sim/ChangeLog

   1 2015-11-24  Nick Clifton  <nickc@redhat.com>
   2
   3         * configure.tgt: Add aarch64 entry.
   4         * configure: Regenerate.
   5         * sim/aarch64/configure.ac: New configure template.
   6         * sim/aarch64/aclocal.m4: Generate.
   7         * sim/aarch64/config.in: Generate.
   8         * sim/aarch64/configure: Generate.
   9         * sim/aarch64/cpustate.c: New file - functions for accessing
  10         AArch64 registers.
  11         * sim/aarch64/cpustate.h: New header.
  12         * sim/aarch64/decode.h: New header.
  13         * sim/aarch64/interp.c: New file - interface between GDB and
  14         simulator.
  15         * sim/aarch64/Makefile.in: New makefile template.
  16         * sim/aarch64/memory.c: New file - functions for simulating
  17         aarch64 memory accesses.
  18         * sim/aarch64/memory.h: New header.
  19         * sim/aarch64/sim-main.h: New header.
  20         * sim/aarch64/simulator.c: New file - aarch64 simulator
  21         functions.
  22         * sim/aarch64/simulator.h: New header.
  23
  24 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
  25
  26         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
  27         * configure: Regenerate.
  28
  29 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  30
  31         * README-HACKING: Change configure.in to configure.ac.
  32
  33 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
  34
  35         * arm/configure: Regenerated.
  36         * avr/configure: Likewise.
  37         * bfin/configure: Likewise.
  38         * common/configure: Likewise.
  39         * cr16/configure: Likewise.
  40         * cris/configure: Likewise.
  41         * d10v/configure: Likewise.
  42         * erc32/configure: Likewise.
  43         * frv/configure: Likewise.
  44         * ft32/configure: Likewise.
  45         * h8300/configure: Likewise.
  46         * igen/configure: Likewise.
  47         * iq2000/configure: Likewise.
  48         * lm32/configure: Likewise.
  49         * m32c/configure: Likewise.
  50         * m32r/configure: Likewise.
  51         * m68hc11/configure: Likewise.
  52         * mcore/configure: Likewise.
  53         * microblaze/configure: Likewise.
  54         * mips/configure: Likewise.
  55         * mn10300/configure: Likewise.
  56         * moxie/configure: Likewise.
  57         * msp430/configure: Likewise.
  58         * ppc/configure: Likewise.
  59         * rl78/configure: Likewise.
  60         * rx/configure: Likewise.
  61         * sh/configure: Likewise.
  62         * sh64/configure: Likewise.
  63         * v850/configure: Likewise.
  64
  65 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
  66
  67         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
  68         (BFD_LIB): Remove $(ZLIB).
  69         (CONFIG_LIBS): Add $(ZLIB).
  70         * ppc/Makefile.in (ZLIBINC): Removed.
  71         (INCLUDES): Remove $(ZLIBINC).
  72         (BFD_LIB): Remove $(ZLIB).
  73
  74 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
  75
  76         * arm/configure: Regenerated.
  77         * avr/configure: Likewise.
  78         * bfin/configure: Likewise.
  79         * common/configure: Likewise.
  80         * cr16/configure: Likewise.
  81         * cris/configure: Likewise.
  82         * d10v/configure: Likewise.
  83         * erc32/configure: Likewise.
  84         * frv/configure: Likewise.
  85         * ft32/configure: Likewise.
  86         * h8300/configure: Likewise.
  87         * igen/configure: Likewise.
  88         * iq2000/configure: Likewise.
  89         * lm32/configure: Likewise.
  90         * m32c/configure: Likewise.
  91         * m32r/configure: Likewise.
  92         * m68hc11/configure: Likewise.
  93         * mcore/configure: Likewise.
  94         * microblaze/configure: Likewise.
  95         * mips/configure: Likewise.
  96         * mn10300/configure: Likewise.
  97         * moxie/configure: Likewise.
  98         * msp430/configure: Likewise.
  99         * ppc/configure: Likewise.
 100         * rl78/configure: Likewise.
 101         * rx/configure: Likewise.
 102         * sh/configure: Likewise.
 103         * sh64/configure: Likewise.
 104         * v850/configure: Likewise.
 105
 106 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 107
 108         * configure: Regenerate.
 109         * configure.ac: Delete sim_testsuite check and config in testsuite.
 110         * configure.tgt (sim_testsuite): Delete everywhere.
 111
 112 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * configure: Regenerate.
 115         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 116
 117 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 118
 119         * configure.tgt: Add FT32 entry.
 120         * configure: Regenerate.
 121
 122 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 123
 124         * .gitignore: Delete tconfig.h.
 125         * README-HACKING: Change tconfig.in to tconfig.h.
 126
 127 2014-03-12  Nick Clifton  <nickc@redhat.com>
 128
 129         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 130
 131 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 132
 133         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 134         * configure: Regenerate.
 135
 136 2014-01-06  Tom Tromey  <tromey@redhat.com>
 137
 138         * common/cgen-trace.c: Don't use old VA_* macros.
 139         * common/sim-load.c (xprintf): Likewise.
 140         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 141
 142 2014-01-06  Tom Tromey  <tromey@redhat.com>
 143
 144         * README-HACKING: Don't use PARAMS.
 145         * arm/wrapper.c: Don't use PARAMS.
 146         * bfin/sim-main.h: Don't use PARAMS.
 147         * common/callback.c: Don't use PARAMS.
 148         * common/cgen-trace.c: Don't use PARAMS.
 149         * common/run-sim.h: Don't use PARAMS.
 150         * common/run.c: Don't use PARAMS.
 151         * common/sim-base.h: Don't use PARAMS.
 152         * common/sim-load.c: Don't use PARAMS.
 153         * common/sim-options.h: Don't use PARAMS.
 154         * common/sim-trace.c: Don't use PARAMS.
 155         * common/sim-trace.h: Don't use PARAMS.
