sim/bfin/ChangeLog

   1 2011-10-19  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure: Regenerate after common/acinclude.m4 update.
   4
   5 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * configure.ac: Change include to common/acinclude.m4.
   8         * aclocal.m4, configure: Regenerate.
   9
  10 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
  11
  12         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
  13         call.  Replace common.m4 include with SIM_AC_COMMON.
  14         * configure: Regenerate.
  15
  16 2011-09-28  Mike Frysinger  <vapier@gentoo.org>
  17
  18         * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
  19
  20 2011-07-05  Mike Frysinger  <vapier@gentoo.org>
  21
  22         * interp.c (sim_do_command): Delete.
  23
  24 2011-07-01  Mike Frysinger  <vapier@gentoo.org>
  25
  26         * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
  27         stat_map_32 and stat_map_64.
  28         (cb_libgloss_stat_map_32): New stat map.
  29         (stat_map_32, stat_map_64): New stat map pointers.
  30         (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
  31         stat_map_64 to cb_linux_stat_map_64.
  32         (bfin_virtual_init): New function.
  33         (sim_create_inferior): Call bfin_virtual_init for all other envs.
  34
  35 2011-06-22  Mike Frysinger  <vapier@gentoo.org>
  36
  37         * interp.c (bfin_syscall): Delete old comment.  Set dreg 1 to
  38         sc.result2 and dreg 2 to sc.errcode.
  39
  40 2011-06-18  Robin Getz  <robin.getz@analog.com>
  41
  42         * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
  43         else set it.  Set ASTAT[AVS] if val is 0.  Do this for LSHIFT and
  44         ASHIFT accumulator insns.
  45
  46 2011-06-18  Robin Getz  <robin.getz@analog.com>
  47
  48         * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
  49         (lshiftrt): Likewise.
  50
  51 2011-06-18  Robin Getz  <robin.getz@analog.com>
  52
  53         * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
  54         rather than get_extended_acc in LSHIFT insns.
  55
  56 2011-06-18  Robin Getz  <robin.getz@analog.com>
  57
  58         * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
  59         Check MM once when mmod is M_FU to match M_TFU better.
  60
  61 2011-06-18  Robin Getz  <robin.getz@analog.com>
  62
  63         * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
  64         32, perform a left shift.  Update the corresponding AV bit.  Set
  65         AZ when the low 32bits are also zero.
  66
  67 2011-06-18  Robin Getz  <robin.getz@analog.com>
  68
  69         * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
  70         call lshift only when count is positive.  Otherwise, call ashiftrt.
  71         With arithmetic right shift insns, call ashiftrt when the value is
  72         small enough, otherwise call lshift.
  73
  74 2011-06-18  Robin Getz  <robin.getz@analog.com>
  75
  76         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
  77         mmod is M_IH rather than computing the result by hand.
  78
  79 2011-06-18  Robin Getz  <robin.getz@analog.com>
  80
  81         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
  82         before saturation, set sat when more cases saturate, and set the
  83         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
  84         M_W32, change the max values compared against.
  85         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
  86         when processing MAC1 and pass v_0 when processing MAC0.  Combine
  87         the results into the V/VS ASTAT bits.
  88
  89 2011-06-18  Robin Getz  <robin.getz@analog.com>
  90
  91         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
  92         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
  93         is M_TFU.
  94
  95 2011-06-18  Robin Getz  <robin.getz@analog.com>
  96
  97         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
  98         allow MM to sign extend all the time.
  99         (decode_macfunc): Likewise.  Drop sign extension of unsigned
 100         values.
 101
 102 2011-06-18  Robin Getz  <robin.getz@analog.com>
 103
 104         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
 105         (decode_macfunc): Likewise when mmod is M_IH.
 106
 107 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * interp.c (sim_create_inferior): Change free to freeargv.
 110
 111 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 112
 113         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
 114         (bf537_port): Define applicable devices with PORT to the glue-or
 115         devices instead of SIC.
