sim/ChangeLog

   1 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
   2
   3         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
   4         condition.
   5         * common/acinclude.m4: Define lt_cv_dlopen_libs.
   6         * arm/configure: Regenerate.
   7         * avr/configure: Regenerate.
   8         * bfin/configure: Regenerate.
   9         * common/configure: Regenerate.
  10         * cr16/configure: Regenerate.
  11         * cris/configure: Regenerate.
  12         * d10v/configure: Regenerate.
  13         * erc32/configure: Regenerate.
  14         * frv/configure: Regenerate.
  15         * h8300/configure: Regenerate.
  16         * igen/configure: Regenerate.
  17         * iq2000/configure: Regenerate.
  18         * lm32/configure: Regenerate.
  19         * m32c/configure: Regenerate.
  20         * m32r/configure: Regenerate.
  21         * m68hc11/configure: Regenerate.
  22         * mcore/configure: Regenerate.
  23         * microblaze/configure: Regenerate.
  24         * mips/configure: Regenerate.
  25         * mn10300/configure: Regenerate.
  26         * moxie/configure: Regenerate.
  27         * ppc/configure: Regenerate.
  28         * rl78/configure: Regenerate.
  29         * rx/configure: Regenerate.
  30         * sh/configure: Regenerate.
  31         * sh64/configure: Regenerate.
  32         * testsuite/configure: Regenerate.
  33         * v850/configure: Regenerate.
  34
  35 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  36
  37         * MAINTAINERS: Update my email address.
  38
  39 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  40
  41         * mips/basic.exp: Add mips*-mti-elf* target.
  42         * configure.ac: Add mips*-mti-elf* target.
  43         * configure: Regenerate.
  44
  45 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  46
  47         * configure: Regenerate.
  48
  49 2012-06-06  Michael Eager  <eager@eagercon.com>
  50
  51         * microblaze/interp.c (config.h): Add #include.
  52
  53 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  54
  55         * MAINTAINERS (Global Maintainers): New section.  Add Mike
  56         Frysinger.
  57
  58 2011-11-28  DJ Delorie  <dj@redhat.com>
  59
  60         * configure.tgt: Add rl78 support.
  61         * configure: Regenerate.
  62         * rl78: New directory.
  63         * MAINTAINERS: Add myself as RL78 maintainer.
  64
  65 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
  66
  67         * MAINTAINERS: Remove Thiemo Seufer.
  68
  69 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  70
  71         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
  72         * configure: Regenerate.
  73
  74 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
  75
  76         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
  77         handle targets.
  78         * configure: Regenerate.
  79
  80 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
  81
  82         * MAINTAINERS: Add bfin entry.
  83         * configure.tgt (bfin-*-*): Handle bfin targets.
  84         * configure: Regenerate.
  85
  86 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
  87
  88         * .gitignore: Add /*/hw-config.h.
  89
  90 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
  91
  92         * .gitignore: New file.
  93
  94 2010-07-28  DJ Delorie  <dj@redhat.com>
  95
  96         * MAINTAINERS: Add self as RX maintainer.  Sort list.
  97
  98 2010-06-08  Nick Clifton  <nickc@redhat.com>
  99
 100         * reg.c (set_oszc): Use unsigned int for the mask.
 101         (set_szc, set_osz, set_sz): Likewise.
 102
 103 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 104
 105         * configure.ac: Target logic moved out to and included from ...
 106         * configure.tgt: ... this new file.
 107         * configure: Regenerated.
 108
 109 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 110
 111         * README-HACKING: Add more sections.
 112
 113 2010-02-11  Doug Evans  <dje@sebabeach.org>
 114
 115         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 116         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 117         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 118         * cris/semcrisv32f-switch.c: Regenerate.
 119
 120 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 121
 122         * avr/configure: Regenerate.
 123         * cris/configure: Regenerate.
 124         * microblaze/configure: Regenerate.
 125
 126 2010-01-02  Doug Evans  <dje@sebabeach.org>
 127
 128         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 129         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 130         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 131         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 132         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 133         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 134
 135 2010-01-01  Doug Evans  <dje@sebabeach.org>
 136
 137         * cris/mloop.in: Fix copyright year update snafu.
 138
 139 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 140
 141         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 142         * common/common.m4: Use AM_ZLIB to check for zlib support.
 143         * ppc/configure.ac: Likewise.
 144         * arm/configure, avr/configure, common/configure, cr16/configure,
 145         cris/configure, d10v/configure, erc32/configure, frv/configure,
 146         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 147         m32r/configure, m68hc11/configure, mcore/configure,
 148         microblaze/configure, mips/configure, mn10300/configure,
 149         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 150         v850/configure: Regenerate.
 151
 152 2009-11-24  DJ Delorie  <dj@redhat.com>
 153
 154         * rx: New directory.
 155         * configure.ac: Add entry for Renesas RX.
