1 2021-06-19 Mike Frysinger <vapier@gentoo.org>
3 * configure: Regenerate.
5 2021-06-18 Mike Frysinger <vapier@gentoo.org>
7 * aclocal.m4, configure: Regenerate.
9 2021-06-18 Mike Frysinger <vapier@gentoo.org>
11 * Makefile.in (SIM_WERROR_CFLAGS): New variable.
12 * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
13 * configure: Regenerate.
15 2021-06-17 Mike Frysinger <vapier@gentoo.org>
17 * configure: Regenerate.
19 2021-06-16 Mike Frysinger <vapier@gentoo.org>
21 * configure: Regenerate.
23 2021-06-16 Mike Frysinger <vapier@gentoo.org>
25 * configure: Regenerate.
28 2021-06-15 Mike Frysinger <vapier@gentoo.org>
30 * config.in, configure: Regenerate.
32 2021-06-14 Mike Frysinger <vapier@gentoo.org>
34 * interf.c (sim_open) [F_GETFL]: Only set termsave.
35 (sim_close) [F_SETFL]: Only call fcntl.
36 * sis.c (main) [F_GETFL]: Only set termsave.
38 2021-06-14 Mike Frysinger <vapier@gentoo.org>
40 * erc32.c [HAVE_TERMIOS_H]: Include termios.h and declare ioc1,
41 ioc2, iocold1, & iocold2.
42 (init_stdio) [HAVE_TERMIOS_H]: Only call tcsetattr.
43 (restore_stdio) [HAVE_TERMIOS_H]: Likewise.
44 (port_init) [HAVE_TERMIOS_H]: Only call tcgetattr.
46 2021-06-12 Mike Frysinger <vapier@gentoo.org>
48 * erc32.c (uart_rx): Change caddr_t to void*.
49 (uart_intr): Likewise.
50 (wdog_intr): Likewise.
54 2021-06-12 Mike Frysinger <vapier@gentoo.org>
56 * Makefile.in: Add $(EXEEXT) to sis.
58 2021-06-12 Mike Frysinger <vapier@gentoo.org>
60 * aclocal.m4, config.in, configure: Regenerate.
62 2021-06-12 Mike Frysinger <vapier@gentoo.org>
64 * config.in, configure: Regenerate.
66 2021-05-16 Mike Frysinger <vapier@gentoo.org>
68 * erc32.c, exec.c, float.c, func.c, help.c, interf.c, sis.c: Replace
69 config.h include with defs.h.
70 * sis.h: Delete config.h include.
72 2021-05-16 Mike Frysinger <vapier@gentoo.org>
74 * config.in, configure: Regenerate.
76 2021-05-14 Mike Frysinger <vapier@gentoo.org>
78 * interf.c: Update include path.
81 2021-05-04 Mike Frysinger <vapier@gentoo.org>
83 * configure: Regenerate.
85 2021-05-04 Mike Frysinger <vapier@gentoo.org>
87 * func.c (bfd_load): Use BFD_VMA_FMT.
89 2021-05-01 Mike Frysinger <vapier@gentoo.org>
91 * config.in, configure: Regenerate.
93 2021-04-26 Mike Frysinger <vapier@gentoo.org>
95 * aclocal.m4, config.in, configure: Regenerate.
97 2021-04-22 Tom Tromey <tom@tromey.com>
99 * configure, config.in: Rebuild.
101 2021-04-22 Tom Tromey <tom@tromey.com>
103 * configure: Rebuild.
105 2021-04-21 Mike Frysinger <vapier@gentoo.org>
107 * aclocal.m4: Regenerate.
109 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca>
111 * configure: Regenerate.
113 2021-04-18 Mike Frysinger <vapier@gentoo.org>
115 * configure: Regenerate.
117 2021-04-15 John Baldwin <jhb@FreeBSD.org>
119 * Makefile.in (READLINE_SRC, READLINE_CFLAGS): Add.
120 (SIM_EXTRA_CFLAGS): Add READLINE_CFLAGS.
121 * configure: Rebuild.
122 * configure.ac (READLINE_CFLAGS): Add.
124 2021-04-08 Tom Tromey <tom@tromey.com>
126 * func.c: Include sys/time.h.
128 2021-04-08 Tom Tromey <tom@tromey.com>
130 * sis.c (run_sim, main): Use new-style declaration.
131 * interf.c (run_sim, sim_open, sim_close, sim_load)
132 (sim_create_inferior, sim_store_register, sim_fetch_register)
133 (sim_info, sim_stop_reason, flush_windows, sim_do_command): Use
134 new-style declaration.
135 * help.c (usage, gen_help): Use new-style declaration.
136 * func.c (batch, set_regi, set_rega, disp_reg, limcalc)
137 (reset_stat, show_stat, init_bpt, int_handler, init_signals)
138 (disp_fpu, disp_regs, disp_ctrl, disp_mem, dis_mem, event)
139 (init_event, set_int, advance_time, now, wait_for_irq, check_bpt)
140 (reset_all, sys_reset, sys_halt): Use new-style declaration.
141 * float.c (get_accex, clear_accex, set_fsr): Use new-style
143 * exec.c (sub_cc, add_cc, log_cc, dispatch_instruction, fpexec)
144 (chk_asi, execute_trap, check_interrupts, init_regs): Use
145 new-style declaration.
