1 2005-01-07 Andrew Cagney <cagney@gnu.org>
3 * configure.ac: Rename configure.in, require autoconf 2.59.
4 * configure: Re-generate.
6 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
8 * configure: Regenerate for ../common/aclocal.m4 update.
10 2004-06-28 Alexandre Oliva <aoliva@redhat.com>
12 2003-07-23 Richard Sandiford <rsandifo@redhat.com>
13 * compile.c (sim_resume): Make sure that dst.reg refers to the
14 right register byte in mova/sz.l @(dd,RnL),ERn.
15 2003-07-21 Richard Sandiford <rsandifo@redhat.com>
16 * compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
17 mulxs, divs and divxs.
19 * compile.c (sim_load): Update sd->memory_size.
21 2004-06-10 Michael Snyder <msnyder@redhat.com>
23 Patch submitted by Nitin Yewale <NitinY@KPITCummins.com>.
24 * compile.c (sim_resume): Corrected ANDC operation on EXR for H8S.
26 2004-01-05 Michael Snyder <msnyder@redhat.com>
28 * compile.c (sim_load): Don't pass a type to bfd_openr.
30 2003-12-16 Michael Snyder <msnyder@redhat.com>
32 Patch submitted by Anil Paranjape <AnilP1@KPITCummins.com>
33 * sim-main.h (H8300H_MSIZE): Increase from 18 bits to 24 bits.
35 2003-12-11 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
37 * compile.c (set_h8300h): Initialize globals to zero.
39 2003-10-17 Shrinivas Atre <shrinivasa@KPITCummins.com>
41 * compile.c (h8300_normal_mode): New.
42 (SP): Handle normal mode.
43 (bitfrom): Use normal mode flag to return suitable value.
44 (lvalue): Use normal mode flag to return command line location.
45 (decode): Decode instruction correctly for normal mode.
46 (init_pointers): Initialise memory correctly for normal mode.
47 (sim_resume): Handle cases for normal mode using h8300_normal_mode
49 (sim_store_register): Handle 2 byte PC for normal mode.
50 (sim_fetch_register): Handle 2 byte PC for normal mode.
51 (set_h8300h): Set normal mode flag as per architechture.
52 (sim_load): Allocate 64K for normal mode instead of bigger memory.
54 2003-07-18 Michael Snyder <msnyder@redhat.com>
56 * compile.c (decode): Enhancements for mova.
57 Initialize cst, reg, and rdisp inside the loop, for each
58 new instruction. Defer correction of the disp2 values until
59 later, and then adjust them by the size of the first operand,
60 rather than the size of the instruction.
61 (sim_resume): For mova, adjust the size of the second operand
62 according to the type of the first operand (INDEXB vs. INDEXW).
63 In cases where there is only one operand, the other two must
64 both be composed on the fly.
66 2003-07-22 Michael Snyder <msnyder@redhat.com>
68 * compile.c (sim_resume): Revert 6-24 change, it does not
69 work with gdb breakpoints.
71 2003-07-17 Michael Snyder <msnyder@redhat.com>
73 * compile.c (sim_resume): Handle shll reg, reg and shlr reg, reg.
74 (decode): IMM16 is always zero-extended.
76 2003-06-24 Michael Snyder <msnyder@redhat.com>
78 * sim-main.h (SIM_WIFSTOPPED, SIM_WSTOPSIG): Define.
79 * compile.c (sim_resume): Use the above to return stop signal.
81 2003-06-18 Michael Snyder <msnyder@redhat.com>
83 * compile.c: Replace "Hitachi" with "Renesas".
84 (decode): Distinguish AV_H8S from AV_H8H.
85 (sim_resume): H8SX can use any register for TAS.
86 (decode): Add support for VECIND.
87 (sim_resume): Implement rte/l and rts/l.
88 (GETSR): New macro (actually old macro reincarnated).
89 (decode): Add handling for IMM2.
