sim/ChangeLog

   1 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * README-HACKING: Add more sections.
   4
   5 2010-02-11  Doug Evans  <dje@sebabeach.org>
   6
   7         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
   8         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
   9         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  10         * cris/semcrisv32f-switch.c: Regenerate.
  11
  12 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  13
  14         * avr/configure: Regenerate.
  15         * cris/configure: Regenerate.
  16         * microblaze/configure: Regenerate.
  17
  18 2010-01-02  Doug Evans  <dje@sebabeach.org>
  19
  20         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
  21         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
  22         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
  23         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
  24         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  25         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
  26
  27 2010-01-01  Doug Evans  <dje@sebabeach.org>
  28
  29         * cris/mloop.in: Fix copyright year update snafu.
  30
  31 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
  32
  33         * common/aclocal.m4: Add include of ../../config/zlib.m4.
  34         * common/common.m4: Use AM_ZLIB to check for zlib support.
  35         * ppc/configure.ac: Likewise.
  36         * arm/configure, avr/configure, common/configure, cr16/configure,
  37         cris/configure, d10v/configure, erc32/configure, frv/configure,
  38         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
  39         m32r/configure, m68hc11/configure, mcore/configure,
  40         microblaze/configure, mips/configure, mn10300/configure,
  41         moxie/configure, ppc/configure, sh/configure, sh64/configure,
  42         v850/configure: Regenerate.
  43
  44 2009-11-24  DJ Delorie  <dj@redhat.com>
  45
  46         * rx: New directory.
  47         * configure.ac: Add entry for Renesas RX.
  48         * configure: Regenerate.
  49
  50 2009-11-22  Doug Evans  <dje@sebabeach.org>
  51
  52         * cris/cpuall.h: Regenerate.
  53         * cris/cpuv10.h: Regenerate.
  54         * cris/cpuv32.h: Regenerate.
  55         * cris/decodev10.c: Regenerate.
  56         * cris/decodev10.h: Regenerate.
  57         * cris/decodev32.c: Regenerate.
  58         * cris/decodev32.h: Regenerate.
  59
  60 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  61
  62         * avr/interp.c (sim_write): Allow byte access.
  63         (sim_read): Ditto.
  64
  65 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  66
  67         * avr/interp.c (sim_load): Clear memory before loading.
  68
  69 2009-11-09  Tristan Gingold  <gingold@adacore.com>
  70
  71         * avr/interp.c (sim_resume): Fix typo for OP_ret.
  72
  73 2009-10-23  Doug Evans  <dje@sebabeach.org>
  74
  75         * cris/arch.c: Regenerate.
  76         * cris/arch.h: Regenerate.
  77         * cris/cpuall.h: Regenerate.
  78         * cris/cpuv10.c: Regenerate.
  79         * cris/cpuv10.h: Regenerate.
  80         * cris/cpuv32.c: Regenerate.
  81         * cris/cpuv32.h: Regenerate.
  82         * cris/cris-desc.c: Regenerate.
  83         * cris/cris-desc.h: Regenerate.
  84         * cris/cris-opc.h: Regenerate.
  85         * cris/decodev10.c: Regenerate.
  86         * cris/decodev10.h: Regenerate.
  87         * cris/decodev32.c: Regenerate.
  88         * cris/decodev32.h: Regenerate.
  89         * cris/modelv10.c: Regenerate.
  90         * cris/modelv32.c: Regenerate.
  91         * cris/semcrisv10f-switch.c: Regenerate.
  92         * cris/semcrisv32f-switch.c: Regenerate.
  93
  94 2009-10-22  Tristan Gingold  <gingold@adacore.com>
  95
  96         * avr/interp.c (sim_stop): Return 1.
  97
  98 2009-10-16  Doug Evans  <dje@sebabeach.org>
  99
 100         * MAINTAINERS: Add myself as m32r maintainer.
 101
 102 2009-10-15  Michael Egaer  <eager@eagercon.com>
 103
 104         * MAINTAINERS: Add self as MicroBlaze maintainer.
 105
 106 2009-10-14  Ben Elliston  <bje@gnu.org>
 107
 108         * MAINTAINERS (common): Move myself to "past maintainers" section.
 109
 110 2009-10-06  Michael Eager  <eager@eagercon.com>
 111
 112         * microblaze/interp.c: Add include microblaze-dis.h.
 113
 114 2009-09-23  Michael Eager  <eager@eagercon.com>
 115
 116         * configure: Add microblaze-*.* (not regenerated).
