebabeach.org>
 553
 554         * MAINTAINERS: Add myself as m32r maintainer.
 555
 556 2009-10-15  Michael Egaer  <eager@eagercon.com>
 557
 558         * MAINTAINERS: Add self as MicroBlaze maintainer.
 559
 560 2009-10-14  Ben Elliston  <bje@gnu.org>
 561
 562         * MAINTAINERS (common): Move myself to "past maintainers" section.
 563
 564 2009-10-06  Michael Eager  <eager@eagercon.com>
 565
 566         * microblaze/interp.c: Add include microblaze-dis.h.
 567
 568 2009-09-23  Michael Eager  <eager@eagercon.com>
 569
 570         * configure: Add microblaze-*.* (not regenerated).
 571         * configure.ac: Likewise.
 572         * microblaze/config.in: New.
 573         * microblaze/configure: Generate.
 574         * microblaze/configure.ac: New.
 575         * microblaze/interp.c: New.
 576         * microblaze/Makefile.in: New.
 577         * microblaze/microblaze.h: New.
 578         * microblaze/microblaze.isa: New.
 579         * microblaze/sim-main.h: New.
 580         * microblaze/sysdep.h: New.
 581
 582 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 583
 584         * avr/config.in: Regenerate.
 585         * avr/configure: Likewise.
 586         * configure: Likewise.
 587         * cris/config.in: Likewise.
 588         * cris/configure: Likewise.
 589
 590         * configure.ac: m4_include toplevel config/override.m4.
 591         * configure: Regenerate.
 592         * avr/configure: Regenerate.
 593         * cris/configure: Regenerate.
 594
 595 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 596
 597         * Makefile.in (datarootdir): New variable.
 598
 599 2009-05-18  Jon Beniston <jon@beniston.com>
 600
 601         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 602         * configure.ac: Add lm32 target.
 603         * lm32: New directory.
 604
 605 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 606
 607         * MAINTAINERS: Orphan ppc.
 608
 609 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 610
 611         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 612         m32c_signal_to_target.  Change signal return values from SIGILL,
 613         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 614         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 615
 616 2009-04-30  Anthony Green  <green@moxielogic.com>
 617
 618         * MAINTAINERS: Add myself for the moxie port.
 619         * moxie: New directory.
 620         * configure.ac: Add entry for moxie.
 621         * configure: Regenerate.
 622
 623 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 624
 625         * avr: New directory.
 626         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 627         * avr/config.in: New file, generated by autoheader.
 628         * avr/configure: New file generated by autoconf.
 629         * configure.ac: Add avr.
 630         * configure: Regenerated.
 631
 632 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 633
 634         * Makefile.in: Add dummy install-pdf, html, and
 635         install-html targets.
 636
 637 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 638
 639         * cris/sim-if.c: Include errno.h.
 640         (cris_start_address, cris_program_offset): New variables.
 641         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 642         enums.
 643         (cris_options): New options --cris-program-offset and
 644         --cris-start-address.
 645         (cris_option_handler): Handle new options.
 646         (cris_program_offset_write, cris_set_section_offset_iterator)
 647         (cris_offset_sections, cris_offset_sections): New functions.
 648         (sim_load): Use cris_program_offset_write as function argument to
 649         cris_load_elf_file, not sim_write.
 650         (struct offsetinfo): New struct.
 651         (cris_handle_interpreter): Fix typo in comment.
 652         (sim_open): Call cris_offset_sections as soon as the bfd of the
 653         infile is available.  Gate bfd validity checks on abfd non-NULL.
 654         (sim_create_inferior): Let cris_start_address when != -1 override
 655         other start-address choices.
 656
 657 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 658
 659         * cris/traps.c (abort): Define to call sim_io_error.
 660         (create_map): Make -1 imply a non-fixed address, not 0.  All
 661         callers changed.  Only prefer the next higher unmapped address if
 662         the last mapped address is no less than 0x40000000.  Check that
 663         the address to be mapped is not already mapped.  Update head
 664         comment.
