sim/ChangeLog

   1 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
   2
   3         Update old contact info in GPL license notices.
   4
   5 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
   6
   7         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
   8
   9 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
  10
  11         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
  12         condition.
  13         * common/acinclude.m4: Define lt_cv_dlopen_libs.
  14         * arm/configure: Regenerate.
  15         * avr/configure: Regenerate.
  16         * bfin/configure: Regenerate.
  17         * common/configure: Regenerate.
  18         * cr16/configure: Regenerate.
  19         * cris/configure: Regenerate.
  20         * d10v/configure: Regenerate.
  21         * erc32/configure: Regenerate.
  22         * frv/configure: Regenerate.
  23         * h8300/configure: Regenerate.
  24         * igen/configure: Regenerate.
  25         * iq2000/configure: Regenerate.
  26         * lm32/configure: Regenerate.
  27         * m32c/configure: Regenerate.
  28         * m32r/configure: Regenerate.
  29         * m68hc11/configure: Regenerate.
  30         * mcore/configure: Regenerate.
  31         * microblaze/configure: Regenerate.
  32         * mips/configure: Regenerate.
  33         * mn10300/configure: Regenerate.
  34         * moxie/configure: Regenerate.
  35         * ppc/configure: Regenerate.
  36         * rl78/configure: Regenerate.
  37         * rx/configure: Regenerate.
  38         * sh/configure: Regenerate.
  39         * sh64/configure: Regenerate.
  40         * testsuite/configure: Regenerate.
  41         * v850/configure: Regenerate.
  42
  43 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  44
  45         * MAINTAINERS: Update my email address.
  46
  47 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  48
  49         * mips/basic.exp: Add mips*-mti-elf* target.
  50         * configure.ac: Add mips*-mti-elf* target.
  51         * configure: Regenerate.
  52
  53 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  54
  55         * configure: Regenerate.
  56
  57 2012-06-06  Michael Eager  <eager@eagercon.com>
  58
  59         * microblaze/interp.c (config.h): Add #include.
  60
  61 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  62
  63         * MAINTAINERS (Global Maintainers): New section.  Add Mike
  64         Frysinger.
  65
  66 2011-11-28  DJ Delorie  <dj@redhat.com>
  67
  68         * configure.tgt: Add rl78 support.
  69         * configure: Regenerate.
  70         * rl78: New directory.
  71         * MAINTAINERS: Add myself as RL78 maintainer.
  72
  73 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
  74
  75         * MAINTAINERS: Remove Thiemo Seufer.
  76
  77 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  78
  79         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
  80         * configure: Regenerate.
  81
  82 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
  83
  84         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
  85         handle targets.
  86         * configure: Regenerate.
  87
  88 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
  89
  90         * MAINTAINERS: Add bfin entry.
  91         * configure.tgt (bfin-*-*): Handle bfin targets.
  92         * configure: Regenerate.
  93
  94 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
  95
  96         * .gitignore: Add /*/hw-config.h.
  97
  98 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
  99
 100         * .gitignore: New file.
 101
 102 2010-07-28  DJ Delorie  <dj@redhat.com>
 103
 104         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 105
 106 2010-06-08  Nick Clifton  <nickc@redhat.com>
 107
 108         * reg.c (set_oszc): Use unsigned int for the mask.
 109         (set_szc, set_osz, set_sz): Likewise.
 110
 111 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 112
 113         * configure.ac: Target logic moved out to and included from ...
 114         * configure.tgt: ... this new file.
 115         * configure: Regenerated.
 116
 117 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 118
 119         * README-HACKING: Add more sections.
 120
 121 2010-02-11  Doug Evans  <dje@sebabeach.org>
 122
 123         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 124         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 125         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 126         * cris/semcrisv32f-switch.c: Regenerate.
 127
 128 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 129
 130         * avr/configure: Regenerate.
 131         * cris/configure: Regenerate.
 132         * microblaze/configure: Regenerate.
 133
 134 2010-01-02  Doug Evans  <dje@sebabeach.org>
 135
 136         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 137         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 138         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 139         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 140         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 141         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 142
 143 2010-01-01  Doug Evans  <dje@sebabeach.org>
 144
 145         * cris/mloop.in: Fix copyright year update snafu.
 146
 147 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 148
 149         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 150         * common/common.m4: Use AM_ZLIB to check for zlib support.
 151         * ppc/configure.ac: Likewise.
 152         * arm/configure, avr/configure, common/configure, cr16/configure,
 153         cris/configure, d10v/configure, erc32/configure, frv/configure,
 154         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 155         m32r/configure, m68hc11/configure, mcore/configure,
 156         microblaze/configure, mips/configure, mn10300/configure,
 157         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 158         v850/configure: Regenerate.
 159
 160 2009-11-24  DJ Delorie  <dj@redhat.com>
 161
 162         * rx: New directory.
