1 2019-09-20 Alan Modra <amodra@gmail.com>
3 * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
5 2019-09-18 Alan Modra <amodra@gmail.com>
7 * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
8 * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
9 * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
10 * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
11 * rx/trace.c: Update throughout for bfd section macro changes.
13 2019-06-13 Stafford Horne <shorne@gmail.com>
15 * or1k/cpu.c: Regenerate.
16 * or1k/cpu.h: Regenerate.
17 * or1k/decode.c: Regenerate.
18 * or1k/decode.h: Regenerate.
19 * or1k/model.c: Regenerate.
20 * or1k/sem-switch.c: Regenerate.
21 * or1k/sem.c: Regenerate.
23 2019-02-28 Joel Brobecker <brobecker@adacore.com>
25 * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
27 2019-02-13 Simon Marchi <simon.marchi@ericsson.com>
29 * MAINTAINERS: Add Andrew Burgess as global maintainer.
31 2019-01-03 Pavel I. Kryukov <kryukov@frtk.ru>
33 * sim-base.h: Add 'extern C' if header is compiled with C++.
35 2018-12-06 Andrew Burgess <andrew.burgess@embecosm.com>
37 * common/acinclude.m4 (enable-cgen-maint): Support passing path to
39 * cris/configure: Regenerate.
40 * frv/configure: Regenerate.
41 * iq2000/configure: Regenerate.
42 * lm32/configure: Regenerate.
43 * m32r/configure: Regenerate.
44 * or1k/configure: Regenerate.
45 * sh64/configure: Regenerate.
47 2018-10-05 Stafford Horne <shorne@gmail.com>
49 * or1k/cpu.h: Regenerate.
50 * or1k/decode.c: Regenerate.
51 * or1k/decode.h: Regenerate.
52 * or1k/model.c: Regenerate.
53 * or1k/sem-switch.c: Regenerate.
54 * or1k/sem.c: Regenerate:
56 2018-07-20 Maciej W. Rozycki <macro@mips.com>
58 * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
61 2018-07-19 DJ Delorie <dj@redhat.com>
63 * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
65 2018-07-14 Stafford Horne <shorne@gmail.com>
67 * MAINTAINERS (or1k): Add myself as or1k maintainer.
69 2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
71 * All configure.ac: Remove AC_PREREQ.
72 * All configure: Re-generate.
74 2018-01-22 Maciej W. Rozycki <macro@mips.com>
76 * MAINTAINERS: Update my company e-mail address.
78 2017-12-12 Stafford Horne <shorne@gmail.com>
79 Peter Gavin <pgavin@gmail.com>
81 * configure: Regenerated.
82 * or1k/aclocal.m4: Generated.
83 * or1k/config.in: Generated.
84 * or1k/configure: Generated.
86 2017-12-12 Stafford Horne <shorne@gmail.com>
87 Peter Gavin <pgavin@gmail.com>
89 * or1k/arch.c: Generated.
90 * or1k/arch.h: Generated.
91 * or1k/cpu.c: Generated.
92 * or1k/cpu.h: Generated.
93 * or1k/cpuall.h: Generated.
94 * or1k/decode.c: Generated.
95 * or1k/decode.h: Generated.
96 * or1k/model.c: Generated.
97 * or1k/sem-switch.c: Generated.
98 * or1k/sem.c: Generated.
100 2017-12-12 Stafford Horne <shorne@gmail.com>
101 Peter Gavin <pgavin@gmail.com>
103 * configure.tgt: Add or1k sim.
104 * or1k/README: New file.
105 * or1k/Makefile.in: New file.
106 * or1k/configure.ac: New file.
107 * or1k/mloop.in: New file.
108 * or1k/or1k-sim.h: New file.
109 * or1k/or1k.c: New file.
110 * or1k/sim-if.c: New file.
111 * or1k/sim-main.h: New file.
112 * or1k/traps.c: New file.
114 2017-11-01 James Bowman <james.bowman@ftdichip.com>
116 * ft32/interp.c (step_once): Add ft32 shortcode decoder.
118 2017-10-12 James Bowman <james.bowman@ftdichip.com>
120 * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
122 2017-10-12 James Bowman <james.bowman@ftdichip.com>
124 * MAINTAINERS (ft32): Add myself.
126 2017-10-03 Jim Wilson <wilson@tuliptree.org>
128 * MAINTAINERS (aarch64): Update my email address.
130 2017-09-06 John Baldwin <jhb@FreeBSD.org>
132 * configure.ac: Honor existing CC_FOR_BUILD in environment.
133 * configure: Regenerate.
135 2017-02-14 Jim Wilson <jim.wilson@linaro.org>
137 * MAINTAINTERS (aarch64): Add myself.
139 2016-12-14 Maciej W. Rozycki <macro@imgtec.com>
141 * MAINTAINERS (Maintainers for particular sims): Add myself as
144 2016-02-03 Maciej W. Rozycki <macro@linux-mips.org>
146 * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
148 2016-01-09 Mike Frysinger <vapier@gentoo.org>
150 * configure.ac: Delete sim_common check and the
151 AC_CONFIG_SUBDIRS(common) call.
152 * configure: Regenerate.
153 * configure.tgt (sim_common): Delete the variable.
155 2016-01-09 Mike Frysinger <vapier@gentoo.org>
157 * .gitignore: Delete /common/cconfig.h entry.
159 2016-01-05 Nick Clifton <nickc@redhat.com>
161 * MAINTAINERS: Add myself as AArch64 sim maintainer.
163 2015-12-09 Tristan Gingold <gingold@adacore.com>
165 * aarch64/simulator.c: Remove syscall.h include.
167 2015-12-26 Mike Frysinger <vapier@gentoo.org>
169 * README-HACKING: Delete mention of tconfig.h.
171 2015-11-24 Nick Clifton <nickc@redhat.com>
173 * configure.tgt: Add aarch64 entry.
174 * configure: Regenerate.
176 2015-06-23 Mike Frysinger <vapier@gentoo.org>
178 * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
179 * configure: Regenerate.
181 2015-06-12 Mike Frysinger <vapier@gentoo.org>
183 * README-HACKING: Change configure.in to configure.ac.
185 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
187 * arm/configure: Regenerated.
188 * avr/configure: Likewise.
189 * bfin/configure: Likewise.
