sim/ChangeLog

   1 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
   2
   3         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
   4         ISA maintenance.
   5
   6 2018-07-19  DJ Delorie  <dj@redhat.com>
   7
   8         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
   9
  10 2018-07-14  Stafford Horne  <shorne@gmail.com>
  11
  12         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  13
  14 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  15
  16         * All configure.ac: Remove AC_PREREQ.
  17         * All configure: Re-generate.
  18
  19 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  20
  21         * MAINTAINERS: Update my company e-mail address.
  22
  23 2017-12-12  Stafford Horne  <shorne@gmail.com>
  24             Peter Gavin  <pgavin@gmail.com>
  25
  26         * configure: Regenerated.
  27         * or1k/aclocal.m4: Generated.
  28         * or1k/config.in: Generated.
  29         * or1k/configure: Generated.
  30
  31 2017-12-12  Stafford Horne  <shorne@gmail.com>
  32             Peter Gavin  <pgavin@gmail.com>
  33
  34         * or1k/arch.c: Generated.
  35         * or1k/arch.h: Generated.
  36         * or1k/cpu.c: Generated.
  37         * or1k/cpu.h: Generated.
  38         * or1k/cpuall.h: Generated.
  39         * or1k/decode.c: Generated.
  40         * or1k/decode.h: Generated.
  41         * or1k/model.c: Generated.
  42         * or1k/sem-switch.c: Generated.
  43         * or1k/sem.c: Generated.
  44
  45 2017-12-12  Stafford Horne  <shorne@gmail.com>
  46             Peter Gavin  <pgavin@gmail.com>
  47
  48         * configure.tgt: Add or1k sim.
  49         * or1k/README: New file.
  50         * or1k/Makefile.in: New file.
  51         * or1k/configure.ac: New file.
  52         * or1k/mloop.in: New file.
  53         * or1k/or1k-sim.h: New file.
  54         * or1k/or1k.c: New file.
  55         * or1k/sim-if.c: New file.
  56         * or1k/sim-main.h: New file.
  57         * or1k/traps.c: New file.
  58
  59 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
  60
  61         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
  62
  63 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  64
  65         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
  66
  67 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  68
  69         * MAINTAINERS (ft32): Add myself.
  70
  71 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
  72
  73         * MAINTAINERS (aarch64): Update my email address.
  74
  75 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
  76
  77         * configure.ac: Honor existing CC_FOR_BUILD in environment.
  78         * configure: Regenerate.
  79
  80 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
  81
  82         * MAINTAINTERS (aarch64): Add myself.
  83
  84 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
  85
  86         * MAINTAINERS (Maintainers for particular sims): Add myself as
  87         a MIPS maintainer.
  88
  89 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
  90
  91         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
  92
  93 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
  94
  95         * configure.ac: Delete sim_common check and the
  96         AC_CONFIG_SUBDIRS(common) call.
  97         * configure: Regenerate.
  98         * configure.tgt (sim_common): Delete the variable.
  99
 100 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 101
 102         * .gitignore: Delete /common/cconfig.h entry.
 103
 104 2016-01-05  Nick Clifton  <nickc@redhat.com>
 105
 106         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 107
 108 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 109
 110         * aarch64/simulator.c: Remove syscall.h include.
 111
 112 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * README-HACKING: Delete mention of tconfig.h.
 115
 116 2015-11-24  Nick Clifton  <nickc@redhat.com>
 117
 118         * configure.tgt: Add aarch64 entry.
 119         * configure: Regenerate.
 120
 121 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 122
 123         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 124         * configure: Regenerate.
 125
 126 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 127
 128         * README-HACKING: Change configure.in to configure.ac.
 129
 130 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 131
 132         * arm/configure: Regenerated.
 133         * avr/configure: Likewise.
 134         * bfin/configure: Likewise.
 135         * common/configure: Likewise.
 136         * cr16/configure: Likewise.
 137         * cris/configure: Likewise.
 138         * d10v/configure: Likewise.
 139         * erc32/configure: Likewise.
 140         * frv/configure: Likewise.
 141         * ft32/configure: Likewise.
 142         * h8300/configure: Likewise.
 143         * igen/configure: Likewise.
 144         * iq2000/configure: Likewise.
 145         * lm32/configure: Likewise.
 146         * m32c/configure: Likewise.
 147         * m32r/configure: Likewise.
 148         * m68hc11/configure: Likewise.
 149         * mcore/configure: Likewise.
 150         * microblaze/configure: Likewise.
 151         * mips/configure: Likewise.
 152         * mn10300/configure: Likewise.
 153         * moxie/configure: Likewise.
 154         * msp430/configure: Likewise.
 155         * ppc/configure: Likewise.
 156         * rl78/configure: Likewise.
 157         * rx/configure: Likewise.
 158         * sh/configure: Likewise.
 159         * sh64/configure: Likewise.
 160         * v850/configure: Likewise.
 161
 162 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 163
 164         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 165         (BFD_LIB): Remove $(ZLIB).
 166         (CONFIG_LIBS): Add $(ZLIB).
 167         * ppc/Makefile.in (ZLIBINC): Removed.
 168         (INCLUDES): Remove $(ZLIBINC).
 169         (BFD_LIB): Remove $(ZLIB).
 170
 171 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 172
 173         * arm/configure: Regenerated.
 174         * avr/configure: Likewise.
 175         * bfin/configure: Likewise.
 176         * common/configure: Likewise.
 177         * cr16/configure: Likewise.
 178         * cris/configure: Likewise.
 179         * d10v/configure: Likewise.
 180         * erc32/configure: Likewise.
 181         * frv/configure: Likewise.
 182         * ft32/configure: Likewise.
 183         * h8300/configure: Likewise.
 184         * igen/configure: Likewise.
 185         * iq2000/configure: Likewise.
 186         * lm32/configure: Likewise.
 187         * m32c/configure: Likewise.
 188         * m32r/configure: Likewise.
 189         * m68hc11/configure: Likewise.
 190         * mcore/configure: Likewise.
 191         * microblaze/configure: Likewise.
 192         * mips/configure: Likewise.
 193         * mn10300/configure: Likewise.
 194         * moxie/configure: Likewise.
