sim/ChangeLog

   1 2013-11-07  Will Newton  <will.newton@linaro.org>
   2
   3         PR gdb/15508
   4         * arm/wrapper.c (sim_create_inferior): Call init before
   5         accessing STATE.
   6
   7 2013-11-07  Will Newton  <will.newton@linaro.org>
   8
   9         PR gdb/8989
  10         * arm/wrapper.c (sim_create_inferior): Avoid calling
  11         bfd_get_mach with a NULL bfd.
  12
  13 2013-06-21  Nick Clifton  <nickc@redhat.com>
  14
  15         * msp430: New Directory.
  16         * configure.tgt: Add it.
  17         * configure: Regenerate.
  18
  19 2013-03-15  Steve Ellcey  <sellcey@mips.com>
  20
  21         * arm/wrapper.c (sim_complete_command): Make char arguments const.
  22         * avr/interp.c (sim_complete_command): Ditto.
  23         * common/sim-options.c (sim_complete_command): Ditto.
  24         * cr16/interp.c (sim_complete_command): Ditto.
  25         * erc32/interf.c (sim_complete_command): Ditto.
  26         * m32c/gdb-if.c (sim_complete_command): Ditto.
  27         * microblaze/interp.c (sim_complete_command): Ditto.
  28         * ppc/sim_calls.c (sim_complete_command): Ditto.
  29         * rl78/gdb-if.c (sim_complete_command): Ditto.
  30         * rx/gdb-if.c (sim_complete_command): Ditto.
  31         * sh/interp.c (sim_complete_command): Ditto.
  32
  33 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
  34
  35         Update year range in copyright notice of all files.
  36
  37 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  38
  39         Update old contact info in GPL license notices.
  40
  41 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  42
  43         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
  44
  45 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
  46
  47         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
  48         condition.
  49         * common/acinclude.m4: Define lt_cv_dlopen_libs.
  50         * arm/configure: Regenerate.
  51         * avr/configure: Regenerate.
  52         * bfin/configure: Regenerate.
  53         * common/configure: Regenerate.
  54         * cr16/configure: Regenerate.
  55         * cris/configure: Regenerate.
  56         * d10v/configure: Regenerate.
  57         * erc32/configure: Regenerate.
  58         * frv/configure: Regenerate.
  59         * h8300/configure: Regenerate.
  60         * igen/configure: Regenerate.
  61         * iq2000/configure: Regenerate.
  62         * lm32/configure: Regenerate.
  63         * m32c/configure: Regenerate.
  64         * m32r/configure: Regenerate.
  65         * m68hc11/configure: Regenerate.
  66         * mcore/configure: Regenerate.
  67         * microblaze/configure: Regenerate.
  68         * mips/configure: Regenerate.
  69         * mn10300/configure: Regenerate.
  70         * moxie/configure: Regenerate.
  71         * ppc/configure: Regenerate.
  72         * rl78/configure: Regenerate.
  73         * rx/configure: Regenerate.
  74         * sh/configure: Regenerate.
  75         * sh64/configure: Regenerate.
  76         * testsuite/configure: Regenerate.
  77         * v850/configure: Regenerate.
  78
  79 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  80
  81         * MAINTAINERS: Update my email address.
  82
  83 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  84
  85         * mips/basic.exp: Add mips*-mti-elf* target.
  86         * configure.ac: Add mips*-mti-elf* target.
  87         * configure: Regenerate.
  88
  89 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  90
  91         * configure: Regenerate.
  92
  93 2012-06-06  Michael Eager  <eager@eagercon.com>
  94
  95         * microblaze/interp.c (config.h): Add #include.
  96
  97 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  98
  99         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 100         Frysinger.
 101
 102 2011-11-28  DJ Delorie  <dj@redhat.com>
 103
 104         * configure.tgt: Add rl78 support.
 105         * configure: Regenerate.
 106         * rl78: New directory.
 107         * MAINTAINERS: Add myself as RL78 maintainer.
 108
 109 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 110
 111         * MAINTAINERS: Remove Thiemo Seufer.
 112
 113 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 114
 115         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 116         * configure: Regenerate.
 117
 118 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 119
 120         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 121         handle targets.
 122         * configure: Regenerate.
 123
 124 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 125
 126         * MAINTAINERS: Add bfin entry.
 127         * configure.tgt (bfin-*-*): Handle bfin targets.
 128         * configure: Regenerate.
 129
 130 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 131
 132         * .gitignore: Add /*/hw-config.h.
 133
 134 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 135
 136         * .gitignore: New file.
 137
 138 2010-07-28  DJ Delorie  <dj@redhat.com>
 139
 140         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 141
 142 2010-06-08  Nick Clifton  <nickc@redhat.com>
 143
 144         * reg.c (set_oszc): Use unsigned int for the mask.
 145         (set_szc, set_osz, set_sz): Likewise.
 146
 147 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 148
 149         * configure.ac: Target logic moved out to and included from ...
 150         * configure.tgt: ... this new file.
 151         * configure: Regenerated.
