sim/ChangeLog

   1 2013-03-15  Steve Ellcey  <sellcey@mips.com>
   2
   3         * arm/wrapper.c (sim_complete_command): Make char arguments const.
   4         * avr/interp.c (sim_complete_command): Ditto.
   5         * common/sim-options.c (sim_complete_command): Ditto.
   6         * cr16/interp.c (sim_complete_command): Ditto.
   7         * erc32/interf.c (sim_complete_command): Ditto.
   8         * m32c/gdb-if.c (sim_complete_command): Ditto.
   9         * microblaze/interp.c (sim_complete_command): Ditto.
  10         * ppc/sim_calls.c (sim_complete_command): Ditto.
  11         * rl78/gdb-if.c (sim_complete_command): Ditto.
  12         * rx/gdb-if.c (sim_complete_command): Ditto.
  13         * sh/interp.c (sim_complete_command): Ditto.
  14
  15 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
  16
  17         Update year range in copyright notice of all files.
  18
  19 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  20
  21         Update old contact info in GPL license notices.
  22
  23 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  24
  25         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
  26
  27 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
  28
  29         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
  30         condition.
  31         * common/acinclude.m4: Define lt_cv_dlopen_libs.
  32         * arm/configure: Regenerate.
  33         * avr/configure: Regenerate.
  34         * bfin/configure: Regenerate.
  35         * common/configure: Regenerate.
  36         * cr16/configure: Regenerate.
  37         * cris/configure: Regenerate.
  38         * d10v/configure: Regenerate.
  39         * erc32/configure: Regenerate.
  40         * frv/configure: Regenerate.
  41         * h8300/configure: Regenerate.
  42         * igen/configure: Regenerate.
  43         * iq2000/configure: Regenerate.
  44         * lm32/configure: Regenerate.
  45         * m32c/configure: Regenerate.
  46         * m32r/configure: Regenerate.
  47         * m68hc11/configure: Regenerate.
  48         * mcore/configure: Regenerate.
  49         * microblaze/configure: Regenerate.
  50         * mips/configure: Regenerate.
  51         * mn10300/configure: Regenerate.
  52         * moxie/configure: Regenerate.
  53         * ppc/configure: Regenerate.
  54         * rl78/configure: Regenerate.
  55         * rx/configure: Regenerate.
  56         * sh/configure: Regenerate.
  57         * sh64/configure: Regenerate.
  58         * testsuite/configure: Regenerate.
  59         * v850/configure: Regenerate.
  60
  61 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  62
  63         * MAINTAINERS: Update my email address.
  64
  65 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  66
  67         * mips/basic.exp: Add mips*-mti-elf* target.
  68         * configure.ac: Add mips*-mti-elf* target.
  69         * configure: Regenerate.
  70
  71 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  72
  73         * configure: Regenerate.
  74
  75 2012-06-06  Michael Eager  <eager@eagercon.com>
  76
  77         * microblaze/interp.c (config.h): Add #include.
  78
  79 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  80
  81         * MAINTAINERS (Global Maintainers): New section.  Add Mike
  82         Frysinger.
  83
  84 2011-11-28  DJ Delorie  <dj@redhat.com>
  85
  86         * configure.tgt: Add rl78 support.
  87         * configure: Regenerate.
  88         * rl78: New directory.
  89         * MAINTAINERS: Add myself as RL78 maintainer.
  90
  91 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
  92
  93         * MAINTAINERS: Remove Thiemo Seufer.
  94
  95 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  96
  97         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
  98         * configure: Regenerate.
  99
 100 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 101
 102         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 103         handle targets.
 104         * configure: Regenerate.
 105
 106 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 107
 108         * MAINTAINERS: Add bfin entry.
 109         * configure.tgt (bfin-*-*): Handle bfin targets.
 110         * configure: Regenerate.
 111
 112 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * .gitignore: Add /*/hw-config.h.
 115
 116 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * .gitignore: New file.
 119
 120 2010-07-28  DJ Delorie  <dj@redhat.com>
 121
 122         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 123
 124 2010-06-08  Nick Clifton  <nickc@redhat.com>
 125
 126         * reg.c (set_oszc): Use unsigned int for the mask.
 127         (set_szc, set_osz, set_sz): Likewise.
 128
 129 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 130
 131         * configure.ac: Target logic moved out to and included from ...
 132         * configure.tgt: ... this new file.
 133         * configure: Regenerated.
 134
 135 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 136
 137         * README-HACKING: Add more sections.
 138
 139 2010-02-11  Doug Evans  <dje@sebabeach.org>
 140
 141         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 142         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 143         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 144         * cris/semcrisv32f-switch.c: Regenerate.
 145
 146 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 147
 148         * avr/configure: Regenerate.
 149         * cris/configure: Regenerate.
 150         * microblaze/configure: Regenerate.
