sim/ChangeLog

   1 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * arm/configure: Regenerated.
   4         * avr/configure: Likewise.
   5         * bfin/configure: Likewise.
   6         * common/configure: Likewise.
   7         * cr16/configure: Likewise.
   8         * cris/configure: Likewise.
   9         * d10v/configure: Likewise.
  10         * erc32/configure: Likewise.
  11         * frv/configure: Likewise.
  12         * ft32/configure: Likewise.
  13         * h8300/configure: Likewise.
  14         * igen/configure: Likewise.
  15         * iq2000/configure: Likewise.
  16         * lm32/configure: Likewise.
  17         * m32c/configure: Likewise.
  18         * m32r/configure: Likewise.
  19         * m68hc11/configure: Likewise.
  20         * mcore/configure: Likewise.
  21         * microblaze/configure: Likewise.
  22         * mips/configure: Likewise.
  23         * mn10300/configure: Likewise.
  24         * moxie/configure: Likewise.
  25         * msp430/configure: Likewise.
  26         * ppc/configure: Likewise.
  27         * rl78/configure: Likewise.
  28         * rx/configure: Likewise.
  29         * sh/configure: Likewise.
  30         * sh64/configure: Likewise.
  31         * v850/configure: Likewise.
  32
  33 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
  34
  35         * configure: Regenerate.
  36         * configure.ac: Delete sim_testsuite check and config in testsuite.
  37         * configure.tgt (sim_testsuite): Delete everywhere.
  38
  39 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
  40
  41         * configure: Regenerate.
  42         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
  43
  44 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
  45
  46         * configure.tgt: Add FT32 entry.
  47         * configure: Regenerate.
  48
  49 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
  50
  51         * .gitignore: Delete tconfig.h.
  52         * README-HACKING: Change tconfig.in to tconfig.h.
  53
  54 2014-03-12  Nick Clifton  <nickc@redhat.com>
  55
  56         * MAINTAINERS: Add myself as the maintainer for the MSP430.
  57
  58 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
  59
  60         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
  61         * configure: Regenerate.
  62
  63 2014-01-06  Tom Tromey  <tromey@redhat.com>
  64
  65         * common/cgen-trace.c: Don't use old VA_* macros.
  66         * common/sim-load.c (xprintf): Likewise.
  67         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
  68
  69 2014-01-06  Tom Tromey  <tromey@redhat.com>
  70
  71         * README-HACKING: Don't use PARAMS.
  72         * arm/wrapper.c: Don't use PARAMS.
  73         * bfin/sim-main.h: Don't use PARAMS.
  74         * common/callback.c: Don't use PARAMS.
  75         * common/cgen-trace.c: Don't use PARAMS.
  76         * common/run-sim.h: Don't use PARAMS.
  77         * common/run.c: Don't use PARAMS.
  78         * common/sim-base.h: Don't use PARAMS.
  79         * common/sim-load.c: Don't use PARAMS.
  80         * common/sim-options.h: Don't use PARAMS.
  81         * common/sim-trace.c: Don't use PARAMS.
  82         * common/sim-trace.h: Don't use PARAMS.
  83         * common/sim-utils.h: Don't use PARAMS.
  84         * cr16/cr16_sim.h: Don't use PARAMS.
  85         * cr16/gencode.c: Don't use PARAMS.
  86         * cr16/interp.c: Don't use PARAMS.
  87         * cr16/simops.c: Don't use PARAMS.
  88         * d10v/d10v_sim.h: Don't use PARAMS.
  89         * d10v/gencode.c: Don't use PARAMS.
  90         * d10v/interp.c: Don't use PARAMS.
  91         * d10v/simops.c: Don't use PARAMS.
  92         * erc32/erc32.c: Don't use PARAMS.
  93         * erc32/exec.c: Don't use PARAMS.
  94         * erc32/float.c: Don't use PARAMS.
  95         * erc32/func.c: Don't use PARAMS.
  96         * erc32/sis.c: Don't use PARAMS.
  97         * erc32/sis.h: Don't use PARAMS.
  98         * mips/interp.c: Don't use PARAMS.
  99         * mips/sim-main.h: Don't use PARAMS.
 100         * sh/interp.c: Don't use PARAMS.
 101         * v850/sim-main.h: Don't use PARAMS.
 102         * v850/v850_sim.h: Don't use PARAMS.
 103
 104 2013-11-07  Will Newton  <will.newton@linaro.org>
 105
 106         PR gdb/15508
 107         * arm/wrapper.c (sim_create_inferior): Call init before
 108         accessing STATE.
 109
 110 2013-11-07  Will Newton  <will.newton@linaro.org>
 111
 112         PR gdb/8989
 113         * arm/wrapper.c (sim_create_inferior): Avoid calling
 114         bfd_get_mach with a NULL bfd.
 115
 116 2013-06-21  Nick Clifton  <nickc@redhat.com>
 117
 118         * msp430: New Directory.
 119         * configure.tgt: Add it.
 120         * configure: Regenerate.
 121
 122 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 123
 124         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 125         * avr/interp.c (sim_complete_command): Ditto.
 126         * common/sim-options.c (sim_complete_command): Ditto.
 127         * cr16/interp.c (sim_complete_command): Ditto.
 128         * erc32/interf.c (sim_complete_command): Ditto.
 129         * m32c/gdb-if.c (sim_complete_command): Ditto.
 130         * microblaze/interp.c (sim_complete_command): Ditto.
 131         * ppc/sim_calls.c (sim_complete_command): Ditto.
