## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992, 93, 94, 95, 96, 97, 1998, 1999 Free Software Foundation, Inc.
+# Copyright (C) 1992-99, 2000 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
host_libs="${host_libs} libgui"
fi
+# Set up configure/Makefile variables if libstdc++-v3 is to be built.
+if [ "${enable_libstdcxx_v3}" = "yes" ] && test -d $srcdir/libstdc++-v3; then
+ libstdcxx_version="target-libstdc++-v3"
+ # Don't use libstdc++-v3's flags to configure/build itself.
+ libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/mkcheck && $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/mkcheck 2 $$r/$(TARGET_SUBDIR)/libstdc++-v3 $$s/libstdc++-v3 | sed -e '"'s/-I/-isystem /g'"' ;; esac` -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src/.libs'
+else
+ libstdcxx_version="target-libio target-libstdc++"
+ libstdcxx_flags='-isystem $$s/libstdc++ -isystem $$s/libstdc++/std -isystem $$s/libstdc++/stl -isystem $$s/libio/ -isystem $$s/libio/stdio -L$$r/$(TARGET_SUBDIR)/libstdc++'
+fi
+
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
target_libs="target-libiberty \
target-libgloss \
target-newlib \
- target-libio \
- target-librx \
- target-libstdc++ \
- target-libg++"
+ ${libstdcxx_version} \
+ target-libf2c \
+ target-libchill \
+ target-libffi \
+ target-libjava \
+ target-zlib \
+ target-boehm-gc \
+ target-qthreads \
+ target-libobjc"
# these tools are built using the target libs, and are intended to run only
# in the target environment
mips*-*-sysv*)
host_makefile_frag="${host_makefile_frag} config/mh-riscos"
;;
+ i370-ibm-opened*)
+ host_makefile_frag="${host_makefile_frag} config/mh-openedition"
+ ;;
i[3456]86-*-sysv5*)
host_makefile_frag="${host_makefile_frag} config/mh-sysv5"
;;
*-*-lynxos*)
host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
;;
- *-*-aix4.[3456789]* | *-*-aix[56789].*)
- host_makefile_frag="${host_makefile_frag} config/mh-aix43"
- ;;
*-*-sysv4*)
host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
;;
i[3456]86-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
;;
+ i370-*-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-i370pic"
+ ;;
+ ia64-*-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ia64pic"
+ ;;
sparc64-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-sparcpic"
;;
powerpc-*-netware*)
target_makefile_frag="${target_makefile_frag} config/mt-netware"
;;
- *-*-linux-gnu)
+ *-*-linux-gnu*)
target_makefile_frag="${target_makefile_frag} config/mt-linux"
;;
+ *-*-aix4.[3456789]* | *-*-aix[56789].*)
+ target_makefile_frag="${target_makefile_frag} config/mt-aix43"
+ ;;
+ mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+ target_makefile_frag="${target_makefile_frag} config/mt-wince"
+ ;;
esac
# If --enable-target-optspace always use -Os instead of -O2 to build
yes:*)
target_makefile_frag="${target_makefile_frag} config/mt-ospace"
;;
- # CYGNUS LOCAL d10v, d30v, fr30
:d30v-*)
target_makefile_frag="${target_makefile_frag} config/mt-d30v"
;;
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext libffi"
;;
i[3456]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
- noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet libtool"
+ noconfigdirs="expect dejagnu cvs autoconf automake send-pr rcs guile perl texinfo apache inet libtool"
;;
i[3456]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
- noconfigdirs="autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr rcs guile perl texinfo apache inet"
;;
*-*-netbsd*)
noconfigdirs="rcs"
ppc*-*-pe)
noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv"
;;
+ powerpc-*-beos*)
+ noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
+ ;;
esac
case "${target}" in
*-*-netware)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
;;
*-*-rtems*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
noconfigdirs="$noconfigdirs gas ld emacs fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
- ;;
- alpha*-*-linux*)
- # newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss target-libffi"
;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ noconfigdirs="$noconfigdirs target-libjava target-libffi target-zlib"
+ noconfigdirs="$noconfigdirs target-boehm-gc target-qthreads target-examples"
+ noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
+ noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+ noconfigdirs="$noconfigdirs expect dejagnu"
