sim/ChangeLog

   1 2010-02-11  Doug Evans  <dje@sebabeach.org>
   2
   3         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
   4         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
   5         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
   6         * cris/semcrisv32f-switch.c: Regenerate.
   7
   8 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
   9
  10         * avr/configure: Regenerate.
  11         * cris/configure: Regenerate.
  12         * microblaze/configure: Regenerate.
  13
  14 2010-01-02  Doug Evans  <dje@sebabeach.org>
  15
  16         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
  17         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
  18         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
  19         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
  20         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  21         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
  22
  23 2010-01-01  Doug Evans  <dje@sebabeach.org>
  24
  25         * cris/mloop.in: Fix copyright year update snafu.
  26
  27 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
  28
  29         * common/aclocal.m4: Add include of ../../config/zlib.m4.
  30         * common/common.m4: Use AM_ZLIB to check for zlib support.
  31         * ppc/configure.ac: Likewise.
  32         * arm/configure, avr/configure, common/configure, cr16/configure,
  33         cris/configure, d10v/configure, erc32/configure, frv/configure,
  34         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
  35         m32r/configure, m68hc11/configure, mcore/configure,
  36         microblaze/configure, mips/configure, mn10300/configure,
  37         moxie/configure, ppc/configure, sh/configure, sh64/configure,
  38         v850/configure: Regenerate.
  39
  40 2009-11-24  DJ Delorie  <dj@redhat.com>
  41
  42         * rx: New directory.
  43         * configure.ac: Add entry for Renesas RX.
  44         * configure: Regenerate.
  45
  46 2009-11-22  Doug Evans  <dje@sebabeach.org>
  47
  48         * cris/cpuall.h: Regenerate.
  49         * cris/cpuv10.h: Regenerate.
  50         * cris/cpuv32.h: Regenerate.
  51         * cris/decodev10.c: Regenerate.
  52         * cris/decodev10.h: Regenerate.
  53         * cris/decodev32.c: Regenerate.
  54         * cris/decodev32.h: Regenerate.
  55
  56 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  57
  58         * avr/interp.c (sim_write): Allow byte access.
  59         (sim_read): Ditto.
  60
  61 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  62
  63         * avr/interp.c (sim_load): Clear memory before loading.
  64
  65 2009-11-09  Tristan Gingold  <gingold@adacore.com>
  66
  67         * avr/interp.c (sim_resume): Fix typo for OP_ret.
  68
  69 2009-10-23  Doug Evans  <dje@sebabeach.org>
  70
  71         * cris/arch.c: Regenerate.
  72         * cris/arch.h: Regenerate.
  73         * cris/cpuall.h: Regenerate.
  74         * cris/cpuv10.c: Regenerate.
  75         * cris/cpuv10.h: Regenerate.
  76         * cris/cpuv32.c: Regenerate.
  77         * cris/cpuv32.h: Regenerate.
  78         * cris/cris-desc.c: Regenerate.
  79         * cris/cris-desc.h: Regenerate.
  80         * cris/cris-opc.h: Regenerate.
  81         * cris/decodev10.c: Regenerate.
  82         * cris/decodev10.h: Regenerate.
  83         * cris/decodev32.c: Regenerate.
  84         * cris/decodev32.h: Regenerate.
  85         * cris/modelv10.c: Regenerate.
  86         * cris/modelv32.c: Regenerate.
  87         * cris/semcrisv10f-switch.c: Regenerate.
  88         * cris/semcrisv32f-switch.c: Regenerate.
  89
  90 2009-10-22  Tristan Gingold  <gingold@adacore.com>
  91
  92         * avr/interp.c (sim_stop): Return 1.
  93
  94 2009-10-16  Doug Evans  <dje@sebabeach.org>
  95
  96         * MAINTAINERS: Add myself as m32r maintainer.
  97
  98 2009-10-15  Michael Egaer  <eager@eagercon.com>
  99
 100         * MAINTAINERS: Add self as MicroBlaze maintainer.
 101
 102 2009-10-14  Ben Elliston  <bje@gnu.org>
 103
 104         * MAINTAINERS (common): Move myself to "past maintainers" section.
 105
 106 2009-10-06  Michael Eager  <eager@eagercon.com>
 107
 108         * microblaze/interp.c: Add include microblaze-dis.h.
 109
 110 2009-09-23  Michael Eager  <eager@eagercon.com>
 111
 112         * configure: Add microblaze-*.* (not regenerated).