 163         * configure.ac: Add entry for Renesas RX.
 164         * configure: Regenerate.
 165
 166 2009-11-22  Doug Evans  <dje@sebabeach.org>
 167
 168         * cris/cpuall.h: Regenerate.
 169         * cris/cpuv10.h: Regenerate.
 170         * cris/cpuv32.h: Regenerate.
 171         * cris/decodev10.c: Regenerate.
 172         * cris/decodev10.h: Regenerate.
 173         * cris/decodev32.c: Regenerate.
 174         * cris/decodev32.h: Regenerate.
 175
 176 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 177
 178         * avr/interp.c (sim_write): Allow byte access.
 179         (sim_read): Ditto.
 180
 181 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 182
 183         * avr/interp.c (sim_load): Clear memory before loading.
 184
 185 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 186
 187         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 188
 189 2009-10-23  Doug Evans  <dje@sebabeach.org>
 190
 191         * cris/arch.c: Regenerate.
 192         * cris/arch.h: Regenerate.
 193         * cris/cpuall.h: Regenerate.
 194         * cris/cpuv10.c: Regenerate.
 195         * cris/cpuv10.h: Regenerate.
 196         * cris/cpuv32.c: Regenerate.
 197         * cris/cpuv32.h: Regenerate.
 198         * cris/cris-desc.c: Regenerate.
 199         * cris/cris-desc.h: Regenerate.
 200         * cris/cris-opc.h: Regenerate.
 201         * cris/decodev10.c: Regenerate.
 202         * cris/decodev10.h: Regenerate.
 203         * cris/decodev32.c: Regenerate.
 204         * cris/decodev32.h: Regenerate.
 205         * cris/modelv10.c: Regenerate.
 206         * cris/modelv32.c: Regenerate.
 207         * cris/semcrisv10f-switch.c: Regenerate.
 208         * cris/semcrisv32f-switch.c: Regenerate.
 209
 210 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 211
 212         * avr/interp.c (sim_stop): Return 1.
 213
 214 2009-10-16  Doug Evans  <dje@sebabeach.org>
 215
 216         * MAINTAINERS: Add myself as m32r maintainer.
 217
 218 2009-10-15  Michael Egaer  <eager@eagercon.com>
 219
 220         * MAINTAINERS: Add self as MicroBlaze maintainer.
 221
 222 2009-10-14  Ben Elliston  <bje@gnu.org>
 223
 224         * MAINTAINERS (common): Move myself to "past maintainers" section.
 225
 226 2009-10-06  Michael Eager  <eager@eagercon.com>
 227
 228         * microblaze/interp.c: Add include microblaze-dis.h.
 229
 230 2009-09-23  Michael Eager  <eager@eagercon.com>
 231
 232         * configure: Add microblaze-*.* (not regenerated).
 233         * configure.ac: Likewise.
 234         * microblaze/config.in: New.
 235         * microblaze/configure: Generate.
 236         * microblaze/configure.ac: New.
 237         * microblaze/interp.c: New.
 238         * microblaze/Makefile.in: New.
 239         * microblaze/microblaze.h: New.
 240         * microblaze/microblaze.isa: New.
 241         * microblaze/sim-main.h: New.
 242         * microblaze/sysdep.h: New.
 243
 244 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 245
 246         * avr/config.in: Regenerate.
 247         * avr/configure: Likewise.
 248         * configure: Likewise.
 249         * cris/config.in: Likewise.
 250         * cris/configure: Likewise.
 251
 252         * configure.ac: m4_include toplevel config/override.m4.
 253         * configure: Regenerate.
 254         * avr/configure: Regenerate.
 255         * cris/configure: Regenerate.
 256
 257 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 258
 259         * Makefile.in (datarootdir): New variable.
 260
 261 2009-05-18  Jon Beniston <jon@beniston.com>
 262
 263         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 264         * configure.ac: Add lm32 target.
 265         * lm32: New directory.
 266
 267 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 268
 269         * MAINTAINERS: Orphan ppc.
 270
 271 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 272
 273         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 274         m32c_signal_to_target.  Change signal return values from SIGILL,
 275         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 276         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 277
 278 2009-04-30  Anthony Green  <green@moxielogic.com>
 279
 280         * MAINTAINERS: Add myself for the moxie port.
 281         * moxie: New directory.
 282         * configure.ac: Add entry for moxie.
 283         * configure: Regenerate.
 284
 285 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 286
 287         * avr: New directory.
 288         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 289         * avr/config.in: New file, generated by autoheader.
 290         * avr/configure: New file generated by autoconf.
 291         * configure.ac: Add avr.
 292         * configure: Regenerated.
 293
 294 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 295
 296         * Makefile.in: Add dummy install-pdf, html, and
 297         install-html targets.
 298
 299 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 300
 301         * cris/sim-if.c: Include errno.h.
