sim/ChangeLog

   1 2009-11-22  Doug Evans  <dje@sebabeach.org>
   2
   3         * cris/cpuall.h: Regenerate.
   4         * cris/cpuv10.h: Regenerate.
   5         * cris/cpuv32.h: Regenerate.
   6         * cris/decodev10.c: Regenerate.
   7         * cris/decodev10.h: Regenerate.
   8         * cris/decodev32.c: Regenerate.
   9         * cris/decodev32.h: Regenerate.
  10
  11 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  12
  13         * avr/interp.c (sim_write): Allow byte access.
  14         (sim_read): Ditto.
  15
  16 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  17
  18         * avr/interp.c (sim_load): Clear memory before loading.
  19
  20 2009-11-09  Tristan Gingold  <gingold@adacore.com>
  21
  22         * avr/interp.c (sim_resume): Fix typo for OP_ret.
  23
  24 2009-10-23  Doug Evans  <dje@sebabeach.org>
  25
  26         * cris/arch.c: Regenerate.
  27         * cris/arch.h: Regenerate.
  28         * cris/cpuall.h: Regenerate.
  29         * cris/cpuv10.c: Regenerate.
  30         * cris/cpuv10.h: Regenerate.
  31         * cris/cpuv32.c: Regenerate.
  32         * cris/cpuv32.h: Regenerate.
  33         * cris/cris-desc.c: Regenerate.
  34         * cris/cris-desc.h: Regenerate.
  35         * cris/cris-opc.h: Regenerate.
  36         * cris/decodev10.c: Regenerate.
  37         * cris/decodev10.h: Regenerate.
  38         * cris/decodev32.c: Regenerate.
  39         * cris/decodev32.h: Regenerate.
  40         * cris/modelv10.c: Regenerate.
  41         * cris/modelv32.c: Regenerate.
  42         * cris/semcrisv10f-switch.c: Regenerate.
  43         * cris/semcrisv32f-switch.c: Regenerate.
  44
  45 2009-10-22  Tristan Gingold  <gingold@adacore.com>
  46
  47         * avr/interp.c (sim_stop): Return 1.
  48
  49 2009-10-16  Doug Evans  <dje@sebabeach.org>
  50
  51         * MAINTAINERS: Add myself as m32r maintainer.
  52
  53 2009-10-15  Michael Egaer  <eager@eagercon.com>
  54
  55         * MAINTAINERS: Add self as MicroBlaze maintainer.
  56
  57 2009-10-14  Ben Elliston  <bje@gnu.org>
  58
  59         * MAINTAINERS (common): Move myself to "past maintainers" section.
  60
  61 2009-10-06  Michael Eager  <eager@eagercon.com>
  62
  63         * microblaze/interp.c: Add include microblaze-dis.h.
  64
  65 2009-09-23  Michael Eager  <eager@eagercon.com>
  66
  67         * configure: Add microblaze-*.* (not regenerated).
  68         * configure.ac: Likewise.
  69         * microblaze/config.in: New.
  70         * microblaze/configure: Generate.
  71         * microblaze/configure.ac: New.
  72         * microblaze/interp.c: New.
  73         * microblaze/Makefile.in: New.
  74         * microblaze/microblaze.h: New.
  75         * microblaze/microblaze.isa: New.
  76         * microblaze/sim-main.h: New.
  77         * microblaze/sysdep.h: New.
  78
  79 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  80
  81         * avr/config.in: Regenerate.
  82         * avr/configure: Likewise.
  83         * configure: Likewise.
  84         * cris/config.in: Likewise.
  85         * cris/configure: Likewise.
  86
  87         * configure.ac: m4_include toplevel config/override.m4.
  88         * configure: Regenerate.
  89         * avr/configure: Regenerate.
  90         * cris/configure: Regenerate.
  91
  92 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  93
  94         * Makefile.in (datarootdir): New variable.
  95
  96 2009-05-18  Jon Beniston <jon@beniston.com>
  97
  98         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
  99         * configure.ac: Add lm32 target.
 100         * lm32: New directory.
 101
 102 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 103
 104         * MAINTAINERS: Orphan ppc.
 105
 106 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 107
 108         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 109         m32c_signal_to_target.  Change signal return values from SIGILL,
 110         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 111         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 112
 113 2009-04-30  Anthony Green  <green@moxielogic.com>
 114
 115         * MAINTAINERS: Add myself for the moxie port.
