1 2011-04-26 Mike Frysinger <vapier@gentoo.org>
3 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
4 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
5 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
6 mask a or mask b MMRs are written.
7 (bfin_gpio_port_event): When handling edge gpios, set the bit in
8 int_state, call bfin_gpio_forward_ints, and then clear the bit.
9 When handling level gpios, clear/set the bit in int_state rather
10 than returning immediately. Call bfin_gpio_forward_ints instead
11 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
13 2011-04-16 Mike Frysinger <vapier@gentoo.org>
15 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
16 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
18 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
19 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
21 2011-04-14 Mike Frysinger <vapier@gentoo.org>
23 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
24 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
27 2011-04-11 Mike Frysinger <vapier@gentoo.org>
29 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
30 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
31 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
32 in the trace output, and call the new bfin_sic_port_event func.
34 2011-04-11 Mike Frysinger <vapier@gentoo.org>
36 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
38 2011-04-01 Mike Frysinger <vapier@gentoo.org>
40 * dv-bfin_otp.c (bfin_otp_ports): Declare.
41 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
43 2011-03-29 Mike Frysinger <vapier@gentoo.org>
45 * configure: Regenerate after common/aclocal.m4 changes.
47 2011-03-28 Robin Getz <robin.getz@analog.com>
49 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
50 and add to casted low 16bits of A0.L and store in val0. Cast high
51 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
52 store in val1. Delete bit checks of val0 and val1.
54 2011-03-26 Robin Getz <robin.getz@analog.com>
56 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
57 the result was 0x80000000 for RND12 subtraction.
59 2011-03-26 Robin Getz <robin.getz@analog.com>
61 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
63 2011-03-24 Mike Frysinger <vapier@gentoo.org>
65 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
66 major code flow point.
67 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
68 before calling hw_port_event on ourselves.
69 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
70 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
71 at the start of the function.
73 2011-03-24 Mike Frysinger <vapier@gentoo.org>
75 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
76 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
77 Invert port->both bit check.
79 2011-03-24 Mike Frysinger <vapier@gentoo.org>
81 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
82 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
84 2011-03-23 Mike Frysinger <vapier@gentoo.org>
86 * TODO: Document some known SIC issues.
88 2011-03-23 Mike Frysinger <vapier@gentoo.org>
90 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
91 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
92 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
93 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
94 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
95 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
96 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
97 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
98 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
99 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
100 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
101 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
102 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
103 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
105 2011-03-23 Mike Frysinger <vapier@gentoo.org>
107 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
109 2011-03-23 Mike Frysinger <vapier@gentoo.org>
111 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
113 2011-03-23 Robin Getz <robin.getz@analog.com>
115 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
116 value for the VIT_MAX insn, and mask off the result when done.
118 2011-03-23 Robin Getz <robin.getz@analog.com>
120 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
121 and set A0 to a0_lo when up_lo is false.
123 2011-03-23 Robin Getz <robin.getz@analog.com>
125 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
126 saturate_s40, and use the v parameter to update the AV bit. Set the
127 AC bit only when the final result is 0.
129 2011-03-23 Mike Frysinger <vapier@gentoo.org>
131 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
132 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
133 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
134 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
135 Encode ids with the ENC macro.
136 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
137 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
138 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
139 (bfin_sic_533_port_event): Delete.
140 (bfin_sic_finish): Call set_hw_port_event with
141 bfin_sic_537_port_event for BF533 and BF59x targets.
143 2011-03-23 Robin Getz <robin.getz@analog.com>
145 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
146 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
148 2011-03-23 Mike Frysinger <vapier@gentoo.org>
150 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
151 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
152 Change bfin_gpio addresses from f/g/h to 5/6/7.
153 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
155 2011-03-17 Mike Frysinger <vapier@gentoo.org>
157 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
158 * configure: Regenerate.
159 * config.in: Regenerate.
160 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
163 2011-03-15 Mike Frysinger <vapier@gentoo.org>
165 * Makefile.in (dv-bfin_gpio.o): New target.
166 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
167 * configure: Regenerate.
168 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
169 * machs.c: Include dv-bfin_gpio.h.
170 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
171 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
172 Delete GPIO memory stubs.
173 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
174 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
176 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
178 2011-03-15 Mike Frysinger <vapier@gentoo.org>
180 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
181 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
182 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
183 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
184 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
185 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
186 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
187 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
188 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
189 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
190 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
191 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
192 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
193 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
194 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
195 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
196 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
198 2011-03-15 Robin Getz <robin.getz@analog.com>
200 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
203 2011-03-15 Robin Getz <robin.getz@analog.com>
205 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
207 2011-03-15 Robin Getz <robin.getz@analog.com>
209 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
210 high bit is set after extract_mult.
211 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
212 functions. Use these to update the AN bit.
214 2011-03-15 Robin Getz <robin.getz@analog.com>
216 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
217 the extract_mult functions. Include these when updating the V, VS,
220 2011-03-15 Robin Getz <robin.getz@analog.com>
222 * bfin-sim.c (astat_names): New global bit array.
223 (decode_CC2stat_0): Delete local astat_name and astat_names.
224 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
225 Print out ASTAT bit values when checking an ASTAT register.
227 2010-03-15 Robin Getz <robin.getz@analog.com>
229 * bfin-sim.c (extract_mult): Handle M_IU.
231 2011-03-05 Mike Frysinger <vapier@gentoo.org>
233 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
234 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
235 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
236 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
237 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
238 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
239 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
240 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
241 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
242 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
243 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
244 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
245 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
246 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
247 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
248 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
249 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
250 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
251 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
252 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
253 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
254 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
255 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
256 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
257 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
258 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
259 tconfig.in: New Blackfin port.