 117         * configure.ac: Likewise.
 118         * microblaze/config.in: New.
 119         * microblaze/configure: Generate.
 120         * microblaze/configure.ac: New.
 121         * microblaze/interp.c: New.
 122         * microblaze/Makefile.in: New.
 123         * microblaze/microblaze.h: New.
 124         * microblaze/microblaze.isa: New.
 125         * microblaze/sim-main.h: New.
 126         * microblaze/sysdep.h: New.
 127
 128 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 129
 130         * avr/config.in: Regenerate.
 131         * avr/configure: Likewise.
 132         * configure: Likewise.
 133         * cris/config.in: Likewise.
 134         * cris/configure: Likewise.
 135
 136         * configure.ac: m4_include toplevel config/override.m4.
 137         * configure: Regenerate.
 138         * avr/configure: Regenerate.
 139         * cris/configure: Regenerate.
 140
 141 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 142
 143         * Makefile.in (datarootdir): New variable.
 144
 145 2009-05-18  Jon Beniston <jon@beniston.com>
 146
 147         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 148         * configure.ac: Add lm32 target.
 149         * lm32: New directory.
 150
 151 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 152
 153         * MAINTAINERS: Orphan ppc.
 154
 155 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 156
 157         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 158         m32c_signal_to_target.  Change signal return values from SIGILL,
 159         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 160         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 161
 162 2009-04-30  Anthony Green  <green@moxielogic.com>
 163
 164         * MAINTAINERS: Add myself for the moxie port.
 165         * moxie: New directory.
 166         * configure.ac: Add entry for moxie.
 167         * configure: Regenerate.
 168
 169 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 170
 171         * avr: New directory.
 172         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 173         * avr/config.in: New file, generated by autoheader.
 174         * avr/configure: New file generated by autoconf.
 175         * configure.ac: Add avr.
 176         * configure: Regenerated.
 177
 178 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 179
 180         * Makefile.in: Add dummy install-pdf, html, and
 181         install-html targets.
 182
 183 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 184
 185         * cris/sim-if.c: Include errno.h.
 186         (cris_start_address, cris_program_offset): New variables.
 187         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 188         enums.
 189         (cris_options): New options --cris-program-offset and
 190         --cris-start-address.
 191         (cris_option_handler): Handle new options.
 192         (cris_program_offset_write, cris_set_section_offset_iterator)
 193         (cris_offset_sections, cris_offset_sections): New functions.
 194         (sim_load): Use cris_program_offset_write as function argument to
 195         cris_load_elf_file, not sim_write.
 196         (struct offsetinfo): New struct.
 197         (cris_handle_interpreter): Fix typo in comment.
 198         (sim_open): Call cris_offset_sections as soon as the bfd of the
 199         infile is available.  Gate bfd validity checks on abfd non-NULL.
 200         (sim_create_inferior): Let cris_start_address when != -1 override
 201         other start-address choices.
 202
 203 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 204
 205         * cris/traps.c (abort): Define to call sim_io_error.
 206         (create_map): Make -1 imply a non-fixed address, not 0.  All
 207         callers changed.  Only prefer the next higher unmapped address if
 208         the last mapped address is no less than 0x40000000.  Check that
 209         the address to be mapped is not already mapped.  Update head
 210         comment.
 211         (unmap_pages): Don't call abort when recursive call fails, just
 212         note and return an error if a page in the range couldn't be unmapped.
 213         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 214         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 215         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 216         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 217         don't abort on page not being mapped.  Handle non-anon filemap
 218         with length padded to pagesize.
 219
 220 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 221
 222         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 223         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 224         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 225         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 226         (TARGET_AT_CLKTCK): Remove redundant macros.
 227         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 228         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 229         callers.
 230         (sim_open): Also pass AT_SECURE.
 231
 232         * cris/sim-main.h (struct _sim_cpu): New member
 233         set_target_thread_data.
 234         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 235         * cris/crisv10f.c: Ditto.
 236         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 237         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 238         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 239         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 240         case.
 241
 242         * cris/traps.c (TARGET_SYS_exit_group): Define.
 243         (cris_break_13_handler): Handle it like the exit for the last
 244         thread.
 245
 246         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 247         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 248         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 249         2.6.27.  Set machine field to the BFD printable name of the
 250         machine.
 251
 252         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 253         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 254         TARGET_MAP_DENYWRITE.
 255
 256         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 257         (TARGET_X_OK, TARGET_F_OK): Define.