 116         * moxie: New directory.
 117         * configure.ac: Add entry for moxie.
 118         * configure: Regenerate.
 119
 120 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 121
 122         * avr: New directory.
 123         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 124         * avr/config.in: New file, generated by autoheader.
 125         * avr/configure: New file generated by autoconf.
 126         * configure.ac: Add avr.
 127         * configure: Regenerated.
 128
 129 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 130
 131         * Makefile.in: Add dummy install-pdf, html, and
 132         install-html targets.
 133
 134 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 135
 136         * cris/sim-if.c: Include errno.h.
 137         (cris_start_address, cris_program_offset): New variables.
 138         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 139         enums.
 140         (cris_options): New options --cris-program-offset and
 141         --cris-start-address.
 142         (cris_option_handler): Handle new options.
 143         (cris_program_offset_write, cris_set_section_offset_iterator)
 144         (cris_offset_sections, cris_offset_sections): New functions.
 145         (sim_load): Use cris_program_offset_write as function argument to
 146         cris_load_elf_file, not sim_write.
 147         (struct offsetinfo): New struct.
 148         (cris_handle_interpreter): Fix typo in comment.
 149         (sim_open): Call cris_offset_sections as soon as the bfd of the
 150         infile is available.  Gate bfd validity checks on abfd non-NULL.
 151         (sim_create_inferior): Let cris_start_address when != -1 override
 152         other start-address choices.
 153
 154 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 155
 156         * cris/traps.c (abort): Define to call sim_io_error.
 157         (create_map): Make -1 imply a non-fixed address, not 0.  All
 158         callers changed.  Only prefer the next higher unmapped address if
 159         the last mapped address is no less than 0x40000000.  Check that
 160         the address to be mapped is not already mapped.  Update head
 161         comment.
 162         (unmap_pages): Don't call abort when recursive call fails, just
 163         note and return an error if a page in the range couldn't be unmapped.
 164         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 165         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 166         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 167         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 168         don't abort on page not being mapped.  Handle non-anon filemap
 169         with length padded to pagesize.
 170
 171 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 172
 173         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 174         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 175         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 176         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 177         (TARGET_AT_CLKTCK): Remove redundant macros.
 178         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 179         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 180         callers.
 181         (sim_open): Also pass AT_SECURE.
 182
 183         * cris/sim-main.h (struct _sim_cpu): New member
 184         set_target_thread_data.
 185         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 186         * cris/crisv10f.c: Ditto.
 187         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 188         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 189         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 190         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 191         case.
 192
 193         * cris/traps.c (TARGET_SYS_exit_group): Define.
 194         (cris_break_13_handler): Handle it like the exit for the last
 195         thread.
 196
 197         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 198         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 199         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 200         2.6.27.  Set machine field to the BFD printable name of the
 201         machine.
 202
 203         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 204         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 205         TARGET_MAP_DENYWRITE.
 206
 207         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 208         (TARGET_X_OK, TARGET_F_OK): Define.
 209         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 210
 211         * cris/semcrisv32f-switch.c: Regenerate.
 212
 213 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 214
 215         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 216         just a short CRIS-specific notice.  Tweak the wording for a
 217         failing architecture test.
 218
 219         * cris/traps.c (TARGET_SYS_writev): New macro.
 220         (is_mapped_only, cris_dump_map): New functions.
 221         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 222         and prot combinations and a non-zero page-offset.  If
 223         TARGET_MAP_FIXED, unmap pages before mapping them.
 224         <case TARGET_SYS_mprotect>: When checking, allow any length
 225         argument.  Don't actually do anything.
 226         <case TARGET_SYS_writev>: New case.
 227
 228         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 229         * cris/sim-if.c: Include elf-bfd.h.
 230         (struct progbounds): New members end_loadmem, start_nonloadmem.
 231         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 232         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 233         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 234         static.  Update head comment.  Set new struct progbounds members.
 235         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 236         variables.
 237         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 238         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 239         functions.
 240         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 241         handling to use auxv_entries.  Improve error message and checking
 242         for invalid programs.  Use new variable abfd for the program
 243         instead of for each access reaching into sd to get it.