 302         (cris_start_address, cris_program_offset): New variables.
 303         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 304         enums.
 305         (cris_options): New options --cris-program-offset and
 306         --cris-start-address.
 307         (cris_option_handler): Handle new options.
 308         (cris_program_offset_write, cris_set_section_offset_iterator)
 309         (cris_offset_sections, cris_offset_sections): New functions.
 310         (sim_load): Use cris_program_offset_write as function argument to
 311         cris_load_elf_file, not sim_write.
 312         (struct offsetinfo): New struct.
 313         (cris_handle_interpreter): Fix typo in comment.
 314         (sim_open): Call cris_offset_sections as soon as the bfd of the
 315         infile is available.  Gate bfd validity checks on abfd non-NULL.
 316         (sim_create_inferior): Let cris_start_address when != -1 override
 317         other start-address choices.
 318
 319 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 320
 321         * cris/traps.c (abort): Define to call sim_io_error.
 322         (create_map): Make -1 imply a non-fixed address, not 0.  All
 323         callers changed.  Only prefer the next higher unmapped address if
 324         the last mapped address is no less than 0x40000000.  Check that
 325         the address to be mapped is not already mapped.  Update head
 326         comment.
 327         (unmap_pages): Don't call abort when recursive call fails, just
 328         note and return an error if a page in the range couldn't be unmapped.
 329         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 330         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 331         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 332         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 333         don't abort on page not being mapped.  Handle non-anon filemap
 334         with length padded to pagesize.
 335
 336 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 337
 338         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 339         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 340         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 341         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 342         (TARGET_AT_CLKTCK): Remove redundant macros.
 343         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 344         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 345         callers.
 346         (sim_open): Also pass AT_SECURE.
 347
 348         * cris/sim-main.h (struct _sim_cpu): New member
 349         set_target_thread_data.
 350         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 351         * cris/crisv10f.c: Ditto.
 352         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 353         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 354         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 355         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 356         case.
 357
 358         * cris/traps.c (TARGET_SYS_exit_group): Define.
 359         (cris_break_13_handler): Handle it like the exit for the last
 360         thread.
 361
 362         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 363         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 364         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 365         2.6.27.  Set machine field to the BFD printable name of the
 366         machine.
 367
 368         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 369         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 370         TARGET_MAP_DENYWRITE.
 371
 372         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 373         (TARGET_X_OK, TARGET_F_OK): Define.
 374         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 375
 376         * cris/semcrisv32f-switch.c: Regenerate.
 377
 378 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 379
 380         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 381         just a short CRIS-specific notice.  Tweak the wording for a
 382         failing architecture test.
 383
 384         * cris/traps.c (TARGET_SYS_writev): New macro.
 385         (is_mapped_only, cris_dump_map): New functions.
 386         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 387         and prot combinations and a non-zero page-offset.  If
 388         TARGET_MAP_FIXED, unmap pages before mapping them.
 389         <case TARGET_SYS_mprotect>: When checking, allow any length
 390         argument.  Don't actually do anything.
 391         <case TARGET_SYS_writev>: New case.
 392
 393         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 394         * cris/sim-if.c: Include elf-bfd.h.
 395         (struct progbounds): New members end_loadmem, start_nonloadmem.
 396         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 397         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 398         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 399         static.  Update head comment.  Set new struct progbounds members.
 400         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 401         variables.
 402         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 403         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 404         functions.
 405         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 406         handling to use auxv_entries.  Improve error message and checking
 407         for invalid programs.  Use new variable abfd for the program
 408         instead of for each access reaching into sd to get it.
 409         (sim_create_inferior): If non-zero, use interp_start_addr instead
 410         of the program start address.
 411         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 412         stale comment.  Always specify little-endian.
 413
 414 2008-07-29  Nick Clifton  <nickc@redhat.com>
 415
 416         * common/genmloop.sh: Add new parameter: -shell to specify the
 417         command interpreter to use to run the input file.  This is
 418         necessary because otherwise SHELL is taken from the user's
 419         environment, and not from the makefile that invoked this script
 420         and the user might not be running an sh-like shell.
 421         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 422         * fr30/Makefile.in: Likewise.
 423         * frv/Makefile.in: Likewise.
 424         * i960/Makefile.in: Likewise.
 425         * iq2000/Makefile.in: Likewise.
 426         * m32r/Makefile.in: Likewise.
 427
 428         * frv/mloop.in: Add missing start of line comment marker.
 429
 430 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 431
 432         * cris/configure: Regenerate to track ../common/common.m4 changes.
 433         * cris/config.in: Ditto.
 434
 435 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 436             Daniel Jacobowitz  <dan@codesourcery.com>
 437             Joseph Myers  <joseph@codesourcery.com>
 438
 439         * cris/configure: Regenerate.
 440
 441 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 442
 443         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 444
 445 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 446
 447         * MAINTAINERS: Add myself as maintainer of cr16 port.
