BUILD_CONFIGDIRS = libiberty
BUILD_SUBDIR = @build_subdir@
-# This is set by the configure script to the arguments to use when configuring
-# directories built for the target.
-TARGET_CONFIGARGS = @target_configargs@
-
# This is set by the configure script to the arguments to use when configuring
# directories built for the build system.
BUILD_CONFIGARGS = @build_configargs@
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the host system.
+HOST_CONFIGARGS = @host_configargs@
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS = @target_configargs@
+
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
SET_LIB_PATH = @SET_LIB_PATH@
# Should be substed by configure.in
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
CC_FOR_TARGET = @CC_FOR_TARGET@
+BASE_CC_FOR_TARGET = @BASE_CC_FOR_TARGET@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
RAW_CXX_FOR_TARGET = @RAW_CXX_FOR_TARGET@
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
install-no-fixedincludes: installdirs @install_host_modules_nogcc@ \
@install_target_modules@ gcc-no-fixedincludes
-# Install the gcc headers files, but not the fixed include files,
-# which Cygnus is not allowed to distribute. This rule is very
-# dependent on the workings of the gcc Makefile.in.
-.PHONY: gcc-no-fixedincludes
-gcc-no-fixedincludes:
- @if [ -f ./gcc/Makefile ]; then \
- rm -rf gcc/tmp-include; \
- mv gcc/include gcc/tmp-include 2>/dev/null; \
- mkdir gcc/include; \
- cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
- touch gcc/stmp-fixinc gcc/include/fixed; \
- rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
- r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}` ; export s; \
- $(SET_LIB_PATH) \
- (cd ./gcc; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
- rm -rf gcc/include; \
- mv gcc/tmp-include gcc/include 2>/dev/null; \
- else true; fi
+### other supporting targets
-# These rules are used to build the modules which are built with the
-# build machine's native compiler.
+MAKEDIRS= \
+ $(DESTDIR)$(prefix) \
+ $(DESTDIR)$(exec_prefix)
+.PHONY: installdirs
+installdirs: mkinstalldirs
+ $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
-.PHONY: all-build-libiberty maybe-all-build-libiberty
-maybe-all-build-libiberty:
-all-build-libiberty:
- @if [ -f ./libiberty/Makefile ] ; then \
- r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}`; export s; \
- (cd $(BUILD_SUBDIR)/libiberty && $(MAKE) all); \
- else \
- true; \
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
fi
+dist:
+ @echo "Building a full distribution of this tree isn't done"
+ @echo "via 'make dist'. Check out the etc/ subdirectory"
+
+etags tags: TAGS
+
+# Right now this just builds TAGS in each subdirectory. emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does). We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
+
+
+# --------------------------------------
+# Modules which run on the build machine
+# --------------------------------------
+
.PHONY: configure-build-libiberty maybe-configure-build-libiberty
maybe-configure-build-libiberty:
-configure-build-libiberty:
- @if [ ! -d $(BUILD_SUBDIR) ]; then \
- true; \
- elif [ -f $(BUILD_SUBDIR)/libiberty/Makefile ] ; then \
- true; \
- elif echo " $(BUILD_CONFIGDIRS) " | grep " libiberty " >/dev/null 2>&1; then \
- if [ -d $(srcdir)/libiberty ]; then \
- [ -d $(BUILD_SUBDIR)/libiberty ] || mkdir $(BUILD_SUBDIR)/libiberty;\
+configure-build-libiberty: $(BUILD_SUBDIR)/libiberty/Makefile
+$(BUILD_SUBDIR)/libiberty/Makefile: config.status
+ @[ -d $(BUILD_SUBDIR)/libiberty ] || mkdir $(BUILD_SUBDIR)/libiberty;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(BUILD_CONFIGARGS) $${srcdiroption} \
--with-build-subdir="$(BUILD_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi; \
- else \
- true; \
- fi
+ || exit 1
+
+.PHONY: all-build-libiberty maybe-all-build-libiberty
+maybe-all-build-libiberty:
+all-build-libiberty: configure-build-libiberty
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ (cd $(BUILD_SUBDIR)/libiberty && $(MAKE) all)
-# These rules are used to build the modules which use FLAGS_TO_PASS. To
-# build a target all-X means to cd to X and make all.
