sim/ChangeLog

   1 2019-06-13  Stafford Horne  <shorne@gmail.com>
   2
   3         * or1k/cpu.c: Regenerate.
   4         * or1k/cpu.h: Regenerate.
   5         * or1k/decode.c: Regenerate.
   6         * or1k/decode.h: Regenerate.
   7         * or1k/model.c: Regenerate.
   8         * or1k/sem-switch.c: Regenerate.
   9         * or1k/sem.c: Regenerate.
  10
  11 2019-02-28  Joel Brobecker  <brobecker@adacore.com>
  12
  13         * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
  14
  15 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
  16
  17         * MAINTAINERS: Add Andrew Burgess as global maintainer.
  18
  19 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
  20
  21         * sim-base.h: Add 'extern C' if header is compiled with C++.
  22
  23 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
  24
  25         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
  26         cgen source tree.
  27         * cris/configure: Regenerate.
  28         * frv/configure: Regenerate.
  29         * iq2000/configure: Regenerate.
  30         * lm32/configure: Regenerate.
  31         * m32r/configure: Regenerate.
  32         * or1k/configure: Regenerate.
  33         * sh64/configure: Regenerate.
  34
  35 2018-10-05  Stafford Horne  <shorne@gmail.com>
  36
  37         * or1k/cpu.h: Regenerate.
  38         * or1k/decode.c: Regenerate.
  39         * or1k/decode.h: Regenerate.
  40         * or1k/model.c: Regenerate.
  41         * or1k/sem-switch.c: Regenerate.
  42         * or1k/sem.c: Regenerate:
  43
  44 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  45
  46         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  47         ISA maintenance.
  48
  49 2018-07-19  DJ Delorie  <dj@redhat.com>
  50
  51         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  52
  53 2018-07-14  Stafford Horne  <shorne@gmail.com>
  54
  55         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  56
  57 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  58
  59         * All configure.ac: Remove AC_PREREQ.
  60         * All configure: Re-generate.
  61
  62 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  63
  64         * MAINTAINERS: Update my company e-mail address.
  65
  66 2017-12-12  Stafford Horne  <shorne@gmail.com>
  67             Peter Gavin  <pgavin@gmail.com>
  68
  69         * configure: Regenerated.
  70         * or1k/aclocal.m4: Generated.
  71         * or1k/config.in: Generated.
  72         * or1k/configure: Generated.
  73
  74 2017-12-12  Stafford Horne  <shorne@gmail.com>
  75             Peter Gavin  <pgavin@gmail.com>
  76
  77         * or1k/arch.c: Generated.
  78         * or1k/arch.h: Generated.
  79         * or1k/cpu.c: Generated.
  80         * or1k/cpu.h: Generated.
  81         * or1k/cpuall.h: Generated.
  82         * or1k/decode.c: Generated.
  83         * or1k/decode.h: Generated.
  84         * or1k/model.c: Generated.
  85         * or1k/sem-switch.c: Generated.
  86         * or1k/sem.c: Generated.
  87
  88 2017-12-12  Stafford Horne  <shorne@gmail.com>
  89             Peter Gavin  <pgavin@gmail.com>
  90
  91         * configure.tgt: Add or1k sim.
  92         * or1k/README: New file.
  93         * or1k/Makefile.in: New file.
  94         * or1k/configure.ac: New file.
  95         * or1k/mloop.in: New file.
  96         * or1k/or1k-sim.h: New file.
  97         * or1k/or1k.c: New file.
  98         * or1k/sim-if.c: New file.
  99         * or1k/sim-main.h: New file.
 100         * or1k/traps.c: New file.
 101
 102 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
 103
 104         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
 105
 106 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 107
 108         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
 109
 110 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 111
 112         * MAINTAINERS (ft32): Add myself.
 113
 114 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 115
 116         * MAINTAINERS (aarch64): Update my email address.
 117
 118 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 119
 120         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 121         * configure: Regenerate.
 122
 123 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 124
 125         * MAINTAINTERS (aarch64): Add myself.
 126
 127 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 128
 129         * MAINTAINERS (Maintainers for particular sims): Add myself as
 130         a MIPS maintainer.
 131
 132 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 133
 134         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 135
 136 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 137
 138         * configure.ac: Delete sim_common check and the
 139         AC_CONFIG_SUBDIRS(common) call.
 140         * configure: Regenerate.
 141         * configure.tgt (sim_common): Delete the variable.
 142
 143 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 144
 145         * .gitignore: Delete /common/cconfig.h entry.
 146
 147 2016-01-05  Nick Clifton  <nickc@redhat.com>
 148
 149         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 150
 151 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 152
 153         * aarch64/simulator.c: Remove syscall.h include.
 154
 155 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * README-HACKING: Delete mention of tconfig.h.
 158
 159 2015-11-24  Nick Clifton  <nickc@redhat.com>
 160
 161         * configure.tgt: Add aarch64 entry.
 162         * configure: Regenerate.
 163
 164 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 165
 166         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 167         * configure: Regenerate.
 168
 169 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 170
 171         * README-HACKING: Change configure.in to configure.ac.
 172
 173 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 174
 175         * arm/configure: Regenerated.
 176         * avr/configure: Likewise.
 177         * bfin/configure: Likewise.
 178         * common/configure: Likewise.
 179         * cr16/configure: Likewise.
 180         * cris/configure: Likewise.
 181         * d10v/configure: Likewise.
 182         * erc32/configure: Likewise.
 183         * frv/configure: Likewise.
 184         * ft32/configure: Likewise.
 185         * h8300/configure: Likewise.
 186         * igen/configure: Likewise.
 187         * iq2000/configure: Likewise.
 188         * lm32/configure: Likewise.
 189         * m32c/configure: Likewise.
 190         * m32r/configure: Likewise.
 191         * m68hc11/configure: Likewise.
 192         * mcore/configure: Likewise.
 193         * microblaze/configure: Likewise.
 194         * mips/configure: Likewise.
 195         * mn10300/configure: Likewise.
 196         * moxie/configure: Likewise.
 197         * msp430/configure: Likewise.
 198         * ppc/configure: Likewise.
 199         * rl78/configure: Likewise.
 200         * rx/configure: Likewise.
 201         * sh/configure: Likewise.
 202         * sh64/configure: Likewise.
 203         * v850/configure: Likewise.