 151
 152 2010-01-02  Doug Evans  <dje@sebabeach.org>
 153
 154         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 155         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 156         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 157         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 158         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 159         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 160
 161 2010-01-01  Doug Evans  <dje@sebabeach.org>
 162
 163         * cris/mloop.in: Fix copyright year update snafu.
 164
 165 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 166
 167         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 168         * common/common.m4: Use AM_ZLIB to check for zlib support.
 169         * ppc/configure.ac: Likewise.
 170         * arm/configure, avr/configure, common/configure, cr16/configure,
 171         cris/configure, d10v/configure, erc32/configure, frv/configure,
 172         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 173         m32r/configure, m68hc11/configure, mcore/configure,
 174         microblaze/configure, mips/configure, mn10300/configure,
 175         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 176         v850/configure: Regenerate.
 177
 178 2009-11-24  DJ Delorie  <dj@redhat.com>
 179
 180         * rx: New directory.
 181         * configure.ac: Add entry for Renesas RX.
 182         * configure: Regenerate.
 183
 184 2009-11-22  Doug Evans  <dje@sebabeach.org>
 185
 186         * cris/cpuall.h: Regenerate.
 187         * cris/cpuv10.h: Regenerate.
 188         * cris/cpuv32.h: Regenerate.
 189         * cris/decodev10.c: Regenerate.
 190         * cris/decodev10.h: Regenerate.
 191         * cris/decodev32.c: Regenerate.
 192         * cris/decodev32.h: Regenerate.
 193
 194 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 195
 196         * avr/interp.c (sim_write): Allow byte access.
 197         (sim_read): Ditto.
 198
 199 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 200
 201         * avr/interp.c (sim_load): Clear memory before loading.
 202
 203 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 204
 205         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 206
 207 2009-10-23  Doug Evans  <dje@sebabeach.org>
 208
 209         * cris/arch.c: Regenerate.
 210         * cris/arch.h: Regenerate.
 211         * cris/cpuall.h: Regenerate.
 212         * cris/cpuv10.c: Regenerate.
 213         * cris/cpuv10.h: Regenerate.
 214         * cris/cpuv32.c: Regenerate.
 215         * cris/cpuv32.h: Regenerate.
 216         * cris/cris-desc.c: Regenerate.
 217         * cris/cris-desc.h: Regenerate.
 218         * cris/cris-opc.h: Regenerate.
 219         * cris/decodev10.c: Regenerate.
 220         * cris/decodev10.h: Regenerate.
 221         * cris/decodev32.c: Regenerate.
 222         * cris/decodev32.h: Regenerate.
 223         * cris/modelv10.c: Regenerate.
 224         * cris/modelv32.c: Regenerate.
 225         * cris/semcrisv10f-switch.c: Regenerate.
 226         * cris/semcrisv32f-switch.c: Regenerate.
 227
 228 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 229
 230         * avr/interp.c (sim_stop): Return 1.
 231
 232 2009-10-16  Doug Evans  <dje@sebabeach.org>
 233
 234         * MAINTAINERS: Add myself as m32r maintainer.
 235
 236 2009-10-15  Michael Egaer  <eager@eagercon.com>
 237
 238         * MAINTAINERS: Add self as MicroBlaze maintainer.
 239
 240 2009-10-14  Ben Elliston  <bje@gnu.org>
 241
 242         * MAINTAINERS (common): Move myself to "past maintainers" section.
 243
 244 2009-10-06  Michael Eager  <eager@eagercon.com>
 245
 246         * microblaze/interp.c: Add include microblaze-dis.h.
 247
 248 2009-09-23  Michael Eager  <eager@eagercon.com>
 249
 250         * configure: Add microblaze-*.* (not regenerated).
 251         * configure.ac: Likewise.
 252         * microblaze/config.in: New.
 253         * microblaze/configure: Generate.
 254         * microblaze/configure.ac: New.
 255         * microblaze/interp.c: New.
 256         * microblaze/Makefile.in: New.
 257         * microblaze/microblaze.h: New.
 258         * microblaze/microblaze.isa: New.
 259         * microblaze/sim-main.h: New.
 260         * microblaze/sysdep.h: New.
 261
 262 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 263
 264         * avr/config.in: Regenerate.
 265         * avr/configure: Likewise.
 266         * configure: Likewise.
 267         * cris/config.in: Likewise.
 268         * cris/configure: Likewise.
 269
 270         * configure.ac: m4_include toplevel config/override.m4.
 271         * configure: Regenerate.
 272         * avr/configure: Regenerate.
 273         * cris/configure: Regenerate.
 274
 275 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 276
 277         * Makefile.in (datarootdir): New variable.
 278
 279 2009-05-18  Jon Beniston <jon@beniston.com>
 280
 281         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 282         * configure.ac: Add lm32 target.
 283         * lm32: New directory.
 284
 285 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 286
 287         * MAINTAINERS: Orphan ppc.
 288
 289 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 290
 291         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 292         m32c_signal_to_target.  Change signal return values from SIGILL,
 293         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 294         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 295
 296 2009-04-30  Anthony Green  <green@moxielogic.com>
 297
 298         * MAINTAINERS: Add myself for the moxie port.