190 * common/configure: Likewise.
191 * cr16/configure: Likewise.
192 * cris/configure: Likewise.
193 * d10v/configure: Likewise.
194 * erc32/configure: Likewise.
195 * frv/configure: Likewise.
196 * ft32/configure: Likewise.
197 * h8300/configure: Likewise.
198 * igen/configure: Likewise.
199 * iq2000/configure: Likewise.
200 * lm32/configure: Likewise.
201 * m32c/configure: Likewise.
202 * m32r/configure: Likewise.
203 * m68hc11/configure: Likewise.
204 * mcore/configure: Likewise.
205 * microblaze/configure: Likewise.
206 * mips/configure: Likewise.
207 * mn10300/configure: Likewise.
208 * moxie/configure: Likewise.
209 * msp430/configure: Likewise.
210 * ppc/configure: Likewise.
211 * rl78/configure: Likewise.
212 * rx/configure: Likewise.
213 * sh/configure: Likewise.
214 * sh64/configure: Likewise.
215 * v850/configure: Likewise.
217 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
219 * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
220 (BFD_LIB): Remove $(ZLIB).
221 (CONFIG_LIBS): Add $(ZLIB).
222 * ppc/Makefile.in (ZLIBINC): Removed.
223 (INCLUDES): Remove $(ZLIBINC).
224 (BFD_LIB): Remove $(ZLIB).
226 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
228 * arm/configure: Regenerated.
229 * avr/configure: Likewise.
230 * bfin/configure: Likewise.
231 * common/configure: Likewise.
232 * cr16/configure: Likewise.
233 * cris/configure: Likewise.
234 * d10v/configure: Likewise.
235 * erc32/configure: Likewise.
236 * frv/configure: Likewise.
237 * ft32/configure: Likewise.
238 * h8300/configure: Likewise.
239 * igen/configure: Likewise.
240 * iq2000/configure: Likewise.
241 * lm32/configure: Likewise.
242 * m32c/configure: Likewise.
243 * m32r/configure: Likewise.
244 * m68hc11/configure: Likewise.
245 * mcore/configure: Likewise.
246 * microblaze/configure: Likewise.
247 * mips/configure: Likewise.
248 * mn10300/configure: Likewise.
249 * moxie/configure: Likewise.
250 * msp430/configure: Likewise.
251 * ppc/configure: Likewise.
252 * rl78/configure: Likewise.
253 * rx/configure: Likewise.
254 * sh/configure: Likewise.
255 * sh64/configure: Likewise.
256 * v850/configure: Likewise.
258 2015-03-29 Mike Frysinger <vapier@gentoo.org>
260 * configure: Regenerate.
261 * configure.ac: Delete sim_testsuite check and config in testsuite.
262 * configure.tgt (sim_testsuite): Delete everywhere.
264 2015-03-28 Mike Frysinger <vapier@gentoo.org>
266 * configure: Regenerate.
267 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
269 2015-03-28 James Bowman <james.bowman@ftdichip.com>
271 * configure.tgt: Add FT32 entry.
272 * configure: Regenerate.
274 2015-03-16 Mike Frysinger <vapier@gentoo.org>
276 * .gitignore: Delete tconfig.h.
277 * README-HACKING: Change tconfig.in to tconfig.h.
279 2014-03-12 Nick Clifton <nickc@redhat.com>
281 * MAINTAINERS: Add myself as the maintainer for the MSP430.
283 2014-03-10 Mike Frysinger <vapier@gentoo.org>
285 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
286 * configure: Regenerate.
288 2014-01-06 Tom Tromey <tromey@redhat.com>
290 * common/cgen-trace.c: Don't use old VA_* macros.
291 * common/sim-load.c (xprintf): Likewise.
292 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
294 2014-01-06 Tom Tromey <tromey@redhat.com>
296 * README-HACKING: Don't use PARAMS.
297 * arm/wrapper.c: Don't use PARAMS.
298 * bfin/sim-main.h: Don't use PARAMS.
299 * common/callback.c: Don't use PARAMS.
300 * common/cgen-trace.c: Don't use PARAMS.
301 * common/run-sim.h: Don't use PARAMS.
302 * common/run.c: Don't use PARAMS.
303 * common/sim-base.h: Don't use PARAMS.
304 * common/sim-load.c: Don't use PARAMS.
305 * common/sim-options.h: Don't use PARAMS.
306 * common/sim-trace.c: Don't use PARAMS.
307 * common/sim-trace.h: Don't use PARAMS.
308 * common/sim-utils.h: Don't use PARAMS.
309 * cr16/cr16_sim.h: Don't use PARAMS.
310 * cr16/gencode.c: Don't use PARAMS.
311 * cr16/interp.c: Don't use PARAMS.
312 * cr16/simops.c: Don't use PARAMS.
313 * d10v/d10v_sim.h: Don't use PARAMS.
314 * d10v/gencode.c: Don't use PARAMS.
315 * d10v/interp.c: Don't use PARAMS.
316 * d10v/simops.c: Don't use PARAMS.
317 * erc32/erc32.c: Don't use PARAMS.
318 * erc32/exec.c: Don't use PARAMS.
319 * erc32/float.c: Don't use PARAMS.
320 * erc32/func.c: Don't use PARAMS.
321 * erc32/sis.c: Don't use PARAMS.
322 * erc32/sis.h: Don't use PARAMS.
323 * mips/interp.c: Don't use PARAMS.
324 * mips/sim-main.h: Don't use PARAMS.
325 * sh/interp.c: Don't use PARAMS.
326 * v850/sim-main.h: Don't use PARAMS.
327 * v850/v850_sim.h: Don't use PARAMS.
329 2013-11-07 Will Newton <will.newton@linaro.org>
332 * arm/wrapper.c (sim_create_inferior): Call init before
335 2013-11-07 Will Newton <will.newton@linaro.org>
338 * arm/wrapper.c (sim_create_inferior): Avoid calling
339 bfd_get_mach with a NULL bfd.
341 2013-06-21 Nick Clifton <nickc@redhat.com>
343 * msp430: New Directory.
344 * configure.tgt: Add it.
345 * configure: Regenerate.
347 2013-03-15 Steve Ellcey <sellcey@mips.com>
349 * arm/wrapper.c (sim_complete_command): Make char arguments const.
350 * avr/interp.c (sim_complete_command): Ditto.