 204
 205 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 206
 207         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 208         (BFD_LIB): Remove $(ZLIB).
 209         (CONFIG_LIBS): Add $(ZLIB).
 210         * ppc/Makefile.in (ZLIBINC): Removed.
 211         (INCLUDES): Remove $(ZLIBINC).
 212         (BFD_LIB): Remove $(ZLIB).
 213
 214 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 215
 216         * arm/configure: Regenerated.
 217         * avr/configure: Likewise.
 218         * bfin/configure: Likewise.
 219         * common/configure: Likewise.
 220         * cr16/configure: Likewise.
 221         * cris/configure: Likewise.
 222         * d10v/configure: Likewise.
 223         * erc32/configure: Likewise.
 224         * frv/configure: Likewise.
 225         * ft32/configure: Likewise.
 226         * h8300/configure: Likewise.
 227         * igen/configure: Likewise.
 228         * iq2000/configure: Likewise.
 229         * lm32/configure: Likewise.
 230         * m32c/configure: Likewise.
 231         * m32r/configure: Likewise.
 232         * m68hc11/configure: Likewise.
 233         * mcore/configure: Likewise.
 234         * microblaze/configure: Likewise.
 235         * mips/configure: Likewise.
 236         * mn10300/configure: Likewise.
 237         * moxie/configure: Likewise.
 238         * msp430/configure: Likewise.
 239         * ppc/configure: Likewise.
 240         * rl78/configure: Likewise.
 241         * rx/configure: Likewise.
 242         * sh/configure: Likewise.
 243         * sh64/configure: Likewise.
 244         * v850/configure: Likewise.
 245
 246 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 247
 248         * configure: Regenerate.
 249         * configure.ac: Delete sim_testsuite check and config in testsuite.
 250         * configure.tgt (sim_testsuite): Delete everywhere.
 251
 252 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 253
 254         * configure: Regenerate.
 255         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 256
 257 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 258
 259         * configure.tgt: Add FT32 entry.
 260         * configure: Regenerate.
 261
 262 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 263
 264         * .gitignore: Delete tconfig.h.
 265         * README-HACKING: Change tconfig.in to tconfig.h.
 266
 267 2014-03-12  Nick Clifton  <nickc@redhat.com>
 268
 269         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 270
 271 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 272
 273         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 274         * configure: Regenerate.
 275
 276 2014-01-06  Tom Tromey  <tromey@redhat.com>
 277
 278         * common/cgen-trace.c: Don't use old VA_* macros.
 279         * common/sim-load.c (xprintf): Likewise.
 280         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 281
 282 2014-01-06  Tom Tromey  <tromey@redhat.com>
 283
 284         * README-HACKING: Don't use PARAMS.
 285         * arm/wrapper.c: Don't use PARAMS.
 286         * bfin/sim-main.h: Don't use PARAMS.
 287         * common/callback.c: Don't use PARAMS.
 288         * common/cgen-trace.c: Don't use PARAMS.
 289         * common/run-sim.h: Don't use PARAMS.
 290         * common/run.c: Don't use PARAMS.
 291         * common/sim-base.h: Don't use PARAMS.
 292         * common/sim-load.c: Don't use PARAMS.
 293         * common/sim-options.h: Don't use PARAMS.
 294         * common/sim-trace.c: Don't use PARAMS.
 295         * common/sim-trace.h: Don't use PARAMS.
 296         * common/sim-utils.h: Don't use PARAMS.
 297         * cr16/cr16_sim.h: Don't use PARAMS.
 298         * cr16/gencode.c: Don't use PARAMS.
 299         * cr16/interp.c: Don't use PARAMS.
 300         * cr16/simops.c: Don't use PARAMS.
 301         * d10v/d10v_sim.h: Don't use PARAMS.
 302         * d10v/gencode.c: Don't use PARAMS.
 303         * d10v/interp.c: Don't use PARAMS.
 304         * d10v/simops.c: Don't use PARAMS.
 305         * erc32/erc32.c: Don't use PARAMS.
 306         * erc32/exec.c: Don't use PARAMS.
 307         * erc32/float.c: Don't use PARAMS.
 308         * erc32/func.c: Don't use PARAMS.
 309         * erc32/sis.c: Don't use PARAMS.
 310         * erc32/sis.h: Don't use PARAMS.
 311         * mips/interp.c: Don't use PARAMS.
 312         * mips/sim-main.h: Don't use PARAMS.
 313         * sh/interp.c: Don't use PARAMS.
 314         * v850/sim-main.h: Don't use PARAMS.
 315         * v850/v850_sim.h: Don't use PARAMS.
 316
 317 2013-11-07  Will Newton  <will.newton@linaro.org>
 318
 319         PR gdb/15508
 320         * arm/wrapper.c (sim_create_inferior): Call init before
 321         accessing STATE.
 322
 323 2013-11-07  Will Newton  <will.newton@linaro.org>
 324
 325         PR gdb/8989
 326         * arm/wrapper.c (sim_create_inferior): Avoid calling
 327         bfd_get_mach with a NULL bfd.
 328
 329 2013-06-21  Nick Clifton  <nickc@redhat.com>
 330
 331         * msp430: New Directory.
 332         * configure.tgt: Add it.
 333         * configure: Regenerate.
 334
 335 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 336
 337         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 338         * avr/interp.c (sim_complete_command): Ditto.
 339         * common/sim-options.c (sim_complete_command): Ditto.
 340         * cr16/interp.c (sim_complete_command): Ditto.
 341         * erc32/interf.c (sim_complete_command): Ditto.
 342         * m32c/gdb-if.c (sim_complete_command): Ditto.
 343         * microblaze/interp.c (sim_complete_command): Ditto.
 344         * ppc/sim_calls.c (sim_complete_command): Ditto.
 345         * rl78/gdb-if.c (sim_complete_command): Ditto.
 346         * rx/gdb-if.c (sim_complete_command): Ditto.
 347         * sh/interp.c (sim_complete_command): Ditto.
 348
 349 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 350
 351         Update year range in copyright notice of all files.
 352
 353 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 354
 355         Update old contact info in GPL license notices.
 356
 357 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 358
 359         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 360
 361 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 362
 363         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 364         condition.
 365         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 366         * arm/configure: Regenerate.
 367         * avr/configure: Regenerate.
 368         * bfin/configure: Regenerate.
 369         * common/configure: Regenerate.