90 (sim_resume): Drop extra block around jmp, jsr, rts.
91 Add handling for trapa and rte.
92 For divxu.b, change 0xffff mask to 0xff.
93 (set_h8300h): Add bfd_mach_h8300sxn machine.
95 2003-06-18 Corinna Vinschen <vinschen@redhat.com>
97 * sim-main.h (enum h8_regnum): Turn around order of MACH, MACL
100 2003-06-05 Michael Snyder <msnyder@redhat.com>
102 * compile.c (sim_fetch_register): Handle SBR, VBR, MACH, MACL.
103 (sim_store_register): Ditto.
105 2003-06-04 Michael Snyder <msnyder@redhat.com>
107 * compile.c (sim_info): Fix typo in output.
109 * compile.c (set_h8300h): Replace 'flag' arguments
110 with a bfd_machine argument, and decode it inline.
111 Check for bfd_mach_h8300hn and bfd_mach_h8300sn.
113 2003-06-03 Michael Snyder <msnyder@redhat.com>
115 * compile.c: Add h8300sx insns and addressing modes.
116 * sim-main.h: Replaces h8300/inst.h.
117 * Makefile.in: Tweak to bring in some sim/common stuff.
119 2003-04-13 Michael Snyder <msnyder@redhat.com>
121 * compile.c (sim_resume): Implement 'daa' and 'das' instructions.
123 2003-03-20 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
125 * compile.c (cmdline_location): Added function to
126 return the location of 8-bit (256 locations) where the
127 Command Line arguments would be stored.
128 (decode): Added a TRAP to 0xcc for Commandline
129 processing using pseudo opcode O_SYS_CMDLINE.
130 (sim_resume): Added handling of O_SYS_CMDLINE Trap.
131 (sim_create_inferior): Setting a pointer to
132 Commandline Args array.
133 * inst.h: Added a new variable ptr_command_line for
134 storing pointer to Commandline array.
136 2003-03-14 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
138 * compile.c (decode): Added code for some more magic traps.
139 * compile.c (sim_resume): Added support for File I/O system
140 calls through callback to host_system.
141 System calls provided support for :
142 open, read, write, lseek, close, stat, fstat
143 Only basic support for stat and fstat.
145 2003-02-27 Andrew Cagney <cagney@redhat.com>
147 * compile.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
149 2003-02-05 Kazu Hirata <kazu@cs.umass.edu>
151 * compile.c (init_pointers): Abort if wreg never gets initialized.
152 (sim_resume): Fix the handling of exts.w and extu.w.
154 2003-01-31 Kazu Hirata <kazu@cs.umass.edu>
156 * compile.c (sim_resume): Fix the handling of bxor.
158 2003-01-16 Michael Snyder <msnyder@redhat.com>
160 * compile.c: Change K&R function definitions to ISO.
161 (fetch): Make static, and eliminate unused parameter 'n'.
163 2002-12-26 Kazu Hirata <kazu@cs.umass.edu>
165 * compile.c: Fix formatting.
168 2002-07-29 Andrey Volkov <avolkov@transas.com>
170 * compile.c: Include "gdb/sim-h8300.h"
171 * Makefile.in: Add dependences on "inst.h",
172 "gdb/callback.h", "gdb/remote-sim.h" and "gdb/sim-h8300.h".
174 2002-06-16 Andrew Cagney <ac131313@redhat.com>
176 * configure: Regenerated to track ../common/aclocal.m4 changes.
178 2002-06-08 Andrew Cagney <cagney@redhat.com>
180 * compile.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
182 2002-05-19 Kazu Hirata <kazu@cs.umass.edu>
184 * compile.c: Fix formatting.
186 2002-05-18 Kazu Hirata <kazu@cs.umass.edu>
188 * compile.c: Fix formatting.
190 2002-05-17 Andrey Volkov (avolkov@transas.com)
192 * compile.c: Add absented opcodes: LDC, STC, EEPMOV, TAS.