 152
 153 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 154
 155         * README-HACKING: Add more sections.
 156
 157 2010-02-11  Doug Evans  <dje@sebabeach.org>
 158
 159         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 160         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 161         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 162         * cris/semcrisv32f-switch.c: Regenerate.
 163
 164 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 165
 166         * avr/configure: Regenerate.
 167         * cris/configure: Regenerate.
 168         * microblaze/configure: Regenerate.
 169
 170 2010-01-02  Doug Evans  <dje@sebabeach.org>
 171
 172         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 173         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 174         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 175         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 176         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 177         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 178
 179 2010-01-01  Doug Evans  <dje@sebabeach.org>
 180
 181         * cris/mloop.in: Fix copyright year update snafu.
 182
 183 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 184
 185         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 186         * common/common.m4: Use AM_ZLIB to check for zlib support.
 187         * ppc/configure.ac: Likewise.
 188         * arm/configure, avr/configure, common/configure, cr16/configure,
 189         cris/configure, d10v/configure, erc32/configure, frv/configure,
 190         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 191         m32r/configure, m68hc11/configure, mcore/configure,
 192         microblaze/configure, mips/configure, mn10300/configure,
 193         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 194         v850/configure: Regenerate.
 195
 196 2009-11-24  DJ Delorie  <dj@redhat.com>
 197
 198         * rx: New directory.
 199         * configure.ac: Add entry for Renesas RX.
 200         * configure: Regenerate.
 201
 202 2009-11-22  Doug Evans  <dje@sebabeach.org>
 203
 204         * cris/cpuall.h: Regenerate.
 205         * cris/cpuv10.h: Regenerate.
 206         * cris/cpuv32.h: Regenerate.
 207         * cris/decodev10.c: Regenerate.
 208         * cris/decodev10.h: Regenerate.
 209         * cris/decodev32.c: Regenerate.
 210         * cris/decodev32.h: Regenerate.
 211
 212 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 213
 214         * avr/interp.c (sim_write): Allow byte access.
 215         (sim_read): Ditto.
 216
 217 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 218
 219         * avr/interp.c (sim_load): Clear memory before loading.
 220
 221 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 222
 223         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 224
 225 2009-10-23  Doug Evans  <dje@sebabeach.org>
 226
 227         * cris/arch.c: Regenerate.
 228         * cris/arch.h: Regenerate.
 229         * cris/cpuall.h: Regenerate.
 230         * cris/cpuv10.c: Regenerate.
 231         * cris/cpuv10.h: Regenerate.
 232         * cris/cpuv32.c: Regenerate.
 233         * cris/cpuv32.h: Regenerate.
 234         * cris/cris-desc.c: Regenerate.
 235         * cris/cris-desc.h: Regenerate.
 236         * cris/cris-opc.h: Regenerate.
 237         * cris/decodev10.c: Regenerate.
 238         * cris/decodev10.h: Regenerate.
 239         * cris/decodev32.c: Regenerate.
 240         * cris/decodev32.h: Regenerate.
 241         * cris/modelv10.c: Regenerate.
 242         * cris/modelv32.c: Regenerate.
 243         * cris/semcrisv10f-switch.c: Regenerate.
 244         * cris/semcrisv32f-switch.c: Regenerate.
 245
 246 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 247
 248         * avr/interp.c (sim_stop): Return 1.
 249
 250 2009-10-16  Doug Evans  <dje@sebabeach.org>
 251
 252         * MAINTAINERS: Add myself as m32r maintainer.
 253
 254 2009-10-15  Michael Egaer  <eager@eagercon.com>
 255
 256         * MAINTAINERS: Add self as MicroBlaze maintainer.
 257
 258 2009-10-14  Ben Elliston  <bje@gnu.org>
 259
 260         * MAINTAINERS (common): Move myself to "past maintainers" section.
 261
 262 2009-10-06  Michael Eager  <eager@eagercon.com>
 263
 264         * microblaze/interp.c: Add include microblaze-dis.h.
 265
 266 2009-09-23  Michael Eager  <eager@eagercon.com>
 267
 268         * configure: Add microblaze-*.* (not regenerated).
 269         * configure.ac: Likewise.
 270         * microblaze/config.in: New.
 271         * microblaze/configure: Generate.
 272         * microblaze/configure.ac: New.
 273         * microblaze/interp.c: New.
 274         * microblaze/Makefile.in: New.
 275         * microblaze/microblaze.h: New.
 276         * microblaze/microblaze.isa: New.
 277         * microblaze/sim-main.h: New.
 278         * microblaze/sysdep.h: New.
 279
 280 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 281
 282         * avr/config.in: Regenerate.
 283         * avr/configure: Likewise.
 284         * configure: Likewise.
 285         * cris/config.in: Likewise.
 286         * cris/configure: Likewise.
 287
 288         * configure.ac: m4_include toplevel config/override.m4.
 289         * configure: Regenerate.
 290         * avr/configure: Regenerate.
 291         * cris/configure: Regenerate.
 292
 293 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 294
 295         * Makefile.in (datarootdir): New variable.