 132         * rl78/gdb-if.c (sim_complete_command): Ditto.
 133         * rx/gdb-if.c (sim_complete_command): Ditto.
 134         * sh/interp.c (sim_complete_command): Ditto.
 135
 136 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 137
 138         Update year range in copyright notice of all files.
 139
 140 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 141
 142         Update old contact info in GPL license notices.
 143
 144 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 145
 146         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 147
 148 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 149
 150         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 151         condition.
 152         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 153         * arm/configure: Regenerate.
 154         * avr/configure: Regenerate.
 155         * bfin/configure: Regenerate.
 156         * common/configure: Regenerate.
 157         * cr16/configure: Regenerate.
 158         * cris/configure: Regenerate.
 159         * d10v/configure: Regenerate.
 160         * erc32/configure: Regenerate.
 161         * frv/configure: Regenerate.
 162         * h8300/configure: Regenerate.
 163         * igen/configure: Regenerate.
 164         * iq2000/configure: Regenerate.
 165         * lm32/configure: Regenerate.
 166         * m32c/configure: Regenerate.
 167         * m32r/configure: Regenerate.
 168         * m68hc11/configure: Regenerate.
 169         * mcore/configure: Regenerate.
 170         * microblaze/configure: Regenerate.
 171         * mips/configure: Regenerate.
 172         * mn10300/configure: Regenerate.
 173         * moxie/configure: Regenerate.
 174         * ppc/configure: Regenerate.
 175         * rl78/configure: Regenerate.
 176         * rx/configure: Regenerate.
 177         * sh/configure: Regenerate.
 178         * sh64/configure: Regenerate.
 179         * testsuite/configure: Regenerate.
 180         * v850/configure: Regenerate.
 181
 182 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 183
 184         * MAINTAINERS: Update my email address.
 185
 186 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 187
 188         * mips/basic.exp: Add mips*-mti-elf* target.
 189         * configure.ac: Add mips*-mti-elf* target.
 190         * configure: Regenerate.
 191
 192 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 193
 194         * configure: Regenerate.
 195
 196 2012-06-06  Michael Eager  <eager@eagercon.com>
 197
 198         * microblaze/interp.c (config.h): Add #include.
 199
 200 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 201
 202         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 203         Frysinger.
 204
 205 2011-11-28  DJ Delorie  <dj@redhat.com>
 206
 207         * configure.tgt: Add rl78 support.
 208         * configure: Regenerate.
 209         * rl78: New directory.
 210         * MAINTAINERS: Add myself as RL78 maintainer.
 211
 212 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 213
 214         * MAINTAINERS: Remove Thiemo Seufer.
 215
 216 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 217
 218         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 219         * configure: Regenerate.
 220
 221 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 222
 223         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 224         handle targets.
 225         * configure: Regenerate.
 226
 227 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 228
 229         * MAINTAINERS: Add bfin entry.
 230         * configure.tgt (bfin-*-*): Handle bfin targets.
 231         * configure: Regenerate.
 232
 233 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 234
 235         * .gitignore: Add /*/hw-config.h.
 236
 237 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 238
 239         * .gitignore: New file.
 240
 241 2010-07-28  DJ Delorie  <dj@redhat.com>
 242
 243         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 244
 245 2010-06-08  Nick Clifton  <nickc@redhat.com>
 246
 247         * reg.c (set_oszc): Use unsigned int for the mask.
 248         (set_szc, set_osz, set_sz): Likewise.
 249
 250 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 251
 252         * configure.ac: Target logic moved out to and included from ...
 253         * configure.tgt: ... this new file.
 254         * configure: Regenerated.
 255
 256 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 257
 258         * README-HACKING: Add more sections.
 259
 260 2010-02-11  Doug Evans  <dje@sebabeach.org>
 261
 262         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 263         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 264         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 265         * cris/semcrisv32f-switch.c: Regenerate.
 266
 267 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 268
 269         * avr/configure: Regenerate.
 270         * cris/configure: Regenerate.
 271         * microblaze/configure: Regenerate.
 272
 273 2010-01-02  Doug Evans  <dje@sebabeach.org>
 274
 275         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 276         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 277         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 278         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 279         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 280         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 281
 282 2010-01-01  Doug Evans  <dje@sebabeach.org>
 283
 284         * cris/mloop.in: Fix copyright year update snafu.
 285
 286 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 287
 288         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 289         * common/common.m4: Use AM_ZLIB to check for zlib support.
 290         * ppc/configure.ac: Likewise.
 291         * arm/configure, avr/configure, common/configure, cr16/configure,
 292         cris/configure, d10v/configure, erc32/configure, frv/configure,
 293         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 294         m32r/configure, m68hc11/configure, mcore/configure,
 295         microblaze/configure, mips/configure, mn10300/configure,
 296         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 297         v850/configure: Regenerate.
 298
 299 2009-11-24  DJ Delorie  <dj@redhat.com>
 300
 301         * rx: New directory.
 302         * configure.ac: Add entry for Renesas RX.
 303         * configure: Regenerate.
 304
 305 2009-11-22  Doug Evans  <dje@sebabeach.org>
 306
 307         * cris/cpuall.h: Regenerate.
 308         * cris/cpuv10.h: Regenerate.
 309         * cris/cpuv32.h: Regenerate.
 310         * cris/decodev10.c: Regenerate.
 311         * cris/decodev10.h: Regenerate.
 312         * cris/decodev32.c: Regenerate.
 313         * cris/decodev32.h: Regenerate.
 314
 315 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 316
 317         * avr/interp.c (sim_write): Allow byte access.