 665         (unmap_pages): Don't call abort when recursive call fails, just
 666         note and return an error if a page in the range couldn't be unmapped.
 667         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 668         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 669         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 670         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 671         don't abort on page not being mapped.  Handle non-anon filemap
 672         with length padded to pagesize.
 673
 674 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 675
 676         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 677         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 678         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 679         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 680         (TARGET_AT_CLKTCK): Remove redundant macros.
 681         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 682         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 683         callers.
 684         (sim_open): Also pass AT_SECURE.
 685
 686         * cris/sim-main.h (struct _sim_cpu): New member
 687         set_target_thread_data.
 688         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 689         * cris/crisv10f.c: Ditto.
 690         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 691         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 692         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 693         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 694         case.
 695
 696         * cris/traps.c (TARGET_SYS_exit_group): Define.
 697         (cris_break_13_handler): Handle it like the exit for the last
 698         thread.
 699
 700         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 701         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 702         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 703         2.6.27.  Set machine field to the BFD printable name of the
 704         machine.
 705
 706         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 707         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 708         TARGET_MAP_DENYWRITE.
 709
 710         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 711         (TARGET_X_OK, TARGET_F_OK): Define.
 712         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 713
 714         * cris/semcrisv32f-switch.c: Regenerate.
 715
 716 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 717
 718         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 719         just a short CRIS-specific notice.  Tweak the wording for a
 720         failing architecture test.
 721
 722         * cris/traps.c (TARGET_SYS_writev): New macro.
 723         (is_mapped_only, cris_dump_map): New functions.
 724         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 725         and prot combinations and a non-zero page-offset.  If
 726         TARGET_MAP_FIXED, unmap pages before mapping them.
 727         <case TARGET_SYS_mprotect>: When checking, allow any length
 728         argument.  Don't actually do anything.
 729         <case TARGET_SYS_writev>: New case.
 730
 731         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 732         * cris/sim-if.c: Include elf-bfd.h.
 733         (struct progbounds): New members end_loadmem, start_nonloadmem.
 734         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 735         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 736         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 737         static.  Update head comment.  Set new struct progbounds members.
 738         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 739         variables.
 740         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 741         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 742         functions.
 743         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 744         handling to use auxv_entries.  Improve error message and checking
 745         for invalid programs.  Use new variable abfd for the program
 746         instead of for each access reaching into sd to get it.
 747         (sim_create_inferior): If non-zero, use interp_start_addr instead
 748         of the program start address.
 749         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 750         stale comment.  Always specify little-endian.
 751
 752 2008-07-29  Nick Clifton  <nickc@redhat.com>
 753
 754         * common/genmloop.sh: Add new parameter: -shell to specify the
 755         command interpreter to use to run the input file.  This is
 756         necessary because otherwise SHELL is taken from the user's
 757         environment, and not from the makefile that invoked this script
 758         and the user might not be running an sh-like shell.
 759         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 760         * fr30/Makefile.in: Likewise.
 761         * frv/Makefile.in: Likewise.
 762         * i960/Makefile.in: Likewise.
 763         * iq2000/Makefile.in: Likewise.
 764         * m32r/Makefile.in: Likewise.
 765
 766         * frv/mloop.in: Add missing start of line comment marker.
 767
 768 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 769
 770         * cris/configure: Regenerate to track ../common/common.m4 changes.
 771         * cris/config.in: Ditto.
 772
 773 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 774             Daniel Jacobowitz  <dan@codesourcery.com>
 775             Joseph Myers  <joseph@codesourcery.com>
 776
 777         * cris/configure: Regenerate.
 778
 779 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 780
 781         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 782
 783 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 784
 785         * MAINTAINERS: Add myself as maintainer of cr16 port.
 786
 787 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 788
 789         Add simulator for National cr16 processor.
 790         * cr16: New directory.
 791         * configure.ac: Add entry for National cr16.
 792         * configure: Regenerate.
 793
 794 2008-02-05  DJ Delorie  <dj@redhat.com>
 795
 796         * configure.ac (v850): V850 now has a testsuite.
