sim/ChangeLog

   1 2009-11-09  Tristan Gingold  <gingold@adacore.com>
   2
   3         * avr/interp.c (sim_resume): Fix typo for OP_ret.
   4
   5 2009-10-23  Doug Evans  <dje@sebabeach.org>
   6
   7         * cris/arch.c: Regenerate.
   8         * cris/arch.h: Regenerate.
   9         * cris/cpuall.h: Regenerate.
  10         * cris/cpuv10.c: Regenerate.
  11         * cris/cpuv10.h: Regenerate.
  12         * cris/cpuv32.c: Regenerate.
  13         * cris/cpuv32.h: Regenerate.
  14         * cris/cris-desc.c: Regenerate.
  15         * cris/cris-desc.h: Regenerate.
  16         * cris/cris-opc.h: Regenerate.
  17         * cris/decodev10.c: Regenerate.
  18         * cris/decodev10.h: Regenerate.
  19         * cris/decodev32.c: Regenerate.
  20         * cris/decodev32.h: Regenerate.
  21         * cris/modelv10.c: Regenerate.
  22         * cris/modelv32.c: Regenerate.
  23         * cris/semcrisv10f-switch.c: Regenerate.
  24         * cris/semcrisv32f-switch.c: Regenerate.
  25
  26 2009-10-22  Tristan Gingold  <gingold@adacore.com>
  27
  28         * avr/interp.c (sim_stop): Return 1.
  29
  30 2009-10-16  Doug Evans  <dje@sebabeach.org>
  31
  32         * MAINTAINERS: Add myself as m32r maintainer.
  33
  34 2009-10-15  Michael Egaer  <eager@eagercon.com>
  35
  36         * MAINTAINERS: Add self as MicroBlaze maintainer.
  37
  38 2009-10-14  Ben Elliston  <bje@gnu.org>
  39
  40         * MAINTAINERS (common): Move myself to "past maintainers" section.
  41
  42 2009-10-06  Michael Eager  <eager@eagercon.com>
  43
  44         * microblaze/interp.c: Add include microblaze-dis.h.
  45
  46 2009-09-23  Michael Eager  <eager@eagercon.com>
  47
  48         * configure: Add microblaze-*.* (not regenerated).
  49         * configure.ac: Likewise.
  50         * microblaze/config.in: New.
  51         * microblaze/configure: Generate.
  52         * microblaze/configure.ac: New.
  53         * microblaze/interp.c: New.
  54         * microblaze/Makefile.in: New.
  55         * microblaze/microblaze.h: New.
  56         * microblaze/microblaze.isa: New.
  57         * microblaze/sim-main.h: New.
  58         * microblaze/sysdep.h: New.
  59
  60 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  61
  62         * avr/config.in: Regenerate.
  63         * avr/configure: Likewise.
  64         * configure: Likewise.
  65         * cris/config.in: Likewise.
  66         * cris/configure: Likewise.
  67
  68         * configure.ac: m4_include toplevel config/override.m4.
  69         * configure: Regenerate.
  70         * avr/configure: Regenerate.
  71         * cris/configure: Regenerate.
  72
  73 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  74
  75         * Makefile.in (datarootdir): New variable.
  76
  77 2009-05-18  Jon Beniston <jon@beniston.com>
  78
  79         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
  80         * configure.ac: Add lm32 target.
  81         * lm32: New directory.
  82
  83 2009-05-11  Andrew Cagney  <cagney@gnu.org>
  84
  85         * MAINTAINERS: Orphan ppc.
  86
  87 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
  88
  89         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
  90         m32c_signal_to_target.  Change signal return values from SIGILL,
  91         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
  92         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
  93
  94 2009-04-30  Anthony Green  <green@moxielogic.com>
  95
  96         * MAINTAINERS: Add myself for the moxie port.
  97         * moxie: New directory.
  98         * configure.ac: Add entry for moxie.
  99         * configure: Regenerate.
 100
 101 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 102
 103         * avr: New directory.
 104         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 105         * avr/config.in: New file, generated by autoheader.
 106         * avr/configure: New file generated by autoconf.
 107         * configure.ac: Add avr.
 108         * configure: Regenerated.