 370         * cr16/configure: Regenerate.
 371         * cris/configure: Regenerate.
 372         * d10v/configure: Regenerate.
 373         * erc32/configure: Regenerate.
 374         * frv/configure: Regenerate.
 375         * h8300/configure: Regenerate.
 376         * igen/configure: Regenerate.
 377         * iq2000/configure: Regenerate.
 378         * lm32/configure: Regenerate.
 379         * m32c/configure: Regenerate.
 380         * m32r/configure: Regenerate.
 381         * m68hc11/configure: Regenerate.
 382         * mcore/configure: Regenerate.
 383         * microblaze/configure: Regenerate.
 384         * mips/configure: Regenerate.
 385         * mn10300/configure: Regenerate.
 386         * moxie/configure: Regenerate.
 387         * ppc/configure: Regenerate.
 388         * rl78/configure: Regenerate.
 389         * rx/configure: Regenerate.
 390         * sh/configure: Regenerate.
 391         * sh64/configure: Regenerate.
 392         * testsuite/configure: Regenerate.
 393         * v850/configure: Regenerate.
 394
 395 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 396
 397         * MAINTAINERS: Update my email address.
 398
 399 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 400
 401         * mips/basic.exp: Add mips*-mti-elf* target.
 402         * configure.ac: Add mips*-mti-elf* target.
 403         * configure: Regenerate.
 404
 405 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 406
 407         * configure: Regenerate.
 408
 409 2012-06-06  Michael Eager  <eager@eagercon.com>
 410
 411         * microblaze/interp.c (config.h): Add #include.
 412
 413 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 414
 415         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 416         Frysinger.
 417
 418 2011-11-28  DJ Delorie  <dj@redhat.com>
 419
 420         * configure.tgt: Add rl78 support.
 421         * configure: Regenerate.
 422         * rl78: New directory.
 423         * MAINTAINERS: Add myself as RL78 maintainer.
 424
 425 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 426
 427         * MAINTAINERS: Remove Thiemo Seufer.
 428
 429 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 430
 431         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 432         * configure: Regenerate.
 433
 434 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 435
 436         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 437         handle targets.
 438         * configure: Regenerate.
 439
 440 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 441
 442         * MAINTAINERS: Add bfin entry.
 443         * configure.tgt (bfin-*-*): Handle bfin targets.
 444         * configure: Regenerate.
 445
 446 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 447
 448         * .gitignore: Add /*/hw-config.h.
 449
 450 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 451
 452         * .gitignore: New file.
 453
 454 2010-07-28  DJ Delorie  <dj@redhat.com>
 455
 456         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 457
 458 2010-06-08  Nick Clifton  <nickc@redhat.com>
 459
 460         * reg.c (set_oszc): Use unsigned int for the mask.
 461         (set_szc, set_osz, set_sz): Likewise.
 462
 463 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 464
 465         * configure.ac: Target logic moved out to and included from ...
 466         * configure.tgt: ... this new file.
 467         * configure: Regenerated.
 468
 469 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 470
 471         * README-HACKING: Add more sections.
 472
 473 2010-02-11  Doug Evans  <dje@sebabeach.org>
 474
 475         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 476         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 477         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 478         * cris/semcrisv32f-switch.c: Regenerate.
 479
 480 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 481
 482         * avr/configure: Regenerate.
 483         * cris/configure: Regenerate.
 484         * microblaze/configure: Regenerate.
 485
 486 2010-01-02  Doug Evans  <dje@sebabeach.org>
 487
 488         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 489         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 490         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 491         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 492         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 493         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 494
 495 2010-01-01  Doug Evans  <dje@sebabeach.org>
 496
 497         * cris/mloop.in: Fix copyright year update snafu.
 498
 499 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 500
 501         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 502         * common/common.m4: Use AM_ZLIB to check for zlib support.
 503         * ppc/configure.ac: Likewise.
 504         * arm/configure, avr/configure, common/configure, cr16/configure,
 505         cris/configure, d10v/configure, erc32/configure, frv/configure,
 506         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 507         m32r/configure, m68hc11/configure, mcore/configure,
 508         microblaze/configure, mips/configure, mn10300/configure,
 509         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 510         v850/configure: Regenerate.
 511
 512 2009-11-24  DJ Delorie  <dj@redhat.com>
 513
 514         * rx: New directory.
 515         * configure.ac: Add entry for Renesas RX.
 516         * configure: Regenerate.
 517
 518 2009-11-22  Doug Evans  <dje@sebabeach.org>
 519
 520         * cris/cpuall.h: Regenerate.
 521         * cris/cpuv10.h: Regenerate.
 522         * cris/cpuv32.h: Regenerate.
 523         * cris/decodev10.c: Regenerate.
 524         * cris/decodev10.h: Regenerate.
 525         * cris/decodev32.c: Regenerate.
 526         * cris/decodev32.h: Regenerate.
 527
 528 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 529
 530         * avr/interp.c (sim_write): Allow byte access.
 531         (sim_read): Ditto.
 532
 533 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 534
 535         * avr/interp.c (sim_load): Clear memory before loading.
 536
 537 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 538
 539         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 540
 541 2009-10-23  Doug Evans  <dje@sebabeach.org>
 542
 543         * cris/arch.c: Regenerate.
 544         * cris/arch.h: Regenerate.
 545         * cris/cpuall.h: Regenerate.
 546         * cris/cpuv10.c: Regenerate.
 547         * cris/cpuv10.h: Regenerate.
 548         * cris/cpuv32.c: Regenerate.
 549         * cris/cpuv32.h: Regenerate.
 550         * cris/cris-desc.c: Regenerate.
 551         * cris/cris-desc.h: Regenerate.
 552         * cris/cris-opc.h: Regenerate.
 553         * cris/decodev10.c: Regenerate.
 554         * cris/decodev10.h: Regenerate.
 555         * cris/decodev32.c: Regenerate.
 556         * cris/decodev32.h: Regenerate.
 557         * cris/modelv10.c: Regenerate.
 558         * cris/modelv32.c: Regenerate.
 559         * cris/semcrisv10f-switch.c: Regenerate.
 560         * cris/semcrisv32f-switch.c: Regenerate.
 561
 562 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 563
 564         * avr/interp.c (sim_stop): Return 1.
