2011-07-22 H.J. Lu * config/tc-i386.c (cpu_arch): Add k1om. (i386_align_code): Handle PROCESSOR_K1OM. (check_cpu_arch_compatible): Check EM_K1OM. (i386_arch): Handle Intel K1OM. (i386_mach): Return bfd_mach_k1om for Intel K1OM. (i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel K1OM. * config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New. (processor_type): Add PROCESSOR_K1OM. * doc/c-i386.texi: Document k1om. 2011-07-18 H.J. Lu * doc/c-i386.texi: Fix a typo. 2011-07-06 Aurelien Jarno * config/tc-mips.c (append_insn): delete prev_pinfo2 and pinfo2. 2011-07-04 Richard Sandiford * config/tc-mips.c (gpr_read_mask, gpr_write_mask): Fix handling of register 0. 2011-07-04 Maciej W. Rozycki * config/tc-mips.c (append_insn): Make sure DWARF-2 location information is properly adjusted for branches that get swapped. 2011-07-03 Samuel Thibault Thomas Schwinge PR binutils/12913 * config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of ELFOSABI_LINUX alias. * config/tc-ia64.c: Likewise. 2011-06-30 Paul Carroll * config/tc-arm.c (do_t_add_sub): Only allow LSL shifts of less than 4 in Thumb mode. 2011-06-30 Nick Clifton PR gas/12848 * config/tc-arm.c (BAD_RANGE): New error message define. (md_apply_fix): Use it. Fix range check for thumb branch instructions. 2011-06-29 Richard Sandiford * config/tc-mips.c (append_method): New enum. (can_swap_branch_p, get_append_method): New functions. (append_insn): Use get_append_method to decide how the instruction should be added. 2011-06-29 Richard Sandiford * config/tc-mips.c (append_insn): Remove bogus goto. 2011-06-29 Richard Sandiford * config/tc-mips.c (append_insn): Always clear the history after an unconditional branch. 2011-06-29 Richard Sandiford * config/tc-mips.c (find_altered_mips16_opcode): New function. (append_insn): Use it. 2011-06-29 Richard Sandiford * config/tc-mips.c (insn_uses_reg): Delete. (gpr_read_mask, gpr_write_mask): New functions. (fpr_read_mask, fpr_write_mask): Likewise. (insns_between, nops_for_vr4130, append_insn): Use them. 2011-06-29 Richard Sandiford * config/tc-mips.c (md_mips_end): Call mips_emit_delays. 2011-06-29 Dave Martin PR gas/12931 * config/tc-arm.c (mapping_state): When changing to ARM or THUMB state set the minimum required alignment of the section. 2011-06-29 Tristan Gingold * config/tc-i386.c (i386_mach): Convert to ISO-C. (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto. (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto. (md_section_align, tc_gen_reloc): Ditto. 2011-06-28 Tristan Gingold * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not generate dummy fix. 2011-06-28 Tristan Gingold * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc. (emit_jsrjmp): Ditto. (tc_gen_reloc): Ditto. 2011-06-28 Tristan Gingold * config/tc-alpha.c (alpha_evax_proc_hash): Remove. (alpha_evax_proc_data): New variable. (s_alpha_ent): Prevent nested function. Remove has_insert call. (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of error. Do not search in the hash table. Check if match with .ent. (s_alpha_name): Remove unused variable. (md_begin): Remove initialization of alpha_evax_proc_hash. 2011-06-27 Tristan Gingold * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter. Locally declare basesym. Add comments. Do not set literal_pool_size. (load_expression): Adjust call to add_to_link_pool. (s_alpha_pdesc): Define pdesc symbol using dot. Do not set literal_pool_size. (s_alpha_end): Use NULL instead of 0. 2011-06-27 Tristan Gingold * config/obj-evax.c (evax_frob_file_before_adjust): Add comments. Fix style. * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg field. Add comments. (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove 2011-06-26 Richard Sandiford * config/tc-mips.c (fix_24k_record_store_info): If the previous instruction was a store, and the next instructions are unknown, assume the worst. 2011-06-25 Richard Sandiford PR gas/12915 * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn) (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters. (mips_emit_delays, start_noreorder): Update accordingly. (append_insn): Likewise. Revert original fix for this PR and use the ignore parameter instead. 