351 * common/sim-options.c (sim_complete_command): Ditto.
352 * cr16/interp.c (sim_complete_command): Ditto.
353 * erc32/interf.c (sim_complete_command): Ditto.
354 * m32c/gdb-if.c (sim_complete_command): Ditto.
355 * microblaze/interp.c (sim_complete_command): Ditto.
356 * ppc/sim_calls.c (sim_complete_command): Ditto.
357 * rl78/gdb-if.c (sim_complete_command): Ditto.
358 * rx/gdb-if.c (sim_complete_command): Ditto.
359 * sh/interp.c (sim_complete_command): Ditto.
361 2013-01-01 Joel Brobecker <brobecker@adacore.com>
363 Update year range in copyright notice of all files.
365 2012-12-19 Joel Brobecker <brobecker@adacore.com>
367 Update old contact info in GPL license notices.
369 2012-12-19 Joel Brobecker <brobecker@adacore.com>
371 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
373 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
375 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
377 * common/acinclude.m4: Define lt_cv_dlopen_libs.
378 * arm/configure: Regenerate.
379 * avr/configure: Regenerate.
380 * bfin/configure: Regenerate.
381 * common/configure: Regenerate.
382 * cr16/configure: Regenerate.
383 * cris/configure: Regenerate.
384 * d10v/configure: Regenerate.
385 * erc32/configure: Regenerate.
386 * frv/configure: Regenerate.
387 * h8300/configure: Regenerate.
388 * igen/configure: Regenerate.
389 * iq2000/configure: Regenerate.
390 * lm32/configure: Regenerate.
391 * m32c/configure: Regenerate.
392 * m32r/configure: Regenerate.
393 * m68hc11/configure: Regenerate.
394 * mcore/configure: Regenerate.
395 * microblaze/configure: Regenerate.
396 * mips/configure: Regenerate.
397 * mn10300/configure: Regenerate.
398 * moxie/configure: Regenerate.
399 * ppc/configure: Regenerate.
400 * rl78/configure: Regenerate.
401 * rx/configure: Regenerate.
402 * sh/configure: Regenerate.
403 * sh64/configure: Regenerate.
404 * testsuite/configure: Regenerate.
405 * v850/configure: Regenerate.
407 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
409 * MAINTAINERS: Update my email address.
411 2012-09-24 Steve Ellcey <sellcey@mips.com>
413 * mips/basic.exp: Add mips*-mti-elf* target.
414 * configure.ac: Add mips*-mti-elf* target.
415 * configure: Regenerate.
417 2012-06-15 Joel Brobecker <brobecker@adacore.com>
419 * configure: Regenerate.
421 2012-06-06 Michael Eager <eager@eagercon.com>
423 * microblaze/interp.c (config.h): Add #include.
425 2011-11-29 Joel Brobecker <brobecker@adacore.com>
427 * MAINTAINERS (Global Maintainers): New section. Add Mike
430 2011-11-28 DJ Delorie <dj@redhat.com>
432 * configure.tgt: Add rl78 support.
433 * configure: Regenerate.
434 * rl78: New directory.
435 * MAINTAINERS: Add myself as RL78 maintainer.
437 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
439 * MAINTAINERS: Remove Thiemo Seufer.
441 2011-06-04 Mike Frysinger <vapier@gentoo.org>
443 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
444 * configure: Regenerate.
446 2011-05-04 Joseph Myers <joseph@codesourcery.com>
448 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
450 * configure: Regenerate.
452 2011-03-05 Mike Frysinger <vapier@gentoo.org>
454 * MAINTAINERS: Add bfin entry.
455 * configure.tgt (bfin-*-*): Handle bfin targets.
456 * configure: Regenerate.
458 2011-01-05 Mike Frysinger <vapier@gentoo.org>
460 * .gitignore: Add /*/hw-config.h.
462 2010-12-23 Mike Frysinger <vapier@gentoo.org>
464 * .gitignore: New file.
466 2010-07-28 DJ Delorie <dj@redhat.com>
468 * MAINTAINERS: Add self as RX maintainer. Sort list.
470 2010-06-08 Nick Clifton <nickc@redhat.com>
472 * reg.c (set_oszc): Use unsigned int for the mask.
473 (set_szc, set_osz, set_sz): Likewise.
475 2010-04-26 Mike Frysinger <vapier@gentoo.org>
477 * configure.ac: Target logic moved out to and included from ...
478 * configure.tgt: ... this new file.
479 * configure: Regenerated.
481 2010-04-12 Mike Frysinger <vapier@gentoo.org>
483 * README-HACKING: Add more sections.
485 2010-02-11 Doug Evans <dje@sebabeach.org>
487 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
488 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
489 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
490 * cris/semcrisv32f-switch.c: Regenerate.
492 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
494 * avr/configure: Regenerate.
495 * cris/configure: Regenerate.
496 * microblaze/configure: Regenerate.
498 2010-01-02 Doug Evans <dje@sebabeach.org>
500 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
501 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
502 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
503 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
504 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
505 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
507 2010-01-01 Doug Evans <dje@sebabeach.org>
509 * cris/mloop.in: Fix copyright year update snafu.
511 2009-11-24 Joel Brobecker <brobecker@adacore.com>
513 * common/aclocal.m4: Add include of ../../config/zlib.m4.
514 * common/common.m4: Use AM_ZLIB to check for zlib support.
515 * ppc/configure.ac: Likewise.
516 * arm/configure, avr/configure, common/configure, cr16/configure,
517 cris/configure, d10v/configure, erc32/configure, frv/configure,
518 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
519 m32r/configure, m68hc11/configure, mcore/configure,
520 microblaze/configure, mips/configure, mn10300/configure,
521 moxie/configure, ppc/configure, sh/configure, sh64/configure,
522 v850/configure: Regenerate.
524 2009-11-24 DJ Delorie <dj@redhat.com>
527 * configure.ac: Add entry for Renesas RX.
528 * configure: Regenerate.
530 2009-11-22 Doug Evans <dje@sebabeach.org>
532 * cris/cpuall.h: Regenerate.
533 * cris/cpuv10.h: Regenerate.
534 * cris/cpuv32.h: Regenerate.
535 * cris/decodev10.c: Regenerate.
536 * cris/decodev10.h: Regenerate.