+# --------------------------------------
+# Modules which run on the host machine
+# --------------------------------------
.PHONY: all-ash maybe-all-ash
maybe-all-ash:
-# These rules are used to build the modules which are built with the target
-# tools. To make foo-X means to cd to X and make foo.
+# ---------------------------------------
+# Modules which run on the target machine
+# ---------------------------------------
.PHONY: configure-target-libstdc++-v3 maybe-configure-target-libstdc++-v3
maybe-configure-target-libstdc++-v3:
-configure-target-libstdc++-v3:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out; \
- else \
- echo "Multilibs changed for libstdc++-v3, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/Makefile; \
- mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libstdc++-v3 ]; then \
- [ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
+configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/Makefile
+
+$(TARGET_SUBDIR)/libstdc++-v3/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libstdc++-v3"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libstdc++-v3/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libstdc++-v3/Makefile: config.status $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libstdc++-v3 maybe-all-target-libstdc++-v3
maybe-all-target-libstdc++-v3:
-all-target-libstdc++-v3:
+all-target-libstdc++-v3: configure-target-libstdc++-v3
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-newlib maybe-configure-target-newlib
maybe-configure-target-newlib:
-configure-target-newlib:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/newlib/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/newlib/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/newlib/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/newlib/tmpmulti.out; \
- else \
- echo "Multilibs changed for newlib, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/Makefile; \
- mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/newlib ]; then \
- [ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
+configure-target-newlib: $(TARGET_SUBDIR)/newlib/Makefile
+
+$(TARGET_SUBDIR)/newlib/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for newlib"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/newlib/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/newlib/Makefile: config.status $(TARGET_SUBDIR)/newlib/multilib.out
+ @[ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-newlib maybe-all-target-newlib
maybe-all-target-newlib:
-all-target-newlib:
+all-target-newlib: configure-target-newlib
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libf2c maybe-configure-target-libf2c
maybe-configure-target-libf2c:
-configure-target-libf2c:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libf2c/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libf2c/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libf2c/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libf2c/tmpmulti.out; \
- else \
- echo "Multilibs changed for libf2c, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/Makefile; \
- mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libf2c ]; then \
- [ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
+configure-target-libf2c: $(TARGET_SUBDIR)/libf2c/Makefile
+
+$(TARGET_SUBDIR)/libf2c/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libf2c"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libf2c/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libf2c/Makefile: config.status $(TARGET_SUBDIR)/libf2c/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libf2c maybe-all-target-libf2c
maybe-all-target-libf2c:
-all-target-libf2c:
+all-target-libf2c: configure-target-libf2c
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libobjc maybe-configure-target-libobjc
maybe-configure-target-libobjc:
-configure-target-libobjc:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libobjc/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libobjc/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libobjc/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libobjc/tmpmulti.out; \
- else \
- echo "Multilibs changed for libobjc, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/Makefile; \
- mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libobjc ]; then \
- [ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
+configure-target-libobjc: $(TARGET_SUBDIR)/libobjc/Makefile
+
+$(TARGET_SUBDIR)/libobjc/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libobjc"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libobjc/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libobjc/Makefile: config.status $(TARGET_SUBDIR)/libobjc/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libobjc maybe-all-target-libobjc
maybe-all-target-libobjc:
-all-target-libobjc:
+all-target-libobjc: configure-target-libobjc
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libtermcap maybe-configure-target-libtermcap
maybe-configure-target-libtermcap:
-configure-target-libtermcap:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libtermcap/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libtermcap/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libtermcap/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libtermcap/tmpmulti.out; \
- else \
- echo "Multilibs changed for libtermcap, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/Makefile; \
- mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libtermcap ]; then \
- [ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
+configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/Makefile
+
+$(TARGET_SUBDIR)/libtermcap/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libtermcap"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libtermcap/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libtermcap/Makefile: config.status $(TARGET_SUBDIR)/libtermcap/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libtermcap maybe-all-target-libtermcap
maybe-all-target-libtermcap:
-all-target-libtermcap:
+all-target-libtermcap: configure-target-libtermcap
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-winsup maybe-configure-target-winsup
maybe-configure-target-winsup:
-configure-target-winsup:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/winsup/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/winsup/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/winsup/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/winsup/tmpmulti.out; \
- else \
- echo "Multilibs changed for winsup, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/Makefile; \
- mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/winsup ]; then \
- [ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
+configure-target-winsup: $(TARGET_SUBDIR)/winsup/Makefile
+
+$(TARGET_SUBDIR)/winsup/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for winsup"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/winsup/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/winsup/Makefile: config.status $(TARGET_SUBDIR)/winsup/multilib.out
+ @[ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-winsup maybe-all-target-winsup
maybe-all-target-winsup:
-all-target-winsup:
+all-target-winsup: configure-target-winsup
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libgloss maybe-configure-target-libgloss
maybe-configure-target-libgloss:
-configure-target-libgloss:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgloss/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libgloss/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libgloss/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libgloss/tmpmulti.out; \
- else \
- echo "Multilibs changed for libgloss, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/Makefile; \
- mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libgloss ]; then \
- [ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
+configure-target-libgloss: $(TARGET_SUBDIR)/libgloss/Makefile
+
+$(TARGET_SUBDIR)/libgloss/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libgloss"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgloss/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libgloss/Makefile: config.status $(TARGET_SUBDIR)/libgloss/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libgloss maybe-all-target-libgloss
maybe-all-target-libgloss:
-all-target-libgloss:
+all-target-libgloss: configure-target-libgloss
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libiberty maybe-configure-target-libiberty
maybe-configure-target-libiberty:
-configure-target-libiberty:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libiberty/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libiberty/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libiberty/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libiberty/tmpmulti.out; \
- else \
- echo "Multilibs changed for libiberty, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/Makefile; \
- mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libiberty ]; then \
- [ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
+configure-target-libiberty: $(TARGET_SUBDIR)/libiberty/Makefile
+
+$(TARGET_SUBDIR)/libiberty/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libiberty"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libiberty/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libiberty/Makefile: config.status $(TARGET_SUBDIR)/libiberty/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libiberty maybe-all-target-libiberty
maybe-all-target-libiberty:
-all-target-libiberty:
+all-target-libiberty: configure-target-libiberty
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-gperf maybe-configure-target-gperf
maybe-configure-target-gperf:
-configure-target-gperf:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/gperf/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/gperf/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/gperf/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/gperf/tmpmulti.out; \
- else \
- echo "Multilibs changed for gperf, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/Makefile; \
- mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/gperf ]; then \
- [ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
+configure-target-gperf: $(TARGET_SUBDIR)/gperf/Makefile
+
+$(TARGET_SUBDIR)/gperf/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for gperf"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/gperf/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/gperf/Makefile: config.status $(TARGET_SUBDIR)/gperf/multilib.out
+ @[ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-gperf maybe-all-target-gperf
maybe-all-target-gperf:
-all-target-gperf:
+all-target-gperf: configure-target-gperf
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-examples maybe-configure-target-examples
maybe-configure-target-examples:
-configure-target-examples:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/examples/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/examples/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/examples/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/examples/tmpmulti.out; \
- else \
- echo "Multilibs changed for examples, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/Makefile; \
- mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/examples ]; then \
- [ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
+configure-target-examples: $(TARGET_SUBDIR)/examples/Makefile
+
+$(TARGET_SUBDIR)/examples/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for examples"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/examples/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/examples/Makefile: config.status $(TARGET_SUBDIR)/examples/multilib.out
+ @[ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-examples maybe-all-target-examples
maybe-all-target-examples:
-all-target-examples:
+all-target-examples: configure-target-examples
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libffi maybe-configure-target-libffi
maybe-configure-target-libffi:
-configure-target-libffi:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libffi/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libffi/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libffi/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libffi/tmpmulti.out; \
- else \
- echo "Multilibs changed for libffi, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/Makefile; \
- mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libffi ]; then \
- [ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
+configure-target-libffi: $(TARGET_SUBDIR)/libffi/Makefile