 299         * moxie: New directory.
 300         * configure.ac: Add entry for moxie.
 301         * configure: Regenerate.
 302
 303 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 304
 305         * avr: New directory.
 306         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 307         * avr/config.in: New file, generated by autoheader.
 308         * avr/configure: New file generated by autoconf.
 309         * configure.ac: Add avr.
 310         * configure: Regenerated.
 311
 312 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 313
 314         * Makefile.in: Add dummy install-pdf, html, and
 315         install-html targets.
 316
 317 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 318
 319         * cris/sim-if.c: Include errno.h.
 320         (cris_start_address, cris_program_offset): New variables.
 321         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 322         enums.
 323         (cris_options): New options --cris-program-offset and
 324         --cris-start-address.
 325         (cris_option_handler): Handle new options.
 326         (cris_program_offset_write, cris_set_section_offset_iterator)
 327         (cris_offset_sections, cris_offset_sections): New functions.
 328         (sim_load): Use cris_program_offset_write as function argument to
 329         cris_load_elf_file, not sim_write.
 330         (struct offsetinfo): New struct.
 331         (cris_handle_interpreter): Fix typo in comment.
 332         (sim_open): Call cris_offset_sections as soon as the bfd of the
 333         infile is available.  Gate bfd validity checks on abfd non-NULL.
 334         (sim_create_inferior): Let cris_start_address when != -1 override
 335         other start-address choices.
 336
 337 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 338
 339         * cris/traps.c (abort): Define to call sim_io_error.
 340         (create_map): Make -1 imply a non-fixed address, not 0.  All
 341         callers changed.  Only prefer the next higher unmapped address if
 342         the last mapped address is no less than 0x40000000.  Check that
 343         the address to be mapped is not already mapped.  Update head
 344         comment.
 345         (unmap_pages): Don't call abort when recursive call fails, just
 346         note and return an error if a page in the range couldn't be unmapped.
 347         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 348         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 349         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 350         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 351         don't abort on page not being mapped.  Handle non-anon filemap
 352         with length padded to pagesize.
 353
 354 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 355
 356         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 357         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 358         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 359         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 360         (TARGET_AT_CLKTCK): Remove redundant macros.
 361         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 362         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 363         callers.
 364         (sim_open): Also pass AT_SECURE.
 365
 366         * cris/sim-main.h (struct _sim_cpu): New member
 367         set_target_thread_data.
 368         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 369         * cris/crisv10f.c: Ditto.
 370         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 371         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 372         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 373         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 374         case.
 375
 376         * cris/traps.c (TARGET_SYS_exit_group): Define.
 377         (cris_break_13_handler): Handle it like the exit for the last
 378         thread.
 379
 380         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 381         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 382         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 383         2.6.27.  Set machine field to the BFD printable name of the
 384         machine.
 385
 386         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 387         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 388         TARGET_MAP_DENYWRITE.
 389
 390         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 391         (TARGET_X_OK, TARGET_F_OK): Define.
 392         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 393
 394         * cris/semcrisv32f-switch.c: Regenerate.
 395
 396 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 397
 398         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 399         just a short CRIS-specific notice.  Tweak the wording for a
 400         failing architecture test.
 401
 402         * cris/traps.c (TARGET_SYS_writev): New macro.
 403         (is_mapped_only, cris_dump_map): New functions.
 404         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 405         and prot combinations and a non-zero page-offset.  If
 406         TARGET_MAP_FIXED, unmap pages before mapping them.
 407         <case TARGET_SYS_mprotect>: When checking, allow any length
 408         argument.  Don't actually do anything.
 409         <case TARGET_SYS_writev>: New case.
 410
 411         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 412         * cris/sim-if.c: Include elf-bfd.h.
 413         (struct progbounds): New members end_loadmem, start_nonloadmem.
 414         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 415         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 416         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 417         static.  Update head comment.  Set new struct progbounds members.
 418         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 419         variables.
 420         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 421         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 422         functions.
 423         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 424         handling to use auxv_entries.  Improve error message and checking
 425         for invalid programs.  Use new variable abfd for the program
 426         instead of for each access reaching into sd to get it.
 427         (sim_create_inferior): If non-zero, use interp_start_addr instead
 428         of the program start address.
 429         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 430         stale comment.  Always specify little-endian.
 431
 432 2008-07-29  Nick Clifton  <nickc@redhat.com>
 433
 434         * common/genmloop.sh: Add new parameter: -shell to specify the
 435         command interpreter to use to run the input file.  This is
 436         necessary because otherwise SHELL is taken from the user's
 437         environment, and not from the makefile that invoked this script
 438         and the user might not be running an sh-like shell.
 439         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 440         * fr30/Makefile.in: Likewise.
 441         * frv/Makefile.in: Likewise.
 442         * i960/Makefile.in: Likewise.
 443         * iq2000/Makefile.in: Likewise.