146 * erc32.c (init_sim, reset, decode_ersr, mecparerror)
147 (error_mode, decode_memcfg, decode_wcr, decode_mcr, sim_halt)
148 (close_port, exit_sim, mec_reset, mec_intack, chk_irq, mec_irq)
149 (set_sfsr, mec_read, mec_write, init_stdio, restore_stdio)
150 (port_init, read_uart, write_uart, flush_uart, uarta_tx)
151 (uartb_tx, uart_rx, uart_intr, uart_irq_start, wdog_intr)
152 (wdog_start, rtc_intr, rtc_start, rtc_counter_read)
153 (rtc_scaler_set, rtc_reload_set, gpt_intr, gpt_start)
154 (gpt_counter_read, gpt_scaler_set, gpt_reload_set, timer_ctrl)
155 (memory_read, memory_write, get_mem_ptr, sis_memory_write)
156 (sis_memory_read): Use new-style declaration.
158 2021-04-05 Tom Tromey <tromey@adacore.com>
160 * configure: Rebuild.
161 * configure.ac (READLINE): Adjust in-tree value.
163 2021-04-02 Mike Frysinger <vapier@gentoo.org>
165 * aclocal.m4, configure: Regenerate.
167 2021-02-28 Mike Frysinger <vapier@gentoo.org>
169 * configure: Regenerate.
171 2021-02-27 Mike Frysinger <vapier@gentoo.org>
173 * Makefile.in (SIM_EXTRA_ALL): Delete.
176 2021-02-21 Mike Frysinger <vapier@gentoo.org>
178 * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
179 * aclocal.m4, configure: Regenerate.
181 2021-02-13 Mike Frysinger <vapier@gentoo.org>
183 * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
184 * aclocal.m4, configure: Regenerate.
186 2021-02-06 Mike Frysinger <vapier@gentoo.org>
188 * interf.c (sim_memory_map): Define.
190 2021-02-06 Mike Frysinger <vapier@gentoo.org>
192 * configure: Regenerate.
194 2021-01-11 Mike Frysinger <vapier@gentoo.org>
196 * configure.ac: Call SIM_AC_OPTION_WARNINGS.
197 * configure: Regenerate.
199 2021-01-11 Mike Frysinger <vapier@gentoo.org>
201 * config.in, configure: Regenerate.
202 * sis.c: Delete HAVE_STDLIB_H.
204 2021-01-09 Mike Frysinger <vapier@gentoo.org>
206 * configure: Regenerate.
208 2021-01-08 Mike Frysinger <vapier@gentoo.org>
210 * configure: Regenerate.
212 2021-01-04 Mike Frysinger <vapier@gentoo.org>
214 * configure: Regenerate.
216 2020-07-29 Simon Marchi <simon.marchi@efficios.com>
218 * configure: Re-generate.
220 2018-10-30 Joel Sherrill <joel@rtems.org>
222 * configure.ac: Remove the Cygwin-specific libtermcap.a hack
223 and use the standard logic to determine which library to use.
224 * configure: Regenerate.
226 2017-09-06 John Baldwin <jhb@FreeBSD.org>
228 * configure: Regenerate.
230 2016-01-10 Mike Frysinger <vapier@gentoo.org>
232 * config.in, configure: Regenerate.
234 2016-01-10 Mike Frysinger <vapier@gentoo.org>
236 * configure: Regenerate.
238 2016-01-10 Mike Frysinger <vapier@gentoo.org>
240 * configure: Regenerate.
242 2016-01-10 Mike Frysinger <vapier@gentoo.org>
244 * configure: Regenerate.
246 2016-01-10 Mike Frysinger <vapier@gentoo.org>
248 * configure: Regenerate.
250 2016-01-10 Mike Frysinger <vapier@gentoo.org>
252 * configure: Regenerate.
254 2016-01-10 Mike Frysinger <vapier@gentoo.org>
256 * configure: Regenerate.
258 2016-01-10 Mike Frysinger <vapier@gentoo.org>
260 * configure: Regenerate.
262 2016-01-09 Mike Frysinger <vapier@gentoo.org>
264 * config.in, configure: Regenerate.
266 2016-01-06 Mike Frysinger <vapier@gentoo.org>
268 * interf.c (sim_open): Mark argv const.
269 (sim_create_inferior): Mark argv and env const.
271 2016-01-04 Mike Frysinger <vapier@gentoo.org>
273 * configure: Regenerate.
275 2016-01-03 Mike Frysinger <vapier@gentoo.org>
277 * interf.c (sim_open): Replace while loop with a call to countargv.
279 2016-01-03 Mike Frysinger <vapier@gentoo.org>
281 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
282 * configure: Regenerate.
283 * exec.c (fpexec): Rename CURRENT_HOST_BYTE_ORDER to
285 * sis.h (WITH_HOST_BYTE_ORDER): Rename to ...
286 (HOST_BYTE_ORDER): ... this.
288 2016-01-02 Mike Frysinger <vapier@gentoo.org>
290 * configure: Regenerate.
292 2015-12-26 Mike Frysinger <vapier@gentoo.org>
294 * config.in, configure: Regenerate.
296 2015-06-23 Mike Frysinger <vapier@gentoo.org>
298 * configure: Regenerate.
300 2015-06-12 Mike Frysinger <vapier@gentoo.org>
302 * configure: Regenerate.
304 2015-06-12 Mike Frysinger <vapier@gentoo.org>
306 * configure: Regenerate.
308 2015-05-17 Mike Frysinger <vapier@gentoo.org>
310 * erc32.c: Re-add file overview & author info.
311 * exec.c, float.c, func.c, help.c, interf.c, sis.c: Likewise.
313 2015-05-08 Joel Brobecker <brobecker@adacore.com>
315 * configure.ac: Add copyright header.
316 * erc32.c: Change copyright holder to FSF. Reformat.
317 * exec.c, float.c, func.c, interf.c, sis.c, sis.h: Likewise.
318 * help.c, startsim: Add copyright header.
320 2015-04-29 Nick Clifton <nickc@redhat.com>
323 * sis.c (main): Remove unreachable code.