 318         (sim_read): Ditto.
 319
 320 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 321
 322         * avr/interp.c (sim_load): Clear memory before loading.
 323
 324 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 325
 326         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 327
 328 2009-10-23  Doug Evans  <dje@sebabeach.org>
 329
 330         * cris/arch.c: Regenerate.
 331         * cris/arch.h: Regenerate.
 332         * cris/cpuall.h: Regenerate.
 333         * cris/cpuv10.c: Regenerate.
 334         * cris/cpuv10.h: Regenerate.
 335         * cris/cpuv32.c: Regenerate.
 336         * cris/cpuv32.h: Regenerate.
 337         * cris/cris-desc.c: Regenerate.
 338         * cris/cris-desc.h: Regenerate.
 339         * cris/cris-opc.h: Regenerate.
 340         * cris/decodev10.c: Regenerate.
 341         * cris/decodev10.h: Regenerate.
 342         * cris/decodev32.c: Regenerate.
 343         * cris/decodev32.h: Regenerate.
 344         * cris/modelv10.c: Regenerate.
 345         * cris/modelv32.c: Regenerate.
 346         * cris/semcrisv10f-switch.c: Regenerate.
 347         * cris/semcrisv32f-switch.c: Regenerate.
 348
 349 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 350
 351         * avr/interp.c (sim_stop): Return 1.
 352
 353 2009-10-16  Doug Evans  <dje@sebabeach.org>
 354
 355         * MAINTAINERS: Add myself as m32r maintainer.
 356
 357 2009-10-15  Michael Egaer  <eager@eagercon.com>
 358
 359         * MAINTAINERS: Add self as MicroBlaze maintainer.
 360
 361 2009-10-14  Ben Elliston  <bje@gnu.org>
 362
 363         * MAINTAINERS (common): Move myself to "past maintainers" section.
 364
 365 2009-10-06  Michael Eager  <eager@eagercon.com>
 366
 367         * microblaze/interp.c: Add include microblaze-dis.h.
 368
 369 2009-09-23  Michael Eager  <eager@eagercon.com>
 370
 371         * configure: Add microblaze-*.* (not regenerated).
 372         * configure.ac: Likewise.
 373         * microblaze/config.in: New.
 374         * microblaze/configure: Generate.
 375         * microblaze/configure.ac: New.
 376         * microblaze/interp.c: New.
 377         * microblaze/Makefile.in: New.
 378         * microblaze/microblaze.h: New.
 379         * microblaze/microblaze.isa: New.
 380         * microblaze/sim-main.h: New.
 381         * microblaze/sysdep.h: New.
 382
 383 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 384
 385         * avr/config.in: Regenerate.
 386         * avr/configure: Likewise.
 387         * configure: Likewise.
 388         * cris/config.in: Likewise.
 389         * cris/configure: Likewise.
 390
 391         * configure.ac: m4_include toplevel config/override.m4.
 392         * configure: Regenerate.
 393         * avr/configure: Regenerate.
 394         * cris/configure: Regenerate.
 395
 396 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 397
 398         * Makefile.in (datarootdir): New variable.
 399
 400 2009-05-18  Jon Beniston <jon@beniston.com>
 401
 402         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 403         * configure.ac: Add lm32 target.
 404         * lm32: New directory.
 405
 406 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 407
 408         * MAINTAINERS: Orphan ppc.
 409
 410 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 411
 412         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 413         m32c_signal_to_target.  Change signal return values from SIGILL,
 414         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 415         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 416
 417 2009-04-30  Anthony Green  <green@moxielogic.com>
 418
 419         * MAINTAINERS: Add myself for the moxie port.
 420         * moxie: New directory.
 421         * configure.ac: Add entry for moxie.
 422         * configure: Regenerate.
 423
 424 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 425
 426         * avr: New directory.
 427         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 428         * avr/config.in: New file, generated by autoheader.
 429         * avr/configure: New file generated by autoconf.
 430         * configure.ac: Add avr.
 431         * configure: Regenerated.
 432
 433 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 434
 435         * Makefile.in: Add dummy install-pdf, html, and
 436         install-html targets.
 437
 438 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 439
 440         * cris/sim-if.c: Include errno.h.
 441         (cris_start_address, cris_program_offset): New variables.
 442         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 443         enums.
 444         (cris_options): New options --cris-program-offset and
 445         --cris-start-address.
 446         (cris_option_handler): Handle new options.
 447         (cris_program_offset_write, cris_set_section_offset_iterator)
 448         (cris_offset_sections, cris_offset_sections): New functions.
 449         (sim_load): Use cris_program_offset_write as function argument to
 450         cris_load_elf_file, not sim_write.
 451         (struct offsetinfo): New struct.
 452         (cris_handle_interpreter): Fix typo in comment.
 453         (sim_open): Call cris_offset_sections as soon as the bfd of the
 454         infile is available.  Gate bfd validity checks on abfd non-NULL.
 455         (sim_create_inferior): Let cris_start_address when != -1 override
 456         other start-address choices.
 457
 458 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 459
 460         * cris/traps.c (abort): Define to call sim_io_error.
 461         (create_map): Make -1 imply a non-fixed address, not 0.  All
 462         callers changed.  Only prefer the next higher unmapped address if
 463         the last mapped address is no less than 0x40000000.  Check that
 464         the address to be mapped is not already mapped.  Update head
 465         comment.
 466         (unmap_pages): Don't call abort when recursive call fails, just
 467         note and return an error if a page in the range couldn't be unmapped.