 156         * configure: Regenerate.
 157
 158 2009-11-22  Doug Evans  <dje@sebabeach.org>
 159
 160         * cris/cpuall.h: Regenerate.
 161         * cris/cpuv10.h: Regenerate.
 162         * cris/cpuv32.h: Regenerate.
 163         * cris/decodev10.c: Regenerate.
 164         * cris/decodev10.h: Regenerate.
 165         * cris/decodev32.c: Regenerate.
 166         * cris/decodev32.h: Regenerate.
 167
 168 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 169
 170         * avr/interp.c (sim_write): Allow byte access.
 171         (sim_read): Ditto.
 172
 173 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 174
 175         * avr/interp.c (sim_load): Clear memory before loading.
 176
 177 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 178
 179         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 180
 181 2009-10-23  Doug Evans  <dje@sebabeach.org>
 182
 183         * cris/arch.c: Regenerate.
 184         * cris/arch.h: Regenerate.
 185         * cris/cpuall.h: Regenerate.
 186         * cris/cpuv10.c: Regenerate.
 187         * cris/cpuv10.h: Regenerate.
 188         * cris/cpuv32.c: Regenerate.
 189         * cris/cpuv32.h: Regenerate.
 190         * cris/cris-desc.c: Regenerate.
 191         * cris/cris-desc.h: Regenerate.
 192         * cris/cris-opc.h: Regenerate.
 193         * cris/decodev10.c: Regenerate.
 194         * cris/decodev10.h: Regenerate.
 195         * cris/decodev32.c: Regenerate.
 196         * cris/decodev32.h: Regenerate.
 197         * cris/modelv10.c: Regenerate.
 198         * cris/modelv32.c: Regenerate.
 199         * cris/semcrisv10f-switch.c: Regenerate.
 200         * cris/semcrisv32f-switch.c: Regenerate.
 201
 202 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 203
 204         * avr/interp.c (sim_stop): Return 1.
 205
 206 2009-10-16  Doug Evans  <dje@sebabeach.org>
 207
 208         * MAINTAINERS: Add myself as m32r maintainer.
 209
 210 2009-10-15  Michael Egaer  <eager@eagercon.com>
 211
 212         * MAINTAINERS: Add self as MicroBlaze maintainer.
 213
 214 2009-10-14  Ben Elliston  <bje@gnu.org>
 215
 216         * MAINTAINERS (common): Move myself to "past maintainers" section.
 217
 218 2009-10-06  Michael Eager  <eager@eagercon.com>
 219
 220         * microblaze/interp.c: Add include microblaze-dis.h.
 221
 222 2009-09-23  Michael Eager  <eager@eagercon.com>
 223
 224         * configure: Add microblaze-*.* (not regenerated).
 225         * configure.ac: Likewise.
 226         * microblaze/config.in: New.
 227         * microblaze/configure: Generate.
 228         * microblaze/configure.ac: New.
 229         * microblaze/interp.c: New.
 230         * microblaze/Makefile.in: New.
 231         * microblaze/microblaze.h: New.
 232         * microblaze/microblaze.isa: New.
 233         * microblaze/sim-main.h: New.
 234         * microblaze/sysdep.h: New.
 235
 236 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 237
 238         * avr/config.in: Regenerate.
 239         * avr/configure: Likewise.
 240         * configure: Likewise.
 241         * cris/config.in: Likewise.
 242         * cris/configure: Likewise.
 243
 244         * configure.ac: m4_include toplevel config/override.m4.
 245         * configure: Regenerate.
 246         * avr/configure: Regenerate.
 247         * cris/configure: Regenerate.
 248
 249 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 250
 251         * Makefile.in (datarootdir): New variable.
 252
 253 2009-05-18  Jon Beniston <jon@beniston.com>
 254
 255         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 256         * configure.ac: Add lm32 target.
 257         * lm32: New directory.
 258
 259 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 260
 261         * MAINTAINERS: Orphan ppc.
 262
 263 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 264
 265         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 266         m32c_signal_to_target.  Change signal return values from SIGILL,
 267         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 268         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 269
 270 2009-04-30  Anthony Green  <green@moxielogic.com>
 271
 272         * MAINTAINERS: Add myself for the moxie port.
 273         * moxie: New directory.
 274         * configure.ac: Add entry for moxie.
 275         * configure: Regenerate.
 276
 277 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 278
 279         * avr: New directory.
 280         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 281         * avr/config.in: New file, generated by autoheader.
 282         * avr/configure: New file generated by autoconf.
 283         * configure.ac: Add avr.
 284         * configure: Regenerated.
 285
 286 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 287
 288         * Makefile.in: Add dummy install-pdf, html, and
 289         install-html targets.
 290
 291 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 292
 293         * cris/sim-if.c: Include errno.h.
 294         (cris_start_address, cris_program_offset): New variables.