 195         * msp430/configure: Likewise.
 196         * ppc/configure: Likewise.
 197         * rl78/configure: Likewise.
 198         * rx/configure: Likewise.
 199         * sh/configure: Likewise.
 200         * sh64/configure: Likewise.
 201         * v850/configure: Likewise.
 202
 203 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 204
 205         * configure: Regenerate.
 206         * configure.ac: Delete sim_testsuite check and config in testsuite.
 207         * configure.tgt (sim_testsuite): Delete everywhere.
 208
 209 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 210
 211         * configure: Regenerate.
 212         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 213
 214 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 215
 216         * configure.tgt: Add FT32 entry.
 217         * configure: Regenerate.
 218
 219 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 220
 221         * .gitignore: Delete tconfig.h.
 222         * README-HACKING: Change tconfig.in to tconfig.h.
 223
 224 2014-03-12  Nick Clifton  <nickc@redhat.com>
 225
 226         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 227
 228 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 229
 230         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 231         * configure: Regenerate.
 232
 233 2014-01-06  Tom Tromey  <tromey@redhat.com>
 234
 235         * common/cgen-trace.c: Don't use old VA_* macros.
 236         * common/sim-load.c (xprintf): Likewise.
 237         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 238
 239 2014-01-06  Tom Tromey  <tromey@redhat.com>
 240
 241         * README-HACKING: Don't use PARAMS.
 242         * arm/wrapper.c: Don't use PARAMS.
 243         * bfin/sim-main.h: Don't use PARAMS.
 244         * common/callback.c: Don't use PARAMS.
 245         * common/cgen-trace.c: Don't use PARAMS.
 246         * common/run-sim.h: Don't use PARAMS.
 247         * common/run.c: Don't use PARAMS.
 248         * common/sim-base.h: Don't use PARAMS.
 249         * common/sim-load.c: Don't use PARAMS.
 250         * common/sim-options.h: Don't use PARAMS.
 251         * common/sim-trace.c: Don't use PARAMS.
 252         * common/sim-trace.h: Don't use PARAMS.
 253         * common/sim-utils.h: Don't use PARAMS.
 254         * cr16/cr16_sim.h: Don't use PARAMS.
 255         * cr16/gencode.c: Don't use PARAMS.
 256         * cr16/interp.c: Don't use PARAMS.
 257         * cr16/simops.c: Don't use PARAMS.
 258         * d10v/d10v_sim.h: Don't use PARAMS.
 259         * d10v/gencode.c: Don't use PARAMS.
 260         * d10v/interp.c: Don't use PARAMS.
 261         * d10v/simops.c: Don't use PARAMS.
 262         * erc32/erc32.c: Don't use PARAMS.
 263         * erc32/exec.c: Don't use PARAMS.
 264         * erc32/float.c: Don't use PARAMS.
 265         * erc32/func.c: Don't use PARAMS.
 266         * erc32/sis.c: Don't use PARAMS.
 267         * erc32/sis.h: Don't use PARAMS.
 268         * mips/interp.c: Don't use PARAMS.
 269         * mips/sim-main.h: Don't use PARAMS.
 270         * sh/interp.c: Don't use PARAMS.
 271         * v850/sim-main.h: Don't use PARAMS.
 272         * v850/v850_sim.h: Don't use PARAMS.
 273
 274 2013-11-07  Will Newton  <will.newton@linaro.org>
 275
 276         PR gdb/15508
 277         * arm/wrapper.c (sim_create_inferior): Call init before
 278         accessing STATE.
 279
 280 2013-11-07  Will Newton  <will.newton@linaro.org>
 281
 282         PR gdb/8989
 283         * arm/wrapper.c (sim_create_inferior): Avoid calling
 284         bfd_get_mach with a NULL bfd.
 285
 286 2013-06-21  Nick Clifton  <nickc@redhat.com>
 287
 288         * msp430: New Directory.
 289         * configure.tgt: Add it.
 290         * configure: Regenerate.
 291
 292 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 293
 294         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 295         * avr/interp.c (sim_complete_command): Ditto.
 296         * common/sim-options.c (sim_complete_command): Ditto.
 297         * cr16/interp.c (sim_complete_command): Ditto.
 298         * erc32/interf.c (sim_complete_command): Ditto.
 299         * m32c/gdb-if.c (sim_complete_command): Ditto.
 300         * microblaze/interp.c (sim_complete_command): Ditto.
 301         * ppc/sim_calls.c (sim_complete_command): Ditto.
 302         * rl78/gdb-if.c (sim_complete_command): Ditto.
 303         * rx/gdb-if.c (sim_complete_command): Ditto.
 304         * sh/interp.c (sim_complete_command): Ditto.
 305
 306 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 307
 308         Update year range in copyright notice of all files.
 309
 310 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 311
 312         Update old contact info in GPL license notices.
 313
 314 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 315
 316         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 317
 318 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 319
 320         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 321         condition.
 322         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 323         * arm/configure: Regenerate.
 324         * avr/configure: Regenerate.
 325         * bfin/configure: Regenerate.
 326         * common/configure: Regenerate.
 327         * cr16/configure: Regenerate.
 328         * cris/configure: Regenerate.
 329         * d10v/configure: Regenerate.
 330         * erc32/configure: Regenerate.
 331         * frv/configure: Regenerate.
 332         * h8300/configure: Regenerate.
 333         * igen/configure: Regenerate.
 334         * iq2000/configure: Regenerate.
 335         * lm32/configure: Regenerate.
 336         * m32c/configure: Regenerate.
 337         * m32r/configure: Regenerate.
 338         * m68hc11/configure: Regenerate.
 339         * mcore/configure: Regenerate.
 340         * microblaze/configure: Regenerate.
 341         * mips/configure: Regenerate.
 342         * mn10300/configure: Regenerate.
 343         * moxie/configure: Regenerate.
 344         * ppc/configure: Regenerate.
 345         * rl78/configure: Regenerate.
 346         * rx/configure: Regenerate.
 347         * sh/configure: Regenerate.
 348         * sh64/configure: Regenerate.
 349         * testsuite/configure: Regenerate.
 350         * v850/configure: Regenerate.