 448
 449 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 450
 451         Add simulator for National cr16 processor.
 452         * cr16: New directory.
 453         * configure.ac: Add entry for National cr16.
 454         * configure: Regenerate.
 455
 456 2008-02-05  DJ Delorie  <dj@redhat.com>
 457
 458         * configure.ac (v850): V850 now has a testsuite.
 459         * configure (v850): Likewise.
 460
 461 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 462
 463         Updated copyright notices for most files.
 464
 465 2007-12-19  DJ Delorie  <dj@redhat.com>
 466
 467         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 468         cut_point.
 469
 470 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 471
 472         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 473         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 474         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 475         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 476         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 477         cris/semcrisv32f-switch.c: Regenerate.
 478
 479 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 480
 481         Switch the license of all files explicitly copyright the FSF
 482         to GPLv3.
 483
 484 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 485
 486         * Makefile.in: Add dummy "pdf" target.
 487
 488 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 489
 490         * cris/traps.c (dump_statistics): Change format for cycle numbers
 491         to %llu and cast parameters to unsigned long long.
 492
 493 2007-02-16  Thiemo Seufer  <ths@mips.com>
 494
 495         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 496
 497 2007-01-28  Manuel Lauss  <slauss@resi.at>
 498
 499         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 500         (sh-*-*): Change to sh*-*-*.
 501         * configure: Regenerated.
 502
 503 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 504
 505         Updated copyright notices for most files.
 506
 507 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 508
 509         * Makefile.in (autoconf-common autoheader-common): Only run
 510         autoheader on subdirs with a file config.in.
 511
 512         * configure.ac (common): Make the default "yes" for all targets
 513         with sim subdirs.
 514         * configure: Regenerate.
 515
 516         * Makefile.in (autoconf-common autoheader-common): In documented
 517         usage, say SHELL=/bin/sh.
 518         (.PHONY): Add autoheader-common.
 519
 520         * MAINTAINERS: Add self as authorized committer for *.
 521
 522 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 523             Hans-Peter Nilsson  <hp@axis.com>
 524
 525         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 526         (cris_unknown_syscall_action): Declare.
 527         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 528         (cris_options): Add cris-unknown-syscall option.
 529         (cris_option_handler): Correct comment about and error message for
 530         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 531         * cris/traps.c: Include stdarg.h
 532         (cris_unknown_syscall): New function.
 533         (cris_break_13_handler): Instead of sim_io_eprintf and
 534         sim_engine_halt, call cris_unknown_syscall to handle more or less
 535         unknown syscalls.  Adjust code as necessary to handle return
 536         value.
 537
 538 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 539
 540         * MAINTAINERS: Add Dave Brolley for sh64.
 541
 542 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 543
 544         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 545         (cris_pipe_empty): Correct initialization of "remaining".  Only
 546         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 547         are written.
 548
 549 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 550
 551         * cris/configure.ac: Check for limits.h and sys/param.h.
 552         * cris/configure, cris/config.in: Rebuild.
 553         * cris/traps.c (SIM_PATHMAX): New macro.
 554         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 555
 556 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 557
 558         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 559         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 560         * configure: Regenerated.
 561
 562 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 563
 564         * cris/configure: Regenerated.
 565
 566 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 567
 568         * cris/configure: Regenerated.
 569
 570 2006-05-05  Andreas Schwab  <schwab@suse.de>
 571
 572         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 573         * configure: Regenerate.
 574
 575         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 576         (CC_FOR_BUILD): Don't override.
 577         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 578
 579 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 580
 581         * MAINTAINERS: Add an "Authorized committers" section, and list
 582         DJ Delorie for v850.
 583
 584 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 585
 586         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 587
 588 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 589
 590         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 591         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 592         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 593         (all): Depend on rvdummy$(EXEEXT).
 594         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 595         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 596         default off.
 597         * cris/configure: Regenerate.
 598         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 599         (enum cris_interrupt_type, crisv10deliver_interrupt)
 600         (crisv32deliver_interrupt: New declarations.
 601         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 602         sim_events_tickn and set state-events member work_pending when it's
 603         time for the next event.
 604         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 605         interrupt-delivery function.
 606         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 607         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 608         * cris/devices.c: Include hw-device.h.
 609         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 610         (device_io_write_buffer): Only perform 0x900000xx-functions if
 611         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 612         call hw_io_write_buffer.  Add return 0 last in function.
 613         * cris/sim-if.c (cris_have_900000xxif): Now global.
 614         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 615         Force "-model" option, effectively.
 616         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 617         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 618
 619 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 620
 621         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 622         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 623         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 624
 625 2006-03-13  DJ Delorie  <dj@redhat.com>
 626
 627         * MAINTAINERS: Add self as m32c sim maintainer.
 628
 629 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 630
 631         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 632         mapping.
