sim/ChangeLog

   1 2009-11-12  Tristan Gingold  <gingold@adacore.com>
   2
   3         * avr/interp.c (sim_load): Clear memory before loading.
   4
   5 2009-11-09  Tristan Gingold  <gingold@adacore.com>
   6
   7         * avr/interp.c (sim_resume): Fix typo for OP_ret.
   8
   9 2009-10-23  Doug Evans  <dje@sebabeach.org>
  10
  11         * cris/arch.c: Regenerate.
  12         * cris/arch.h: Regenerate.
  13         * cris/cpuall.h: Regenerate.
  14         * cris/cpuv10.c: Regenerate.
  15         * cris/cpuv10.h: Regenerate.
  16         * cris/cpuv32.c: Regenerate.
  17         * cris/cpuv32.h: Regenerate.
  18         * cris/cris-desc.c: Regenerate.
  19         * cris/cris-desc.h: Regenerate.
  20         * cris/cris-opc.h: Regenerate.
  21         * cris/decodev10.c: Regenerate.
  22         * cris/decodev10.h: Regenerate.
  23         * cris/decodev32.c: Regenerate.
  24         * cris/decodev32.h: Regenerate.
  25         * cris/modelv10.c: Regenerate.
  26         * cris/modelv32.c: Regenerate.
  27         * cris/semcrisv10f-switch.c: Regenerate.
  28         * cris/semcrisv32f-switch.c: Regenerate.
  29
  30 2009-10-22  Tristan Gingold  <gingold@adacore.com>
  31
  32         * avr/interp.c (sim_stop): Return 1.
  33
  34 2009-10-16  Doug Evans  <dje@sebabeach.org>
  35
  36         * MAINTAINERS: Add myself as m32r maintainer.
  37
  38 2009-10-15  Michael Egaer  <eager@eagercon.com>
  39
  40         * MAINTAINERS: Add self as MicroBlaze maintainer.
  41
  42 2009-10-14  Ben Elliston  <bje@gnu.org>
  43
  44         * MAINTAINERS (common): Move myself to "past maintainers" section.
  45
  46 2009-10-06  Michael Eager  <eager@eagercon.com>
  47
  48         * microblaze/interp.c: Add include microblaze-dis.h.
  49
  50 2009-09-23  Michael Eager  <eager@eagercon.com>
  51
  52         * configure: Add microblaze-*.* (not regenerated).
  53         * configure.ac: Likewise.
  54         * microblaze/config.in: New.
  55         * microblaze/configure: Generate.
  56         * microblaze/configure.ac: New.
  57         * microblaze/interp.c: New.
  58         * microblaze/Makefile.in: New.
  59         * microblaze/microblaze.h: New.
  60         * microblaze/microblaze.isa: New.
  61         * microblaze/sim-main.h: New.
  62         * microblaze/sysdep.h: New.
  63
  64 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  65
  66         * avr/config.in: Regenerate.
  67         * avr/configure: Likewise.
  68         * configure: Likewise.
  69         * cris/config.in: Likewise.
  70         * cris/configure: Likewise.
  71
  72         * configure.ac: m4_include toplevel config/override.m4.
  73         * configure: Regenerate.
  74         * avr/configure: Regenerate.
  75         * cris/configure: Regenerate.
  76
  77 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  78
  79         * Makefile.in (datarootdir): New variable.
  80
  81 2009-05-18  Jon Beniston <jon@beniston.com>
  82
  83         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
  84         * configure.ac: Add lm32 target.
  85         * lm32: New directory.
  86
  87 2009-05-11  Andrew Cagney  <cagney@gnu.org>
  88
  89         * MAINTAINERS: Orphan ppc.
  90
  91 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
  92
  93         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
  94         m32c_signal_to_target.  Change signal return values from SIGILL,
  95         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
  96         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
  97
  98 2009-04-30  Anthony Green  <green@moxielogic.com>
  99
 100         * MAINTAINERS: Add myself for the moxie port.
 101         * moxie: New directory.
 102         * configure.ac: Add entry for moxie.
 103         * configure: Regenerate.
 104
 105 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 106
 107         * avr: New directory.
 108         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 109         * avr/config.in: New file, generated by autoheader.
