sim/ChangeLog

   1 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
   2
   3         * sim-base.h: Add 'extern C' if header is compiled with C++.
   4
   5 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
   6
   7         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
   8         cgen source tree.
   9         * cris/configure: Regenerate.
  10         * frv/configure: Regenerate.
  11         * iq2000/configure: Regenerate.
  12         * lm32/configure: Regenerate.
  13         * m32r/configure: Regenerate.
  14         * or1k/configure: Regenerate.
  15         * sh64/configure: Regenerate.
  16
  17 2018-10-05  Stafford Horne  <shorne@gmail.com>
  18
  19         * or1k/cpu.h: Regenerate.
  20         * or1k/decode.c: Regenerate.
  21         * or1k/decode.h: Regenerate.
  22         * or1k/model.c: Regenerate.
  23         * or1k/sem-switch.c: Regenerate.
  24         * or1k/sem.c: Regenerate:
  25
  26 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  27
  28         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  29         ISA maintenance.
  30
  31 2018-07-19  DJ Delorie  <dj@redhat.com>
  32
  33         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  34
  35 2018-07-14  Stafford Horne  <shorne@gmail.com>
  36
  37         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  38
  39 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  40
  41         * All configure.ac: Remove AC_PREREQ.
  42         * All configure: Re-generate.
  43
  44 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  45
  46         * MAINTAINERS: Update my company e-mail address.
  47
  48 2017-12-12  Stafford Horne  <shorne@gmail.com>
  49             Peter Gavin  <pgavin@gmail.com>
  50
  51         * configure: Regenerated.
  52         * or1k/aclocal.m4: Generated.
  53         * or1k/config.in: Generated.
  54         * or1k/configure: Generated.
  55
  56 2017-12-12  Stafford Horne  <shorne@gmail.com>
  57             Peter Gavin  <pgavin@gmail.com>
  58
  59         * or1k/arch.c: Generated.
  60         * or1k/arch.h: Generated.
  61         * or1k/cpu.c: Generated.
  62         * or1k/cpu.h: Generated.
  63         * or1k/cpuall.h: Generated.
  64         * or1k/decode.c: Generated.
  65         * or1k/decode.h: Generated.
  66         * or1k/model.c: Generated.
  67         * or1k/sem-switch.c: Generated.
  68         * or1k/sem.c: Generated.
  69
  70 2017-12-12  Stafford Horne  <shorne@gmail.com>
  71             Peter Gavin  <pgavin@gmail.com>
  72
  73         * configure.tgt: Add or1k sim.
  74         * or1k/README: New file.
  75         * or1k/Makefile.in: New file.
  76         * or1k/configure.ac: New file.
  77         * or1k/mloop.in: New file.
  78         * or1k/or1k-sim.h: New file.
  79         * or1k/or1k.c: New file.
  80         * or1k/sim-if.c: New file.
  81         * or1k/sim-main.h: New file.
  82         * or1k/traps.c: New file.
  83
  84 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
  85
  86         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
  87
  88 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  89
  90         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
  91
  92 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  93
  94         * MAINTAINERS (ft32): Add myself.
  95
  96 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
  97
  98         * MAINTAINERS (aarch64): Update my email address.
  99
 100 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 101
 102         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 103         * configure: Regenerate.
 104
 105 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 106
 107         * MAINTAINTERS (aarch64): Add myself.
 108
 109 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 110
 111         * MAINTAINERS (Maintainers for particular sims): Add myself as
 112         a MIPS maintainer.
 113
 114 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 115
 116         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 117
 118 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 119
 120         * configure.ac: Delete sim_common check and the
 121         AC_CONFIG_SUBDIRS(common) call.
 122         * configure: Regenerate.
 123         * configure.tgt (sim_common): Delete the variable.
 124
 125 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 126
 127         * .gitignore: Delete /common/cconfig.h entry.
 128
 129 2016-01-05  Nick Clifton  <nickc@redhat.com>
 130
 131         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 132
 133 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 134
 135         * aarch64/simulator.c: Remove syscall.h include.
 136
 137 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 138
 139         * README-HACKING: Delete mention of tconfig.h.
 140
 141 2015-11-24  Nick Clifton  <nickc@redhat.com>
 142
 143         * configure.tgt: Add aarch64 entry.
 144         * configure: Regenerate.
 145
 146 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 147
 148         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 149         * configure: Regenerate.
 150
 151 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 152
 153         * README-HACKING: Change configure.in to configure.ac.
 154
 155 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 156
 157         * arm/configure: Regenerated.
 158         * avr/configure: Likewise.
 159         * bfin/configure: Likewise.
 160         * common/configure: Likewise.
 161         * cr16/configure: Likewise.
 162         * cris/configure: Likewise.
 163         * d10v/configure: Likewise.
 164         * erc32/configure: Likewise.
 165         * frv/configure: Likewise.
 166         * ft32/configure: Likewise.
 167         * h8300/configure: Likewise.
 168         * igen/configure: Likewise.
 169         * iq2000/configure: Likewise.
 170         * lm32/configure: Likewise.
 171         * m32c/configure: Likewise.
 172         * m32r/configure: Likewise.
 173         * m68hc11/configure: Likewise.
 174         * mcore/configure: Likewise.
 175         * microblaze/configure: Likewise.
 176         * mips/configure: Likewise.
 177         * mn10300/configure: Likewise.
 178         * moxie/configure: Likewise.
 179         * msp430/configure: Likewise.
 180         * ppc/configure: Likewise.
 181         * rl78/configure: Likewise.
 182         * rx/configure: Likewise.
 183         * sh/configure: Likewise.
 184         * sh64/configure: Likewise.
 185         * v850/configure: Likewise.
 186
 187 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 188
 189         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 190         (BFD_LIB): Remove $(ZLIB).
 191         (CONFIG_LIBS): Add $(ZLIB).
 192         * ppc/Makefile.in (ZLIBINC): Removed.
 193         (INCLUDES): Remove $(ZLIBINC).
 194         (BFD_LIB): Remove $(ZLIB).
 195
 196 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 197
 198         * arm/configure: Regenerated.
 199         * avr/configure: Likewise.
 200         * bfin/configure: Likewise.
 201         * common/configure: Likewise.
 202         * cr16/configure: Likewise.