 244         (sim_create_inferior): If non-zero, use interp_start_addr instead
 245         of the program start address.
 246         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 247         stale comment.  Always specify little-endian.
 248
 249 2008-07-29  Nick Clifton  <nickc@redhat.com>
 250
 251         * common/genmloop.sh: Add new parameter: -shell to specify the
 252         command interpreter to use to run the input file.  This is
 253         necessary because otherwise SHELL is taken from the user's
 254         environment, and not from the makefile that invoked this script
 255         and the user might not be running an sh-like shell.
 256         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 257         * fr30/Makefile.in: Likewise.
 258         * frv/Makefile.in: Likewise.
 259         * i960/Makefile.in: Likewise.
 260         * iq2000/Makefile.in: Likewise.
 261         * m32r/Makefile.in: Likewise.
 262
 263         * frv/mloop.in: Add missing start of line comment marker.
 264
 265 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 266
 267         * cris/configure: Regenerate to track ../common/common.m4 changes.
 268         * cris/config.in: Ditto.
 269
 270 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 271             Daniel Jacobowitz  <dan@codesourcery.com>
 272             Joseph Myers  <joseph@codesourcery.com>
 273
 274         * cris/configure: Regenerate.
 275
 276 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 277
 278         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 279
 280 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 281
 282         * MAINTAINERS: Add myself as maintainer of cr16 port.
 283
 284 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 285
 286         Add simulator for National cr16 processor.
 287         * cr16: New directory.
 288         * configure.ac: Add entry for National cr16.
 289         * configure: Regenerate.
 290
 291 2008-02-05  DJ Delorie  <dj@redhat.com>
 292
 293         * configure.ac (v850): V850 now has a testsuite.
 294         * configure (v850): Likewise.
 295
 296 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 297
 298         Updated copyright notices for most files.
 299
 300 2007-12-19  DJ Delorie  <dj@redhat.com>
 301
 302         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 303         cut_point.
 304
 305 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 306
 307         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 308         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 309         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 310         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 311         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 312         cris/semcrisv32f-switch.c: Regenerate.
 313
 314 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 315
 316         Switch the license of all files explicitly copyright the FSF
 317         to GPLv3.
 318
 319 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 320
 321         * Makefile.in: Add dummy "pdf" target.
 322
 323 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 324
 325         * cris/traps.c (dump_statistics): Change format for cycle numbers
 326         to %llu and cast parameters to unsigned long long.
 327
 328 2007-02-16  Thiemo Seufer  <ths@mips.com>
 329
 330         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 331
 332 2007-01-28  Manuel Lauss  <slauss@resi.at>
 333
 334         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 335         (sh-*-*): Change to sh*-*-*.
 336         * configure: Regenerated.
 337
 338 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 339
 340         Updated copyright notices for most files.
 341
 342 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 343
 344         * Makefile.in (autoconf-common autoheader-common): Only run
 345         autoheader on subdirs with a file config.in.
 346
 347         * configure.ac (common): Make the default "yes" for all targets
 348         with sim subdirs.
 349         * configure: Regenerate.
 350
 351         * Makefile.in (autoconf-common autoheader-common): In documented
 352         usage, say SHELL=/bin/sh.
 353         (.PHONY): Add autoheader-common.
 354
 355         * MAINTAINERS: Add self as authorized committer for *.
 356
 357 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 358             Hans-Peter Nilsson  <hp@axis.com>
 359
 360         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 361         (cris_unknown_syscall_action): Declare.
 362         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 363         (cris_options): Add cris-unknown-syscall option.
 364         (cris_option_handler): Correct comment about and error message for
 365         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 366         * cris/traps.c: Include stdarg.h
 367         (cris_unknown_syscall): New function.
 368         (cris_break_13_handler): Instead of sim_io_eprintf and
 369         sim_engine_halt, call cris_unknown_syscall to handle more or less
 370         unknown syscalls.  Adjust code as necessary to handle return
 371         value.
 372
 373 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 374
 375         * MAINTAINERS: Add Dave Brolley for sh64.
 376
 377 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 378
 379         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 380         (cris_pipe_empty): Correct initialization of "remaining".  Only
 381         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 382         are written.
 383
 384 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 385
 386         * cris/configure.ac: Check for limits.h and sys/param.h.