 116         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
 117         Only parse reg/type when the device has an address.  Move the call
 118         to dv_bfin_hw_port_parse up before slash check.
 119
 120 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 121
 122         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
 123         BFIN_SIC_TO_CEC_PORTS definition.
 124         (SIC_PORTS): New define.
 125         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 126         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 127         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 128         Delete old layouts.
 129         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
 130         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
 131         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
 132         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
 133         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
 134         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
 135         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
 136         * machs.c (bfin_port_layout): New structure.
 137         (bfin_model_data): Add new "port" and "port_count" members.
 138         (PORT, SIC): New defines.
 139         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
 140         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
 141         Move and redefine port layout from dv-bfin_sic.c to here.
 142         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
 143         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
 144         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
 145         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
 146         bf548_port, bf549_port): New defines.
 147         (bfin_model_data): Link in new bfin_port_layout.port member.
 148         (dv_bfin_hw_port_parse): New function.
 149         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
 150         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
 151         bfin_sic links with new dv_bfin_hw_port_parse function.
 152
 153 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
 154
 155         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
 156
 157 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 158
 159         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
 160
 161 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 162
 163         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
 164         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
 165         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
 166         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
 167         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
 168         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
 169         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
 170         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
 171         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
 172         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
 173         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
 174         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
 175         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
 176         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
 177         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
 178         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
 179         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
 180         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
 181         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
 182         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
 183         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
 184         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
 185         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
 186         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
 187         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
 188         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
 189         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
 190         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
 191         * machs.h: ... here.
 192         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
 193
 194 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 195
 196         * Makefile.in (dv-bfin_pfmon.o): New target.
 197         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 198         * configure: Regenerated.
 199         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 200         * machs.c: Add include new bfin_pfmon.h.
 201         (bfin_core_dev): Add pfmon.
 202
 203 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 204
 205         * machs.c (bf526_roms): Add a region with rev of 2.
 206         (bf54x_roms): Add regions with rev of 4.
 207         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 208         bf54x_l1-0.4.h headers.
 209         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 210         New header files.
 211
 212 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 213
 214         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 215         check for SP reg.
 216
 217 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 218
 219         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 220         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 221         and count fields of the uart.
 222         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 223         and bfin_uart_get_next_byte.
 224         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 225         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 226         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 227         (bfin_uart_get_next_byte): Likewise.
 228         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 229         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 230         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 231
 232 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 233
 234         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 235         from uart->lsr before setting them.
 236
 237 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 238
 239         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 240         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 241         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 242         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 243         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 244         Likewise.
 245
 246 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 247
 248         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 249         (bfin_gpio_io_write_buffer): Store the current port state into
 250         "data", and call bfin_gpio_forward_ouput when the data or dir
 251         MMRs are updated.
 252         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 253
 254 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 255
 256         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 257         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 258         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 259         mask a or mask b MMRs are written.
 260         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 261         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 262         When handling level gpios, clear/set the bit in int_state rather
 263         than returning immediately.  Call bfin_gpio_forward_ints instead
 264         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 265
 266 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 267
 268         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 269         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 270         BYTEUNPACK.
 271         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 272         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 273
 274 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 275
 276         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 277         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 278         and BYTEUNPACK insns.
 279
 280 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 281
 282         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 283         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 284         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 285         in the trace output, and call the new bfin_sic_port_event func.
 286
 287 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 288
 289         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 290
 291 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 292
 293         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 294         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 295
 296 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 297
 298         * configure: Regenerate after common/aclocal.m4 changes.
 299
 300 2011-03-28  Robin Getz  <robin.getz@analog.com>
 301
 302         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 303         and add to casted low 16bits of A0.L and store in val0.  Cast high
 304         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 305         store in val1.  Delete bit checks of val0 and val1.
 306
 307 2011-03-26  Robin Getz  <robin.getz@analog.com>
 308
 309         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 310         the result was 0x80000000 for RND12 subtraction.