194 2002-05-17 Andrey Volkov (avolkov@transas.com)
196 * compile.c: Add support of EXR register
199 2002-05-17 Andrey Volkov (avolkov@transas.com)
201 * compile.c: Made h8300s as new target, not h8300h alias.
204 2002-05-17 Andrey Volkov (avolkov@transas.com)
206 * compile.c: Add additional CCR flags (I,UI,H,U)
208 2002-05-17 Andrey Volkov (avolkov@transas.com)
210 * compile.c: Change literal regnumbers to REGNUMS.
211 Fix instruction and cycles counting
213 2001-12-20 Kazu Hirata <kazu@hxi.com>
215 * compile.c: Fix formatting.
217 2001-12-20 Kazu Hirata <kazu@hxi.com>
219 * compile.c: Fix comment typos.
221 2000-08-10 Kazu Hirata <kazu@hxi.com>
223 * compile.c (decode): Clean up the code.
225 2000-06-15 Kazu Hirata <kazu@hxi.com>
227 * compile.c (decode): Distinguish inc/dec.[wl] and adds/subs
230 2000-06-20 Frank Ch. Eigler <fche@redhat.com>
232 * compile.c: Don't include "wait.h".
233 (sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
234 instead of WIF* from host.
236 2000-06-13 Frank Ch. Eigler <fche@redhat.com>
238 * compile.c, writecode.c: Correct typo.
240 2000-06-13 Kazu Hirata <kazu@hxi.com>
242 * compile.c: Fix formatting.
244 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
246 * configure: Regenerated to track ../common/aclocal.m4 changes.
248 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
250 * configure: Regenerated to track ../common/aclocal.m4 changes.
252 1999-05-08 Felix Lee <flee@cygnus.com>
254 * configure: Regenerated to track ../common/aclocal.m4 changes.
256 1999-04-02 Keith Seitz <keiths@cygnus.com>
258 * compile.c (POLL_QUIT_INTERVAL): Define. Used to tweak the
259 frequency at which the poll_quit callback is used.
260 (sim_resume): Use POLL_QUIT_INTERVAL instead of hard-coded value.
262 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
264 * configure: Regenerated to track ../common/aclocal.m4 changes.
266 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
268 * configure: Regenerated to track ../common/aclocal.m4 changes.
271 Sun Apr 26 15:20:14 1998 Tom Tromey <tromey@cygnus.com>
273 * acconfig.h: New file.
274 * configure.in: Reverted change of Apr 24; use sinclude again.
276 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
278 * configure: Regenerated to track ../common/aclocal.m4 changes.
281 Fri Apr 24 11:19:46 1998 Tom Tromey <tromey@cygnus.com>
283 * configure.in: Don't call sinclude.
285 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
287 * configure: Regenerated to track ../common/aclocal.m4 changes.
289 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
291 * configure: Regenerated to track ../common/aclocal.m4 changes.
293 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
295 * configure: Regenerated to track ../common/aclocal.m4 changes.
297 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
299 * configure: Regenerated to track ../common/aclocal.m4 changes.
301 Tue Feb 17 12:42:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
303 * compile.c (sim_store_register, sim_fetch_register): Pass in
304 length parameter. Return -1.
306 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
308 * configure: Regenerated to track ../common/aclocal.m4 changes.
310 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
312 * configure: Regenerated to track ../common/aclocal.m4 changes.
314 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
316 * configure: Regenerated to track ../common/aclocal.m4 changes.
318 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
320 * configure: Regenerated to track ../common/aclocal.m4 changes.
323 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
325 * configure: Regenerated to track ../common/aclocal.m4 changes.
327 Tue Nov 11 16:52:07 1997 Angela Marie Thomas (angela@cygnus.com)
329 * compile.c: #include stdio.h for definition of NULL on
332 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
334 * compile.c (sim_load): Pass lma_p and sim_write args to
337 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
339 * configure: Regenerated to track ../common/aclocal.m4 changes.