 296
 297 2009-05-18  Jon Beniston <jon@beniston.com>
 298
 299         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 300         * configure.ac: Add lm32 target.
 301         * lm32: New directory.
 302
 303 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 304
 305         * MAINTAINERS: Orphan ppc.
 306
 307 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 308
 309         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 310         m32c_signal_to_target.  Change signal return values from SIGILL,
 311         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 312         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 313
 314 2009-04-30  Anthony Green  <green@moxielogic.com>
 315
 316         * MAINTAINERS: Add myself for the moxie port.
 317         * moxie: New directory.
 318         * configure.ac: Add entry for moxie.
 319         * configure: Regenerate.
 320
 321 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 322
 323         * avr: New directory.
 324         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 325         * avr/config.in: New file, generated by autoheader.
 326         * avr/configure: New file generated by autoconf.
 327         * configure.ac: Add avr.
 328         * configure: Regenerated.
 329
 330 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 331
 332         * Makefile.in: Add dummy install-pdf, html, and
 333         install-html targets.
 334
 335 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 336
 337         * cris/sim-if.c: Include errno.h.
 338         (cris_start_address, cris_program_offset): New variables.
 339         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 340         enums.
 341         (cris_options): New options --cris-program-offset and
 342         --cris-start-address.
 343         (cris_option_handler): Handle new options.
 344         (cris_program_offset_write, cris_set_section_offset_iterator)
 345         (cris_offset_sections, cris_offset_sections): New functions.
 346         (sim_load): Use cris_program_offset_write as function argument to
 347         cris_load_elf_file, not sim_write.
 348         (struct offsetinfo): New struct.
 349         (cris_handle_interpreter): Fix typo in comment.
 350         (sim_open): Call cris_offset_sections as soon as the bfd of the
 351         infile is available.  Gate bfd validity checks on abfd non-NULL.
 352         (sim_create_inferior): Let cris_start_address when != -1 override
 353         other start-address choices.
 354
 355 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 356
 357         * cris/traps.c (abort): Define to call sim_io_error.
 358         (create_map): Make -1 imply a non-fixed address, not 0.  All
 359         callers changed.  Only prefer the next higher unmapped address if
 360         the last mapped address is no less than 0x40000000.  Check that
 361         the address to be mapped is not already mapped.  Update head
 362         comment.
 363         (unmap_pages): Don't call abort when recursive call fails, just
 364         note and return an error if a page in the range couldn't be unmapped.
 365         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 366         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 367         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 368         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 369         don't abort on page not being mapped.  Handle non-anon filemap
 370         with length padded to pagesize.
 371
 372 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 373
 374         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 375         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 376         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 377         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 378         (TARGET_AT_CLKTCK): Remove redundant macros.
 379         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 380         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 381         callers.
 382         (sim_open): Also pass AT_SECURE.
 383
 384         * cris/sim-main.h (struct _sim_cpu): New member
 385         set_target_thread_data.
 386         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 387         * cris/crisv10f.c: Ditto.
 388         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 389         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 390         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 391         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 392         case.
 393
 394         * cris/traps.c (TARGET_SYS_exit_group): Define.
 395         (cris_break_13_handler): Handle it like the exit for the last
 396         thread.
 397
 398         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 399         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 400         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 401         2.6.27.  Set machine field to the BFD printable name of the
 402         machine.
 403
 404         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 405         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 406         TARGET_MAP_DENYWRITE.
 407
 408         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 409         (TARGET_X_OK, TARGET_F_OK): Define.
 410         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 411
 412         * cris/semcrisv32f-switch.c: Regenerate.
 413
 414 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 415
 416         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 417         just a short CRIS-specific notice.  Tweak the wording for a
 418         failing architecture test.
 419
 420         * cris/traps.c (TARGET_SYS_writev): New macro.
 421         (is_mapped_only, cris_dump_map): New functions.
 422         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 423         and prot combinations and a non-zero page-offset.  If
 424         TARGET_MAP_FIXED, unmap pages before mapping them.
 425         <case TARGET_SYS_mprotect>: When checking, allow any length
 426         argument.  Don't actually do anything.
 427         <case TARGET_SYS_writev>: New case.
 428
 429         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 430         * cris/sim-if.c: Include elf-bfd.h.
 431         (struct progbounds): New members end_loadmem, start_nonloadmem.
 432         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 433         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 434         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 435         static.  Update head comment.  Set new struct progbounds members.
 436         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 437         variables.
 438         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 439         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 440         functions.
 441         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 442         handling to use auxv_entries.  Improve error message and checking
 443         for invalid programs.  Use new variable abfd for the program
 444         instead of for each access reaching into sd to get it.
 445         (sim_create_inferior): If non-zero, use interp_start_addr instead
 446         of the program start address.
 447         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 448         stale comment.  Always specify little-endian.
 449
 450 2008-07-29  Nick Clifton  <nickc@redhat.com>
 451
 452         * common/genmloop.sh: Add new parameter: -shell to specify the
 453         command interpreter to use to run the input file.  This is
 454         necessary because otherwise SHELL is taken from the user's
 455         environment, and not from the makefile that invoked this script
 456         and the user might not be running an sh-like shell.