 113         * configure.ac: Likewise.
 114         * microblaze/config.in: New.
 115         * microblaze/configure: Generate.
 116         * microblaze/configure.ac: New.
 117         * microblaze/interp.c: New.
 118         * microblaze/Makefile.in: New.
 119         * microblaze/microblaze.h: New.
 120         * microblaze/microblaze.isa: New.
 121         * microblaze/sim-main.h: New.
 122         * microblaze/sysdep.h: New.
 123
 124 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 125
 126         * avr/config.in: Regenerate.
 127         * avr/configure: Likewise.
 128         * configure: Likewise.
 129         * cris/config.in: Likewise.
 130         * cris/configure: Likewise.
 131
 132         * configure.ac: m4_include toplevel config/override.m4.
 133         * configure: Regenerate.
 134         * avr/configure: Regenerate.
 135         * cris/configure: Regenerate.
 136
 137 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 138
 139         * Makefile.in (datarootdir): New variable.
 140
 141 2009-05-18  Jon Beniston <jon@beniston.com>
 142
 143         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 144         * configure.ac: Add lm32 target.
 145         * lm32: New directory.
 146
 147 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 148
 149         * MAINTAINERS: Orphan ppc.
 150
 151 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 152
 153         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 154         m32c_signal_to_target.  Change signal return values from SIGILL,
 155         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 156         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 157
 158 2009-04-30  Anthony Green  <green@moxielogic.com>
 159
 160         * MAINTAINERS: Add myself for the moxie port.
 161         * moxie: New directory.
 162         * configure.ac: Add entry for moxie.
 163         * configure: Regenerate.
 164
 165 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 166
 167         * avr: New directory.
 168         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 169         * avr/config.in: New file, generated by autoheader.
 170         * avr/configure: New file generated by autoconf.
 171         * configure.ac: Add avr.
 172         * configure: Regenerated.
 173
 174 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 175
 176         * Makefile.in: Add dummy install-pdf, html, and
 177         install-html targets.
 178
 179 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 180
 181         * cris/sim-if.c: Include errno.h.
 182         (cris_start_address, cris_program_offset): New variables.
 183         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 184         enums.
 185         (cris_options): New options --cris-program-offset and
 186         --cris-start-address.
 187         (cris_option_handler): Handle new options.
 188         (cris_program_offset_write, cris_set_section_offset_iterator)
 189         (cris_offset_sections, cris_offset_sections): New functions.
 190         (sim_load): Use cris_program_offset_write as function argument to
 191         cris_load_elf_file, not sim_write.
 192         (struct offsetinfo): New struct.
 193         (cris_handle_interpreter): Fix typo in comment.
 194         (sim_open): Call cris_offset_sections as soon as the bfd of the
 195         infile is available.  Gate bfd validity checks on abfd non-NULL.
 196         (sim_create_inferior): Let cris_start_address when != -1 override
 197         other start-address choices.
 198
 199 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 200
 201         * cris/traps.c (abort): Define to call sim_io_error.
 202         (create_map): Make -1 imply a non-fixed address, not 0.  All
 203         callers changed.  Only prefer the next higher unmapped address if
 204         the last mapped address is no less than 0x40000000.  Check that
 205         the address to be mapped is not already mapped.  Update head
 206         comment.
 207         (unmap_pages): Don't call abort when recursive call fails, just
 208         note and return an error if a page in the range couldn't be unmapped.
 209         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 210         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 211         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 212         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 213         don't abort on page not being mapped.  Handle non-anon filemap
 214         with length padded to pagesize.
 215
 216 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 217
 218         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 219         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 220         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 221         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 222         (TARGET_AT_CLKTCK): Remove redundant macros.
 223         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 224         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 225         callers.
 226         (sim_open): Also pass AT_SECURE.
 227
 228         * cris/sim-main.h (struct _sim_cpu): New member
 229         set_target_thread_data.
 230         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 231         * cris/crisv10f.c: Ditto.
 232         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 233         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 234         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 235         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 236         case.
 237
 238         * cris/traps.c (TARGET_SYS_exit_group): Define.
 239         (cris_break_13_handler): Handle it like the exit for the last
 240         thread.
 241
 242         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 243         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 244         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 245         2.6.27.  Set machine field to the BFD printable name of the
 246         machine.
 247
 248         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 249         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 250         TARGET_MAP_DENYWRITE.
 251
 252         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 253         (TARGET_X_OK, TARGET_F_OK): Define.