341 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
343 * configure: Regenerated to track ../common/aclocal.m4 changes.
345 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
347 * configure: Regenerated to track ../common/aclocal.m4 changes.
349 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
351 * configure: Regenerated to track ../common/aclocal.m4 changes.
353 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
355 * configure: Regenerated to track ../common/aclocal.m4 changes.
357 Wed Sep 17 12:00:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
359 * Makefile.in (compile.o): Depend on config.h in local directory.
361 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
363 * configure: Regenerated to track ../common/aclocal.m4 changes.
365 Tue Sep 9 22:17:26 1997 Felix Lee <flee@cygnus.com>
367 * inst.h (sim_state): rename to h8300_sim_state, to avoid conflict
369 * configure.in: check for sys/param.h
370 * compile.c: #ifdef HAVE_SYS_PARAM_H.
371 #define SIGTRAP for wingdb.
372 (sim_resume): poll keyboard at least once per call.
373 (sim_resume): use host_callback instead of printf for syscall
376 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
378 * configure: Regenerated to track ../common/aclocal.m4 changes.
380 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
382 * configure: Regenerated to track ../common/aclocal.m4 changes.
385 Tue Aug 26 10:38:43 1997 Andrew Cagney <cagney@b1.cygnus.com>
387 * compile.c (sim_kill): Delete.
388 (sim_create_inferior): Add ABFD argument.
389 (sim_load): Move setting of PC from here.
390 (sim_create_inferior): To here.
391 (sim_open, sim_load, set_h8300h): Add fixme explaining why much of
392 the sim_load code should be moved to sim_open.
394 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
396 * configure: Regenerated to track ../common/aclocal.m4 changes.
399 Mon Aug 25 15:47:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
401 * compile.c (sim_open): Add ABFD argument.
403 Tue May 20 10:16:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
405 * compile.c (sim_open): Add callback argument.
406 (sim_set_callbacks): Delete SIM_DESC argument.
408 Wed Apr 30 10:22:29 1997 Doug Evans <dje@canuck.cygnus.com>
410 * compile.c (sim_load): Call bfd_get_mach instead of examining
412 * tconfig.in (SIM_PRE_LOAD): Delete, no longer used.
414 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
416 * configure: Regenerated to track ../common/aclocal.m4 changes.
418 Fri Apr 18 14:30:09 1997 Andrew Cagney <cagney@b1.cygnus.com>
420 * compile.c (sim_resume): Use poll_quit callback.
421 (sim_stop): New function.
423 Thu Apr 17 03:06:39 1997 Doug Evans <dje@canuck.cygnus.com>
425 * Makefile.in (SIM_OBJS): Add sim-load.o.
426 * compile.c (sim_kind, myname): New static locals.
427 (sim_open): Set sim_kind, myname.
428 (sim_load): Return SIM_RC. New arg abfd. Update test for h8300h.
429 Call sim_load_file to load file into simulator. Set start address
431 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
433 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
435 * configure: Regenerated to track ../common/aclocal.m4 changes.
438 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
440 * compile.c (sim_open): New arg `kind'.
442 * configure: Regenerated to track ../common/aclocal.m4 changes.
444 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
446 * configure: Regenerated to track ../common/aclocal.m4 changes.
448 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
450 * configure: Regenerated to track ../common/aclocal.m4 changes.
452 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
454 * configure: Re-generate.
456 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
458 * configure: Regenerate to track ../common/aclocal.m4 changes.
460 Thu Mar 13 12:48:05 1997 Doug Evans <dje@canuck.cygnus.com>
462 * compile.c (sim_open): New SIM_DESC result. Argument is now in
464 (other sim_*): New SIM_DESC argument.
466 Tue Feb 4 13:36:29 1997 Doug Evans <dje@canuck.cygnus.com>
468 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
469 COMMON_{PRE,POST}_CONFIG_FRAG instead.
470 * configure.in: sinclude ../common/aclocal.m4.