537 * cris/decodev32.c: Regenerate.
538 * cris/decodev32.h: Regenerate.
540 2009-11-12 Tristan Gingold <gingold@adacore.com>
542 * avr/interp.c (sim_write): Allow byte access.
545 2009-11-12 Tristan Gingold <gingold@adacore.com>
547 * avr/interp.c (sim_load): Clear memory before loading.
549 2009-11-09 Tristan Gingold <gingold@adacore.com>
551 * avr/interp.c (sim_resume): Fix typo for OP_ret.
553 2009-10-23 Doug Evans <dje@sebabeach.org>
555 * cris/arch.c: Regenerate.
556 * cris/arch.h: Regenerate.
557 * cris/cpuall.h: Regenerate.
558 * cris/cpuv10.c: Regenerate.
559 * cris/cpuv10.h: Regenerate.
560 * cris/cpuv32.c: Regenerate.
561 * cris/cpuv32.h: Regenerate.
562 * cris/cris-desc.c: Regenerate.
563 * cris/cris-desc.h: Regenerate.
564 * cris/cris-opc.h: Regenerate.
565 * cris/decodev10.c: Regenerate.
566 * cris/decodev10.h: Regenerate.
567 * cris/decodev32.c: Regenerate.
568 * cris/decodev32.h: Regenerate.
569 * cris/modelv10.c: Regenerate.
570 * cris/modelv32.c: Regenerate.
571 * cris/semcrisv10f-switch.c: Regenerate.
572 * cris/semcrisv32f-switch.c: Regenerate.
574 2009-10-22 Tristan Gingold <gingold@adacore.com>
576 * avr/interp.c (sim_stop): Return 1.
578 2009-10-16 Doug Evans <dje@sebabeach.org>
580 * MAINTAINERS: Add myself as m32r maintainer.
582 2009-10-15 Michael Egaer <eager@eagercon.com>
584 * MAINTAINERS: Add self as MicroBlaze maintainer.
586 2009-10-14 Ben Elliston <bje@gnu.org>
588 * MAINTAINERS (common): Move myself to "past maintainers" section.
590 2009-10-06 Michael Eager <eager@eagercon.com>
592 * microblaze/interp.c: Add include microblaze-dis.h.
594 2009-09-23 Michael Eager <eager@eagercon.com>
596 * configure: Add microblaze-*.* (not regenerated).
597 * configure.ac: Likewise.
598 * microblaze/config.in: New.
599 * microblaze/configure: Generate.
600 * microblaze/configure.ac: New.
601 * microblaze/interp.c: New.
602 * microblaze/Makefile.in: New.
603 * microblaze/microblaze.h: New.
604 * microblaze/microblaze.isa: New.
605 * microblaze/sim-main.h: New.
606 * microblaze/sysdep.h: New.
608 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
610 * avr/config.in: Regenerate.
611 * avr/configure: Likewise.
612 * configure: Likewise.
613 * cris/config.in: Likewise.
614 * cris/configure: Likewise.
616 * configure.ac: m4_include toplevel config/override.m4.
617 * configure: Regenerate.
618 * avr/configure: Regenerate.
619 * cris/configure: Regenerate.
621 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
623 * Makefile.in (datarootdir): New variable.
625 2009-05-18 Jon Beniston <jon@beniston.com>
627 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
628 * configure.ac: Add lm32 target.
629 * lm32: New directory.
631 2009-05-11 Andrew Cagney <cagney@gnu.org>
633 * MAINTAINERS: Orphan ppc.
635 2009-05-08 Kevin Buettner <kevinb@redhat.com>
637 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
638 m32c_signal_to_target. Change signal return values from SIGILL,
639 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
640 TARGET_SIGNAL_SEGV, etc. Fix all callers.
642 2009-04-30 Anthony Green <green@moxielogic.com>
644 * MAINTAINERS: Add myself for the moxie port.
645 * moxie: New directory.
646 * configure.ac: Add entry for moxie.
647 * configure: Regenerate.
649 2009-04-27 Tristan Gingold <gingold@adacore.com>
651 * avr: New directory.
652 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
653 * avr/config.in: New file, generated by autoheader.
654 * avr/configure: New file generated by autoconf.
655 * configure.ac: Add avr.
656 * configure: Regenerated.
658 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
660 * Makefile.in: Add dummy install-pdf, html, and
661 install-html targets.
663 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
665 * cris/sim-if.c: Include errno.h.
666 (cris_start_address, cris_program_offset): New variables.
667 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
669 (cris_options): New options --cris-program-offset and
670 --cris-start-address.
671 (cris_option_handler): Handle new options.
672 (cris_program_offset_write, cris_set_section_offset_iterator)
673 (cris_offset_sections, cris_offset_sections): New functions.
674 (sim_load): Use cris_program_offset_write as function argument to
675 cris_load_elf_file, not sim_write.
676 (struct offsetinfo): New struct.
677 (cris_handle_interpreter): Fix typo in comment.
678 (sim_open): Call cris_offset_sections as soon as the bfd of the
679 infile is available. Gate bfd validity checks on abfd non-NULL.
680 (sim_create_inferior): Let cris_start_address when != -1 override
681 other start-address choices.
683 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
685 * cris/traps.c (abort): Define to call sim_io_error.
686 (create_map): Make -1 imply a non-fixed address, not 0. All
687 callers changed. Only prefer the next higher unmapped address if
688 the last mapped address is no less than 0x40000000. Check that
689 the address to be mapped is not already mapped. Update head
691 (unmap_pages): Don't call abort when recursive call fails, just
692 note and return an error if a page in the range couldn't be unmapped.
693 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
694 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
695 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
696 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
697 don't abort on page not being mapped. Handle non-anon filemap
698 with length padded to pagesize.
700 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
702 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
703 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
704 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
705 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
706 (TARGET_AT_CLKTCK): Remove redundant macros.
707 (AUX_ENT): Adjust to use standard ELF AT_* macros.
708 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
710 (sim_open): Also pass AT_SECURE.
712 * cris/sim-main.h (struct _sim_cpu): New member
713 set_target_thread_data.
714 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
715 * cris/crisv10f.c: Ditto.
716 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
717 (MY (f_specific_init)): Set new _sim_cpu member to new function.
718 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
719 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
722 * cris/traps.c (TARGET_SYS_exit_group): Define.