 633         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 634
 635 2006-01-23  Jim Blandy  <jimb@redhat.com>
 636
 637         Add simulator for Renesas M32C and M16C.
 638
 639         * m32c: New directory.
 640         * configure.ac: Add entry for Renesas M32C.
 641         * configure: Regenerate.
 642
 643 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 644
 645         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 646         cycle count for the current insn.
 647
 648 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 649
 650         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 651         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 652         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 653         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 654
 655 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 656
 657         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 658         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 659         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 660         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 661         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 662         cris/semcrisv32f-switch.c: Regenerate.
 663
 664 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 665
 666         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 667         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 668         TARGET_O_WRONLY.
 669         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 670         F_GETFL on fd 0, 1 and 2.
 671
 672 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 673
 674         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 675         last_open_fd, last_open_flags.
 676         * cris/traps.c: Don't include targ-vals.h.
 677         (TARGET_O_ACCMODE): Define.
 678         (cris_break_13_handler): Set new _sim_cpu members.
 679         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 680         Rearrange code as switch.  Emit "unimplemented" abort for
 681         unimplemented fcntl calls.
 682
 683         * cris/traps.c (TARGET_SYS_stat): Define.
 684         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 685         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 686
 687 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 688
 689         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 690         low 32 bits are used after an unsigned long cast.
 691
 692 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 693
 694         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 695
 696 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 697
 698         * MAINTAINERS: Update my mail address, move myself to the
 699         "Past maintainers" section.
 700
 701 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 702
 703         * configure.ac: Add igen to v850 build.
 704         * configure: Regenerate.
 705
 706 2005-04-29  Paul Brook  <paul@codesourcery.com>
 707
 708         * common/callback.c (PIPE_BUF): Provide default definition.
 709         (os_lstat): Use stat if lstat is not available on the host.
 710         (os_ftruncate): Return EINVAL if not available on the host.
 711         (os_truncate): Ditto.
 712         * common/configure.ac: Check for lstat, truncate and ftruncate.
 713         * common/configure: Regenerate.
 714         * common/config.in: Regenerate.
 715
 716 2005-04-27  Paul Brook  <paul@codesourcery.com>
 717
 718         * common/Make-common.in: Add $(EXEEXT) to "run".
 719
 720 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 721
 722         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 723         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 724         implemented.  In call to create_map, pad length argument to 8k.
 725
 726 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 727
 728         * configure.ac: Add explicit sh64 case.
 729         * configure: Regenerate.
 730
 731 2005-03-30  Paul Brook  <paul@codesourcery.com>
 732
 733         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 734
 735 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 736
 737         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 738         include cgen-ops.h in decodev10.c and decodev32.c.
 739         * cris/sim-main.h: Don't include cgen-ops.h here.
 740         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 741         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 742         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 743         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 744         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 745         cris/semcrisv32f-switch.c: Regenerate.
 746
 747         * cris/traps.c (cris_break_13_handler) <case
 748         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 749         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 750
 751 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 752
 753         * cris/configure: Regenerate.
 754
 755 2005-02-28  Jim Blandy  <jimb@redhat.com>
 756
 757         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 758         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 759         Regenerated, after change to common/aclocal.m4.
 760
 761 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 762
 763         * iq2000: New target subdirectory.
 764         * configure.ac: Add iq2000 target.
 765         * configure: Regenerate.
 766
 767 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 768
 769         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 770         (realclean, install): Fail if subdir make failed.
 771
 772 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 773
 774         * cris: New directory, simulator for Axis Communications CRIS
 775         including CRIS v32, CGEN-based.
 776         * configure.ac: Add corresponding configury.
 777         * configure: Regenerate.
 778
 779 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 780
 781         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 782         common directory.  Remove sparc*-*-* from list.
 783
 784 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 785
 786         * Makefile.in (autoconf-common autoheader-common): Add --force to
 787         autoconf and autoheader.
 788         (autoconf-common autoheader-common)
 789         (autoconf-install autoheader-install): Check for configure.ac, not
 790         configure.in.
 791         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 792         * configure: Re-generate.
 793
 794 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 795
 796         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 797         correctly calls AC_CONFIG_SUBDIRS.
 798         * configure: Re-generate.
 799
 800 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 801
 802         * i960, h8500: Delete directory.
 803
 804 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 805
 806         * d30v, fr30, mn10200, z8k: Delete directory.
 807
 808 2004-03-10  Ben Elliston  <bje@gnu.org>
 809
 810         * MAINTAINERS: Update my mail address.
 811
 812 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 813
 814         * configure.in (mips*-*-*): Configure in testsuite.
 815         * configure: Regenerate.
 816
 817 2003-10-08  Dave Brolley  <brolley@redhat.com>
 818
 819         * configure.in: Move frv handling to alphabetically correct placement.