 203         * cris/configure: Likewise.
 204         * d10v/configure: Likewise.
 205         * erc32/configure: Likewise.
 206         * frv/configure: Likewise.
 207         * ft32/configure: Likewise.
 208         * h8300/configure: Likewise.
 209         * igen/configure: Likewise.
 210         * iq2000/configure: Likewise.
 211         * lm32/configure: Likewise.
 212         * m32c/configure: Likewise.
 213         * m32r/configure: Likewise.
 214         * m68hc11/configure: Likewise.
 215         * mcore/configure: Likewise.
 216         * microblaze/configure: Likewise.
 217         * mips/configure: Likewise.
 218         * mn10300/configure: Likewise.
 219         * moxie/configure: Likewise.
 220         * msp430/configure: Likewise.
 221         * ppc/configure: Likewise.
 222         * rl78/configure: Likewise.
 223         * rx/configure: Likewise.
 224         * sh/configure: Likewise.
 225         * sh64/configure: Likewise.
 226         * v850/configure: Likewise.
 227
 228 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 229
 230         * configure: Regenerate.
 231         * configure.ac: Delete sim_testsuite check and config in testsuite.
 232         * configure.tgt (sim_testsuite): Delete everywhere.
 233
 234 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 235
 236         * configure: Regenerate.
 237         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 238
 239 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 240
 241         * configure.tgt: Add FT32 entry.
 242         * configure: Regenerate.
 243
 244 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 245
 246         * .gitignore: Delete tconfig.h.
 247         * README-HACKING: Change tconfig.in to tconfig.h.
 248
 249 2014-03-12  Nick Clifton  <nickc@redhat.com>
 250
 251         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 252
 253 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 254
 255         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 256         * configure: Regenerate.
 257
 258 2014-01-06  Tom Tromey  <tromey@redhat.com>
 259
 260         * common/cgen-trace.c: Don't use old VA_* macros.
 261         * common/sim-load.c (xprintf): Likewise.
 262         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 263
 264 2014-01-06  Tom Tromey  <tromey@redhat.com>
 265
 266         * README-HACKING: Don't use PARAMS.
 267         * arm/wrapper.c: Don't use PARAMS.
 268         * bfin/sim-main.h: Don't use PARAMS.
 269         * common/callback.c: Don't use PARAMS.
 270         * common/cgen-trace.c: Don't use PARAMS.
 271         * common/run-sim.h: Don't use PARAMS.
 272         * common/run.c: Don't use PARAMS.
 273         * common/sim-base.h: Don't use PARAMS.
 274         * common/sim-load.c: Don't use PARAMS.
 275         * common/sim-options.h: Don't use PARAMS.
 276         * common/sim-trace.c: Don't use PARAMS.
 277         * common/sim-trace.h: Don't use PARAMS.
 278         * common/sim-utils.h: Don't use PARAMS.
 279         * cr16/cr16_sim.h: Don't use PARAMS.
 280         * cr16/gencode.c: Don't use PARAMS.
 281         * cr16/interp.c: Don't use PARAMS.
 282         * cr16/simops.c: Don't use PARAMS.
 283         * d10v/d10v_sim.h: Don't use PARAMS.
 284         * d10v/gencode.c: Don't use PARAMS.
 285         * d10v/interp.c: Don't use PARAMS.
 286         * d10v/simops.c: Don't use PARAMS.
 287         * erc32/erc32.c: Don't use PARAMS.
 288         * erc32/exec.c: Don't use PARAMS.
 289         * erc32/float.c: Don't use PARAMS.
 290         * erc32/func.c: Don't use PARAMS.
 291         * erc32/sis.c: Don't use PARAMS.
 292         * erc32/sis.h: Don't use PARAMS.
 293         * mips/interp.c: Don't use PARAMS.
 294         * mips/sim-main.h: Don't use PARAMS.
 295         * sh/interp.c: Don't use PARAMS.
 296         * v850/sim-main.h: Don't use PARAMS.
 297         * v850/v850_sim.h: Don't use PARAMS.
 298
 299 2013-11-07  Will Newton  <will.newton@linaro.org>
 300
 301         PR gdb/15508
 302         * arm/wrapper.c (sim_create_inferior): Call init before
 303         accessing STATE.
 304
 305 2013-11-07  Will Newton  <will.newton@linaro.org>
 306
 307         PR gdb/8989
 308         * arm/wrapper.c (sim_create_inferior): Avoid calling
 309         bfd_get_mach with a NULL bfd.
 310
 311 2013-06-21  Nick Clifton  <nickc@redhat.com>
 312
 313         * msp430: New Directory.
 314         * configure.tgt: Add it.
 315         * configure: Regenerate.
 316
 317 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 318
 319         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 320         * avr/interp.c (sim_complete_command): Ditto.
 321         * common/sim-options.c (sim_complete_command): Ditto.
 322         * cr16/interp.c (sim_complete_command): Ditto.
 323         * erc32/interf.c (sim_complete_command): Ditto.
 324         * m32c/gdb-if.c (sim_complete_command): Ditto.
 325         * microblaze/interp.c (sim_complete_command): Ditto.
 326         * ppc/sim_calls.c (sim_complete_command): Ditto.
 327         * rl78/gdb-if.c (sim_complete_command): Ditto.
 328         * rx/gdb-if.c (sim_complete_command): Ditto.
 329         * sh/interp.c (sim_complete_command): Ditto.
 330
 331 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 332
 333         Update year range in copyright notice of all files.
 334
 335 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 336
 337         Update old contact info in GPL license notices.
 338
 339 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 340
 341         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 342
 343 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 344
 345         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 346         condition.
 347         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 348         * arm/configure: Regenerate.
 349         * avr/configure: Regenerate.
 350         * bfin/configure: Regenerate.
 351         * common/configure: Regenerate.
 352         * cr16/configure: Regenerate.
 353         * cris/configure: Regenerate.
 354         * d10v/configure: Regenerate.
 355         * erc32/configure: Regenerate.
 356         * frv/configure: Regenerate.
 357         * h8300/configure: Regenerate.
 358         * igen/configure: Regenerate.
 359         * iq2000/configure: Regenerate.
 360         * lm32/configure: Regenerate.
 361         * m32c/configure: Regenerate.
 362         * m32r/configure: Regenerate.