 468         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 469         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 470         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 471         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 472         don't abort on page not being mapped.  Handle non-anon filemap
 473         with length padded to pagesize.
 474
 475 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 476
 477         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 478         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 479         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 480         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 481         (TARGET_AT_CLKTCK): Remove redundant macros.
 482         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 483         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 484         callers.
 485         (sim_open): Also pass AT_SECURE.
 486
 487         * cris/sim-main.h (struct _sim_cpu): New member
 488         set_target_thread_data.
 489         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 490         * cris/crisv10f.c: Ditto.
 491         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 492         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 493         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 494         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 495         case.
 496
 497         * cris/traps.c (TARGET_SYS_exit_group): Define.
 498         (cris_break_13_handler): Handle it like the exit for the last
 499         thread.
 500
 501         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 502         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 503         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 504         2.6.27.  Set machine field to the BFD printable name of the
 505         machine.
 506
 507         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 508         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 509         TARGET_MAP_DENYWRITE.
 510
 511         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 512         (TARGET_X_OK, TARGET_F_OK): Define.
 513         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 514
 515         * cris/semcrisv32f-switch.c: Regenerate.
 516
 517 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 518
 519         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 520         just a short CRIS-specific notice.  Tweak the wording for a
 521         failing architecture test.
 522
 523         * cris/traps.c (TARGET_SYS_writev): New macro.
 524         (is_mapped_only, cris_dump_map): New functions.
 525         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 526         and prot combinations and a non-zero page-offset.  If
 527         TARGET_MAP_FIXED, unmap pages before mapping them.
 528         <case TARGET_SYS_mprotect>: When checking, allow any length
 529         argument.  Don't actually do anything.
 530         <case TARGET_SYS_writev>: New case.
 531
 532         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 533         * cris/sim-if.c: Include elf-bfd.h.
 534         (struct progbounds): New members end_loadmem, start_nonloadmem.
 535         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 536         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 537         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 538         static.  Update head comment.  Set new struct progbounds members.
 539         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 540         variables.
 541         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 542         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 543         functions.
 544         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 545         handling to use auxv_entries.  Improve error message and checking
 546         for invalid programs.  Use new variable abfd for the program
 547         instead of for each access reaching into sd to get it.
 548         (sim_create_inferior): If non-zero, use interp_start_addr instead
 549         of the program start address.
 550         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 551         stale comment.  Always specify little-endian.
 552
 553 2008-07-29  Nick Clifton  <nickc@redhat.com>
 554
 555         * common/genmloop.sh: Add new parameter: -shell to specify the
 556         command interpreter to use to run the input file.  This is
 557         necessary because otherwise SHELL is taken from the user's
 558         environment, and not from the makefile that invoked this script
 559         and the user might not be running an sh-like shell.
 560         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 561         * fr30/Makefile.in: Likewise.
 562         * frv/Makefile.in: Likewise.
 563         * i960/Makefile.in: Likewise.
 564         * iq2000/Makefile.in: Likewise.
 565         * m32r/Makefile.in: Likewise.
 566
 567         * frv/mloop.in: Add missing start of line comment marker.
 568
 569 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 570
 571         * cris/configure: Regenerate to track ../common/common.m4 changes.
 572         * cris/config.in: Ditto.
 573
 574 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 575             Daniel Jacobowitz  <dan@codesourcery.com>
 576             Joseph Myers  <joseph@codesourcery.com>
 577
 578         * cris/configure: Regenerate.
 579
 580 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 581
 582         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 583
 584 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 585
 586         * MAINTAINERS: Add myself as maintainer of cr16 port.
 587
 588 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 589
 590         Add simulator for National cr16 processor.
 591         * cr16: New directory.
 592         * configure.ac: Add entry for National cr16.
 593         * configure: Regenerate.
 594
 595 2008-02-05  DJ Delorie  <dj@redhat.com>
 596
 597         * configure.ac (v850): V850 now has a testsuite.
 598         * configure (v850): Likewise.
 599
 600 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 601
 602         Updated copyright notices for most files.
 603
 604 2007-12-19  DJ Delorie  <dj@redhat.com>
 605
 606         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 607         cut_point.
 608
 609 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 610
 611         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 612         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 613         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 614         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 615         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 616         cris/semcrisv32f-switch.c: Regenerate.
 617
 618 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 619
 620         Switch the license of all files explicitly copyright the FSF
 621         to GPLv3.
 622
 623 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 624
 625         * Makefile.in: Add dummy "pdf" target.
 626
 627 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 628
 629         * cris/traps.c (dump_statistics): Change format for cycle numbers
 630         to %llu and cast parameters to unsigned long long.
 631
 632 2007-02-16  Thiemo Seufer  <ths@mips.com>
 633
 634         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 635
 636 2007-01-28  Manuel Lauss  <slauss@resi.at>
 637
 638         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 639         (sh-*-*): Change to sh*-*-*.
 640         * configure: Regenerated.
 641
 642 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 643
 644         Updated copyright notices for most files.
 645
 646 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 647
 648         * Makefile.in (autoconf-common autoheader-common): Only run
 649         autoheader on subdirs with a file config.in.
 650
 651         * configure.ac (common): Make the default "yes" for all targets
 652         with sim subdirs.
 653         * configure: Regenerate.
 654
 655         * Makefile.in (autoconf-common autoheader-common): In documented
 656         usage, say SHELL=/bin/sh.
 657         (.PHONY): Add autoheader-common.
 658
 659         * MAINTAINERS: Add self as authorized committer for *.