325 2015-04-24 David Binderman <dcb314@hotmail.com>
326 Nick Clifton <nickc@redhat.com>
329 * exec.c (add32): Fix typo in check for overflow.
331 2015-04-19 Jiri Gaisler <jiri@gaisler.se>
333 * erc32.c (current_target_byte_order): Delete.
334 (fetch_bytes): Remove.
335 (store_bytes): Remove byte twisting.
336 (memory_read, memory_write): Access memory directly.
337 (extract_short, extract_short_signed, extract_byte,
338 extract_byte_signed): New function for for sub-word LD instructions.
339 * exec.c (extract_short, extract_short_signed, extract_byte,
340 extract_byte_signed): New functions.
341 (dispatch_instruction): Update memory reads.
342 * func.c (current_target_byte_order): Delete.
343 (get_regi): Delete little endian handling.
344 (disp_ctrl, dis_mem): Adjust print-out to new data endian.
345 (bfd_load): Delete little endian handling.
346 * interf.c (current_target_byte_order): Delete.
347 (sim_open): Set dinfo to host endian to get correct disassembly.
348 (sim_write, sim_read): Convert endian when gdb reads or writes
350 * sis.c (main): Set endian.
351 * sis.h (EBT): Define.
353 2015-04-13 Mike Frysinger <vapier@gentoo.org>
355 * configure: Regenerate.
357 2015-03-31 Mike Frysinger <vapier@gentoo.org>
359 * config.in, configure: Regenerate.
361 2015-03-28 Jiri Gaisler <jiri@gaisler.se>
363 * func.c (exec_cmd): Fix old style prototype. Mark cmd const. Save
364 the command in a new cmdsave2 to avoid modifying.
365 (bfd_load): Fix old style prototype. Mark fname const.
366 * sis.h (exec_cmd): Mark cmd const.
367 (bfd_load): Mark fname const.
369 2015-03-28 Jiri Gaisler <jiri@gaisler.se>
371 * erc32.c (memory_iread): New function to fetch instructions.
372 (memory_read): Print message in verbose mode.
373 * interf.c (run_sim): Use memory_iread.
374 * sis.c (run_sim): As above.
375 * sis.h (memory_iread): New prototype.
378 2015-03-28 Mike Frysinger <vapier@gentoo.org>
380 * erc32.c (mec_read): Delete parenthesis around return statement.
381 (mec_write, read_uart, rtc_counter_read, gpt_counter_read, memory_read,
382 memory_write, get_mem_ptr, sis_memory_write, sis_memory_read): Likewise.
383 * exec.c (sub_cc, add_cc, add32, dispatch_instruction, fpexec, chk_asi,
384 execute_trap, check_interrupts): Likewise.
385 * float.c (get_accex): Likewise.
386 * func.c (batch, limcalc, exec_cmd, disp_fpu, now, wait_for_irq,
387 check_bpt, bfd_load, get_time): Likewise.
388 * interf.c (run_sim, sim_write, sim_read): Likewise.
389 * sis.c (run_sim): Likewise.
391 2015-03-24 Mike Frysinger <vapier@gentoo.org>
393 * interf.c (sim_set_callbacks, sim_size, sim_trace): Delete.
395 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
397 * func.c (exec_cmd): Silence compiler warnings when calling system().
398 (batch): Replace fgets() with getline().
400 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
402 * func.c (show_stat): Print simulation time in portable long long
404 * help.c (usage): Update usage help print-out.
405 * sis.c (run_sim): Increase debug level with -v. Also print
406 simulation time in portable long long format.
407 * sis.h: Use stdint.h for portable 32- and 64-bit ints.
409 2015-03-16 Mike Frysinger <vapier@gentoo.org>
411 * config.in, configure: Regenerate.
413 2015-03-16 Jiri Gaisler <jiri@gaisler.se>
415 * Makefile.in (end, end.h): Remove target rules.
416 (clean): Remove end and end.h.
417 (erc32.o, exec.o, float.o, func.o, help.o, interf.o, sis.o): Delete
419 * configure, config.in: Regenerate.
420 * configure.ac: Use SIM_AC_OPTION_HOSTENDIAN
422 * erc32.c: Remove end.h include.
423 * exec.c: Remove end.h include. Use HOST_LITTLE_ENDIAN.
424 * func.c, sis.c: Likewise.
426 2015-03-14 Mike Frysinger <vapier@gentoo.org>
428 * Makefile.in (SIM_RUN_OBJS): Set to sis.o.
430 2015-03-14 Mike Frysinger <vapier@gentoo.org>
432 * configure.ac (AC_CHECK_HEADERS): Delete.
433 * aclocal.m4, configure: Regenerate.
435 2015-02-22 Jiri Gaisler <jiri@gaisler.se>
437 * Makefile.in: Add include path to readline.h.
438 sis.c: Remove locally define readline types.
440 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
442 * func.c (reset_stat, show_stat): Switch to double in time keeping.
443 (get_time): New function to get system time.
444 * interf.c (run_sim): Use get_time() for system time.
445 * sis.c (run_sim): Likewise.
448 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
450 * Makefile.in: Remove unused defines
452 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
454 * float.c (get_accex, clear_accex, set_fsr): Use functions from fenv.h
455 instead of custom assembly.
457 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
459 * erc32.c (mec_read): Allow simulator memory size to be read
461 (boot_init): initialize memory and timers if start address is
463 * func.c (exe_cmd): Call boot_init if start address not 0.
464 * interf.c (run_sim): Likewise.
466 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
468 * exec.c (init_regs): erc32 has vendor ID 1 and version ID 1 in %psr.
470 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
472 * func.c (print_insn_sparc_sis): Add helper function for disassembly.