 295         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 296         enums.
 297         (cris_options): New options --cris-program-offset and
 298         --cris-start-address.
 299         (cris_option_handler): Handle new options.
 300         (cris_program_offset_write, cris_set_section_offset_iterator)
 301         (cris_offset_sections, cris_offset_sections): New functions.
 302         (sim_load): Use cris_program_offset_write as function argument to
 303         cris_load_elf_file, not sim_write.
 304         (struct offsetinfo): New struct.
 305         (cris_handle_interpreter): Fix typo in comment.
 306         (sim_open): Call cris_offset_sections as soon as the bfd of the
 307         infile is available.  Gate bfd validity checks on abfd non-NULL.
 308         (sim_create_inferior): Let cris_start_address when != -1 override
 309         other start-address choices.
 310
 311 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 312
 313         * cris/traps.c (abort): Define to call sim_io_error.
 314         (create_map): Make -1 imply a non-fixed address, not 0.  All
 315         callers changed.  Only prefer the next higher unmapped address if
 316         the last mapped address is no less than 0x40000000.  Check that
 317         the address to be mapped is not already mapped.  Update head
 318         comment.
 319         (unmap_pages): Don't call abort when recursive call fails, just
 320         note and return an error if a page in the range couldn't be unmapped.
 321         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 322         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 323         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 324         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 325         don't abort on page not being mapped.  Handle non-anon filemap
 326         with length padded to pagesize.
 327
 328 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 329
 330         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 331         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 332         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 333         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 334         (TARGET_AT_CLKTCK): Remove redundant macros.
 335         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 336         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 337         callers.
 338         (sim_open): Also pass AT_SECURE.
 339
 340         * cris/sim-main.h (struct _sim_cpu): New member
 341         set_target_thread_data.
 342         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 343         * cris/crisv10f.c: Ditto.
 344         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 345         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 346         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 347         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 348         case.
 349
 350         * cris/traps.c (TARGET_SYS_exit_group): Define.
 351         (cris_break_13_handler): Handle it like the exit for the last
 352         thread.
 353
 354         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 355         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 356         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 357         2.6.27.  Set machine field to the BFD printable name of the
 358         machine.
 359
 360         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 361         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 362         TARGET_MAP_DENYWRITE.
 363
 364         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 365         (TARGET_X_OK, TARGET_F_OK): Define.
 366         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 367
 368         * cris/semcrisv32f-switch.c: Regenerate.
 369
 370 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 371
 372         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 373         just a short CRIS-specific notice.  Tweak the wording for a
 374         failing architecture test.
 375
 376         * cris/traps.c (TARGET_SYS_writev): New macro.
 377         (is_mapped_only, cris_dump_map): New functions.
 378         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 379         and prot combinations and a non-zero page-offset.  If
 380         TARGET_MAP_FIXED, unmap pages before mapping them.
 381         <case TARGET_SYS_mprotect>: When checking, allow any length
 382         argument.  Don't actually do anything.
 383         <case TARGET_SYS_writev>: New case.
 384
 385         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 386         * cris/sim-if.c: Include elf-bfd.h.
 387         (struct progbounds): New members end_loadmem, start_nonloadmem.
 388         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 389         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 390         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 391         static.  Update head comment.  Set new struct progbounds members.
 392         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 393         variables.
 394         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 395         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 396         functions.
 397         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 398         handling to use auxv_entries.  Improve error message and checking
 399         for invalid programs.  Use new variable abfd for the program
 400         instead of for each access reaching into sd to get it.
 401         (sim_create_inferior): If non-zero, use interp_start_addr instead
 402         of the program start address.
 403         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 404         stale comment.  Always specify little-endian.
 405
 406 2008-07-29  Nick Clifton  <nickc@redhat.com>
 407
 408         * common/genmloop.sh: Add new parameter: -shell to specify the
 409         command interpreter to use to run the input file.  This is
 410         necessary because otherwise SHELL is taken from the user's
 411         environment, and not from the makefile that invoked this script
 412         and the user might not be running an sh-like shell.
 413         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 414         * fr30/Makefile.in: Likewise.
 415         * frv/Makefile.in: Likewise.
 416         * i960/Makefile.in: Likewise.
 417         * iq2000/Makefile.in: Likewise.
 418         * m32r/Makefile.in: Likewise.
 419
 420         * frv/mloop.in: Add missing start of line comment marker.
 421
 422 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 423
 424         * cris/configure: Regenerate to track ../common/common.m4 changes.
 425         * cris/config.in: Ditto.
 426
 427 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 428             Daniel Jacobowitz  <dan@codesourcery.com>
 429             Joseph Myers  <joseph@codesourcery.com>
 430
 431         * cris/configure: Regenerate.
 432
 433 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 434
 435         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 436
 437 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 438
 439         * MAINTAINERS: Add myself as maintainer of cr16 port.