 387         * cris/configure, cris/config.in: Rebuild.
 388         * cris/traps.c (SIM_PATHMAX): New macro.
 389         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 390
 391 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 392
 393         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 394         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 395         * configure: Regenerated.
 396
 397 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 398
 399         * cris/configure: Regenerated.
 400
 401 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 402
 403         * cris/configure: Regenerated.
 404
 405 2006-05-05  Andreas Schwab  <schwab@suse.de>
 406
 407         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 408         * configure: Regenerate.
 409
 410         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 411         (CC_FOR_BUILD): Don't override.
 412         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 413
 414 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 415
 416         * MAINTAINERS: Add an "Authorized committers" section, and list
 417         DJ Delorie for v850.
 418
 419 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 420
 421         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 422
 423 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 424
 425         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 426         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 427         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 428         (all): Depend on rvdummy$(EXEEXT).
 429         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 430         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 431         default off.
 432         * cris/configure: Regenerate.
 433         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 434         (enum cris_interrupt_type, crisv10deliver_interrupt)
 435         (crisv32deliver_interrupt: New declarations.
 436         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 437         sim_events_tickn and set state-events member work_pending when it's
 438         time for the next event.
 439         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 440         interrupt-delivery function.
 441         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 442         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 443         * cris/devices.c: Include hw-device.h.
 444         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 445         (device_io_write_buffer): Only perform 0x900000xx-functions if
 446         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 447         call hw_io_write_buffer.  Add return 0 last in function.
 448         * cris/sim-if.c (cris_have_900000xxif): Now global.
 449         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 450         Force "-model" option, effectively.
 451         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 452         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 453
 454 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 455
 456         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 457         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 458         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 459
 460 2006-03-13  DJ Delorie  <dj@redhat.com>
 461
 462         * MAINTAINERS: Add self as m32c sim maintainer.
 463
 464 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 465
 466         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 467         mapping.
 468         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 469
 470 2006-01-23  Jim Blandy  <jimb@redhat.com>
 471
 472         Add simulator for Renesas M32C and M16C.
 473
 474         * m32c: New directory.
 475         * configure.ac: Add entry for Renesas M32C.
 476         * configure: Regenerate.
 477
 478 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 479
 480         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 481         cycle count for the current insn.
 482
 483 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 484
 485         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 486         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 487         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 488         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 489
 490 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 491
 492         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 493         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 494         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 495         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 496         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 497         cris/semcrisv32f-switch.c: Regenerate.
 498
 499 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 500
 501         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 502         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 503         TARGET_O_WRONLY.
 504         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 505         F_GETFL on fd 0, 1 and 2.
 506
 507 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 508
 509         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 510         last_open_fd, last_open_flags.
 511         * cris/traps.c: Don't include targ-vals.h.
 512         (TARGET_O_ACCMODE): Define.
 513         (cris_break_13_handler): Set new _sim_cpu members.
 514         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 515         Rearrange code as switch.  Emit "unimplemented" abort for
 516         unimplemented fcntl calls.
 517
 518         * cris/traps.c (TARGET_SYS_stat): Define.
 519         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 520         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 521
 522 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 523
 524         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 525         low 32 bits are used after an unsigned long cast.
 526
 527 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 528
 529         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 530
 531 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 532
 533         * MAINTAINERS: Update my mail address, move myself to the
 534         "Past maintainers" section.
 535
 536 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 537
 538         * configure.ac: Add igen to v850 build.
 539         * configure: Regenerate.
 540
 541 2005-04-29  Paul Brook  <paul@codesourcery.com>
 542
 543         * common/callback.c (PIPE_BUF): Provide default definition.
 544         (os_lstat): Use stat if lstat is not available on the host.
 545         (os_ftruncate): Return EINVAL if not available on the host.
 546         (os_truncate): Ditto.
 547         * common/configure.ac: Check for lstat, truncate and ftruncate.
 548         * common/configure: Regenerate.
 549         * common/config.in: Regenerate.
 550
 551 2005-04-27  Paul Brook  <paul@codesourcery.com>
 552
 553         * common/Make-common.in: Add $(EXEEXT) to "run".
 554
 555 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 556
 557         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 558         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 559         implemented.  In call to create_map, pad length argument to 8k.