473 (disp_ctrl): Use helper function.
475 2014-08-19 Alan Modra <amodra@gmail.com>
477 * configure: Regenerate.
479 2014-08-15 Roland McGrath <mcgrathr@google.com>
481 * configure: Regenerate.
482 * config.in: Regenerate.
484 2014-03-10 Mike Frysinger <vapier@gentoo.org>
486 * interf.c (sim_do_command): Add const to cmd.
488 2014-03-05 Mike Frysinger <vapier@gentoo.org>
490 * interf.c (sim_load): Add const to prog.
492 2013-10-09 Sergio Durigan Junior <sergiodj@redhat.com>
495 * float.c (set_fsr): Add missing "break" statements. Reindent
498 2013-09-23 Alan Modra <amodra@gmail.com>
500 * configure: Regenerate.
502 2013-06-03 Mike Frysinger <vapier@gentoo.org>
504 * aclocal.m4, configure: Regenerate.
506 2013-03-14 Joel Sherrill <joel.sherrill@oarcorp.com>
508 * Makefile.in: Include build directory in search path to find
511 2012-08-16 Nick Clifton <nickc@redhat.com>
513 * end.c: Include config.h before system header files.
519 * interf.c: Likewise.
521 2012-06-15 Joel Brobecker <brobecker@adacore.com>
523 * sys.h: Include "config.h".
525 2012-06-15 Joel Brobecker <brobecker@adacore.com>
527 * config.in, configure: Regenerate.
529 2012-05-24 Pedro Alves <palves@redhat.com>
533 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
535 2012-03-24 Mike Frysinger <vapier@gentoo.org>
537 * aclocal.m4, config.in, configure: Regenerate.
539 2011-12-31 Mike Frysinger <vapier@gentoo.org>
542 * configure.ac: Change AC_CHECK_LIB to AC_SEARCH_LIBS to match
543 the code in gdb's configure.ac with $TERMCAP.
544 * configure: Regenerated.
546 2011-12-03 Mike Frysinger <vapier@gentoo.org>
548 * aclocal.m4: New file.
549 * configure: Regenerate.
551 2011-10-17 Mike Frysinger <vapier@gentoo.org>
553 * configure.ac: Change include to common/acinclude.m4.
555 2011-10-17 Mike Frysinger <vapier@gentoo.org>
557 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
558 call. Replace common.m4 include with SIM_AC_COMMON.
559 * configure: Regenerate.
561 2011-06-09 Mike Frysinger <vapier@gentoo.org>
563 * interf.c (sim_open): Accept and ignore `--sysroot=...'.
565 2011-06-01 Joel Brobecker <brobecker@adacore.com>
567 * interf.c (sim_complete_command): New stub function.
569 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
571 * interf.c (sim_store_register): Update return value to
574 2010-05-20 Joel Brobecker <brobecker@adacore.com>
576 * sis.h: Remove #include <stdint.h>.
577 (uint64, int64): Redefine without using stdint.h.
578 (UINT64_MAX): Define.
580 2010-04-20 Tiemen Schut <T.Schut@sron.nl>
582 * erc32.c (sis_memory_write): Change prototype to const unsigned char *.
583 * func.c (exec_cmd, event, advance_time, wait_for_irq): Use uint64
585 * interf.c (run_sim): Change icount to uint64_t. Use strtol directly.
586 (sim_resume): Specify maximum run time as uint64.
587 * sis.c (run_sim): Change icount to uint64_t.
588 * sis.h: Define uint64 as uint64_t. Change various fields and
589 prototypes to uint64 to support longer simulations.
591 2010-04-14 Mike Frysinger <vapier@gentoo.org>
593 * interp.c (sim_write): Add const to buf arg.
595 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
597 * configure: Regenerate.
599 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
601 * config.in: Regenerate.
602 * configure: Likewise.
604 * configure: Regenerate.
606 2008-11-10 Joel Sherrill <joel.sherrill@oarcorp.com>
608 * erc32.c, exec.c: Fix warnings.
610 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
612 * configure: Regenerate to track ../common/common.m4 changes.
615 2008-06-09 Joel Sherrill <joel.sherrill@oarcorp.com>
617 * sis.c: Correct spelling error.
619 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
620 Daniel Jacobowitz <dan@codesourcery.com>
621 Joseph Myers <joseph@codesourcery.com>
623 * configure: Regenerate.
625 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
627 * acconfig.h: Remove.
628 * config.in: Regenerate.
630 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
632 * configure.ac: Add test for readline, substitute READLINE.
633 * Makefile.in (READLINE_LIB): New substituted-contents variable.
634 (SIM_EXTRA_LIBDEPS): Don't set.
635 (SIM_EXTRA_LIBS): Use $(READLINE_LIB) instead of
636 ../../readline/libreadline.a.
637 * configure: Regenerate.
639 2006-08-08 Daniel Jacobowitz <dan@codesourcery.com>
641 * Makefile.in (func.o, help.o): Correct dependencies.
643 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
645 * Makefile.in (install-sis): Honor DESTDIR.
647 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
649 * configure: Regenerated.
651 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
653 * configure: Regenerated.
655 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
657 * configure: Regenerated.
659 2005-11-28 Mark Mitchell <mark@codesourcery.com>
661 * interf.c: (gdb/signals.h): Include it.
662 (sim_stop_reason): Use TARGET_SIGNAL_*.
664 2005-07-08 Ben Elliston <bje@au.ibm.com>
666 * func.c: Remove ANSI_PROTOTYPES conditional code.
668 2005-03-23 Mark Kettenis <kettenis@gnu.org>
670 * configure: Regenerate.