 797         * configure (v850): Likewise.
 798
 799 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 800
 801         Updated copyright notices for most files.
 802
 803 2007-12-19  DJ Delorie  <dj@redhat.com>
 804
 805         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 806         cut_point.
 807
 808 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 809
 810         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 811         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 812         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 813         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 814         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 815         cris/semcrisv32f-switch.c: Regenerate.
 816
 817 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 818
 819         Switch the license of all files explicitly copyright the FSF
 820         to GPLv3.
 821
 822 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 823
 824         * Makefile.in: Add dummy "pdf" target.
 825
 826 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 827
 828         * cris/traps.c (dump_statistics): Change format for cycle numbers
 829         to %llu and cast parameters to unsigned long long.
 830
 831 2007-02-16  Thiemo Seufer  <ths@mips.com>
 832
 833         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 834
 835 2007-01-28  Manuel Lauss  <slauss@resi.at>
 836
 837         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 838         (sh-*-*): Change to sh*-*-*.
 839         * configure: Regenerated.
 840
 841 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 842
 843         Updated copyright notices for most files.
 844
 845 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 846
 847         * Makefile.in (autoconf-common autoheader-common): Only run
 848         autoheader on subdirs with a file config.in.
 849
 850         * configure.ac (common): Make the default "yes" for all targets
 851         with sim subdirs.
 852         * configure: Regenerate.
 853
 854         * Makefile.in (autoconf-common autoheader-common): In documented
 855         usage, say SHELL=/bin/sh.
 856         (.PHONY): Add autoheader-common.
 857
 858         * MAINTAINERS: Add self as authorized committer for *.
 859
 860 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 861             Hans-Peter Nilsson  <hp@axis.com>
 862
 863         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 864         (cris_unknown_syscall_action): Declare.
 865         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 866         (cris_options): Add cris-unknown-syscall option.
 867         (cris_option_handler): Correct comment about and error message for
 868         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 869         * cris/traps.c: Include stdarg.h
 870         (cris_unknown_syscall): New function.
 871         (cris_break_13_handler): Instead of sim_io_eprintf and
 872         sim_engine_halt, call cris_unknown_syscall to handle more or less
 873         unknown syscalls.  Adjust code as necessary to handle return
 874         value.
 875
 876 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 877
 878         * MAINTAINERS: Add Dave Brolley for sh64.
 879
 880 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 881
 882         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 883         (cris_pipe_empty): Correct initialization of "remaining".  Only
 884         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 885         are written.
 886
 887 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 888
 889         * cris/configure.ac: Check for limits.h and sys/param.h.
 890         * cris/configure, cris/config.in: Rebuild.
 891         * cris/traps.c (SIM_PATHMAX): New macro.
 892         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 893
 894 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 895
 896         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 897         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 898         * configure: Regenerated.
 899
 900 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 901
 902         * cris/configure: Regenerated.
 903
 904 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 905
 906         * cris/configure: Regenerated.
 907
 908 2006-05-05  Andreas Schwab  <schwab@suse.de>
 909
 910         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 911         * configure: Regenerate.
 912
 913         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 914         (CC_FOR_BUILD): Don't override.
 915         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 916
 917 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 918
 919         * MAINTAINERS: Add an "Authorized committers" section, and list
 920         DJ Delorie for v850.
 921
 922 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 923
 924         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 925
 926 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 927
 928         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 929         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 930         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 931         (all): Depend on rvdummy$(EXEEXT).
 932         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 933         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 934         default off.
 935         * cris/configure: Regenerate.
 936         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 937         (enum cris_interrupt_type, crisv10deliver_interrupt)
 938         (crisv32deliver_interrupt: New declarations.
 939         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 940         sim_events_tickn and set state-events member work_pending when it's
 941         time for the next event.
 942         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 943         interrupt-delivery function.
 944         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 945         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 946         * cris/devices.c: Include hw-device.h.