 109
 110 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 111
 112         * Makefile.in: Add dummy install-pdf, html, and
 113         install-html targets.
 114
 115 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 116
 117         * cris/sim-if.c: Include errno.h.
 118         (cris_start_address, cris_program_offset): New variables.
 119         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 120         enums.
 121         (cris_options): New options --cris-program-offset and
 122         --cris-start-address.
 123         (cris_option_handler): Handle new options.
 124         (cris_program_offset_write, cris_set_section_offset_iterator)
 125         (cris_offset_sections, cris_offset_sections): New functions.
 126         (sim_load): Use cris_program_offset_write as function argument to
 127         cris_load_elf_file, not sim_write.
 128         (struct offsetinfo): New struct.
 129         (cris_handle_interpreter): Fix typo in comment.
 130         (sim_open): Call cris_offset_sections as soon as the bfd of the
 131         infile is available.  Gate bfd validity checks on abfd non-NULL.
 132         (sim_create_inferior): Let cris_start_address when != -1 override
 133         other start-address choices.
 134
 135 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 136
 137         * cris/traps.c (abort): Define to call sim_io_error.
 138         (create_map): Make -1 imply a non-fixed address, not 0.  All
 139         callers changed.  Only prefer the next higher unmapped address if
 140         the last mapped address is no less than 0x40000000.  Check that
 141         the address to be mapped is not already mapped.  Update head
 142         comment.
 143         (unmap_pages): Don't call abort when recursive call fails, just
 144         note and return an error if a page in the range couldn't be unmapped.
 145         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 146         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 147         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 148         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 149         don't abort on page not being mapped.  Handle non-anon filemap
 150         with length padded to pagesize.
 151
 152 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 153
 154         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 155         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 156         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 157         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 158         (TARGET_AT_CLKTCK): Remove redundant macros.
 159         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 160         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 161         callers.
 162         (sim_open): Also pass AT_SECURE.
 163
 164         * cris/sim-main.h (struct _sim_cpu): New member
 165         set_target_thread_data.
 166         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 167         * cris/crisv10f.c: Ditto.
 168         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 169         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 170         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 171         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 172         case.
 173
 174         * cris/traps.c (TARGET_SYS_exit_group): Define.
 175         (cris_break_13_handler): Handle it like the exit for the last
 176         thread.
 177
 178         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 179         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 180         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 181         2.6.27.  Set machine field to the BFD printable name of the
 182         machine.
 183
 184         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 185         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 186         TARGET_MAP_DENYWRITE.
 187
 188         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 189         (TARGET_X_OK, TARGET_F_OK): Define.
 190         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 191
 192         * cris/semcrisv32f-switch.c: Regenerate.
 193
 194 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 195
 196         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 197         just a short CRIS-specific notice.  Tweak the wording for a
 198         failing architecture test.
 199
 200         * cris/traps.c (TARGET_SYS_writev): New macro.
 201         (is_mapped_only, cris_dump_map): New functions.
 202         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 203         and prot combinations and a non-zero page-offset.  If
 204         TARGET_MAP_FIXED, unmap pages before mapping them.
 205         <case TARGET_SYS_mprotect>: When checking, allow any length
 206         argument.  Don't actually do anything.
 207         <case TARGET_SYS_writev>: New case.
 208
 209         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 210         * cris/sim-if.c: Include elf-bfd.h.
 211         (struct progbounds): New members end_loadmem, start_nonloadmem.
 212         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 213         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 214         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 215         static.  Update head comment.  Set new struct progbounds members.
 216         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 217         variables.
 218         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 219         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 220         functions.
 221         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 222         handling to use auxv_entries.  Improve error message and checking
 223         for invalid programs.  Use new variable abfd for the program
 224         instead of for each access reaching into sd to get it.
 225         (sim_create_inferior): If non-zero, use interp_start_addr instead
 226         of the program start address.
 227         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 228         stale comment.  Always specify little-endian.
 229
 230 2008-07-29  Nick Clifton  <nickc@redhat.com>
 231
 232         * common/genmloop.sh: Add new parameter: -shell to specify the
 233         command interpreter to use to run the input file.  This is
 234         necessary because otherwise SHELL is taken from the user's
 235         environment, and not from the makefile that invoked this script
 236         and the user might not be running an sh-like shell.