 110         * avr/configure: New file generated by autoconf.
 111         * configure.ac: Add avr.
 112         * configure: Regenerated.
 113
 114 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 115
 116         * Makefile.in: Add dummy install-pdf, html, and
 117         install-html targets.
 118
 119 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 120
 121         * cris/sim-if.c: Include errno.h.
 122         (cris_start_address, cris_program_offset): New variables.
 123         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 124         enums.
 125         (cris_options): New options --cris-program-offset and
 126         --cris-start-address.
 127         (cris_option_handler): Handle new options.
 128         (cris_program_offset_write, cris_set_section_offset_iterator)
 129         (cris_offset_sections, cris_offset_sections): New functions.
 130         (sim_load): Use cris_program_offset_write as function argument to
 131         cris_load_elf_file, not sim_write.
 132         (struct offsetinfo): New struct.
 133         (cris_handle_interpreter): Fix typo in comment.
 134         (sim_open): Call cris_offset_sections as soon as the bfd of the
 135         infile is available.  Gate bfd validity checks on abfd non-NULL.
 136         (sim_create_inferior): Let cris_start_address when != -1 override
 137         other start-address choices.
 138
 139 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 140
 141         * cris/traps.c (abort): Define to call sim_io_error.
 142         (create_map): Make -1 imply a non-fixed address, not 0.  All
 143         callers changed.  Only prefer the next higher unmapped address if
 144         the last mapped address is no less than 0x40000000.  Check that
 145         the address to be mapped is not already mapped.  Update head
 146         comment.
 147         (unmap_pages): Don't call abort when recursive call fails, just
 148         note and return an error if a page in the range couldn't be unmapped.
 149         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 150         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 151         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 152         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 153         don't abort on page not being mapped.  Handle non-anon filemap
 154         with length padded to pagesize.
 155
 156 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 157
 158         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 159         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 160         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 161         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 162         (TARGET_AT_CLKTCK): Remove redundant macros.
 163         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 164         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 165         callers.
 166         (sim_open): Also pass AT_SECURE.
 167
 168         * cris/sim-main.h (struct _sim_cpu): New member
 169         set_target_thread_data.
 170         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 171         * cris/crisv10f.c: Ditto.
 172         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 173         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 174         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 175         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 176         case.
 177
 178         * cris/traps.c (TARGET_SYS_exit_group): Define.
 179         (cris_break_13_handler): Handle it like the exit for the last
 180         thread.
 181
 182         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 183         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 184         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 185         2.6.27.  Set machine field to the BFD printable name of the
 186         machine.
 187
 188         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 189         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 190         TARGET_MAP_DENYWRITE.
 191
 192         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 193         (TARGET_X_OK, TARGET_F_OK): Define.
 194         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 195
 196         * cris/semcrisv32f-switch.c: Regenerate.
 197
 198 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 199
 200         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 201         just a short CRIS-specific notice.  Tweak the wording for a
 202         failing architecture test.
 203
 204         * cris/traps.c (TARGET_SYS_writev): New macro.
 205         (is_mapped_only, cris_dump_map): New functions.
 206         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 207         and prot combinations and a non-zero page-offset.  If
 208         TARGET_MAP_FIXED, unmap pages before mapping them.
 209         <case TARGET_SYS_mprotect>: When checking, allow any length
 210         argument.  Don't actually do anything.
 211         <case TARGET_SYS_writev>: New case.
 212
 213         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 214         * cris/sim-if.c: Include elf-bfd.h.
 215         (struct progbounds): New members end_loadmem, start_nonloadmem.
 216         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 217         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 218         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 219         static.  Update head comment.  Set new struct progbounds members.
 220         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 221         variables.
 222         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 223         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 224         functions.
 225         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 226         handling to use auxv_entries.  Improve error message and checking
 227         for invalid programs.  Use new variable abfd for the program
 228         instead of for each access reaching into sd to get it.
 229         (sim_create_inferior): If non-zero, use interp_start_addr instead
 230         of the program start address.
 231         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 232         stale comment.  Always specify little-endian.