 254         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 255
 256         * cris/semcrisv32f-switch.c: Regenerate.
 257
 258 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 259
 260         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 261         just a short CRIS-specific notice.  Tweak the wording for a
 262         failing architecture test.
 263
 264         * cris/traps.c (TARGET_SYS_writev): New macro.
 265         (is_mapped_only, cris_dump_map): New functions.
 266         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 267         and prot combinations and a non-zero page-offset.  If
 268         TARGET_MAP_FIXED, unmap pages before mapping them.
 269         <case TARGET_SYS_mprotect>: When checking, allow any length
 270         argument.  Don't actually do anything.
 271         <case TARGET_SYS_writev>: New case.
 272
 273         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 274         * cris/sim-if.c: Include elf-bfd.h.
 275         (struct progbounds): New members end_loadmem, start_nonloadmem.
 276         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 277         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 278         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 279         static.  Update head comment.  Set new struct progbounds members.
 280         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 281         variables.
 282         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 283         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 284         functions.
 285         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 286         handling to use auxv_entries.  Improve error message and checking
 287         for invalid programs.  Use new variable abfd for the program
 288         instead of for each access reaching into sd to get it.
 289         (sim_create_inferior): If non-zero, use interp_start_addr instead
 290         of the program start address.
 291         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 292         stale comment.  Always specify little-endian.
 293
 294 2008-07-29  Nick Clifton  <nickc@redhat.com>
 295
 296         * common/genmloop.sh: Add new parameter: -shell to specify the
 297         command interpreter to use to run the input file.  This is
 298         necessary because otherwise SHELL is taken from the user's
 299         environment, and not from the makefile that invoked this script
 300         and the user might not be running an sh-like shell.
 301         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 302         * fr30/Makefile.in: Likewise.
 303         * frv/Makefile.in: Likewise.
 304         * i960/Makefile.in: Likewise.
 305         * iq2000/Makefile.in: Likewise.
 306         * m32r/Makefile.in: Likewise.
 307
 308         * frv/mloop.in: Add missing start of line comment marker.
 309
 310 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 311
 312         * cris/configure: Regenerate to track ../common/common.m4 changes.
 313         * cris/config.in: Ditto.
 314
 315 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 316             Daniel Jacobowitz  <dan@codesourcery.com>
 317             Joseph Myers  <joseph@codesourcery.com>
 318
 319         * cris/configure: Regenerate.
 320
 321 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 322
 323         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 324
 325 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 326
 327         * MAINTAINERS: Add myself as maintainer of cr16 port.
 328
 329 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 330
 331         Add simulator for National cr16 processor.
 332         * cr16: New directory.
 333         * configure.ac: Add entry for National cr16.
 334         * configure: Regenerate.
 335
 336 2008-02-05  DJ Delorie  <dj@redhat.com>
 337
 338         * configure.ac (v850): V850 now has a testsuite.
 339         * configure (v850): Likewise.
 340
 341 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 342
 343         Updated copyright notices for most files.
 344
 345 2007-12-19  DJ Delorie  <dj@redhat.com>
 346
 347         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 348         cut_point.
 349
 350 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 351
 352         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 353         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 354         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 355         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 356         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 357         cris/semcrisv32f-switch.c: Regenerate.
 358
 359 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 360
 361         Switch the license of all files explicitly copyright the FSF
 362         to GPLv3.
 363
 364 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 365
 366         * Makefile.in: Add dummy "pdf" target.
 367
 368 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 369
 370         * cris/traps.c (dump_statistics): Change format for cycle numbers
 371         to %llu and cast parameters to unsigned long long.
 372
 373 2007-02-16  Thiemo Seufer  <ths@mips.com>
 374
 375         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 376
 377 2007-01-28  Manuel Lauss  <slauss@resi.at>
 378
 379         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 380         (sh-*-*): Change to sh*-*-*.
 381         * configure: Regenerated.
 382
 383 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 384
 385         Updated copyright notices for most files.
 386
 387 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 388
 389         * Makefile.in (autoconf-common autoheader-common): Only run
 390         autoheader on subdirs with a file config.in.
 391
 392         * configure.ac (common): Make the default "yes" for all targets
 393         with sim subdirs.
 394         * configure: Regenerate.
 395
 396         * Makefile.in (autoconf-common autoheader-common): In documented
 397         usage, say SHELL=/bin/sh.
 398         (.PHONY): Add autoheader-common.
 399
 400         * MAINTAINERS: Add self as authorized committer for *.