 660
 661 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 662             Hans-Peter Nilsson  <hp@axis.com>
 663
 664         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 665         (cris_unknown_syscall_action): Declare.
 666         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 667         (cris_options): Add cris-unknown-syscall option.
 668         (cris_option_handler): Correct comment about and error message for
 669         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 670         * cris/traps.c: Include stdarg.h
 671         (cris_unknown_syscall): New function.
 672         (cris_break_13_handler): Instead of sim_io_eprintf and
 673         sim_engine_halt, call cris_unknown_syscall to handle more or less
 674         unknown syscalls.  Adjust code as necessary to handle return
 675         value.
 676
 677 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 678
 679         * MAINTAINERS: Add Dave Brolley for sh64.
 680
 681 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 682
 683         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 684         (cris_pipe_empty): Correct initialization of "remaining".  Only
 685         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 686         are written.
 687
 688 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 689
 690         * cris/configure.ac: Check for limits.h and sys/param.h.
 691         * cris/configure, cris/config.in: Rebuild.
 692         * cris/traps.c (SIM_PATHMAX): New macro.
 693         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 694
 695 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 696
 697         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 698         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 699         * configure: Regenerated.
 700
 701 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 702
 703         * cris/configure: Regenerated.
 704
 705 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 706
 707         * cris/configure: Regenerated.
 708
 709 2006-05-05  Andreas Schwab  <schwab@suse.de>
 710
 711         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 712         * configure: Regenerate.
 713
 714         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 715         (CC_FOR_BUILD): Don't override.
 716         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 717
 718 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 719
 720         * MAINTAINERS: Add an "Authorized committers" section, and list
 721         DJ Delorie for v850.
 722
 723 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 724
 725         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 726
 727 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 728
 729         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 730         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 731         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 732         (all): Depend on rvdummy$(EXEEXT).
 733         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 734         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 735         default off.
 736         * cris/configure: Regenerate.
 737         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 738         (enum cris_interrupt_type, crisv10deliver_interrupt)
 739         (crisv32deliver_interrupt: New declarations.
 740         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 741         sim_events_tickn and set state-events member work_pending when it's
 742         time for the next event.
 743         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 744         interrupt-delivery function.
 745         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 746         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 747         * cris/devices.c: Include hw-device.h.
 748         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 749         (device_io_write_buffer): Only perform 0x900000xx-functions if
 750         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 751         call hw_io_write_buffer.  Add return 0 last in function.
 752         * cris/sim-if.c (cris_have_900000xxif): Now global.
 753         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 754         Force "-model" option, effectively.
 755         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 756         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 757
 758 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 759
 760         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 761         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 762         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 763
 764 2006-03-13  DJ Delorie  <dj@redhat.com>
 765
 766         * MAINTAINERS: Add self as m32c sim maintainer.
 767
 768 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 769
 770         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 771         mapping.
 772         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 773
 774 2006-01-23  Jim Blandy  <jimb@redhat.com>
 775
 776         Add simulator for Renesas M32C and M16C.
 777
 778         * m32c: New directory.
 779         * configure.ac: Add entry for Renesas M32C.
 780         * configure: Regenerate.
 781
 782 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 783
 784         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 785         cycle count for the current insn.
 786
 787 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 788
 789         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 790         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 791         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 792         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 793
 794 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 795
 796         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 797         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 798         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 799         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 800         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 801         cris/semcrisv32f-switch.c: Regenerate.
 802
 803 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 804
 805         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 806         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 807         TARGET_O_WRONLY.
 808         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 809         F_GETFL on fd 0, 1 and 2.
 810
 811 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 812
 813         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 814         last_open_fd, last_open_flags.
 815         * cris/traps.c: Don't include targ-vals.h.
 816         (TARGET_O_ACCMODE): Define.
 817         (cris_break_13_handler): Set new _sim_cpu members.
 818         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 819         Rearrange code as switch.  Emit "unimplemented" abort for
 820         unimplemented fcntl calls.
 821
 822         * cris/traps.c (TARGET_SYS_stat): Define.
 823         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 824         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 825
 826 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 827
 828         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 829         low 32 bits are used after an unsigned long cast.
 830
 831 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 832
 833         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 834
 835 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 836
 837         * MAINTAINERS: Update my mail address, move myself to the
 838         "Past maintainers" section.
 839
 840 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 841
 842         * configure.ac: Add igen to v850 build.
 843         * configure: Regenerate.
 844
 845 2005-04-29  Paul Brook  <paul@codesourcery.com>
 846
 847         * common/callback.c (PIPE_BUF): Provide default definition.
 848         (os_lstat): Use stat if lstat is not available on the host.
 849         (os_ftruncate): Return EINVAL if not available on the host.
 850         (os_truncate): Ditto.
 851         * common/configure.ac: Check for lstat, truncate and ftruncate.
 852         * common/configure: Regenerate.
 853         * common/config.in: Regenerate.
 854
 855 2005-04-27  Paul Brook  <paul@codesourcery.com>
 856
 857         * common/Make-common.in: Add $(EXEEXT) to "run".
 858
 859 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 860
 861         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 862         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 863         implemented.  In call to create_map, pad length argument to 8k.
 864
 865 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 866
 867         * configure.ac: Add explicit sh64 case.
 868         * configure: Regenerate.
 869
 870 2005-03-30  Paul Brook  <paul@codesourcery.com>
 871
 872         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 873
 874 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 875
 876         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 877         include cgen-ops.h in decodev10.c and decodev32.c.
 878         * cris/sim-main.h: Don't include cgen-ops.h here.