 444         * m32r/Makefile.in: Likewise.
 445
 446         * frv/mloop.in: Add missing start of line comment marker.
 447
 448 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 449
 450         * cris/configure: Regenerate to track ../common/common.m4 changes.
 451         * cris/config.in: Ditto.
 452
 453 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 454             Daniel Jacobowitz  <dan@codesourcery.com>
 455             Joseph Myers  <joseph@codesourcery.com>
 456
 457         * cris/configure: Regenerate.
 458
 459 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 460
 461         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 462
 463 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 464
 465         * MAINTAINERS: Add myself as maintainer of cr16 port.
 466
 467 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 468
 469         Add simulator for National cr16 processor.
 470         * cr16: New directory.
 471         * configure.ac: Add entry for National cr16.
 472         * configure: Regenerate.
 473
 474 2008-02-05  DJ Delorie  <dj@redhat.com>
 475
 476         * configure.ac (v850): V850 now has a testsuite.
 477         * configure (v850): Likewise.
 478
 479 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 480
 481         Updated copyright notices for most files.
 482
 483 2007-12-19  DJ Delorie  <dj@redhat.com>
 484
 485         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 486         cut_point.
 487
 488 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 489
 490         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 491         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 492         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 493         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 494         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 495         cris/semcrisv32f-switch.c: Regenerate.
 496
 497 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 498
 499         Switch the license of all files explicitly copyright the FSF
 500         to GPLv3.
 501
 502 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 503
 504         * Makefile.in: Add dummy "pdf" target.
 505
 506 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 507
 508         * cris/traps.c (dump_statistics): Change format for cycle numbers
 509         to %llu and cast parameters to unsigned long long.
 510
 511 2007-02-16  Thiemo Seufer  <ths@mips.com>
 512
 513         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 514
 515 2007-01-28  Manuel Lauss  <slauss@resi.at>
 516
 517         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 518         (sh-*-*): Change to sh*-*-*.
 519         * configure: Regenerated.
 520
 521 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 522
 523         Updated copyright notices for most files.
 524
 525 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 526
 527         * Makefile.in (autoconf-common autoheader-common): Only run
 528         autoheader on subdirs with a file config.in.
 529
 530         * configure.ac (common): Make the default "yes" for all targets
 531         with sim subdirs.
 532         * configure: Regenerate.
 533
 534         * Makefile.in (autoconf-common autoheader-common): In documented
 535         usage, say SHELL=/bin/sh.
 536         (.PHONY): Add autoheader-common.
 537
 538         * MAINTAINERS: Add self as authorized committer for *.
 539
 540 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 541             Hans-Peter Nilsson  <hp@axis.com>
 542
 543         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 544         (cris_unknown_syscall_action): Declare.
 545         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 546         (cris_options): Add cris-unknown-syscall option.
 547         (cris_option_handler): Correct comment about and error message for
 548         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 549         * cris/traps.c: Include stdarg.h
 550         (cris_unknown_syscall): New function.
 551         (cris_break_13_handler): Instead of sim_io_eprintf and
 552         sim_engine_halt, call cris_unknown_syscall to handle more or less
 553         unknown syscalls.  Adjust code as necessary to handle return
 554         value.
 555
 556 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 557
 558         * MAINTAINERS: Add Dave Brolley for sh64.
 559
 560 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 561
 562         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 563         (cris_pipe_empty): Correct initialization of "remaining".  Only
 564         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 565         are written.
 566
 567 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 568
 569         * cris/configure.ac: Check for limits.h and sys/param.h.
 570         * cris/configure, cris/config.in: Rebuild.
 571         * cris/traps.c (SIM_PATHMAX): New macro.
 572         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 573
 574 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 575
 576         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 577         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 578         * configure: Regenerated.
 579
 580 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 581
 582         * cris/configure: Regenerated.
 583
 584 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 585
 586         * cris/configure: Regenerated.
 587
 588 2006-05-05  Andreas Schwab  <schwab@suse.de>
 589
 590         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 591         * configure: Regenerate.
 592
 593         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 594         (CC_FOR_BUILD): Don't override.
 595         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 596
 597 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 598
 599         * MAINTAINERS: Add an "Authorized committers" section, and list
 600         DJ Delorie for v850.
 601
 602 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 603
 604         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 605
 606 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 607
 608         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 609         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 610         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 611         (all): Depend on rvdummy$(EXEEXT).
 612         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 613         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 614         default off.
 615         * cris/configure: Regenerate.
 616         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 617         (enum cris_interrupt_type, crisv10deliver_interrupt)
 618         (crisv32deliver_interrupt: New declarations.
 619         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 620         sim_events_tickn and set state-events member work_pending when it's
 621         time for the next event.
 622         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 623         interrupt-delivery function.
 624         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 625         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 626         * cris/devices.c: Include hw-device.h.
 627         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 628         (device_io_write_buffer): Only perform 0x900000xx-functions if
 629         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 630         call hw_io_write_buffer.  Add return 0 last in function.