 947         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 948         (device_io_write_buffer): Only perform 0x900000xx-functions if
 949         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 950         call hw_io_write_buffer.  Add return 0 last in function.
 951         * cris/sim-if.c (cris_have_900000xxif): Now global.
 952         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 953         Force "-model" option, effectively.
 954         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 955         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 956
 957 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 958
 959         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 960         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 961         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 962
 963 2006-03-13  DJ Delorie  <dj@redhat.com>
 964
 965         * MAINTAINERS: Add self as m32c sim maintainer.
 966
 967 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 968
 969         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 970         mapping.
 971         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 972
 973 2006-01-23  Jim Blandy  <jimb@redhat.com>
 974
 975         Add simulator for Renesas M32C and M16C.
 976
 977         * m32c: New directory.
 978         * configure.ac: Add entry for Renesas M32C.
 979         * configure: Regenerate.
 980
 981 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 982
 983         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 984         cycle count for the current insn.
 985
 986 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 987
 988         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 989         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 990         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 991         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 992
 993 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 994
 995         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 996         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 997         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 998         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 999         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1000         cris/semcrisv32f-switch.c: Regenerate.
1001
1002 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
1003
1004         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1005         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1006         TARGET_O_WRONLY.
1007         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1008         F_GETFL on fd 0, 1 and 2.
1009
1010 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1011
1012         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1013         last_open_fd, last_open_flags.
1014         * cris/traps.c: Don't include targ-vals.h.
1015         (TARGET_O_ACCMODE): Define.
1016         (cris_break_13_handler): Set new _sim_cpu members.
1017         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1018         Rearrange code as switch.  Emit "unimplemented" abort for
1019         unimplemented fcntl calls.
1020
1021         * cris/traps.c (TARGET_SYS_stat): Define.
1022         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1023         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1024
1025 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1026
1027         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1028         low 32 bits are used after an unsigned long cast.
1029
1030 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1031
1032         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1033
1034 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1035
1036         * MAINTAINERS: Update my mail address, move myself to the
1037         "Past maintainers" section.
1038
1039 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1040
1041         * configure.ac: Add igen to v850 build.
1042         * configure: Regenerate.
1043
1044 2005-04-29  Paul Brook  <paul@codesourcery.com>
1045
1046         * common/callback.c (PIPE_BUF): Provide default definition.
1047         (os_lstat): Use stat if lstat is not available on the host.
1048         (os_ftruncate): Return EINVAL if not available on the host.
1049         (os_truncate): Ditto.
1050         * common/configure.ac: Check for lstat, truncate and ftruncate.
1051         * common/configure: Regenerate.
1052         * common/config.in: Regenerate.
1053
1054 2005-04-27  Paul Brook  <paul@codesourcery.com>
1055
1056         * common/Make-common.in: Add $(EXEEXT) to "run".
1057
1058 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1059
1060         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1061         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1062         implemented.  In call to create_map, pad length argument to 8k.
1063
1064 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1065
1066         * configure.ac: Add explicit sh64 case.
1067         * configure: Regenerate.
1068
1069 2005-03-30  Paul Brook  <paul@codesourcery.com>
1070
1071         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1072
1073 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1074
1075         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1076         include cgen-ops.h in decodev10.c and decodev32.c.
1077         * cris/sim-main.h: Don't include cgen-ops.h here.
1078         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1079         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1080         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1081         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1082         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1083         cris/semcrisv32f-switch.c: Regenerate.
1084
1085         * cris/traps.c (cris_break_13_handler) <case
1086         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1087         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1088
1089 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1090
1091         * cris/configure: Regenerate.
1092
1093 2005-02-28  Jim Blandy  <jimb@redhat.com>
1094
1095         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1096         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1097         Regenerated, after change to common/aclocal.m4.
1098
1099 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1100
1101         * iq2000: New target subdirectory.
1102         * configure.ac: Add iq2000 target.
1103         * configure: Regenerate.
1104
1105 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1106
1107         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1108         (realclean, install): Fail if subdir make failed.