723 (cris_break_13_handler): Handle it like the exit for the last
726 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
727 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
728 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
729 2.6.27. Set machine field to the BFD printable name of the
732 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
733 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
734 TARGET_MAP_DENYWRITE.
736 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
737 (TARGET_X_OK, TARGET_F_OK): Define.
738 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
740 * cris/semcrisv32f-switch.c: Regenerate.
742 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
744 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
745 just a short CRIS-specific notice. Tweak the wording for a
746 failing architecture test.
748 * cris/traps.c (TARGET_SYS_writev): New macro.
749 (is_mapped_only, cris_dump_map): New functions.
750 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
751 and prot combinations and a non-zero page-offset. If
752 TARGET_MAP_FIXED, unmap pages before mapping them.
753 <case TARGET_SYS_mprotect>: When checking, allow any length
754 argument. Don't actually do anything.
755 <case TARGET_SYS_writev>: New case.
757 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
758 * cris/sim-if.c: Include elf-bfd.h.
759 (struct progbounds): New members end_loadmem, start_nonloadmem.
760 (xprintf, eprintf): New functions, copied from common/sim-load.c.
761 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
762 (get_progbounds_iterator): Renamed from get_progbounds. Make
763 static. Update head comment. Set new struct progbounds members.
764 (exec_load_addr, interp_load_addr, interp_start_addr): New static
766 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
767 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
769 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
770 handling to use auxv_entries. Improve error message and checking
771 for invalid programs. Use new variable abfd for the program
772 instead of for each access reaching into sd to get it.
773 (sim_create_inferior): If non-zero, use interp_start_addr instead
774 of the program start address.
775 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
776 stale comment. Always specify little-endian.
778 2008-07-29 Nick Clifton <nickc@redhat.com>
780 * common/genmloop.sh: Add new parameter: -shell to specify the
781 command interpreter to use to run the input file. This is
782 necessary because otherwise SHELL is taken from the user's
783 environment, and not from the makefile that invoked this script
784 and the user might not be running an sh-like shell.
785 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
786 * fr30/Makefile.in: Likewise.
787 * frv/Makefile.in: Likewise.
788 * i960/Makefile.in: Likewise.
789 * iq2000/Makefile.in: Likewise.
790 * m32r/Makefile.in: Likewise.
792 * frv/mloop.in: Add missing start of line comment marker.
794 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
796 * cris/configure: Regenerate to track ../common/common.m4 changes.
797 * cris/config.in: Ditto.
799 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
800 Daniel Jacobowitz <dan@codesourcery.com>
801 Joseph Myers <joseph@codesourcery.com>
803 * cris/configure: Regenerate.
805 2008-05-09 Olivier Hainque <hainque@adacore.com>
807 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
809 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
811 * MAINTAINERS: Add myself as maintainer of cr16 port.
813 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
815 Add simulator for National cr16 processor.
816 * cr16: New directory.
817 * configure.ac: Add entry for National cr16.
818 * configure: Regenerate.
820 2008-02-05 DJ Delorie <dj@redhat.com>
822 * configure.ac (v850): V850 now has a testsuite.
823 * configure (v850): Likewise.
825 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
827 Updated copyright notices for most files.
829 2007-12-19 DJ Delorie <dj@redhat.com>
831 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
834 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
836 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
837 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
838 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
839 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
840 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
841 cris/semcrisv32f-switch.c: Regenerate.
843 2007-08-24 Joel Brobecker <brobecker@adacore.com>
845 Switch the license of all files explicitly copyright the FSF
848 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
850 * Makefile.in: Add dummy "pdf" target.
852 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
854 * cris/traps.c (dump_statistics): Change format for cycle numbers
855 to %llu and cast parameters to unsigned long long.
857 2007-02-16 Thiemo Seufer <ths@mips.com>
859 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
861 2007-01-28 Manuel Lauss <slauss@resi.at>
863 * configure.ac (sh64-*-*): Change to sh64*-*-*.
864 (sh-*-*): Change to sh*-*-*.
865 * configure: Regenerated.
867 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
869 Updated copyright notices for most files.
871 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
873 * Makefile.in (autoconf-common autoheader-common): Only run
874 autoheader on subdirs with a file config.in.
876 * configure.ac (common): Make the default "yes" for all targets
878 * configure: Regenerate.
880 * Makefile.in (autoconf-common autoheader-common): In documented
881 usage, say SHELL=/bin/sh.
882 (.PHONY): Add autoheader-common.
884 * MAINTAINERS: Add self as authorized committer for *.
886 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
887 Hans-Peter Nilsson <hp@axis.com>
889 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
890 (cris_unknown_syscall_action): Declare.
891 * cris/sim-if.c (cris_unknown_syscall_action): Define.
892 (cris_options): Add cris-unknown-syscall option.
893 (cris_option_handler): Correct comment about and error message for
894 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
895 * cris/traps.c: Include stdarg.h
896 (cris_unknown_syscall): New function.
897 (cris_break_13_handler): Instead of sim_io_eprintf and
898 sim_engine_halt, call cris_unknown_syscall to handle more or less
899 unknown syscalls. Adjust code as necessary to handle return
902 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
904 * MAINTAINERS: Add Dave Brolley for sh64.
906 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
908 * cris/traps.c (TARGET_PIPE_BUF): New macro.
909 (cris_pipe_empty): Correct initialization of "remaining". Only
910 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
913 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
915 * cris/configure.ac: Check for limits.h and sys/param.h.
916 * cris/configure, cris/config.in: Rebuild.
917 * cris/traps.c (SIM_PATHMAX): New macro.
918 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
920 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
922 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
923 * Makefile.in (FLAGS_TO_PASS): Include libdir.
924 * configure: Regenerated.
926 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
928 * cris/configure: Regenerated.
930 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
932 * cris/configure: Regenerated.
934 2006-05-05 Andreas Schwab <schwab@suse.de>
936 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
937 * configure: Regenerate.
939 * Makefile.in (CFLAGS_FOR_BUILD): Define.
940 (CC_FOR_BUILD): Don't override.
941 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
943 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
945 * MAINTAINERS: Add an "Authorized committers" section, and list
948 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
950 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
952 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
954 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
955 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
956 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
957 (all): Depend on rvdummy$(EXEEXT).
958 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
959 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
961 * cris/configure: Regenerate.