 258         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 259
 260         * cris/semcrisv32f-switch.c: Regenerate.
 261
 262 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 263
 264         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 265         just a short CRIS-specific notice.  Tweak the wording for a
 266         failing architecture test.
 267
 268         * cris/traps.c (TARGET_SYS_writev): New macro.
 269         (is_mapped_only, cris_dump_map): New functions.
 270         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 271         and prot combinations and a non-zero page-offset.  If
 272         TARGET_MAP_FIXED, unmap pages before mapping them.
 273         <case TARGET_SYS_mprotect>: When checking, allow any length
 274         argument.  Don't actually do anything.
 275         <case TARGET_SYS_writev>: New case.
 276
 277         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 278         * cris/sim-if.c: Include elf-bfd.h.
 279         (struct progbounds): New members end_loadmem, start_nonloadmem.
 280         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 281         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 282         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 283         static.  Update head comment.  Set new struct progbounds members.
 284         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 285         variables.
 286         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 287         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 288         functions.
 289         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 290         handling to use auxv_entries.  Improve error message and checking
 291         for invalid programs.  Use new variable abfd for the program
 292         instead of for each access reaching into sd to get it.
 293         (sim_create_inferior): If non-zero, use interp_start_addr instead
 294         of the program start address.
 295         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 296         stale comment.  Always specify little-endian.
 297
 298 2008-07-29  Nick Clifton  <nickc@redhat.com>
 299
 300         * common/genmloop.sh: Add new parameter: -shell to specify the
 301         command interpreter to use to run the input file.  This is
 302         necessary because otherwise SHELL is taken from the user's
 303         environment, and not from the makefile that invoked this script
 304         and the user might not be running an sh-like shell.
 305         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 306         * fr30/Makefile.in: Likewise.
 307         * frv/Makefile.in: Likewise.
 308         * i960/Makefile.in: Likewise.
 309         * iq2000/Makefile.in: Likewise.
 310         * m32r/Makefile.in: Likewise.
 311
 312         * frv/mloop.in: Add missing start of line comment marker.
 313
 314 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 315
 316         * cris/configure: Regenerate to track ../common/common.m4 changes.
 317         * cris/config.in: Ditto.
 318
 319 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 320             Daniel Jacobowitz  <dan@codesourcery.com>
 321             Joseph Myers  <joseph@codesourcery.com>
 322
 323         * cris/configure: Regenerate.
 324
 325 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 326
 327         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 328
 329 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 330
 331         * MAINTAINERS: Add myself as maintainer of cr16 port.
 332
 333 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 334
 335         Add simulator for National cr16 processor.
 336         * cr16: New directory.
 337         * configure.ac: Add entry for National cr16.
 338         * configure: Regenerate.
 339
 340 2008-02-05  DJ Delorie  <dj@redhat.com>
 341
 342         * configure.ac (v850): V850 now has a testsuite.
 343         * configure (v850): Likewise.
 344
 345 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 346
 347         Updated copyright notices for most files.
 348
 349 2007-12-19  DJ Delorie  <dj@redhat.com>
 350
 351         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 352         cut_point.
 353
 354 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 355
 356         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 357         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 358         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 359         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 360         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 361         cris/semcrisv32f-switch.c: Regenerate.
 362
 363 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 364
 365         Switch the license of all files explicitly copyright the FSF
 366         to GPLv3.
 367
 368 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 369
 370         * Makefile.in: Add dummy "pdf" target.
 371
 372 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 373
 374         * cris/traps.c (dump_statistics): Change format for cycle numbers
 375         to %llu and cast parameters to unsigned long long.
 376
 377 2007-02-16  Thiemo Seufer  <ths@mips.com>
 378
 379         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 380
 381 2007-01-28  Manuel Lauss  <slauss@resi.at>
 382
 383         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 384         (sh-*-*): Change to sh*-*-*.
 385         * configure: Regenerated.
 386
 387 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 388
 389         Updated copyright notices for most files.
 390
 391 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 392
 393         * Makefile.in (autoconf-common autoheader-common): Only run
 394         autoheader on subdirs with a file config.in.
 395
 396         * configure.ac (common): Make the default "yes" for all targets
 397         with sim subdirs.
 398         * configure: Regenerate.
 399
 400         * Makefile.in (autoconf-common autoheader-common): In documented
 401         usage, say SHELL=/bin/sh.
 402         (.PHONY): Add autoheader-common.
 403
 404         * MAINTAINERS: Add self as authorized committer for *.