 363         * m68hc11/configure: Regenerate.
 364         * mcore/configure: Regenerate.
 365         * microblaze/configure: Regenerate.
 366         * mips/configure: Regenerate.
 367         * mn10300/configure: Regenerate.
 368         * moxie/configure: Regenerate.
 369         * ppc/configure: Regenerate.
 370         * rl78/configure: Regenerate.
 371         * rx/configure: Regenerate.
 372         * sh/configure: Regenerate.
 373         * sh64/configure: Regenerate.
 374         * testsuite/configure: Regenerate.
 375         * v850/configure: Regenerate.
 376
 377 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 378
 379         * MAINTAINERS: Update my email address.
 380
 381 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 382
 383         * mips/basic.exp: Add mips*-mti-elf* target.
 384         * configure.ac: Add mips*-mti-elf* target.
 385         * configure: Regenerate.
 386
 387 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 388
 389         * configure: Regenerate.
 390
 391 2012-06-06  Michael Eager  <eager@eagercon.com>
 392
 393         * microblaze/interp.c (config.h): Add #include.
 394
 395 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 396
 397         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 398         Frysinger.
 399
 400 2011-11-28  DJ Delorie  <dj@redhat.com>
 401
 402         * configure.tgt: Add rl78 support.
 403         * configure: Regenerate.
 404         * rl78: New directory.
 405         * MAINTAINERS: Add myself as RL78 maintainer.
 406
 407 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 408
 409         * MAINTAINERS: Remove Thiemo Seufer.
 410
 411 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 412
 413         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 414         * configure: Regenerate.
 415
 416 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 417
 418         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 419         handle targets.
 420         * configure: Regenerate.
 421
 422 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 423
 424         * MAINTAINERS: Add bfin entry.
 425         * configure.tgt (bfin-*-*): Handle bfin targets.
 426         * configure: Regenerate.
 427
 428 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 429
 430         * .gitignore: Add /*/hw-config.h.
 431
 432 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 433
 434         * .gitignore: New file.
 435
 436 2010-07-28  DJ Delorie  <dj@redhat.com>
 437
 438         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 439
 440 2010-06-08  Nick Clifton  <nickc@redhat.com>
 441
 442         * reg.c (set_oszc): Use unsigned int for the mask.
 443         (set_szc, set_osz, set_sz): Likewise.
 444
 445 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 446
 447         * configure.ac: Target logic moved out to and included from ...
 448         * configure.tgt: ... this new file.
 449         * configure: Regenerated.
 450
 451 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 452
 453         * README-HACKING: Add more sections.
 454
 455 2010-02-11  Doug Evans  <dje@sebabeach.org>
 456
 457         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 458         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 459         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 460         * cris/semcrisv32f-switch.c: Regenerate.
 461
 462 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 463
 464         * avr/configure: Regenerate.
 465         * cris/configure: Regenerate.
 466         * microblaze/configure: Regenerate.
 467
 468 2010-01-02  Doug Evans  <dje@sebabeach.org>
 469
 470         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 471         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 472         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 473         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 474         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 475         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 476
 477 2010-01-01  Doug Evans  <dje@sebabeach.org>
 478
 479         * cris/mloop.in: Fix copyright year update snafu.
 480
 481 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 482
 483         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 484         * common/common.m4: Use AM_ZLIB to check for zlib support.
 485         * ppc/configure.ac: Likewise.
 486         * arm/configure, avr/configure, common/configure, cr16/configure,
 487         cris/configure, d10v/configure, erc32/configure, frv/configure,
 488         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 489         m32r/configure, m68hc11/configure, mcore/configure,
 490         microblaze/configure, mips/configure, mn10300/configure,
 491         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 492         v850/configure: Regenerate.
 493
 494 2009-11-24  DJ Delorie  <dj@redhat.com>
 495
 496         * rx: New directory.
 497         * configure.ac: Add entry for Renesas RX.
 498         * configure: Regenerate.
 499
 500 2009-11-22  Doug Evans  <dje@sebabeach.org>
 501
 502         * cris/cpuall.h: Regenerate.
 503         * cris/cpuv10.h: Regenerate.
 504         * cris/cpuv32.h: Regenerate.
 505         * cris/decodev10.c: Regenerate.
 506         * cris/decodev10.h: Regenerate.
 507         * cris/decodev32.c: Regenerate.
 508         * cris/decodev32.h: Regenerate.
 509
 510 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 511
 512         * avr/interp.c (sim_write): Allow byte access.
 513         (sim_read): Ditto.
 514
 515 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 516
 517         * avr/interp.c (sim_load): Clear memory before loading.
 518
 519 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 520
 521         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 522
 523 2009-10-23  Doug Evans  <dje@sebabeach.org>
 524
 525         * cris/arch.c: Regenerate.
 526         * cris/arch.h: Regenerate.
 527         * cris/cpuall.h: Regenerate.
 528         * cris/cpuv10.c: Regenerate.
 529         * cris/cpuv10.h: Regenerate.
 530         * cris/cpuv32.c: Regenerate.
 531         * cris/cpuv32.h: Regenerate.
 532         * cris/cris-desc.c: Regenerate.
 533         * cris/cris-desc.h: Regenerate.
 534         * cris/cris-opc.h: Regenerate.
 535         * cris/decodev10.c: Regenerate.
 536         * cris/decodev10.h: Regenerate.
 537         * cris/decodev32.c: Regenerate.
 538         * cris/decodev32.h: Regenerate.
 539         * cris/modelv10.c: Regenerate.
 540         * cris/modelv32.c: Regenerate.
 541         * cris/semcrisv10f-switch.c: Regenerate.
 542         * cris/semcrisv32f-switch.c: Regenerate.
 543
 544 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 545
 546         * avr/interp.c (sim_stop): Return 1.
 547
 548 2009-10-16  Doug Evans  <dje@sebabeach.org>
 549
 550         * MAINTAINERS: Add myself as m32r maintainer.
 551
 552 2009-10-15  Michael Egaer  <eager@eagercon.com>
 553
 554         * MAINTAINERS: Add self as MicroBlaze maintainer.
 555
 556 2009-10-14  Ben Elliston  <bje@gnu.org>
 557
 558         * MAINTAINERS (common): Move myself to "past maintainers" section.