1109
1110 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1111
1112         * cris: New directory, simulator for Axis Communications CRIS
1113         including CRIS v32, CGEN-based.
1114         * configure.ac: Add corresponding configury.
1115         * configure: Regenerate.
1116
1117 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1118
1119         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1120         common directory.  Remove sparc*-*-* from list.
1121
1122 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1123
1124         * Makefile.in (autoconf-common autoheader-common): Add --force to
1125         autoconf and autoheader.
1126         (autoconf-common autoheader-common)
1127         (autoconf-install autoheader-install): Check for configure.ac, not
1128         configure.in.
1129         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1130         * configure: Re-generate.
1131
1132 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1133
1134         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1135         correctly calls AC_CONFIG_SUBDIRS.
1136         * configure: Re-generate.
1137
1138 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1139
1140         * i960, h8500: Delete directory.
1141
1142 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1143
1144         * d30v, fr30, mn10200, z8k: Delete directory.
1145
1146 2004-03-10  Ben Elliston  <bje@gnu.org>
1147
1148         * MAINTAINERS: Update my mail address.
1149
1150 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1151
1152         * configure.in (mips*-*-*): Configure in testsuite.
1153         * configure: Regenerate.
1154
1155 2003-10-08  Dave Brolley  <brolley@redhat.com>
1156
1157         * configure.in: Move frv handling to alphabetically correct placement.
1158
1159 2003-09-03  Andreas Schwab  <schwab@suse.de>
1160
1161         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1162
1163 2003-08-29  Dave Brolley  <brolley@redhat.com>
1164
1165         * MAINTAINERS: Add myself as maintainer of the FRV port.
1166
1167 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1168             Dave Brolley  <brolley@redhat.com>
1169
1170         * frv/: New directory, simulator for the Fujitsu FRV.
1171         * configure.in: Add frv configury.
1172         * configure: Regenerate.
1173
1174 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1175
1176         * MAINTAINERS: Update my mail address.
1177
1178 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1179
1180         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1181         maintenance.  List igen and sh maintainers.  Mention that target
1182         and global maintainers pick up the slack.
1183
1184 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1185
1186         * configure.in: Add testsuite to extra_subdirs for sh.
1187         * configure: Regenerate.
1188
1189 2003-01-23  Nick Clifton  <nickc@redhat.com>
1190
1191         * Add sh2e support:
1192
1193 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1194
1195         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1196
1197 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1198
1199         * MAINTAINERS: Update my email address.
1200
1201 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1202
1203         * w65/: Delete directory.
1204
1205 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1206
1207         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1208         * configure: Re-generate.
1209
1210 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1211
1212         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1213         * configure: Re-generate.
1214
1215 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1216
1217         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1218         id, date and host to be overriden by NAME, ID, DATE and HOST
1219         respectfully.  Use ISO dates.
1220
1221 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1222
1223         * Makefile.in (ChangeLog): New makefile variable.
1224         * README-HACKING: Mention the ChangeLog makefile variable.
1225
1226 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1227
1228         * tic80/: Delete directory.
1229
1230 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1231
1232         * MAINTAINERS: Update my email address.
1233
1234 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1235
1236         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1237
1238 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1239
1240         * MAINTAINERS: Record self as a co-maintainer of just common/.
1241
1242 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1243
1244         * MAINTAINERS: Point to GDB files describing overall maintaince
1245         and check-in procedures.
1246
1247 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1248
1249         * MAINTAINERS: Add myself for ARM portions.
1250
1251 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1252
1253         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1254         * configure: Re-generate.
1255
1256 2001-02-16  Ben Elliston  <bje@redhat.com>
1257
1258         * MAINTAINERS: Add myself for common portions.
1259
1260 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1261
1262         * MAINTAINERS: Added self and Andrew for the mips sim.
1263
1264 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1265
1266         * MAINTAINERS: Added self and Andrew for the ppc sim.
1267
1268 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1269
1270         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1271         * m68hc11: New directory.
1272         * configure.in: Add.
1273         * configure: Regenerate.