 401
 402 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 403             Hans-Peter Nilsson  <hp@axis.com>
 404
 405         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 406         (cris_unknown_syscall_action): Declare.
 407         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 408         (cris_options): Add cris-unknown-syscall option.
 409         (cris_option_handler): Correct comment about and error message for
 410         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 411         * cris/traps.c: Include stdarg.h
 412         (cris_unknown_syscall): New function.
 413         (cris_break_13_handler): Instead of sim_io_eprintf and
 414         sim_engine_halt, call cris_unknown_syscall to handle more or less
 415         unknown syscalls.  Adjust code as necessary to handle return
 416         value.
 417
 418 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 419
 420         * MAINTAINERS: Add Dave Brolley for sh64.
 421
 422 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 423
 424         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 425         (cris_pipe_empty): Correct initialization of "remaining".  Only
 426         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 427         are written.
 428
 429 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 430
 431         * cris/configure.ac: Check for limits.h and sys/param.h.
 432         * cris/configure, cris/config.in: Rebuild.
 433         * cris/traps.c (SIM_PATHMAX): New macro.
 434         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 435
 436 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 437
 438         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 439         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 440         * configure: Regenerated.
 441
 442 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 443
 444         * cris/configure: Regenerated.
 445
 446 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 447
 448         * cris/configure: Regenerated.
 449
 450 2006-05-05  Andreas Schwab  <schwab@suse.de>
 451
 452         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 453         * configure: Regenerate.
 454
 455         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 456         (CC_FOR_BUILD): Don't override.
 457         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 458
 459 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 460
 461         * MAINTAINERS: Add an "Authorized committers" section, and list
 462         DJ Delorie for v850.
 463
 464 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 465
 466         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 467
 468 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 469
 470         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 471         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 472         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 473         (all): Depend on rvdummy$(EXEEXT).
 474         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 475         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 476         default off.
 477         * cris/configure: Regenerate.
 478         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 479         (enum cris_interrupt_type, crisv10deliver_interrupt)
 480         (crisv32deliver_interrupt: New declarations.
 481         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 482         sim_events_tickn and set state-events member work_pending when it's
 483         time for the next event.
 484         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 485         interrupt-delivery function.
 486         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 487         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 488         * cris/devices.c: Include hw-device.h.
 489         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 490         (device_io_write_buffer): Only perform 0x900000xx-functions if
 491         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 492         call hw_io_write_buffer.  Add return 0 last in function.
 493         * cris/sim-if.c (cris_have_900000xxif): Now global.
 494         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 495         Force "-model" option, effectively.
 496         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 497         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 498
 499 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 500
 501         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 502         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 503         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 504
 505 2006-03-13  DJ Delorie  <dj@redhat.com>
 506
 507         * MAINTAINERS: Add self as m32c sim maintainer.
 508
 509 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 510
 511         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 512         mapping.
 513         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 514
 515 2006-01-23  Jim Blandy  <jimb@redhat.com>
 516
 517         Add simulator for Renesas M32C and M16C.
 518
 519         * m32c: New directory.
 520         * configure.ac: Add entry for Renesas M32C.
 521         * configure: Regenerate.
 522
 523 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 524
 525         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 526         cycle count for the current insn.
 527
 528 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 529
 530         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 531         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 532         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 533         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 534
 535 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 536
 537         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 538         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 539         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 540         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 541         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 542         cris/semcrisv32f-switch.c: Regenerate.
 543
 544 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 545
 546         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 547         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 548         TARGET_O_WRONLY.
 549         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 550         F_GETFL on fd 0, 1 and 2.
 551
 552 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 553
 554         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 555         last_open_fd, last_open_flags.
 556         * cris/traps.c: Don't include targ-vals.h.
 557         (TARGET_O_ACCMODE): Define.
 558         (cris_break_13_handler): Set new _sim_cpu members.
 559         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 560         Rearrange code as switch.  Emit "unimplemented" abort for
 561         unimplemented fcntl calls.
 562
 563         * cris/traps.c (TARGET_SYS_stat): Define.
 564         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 565         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 566
 567 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 568
 569         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 570         low 32 bits are used after an unsigned long cast.
 571
 572 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 573
 574         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 575
 576 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 577
 578         * MAINTAINERS: Update my mail address, move myself to the
 579         "Past maintainers" section.
 580
 581 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 582
 583         * configure.ac: Add igen to v850 build.
 584         * configure: Regenerate.