962 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
963 (enum cris_interrupt_type, crisv10deliver_interrupt)
964 (crisv32deliver_interrupt: New declarations.
965 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
966 sim_events_tickn and set state-events member work_pending when it's
967 time for the next event.
968 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
969 interrupt-delivery function.
970 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
971 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
972 * cris/devices.c: Include hw-device.h.
973 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
974 (device_io_write_buffer): Only perform 0x900000xx-functions if
975 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
976 call hw_io_write_buffer. Add return 0 last in function.
977 * cris/sim-if.c (cris_have_900000xxif): Now global.
978 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
979 Force "-model" option, effectively.
980 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
981 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
983 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
985 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
986 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
987 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
989 2006-03-13 DJ Delorie <dj@redhat.com>
991 * MAINTAINERS: Add self as m32c sim maintainer.
993 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
995 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
997 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
999 2006-01-23 Jim Blandy <jimb@redhat.com>
1001 Add simulator for Renesas M32C and M16C.
1003 * m32c: New directory.
1004 * configure.ac: Add entry for Renesas M32C.
1005 * configure: Regenerate.
1007 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
1009 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
1010 cycle count for the current insn.
1012 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
1014 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
1015 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
1016 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
1017 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
1019 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
1021 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1022 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1023 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1024 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1025 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1026 cris/semcrisv32f-switch.c: Regenerate.
1028 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
1030 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1031 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1033 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1034 F_GETFL on fd 0, 1 and 2.
1036 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
1038 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1039 last_open_fd, last_open_flags.
1040 * cris/traps.c: Don't include targ-vals.h.
1041 (TARGET_O_ACCMODE): Define.
1042 (cris_break_13_handler): Set new _sim_cpu members.
1043 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1044 Rearrange code as switch. Emit "unimplemented" abort for
1045 unimplemented fcntl calls.
1047 * cris/traps.c (TARGET_SYS_stat): Define.
1048 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1049 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1051 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
1053 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1054 low 32 bits are used after an unsigned long cast.
1056 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
1058 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1060 2005-05-26 Chris Demetriou <cgd@netbsd.org>
1062 * MAINTAINERS: Update my mail address, move myself to the
1063 "Past maintainers" section.
1065 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
1067 * configure.ac: Add igen to v850 build.
1068 * configure: Regenerate.
1070 2005-04-29 Paul Brook <paul@codesourcery.com>
1072 * common/callback.c (PIPE_BUF): Provide default definition.
1073 (os_lstat): Use stat if lstat is not available on the host.
1074 (os_ftruncate): Return EINVAL if not available on the host.
1075 (os_truncate): Ditto.
1076 * common/configure.ac: Check for lstat, truncate and ftruncate.
1077 * common/configure: Regenerate.
1078 * common/config.in: Regenerate.
1080 2005-04-27 Paul Brook <paul@codesourcery.com>
1082 * common/Make-common.in: Add $(EXEEXT) to "run".
1084 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
1086 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1087 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1088 implemented. In call to create_map, pad length argument to 8k.
1090 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
1092 * configure.ac: Add explicit sh64 case.
1093 * configure: Regenerate.
1095 2005-03-30 Paul Brook <paul@codesourcery.com>
1097 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1099 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
1101 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1102 include cgen-ops.h in decodev10.c and decodev32.c.
1103 * cris/sim-main.h: Don't include cgen-ops.h here.
1104 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1105 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1106 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1107 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1108 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1109 cris/semcrisv32f-switch.c: Regenerate.
1111 * cris/traps.c (cris_break_13_handler) <case
1112 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1113 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1115 2005-03-23 Mark Kettenis <kettenis@gnu.org>
1117 * cris/configure: Regenerate.
1119 2005-02-28 Jim Blandy <jimb@redhat.com>
1121 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1122 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1123 Regenerated, after change to common/aclocal.m4.
1125 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
1127 * iq2000: New target subdirectory.
1128 * configure.ac: Add iq2000 target.
1129 * configure: Regenerate.
1131 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
1133 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1134 (realclean, install): Fail if subdir make failed.
1136 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
1138 * cris: New directory, simulator for Axis Communications CRIS
1139 including CRIS v32, CGEN-based.
1140 * configure.ac: Add corresponding configury.
1141 * configure: Regenerate.
1143 2005-01-17 Andrew Cagney <cagney@gnu.org>
1145 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1146 common directory. Remove sparc*-*-* from list.
1148 2005-01-11 Andrew Cagney <cagney@gnu.org>
1150 * Makefile.in (autoconf-common autoheader-common): Add --force to
1151 autoconf and autoheader.
1152 (autoconf-common autoheader-common)
1153 (autoconf-install autoheader-install): Check for configure.ac, not
1155 * configure.ac: Delete AC_CONFIG_AUX_DIR.
1156 * configure: Re-generate.
1158 2005-01-07 Andrew Cagney <cagney@gnu.org>
1160 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
1161 correctly calls AC_CONFIG_SUBDIRS.
1162 * configure: Re-generate.
1164 2004-12-01 Andrew Cagney <cagney@gnu.org>
1166 * i960, h8500: Delete directory.
1168 2004-11-12 Andrew Cagney <cagney@gnu.org>
1170 * d30v, fr30, mn10200, z8k: Delete directory.
1172 2004-03-10 Ben Elliston <bje@gnu.org>
1174 * MAINTAINERS: Update my mail address.
1176 2004-01-26 Chris Demetriou <cgd@broadcom.com>
1178 * configure.in (mips*-*-*): Configure in testsuite.
1179 * configure: Regenerate.
1181 2003-10-08 Dave Brolley <brolley@redhat.com>
1183 * configure.in: Move frv handling to alphabetically correct placement.
1185 2003-09-03 Andreas Schwab <schwab@suse.de>
1187 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1189 2003-08-29 Dave Brolley <brolley@redhat.com>
1191 * MAINTAINERS: Add myself as maintainer of the FRV port.
1193 2003-08-20 Michael Snyder <msnyder@redhat.com>
1194 Dave Brolley <brolley@redhat.com>
1196 * frv/: New directory, simulator for the Fujitsu FRV.
1197 * configure.in: Add frv configury.
1198 * configure: Regenerate.
1200 2003-08-10 Ben Elliston <bje@wasabisystems.com>
1202 * MAINTAINERS: Update my mail address.