 405
 406 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 407             Hans-Peter Nilsson  <hp@axis.com>
 408
 409         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 410         (cris_unknown_syscall_action): Declare.
 411         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 412         (cris_options): Add cris-unknown-syscall option.
 413         (cris_option_handler): Correct comment about and error message for
 414         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 415         * cris/traps.c: Include stdarg.h
 416         (cris_unknown_syscall): New function.
 417         (cris_break_13_handler): Instead of sim_io_eprintf and
 418         sim_engine_halt, call cris_unknown_syscall to handle more or less
 419         unknown syscalls.  Adjust code as necessary to handle return
 420         value.
 421
 422 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 423
 424         * MAINTAINERS: Add Dave Brolley for sh64.
 425
 426 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 427
 428         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 429         (cris_pipe_empty): Correct initialization of "remaining".  Only
 430         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 431         are written.
 432
 433 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 434
 435         * cris/configure.ac: Check for limits.h and sys/param.h.
 436         * cris/configure, cris/config.in: Rebuild.
 437         * cris/traps.c (SIM_PATHMAX): New macro.
 438         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 439
 440 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 441
 442         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 443         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 444         * configure: Regenerated.
 445
 446 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 447
 448         * cris/configure: Regenerated.
 449
 450 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 451
 452         * cris/configure: Regenerated.
 453
 454 2006-05-05  Andreas Schwab  <schwab@suse.de>
 455
 456         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 457         * configure: Regenerate.
 458
 459         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 460         (CC_FOR_BUILD): Don't override.
 461         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 462
 463 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 464
 465         * MAINTAINERS: Add an "Authorized committers" section, and list
 466         DJ Delorie for v850.
 467
 468 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 469
 470         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 471
 472 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 473
 474         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 475         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 476         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 477         (all): Depend on rvdummy$(EXEEXT).
 478         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 479         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 480         default off.
 481         * cris/configure: Regenerate.
 482         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 483         (enum cris_interrupt_type, crisv10deliver_interrupt)
 484         (crisv32deliver_interrupt: New declarations.
 485         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 486         sim_events_tickn and set state-events member work_pending when it's
 487         time for the next event.
 488         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 489         interrupt-delivery function.
 490         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 491         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 492         * cris/devices.c: Include hw-device.h.
 493         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 494         (device_io_write_buffer): Only perform 0x900000xx-functions if
 495         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 496         call hw_io_write_buffer.  Add return 0 last in function.
 497         * cris/sim-if.c (cris_have_900000xxif): Now global.
 498         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 499         Force "-model" option, effectively.
 500         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 501         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 502
 503 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 504
 505         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 506         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 507         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 508
 509 2006-03-13  DJ Delorie  <dj@redhat.com>
 510
 511         * MAINTAINERS: Add self as m32c sim maintainer.
 512
 513 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 514
 515         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 516         mapping.
 517         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 518
 519 2006-01-23  Jim Blandy  <jimb@redhat.com>
 520
 521         Add simulator for Renesas M32C and M16C.
 522
 523         * m32c: New directory.
 524         * configure.ac: Add entry for Renesas M32C.
 525         * configure: Regenerate.
 526
 527 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 528
 529         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 530         cycle count for the current insn.
 531
 532 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 533
 534         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 535         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 536         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 537         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 538
 539 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 540
 541         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 542         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 543         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 544         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 545         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 546         cris/semcrisv32f-switch.c: Regenerate.
 547
 548 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 549
 550         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 551         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 552         TARGET_O_WRONLY.
 553         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 554         F_GETFL on fd 0, 1 and 2.
 555
 556 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 557
 558         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 559         last_open_fd, last_open_flags.
 560         * cris/traps.c: Don't include targ-vals.h.
 561         (TARGET_O_ACCMODE): Define.
 562         (cris_break_13_handler): Set new _sim_cpu members.
 563         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 564         Rearrange code as switch.  Emit "unimplemented" abort for
 565         unimplemented fcntl calls.
 566
 567         * cris/traps.c (TARGET_SYS_stat): Define.
 568         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 569         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 570
 571 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 572
 573         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 574         low 32 bits are used after an unsigned long cast.
 575
 576 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 577
 578         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 579
 580 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 581
 582         * MAINTAINERS: Update my mail address, move myself to the
 583         "Past maintainers" section.
 584
 585 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 586
 587         * configure.ac: Add igen to v850 build.
 588         * configure: Regenerate.