 156         * common/sim-utils.h: Don't use PARAMS.
 157         * cr16/cr16_sim.h: Don't use PARAMS.
 158         * cr16/gencode.c: Don't use PARAMS.
 159         * cr16/interp.c: Don't use PARAMS.
 160         * cr16/simops.c: Don't use PARAMS.
 161         * d10v/d10v_sim.h: Don't use PARAMS.
 162         * d10v/gencode.c: Don't use PARAMS.
 163         * d10v/interp.c: Don't use PARAMS.
 164         * d10v/simops.c: Don't use PARAMS.
 165         * erc32/erc32.c: Don't use PARAMS.
 166         * erc32/exec.c: Don't use PARAMS.
 167         * erc32/float.c: Don't use PARAMS.
 168         * erc32/func.c: Don't use PARAMS.
 169         * erc32/sis.c: Don't use PARAMS.
 170         * erc32/sis.h: Don't use PARAMS.
 171         * mips/interp.c: Don't use PARAMS.
 172         * mips/sim-main.h: Don't use PARAMS.
 173         * sh/interp.c: Don't use PARAMS.
 174         * v850/sim-main.h: Don't use PARAMS.
 175         * v850/v850_sim.h: Don't use PARAMS.
 176
 177 2013-11-07  Will Newton  <will.newton@linaro.org>
 178
 179         PR gdb/15508
 180         * arm/wrapper.c (sim_create_inferior): Call init before
 181         accessing STATE.
 182
 183 2013-11-07  Will Newton  <will.newton@linaro.org>
 184
 185         PR gdb/8989
 186         * arm/wrapper.c (sim_create_inferior): Avoid calling
 187         bfd_get_mach with a NULL bfd.
 188
 189 2013-06-21  Nick Clifton  <nickc@redhat.com>
 190
 191         * msp430: New Directory.
 192         * configure.tgt: Add it.
 193         * configure: Regenerate.
 194
 195 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 196
 197         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 198         * avr/interp.c (sim_complete_command): Ditto.
 199         * common/sim-options.c (sim_complete_command): Ditto.
 200         * cr16/interp.c (sim_complete_command): Ditto.
 201         * erc32/interf.c (sim_complete_command): Ditto.
 202         * m32c/gdb-if.c (sim_complete_command): Ditto.
 203         * microblaze/interp.c (sim_complete_command): Ditto.
 204         * ppc/sim_calls.c (sim_complete_command): Ditto.
 205         * rl78/gdb-if.c (sim_complete_command): Ditto.
 206         * rx/gdb-if.c (sim_complete_command): Ditto.
 207         * sh/interp.c (sim_complete_command): Ditto.
 208
 209 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 210
 211         Update year range in copyright notice of all files.
 212
 213 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 214
 215         Update old contact info in GPL license notices.
 216
 217 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 218
 219         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 220
 221 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 222
 223         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 224         condition.
 225         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 226         * arm/configure: Regenerate.
 227         * avr/configure: Regenerate.
 228         * bfin/configure: Regenerate.
 229         * common/configure: Regenerate.
 230         * cr16/configure: Regenerate.
 231         * cris/configure: Regenerate.
 232         * d10v/configure: Regenerate.
 233         * erc32/configure: Regenerate.
 234         * frv/configure: Regenerate.
 235         * h8300/configure: Regenerate.
 236         * igen/configure: Regenerate.
 237         * iq2000/configure: Regenerate.
 238         * lm32/configure: Regenerate.
 239         * m32c/configure: Regenerate.
 240         * m32r/configure: Regenerate.
 241         * m68hc11/configure: Regenerate.
 242         * mcore/configure: Regenerate.
 243         * microblaze/configure: Regenerate.
 244         * mips/configure: Regenerate.
 245         * mn10300/configure: Regenerate.
 246         * moxie/configure: Regenerate.
 247         * ppc/configure: Regenerate.
 248         * rl78/configure: Regenerate.
 249         * rx/configure: Regenerate.
 250         * sh/configure: Regenerate.
 251         * sh64/configure: Regenerate.
 252         * testsuite/configure: Regenerate.
 253         * v850/configure: Regenerate.
 254
 255 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 256
 257         * MAINTAINERS: Update my email address.
 258
 259 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 260
 261         * mips/basic.exp: Add mips*-mti-elf* target.
 262         * configure.ac: Add mips*-mti-elf* target.
 263         * configure: Regenerate.
 264
 265 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 266
 267         * configure: Regenerate.
 268
 269 2012-06-06  Michael Eager  <eager@eagercon.com>
 270
 271         * microblaze/interp.c (config.h): Add #include.
 272
 273 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 274
 275         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 276         Frysinger.
 277
 278 2011-11-28  DJ Delorie  <dj@redhat.com>
 279
 280         * configure.tgt: Add rl78 support.
 281         * configure: Regenerate.
 282         * rl78: New directory.
 283         * MAINTAINERS: Add myself as RL78 maintainer.
 284
 285 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 286
 287         * MAINTAINERS: Remove Thiemo Seufer.
 288
 289 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 290
 291         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 292         * configure: Regenerate.
 293
 294 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 295
 296         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 297         handle targets.
 298         * configure: Regenerate.
 299
 300 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 301
 302         * MAINTAINERS: Add bfin entry.
 303         * configure.tgt (bfin-*-*): Handle bfin targets.
 304         * configure: Regenerate.
 305
 306 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 307
 308         * .gitignore: Add /*/hw-config.h.
 309
 310 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 311
 312         * .gitignore: New file.
 313
 314 2010-07-28  DJ Delorie  <dj@redhat.com>
 315
 316         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 317
 318 2010-06-08  Nick Clifton  <nickc@redhat.com>
 319
 320         * reg.c (set_oszc): Use unsigned int for the mask.
 321         (set_szc, set_osz, set_sz): Likewise.