672 2005-03-07 Jerome Guitton <guitton@gnat.com>
674 * sim/erc32/float.c (set_fsr): Do not use deprecated multi-line
676 (clear_accex): Ditto.
677 * sim/erc32/interf.c: Remove the redeclaration of fprintf.
678 * sim/erc32/sis.c: Ditto.
679 * sim/erc32/exec.c: Add missing semicolon.
680 * sim/erc32/func.c: Remove definitions of generic_print_address,
681 generic_symbol_at_address, buffer_read_memory and perror_memory, as
682 they are already defined in opcodes/dis-buf.c.
684 2005-01-14 Andrew Cagney <cagney@gnu.org>
686 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
687 explicit call to AC_CONFIG_HEADER.
688 * configure: Regenerate.
690 2005-01-12 Andrew Cagney <cagney@gnu.org>
692 * configure.ac: Update to use ../common/common.m4.
693 * configure: Re-generate.
695 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
697 * configure: Regenerated to track ../common/aclocal.m4 changes.
699 2005-01-07 Andrew Cagney <cagney@gnu.org>
701 * configure.ac: Rename configure.in, require autoconf 2.59.
702 * configure: Re-generate.
704 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
706 * configure: Regenerate for ../common/aclocal.m4 update.
708 2004-11-11 Andreas Schwab <schwab@suse.de>
710 * interf.c: Include "libiberty.h" instead of declaring buildargv
713 2003-02-27 Andrew Cagney <cagney@redhat.com>
715 * interf.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
717 2002-06-16 Andrew Cagney <ac131313@redhat.com>
719 * configure: Regenerated to track ../common/aclocal.m4 changes.
721 2002-06-08 Andrew Cagney <cagney@redhat.com>
723 * sis.h: Include "gdb/remote-sim.h" and "gdb/callback.h".
724 * interf.c: Include "gdb/remote-sim.h".
726 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
728 * configure: Regenerated to track ../common/aclocal.m4 changes.
730 2000-03-07 Frank Ch. Eigler <fche@redhat.com>
732 From John Dallaway <jld@redhat.co.uk>:
733 * Makefile.in (install-sis): Add $(EXEEXT) for Windows host.
735 2000-03-03 Jonathan Larmour <jlarmour@redhat.co.uk>
737 * func.c (buffer_read_memory): Change type of size to unsigned to
740 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
742 * configure: Regenerated to track ../common/aclocal.m4 changes.
744 1999-05-08 Felix Lee <flee@cygnus.com>
746 * configure: Regenerated to track ../common/aclocal.m4 changes.
748 1999-03-03 DJ Delorie <dj@cygnus.com>
750 * configure.in: add termcap and -luser32 for host=cygwin
751 * configure: regenerate
753 1999-02-11 Hugo Tyson <hmt@cygnus.co.uk>
755 * exec.c (dispatch_instruction):
756 Correct the sense of the
758 sregs->trap = TRAP_UNIMP;
761 clause that has been pasted around: it's correct in the SCAN and
762 DIVScc (divide step) cases (where it was probably originally
763 written?), but reversed in the SDIV, SDIVcc, UDIV, UDIVcc cases
764 ie. instructions only in the SPARC V8 or SPARClite 86x
765 architectures. It was also present when not required for SMUL,
766 SMULcc, UMUL, UMULcc instructions that are present in all
769 1999-01-25 Hugo Tyson <hmt@cygnus.co.uk>
771 * interf.c (run_sim): Fix a bug in the main loop's handling of
772 annulled delay slot instructions. There is precedent for this
773 change; the _other_ main loop in sis.c gets it right according to
774 my reading of the code.
776 The bug is: if an interrupt happens when the next instruction
777 (at sregs->pc) is annulled, the trap is taken (by execute_trap())
778 with the current values of PC and NPC, so when the trap returns,
779 the annulled instruction is indeed executed. Another giveaway is
780 that the annul flag is cleared in execute_trap(): the information
781 is demonstrably discarded.
783 The solution is: perform annulling before looking for traps, in
784 fact it's neater to do annulling, see if there's an interrupt and
785 if not, do the instruction, then handle traps be they generated by
786 interrupts pending or by the instruction we might just have done.
787 That's what the sis.c one does.
789 1999-01-20 Hugo Tyson <hmt@cygnus.co.uk>
791 * sis.h: Add asr17 register for support of SparcLITE (at least the
792 Hitachi ones I find before me)
794 * exec.c (dispatch_instruction): Case WRY: Allow write of asr17 if
795 sparclite. Other ASR numbers than 17 or 0 (Y) trap out.
796 Case RDY: Allow read of asr17 if sparclite. Other ASRs ditto.
797 (execute_trap): Do single-vector-trapping if asr17 bit 0 is set.
798 (init_regs): Initialize y and asr17.
799 NB: In instruction-set space, the Y register is asr0; the
800 instructions have different names for human reasons only.
803 * interf.c: Set boolean mode variable dumbio if invoked with
804 argument "-dumbio" and mention it of verbose.
805 * erc32.c: if "dumbio" is set, do not assume that there is a
806 terminal type device attached to stdin/stdout. Do not set
807 buffering or mess with tcsetattr or do any read operations in
808 order to make UART interrupts; not input data is supported.
809 This is necessary to allow the sim to be used within the eCos
810 testing infrastructure where stdin/stdout are pipes to a TCL
811 program; the sim hangs otherwise.
813 Thu Jul 23 07:17:03 1998 Mark Alexander <marka@cygnus.com>
815 * exec.c (dispatch_instruction): Add SPARClite 'scan' instruction.
817 Tue Jul 7 21:12:41 1998 Mark Alexander <marka@cygnus.com>
819 * func.c (bfd_load): Add special handling of a.out executables.