 589
 590 2005-04-29  Paul Brook  <paul@codesourcery.com>
 591
 592         * common/callback.c (PIPE_BUF): Provide default definition.
 593         (os_lstat): Use stat if lstat is not available on the host.
 594         (os_ftruncate): Return EINVAL if not available on the host.
 595         (os_truncate): Ditto.
 596         * common/configure.ac: Check for lstat, truncate and ftruncate.
 597         * common/configure: Regenerate.
 598         * common/config.in: Regenerate.
 599
 600 2005-04-27  Paul Brook  <paul@codesourcery.com>
 601
 602         * common/Make-common.in: Add $(EXEEXT) to "run".
 603
 604 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 605
 606         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 607         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 608         implemented.  In call to create_map, pad length argument to 8k.
 609
 610 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 611
 612         * configure.ac: Add explicit sh64 case.
 613         * configure: Regenerate.
 614
 615 2005-03-30  Paul Brook  <paul@codesourcery.com>
 616
 617         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 618
 619 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 620
 621         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 622         include cgen-ops.h in decodev10.c and decodev32.c.
 623         * cris/sim-main.h: Don't include cgen-ops.h here.
 624         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 625         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 626         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 627         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 628         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 629         cris/semcrisv32f-switch.c: Regenerate.
 630
 631         * cris/traps.c (cris_break_13_handler) <case
 632         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 633         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 634
 635 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 636
 637         * cris/configure: Regenerate.
 638
 639 2005-02-28  Jim Blandy  <jimb@redhat.com>
 640
 641         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 642         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 643         Regenerated, after change to common/aclocal.m4.
 644
 645 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 646
 647         * iq2000: New target subdirectory.
 648         * configure.ac: Add iq2000 target.
 649         * configure: Regenerate.
 650
 651 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 652
 653         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 654         (realclean, install): Fail if subdir make failed.
 655
 656 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 657
 658         * cris: New directory, simulator for Axis Communications CRIS
 659         including CRIS v32, CGEN-based.
 660         * configure.ac: Add corresponding configury.
 661         * configure: Regenerate.
 662
 663 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 664
 665         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 666         common directory.  Remove sparc*-*-* from list.
 667
 668 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 669
 670         * Makefile.in (autoconf-common autoheader-common): Add --force to
 671         autoconf and autoheader.
 672         (autoconf-common autoheader-common)
 673         (autoconf-install autoheader-install): Check for configure.ac, not
 674         configure.in.
 675         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 676         * configure: Re-generate.
 677
 678 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 679
 680         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 681         correctly calls AC_CONFIG_SUBDIRS.
 682         * configure: Re-generate.
 683
 684 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 685
 686         * i960, h8500: Delete directory.
 687
 688 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 689
 690         * d30v, fr30, mn10200, z8k: Delete directory.
 691
 692 2004-03-10  Ben Elliston  <bje@gnu.org>
 693
 694         * MAINTAINERS: Update my mail address.
 695
 696 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 697
 698         * configure.in (mips*-*-*): Configure in testsuite.
 699         * configure: Regenerate.
 700
 701 2003-10-08  Dave Brolley  <brolley@redhat.com>
 702
 703         * configure.in: Move frv handling to alphabetically correct placement.
 704
 705 2003-09-03  Andreas Schwab  <schwab@suse.de>
 706
 707         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 708
 709 2003-08-29  Dave Brolley  <brolley@redhat.com>
 710
 711         * MAINTAINERS: Add myself as maintainer of the FRV port.
 712
 713 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 714             Dave Brolley  <brolley@redhat.com>
 715
 716         * frv/: New directory, simulator for the Fujitsu FRV.
 717         * configure.in: Add frv configury.
 718         * configure: Regenerate.
 719
 720 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 721
 722         * MAINTAINERS: Update my mail address.
 723
 724 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 725
 726         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 727         maintenance.  List igen and sh maintainers.  Mention that target
 728         and global maintainers pick up the slack.
 729
 730 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 731
 732         * configure.in: Add testsuite to extra_subdirs for sh.
 733         * configure: Regenerate.
 734
 735 2003-01-23  Nick Clifton  <nickc@redhat.com>
 736
 737         * Add sh2e support:
 738
 739 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 740
 741         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 742
 743 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 744
 745         * MAINTAINERS: Update my email address.
 746
 747 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 748
 749         * w65/: Delete directory.
 750
 751 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 752
 753         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 754         * configure: Re-generate.