 322
 323 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 324
 325         * configure.ac: Target logic moved out to and included from ...
 326         * configure.tgt: ... this new file.
 327         * configure: Regenerated.
 328
 329 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 330
 331         * README-HACKING: Add more sections.
 332
 333 2010-02-11  Doug Evans  <dje@sebabeach.org>
 334
 335         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 336         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 337         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 338         * cris/semcrisv32f-switch.c: Regenerate.
 339
 340 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 341
 342         * avr/configure: Regenerate.
 343         * cris/configure: Regenerate.
 344         * microblaze/configure: Regenerate.
 345
 346 2010-01-02  Doug Evans  <dje@sebabeach.org>
 347
 348         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 349         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 350         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 351         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 352         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 353         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 354
 355 2010-01-01  Doug Evans  <dje@sebabeach.org>
 356
 357         * cris/mloop.in: Fix copyright year update snafu.
 358
 359 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 360
 361         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 362         * common/common.m4: Use AM_ZLIB to check for zlib support.
 363         * ppc/configure.ac: Likewise.
 364         * arm/configure, avr/configure, common/configure, cr16/configure,
 365         cris/configure, d10v/configure, erc32/configure, frv/configure,
 366         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 367         m32r/configure, m68hc11/configure, mcore/configure,
 368         microblaze/configure, mips/configure, mn10300/configure,
 369         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 370         v850/configure: Regenerate.
 371
 372 2009-11-24  DJ Delorie  <dj@redhat.com>
 373
 374         * rx: New directory.
 375         * configure.ac: Add entry for Renesas RX.
 376         * configure: Regenerate.
 377
 378 2009-11-22  Doug Evans  <dje@sebabeach.org>
 379
 380         * cris/cpuall.h: Regenerate.
 381         * cris/cpuv10.h: Regenerate.
 382         * cris/cpuv32.h: Regenerate.
 383         * cris/decodev10.c: Regenerate.
 384         * cris/decodev10.h: Regenerate.
 385         * cris/decodev32.c: Regenerate.
 386         * cris/decodev32.h: Regenerate.
 387
 388 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 389
 390         * avr/interp.c (sim_write): Allow byte access.
 391         (sim_read): Ditto.
 392
 393 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 394
 395         * avr/interp.c (sim_load): Clear memory before loading.
 396
 397 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 398
 399         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 400
 401 2009-10-23  Doug Evans  <dje@sebabeach.org>
 402
 403         * cris/arch.c: Regenerate.
 404         * cris/arch.h: Regenerate.
 405         * cris/cpuall.h: Regenerate.
 406         * cris/cpuv10.c: Regenerate.
 407         * cris/cpuv10.h: Regenerate.
 408         * cris/cpuv32.c: Regenerate.
 409         * cris/cpuv32.h: Regenerate.
 410         * cris/cris-desc.c: Regenerate.
 411         * cris/cris-desc.h: Regenerate.
 412         * cris/cris-opc.h: Regenerate.
 413         * cris/decodev10.c: Regenerate.
 414         * cris/decodev10.h: Regenerate.
 415         * cris/decodev32.c: Regenerate.
 416         * cris/decodev32.h: Regenerate.
 417         * cris/modelv10.c: Regenerate.
 418         * cris/modelv32.c: Regenerate.
 419         * cris/semcrisv10f-switch.c: Regenerate.
 420         * cris/semcrisv32f-switch.c: Regenerate.
 421
 422 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 423
 424         * avr/interp.c (sim_stop): Return 1.
 425
 426 2009-10-16  Doug Evans  <dje@sebabeach.org>
 427
 428         * MAINTAINERS: Add myself as m32r maintainer.
 429
 430 2009-10-15  Michael Egaer  <eager@eagercon.com>
 431
 432         * MAINTAINERS: Add self as MicroBlaze maintainer.
 433
 434 2009-10-14  Ben Elliston  <bje@gnu.org>
 435
 436         * MAINTAINERS (common): Move myself to "past maintainers" section.
 437
 438 2009-10-06  Michael Eager  <eager@eagercon.com>
 439
 440         * microblaze/interp.c: Add include microblaze-dis.h.
 441
 442 2009-09-23  Michael Eager  <eager@eagercon.com>
 443
 444         * configure: Add microblaze-*.* (not regenerated).
 445         * configure.ac: Likewise.
 446         * microblaze/config.in: New.
 447         * microblaze/configure: Generate.
 448         * microblaze/configure.ac: New.
 449         * microblaze/interp.c: New.
 450         * microblaze/Makefile.in: New.
 451         * microblaze/microblaze.h: New.
 452         * microblaze/microblaze.isa: New.
 453         * microblaze/sim-main.h: New.
 454         * microblaze/sysdep.h: New.
 455
 456 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 457
 458         * avr/config.in: Regenerate.
 459         * avr/configure: Likewise.
 460         * configure: Likewise.
 461         * cris/config.in: Likewise.
 462         * cris/configure: Likewise.
 463
 464         * configure.ac: m4_include toplevel config/override.m4.
 465         * configure: Regenerate.
 466         * avr/configure: Regenerate.
 467         * cris/configure: Regenerate.
 468
 469 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 470
 471         * Makefile.in (datarootdir): New variable.
 472
 473 2009-05-18  Jon Beniston <jon@beniston.com>
 474
 475         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 476         * configure.ac: Add lm32 target.
 477         * lm32: New directory.
 478
 479 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 480
 481         * MAINTAINERS: Orphan ppc.
 482
 483 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 484
 485         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 486         m32c_signal_to_target.  Change signal return values from SIGILL,
 487         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 488         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 489
 490 2009-04-30  Anthony Green  <green@moxielogic.com>
 491
 492         * MAINTAINERS: Add myself for the moxie port.
 493         * moxie: New directory.
 494         * configure.ac: Add entry for moxie.
 495         * configure: Regenerate.