 565
 566 2009-10-16  Doug Evans  <dje@sebabeach.org>
 567
 568         * MAINTAINERS: Add myself as m32r maintainer.
 569
 570 2009-10-15  Michael Egaer  <eager@eagercon.com>
 571
 572         * MAINTAINERS: Add self as MicroBlaze maintainer.
 573
 574 2009-10-14  Ben Elliston  <bje@gnu.org>
 575
 576         * MAINTAINERS (common): Move myself to "past maintainers" section.
 577
 578 2009-10-06  Michael Eager  <eager@eagercon.com>
 579
 580         * microblaze/interp.c: Add include microblaze-dis.h.
 581
 582 2009-09-23  Michael Eager  <eager@eagercon.com>
 583
 584         * configure: Add microblaze-*.* (not regenerated).
 585         * configure.ac: Likewise.
 586         * microblaze/config.in: New.
 587         * microblaze/configure: Generate.
 588         * microblaze/configure.ac: New.
 589         * microblaze/interp.c: New.
 590         * microblaze/Makefile.in: New.
 591         * microblaze/microblaze.h: New.
 592         * microblaze/microblaze.isa: New.
 593         * microblaze/sim-main.h: New.
 594         * microblaze/sysdep.h: New.
 595
 596 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 597
 598         * avr/config.in: Regenerate.
 599         * avr/configure: Likewise.
 600         * configure: Likewise.
 601         * cris/config.in: Likewise.
 602         * cris/configure: Likewise.
 603
 604         * configure.ac: m4_include toplevel config/override.m4.
 605         * configure: Regenerate.
 606         * avr/configure: Regenerate.
 607         * cris/configure: Regenerate.
 608
 609 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 610
 611         * Makefile.in (datarootdir): New variable.
 612
 613 2009-05-18  Jon Beniston <jon@beniston.com>
 614
 615         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 616         * configure.ac: Add lm32 target.
 617         * lm32: New directory.
 618
 619 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 620
 621         * MAINTAINERS: Orphan ppc.
 622
 623 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 624
 625         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 626         m32c_signal_to_target.  Change signal return values from SIGILL,
 627         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 628         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 629
 630 2009-04-30  Anthony Green  <green@moxielogic.com>
 631
 632         * MAINTAINERS: Add myself for the moxie port.
 633         * moxie: New directory.
 634         * configure.ac: Add entry for moxie.
 635         * configure: Regenerate.
 636
 637 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 638
 639         * avr: New directory.
 640         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 641         * avr/config.in: New file, generated by autoheader.
 642         * avr/configure: New file generated by autoconf.
 643         * configure.ac: Add avr.
 644         * configure: Regenerated.
 645
 646 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 647
 648         * Makefile.in: Add dummy install-pdf, html, and
 649         install-html targets.
 650
 651 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 652
 653         * cris/sim-if.c: Include errno.h.
 654         (cris_start_address, cris_program_offset): New variables.
 655         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 656         enums.
 657         (cris_options): New options --cris-program-offset and
 658         --cris-start-address.
 659         (cris_option_handler): Handle new options.
 660         (cris_program_offset_write, cris_set_section_offset_iterator)
 661         (cris_offset_sections, cris_offset_sections): New functions.
 662         (sim_load): Use cris_program_offset_write as function argument to
 663         cris_load_elf_file, not sim_write.
 664         (struct offsetinfo): New struct.
 665         (cris_handle_interpreter): Fix typo in comment.
 666         (sim_open): Call cris_offset_sections as soon as the bfd of the
 667         infile is available.  Gate bfd validity checks on abfd non-NULL.
 668         (sim_create_inferior): Let cris_start_address when != -1 override
 669         other start-address choices.
 670
 671 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 672
 673         * cris/traps.c (abort): Define to call sim_io_error.
 674         (create_map): Make -1 imply a non-fixed address, not 0.  All
 675         callers changed.  Only prefer the next higher unmapped address if
 676         the last mapped address is no less than 0x40000000.  Check that
 677         the address to be mapped is not already mapped.  Update head
 678         comment.
 679         (unmap_pages): Don't call abort when recursive call fails, just
 680         note and return an error if a page in the range couldn't be unmapped.
 681         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 682         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 683         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 684         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 685         don't abort on page not being mapped.  Handle non-anon filemap
 686         with length padded to pagesize.
 687
 688 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 689
 690         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 691         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 692         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 693         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 694         (TARGET_AT_CLKTCK): Remove redundant macros.
 695         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 696         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 697         callers.
 698         (sim_open): Also pass AT_SECURE.
 699
 700         * cris/sim-main.h (struct _sim_cpu): New member
 701         set_target_thread_data.
 702         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 703         * cris/crisv10f.c: Ditto.
 704         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 705         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 706         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 707         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 708         case.
 709
 710         * cris/traps.c (TARGET_SYS_exit_group): Define.
 711         (cris_break_13_handler): Handle it like the exit for the last
 712         thread.
 713
 714         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 715         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 716         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 717         2.6.27.  Set machine field to the BFD printable name of the
 718         machine.
 719
 720         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 721         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 722         TARGET_MAP_DENYWRITE.
 723
 724         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 725         (TARGET_X_OK, TARGET_F_OK): Define.
 726         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 727
 728         * cris/semcrisv32f-switch.c: Regenerate.
 729
 730 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 731
 732         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 733         just a short CRIS-specific notice.  Tweak the wording for a
 734         failing architecture test.
 735
 736         * cris/traps.c (TARGET_SYS_writev): New macro.
 737         (is_mapped_only, cris_dump_map): New functions.
 738         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 739         and prot combinations and a non-zero page-offset.  If
 740         TARGET_MAP_FIXED, unmap pages before mapping them.
 741         <case TARGET_SYS_mprotect>: When checking, allow any length
 742         argument.  Don't actually do anything.
 743         <case TARGET_SYS_writev>: New case.
 744
 745         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 746         * cris/sim-if.c: Include elf-bfd.h.
 747         (struct progbounds): New members end_loadmem, start_nonloadmem.
 748         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 749         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 750         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 751         static.  Update head comment.  Set new struct progbounds members.
 752         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 753         variables.
 754         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 755         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 756         functions.
 757         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 758         handling to use auxv_entries.  Improve error message and checking
 759         for invalid programs.  Use new variable abfd for the program
 760         instead of for each access reaching into sd to get it.