 631         * cris/sim-if.c (cris_have_900000xxif): Now global.
 632         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 633         Force "-model" option, effectively.
 634         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 635         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 636
 637 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 638
 639         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 640         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 641         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 642
 643 2006-03-13  DJ Delorie  <dj@redhat.com>
 644
 645         * MAINTAINERS: Add self as m32c sim maintainer.
 646
 647 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 648
 649         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 650         mapping.
 651         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 652
 653 2006-01-23  Jim Blandy  <jimb@redhat.com>
 654
 655         Add simulator for Renesas M32C and M16C.
 656
 657         * m32c: New directory.
 658         * configure.ac: Add entry for Renesas M32C.
 659         * configure: Regenerate.
 660
 661 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 662
 663         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 664         cycle count for the current insn.
 665
 666 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 667
 668         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 669         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 670         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 671         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 672
 673 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 674
 675         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 676         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 677         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 678         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 679         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 680         cris/semcrisv32f-switch.c: Regenerate.
 681
 682 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 683
 684         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 685         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 686         TARGET_O_WRONLY.
 687         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 688         F_GETFL on fd 0, 1 and 2.
 689
 690 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 691
 692         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 693         last_open_fd, last_open_flags.
 694         * cris/traps.c: Don't include targ-vals.h.
 695         (TARGET_O_ACCMODE): Define.
 696         (cris_break_13_handler): Set new _sim_cpu members.
 697         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 698         Rearrange code as switch.  Emit "unimplemented" abort for
 699         unimplemented fcntl calls.
 700
 701         * cris/traps.c (TARGET_SYS_stat): Define.
 702         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 703         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 704
 705 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 706
 707         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 708         low 32 bits are used after an unsigned long cast.
 709
 710 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 711
 712         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 713
 714 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 715
 716         * MAINTAINERS: Update my mail address, move myself to the
 717         "Past maintainers" section.
 718
 719 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 720
 721         * configure.ac: Add igen to v850 build.
 722         * configure: Regenerate.
 723
 724 2005-04-29  Paul Brook  <paul@codesourcery.com>
 725
 726         * common/callback.c (PIPE_BUF): Provide default definition.
 727         (os_lstat): Use stat if lstat is not available on the host.
 728         (os_ftruncate): Return EINVAL if not available on the host.
 729         (os_truncate): Ditto.
 730         * common/configure.ac: Check for lstat, truncate and ftruncate.
 731         * common/configure: Regenerate.
 732         * common/config.in: Regenerate.
 733
 734 2005-04-27  Paul Brook  <paul@codesourcery.com>
 735
 736         * common/Make-common.in: Add $(EXEEXT) to "run".
 737
 738 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 739
 740         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 741         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 742         implemented.  In call to create_map, pad length argument to 8k.
 743
 744 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 745
 746         * configure.ac: Add explicit sh64 case.
 747         * configure: Regenerate.
 748
 749 2005-03-30  Paul Brook  <paul@codesourcery.com>
 750
 751         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 752
 753 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 754
 755         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 756         include cgen-ops.h in decodev10.c and decodev32.c.
 757         * cris/sim-main.h: Don't include cgen-ops.h here.
 758         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 759         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 760         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 761         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 762         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 763         cris/semcrisv32f-switch.c: Regenerate.
 764
 765         * cris/traps.c (cris_break_13_handler) <case
 766         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 767         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 768
 769 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 770
 771         * cris/configure: Regenerate.
 772
 773 2005-02-28  Jim Blandy  <jimb@redhat.com>
 774
 775         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 776         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 777         Regenerated, after change to common/aclocal.m4.
 778
 779 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 780
 781         * iq2000: New target subdirectory.
 782         * configure.ac: Add iq2000 target.
 783         * configure: Regenerate.
 784
 785 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 786
 787         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 788         (realclean, install): Fail if subdir make failed.
 789
 790 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 791
 792         * cris: New directory, simulator for Axis Communications CRIS
 793         including CRIS v32, CGEN-based.
 794         * configure.ac: Add corresponding configury.
 795         * configure: Regenerate.
 796
 797 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 798
 799         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 800         common directory.  Remove sparc*-*-* from list.
 801
 802 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 803
 804         * Makefile.in (autoconf-common autoheader-common): Add --force to
 805         autoconf and autoheader.
 806         (autoconf-common autoheader-common)
 807         (autoconf-install autoheader-install): Check for configure.ac, not
 808         configure.in.
 809         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 810         * configure: Re-generate.
 811
 812 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 813
 814         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 815         correctly calls AC_CONFIG_SUBDIRS.
 816         * configure: Re-generate.
 817
 818 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 819
 820         * i960, h8500: Delete directory.
 821
 822 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 823
 824         * d30v, fr30, mn10200, z8k: Delete directory.
 825
 826 2004-03-10  Ben Elliston  <bje@gnu.org>
 827
 828         * MAINTAINERS: Update my mail address.