 233
 234 2008-07-29  Nick Clifton  <nickc@redhat.com>
 235
 236         * common/genmloop.sh: Add new parameter: -shell to specify the
 237         command interpreter to use to run the input file.  This is
 238         necessary because otherwise SHELL is taken from the user's
 239         environment, and not from the makefile that invoked this script
 240         and the user might not be running an sh-like shell.
 241         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 242         * fr30/Makefile.in: Likewise.
 243         * frv/Makefile.in: Likewise.
 244         * i960/Makefile.in: Likewise.
 245         * iq2000/Makefile.in: Likewise.
 246         * m32r/Makefile.in: Likewise.
 247
 248         * frv/mloop.in: Add missing start of line comment marker.
 249
 250 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 251
 252         * cris/configure: Regenerate to track ../common/common.m4 changes.
 253         * cris/config.in: Ditto.
 254
 255 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 256             Daniel Jacobowitz  <dan@codesourcery.com>
 257             Joseph Myers  <joseph@codesourcery.com>
 258
 259         * cris/configure: Regenerate.
 260
 261 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 262
 263         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 264
 265 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 266
 267         * MAINTAINERS: Add myself as maintainer of cr16 port.
 268
 269 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 270
 271         Add simulator for National cr16 processor.
 272         * cr16: New directory.
 273         * configure.ac: Add entry for National cr16.
 274         * configure: Regenerate.
 275
 276 2008-02-05  DJ Delorie  <dj@redhat.com>
 277
 278         * configure.ac (v850): V850 now has a testsuite.
 279         * configure (v850): Likewise.
 280
 281 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 282
 283         Updated copyright notices for most files.
 284
 285 2007-12-19  DJ Delorie  <dj@redhat.com>
 286
 287         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 288         cut_point.
 289
 290 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 291
 292         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 293         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 294         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 295         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 296         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 297         cris/semcrisv32f-switch.c: Regenerate.
 298
 299 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 300
 301         Switch the license of all files explicitly copyright the FSF
 302         to GPLv3.
 303
 304 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 305
 306         * Makefile.in: Add dummy "pdf" target.
 307
 308 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 309
 310         * cris/traps.c (dump_statistics): Change format for cycle numbers
 311         to %llu and cast parameters to unsigned long long.
 312
 313 2007-02-16  Thiemo Seufer  <ths@mips.com>
 314
 315         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 316
 317 2007-01-28  Manuel Lauss  <slauss@resi.at>
 318
 319         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 320         (sh-*-*): Change to sh*-*-*.
 321         * configure: Regenerated.
 322
 323 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 324
 325         Updated copyright notices for most files.
 326
 327 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 328
 329         * Makefile.in (autoconf-common autoheader-common): Only run
 330         autoheader on subdirs with a file config.in.
 331
 332         * configure.ac (common): Make the default "yes" for all targets
 333         with sim subdirs.
 334         * configure: Regenerate.
 335
 336         * Makefile.in (autoconf-common autoheader-common): In documented
 337         usage, say SHELL=/bin/sh.
 338         (.PHONY): Add autoheader-common.
 339
 340         * MAINTAINERS: Add self as authorized committer for *.
 341
 342 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 343             Hans-Peter Nilsson  <hp@axis.com>
 344
 345         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 346         (cris_unknown_syscall_action): Declare.
 347         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 348         (cris_options): Add cris-unknown-syscall option.
 349         (cris_option_handler): Correct comment about and error message for
 350         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 351         * cris/traps.c: Include stdarg.h
 352         (cris_unknown_syscall): New function.
 353         (cris_break_13_handler): Instead of sim_io_eprintf and
 354         sim_engine_halt, call cris_unknown_syscall to handle more or less
 355         unknown syscalls.  Adjust code as necessary to handle return
 356         value.
 357
 358 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 359
 360         * MAINTAINERS: Add Dave Brolley for sh64.
 361
 362 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 363
 364         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 365         (cris_pipe_empty): Correct initialization of "remaining".  Only
 366         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 367         are written.
 368
 369 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 370
 371         * cris/configure.ac: Check for limits.h and sys/param.h.
 372         * cris/configure, cris/config.in: Rebuild.
 373         * cris/traps.c (SIM_PATHMAX): New macro.
 374         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 375
 376 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 377
 378         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 379         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 380         * configure: Regenerated.
 381
 382 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 383
 384         * cris/configure: Regenerated.
