## Process this file with automake to generate Makefile.in
+#
+# Copyright (C) 2012-2020 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+#
-AUTOMAKE_OPTIONS = dejagnu no-dist foreign
+AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
SUBDIRS = doc po
YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
YFLAGS = -d
LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
+LEXLIB = @LEXLIB@
# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled. Avoid this.
am__skiplex =
am__skipyacc =
+# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
+# -I../zlib, unless we were configured with --with-system-zlib, in which
+# case both are empty.
+ZLIB = @zlibdir@ -lz
+ZLIBINC = @zlibinc@
+
WARN_CFLAGS = @WARN_CFLAGS@
+WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
NO_WERROR = @NO_WERROR@
-AM_CFLAGS = $(WARN_CFLAGS)
+AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
+AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC)
LIBICONV = @LIBICONV@
+LIBDEBUGINFOD = @LIBDEBUGINFOD@
+
# these two are almost the same program
AR_PROG=ar
RANLIB_PROG=ranlib
ADDR2LINE_PROG=addr2line
-NLMCONV_PROG=nlmconv
DLLTOOL_PROG=dlltool
WINDRES_PROG=windres
WINDMC_PROG=windmc
SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
-bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ @BUILD_INSTALL_MISC@
+bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
+
+bin_SCRIPTS = @BUILD_INSTALL_MISC@
+EXTRA_SCRIPTS = embedspu
+
+## Test programs.
+BFDTEST1_PROG = bfdtest1
+BFDTEST2_PROG = bfdtest2
+GENTESTDLLS_PROG = testsuite/gentestdlls
+
+TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG)
## We need a special rule to install the programs which are built with
## -new, and to rename cxxfilt to c++filt.
RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
-noinst_PROGRAMS = $(RENAMED_PROGS) @BUILD_MISC@
+noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
-EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
+EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
# Stuff that goes in tooldir/ if appropriate.
-TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
+TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
HFILES = \
arsup.h binemul.h bucomm.h budbg.h \
- coffgrok.h debug.h dlltool.h dwarf.h nlmconv.h \
- sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
+ coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \
+ objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
windmc.h
GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
coffdump.c coffgrok.c cxxfilt.c \
dwarf.c debug.c dlltool.c dllwrap.c \
- emul_aix.c emul_vanilla.c filemode.c \
- ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
- nlmconv.c nm.c not-ranlib.c not-strip.c \
+ elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
+ is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
+ nm.c not-ranlib.c not-strip.c \
objcopy.c objdump.c prdbg.c \
+ od-elf32_avr.c od-macho.c od-xcoff.c \
rclex.c rdcoff.c rddbg.c readelf.c rename.c \
resbin.c rescoff.c resrc.c resres.c \
size.c srconv.c stabs.c strings.c sysdump.c \
- unwind-ia64.c elfedit.c version.c \
+ syslex_wrap.c unwind-ia64.c elfedit.c version.c \
windres.c winduni.c wrstabs.c \
windmc.c mclex.c
GENERATED_CFILES = \
arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
- defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
+ defparse.c deflex.c rcparse.c mcparse.c
-DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
+DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c
WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
+# Extra object files for objdump
+OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
+
# Code shared by all the binutils.
BULIBS = bucomm.c version.c filemode.c
+# Code shared by the ELF related programs.
+ELFLIBS = elfcomm.c
+
BFDLIB = ../bfd/libbfd.la
OPCODES = ../opcodes/libopcodes.la
+LIBCTF = ../libctf/libctf.la
+LIBCTF_NOBFD = ../libctf/libctf-nobfd.la
+
LIBIBERTY = ../libiberty/libiberty.a
POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
check-DEJAGNU: site.exp
srcdir=`cd $(srcdir) && pwd`; export srcdir; \
r=`pwd`; export r; \
+ LC_ALL=C; export LC_ALL; \
EXPECT=$(EXPECT); export EXPECT; \
runtest=$(RUNTEST); \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \
CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
$$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
$(RUNTESTFLAGS); \
else echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi
+development.exp: $(BFDDIR)/development.sh
+ $(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh \
+ | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
+
installcheck-local:
/bin/sh $(srcdir)/sanity.sh $(bindir)