471 * configure: Regenerated.
473 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
475 * configure configure.in Makefile.in: Update to new configure
476 scheme which is more compatible with WinGDB builds.
477 * configure.in: Improve comment on how to run autoconf.
478 * configure: Re-run autoconf to get new ../common/aclocal.m4.
479 * Makefile.in: Use autoconf substitution to install common
482 Wed Nov 20 01:39:12 1996 Doug Evans <dje@canuck.cygnus.com>
484 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
486 * configure.in: Simplify using macros in ../common/aclocal.m4.
487 * configure: Regenerated.
488 * inst.h (enum sim_state): Define.
489 (cpu_state_type): New member `state'. Set it whenever `exception'
491 * compile.c (sim_callback): New global.
492 (sim_set_simcache_size): Renamed from sim_csize.
493 (sim_resume, case O_SLEEP): Add right way to decode r0 but #if 0 out
494 'cus it can't work. Change main loop exit test to use cpu.state.
495 (sim_trace): New function.
496 (sim_stop_reason): Add right way to set results, but #if 0 out.
497 (sim_size): New function.
498 (sim_info): Redirect calls to printf_filtered through callback.
499 (sim_set_callbacks): Record callback.
500 * run.c: Deleted, using one in ../common now.
501 * tconfig.in: New file.
503 Thu Oct 3 16:13:18 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
505 * Makefile.in (mostlyclean): Don't remove config.log here.
507 Fri Aug 9 22:59:11 1996 Jeffrey A Law (law@cygnus.com)
509 * compile.c (sim_resume): rts, sleep, bpt and nop have
510 no associated "size".
512 Tue Jul 9 22:15:39 1996 Jeffrey A Law (law@cygnus.com)
514 * compile.c (sim_resume): Fix all rotate-by-2-bits insns.
516 Tue Jul 2 23:08:45 1996 Jeffrey A Law (law@cygnus.com)
518 * run.c (main): Don't "load" sections which don't have
520 * compile.c (sim_resume, case "O_NOT"): Use ONOT instead
523 (sim_resume, shift/rotate cases): Add support for shift/rotate
525 (OSHIFTS): Corresponding changes.
527 Tue Jul 2 01:37:27 1996 Jeffrey A Law (law@cygnus.com)
529 * compile.c (sim_resume): Handle "ldm.l" and "stm.l".
531 Wed Jun 26 08:58:53 1996 Jeffrey A Law (law@cygnus.com)
533 * compile.c (h8300smode): Declare.
535 Wed Jun 26 12:20:56 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
537 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
538 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
540 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
541 (AC_PROG_INSTALL): Added.
542 * configure: Rebuilt.
544 Tue Jun 18 16:31:10 1996 Jeffrey A. Law <law@rtl.cygnus.com>
546 * compile.c (sim_load): Treat the H8/S like the H8/300H for now.
547 * run.c (main): Treat the H8/S like the H8/300H for now.
549 Fri May 24 10:35:25 1996 Jeffrey A Law (law@cygnus.com)
551 * compile.c (SEXTCHAR): Clear upper bits when sign
554 Wed May 22 22:23:37 1996 Jeffrey A Law (law@cygnus.com)
556 * compile.c (sim_resume): Correctly handle divu.
558 Tue May 7 02:13:05 1996 Jeffrey A Law (law@cygnus.com)
560 * compile.c (sim_resume): Never allow the PC to have an
563 Fri Apr 12 16:50:37 1996 Jeffrey A Law (law@cygnus.com)
565 * inst.h: Expand on comments regarding H8300H_MSIZE. Note
566 separate memory is allocate for the 8-bit area.
567 (struct cpu_state_type): Add new "eightbit' field.
568 * compile.c (GET_MEMORY_L): Handle access into the 8-bit
570 (GET_MEMORY_W, GET_MEMORY_B): Likewise.