 237         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 238         * fr30/Makefile.in: Likewise.
 239         * frv/Makefile.in: Likewise.
 240         * i960/Makefile.in: Likewise.
 241         * iq2000/Makefile.in: Likewise.
 242         * m32r/Makefile.in: Likewise.
 243
 244         * frv/mloop.in: Add missing start of line comment marker.
 245
 246 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 247
 248         * cris/configure: Regenerate to track ../common/common.m4 changes.
 249         * cris/config.in: Ditto.
 250
 251 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 252             Daniel Jacobowitz  <dan@codesourcery.com>
 253             Joseph Myers  <joseph@codesourcery.com>
 254
 255         * cris/configure: Regenerate.
 256
 257 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 258
 259         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 260
 261 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 262
 263         * MAINTAINERS: Add myself as maintainer of cr16 port.
 264
 265 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 266
 267         Add simulator for National cr16 processor.
 268         * cr16: New directory.
 269         * configure.ac: Add entry for National cr16.
 270         * configure: Regenerate.
 271
 272 2008-02-05  DJ Delorie  <dj@redhat.com>
 273
 274         * configure.ac (v850): V850 now has a testsuite.
 275         * configure (v850): Likewise.
 276
 277 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 278
 279         Updated copyright notices for most files.
 280
 281 2007-12-19  DJ Delorie  <dj@redhat.com>
 282
 283         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 284         cut_point.
 285
 286 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 287
 288         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 289         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 290         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 291         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 292         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 293         cris/semcrisv32f-switch.c: Regenerate.
 294
 295 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 296
 297         Switch the license of all files explicitly copyright the FSF
 298         to GPLv3.
 299
 300 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 301
 302         * Makefile.in: Add dummy "pdf" target.
 303
 304 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 305
 306         * cris/traps.c (dump_statistics): Change format for cycle numbers
 307         to %llu and cast parameters to unsigned long long.
 308
 309 2007-02-16  Thiemo Seufer  <ths@mips.com>
 310
 311         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 312
 313 2007-01-28  Manuel Lauss  <slauss@resi.at>
 314
 315         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 316         (sh-*-*): Change to sh*-*-*.
 317         * configure: Regenerated.
 318
 319 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 320
 321         Updated copyright notices for most files.
 322
 323 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 324
 325         * Makefile.in (autoconf-common autoheader-common): Only run
 326         autoheader on subdirs with a file config.in.
 327
 328         * configure.ac (common): Make the default "yes" for all targets
 329         with sim subdirs.
 330         * configure: Regenerate.
 331
 332         * Makefile.in (autoconf-common autoheader-common): In documented
 333         usage, say SHELL=/bin/sh.
 334         (.PHONY): Add autoheader-common.
 335
 336         * MAINTAINERS: Add self as authorized committer for *.
 337
 338 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 339             Hans-Peter Nilsson  <hp@axis.com>
 340
 341         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 342         (cris_unknown_syscall_action): Declare.
 343         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 344         (cris_options): Add cris-unknown-syscall option.
 345         (cris_option_handler): Correct comment about and error message for
 346         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 347         * cris/traps.c: Include stdarg.h
 348         (cris_unknown_syscall): New function.
 349         (cris_break_13_handler): Instead of sim_io_eprintf and
 350         sim_engine_halt, call cris_unknown_syscall to handle more or less
 351         unknown syscalls.  Adjust code as necessary to handle return
 352         value.
 353
 354 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 355
 356         * MAINTAINERS: Add Dave Brolley for sh64.
 357
 358 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 359
 360         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 361         (cris_pipe_empty): Correct initialization of "remaining".  Only
 362         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 363         are written.
 364
 365 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 366
 367         * cris/configure.ac: Check for limits.h and sys/param.h.
 368         * cris/configure, cris/config.in: Rebuild.
 369         * cris/traps.c (SIM_PATHMAX): New macro.
 370         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 371
 372 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 373
 374         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 375         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 376         * configure: Regenerated.
 377
 378 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 379
 380         * cris/configure: Regenerated.
 381
 382 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 383
 384         * cris/configure: Regenerated.