 585
 586 2005-04-29  Paul Brook  <paul@codesourcery.com>
 587
 588         * common/callback.c (PIPE_BUF): Provide default definition.
 589         (os_lstat): Use stat if lstat is not available on the host.
 590         (os_ftruncate): Return EINVAL if not available on the host.
 591         (os_truncate): Ditto.
 592         * common/configure.ac: Check for lstat, truncate and ftruncate.
 593         * common/configure: Regenerate.
 594         * common/config.in: Regenerate.
 595
 596 2005-04-27  Paul Brook  <paul@codesourcery.com>
 597
 598         * common/Make-common.in: Add $(EXEEXT) to "run".
 599
 600 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 601
 602         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 603         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 604         implemented.  In call to create_map, pad length argument to 8k.
 605
 606 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 607
 608         * configure.ac: Add explicit sh64 case.
 609         * configure: Regenerate.
 610
 611 2005-03-30  Paul Brook  <paul@codesourcery.com>
 612
 613         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 614
 615 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 616
 617         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 618         include cgen-ops.h in decodev10.c and decodev32.c.
 619         * cris/sim-main.h: Don't include cgen-ops.h here.
 620         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 621         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 622         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 623         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 624         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 625         cris/semcrisv32f-switch.c: Regenerate.
 626
 627         * cris/traps.c (cris_break_13_handler) <case
 628         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 629         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 630
 631 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 632
 633         * cris/configure: Regenerate.
 634
 635 2005-02-28  Jim Blandy  <jimb@redhat.com>
 636
 637         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 638         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 639         Regenerated, after change to common/aclocal.m4.
 640
 641 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 642
 643         * iq2000: New target subdirectory.
 644         * configure.ac: Add iq2000 target.
 645         * configure: Regenerate.
 646
 647 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 648
 649         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 650         (realclean, install): Fail if subdir make failed.
 651
 652 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 653
 654         * cris: New directory, simulator for Axis Communications CRIS
 655         including CRIS v32, CGEN-based.
 656         * configure.ac: Add corresponding configury.
 657         * configure: Regenerate.
 658
 659 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 660
 661         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 662         common directory.  Remove sparc*-*-* from list.
 663
 664 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 665
 666         * Makefile.in (autoconf-common autoheader-common): Add --force to
 667         autoconf and autoheader.
 668         (autoconf-common autoheader-common)
 669         (autoconf-install autoheader-install): Check for configure.ac, not
 670         configure.in.
 671         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 672         * configure: Re-generate.
 673
 674 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 675
 676         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 677         correctly calls AC_CONFIG_SUBDIRS.
 678         * configure: Re-generate.
 679
 680 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 681
 682         * i960, h8500: Delete directory.
 683
 684 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 685
 686         * d30v, fr30, mn10200, z8k: Delete directory.
 687
 688 2004-03-10  Ben Elliston  <bje@gnu.org>
 689
 690         * MAINTAINERS: Update my mail address.
 691
 692 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 693
 694         * configure.in (mips*-*-*): Configure in testsuite.
 695         * configure: Regenerate.
 696
 697 2003-10-08  Dave Brolley  <brolley@redhat.com>
 698
 699         * configure.in: Move frv handling to alphabetically correct placement.
 700
 701 2003-09-03  Andreas Schwab  <schwab@suse.de>
 702
 703         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 704
 705 2003-08-29  Dave Brolley  <brolley@redhat.com>
 706
 707         * MAINTAINERS: Add myself as maintainer of the FRV port.
 708
 709 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 710             Dave Brolley  <brolley@redhat.com>
 711
 712         * frv/: New directory, simulator for the Fujitsu FRV.
 713         * configure.in: Add frv configury.
 714         * configure: Regenerate.
 715
 716 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 717
 718         * MAINTAINERS: Update my mail address.
 719
 720 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 721
 722         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 723         maintenance.  List igen and sh maintainers.  Mention that target
 724         and global maintainers pick up the slack.
 725
 726 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 727
 728         * configure.in: Add testsuite to extra_subdirs for sh.
 729         * configure: Regenerate.
 730
 731 2003-01-23  Nick Clifton  <nickc@redhat.com>
 732
 733         * Add sh2e support:
 734
 735 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 736
 737         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 738
 739 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 740
 741         * MAINTAINERS: Update my email address.
 742
 743 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 744
 745         * w65/: Delete directory.
 746
 747 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 748
 749         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 750         * configure: Re-generate.
 751
 752 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 753
 754         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 755         * configure: Re-generate.