1204 2003-08-09 Andrew Cagney <cagney@redhat.com>
1206 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1207 maintenance. List igen and sh maintainers. Mention that target
1208 and global maintainers pick up the slack.
1210 2003-07-09 Michael Snyder <msnyder@redhat.com>
1212 * configure.in: Add testsuite to extra_subdirs for sh.
1213 * configure: Regenerate.
1215 2003-01-23 Nick Clifton <nickc@redhat.com>
1219 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
1221 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1223 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
1225 * MAINTAINERS: Update my email address.
1227 2002-07-17 Andrew Cagney <ac131313@redhat.com>
1229 * w65/: Delete directory.
1231 2002-07-16 Andrew Cagney <ac131313@redhat.com>
1233 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1234 * configure: Re-generate.
1236 2002-07-13 Andrew Cagney <ac131313@redhat.com>
1238 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1239 * configure: Re-generate.
1241 2002-06-16 Andrew Cagney <ac131313@redhat.com>
1243 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1244 id, date and host to be overriden by NAME, ID, DATE and HOST
1245 respectfully. Use ISO dates.
1247 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
1249 * Makefile.in (ChangeLog): New makefile variable.
1250 * README-HACKING: Mention the ChangeLog makefile variable.
1252 2002-06-01 Andrew Cagney <ac131313@redhat.com>
1254 * tic80/: Delete directory.
1256 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
1258 * MAINTAINERS: Update my email address.
1260 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
1262 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1264 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
1266 * MAINTAINERS: Record self as a co-maintainer of just common/.
1268 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
1270 * MAINTAINERS: Point to GDB files describing overall maintaince
1271 and check-in procedures.
1273 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
1275 * MAINTAINERS: Add myself for ARM portions.
1277 2001-10-19 Andrew Cagney <ac131313@redhat.com>
1279 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1280 * configure: Re-generate.
1282 2001-02-16 Ben Elliston <bje@redhat.com>
1284 * MAINTAINERS: Add myself for common portions.
1286 2001-01-15 Chris Demetriou <cgd@broadcom.com>
1288 * MAINTAINERS: Added self and Andrew for the mips sim.
1290 2000-10-25 Geoff Keating <geoffk@cygnus.com>
1292 * MAINTAINERS: Added self and Andrew for the ppc sim.
1294 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
1296 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1297 * m68hc11: New directory.
1298 * configure.in: Add.
1299 * configure: Regenerate.
1301 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1303 * tic80: New directory.
1304 * configure.in: Add configury.
1305 * configure: Regenerate.
1307 2000-04-20 Nick Clifton <nickc@cygnus.com>
1309 * configure.in (extra_subdirs): Add testsuite to strongarm
1311 * configure: Regenerate.
1313 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1315 * MAINTAINERS: New file. Blank.
1317 1999-11-18 Ben Elliston <bje@cygnus.com>
1319 * configure.in: Require autoconf 2.13 and remove obsolete
1320 invocation of AC_C_CROSS.
1321 * configure: Regenerate.
1323 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1325 * configure.in: Configure the testsuite directory for thumb.
1326 * configure: Regenerate.
1328 1999-07-16 Ben Elliston <bje@cygnus.com>
1330 * configure.in: Configure the testsuite directory for arm.
1331 * configure: Regenerate.
1333 1999-04-08 Nick Clifton <nickc@cygnus.com>
1335 * configure.in: Add support for MCore target.
1336 * configure: Regenerate.
1338 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1340 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1341 RUNTEST instead of commenting out, fixes portability problem.
1343 1999-02-08 Nick Clifton <nickc@cygnus.com>
1345 * configure.in: Add support for StrongARM target.
1346 * configure: Regenerate.
1348 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1350 * configure.in: Require autoconf 2.12.1 or higher.
1352 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1354 * configure.in (i960-*-*): Add.
1355 * configure: Rebuild.
1357 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1359 * configure.in: Added case for fr30-*-*.
1360 * configure: Regenerated.
1362 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1364 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1365 to allow successful operation on Windows.
1367 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1369 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1370 check can be invoked recursively.
1372 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1374 * configure.in: Build simulator on sparclite and sparc86x targets.
1375 * configure: Regenerate.
1377 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1379 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1380 to autoconf and autoheader.
1382 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1384 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1385 ../common' to autoconf and autoheader. Unconditionally run
1386 autoconf in every subdir.
1387 (autoconf-changelog autoheader-changelog): Unconditionally run
1388 commands in every subdir.
1389 (autoconf-install autoheader-install): Likewise.
1391 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1393 * Makefile.in: Get SHELL from configure.
1394 * (FLAGS_TO_PASS): Pass down SHELL.
1395 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1398 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1400 * configure.in (extra_subdirs): Enable igen for mn10300.
1401 * configure: Re-generate.
1403 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1405 * configure.in (extra_subdirs): Add support for thumb target.
1407 * configure (extra_subdirs): Add support for thumb target.
1409 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1411 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1413 * configure: Regenerate.
1415 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1417 * configure.in (extra_subdirs): v850ea needs igen.
1418 * configure: Re-generate.
1420 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1422 * configure.in (testdir): When a testsuite directory, add that to
1423 the list of confdirs.
1425 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1427 * configure.in (extra_subdirs): Enable igen ready for V850.
1429 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1431 * configure.in (w65-*-*, only_if_enabled): Set.
1432 * configure: Re-generate.
1434 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1436 * configure.in (sparc*-*-*, only_if_enabled): Set
1437 only_if_enabled=yes. Check only_if_enabled before enabling a
1439 * configure: Regenerate.
1441 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1443 * configure.in (extra_subdirs): Add v850e target.
1445 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1447 * configure.in (extra_subdirs): Add v850ea target.
1449 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1451 * configure.in (sparc*-*-*): Don't build erc32.
1452 * configure: Regenerate.
1454 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1456 * configure.in (m32r-*-*): New target.
1457 * configure: Regenerate.
1459 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1461 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1463 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1464 thought that .NOEXPORT was the default target.
1466 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1468 * Makefile.in (clean mostlyclean): Restore targets accidentally
1469 deleted in earlier change.
1471 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1473 * Makefile.in (autoheader-common, autoheader-changelog,
1474 autoheader-install): Perform autoheader in addition to autoconf.