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs ${libstdcxx_version}"
+ skipdirs="$skipdirs target-newlib"
+ case "${host}" in
+ *-*-cygwin*) ;; # keep gdb and readline
+ *) noconfigdirs="$noconfigdirs gdb readline ${libstdcxx_version}"
+ ;;
+ esac
+ ;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
fi
;;
arm-*-oabi*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
c4x-*-*)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ ;;
+ c54x*-*-* | tic54x-*-*)
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib"
;;
thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
-# CYGNUS LOCAL clm/arm-elf
thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
thumb-*-oabi)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
-# END CYGNUS LOCAL
-# CYGNUS LOCAL nickc/strongarm
strongarm-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
strongarm-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
-# END CYGNUS LOCAL
- thumb-*-pe) # CYGNUS LOCAL nickc/thumb
- noconfigdirs="$noconfigdirs target-libgloss"
+ thumb-*-pe)
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss"
+ noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
-# CYGNUS LOCAL d30v
d30v-*-*)
;;
-# END CYGNUS LOCAL
-# CYGNUS LOCAL fr30
fr30-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
-# END CYGNUS LOCAL
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
hppa*-*-*elf* | \
hppa*-*-linux-gnu* | \
- hppa*-*-lites*)
- # Do configure ld/binutils/gas for the above cases.
+ hppa*-*-lites* | \
+ hppa*64*-*-*)
+ # Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
# HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
+ ia64*-*-elf*)
+ # No gdb support yet.
+ noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+ ;;
i[3456]86-*-coff | i[3456]86-*-elf)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
;;
i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*)
# but don't build gdb
- noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
- ;;
- *-*-linux*)
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
+ noconfigdirs="$noconfigdirs gdb ${libstdcxx_version} target-libffi"
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss"
+ noconfigdirs="$noconfigdirs expect target-libgloss target-libffi"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss target-libffi"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
esac
;;
i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs ld target-libgloss"
+ noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
;;
i[3456]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
;;
i[3456]86-*-solaris2*)
noconfigdirs="$noconfigdirs target-libgloss"
*) ;;
esac
# but that's okay since emacs doesn't work anyway
- noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
+ noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss target-libffi"
;;
i[3456]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
fi
;;
mn10200-*-*)
- noconfigdirs="$noconfigdirs"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
mn10300-*-*)
- noconfigdirs="$noconfigdirs"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss"
- # This is needed until gcc and ld are fixed to work together.
+ # The configure and build of ld are currently disabled because
+ # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
+ # The symptom is that GDBtk 4.18 fails at startup with a segfault
+ # if linked by GNU ld, but not if linked by the native ld.
+ noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss target-libffi ld"
use_gnu_ld=no
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv target-libffi"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv target-libffi"
+ ;;
+ powerpc-*-beos*)
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
powerpc-*-eabi)
if [ x${is_cross_compiler} != xno ] ; then
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
- # Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs target-newlib gprof cvssrc"
+ noconfigdirs="$noconfigdirs target-newlib gprof cvssrc target-libffi"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof"
- # This is needed until gcc and ld are fixed to work together.
+ # The configure and build of ld are currently disabled because
+ # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
+ # The symptom is that GDBtk 4.18 fails at startup with a segfault
+ # if linked by GNU ld, but not if linked by the native ld.