 496
 497 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 498
 499         * avr: New directory.
 500         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 501         * avr/config.in: New file, generated by autoheader.
 502         * avr/configure: New file generated by autoconf.
 503         * configure.ac: Add avr.
 504         * configure: Regenerated.
 505
 506 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 507
 508         * Makefile.in: Add dummy install-pdf, html, and
 509         install-html targets.
 510
 511 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 512
 513         * cris/sim-if.c: Include errno.h.
 514         (cris_start_address, cris_program_offset): New variables.
 515         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 516         enums.
 517         (cris_options): New options --cris-program-offset and
 518         --cris-start-address.
 519         (cris_option_handler): Handle new options.
 520         (cris_program_offset_write, cris_set_section_offset_iterator)
 521         (cris_offset_sections, cris_offset_sections): New functions.
 522         (sim_load): Use cris_program_offset_write as function argument to
 523         cris_load_elf_file, not sim_write.
 524         (struct offsetinfo): New struct.
 525         (cris_handle_interpreter): Fix typo in comment.
 526         (sim_open): Call cris_offset_sections as soon as the bfd of the
 527         infile is available.  Gate bfd validity checks on abfd non-NULL.
 528         (sim_create_inferior): Let cris_start_address when != -1 override
 529         other start-address choices.
 530
 531 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 532
 533         * cris/traps.c (abort): Define to call sim_io_error.
 534         (create_map): Make -1 imply a non-fixed address, not 0.  All
 535         callers changed.  Only prefer the next higher unmapped address if
 536         the last mapped address is no less than 0x40000000.  Check that
 537         the address to be mapped is not already mapped.  Update head
 538         comment.
 539         (unmap_pages): Don't call abort when recursive call fails, just
 540         note and return an error if a page in the range couldn't be unmapped.
 541         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 542         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 543         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 544         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 545         don't abort on page not being mapped.  Handle non-anon filemap
 546         with length padded to pagesize.
 547
 548 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 549
 550         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 551         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 552         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 553         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 554         (TARGET_AT_CLKTCK): Remove redundant macros.
 555         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 556         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 557         callers.
 558         (sim_open): Also pass AT_SECURE.
 559
 560         * cris/sim-main.h (struct _sim_cpu): New member
 561         set_target_thread_data.
 562         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 563         * cris/crisv10f.c: Ditto.
 564         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 565         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 566         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 567         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 568         case.
 569
 570         * cris/traps.c (TARGET_SYS_exit_group): Define.
 571         (cris_break_13_handler): Handle it like the exit for the last
 572         thread.
 573
 574         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 575         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 576         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 577         2.6.27.  Set machine field to the BFD printable name of the
 578         machine.
 579
 580         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 581         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 582         TARGET_MAP_DENYWRITE.
 583
 584         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 585         (TARGET_X_OK, TARGET_F_OK): Define.
 586         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 587
 588         * cris/semcrisv32f-switch.c: Regenerate.
 589
 590 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 591
 592         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 593         just a short CRIS-specific notice.  Tweak the wording for a
 594         failing architecture test.
 595
 596         * cris/traps.c (TARGET_SYS_writev): New macro.
 597         (is_mapped_only, cris_dump_map): New functions.
 598         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 599         and prot combinations and a non-zero page-offset.  If
 600         TARGET_MAP_FIXED, unmap pages before mapping them.
 601         <case TARGET_SYS_mprotect>: When checking, allow any length
 602         argument.  Don't actually do anything.
 603         <case TARGET_SYS_writev>: New case.
 604
 605         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 606         * cris/sim-if.c: Include elf-bfd.h.
 607         (struct progbounds): New members end_loadmem, start_nonloadmem.
 608         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 609         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 610         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 611         static.  Update head comment.  Set new struct progbounds members.
 612         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 613         variables.
 614         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 615         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 616         functions.
 617         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 618         handling to use auxv_entries.  Improve error message and checking
 619         for invalid programs.  Use new variable abfd for the program
 620         instead of for each access reaching into sd to get it.
 621         (sim_create_inferior): If non-zero, use interp_start_addr instead
 622         of the program start address.
 623         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 624         stale comment.  Always specify little-endian.
 625
 626 2008-07-29  Nick Clifton  <nickc@redhat.com>
 627
 628         * common/genmloop.sh: Add new parameter: -shell to specify the
 629         command interpreter to use to run the input file.  This is
 630         necessary because otherwise SHELL is taken from the user's
 631         environment, and not from the makefile that invoked this script
 632         and the user might not be running an sh-like shell.
 633         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 634         * fr30/Makefile.in: Likewise.
 635         * frv/Makefile.in: Likewise.
 636         * i960/Makefile.in: Likewise.
 637         * iq2000/Makefile.in: Likewise.
 638         * m32r/Makefile.in: Likewise.
 639
 640         * frv/mloop.in: Add missing start of line comment marker.
 641
 642 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 643
 644         * cris/configure: Regenerate to track ../common/common.m4 changes.
 645         * cris/config.in: Ditto.
 646
 647 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 648             Daniel Jacobowitz  <dan@codesourcery.com>
 649             Joseph Myers  <joseph@codesourcery.com>
 650
 651         * cris/configure: Regenerate.
 652
 653 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 654
 655         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 656
 657 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 658
 659         * MAINTAINERS: Add myself as maintainer of cr16 port.
 660
 661 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 662
 663         Add simulator for National cr16 processor.
 664         * cr16: New directory.
 665         * configure.ac: Add entry for National cr16.
 666         * configure: Regenerate.
 667
 668 2008-02-05  DJ Delorie  <dj@redhat.com>
 669
 670         * configure.ac (v850): V850 now has a testsuite.
 671         * configure (v850): Likewise.
 672
 673 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 674
 675         Updated copyright notices for most files.
 676
 677 2007-12-19  DJ Delorie  <dj@redhat.com>
 678
 679         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 680         cut_point.