1274
1275 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1276
1277         * tic80: New directory.
1278         * configure.in: Add configury.
1279         * configure: Regenerate.
1280
1281 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1282
1283         * configure.in (extra_subdirs): Add testsuite to strongarm
1284         directories.
1285         * configure: Regenerate.
1286
1287 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1288
1289         * MAINTAINERS: New file.  Blank.
1290
1291 1999-11-18  Ben Elliston  <bje@cygnus.com>
1292
1293         * configure.in: Require autoconf 2.13 and remove obsolete
1294         invocation of AC_C_CROSS.
1295         * configure: Regenerate.
1296
1297 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1298
1299         * configure.in: Configure the testsuite directory for thumb.
1300         * configure: Regenerate.
1301
1302 1999-07-16  Ben Elliston  <bje@cygnus.com>
1303
1304         * configure.in: Configure the testsuite directory for arm.
1305         * configure: Regenerate.
1306
1307 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1308
1309         * configure.in: Add support for MCore target.
1310         * configure: Regenerate.
1311
1312 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1313
1314         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1315         RUNTEST instead of commenting out, fixes portability problem.
1316
1317 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1318
1319         * configure.in: Add support for StrongARM target.
1320         * configure: Regenerate.
1321
1322 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1323
1324         * configure.in: Require autoconf 2.12.1 or higher.
1325
1326 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1327
1328         * configure.in (i960-*-*): Add.
1329         * configure: Rebuild.
1330
1331 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1332
1333         * configure.in: Added case for fr30-*-*.
1334         * configure: Regenerated.
1335
1336 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1337
1338         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1339         to allow successful operation on Windows.
1340
1341 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1342
1343         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1344         check can be invoked recursively.
1345
1346 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1347
1348         * configure.in: Build simulator on sparclite and sparc86x targets.
1349         * configure: Regenerate.
1350
1351 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1352
1353         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1354         to autoconf and autoheader.
1355
1356 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1357
1358         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1359         ../common' to autoconf and autoheader.  Unconditionally run
1360         autoconf in every subdir.
1361         (autoconf-changelog autoheader-changelog): Unconditionally run
1362         commands in every subdir.
1363         (autoconf-install autoheader-install): Likewise.
1364
1365 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1366
1367         * Makefile.in:  Get SHELL from configure.
1368         * (FLAGS_TO_PASS):  Pass down SHELL.
1369         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1370         NT native builds.
1371
1372 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1373
1374         * configure.in (extra_subdirs): Enable igen for mn10300.
1375         * configure: Re-generate.
1376
1377 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1378
1379         * configure.in (extra_subdirs): Add support for thumb target.
1380
1381         * configure (extra_subdirs): Add support for thumb target.
1382
1383 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1384
1385         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1386         target.
1387         * configure: Regenerate.
1388
1389 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1390
1391         * configure.in (extra_subdirs): v850ea needs igen.
1392         * configure: Re-generate.
1393
1394 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1395
1396         * configure.in (testdir): When a testsuite directory, add that to
1397         the list of confdirs.
1398
1399 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1400
1401         * configure.in (extra_subdirs): Enable igen ready for V850.
1402
1403 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1404
1405         * configure.in (w65-*-*, only_if_enabled): Set.
1406         * configure: Re-generate.
1407
1408 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1409
1410         * configure.in (sparc*-*-*, only_if_enabled): Set
1411         only_if_enabled=yes.  Check only_if_enabled before enabling a
1412         simulator.
1413         * configure: Regenerate.
1414
1415 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1416
1417         * configure.in (extra_subdirs): Add v850e target.
1418
1419 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1420
1421         * configure.in (extra_subdirs): Add v850ea target.
1422
1423 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1424
1425         * configure.in (sparc*-*-*): Don't build erc32.
1426         * configure: Regenerate.
1427
1428 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1429
1430         * configure.in (m32r-*-*): New target.
1431         * configure: Regenerate.
1432
1433         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1434
1435 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1436
1437         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1438         thought that .NOEXPORT was the default target.