# which depends on libintl, since we don't know whether LIBINTL_DEP will be
# non-empty until configure time. Ugh!
size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
-objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES)
+objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES)
nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
-nlmconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
-readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
+readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD)
elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
+bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
+bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
strings_SOURCES = strings.c $(BULIBS)
-readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c
-readelf_LDADD = $(LIBINTL) $(LIBIBERTY)
+readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
+readelf_LDADD = $(LIBINTL) $(LIBCTF_NOBFD) $(LIBIBERTY) $(ZLIB) $(LIBDEBUGINFOD)
-elfedit_SOURCES = elfedit.c version.c
+elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
nm_new_SOURCES = nm.c $(BULIBS)
-objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS)
-objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
+objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
+EXTRA_objdump_SOURCES = od-xcoff.c
+objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(LIBDEBUGINFOD)
objdump.@OBJEXT@:objdump.c
if am__fastdepCC
ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
emul_$(EMULATION).c $(BULIBS)
EXTRA_ar_SOURCES = $(CFILES)
-ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
+ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
binemul.c emul_$(EMULATION).c $(BULIBS)
-ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
+ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
addr2line_SOURCES = addr2line.c $(BULIBS)
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
-sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex.@OBJEXT@
- $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex.@OBJEXT@
+sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
+ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
-syslex.@OBJEXT@: syslex.c sysinfo.h config.h
- if [ -r syslex.c ]; then \
- $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) syslex.c ; \
- else \
- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex.c ;\
- fi
+syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
+ $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
sysinfo.@OBJEXT@: sysinfo.c
if [ -r sysinfo.c ]; then \
- $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
+ $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
else \
- $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
+ $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
fi
-bin2c$(EXEEXT_FOR_BUILD): $(LIBINTL_DEP)
- $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c $(srcdir)/version.c $(LIBINTL)
+bin2c$(EXEEXT_FOR_BUILD): bin2c.c
+ $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
-embedspu: embedspu.sh
- sed "s@^program_transform_name=@program_transform_name=$(program_transform_name)@" < $< > $@
+embedspu: embedspu.sh Makefile
+ awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
chmod a+x $@
# We need these for parallel make.
$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
endif
-nlmheader.@OBJEXT@: nlmheader.c
-if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-else
-if AMDEP
- source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
- DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-endif
- $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
-endif
-
rcparse.@OBJEXT@: rcparse.c
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
srconv.@OBJEXT@: sysroff.c
dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
-dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
+dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
dlltool.@OBJEXT@:
if am__fastdepCC
sysdump_SOURCES = sysdump.c $(BULIBS)
sysdump.@OBJEXT@: sysroff.c
-# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
-# scripts, since they are only included conditionally.
-nlmconv.@OBJEXT@: nlmconv.c
-if am__fastdepCC
- ldname=`echo ld | sed '$(transform)'`; \
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
- -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-else
-if AMDEP
- source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
- DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-endif
- ldname=`echo ld | sed '$(transform)'`; \
- $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
-endif
-
-nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
-
windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
winduni.c resres.c $(BULIBS)
-windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
+windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
windmc_SOURCES = windmc.c mcparse.y mclex.c \
winduni.c $(BULIBS)
-windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
+windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
dllwrap_SOURCES = dllwrap.c version.c
dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
-EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
+EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \
syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
- mcparse.h mcparse.c
+ mcparse.h mcparse.c embedspu.sh
diststuff: $(EXTRA_DIST) info
all: info
-# We extract version from bfd/configure.in, make sure to rerun configure
-# when BFD's version changes.
-CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
+# development.sh is used to determine -Werror default.
+CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
+
+EXTRA_DEJAGNU_SITE_CONFIG = development.exp
-DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak
+DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
+ site.bak embedspu
MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
binutils.log binutils.sum abcdefgh*
install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
@list='$(RENAMED_PROGS)'; for p in $$list; do \
if test -f $$p$(EXEEXT); then \
- echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
- $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
else :; fi; \
done
$(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
- || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
+ || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
fi; \
else true; \
fi; \
projects / deliverable / binutils-gdb.git / blobdiff