 457         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 458         * fr30/Makefile.in: Likewise.
 459         * frv/Makefile.in: Likewise.
 460         * i960/Makefile.in: Likewise.
 461         * iq2000/Makefile.in: Likewise.
 462         * m32r/Makefile.in: Likewise.
 463
 464         * frv/mloop.in: Add missing start of line comment marker.
 465
 466 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 467
 468         * cris/configure: Regenerate to track ../common/common.m4 changes.
 469         * cris/config.in: Ditto.
 470
 471 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 472             Daniel Jacobowitz  <dan@codesourcery.com>
 473             Joseph Myers  <joseph@codesourcery.com>
 474
 475         * cris/configure: Regenerate.
 476
 477 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 478
 479         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 480
 481 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 482
 483         * MAINTAINERS: Add myself as maintainer of cr16 port.
 484
 485 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 486
 487         Add simulator for National cr16 processor.
 488         * cr16: New directory.
 489         * configure.ac: Add entry for National cr16.
 490         * configure: Regenerate.
 491
 492 2008-02-05  DJ Delorie  <dj@redhat.com>
 493
 494         * configure.ac (v850): V850 now has a testsuite.
 495         * configure (v850): Likewise.
 496
 497 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 498
 499         Updated copyright notices for most files.
 500
 501 2007-12-19  DJ Delorie  <dj@redhat.com>
 502
 503         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 504         cut_point.
 505
 506 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 507
 508         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 509         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 510         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 511         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 512         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 513         cris/semcrisv32f-switch.c: Regenerate.
 514
 515 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 516
 517         Switch the license of all files explicitly copyright the FSF
 518         to GPLv3.
 519
 520 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 521
 522         * Makefile.in: Add dummy "pdf" target.
 523
 524 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 525
 526         * cris/traps.c (dump_statistics): Change format for cycle numbers
 527         to %llu and cast parameters to unsigned long long.
 528
 529 2007-02-16  Thiemo Seufer  <ths@mips.com>
 530
 531         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 532
 533 2007-01-28  Manuel Lauss  <slauss@resi.at>
 534
 535         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 536         (sh-*-*): Change to sh*-*-*.
 537         * configure: Regenerated.
 538
 539 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 540
 541         Updated copyright notices for most files.
 542
 543 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 544
 545         * Makefile.in (autoconf-common autoheader-common): Only run
 546         autoheader on subdirs with a file config.in.
 547
 548         * configure.ac (common): Make the default "yes" for all targets
 549         with sim subdirs.
 550         * configure: Regenerate.
 551
 552         * Makefile.in (autoconf-common autoheader-common): In documented
 553         usage, say SHELL=/bin/sh.
 554         (.PHONY): Add autoheader-common.
 555
 556         * MAINTAINERS: Add self as authorized committer for *.
 557
 558 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 559             Hans-Peter Nilsson  <hp@axis.com>
 560
 561         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 562         (cris_unknown_syscall_action): Declare.
 563         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 564         (cris_options): Add cris-unknown-syscall option.
 565         (cris_option_handler): Correct comment about and error message for
 566         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 567         * cris/traps.c: Include stdarg.h
 568         (cris_unknown_syscall): New function.
 569         (cris_break_13_handler): Instead of sim_io_eprintf and
 570         sim_engine_halt, call cris_unknown_syscall to handle more or less
 571         unknown syscalls.  Adjust code as necessary to handle return
 572         value.
 573
 574 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 575
 576         * MAINTAINERS: Add Dave Brolley for sh64.
 577
 578 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 579
 580         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 581         (cris_pipe_empty): Correct initialization of "remaining".  Only
 582         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 583         are written.
 584
 585 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 586
 587         * cris/configure.ac: Check for limits.h and sys/param.h.
 588         * cris/configure, cris/config.in: Rebuild.
 589         * cris/traps.c (SIM_PATHMAX): New macro.
 590         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 591
 592 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 593
 594         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 595         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 596         * configure: Regenerated.
 597
 598 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 599
 600         * cris/configure: Regenerated.
 601
 602 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 603
 604         * cris/configure: Regenerated.
 605
 606 2006-05-05  Andreas Schwab  <schwab@suse.de>
 607
 608         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 609         * configure: Regenerate.
 610
 611         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 612         (CC_FOR_BUILD): Don't override.
 613         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 614
 615 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 616
 617         * MAINTAINERS: Add an "Authorized committers" section, and list
 618         DJ Delorie for v850.
 619
 620 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 621
 622         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 623
 624 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 625
 626         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 627         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 628         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 629         (all): Depend on rvdummy$(EXEEXT).
 630         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 631         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 632         default off.
 633         * cris/configure: Regenerate.
 634         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 635         (enum cris_interrupt_type, crisv10deliver_interrupt)
 636         (crisv32deliver_interrupt: New declarations.