1439
1440 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1441
1442         * Makefile.in (clean mostlyclean): Restore targets accidentally
1443         deleted in earlier change.
1444
1445 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1446
1447         * Makefile.in (autoheader-common, autoheader-changelog,
1448         autoheader-install): Perform autoheader in addition to autoconf.
1449
1450 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1451
1452         * Makefile.in (autoconf-install): New target.
1453         (autoconf-changelog): Try different way to obtain user name.
1454
1455 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1456
1457         * Makefile.in (autoconf-changelog): New target, update
1458         ChangeLog for all subdirectories - normally used after
1459         autoconf-common target.
1460
1461 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1462
1463         * configure.in (extra_subdirs): Include testsuite for d30v.
1464         * configure: Regenerate.
1465
1466         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1467         ../gdb/Makefile.in
1468         (check): New rules - drive the testsuite.
1469
1470 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1471
1472         * configure.in: Add mn10200 configure lines accidentally
1473         removed.
1474         * configure: Regenerated.
1475
1476 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1477
1478         * configure.in (extra_subdirs): Generalize common sub directory
1479         into a list.
1480         (extra_subdirs): For d30v add igen to the list to be built.
1481
1482 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1483
1484         * configure.in (d30v): New target.
1485         * configure: Regenerated.
1486
1487 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1488
1489         * configure.in: Don't require GCC to build the mn10200
1490         simulator anymore.
1491         * configure: Rebuilt.
1492
1493 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1494
1495         * configure.in: Don't configure any subdirs if no simulator
1496         is being built.  Don't use erc32 for sparc64.
1497         * configure: Regenerated.
1498
1499 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1500
1501         * Makefile.in (autoconf-common): New target.
1502         * configure.in: Do configure common.
1503         * configure: Regenerated.
1504
1505 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1506
1507         * configure configure.in:  Don't configure common anymore.  Files
1508         from common are now built in the individual simualtor directories.
1509         This fixes problems with the WinGDB build procedure.
1510
1511 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1512
1513         * configure: Enable the mn10200 simulator.
1514
1515 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1516
1517         * configure.in (configdirs): Add common.
1518         * configure: Regenerated.
1519
1520 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1521
1522         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1523         system V based targets.
1524         * configure: Regenerate.
1525
1526 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1527
1528         * configure.in (--enable-sim-powerpc): Delete.
1529         (--enable-sim): Add.
1530         * configure: Regenerated.
1531
1532 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1533
1534         * configure.in: Only build the V850 simulator if
1535         we are using gcc.
1536         * configure: Rebuild.
1537
1538 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1539
1540         * configure.in: Do build erc32 for DOS and Windows hosts.
1541         * configure: Rebuild.
1542
1543 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1544
1545         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1546         be inherited from the parent.  Remove INSTALL_XFORM and
1547         INSTALL_XFORM1.  Make INSTALL be set from configure.
1548
1549 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1550
1551         * configure.in: Only build the MIPS simulator if we are using
1552         gcc.
1553         * configure: Rebuild.
1554
1555 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1556
1557         * configure.in (v850-*-*): Added V850 simulator.
1558
1559 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1560
1561         * configure.in (d10v-*-*): Added D10V simulator.
1562
1563 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1564
1565         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1566         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1567         (docdir): Removed.
1568         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1569         (AC_PROG_INSTALL): Added.
1570         * configure: Rebuilt.
1571
1572 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1573
1574         * configure.in: Only configure erc32 if using gcc.
1575         * configure: Rebuild.
1576
1577 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1578
1579         * configure.in (sim_target): Build PowerPC simulator for powerpc
1580         System V.4, Solaris, and Elf targets.
1581         * configure: Regenerate with autoconf 2.10.
1582
1583 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1584
1585         * configure.in: Only built erc32 simulator on Unix hosts as it
1586         uses pseudo ttys.
1587         * configure: Regenerated with autoconf 2.8.
1588
1589 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1590
1591         * erc32: Sparc simulator from the ESA.