2011-06-24 Tristan Gingold PR gas/11625 * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort. 2011-06-24 Tristan Gingold * config/tc-alpha.c (add_to_link_pool): Remove useless offset variable. Fix style. 2011-06-23 Richard Sandiford PR gas/12915 * config/tc-mips.c (append_insn): Only consider hazards between the pre-noreorder block and ip. 2011-06-21 Sameera Deshpande * config/tc-arm.c (vfp_conv): Add check on range of immediate operand in vcvt instruction between floating-point and fixed-point. (operand_parse_code): Add "OP_oI32z". (parse_operands): OP_oI32z case added. 2011-06-20 H.J. Lu * configure.tgt: Revert x32 change. 2011-06-20 Nick Clifton * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi. * doc/Makefile.in: Regenerate. * doc/all.texi: Set XSTORMY16. * doc/c-xstormy16.texi: New file. 2011-06-19 H.J. Lu * configure.tgt: Support x32. 2011-06-15 Nick Clifton * NEWS: Mention addition of TILEPRO and TIKE-Gx support. 2011-06-14 Tristan Gingold * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within. (tc_new_dot_label): Define. (ppc_new_dot_label): Declare. * config/tc-ppc.c (ppc_frob_label): Set within target field. (ppc_fix_adjustable): Use this field to adjust the reloc. (ppc_new_dot_label): New function. 2011-06-14 Alan Modra * po/POTFILES.in: Regenerate. 2011-06-13 Walter Lee * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and config/tc-tilepro.c. (TARGET_CPU_HFILES): Add config/tc-tilegx.h and config/tc-tilepro.h. * Makefile.in: Regenerate. * configure.tgt (tilepro-*-*): New. (tilegx-*-*): Likewise. * config/tc-tilegx.c: New file. * config/tc-tilegx.h: Likewise. * config/tc-tilepro.h: Likewise. * config/tc-tilepro.c: Likewise. * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and c-tilepro.texi. * doc/Makefile.in: Regenerate. * doc/all.texi (TILEGX): Define. (TILEPRO): Define. * doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include c-tilegx.texi and c-tilepro.texi. * doc/c-tilegx.texi: New. * doc/c-tilepro.texi: New. 2011-06-13 Nick Clifton PR gas/12854 * config/tc-arm.c (do_shift): Do not allow shift operations at the end of a register based shift insn. (do_t_shift): Likewise. 2011-06-13 Nick Clifton * config/tc-score.c (s3_my_get_expression): Delete unused local variable 'seg'. (s3_do_ldst_insn): Delete unused local variable 'strbak'. (s3_do16_ldst_insn): Delete unused local variable 'temp'. (s3_do_macro_bcmp): Zero inst_expand array. (s3_do_macro_bcmpz): Likewise. (s3_s_score_end): Delete unused local variable 'dot'. (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'. * config/tc-score7.c (s7_my_get_expression): Delete unused local variable 'seg'. (s7_do_ldst_insn): Delete unused local variable 'strbak'. (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and 'r_new'. (s7_s_score_end): Delete unused local variable 'dot'. (s7_relax_frag): Delete unused local variable 'relax_size'. (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'. 2011-06-10 H.J. Lu AVX Programming Reference (June, 2011) * config/tc-i386.c (i386_error): Add invalid_vsib_address and unsupported_vector_index_register. (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid. (check_VecOperands): New. (match_template): Call check_VecOperands. Handle invalid_vsib_address and unsupported_vector_index_register. (build_modrm_byte): Support VecSIB. Check register-only source operand when two source operands are swapped. (i386_index_check): Allow Xmm/Ymm index registers. * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt and invpcid./invpcid. 2011-06-09 Nick Clifton PR gas/12861 * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable code. (check_cinv_options): Remove unused local variables. Make function void. (md_assemble): Remove unused local variable. 2011-06-09 James Greenhalgh * config/tc-arm.c (do_ldrd): Warn in unpredictable cases. 2011-06-03 Arnaud Patard PR gas/12698 * config/tc-arm.c (parse_psr): Set m_profile to false when assembling for any architecture. 2011-06-02 Jie Zhang jie@codesourcery.com Nathan Sidwell nathan@codesourcery.com * config/tc-arm.c (parse_address_main): Handle -0 offsets. (encode_arm_addr_mode_2): Set default sign of zero here ... (encode_arm_addr_mode_3): ... and here. (encode_arm_cp_address): ... and here. (md_apply_fix): Use default sign of zero here. 2011-06-02 Nick Clifton * as.c: Fix spelling typo. * read.c: Likewise. * config/tc-ppc.c: Likewise. * po/gas.pit: Regenerate. 