 829
 830 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 831
 832         * configure.in (mips*-*-*): Configure in testsuite.
 833         * configure: Regenerate.
 834
 835 2003-10-08  Dave Brolley  <brolley@redhat.com>
 836
 837         * configure.in: Move frv handling to alphabetically correct placement.
 838
 839 2003-09-03  Andreas Schwab  <schwab@suse.de>
 840
 841         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 842
 843 2003-08-29  Dave Brolley  <brolley@redhat.com>
 844
 845         * MAINTAINERS: Add myself as maintainer of the FRV port.
 846
 847 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 848             Dave Brolley  <brolley@redhat.com>
 849
 850         * frv/: New directory, simulator for the Fujitsu FRV.
 851         * configure.in: Add frv configury.
 852         * configure: Regenerate.
 853
 854 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 855
 856         * MAINTAINERS: Update my mail address.
 857
 858 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 859
 860         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 861         maintenance.  List igen and sh maintainers.  Mention that target
 862         and global maintainers pick up the slack.
 863
 864 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 865
 866         * configure.in: Add testsuite to extra_subdirs for sh.
 867         * configure: Regenerate.
 868
 869 2003-01-23  Nick Clifton  <nickc@redhat.com>
 870
 871         * Add sh2e support:
 872
 873 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 874
 875         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 876
 877 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 878
 879         * MAINTAINERS: Update my email address.
 880
 881 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 882
 883         * w65/: Delete directory.
 884
 885 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 886
 887         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 888         * configure: Re-generate.
 889
 890 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 891
 892         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 893         * configure: Re-generate.
 894
 895 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 896
 897         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 898         id, date and host to be overriden by NAME, ID, DATE and HOST
 899         respectfully.  Use ISO dates.
 900
 901 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 902
 903         * Makefile.in (ChangeLog): New makefile variable.
 904         * README-HACKING: Mention the ChangeLog makefile variable.
 905
 906 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 907
 908         * tic80/: Delete directory.
 909
 910 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 911
 912         * MAINTAINERS: Update my email address.
 913
 914 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 915
 916         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 917
 918 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 919
 920         * MAINTAINERS: Record self as a co-maintainer of just common/.
 921
 922 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 923
 924         * MAINTAINERS: Point to GDB files describing overall maintaince
 925         and check-in procedures.
 926
 927 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 928
 929         * MAINTAINERS: Add myself for ARM portions.
 930
 931 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 932
 933         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 934         * configure: Re-generate.
 935
 936 2001-02-16  Ben Elliston  <bje@redhat.com>
 937
 938         * MAINTAINERS: Add myself for common portions.
 939
 940 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 941
 942         * MAINTAINERS: Added self and Andrew for the mips sim.
 943
 944 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 945
 946         * MAINTAINERS: Added self and Andrew for the ppc sim.
 947
 948 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 949
 950         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 951         * m68hc11: New directory.
 952         * configure.in: Add.
 953         * configure: Regenerate.
 954
 955 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 956
 957         * tic80: New directory.
 958         * configure.in: Add configury.
 959         * configure: Regenerate.
 960
 961 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 962
 963         * configure.in (extra_subdirs): Add testsuite to strongarm
 964         directories.
 965         * configure: Regenerate.
 966
 967 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 968
 969         * MAINTAINERS: New file.  Blank.
 970
 971 1999-11-18  Ben Elliston  <bje@cygnus.com>
 972
 973         * configure.in: Require autoconf 2.13 and remove obsolete
 974         invocation of AC_C_CROSS.
 975         * configure: Regenerate.
 976
 977 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 978
 979         * configure.in: Configure the testsuite directory for thumb.
 980         * configure: Regenerate.
 981
 982 1999-07-16  Ben Elliston  <bje@cygnus.com>
 983
 984         * configure.in: Configure the testsuite directory for arm.
 985         * configure: Regenerate.
 986
 987 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 988
 989         * configure.in: Add support for MCore target.
 990         * configure: Regenerate.
 991
 992 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 993
 994         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 995         RUNTEST instead of commenting out, fixes portability problem.
 996
 997 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 998
 999         * configure.in: Add support for StrongARM target.
1000         * configure: Regenerate.
1001
1002 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1003
1004         * configure.in: Require autoconf 2.12.1 or higher.
1005
1006 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1007
1008         * configure.in (i960-*-*): Add.
1009         * configure: Rebuild.
1010
1011 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1012
1013         * configure.in: Added case for fr30-*-*.
1014         * configure: Regenerated.
1015
1016 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1017
1018         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1019         to allow successful operation on Windows.
1020
1021 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1022
1023         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1024         check can be invoked recursively.
1025
1026 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1027
1028         * configure.in: Build simulator on sparclite and sparc86x targets.
1029         * configure: Regenerate.
1030
1031 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1032
1033         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1034         to autoconf and autoheader.
1035
1036 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1037
1038         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1039         ../common' to autoconf and autoheader.  Unconditionally run
1040         autoconf in every subdir.