 637         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 638         sim_events_tickn and set state-events member work_pending when it's
 639         time for the next event.
 640         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 641         interrupt-delivery function.
 642         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 643         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 644         * cris/devices.c: Include hw-device.h.
 645         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 646         (device_io_write_buffer): Only perform 0x900000xx-functions if
 647         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 648         call hw_io_write_buffer.  Add return 0 last in function.
 649         * cris/sim-if.c (cris_have_900000xxif): Now global.
 650         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 651         Force "-model" option, effectively.
 652         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 653         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 654
 655 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 656
 657         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 658         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 659         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 660
 661 2006-03-13  DJ Delorie  <dj@redhat.com>
 662
 663         * MAINTAINERS: Add self as m32c sim maintainer.
 664
 665 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 666
 667         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 668         mapping.
 669         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 670
 671 2006-01-23  Jim Blandy  <jimb@redhat.com>
 672
 673         Add simulator for Renesas M32C and M16C.
 674
 675         * m32c: New directory.
 676         * configure.ac: Add entry for Renesas M32C.
 677         * configure: Regenerate.
 678
 679 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 680
 681         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 682         cycle count for the current insn.
 683
 684 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 685
 686         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 687         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 688         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 689         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 690
 691 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 692
 693         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 694         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 695         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 696         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 697         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 698         cris/semcrisv32f-switch.c: Regenerate.
 699
 700 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 701
 702         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 703         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 704         TARGET_O_WRONLY.
 705         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 706         F_GETFL on fd 0, 1 and 2.
 707
 708 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 709
 710         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 711         last_open_fd, last_open_flags.
 712         * cris/traps.c: Don't include targ-vals.h.
 713         (TARGET_O_ACCMODE): Define.
 714         (cris_break_13_handler): Set new _sim_cpu members.
 715         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 716         Rearrange code as switch.  Emit "unimplemented" abort for
 717         unimplemented fcntl calls.
 718
 719         * cris/traps.c (TARGET_SYS_stat): Define.
 720         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 721         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 722
 723 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 724
 725         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 726         low 32 bits are used after an unsigned long cast.
 727
 728 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 729
 730         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 731
 732 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 733
 734         * MAINTAINERS: Update my mail address, move myself to the
 735         "Past maintainers" section.
 736
 737 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 738
 739         * configure.ac: Add igen to v850 build.
 740         * configure: Regenerate.
 741
 742 2005-04-29  Paul Brook  <paul@codesourcery.com>
 743
 744         * common/callback.c (PIPE_BUF): Provide default definition.
 745         (os_lstat): Use stat if lstat is not available on the host.
 746         (os_ftruncate): Return EINVAL if not available on the host.
 747         (os_truncate): Ditto.
 748         * common/configure.ac: Check for lstat, truncate and ftruncate.
 749         * common/configure: Regenerate.
 750         * common/config.in: Regenerate.
 751
 752 2005-04-27  Paul Brook  <paul@codesourcery.com>
 753
 754         * common/Make-common.in: Add $(EXEEXT) to "run".
 755
 756 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 757
 758         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 759         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 760         implemented.  In call to create_map, pad length argument to 8k.
 761
 762 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 763
 764         * configure.ac: Add explicit sh64 case.
 765         * configure: Regenerate.
 766
 767 2005-03-30  Paul Brook  <paul@codesourcery.com>
 768
 769         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 770
 771 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 772
 773         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 774         include cgen-ops.h in decodev10.c and decodev32.c.
 775         * cris/sim-main.h: Don't include cgen-ops.h here.
 776         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 777         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 778         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 779         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 780         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 781         cris/semcrisv32f-switch.c: Regenerate.
 782
 783         * cris/traps.c (cris_break_13_handler) <case
 784         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 785         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 786
 787 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 788
 789         * cris/configure: Regenerate.
 790
 791 2005-02-28  Jim Blandy  <jimb@redhat.com>
 792
 793         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 794         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 795         Regenerated, after change to common/aclocal.m4.
 796
 797 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 798
 799         * iq2000: New target subdirectory.
 800         * configure.ac: Add iq2000 target.
 801         * configure: Regenerate.
 802
 803 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 804
 805         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 806         (realclean, install): Fail if subdir make failed.
 807
 808 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 809
 810         * cris: New directory, simulator for Axis Communications CRIS
 811         including CRIS v32, CGEN-based.
 812         * configure.ac: Add corresponding configury.
 813         * configure: Regenerate.
 814
 815 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 816
 817         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 818         common directory.  Remove sparc*-*-* from list.
 819
 820 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 821
 822         * Makefile.in (autoconf-common autoheader-common): Add --force to
 823         autoconf and autoheader.
 824         (autoconf-common autoheader-common)
 825         (autoconf-install autoheader-install): Check for configure.ac, not
 826         configure.in.
 827         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 828         * configure: Re-generate.
 829
 830 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 831
 832         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 833         correctly calls AC_CONFIG_SUBDIRS.
 834         * configure: Re-generate.
 835
 836 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 837
 838         * i960, h8500: Delete directory.