 560
 561 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 562
 563         * configure.ac: Add explicit sh64 case.
 564         * configure: Regenerate.
 565
 566 2005-03-30  Paul Brook  <paul@codesourcery.com>
 567
 568         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 569
 570 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 571
 572         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 573         include cgen-ops.h in decodev10.c and decodev32.c.
 574         * cris/sim-main.h: Don't include cgen-ops.h here.
 575         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 576         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 577         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 578         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 579         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 580         cris/semcrisv32f-switch.c: Regenerate.
 581
 582         * cris/traps.c (cris_break_13_handler) <case
 583         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 584         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 585
 586 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 587
 588         * cris/configure: Regenerate.
 589
 590 2005-02-28  Jim Blandy  <jimb@redhat.com>
 591
 592         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 593         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 594         Regenerated, after change to common/aclocal.m4.
 595
 596 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 597
 598         * iq2000: New target subdirectory.
 599         * configure.ac: Add iq2000 target.
 600         * configure: Regenerate.
 601
 602 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 603
 604         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 605         (realclean, install): Fail if subdir make failed.
 606
 607 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 608
 609         * cris: New directory, simulator for Axis Communications CRIS
 610         including CRIS v32, CGEN-based.
 611         * configure.ac: Add corresponding configury.
 612         * configure: Regenerate.
 613
 614 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 615
 616         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 617         common directory.  Remove sparc*-*-* from list.
 618
 619 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 620
 621         * Makefile.in (autoconf-common autoheader-common): Add --force to
 622         autoconf and autoheader.
 623         (autoconf-common autoheader-common)
 624         (autoconf-install autoheader-install): Check for configure.ac, not
 625         configure.in.
 626         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 627         * configure: Re-generate.
 628
 629 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 630
 631         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 632         correctly calls AC_CONFIG_SUBDIRS.
 633         * configure: Re-generate.
 634
 635 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 636
 637         * i960, h8500: Delete directory.
 638
 639 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 640
 641         * d30v, fr30, mn10200, z8k: Delete directory.
 642
 643 2004-03-10  Ben Elliston  <bje@gnu.org>
 644
 645         * MAINTAINERS: Update my mail address.
 646
 647 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 648
 649         * configure.in (mips*-*-*): Configure in testsuite.
 650         * configure: Regenerate.
 651
 652 2003-10-08  Dave Brolley  <brolley@redhat.com>
 653
 654         * configure.in: Move frv handling to alphabetically correct placement.
 655
 656 2003-09-03  Andreas Schwab  <schwab@suse.de>
 657
 658         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 659
 660 2003-08-29  Dave Brolley  <brolley@redhat.com>
 661
 662         * MAINTAINERS: Add myself as maintainer of the FRV port.
 663
 664 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 665             Dave Brolley  <brolley@redhat.com>
 666
 667         * frv/: New directory, simulator for the Fujitsu FRV.
 668         * configure.in: Add frv configury.
 669         * configure: Regenerate.
 670
 671 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 672
 673         * MAINTAINERS: Update my mail address.
 674
 675 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 676
 677         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 678         maintenance.  List igen and sh maintainers.  Mention that target
 679         and global maintainers pick up the slack.
 680
 681 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 682
 683         * configure.in: Add testsuite to extra_subdirs for sh.
 684         * configure: Regenerate.
 685
 686 2003-01-23  Nick Clifton  <nickc@redhat.com>
 687
 688         * Add sh2e support:
 689
 690 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 691
 692         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 693
 694 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 695
 696         * MAINTAINERS: Update my email address.
 697
 698 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 699
 700         * w65/: Delete directory.
 701
 702 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 703
 704         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 705         * configure: Re-generate.
 706
 707 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 708
 709         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 710         * configure: Re-generate.
 711
 712 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 713
 714         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 715         id, date and host to be overriden by NAME, ID, DATE and HOST
 716         respectfully.  Use ISO dates.
 717
 718 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 719
 720         * Makefile.in (ChangeLog): New makefile variable.
 721         * README-HACKING: Mention the ChangeLog makefile variable.
 722
 723 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 724
 725         * tic80/: Delete directory.
 726
 727 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 728
 729         * MAINTAINERS: Update my email address.
 730
 731 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 732
 733         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 734
 735 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 736
 737         * MAINTAINERS: Record self as a co-maintainer of just common/.