 559
 560 2009-10-06  Michael Eager  <eager@eagercon.com>
 561
 562         * microblaze/interp.c: Add include microblaze-dis.h.
 563
 564 2009-09-23  Michael Eager  <eager@eagercon.com>
 565
 566         * configure: Add microblaze-*.* (not regenerated).
 567         * configure.ac: Likewise.
 568         * microblaze/config.in: New.
 569         * microblaze/configure: Generate.
 570         * microblaze/configure.ac: New.
 571         * microblaze/interp.c: New.
 572         * microblaze/Makefile.in: New.
 573         * microblaze/microblaze.h: New.
 574         * microblaze/microblaze.isa: New.
 575         * microblaze/sim-main.h: New.
 576         * microblaze/sysdep.h: New.
 577
 578 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 579
 580         * avr/config.in: Regenerate.
 581         * avr/configure: Likewise.
 582         * configure: Likewise.
 583         * cris/config.in: Likewise.
 584         * cris/configure: Likewise.
 585
 586         * configure.ac: m4_include toplevel config/override.m4.
 587         * configure: Regenerate.
 588         * avr/configure: Regenerate.
 589         * cris/configure: Regenerate.
 590
 591 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 592
 593         * Makefile.in (datarootdir): New variable.
 594
 595 2009-05-18  Jon Beniston <jon@beniston.com>
 596
 597         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 598         * configure.ac: Add lm32 target.
 599         * lm32: New directory.
 600
 601 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 602
 603         * MAINTAINERS: Orphan ppc.
 604
 605 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 606
 607         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 608         m32c_signal_to_target.  Change signal return values from SIGILL,
 609         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 610         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 611
 612 2009-04-30  Anthony Green  <green@moxielogic.com>
 613
 614         * MAINTAINERS: Add myself for the moxie port.
 615         * moxie: New directory.
 616         * configure.ac: Add entry for moxie.
 617         * configure: Regenerate.
 618
 619 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 620
 621         * avr: New directory.
 622         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 623         * avr/config.in: New file, generated by autoheader.
 624         * avr/configure: New file generated by autoconf.
 625         * configure.ac: Add avr.
 626         * configure: Regenerated.
 627
 628 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 629
 630         * Makefile.in: Add dummy install-pdf, html, and
 631         install-html targets.
 632
 633 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 634
 635         * cris/sim-if.c: Include errno.h.
 636         (cris_start_address, cris_program_offset): New variables.
 637         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 638         enums.
 639         (cris_options): New options --cris-program-offset and
 640         --cris-start-address.
 641         (cris_option_handler): Handle new options.
 642         (cris_program_offset_write, cris_set_section_offset_iterator)
 643         (cris_offset_sections, cris_offset_sections): New functions.
 644         (sim_load): Use cris_program_offset_write as function argument to
 645         cris_load_elf_file, not sim_write.
 646         (struct offsetinfo): New struct.
 647         (cris_handle_interpreter): Fix typo in comment.
 648         (sim_open): Call cris_offset_sections as soon as the bfd of the
 649         infile is available.  Gate bfd validity checks on abfd non-NULL.
 650         (sim_create_inferior): Let cris_start_address when != -1 override
 651         other start-address choices.
 652
 653 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 654
 655         * cris/traps.c (abort): Define to call sim_io_error.
 656         (create_map): Make -1 imply a non-fixed address, not 0.  All
 657         callers changed.  Only prefer the next higher unmapped address if
 658         the last mapped address is no less than 0x40000000.  Check that
 659         the address to be mapped is not already mapped.  Update head
 660         comment.
 661         (unmap_pages): Don't call abort when recursive call fails, just
 662         note and return an error if a page in the range couldn't be unmapped.
 663         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 664         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 665         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 666         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 667         don't abort on page not being mapped.  Handle non-anon filemap
 668         with length padded to pagesize.
 669
 670 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 671
 672         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 673         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 674         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 675         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 676         (TARGET_AT_CLKTCK): Remove redundant macros.
 677         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 678         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 679         callers.
 680         (sim_open): Also pass AT_SECURE.
 681
 682         * cris/sim-main.h (struct _sim_cpu): New member
 683         set_target_thread_data.
 684         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 685         * cris/crisv10f.c: Ditto.
 686         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 687         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 688         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 689         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 690         case.
 691
 692         * cris/traps.c (TARGET_SYS_exit_group): Define.
 693         (cris_break_13_handler): Handle it like the exit for the last
 694         thread.
 695
 696         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 697         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 698         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 699         2.6.27.  Set machine field to the BFD printable name of the
 700         machine.
 701
 702         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 703         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 704         TARGET_MAP_DENYWRITE.
 705
 706         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 707         (TARGET_X_OK, TARGET_F_OK): Define.
 708         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 709
 710         * cris/semcrisv32f-switch.c: Regenerate.
 711
 712 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 713
 714         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 715         just a short CRIS-specific notice.  Tweak the wording for a
 716         failing architecture test.
 717
 718         * cris/traps.c (TARGET_SYS_writev): New macro.
 719         (is_mapped_only, cris_dump_map): New functions.
 720         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 721         and prot combinations and a non-zero page-offset.  If
 722         TARGET_MAP_FIXED, unmap pages before mapping them.
 723         <case TARGET_SYS_mprotect>: When checking, allow any length
 724         argument.  Don't actually do anything.
 725         <case TARGET_SYS_writev>: New case.
 726
 727         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 728         * cris/sim-if.c: Include elf-bfd.h.
 729         (struct progbounds): New members end_loadmem, start_nonloadmem.
 730         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 731         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 732         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 733         static.  Update head comment.  Set new struct progbounds members.
 734         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 735         variables.
 736         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 737         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 738         functions.
 739         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 740         handling to use auxv_entries.  Improve error message and checking
 741         for invalid programs.  Use new variable abfd for the program
 742         instead of for each access reaching into sd to get it.
 743         (sim_create_inferior): If non-zero, use interp_start_addr instead
 744         of the program start address.
 745         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 746         stale comment.  Always specify little-endian.
 747
 748 2008-07-29  Nick Clifton  <nickc@redhat.com>
 749
 750         * common/genmloop.sh: Add new parameter: -shell to specify the
 751         command interpreter to use to run the input file.  This is
 752         necessary because otherwise SHELL is taken from the user's
 753         environment, and not from the makefile that invoked this script
 754         and the user might not be running an sh-like shell.