 839
 840 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 841
 842         * d30v, fr30, mn10200, z8k: Delete directory.
 843
 844 2004-03-10  Ben Elliston  <bje@gnu.org>
 845
 846         * MAINTAINERS: Update my mail address.
 847
 848 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 849
 850         * configure.in (mips*-*-*): Configure in testsuite.
 851         * configure: Regenerate.
 852
 853 2003-10-08  Dave Brolley  <brolley@redhat.com>
 854
 855         * configure.in: Move frv handling to alphabetically correct placement.
 856
 857 2003-09-03  Andreas Schwab  <schwab@suse.de>
 858
 859         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 860
 861 2003-08-29  Dave Brolley  <brolley@redhat.com>
 862
 863         * MAINTAINERS: Add myself as maintainer of the FRV port.
 864
 865 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 866             Dave Brolley  <brolley@redhat.com>
 867
 868         * frv/: New directory, simulator for the Fujitsu FRV.
 869         * configure.in: Add frv configury.
 870         * configure: Regenerate.
 871
 872 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 873
 874         * MAINTAINERS: Update my mail address.
 875
 876 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 877
 878         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 879         maintenance.  List igen and sh maintainers.  Mention that target
 880         and global maintainers pick up the slack.
 881
 882 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 883
 884         * configure.in: Add testsuite to extra_subdirs for sh.
 885         * configure: Regenerate.
 886
 887 2003-01-23  Nick Clifton  <nickc@redhat.com>
 888
 889         * Add sh2e support:
 890
 891 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 892
 893         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 894
 895 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 896
 897         * MAINTAINERS: Update my email address.
 898
 899 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 900
 901         * w65/: Delete directory.
 902
 903 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 904
 905         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 906         * configure: Re-generate.
 907
 908 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 909
 910         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 911         * configure: Re-generate.
 912
 913 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 914
 915         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 916         id, date and host to be overriden by NAME, ID, DATE and HOST
 917         respectfully.  Use ISO dates.
 918
 919 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 920
 921         * Makefile.in (ChangeLog): New makefile variable.
 922         * README-HACKING: Mention the ChangeLog makefile variable.
 923
 924 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 925
 926         * tic80/: Delete directory.
 927
 928 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 929
 930         * MAINTAINERS: Update my email address.
 931
 932 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 933
 934         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 935
 936 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 937
 938         * MAINTAINERS: Record self as a co-maintainer of just common/.
 939
 940 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 941
 942         * MAINTAINERS: Point to GDB files describing overall maintaince
 943         and check-in procedures.
 944
 945 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 946
 947         * MAINTAINERS: Add myself for ARM portions.
 948
 949 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 950
 951         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 952         * configure: Re-generate.
 953
 954 2001-02-16  Ben Elliston  <bje@redhat.com>
 955
 956         * MAINTAINERS: Add myself for common portions.
 957
 958 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 959
 960         * MAINTAINERS: Added self and Andrew for the mips sim.
 961
 962 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 963
 964         * MAINTAINERS: Added self and Andrew for the ppc sim.
 965
 966 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 967
 968         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 969         * m68hc11: New directory.
 970         * configure.in: Add.
 971         * configure: Regenerate.
 972
 973 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 974
 975         * tic80: New directory.
 976         * configure.in: Add configury.
 977         * configure: Regenerate.
 978
 979 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 980
 981         * configure.in (extra_subdirs): Add testsuite to strongarm
 982         directories.
 983         * configure: Regenerate.
 984
 985 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 986
 987         * MAINTAINERS: New file.  Blank.
 988
 989 1999-11-18  Ben Elliston  <bje@cygnus.com>
 990
 991         * configure.in: Require autoconf 2.13 and remove obsolete
 992         invocation of AC_C_CROSS.
 993         * configure: Regenerate.
 994
 995 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 996
 997         * configure.in: Configure the testsuite directory for thumb.
 998         * configure: Regenerate.
 999
1000 1999-07-16  Ben Elliston  <bje@cygnus.com>
1001
1002         * configure.in: Configure the testsuite directory for arm.
1003         * configure: Regenerate.
1004
1005 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1006
1007         * configure.in: Add support for MCore target.
1008         * configure: Regenerate.
1009
1010 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1011
1012         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1013         RUNTEST instead of commenting out, fixes portability problem.
1014
1015 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1016
1017         * configure.in: Add support for StrongARM target.
1018         * configure: Regenerate.
1019
1020 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1021
1022         * configure.in: Require autoconf 2.12.1 or higher.
1023
1024 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1025
1026         * configure.in (i960-*-*): Add.
1027         * configure: Rebuild.
1028
1029 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1030
1031         * configure.in: Added case for fr30-*-*.
1032         * configure: Regenerated.
1033
1034 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1035
1036         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1037         to allow successful operation on Windows.
1038
1039 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1040
1041         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1042         check can be invoked recursively.
1043
1044 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1045
1046         * configure.in: Build simulator on sparclite and sparc86x targets.
1047         * configure: Regenerate.
1048
1049 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1050
1051         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1052         to autoconf and autoheader.