 820
 821 2003-09-03  Andreas Schwab  <schwab@suse.de>
 822
 823         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 824
 825 2003-08-29  Dave Brolley  <brolley@redhat.com>
 826
 827         * MAINTAINERS: Add myself as maintainer of the FRV port.
 828
 829 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 830             Dave Brolley  <brolley@redhat.com>
 831
 832         * frv/: New directory, simulator for the Fujitsu FRV.
 833         * configure.in: Add frv configury.
 834         * configure: Regenerate.
 835
 836 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 837
 838         * MAINTAINERS: Update my mail address.
 839
 840 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 841
 842         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 843         maintenance.  List igen and sh maintainers.  Mention that target
 844         and global maintainers pick up the slack.
 845
 846 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 847
 848         * configure.in: Add testsuite to extra_subdirs for sh.
 849         * configure: Regenerate.
 850
 851 2003-01-23  Nick Clifton  <nickc@redhat.com>
 852
 853         * Add sh2e support:
 854
 855 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 856
 857         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 858
 859 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 860
 861         * MAINTAINERS: Update my email address.
 862
 863 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 864
 865         * w65/: Delete directory.
 866
 867 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 868
 869         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 870         * configure: Re-generate.
 871
 872 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 873
 874         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 875         * configure: Re-generate.
 876
 877 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 878
 879         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 880         id, date and host to be overriden by NAME, ID, DATE and HOST
 881         respectfully.  Use ISO dates.
 882
 883 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 884
 885         * Makefile.in (ChangeLog): New makefile variable.
 886         * README-HACKING: Mention the ChangeLog makefile variable.
 887
 888 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 889
 890         * tic80/: Delete directory.
 891
 892 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 893
 894         * MAINTAINERS: Update my email address.
 895
 896 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 897
 898         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 899
 900 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 901
 902         * MAINTAINERS: Record self as a co-maintainer of just common/.
 903
 904 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 905
 906         * MAINTAINERS: Point to GDB files describing overall maintaince
 907         and check-in procedures.
 908
 909 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 910
 911         * MAINTAINERS: Add myself for ARM portions.
 912
 913 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 914
 915         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 916         * configure: Re-generate.
 917
 918 2001-02-16  Ben Elliston  <bje@redhat.com>
 919
 920         * MAINTAINERS: Add myself for common portions.
 921
 922 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 923
 924         * MAINTAINERS: Added self and Andrew for the mips sim.
 925
 926 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 927
 928         * MAINTAINERS: Added self and Andrew for the ppc sim.
 929
 930 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 931
 932         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 933         * m68hc11: New directory.
 934         * configure.in: Add.
 935         * configure: Regenerate.
 936
 937 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 938
 939         * tic80: New directory.
 940         * configure.in: Add configury.
 941         * configure: Regenerate.
 942
 943 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 944
 945         * configure.in (extra_subdirs): Add testsuite to strongarm
 946         directories.
 947         * configure: Regenerate.
 948
 949 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 950
 951         * MAINTAINERS: New file.  Blank.
 952
 953 1999-11-18  Ben Elliston  <bje@cygnus.com>
 954
 955         * configure.in: Require autoconf 2.13 and remove obsolete
 956         invocation of AC_C_CROSS.
 957         * configure: Regenerate.
 958
 959 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 960
 961         * configure.in: Configure the testsuite directory for thumb.
 962         * configure: Regenerate.
 963
 964 1999-07-16  Ben Elliston  <bje@cygnus.com>
 965
 966         * configure.in: Configure the testsuite directory for arm.
 967         * configure: Regenerate.
 968
 969 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 970
 971         * configure.in: Add support for MCore target.
 972         * configure: Regenerate.
 973
 974 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 975
 976         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 977         RUNTEST instead of commenting out, fixes portability problem.
 978
 979 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 980
 981         * configure.in: Add support for StrongARM target.
 982         * configure: Regenerate.
 983
 984 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 985
 986         * configure.in: Require autoconf 2.12.1 or higher.
 987
 988 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 989
 990         * configure.in (i960-*-*): Add.
 991         * configure: Rebuild.
 992
 993 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 994
 995         * configure.in: Added case for fr30-*-*.
 996         * configure: Regenerated.
 997
 998 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 999
1000         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1001         to allow successful operation on Windows.
1002
1003 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1004
1005         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1006         check can be invoked recursively.
1007
1008 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1009
1010         * configure.in: Build simulator on sparclite and sparc86x targets.
1011         * configure: Regenerate.
1012
1013 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1014
1015         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1016         to autoconf and autoheader.
1017
1018 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1019
1020         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1021         ../common' to autoconf and autoheader.  Unconditionally run
1022         autoconf in every subdir.
1023         (autoconf-changelog autoheader-changelog): Unconditionally run
1024         commands in every subdir.
1025         (autoconf-install autoheader-install): Likewise.
1026
1027 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1028
1029         * Makefile.in:  Get SHELL from configure.