 755         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 756         * fr30/Makefile.in: Likewise.
 757         * frv/Makefile.in: Likewise.
 758         * i960/Makefile.in: Likewise.
 759         * iq2000/Makefile.in: Likewise.
 760         * m32r/Makefile.in: Likewise.
 761
 762         * frv/mloop.in: Add missing start of line comment marker.
 763
 764 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 765
 766         * cris/configure: Regenerate to track ../common/common.m4 changes.
 767         * cris/config.in: Ditto.
 768
 769 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 770             Daniel Jacobowitz  <dan@codesourcery.com>
 771             Joseph Myers  <joseph@codesourcery.com>
 772
 773         * cris/configure: Regenerate.
 774
 775 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 776
 777         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 778
 779 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 780
 781         * MAINTAINERS: Add myself as maintainer of cr16 port.
 782
 783 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 784
 785         Add simulator for National cr16 processor.
 786         * cr16: New directory.
 787         * configure.ac: Add entry for National cr16.
 788         * configure: Regenerate.
 789
 790 2008-02-05  DJ Delorie  <dj@redhat.com>
 791
 792         * configure.ac (v850): V850 now has a testsuite.
 793         * configure (v850): Likewise.
 794
 795 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 796
 797         Updated copyright notices for most files.
 798
 799 2007-12-19  DJ Delorie  <dj@redhat.com>
 800
 801         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 802         cut_point.
 803
 804 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 805
 806         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 807         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 808         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 809         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 810         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 811         cris/semcrisv32f-switch.c: Regenerate.
 812
 813 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 814
 815         Switch the license of all files explicitly copyright the FSF
 816         to GPLv3.
 817
 818 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 819
 820         * Makefile.in: Add dummy "pdf" target.
 821
 822 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 823
 824         * cris/traps.c (dump_statistics): Change format for cycle numbers
 825         to %llu and cast parameters to unsigned long long.
 826
 827 2007-02-16  Thiemo Seufer  <ths@mips.com>
 828
 829         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 830
 831 2007-01-28  Manuel Lauss  <slauss@resi.at>
 832
 833         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 834         (sh-*-*): Change to sh*-*-*.
 835         * configure: Regenerated.
 836
 837 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 838
 839         Updated copyright notices for most files.
 840
 841 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 842
 843         * Makefile.in (autoconf-common autoheader-common): Only run
 844         autoheader on subdirs with a file config.in.
 845
 846         * configure.ac (common): Make the default "yes" for all targets
 847         with sim subdirs.
 848         * configure: Regenerate.
 849
 850         * Makefile.in (autoconf-common autoheader-common): In documented
 851         usage, say SHELL=/bin/sh.
 852         (.PHONY): Add autoheader-common.
 853
 854         * MAINTAINERS: Add self as authorized committer for *.
 855
 856 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 857             Hans-Peter Nilsson  <hp@axis.com>
 858
 859         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 860         (cris_unknown_syscall_action): Declare.
 861         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 862         (cris_options): Add cris-unknown-syscall option.
 863         (cris_option_handler): Correct comment about and error message for
 864         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 865         * cris/traps.c: Include stdarg.h
 866         (cris_unknown_syscall): New function.
 867         (cris_break_13_handler): Instead of sim_io_eprintf and
 868         sim_engine_halt, call cris_unknown_syscall to handle more or less
 869         unknown syscalls.  Adjust code as necessary to handle return
 870         value.
 871
 872 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 873
 874         * MAINTAINERS: Add Dave Brolley for sh64.
 875
 876 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 877
 878         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 879         (cris_pipe_empty): Correct initialization of "remaining".  Only
 880         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 881         are written.
 882
 883 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 884
 885         * cris/configure.ac: Check for limits.h and sys/param.h.
 886         * cris/configure, cris/config.in: Rebuild.
 887         * cris/traps.c (SIM_PATHMAX): New macro.
 888         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 889
 890 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 891
 892         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 893         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 894         * configure: Regenerated.
 895
 896 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 897
 898         * cris/configure: Regenerated.
 899
 900 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 901
 902         * cris/configure: Regenerated.
 903
 904 2006-05-05  Andreas Schwab  <schwab@suse.de>
 905
 906         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 907         * configure: Regenerate.
 908
 909         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 910         (CC_FOR_BUILD): Don't override.
 911         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 912
 913 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 914
 915         * MAINTAINERS: Add an "Authorized committers" section, and list
 916         DJ Delorie for v850.
 917
 918 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 919
 920         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 921
 922 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 923
 924         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 925         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 926         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 927         (all): Depend on rvdummy$(EXEEXT).
 928         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 929         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 930         default off.
 931         * cris/configure: Regenerate.
 932         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 933         (enum cris_interrupt_type, crisv10deliver_interrupt)
 934         (crisv32deliver_interrupt: New declarations.
 935         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 936         sim_events_tickn and set state-events member work_pending when it's
 937         time for the next event.
 938         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 939         interrupt-delivery function.
 940         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 941         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 942         * cris/devices.c: Include hw-device.h.
 943         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 944         (device_io_write_buffer): Only perform 0x900000xx-functions if
 945         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 946         call hw_io_write_buffer.  Add return 0 last in function.
 947         * cris/sim-if.c (cris_have_900000xxif): Now global.
 948         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 949         Force "-model" option, effectively.
 950         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 951         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 952
 953 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 954
 955         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 956         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 957         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 958
 959 2006-03-13  DJ Delorie  <dj@redhat.com>
 960
 961         * MAINTAINERS: Add self as m32c sim maintainer.
 962
 963 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 964
 965         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 966         mapping.
 967         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 968
 969 2006-01-23  Jim Blandy  <jimb@redhat.com>
 970
 971         Add simulator for Renesas M32C and M16C.
 972
 973         * m32c: New directory.
 974         * configure.ac: Add entry for Renesas M32C.
 975         * configure: Regenerate.
 976
 977 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 978
 979         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 980         cycle count for the current insn.
 981
 982 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 983
 984         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 985         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 986         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 987         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 988
 989 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 990
 991         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 992         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 993         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 994         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 995         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 996         cris/semcrisv32f-switch.c: Regenerate.