 681
 682 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 683
 684         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 685         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 686         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 687         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 688         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 689         cris/semcrisv32f-switch.c: Regenerate.
 690
 691 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 692
 693         Switch the license of all files explicitly copyright the FSF
 694         to GPLv3.
 695
 696 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 697
 698         * Makefile.in: Add dummy "pdf" target.
 699
 700 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 701
 702         * cris/traps.c (dump_statistics): Change format for cycle numbers
 703         to %llu and cast parameters to unsigned long long.
 704
 705 2007-02-16  Thiemo Seufer  <ths@mips.com>
 706
 707         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 708
 709 2007-01-28  Manuel Lauss  <slauss@resi.at>
 710
 711         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 712         (sh-*-*): Change to sh*-*-*.
 713         * configure: Regenerated.
 714
 715 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 716
 717         Updated copyright notices for most files.
 718
 719 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 720
 721         * Makefile.in (autoconf-common autoheader-common): Only run
 722         autoheader on subdirs with a file config.in.
 723
 724         * configure.ac (common): Make the default "yes" for all targets
 725         with sim subdirs.
 726         * configure: Regenerate.
 727
 728         * Makefile.in (autoconf-common autoheader-common): In documented
 729         usage, say SHELL=/bin/sh.
 730         (.PHONY): Add autoheader-common.
 731
 732         * MAINTAINERS: Add self as authorized committer for *.
 733
 734 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 735             Hans-Peter Nilsson  <hp@axis.com>
 736
 737         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 738         (cris_unknown_syscall_action): Declare.
 739         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 740         (cris_options): Add cris-unknown-syscall option.
 741         (cris_option_handler): Correct comment about and error message for
 742         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 743         * cris/traps.c: Include stdarg.h
 744         (cris_unknown_syscall): New function.
 745         (cris_break_13_handler): Instead of sim_io_eprintf and
 746         sim_engine_halt, call cris_unknown_syscall to handle more or less
 747         unknown syscalls.  Adjust code as necessary to handle return
 748         value.
 749
 750 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 751
 752         * MAINTAINERS: Add Dave Brolley for sh64.
 753
 754 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 755
 756         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 757         (cris_pipe_empty): Correct initialization of "remaining".  Only
 758         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 759         are written.
 760
 761 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 762
 763         * cris/configure.ac: Check for limits.h and sys/param.h.
 764         * cris/configure, cris/config.in: Rebuild.
 765         * cris/traps.c (SIM_PATHMAX): New macro.
 766         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 767
 768 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 769
 770         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 771         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 772         * configure: Regenerated.
 773
 774 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 775
 776         * cris/configure: Regenerated.
 777
 778 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 779
 780         * cris/configure: Regenerated.
 781
 782 2006-05-05  Andreas Schwab  <schwab@suse.de>
 783
 784         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 785         * configure: Regenerate.
 786
 787         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 788         (CC_FOR_BUILD): Don't override.
 789         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 790
 791 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 792
 793         * MAINTAINERS: Add an "Authorized committers" section, and list
 794         DJ Delorie for v850.
 795
 796 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 797
 798         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 799
 800 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 801
 802         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 803         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 804         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 805         (all): Depend on rvdummy$(EXEEXT).
 806         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 807         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 808         default off.
 809         * cris/configure: Regenerate.
 810         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 811         (enum cris_interrupt_type, crisv10deliver_interrupt)
 812         (crisv32deliver_interrupt: New declarations.
 813         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 814         sim_events_tickn and set state-events member work_pending when it's
 815         time for the next event.
 816         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 817         interrupt-delivery function.
 818         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 819         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 820         * cris/devices.c: Include hw-device.h.
 821         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 822         (device_io_write_buffer): Only perform 0x900000xx-functions if
 823         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 824         call hw_io_write_buffer.  Add return 0 last in function.
 825         * cris/sim-if.c (cris_have_900000xxif): Now global.
 826         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 827         Force "-model" option, effectively.
 828         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 829         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 830
 831 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 832
 833         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 834         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 835         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 836
 837 2006-03-13  DJ Delorie  <dj@redhat.com>
 838
 839         * MAINTAINERS: Add self as m32c sim maintainer.
 840
 841 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 842
 843         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 844         mapping.
 845         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 846
 847 2006-01-23  Jim Blandy  <jimb@redhat.com>
 848
 849         Add simulator for Renesas M32C and M16C.
 850
 851         * m32c: New directory.
 852         * configure.ac: Add entry for Renesas M32C.
 853         * configure: Regenerate.
 854
 855 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 856
 857         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 858         cycle count for the current insn.
 859
 860 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 861
 862         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 863         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 864         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 865         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 866
 867 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 868
 869         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 870         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 871         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 872         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 873         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 874         cris/semcrisv32f-switch.c: Regenerate.
 875
 876 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 877
 878         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 879         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 880         TARGET_O_WRONLY.
 881         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 882         F_GETFL on fd 0, 1 and 2.
 883
 884 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 885
 886         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 887         last_open_fd, last_open_flags.
 888         * cris/traps.c: Don't include targ-vals.h.
 889         (TARGET_O_ACCMODE): Define.
 890         (cris_break_13_handler): Set new _sim_cpu members.
 891         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 892         Rearrange code as switch.  Emit "unimplemented" abort for
 893         unimplemented fcntl calls.
 894
 895         * cris/traps.c (TARGET_SYS_stat): Define.
 896         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 897         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 898
 899 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 900
 901         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 902         low 32 bits are used after an unsigned long cast.
 903
 904 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 905
 906         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 907
 908 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 909
 910         * MAINTAINERS: Update my mail address, move myself to the
 911         "Past maintainers" section.
 912
 913 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 914
 915         * configure.ac: Add igen to v850 build.
 916         * configure: Regenerate.
 917
 918 2005-04-29  Paul Brook  <paul@codesourcery.com>
 919
 920         * common/callback.c (PIPE_BUF): Provide default definition.