571 (SET_MEMORY_L, SET_MEMORY_W, SET_MEMORY_B): Likewise.
572 (init_pointers): Initialize space for the 8-bit area.
573 (sim_write): Handle writing into the 8-bit area.
574 (sim_read): Handle reading from the 8-bit area.
575 (sim_load): Reallocate space for the 8-bit area.
577 * compile.c (sim_load): Re-allocate memory for the simulator
580 Fri Apr 12 09:39:56 1996 Jeffrey A Law (law@cygnus.com)
582 * compile.c (sim_resume): Fix and simplify overflow and carry
583 handling for 32bit ALU insns.
585 Mon Apr 8 23:58:49 1996 Jeffrey A Law (law@cygnus.com)
587 * compile.c (sim_resume): Fix overflow checks for ALU insns.
589 Fri Apr 5 17:20:59 1996 Jeffrey A Law (law@cygnus.com)
591 * compile.c (decode): Use "bit" to hold L_3 immediates instead
592 of holding them in "abs". Handle ABS8MEM memory references aka
593 8-bit area. Replace ABSMOV references with ABS8MEM.
595 Wed Mar 13 17:43:56 1996 Jeffrey A Law (law@cygnus.com)
597 * compile.c (fetch): Handle accesses to the exception/function
600 Mon Mar 11 09:53:25 1996 Doug Evans <dje@charmed.cygnus.com>
602 * compile.c: #include "wait.h".
603 (sim_resume, sleep insn): Check program exit status in r0.
604 (sim_resume, shift insns): Fix setting of overflow flag for shal.
605 * run.c: #include <signal.h>.
606 (main): Abort if program got SIGILL.
607 Print error message if argument is invalid.
608 (usage): Improve text.
610 Wed Feb 21 12:15:00 1996 Ian Lance Taylor <ian@cygnus.com>
612 * configure: Regenerate with autoconf 2.7.
614 Thu Jan 4 11:52:53 1996 Doug Evans <dje@canuck.cygnus.com>
616 * inst.h (MPOWER,MSIZE): Deleted.
617 (H8300{,H}_MSIZE): Define.
618 * compile.c (memory_size): New static global.
619 (init_pointers): Set memory size from one of H8300{,H}_MSIZE.
620 (sim_write,sim_read): Use memory_size.
622 Fri Oct 13 15:03:19 1995 steve chamberlain <sac@slash.cygnus.com>
624 * compile.c (sim_set_callbacks): New.
626 Tue Oct 10 11:11:26 1995 Fred Fish <fnf@cygnus.com>
628 * Makefile.in (BISON): Remove macro.
630 Wed Sep 20 13:35:02 1995 Ian Lance Taylor <ian@cygnus.com>
632 * Makefile.in (maintainer-clean): New synonym for realclean.
634 Fri Sep 8 12:18:53 1995 Ian Lance Taylor <ian@cygnus.com>
636 * Makefile.in (install): Don't install in $(tooldir).
638 * configure.in: Call AC_CONFIG_HEADER. Don't try to use
639 bfd/hosts/*.h file or bfd/config/*.mh file. Call AC_PROG_CC and
640 AC_PROG_RANLIB. Substitute in values for CFLAGS, HDEFINES and AR.
641 Call AC_CHECK_HEADERS for stdlib.h and time.h. Touch stamp.h if
643 * configure: Rebuild.
644 * config.in: New file, created by autoheader.
645 * Makefile.in (AR): Define as @AR@.
646 (CC): New variable, defined as @CC@.
647 (CFLAGS): Define as @CFLAGS@.
648 (RANLIB): Define as @RANLIB@.
649 (HDEFINES, TDEFINES): New variables.
650 (@host_makefile_frag@): Remove.
651 (compile.o, run.o): Depend upon config.h.
652 (mostlyclean): Make the same as clean, not distclean.
653 (clean): Remove config.log.
654 (distclean): Remove config.h and stamp-h.