1592
1593 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1594
1595         From: Miles Bader  <miles@gnu.ai.mit.edu>
1596         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1597         * configure: Regenerate using autoconf.
1598
1599 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1600
1601         * Makefile.in (install): Fix typo.
1602
1603 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1604
1605         * configure: Regenerate with autoconf 2.7.
1606
1607         * Makefile.in (all): Simplify.
1608         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1609         as in the all target.
1610         (distclean, maintainer-clean, realclean): Likewise.
1611         (install): Likewise.
1612
1613 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1614
1615         * Makefile.in (all): Remove extra '\' char from shell script.
1616
1617 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1618
1619         * Makefile.in (all): Avoid a for loop with zero elements, even if
1620         the loop will not be executed because of an if statement.
1621
1622 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1623
1624         * Makefile.in (install): Add missing semicolon in "fi \".
1625
1626 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1627
1628         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1629         defaults from configure.
1630
1631         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1632         configure defaults.
1633         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1634         if either --enable-sim-powerpc is used, or the host compiler is
1635         GCC.
1636
1637 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1638
1639         * configure.in (mips*-*-*): Added "mips" simulator target.
1640         * configure: Re-generated.
1641
1642 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1643
1644         * Makefile.in (BISON): Remove macro.
1645         (FLAGS_TO_PASS): Remove BISON.
1646
1647 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1648
1649         * configure.in:  Explicitly `exit 0' for broken shells.
1650         * configure:  Rebuilt.
1651
1652 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1653
1654         * common/run.c (main): Initialize the callbacks.
1655
1656 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1657
1658         * Makefile.in (maintainer-clean): New synonym for realclean.
1659
1660 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1661
1662         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1663         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1664
1665 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1666
1667         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1668         <cagney@highland.com.au>.
1669         * configure: Regnerate from configure.in.
1670
1671 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1672
1673         * Update all FSF addresses except those in COPYING* files.
1674
1675 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1676
1677         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1678         submakes either default or passed in value.
1679
1680 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1681
1682         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1683           install): Changed targets so that they descend all
1684           subdirectories in $(SUBDIRS).
1685           (*-all, *-clean, *-install): Removed targets.
1686
1687         * configure.in: Don't bother with target makefile fragments, they
1688           are no longer needed.
1689         * configure: regenerated.
1690
1691         * Makefile.in, configure.in: converted to autoconf.
1692         * configure: New file, generated with autconf 2.4.
1693
1694 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1695
1696         * Makefile.in: Support ARM.
1697         * configure.in: Ditto.
1698
1699 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1700
1701         * Makefile.in: Support W65.
1702         * configure.in: Ditto.
1703
1704 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1705
1706         * Makefile.in: Add TAGS target.
1707
1708 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1709
1710         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1711           install-h8300, clean-h8300, all-h8500, install-h8500,
1712           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1713           recursion lines.
1714
1715 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1716
1717         * Makefile.in: remove endian.h trace from h8500
1718
1719 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1720
1721         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1722
1723 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1724
1725         * Makefile.in: make all of the all-* target (except all-nothing)
1726         depend on endian.h, so that if we're not building a simulator, we
1727         don't built endian
1728
1729 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1730
1731         * Makefile.in (check, installcheck): Added dummy targets.
1732
1733 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1734
1735         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1736         explicitly make it, since some makes apparently don't work with
1737         VPATH and .c to executable rules (SunOS make for example).
1738
1739 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1740
1741         * Makefile.in (endian): Add explicit rule for broken makes.
1742
1743 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1744
1745         * Makefile.in (info, install-info): New targets.
1746         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1747         level Makefile.
1748
1749 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1750
1751         * Makefile.in (endian.h): build endian.h via a temporary file so
1752           that we don't leave an incomplete file lying around on
1753           interrupted builds.
1754           (clean): remove endian, e.h, and endian.h.
1755
1756 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1757
1758         * Makefile.in, configure.in: if target isn't supported, build a
1759         harmless makefile.
1760
1761