 756
 757 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 758
 759         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 760         id, date and host to be overriden by NAME, ID, DATE and HOST
 761         respectfully.  Use ISO dates.
 762
 763 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 764
 765         * Makefile.in (ChangeLog): New makefile variable.
 766         * README-HACKING: Mention the ChangeLog makefile variable.
 767
 768 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 769
 770         * tic80/: Delete directory.
 771
 772 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 773
 774         * MAINTAINERS: Update my email address.
 775
 776 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 777
 778         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 779
 780 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 781
 782         * MAINTAINERS: Record self as a co-maintainer of just common/.
 783
 784 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 785
 786         * MAINTAINERS: Point to GDB files describing overall maintaince
 787         and check-in procedures.
 788
 789 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 790
 791         * MAINTAINERS: Add myself for ARM portions.
 792
 793 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 794
 795         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 796         * configure: Re-generate.
 797
 798 2001-02-16  Ben Elliston  <bje@redhat.com>
 799
 800         * MAINTAINERS: Add myself for common portions.
 801
 802 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 803
 804         * MAINTAINERS: Added self and Andrew for the mips sim.
 805
 806 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 807
 808         * MAINTAINERS: Added self and Andrew for the ppc sim.
 809
 810 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 811
 812         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 813         * m68hc11: New directory.
 814         * configure.in: Add.
 815         * configure: Regenerate.
 816
 817 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 818
 819         * tic80: New directory.
 820         * configure.in: Add configury.
 821         * configure: Regenerate.
 822
 823 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 824
 825         * configure.in (extra_subdirs): Add testsuite to strongarm
 826         directories.
 827         * configure: Regenerate.
 828
 829 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 830
 831         * MAINTAINERS: New file.  Blank.
 832
 833 1999-11-18  Ben Elliston  <bje@cygnus.com>
 834
 835         * configure.in: Require autoconf 2.13 and remove obsolete
 836         invocation of AC_C_CROSS.
 837         * configure: Regenerate.
 838
 839 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 840
 841         * configure.in: Configure the testsuite directory for thumb.
 842         * configure: Regenerate.
 843
 844 1999-07-16  Ben Elliston  <bje@cygnus.com>
 845
 846         * configure.in: Configure the testsuite directory for arm.
 847         * configure: Regenerate.
 848
 849 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 850
 851         * configure.in: Add support for MCore target.
 852         * configure: Regenerate.
 853
 854 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 855
 856         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 857         RUNTEST instead of commenting out, fixes portability problem.
 858
 859 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 860
 861         * configure.in: Add support for StrongARM target.
 862         * configure: Regenerate.
 863
 864 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 865
 866         * configure.in: Require autoconf 2.12.1 or higher.
 867
 868 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 869
 870         * configure.in (i960-*-*): Add.
 871         * configure: Rebuild.
 872
 873 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 874
 875         * configure.in: Added case for fr30-*-*.
 876         * configure: Regenerated.
 877
 878 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 879
 880         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 881         to allow successful operation on Windows.
 882
 883 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 884
 885         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 886         check can be invoked recursively.
 887
 888 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 889
 890         * configure.in: Build simulator on sparclite and sparc86x targets.
 891         * configure: Regenerate.
 892
 893 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 894
 895         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 896         to autoconf and autoheader.
 897
 898 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 899
 900         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 901         ../common' to autoconf and autoheader.  Unconditionally run
 902         autoconf in every subdir.
 903         (autoconf-changelog autoheader-changelog): Unconditionally run
 904         commands in every subdir.
 905         (autoconf-install autoheader-install): Likewise.
 906
 907 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 908
 909         * Makefile.in:  Get SHELL from configure.
 910         * (FLAGS_TO_PASS):  Pass down SHELL.
 911         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 912         NT native builds.
 913
 914 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 915
 916         * configure.in (extra_subdirs): Enable igen for mn10300.
 917         * configure: Re-generate.
 918
 919 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 920
 921         * configure.in (extra_subdirs): Add support for thumb target.
 922
 923         * configure (extra_subdirs): Add support for thumb target.
 924
 925 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 926
 927         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 928         target.
 929         * configure: Regenerate.
 930
 931 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 932
 933         * configure.in (extra_subdirs): v850ea needs igen.
 934         * configure: Re-generate.
 935
 936 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 937
 938         * configure.in (testdir): When a testsuite directory, add that to
 939         the list of confdirs.