655 (Makefile): Don't depend upon @frags@. Just rebuild Makefile when
656 invoking config.status.
657 (config.h, stamp-h): New targets.
658 * compile.c: Include "config.h". Don't include <sys/times.h>.
659 Include <time.h> and <stdlib.h> if they exist. Don't include
661 (get_now): Remove unused local b.
662 * run.c: Include "config.h". Include <stdlib.h> if it exists.
663 Don't include "sysdep.h".
664 * writecode.c: Don't include "bfd.h" or "sysdep.h". Include
667 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
669 * Update all FSF addresses except those in COPYING* files.
671 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
673 * Makefile.in (clean): Remove run.
674 (distclean): Remove Makefile.
678 * Makefile.in, configure.in: converted to autoconf.
679 * configure: New file, generated with autconf 2.4.
681 Fri Jun 30 16:50:24 1995 Stan Shebs <shebs@andros.cygnus.com>
683 * compile.c (sim_do_command): New function.
685 Tue Jun 20 16:18:13 1995 Steve Chamberlain <sac@slash.cygnus.com>
687 * compile.c (get_now): Don't do if win32.
688 (sim_resume): Poll in win32 too.
690 Wed May 24 16:31:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
692 * configure.in: Fix typo in last change.
694 Mon Mar 27 10:32:34 1995 J.T. Conklin <jtc@rtl.cygnus.com>
696 * run.c: parse arguments with getopt().
698 Tue Feb 28 17:30:08 1995 Ian Lance Taylor <ian@cygnus.com>
700 * configure.in: Use ../../bfd/hosts/std-host.h if specific
703 Sun Jan 22 12:35:43 1995 Steve Chamberlain <sac@splat>
705 * compile.c (sim_resume): Initialize cpu.mask.
707 Thu Sep 8 16:53:00 1994 Steve Chamberlain (sac@jonny.cygnus.com)
709 * inst.h (MPOWER): Bump simulated memory size to 2^18 bytes.
711 Wed May 18 13:47:58 1994 Doug Evans (dje@canuck.cygnus.com)
713 * compile.c: #include "bfd.h".
714 (sim_*): Set result type to void where there isn't one.
715 (sim_resume, default case): Set cpu.exception to SIGILL.
717 (sim_set_pc): Delete.
718 (sim_info): Delete printf_fn arg, all callers changed.
719 Call printf_filtered.
720 (set_h8300h): New arg `flag', all callers changed.
721 (sim_close): New function.
722 (sim_load): New function.
723 (sim_create_inferior): Renamed from sim_set_args, all callers changed.
724 * run.c: #include <varargs.h>, "remote-sim.h".
725 (printf_filtered): New function.
727 Fri May 13 18:32:27 1994 Doug Evans (dje@canuck.cygnus.com)
729 * compile.c (decode): Fix typo (16 bit branches).
730 (*): Some white space clean up.
732 Fri May 6 13:44:01 1994 Steve Chamberlain (sac@jonny.cygnus.com)
734 * compile.c (decode): Compile 16bit branches properly.
736 Sat Dec 11 16:32:36 1993 Steve Chamberlain (sac@thepub.cygnus.com)
738 * compile.c: Tidy up formatting. (sim_resume): Add orc, xorc,
739 andc. Poll for interrupts.
741 Thu Oct 28 19:29:34 1993 Doug Evans (dje@canuck.cygnus.com)
743 * compile.c: #include "ansidecl.h" for remote-sim.h.
745 Tue Oct 26 09:43:36 1993 Doug Evans (dje@canuck.cygnus.com)
747 * Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
748 * compile.c: #include "remote-sim.h".
749 (sim_resume): New arg siggnal.
750 (sim_write): Use SIM_ADDR for type of arg addr.
751 Always return a value.
753 (sim_store_register): Result is type int.
754 (sim_fetch_register): Ditto.
755 (sim_stop_reason): Renamed from sim_stop_signal.