821 Sat Jun 13 08:33:25 1998 Mark Alexander <marka@cygnus.com>
823 * func.c (bfd_load): Print correct endianness.
824 * interf.c (run_sim): Print debugging information if verbosity level
826 (sim_open): Repeated -v options now increment verbosity level.
827 (sim_store_register): Handle little-endian case.
828 (flush_window): Print debugging information if verbosity level
831 Tue Jun 2 15:20:35 1998 Mark Alexander <marka@cygnus.com>
833 * interf.c (sim_open): Use revamped memory_read, which makes
834 byte-swapping unnecessary. Add -sparclite-board option for
835 emulating RAM found on typical SPARClite boards. Print
836 error message for unrecognized option.
837 * erc32.c: Change RAM address and size from constants to variables,
838 to allow emulation of SPARClite board RAM.
839 (fetch_bytes, store_bytes): New helper functions for revamped
840 mememory_read and memory_write.
841 (memory_read, memory_write): Rewrite to store bytes in target
842 byte order instead of storing words in host byte order; this
843 greatly simplifies support of little-endian programs.
844 (get_mem_ptr): Remove unnecessary byte parameter.
845 (sis_memory_write, sis_memory_read): Store words in target
846 byte order instead of host byte order.
847 (byte_swap_words): Remove, no longer needed.
848 * sis.h ((byte_swap_words): Remove declaration, no longer needed.
849 (memory_read): Add new sz parameter.
850 * sis.c (run_sim): Use revamped memory_read, which makes
851 byte-swapping unnecessary.
852 * exec.c (dispatch_instruction): Use revamped memory_read, which
853 makes byte-swapping and double-word fetching unnecessary.
854 * func.c (sparclite_board): Declare new variable.
855 (get_regi): Handle little-endian data.
856 (bfd_load): Recognize little-endian SPARClite as having
859 Fri May 22 14:23:16 1998 Mark Alexander <marka@cygnus.com>
861 * erc32.c (port_init): Print messages only if sis_verbose is true.
862 * func.c (bfd_load): Ditto.
863 * interf.c (sim_open): Ditto.
865 Thu May 14 23:10:48 1998 Mark Alexander <marka@cygnus.com>
867 * sis.h (uint64, int64): Define.
868 * exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
869 * (mul64): Simplify calculation of negative result.
870 * (div64): New helper function for 64-bit division.
871 * (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
874 Wed May 13 14:59:54 1998 Mark Alexander <marka@cygnus.com>
876 * erc32.c (close_port): Don't close stdin; it kills GDB.
877 (byte_swap_words): New function.
878 * sis.h: (byte_swap_words): Declare.
879 * interf.c (run_sim): Always fetch instructions as big-endian.
880 * sis.c (run_sim): Ditto.
882 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
884 * configure: Regenerated to track ../common/aclocal.m4 changes.
886 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
888 * configure: Regenerated to track ../common/aclocal.m4 changes.
891 Sun Apr 26 15:20:17 1998 Tom Tromey <tromey@cygnus.com>
893 * acconfig.h: New file.
894 * configure.in: Reverted change of Apr 24; use sinclude again.
896 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
898 * configure: Regenerated to track ../common/aclocal.m4 changes.
901 Fri Apr 24 11:19:52 1998 Tom Tromey <tromey@cygnus.com>
903 * configure.in: Don't call sinclude.
905 Sat Apr 18 12:00:16 1998 Mark Alexander <marka@cygnus.com>
907 * func.c (disp_fpu): Fix build problem on big-endian hosts.
909 Wed Apr 8 19:33:34 1998 Mark Alexander <marka@cygnus.com>
911 * erc32.c (sim_stop): Handle SIGINT gracefully.
912 * interf.c (sim_open): Don't catch SIGINT; GDB will do that for us.
914 Wed Apr 8 18:29:40 1998 Mark Alexander <marka@cygnus.com>
916 * exec.c (dispatch_instruction): Change how carry out is calculated
917 in DIVSCC. Add emulation of SMULCC, UMUL, and UMULCC.
919 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
921 * configure: Regenerated to track ../common/aclocal.m4 changes.
923 Wed Apr 1 21:19:18 1998 Mark Alexander <marka@cygnus.com>
925 * end.c: Update to version 2.7.5, fix compiler warnings and bugs.
935 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
937 * configure: Regenerated to track ../common/aclocal.m4 changes.
939 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
941 * configure: Regenerated to track ../common/aclocal.m4 changes.
943 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
945 * configure: Regenerated to track ../common/aclocal.m4 changes.
947 Tue Feb 17 12:41:11 1998 Andrew Cagney <cagney@b1.cygnus.com>
949 * interf.c (sim_store_register, sim_fetch_register): Pass in
950 length parameter. Return -1.
952 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
954 * configure: Regenerated to track ../common/aclocal.m4 changes.
956 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
958 * configure: Regenerated to track ../common/aclocal.m4 changes.
960 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
962 * configure: Regenerated to track ../common/aclocal.m4 changes.
964 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
966 * configure: Regenerated to track ../common/aclocal.m4 changes.
969 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
971 * configure: Regenerated to track ../common/aclocal.m4 changes.
973 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
975 * configure: Regenerated to track ../common/aclocal.m4 changes.
977 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
979 * configure: Regenerated to track ../common/aclocal.m4 changes.
981 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
983 * configure: Regenerated to track ../common/aclocal.m4 changes.
985 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
987 * configure: Regenerated to track ../common/aclocal.m4 changes.
989 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
991 * configure: Regenerated to track ../common/aclocal.m4 changes.
993 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
995 * configure: Regenerated to track ../common/aclocal.m4 changes.
997 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
999 * configure: Regenerated to track ../common/aclocal.m4 changes.