 385
 386 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 387
 388         * cris/configure: Regenerated.
 389
 390 2006-05-05  Andreas Schwab  <schwab@suse.de>
 391
 392         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 393         * configure: Regenerate.
 394
 395         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 396         (CC_FOR_BUILD): Don't override.
 397         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 398
 399 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 400
 401         * MAINTAINERS: Add an "Authorized committers" section, and list
 402         DJ Delorie for v850.
 403
 404 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 405
 406         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 407
 408 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 409
 410         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 411         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 412         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 413         (all): Depend on rvdummy$(EXEEXT).
 414         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 415         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 416         default off.
 417         * cris/configure: Regenerate.
 418         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 419         (enum cris_interrupt_type, crisv10deliver_interrupt)
 420         (crisv32deliver_interrupt: New declarations.
 421         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 422         sim_events_tickn and set state-events member work_pending when it's
 423         time for the next event.
 424         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 425         interrupt-delivery function.
 426         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 427         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 428         * cris/devices.c: Include hw-device.h.
 429         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 430         (device_io_write_buffer): Only perform 0x900000xx-functions if
 431         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 432         call hw_io_write_buffer.  Add return 0 last in function.
 433         * cris/sim-if.c (cris_have_900000xxif): Now global.
 434         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 435         Force "-model" option, effectively.
 436         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 437         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 438
 439 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 440
 441         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 442         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 443         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 444
 445 2006-03-13  DJ Delorie  <dj@redhat.com>
 446
 447         * MAINTAINERS: Add self as m32c sim maintainer.
 448
 449 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 450
 451         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 452         mapping.
 453         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 454
 455 2006-01-23  Jim Blandy  <jimb@redhat.com>
 456
 457         Add simulator for Renesas M32C and M16C.
 458
 459         * m32c: New directory.
 460         * configure.ac: Add entry for Renesas M32C.
 461         * configure: Regenerate.
 462
 463 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 464
 465         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 466         cycle count for the current insn.
 467
 468 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 469
 470         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 471         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 472         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 473         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 474
 475 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 476
 477         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 478         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 479         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 480         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 481         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 482         cris/semcrisv32f-switch.c: Regenerate.
 483
 484 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 485
 486         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 487         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 488         TARGET_O_WRONLY.
 489         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 490         F_GETFL on fd 0, 1 and 2.
 491
 492 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 493
 494         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 495         last_open_fd, last_open_flags.
 496         * cris/traps.c: Don't include targ-vals.h.
 497         (TARGET_O_ACCMODE): Define.
 498         (cris_break_13_handler): Set new _sim_cpu members.
 499         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 500         Rearrange code as switch.  Emit "unimplemented" abort for
 501         unimplemented fcntl calls.
 502
 503         * cris/traps.c (TARGET_SYS_stat): Define.
 504         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 505         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 506
 507 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 508
 509         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 510         low 32 bits are used after an unsigned long cast.
 511
 512 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 513
 514         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 515
 516 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 517
 518         * MAINTAINERS: Update my mail address, move myself to the
 519         "Past maintainers" section.
 520
 521 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 522
 523         * configure.ac: Add igen to v850 build.
 524         * configure: Regenerate.
 525
 526 2005-04-29  Paul Brook  <paul@codesourcery.com>
 527
 528         * common/callback.c (PIPE_BUF): Provide default definition.
 529         (os_lstat): Use stat if lstat is not available on the host.
 530         (os_ftruncate): Return EINVAL if not available on the host.
 531         (os_truncate): Ditto.
 532         * common/configure.ac: Check for lstat, truncate and ftruncate.
 533         * common/configure: Regenerate.
 534         * common/config.in: Regenerate.
 535
 536 2005-04-27  Paul Brook  <paul@codesourcery.com>
 537
 538         * common/Make-common.in: Add $(EXEEXT) to "run".
 539
 540 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 541
 542         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 543         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 544         implemented.  In call to create_map, pad length argument to 8k.
 545
 546 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 547
 548         * configure.ac: Add explicit sh64 case.
 549         * configure: Regenerate.
 550
 551 2005-03-30  Paul Brook  <paul@codesourcery.com>
 552
 553         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 554
 555 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 556
 557         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 558         include cgen-ops.h in decodev10.c and decodev32.c.