756 (sim_set_pc): Use SIM_ADDR for type of arg pc.
757 (sim_info): int result, new arg printf_fn.
758 (sim_kill): int result.
759 (sim_open): int result, new arg name.
760 * run.c (main): Use sim_set_pc to set pc.
761 Update call to sim_info.
763 Sat Oct 23 15:01:18 1993 Doug Evans (dje@canuck.cygnus.com)
765 * compile.c (sim_stop_signal): Result is now enum sim_stop.
767 Fri Oct 15 23:49:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
769 * compile.c (sim_kill, sim_open, sim_set_args): New functions.
771 Thu Oct 7 16:24:10 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
773 * compile.c (sim_set_pc): Write to the pc direcly.
774 (sim_store_register): Now value is passed by reference. (sim_read,
775 sim_write): Return number of bytes copied.
777 Tue Aug 17 07:16:15 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
779 * compile.c (mop): New function to do multiplies.
781 Fri Jul 16 13:53:53 1993 Doug Evans (dje@canuck.cygnus.com)
783 * compile.c (sim_resume): Add support for nop insn.
785 Thu Jul 15 09:59:01 1993 Doug Evans (dje@canuck.cygnus.com)
787 * compile.c: Reset HMODE back to zero (accidently set it to 1).
789 * run.c (main): If h8/300h binary detected, call set_h8300h.
790 * compile.c (sim_resume): Fix O_NEG insn.
792 Fri Jul 9 14:36:48 1993 Doug Evans (dje@canuck.cygnus.com)
794 * run.c (main): Add -h flag to enable h8/300h emulation.
795 * compile.c: Rename Hmode to HMODE (consistency with gdb).
796 (set_h8300h): New function.
797 (sim_resume): Add support for extu,exts insns.
798 (sim_resume): Fix logical right shifting.
799 (sim_resume, label alu32): Fix setting of carry flag.
801 Sun Jul 4 00:35:41 1993 Doug Evans (dje@canuck.cygnus.com)
803 * compile.c (sim_csize): Initialize cpu.cache.
805 Fri Jul 2 17:42:59 1993 Doug Evans (dje@canuck.cygnus.com)
807 * Makefile.in: Add -I../../bfd to pick up bfd.h.
809 Thu Jun 24 13:40:12 1993 Doug Evans (dje@canuck.cygnus.com)
811 * run.c (main): Fix parsing of args.
813 * compile.c (sim_resume): Fix shll insn.
815 Tue Jun 8 14:16:46 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
817 * compile.c: New file, supports H8/300H.
818 * p1,p3, gencode.c, state.h, writecode.c All dead and obsolete.
820 Tue Jun 1 11:14:59 1993 Steve Chamberlain (sac@thepub.cygnus.com)
822 * run.c (main): Add -v to print info.
823 * p3.c (sim_info): New function.
825 Mon Mar 15 15:48:31 1993 Ian Lance Taylor (ian@cygnus.com)
827 * h8300.mt (DO_INSTALL): Renamed from INSTALL.
829 Wed Mar 3 15:06:53 1993 Steve Chamberlain (sac@poseidon.cygnus.com)
831 * Makefile.in: Don't use cb or indent
832 * p1.c, state.h, writecode.c: lint
834 Mon Feb 1 16:44:58 1993 John Gilmore (gnu@cygnus.com)
836 * Makefile.in: Make SunOS halfdone VPATH work.
837 * p1.c: Lint picked up by HP native compiler.
839 Mon Jan 4 12:32:35 1993 Steve Chamberlain (sac@wahini.cygnus.com)
841 * p1.c (sim_resume): when running on dos, any character typed to
842 the keyboard will cause a simulated exception.
844 Sun Jan 3 14:15:07 1993 Steve Chamberlain (sac@thepub.cygnus.com)
846 * p1.c, p3.c, run.c, writecode.c: all used h8/300 opcodes in and
849 Tue Dec 22 13:56:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)