 761         (sim_create_inferior): If non-zero, use interp_start_addr instead
 762         of the program start address.
 763         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 764         stale comment.  Always specify little-endian.
 765
 766 2008-07-29  Nick Clifton  <nickc@redhat.com>
 767
 768         * common/genmloop.sh: Add new parameter: -shell to specify the
 769         command interpreter to use to run the input file.  This is
 770         necessary because otherwise SHELL is taken from the user's
 771         environment, and not from the makefile that invoked this script
 772         and the user might not be running an sh-like shell.
 773         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 774         * fr30/Makefile.in: Likewise.
 775         * frv/Makefile.in: Likewise.
 776         * i960/Makefile.in: Likewise.
 777         * iq2000/Makefile.in: Likewise.
 778         * m32r/Makefile.in: Likewise.
 779
 780         * frv/mloop.in: Add missing start of line comment marker.
 781
 782 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 783
 784         * cris/configure: Regenerate to track ../common/common.m4 changes.
 785         * cris/config.in: Ditto.
 786
 787 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 788             Daniel Jacobowitz  <dan@codesourcery.com>
 789             Joseph Myers  <joseph@codesourcery.com>
 790
 791         * cris/configure: Regenerate.
 792
 793 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 794
 795         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 796
 797 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 798
 799         * MAINTAINERS: Add myself as maintainer of cr16 port.
 800
 801 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 802
 803         Add simulator for National cr16 processor.
 804         * cr16: New directory.
 805         * configure.ac: Add entry for National cr16.
 806         * configure: Regenerate.
 807
 808 2008-02-05  DJ Delorie  <dj@redhat.com>
 809
 810         * configure.ac (v850): V850 now has a testsuite.
 811         * configure (v850): Likewise.
 812
 813 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 814
 815         Updated copyright notices for most files.
 816
 817 2007-12-19  DJ Delorie  <dj@redhat.com>
 818
 819         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 820         cut_point.
 821
 822 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 823
 824         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 825         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 826         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 827         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 828         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 829         cris/semcrisv32f-switch.c: Regenerate.
 830
 831 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 832
 833         Switch the license of all files explicitly copyright the FSF
 834         to GPLv3.
 835
 836 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 837
 838         * Makefile.in: Add dummy "pdf" target.
 839
 840 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 841
 842         * cris/traps.c (dump_statistics): Change format for cycle numbers
 843         to %llu and cast parameters to unsigned long long.
 844
 845 2007-02-16  Thiemo Seufer  <ths@mips.com>
 846
 847         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 848
 849 2007-01-28  Manuel Lauss  <slauss@resi.at>
 850
 851         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 852         (sh-*-*): Change to sh*-*-*.
 853         * configure: Regenerated.
 854
 855 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 856
 857         Updated copyright notices for most files.
 858
 859 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 860
 861         * Makefile.in (autoconf-common autoheader-common): Only run
 862         autoheader on subdirs with a file config.in.
 863
 864         * configure.ac (common): Make the default "yes" for all targets
 865         with sim subdirs.
 866         * configure: Regenerate.
 867
 868         * Makefile.in (autoconf-common autoheader-common): In documented
 869         usage, say SHELL=/bin/sh.
 870         (.PHONY): Add autoheader-common.
 871
 872         * MAINTAINERS: Add self as authorized committer for *.
 873
 874 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 875             Hans-Peter Nilsson  <hp@axis.com>
 876
 877         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 878         (cris_unknown_syscall_action): Declare.
 879         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 880         (cris_options): Add cris-unknown-syscall option.
 881         (cris_option_handler): Correct comment about and error message for
 882         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 883         * cris/traps.c: Include stdarg.h
 884         (cris_unknown_syscall): New function.
 885         (cris_break_13_handler): Instead of sim_io_eprintf and
 886         sim_engine_halt, call cris_unknown_syscall to handle more or less
 887         unknown syscalls.  Adjust code as necessary to handle return
 888         value.
 889
 890 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 891
 892         * MAINTAINERS: Add Dave Brolley for sh64.
 893
 894 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 895
 896         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 897         (cris_pipe_empty): Correct initialization of "remaining".  Only
 898         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 899         are written.
 900
 901 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 902
 903         * cris/configure.ac: Check for limits.h and sys/param.h.
 904         * cris/configure, cris/config.in: Rebuild.
 905         * cris/traps.c (SIM_PATHMAX): New macro.
 906         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 907
 908 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 909
 910         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 911         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 912         * configure: Regenerated.
 913
 914 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 915
 916         * cris/configure: Regenerated.
 917
 918 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 919
 920         * cris/configure: Regenerated.
 921
 922 2006-05-05  Andreas Schwab  <schwab@suse.de>
 923
 924         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 925         * configure: Regenerate.
 926
 927         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 928         (CC_FOR_BUILD): Don't override.
 929         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 930
 931 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 932
 933         * MAINTAINERS: Add an "Authorized committers" section, and list
 934         DJ Delorie for v850.
 935
 936 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 937
 938         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 939
 940 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 941
 942         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 943         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 944         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 945         (all): Depend on rvdummy$(EXEEXT).
 946         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 947         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 948         default off.
 949         * cris/configure: Regenerate.
 950         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 951         (enum cris_interrupt_type, crisv10deliver_interrupt)
 952         (crisv32deliver_interrupt: New declarations.
 953         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 954         sim_events_tickn and set state-events member work_pending when it's
 955         time for the next event.
 956         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 957         interrupt-delivery function.
 958         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 959         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 960         * cris/devices.c: Include hw-device.h.
 961         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 962         (device_io_write_buffer): Only perform 0x900000xx-functions if
 963         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 964         call hw_io_write_buffer.  Add return 0 last in function.
 965         * cris/sim-if.c (cris_have_900000xxif): Now global.
 966         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 967         Force "-model" option, effectively.
 968         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 969         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 970
 971 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 972
 973         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 974         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 975         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 976
 977 2006-03-13  DJ Delorie  <dj@redhat.com>
 978
 979         * MAINTAINERS: Add self as m32c sim maintainer.
 980
 981 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 982
 983         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 984         mapping.
 985         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 986
 987 2006-01-23  Jim Blandy  <jimb@redhat.com>
 988
 989         Add simulator for Renesas M32C and M16C.
 990
 991         * m32c: New directory.
 992         * configure.ac: Add entry for Renesas M32C.
 993         * configure: Regenerate.