 755
 756 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 757
 758         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 759         * configure: Re-generate.
 760
 761 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 762
 763         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 764         id, date and host to be overriden by NAME, ID, DATE and HOST
 765         respectfully.  Use ISO dates.
 766
 767 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 768
 769         * Makefile.in (ChangeLog): New makefile variable.
 770         * README-HACKING: Mention the ChangeLog makefile variable.
 771
 772 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 773
 774         * tic80/: Delete directory.
 775
 776 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 777
 778         * MAINTAINERS: Update my email address.
 779
 780 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 781
 782         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 783
 784 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 785
 786         * MAINTAINERS: Record self as a co-maintainer of just common/.
 787
 788 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 789
 790         * MAINTAINERS: Point to GDB files describing overall maintaince
 791         and check-in procedures.
 792
 793 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 794
 795         * MAINTAINERS: Add myself for ARM portions.
 796
 797 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 798
 799         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 800         * configure: Re-generate.
 801
 802 2001-02-16  Ben Elliston  <bje@redhat.com>
 803
 804         * MAINTAINERS: Add myself for common portions.
 805
 806 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 807
 808         * MAINTAINERS: Added self and Andrew for the mips sim.
 809
 810 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 811
 812         * MAINTAINERS: Added self and Andrew for the ppc sim.
 813
 814 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 815
 816         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 817         * m68hc11: New directory.
 818         * configure.in: Add.
 819         * configure: Regenerate.
 820
 821 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 822
 823         * tic80: New directory.
 824         * configure.in: Add configury.
 825         * configure: Regenerate.
 826
 827 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 828
 829         * configure.in (extra_subdirs): Add testsuite to strongarm
 830         directories.
 831         * configure: Regenerate.
 832
 833 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 834
 835         * MAINTAINERS: New file.  Blank.
 836
 837 1999-11-18  Ben Elliston  <bje@cygnus.com>
 838
 839         * configure.in: Require autoconf 2.13 and remove obsolete
 840         invocation of AC_C_CROSS.
 841         * configure: Regenerate.
 842
 843 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 844
 845         * configure.in: Configure the testsuite directory for thumb.
 846         * configure: Regenerate.
 847
 848 1999-07-16  Ben Elliston  <bje@cygnus.com>
 849
 850         * configure.in: Configure the testsuite directory for arm.
 851         * configure: Regenerate.
 852
 853 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 854
 855         * configure.in: Add support for MCore target.
 856         * configure: Regenerate.
 857
 858 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 859
 860         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 861         RUNTEST instead of commenting out, fixes portability problem.
 862
 863 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 864
 865         * configure.in: Add support for StrongARM target.
 866         * configure: Regenerate.
 867
 868 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 869
 870         * configure.in: Require autoconf 2.12.1 or higher.
 871
 872 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 873
 874         * configure.in (i960-*-*): Add.
 875         * configure: Rebuild.
 876
 877 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 878
 879         * configure.in: Added case for fr30-*-*.
 880         * configure: Regenerated.
 881
 882 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 883
 884         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 885         to allow successful operation on Windows.
 886
 887 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 888
 889         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 890         check can be invoked recursively.
 891
 892 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 893
 894         * configure.in: Build simulator on sparclite and sparc86x targets.
 895         * configure: Regenerate.
 896
 897 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 898
 899         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 900         to autoconf and autoheader.
 901
 902 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 903
 904         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 905         ../common' to autoconf and autoheader.  Unconditionally run
 906         autoconf in every subdir.
 907         (autoconf-changelog autoheader-changelog): Unconditionally run
 908         commands in every subdir.
 909         (autoconf-install autoheader-install): Likewise.
 910
 911 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 912
 913         * Makefile.in:  Get SHELL from configure.
 914         * (FLAGS_TO_PASS):  Pass down SHELL.
 915         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 916         NT native builds.
 917
 918 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 919
 920         * configure.in (extra_subdirs): Enable igen for mn10300.
 921         * configure: Re-generate.
 922
 923 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 924
 925         * configure.in (extra_subdirs): Add support for thumb target.
 926
 927         * configure (extra_subdirs): Add support for thumb target.
 928
 929 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 930
 931         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 932         target.
 933         * configure: Regenerate.
 934
 935 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 936
 937         * configure.in (extra_subdirs): v850ea needs igen.
 938         * configure: Re-generate.
 939
 940 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 941
 942         * configure.in (testdir): When a testsuite directory, add that to
 943         the list of confdirs.