+
+$(TARGET_SUBDIR)/libffi/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libffi"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libffi/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libffi/Makefile: config.status $(TARGET_SUBDIR)/libffi/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libffi maybe-all-target-libffi
maybe-all-target-libffi:
-all-target-libffi:
+all-target-libffi: configure-target-libffi
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libjava maybe-configure-target-libjava
maybe-configure-target-libjava:
-configure-target-libjava:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libjava/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/libjava/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/libjava/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/libjava/tmpmulti.out; \
- else \
- echo "Multilibs changed for libjava, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/Makefile; \
- mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/libjava ]; then \
- [ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
+configure-target-libjava: $(TARGET_SUBDIR)/libjava/Makefile
+
+$(TARGET_SUBDIR)/libjava/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libjava"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libjava/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libjava/Makefile: config.status $(TARGET_SUBDIR)/libjava/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-libjava maybe-all-target-libjava
maybe-all-target-libjava:
-all-target-libjava:
+all-target-libjava: configure-target-libjava
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-zlib maybe-configure-target-zlib
maybe-configure-target-zlib:
-configure-target-zlib:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/zlib/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/zlib/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/zlib/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/zlib/tmpmulti.out; \
- else \
- echo "Multilibs changed for zlib, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/Makefile; \
- mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/zlib ]; then \
- [ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
+configure-target-zlib: $(TARGET_SUBDIR)/zlib/Makefile
+
+$(TARGET_SUBDIR)/zlib/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for zlib"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/zlib/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/zlib/Makefile: config.status $(TARGET_SUBDIR)/zlib/multilib.out
+ @[ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-zlib maybe-all-target-zlib
maybe-all-target-zlib:
-all-target-zlib:
+all-target-zlib: configure-target-zlib
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-boehm-gc maybe-configure-target-boehm-gc
maybe-configure-target-boehm-gc:
-configure-target-boehm-gc:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/boehm-gc/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out; \
- else \
- echo "Multilibs changed for boehm-gc, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/Makefile; \
- mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/boehm-gc ]; then \
- [ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
+configure-target-boehm-gc: $(TARGET_SUBDIR)/boehm-gc/Makefile
+
+$(TARGET_SUBDIR)/boehm-gc/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for boehm-gc"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/boehm-gc/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/boehm-gc/Makefile: config.status $(TARGET_SUBDIR)/boehm-gc/multilib.out
+ @[ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-boehm-gc maybe-all-target-boehm-gc
maybe-all-target-boehm-gc:
-all-target-boehm-gc:
+all-target-boehm-gc: configure-target-boehm-gc
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-qthreads maybe-configure-target-qthreads
maybe-configure-target-qthreads:
-configure-target-qthreads:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/qthreads/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/qthreads/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/qthreads/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/qthreads/tmpmulti.out; \
- else \
- echo "Multilibs changed for qthreads, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/Makefile; \
- mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/qthreads ]; then \
- [ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
+configure-target-qthreads: $(TARGET_SUBDIR)/qthreads/Makefile
+
+$(TARGET_SUBDIR)/qthreads/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for qthreads"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/qthreads/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/qthreads/Makefile: config.status $(TARGET_SUBDIR)/qthreads/multilib.out
+ @[ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-qthreads maybe-all-target-qthreads
maybe-all-target-qthreads:
-all-target-qthreads:
+all-target-qthreads: configure-target-qthreads
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-rda maybe-configure-target-rda
maybe-configure-target-rda:
-configure-target-rda:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/rda/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/rda/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/rda/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/rda/tmpmulti.out; \
- else \
- echo "Multilibs changed for rda, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/Makefile; \
- mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/rda ]; then \
- [ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
+configure-target-rda: $(TARGET_SUBDIR)/rda/Makefile
+
+$(TARGET_SUBDIR)/rda/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for rda"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/rda/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/rda/Makefile: config.status $(TARGET_SUBDIR)/rda/multilib.out
+ @[ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-rda maybe-all-target-rda
maybe-all-target-rda:
-all-target-rda:
+all-target-rda: configure-target-rda
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
+# ----------
+# GCC module
+# ----------
+
+# Unfortunately, while gcc _should_ be a host module,
+# libgcc is a target module, and gen* programs are
+# build modules. So GCC is a sort of hybrid.