2011-05-31 Paul Brook * config/tc-arm.c (arm_cpus): Add Cortex-R5. (arm_extensions): Allow idiv on ARMv7-R. * doc/c-arm.text: Update idiv extension restrictions. 2011-05-31 Paul Brook * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative loads. 2011-05-31 Paul Brook * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant addresses. 2011-05-31 Paul Brook Nathan Sidwell * config/tc-arm.c (fix_new_arm): Create an absolute symbol for pc-relative fixes to constants. * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define. 2011-05-27 Nick Clifton * config/tc-s390.c (md_begin): Remove unused variable dup_insn. 2011-05-24 Andreas Krebbel * config/tc-s390.c (md_gather_operands): Fix check for floating register pair operands. 2011-05-24 Andreas Krebbel * config/tc-s390.c (md_gather_operands): Emit an error for odd numbered registers used as register pair operand. 2011-05-23 Nick Clifton * config/tc-v850.h (TC_FX_SIZE_SLACK): Define. 2011-05-20 Bernd Schmidt * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset". (tic6x_parse_name): Handle it. (tic6x_fix_new_exp): Handle O_pcr_offset. (tic6x_fix_adjustable): Return 0 for the new relocs. (md_apply_fix): Handle them. (tc_gen_reloc): Likewise. * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member. 2011-05-18 Nick Clifton PR gas/12754 * config/tc-tic30.c (ordinal_names): Allow translation of the ordinal names. 2011-05-18 Nick Clifton * config/tc-arm.c (s_unreq): Reword warning message to make it easier to translate. * config/tc-ia64.c (md_show_usage): Add note for translators. * configure.in (ALL_LINGUAS): Add "fi". * configure: Regenerate. 2011-05-18 Tristan Gingold * config/tc-ppc.h (ppc_tc_sy): Reorder fields. Put size into an union with dw. (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust. (ppc_xcoff_end): Declare. (md_end): Define. * config/tc-ppc.c: Add includes for xcoff. (ppc_dwsect): New function. (md_pseudo_table): Add dwsect. (struct dw_subsection): New. (dw_sections): New. (ppc_change_debug_section): New function. (ppc_xcoff_end): Ditto. (ppc_function): Adjust for ppc_tc_sy. (ppc_symbol_new_hook): Ditto. (ppc_frob_symbol): Ditto. (ppc_frob_section): Do not set vma for debug sections. (ppc_fix_adjustable): Return true for debug sections. * config/obj-coff.c: Add includes for xcoff. (coff_frob_section): Handle dwarf section. 2011-05-17 Nick Clifton * po/fi.po: New Finnish translation. * po/fr.po: Updated French translation. * config/tc-m32r.c (md_show_usage): Fix typos in descriptions. * config/tc-mt.c (md_assemble): Fix typos in warning messages. * cond.c (s_else): Fix typos in error messages. * config/tc-pj.c (md_assemble): Fix typo in error message. 2011-05-16 Hans-Peter Nilsson * config/tc-cris.c (md_parse_option) : Error if not emitting ELF object. (md_show_usage): Only mention --pic if the assembler can generate ELF objects. * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a prerequisite for --pic being a valid option. 2011-05-13 Frederic Marchal PR gas/12755 * config/tc-v850.c (parse_register_list): Correct error string. 2011-05-12 Quentin Neill * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD. (i386_align_code): Ditto 2011-05-12 Matthew Gretton-Dann PR gas/12715 * config/tc-arm.c (parse_big_immediate): Fix parsing of 64-bit immediates on 32-bit hosts. 2011-05-10 Quentin Neill * config/tc-i386.c (cpu_arch): Add bdver2 and rename PROCESSOR_BDVER1 to PROCESSOR_BDVER. (i386_align_code): Rename PROCESSOR_BDVER1. (processor_type): Ditto. * doc/c-i386.texi: Add bdver2. 2011-05-10 Alan Modra * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error. 2011-05-09 Paul Brook * config/tc-tic6x.c (streq): Define. (tic6x_get_unwind): New. (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp, s_tic6x_personalityindex, s_tic6x_personality): New functions. (md_pseudo_table): Add "endp", "handlerdata", "personalityindex", "personality" and "cantunwind". (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions, tic6x_start_unwind_section, tic6x_unwind_frame_regs, tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big, tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word, tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb, tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding, tic6x_cfi_endproc): New. * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define. (tic6x_unwind_info): New. (tic6x_segment_info_type): Add