 738
 739 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 740
 741         * MAINTAINERS: Point to GDB files describing overall maintaince
 742         and check-in procedures.
 743
 744 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 745
 746         * MAINTAINERS: Add myself for ARM portions.
 747
 748 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 749
 750         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 751         * configure: Re-generate.
 752
 753 2001-02-16  Ben Elliston  <bje@redhat.com>
 754
 755         * MAINTAINERS: Add myself for common portions.
 756
 757 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 758
 759         * MAINTAINERS: Added self and Andrew for the mips sim.
 760
 761 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 762
 763         * MAINTAINERS: Added self and Andrew for the ppc sim.
 764
 765 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 766
 767         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 768         * m68hc11: New directory.
 769         * configure.in: Add.
 770         * configure: Regenerate.
 771
 772 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 773
 774         * tic80: New directory.
 775         * configure.in: Add configury.
 776         * configure: Regenerate.
 777
 778 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 779
 780         * configure.in (extra_subdirs): Add testsuite to strongarm
 781         directories.
 782         * configure: Regenerate.
 783
 784 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 785
 786         * MAINTAINERS: New file.  Blank.
 787
 788 1999-11-18  Ben Elliston  <bje@cygnus.com>
 789
 790         * configure.in: Require autoconf 2.13 and remove obsolete
 791         invocation of AC_C_CROSS.
 792         * configure: Regenerate.
 793
 794 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 795
 796         * configure.in: Configure the testsuite directory for thumb.
 797         * configure: Regenerate.
 798
 799 1999-07-16  Ben Elliston  <bje@cygnus.com>
 800
 801         * configure.in: Configure the testsuite directory for arm.
 802         * configure: Regenerate.
 803
 804 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 805
 806         * configure.in: Add support for MCore target.
 807         * configure: Regenerate.
 808
 809 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 810
 811         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 812         RUNTEST instead of commenting out, fixes portability problem.
 813
 814 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 815
 816         * configure.in: Add support for StrongARM target.
 817         * configure: Regenerate.
 818
 819 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 820
 821         * configure.in: Require autoconf 2.12.1 or higher.
 822
 823 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 824
 825         * configure.in (i960-*-*): Add.
 826         * configure: Rebuild.
 827
 828 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 829
 830         * configure.in: Added case for fr30-*-*.
 831         * configure: Regenerated.
 832
 833 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 834
 835         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 836         to allow successful operation on Windows.
 837
 838 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 839
 840         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 841         check can be invoked recursively.
 842
 843 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 844
 845         * configure.in: Build simulator on sparclite and sparc86x targets.
 846         * configure: Regenerate.
 847
 848 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 849
 850         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 851         to autoconf and autoheader.
 852
 853 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 854
 855         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 856         ../common' to autoconf and autoheader.  Unconditionally run
 857         autoconf in every subdir.
 858         (autoconf-changelog autoheader-changelog): Unconditionally run
 859         commands in every subdir.
 860         (autoconf-install autoheader-install): Likewise.
 861
 862 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 863
 864         * Makefile.in:  Get SHELL from configure.
 865         * (FLAGS_TO_PASS):  Pass down SHELL.
 866         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 867         NT native builds.
 868
 869 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 870
 871         * configure.in (extra_subdirs): Enable igen for mn10300.
 872         * configure: Re-generate.
 873
 874 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 875
 876         * configure.in (extra_subdirs): Add support for thumb target.
 877
 878         * configure (extra_subdirs): Add support for thumb target.
 879
 880 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 881
 882         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 883         target.
 884         * configure: Regenerate.
 885
 886 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 887
 888         * configure.in (extra_subdirs): v850ea needs igen.
 889         * configure: Re-generate.
 890
 891 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 892
 893         * configure.in (testdir): When a testsuite directory, add that to
 894         the list of confdirs.
 895
 896 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 897
 898         * configure.in (extra_subdirs): Enable igen ready for V850.
 899
 900 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 901
 902         * configure.in (w65-*-*, only_if_enabled): Set.
 903         * configure: Re-generate.
 904
 905 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 906
 907         * configure.in (sparc*-*-*, only_if_enabled): Set
 908         only_if_enabled=yes.  Check only_if_enabled before enabling a
 909         simulator.