 385
 386 2006-05-05  Andreas Schwab  <schwab@suse.de>
 387
 388         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 389         * configure: Regenerate.
 390
 391         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 392         (CC_FOR_BUILD): Don't override.
 393         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 394
 395 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 396
 397         * MAINTAINERS: Add an "Authorized committers" section, and list
 398         DJ Delorie for v850.
 399
 400 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 401
 402         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 403
 404 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 405
 406         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 407         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 408         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 409         (all): Depend on rvdummy$(EXEEXT).
 410         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 411         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 412         default off.
 413         * cris/configure: Regenerate.
 414         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 415         (enum cris_interrupt_type, crisv10deliver_interrupt)
 416         (crisv32deliver_interrupt: New declarations.
 417         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 418         sim_events_tickn and set state-events member work_pending when it's
 419         time for the next event.
 420         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 421         interrupt-delivery function.
 422         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 423         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 424         * cris/devices.c: Include hw-device.h.
 425         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 426         (device_io_write_buffer): Only perform 0x900000xx-functions if
 427         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 428         call hw_io_write_buffer.  Add return 0 last in function.
 429         * cris/sim-if.c (cris_have_900000xxif): Now global.
 430         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 431         Force "-model" option, effectively.
 432         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 433         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 434
 435 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 436
 437         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 438         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 439         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 440
 441 2006-03-13  DJ Delorie  <dj@redhat.com>
 442
 443         * MAINTAINERS: Add self as m32c sim maintainer.
 444
 445 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 446
 447         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 448         mapping.
 449         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 450
 451 2006-01-23  Jim Blandy  <jimb@redhat.com>
 452
 453         Add simulator for Renesas M32C and M16C.
 454
 455         * m32c: New directory.
 456         * configure.ac: Add entry for Renesas M32C.
 457         * configure: Regenerate.
 458
 459 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 460
 461         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 462         cycle count for the current insn.
 463
 464 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 465
 466         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 467         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 468         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 469         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 470
 471 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 472
 473         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 474         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 475         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 476         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 477         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 478         cris/semcrisv32f-switch.c: Regenerate.
 479
 480 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 481
 482         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 483         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 484         TARGET_O_WRONLY.
 485         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 486         F_GETFL on fd 0, 1 and 2.
 487
 488 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 489
 490         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 491         last_open_fd, last_open_flags.
 492         * cris/traps.c: Don't include targ-vals.h.
 493         (TARGET_O_ACCMODE): Define.
 494         (cris_break_13_handler): Set new _sim_cpu members.
 495         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 496         Rearrange code as switch.  Emit "unimplemented" abort for
 497         unimplemented fcntl calls.
 498
 499         * cris/traps.c (TARGET_SYS_stat): Define.
 500         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 501         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 502
 503 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 504
 505         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 506         low 32 bits are used after an unsigned long cast.
 507
 508 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 509
 510         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 511
 512 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 513
 514         * MAINTAINERS: Update my mail address, move myself to the
 515         "Past maintainers" section.
 516
 517 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 518
 519         * configure.ac: Add igen to v850 build.
 520         * configure: Regenerate.
 521
 522 2005-04-29  Paul Brook  <paul@codesourcery.com>
 523
 524         * common/callback.c (PIPE_BUF): Provide default definition.
 525         (os_lstat): Use stat if lstat is not available on the host.
 526         (os_ftruncate): Return EINVAL if not available on the host.
 527         (os_truncate): Ditto.
 528         * common/configure.ac: Check for lstat, truncate and ftruncate.
 529         * common/configure: Regenerate.
 530         * common/config.in: Regenerate.
 531
 532 2005-04-27  Paul Brook  <paul@codesourcery.com>
 533
 534         * common/Make-common.in: Add $(EXEEXT) to "run".
 535
 536 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 537
 538         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 539         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 540         implemented.  In call to create_map, pad length argument to 8k.
 541
 542 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 543
 544         * configure.ac: Add explicit sh64 case.
 545         * configure: Regenerate.
 546
 547 2005-03-30  Paul Brook  <paul@codesourcery.com>
 548
 549         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 550
 551 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 552
 553         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 554         include cgen-ops.h in decodev10.c and decodev32.c.