marked_pr_dependency, unwind and text_unwind. (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum, tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc, tc_cfi_section_name): Define. * doc/c-tic6x.texi: Document new unwinding directives. * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default definitions. (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr): Move to dw2gencfi.h. (CFI_EMIT_target): Define. (dot_cfi_sections): Check tc_cfi_section_name. (dot_cfi_startproc): Use tc_cfi_startproc. (dot_cfi_endproc): Use tc_cfi_endproc. * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr): Move to here from dw2gencfi.c. 2011-05-07 Alan Modra * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define. Use throughout in place of #if SUPPORT_FRAME_LINKONCE. (struct fde_entry): Rename cseg to cur_seg. (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED. (get_cfi_seg): Likewise. Use if (SUPPORT_FRAME_LINKONCE) rather that #if SUPPORT_FRAME_LINKONCE. (cfi_finish): Likewise. 2011-05-06 Tristan Gingold * read.c (s_comm_internal): Remove code for OBJ_VMS. (s_data): Ditto. (s_text): Ditto. * write.c (write_object_file): Ditto. * symbols.c (define_sym_at_dot): Ditto. (colon): Ditto. 2011-05-05 Alan Modra * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define. Use throughout file to conditionally compile code added 2011-04-26. (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used when SUPPORT_FRAME_LINKONCE. (get_cfi_seg): Likewise. Reintroduce old code for when not SUPPORT_FRAME_LINKONCE. (cfi_finish): Move get_cfi_seg calls out of loop when not SUPPORT_FRAME_LINKONCE. Avoid unused var warning. 2011-05-03 Paul Brook * config/tc-tic6x.c (s_ehtype): New function. (md_pseudo_table): Add "ehtype". (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE. * doc/c-tic6x.texi: Document .ehtype directive. 2011-04-26 Kai Tietz * dw2gencfi.c (dwcfi_seg_list): New struct. (dwcfi_hash): New static hash variable. (get_debugseg_name): New. (alloc_debugseg_item): New. (make_debug_seg): New. (dwcfi_hash_insert): New. (dwcfi_hash_find): New. (dwcfi_hash_find_or_make): New. (cfi_insn_data): New member cur_seg. (cie_entry): Likewise. (fde_entry): New cseg and handled members. (alloc_fde_entry): Initialize cseg member. (alloc_cfi_insn_data): Initialize cur_seg member. (dot_cfi_sections): Compare for beginning of section names via strncmp. (get_cfi_seg): New. (cfi_finish): Treat link-once sections. (is_now_linkonce_segment): New local helper. (output_cie): Ignore cie entries not member of current segment. (output_fde): Likewise. (select_cie_for_fde): Likewise. (cfi_change_reg_numbers): Add new argument for current segment and ignore insn elements, if not part of current segment. * ehopt.c (get_cie_info): Use strncmp for section name matching. (heck_eh_frame): Likewise. 2011-04-20 Catherine Moore David Ung * config/mips.c (mips_cl_insn): Add new field complete_p. (create_insn): Initialize complete_p to zero. (BASE_REG_EQ): New. (fix_24k_align_to): New. (fix_24k_store_info): Declare. (fix_24k_sort): New. (fix_24k_record_store_info): New. (nops_for_24k): New. (nops_for_insn): Call nops_for_24k. (append_insn): Move O_constant expression handling. 2011-04-20 Alan Modra * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size. (hash_new_sized): New function, split out from.. (hash_new): ..here. 2011-04-19 Nick Clifton * config/tc-arm.c (v7m_psrs): Revert previous delta. 2011-04-18 Julian Brown Nick Clifton * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to detect M-profile targets. (do_t_swi): Exclude v7 and higher variants from arm_ext_os test. (v7m_psrs): Fix typo: basepri_max should be basepri_mask. 2011-04-14 Andreas Krebbel * config/tc-s390.c (s390_machine): New prototype. (md_pseudo_table): New pseudo-op .machine. (s390_opcode_hash): Initialize to NULL. (s390_parse_cpu): New function. (md_parse_option): Use s390_parse_cpu. (s390_setup_opcodes): New function. (md_begin): Use s390_setup_opcodes. (s390_machine): New hook handling the new .machine pseudo. * doc/c-s390.texi: Document the new pseudo op .machine. 