1041         (autoconf-changelog autoheader-changelog): Unconditionally run
1042         commands in every subdir.
1043         (autoconf-install autoheader-install): Likewise.
1044
1045 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1046
1047         * Makefile.in:  Get SHELL from configure.
1048         * (FLAGS_TO_PASS):  Pass down SHELL.
1049         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1050         NT native builds.
1051
1052 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1053
1054         * configure.in (extra_subdirs): Enable igen for mn10300.
1055         * configure: Re-generate.
1056
1057 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1058
1059         * configure.in (extra_subdirs): Add support for thumb target.
1060
1061         * configure (extra_subdirs): Add support for thumb target.
1062
1063 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1064
1065         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1066         target.
1067         * configure: Regenerate.
1068
1069 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1070
1071         * configure.in (extra_subdirs): v850ea needs igen.
1072         * configure: Re-generate.
1073
1074 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1075
1076         * configure.in (testdir): When a testsuite directory, add that to
1077         the list of confdirs.
1078
1079 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1080
1081         * configure.in (extra_subdirs): Enable igen ready for V850.
1082
1083 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1084
1085         * configure.in (w65-*-*, only_if_enabled): Set.
1086         * configure: Re-generate.
1087
1088 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1089
1090         * configure.in (sparc*-*-*, only_if_enabled): Set
1091         only_if_enabled=yes.  Check only_if_enabled before enabling a
1092         simulator.
1093         * configure: Regenerate.
1094
1095 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1096
1097         * configure.in (extra_subdirs): Add v850e target.
1098
1099 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1100
1101         * configure.in (extra_subdirs): Add v850ea target.
1102
1103 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1104
1105         * configure.in (sparc*-*-*): Don't build erc32.
1106         * configure: Regenerate.
1107
1108 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1109
1110         * configure.in (m32r-*-*): New target.
1111         * configure: Regenerate.
1112
1113         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1114
1115 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1116
1117         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1118         thought that .NOEXPORT was the default target.
1119
1120 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1121
1122         * Makefile.in (clean mostlyclean): Restore targets accidentally
1123         deleted in earlier change.
1124
1125 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1126
1127         * Makefile.in (autoheader-common, autoheader-changelog,
1128         autoheader-install): Perform autoheader in addition to autoconf.
1129
1130 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1131
1132         * Makefile.in (autoconf-install): New target.
1133         (autoconf-changelog): Try different way to obtain user name.
1134
1135 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1136
1137         * Makefile.in (autoconf-changelog): New target, update
1138         ChangeLog for all subdirectories - normally used after
1139         autoconf-common target.
1140
1141 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1142
1143         * configure.in (extra_subdirs): Include testsuite for d30v.
1144         * configure: Regenerate.
1145
1146         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1147         ../gdb/Makefile.in
1148         (check): New rules - drive the testsuite.
1149
1150 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1151
1152         * configure.in: Add mn10200 configure lines accidentally
1153         removed.
1154         * configure: Regenerated.
1155
1156 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1157
1158         * configure.in (extra_subdirs): Generalize common sub directory
1159         into a list.
1160         (extra_subdirs): For d30v add igen to the list to be built.
1161
1162 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1163
1164         * configure.in (d30v): New target.
1165         * configure: Regenerated.
1166
1167 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1168
1169         * configure.in: Don't require GCC to build the mn10200
1170         simulator anymore.
1171         * configure: Rebuilt.
1172
1173 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1174
1175         * configure.in: Don't configure any subdirs if no simulator
1176         is being built.  Don't use erc32 for sparc64.
1177         * configure: Regenerated.
1178
1179 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1180
1181         * Makefile.in (autoconf-common): New target.
1182         * configure.in: Do configure common.
1183         * configure: Regenerated.
1184
1185 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1186
1187         * configure configure.in:  Don't configure common anymore.  Files
1188         from common are now built in the individual simualtor directories.
1189         This fixes problems with the WinGDB build procedure.
1190
1191 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1192
1193         * configure: Enable the mn10200 simulator.
1194
1195 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1196
1197         * configure.in (configdirs): Add common.
1198         * configure: Regenerated.
1199
1200 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1201
1202         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1203         system V based targets.
1204         * configure: Regenerate.
1205
1206 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1207
1208         * configure.in (--enable-sim-powerpc): Delete.
1209         (--enable-sim): Add.
1210         * configure: Regenerated.
1211
1212 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1213
1214         * configure.in: Only build the V850 simulator if
1215         we are using gcc.
1216         * configure: Rebuild.
1217
1218 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1219
1220         * configure.in: Do build erc32 for DOS and Windows hosts.
1221         * configure: Rebuild.
1222
1223 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1224
1225         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1226         be inherited from the parent.  Remove INSTALL_XFORM and
1227         INSTALL_XFORM1.  Make INSTALL be set from configure.
1228
1229 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1230
1231         * configure.in: Only build the MIPS simulator if we are using
1232         gcc.