 351
 352 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 353
 354         * MAINTAINERS: Update my email address.
 355
 356 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 357
 358         * mips/basic.exp: Add mips*-mti-elf* target.
 359         * configure.ac: Add mips*-mti-elf* target.
 360         * configure: Regenerate.
 361
 362 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 363
 364         * configure: Regenerate.
 365
 366 2012-06-06  Michael Eager  <eager@eagercon.com>
 367
 368         * microblaze/interp.c (config.h): Add #include.
 369
 370 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 371
 372         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 373         Frysinger.
 374
 375 2011-11-28  DJ Delorie  <dj@redhat.com>
 376
 377         * configure.tgt: Add rl78 support.
 378         * configure: Regenerate.
 379         * rl78: New directory.
 380         * MAINTAINERS: Add myself as RL78 maintainer.
 381
 382 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 383
 384         * MAINTAINERS: Remove Thiemo Seufer.
 385
 386 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 387
 388         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 389         * configure: Regenerate.
 390
 391 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 392
 393         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 394         handle targets.
 395         * configure: Regenerate.
 396
 397 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 398
 399         * MAINTAINERS: Add bfin entry.
 400         * configure.tgt (bfin-*-*): Handle bfin targets.
 401         * configure: Regenerate.
 402
 403 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 404
 405         * .gitignore: Add /*/hw-config.h.
 406
 407 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 408
 409         * .gitignore: New file.
 410
 411 2010-07-28  DJ Delorie  <dj@redhat.com>
 412
 413         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 414
 415 2010-06-08  Nick Clifton  <nickc@redhat.com>
 416
 417         * reg.c (set_oszc): Use unsigned int for the mask.
 418         (set_szc, set_osz, set_sz): Likewise.
 419
 420 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 421
 422         * configure.ac: Target logic moved out to and included from ...
 423         * configure.tgt: ... this new file.
 424         * configure: Regenerated.
 425
 426 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 427
 428         * README-HACKING: Add more sections.
 429
 430 2010-02-11  Doug Evans  <dje@sebabeach.org>
 431
 432         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 433         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 434         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 435         * cris/semcrisv32f-switch.c: Regenerate.
 436
 437 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 438
 439         * avr/configure: Regenerate.
 440         * cris/configure: Regenerate.
 441         * microblaze/configure: Regenerate.
 442
 443 2010-01-02  Doug Evans  <dje@sebabeach.org>
 444
 445         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 446         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 447         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 448         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 449         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 450         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 451
 452 2010-01-01  Doug Evans  <dje@sebabeach.org>
 453
 454         * cris/mloop.in: Fix copyright year update snafu.
 455
 456 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 457
 458         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 459         * common/common.m4: Use AM_ZLIB to check for zlib support.
 460         * ppc/configure.ac: Likewise.
 461         * arm/configure, avr/configure, common/configure, cr16/configure,
 462         cris/configure, d10v/configure, erc32/configure, frv/configure,
 463         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 464         m32r/configure, m68hc11/configure, mcore/configure,
 465         microblaze/configure, mips/configure, mn10300/configure,
 466         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 467         v850/configure: Regenerate.
 468
 469 2009-11-24  DJ Delorie  <dj@redhat.com>
 470
 471         * rx: New directory.
 472         * configure.ac: Add entry for Renesas RX.
 473         * configure: Regenerate.
 474
 475 2009-11-22  Doug Evans  <dje@sebabeach.org>
 476
 477         * cris/cpuall.h: Regenerate.
 478         * cris/cpuv10.h: Regenerate.
 479         * cris/cpuv32.h: Regenerate.
 480         * cris/decodev10.c: Regenerate.
 481         * cris/decodev10.h: Regenerate.
 482         * cris/decodev32.c: Regenerate.
 483         * cris/decodev32.h: Regenerate.
 484
 485 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 486
 487         * avr/interp.c (sim_write): Allow byte access.
 488         (sim_read): Ditto.
 489
 490 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 491
 492         * avr/interp.c (sim_load): Clear memory before loading.
 493
 494 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 495
 496         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 497
 498 2009-10-23  Doug Evans  <dje@sebabeach.org>
 499
 500         * cris/arch.c: Regenerate.
 501         * cris/arch.h: Regenerate.
 502         * cris/cpuall.h: Regenerate.
 503         * cris/cpuv10.c: Regenerate.
 504         * cris/cpuv10.h: Regenerate.
 505         * cris/cpuv32.c: Regenerate.
 506         * cris/cpuv32.h: Regenerate.
 507         * cris/cris-desc.c: Regenerate.
 508         * cris/cris-desc.h: Regenerate.
 509         * cris/cris-opc.h: Regenerate.
 510         * cris/decodev10.c: Regenerate.
 511         * cris/decodev10.h: Regenerate.
 512         * cris/decodev32.c: Regenerate.
 513         * cris/decodev32.h: Regenerate.
 514         * cris/modelv10.c: Regenerate.
 515         * cris/modelv32.c: Regenerate.
 516         * cris/semcrisv10f-switch.c: Regenerate.
 517         * cris/semcrisv32f-switch.c: Regenerate.
 518
 519 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 520
 521         * avr/interp.c (sim_stop): Return 1.
 522
 523 2009-10-16  Doug Evans  <dje@sebabeach.org>
 524
 525         * MAINTAINERS: Add myself as m32r maintainer.
 526
 527 2009-10-15  Michael Egaer  <eager@eagercon.com>
 528
 529         * MAINTAINERS: Add self as MicroBlaze maintainer.
 530
 531 2009-10-14  Ben Elliston  <bje@gnu.org>
 532
 533         * MAINTAINERS (common): Move myself to "past maintainers" section.
 534
 535 2009-10-06  Michael Eager  <eager@eagercon.com>
 536
 537         * microblaze/interp.c: Add include microblaze-dis.h.
 538
 539 2009-09-23  Michael Eager  <eager@eagercon.com>
 540
 541         * configure: Add microblaze-*.* (not regenerated).
 542         * configure.ac: Likewise.
 543         * microblaze/config.in: New.
 544         * microblaze/configure: Generate.
 545         * microblaze/configure.ac: New.