 944
 945 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 946
 947         * configure.in (extra_subdirs): Enable igen ready for V850.
 948
 949 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 950
 951         * configure.in (w65-*-*, only_if_enabled): Set.
 952         * configure: Re-generate.
 953
 954 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 955
 956         * configure.in (sparc*-*-*, only_if_enabled): Set
 957         only_if_enabled=yes.  Check only_if_enabled before enabling a
 958         simulator.
 959         * configure: Regenerate.
 960
 961 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 962
 963         * configure.in (extra_subdirs): Add v850e target.
 964
 965 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 966
 967         * configure.in (extra_subdirs): Add v850ea target.
 968
 969 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 970
 971         * configure.in (sparc*-*-*): Don't build erc32.
 972         * configure: Regenerate.
 973
 974 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 975
 976         * configure.in (m32r-*-*): New target.
 977         * configure: Regenerate.
 978
 979         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 980
 981 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 982
 983         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 984         thought that .NOEXPORT was the default target.
 985
 986 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 987
 988         * Makefile.in (clean mostlyclean): Restore targets accidentally
 989         deleted in earlier change.
 990
 991 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 992
 993         * Makefile.in (autoheader-common, autoheader-changelog,
 994         autoheader-install): Perform autoheader in addition to autoconf.
 995
 996 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
 997
 998         * Makefile.in (autoconf-install): New target.
 999         (autoconf-changelog): Try different way to obtain user name.
1000
1001 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1002
1003         * Makefile.in (autoconf-changelog): New target, update
1004         ChangeLog for all subdirectories - normally used after
1005         autoconf-common target.
1006
1007 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1008
1009         * configure.in (extra_subdirs): Include testsuite for d30v.
1010         * configure: Regenerate.
1011
1012         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1013         ../gdb/Makefile.in
1014         (check): New rules - drive the testsuite.
1015
1016 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1017
1018         * configure.in: Add mn10200 configure lines accidentally
1019         removed.
1020         * configure: Regenerated.
1021
1022 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1023
1024         * configure.in (extra_subdirs): Generalize common sub directory
1025         into a list.
1026         (extra_subdirs): For d30v add igen to the list to be built.
1027
1028 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1029
1030         * configure.in (d30v): New target.
1031         * configure: Regenerated.
1032
1033 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1034
1035         * configure.in: Don't require GCC to build the mn10200
1036         simulator anymore.
1037         * configure: Rebuilt.
1038
1039 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1040
1041         * configure.in: Don't configure any subdirs if no simulator
1042         is being built.  Don't use erc32 for sparc64.
1043         * configure: Regenerated.
1044
1045 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1046
1047         * Makefile.in (autoconf-common): New target.
1048         * configure.in: Do configure common.
1049         * configure: Regenerated.
1050
1051 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1052
1053         * configure configure.in:  Don't configure common anymore.  Files
1054         from common are now built in the individual simualtor directories.
1055         This fixes problems with the WinGDB build procedure.
1056
1057 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1058
1059         * configure: Enable the mn10200 simulator.
1060
1061 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1062
1063         * configure.in (configdirs): Add common.
1064         * configure: Regenerated.
1065
1066 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1067
1068         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1069         system V based targets.
1070         * configure: Regenerate.
1071
1072 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1073
1074         * configure.in (--enable-sim-powerpc): Delete.
1075         (--enable-sim): Add.
1076         * configure: Regenerated.
1077
1078 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1079
1080         * configure.in: Only build the V850 simulator if
1081         we are using gcc.
1082         * configure: Rebuild.
1083
1084 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1085
1086         * configure.in: Do build erc32 for DOS and Windows hosts.
1087         * configure: Rebuild.
1088
1089 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1090
1091         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1092         be inherited from the parent.  Remove INSTALL_XFORM and
1093         INSTALL_XFORM1.  Make INSTALL be set from configure.
1094
1095 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1096
1097         * configure.in: Only build the MIPS simulator if we are using
1098         gcc.
1099         * configure: Rebuild.
1100
1101 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1102
1103         * configure.in (v850-*-*): Added V850 simulator.
1104
1105 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1106
1107         * configure.in (d10v-*-*): Added D10V simulator.
1108
1109 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1110
1111         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1112         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1113         (docdir): Removed.
1114         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1115         (AC_PROG_INSTALL): Added.
1116         * configure: Rebuilt.
1117
1118 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1119
1120         * configure.in: Only configure erc32 if using gcc.
1121         * configure: Rebuild.