2011-04-12 H.J. Lu * config/tc-i386.c (i386_mach): Start error message with lower case. (md_begin): Likewise. (md_parse_option): Likewise. (i386_target_format): Likewise. (check_byte_reg): Likewise. (check_long_reg): Likewise. (check_qword_reg): Likewise. (check_word_reg): Likewise. 2011-04-12 Nick Clifton PR gas/12532 * config/tc-arm.c (relax_branch): Do not relax branches to preemptable global symbols. 2011-04-11 Julian Brown * config/tc-arm.c (parse_psr): Add LHS argument. Improve support for *APSR bitmasks. (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR. Remove OP_RVC_PSR. (parse_operands): Likewise. (do_mrs): Tweak error message for constraint. (do_t_mrs): Update constraints for changes to APSR support. (do_t_msr): Likewise. Don't set PSR_f flag here. (psrs): Remove "g", "nzcvq", "nzcvqg". (insns): Tweak entries for msr and mrs instructions. 2011-04-11 Kai Tietz * config/tc-i386.c (x86_cons): Initialize adjust with zero. 2011-04-11 Nick Clifton * config/tc-i386.c (x86_cons): Define even for non-ELF targets. * config/tc-i386.h (x86_cons): Always prototype. * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter in order to avoid a compile time warning. (getprocreg_image): Likewise. 2011-04-11 Alan Modra * config/tc-cr16.c (getprocreg_image): Correct range check. (getprocregp_image): Likewise. 2011-04-06 Joseph Myers * configure.tgt (strongarm*be, strongarm*b, strongarm*, xscale*be|xscale*b, xscale*): Remove architectures. (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe, thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets. 2011-04-01 Tristan Gingold * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning. 2011-03-31 Bernd Schmidt * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New static variables. (md_begin): Initialize them. (s_tic6x_scomm): New static function. (md_pseudo_table): Add "scomm". (tc_gen_reloc): Really undo all adjustments made by bfd_install_relocation. * doc/c-tic6x.texi: Document the .scomm directive. 2011-03-31 Tristan Gingold * dwarf2dbg.c (DWARF2_VERSION): Define. (out_debug_line): Use it. (out_debug_aranges): Ditto. (out_debug_info): Ditto. * config/tc-ia64.h (DWARF2_VERSION): Override it. 2011-03-30 Michael Snyder * obj-elf.c (obj_elf_section): Free malloced name. * macro.c (get_any_string): Free malloced br_buf. (do_formals): Free 'formal'. 2011-03-30 Tristan Gingold * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value to offset only if within is set. (ppc_stabx): Reformat. For stsym stabs, add a check and set within only for symbols. 2011-03-29 Richard Henderson PR 12610 * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous label; zap alpha_insn_label. 2011-03-29 H.J. Lu * config/tc-i386.c (handle_quad): Properly handle multiple operands. 2011-03-29 Mike Frysinger * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest reg $2 is the same as dest reg $4. 2011-03-29 Mike Frysinger * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest reg $2 is the same as dest reg $4. 2011-03-29 Mike Frysinger * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest reg $2 is the same as dest reg $4. 2011-03-28 Mike Frysinger * config/bfin-parse.y (16bit acc add): Return yyerror when dest reg $1 is the same as dest reg $7. 2011-03-28 H.J. Lu * config/tc-i386.c (handle_quad): New. (md_pseudo_table): Add "quad". 2011-03-26 John Marino * configure.tgt: Fix support for *-*-dragonfly*. * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly. * config/te-dragonfly.h: New file. 2011-03-24 Eric B. Weddington * config/tc-avr.c (mcu_types): Add new devices: atmega325pa, atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb, at90pwm161. * doc/c-avr.texi: Document new device names. 2011-03-24 Mike Frysinger * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest reg $1 is the same as dest reg $7. (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as dest reg $7. 2011-03-24 Mike Frysinger * config/bfin-parse.y (check_macfuncs): Clarify error message when P is mismatched. Check destination regno are off by one when P is set, or are equal when P is not set. 2011-03-23 Mike Frysinger * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is the same as dest reg $4. (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5. 