1030         * (FLAGS_TO_PASS):  Pass down SHELL.
1031         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1032         NT native builds.
1033
1034 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1035
1036         * configure.in (extra_subdirs): Enable igen for mn10300.
1037         * configure: Re-generate.
1038
1039 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1040
1041         * configure.in (extra_subdirs): Add support for thumb target.
1042
1043         * configure (extra_subdirs): Add support for thumb target.
1044
1045 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1046
1047         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1048         target.
1049         * configure: Regenerate.
1050
1051 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1052
1053         * configure.in (extra_subdirs): v850ea needs igen.
1054         * configure: Re-generate.
1055
1056 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1057
1058         * configure.in (testdir): When a testsuite directory, add that to
1059         the list of confdirs.
1060
1061 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1062
1063         * configure.in (extra_subdirs): Enable igen ready for V850.
1064
1065 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1066
1067         * configure.in (w65-*-*, only_if_enabled): Set.
1068         * configure: Re-generate.
1069
1070 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1071
1072         * configure.in (sparc*-*-*, only_if_enabled): Set
1073         only_if_enabled=yes.  Check only_if_enabled before enabling a
1074         simulator.
1075         * configure: Regenerate.
1076
1077 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1078
1079         * configure.in (extra_subdirs): Add v850e target.
1080
1081 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1082
1083         * configure.in (extra_subdirs): Add v850ea target.
1084
1085 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1086
1087         * configure.in (sparc*-*-*): Don't build erc32.
1088         * configure: Regenerate.
1089
1090 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1091
1092         * configure.in (m32r-*-*): New target.
1093         * configure: Regenerate.
1094
1095         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1096
1097 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1098
1099         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1100         thought that .NOEXPORT was the default target.
1101
1102 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1103
1104         * Makefile.in (clean mostlyclean): Restore targets accidentally
1105         deleted in earlier change.
1106
1107 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1108
1109         * Makefile.in (autoheader-common, autoheader-changelog,
1110         autoheader-install): Perform autoheader in addition to autoconf.
1111
1112 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1113
1114         * Makefile.in (autoconf-install): New target.
1115         (autoconf-changelog): Try different way to obtain user name.
1116
1117 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1118
1119         * Makefile.in (autoconf-changelog): New target, update
1120         ChangeLog for all subdirectories - normally used after
1121         autoconf-common target.
1122
1123 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1124
1125         * configure.in (extra_subdirs): Include testsuite for d30v.
1126         * configure: Regenerate.
1127
1128         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1129         ../gdb/Makefile.in
1130         (check): New rules - drive the testsuite.
1131
1132 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1133
1134         * configure.in: Add mn10200 configure lines accidentally
1135         removed.
1136         * configure: Regenerated.
1137
1138 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1139
1140         * configure.in (extra_subdirs): Generalize common sub directory
1141         into a list.
1142         (extra_subdirs): For d30v add igen to the list to be built.
1143
1144 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1145
1146         * configure.in (d30v): New target.
1147         * configure: Regenerated.
1148
1149 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1150
1151         * configure.in: Don't require GCC to build the mn10200
1152         simulator anymore.
1153         * configure: Rebuilt.
1154
1155 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1156
1157         * configure.in: Don't configure any subdirs if no simulator
1158         is being built.  Don't use erc32 for sparc64.
1159         * configure: Regenerated.
1160
1161 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1162
1163         * Makefile.in (autoconf-common): New target.
1164         * configure.in: Do configure common.
1165         * configure: Regenerated.
1166
1167 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1168
1169         * configure configure.in:  Don't configure common anymore.  Files
1170         from common are now built in the individual simualtor directories.
1171         This fixes problems with the WinGDB build procedure.
1172
1173 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1174
1175         * configure: Enable the mn10200 simulator.
1176
1177 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1178
1179         * configure.in (configdirs): Add common.
1180         * configure: Regenerated.
1181
1182 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1183
1184         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1185         system V based targets.
1186         * configure: Regenerate.
1187
1188 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1189
1190         * configure.in (--enable-sim-powerpc): Delete.
1191         (--enable-sim): Add.
1192         * configure: Regenerated.
1193
1194 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1195
1196         * configure.in: Only build the V850 simulator if
1197         we are using gcc.
1198         * configure: Rebuild.
1199
1200 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1201
1202         * configure.in: Do build erc32 for DOS and Windows hosts.
1203         * configure: Rebuild.
1204
1205 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1206
1207         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1208         be inherited from the parent.  Remove INSTALL_XFORM and
1209         INSTALL_XFORM1.  Make INSTALL be set from configure.
1210
1211 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1212
1213         * configure.in: Only build the MIPS simulator if we are using
1214         gcc.
1215         * configure: Rebuild.
1216
1217 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1218
1219         * configure.in (v850-*-*): Added V850 simulator.