1476 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1478 * Makefile.in (autoconf-install): New target.
1479 (autoconf-changelog): Try different way to obtain user name.
1481 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1483 * Makefile.in (autoconf-changelog): New target, update
1484 ChangeLog for all subdirectories - normally used after
1485 autoconf-common target.
1487 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1489 * configure.in (extra_subdirs): Include testsuite for d30v.
1490 * configure: Regenerate.
1492 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1494 (check): New rules - drive the testsuite.
1496 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1498 * configure.in: Add mn10200 configure lines accidentally
1500 * configure: Regenerated.
1502 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1504 * configure.in (extra_subdirs): Generalize common sub directory
1506 (extra_subdirs): For d30v add igen to the list to be built.
1508 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1510 * configure.in (d30v): New target.
1511 * configure: Regenerated.
1513 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1515 * configure.in: Don't require GCC to build the mn10200
1517 * configure: Rebuilt.
1519 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1521 * configure.in: Don't configure any subdirs if no simulator
1522 is being built. Don't use erc32 for sparc64.
1523 * configure: Regenerated.
1525 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1527 * Makefile.in (autoconf-common): New target.
1528 * configure.in: Do configure common.
1529 * configure: Regenerated.
1531 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1533 * configure configure.in: Don't configure common anymore. Files
1534 from common are now built in the individual simualtor directories.
1535 This fixes problems with the WinGDB build procedure.
1537 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1539 * configure: Enable the mn10200 simulator.
1541 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1543 * configure.in (configdirs): Add common.
1544 * configure: Regenerated.
1546 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1548 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1549 system V based targets.
1550 * configure: Regenerate.
1552 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1554 * configure.in (--enable-sim-powerpc): Delete.
1555 (--enable-sim): Add.
1556 * configure: Regenerated.
1558 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1560 * configure.in: Only build the V850 simulator if
1562 * configure: Rebuild.
1564 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1566 * configure.in: Do build erc32 for DOS and Windows hosts.
1567 * configure: Rebuild.
1569 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1571 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1572 be inherited from the parent. Remove INSTALL_XFORM and
1573 INSTALL_XFORM1. Make INSTALL be set from configure.
1575 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1577 * configure.in: Only build the MIPS simulator if we are using
1579 * configure: Rebuild.
1581 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1583 * configure.in (v850-*-*): Added V850 simulator.
1585 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1587 * configure.in (d10v-*-*): Added D10V simulator.
1589 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1591 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1592 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1594 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1595 (AC_PROG_INSTALL): Added.
1596 * configure: Rebuilt.
1598 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1600 * configure.in: Only configure erc32 if using gcc.
1601 * configure: Rebuild.
1603 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1605 * configure.in (sim_target): Build PowerPC simulator for powerpc
1606 System V.4, Solaris, and Elf targets.
1607 * configure: Regenerate with autoconf 2.10.
1609 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1611 * configure.in: Only built erc32 simulator on Unix hosts as it
1613 * configure: Regenerated with autoconf 2.8.
1615 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1617 * erc32: Sparc simulator from the ESA.
1619 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1621 From: Miles Bader <miles@gnu.ai.mit.edu>
1622 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1623 * configure: Regenerate using autoconf.
1625 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1627 * Makefile.in (install): Fix typo.
1629 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1631 * configure: Regenerate with autoconf 2.7.
1633 * Makefile.in (all): Simplify.
1634 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1635 as in the all target.
1636 (distclean, maintainer-clean, realclean): Likewise.
1637 (install): Likewise.
1639 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1641 * Makefile.in (all): Remove extra '\' char from shell script.
1643 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1645 * Makefile.in (all): Avoid a for loop with zero elements, even if
1646 the loop will not be executed because of an if statement.
1648 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1650 * Makefile.in (install): Add missing semicolon in "fi \".
1652 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1654 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1655 defaults from configure.
1657 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1659 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1660 if either --enable-sim-powerpc is used, or the host compiler is
1663 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1665 * configure.in (mips*-*-*): Added "mips" simulator target.
1666 * configure: Re-generated.
1668 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1670 * Makefile.in (BISON): Remove macro.
1671 (FLAGS_TO_PASS): Remove BISON.
1673 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1675 * configure.in: Explicitly `exit 0' for broken shells.
1676 * configure: Rebuilt.
1678 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1680 * common/run.c (main): Initialize the callbacks.
1682 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1684 * Makefile.in (maintainer-clean): New synonym for realclean.
1686 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1688 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1689 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1691 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1693 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1694 <cagney@highland.com.au>.
1695 * configure: Regnerate from configure.in.
1697 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1699 * Update all FSF addresses except those in COPYING* files.
1701 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1703 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1704 submakes either default or passed in value.
1706 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1708 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1709 install): Changed targets so that they descend all
1710 subdirectories in $(SUBDIRS).
1711 (*-all, *-clean, *-install): Removed targets.
1713 * configure.in: Don't bother with target makefile fragments, they
1714 are no longer needed.
1715 * configure: regenerated.
1717 * Makefile.in, configure.in: converted to autoconf.
1718 * configure: New file, generated with autconf 2.4.
1720 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1722 * Makefile.in: Support ARM.
1723 * configure.in: Ditto.
1725 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1727 * Makefile.in: Support W65.
1728 * configure.in: Ditto.
1730 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1732 * Makefile.in: Add TAGS target.
1734 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1736 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1737 install-h8300, clean-h8300, all-h8500, install-h8500,
1738 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1741 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1743 * Makefile.in: remove endian.h trace from h8500
1745 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1747 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1749 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1751 * Makefile.in: make all of the all-* target (except all-nothing)
1752 depend on endian.h, so that if we're not building a simulator, we
1755 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1757 * Makefile.in (check, installcheck): Added dummy targets.
1759 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1761 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1762 explicitly make it, since some makes apparently don't work with
1763 VPATH and .c to executable rules (SunOS make for example).
1765 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1767 * Makefile.in (endian): Add explicit rule for broken makes.
1769 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1771 * Makefile.in (info, install-info): New targets.
1772 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1775 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1777 * Makefile.in (endian.h): build endian.h via a temporary file so
1778 that we don't leave an incomplete file lying around on
1780 (clean): remove endian, e.h, and endian.h.
1782 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1784 * Makefile.in, configure.in: if target isn't supported, build a