 994
 995 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 996
 997         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 998         cycle count for the current insn.
 999
1000 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
1001
1002         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
1003         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
1004         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
1005         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
1006
1007 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
1008
1009         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1010         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1011         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1012         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1013         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1014         cris/semcrisv32f-switch.c: Regenerate.
1015
1016 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
1017
1018         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1019         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1020         TARGET_O_WRONLY.
1021         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1022         F_GETFL on fd 0, 1 and 2.
1023
1024 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1025
1026         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1027         last_open_fd, last_open_flags.
1028         * cris/traps.c: Don't include targ-vals.h.
1029         (TARGET_O_ACCMODE): Define.
1030         (cris_break_13_handler): Set new _sim_cpu members.
1031         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1032         Rearrange code as switch.  Emit "unimplemented" abort for
1033         unimplemented fcntl calls.
1034
1035         * cris/traps.c (TARGET_SYS_stat): Define.
1036         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1037         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1038
1039 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1040
1041         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1042         low 32 bits are used after an unsigned long cast.
1043
1044 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1045
1046         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1047
1048 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1049
1050         * MAINTAINERS: Update my mail address, move myself to the
1051         "Past maintainers" section.
1052
1053 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1054
1055         * configure.ac: Add igen to v850 build.
1056         * configure: Regenerate.
1057
1058 2005-04-29  Paul Brook  <paul@codesourcery.com>
1059
1060         * common/callback.c (PIPE_BUF): Provide default definition.
1061         (os_lstat): Use stat if lstat is not available on the host.
1062         (os_ftruncate): Return EINVAL if not available on the host.
1063         (os_truncate): Ditto.
1064         * common/configure.ac: Check for lstat, truncate and ftruncate.
1065         * common/configure: Regenerate.
1066         * common/config.in: Regenerate.
1067
1068 2005-04-27  Paul Brook  <paul@codesourcery.com>
1069
1070         * common/Make-common.in: Add $(EXEEXT) to "run".
1071
1072 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1073
1074         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1075         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1076         implemented.  In call to create_map, pad length argument to 8k.
1077
1078 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1079
1080         * configure.ac: Add explicit sh64 case.
1081         * configure: Regenerate.
1082
1083 2005-03-30  Paul Brook  <paul@codesourcery.com>
1084
1085         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1086
1087 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1088
1089         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1090         include cgen-ops.h in decodev10.c and decodev32.c.
1091         * cris/sim-main.h: Don't include cgen-ops.h here.
1092         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1093         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1094         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1095         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1096         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1097         cris/semcrisv32f-switch.c: Regenerate.
1098
1099         * cris/traps.c (cris_break_13_handler) <case
1100         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1101         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1102
1103 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1104
1105         * cris/configure: Regenerate.
1106
1107 2005-02-28  Jim Blandy  <jimb@redhat.com>
1108
1109         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1110         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1111         Regenerated, after change to common/aclocal.m4.
1112
1113 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1114
1115         * iq2000: New target subdirectory.
1116         * configure.ac: Add iq2000 target.
1117         * configure: Regenerate.
1118
1119 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1120
1121         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1122         (realclean, install): Fail if subdir make failed.
1123
1124 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1125
1126         * cris: New directory, simulator for Axis Communications CRIS
1127         including CRIS v32, CGEN-based.
1128         * configure.ac: Add corresponding configury.
1129         * configure: Regenerate.
1130
1131 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1132
1133         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1134         common directory.  Remove sparc*-*-* from list.
1135
1136 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1137
1138         * Makefile.in (autoconf-common autoheader-common): Add --force to
1139         autoconf and autoheader.
1140         (autoconf-common autoheader-common)
1141         (autoconf-install autoheader-install): Check for configure.ac, not
1142         configure.in.
1143         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1144         * configure: Re-generate.
1145
1146 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1147
1148         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1149         correctly calls AC_CONFIG_SUBDIRS.
1150         * configure: Re-generate.
1151
1152 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1153
1154         * i960, h8500: Delete directory.
1155
1156 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1157
1158         * d30v, fr30, mn10200, z8k: Delete directory.
1159
1160 2004-03-10  Ben Elliston  <bje@gnu.org>
1161
1162         * MAINTAINERS: Update my mail address.
1163
1164 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1165
1166         * configure.in (mips*-*-*): Configure in testsuite.
1167         * configure: Regenerate.
1168
1169 2003-10-08  Dave Brolley  <brolley@redhat.com>
1170
1171         * configure.in: Move frv handling to alphabetically correct placement.
1172
1173 2003-09-03  Andreas Schwab  <schwab@suse.de>
1174
1175         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1176
1177 2003-08-29  Dave Brolley  <brolley@redhat.com>
1178
1179         * MAINTAINERS: Add myself as maintainer of the FRV port.
1180
1181 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1182             Dave Brolley  <brolley@redhat.com>
1183
1184         * frv/: New directory, simulator for the Fujitsu FRV.
1185         * configure.in: Add frv configury.
1186         * configure: Regenerate.
1187
1188 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1189
1190         * MAINTAINERS: Update my mail address.
1191
1192 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1193
1194         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1195         maintenance.  List igen and sh maintainers.  Mention that target
1196         and global maintainers pick up the slack.
1197
1198 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1199
1200         * configure.in: Add testsuite to extra_subdirs for sh.
1201         * configure: Regenerate.
1202
1203 2003-01-23  Nick Clifton  <nickc@redhat.com>
1204
1205         * Add sh2e support:
1206
1207 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1208
1209         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1210
1211 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1212
1213         * MAINTAINERS: Update my email address.
1214
1215 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1216
1217         * w65/: Delete directory.
1218
1219 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1220
1221         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1222         * configure: Re-generate.
1223
1224 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1225
1226         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1227         * configure: Re-generate.
1228
1229 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1230
1231         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1232         id, date and host to be overriden by NAME, ID, DATE and HOST
1233         respectfully.  Use ISO dates.
1234
1235 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1236
1237         * Makefile.in (ChangeLog): New makefile variable.
1238         * README-HACKING: Mention the ChangeLog makefile variable.
1239
1240 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1241
1242         * tic80/: Delete directory.
1243
1244 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1245
1246         * MAINTAINERS: Update my email address.
1247
1248 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1249
1250         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1251
1252 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1253
1254         * MAINTAINERS: Record self as a co-maintainer of just common/.