 997
 998 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 999
1000         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1001         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1002         TARGET_O_WRONLY.
1003         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1004         F_GETFL on fd 0, 1 and 2.
1005
1006 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1007
1008         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1009         last_open_fd, last_open_flags.
1010         * cris/traps.c: Don't include targ-vals.h.
1011         (TARGET_O_ACCMODE): Define.
1012         (cris_break_13_handler): Set new _sim_cpu members.
1013         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1014         Rearrange code as switch.  Emit "unimplemented" abort for
1015         unimplemented fcntl calls.
1016
1017         * cris/traps.c (TARGET_SYS_stat): Define.
1018         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1019         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1020
1021 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1022
1023         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1024         low 32 bits are used after an unsigned long cast.
1025
1026 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1027
1028         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1029
1030 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1031
1032         * MAINTAINERS: Update my mail address, move myself to the
1033         "Past maintainers" section.
1034
1035 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1036
1037         * configure.ac: Add igen to v850 build.
1038         * configure: Regenerate.
1039
1040 2005-04-29  Paul Brook  <paul@codesourcery.com>
1041
1042         * common/callback.c (PIPE_BUF): Provide default definition.
1043         (os_lstat): Use stat if lstat is not available on the host.
1044         (os_ftruncate): Return EINVAL if not available on the host.
1045         (os_truncate): Ditto.
1046         * common/configure.ac: Check for lstat, truncate and ftruncate.
1047         * common/configure: Regenerate.
1048         * common/config.in: Regenerate.
1049
1050 2005-04-27  Paul Brook  <paul@codesourcery.com>
1051
1052         * common/Make-common.in: Add $(EXEEXT) to "run".
1053
1054 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1055
1056         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1057         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1058         implemented.  In call to create_map, pad length argument to 8k.
1059
1060 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1061
1062         * configure.ac: Add explicit sh64 case.
1063         * configure: Regenerate.
1064
1065 2005-03-30  Paul Brook  <paul@codesourcery.com>
1066
1067         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1068
1069 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1070
1071         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1072         include cgen-ops.h in decodev10.c and decodev32.c.
1073         * cris/sim-main.h: Don't include cgen-ops.h here.
1074         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1075         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1076         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1077         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1078         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1079         cris/semcrisv32f-switch.c: Regenerate.
1080
1081         * cris/traps.c (cris_break_13_handler) <case
1082         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1083         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1084
1085 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1086
1087         * cris/configure: Regenerate.
1088
1089 2005-02-28  Jim Blandy  <jimb@redhat.com>
1090
1091         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1092         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1093         Regenerated, after change to common/aclocal.m4.
1094
1095 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1096
1097         * iq2000: New target subdirectory.
1098         * configure.ac: Add iq2000 target.
1099         * configure: Regenerate.
1100
1101 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1102
1103         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1104         (realclean, install): Fail if subdir make failed.
1105
1106 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1107
1108         * cris: New directory, simulator for Axis Communications CRIS
1109         including CRIS v32, CGEN-based.
1110         * configure.ac: Add corresponding configury.
1111         * configure: Regenerate.
1112
1113 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1114
1115         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1116         common directory.  Remove sparc*-*-* from list.
1117
1118 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1119
1120         * Makefile.in (autoconf-common autoheader-common): Add --force to
1121         autoconf and autoheader.
1122         (autoconf-common autoheader-common)
1123         (autoconf-install autoheader-install): Check for configure.ac, not
1124         configure.in.
1125         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1126         * configure: Re-generate.
1127
1128 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1129
1130         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1131         correctly calls AC_CONFIG_SUBDIRS.
1132         * configure: Re-generate.
1133
1134 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1135
1136         * i960, h8500: Delete directory.
1137
1138 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1139
1140         * d30v, fr30, mn10200, z8k: Delete directory.
1141
1142 2004-03-10  Ben Elliston  <bje@gnu.org>
1143
1144         * MAINTAINERS: Update my mail address.
1145
1146 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1147
1148         * configure.in (mips*-*-*): Configure in testsuite.
1149         * configure: Regenerate.
1150
1151 2003-10-08  Dave Brolley  <brolley@redhat.com>
1152
1153         * configure.in: Move frv handling to alphabetically correct placement.
1154
1155 2003-09-03  Andreas Schwab  <schwab@suse.de>
1156
1157         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1158
1159 2003-08-29  Dave Brolley  <brolley@redhat.com>
1160
1161         * MAINTAINERS: Add myself as maintainer of the FRV port.
1162
1163 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1164             Dave Brolley  <brolley@redhat.com>
1165
1166         * frv/: New directory, simulator for the Fujitsu FRV.
1167         * configure.in: Add frv configury.
1168         * configure: Regenerate.
1169
1170 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1171
1172         * MAINTAINERS: Update my mail address.
1173
1174 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1175
1176         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1177         maintenance.  List igen and sh maintainers.  Mention that target
1178         and global maintainers pick up the slack.
1179
1180 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1181
1182         * configure.in: Add testsuite to extra_subdirs for sh.
1183         * configure: Regenerate.
1184
1185 2003-01-23  Nick Clifton  <nickc@redhat.com>
1186
1187         * Add sh2e support:
1188
1189 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1190
1191         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1192
1193 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1194
1195         * MAINTAINERS: Update my email address.
1196
1197 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1198
1199         * w65/: Delete directory.
1200
1201 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1202
1203         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1204         * configure: Re-generate.
1205
1206 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1207
1208         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1209         * configure: Re-generate.
1210
1211 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1212
1213         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1214         id, date and host to be overriden by NAME, ID, DATE and HOST
1215         respectfully.  Use ISO dates.
1216
1217 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1218
1219         * Makefile.in (ChangeLog): New makefile variable.
1220         * README-HACKING: Mention the ChangeLog makefile variable.
1221
1222 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1223
1224         * tic80/: Delete directory.
1225
1226 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1227
1228         * MAINTAINERS: Update my email address.
1229
1230 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1231
1232         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1233
1234 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1235
1236         * MAINTAINERS: Record self as a co-maintainer of just common/.
1237
1238 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1239
1240         * MAINTAINERS: Point to GDB files describing overall maintaince
1241         and check-in procedures.