 879         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 880         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 881         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 882         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 883         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 884         cris/semcrisv32f-switch.c: Regenerate.
 885
 886         * cris/traps.c (cris_break_13_handler) <case
 887         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 888         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 889
 890 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 891
 892         * cris/configure: Regenerate.
 893
 894 2005-02-28  Jim Blandy  <jimb@redhat.com>
 895
 896         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 897         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 898         Regenerated, after change to common/aclocal.m4.
 899
 900 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 901
 902         * iq2000: New target subdirectory.
 903         * configure.ac: Add iq2000 target.
 904         * configure: Regenerate.
 905
 906 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 907
 908         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 909         (realclean, install): Fail if subdir make failed.
 910
 911 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 912
 913         * cris: New directory, simulator for Axis Communications CRIS
 914         including CRIS v32, CGEN-based.
 915         * configure.ac: Add corresponding configury.
 916         * configure: Regenerate.
 917
 918 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 919
 920         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 921         common directory.  Remove sparc*-*-* from list.
 922
 923 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 924
 925         * Makefile.in (autoconf-common autoheader-common): Add --force to
 926         autoconf and autoheader.
 927         (autoconf-common autoheader-common)
 928         (autoconf-install autoheader-install): Check for configure.ac, not
 929         configure.in.
 930         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 931         * configure: Re-generate.
 932
 933 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 934
 935         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 936         correctly calls AC_CONFIG_SUBDIRS.
 937         * configure: Re-generate.
 938
 939 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 940
 941         * i960, h8500: Delete directory.
 942
 943 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 944
 945         * d30v, fr30, mn10200, z8k: Delete directory.
 946
 947 2004-03-10  Ben Elliston  <bje@gnu.org>
 948
 949         * MAINTAINERS: Update my mail address.
 950
 951 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 952
 953         * configure.in (mips*-*-*): Configure in testsuite.
 954         * configure: Regenerate.
 955
 956 2003-10-08  Dave Brolley  <brolley@redhat.com>
 957
 958         * configure.in: Move frv handling to alphabetically correct placement.
 959
 960 2003-09-03  Andreas Schwab  <schwab@suse.de>
 961
 962         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 963
 964 2003-08-29  Dave Brolley  <brolley@redhat.com>
 965
 966         * MAINTAINERS: Add myself as maintainer of the FRV port.
 967
 968 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 969             Dave Brolley  <brolley@redhat.com>
 970
 971         * frv/: New directory, simulator for the Fujitsu FRV.
 972         * configure.in: Add frv configury.
 973         * configure: Regenerate.
 974
 975 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 976
 977         * MAINTAINERS: Update my mail address.
 978
 979 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 980
 981         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 982         maintenance.  List igen and sh maintainers.  Mention that target
 983         and global maintainers pick up the slack.
 984
 985 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 986
 987         * configure.in: Add testsuite to extra_subdirs for sh.
 988         * configure: Regenerate.
 989
 990 2003-01-23  Nick Clifton  <nickc@redhat.com>
 991
 992         * Add sh2e support:
 993
 994 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 995
 996         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 997
 998 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 999
1000         * MAINTAINERS: Update my email address.
1001
1002 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1003
1004         * w65/: Delete directory.
1005
1006 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1007
1008         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1009         * configure: Re-generate.
1010
1011 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1012
1013         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1014         * configure: Re-generate.
1015
1016 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1017
1018         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1019         id, date and host to be overriden by NAME, ID, DATE and HOST
1020         respectfully.  Use ISO dates.
1021
1022 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1023
1024         * Makefile.in (ChangeLog): New makefile variable.
1025         * README-HACKING: Mention the ChangeLog makefile variable.
1026
1027 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1028
1029         * tic80/: Delete directory.
1030
1031 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1032
1033         * MAINTAINERS: Update my email address.
1034
1035 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1036
1037         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1038
1039 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1040
1041         * MAINTAINERS: Record self as a co-maintainer of just common/.
1042
1043 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1044
1045         * MAINTAINERS: Point to GDB files describing overall maintaince
1046         and check-in procedures.
1047
1048 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1049
1050         * MAINTAINERS: Add myself for ARM portions.
1051
1052 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1053
1054         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1055         * configure: Re-generate.
1056
1057 2001-02-16  Ben Elliston  <bje@redhat.com>
1058
1059         * MAINTAINERS: Add myself for common portions.
1060
1061 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1062
1063         * MAINTAINERS: Added self and Andrew for the mips sim.
1064
1065 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1066
1067         * MAINTAINERS: Added self and Andrew for the ppc sim.
1068
1069 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1070
1071         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1072         * m68hc11: New directory.
1073         * configure.in: Add.
1074         * configure: Regenerate.
1075
1076 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1077
1078         * tic80: New directory.
1079         * configure.in: Add configury.
1080         * configure: Regenerate.
1081
1082 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1083
1084         * configure.in (extra_subdirs): Add testsuite to strongarm
1085         directories.
1086         * configure: Regenerate.
1087
1088 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1089
1090         * MAINTAINERS: New file.  Blank.
1091
1092 1999-11-18  Ben Elliston  <bje@cygnus.com>
1093
1094         * configure.in: Require autoconf 2.13 and remove obsolete
1095         invocation of AC_C_CROSS.
1096         * configure: Regenerate.
1097
1098 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1099
1100         * configure.in: Configure the testsuite directory for thumb.
1101         * configure: Regenerate.
1102
1103 1999-07-16  Ben Elliston  <bje@cygnus.com>
1104
1105         * configure.in: Configure the testsuite directory for arm.