2011-03-23 Eric B. Weddington * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u, atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu. * doc/c-avr.texi: Document new device names. 2011-03-22 Eric B. Weddington * config/tc-avr.c (struct avr_opcodes_s): Add opcode field. (AVR_INSN): Change definition to match. (avr_opcodes): Likewise, change to match. (mcu_types): Add XMEGA architecture names and new XMEGA device names. (md_show_usage): Add XMEGA architecture names. (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices. Add support for SPM Z+ instruction. * doc/c-avr.texi: Add documentation for XMEGA architectures and devices. 2011-03-21 Eric B. Weddington * config/tc-avr.c (md_show_usage): Add "Assembler" text to output. 2011-03-18 Alan Modra * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol on .size expression errors rather than symbols in the size expression. 2011-03-18 Alan Modra * input-scrub.c (line_numberT): Delete. (input_scrub_close): Reset line counters. * messages.c (as_show_where): Don't print invalid line number. (as_warn_internal, as_bad_internal): Likewise. 2011-03-18 Alan Modra * read.c (read_a_source_file): Remove md_after_pass_hook. Move "quit" label before set of dot_symbol. * config/tc-d10v.h (md_after_pass_hook): Don't define. * config/tc-d30v.h (md_after_pass_hook): Likewise. * config/tc-m32r.h (md_after_pass_hook): Likewise. (md_cleanup): Define to call m32r_fill_insn. 2011-03-18 Andreas Krebbel * config/tc-s390.c (md_parse_option): Add -march=all option which switches to the highest available CPU. 2011-03-17 Alan Modra PR 12569 * expr.c (operand): Correct passing of "mode" to expr. * read.c (do_org): Allow expr_section. (get_known_segmented_expression): Don't assert anything about the segment. 2011-03-16 H.J. Lu * as.c (show_usage): Add --size-check=. (parse_args): Add and handle OPTION_SIZE_CHECK. * as.h (flag_size_check): New. * config/obj-elf.c (elf_frob_symbol): Use as_bad to report bad .size directive only for --size-check=error. * doc/as.texinfo: Document --size-check=. 2011-03-14 Mike Frysinger * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for bf542/bf544/bf547/bf548/bf549. 2011-03-14 Richard Sandiford * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to determine whether a relocation is needed. (md_apply_fix, arm_apply_sym_value): Likewise. 2011-03-14 Richard Sandiford * config/tc-arm.c (arm_adjust_symtab): Set the branch type for Thumb symbols. 2011-03-11 Nick Clifton * remap.c (remap_debug_filename): Always allocate a buffer for the returned pointer. * stabs.c (stabs_generate_asm_file): Free the pointer returned by remap_debug_filename. 2011-03-10 Michael Snyder Revert the following change: * dwarf2dbg.c (out_file_list): Free malloced 'dir'. (out_debug_info): Free malloced 'dirname' and 'comp_dir'. 2011-03-10 Alan Modra * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define. * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field. 2011-03-09 Michael Snyder * dwarf2dbg.c (out_file_list): Free malloced 'dir'. (out_debug_info): Free malloced 'dirname' and 'comp_dir'. (emit_fixed_inc_line_addr): Assign instead of conditional in assert. 2011-03-05 H.J. Lu * config/obj-elf.c (elf_frob_symbol): Mention symbol name in non-constant .size expression. 2011-03-02 Nick Clifton * ecoff.c: Incldue filenames.h 2011-02-28 Kai Tietz * depend.c (register_dependency): Use filename_(n)cmp. * dwarf2dbg.c (get_filenum): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * input-scrub.c (new_logical_line_flags): Likewise. * listing.c (file_info): Likewise. (listing_newline): Likewise. * remap.c (remap_debug_filename): Likewise. * stabs.c (generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. 2011-02-28 Maciej W. Rozycki * config/tc-mips.c (append_insn): Disable branch relaxation for DSP instructions. 2011-02-28 Maciej W. Rozycki * config/tc-mips.c (macro): Handle M_PREF_AB. 2011-02-28 Maciej W. Rozycki * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary register to use. (RELAX_BRANCH_UNCOND): Adjust accordingly. (RELAX_BRANCH_LIKELY): Likewise. (RELAX_BRANCH_LINK): Likewise. (RELAX_BRANCH_TOOFAR): Likewise. (RELAX_BRANCH_AT): New macro. (append_insn): Encode the temporary register to use in standard MIPS branch relaxation. (relaxed_branch_length): Update according to changes to RELAX_BRANCH_ENCODE. (md_convert_frag): Use the encoded register as the temporary. 