1122
1123 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1124
1125         * configure.in (sim_target): Build PowerPC simulator for powerpc
1126         System V.4, Solaris, and Elf targets.
1127         * configure: Regenerate with autoconf 2.10.
1128
1129 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1130
1131         * configure.in: Only built erc32 simulator on Unix hosts as it
1132         uses pseudo ttys.
1133         * configure: Regenerated with autoconf 2.8.
1134
1135 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1136
1137         * erc32: Sparc simulator from the ESA.
1138
1139 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1140
1141         From: Miles Bader  <miles@gnu.ai.mit.edu>
1142         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1143         * configure: Regenerate using autoconf.
1144
1145 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1146
1147         * Makefile.in (install): Fix typo.
1148
1149 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1150
1151         * configure: Regenerate with autoconf 2.7.
1152
1153         * Makefile.in (all): Simplify.
1154         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1155         as in the all target.
1156         (distclean, maintainer-clean, realclean): Likewise.
1157         (install): Likewise.
1158
1159 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1160
1161         * Makefile.in (all): Remove extra '\' char from shell script.
1162
1163 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1164
1165         * Makefile.in (all): Avoid a for loop with zero elements, even if
1166         the loop will not be executed because of an if statement.
1167
1168 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1169
1170         * Makefile.in (install): Add missing semicolon in "fi \".
1171
1172 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1173
1174         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1175         defaults from configure.
1176
1177         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1178         configure defaults.
1179         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1180         if either --enable-sim-powerpc is used, or the host compiler is
1181         GCC.
1182
1183 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1184
1185         * configure.in (mips*-*-*): Added "mips" simulator target.
1186         * configure: Re-generated.
1187
1188 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1189
1190         * Makefile.in (BISON): Remove macro.
1191         (FLAGS_TO_PASS): Remove BISON.
1192
1193 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1194
1195         * configure.in:  Explicitly `exit 0' for broken shells.
1196         * configure:  Rebuilt.
1197
1198 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1199
1200         * common/run.c (main): Initialize the callbacks.
1201
1202 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1203
1204         * Makefile.in (maintainer-clean): New synonym for realclean.
1205
1206 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1207
1208         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1209         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1210
1211 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1212
1213         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1214         <cagney@highland.com.au>.
1215         * configure: Regnerate from configure.in.
1216
1217 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1218
1219         * Update all FSF addresses except those in COPYING* files.
1220
1221 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1222
1223         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1224         submakes either default or passed in value.
1225
1226 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1227
1228         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1229           install): Changed targets so that they descend all
1230           subdirectories in $(SUBDIRS).
1231           (*-all, *-clean, *-install): Removed targets.
1232
1233         * configure.in: Don't bother with target makefile fragments, they
1234           are no longer needed.
1235         * configure: regenerated.
1236
1237         * Makefile.in, configure.in: converted to autoconf.
1238         * configure: New file, generated with autconf 2.4.
1239
1240 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1241
1242         * Makefile.in: Support ARM.
1243         * configure.in: Ditto.
1244
1245 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1246
1247         * Makefile.in: Support W65.
1248         * configure.in: Ditto.
1249
1250 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1251
1252         * Makefile.in: Add TAGS target.
1253
1254 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1255
1256         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1257           install-h8300, clean-h8300, all-h8500, install-h8500,
1258           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1259           recursion lines.
1260
1261 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1262
1263         * Makefile.in: remove endian.h trace from h8500
1264
1265 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1266
1267         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1268
1269 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1270
1271         * Makefile.in: make all of the all-* target (except all-nothing)
1272         depend on endian.h, so that if we're not building a simulator, we
1273         don't built endian
1274
1275 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1276
1277         * Makefile.in (check, installcheck): Added dummy targets.
1278
1279 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1280
1281         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1282         explicitly make it, since some makes apparently don't work with
1283         VPATH and .c to executable rules (SunOS make for example).
1284
1285 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1286
1287         * Makefile.in (endian): Add explicit rule for broken makes.
1288
1289 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1290
1291         * Makefile.in (info, install-info): New targets.
1292         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1293         level Makefile.
1294
1295 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1296
1297         * Makefile.in (endian.h): build endian.h via a temporary file so
1298           that we don't leave an incomplete file lying around on
1299           interrupted builds.
1300           (clean): remove endian, e.h, and endian.h.
1301
1302 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1303
1304         * Makefile.in, configure.in: if target isn't supported, build a
1305         harmless makefile.
1306
1307