 440
 441 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 442
 443         Add simulator for National cr16 processor.
 444         * cr16: New directory.
 445         * configure.ac: Add entry for National cr16.
 446         * configure: Regenerate.
 447
 448 2008-02-05  DJ Delorie  <dj@redhat.com>
 449
 450         * configure.ac (v850): V850 now has a testsuite.
 451         * configure (v850): Likewise.
 452
 453 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 454
 455         Updated copyright notices for most files.
 456
 457 2007-12-19  DJ Delorie  <dj@redhat.com>
 458
 459         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 460         cut_point.
 461
 462 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 463
 464         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 465         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 466         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 467         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 468         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 469         cris/semcrisv32f-switch.c: Regenerate.
 470
 471 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 472
 473         Switch the license of all files explicitly copyright the FSF
 474         to GPLv3.
 475
 476 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 477
 478         * Makefile.in: Add dummy "pdf" target.
 479
 480 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 481
 482         * cris/traps.c (dump_statistics): Change format for cycle numbers
 483         to %llu and cast parameters to unsigned long long.
 484
 485 2007-02-16  Thiemo Seufer  <ths@mips.com>
 486
 487         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 488
 489 2007-01-28  Manuel Lauss  <slauss@resi.at>
 490
 491         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 492         (sh-*-*): Change to sh*-*-*.
 493         * configure: Regenerated.
 494
 495 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 496
 497         Updated copyright notices for most files.
 498
 499 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 500
 501         * Makefile.in (autoconf-common autoheader-common): Only run
 502         autoheader on subdirs with a file config.in.
 503
 504         * configure.ac (common): Make the default "yes" for all targets
 505         with sim subdirs.
 506         * configure: Regenerate.
 507
 508         * Makefile.in (autoconf-common autoheader-common): In documented
 509         usage, say SHELL=/bin/sh.
 510         (.PHONY): Add autoheader-common.
 511
 512         * MAINTAINERS: Add self as authorized committer for *.
 513
 514 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 515             Hans-Peter Nilsson  <hp@axis.com>
 516
 517         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 518         (cris_unknown_syscall_action): Declare.
 519         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 520         (cris_options): Add cris-unknown-syscall option.
 521         (cris_option_handler): Correct comment about and error message for
 522         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 523         * cris/traps.c: Include stdarg.h
 524         (cris_unknown_syscall): New function.
 525         (cris_break_13_handler): Instead of sim_io_eprintf and
 526         sim_engine_halt, call cris_unknown_syscall to handle more or less
 527         unknown syscalls.  Adjust code as necessary to handle return
 528         value.
 529
 530 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 531
 532         * MAINTAINERS: Add Dave Brolley for sh64.
 533
 534 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 535
 536         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 537         (cris_pipe_empty): Correct initialization of "remaining".  Only
 538         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 539         are written.
 540
 541 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 542
 543         * cris/configure.ac: Check for limits.h and sys/param.h.
 544         * cris/configure, cris/config.in: Rebuild.
 545         * cris/traps.c (SIM_PATHMAX): New macro.
 546         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 547
 548 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 549
 550         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 551         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 552         * configure: Regenerated.
 553
 554 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 555
 556         * cris/configure: Regenerated.
 557
 558 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 559
 560         * cris/configure: Regenerated.
 561
 562 2006-05-05  Andreas Schwab  <schwab@suse.de>
 563
 564         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 565         * configure: Regenerate.
 566
 567         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 568         (CC_FOR_BUILD): Don't override.
 569         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 570
 571 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 572
 573         * MAINTAINERS: Add an "Authorized committers" section, and list
 574         DJ Delorie for v850.
 575
 576 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 577
 578         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 579
 580 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 581
 582         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 583         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 584         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 585         (all): Depend on rvdummy$(EXEEXT).
 586         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 587         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 588         default off.
 589         * cris/configure: Regenerate.
 590         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 591         (enum cris_interrupt_type, crisv10deliver_interrupt)
 592         (crisv32deliver_interrupt: New declarations.
 593         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 594         sim_events_tickn and set state-events member work_pending when it's
 595         time for the next event.
 596         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 597         interrupt-delivery function.
 598         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 599         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 600         * cris/devices.c: Include hw-device.h.
 601         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 602         (device_io_write_buffer): Only perform 0x900000xx-functions if
 603         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 604         call hw_io_write_buffer.  Add return 0 last in function.
 605         * cris/sim-if.c (cris_have_900000xxif): Now global.
 606         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 607         Force "-model" option, effectively.
 608         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 609         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 610
 611 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 612
 613         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 614         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 615         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 616
 617 2006-03-13  DJ Delorie  <dj@redhat.com>
 618
 619         * MAINTAINERS: Add self as m32c sim maintainer.
 620
 621 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 622
 623         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 624         mapping.