1002 Tue Aug 26 10:38:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1004 * float.c (__setfpucw): Compile on any i386 target. Not just NT.
1006 * interf.c (sim_kill): Delete.
1007 (sim_create_inferior): Add ABFD argument. Initialize PC from ABFD
1009 (sim_load): Don't save start address.
1010 (start_address): Delete variable.
1012 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1014 * configure: Regenerated to track ../common/aclocal.m4 changes.
1017 Mon Aug 25 16:19:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1019 * interf.c (sim_open): Add ABFD argument. Change ARGV to PARGV.
1021 Mon Jun 30 11:45:25 1997 Doug Evans <dje@canuck.cygnus.com>
1023 * Makefile.in (install-sis): Change $(srcdir)/sis to sis.
1025 Wed May 28 09:46:13 1997 Andrew Cagney <cagney@b1.cygnus.com>
1027 * interf.c (sim_set_callbacks): Drop SD argument - not applicable.
1028 (sim_open): Add callback arg, save it.
1030 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1032 * configure: Regenerated to track ../common/aclocal.m4 changes.
1034 Tue Apr 22 11:05:01 1997 Doug Evans <dje@canuck.cygnus.com>
1036 * interf.c (sim_open): Undo patch to add -E support.
1038 Thu Apr 17 03:03:56 1997 Doug Evans <dje@canuck.cygnus.com>
1040 * interf.c (sim_open): Ignore -E arg.
1041 (start_address): New static local.
1042 (sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd.
1043 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1045 Tue Apr 15 15:16:11 1997 Ian Lance Taylor <ian@cygnus.com>
1047 * Makefile.in (install-sis): Depend upon installdirs. Use
1048 $(program_transform_name) directly, rather than using
1051 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1053 * configure: Regenerated to track ../common/aclocal.m4 changes.
1056 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1058 * interf.c (sim_open): New arg `kind'.
1060 * configure: Regenerated to track ../common/aclocal.m4 changes.
1062 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1064 * configure: Regenerated to track ../common/aclocal.m4 changes.
1066 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1068 * configure: Re-generate.
1070 Thu Mar 13 12:46:04 1997 Doug Evans <dje@canuck.cygnus.com>
1072 * interf.c (sim_open): New SIM_DESC result. Argument is now in
1074 (other sim_*): New SIM_DESC argument.
1076 Tue Feb 4 13:35:20 1997 Doug Evans <dje@canuck.cygnus.com>
1078 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1079 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1080 * configure.in: sinclude ../common/aclocal.m4.
1081 * configure: Regenerated.
1083 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1085 * configure configure.in Makefile.in: Update to new configure
1086 scheme which is more compatible with WinGDB builds.
1087 * configure.in: Improve comment on how to run autoconf.
1088 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1089 * Makefile.in: Use autoconf substitution to install common
1092 Wed Dec 4 18:25:04 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1094 * interf.c (run_sim): Stop the simulator and reset the stdio after
1097 Tue Dec 3 11:54:37 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1099 * configure.in: Look for libtermcap.a.
1100 * Makefile.in: Only link in -ltermcap if it exists.
1101 * erc32.c: Update to version 2.6a. Fix uart handling.
1102 * exec.c: Update to version 2.6a. Add sparclite support.
1103 * float.c: Update to version 2.6a. Convert comments to
1104 preprocessor warnings. Add __setfpucw() for i385 hosts so floating
1105 point exceptions work on win32.
1106 * func.c: Update to version 2.6a. Fix uart handling, add support
1107 for user error traps.
1108 * help.c: Update to version 2.6a. Add help note on user error
1110 * interf.c: Update to version 2.6a. Fix uart handling, and add
1112 * examples/gccx: Use sparclite cross compiler, not native gcc.
1113 * examples/srt0.S: Use "mov" rather than "wr" for manipulating
1116 Mon Nov 25 08:28:10 1996 Fred Fish <fnf@cygnus.com>
1118 * Makefile.in (run.o): Remove this rule, it hides the one in
1119 ../common/Make-common.in that correctly references the source
1120 in the sibling ../common directory.
1122 Wed Nov 20 01:30:12 1996 Doug Evans <dje@canuck.cygnus.com>
1124 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
1125 (SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define.
1126 (SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define.
1127 * configure.in: Simplify using macros in ../common/aclocal.m4.
1128 Call AC_CHECK_HEADERS(stdlib.h).
1129 * configure: Regenerated.
1130 * config.in: New file.
1131 * func.c (sim_set_callbacks): Delete, moved to
1132 * interf.c (sim_set_callbacks): here.
1133 (sim_callback): New global.
1134 Rewrite all calls to printf_filtered to go through callback.
1135 (sim_size,sim_trace): New functions.
1136 (sim_{insert,remove}_breakpoint): #if 0 out.
1137 * sis.c: #include "config.h". #include <stdlib.h> if present.
1138 (main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype.
1139 * sis.h: #include "callback.h".
1140 * run.c: Deleted, using one in ../common now.
1142 Thu Oct 3 16:12:03 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1144 * Makefile.in (clean): Move config.log to distclean.
1146 Wed Oct 2 16:57:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1148 * Makefile.in (clean): Also remove config.log.
1150 Sat Sep 14 00:00:46 1996 Ian Lance Taylor <ian@cygnus.com>
1152 * Makefile.in (CC_FOR_BUILD): New variable.
1153 (AR, AR_FLAGS, BISON, MAKEINFO): Remove duplicate variables.
1154 (RANLIB, CC): Likewise.
1155 (end): Use $(CC_FOR_BUILD), not $(CC).
1156 * configure.in: Set CC_FOR_BUILD.
1157 * configure: Rebuild.