 559         * cris/sim-main.h: Don't include cgen-ops.h here.
 560         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 561         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 562         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 563         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 564         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 565         cris/semcrisv32f-switch.c: Regenerate.
 566
 567         * cris/traps.c (cris_break_13_handler) <case
 568         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 569         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 570
 571 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 572
 573         * cris/configure: Regenerate.
 574
 575 2005-02-28  Jim Blandy  <jimb@redhat.com>
 576
 577         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 578         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 579         Regenerated, after change to common/aclocal.m4.
 580
 581 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 582
 583         * iq2000: New target subdirectory.
 584         * configure.ac: Add iq2000 target.
 585         * configure: Regenerate.
 586
 587 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 588
 589         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 590         (realclean, install): Fail if subdir make failed.
 591
 592 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 593
 594         * cris: New directory, simulator for Axis Communications CRIS
 595         including CRIS v32, CGEN-based.
 596         * configure.ac: Add corresponding configury.
 597         * configure: Regenerate.
 598
 599 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 600
 601         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 602         common directory.  Remove sparc*-*-* from list.
 603
 604 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 605
 606         * Makefile.in (autoconf-common autoheader-common): Add --force to
 607         autoconf and autoheader.
 608         (autoconf-common autoheader-common)
 609         (autoconf-install autoheader-install): Check for configure.ac, not
 610         configure.in.
 611         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 612         * configure: Re-generate.
 613
 614 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 615
 616         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 617         correctly calls AC_CONFIG_SUBDIRS.
 618         * configure: Re-generate.
 619
 620 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 621
 622         * i960, h8500: Delete directory.
 623
 624 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 625
 626         * d30v, fr30, mn10200, z8k: Delete directory.
 627
 628 2004-03-10  Ben Elliston  <bje@gnu.org>
 629
 630         * MAINTAINERS: Update my mail address.
 631
 632 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 633
 634         * configure.in (mips*-*-*): Configure in testsuite.
 635         * configure: Regenerate.
 636
 637 2003-10-08  Dave Brolley  <brolley@redhat.com>
 638
 639         * configure.in: Move frv handling to alphabetically correct placement.
 640
 641 2003-09-03  Andreas Schwab  <schwab@suse.de>
 642
 643         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 644
 645 2003-08-29  Dave Brolley  <brolley@redhat.com>
 646
 647         * MAINTAINERS: Add myself as maintainer of the FRV port.
 648
 649 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 650             Dave Brolley  <brolley@redhat.com>
 651
 652         * frv/: New directory, simulator for the Fujitsu FRV.
 653         * configure.in: Add frv configury.
 654         * configure: Regenerate.
 655
 656 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 657
 658         * MAINTAINERS: Update my mail address.
 659
 660 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 661
 662         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 663         maintenance.  List igen and sh maintainers.  Mention that target
 664         and global maintainers pick up the slack.
 665
 666 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 667
 668         * configure.in: Add testsuite to extra_subdirs for sh.
 669         * configure: Regenerate.
 670
 671 2003-01-23  Nick Clifton  <nickc@redhat.com>
 672
 673         * Add sh2e support:
 674
 675 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 676
 677         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 678
 679 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 680
 681         * MAINTAINERS: Update my email address.
 682
 683 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 684
 685         * w65/: Delete directory.
 686
 687 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 688
 689         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 690         * configure: Re-generate.
 691
 692 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 693
 694         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 695         * configure: Re-generate.
 696
 697 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 698
 699         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 700         id, date and host to be overriden by NAME, ID, DATE and HOST
 701         respectfully.  Use ISO dates.
 702
 703 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 704
 705         * Makefile.in (ChangeLog): New makefile variable.
 706         * README-HACKING: Mention the ChangeLog makefile variable.
 707
 708 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 709
 710         * tic80/: Delete directory.
 711
 712 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 713
 714         * MAINTAINERS: Update my email address.
 715
 716 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 717
 718         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 719
 720 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 721
 722         * MAINTAINERS: Record self as a co-maintainer of just common/.
 723
 724 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 725
 726         * MAINTAINERS: Point to GDB files describing overall maintaince
 727         and check-in procedures.