 555         * cris/sim-main.h: Don't include cgen-ops.h here.
 556         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 557         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 558         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 559         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 560         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 561         cris/semcrisv32f-switch.c: Regenerate.
 562
 563         * cris/traps.c (cris_break_13_handler) <case
 564         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 565         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 566
 567 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 568
 569         * cris/configure: Regenerate.
 570
 571 2005-02-28  Jim Blandy  <jimb@redhat.com>
 572
 573         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 574         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 575         Regenerated, after change to common/aclocal.m4.
 576
 577 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 578
 579         * iq2000: New target subdirectory.
 580         * configure.ac: Add iq2000 target.
 581         * configure: Regenerate.
 582
 583 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 584
 585         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 586         (realclean, install): Fail if subdir make failed.
 587
 588 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 589
 590         * cris: New directory, simulator for Axis Communications CRIS
 591         including CRIS v32, CGEN-based.
 592         * configure.ac: Add corresponding configury.
 593         * configure: Regenerate.
 594
 595 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 596
 597         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 598         common directory.  Remove sparc*-*-* from list.
 599
 600 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 601
 602         * Makefile.in (autoconf-common autoheader-common): Add --force to
 603         autoconf and autoheader.
 604         (autoconf-common autoheader-common)
 605         (autoconf-install autoheader-install): Check for configure.ac, not
 606         configure.in.
 607         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 608         * configure: Re-generate.
 609
 610 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 611
 612         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 613         correctly calls AC_CONFIG_SUBDIRS.
 614         * configure: Re-generate.
 615
 616 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 617
 618         * i960, h8500: Delete directory.
 619
 620 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 621
 622         * d30v, fr30, mn10200, z8k: Delete directory.
 623
 624 2004-03-10  Ben Elliston  <bje@gnu.org>
 625
 626         * MAINTAINERS: Update my mail address.
 627
 628 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 629
 630         * configure.in (mips*-*-*): Configure in testsuite.
 631         * configure: Regenerate.
 632
 633 2003-10-08  Dave Brolley  <brolley@redhat.com>
 634
 635         * configure.in: Move frv handling to alphabetically correct placement.
 636
 637 2003-09-03  Andreas Schwab  <schwab@suse.de>
 638
 639         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 640
 641 2003-08-29  Dave Brolley  <brolley@redhat.com>
 642
 643         * MAINTAINERS: Add myself as maintainer of the FRV port.
 644
 645 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 646             Dave Brolley  <brolley@redhat.com>
 647
 648         * frv/: New directory, simulator for the Fujitsu FRV.
 649         * configure.in: Add frv configury.
 650         * configure: Regenerate.
 651
 652 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 653
 654         * MAINTAINERS: Update my mail address.
 655
 656 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 657
 658         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 659         maintenance.  List igen and sh maintainers.  Mention that target
 660         and global maintainers pick up the slack.
 661
 662 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 663
 664         * configure.in: Add testsuite to extra_subdirs for sh.
 665         * configure: Regenerate.
 666
 667 2003-01-23  Nick Clifton  <nickc@redhat.com>
 668
 669         * Add sh2e support:
 670
 671 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 672
 673         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 674
 675 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 676
 677         * MAINTAINERS: Update my email address.
 678
 679 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 680
 681         * w65/: Delete directory.
 682
 683 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 684
 685         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 686         * configure: Re-generate.
 687
 688 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 689
 690         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 691         * configure: Re-generate.
 692
 693 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 694
 695         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 696         id, date and host to be overriden by NAME, ID, DATE and HOST
 697         respectfully.  Use ISO dates.
 698
 699 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 700
 701         * Makefile.in (ChangeLog): New makefile variable.
 702         * README-HACKING: Mention the ChangeLog makefile variable.
 703
 704 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 705
 706         * tic80/: Delete directory.
 707
 708 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 709
 710         * MAINTAINERS: Update my email address.
 711
 712 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 713
 714         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 715
 716 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 717
 718         * MAINTAINERS: Record self as a co-maintainer of just common/.
 719
 720 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 721
 722         * MAINTAINERS: Point to GDB files describing overall maintaince
 723         and check-in procedures.
 724
 725 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 726
 727         * MAINTAINERS: Add myself for ARM portions.