 940
 941 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 942
 943         * configure.in (extra_subdirs): Enable igen ready for V850.
 944
 945 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 946
 947         * configure.in (w65-*-*, only_if_enabled): Set.
 948         * configure: Re-generate.
 949
 950 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 951
 952         * configure.in (sparc*-*-*, only_if_enabled): Set
 953         only_if_enabled=yes.  Check only_if_enabled before enabling a
 954         simulator.
 955         * configure: Regenerate.
 956
 957 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 958
 959         * configure.in (extra_subdirs): Add v850e target.
 960
 961 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 962
 963         * configure.in (extra_subdirs): Add v850ea target.
 964
 965 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 966
 967         * configure.in (sparc*-*-*): Don't build erc32.
 968         * configure: Regenerate.
 969
 970 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 971
 972         * configure.in (m32r-*-*): New target.
 973         * configure: Regenerate.
 974
 975         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 976
 977 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 978
 979         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 980         thought that .NOEXPORT was the default target.
 981
 982 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 983
 984         * Makefile.in (clean mostlyclean): Restore targets accidentally
 985         deleted in earlier change.
 986
 987 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 988
 989         * Makefile.in (autoheader-common, autoheader-changelog,
 990         autoheader-install): Perform autoheader in addition to autoconf.
 991
 992 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
 993
 994         * Makefile.in (autoconf-install): New target.
 995         (autoconf-changelog): Try different way to obtain user name.
 996
 997 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 998
 999         * Makefile.in (autoconf-changelog): New target, update
1000         ChangeLog for all subdirectories - normally used after
1001         autoconf-common target.
1002
1003 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1004
1005         * configure.in (extra_subdirs): Include testsuite for d30v.
1006         * configure: Regenerate.
1007
1008         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1009         ../gdb/Makefile.in
1010         (check): New rules - drive the testsuite.
1011
1012 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1013
1014         * configure.in: Add mn10200 configure lines accidentally
1015         removed.
1016         * configure: Regenerated.
1017
1018 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1019
1020         * configure.in (extra_subdirs): Generalize common sub directory
1021         into a list.
1022         (extra_subdirs): For d30v add igen to the list to be built.
1023
1024 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1025
1026         * configure.in (d30v): New target.
1027         * configure: Regenerated.
1028
1029 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1030
1031         * configure.in: Don't require GCC to build the mn10200
1032         simulator anymore.
1033         * configure: Rebuilt.
1034
1035 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1036
1037         * configure.in: Don't configure any subdirs if no simulator
1038         is being built.  Don't use erc32 for sparc64.
1039         * configure: Regenerated.
1040
1041 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1042
1043         * Makefile.in (autoconf-common): New target.
1044         * configure.in: Do configure common.
1045         * configure: Regenerated.
1046
1047 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1048
1049         * configure configure.in:  Don't configure common anymore.  Files
1050         from common are now built in the individual simualtor directories.
1051         This fixes problems with the WinGDB build procedure.
1052
1053 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1054
1055         * configure: Enable the mn10200 simulator.
1056
1057 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1058
1059         * configure.in (configdirs): Add common.
1060         * configure: Regenerated.
1061
1062 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1063
1064         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1065         system V based targets.
1066         * configure: Regenerate.
1067
1068 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1069
1070         * configure.in (--enable-sim-powerpc): Delete.
1071         (--enable-sim): Add.
1072         * configure: Regenerated.
1073
1074 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1075
1076         * configure.in: Only build the V850 simulator if
1077         we are using gcc.
1078         * configure: Rebuild.
1079
1080 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1081
1082         * configure.in: Do build erc32 for DOS and Windows hosts.
1083         * configure: Rebuild.
1084
1085 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1086
1087         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1088         be inherited from the parent.  Remove INSTALL_XFORM and
1089         INSTALL_XFORM1.  Make INSTALL be set from configure.
1090
1091 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1092
1093         * configure.in: Only build the MIPS simulator if we are using
1094         gcc.
1095         * configure: Rebuild.
1096
1097 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1098
1099         * configure.in (v850-*-*): Added V850 simulator.
1100
1101 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1102
1103         * configure.in (d10v-*-*): Added D10V simulator.
1104
1105 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1106
1107         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1108         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1109         (docdir): Removed.
1110         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1111         (AC_PROG_INSTALL): Added.
1112         * configure: Rebuilt.
1113
1114 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1115
1116         * configure.in: Only configure erc32 if using gcc.
1117         * configure: Rebuild.