 910         * configure: Regenerate.
 911
 912 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 913
 914         * configure.in (extra_subdirs): Add v850e target.
 915
 916 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 917
 918         * configure.in (extra_subdirs): Add v850ea target.
 919
 920 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 921
 922         * configure.in (sparc*-*-*): Don't build erc32.
 923         * configure: Regenerate.
 924
 925 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 926
 927         * configure.in (m32r-*-*): New target.
 928         * configure: Regenerate.
 929
 930         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 931
 932 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 933
 934         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 935         thought that .NOEXPORT was the default target.
 936
 937 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 938
 939         * Makefile.in (clean mostlyclean): Restore targets accidentally
 940         deleted in earlier change.
 941
 942 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 943
 944         * Makefile.in (autoheader-common, autoheader-changelog,
 945         autoheader-install): Perform autoheader in addition to autoconf.
 946
 947 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
 948
 949         * Makefile.in (autoconf-install): New target.
 950         (autoconf-changelog): Try different way to obtain user name.
 951
 952 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 953
 954         * Makefile.in (autoconf-changelog): New target, update
 955         ChangeLog for all subdirectories - normally used after
 956         autoconf-common target.
 957
 958 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 959
 960         * configure.in (extra_subdirs): Include testsuite for d30v.
 961         * configure: Regenerate.
 962
 963         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
 964         ../gdb/Makefile.in
 965         (check): New rules - drive the testsuite.
 966
 967 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
 968
 969         * configure.in: Add mn10200 configure lines accidentally
 970         removed.
 971         * configure: Regenerated.
 972
 973 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 974
 975         * configure.in (extra_subdirs): Generalize common sub directory
 976         into a list.
 977         (extra_subdirs): For d30v add igen to the list to be built.
 978
 979 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 980
 981         * configure.in (d30v): New target.
 982         * configure: Regenerated.
 983
 984 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
 985
 986         * configure.in: Don't require GCC to build the mn10200
 987         simulator anymore.
 988         * configure: Rebuilt.
 989
 990 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
 991
 992         * configure.in: Don't configure any subdirs if no simulator
 993         is being built.  Don't use erc32 for sparc64.
 994         * configure: Regenerated.
 995
 996 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
 997
 998         * Makefile.in (autoconf-common): New target.
 999         * configure.in: Do configure common.
1000         * configure: Regenerated.
1001
1002 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1003
1004         * configure configure.in:  Don't configure common anymore.  Files
1005         from common are now built in the individual simualtor directories.
1006         This fixes problems with the WinGDB build procedure.
1007
1008 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1009
1010         * configure: Enable the mn10200 simulator.
1011
1012 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1013
1014         * configure.in (configdirs): Add common.
1015         * configure: Regenerated.
1016
1017 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1018
1019         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1020         system V based targets.
1021         * configure: Regenerate.
1022
1023 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1024
1025         * configure.in (--enable-sim-powerpc): Delete.
1026         (--enable-sim): Add.
1027         * configure: Regenerated.
1028
1029 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1030
1031         * configure.in: Only build the V850 simulator if
1032         we are using gcc.
1033         * configure: Rebuild.
1034
1035 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1036
1037         * configure.in: Do build erc32 for DOS and Windows hosts.
1038         * configure: Rebuild.
1039
1040 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1041
1042         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1043         be inherited from the parent.  Remove INSTALL_XFORM and
1044         INSTALL_XFORM1.  Make INSTALL be set from configure.
1045
1046 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1047
1048         * configure.in: Only build the MIPS simulator if we are using
1049         gcc.
1050         * configure: Rebuild.
1051
1052 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1053
1054         * configure.in (v850-*-*): Added V850 simulator.
1055
1056 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1057
1058         * configure.in (d10v-*-*): Added D10V simulator.
1059
1060 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1061
1062         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1063         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1064         (docdir): Removed.
1065         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1066         (AC_PROG_INSTALL): Added.
1067         * configure: Rebuilt.
1068
1069 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1070
1071         * configure.in: Only configure erc32 if using gcc.
1072         * configure: Rebuild.
1073
1074 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1075
1076         * configure.in (sim_target): Build PowerPC simulator for powerpc
1077         System V.4, Solaris, and Elf targets.
1078         * configure: Regenerate with autoconf 2.10.