1233         * configure: Rebuild.
1234
1235 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1236
1237         * configure.in (v850-*-*): Added V850 simulator.
1238
1239 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1240
1241         * configure.in (d10v-*-*): Added D10V simulator.
1242
1243 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1244
1245         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1246         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1247         (docdir): Removed.
1248         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1249         (AC_PROG_INSTALL): Added.
1250         * configure: Rebuilt.
1251
1252 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1253
1254         * configure.in: Only configure erc32 if using gcc.
1255         * configure: Rebuild.
1256
1257 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1258
1259         * configure.in (sim_target): Build PowerPC simulator for powerpc
1260         System V.4, Solaris, and Elf targets.
1261         * configure: Regenerate with autoconf 2.10.
1262
1263 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1264
1265         * configure.in: Only built erc32 simulator on Unix hosts as it
1266         uses pseudo ttys.
1267         * configure: Regenerated with autoconf 2.8.
1268
1269 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1270
1271         * erc32: Sparc simulator from the ESA.
1272
1273 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1274
1275         From: Miles Bader  <miles@gnu.ai.mit.edu>
1276         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1277         * configure: Regenerate using autoconf.
1278
1279 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1280
1281         * Makefile.in (install): Fix typo.
1282
1283 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1284
1285         * configure: Regenerate with autoconf 2.7.
1286
1287         * Makefile.in (all): Simplify.
1288         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1289         as in the all target.
1290         (distclean, maintainer-clean, realclean): Likewise.
1291         (install): Likewise.
1292
1293 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1294
1295         * Makefile.in (all): Remove extra '\' char from shell script.
1296
1297 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1298
1299         * Makefile.in (all): Avoid a for loop with zero elements, even if
1300         the loop will not be executed because of an if statement.
1301
1302 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1303
1304         * Makefile.in (install): Add missing semicolon in "fi \".
1305
1306 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1307
1308         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1309         defaults from configure.
1310
1311         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1312         configure defaults.
1313         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1314         if either --enable-sim-powerpc is used, or the host compiler is
1315         GCC.
1316
1317 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1318
1319         * configure.in (mips*-*-*): Added "mips" simulator target.
1320         * configure: Re-generated.
1321
1322 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1323
1324         * Makefile.in (BISON): Remove macro.
1325         (FLAGS_TO_PASS): Remove BISON.
1326
1327 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1328
1329         * configure.in:  Explicitly `exit 0' for broken shells.
1330         * configure:  Rebuilt.
1331
1332 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1333
1334         * common/run.c (main): Initialize the callbacks.
1335
1336 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1337
1338         * Makefile.in (maintainer-clean): New synonym for realclean.
1339
1340 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1341
1342         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1343         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1344
1345 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1346
1347         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1348         <cagney@highland.com.au>.
1349         * configure: Regnerate from configure.in.
1350
1351 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1352
1353         * Update all FSF addresses except those in COPYING* files.
1354
1355 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1356
1357         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1358         submakes either default or passed in value.
1359
1360 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1361
1362         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1363           install): Changed targets so that they descend all
1364           subdirectories in $(SUBDIRS).
1365           (*-all, *-clean, *-install): Removed targets.
1366
1367         * configure.in: Don't bother with target makefile fragments, they
1368           are no longer needed.
1369         * configure: regenerated.
1370
1371         * Makefile.in, configure.in: converted to autoconf.
1372         * configure: New file, generated with autconf 2.4.
1373
1374 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1375
1376         * Makefile.in: Support ARM.
1377         * configure.in: Ditto.
1378
1379 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1380
1381         * Makefile.in: Support W65.
1382         * configure.in: Ditto.
1383
1384 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1385
1386         * Makefile.in: Add TAGS target.
1387
1388 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1389
1390         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1391           install-h8300, clean-h8300, all-h8500, install-h8500,
1392           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1393           recursion lines.
1394
1395 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1396
1397         * Makefile.in: remove endian.h trace from h8500
1398
1399 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1400
1401         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1402
1403 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1404
1405         * Makefile.in: make all of the all-* target (except all-nothing)
1406         depend on endian.h, so that if we're not building a simulator, we
1407         don't built endian
1408
1409 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1410
1411         * Makefile.in (check, installcheck): Added dummy targets.
1412
1413 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1414
1415         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1416         explicitly make it, since some makes apparently don't work with
1417         VPATH and .c to executable rules (SunOS make for example).
1418
1419 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1420
1421         * Makefile.in (endian): Add explicit rule for broken makes.
1422
1423 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1424
1425         * Makefile.in (info, install-info): New targets.
1426         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1427         level Makefile.
1428
1429 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1430
1431         * Makefile.in (endian.h): build endian.h via a temporary file so
1432           that we don't leave an incomplete file lying around on
1433           interrupted builds.
1434           (clean): remove endian, e.h, and endian.h.
1435
1436 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1437
1438         * Makefile.in, configure.in: if target isn't supported, build a
1439         harmless makefile.
1440
1441