 625         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 626
 627 2006-01-23  Jim Blandy  <jimb@redhat.com>
 628
 629         Add simulator for Renesas M32C and M16C.
 630
 631         * m32c: New directory.
 632         * configure.ac: Add entry for Renesas M32C.
 633         * configure: Regenerate.
 634
 635 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 636
 637         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 638         cycle count for the current insn.
 639
 640 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 641
 642         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 643         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 644         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 645         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 646
 647 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 648
 649         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 650         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 651         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 652         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 653         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 654         cris/semcrisv32f-switch.c: Regenerate.
 655
 656 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 657
 658         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 659         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 660         TARGET_O_WRONLY.
 661         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 662         F_GETFL on fd 0, 1 and 2.
 663
 664 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 665
 666         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 667         last_open_fd, last_open_flags.
 668         * cris/traps.c: Don't include targ-vals.h.
 669         (TARGET_O_ACCMODE): Define.
 670         (cris_break_13_handler): Set new _sim_cpu members.
 671         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 672         Rearrange code as switch.  Emit "unimplemented" abort for
 673         unimplemented fcntl calls.
 674
 675         * cris/traps.c (TARGET_SYS_stat): Define.
 676         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 677         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 678
 679 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 680
 681         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 682         low 32 bits are used after an unsigned long cast.
 683
 684 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 685
 686         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 687
 688 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 689
 690         * MAINTAINERS: Update my mail address, move myself to the
 691         "Past maintainers" section.
 692
 693 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 694
 695         * configure.ac: Add igen to v850 build.
 696         * configure: Regenerate.
 697
 698 2005-04-29  Paul Brook  <paul@codesourcery.com>
 699
 700         * common/callback.c (PIPE_BUF): Provide default definition.
 701         (os_lstat): Use stat if lstat is not available on the host.
 702         (os_ftruncate): Return EINVAL if not available on the host.
 703         (os_truncate): Ditto.
 704         * common/configure.ac: Check for lstat, truncate and ftruncate.
 705         * common/configure: Regenerate.
 706         * common/config.in: Regenerate.
 707
 708 2005-04-27  Paul Brook  <paul@codesourcery.com>
 709
 710         * common/Make-common.in: Add $(EXEEXT) to "run".
 711
 712 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 713
 714         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 715         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 716         implemented.  In call to create_map, pad length argument to 8k.
 717
 718 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 719
 720         * configure.ac: Add explicit sh64 case.
 721         * configure: Regenerate.
 722
 723 2005-03-30  Paul Brook  <paul@codesourcery.com>
 724
 725         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 726
 727 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 728
 729         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 730         include cgen-ops.h in decodev10.c and decodev32.c.
 731         * cris/sim-main.h: Don't include cgen-ops.h here.
 732         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 733         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 734         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 735         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 736         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 737         cris/semcrisv32f-switch.c: Regenerate.
 738
 739         * cris/traps.c (cris_break_13_handler) <case
 740         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 741         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 742
 743 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 744
 745         * cris/configure: Regenerate.
 746
 747 2005-02-28  Jim Blandy  <jimb@redhat.com>
 748
 749         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 750         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 751         Regenerated, after change to common/aclocal.m4.
 752
 753 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 754
 755         * iq2000: New target subdirectory.
 756         * configure.ac: Add iq2000 target.
 757         * configure: Regenerate.
 758
 759 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 760
 761         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 762         (realclean, install): Fail if subdir make failed.
 763
 764 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 765
 766         * cris: New directory, simulator for Axis Communications CRIS
 767         including CRIS v32, CGEN-based.
 768         * configure.ac: Add corresponding configury.
 769         * configure: Regenerate.
 770
 771 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 772
 773         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 774         common directory.  Remove sparc*-*-* from list.
 775
 776 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 777
 778         * Makefile.in (autoconf-common autoheader-common): Add --force to
 779         autoconf and autoheader.
 780         (autoconf-common autoheader-common)
 781         (autoconf-install autoheader-install): Check for configure.ac, not
 782         configure.in.
 783         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 784         * configure: Re-generate.
 785
 786 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 787
 788         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 789         correctly calls AC_CONFIG_SUBDIRS.
 790         * configure: Re-generate.
 791
 792 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 793
 794         * i960, h8500: Delete directory.
 795
 796 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 797
 798         * d30v, fr30, mn10200, z8k: Delete directory.
 799
 800 2004-03-10  Ben Elliston  <bje@gnu.org>
 801
 802         * MAINTAINERS: Update my mail address.
 803
 804 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 805
 806         * configure.in (mips*-*-*): Configure in testsuite.
 807         * configure: Regenerate.
 808
 809 2003-10-08  Dave Brolley  <brolley@redhat.com>
 810
 811         * configure.in: Move frv handling to alphabetically correct placement.