2011-02-28 Maciej W. Rozycki * config/tc-mips.c (mips_fix_adjustable): On REL targets also reject PC-relative relocations. 2011-02-28 Maciej W. Rozycki * config/tc-mips.c (md_convert_frag): Correct message capitalization. 2011-02-28 Alan Modra * symbols.c (report_op_error): Remove unnecessary forward declaration. Add "op" parameter. Report operator and operand segments in error message, not operand symbols. (resolve_symbol_value): Always set segment for equated symbols, not just when finalizing. Adjust report_op_error calls. 2011-02-25 H.J. Lu * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations if 64bit relocations aren't allowed. 2011-02-25 Alan Modra PR gas/12519 * config/obj-elf.c (elf_frob_symbol): Properly handle size expression. 2011-02-21 Maciej W. Rozycki * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate initialization of offset_reloc. 2011-02-15 Richard Henderson * dw2gencfi.c (dot_cfi_dummy): New. (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New. * read.c (pobegin): Unconditionally call cfi_pop_insert. 2011-02-13 Ralf Wildenhues * configure: Regenerate. 2011-02-13 Mike Frysinger * config/bfin-lex.l (BYTEOP2M): Remove tokenization. * config/bfin-parse.y (BYTEOP2M): Delete token. (asm_1): Remove BYTEOP2M insn matching. 2011-02-12 Mike Frysinger * config/bfin-defs.h: Include opcode/bfin.h. (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete. 2011-02-11 Mike Frysinger * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo. (Modify Registers): Fix subtracted typo. (.byte2): Extend and swap descriptions with .byte4. (.byte4): Extend and swap descriptions with .byte2. (.db, .dw, .dd): Document behavior. 2011-02-11 Mike Frysinger * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP. 2011-02-11 Alan Modra * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify. 2011-02-10 Alan Modra * doc/as.texinfo (Overview): Add missing markup around Blackfin and PowerPC options. 2011-02-10 Alan Modra * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC. * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options. (Overview ): Add a number of missing options. * doc/c-ppc.texi: Likewise. Add markup for use in manpage generation. 2011-02-08 H.J. Lu PR gas/6957 * config/tc-i386.c (i386_align_code): Use f32_patt when tuning for i686. 2011-02-08 H.J. Lu * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags for ISA extensions. (md_parse_option): Likewise. 2011-02-04 Bernd Schmidt * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic". * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic". (TIC6X Options): Don't mention "-matomic". * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete. (md_longopts): Remove corresponding entries. (md_parse_option): Don't handle them. (md_show_usage): Don't document them. (tic6x_atomic): Delete variable. (tic6x_update_features): Always copy tic6x_arch_enable to tic6x_features. (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC. (s_tic6x_atomic, s_tic6x_noatomic): Remove functions. (md_pseudo_table): Remove ".atomic" and ".noatomic". 2011-01-31 Nick Clifton * write.c (write_contents): Include output file name and bfd error value when reporting the inability to write to the output file. * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align frag that has a non-zero fill value. 2011-01-27 DJ Delorie * config/tc-rx.c (md_convert_frag): If we can't compute the target address, zero out the values stored in the object file to make objdump's output consistent. 2011-01-26 Kai Tietz * config/tc-i386.c (md_begin): Set for x64 windows COFF target x86_dwarf2_return_column to 32. 2011-01-20 Nick Clifton PR gas/12384 * config/tc-h8300.c (constant_fits_width_p): Use correct type for comparison. 2011-01-18 H.J. Lu * write.c (compress_debug): Return if section size is smaller than 32 bytes. 2011-01-18 H.J. Lu PR gas/12409 * write.c (compress_debug): Return if section size is 0. 2011-01-18 Mingfeng Wu * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te. * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te, fmp626} options. 