1159 Sun Sep 8 14:04:37 1996 Stu Grossman (grossman@critters.cygnus.com)
1161 * erc32.c (port_init): Disable this for __GO32__ (got no pty's
1164 Mon Aug 12 17:04:58 1996 Stu Grossman (grossman@critters.cygnus.com)
1166 * erc32.c: Don't include sys/ioctl.h or sys/file.h. They aren't
1168 * (port_init): Don't even *try* to open pty's under _WIN32.
1169 * Use SIM_ADDR, not caddr_t for declaring vars that hold addresses.
1170 * float.c: Get rid of #warning. Makes Microsoft C barf.
1171 * interf.c (sim_open): Cast fprintf to (fprintf_ftype) to fix
1173 * (sim_load sim_create_inferior sim_read): Use prototypes only in
1175 * Get rid of enum sim_stop. It's defined in remote-sim.h.
1176 * (sim_stop_reason): Define SIGTRAP if _WIN32.
1177 * sis.h: Include ansidecl.h and remote-sim.h.
1179 Wed Jul 3 16:05:23 1996 Stu Grossman (grossman@critters.cygnus.com)
1181 * erc32.c (mec_reset mec_read mec_write memory_read memory_write),
1182 sis.h: Get rid of all uses of long long's.
1183 * (close_port read_uart write_uart uarta_tx): Don't seg fault
1184 when can't open pty's.
1185 * exec.c: Add two new instructions: smul, and divscc.
1186 * interf.c (flush_windows): New routine to flush the register
1187 windows out to the stack just before returning to GDB. Makes
1188 backtraces work much better.
1190 Wed Jun 26 12:19:11 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1192 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1193 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1194 (docdir, oldincludedir): Removed.
1195 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1196 (AC_PROG_INSTALL): Added.
1197 * configure: Rebuilt.
1199 Mon Jun 24 14:19:07 1996 Ian Lance Taylor <ian@cygnus.com>
1201 * configure.in: Call AC_PROG_CC before running configure.host.
1202 * configure: Rebuild with autoconf 2.10.
1204 Tue Jun 4 10:37:12 1996 Tom Tromey <tromey@csk3.cygnus.com>
1206 * Makefile.in (install): Don't check to see if tooldir exists.
1207 Make $(tooldir) and $(tooldir)/bin.
1209 Mon Jun 3 12:33:38 1996 Ian Lance Taylor <ian@cygnus.com>
1211 * Makefile.in (end.h): Use explicit ./ when running end.
1213 Sun May 19 21:05:31 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1215 * func.c(bfd_load): Don't try to print the filename if the pfbd is
1217 * interf.c(sim_load): Pass the whole string, not just the first
1220 Version 2.1 26-02-96
1221 --------------------
1223 * Fixed bug in "go" command.
1225 version 2.0 05-02-96
1226 --------------------
1228 * Fixed bug in interrupt force register (erc32.c).
1230 * Change file load function to use bfd_openr.
1232 * SIS should now be endian independent.
1234 version 1.8 24-11-95
1235 --------------------
1237 * Fixed FPU timing - some sequences of FPU instructions did not calculate
1238 the resource dependencies right.
1240 * Corrected STDFQ when qne = 0 (again!). The ftt is set to sequence_error
1241 but no FPU trap is generated.
1243 version 1.7.1 31-10-95
1244 --------------------
1246 * Corrected STDFQ when qne = 0. Now, a trap is immidiately generated but
1247 the FPU stays in execute mode.
1249 * Corrected JMPL and RETT timing (these instructions takes two cycles).
1252 version 1.7 25-10-95
1253 --------------------
1255 * Interrupt during annuled instruction corrupted return address - fixed.
1258 version 1.6.2 25-10-95
1259 --------------------
1261 * Added -DFAST_UART to Makefile
1264 version 1.6.1 24-10-95
1265 --------------------
1267 * Fixed bug in STDFQ which caused bus error
1270 version 1.6 02-10-95
1271 --------------------
1273 * Modified srt0.s to include code that initiates registers in IU and FPU
1274 and initializes the data segment. The simulator 'load' command does not
1275 longer initialize the data segment!
1277 * Corrected MEC timer operation; scalers now divide the frequency by
1280 * MEC breakpoints are not checked during store operation
1283 version 1.5 14-09-95
1284 --------------------
1286 * Fixed some bugs in the cycle counting for IU & FPU instructions.
1288 * Fixed bug that allowed an annuled instruction to cause memory exception.
1290 * The *ws parameter in mem.c should now contain the number of waitstates
1291 required by the memory access (was total number of cycles).
1293 * The supplied srt0.s now clears the BSS (thanks Joel).
1295 version 1.4 22-08-95
1296 --------------------
1298 * Added a '-g' switch to enable/disable the GNU readline(), which cause
1299 some problems on solaris 2.x machines.
1301 * Enabled MEC watchpoint and breakpoint function to mem.c. Performance
1302 may suffer a bit ...
1304 NOTE: The UARTs are now connected to /dev/ttypc and /dev/ttypd.
1306 version 1.3 26-07-95
1307 --------------------
1309 * Fixed bug in mulscc instruction (how could that ever have worked?)
1311 * Fixed bug in UART B (flushed characters on UART A), thanks Paul.
1313 version 1.2 13-07-95
1314 --------------------
1316 * Fixed bug in interrupt handling (wrong interrupt selected when more that
1317 one interrupt pending)
1319 * Fixed updating of condition codes during logical instructions (carry and
1320 overflow were not reset)
1322 * Fixed bug in WRTBR (tt field was wrongly over-written)
1324 version 1.1 07-07-95
1325 --------------------
1327 * Fixed several bugs in the interrupt handler and callback routines.
1328 (reported by Paul Warren, Alsys)