1220
1221 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1222
1223         * configure.in (d10v-*-*): Added D10V simulator.
1224
1225 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1226
1227         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1228         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1229         (docdir): Removed.
1230         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1231         (AC_PROG_INSTALL): Added.
1232         * configure: Rebuilt.
1233
1234 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1235
1236         * configure.in: Only configure erc32 if using gcc.
1237         * configure: Rebuild.
1238
1239 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1240
1241         * configure.in (sim_target): Build PowerPC simulator for powerpc
1242         System V.4, Solaris, and Elf targets.
1243         * configure: Regenerate with autoconf 2.10.
1244
1245 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1246
1247         * configure.in: Only built erc32 simulator on Unix hosts as it
1248         uses pseudo ttys.
1249         * configure: Regenerated with autoconf 2.8.
1250
1251 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1252
1253         * erc32: Sparc simulator from the ESA.
1254
1255 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1256
1257         From: Miles Bader  <miles@gnu.ai.mit.edu>
1258         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1259         * configure: Regenerate using autoconf.
1260
1261 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1262
1263         * Makefile.in (install): Fix typo.
1264
1265 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1266
1267         * configure: Regenerate with autoconf 2.7.
1268
1269         * Makefile.in (all): Simplify.
1270         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1271         as in the all target.
1272         (distclean, maintainer-clean, realclean): Likewise.
1273         (install): Likewise.
1274
1275 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1276
1277         * Makefile.in (all): Remove extra '\' char from shell script.
1278
1279 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1280
1281         * Makefile.in (all): Avoid a for loop with zero elements, even if
1282         the loop will not be executed because of an if statement.
1283
1284 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1285
1286         * Makefile.in (install): Add missing semicolon in "fi \".
1287
1288 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1289
1290         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1291         defaults from configure.
1292
1293         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1294         configure defaults.
1295         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1296         if either --enable-sim-powerpc is used, or the host compiler is
1297         GCC.
1298
1299 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1300
1301         * configure.in (mips*-*-*): Added "mips" simulator target.
1302         * configure: Re-generated.
1303
1304 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1305
1306         * Makefile.in (BISON): Remove macro.
1307         (FLAGS_TO_PASS): Remove BISON.
1308
1309 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1310
1311         * configure.in:  Explicitly `exit 0' for broken shells.
1312         * configure:  Rebuilt.
1313
1314 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1315
1316         * common/run.c (main): Initialize the callbacks.
1317
1318 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1319
1320         * Makefile.in (maintainer-clean): New synonym for realclean.
1321
1322 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1323
1324         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1325         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1326
1327 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1328
1329         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1330         <cagney@highland.com.au>.
1331         * configure: Regnerate from configure.in.
1332
1333 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1334
1335         * Update all FSF addresses except those in COPYING* files.
1336
1337 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1338
1339         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1340         submakes either default or passed in value.
1341
1342 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1343
1344         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1345           install): Changed targets so that they descend all
1346           subdirectories in $(SUBDIRS).
1347           (*-all, *-clean, *-install): Removed targets.
1348
1349         * configure.in: Don't bother with target makefile fragments, they
1350           are no longer needed.
1351         * configure: regenerated.
1352
1353         * Makefile.in, configure.in: converted to autoconf.
1354         * configure: New file, generated with autconf 2.4.
1355
1356 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1357
1358         * Makefile.in: Support ARM.
1359         * configure.in: Ditto.
1360
1361 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1362
1363         * Makefile.in: Support W65.
1364         * configure.in: Ditto.
1365
1366 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1367
1368         * Makefile.in: Add TAGS target.
1369
1370 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1371
1372         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1373           install-h8300, clean-h8300, all-h8500, install-h8500,
1374           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1375           recursion lines.
1376
1377 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1378
1379         * Makefile.in: remove endian.h trace from h8500
1380
1381 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1382
1383         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1384
1385 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1386
1387         * Makefile.in: make all of the all-* target (except all-nothing)
1388         depend on endian.h, so that if we're not building a simulator, we
1389         don't built endian
1390
1391 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1392
1393         * Makefile.in (check, installcheck): Added dummy targets.
1394
1395 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1396
1397         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1398         explicitly make it, since some makes apparently don't work with
1399         VPATH and .c to executable rules (SunOS make for example).
1400
1401 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1402
1403         * Makefile.in (endian): Add explicit rule for broken makes.
1404
1405 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1406
1407         * Makefile.in (info, install-info): New targets.
1408         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1409         level Makefile.
1410
1411 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1412
1413         * Makefile.in (endian.h): build endian.h via a temporary file so
1414           that we don't leave an incomplete file lying around on
1415           interrupted builds.
1416           (clean): remove endian, e.h, and endian.h.
1417
1418 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1419
1420         * Makefile.in, configure.in: if target isn't supported, build a
1421         harmless makefile.
1422
1423