 728
 729 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 730
 731         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 732         * configure: Re-generate.
 733
 734 2001-02-16  Ben Elliston  <bje@redhat.com>
 735
 736         * MAINTAINERS: Add myself for common portions.
 737
 738 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 739
 740         * MAINTAINERS: Added self and Andrew for the mips sim.
 741
 742 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 743
 744         * MAINTAINERS: Added self and Andrew for the ppc sim.
 745
 746 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 747
 748         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 749         * m68hc11: New directory.
 750         * configure.in: Add.
 751         * configure: Regenerate.
 752
 753 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 754
 755         * tic80: New directory.
 756         * configure.in: Add configury.
 757         * configure: Regenerate.
 758
 759 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 760
 761         * configure.in (extra_subdirs): Add testsuite to strongarm
 762         directories.
 763         * configure: Regenerate.
 764
 765 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 766
 767         * MAINTAINERS: New file.  Blank.
 768
 769 1999-11-18  Ben Elliston  <bje@cygnus.com>
 770
 771         * configure.in: Require autoconf 2.13 and remove obsolete
 772         invocation of AC_C_CROSS.
 773         * configure: Regenerate.
 774
 775 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 776
 777         * configure.in: Configure the testsuite directory for thumb.
 778         * configure: Regenerate.
 779
 780 1999-07-16  Ben Elliston  <bje@cygnus.com>
 781
 782         * configure.in: Configure the testsuite directory for arm.
 783         * configure: Regenerate.
 784
 785 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 786
 787         * configure.in: Add support for MCore target.
 788         * configure: Regenerate.
 789
 790 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 791
 792         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 793         RUNTEST instead of commenting out, fixes portability problem.
 794
 795 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 796
 797         * configure.in: Add support for StrongARM target.
 798         * configure: Regenerate.
 799
 800 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 801
 802         * configure.in: Require autoconf 2.12.1 or higher.
 803
 804 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 805
 806         * configure.in (i960-*-*): Add.
 807         * configure: Rebuild.
 808
 809 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 810
 811         * configure.in: Added case for fr30-*-*.
 812         * configure: Regenerated.
 813
 814 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 815
 816         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 817         to allow successful operation on Windows.
 818
 819 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 820
 821         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 822         check can be invoked recursively.
 823
 824 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 825
 826         * configure.in: Build simulator on sparclite and sparc86x targets.
 827         * configure: Regenerate.
 828
 829 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 830
 831         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 832         to autoconf and autoheader.
 833
 834 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 835
 836         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 837         ../common' to autoconf and autoheader.  Unconditionally run
 838         autoconf in every subdir.
 839         (autoconf-changelog autoheader-changelog): Unconditionally run
 840         commands in every subdir.
 841         (autoconf-install autoheader-install): Likewise.
 842
 843 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 844
 845         * Makefile.in:  Get SHELL from configure.
 846         * (FLAGS_TO_PASS):  Pass down SHELL.
 847         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 848         NT native builds.
 849
 850 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 851
 852         * configure.in (extra_subdirs): Enable igen for mn10300.
 853         * configure: Re-generate.
 854
 855 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 856
 857         * configure.in (extra_subdirs): Add support for thumb target.
 858
 859         * configure (extra_subdirs): Add support for thumb target.
 860
 861 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 862
 863         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 864         target.
 865         * configure: Regenerate.
 866
 867 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 868
 869         * configure.in (extra_subdirs): v850ea needs igen.
 870         * configure: Re-generate.
 871
 872 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 873
 874         * configure.in (testdir): When a testsuite directory, add that to
 875         the list of confdirs.
 876
 877 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 878
 879         * configure.in (extra_subdirs): Enable igen ready for V850.
 880
 881 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 882
 883         * configure.in (w65-*-*, only_if_enabled): Set.
 884         * configure: Re-generate.
 885
 886 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 887
 888         * configure.in (sparc*-*-*, only_if_enabled): Set
 889         only_if_enabled=yes.  Check only_if_enabled before enabling a
 890         simulator.
 891         * configure: Regenerate.
 892
 893 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 894
 895         * configure.in (extra_subdirs): Add v850e target.