 546         * microblaze/interp.c: New.
 547         * microblaze/Makefile.in: New.
 548         * microblaze/microblaze.h: New.
 549         * microblaze/microblaze.isa: New.
 550         * microblaze/sim-main.h: New.
 551         * microblaze/sysdep.h: New.
 552
 553 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 554
 555         * avr/config.in: Regenerate.
 556         * avr/configure: Likewise.
 557         * configure: Likewise.
 558         * cris/config.in: Likewise.
 559         * cris/configure: Likewise.
 560
 561         * configure.ac: m4_include toplevel config/override.m4.
 562         * configure: Regenerate.
 563         * avr/configure: Regenerate.
 564         * cris/configure: Regenerate.
 565
 566 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 567
 568         * Makefile.in (datarootdir): New variable.
 569
 570 2009-05-18  Jon Beniston <jon@beniston.com>
 571
 572         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 573         * configure.ac: Add lm32 target.
 574         * lm32: New directory.
 575
 576 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 577
 578         * MAINTAINERS: Orphan ppc.
 579
 580 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 581
 582         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 583         m32c_signal_to_target.  Change signal return values from SIGILL,
 584         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 585         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 586
 587 2009-04-30  Anthony Green  <green@moxielogic.com>
 588
 589         * MAINTAINERS: Add myself for the moxie port.
 590         * moxie: New directory.
 591         * configure.ac: Add entry for moxie.
 592         * configure: Regenerate.
 593
 594 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 595
 596         * avr: New directory.
 597         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 598         * avr/config.in: New file, generated by autoheader.
 599         * avr/configure: New file generated by autoconf.
 600         * configure.ac: Add avr.
 601         * configure: Regenerated.
 602
 603 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 604
 605         * Makefile.in: Add dummy install-pdf, html, and
 606         install-html targets.
 607
 608 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 609
 610         * cris/sim-if.c: Include errno.h.
 611         (cris_start_address, cris_program_offset): New variables.
 612         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 613         enums.
 614         (cris_options): New options --cris-program-offset and
 615         --cris-start-address.
 616         (cris_option_handler): Handle new options.
 617         (cris_program_offset_write, cris_set_section_offset_iterator)
 618         (cris_offset_sections, cris_offset_sections): New functions.
 619         (sim_load): Use cris_program_offset_write as function argument to
 620         cris_load_elf_file, not sim_write.
 621         (struct offsetinfo): New struct.
 622         (cris_handle_interpreter): Fix typo in comment.
 623         (sim_open): Call cris_offset_sections as soon as the bfd of the
 624         infile is available.  Gate bfd validity checks on abfd non-NULL.
 625         (sim_create_inferior): Let cris_start_address when != -1 override
 626         other start-address choices.
 627
 628 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 629
 630         * cris/traps.c (abort): Define to call sim_io_error.
 631         (create_map): Make -1 imply a non-fixed address, not 0.  All
 632         callers changed.  Only prefer the next higher unmapped address if
 633         the last mapped address is no less than 0x40000000.  Check that
 634         the address to be mapped is not already mapped.  Update head
 635         comment.
 636         (unmap_pages): Don't call abort when recursive call fails, just
 637         note and return an error if a page in the range couldn't be unmapped.
 638         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 639         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 640         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 641         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 642         don't abort on page not being mapped.  Handle non-anon filemap
 643         with length padded to pagesize.
 644
 645 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 646
 647         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 648         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 649         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 650         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 651         (TARGET_AT_CLKTCK): Remove redundant macros.
 652         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 653         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 654         callers.
 655         (sim_open): Also pass AT_SECURE.
 656
 657         * cris/sim-main.h (struct _sim_cpu): New member
 658         set_target_thread_data.
 659         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 660         * cris/crisv10f.c: Ditto.
 661         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 662         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 663         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 664         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 665         case.
 666
 667         * cris/traps.c (TARGET_SYS_exit_group): Define.
 668         (cris_break_13_handler): Handle it like the exit for the last
 669         thread.
 670
 671         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 672         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 673         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 674         2.6.27.  Set machine field to the BFD printable name of the
 675         machine.
 676
 677         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 678         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 679         TARGET_MAP_DENYWRITE.
 680
 681         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 682         (TARGET_X_OK, TARGET_F_OK): Define.
 683         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 684
 685         * cris/semcrisv32f-switch.c: Regenerate.
 686
 687 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 688
 689         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 690         just a short CRIS-specific notice.  Tweak the wording for a
 691         failing architecture test.
 692
 693         * cris/traps.c (TARGET_SYS_writev): New macro.
 694         (is_mapped_only, cris_dump_map): New functions.
 695         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 696         and prot combinations and a non-zero page-offset.  If
 697         TARGET_MAP_FIXED, unmap pages before mapping them.
 698         <case TARGET_SYS_mprotect>: When checking, allow any length
 699         argument.  Don't actually do anything.
 700         <case TARGET_SYS_writev>: New case.
 701
 702         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 703         * cris/sim-if.c: Include elf-bfd.h.
 704         (struct progbounds): New members end_loadmem, start_nonloadmem.
 705         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 706         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 707         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 708         static.  Update head comment.  Set new struct progbounds members.
 709         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 710         variables.
 711         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 712         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 713         functions.
 714         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 715         handling to use auxv_entries.  Improve error message and checking
 716         for invalid programs.  Use new variable abfd for the program
 717         instead of for each access reaching into sd to get it.
 718         (sim_create_inferior): If non-zero, use interp_start_addr instead
 719         of the program start address.
 720         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 721         stale comment.  Always specify little-endian.
 722
 723 2008-07-29  Nick Clifton  <nickc@redhat.com>
 724
 725         * common/genmloop.sh: Add new parameter: -shell to specify the
 726         command interpreter to use to run the input file.  This is
 727         necessary because otherwise SHELL is taken from the user's
 728         environment, and not from the makefile that invoked this script
 729         and the user might not be running an sh-like shell.
 730         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 731         * fr30/Makefile.in: Likewise.
 732         * frv/Makefile.in: Likewise.
 733         * i960/Makefile.in: Likewise.
 734         * iq2000/Makefile.in: Likewise.
 735         * m32r/Makefile.in: Likewise.
 736
 737         * frv/mloop.in: Add missing start of line comment marker.
 738
 739 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 740
 741         * cris/configure: Regenerate to track ../common/common.m4 changes.
 742         * cris/config.in: Ditto.
 743
 744 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 745             Daniel Jacobowitz  <dan@codesourcery.com>
 746             Joseph Myers  <joseph@codesourcery.com>
 747
 748         * cris/configure: Regenerate.
 749
 750 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 751
 752         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 753
 754 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 755
 756         * MAINTAINERS: Add myself as maintainer of cr16 port.
 757
 758 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 759
 760         Add simulator for National cr16 processor.
 761         * cr16: New directory.
 762         * configure.ac: Add entry for National cr16.
 763         * configure: Regenerate.
 764
 765 2008-02-05  DJ Delorie  <dj@redhat.com>
 766
 767         * configure.ac (v850): V850 now has a testsuite.
 768         * configure (v850): Likewise.
 769
 770 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 771
 772         Updated copyright notices for most files.
 773
 774 2007-12-19  DJ Delorie  <dj@redhat.com>
 775
 776         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 777         cut_point.
 778
 779 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 780
 781         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 782         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 783         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 784         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 785         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 786         cris/semcrisv32f-switch.c: Regenerate.
 787
 788 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 789
 790         Switch the license of all files explicitly copyright the FSF
 791         to GPLv3.
 792
 793 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 794
 795         * Makefile.in: Add dummy "pdf" target.
 796
 797 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 798
 799         * cris/traps.c (dump_statistics): Change format for cycle numbers
 800         to %llu and cast parameters to unsigned long long.
 801
 802 2007-02-16  Thiemo Seufer  <ths@mips.com>
 803
 804         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 805
 806 2007-01-28  Manuel Lauss  <slauss@resi.at>
 807
 808         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 809         (sh-*-*): Change to sh*-*-*.
 810         * configure: Regenerated.
 811
 812 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 813
 814         Updated copyright notices for most files.
 815
 816 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 817
 818         * Makefile.in (autoconf-common autoheader-common): Only run
 819         autoheader on subdirs with a file config.in.
 820
 821         * configure.ac (common): Make the default "yes" for all targets
 822         with sim subdirs.
 823         * configure: Regenerate.
 824
 825         * Makefile.in (autoconf-common autoheader-common): In documented
 826         usage, say SHELL=/bin/sh.
 827         (.PHONY): Add autoheader-common.
 828
 829         * MAINTAINERS: Add self as authorized committer for *.
 830
 831 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 832             Hans-Peter Nilsson  <hp@axis.com>
 833
 834         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 835         (cris_unknown_syscall_action): Declare.
 836         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 837         (cris_options): Add cris-unknown-syscall option.
 838         (cris_option_handler): Correct comment about and error message for
 839         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 840         * cris/traps.c: Include stdarg.h
 841         (cris_unknown_syscall): New function.
 842         (cris_break_13_handler): Instead of sim_io_eprintf and
 843         sim_engine_halt, call cris_unknown_syscall to handle more or less
 844         unknown syscalls.  Adjust code as necessary to handle return
 845         value.
 846
 847 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 848
 849         * MAINTAINERS: Add Dave Brolley for sh64.
 850
 851 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 852
 853         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 854         (cris_pipe_empty): Correct initialization of "remaining".  Only
 855         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 856         are written.
 857
 858 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 859
 860         * cris/configure.ac: Check for limits.h and sys/param.h.
 861         * cris/configure, cris/config.in: Rebuild.
 862         * cris/traps.c (SIM_PATHMAX): New macro.
 863         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 864
 865 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 866
 867         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 868         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 869         * configure: Regenerated.
 870
 871 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 872
 873         * cris/configure: Regenerated.
 874
 875 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 876
 877         * cris/configure: Regenerated.
 878
 879 2006-05-05  Andreas Schwab  <schwab@suse.de>
 880
 881         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 882         * configure: Regenerate.
 883
 884         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 885         (CC_FOR_BUILD): Don't override.
 886         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 887
 888 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 889
 890         * MAINTAINERS: Add an "Authorized committers" section, and list
 891         DJ Delorie for v850.
 892
 893 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 894
 895         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 896
 897 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 898
 899         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 900         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 901         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 902         (all): Depend on rvdummy$(EXEEXT).
 903         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 904         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 905         default off.
 906         * cris/configure: Regenerate.
 907         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 908         (enum cris_interrupt_type, crisv10deliver_interrupt)
 909         (crisv32deliver_interrupt: New declarations.
 910         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 911         sim_events_tickn and set state-events member work_pending when it's
 912         time for the next event.
 913         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 914         interrupt-delivery function.
 915         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 916         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 917         * cris/devices.c: Include hw-device.h.
 918         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 919         (device_io_write_buffer): Only perform 0x900000xx-functions if
 920         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 921         call hw_io_write_buffer.  Add return 0 last in function.
 922         * cris/sim-if.c (cris_have_900000xxif): Now global.
 923         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 924         Force "-model" option, effectively.
 925         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 926         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 927
 928 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 929
 930         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 931         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 932         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 933
 934 2006-03-13  DJ Delorie  <dj@redhat.com>
 935
 936         * MAINTAINERS: Add self as m32c sim maintainer.
 937
 938 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 939
 940         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 941         mapping.
 942         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 943
 944 2006-01-23  Jim Blandy  <jimb@redhat.com>
 945
 946         Add simulator for Renesas M32C and M16C.
 947
 948         * m32c: New directory.
 949         * configure.ac: Add entry for Renesas M32C.
 950         * configure: Regenerate.
 951
 952 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 953
 954         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 955         cycle count for the current insn.
 956
 957 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 958
 959         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 960         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 961         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 962         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 963
 964 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 965
 966         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 967         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 968         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 969         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 970         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 971         cris/semcrisv32f-switch.c: Regenerate.
 972
 973 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 974
 975         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 976         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 977         TARGET_O_WRONLY.
 978         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 979         F_GETFL on fd 0, 1 and 2.
 980
 981 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 982
 983         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 984         last_open_fd, last_open_flags.
 985         * cris/traps.c: Don't include targ-vals.h.
 986         (TARGET_O_ACCMODE): Define.
 987         (cris_break_13_handler): Set new _sim_cpu members.
 988         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 989         Rearrange code as switch.  Emit "unimplemented" abort for
 990         unimplemented fcntl calls.
 991
 992         * cris/traps.c (TARGET_SYS_stat): Define.
 993         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 994         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 995
 996 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 997
 998         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 999         low 32 bits are used after an unsigned long cast.
1000
1001 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1002
1003         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1004
1005 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1006
1007         * MAINTAINERS: Update my mail address, move myself to the
1008         "Past maintainers" section.
1009
1010 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1011
1012         * configure.ac: Add igen to v850 build.
1013         * configure: Regenerate.
1014
1015 2005-04-29  Paul Brook  <paul@codesourcery.com>
1016
1017         * common/callback.c (PIPE_BUF): Provide default definition.
1018         (os_lstat): Use stat if lstat is not available on the host.
1019         (os_ftruncate): Return EINVAL if not available on the host.
1020         (os_truncate): Ditto.
1021         * common/configure.ac: Check for lstat, truncate and ftruncate.
1022         * common/configure: Regenerate.
1023         * common/config.in: Regenerate.
1024
1025 2005-04-27  Paul Brook  <paul@codesourcery.com>
1026
1027         * common/Make-common.in: Add $(EXEEXT) to "run".
1028
1029 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1030
1031         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1032         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1033         implemented.  In call to create_map, pad length argument to 8k.
1034
1035 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1036
1037         * configure.ac: Add explicit sh64 case.
1038         * configure: Regenerate.
1039
1040 2005-03-30  Paul Brook  <paul@codesourcery.com>
1041
1042         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1043
1044 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1045
1046         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1047         include cgen-ops.h in decodev10.c and decodev32.c.
1048         * cris/sim-main.h: Don't include cgen-ops.h here.
1049         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1050         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1051         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1052         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1053         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1054         cris/semcrisv32f-switch.c: Regenerate.
1055
1056         * cris/traps.c (cris_break_13_handler) <case
1057         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1058         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1059
1060 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1061
1062         * cris/configure: Regenerate.
1063
1064 2005-02-28  Jim Blandy  <jimb@redhat.com>
1065
1066         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1067         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1068         Regenerated, after change to common/aclocal.m4.
1069
1070 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1071
1072         * iq2000: New target subdirectory.
1073         * configure.ac: Add iq2000 target.
1074         * configure: Regenerate.
1075
1076 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1077
1078         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1079         (realclean, install): Fail if subdir make failed.
1080
1081 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1082
1083         * cris: New directory, simulator for Axis Communications CRIS
1084         including CRIS v32, CGEN-based.
1085         * configure.ac: Add corresponding configury.
1086         * configure: Regenerate.
1087
1088 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1089
1090         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1091         common directory.  Remove sparc*-*-* from list.
1092
1093 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1094
1095         * Makefile.in (autoconf-common autoheader-common): Add --force to
1096         autoconf and autoheader.
1097         (autoconf-common autoheader-common)
1098         (autoconf-install autoheader-install): Check for configure.ac, not
1099         configure.in.
1100         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1101         * configure: Re-generate.
1102
1103 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1104
1105         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1106         correctly calls AC_CONFIG_SUBDIRS.
1107         * configure: Re-generate.
1108
1109 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1110
1111         * i960, h8500: Delete directory.
1112
1113 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1114
1115         * d30v, fr30, mn10200, z8k: Delete directory.
1116
1117 2004-03-10  Ben Elliston  <bje@gnu.org>
1118
1119         * MAINTAINERS: Update my mail address.
1120
1121 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1122
1123         * configure.in (mips*-*-*): Configure in testsuite.
1124         * configure: Regenerate.
1125
1126 2003-10-08  Dave Brolley  <brolley@redhat.com>
1127
1128         * configure.in: Move frv handling to alphabetically correct placement.
1129
1130 2003-09-03  Andreas Schwab  <schwab@suse.de>
1131
1132         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1133
1134 2003-08-29  Dave Brolley  <brolley@redhat.com>
1135
1136         * MAINTAINERS: Add myself as maintainer of the FRV port.
1137
1138 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1139             Dave Brolley  <brolley@redhat.com>
1140
1141         * frv/: New directory, simulator for the Fujitsu FRV.
1142         * configure.in: Add frv configury.
1143         * configure: Regenerate.
1144
1145 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1146
1147         * MAINTAINERS: Update my mail address.
1148
1149 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1150
1151         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1152         maintenance.  List igen and sh maintainers.  Mention that target
1153         and global maintainers pick up the slack.
1154
1155 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1156
1157         * configure.in: Add testsuite to extra_subdirs for sh.
1158         * configure: Regenerate.
1159
1160 2003-01-23  Nick Clifton  <nickc@redhat.com>
1161
1162         * Add sh2e support:
1163
1164 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1165
1166         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1167
1168 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1169
1170         * MAINTAINERS: Update my email address.
1171
1172 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1173
1174         * w65/: Delete directory.
1175
1176 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1177
1178         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1179         * configure: Re-generate.
1180
1181 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1182
1183         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1184         * configure: Re-generate.
1185
1186 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1187
1188         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1189         id, date and host to be overriden by NAME, ID, DATE and HOST
1190         respectfully.  Use ISO dates.
1191
1192 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1193
1194         * Makefile.in (ChangeLog): New makefile variable.
1195         * README-HACKING: Mention the ChangeLog makefile variable.
1196
1197 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1198
1199         * tic80/: Delete directory.
1200
1201 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1202
1203         * MAINTAINERS: Update my email address.
1204
1205 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1206
1207         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1208
1209 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1210
1211         * MAINTAINERS: Record self as a co-maintainer of just common/.
1212
1213 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1214
1215         * MAINTAINERS: Point to GDB files describing overall maintaince
1216         and check-in procedures.
1217
1218 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1219
1220         * MAINTAINERS: Add myself for ARM portions.
1221
1222 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1223
1224         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1225         * configure: Re-generate.
1226
1227 2001-02-16  Ben Elliston  <bje@redhat.com>
1228
1229         * MAINTAINERS: Add myself for common portions.
1230
1231 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1232
1233         * MAINTAINERS: Added self and Andrew for the mips sim.
1234
1235 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1236
1237         * MAINTAINERS: Added self and Andrew for the ppc sim.
1238
1239 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1240
1241         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1242         * m68hc11: New directory.
1243         * configure.in: Add.
1244         * configure: Regenerate.
1245
1246 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1247
1248         * tic80: New directory.
1249         * configure.in: Add configury.
1250         * configure: Regenerate.
1251
1252 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1253
1254         * configure.in (extra_subdirs): Add testsuite to strongarm
1255         directories.
1256         * configure: Regenerate.
1257
1258 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1259
1260         * MAINTAINERS: New file.  Blank.
1261
1262 1999-11-18  Ben Elliston  <bje@cygnus.com>
1263
1264         * configure.in: Require autoconf 2.13 and remove obsolete
1265         invocation of AC_C_CROSS.
1266         * configure: Regenerate.
1267
1268 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1269
1270         * configure.in: Configure the testsuite directory for thumb.
1271         * configure: Regenerate.
1272
1273 1999-07-16  Ben Elliston  <bje@cygnus.com>
1274
1275         * configure.in: Configure the testsuite directory for arm.
1276         * configure: Regenerate.
1277
1278 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1279
1280         * configure.in: Add support for MCore target.
1281         * configure: Regenerate.
1282
1283 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1284
1285         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1286         RUNTEST instead of commenting out, fixes portability problem.
1287
1288 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1289
1290         * configure.in: Add support for StrongARM target.
1291         * configure: Regenerate.
1292
1293 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1294
1295         * configure.in: Require autoconf 2.12.1 or higher.
1296
1297 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1298
1299         * configure.in (i960-*-*): Add.
1300         * configure: Rebuild.
1301
1302 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1303
1304         * configure.in: Added case for fr30-*-*.
1305         * configure: Regenerated.
1306
1307 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1308
1309         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1310         to allow successful operation on Windows.
1311
1312 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1313
1314         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1315         check can be invoked recursively.
1316
1317 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1318
1319         * configure.in: Build simulator on sparclite and sparc86x targets.
1320         * configure: Regenerate.
1321
1322 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1323
1324         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1325         to autoconf and autoheader.
1326
1327 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1328
1329         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1330         ../common' to autoconf and autoheader.  Unconditionally run
1331         autoconf in every subdir.
1332         (autoconf-changelog autoheader-changelog): Unconditionally run
1333         commands in every subdir.
1334         (autoconf-install autoheader-install): Likewise.
1335
1336 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1337
1338         * Makefile.in:  Get SHELL from configure.
1339         * (FLAGS_TO_PASS):  Pass down SHELL.
1340         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1341         NT native builds.
1342
1343 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1344
1345         * configure.in (extra_subdirs): Enable igen for mn10300.
1346         * configure: Re-generate.
1347
1348 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1349
1350         * configure.in (extra_subdirs): Add support for thumb target.
1351
1352         * configure (extra_subdirs): Add support for thumb target.
1353
1354 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1355
1356         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1357         target.
1358         * configure: Regenerate.
1359
1360 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1361
1362         * configure.in (extra_subdirs): v850ea needs igen.
1363         * configure: Re-generate.
1364
1365 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1366
1367         * configure.in (testdir): When a testsuite directory, add that to
1368         the list of confdirs.
1369
1370 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1371
1372         * configure.in (extra_subdirs): Enable igen ready for V850.
1373
1374 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1375
1376         * configure.in (w65-*-*, only_if_enabled): Set.
1377         * configure: Re-generate.
1378
1379 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1380
1381         * configure.in (sparc*-*-*, only_if_enabled): Set
1382         only_if_enabled=yes.  Check only_if_enabled before enabling a
1383         simulator.
1384         * configure: Regenerate.
1385
1386 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1387
1388         * configure.in (extra_subdirs): Add v850e target.
1389
1390 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1391
1392         * configure.in (extra_subdirs): Add v850ea target.
1393
1394 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1395
1396         * configure.in (sparc*-*-*): Don't build erc32.
1397         * configure: Regenerate.
1398
1399 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1400
1401         * configure.in (m32r-*-*): New target.
1402         * configure: Regenerate.
1403
1404         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1405
1406 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1407
1408         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1409         thought that .NOEXPORT was the default target.
1410
1411 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1412
1413         * Makefile.in (clean mostlyclean): Restore targets accidentally
1414         deleted in earlier change.
1415
1416 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1417
1418         * Makefile.in (autoheader-common, autoheader-changelog,
1419         autoheader-install): Perform autoheader in addition to autoconf.
1420
1421 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1422
1423         * Makefile.in (autoconf-install): New target.
1424         (autoconf-changelog): Try different way to obtain user name.
1425
1426 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1427
1428         * Makefile.in (autoconf-changelog): New target, update
1429         ChangeLog for all subdirectories - normally used after
1430         autoconf-common target.
1431
1432 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1433
1434         * configure.in (extra_subdirs): Include testsuite for d30v.
1435         * configure: Regenerate.
1436
1437         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1438         ../gdb/Makefile.in
1439         (check): New rules - drive the testsuite.
1440
1441 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1442
1443         * configure.in: Add mn10200 configure lines accidentally
1444         removed.
1445         * configure: Regenerated.
1446
1447 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1448
1449         * configure.in (extra_subdirs): Generalize common sub directory
1450         into a list.
1451         (extra_subdirs): For d30v add igen to the list to be built.
1452
1453 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1454
1455         * configure.in (d30v): New target.
1456         * configure: Regenerated.
1457
1458 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1459
1460         * configure.in: Don't require GCC to build the mn10200
1461         simulator anymore.
1462         * configure: Rebuilt.
1463
1464 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1465
1466         * configure.in: Don't configure any subdirs if no simulator
1467         is being built.  Don't use erc32 for sparc64.
1468         * configure: Regenerated.
1469
1470 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1471
1472         * Makefile.in (autoconf-common): New target.
1473         * configure.in: Do configure common.
1474         * configure: Regenerated.
1475
1476 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1477
1478         * configure configure.in:  Don't configure common anymore.  Files
1479         from common are now built in the individual simualtor directories.
1480         This fixes problems with the WinGDB build procedure.
1481
1482 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1483
1484         * configure: Enable the mn10200 simulator.
1485
1486 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1487
1488         * configure.in (configdirs): Add common.
1489         * configure: Regenerated.
1490
1491 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1492
1493         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1494         system V based targets.
1495         * configure: Regenerate.
1496
1497 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1498
1499         * configure.in (--enable-sim-powerpc): Delete.
1500         (--enable-sim): Add.
1501         * configure: Regenerated.
1502
1503 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1504
1505         * configure.in: Only build the V850 simulator if
1506         we are using gcc.
1507         * configure: Rebuild.
1508
1509 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1510
1511         * configure.in: Do build erc32 for DOS and Windows hosts.
1512         * configure: Rebuild.
1513
1514 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1515
1516         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1517         be inherited from the parent.  Remove INSTALL_XFORM and
1518         INSTALL_XFORM1.  Make INSTALL be set from configure.
1519
1520 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1521
1522         * configure.in: Only build the MIPS simulator if we are using
1523         gcc.
1524         * configure: Rebuild.
1525
1526 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1527
1528         * configure.in (v850-*-*): Added V850 simulator.
1529
1530 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1531
1532         * configure.in (d10v-*-*): Added D10V simulator.
1533
1534 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1535
1536         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1537         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1538         (docdir): Removed.
1539         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1540         (AC_PROG_INSTALL): Added.
1541         * configure: Rebuilt.
1542
1543 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1544
1545         * configure.in: Only configure erc32 if using gcc.
1546         * configure: Rebuild.
1547
1548 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1549
1550         * configure.in (sim_target): Build PowerPC simulator for powerpc
1551         System V.4, Solaris, and Elf targets.
1552         * configure: Regenerate with autoconf 2.10.
1553
1554 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1555
1556         * configure.in: Only built erc32 simulator on Unix hosts as it
1557         uses pseudo ttys.
1558         * configure: Regenerated with autoconf 2.8.
1559
1560 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1561
1562         * erc32: Sparc simulator from the ESA.
1563
1564 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1565
1566         From: Miles Bader  <miles@gnu.ai.mit.edu>
1567         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1568         * configure: Regenerate using autoconf.
1569
1570 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1571
1572         * Makefile.in (install): Fix typo.
1573
1574 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1575
1576         * configure: Regenerate with autoconf 2.7.
1577
1578         * Makefile.in (all): Simplify.
1579         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1580         as in the all target.
1581         (distclean, maintainer-clean, realclean): Likewise.
1582         (install): Likewise.
1583
1584 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1585
1586         * Makefile.in (all): Remove extra '\' char from shell script.
1587
1588 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1589
1590         * Makefile.in (all): Avoid a for loop with zero elements, even if
1591         the loop will not be executed because of an if statement.
1592
1593 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1594
1595         * Makefile.in (install): Add missing semicolon in "fi \".
1596
1597 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1598
1599         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1600         defaults from configure.
1601
1602         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1603         configure defaults.
1604         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1605         if either --enable-sim-powerpc is used, or the host compiler is
1606         GCC.
1607
1608 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1609
1610         * configure.in (mips*-*-*): Added "mips" simulator target.
1611         * configure: Re-generated.
1612
1613 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1614
1615         * Makefile.in (BISON): Remove macro.
1616         (FLAGS_TO_PASS): Remove BISON.
1617
1618 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1619
1620         * configure.in:  Explicitly `exit 0' for broken shells.
1621         * configure:  Rebuilt.
1622
1623 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1624
1625         * common/run.c (main): Initialize the callbacks.
1626
1627 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1628
1629         * Makefile.in (maintainer-clean): New synonym for realclean.
1630
1631 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1632
1633         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1634         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1635
1636 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1637
1638         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1639         <cagney@highland.com.au>.
1640         * configure: Regnerate from configure.in.
1641
1642 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1643
1644         * Update all FSF addresses except those in COPYING* files.
1645
1646 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1647
1648         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1649         submakes either default or passed in value.
1650
1651 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1652
1653         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1654           install): Changed targets so that they descend all
1655           subdirectories in $(SUBDIRS).
1656           (*-all, *-clean, *-install): Removed targets.
1657
1658         * configure.in: Don't bother with target makefile fragments, they
1659           are no longer needed.
1660         * configure: regenerated.
1661
1662         * Makefile.in, configure.in: converted to autoconf.
1663         * configure: New file, generated with autconf 2.4.
1664
1665 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1666
1667         * Makefile.in: Support ARM.
1668         * configure.in: Ditto.
1669
1670 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1671
1672         * Makefile.in: Support W65.
1673         * configure.in: Ditto.
1674
1675 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1676
1677         * Makefile.in: Add TAGS target.
1678
1679 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1680
1681         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1682           install-h8300, clean-h8300, all-h8500, install-h8500,
1683           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1684           recursion lines.
1685
1686 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1687
1688         * Makefile.in: remove endian.h trace from h8500
1689
1690 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1691
1692         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1693
1694 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1695
1696         * Makefile.in: make all of the all-* target (except all-nothing)
1697         depend on endian.h, so that if we're not building a simulator, we
1698         don't built endian
1699
1700 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1701
1702         * Makefile.in (check, installcheck): Added dummy targets.
1703
1704 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1705
1706         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1707         explicitly make it, since some makes apparently don't work with
1708         VPATH and .c to executable rules (SunOS make for example).
1709
1710 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1711
1712         * Makefile.in (endian): Add explicit rule for broken makes.
1713
1714 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1715
1716         * Makefile.in (info, install-info): New targets.
1717         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1718         level Makefile.
1719
1720 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1721
1722         * Makefile.in (endian.h): build endian.h via a temporary file so
1723           that we don't leave an incomplete file lying around on
1724           interrupted builds.
1725           (clean): remove endian, e.h, and endian.h.
1726
1727 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1728
1729         * Makefile.in, configure.in: if target isn't supported, build a
1730         harmless makefile.
1731
1732