1079
1080 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1081
1082         * configure.in: Only built erc32 simulator on Unix hosts as it
1083         uses pseudo ttys.
1084         * configure: Regenerated with autoconf 2.8.
1085
1086 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1087
1088         * erc32: Sparc simulator from the ESA.
1089
1090 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1091
1092         From: Miles Bader  <miles@gnu.ai.mit.edu>
1093         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1094         * configure: Regenerate using autoconf.
1095
1096 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1097
1098         * Makefile.in (install): Fix typo.
1099
1100 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1101
1102         * configure: Regenerate with autoconf 2.7.
1103
1104         * Makefile.in (all): Simplify.
1105         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1106         as in the all target.
1107         (distclean, maintainer-clean, realclean): Likewise.
1108         (install): Likewise.
1109
1110 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1111
1112         * Makefile.in (all): Remove extra '\' char from shell script.
1113
1114 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1115
1116         * Makefile.in (all): Avoid a for loop with zero elements, even if
1117         the loop will not be executed because of an if statement.
1118
1119 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1120
1121         * Makefile.in (install): Add missing semicolon in "fi \".
1122
1123 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1124
1125         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1126         defaults from configure.
1127
1128         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1129         configure defaults.
1130         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1131         if either --enable-sim-powerpc is used, or the host compiler is
1132         GCC.
1133
1134 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1135
1136         * configure.in (mips*-*-*): Added "mips" simulator target.
1137         * configure: Re-generated.
1138
1139 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1140
1141         * Makefile.in (BISON): Remove macro.
1142         (FLAGS_TO_PASS): Remove BISON.
1143
1144 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1145
1146         * configure.in:  Explicitly `exit 0' for broken shells.
1147         * configure:  Rebuilt.
1148
1149 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1150
1151         * common/run.c (main): Initialize the callbacks.
1152
1153 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1154
1155         * Makefile.in (maintainer-clean): New synonym for realclean.
1156
1157 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1158
1159         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1160         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1161
1162 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1163
1164         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1165         <cagney@highland.com.au>.
1166         * configure: Regnerate from configure.in.
1167
1168 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1169
1170         * Update all FSF addresses except those in COPYING* files.
1171
1172 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1173
1174         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1175         submakes either default or passed in value.
1176
1177 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1178
1179         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1180           install): Changed targets so that they descend all
1181           subdirectories in $(SUBDIRS).
1182           (*-all, *-clean, *-install): Removed targets.
1183
1184         * configure.in: Don't bother with target makefile fragments, they
1185           are no longer needed.
1186         * configure: regenerated.
1187
1188         * Makefile.in, configure.in: converted to autoconf.
1189         * configure: New file, generated with autconf 2.4.
1190
1191 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1192
1193         * Makefile.in: Support ARM.
1194         * configure.in: Ditto.
1195
1196 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1197
1198         * Makefile.in: Support W65.
1199         * configure.in: Ditto.
1200
1201 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1202
1203         * Makefile.in: Add TAGS target.
1204
1205 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1206
1207         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1208           install-h8300, clean-h8300, all-h8500, install-h8500,
1209           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1210           recursion lines.
1211
1212 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1213
1214         * Makefile.in: remove endian.h trace from h8500
1215
1216 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1217
1218         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1219
1220 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1221
1222         * Makefile.in: make all of the all-* target (except all-nothing)
1223         depend on endian.h, so that if we're not building a simulator, we
1224         don't built endian
1225
1226 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1227
1228         * Makefile.in (check, installcheck): Added dummy targets.
1229
1230 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1231
1232         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1233         explicitly make it, since some makes apparently don't work with
1234         VPATH and .c to executable rules (SunOS make for example).
1235
1236 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1237
1238         * Makefile.in (endian): Add explicit rule for broken makes.
1239
1240 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1241
1242         * Makefile.in (info, install-info): New targets.
1243         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1244         level Makefile.
1245
1246 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1247
1248         * Makefile.in (endian.h): build endian.h via a temporary file so
1249           that we don't leave an incomplete file lying around on
1250           interrupted builds.
1251           (clean): remove endian, e.h, and endian.h.
1252
1253 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1254
1255         * Makefile.in, configure.in: if target isn't supported, build a
1256         harmless makefile.
1257
1258