+
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
true; \
fi
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}` ; export s; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
+
# --------------------------------------
# Dependencies between different modules
# --------------------------------------
ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
# Target modules specific to gcc.
-configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
-configure-target-fastjar: maybe-configure-target-zlib
+$(TARGET_SUBDIR)/boehm-gc/Makefile: $(ALL_GCC_C) maybe-configure-target-qthreads
+$(TARGET_SUBDIR)/fastjar/Makefile: maybe-configure-target-zlib
all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
-configure-target-libf2c: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libf2c/Makefile: $(ALL_GCC_C)
all-target-libf2c: maybe-all-target-libiberty
-configure-target-libffi: $(ALL_GCC_C)
-configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
+$(TARGET_SUBDIR)/libffi/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libjava/Makefile: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
-configure-target-libobjc: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libobjc/Makefile: $(ALL_GCC_C)
all-target-libobjc: maybe-all-target-libiberty
-configure-target-libstdc++-v3: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libstdc++-v3/Makefile: $(ALL_GCC_C)
all-target-libstdc++-v3: maybe-all-target-libiberty
-configure-target-zlib: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/zlib/Makefile: $(ALL_GCC_C)
# Target modules in the 'src' repository.
-configure-target-examples: $(ALL_GCC_C)
-configure-target-libgloss: $(ALL_GCC)
+$(TARGET_SUBDIR)/examples/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libgloss/Makefile: $(ALL_GCC)
all-target-libgloss: maybe-configure-target-newlib
-configure-target-libiberty: $(ALL_GCC_C)
-configure-target-libtermcap: $(ALL_GCC_C)
-configure-target-newlib: $(ALL_GCC)
-configure-target-winsup: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libiberty/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libtermcap/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/newlib/Makefile: $(ALL_GCC)
+$(TARGET_SUBDIR)/winsup/Makefile: $(ALL_GCC_C)
all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
# Other target modules. Warning, these are not well tested.
-configure-target-gperf: $(ALL_GCC_CXX)
+$(TARGET_SUBDIR)/gperf/Makefile: $(ALL_GCC_CXX)
all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
-configure-target-qthreads: $(ALL_GCC_C)
-
-# Dependencies of all-build-foo on configure-build-foo.
-all-build-libiberty: configure-build-libiberty
-
-
-# Dependencies of all-target-foo on configure-target-foo.
-all-target-libstdc++-v3: configure-target-libstdc++-v3
-all-target-newlib: configure-target-newlib
-all-target-libf2c: configure-target-libf2c
-all-target-libobjc: configure-target-libobjc
-all-target-libtermcap: configure-target-libtermcap
-all-target-winsup: configure-target-winsup
-all-target-libgloss: configure-target-libgloss
-all-target-libiberty: configure-target-libiberty
-all-target-gperf: configure-target-gperf
-all-target-examples: configure-target-examples
-all-target-libffi: configure-target-libffi
-all-target-libjava: configure-target-libjava
-all-target-zlib: configure-target-zlib
-all-target-boehm-gc: configure-target-boehm-gc
-all-target-qthreads: configure-target-qthreads
-all-target-rda: configure-target-rda
-
+$(TARGET_SUBDIR)/qthreads/Makefile: $(ALL_GCC_C)
# Dependencies of maybe-foo on foo. These are used because, for example,
# all-gcc only depends on all-gas if gas is present and being configured.
@maybe_dependencies@
-### other supporting targets
-
-MAKEDIRS= \
- $(DESTDIR)$(prefix) \
- $(DESTDIR)$(exec_prefix)
-.PHONY: installdirs
-installdirs: mkinstalldirs
- $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
-
-dir.info: do-install-info
- if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
- $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
- mv -f dir.info.new dir.info ; \
- else true ; \
- fi
-
-dist:
- @echo "Building a full distribution of this tree isn't done"
- @echo "via 'make dist'. Check out the etc/ subdirectory"
-
-etags tags: TAGS
-
-# Right now this just builds TAGS in each subdirectory. emacs19 has the
-# ability to use several tags files at once, so there is probably no need
-# to combine them into one big TAGS file (like CVS 1.3 does). We could
-# (if we felt like it) have this Makefile write a piece of elisp which
-# the user could load to tell emacs19 where all the TAGS files we just
-# built are.
-TAGS: do-TAGS
+# --------------------------------
+# Regenerating top level configury
+# --------------------------------
# Rebuilding Makefile.in, using autogen.
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
projects / deliverable / binutils-gdb.git / blobdiff