 921         (os_lstat): Use stat if lstat is not available on the host.
 922         (os_ftruncate): Return EINVAL if not available on the host.
 923         (os_truncate): Ditto.
 924         * common/configure.ac: Check for lstat, truncate and ftruncate.
 925         * common/configure: Regenerate.
 926         * common/config.in: Regenerate.
 927
 928 2005-04-27  Paul Brook  <paul@codesourcery.com>
 929
 930         * common/Make-common.in: Add $(EXEEXT) to "run".
 931
 932 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 933
 934         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 935         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 936         implemented.  In call to create_map, pad length argument to 8k.
 937
 938 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 939
 940         * configure.ac: Add explicit sh64 case.
 941         * configure: Regenerate.
 942
 943 2005-03-30  Paul Brook  <paul@codesourcery.com>
 944
 945         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 946
 947 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 948
 949         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 950         include cgen-ops.h in decodev10.c and decodev32.c.
 951         * cris/sim-main.h: Don't include cgen-ops.h here.
 952         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 953         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 954         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 955         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 956         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 957         cris/semcrisv32f-switch.c: Regenerate.
 958
 959         * cris/traps.c (cris_break_13_handler) <case
 960         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 961         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 962
 963 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 964
 965         * cris/configure: Regenerate.
 966
 967 2005-02-28  Jim Blandy  <jimb@redhat.com>
 968
 969         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 970         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 971         Regenerated, after change to common/aclocal.m4.
 972
 973 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 974
 975         * iq2000: New target subdirectory.
 976         * configure.ac: Add iq2000 target.
 977         * configure: Regenerate.
 978
 979 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 980
 981         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 982         (realclean, install): Fail if subdir make failed.
 983
 984 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 985
 986         * cris: New directory, simulator for Axis Communications CRIS
 987         including CRIS v32, CGEN-based.
 988         * configure.ac: Add corresponding configury.
 989         * configure: Regenerate.
 990
 991 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 992
 993         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 994         common directory.  Remove sparc*-*-* from list.
 995
 996 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 997
 998         * Makefile.in (autoconf-common autoheader-common): Add --force to
 999         autoconf and autoheader.
1000         (autoconf-common autoheader-common)
1001         (autoconf-install autoheader-install): Check for configure.ac, not
1002         configure.in.
1003         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1004         * configure: Re-generate.
1005
1006 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1007
1008         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1009         correctly calls AC_CONFIG_SUBDIRS.
1010         * configure: Re-generate.
1011
1012 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1013
1014         * i960, h8500: Delete directory.
1015
1016 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1017
1018         * d30v, fr30, mn10200, z8k: Delete directory.
1019
1020 2004-03-10  Ben Elliston  <bje@gnu.org>
1021
1022         * MAINTAINERS: Update my mail address.
1023
1024 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1025
1026         * configure.in (mips*-*-*): Configure in testsuite.
1027         * configure: Regenerate.
1028
1029 2003-10-08  Dave Brolley  <brolley@redhat.com>
1030
1031         * configure.in: Move frv handling to alphabetically correct placement.
1032
1033 2003-09-03  Andreas Schwab  <schwab@suse.de>
1034
1035         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1036
1037 2003-08-29  Dave Brolley  <brolley@redhat.com>
1038
1039         * MAINTAINERS: Add myself as maintainer of the FRV port.
1040
1041 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1042             Dave Brolley  <brolley@redhat.com>
1043
1044         * frv/: New directory, simulator for the Fujitsu FRV.
1045         * configure.in: Add frv configury.
1046         * configure: Regenerate.
1047
1048 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1049
1050         * MAINTAINERS: Update my mail address.
1051
1052 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1053
1054         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1055         maintenance.  List igen and sh maintainers.  Mention that target
1056         and global maintainers pick up the slack.
1057
1058 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1059
1060         * configure.in: Add testsuite to extra_subdirs for sh.
1061         * configure: Regenerate.
1062
1063 2003-01-23  Nick Clifton  <nickc@redhat.com>
1064
1065         * Add sh2e support:
1066
1067 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1068
1069         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1070
1071 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1072
1073         * MAINTAINERS: Update my email address.
1074
1075 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1076
1077         * w65/: Delete directory.
1078
1079 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1080
1081         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1082         * configure: Re-generate.
1083
1084 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1085
1086         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1087         * configure: Re-generate.
1088
1089 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1090
1091         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1092         id, date and host to be overriden by NAME, ID, DATE and HOST
1093         respectfully.  Use ISO dates.
1094
1095 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1096
1097         * Makefile.in (ChangeLog): New makefile variable.
1098         * README-HACKING: Mention the ChangeLog makefile variable.
1099
1100 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1101
1102         * tic80/: Delete directory.
1103
1104 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1105
1106         * MAINTAINERS: Update my email address.
1107
1108 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1109
1110         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1111
1112 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1113
1114         * MAINTAINERS: Record self as a co-maintainer of just common/.
1115
1116 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1117
1118         * MAINTAINERS: Point to GDB files describing overall maintaince
1119         and check-in procedures.
1120
1121 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1122
1123         * MAINTAINERS: Add myself for ARM portions.
1124
1125 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1126
1127         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1128         * configure: Re-generate.
1129
1130 2001-02-16  Ben Elliston  <bje@redhat.com>
1131
1132         * MAINTAINERS: Add myself for common portions.
1133
1134 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1135
1136         * MAINTAINERS: Added self and Andrew for the mips sim.
1137
1138 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1139
1140         * MAINTAINERS: Added self and Andrew for the ppc sim.
1141
1142 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1143
1144         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1145         * m68hc11: New directory.
1146         * configure.in: Add.
1147         * configure: Regenerate.
1148
1149 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1150
1151         * tic80: New directory.
1152         * configure.in: Add configury.
1153         * configure: Regenerate.