 728
 729 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 730
 731         * MAINTAINERS: Add myself for ARM portions.
 732
 733 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 734
 735         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 736         * configure: Re-generate.
 737
 738 2001-02-16  Ben Elliston  <bje@redhat.com>
 739
 740         * MAINTAINERS: Add myself for common portions.
 741
 742 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 743
 744         * MAINTAINERS: Added self and Andrew for the mips sim.
 745
 746 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 747
 748         * MAINTAINERS: Added self and Andrew for the ppc sim.
 749
 750 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 751
 752         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 753         * m68hc11: New directory.
 754         * configure.in: Add.
 755         * configure: Regenerate.
 756
 757 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 758
 759         * tic80: New directory.
 760         * configure.in: Add configury.
 761         * configure: Regenerate.
 762
 763 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 764
 765         * configure.in (extra_subdirs): Add testsuite to strongarm
 766         directories.
 767         * configure: Regenerate.
 768
 769 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 770
 771         * MAINTAINERS: New file.  Blank.
 772
 773 1999-11-18  Ben Elliston  <bje@cygnus.com>
 774
 775         * configure.in: Require autoconf 2.13 and remove obsolete
 776         invocation of AC_C_CROSS.
 777         * configure: Regenerate.
 778
 779 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 780
 781         * configure.in: Configure the testsuite directory for thumb.
 782         * configure: Regenerate.
 783
 784 1999-07-16  Ben Elliston  <bje@cygnus.com>
 785
 786         * configure.in: Configure the testsuite directory for arm.
 787         * configure: Regenerate.
 788
 789 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 790
 791         * configure.in: Add support for MCore target.
 792         * configure: Regenerate.
 793
 794 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 795
 796         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 797         RUNTEST instead of commenting out, fixes portability problem.
 798
 799 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 800
 801         * configure.in: Add support for StrongARM target.
 802         * configure: Regenerate.
 803
 804 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 805
 806         * configure.in: Require autoconf 2.12.1 or higher.
 807
 808 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 809
 810         * configure.in (i960-*-*): Add.
 811         * configure: Rebuild.
 812
 813 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 814
 815         * configure.in: Added case for fr30-*-*.
 816         * configure: Regenerated.
 817
 818 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 819
 820         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 821         to allow successful operation on Windows.
 822
 823 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 824
 825         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 826         check can be invoked recursively.
 827
 828 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 829
 830         * configure.in: Build simulator on sparclite and sparc86x targets.
 831         * configure: Regenerate.
 832
 833 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 834
 835         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 836         to autoconf and autoheader.
 837
 838 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 839
 840         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 841         ../common' to autoconf and autoheader.  Unconditionally run
 842         autoconf in every subdir.
 843         (autoconf-changelog autoheader-changelog): Unconditionally run
 844         commands in every subdir.
 845         (autoconf-install autoheader-install): Likewise.
 846
 847 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 848
 849         * Makefile.in:  Get SHELL from configure.
 850         * (FLAGS_TO_PASS):  Pass down SHELL.
 851         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 852         NT native builds.
 853
 854 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 855
 856         * configure.in (extra_subdirs): Enable igen for mn10300.
 857         * configure: Re-generate.
 858
 859 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 860
 861         * configure.in (extra_subdirs): Add support for thumb target.
 862
 863         * configure (extra_subdirs): Add support for thumb target.
 864
 865 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 866
 867         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 868         target.
 869         * configure: Regenerate.
 870
 871 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 872
 873         * configure.in (extra_subdirs): v850ea needs igen.
 874         * configure: Re-generate.
 875
 876 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 877
 878         * configure.in (testdir): When a testsuite directory, add that to
 879         the list of confdirs.
 880
 881 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 882
 883         * configure.in (extra_subdirs): Enable igen ready for V850.
 884
 885 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 886
 887         * configure.in (w65-*-*, only_if_enabled): Set.
 888         * configure: Re-generate.
 889
 890 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 891
 892         * configure.in (sparc*-*-*, only_if_enabled): Set
 893         only_if_enabled=yes.  Check only_if_enabled before enabling a
 894         simulator.
 895         * configure: Regenerate.
 896
 897 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 898
 899         * configure.in (extra_subdirs): Add v850e target.