+ noconfigdirs="$noconfigdirs gprof target-libffi ld"
use_gnu_ld=no
;;
rs6000-*-*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs gprof target-libffi"
;;
m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss target-libffi"
;;
mips*-*-irix5*)
# The GNU linker does not support shared libraries.
noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
;;
mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
;;
mipstx39-*-*)
- noconfigdirs="$noconfigdirs gprof" # same as generic mips
+ noconfigdirs="$noconfigdirs gprof target-libffi" # same as generic mips
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
;;
mips*-*-*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs gprof target-libffi"
;;
romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss"
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss target-libffi"
;;
sh-*-*)
case "${host}" in
i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
sparc-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
+ noconfigdirs="target-libffi"
;;
sparclite-*-*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
+ noconfigdirs="target-libffi"
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
fi
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi"
;;
v850-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
- v850e-*-*) # CYGNUS LOCAL v850e
- noconfigdirs="$noconfigdirs target-libgloss"
+ v850e-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
v850ea-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;; # END CYGNUS LOCAL
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ ;;
vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss target-libffi"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
;;
*-*-lynxos*)
- # Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
;;
*-*-macos* | \
*-*-mpw*)
# Macs want a resource compiler.
configdirs="$configdirs grez"
+ noconfigdirs="target-libffi"
;;
esac
i[3456]86-*)
target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
;;
+ ia64-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ia64pic"
+ ;;
+ powerpc*-*-aix*)
+ # We don't want -fPIC on AIX.
+ ;;
powerpc*-*)
target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
;;
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
-# the gcc, libio, libstdc++ and libg++ subdirectories.
+# the gcc, libio, and libstdc++ subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
gxx_include_dir=
if test -n "${with_gxx_include_dir}"; then
gxx_include_dir=${gxx_include_dir}
fi
-targargs="--host=${target_alias} --build=${build_alias} ${targargs}"
+FLAGS_FOR_TARGET=
+if test -d ${topsrcdir}/gcc; then
+ # Directories specified with -B are searched for libraries after those
+ # specified with -L, but for headers (in sub-directory `include')
+ # before those specified with -I and -isystem. Fortunately, we don't
+ # expect include directories to exist in build_tooldir/{bin,lib} (see
+ # below), and we want gcc/include to be searched first.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/gcc/'
+fi
+
+case " $skipdirs " in
+*" target-newlib "*) ;;
+*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+ esac
+
+ # If we're using a pre-built compiler (which is the case for
+ # Canadian crosses or when gcc isn't being built), don't discard
+ # standard headers.
+ if test "${build}" = "${host}" && test ! -d ${topsrcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+ fi
+
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+esac
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${topsrcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
+fi
+
+if test "x${use_gnu_ld}" = x && test "x${with_gnu_ld}" != xno &&
+ echo " ${configdirs} " | grep " ld " > /dev/null &&
+ test -d ${srcdir}/ld; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+fi
+
+if test "x${CC_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CC_FOR_TARGET='$$r/gcc/xgcc'
+elif test "$host" = "$target"; then
+ CC_FOR_TARGET='$(CC)'
+else
+ CC_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+fi
+# On Canadian crosses, configure reads CC_FOR_TARGET from Makefile,
+# if Makefile exists. Prevent $(FLAGS_FOR_TARGET) from being duplicated.
+case $CC_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
+if test "x${CHILL_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc &&
+ echo ",${enable_languages-`echo ${LANGUAGES-CHILL} | tr ' ' ','`}," |
+ grep ',CHILL,' > /dev/null ; then
+ CHILL_FOR_TARGET='$$r/gcc/xgcc -L$$r/gcc/ch/runtime/'
+elif test "$host" = "$target"; then
+ CHILL_FOR_TARGET='$(CC)'
+else
+ CHILL_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+fi
+case $CHILL_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
+if test "x${CXX_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc &&
+ echo ",${enable_languages-`echo ${LANGUAGES-c++} | tr ' ' ','`}," |
+ grep ',c[+][+],' > /dev/null ; then
+ CXX_FOR_TARGET='$$r/gcc/g++ -nostdinc++ '$libstdcxx_flags
+elif test "$host" = "$target"; then
+ CXX_FOR_TARGET='$(CXX)'
+else
+ CXX_FOR_TARGET=`echo c++ | sed -e 's/x/x/' ${program_transform_name}`
+fi
+case $CXX_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,&,\\\&,g'`
+
+targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
+ -e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
+ -e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
+ -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
-e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
Makefile > Makefile.tem
projects / deliverable / binutils-gdb.git / blobdiff