 311
 312 2011-03-26  Robin Getz  <robin.getz@analog.com>
 313
 314         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 315
 316 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 317
 318         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 319         major code flow point.
 320         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 321         before calling hw_port_event on ourselves.
 322         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 323         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 324         at the start of the function.
 325
 326 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 327
 328         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 329         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 330         Invert port->both bit check.
 331
 332 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 333
 334         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 335         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 336
 337 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 338
 339         * TODO: Document some known SIC issues.
 340
 341 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 342
 343         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 344         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 345         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 346         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 347         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 348         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 349         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 350         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 351         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 352         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 353         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 354         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 355         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 356         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 357
 358 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 359
 360         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 361
 362 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 363
 364         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 365
 366 2011-03-23  Robin Getz  <robin.getz@analog.com>
 367
 368         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 369         value for the VIT_MAX insn, and mask off the result when done.
 370
 371 2011-03-23  Robin Getz  <robin.getz@analog.com>
 372
 373         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 374         and set A0 to a0_lo when up_lo is false.
 375
 376 2011-03-23  Robin Getz  <robin.getz@analog.com>
 377
 378         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 379         saturate_s40, and use the v parameter to update the AV bit.  Set the
 380         AC bit only when the final result is 0.
 381
 382 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 383
 384         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 385         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 386         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 387         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 388         Encode ids with the ENC macro.
 389         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 390         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 391         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 392         (bfin_sic_533_port_event): Delete.
 393         (bfin_sic_finish): Call set_hw_port_event with
 394         bfin_sic_537_port_event for BF533 and BF59x targets.
 395
 396 2011-03-23  Robin Getz  <robin.getz@analog.com>
 397
 398         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 399         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 400
 401 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 402
 403         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 404         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 405         Change bfin_gpio addresses from f/g/h to 5/6/7.
 406         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 407
 408 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 409
 410         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 411         * configure: Regenerate.
 412         * config.in: Regenerate.
 413         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 414         kill or pread.
 415
 416 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 417
 418         * Makefile.in (dv-bfin_gpio.o): New target.
 419         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 420         * configure: Regenerate.
 421         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 422         * machs.c: Include dv-bfin_gpio.h.
 423         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 424         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 425         Delete GPIO memory stubs.
 426         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 427         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 428         peripheral devices.
 429         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 430
 431 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 432
 433         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 434         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 435         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 436         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 437         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 438         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 439         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 440         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 441         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 442         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 443         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 444         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 445         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 446         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 447         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 448         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 449         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 450
 451 2011-03-15  Robin Getz  <robin.getz@analog.com>
 452
 453         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 454         and subs.
 455
 456 2011-03-15  Robin Getz  <robin.getz@analog.com>
 457
 458         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 459
 460 2011-03-15  Robin Getz  <robin.getz@analog.com>
 461
 462         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 463         high bit is set after extract_mult.
 464         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 465         functions.  Use these to update the AN bit.
 466
 467 2011-03-15  Robin Getz  <robin.getz@analog.com>
 468
 469         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 470         the extract_mult functions.  Include these when updating the V, VS,
 471         and V_COPY bits.
 472
 473 2011-03-15  Robin Getz  <robin.getz@analog.com>
 474
 475         * bfin-sim.c (astat_names): New global bit array.
 476         (decode_CC2stat_0): Delete local astat_name and astat_names.
 477         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 478         Print out ASTAT bit values when checking an ASTAT register.
 479
 480 2010-03-15  Robin Getz  <robin.getz@analog.com>
 481
 482         * bfin-sim.c (extract_mult): Handle M_IU.
 483
 484 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 485
 486         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 487         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 488         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 489         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 490         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 491         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 492         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 493         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 494         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 495         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 496         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 497         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 498         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 499         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 500         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 501         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 502         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 503         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 504         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 505         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 506         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 507         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 508         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 509         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 510         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 511         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 512         tconfig.in: New Blackfin port.