1053
1054 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1055
1056         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1057         ../common' to autoconf and autoheader.  Unconditionally run
1058         autoconf in every subdir.
1059         (autoconf-changelog autoheader-changelog): Unconditionally run
1060         commands in every subdir.
1061         (autoconf-install autoheader-install): Likewise.
1062
1063 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1064
1065         * Makefile.in:  Get SHELL from configure.
1066         * (FLAGS_TO_PASS):  Pass down SHELL.
1067         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1068         NT native builds.
1069
1070 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1071
1072         * configure.in (extra_subdirs): Enable igen for mn10300.
1073         * configure: Re-generate.
1074
1075 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1076
1077         * configure.in (extra_subdirs): Add support for thumb target.
1078
1079         * configure (extra_subdirs): Add support for thumb target.
1080
1081 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1082
1083         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1084         target.
1085         * configure: Regenerate.
1086
1087 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1088
1089         * configure.in (extra_subdirs): v850ea needs igen.
1090         * configure: Re-generate.
1091
1092 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1093
1094         * configure.in (testdir): When a testsuite directory, add that to
1095         the list of confdirs.
1096
1097 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1098
1099         * configure.in (extra_subdirs): Enable igen ready for V850.
1100
1101 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1102
1103         * configure.in (w65-*-*, only_if_enabled): Set.
1104         * configure: Re-generate.
1105
1106 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1107
1108         * configure.in (sparc*-*-*, only_if_enabled): Set
1109         only_if_enabled=yes.  Check only_if_enabled before enabling a
1110         simulator.
1111         * configure: Regenerate.
1112
1113 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1114
1115         * configure.in (extra_subdirs): Add v850e target.
1116
1117 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1118
1119         * configure.in (extra_subdirs): Add v850ea target.
1120
1121 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1122
1123         * configure.in (sparc*-*-*): Don't build erc32.
1124         * configure: Regenerate.
1125
1126 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1127
1128         * configure.in (m32r-*-*): New target.
1129         * configure: Regenerate.
1130
1131         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1132
1133 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1134
1135         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1136         thought that .NOEXPORT was the default target.
1137
1138 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1139
1140         * Makefile.in (clean mostlyclean): Restore targets accidentally
1141         deleted in earlier change.
1142
1143 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1144
1145         * Makefile.in (autoheader-common, autoheader-changelog,
1146         autoheader-install): Perform autoheader in addition to autoconf.
1147
1148 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1149
1150         * Makefile.in (autoconf-install): New target.
1151         (autoconf-changelog): Try different way to obtain user name.
1152
1153 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1154
1155         * Makefile.in (autoconf-changelog): New target, update
1156         ChangeLog for all subdirectories - normally used after
1157         autoconf-common target.
1158
1159 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1160
1161         * configure.in (extra_subdirs): Include testsuite for d30v.
1162         * configure: Regenerate.
1163
1164         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1165         ../gdb/Makefile.in
1166         (check): New rules - drive the testsuite.
1167
1168 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1169
1170         * configure.in: Add mn10200 configure lines accidentally
1171         removed.
1172         * configure: Regenerated.
1173
1174 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1175
1176         * configure.in (extra_subdirs): Generalize common sub directory
1177         into a list.
1178         (extra_subdirs): For d30v add igen to the list to be built.
1179
1180 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1181
1182         * configure.in (d30v): New target.
1183         * configure: Regenerated.
1184
1185 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1186
1187         * configure.in: Don't require GCC to build the mn10200
1188         simulator anymore.
1189         * configure: Rebuilt.
1190
1191 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1192
1193         * configure.in: Don't configure any subdirs if no simulator
1194         is being built.  Don't use erc32 for sparc64.
1195         * configure: Regenerated.
1196
1197 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1198
1199         * Makefile.in (autoconf-common): New target.
1200         * configure.in: Do configure common.
1201         * configure: Regenerated.
1202
1203 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1204
1205         * configure configure.in:  Don't configure common anymore.  Files
1206         from common are now built in the individual simualtor directories.
1207         This fixes problems with the WinGDB build procedure.
1208
1209 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1210
1211         * configure: Enable the mn10200 simulator.
1212
1213 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1214
1215         * configure.in (configdirs): Add common.
1216         * configure: Regenerated.
1217
1218 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1219
1220         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1221         system V based targets.
1222         * configure: Regenerate.
1223
1224 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1225
1226         * configure.in (--enable-sim-powerpc): Delete.
1227         (--enable-sim): Add.
1228         * configure: Regenerated.
1229
1230 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1231
1232         * configure.in: Only build the V850 simulator if
1233         we are using gcc.
1234         * configure: Rebuild.
1235
1236 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1237
1238         * configure.in: Do build erc32 for DOS and Windows hosts.
1239         * configure: Rebuild.
1240
1241 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1242
1243         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1244         be inherited from the parent.  Remove INSTALL_XFORM and
1245         INSTALL_XFORM1.  Make INSTALL be set from configure.
1246
1247 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1248
1249         * configure.in: Only build the MIPS simulator if we are using
1250         gcc.