 812
 813 2003-09-03  Andreas Schwab  <schwab@suse.de>
 814
 815         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 816
 817 2003-08-29  Dave Brolley  <brolley@redhat.com>
 818
 819         * MAINTAINERS: Add myself as maintainer of the FRV port.
 820
 821 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 822             Dave Brolley  <brolley@redhat.com>
 823
 824         * frv/: New directory, simulator for the Fujitsu FRV.
 825         * configure.in: Add frv configury.
 826         * configure: Regenerate.
 827
 828 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 829
 830         * MAINTAINERS: Update my mail address.
 831
 832 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 833
 834         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 835         maintenance.  List igen and sh maintainers.  Mention that target
 836         and global maintainers pick up the slack.
 837
 838 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 839
 840         * configure.in: Add testsuite to extra_subdirs for sh.
 841         * configure: Regenerate.
 842
 843 2003-01-23  Nick Clifton  <nickc@redhat.com>
 844
 845         * Add sh2e support:
 846
 847 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 848
 849         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 850
 851 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 852
 853         * MAINTAINERS: Update my email address.
 854
 855 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 856
 857         * w65/: Delete directory.
 858
 859 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 860
 861         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 862         * configure: Re-generate.
 863
 864 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 865
 866         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 867         * configure: Re-generate.
 868
 869 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 870
 871         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 872         id, date and host to be overriden by NAME, ID, DATE and HOST
 873         respectfully.  Use ISO dates.
 874
 875 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 876
 877         * Makefile.in (ChangeLog): New makefile variable.
 878         * README-HACKING: Mention the ChangeLog makefile variable.
 879
 880 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 881
 882         * tic80/: Delete directory.
 883
 884 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 885
 886         * MAINTAINERS: Update my email address.
 887
 888 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 889
 890         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 891
 892 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 893
 894         * MAINTAINERS: Record self as a co-maintainer of just common/.
 895
 896 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 897
 898         * MAINTAINERS: Point to GDB files describing overall maintaince
 899         and check-in procedures.
 900
 901 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 902
 903         * MAINTAINERS: Add myself for ARM portions.
 904
 905 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 906
 907         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 908         * configure: Re-generate.
 909
 910 2001-02-16  Ben Elliston  <bje@redhat.com>
 911
 912         * MAINTAINERS: Add myself for common portions.
 913
 914 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 915
 916         * MAINTAINERS: Added self and Andrew for the mips sim.
 917
 918 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 919
 920         * MAINTAINERS: Added self and Andrew for the ppc sim.
 921
 922 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 923
 924         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 925         * m68hc11: New directory.
 926         * configure.in: Add.
 927         * configure: Regenerate.
 928
 929 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 930
 931         * tic80: New directory.
 932         * configure.in: Add configury.
 933         * configure: Regenerate.
 934
 935 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 936
 937         * configure.in (extra_subdirs): Add testsuite to strongarm
 938         directories.
 939         * configure: Regenerate.
 940
 941 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 942
 943         * MAINTAINERS: New file.  Blank.
 944
 945 1999-11-18  Ben Elliston  <bje@cygnus.com>
 946
 947         * configure.in: Require autoconf 2.13 and remove obsolete
 948         invocation of AC_C_CROSS.
 949         * configure: Regenerate.
 950
 951 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 952
 953         * configure.in: Configure the testsuite directory for thumb.
 954         * configure: Regenerate.
 955
 956 1999-07-16  Ben Elliston  <bje@cygnus.com>
 957
 958         * configure.in: Configure the testsuite directory for arm.
 959         * configure: Regenerate.
 960
 961 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 962
 963         * configure.in: Add support for MCore target.
 964         * configure: Regenerate.
 965
 966 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 967
 968         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 969         RUNTEST instead of commenting out, fixes portability problem.
 970
 971 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 972
 973         * configure.in: Add support for StrongARM target.
 974         * configure: Regenerate.
 975
 976 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 977
 978         * configure.in: Require autoconf 2.12.1 or higher.
 979
 980 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 981
 982         * configure.in (i960-*-*): Add.
 983         * configure: Rebuild.
 984
 985 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 986
 987         * configure.in: Added case for fr30-*-*.
 988         * configure: Regenerated.
 989
 990 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 991
 992         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 993         to allow successful operation on Windows.
 994
 995 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 996
 997         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 998         check can be invoked recursively.
 999
1000 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1001
1002         * configure.in: Build simulator on sparclite and sparc86x targets.
1003         * configure: Regenerate.
1004
1005 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1006
1007         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1008         to autoconf and autoheader.
1009
1010 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1011
1012         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1013         ../common' to autoconf and autoheader.  Unconditionally run
1014         autoconf in every subdir.
1015         (autoconf-changelog autoheader-changelog): Unconditionally run
1016         commands in every subdir.
1017         (autoconf-install autoheader-install): Likewise.
1018
1019 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1020
1021         * Makefile.in:  Get SHELL from configure.