 900
 901 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 902
 903         * configure.in (extra_subdirs): Add v850ea target.
 904
 905 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 906
 907         * configure.in (sparc*-*-*): Don't build erc32.
 908         * configure: Regenerate.
 909
 910 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 911
 912         * configure.in (m32r-*-*): New target.
 913         * configure: Regenerate.
 914
 915         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 916
 917 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 918
 919         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 920         thought that .NOEXPORT was the default target.
 921
 922 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 923
 924         * Makefile.in (clean mostlyclean): Restore targets accidentally
 925         deleted in earlier change.
 926
 927 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 928
 929         * Makefile.in (autoheader-common, autoheader-changelog,
 930         autoheader-install): Perform autoheader in addition to autoconf.
 931
 932 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
 933
 934         * Makefile.in (autoconf-install): New target.
 935         (autoconf-changelog): Try different way to obtain user name.
 936
 937 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 938
 939         * Makefile.in (autoconf-changelog): New target, update
 940         ChangeLog for all subdirectories - normally used after
 941         autoconf-common target.
 942
 943 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 944
 945         * configure.in (extra_subdirs): Include testsuite for d30v.
 946         * configure: Regenerate.
 947
 948         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
 949         ../gdb/Makefile.in
 950         (check): New rules - drive the testsuite.
 951
 952 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
 953
 954         * configure.in: Add mn10200 configure lines accidentally
 955         removed.
 956         * configure: Regenerated.
 957
 958 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 959
 960         * configure.in (extra_subdirs): Generalize common sub directory
 961         into a list.
 962         (extra_subdirs): For d30v add igen to the list to be built.
 963
 964 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 965
 966         * configure.in (d30v): New target.
 967         * configure: Regenerated.
 968
 969 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
 970
 971         * configure.in: Don't require GCC to build the mn10200
 972         simulator anymore.
 973         * configure: Rebuilt.
 974
 975 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
 976
 977         * configure.in: Don't configure any subdirs if no simulator
 978         is being built.  Don't use erc32 for sparc64.
 979         * configure: Regenerated.
 980
 981 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
 982
 983         * Makefile.in (autoconf-common): New target.
 984         * configure.in: Do configure common.
 985         * configure: Regenerated.
 986
 987 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
 988
 989         * configure configure.in:  Don't configure common anymore.  Files
 990         from common are now built in the individual simualtor directories.
 991         This fixes problems with the WinGDB build procedure.
 992
 993 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
 994
 995         * configure: Enable the mn10200 simulator.
 996
 997 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
 998
 999         * configure.in (configdirs): Add common.
1000         * configure: Regenerated.
1001
1002 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1003
1004         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1005         system V based targets.
1006         * configure: Regenerate.
1007
1008 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1009
1010         * configure.in (--enable-sim-powerpc): Delete.
1011         (--enable-sim): Add.
1012         * configure: Regenerated.
1013
1014 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1015
1016         * configure.in: Only build the V850 simulator if
1017         we are using gcc.
1018         * configure: Rebuild.
1019
1020 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1021
1022         * configure.in: Do build erc32 for DOS and Windows hosts.
1023         * configure: Rebuild.
1024
1025 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1026
1027         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1028         be inherited from the parent.  Remove INSTALL_XFORM and
1029         INSTALL_XFORM1.  Make INSTALL be set from configure.
1030
1031 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1032
1033         * configure.in: Only build the MIPS simulator if we are using
1034         gcc.
1035         * configure: Rebuild.
1036
1037 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1038
1039         * configure.in (v850-*-*): Added V850 simulator.
1040
1041 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1042
1043         * configure.in (d10v-*-*): Added D10V simulator.
1044
1045 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1046
1047         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1048         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1049         (docdir): Removed.
1050         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1051         (AC_PROG_INSTALL): Added.
1052         * configure: Rebuilt.
1053
1054 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1055
1056         * configure.in: Only configure erc32 if using gcc.
1057         * configure: Rebuild.
1058
1059 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1060
1061         * configure.in (sim_target): Build PowerPC simulator for powerpc
1062         System V.4, Solaris, and Elf targets.
1063         * configure: Regenerate with autoconf 2.10.