1251         * configure: Rebuild.
1252
1253 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1254
1255         * configure.in (v850-*-*): Added V850 simulator.
1256
1257 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1258
1259         * configure.in (d10v-*-*): Added D10V simulator.
1260
1261 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1262
1263         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1264         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1265         (docdir): Removed.
1266         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1267         (AC_PROG_INSTALL): Added.
1268         * configure: Rebuilt.
1269
1270 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1271
1272         * configure.in: Only configure erc32 if using gcc.
1273         * configure: Rebuild.
1274
1275 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1276
1277         * configure.in (sim_target): Build PowerPC simulator for powerpc
1278         System V.4, Solaris, and Elf targets.
1279         * configure: Regenerate with autoconf 2.10.
1280
1281 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1282
1283         * configure.in: Only built erc32 simulator on Unix hosts as it
1284         uses pseudo ttys.
1285         * configure: Regenerated with autoconf 2.8.
1286
1287 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1288
1289         * erc32: Sparc simulator from the ESA.
1290
1291 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1292
1293         From: Miles Bader  <miles@gnu.ai.mit.edu>
1294         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1295         * configure: Regenerate using autoconf.
1296
1297 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1298
1299         * Makefile.in (install): Fix typo.
1300
1301 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1302
1303         * configure: Regenerate with autoconf 2.7.
1304
1305         * Makefile.in (all): Simplify.
1306         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1307         as in the all target.
1308         (distclean, maintainer-clean, realclean): Likewise.
1309         (install): Likewise.
1310
1311 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1312
1313         * Makefile.in (all): Remove extra '\' char from shell script.
1314
1315 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1316
1317         * Makefile.in (all): Avoid a for loop with zero elements, even if
1318         the loop will not be executed because of an if statement.
1319
1320 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1321
1322         * Makefile.in (install): Add missing semicolon in "fi \".
1323
1324 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1325
1326         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1327         defaults from configure.
1328
1329         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1330         configure defaults.
1331         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1332         if either --enable-sim-powerpc is used, or the host compiler is
1333         GCC.
1334
1335 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1336
1337         * configure.in (mips*-*-*): Added "mips" simulator target.
1338         * configure: Re-generated.
1339
1340 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1341
1342         * Makefile.in (BISON): Remove macro.
1343         (FLAGS_TO_PASS): Remove BISON.
1344
1345 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1346
1347         * configure.in:  Explicitly `exit 0' for broken shells.
1348         * configure:  Rebuilt.
1349
1350 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1351
1352         * common/run.c (main): Initialize the callbacks.
1353
1354 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1355
1356         * Makefile.in (maintainer-clean): New synonym for realclean.
1357
1358 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1359
1360         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1361         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1362
1363 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1364
1365         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1366         <cagney@highland.com.au>.
1367         * configure: Regnerate from configure.in.
1368
1369 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1370
1371         * Update all FSF addresses except those in COPYING* files.
1372
1373 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1374
1375         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1376         submakes either default or passed in value.
1377
1378 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1379
1380         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1381           install): Changed targets so that they descend all
1382           subdirectories in $(SUBDIRS).
1383           (*-all, *-clean, *-install): Removed targets.
1384
1385         * configure.in: Don't bother with target makefile fragments, they
1386           are no longer needed.
1387         * configure: regenerated.
1388
1389         * Makefile.in, configure.in: converted to autoconf.
1390         * configure: New file, generated with autconf 2.4.
1391
1392 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1393
1394         * Makefile.in: Support ARM.
1395         * configure.in: Ditto.
1396
1397 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1398
1399         * Makefile.in: Support W65.
1400         * configure.in: Ditto.
1401
1402 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1403
1404         * Makefile.in: Add TAGS target.
1405
1406 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1407
1408         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1409           install-h8300, clean-h8300, all-h8500, install-h8500,
1410           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1411           recursion lines.
1412
1413 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1414
1415         * Makefile.in: remove endian.h trace from h8500
1416
1417 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1418
1419         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1420
1421 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1422
1423         * Makefile.in: make all of the all-* target (except all-nothing)
1424         depend on endian.h, so that if we're not building a simulator, we
1425         don't built endian
1426
1427 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1428
1429         * Makefile.in (check, installcheck): Added dummy targets.
1430
1431 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1432
1433         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1434         explicitly make it, since some makes apparently don't work with
1435         VPATH and .c to executable rules (SunOS make for example).
1436
1437 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1438
1439         * Makefile.in (endian): Add explicit rule for broken makes.
1440
1441 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1442
1443         * Makefile.in (info, install-info): New targets.
1444         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1445         level Makefile.
1446
1447 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1448
1449         * Makefile.in (endian.h): build endian.h via a temporary file so
1450           that we don't leave an incomplete file lying around on
1451           interrupted builds.
1452           (clean): remove endian, e.h, and endian.h.
1453
1454 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1455
1456         * Makefile.in, configure.in: if target isn't supported, build a
1457         harmless makefile.
1458
1459