1022         * (FLAGS_TO_PASS):  Pass down SHELL.
1023         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1024         NT native builds.
1025
1026 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1027
1028         * configure.in (extra_subdirs): Enable igen for mn10300.
1029         * configure: Re-generate.
1030
1031 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1032
1033         * configure.in (extra_subdirs): Add support for thumb target.
1034
1035         * configure (extra_subdirs): Add support for thumb target.
1036
1037 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1038
1039         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1040         target.
1041         * configure: Regenerate.
1042
1043 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1044
1045         * configure.in (extra_subdirs): v850ea needs igen.
1046         * configure: Re-generate.
1047
1048 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1049
1050         * configure.in (testdir): When a testsuite directory, add that to
1051         the list of confdirs.
1052
1053 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1054
1055         * configure.in (extra_subdirs): Enable igen ready for V850.
1056
1057 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1058
1059         * configure.in (w65-*-*, only_if_enabled): Set.
1060         * configure: Re-generate.
1061
1062 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1063
1064         * configure.in (sparc*-*-*, only_if_enabled): Set
1065         only_if_enabled=yes.  Check only_if_enabled before enabling a
1066         simulator.
1067         * configure: Regenerate.
1068
1069 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1070
1071         * configure.in (extra_subdirs): Add v850e target.
1072
1073 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1074
1075         * configure.in (extra_subdirs): Add v850ea target.
1076
1077 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1078
1079         * configure.in (sparc*-*-*): Don't build erc32.
1080         * configure: Regenerate.
1081
1082 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1083
1084         * configure.in (m32r-*-*): New target.
1085         * configure: Regenerate.
1086
1087         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1088
1089 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1090
1091         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1092         thought that .NOEXPORT was the default target.
1093
1094 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1095
1096         * Makefile.in (clean mostlyclean): Restore targets accidentally
1097         deleted in earlier change.
1098
1099 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1100
1101         * Makefile.in (autoheader-common, autoheader-changelog,
1102         autoheader-install): Perform autoheader in addition to autoconf.
1103
1104 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1105
1106         * Makefile.in (autoconf-install): New target.
1107         (autoconf-changelog): Try different way to obtain user name.
1108
1109 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1110
1111         * Makefile.in (autoconf-changelog): New target, update
1112         ChangeLog for all subdirectories - normally used after
1113         autoconf-common target.
1114
1115 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1116
1117         * configure.in (extra_subdirs): Include testsuite for d30v.
1118         * configure: Regenerate.
1119
1120         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1121         ../gdb/Makefile.in
1122         (check): New rules - drive the testsuite.
1123
1124 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1125
1126         * configure.in: Add mn10200 configure lines accidentally
1127         removed.
1128         * configure: Regenerated.
1129
1130 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1131
1132         * configure.in (extra_subdirs): Generalize common sub directory
1133         into a list.
1134         (extra_subdirs): For d30v add igen to the list to be built.
1135
1136 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1137
1138         * configure.in (d30v): New target.
1139         * configure: Regenerated.
1140
1141 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1142
1143         * configure.in: Don't require GCC to build the mn10200
1144         simulator anymore.
1145         * configure: Rebuilt.
1146
1147 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1148
1149         * configure.in: Don't configure any subdirs if no simulator
1150         is being built.  Don't use erc32 for sparc64.
1151         * configure: Regenerated.
1152
1153 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1154
1155         * Makefile.in (autoconf-common): New target.
1156         * configure.in: Do configure common.
1157         * configure: Regenerated.
1158
1159 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1160
1161         * configure configure.in:  Don't configure common anymore.  Files
1162         from common are now built in the individual simualtor directories.
1163         This fixes problems with the WinGDB build procedure.
1164
1165 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1166
1167         * configure: Enable the mn10200 simulator.
1168
1169 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1170
1171         * configure.in (configdirs): Add common.
1172         * configure: Regenerated.
1173
1174 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1175
1176         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1177         system V based targets.
1178         * configure: Regenerate.
1179
1180 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1181
1182         * configure.in (--enable-sim-powerpc): Delete.
1183         (--enable-sim): Add.
1184         * configure: Regenerated.
1185
1186 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1187
1188         * configure.in: Only build the V850 simulator if
1189         we are using gcc.
1190         * configure: Rebuild.
1191
1192 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1193
1194         * configure.in: Do build erc32 for DOS and Windows hosts.
1195         * configure: Rebuild.
1196
1197 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1198
1199         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1200         be inherited from the parent.  Remove INSTALL_XFORM and
1201         INSTALL_XFORM1.  Make INSTALL be set from configure.
1202
1203 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1204
1205         * configure.in: Only build the MIPS simulator if we are using
1206         gcc.
1207         * configure: Rebuild.
1208
1209 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1210
1211         * configure.in (v850-*-*): Added V850 simulator.