1255
1256 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1257
1258         * MAINTAINERS: Point to GDB files describing overall maintaince
1259         and check-in procedures.
1260
1261 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1262
1263         * MAINTAINERS: Add myself for ARM portions.
1264
1265 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1266
1267         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1268         * configure: Re-generate.
1269
1270 2001-02-16  Ben Elliston  <bje@redhat.com>
1271
1272         * MAINTAINERS: Add myself for common portions.
1273
1274 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1275
1276         * MAINTAINERS: Added self and Andrew for the mips sim.
1277
1278 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1279
1280         * MAINTAINERS: Added self and Andrew for the ppc sim.
1281
1282 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1283
1284         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1285         * m68hc11: New directory.
1286         * configure.in: Add.
1287         * configure: Regenerate.
1288
1289 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1290
1291         * tic80: New directory.
1292         * configure.in: Add configury.
1293         * configure: Regenerate.
1294
1295 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1296
1297         * configure.in (extra_subdirs): Add testsuite to strongarm
1298         directories.
1299         * configure: Regenerate.
1300
1301 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1302
1303         * MAINTAINERS: New file.  Blank.
1304
1305 1999-11-18  Ben Elliston  <bje@cygnus.com>
1306
1307         * configure.in: Require autoconf 2.13 and remove obsolete
1308         invocation of AC_C_CROSS.
1309         * configure: Regenerate.
1310
1311 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1312
1313         * configure.in: Configure the testsuite directory for thumb.
1314         * configure: Regenerate.
1315
1316 1999-07-16  Ben Elliston  <bje@cygnus.com>
1317
1318         * configure.in: Configure the testsuite directory for arm.
1319         * configure: Regenerate.
1320
1321 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1322
1323         * configure.in: Add support for MCore target.
1324         * configure: Regenerate.
1325
1326 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1327
1328         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1329         RUNTEST instead of commenting out, fixes portability problem.
1330
1331 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1332
1333         * configure.in: Add support for StrongARM target.
1334         * configure: Regenerate.
1335
1336 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1337
1338         * configure.in: Require autoconf 2.12.1 or higher.
1339
1340 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1341
1342         * configure.in (i960-*-*): Add.
1343         * configure: Rebuild.
1344
1345 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1346
1347         * configure.in: Added case for fr30-*-*.
1348         * configure: Regenerated.
1349
1350 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1351
1352         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1353         to allow successful operation on Windows.
1354
1355 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1356
1357         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1358         check can be invoked recursively.
1359
1360 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1361
1362         * configure.in: Build simulator on sparclite and sparc86x targets.
1363         * configure: Regenerate.
1364
1365 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1366
1367         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1368         to autoconf and autoheader.
1369
1370 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1371
1372         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1373         ../common' to autoconf and autoheader.  Unconditionally run
1374         autoconf in every subdir.
1375         (autoconf-changelog autoheader-changelog): Unconditionally run
1376         commands in every subdir.
1377         (autoconf-install autoheader-install): Likewise.
1378
1379 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1380
1381         * Makefile.in:  Get SHELL from configure.
1382         * (FLAGS_TO_PASS):  Pass down SHELL.
1383         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1384         NT native builds.
1385
1386 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1387
1388         * configure.in (extra_subdirs): Enable igen for mn10300.
1389         * configure: Re-generate.
1390
1391 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1392
1393         * configure.in (extra_subdirs): Add support for thumb target.
1394
1395         * configure (extra_subdirs): Add support for thumb target.
1396
1397 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1398
1399         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1400         target.
1401         * configure: Regenerate.
1402
1403 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1404
1405         * configure.in (extra_subdirs): v850ea needs igen.
1406         * configure: Re-generate.
1407
1408 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1409
1410         * configure.in (testdir): When a testsuite directory, add that to
1411         the list of confdirs.
1412
1413 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1414
1415         * configure.in (extra_subdirs): Enable igen ready for V850.
1416
1417 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1418
1419         * configure.in (w65-*-*, only_if_enabled): Set.
1420         * configure: Re-generate.
1421
1422 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1423
1424         * configure.in (sparc*-*-*, only_if_enabled): Set
1425         only_if_enabled=yes.  Check only_if_enabled before enabling a
1426         simulator.
1427         * configure: Regenerate.
1428
1429 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1430
1431         * configure.in (extra_subdirs): Add v850e target.
1432
1433 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1434
1435         * configure.in (extra_subdirs): Add v850ea target.
1436
1437 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1438
1439         * configure.in (sparc*-*-*): Don't build erc32.
1440         * configure: Regenerate.
1441
1442 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1443
1444         * configure.in (m32r-*-*): New target.
1445         * configure: Regenerate.
1446
1447         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1448
1449 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1450
1451         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1452         thought that .NOEXPORT was the default target.
1453
1454 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1455
1456         * Makefile.in (clean mostlyclean): Restore targets accidentally
1457         deleted in earlier change.
1458
1459 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1460
1461         * Makefile.in (autoheader-common, autoheader-changelog,
1462         autoheader-install): Perform autoheader in addition to autoconf.
1463
1464 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1465
1466         * Makefile.in (autoconf-install): New target.
1467         (autoconf-changelog): Try different way to obtain user name.
1468
1469 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1470
1471         * Makefile.in (autoconf-changelog): New target, update
1472         ChangeLog for all subdirectories - normally used after
1473         autoconf-common target.
1474
1475 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1476
1477         * configure.in (extra_subdirs): Include testsuite for d30v.
1478         * configure: Regenerate.
1479
1480         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1481         ../gdb/Makefile.in
1482         (check): New rules - drive the testsuite.
1483
1484 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1485
1486         * configure.in: Add mn10200 configure lines accidentally
1487         removed.
1488         * configure: Regenerated.
1489
1490 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1491
1492         * configure.in (extra_subdirs): Generalize common sub directory
1493         into a list.
1494         (extra_subdirs): For d30v add igen to the list to be built.
1495
1496 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1497
1498         * configure.in (d30v): New target.
1499         * configure: Regenerated.
1500
1501 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1502
1503         * configure.in: Don't require GCC to build the mn10200
1504         simulator anymore.
1505         * configure: Rebuilt.
1506
1507 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1508
1509         * configure.in: Don't configure any subdirs if no simulator
1510         is being built.  Don't use erc32 for sparc64.