1106         * configure: Regenerate.
1107
1108 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1109
1110         * configure.in: Add support for MCore target.
1111         * configure: Regenerate.
1112
1113 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1114
1115         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1116         RUNTEST instead of commenting out, fixes portability problem.
1117
1118 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1119
1120         * configure.in: Add support for StrongARM target.
1121         * configure: Regenerate.
1122
1123 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1124
1125         * configure.in: Require autoconf 2.12.1 or higher.
1126
1127 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1128
1129         * configure.in (i960-*-*): Add.
1130         * configure: Rebuild.
1131
1132 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1133
1134         * configure.in: Added case for fr30-*-*.
1135         * configure: Regenerated.
1136
1137 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1138
1139         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1140         to allow successful operation on Windows.
1141
1142 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1143
1144         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1145         check can be invoked recursively.
1146
1147 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1148
1149         * configure.in: Build simulator on sparclite and sparc86x targets.
1150         * configure: Regenerate.
1151
1152 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1153
1154         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1155         to autoconf and autoheader.
1156
1157 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1158
1159         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1160         ../common' to autoconf and autoheader.  Unconditionally run
1161         autoconf in every subdir.
1162         (autoconf-changelog autoheader-changelog): Unconditionally run
1163         commands in every subdir.
1164         (autoconf-install autoheader-install): Likewise.
1165
1166 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1167
1168         * Makefile.in:  Get SHELL from configure.
1169         * (FLAGS_TO_PASS):  Pass down SHELL.
1170         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1171         NT native builds.
1172
1173 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1174
1175         * configure.in (extra_subdirs): Enable igen for mn10300.
1176         * configure: Re-generate.
1177
1178 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1179
1180         * configure.in (extra_subdirs): Add support for thumb target.
1181
1182         * configure (extra_subdirs): Add support for thumb target.
1183
1184 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1185
1186         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1187         target.
1188         * configure: Regenerate.
1189
1190 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1191
1192         * configure.in (extra_subdirs): v850ea needs igen.
1193         * configure: Re-generate.
1194
1195 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1196
1197         * configure.in (testdir): When a testsuite directory, add that to
1198         the list of confdirs.
1199
1200 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1201
1202         * configure.in (extra_subdirs): Enable igen ready for V850.
1203
1204 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1205
1206         * configure.in (w65-*-*, only_if_enabled): Set.
1207         * configure: Re-generate.
1208
1209 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1210
1211         * configure.in (sparc*-*-*, only_if_enabled): Set
1212         only_if_enabled=yes.  Check only_if_enabled before enabling a
1213         simulator.
1214         * configure: Regenerate.
1215
1216 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1217
1218         * configure.in (extra_subdirs): Add v850e target.
1219
1220 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1221
1222         * configure.in (extra_subdirs): Add v850ea target.
1223
1224 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1225
1226         * configure.in (sparc*-*-*): Don't build erc32.
1227         * configure: Regenerate.
1228
1229 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1230
1231         * configure.in (m32r-*-*): New target.
1232         * configure: Regenerate.
1233
1234         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1235
1236 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1237
1238         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1239         thought that .NOEXPORT was the default target.
1240
1241 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1242
1243         * Makefile.in (clean mostlyclean): Restore targets accidentally
1244         deleted in earlier change.
1245
1246 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1247
1248         * Makefile.in (autoheader-common, autoheader-changelog,
1249         autoheader-install): Perform autoheader in addition to autoconf.
1250
1251 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1252
1253         * Makefile.in (autoconf-install): New target.
1254         (autoconf-changelog): Try different way to obtain user name.
1255
1256 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1257
1258         * Makefile.in (autoconf-changelog): New target, update
1259         ChangeLog for all subdirectories - normally used after
1260         autoconf-common target.
1261
1262 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1263
1264         * configure.in (extra_subdirs): Include testsuite for d30v.
1265         * configure: Regenerate.
1266
1267         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1268         ../gdb/Makefile.in
1269         (check): New rules - drive the testsuite.
1270
1271 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1272
1273         * configure.in: Add mn10200 configure lines accidentally
1274         removed.
1275         * configure: Regenerated.
1276
1277 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1278
1279         * configure.in (extra_subdirs): Generalize common sub directory
1280         into a list.
1281         (extra_subdirs): For d30v add igen to the list to be built.
1282
1283 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1284
1285         * configure.in (d30v): New target.
1286         * configure: Regenerated.
1287
1288 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1289
1290         * configure.in: Don't require GCC to build the mn10200
1291         simulator anymore.
1292         * configure: Rebuilt.
1293
1294 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1295
1296         * configure.in: Don't configure any subdirs if no simulator
1297         is being built.  Don't use erc32 for sparc64.
1298         * configure: Regenerated.
1299
1300 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1301
1302         * Makefile.in (autoconf-common): New target.
1303         * configure.in: Do configure common.
1304         * configure: Regenerated.
1305
1306 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1307
1308         * configure configure.in:  Don't configure common anymore.  Files
1309         from common are now built in the individual simualtor directories.
1310         This fixes problems with the WinGDB build procedure.
1311
1312 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1313
1314         * configure: Enable the mn10200 simulator.
1315
1316 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1317
1318         * configure.in (configdirs): Add common.
1319         * configure: Regenerated.
1320
1321 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1322
1323         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1324         system V based targets.
1325         * configure: Regenerate.
1326
1327 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1328
1329         * configure.in (--enable-sim-powerpc): Delete.
1330         (--enable-sim): Add.
1331         * configure: Regenerated.