2011-01-18 Nick Clifton PR gas/12390 * doc/all.texi: Add NS32K * doc/as.texinfo: Remove target specific details of which characters act as comment initiators and statement separators into individual target specific files. * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of the hash character at the start of a line. * doc/c-arm.texi (ARM-Chars): Likewise. * doc/c-avr.texi (AVR-Chars): Likewise. * doc/c-d10v.texi (D10V-Chars): Likewise. * doc/c-d30v.texi (D30V-Chars): Likewise. * doc/c-mmix.texi (MMIX-Chars): Likewise. * doc/c-s390.texi (s390 characters): Likewise. * doc/c-sh.texi (SH-Chars): Likewise. * doc/c-sh64.texi (SH64-Chars): Likewise. * doc/c-sparc.texi (SPARC-Chars): Likewise. * doc/c-tic6x.texi (TIC6X Syntax): Likewise. * doc/c-xtensa.texi (Xtensa Syntax): Likewise. * doc/c-z80.texi (Z80-Chars): Likewise. * doc/c-z8k.texi (Z8000-Chars): Likewise. * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character. * doc/c-arc.texi (ARC-Chars): Fill in this subsection. * doc/c-bfin.texi (Blackfin Syntax): Document line comment and line separator characters. * doc/c-cr16.texi (CR16 Syntax): Likewise. * doc/c-i386.texi (i386-Chars): Likewise. * doc/c-i860.texi (i860-Chars): Likewise. * doc/c-i960.texi (i960-Chars): Likewise. * doc/c-ip2k.texi (IP2K-Chars): Likewise. * doc/c-lm32.texi (LM32-Chars): likewise. * doc/c-m32c.texi (M32C-Chars): Likewise. * doc/c-m68hc11.texi (M68HC11-syntax): Likewise. * doc/c-m68k.texi (M68K-Chars): Likewise. * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise. * doc/c-msp430.texi (MSP430-Chars): Likewise. * doc/c-mt.texi (MT-Chars): Likewise. * doc/c-ns32k.texi (NS32K-Chars): Likewise. * doc/c-pj.texi (PJ-Chars): Likewise. * doc/c-ppc.texi (PowerPC-Chars): Likewise. * doc/c-rx.texi (RX-Chars): Likewise. * doc/c-score.texi (SCORE-Chars): Likewise. * doc/c-tic54x.texi (TIC54X-Chars): Likewise. * doc/c-v850.texi (V850-Chars): Likewise. * doc/c-vax.texi (VAX-Chars): Likewise. * doc/c-xc16x.texi (xc16x-Chars): Likewise. 2011-01-17 Quentin Neill * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS. * doc/c-i386.texi (i386-TBM): New section. 2011-01-16 H.J. Lu * config/tc-i386.c (disallow_64bit_disp): Renamed to ... (disallow_64bit_reloc): This. (md_assemble): Don't check movabs for x32 mode here. (i386_target_format): Updated. (tc_gen_reloc): Check if 64bit relocations are allowed. 2011-01-15 H.J. Lu * config/tc-i386.c (disallow_64bit_disp): New. (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with X86_64_ABI/X86_64_X32_ABI. (md_assemble): Don't allow movabs with relocation in x32 mode. (i386_target_format): Updated. 2011-01-14 H.J. Lu * config/tc-i386.c (OPTION_N32): Renamed to ... (OPTION_X32): This. (md_longopts): Replace n32 with x32. (md_parse_option): Updated. (md_show_usage): Likewise. * doc/c-i386.texi: Replace --n32 with --x32. 2011-01-11 Mingjie Xing * config/tc-mips.c (mips_ip): Update error messages. Take an unadjusted offset for "+c" argument. 2011-01-10 Nick Clifton * config/tc-i386.c (x86_elf_abi): Only define for targets that use it. 2011-01-10 Nick Clifton * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only part of the file. 2011-01-10 Nathan Sidwell Glauber de Oliveira Costa * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and .tlsdescseq directive. * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc following a symbol. (s_arm_tls_descseq): New directive. (md_pseudo_table): Add it. (encode_branch): Allow TLS_CALL relocs too. (do_t_blx, do_t_branch23): Use encode_branch. (reloc_names): Add tlsdesc and tlscall. (md_apply_fix): Process tls desc relocations. (tc_gen_reloc): Likewise. (arm_fix_adjustable): Likewise. 2011-01-07 Quentin Neill * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS. * doc/c-i386.texi (i386-BMI): New section. 2011-01-06 Paul Koning * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative references to absolute addresses. 2011-01-05 DJ Delorie * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression instead of an RH_NEG32 one. 2011-01-05 Jonathan Wakely * doc/c-i386.texi: Clarify --n32. 2011-01-04 H.J. Lu * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit integer registers in VEX.vvvv. Check register-only source operand when two source operands are swapped. Properly update destination when two source operands are swapped. 2011-01-01 H.J. Lu * gas.c (parse_args): Update copyright to 2011. For older changes see ChangeLog-2010 Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: