sim/bfin/ChangeLog

   1 2011-06-18  Robin Getz  <robin.getz@analog.com>
   2
   3         * bfin-sim.c (extract_mult): When mmod is M_IH, change the order
   4         from round/saturate to saturate/round/saturate.
   5
   6 2011-06-18  Robin Getz  <robin.getz@analog.com>
   7
   8         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
   9         (decode_macfunc): Likewise when mmod is M_IH.
  10
  11 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
  12
  13         * interp.c (sim_create_inferior): Change free to freeargv.
  14
  15 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  16
  17         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
  18         (bf537_port): Define applicable devices with PORT to the glue-or
  19         devices instead of SIC.
  20         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
  21         Only parse reg/type when the device has an address.  Move the call
  22         to dv_bfin_hw_port_parse up before slash check.
  23
  24 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  25
  26         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
  27         BFIN_SIC_TO_CEC_PORTS definition.
  28         (SIC_PORTS): New define.
  29         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
  30         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
  31         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
  32         Delete old layouts.
  33         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
  34         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
  35         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
  36         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
  37         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
  38         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
  39         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
  40         * machs.c (bfin_port_layout): New structure.
  41         (bfin_model_data): Add new "port" and "port_count" members.
  42         (PORT, SIC): New defines.
  43         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
  44         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
  45         Move and redefine port layout from dv-bfin_sic.c to here.
  46         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
  47         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
  48         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
  49         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
  50         bf548_port, bf549_port): New defines.
  51         (bfin_model_data): Link in new bfin_port_layout.port member.
  52         (dv_bfin_hw_port_parse): New function.
  53         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
  54         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
  55         bfin_sic links with new dv_bfin_hw_port_parse function.
  56
  57 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
  58
  59         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
  60
  61 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  62
  63         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
  64
  65 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  66
  67         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
  68         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
  69         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
  70         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
  71         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
  72         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
  73         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
  74         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
  75         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
  76         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
  77         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
  78         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
  79         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
  80         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
  81         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
  82         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
  83         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
  84         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
  85         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
  86         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
  87         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
  88         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
  89         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
  90         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
  91         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
  92         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
  93         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
  94         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
  95         * machs.h: ... here.
  96         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
  97
  98 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  99
 100         * Makefile.in (dv-bfin_pfmon.o): New target.
 101         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 102         * configure: Regenerated.
 103         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 104         * machs.c: Add include new bfin_pfmon.h.
 105         (bfin_core_dev): Add pfmon.
 106
 107 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * machs.c (bf526_roms): Add a region with rev of 2.
 110         (bf54x_roms): Add regions with rev of 4.
 111         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 112         bf54x_l1-0.4.h headers.
 113         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 114         New header files.
 115
 116 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 119         check for SP reg.
 120
 121 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 122
 123         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 124         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 125         and count fields of the uart.
 126         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 127         and bfin_uart_get_next_byte.
 128         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 129         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 130         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 131         (bfin_uart_get_next_byte): Likewise.
 132         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 133         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 134         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 135
 136 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 137
 138         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 139         from uart->lsr before setting them.
 140
 141 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 144         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 145         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 146         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 147         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 148         Likewise.
 149
 150 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 151
 152         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 153         (bfin_gpio_io_write_buffer): Store the current port state into
 154         "data", and call bfin_gpio_forward_ouput when the data or dir
 155         MMRs are updated.
 156         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 157
 158 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 159
 160         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 161         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 162         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 163         mask a or mask b MMRs are written.
 164         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 165         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 166         When handling level gpios, clear/set the bit in int_state rather
 167         than returning immediately.  Call bfin_gpio_forward_ints instead
 168         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 169
 170 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 171
 172         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 173         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 174         BYTEUNPACK.
 175         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 176         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 177
 178 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 179
 180         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 181         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 182         and BYTEUNPACK insns.
 183
 184 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 185
 186         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 187         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 188         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 189         in the trace output, and call the new bfin_sic_port_event func.
 190
 191 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 192
 193         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 194
 195 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 196
 197         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 198         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 199
 200 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 201
 202         * configure: Regenerate after common/aclocal.m4 changes.
 203
 204 2011-03-28  Robin Getz  <robin.getz@analog.com>
 205
 206         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 207         and add to casted low 16bits of A0.L and store in val0.  Cast high
 208         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 209         store in val1.  Delete bit checks of val0 and val1.
 210
 211 2011-03-26  Robin Getz  <robin.getz@analog.com>
 212
 213         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 214         the result was 0x80000000 for RND12 subtraction.
 215
 216 2011-03-26  Robin Getz  <robin.getz@analog.com>
 217
 218         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 219
 220 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 221
 222         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 223         major code flow point.
 224         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 225         before calling hw_port_event on ourselves.
 226         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 227         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 228         at the start of the function.
 229
 230 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 231
 232         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 233         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 234         Invert port->both bit check.
 235
 236 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 237
 238         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 239         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 240
 241 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 242
 243         * TODO: Document some known SIC issues.
 244
 245 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 246
 247         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 248         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 249         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 250         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 251         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 252         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 253         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 254         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 255         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 256         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 257         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 258         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 259         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 260         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 261
 262 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 263
 264         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 265
 266 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 267
 268         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 269
 270 2011-03-23  Robin Getz  <robin.getz@analog.com>
 271
 272         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 273         value for the VIT_MAX insn, and mask off the result when done.
 274
 275 2011-03-23  Robin Getz  <robin.getz@analog.com>
 276
 277         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 278         and set A0 to a0_lo when up_lo is false.
 279
 280 2011-03-23  Robin Getz  <robin.getz@analog.com>
 281
 282         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 283         saturate_s40, and use the v parameter to update the AV bit.  Set the
 284         AC bit only when the final result is 0.
 285
 286 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 287
 288         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 289         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 290         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 291         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 292         Encode ids with the ENC macro.
 293         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 294         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 295         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 296         (bfin_sic_533_port_event): Delete.
 297         (bfin_sic_finish): Call set_hw_port_event with
 298         bfin_sic_537_port_event for BF533 and BF59x targets.
 299
 300 2011-03-23  Robin Getz  <robin.getz@analog.com>
 301
 302         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 303         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 304
 305 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 306
 307         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 308         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 309         Change bfin_gpio addresses from f/g/h to 5/6/7.
 310         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 311
 312 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 313
 314         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 315         * configure: Regenerate.
 316         * config.in: Regenerate.
 317         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 318         kill or pread.
 319
 320 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 321
 322         * Makefile.in (dv-bfin_gpio.o): New target.
 323         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 324         * configure: Regenerate.
 325         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 326         * machs.c: Include dv-bfin_gpio.h.
 327         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 328         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 329         Delete GPIO memory stubs.
 330         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 331         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 332         peripheral devices.
 333         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 334
 335 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 336
 337         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 338         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 339         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 340         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 341         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 342         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 343         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 344         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 345         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 346         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 347         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 348         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 349         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 350         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 351         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 352         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 353         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 354
 355 2011-03-15  Robin Getz  <robin.getz@analog.com>
 356
 357         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 358         and subs.
 359
 360 2011-03-15  Robin Getz  <robin.getz@analog.com>
 361
 362         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 363
 364 2011-03-15  Robin Getz  <robin.getz@analog.com>
 365
 366         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 367         high bit is set after extract_mult.
 368         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 369         functions.  Use these to update the AN bit.
 370
 371 2011-03-15  Robin Getz  <robin.getz@analog.com>
 372
 373         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 374         the extract_mult functions.  Include these when updating the V, VS,
 375         and V_COPY bits.
 376
 377 2011-03-15  Robin Getz  <robin.getz@analog.com>
 378
 379         * bfin-sim.c (astat_names): New global bit array.
 380         (decode_CC2stat_0): Delete local astat_name and astat_names.
 381         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 382         Print out ASTAT bit values when checking an ASTAT register.
 383
 384 2010-03-15  Robin Getz  <robin.getz@analog.com>
 385
 386         * bfin-sim.c (extract_mult): Handle M_IU.
 387
 388 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 389
 390         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 391         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 392         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 393         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 394         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 395         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 396         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 397         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 398         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 399         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 400         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 401         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 402         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 403         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 404         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 405         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 406         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 407         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 408         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 409         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 410         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 411         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 412         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 413         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 414         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 415         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 416         tconfig.in: New Blackfin port.