1154
1155 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1156
1157         * configure.in (extra_subdirs): Add testsuite to strongarm
1158         directories.
1159         * configure: Regenerate.
1160
1161 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1162
1163         * MAINTAINERS: New file.  Blank.
1164
1165 1999-11-18  Ben Elliston  <bje@cygnus.com>
1166
1167         * configure.in: Require autoconf 2.13 and remove obsolete
1168         invocation of AC_C_CROSS.
1169         * configure: Regenerate.
1170
1171 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1172
1173         * configure.in: Configure the testsuite directory for thumb.
1174         * configure: Regenerate.
1175
1176 1999-07-16  Ben Elliston  <bje@cygnus.com>
1177
1178         * configure.in: Configure the testsuite directory for arm.
1179         * configure: Regenerate.
1180
1181 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1182
1183         * configure.in: Add support for MCore target.
1184         * configure: Regenerate.
1185
1186 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1187
1188         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1189         RUNTEST instead of commenting out, fixes portability problem.
1190
1191 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1192
1193         * configure.in: Add support for StrongARM target.
1194         * configure: Regenerate.
1195
1196 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1197
1198         * configure.in: Require autoconf 2.12.1 or higher.
1199
1200 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1201
1202         * configure.in (i960-*-*): Add.
1203         * configure: Rebuild.
1204
1205 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1206
1207         * configure.in: Added case for fr30-*-*.
1208         * configure: Regenerated.
1209
1210 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1211
1212         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1213         to allow successful operation on Windows.
1214
1215 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1216
1217         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1218         check can be invoked recursively.
1219
1220 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1221
1222         * configure.in: Build simulator on sparclite and sparc86x targets.
1223         * configure: Regenerate.
1224
1225 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1226
1227         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1228         to autoconf and autoheader.
1229
1230 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1231
1232         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1233         ../common' to autoconf and autoheader.  Unconditionally run
1234         autoconf in every subdir.
1235         (autoconf-changelog autoheader-changelog): Unconditionally run
1236         commands in every subdir.
1237         (autoconf-install autoheader-install): Likewise.
1238
1239 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1240
1241         * Makefile.in:  Get SHELL from configure.
1242         * (FLAGS_TO_PASS):  Pass down SHELL.
1243         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1244         NT native builds.
1245
1246 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1247
1248         * configure.in (extra_subdirs): Enable igen for mn10300.
1249         * configure: Re-generate.
1250
1251 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1252
1253         * configure.in (extra_subdirs): Add support for thumb target.
1254
1255         * configure (extra_subdirs): Add support for thumb target.
1256
1257 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1258
1259         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1260         target.
1261         * configure: Regenerate.
1262
1263 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1264
1265         * configure.in (extra_subdirs): v850ea needs igen.
1266         * configure: Re-generate.
1267
1268 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1269
1270         * configure.in (testdir): When a testsuite directory, add that to
1271         the list of confdirs.
1272
1273 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1274
1275         * configure.in (extra_subdirs): Enable igen ready for V850.
1276
1277 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1278
1279         * configure.in (w65-*-*, only_if_enabled): Set.
1280         * configure: Re-generate.
1281
1282 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1283
1284         * configure.in (sparc*-*-*, only_if_enabled): Set
1285         only_if_enabled=yes.  Check only_if_enabled before enabling a
1286         simulator.
1287         * configure: Regenerate.
1288
1289 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1290
1291         * configure.in (extra_subdirs): Add v850e target.
1292
1293 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1294
1295         * configure.in (extra_subdirs): Add v850ea target.
1296
1297 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1298
1299         * configure.in (sparc*-*-*): Don't build erc32.
1300         * configure: Regenerate.
1301
1302 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1303
1304         * configure.in (m32r-*-*): New target.
1305         * configure: Regenerate.
1306
1307         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1308
1309 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1310
1311         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1312         thought that .NOEXPORT was the default target.
1313
1314 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1315
1316         * Makefile.in (clean mostlyclean): Restore targets accidentally
1317         deleted in earlier change.
1318
1319 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1320
1321         * Makefile.in (autoheader-common, autoheader-changelog,
1322         autoheader-install): Perform autoheader in addition to autoconf.
1323
1324 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1325
1326         * Makefile.in (autoconf-install): New target.
1327         (autoconf-changelog): Try different way to obtain user name.
1328
1329 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1330
1331         * Makefile.in (autoconf-changelog): New target, update
1332         ChangeLog for all subdirectories - normally used after
1333         autoconf-common target.
1334
1335 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1336
1337         * configure.in (extra_subdirs): Include testsuite for d30v.
1338         * configure: Regenerate.
1339
1340         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1341         ../gdb/Makefile.in
1342         (check): New rules - drive the testsuite.
1343
1344 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1345
1346         * configure.in: Add mn10200 configure lines accidentally
1347         removed.
1348         * configure: Regenerated.
1349
1350 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1351
1352         * configure.in (extra_subdirs): Generalize common sub directory
1353         into a list.
1354         (extra_subdirs): For d30v add igen to the list to be built.
1355
1356 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1357
1358         * configure.in (d30v): New target.
1359         * configure: Regenerated.
1360
1361 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1362
1363         * configure.in: Don't require GCC to build the mn10200
1364         simulator anymore.
1365         * configure: Rebuilt.
1366
1367 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1368
1369         * configure.in: Don't configure any subdirs if no simulator
1370         is being built.  Don't use erc32 for sparc64.
1371         * configure: Regenerated.
1372
1373 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1374
1375         * Makefile.in (autoconf-common): New target.
1376         * configure.in: Do configure common.
1377         * configure: Regenerated.
1378
1379 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1380
1381         * configure configure.in:  Don't configure common anymore.  Files
1382         from common are now built in the individual simualtor directories.
1383         This fixes problems with the WinGDB build procedure.
1384
1385 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1386
1387         * configure: Enable the mn10200 simulator.