1511         * configure: Regenerated.
1512
1513 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1514
1515         * Makefile.in (autoconf-common): New target.
1516         * configure.in: Do configure common.
1517         * configure: Regenerated.
1518
1519 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1520
1521         * configure configure.in:  Don't configure common anymore.  Files
1522         from common are now built in the individual simualtor directories.
1523         This fixes problems with the WinGDB build procedure.
1524
1525 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1526
1527         * configure: Enable the mn10200 simulator.
1528
1529 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1530
1531         * configure.in (configdirs): Add common.
1532         * configure: Regenerated.
1533
1534 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1535
1536         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1537         system V based targets.
1538         * configure: Regenerate.
1539
1540 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1541
1542         * configure.in (--enable-sim-powerpc): Delete.
1543         (--enable-sim): Add.
1544         * configure: Regenerated.
1545
1546 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1547
1548         * configure.in: Only build the V850 simulator if
1549         we are using gcc.
1550         * configure: Rebuild.
1551
1552 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1553
1554         * configure.in: Do build erc32 for DOS and Windows hosts.
1555         * configure: Rebuild.
1556
1557 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1558
1559         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1560         be inherited from the parent.  Remove INSTALL_XFORM and
1561         INSTALL_XFORM1.  Make INSTALL be set from configure.
1562
1563 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1564
1565         * configure.in: Only build the MIPS simulator if we are using
1566         gcc.
1567         * configure: Rebuild.
1568
1569 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1570
1571         * configure.in (v850-*-*): Added V850 simulator.
1572
1573 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1574
1575         * configure.in (d10v-*-*): Added D10V simulator.
1576
1577 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1578
1579         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1580         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1581         (docdir): Removed.
1582         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1583         (AC_PROG_INSTALL): Added.
1584         * configure: Rebuilt.
1585
1586 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1587
1588         * configure.in: Only configure erc32 if using gcc.
1589         * configure: Rebuild.
1590
1591 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1592
1593         * configure.in (sim_target): Build PowerPC simulator for powerpc
1594         System V.4, Solaris, and Elf targets.
1595         * configure: Regenerate with autoconf 2.10.
1596
1597 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1598
1599         * configure.in: Only built erc32 simulator on Unix hosts as it
1600         uses pseudo ttys.
1601         * configure: Regenerated with autoconf 2.8.
1602
1603 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1604
1605         * erc32: Sparc simulator from the ESA.
1606
1607 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1608
1609         From: Miles Bader  <miles@gnu.ai.mit.edu>
1610         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1611         * configure: Regenerate using autoconf.
1612
1613 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1614
1615         * Makefile.in (install): Fix typo.
1616
1617 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1618
1619         * configure: Regenerate with autoconf 2.7.
1620
1621         * Makefile.in (all): Simplify.
1622         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1623         as in the all target.
1624         (distclean, maintainer-clean, realclean): Likewise.
1625         (install): Likewise.
1626
1627 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1628
1629         * Makefile.in (all): Remove extra '\' char from shell script.
1630
1631 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1632
1633         * Makefile.in (all): Avoid a for loop with zero elements, even if
1634         the loop will not be executed because of an if statement.
1635
1636 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1637
1638         * Makefile.in (install): Add missing semicolon in "fi \".
1639
1640 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1641
1642         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1643         defaults from configure.
1644
1645         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1646         configure defaults.
1647         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1648         if either --enable-sim-powerpc is used, or the host compiler is
1649         GCC.
1650
1651 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1652
1653         * configure.in (mips*-*-*): Added "mips" simulator target.
1654         * configure: Re-generated.
1655
1656 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1657
1658         * Makefile.in (BISON): Remove macro.
1659         (FLAGS_TO_PASS): Remove BISON.
1660
1661 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1662
1663         * configure.in:  Explicitly `exit 0' for broken shells.
1664         * configure:  Rebuilt.
1665
1666 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1667
1668         * common/run.c (main): Initialize the callbacks.
1669
1670 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1671
1672         * Makefile.in (maintainer-clean): New synonym for realclean.
1673
1674 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1675
1676         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1677         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1678
1679 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1680
1681         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1682         <cagney@highland.com.au>.
1683         * configure: Regnerate from configure.in.
1684
1685 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1686
1687         * Update all FSF addresses except those in COPYING* files.
1688
1689 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1690
1691         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1692         submakes either default or passed in value.
1693
1694 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1695
1696         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1697           install): Changed targets so that they descend all
1698           subdirectories in $(SUBDIRS).
1699           (*-all, *-clean, *-install): Removed targets.
1700
1701         * configure.in: Don't bother with target makefile fragments, they
1702           are no longer needed.
1703         * configure: regenerated.
1704
1705         * Makefile.in, configure.in: converted to autoconf.
1706         * configure: New file, generated with autconf 2.4.
1707
1708 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1709
1710         * Makefile.in: Support ARM.
1711         * configure.in: Ditto.
1712
1713 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1714
1715         * Makefile.in: Support W65.
1716         * configure.in: Ditto.
1717
1718 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1719
1720         * Makefile.in: Add TAGS target.
1721
1722 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1723
1724         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1725           install-h8300, clean-h8300, all-h8500, install-h8500,
1726           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1727           recursion lines.
1728
1729 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1730
1731         * Makefile.in: remove endian.h trace from h8500
1732
1733 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1734
1735         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1736
1737 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1738
1739         * Makefile.in: make all of the all-* target (except all-nothing)
1740         depend on endian.h, so that if we're not building a simulator, we
1741         don't built endian
1742
1743 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1744
1745         * Makefile.in (check, installcheck): Added dummy targets.
1746
1747 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1748
1749         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1750         explicitly make it, since some makes apparently don't work with
1751         VPATH and .c to executable rules (SunOS make for example).
1752
1753 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1754
1755         * Makefile.in (endian): Add explicit rule for broken makes.
1756
1757 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1758
1759         * Makefile.in (info, install-info): New targets.
1760         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1761         level Makefile.
1762
1763 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1764
1765         * Makefile.in (endian.h): build endian.h via a temporary file so
1766           that we don't leave an incomplete file lying around on
1767           interrupted builds.
1768           (clean): remove endian, e.h, and endian.h.
1769
1770 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1771
1772         * Makefile.in, configure.in: if target isn't supported, build a
1773         harmless makefile.
1774
1775