1242
1243 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1244
1245         * MAINTAINERS: Add myself for ARM portions.
1246
1247 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1248
1249         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1250         * configure: Re-generate.
1251
1252 2001-02-16  Ben Elliston  <bje@redhat.com>
1253
1254         * MAINTAINERS: Add myself for common portions.
1255
1256 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1257
1258         * MAINTAINERS: Added self and Andrew for the mips sim.
1259
1260 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1261
1262         * MAINTAINERS: Added self and Andrew for the ppc sim.
1263
1264 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1265
1266         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1267         * m68hc11: New directory.
1268         * configure.in: Add.
1269         * configure: Regenerate.
1270
1271 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1272
1273         * tic80: New directory.
1274         * configure.in: Add configury.
1275         * configure: Regenerate.
1276
1277 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1278
1279         * configure.in (extra_subdirs): Add testsuite to strongarm
1280         directories.
1281         * configure: Regenerate.
1282
1283 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1284
1285         * MAINTAINERS: New file.  Blank.
1286
1287 1999-11-18  Ben Elliston  <bje@cygnus.com>
1288
1289         * configure.in: Require autoconf 2.13 and remove obsolete
1290         invocation of AC_C_CROSS.
1291         * configure: Regenerate.
1292
1293 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1294
1295         * configure.in: Configure the testsuite directory for thumb.
1296         * configure: Regenerate.
1297
1298 1999-07-16  Ben Elliston  <bje@cygnus.com>
1299
1300         * configure.in: Configure the testsuite directory for arm.
1301         * configure: Regenerate.
1302
1303 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1304
1305         * configure.in: Add support for MCore target.
1306         * configure: Regenerate.
1307
1308 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1309
1310         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1311         RUNTEST instead of commenting out, fixes portability problem.
1312
1313 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1314
1315         * configure.in: Add support for StrongARM target.
1316         * configure: Regenerate.
1317
1318 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1319
1320         * configure.in: Require autoconf 2.12.1 or higher.
1321
1322 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1323
1324         * configure.in (i960-*-*): Add.
1325         * configure: Rebuild.
1326
1327 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1328
1329         * configure.in: Added case for fr30-*-*.
1330         * configure: Regenerated.
1331
1332 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1333
1334         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1335         to allow successful operation on Windows.
1336
1337 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1338
1339         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1340         check can be invoked recursively.
1341
1342 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1343
1344         * configure.in: Build simulator on sparclite and sparc86x targets.
1345         * configure: Regenerate.
1346
1347 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1348
1349         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1350         to autoconf and autoheader.
1351
1352 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1353
1354         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1355         ../common' to autoconf and autoheader.  Unconditionally run
1356         autoconf in every subdir.
1357         (autoconf-changelog autoheader-changelog): Unconditionally run
1358         commands in every subdir.
1359         (autoconf-install autoheader-install): Likewise.
1360
1361 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1362
1363         * Makefile.in:  Get SHELL from configure.
1364         * (FLAGS_TO_PASS):  Pass down SHELL.
1365         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1366         NT native builds.
1367
1368 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1369
1370         * configure.in (extra_subdirs): Enable igen for mn10300.
1371         * configure: Re-generate.
1372
1373 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1374
1375         * configure.in (extra_subdirs): Add support for thumb target.
1376
1377         * configure (extra_subdirs): Add support for thumb target.
1378
1379 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1380
1381         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1382         target.
1383         * configure: Regenerate.
1384
1385 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1386
1387         * configure.in (extra_subdirs): v850ea needs igen.
1388         * configure: Re-generate.
1389
1390 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1391
1392         * configure.in (testdir): When a testsuite directory, add that to
1393         the list of confdirs.
1394
1395 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1396
1397         * configure.in (extra_subdirs): Enable igen ready for V850.
1398
1399 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1400
1401         * configure.in (w65-*-*, only_if_enabled): Set.
1402         * configure: Re-generate.
1403
1404 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1405
1406         * configure.in (sparc*-*-*, only_if_enabled): Set
1407         only_if_enabled=yes.  Check only_if_enabled before enabling a
1408         simulator.
1409         * configure: Regenerate.
1410
1411 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1412
1413         * configure.in (extra_subdirs): Add v850e target.
1414
1415 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1416
1417         * configure.in (extra_subdirs): Add v850ea target.
1418
1419 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1420
1421         * configure.in (sparc*-*-*): Don't build erc32.
1422         * configure: Regenerate.
1423
1424 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1425
1426         * configure.in (m32r-*-*): New target.
1427         * configure: Regenerate.
1428
1429         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1430
1431 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1432
1433         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1434         thought that .NOEXPORT was the default target.
1435
1436 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1437
1438         * Makefile.in (clean mostlyclean): Restore targets accidentally
1439         deleted in earlier change.
1440
1441 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1442
1443         * Makefile.in (autoheader-common, autoheader-changelog,
1444         autoheader-install): Perform autoheader in addition to autoconf.
1445
1446 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1447
1448         * Makefile.in (autoconf-install): New target.
1449         (autoconf-changelog): Try different way to obtain user name.
1450
1451 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1452
1453         * Makefile.in (autoconf-changelog): New target, update
1454         ChangeLog for all subdirectories - normally used after
1455         autoconf-common target.
1456
1457 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1458
1459         * configure.in (extra_subdirs): Include testsuite for d30v.
1460         * configure: Regenerate.
1461
1462         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1463         ../gdb/Makefile.in
1464         (check): New rules - drive the testsuite.
1465
1466 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1467
1468         * configure.in: Add mn10200 configure lines accidentally
1469         removed.
1470         * configure: Regenerated.
1471
1472 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1473
1474         * configure.in (extra_subdirs): Generalize common sub directory
1475         into a list.
1476         (extra_subdirs): For d30v add igen to the list to be built.
1477
1478 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1479
1480         * configure.in (d30v): New target.
1481         * configure: Regenerated.
1482
1483 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1484
1485         * configure.in: Don't require GCC to build the mn10200
1486         simulator anymore.
1487         * configure: Rebuilt.
1488
1489 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1490
1491         * configure.in: Don't configure any subdirs if no simulator
1492         is being built.  Don't use erc32 for sparc64.
1493         * configure: Regenerated.