1388
1389 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1390
1391         * configure.in (configdirs): Add common.
1392         * configure: Regenerated.
1393
1394 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1395
1396         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1397         system V based targets.
1398         * configure: Regenerate.
1399
1400 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1401
1402         * configure.in (--enable-sim-powerpc): Delete.
1403         (--enable-sim): Add.
1404         * configure: Regenerated.
1405
1406 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1407
1408         * configure.in: Only build the V850 simulator if
1409         we are using gcc.
1410         * configure: Rebuild.
1411
1412 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1413
1414         * configure.in: Do build erc32 for DOS and Windows hosts.
1415         * configure: Rebuild.
1416
1417 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1418
1419         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1420         be inherited from the parent.  Remove INSTALL_XFORM and
1421         INSTALL_XFORM1.  Make INSTALL be set from configure.
1422
1423 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1424
1425         * configure.in: Only build the MIPS simulator if we are using
1426         gcc.
1427         * configure: Rebuild.
1428
1429 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1430
1431         * configure.in (v850-*-*): Added V850 simulator.
1432
1433 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1434
1435         * configure.in (d10v-*-*): Added D10V simulator.
1436
1437 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1438
1439         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1440         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1441         (docdir): Removed.
1442         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1443         (AC_PROG_INSTALL): Added.
1444         * configure: Rebuilt.
1445
1446 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1447
1448         * configure.in: Only configure erc32 if using gcc.
1449         * configure: Rebuild.
1450
1451 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1452
1453         * configure.in (sim_target): Build PowerPC simulator for powerpc
1454         System V.4, Solaris, and Elf targets.
1455         * configure: Regenerate with autoconf 2.10.
1456
1457 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1458
1459         * configure.in: Only built erc32 simulator on Unix hosts as it
1460         uses pseudo ttys.
1461         * configure: Regenerated with autoconf 2.8.
1462
1463 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1464
1465         * erc32: Sparc simulator from the ESA.
1466
1467 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1468
1469         From: Miles Bader  <miles@gnu.ai.mit.edu>
1470         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1471         * configure: Regenerate using autoconf.
1472
1473 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1474
1475         * Makefile.in (install): Fix typo.
1476
1477 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1478
1479         * configure: Regenerate with autoconf 2.7.
1480
1481         * Makefile.in (all): Simplify.
1482         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1483         as in the all target.
1484         (distclean, maintainer-clean, realclean): Likewise.
1485         (install): Likewise.
1486
1487 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1488
1489         * Makefile.in (all): Remove extra '\' char from shell script.
1490
1491 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1492
1493         * Makefile.in (all): Avoid a for loop with zero elements, even if
1494         the loop will not be executed because of an if statement.
1495
1496 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1497
1498         * Makefile.in (install): Add missing semicolon in "fi \".
1499
1500 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1501
1502         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1503         defaults from configure.
1504
1505         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1506         configure defaults.
1507         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1508         if either --enable-sim-powerpc is used, or the host compiler is
1509         GCC.
1510
1511 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1512
1513         * configure.in (mips*-*-*): Added "mips" simulator target.
1514         * configure: Re-generated.
1515
1516 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1517
1518         * Makefile.in (BISON): Remove macro.
1519         (FLAGS_TO_PASS): Remove BISON.
1520
1521 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1522
1523         * configure.in:  Explicitly `exit 0' for broken shells.
1524         * configure:  Rebuilt.
1525
1526 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1527
1528         * common/run.c (main): Initialize the callbacks.
1529
1530 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1531
1532         * Makefile.in (maintainer-clean): New synonym for realclean.
1533
1534 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1535
1536         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1537         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1538
1539 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1540
1541         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1542         <cagney@highland.com.au>.
1543         * configure: Regnerate from configure.in.
1544
1545 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1546
1547         * Update all FSF addresses except those in COPYING* files.
1548
1549 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1550
1551         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1552         submakes either default or passed in value.
1553
1554 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1555
1556         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1557           install): Changed targets so that they descend all
1558           subdirectories in $(SUBDIRS).
1559           (*-all, *-clean, *-install): Removed targets.
1560
1561         * configure.in: Don't bother with target makefile fragments, they
1562           are no longer needed.
1563         * configure: regenerated.
1564
1565         * Makefile.in, configure.in: converted to autoconf.
1566         * configure: New file, generated with autconf 2.4.
1567
1568 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1569
1570         * Makefile.in: Support ARM.
1571         * configure.in: Ditto.
1572
1573 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1574
1575         * Makefile.in: Support W65.
1576         * configure.in: Ditto.
1577
1578 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1579
1580         * Makefile.in: Add TAGS target.
1581
1582 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1583
1584         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1585           install-h8300, clean-h8300, all-h8500, install-h8500,
1586           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1587           recursion lines.
1588
1589 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1590
1591         * Makefile.in: remove endian.h trace from h8500
1592
1593 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1594
1595         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1596
1597 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1598
1599         * Makefile.in: make all of the all-* target (except all-nothing)
1600         depend on endian.h, so that if we're not building a simulator, we
1601         don't built endian
1602
1603 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1604
1605         * Makefile.in (check, installcheck): Added dummy targets.
1606
1607 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1608
1609         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1610         explicitly make it, since some makes apparently don't work with
1611         VPATH and .c to executable rules (SunOS make for example).
1612
1613 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1614
1615         * Makefile.in (endian): Add explicit rule for broken makes.
1616
1617 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1618
1619         * Makefile.in (info, install-info): New targets.
1620         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1621         level Makefile.
1622
1623 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1624
1625         * Makefile.in (endian.h): build endian.h via a temporary file so
1626           that we don't leave an incomplete file lying around on
1627           interrupted builds.
1628           (clean): remove endian, e.h, and endian.h.
1629
1630 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1631
1632         * Makefile.in, configure.in: if target isn't supported, build a
1633         harmless makefile.
1634
1635