1118
1119 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1120
1121         * configure.in (sim_target): Build PowerPC simulator for powerpc
1122         System V.4, Solaris, and Elf targets.
1123         * configure: Regenerate with autoconf 2.10.
1124
1125 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1126
1127         * configure.in: Only built erc32 simulator on Unix hosts as it
1128         uses pseudo ttys.
1129         * configure: Regenerated with autoconf 2.8.
1130
1131 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1132
1133         * erc32: Sparc simulator from the ESA.
1134
1135 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1136
1137         From: Miles Bader  <miles@gnu.ai.mit.edu>
1138         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1139         * configure: Regenerate using autoconf.
1140
1141 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1142
1143         * Makefile.in (install): Fix typo.
1144
1145 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1146
1147         * configure: Regenerate with autoconf 2.7.
1148
1149         * Makefile.in (all): Simplify.
1150         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1151         as in the all target.
1152         (distclean, maintainer-clean, realclean): Likewise.
1153         (install): Likewise.
1154
1155 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1156
1157         * Makefile.in (all): Remove extra '\' char from shell script.
1158
1159 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1160
1161         * Makefile.in (all): Avoid a for loop with zero elements, even if
1162         the loop will not be executed because of an if statement.
1163
1164 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1165
1166         * Makefile.in (install): Add missing semicolon in "fi \".
1167
1168 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1169
1170         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1171         defaults from configure.
1172
1173         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1174         configure defaults.
1175         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1176         if either --enable-sim-powerpc is used, or the host compiler is
1177         GCC.
1178
1179 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1180
1181         * configure.in (mips*-*-*): Added "mips" simulator target.
1182         * configure: Re-generated.
1183
1184 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1185
1186         * Makefile.in (BISON): Remove macro.
1187         (FLAGS_TO_PASS): Remove BISON.
1188
1189 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1190
1191         * configure.in:  Explicitly `exit 0' for broken shells.
1192         * configure:  Rebuilt.
1193
1194 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1195
1196         * common/run.c (main): Initialize the callbacks.
1197
1198 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1199
1200         * Makefile.in (maintainer-clean): New synonym for realclean.
1201
1202 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1203
1204         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1205         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1206
1207 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1208
1209         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1210         <cagney@highland.com.au>.
1211         * configure: Regnerate from configure.in.
1212
1213 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1214
1215         * Update all FSF addresses except those in COPYING* files.
1216
1217 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1218
1219         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1220         submakes either default or passed in value.
1221
1222 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1223
1224         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1225           install): Changed targets so that they descend all
1226           subdirectories in $(SUBDIRS).
1227           (*-all, *-clean, *-install): Removed targets.
1228
1229         * configure.in: Don't bother with target makefile fragments, they
1230           are no longer needed.
1231         * configure: regenerated.
1232
1233         * Makefile.in, configure.in: converted to autoconf.
1234         * configure: New file, generated with autconf 2.4.
1235
1236 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1237
1238         * Makefile.in: Support ARM.
1239         * configure.in: Ditto.
1240
1241 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1242
1243         * Makefile.in: Support W65.
1244         * configure.in: Ditto.
1245
1246 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1247
1248         * Makefile.in: Add TAGS target.
1249
1250 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1251
1252         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1253           install-h8300, clean-h8300, all-h8500, install-h8500,
1254           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1255           recursion lines.
1256
1257 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1258
1259         * Makefile.in: remove endian.h trace from h8500
1260
1261 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1262
1263         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1264
1265 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1266
1267         * Makefile.in: make all of the all-* target (except all-nothing)
1268         depend on endian.h, so that if we're not building a simulator, we
1269         don't built endian
1270
1271 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1272
1273         * Makefile.in (check, installcheck): Added dummy targets.
1274
1275 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1276
1277         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1278         explicitly make it, since some makes apparently don't work with
1279         VPATH and .c to executable rules (SunOS make for example).
1280
1281 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1282
1283         * Makefile.in (endian): Add explicit rule for broken makes.
1284
1285 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1286
1287         * Makefile.in (info, install-info): New targets.
1288         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1289         level Makefile.
1290
1291 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1292
1293         * Makefile.in (endian.h): build endian.h via a temporary file so
1294           that we don't leave an incomplete file lying around on
1295           interrupted builds.
1296           (clean): remove endian, e.h, and endian.h.
1297
1298 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1299
1300         * Makefile.in, configure.in: if target isn't supported, build a
1301         harmless makefile.
1302
1303