1494
1495 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1496
1497         * Makefile.in (autoconf-common): New target.
1498         * configure.in: Do configure common.
1499         * configure: Regenerated.
1500
1501 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1502
1503         * configure configure.in:  Don't configure common anymore.  Files
1504         from common are now built in the individual simualtor directories.
1505         This fixes problems with the WinGDB build procedure.
1506
1507 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1508
1509         * configure: Enable the mn10200 simulator.
1510
1511 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1512
1513         * configure.in (configdirs): Add common.
1514         * configure: Regenerated.
1515
1516 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1517
1518         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1519         system V based targets.
1520         * configure: Regenerate.
1521
1522 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1523
1524         * configure.in (--enable-sim-powerpc): Delete.
1525         (--enable-sim): Add.
1526         * configure: Regenerated.
1527
1528 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1529
1530         * configure.in: Only build the V850 simulator if
1531         we are using gcc.
1532         * configure: Rebuild.
1533
1534 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1535
1536         * configure.in: Do build erc32 for DOS and Windows hosts.
1537         * configure: Rebuild.
1538
1539 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1540
1541         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1542         be inherited from the parent.  Remove INSTALL_XFORM and
1543         INSTALL_XFORM1.  Make INSTALL be set from configure.
1544
1545 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1546
1547         * configure.in: Only build the MIPS simulator if we are using
1548         gcc.
1549         * configure: Rebuild.
1550
1551 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1552
1553         * configure.in (v850-*-*): Added V850 simulator.
1554
1555 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1556
1557         * configure.in (d10v-*-*): Added D10V simulator.
1558
1559 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1560
1561         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1562         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1563         (docdir): Removed.
1564         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1565         (AC_PROG_INSTALL): Added.
1566         * configure: Rebuilt.
1567
1568 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1569
1570         * configure.in: Only configure erc32 if using gcc.
1571         * configure: Rebuild.
1572
1573 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1574
1575         * configure.in (sim_target): Build PowerPC simulator for powerpc
1576         System V.4, Solaris, and Elf targets.
1577         * configure: Regenerate with autoconf 2.10.
1578
1579 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1580
1581         * configure.in: Only built erc32 simulator on Unix hosts as it
1582         uses pseudo ttys.
1583         * configure: Regenerated with autoconf 2.8.
1584
1585 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1586
1587         * erc32: Sparc simulator from the ESA.
1588
1589 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1590
1591         From: Miles Bader  <miles@gnu.ai.mit.edu>
1592         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1593         * configure: Regenerate using autoconf.
1594
1595 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1596
1597         * Makefile.in (install): Fix typo.
1598
1599 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1600
1601         * configure: Regenerate with autoconf 2.7.
1602
1603         * Makefile.in (all): Simplify.
1604         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1605         as in the all target.
1606         (distclean, maintainer-clean, realclean): Likewise.
1607         (install): Likewise.
1608
1609 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1610
1611         * Makefile.in (all): Remove extra '\' char from shell script.
1612
1613 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1614
1615         * Makefile.in (all): Avoid a for loop with zero elements, even if
1616         the loop will not be executed because of an if statement.
1617
1618 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1619
1620         * Makefile.in (install): Add missing semicolon in "fi \".
1621
1622 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1623
1624         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1625         defaults from configure.
1626
1627         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1628         configure defaults.
1629         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1630         if either --enable-sim-powerpc is used, or the host compiler is
1631         GCC.
1632
1633 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1634
1635         * configure.in (mips*-*-*): Added "mips" simulator target.
1636         * configure: Re-generated.
1637
1638 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1639
1640         * Makefile.in (BISON): Remove macro.
1641         (FLAGS_TO_PASS): Remove BISON.
1642
1643 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1644
1645         * configure.in:  Explicitly `exit 0' for broken shells.
1646         * configure:  Rebuilt.
1647
1648 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1649
1650         * common/run.c (main): Initialize the callbacks.
1651
1652 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1653
1654         * Makefile.in (maintainer-clean): New synonym for realclean.
1655
1656 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1657
1658         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1659         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1660
1661 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1662
1663         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1664         <cagney@highland.com.au>.
1665         * configure: Regnerate from configure.in.
1666
1667 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1668
1669         * Update all FSF addresses except those in COPYING* files.
1670
1671 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1672
1673         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1674         submakes either default or passed in value.
1675
1676 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1677
1678         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1679           install): Changed targets so that they descend all
1680           subdirectories in $(SUBDIRS).
1681           (*-all, *-clean, *-install): Removed targets.
1682
1683         * configure.in: Don't bother with target makefile fragments, they
1684           are no longer needed.
1685         * configure: regenerated.
1686
1687         * Makefile.in, configure.in: converted to autoconf.
1688         * configure: New file, generated with autconf 2.4.
1689
1690 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1691
1692         * Makefile.in: Support ARM.
1693         * configure.in: Ditto.
1694
1695 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1696
1697         * Makefile.in: Support W65.
1698         * configure.in: Ditto.
1699
1700 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1701
1702         * Makefile.in: Add TAGS target.
1703
1704 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1705
1706         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1707           install-h8300, clean-h8300, all-h8500, install-h8500,
1708           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1709           recursion lines.
1710
1711 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1712
1713         * Makefile.in: remove endian.h trace from h8500
1714
1715 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1716
1717         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1718
1719 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1720
1721         * Makefile.in: make all of the all-* target (except all-nothing)
1722         depend on endian.h, so that if we're not building a simulator, we
1723         don't built endian
1724
1725 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1726
1727         * Makefile.in (check, installcheck): Added dummy targets.
1728
1729 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1730
1731         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1732         explicitly make it, since some makes apparently don't work with
1733         VPATH and .c to executable rules (SunOS make for example).
1734
1735 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1736
1737         * Makefile.in (endian): Add explicit rule for broken makes.
1738
1739 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1740
1741         * Makefile.in (info, install-info): New targets.
1742         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1743         level Makefile.
1744
1745 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1746
1747         * Makefile.in (endian.h): build endian.h via a temporary file so
1748           that we don't leave an incomplete file lying around on
1749           interrupted builds.
1750           (clean): remove endian, e.h, and endian.h.
1751
1752 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1753
1754         * Makefile.in, configure.in: if target isn't supported, build a
1755         harmless makefile.
1756
1757