1212
1213 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1214
1215         * configure.in (d10v-*-*): Added D10V simulator.
1216
1217 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1218
1219         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1220         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1221         (docdir): Removed.
1222         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1223         (AC_PROG_INSTALL): Added.
1224         * configure: Rebuilt.
1225
1226 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1227
1228         * configure.in: Only configure erc32 if using gcc.
1229         * configure: Rebuild.
1230
1231 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1232
1233         * configure.in (sim_target): Build PowerPC simulator for powerpc
1234         System V.4, Solaris, and Elf targets.
1235         * configure: Regenerate with autoconf 2.10.
1236
1237 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1238
1239         * configure.in: Only built erc32 simulator on Unix hosts as it
1240         uses pseudo ttys.
1241         * configure: Regenerated with autoconf 2.8.
1242
1243 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1244
1245         * erc32: Sparc simulator from the ESA.
1246
1247 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1248
1249         From: Miles Bader  <miles@gnu.ai.mit.edu>
1250         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1251         * configure: Regenerate using autoconf.
1252
1253 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1254
1255         * Makefile.in (install): Fix typo.
1256
1257 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1258
1259         * configure: Regenerate with autoconf 2.7.
1260
1261         * Makefile.in (all): Simplify.
1262         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1263         as in the all target.
1264         (distclean, maintainer-clean, realclean): Likewise.
1265         (install): Likewise.
1266
1267 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1268
1269         * Makefile.in (all): Remove extra '\' char from shell script.
1270
1271 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1272
1273         * Makefile.in (all): Avoid a for loop with zero elements, even if
1274         the loop will not be executed because of an if statement.
1275
1276 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1277
1278         * Makefile.in (install): Add missing semicolon in "fi \".
1279
1280 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1281
1282         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1283         defaults from configure.
1284
1285         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1286         configure defaults.
1287         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1288         if either --enable-sim-powerpc is used, or the host compiler is
1289         GCC.
1290
1291 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1292
1293         * configure.in (mips*-*-*): Added "mips" simulator target.
1294         * configure: Re-generated.
1295
1296 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1297
1298         * Makefile.in (BISON): Remove macro.
1299         (FLAGS_TO_PASS): Remove BISON.
1300
1301 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1302
1303         * configure.in:  Explicitly `exit 0' for broken shells.
1304         * configure:  Rebuilt.
1305
1306 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1307
1308         * common/run.c (main): Initialize the callbacks.
1309
1310 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1311
1312         * Makefile.in (maintainer-clean): New synonym for realclean.
1313
1314 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1315
1316         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1317         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1318
1319 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1320
1321         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1322         <cagney@highland.com.au>.
1323         * configure: Regnerate from configure.in.
1324
1325 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1326
1327         * Update all FSF addresses except those in COPYING* files.
1328
1329 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1330
1331         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1332         submakes either default or passed in value.
1333
1334 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1335
1336         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1337           install): Changed targets so that they descend all
1338           subdirectories in $(SUBDIRS).
1339           (*-all, *-clean, *-install): Removed targets.
1340
1341         * configure.in: Don't bother with target makefile fragments, they
1342           are no longer needed.
1343         * configure: regenerated.
1344
1345         * Makefile.in, configure.in: converted to autoconf.
1346         * configure: New file, generated with autconf 2.4.
1347
1348 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1349
1350         * Makefile.in: Support ARM.
1351         * configure.in: Ditto.
1352
1353 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1354
1355         * Makefile.in: Support W65.
1356         * configure.in: Ditto.
1357
1358 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1359
1360         * Makefile.in: Add TAGS target.
1361
1362 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1363
1364         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1365           install-h8300, clean-h8300, all-h8500, install-h8500,
1366           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1367           recursion lines.
1368
1369 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1370
1371         * Makefile.in: remove endian.h trace from h8500
1372
1373 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1374
1375         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1376
1377 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1378
1379         * Makefile.in: make all of the all-* target (except all-nothing)
1380         depend on endian.h, so that if we're not building a simulator, we
1381         don't built endian
1382
1383 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1384
1385         * Makefile.in (check, installcheck): Added dummy targets.
1386
1387 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1388
1389         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1390         explicitly make it, since some makes apparently don't work with
1391         VPATH and .c to executable rules (SunOS make for example).
1392
1393 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1394
1395         * Makefile.in (endian): Add explicit rule for broken makes.
1396
1397 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1398
1399         * Makefile.in (info, install-info): New targets.
1400         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1401         level Makefile.
1402
1403 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1404
1405         * Makefile.in (endian.h): build endian.h via a temporary file so
1406           that we don't leave an incomplete file lying around on
1407           interrupted builds.
1408           (clean): remove endian, e.h, and endian.h.
1409
1410 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1411
1412         * Makefile.in, configure.in: if target isn't supported, build a
1413         harmless makefile.
1414
1415