1064
1065 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1066
1067         * configure.in: Only built erc32 simulator on Unix hosts as it
1068         uses pseudo ttys.
1069         * configure: Regenerated with autoconf 2.8.
1070
1071 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1072
1073         * erc32: Sparc simulator from the ESA.
1074
1075 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1076
1077         From: Miles Bader  <miles@gnu.ai.mit.edu>
1078         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1079         * configure: Regenerate using autoconf.
1080
1081 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1082
1083         * Makefile.in (install): Fix typo.
1084
1085 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1086
1087         * configure: Regenerate with autoconf 2.7.
1088
1089         * Makefile.in (all): Simplify.
1090         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1091         as in the all target.
1092         (distclean, maintainer-clean, realclean): Likewise.
1093         (install): Likewise.
1094
1095 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1096
1097         * Makefile.in (all): Remove extra '\' char from shell script.
1098
1099 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1100
1101         * Makefile.in (all): Avoid a for loop with zero elements, even if
1102         the loop will not be executed because of an if statement.
1103
1104 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1105
1106         * Makefile.in (install): Add missing semicolon in "fi \".
1107
1108 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1109
1110         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1111         defaults from configure.
1112
1113         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1114         configure defaults.
1115         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1116         if either --enable-sim-powerpc is used, or the host compiler is
1117         GCC.
1118
1119 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1120
1121         * configure.in (mips*-*-*): Added "mips" simulator target.
1122         * configure: Re-generated.
1123
1124 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1125
1126         * Makefile.in (BISON): Remove macro.
1127         (FLAGS_TO_PASS): Remove BISON.
1128
1129 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1130
1131         * configure.in:  Explicitly `exit 0' for broken shells.
1132         * configure:  Rebuilt.
1133
1134 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1135
1136         * common/run.c (main): Initialize the callbacks.
1137
1138 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1139
1140         * Makefile.in (maintainer-clean): New synonym for realclean.
1141
1142 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1143
1144         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1145         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1146
1147 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1148
1149         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1150         <cagney@highland.com.au>.
1151         * configure: Regnerate from configure.in.
1152
1153 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1154
1155         * Update all FSF addresses except those in COPYING* files.
1156
1157 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1158
1159         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1160         submakes either default or passed in value.
1161
1162 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1163
1164         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1165           install): Changed targets so that they descend all
1166           subdirectories in $(SUBDIRS).
1167           (*-all, *-clean, *-install): Removed targets.
1168
1169         * configure.in: Don't bother with target makefile fragments, they
1170           are no longer needed.
1171         * configure: regenerated.
1172
1173         * Makefile.in, configure.in: converted to autoconf.
1174         * configure: New file, generated with autconf 2.4.
1175
1176 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1177
1178         * Makefile.in: Support ARM.
1179         * configure.in: Ditto.
1180
1181 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1182
1183         * Makefile.in: Support W65.
1184         * configure.in: Ditto.
1185
1186 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1187
1188         * Makefile.in: Add TAGS target.
1189
1190 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1191
1192         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1193           install-h8300, clean-h8300, all-h8500, install-h8500,
1194           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1195           recursion lines.
1196
1197 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1198
1199         * Makefile.in: remove endian.h trace from h8500
1200
1201 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1202
1203         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1204
1205 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1206
1207         * Makefile.in: make all of the all-* target (except all-nothing)
1208         depend on endian.h, so that if we're not building a simulator, we
1209         don't built endian
1210
1211 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1212
1213         * Makefile.in (check, installcheck): Added dummy targets.
1214
1215 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1216
1217         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1218         explicitly make it, since some makes apparently don't work with
1219         VPATH and .c to executable rules (SunOS make for example).
1220
1221 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1222
1223         * Makefile.in (endian): Add explicit rule for broken makes.
1224
1225 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1226
1227         * Makefile.in (info, install-info): New targets.
1228         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1229         level Makefile.
1230
1231 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1232
1233         * Makefile.in (endian.h): build endian.h via a temporary file so
1234           that we don't leave an incomplete file lying around on
1235           interrupted builds.
1236           (clean): remove endian, e.h, and endian.h.
1237
1238 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1239
1240         * Makefile.in, configure.in: if target isn't supported, build a
1241         harmless makefile.
1242
1243