 896
 897 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 898
 899         * configure.in (extra_subdirs): Add v850ea target.
 900
 901 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 902
 903         * configure.in (sparc*-*-*): Don't build erc32.
 904         * configure: Regenerate.
 905
 906 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 907
 908         * configure.in (m32r-*-*): New target.
 909         * configure: Regenerate.
 910
 911         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 912
 913 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 914
 915         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 916         thought that .NOEXPORT was the default target.
 917
 918 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 919
 920         * Makefile.in (clean mostlyclean): Restore targets accidentally
 921         deleted in earlier change.
 922
 923 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 924
 925         * Makefile.in (autoheader-common, autoheader-changelog,
 926         autoheader-install): Perform autoheader in addition to autoconf.
 927
 928 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
 929
 930         * Makefile.in (autoconf-install): New target.
 931         (autoconf-changelog): Try different way to obtain user name.
 932
 933 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 934
 935         * Makefile.in (autoconf-changelog): New target, update
 936         ChangeLog for all subdirectories - normally used after
 937         autoconf-common target.
 938
 939 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 940
 941         * configure.in (extra_subdirs): Include testsuite for d30v.
 942         * configure: Regenerate.
 943
 944         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
 945         ../gdb/Makefile.in
 946         (check): New rules - drive the testsuite.
 947
 948 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
 949
 950         * configure.in: Add mn10200 configure lines accidentally
 951         removed.
 952         * configure: Regenerated.
 953
 954 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 955
 956         * configure.in (extra_subdirs): Generalize common sub directory
 957         into a list.
 958         (extra_subdirs): For d30v add igen to the list to be built.
 959
 960 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 961
 962         * configure.in (d30v): New target.
 963         * configure: Regenerated.
 964
 965 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
 966
 967         * configure.in: Don't require GCC to build the mn10200
 968         simulator anymore.
 969         * configure: Rebuilt.
 970
 971 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
 972
 973         * configure.in: Don't configure any subdirs if no simulator
 974         is being built.  Don't use erc32 for sparc64.
 975         * configure: Regenerated.
 976
 977 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
 978
 979         * Makefile.in (autoconf-common): New target.
 980         * configure.in: Do configure common.
 981         * configure: Regenerated.
 982
 983 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
 984
 985         * configure configure.in:  Don't configure common anymore.  Files
 986         from common are now built in the individual simualtor directories.
 987         This fixes problems with the WinGDB build procedure.
 988
 989 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
 990
 991         * configure: Enable the mn10200 simulator.
 992
 993 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
 994
 995         * configure.in (configdirs): Add common.
 996         * configure: Regenerated.
 997
 998 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 999
1000         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1001         system V based targets.
1002         * configure: Regenerate.
1003
1004 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1005
1006         * configure.in (--enable-sim-powerpc): Delete.
1007         (--enable-sim): Add.
1008         * configure: Regenerated.
1009
1010 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1011
1012         * configure.in: Only build the V850 simulator if
1013         we are using gcc.
1014         * configure: Rebuild.
1015
1016 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1017
1018         * configure.in: Do build erc32 for DOS and Windows hosts.
1019         * configure: Rebuild.
1020
1021 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1022
1023         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1024         be inherited from the parent.  Remove INSTALL_XFORM and
1025         INSTALL_XFORM1.  Make INSTALL be set from configure.
1026
1027 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1028
1029         * configure.in: Only build the MIPS simulator if we are using
1030         gcc.
1031         * configure: Rebuild.
1032
1033 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1034
1035         * configure.in (v850-*-*): Added V850 simulator.
1036
1037 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1038
1039         * configure.in (d10v-*-*): Added D10V simulator.
1040
1041 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1042
1043         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1044         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1045         (docdir): Removed.
1046         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1047         (AC_PROG_INSTALL): Added.
1048         * configure: Rebuilt.
1049
1050 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1051
1052         * configure.in: Only configure erc32 if using gcc.
1053         * configure: Rebuild.
1054
1055 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1056
1057         * configure.in (sim_target): Build PowerPC simulator for powerpc
1058         System V.4, Solaris, and Elf targets.
1059         * configure: Regenerate with autoconf 2.10.