1332
1333 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1334
1335         * configure.in: Only build the V850 simulator if
1336         we are using gcc.
1337         * configure: Rebuild.
1338
1339 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1340
1341         * configure.in: Do build erc32 for DOS and Windows hosts.
1342         * configure: Rebuild.
1343
1344 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1345
1346         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1347         be inherited from the parent.  Remove INSTALL_XFORM and
1348         INSTALL_XFORM1.  Make INSTALL be set from configure.
1349
1350 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1351
1352         * configure.in: Only build the MIPS simulator if we are using
1353         gcc.
1354         * configure: Rebuild.
1355
1356 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1357
1358         * configure.in (v850-*-*): Added V850 simulator.
1359
1360 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1361
1362         * configure.in (d10v-*-*): Added D10V simulator.
1363
1364 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1365
1366         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1367         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1368         (docdir): Removed.
1369         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1370         (AC_PROG_INSTALL): Added.
1371         * configure: Rebuilt.
1372
1373 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1374
1375         * configure.in: Only configure erc32 if using gcc.
1376         * configure: Rebuild.
1377
1378 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1379
1380         * configure.in (sim_target): Build PowerPC simulator for powerpc
1381         System V.4, Solaris, and Elf targets.
1382         * configure: Regenerate with autoconf 2.10.
1383
1384 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1385
1386         * configure.in: Only built erc32 simulator on Unix hosts as it
1387         uses pseudo ttys.
1388         * configure: Regenerated with autoconf 2.8.
1389
1390 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1391
1392         * erc32: Sparc simulator from the ESA.
1393
1394 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1395
1396         From: Miles Bader  <miles@gnu.ai.mit.edu>
1397         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1398         * configure: Regenerate using autoconf.
1399
1400 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1401
1402         * Makefile.in (install): Fix typo.
1403
1404 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1405
1406         * configure: Regenerate with autoconf 2.7.
1407
1408         * Makefile.in (all): Simplify.
1409         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1410         as in the all target.
1411         (distclean, maintainer-clean, realclean): Likewise.
1412         (install): Likewise.
1413
1414 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1415
1416         * Makefile.in (all): Remove extra '\' char from shell script.
1417
1418 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1419
1420         * Makefile.in (all): Avoid a for loop with zero elements, even if
1421         the loop will not be executed because of an if statement.
1422
1423 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1424
1425         * Makefile.in (install): Add missing semicolon in "fi \".
1426
1427 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1428
1429         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1430         defaults from configure.
1431
1432         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1433         configure defaults.
1434         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1435         if either --enable-sim-powerpc is used, or the host compiler is
1436         GCC.
1437
1438 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1439
1440         * configure.in (mips*-*-*): Added "mips" simulator target.
1441         * configure: Re-generated.
1442
1443 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1444
1445         * Makefile.in (BISON): Remove macro.
1446         (FLAGS_TO_PASS): Remove BISON.
1447
1448 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1449
1450         * configure.in:  Explicitly `exit 0' for broken shells.
1451         * configure:  Rebuilt.
1452
1453 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1454
1455         * common/run.c (main): Initialize the callbacks.
1456
1457 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1458
1459         * Makefile.in (maintainer-clean): New synonym for realclean.
1460
1461 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1462
1463         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1464         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1465
1466 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1467
1468         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1469         <cagney@highland.com.au>.
1470         * configure: Regnerate from configure.in.
1471
1472 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1473
1474         * Update all FSF addresses except those in COPYING* files.
1475
1476 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1477
1478         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1479         submakes either default or passed in value.
1480
1481 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1482
1483         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1484           install): Changed targets so that they descend all
1485           subdirectories in $(SUBDIRS).
1486           (*-all, *-clean, *-install): Removed targets.
1487
1488         * configure.in: Don't bother with target makefile fragments, they
1489           are no longer needed.
1490         * configure: regenerated.
1491
1492         * Makefile.in, configure.in: converted to autoconf.
1493         * configure: New file, generated with autconf 2.4.
1494
1495 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1496
1497         * Makefile.in: Support ARM.
1498         * configure.in: Ditto.
1499
1500 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1501
1502         * Makefile.in: Support W65.
1503         * configure.in: Ditto.
1504
1505 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1506
1507         * Makefile.in: Add TAGS target.
1508
1509 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1510
1511         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1512           install-h8300, clean-h8300, all-h8500, install-h8500,
1513           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1514           recursion lines.
1515
1516 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1517
1518         * Makefile.in: remove endian.h trace from h8500
1519
1520 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1521
1522         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1523
1524 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1525
1526         * Makefile.in: make all of the all-* target (except all-nothing)
1527         depend on endian.h, so that if we're not building a simulator, we
1528         don't built endian
1529
1530 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1531
1532         * Makefile.in (check, installcheck): Added dummy targets.
1533
1534 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1535
1536         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1537         explicitly make it, since some makes apparently don't work with
1538         VPATH and .c to executable rules (SunOS make for example).
1539
1540 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1541
1542         * Makefile.in (endian): Add explicit rule for broken makes.
1543
1544 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1545
1546         * Makefile.in (info, install-info): New targets.
1547         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1548         level Makefile.
1549
1550 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1551
1552         * Makefile.in (endian.h): build endian.h via a temporary file so
1553           that we don't leave an incomplete file lying around on
1554           interrupted builds.
1555           (clean): remove endian, e.h, and endian.h.
1556
1557 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1558
1559         * Makefile.in, configure.in: if target isn't supported, build a
1560         harmless makefile.
1561
1562