1060
1061 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1062
1063         * configure.in: Only built erc32 simulator on Unix hosts as it
1064         uses pseudo ttys.
1065         * configure: Regenerated with autoconf 2.8.
1066
1067 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1068
1069         * erc32: Sparc simulator from the ESA.
1070
1071 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1072
1073         From: Miles Bader  <miles@gnu.ai.mit.edu>
1074         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1075         * configure: Regenerate using autoconf.
1076
1077 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1078
1079         * Makefile.in (install): Fix typo.
1080
1081 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1082
1083         * configure: Regenerate with autoconf 2.7.
1084
1085         * Makefile.in (all): Simplify.
1086         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1087         as in the all target.
1088         (distclean, maintainer-clean, realclean): Likewise.
1089         (install): Likewise.
1090
1091 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1092
1093         * Makefile.in (all): Remove extra '\' char from shell script.
1094
1095 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1096
1097         * Makefile.in (all): Avoid a for loop with zero elements, even if
1098         the loop will not be executed because of an if statement.
1099
1100 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1101
1102         * Makefile.in (install): Add missing semicolon in "fi \".
1103
1104 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1105
1106         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1107         defaults from configure.
1108
1109         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1110         configure defaults.
1111         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1112         if either --enable-sim-powerpc is used, or the host compiler is
1113         GCC.
1114
1115 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1116
1117         * configure.in (mips*-*-*): Added "mips" simulator target.
1118         * configure: Re-generated.
1119
1120 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1121
1122         * Makefile.in (BISON): Remove macro.
1123         (FLAGS_TO_PASS): Remove BISON.
1124
1125 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1126
1127         * configure.in:  Explicitly `exit 0' for broken shells.
1128         * configure:  Rebuilt.
1129
1130 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1131
1132         * common/run.c (main): Initialize the callbacks.
1133
1134 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1135
1136         * Makefile.in (maintainer-clean): New synonym for realclean.
1137
1138 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1139
1140         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1141         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1142
1143 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1144
1145         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1146         <cagney@highland.com.au>.
1147         * configure: Regnerate from configure.in.
1148
1149 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1150
1151         * Update all FSF addresses except those in COPYING* files.
1152
1153 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1154
1155         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1156         submakes either default or passed in value.
1157
1158 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1159
1160         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1161           install): Changed targets so that they descend all
1162           subdirectories in $(SUBDIRS).
1163           (*-all, *-clean, *-install): Removed targets.
1164
1165         * configure.in: Don't bother with target makefile fragments, they
1166           are no longer needed.
1167         * configure: regenerated.
1168
1169         * Makefile.in, configure.in: converted to autoconf.
1170         * configure: New file, generated with autconf 2.4.
1171
1172 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1173
1174         * Makefile.in: Support ARM.
1175         * configure.in: Ditto.
1176
1177 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1178
1179         * Makefile.in: Support W65.
1180         * configure.in: Ditto.
1181
1182 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1183
1184         * Makefile.in: Add TAGS target.
1185
1186 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1187
1188         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1189           install-h8300, clean-h8300, all-h8500, install-h8500,
1190           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1191           recursion lines.
1192
1193 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1194
1195         * Makefile.in: remove endian.h trace from h8500
1196
1197 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1198
1199         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1200
1201 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1202
1203         * Makefile.in: make all of the all-* target (except all-nothing)
1204         depend on endian.h, so that if we're not building a simulator, we
1205         don't built endian
1206
1207 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1208
1209         * Makefile.in (check, installcheck): Added dummy targets.
1210
1211 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1212
1213         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1214         explicitly make it, since some makes apparently don't work with
1215         VPATH and .c to executable rules (SunOS make for example).
1216
1217 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1218
1219         * Makefile.in (endian): Add explicit rule for broken makes.
1220
1221 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1222
1223         * Makefile.in (info, install-info): New targets.
1224         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1225         level Makefile.
1226
1227 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1228
1229         * Makefile.in (endian.h): build endian.h via a temporary file so
1230           that we don't leave an incomplete file lying around on
1231           interrupted builds.
1232           (clean): remove endian, e.h, and endian.h.
1233
1234 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1235
1236         * Makefile.in, configure.in: if target isn't supported, build a
1237         harmless makefile.
1238
1239