-2007-11-07 Eric B. Weddington <eweddington@cso.atmel.com>
+2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
- * config/tc-avr.c (mcu_types): Add ATtiny88 device.
- * doc/c-avr.texi: Likewise.
-
-2007-11-07 Anatoly Sokolov <aesok@post.ru>
-
- * config/tc-avr.c (mcu_types): Add new devices: ATmega48P, ATmega88P,
- ATmega168P, Atmega328P
- * doc/c-avr.texi: Document new devices.
-
-2007-11-07 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-ppc.c (md_apply_fix): For PPC_TOC16 on XCOFF, uses offset
- within the TOC instead of the VMA.
-
-2007-11-06 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_mull): Allow overlapping Rm for armv6.
-
-2007-11-06 Nick Clifton <nickc@redhat.com>
-
- * ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke
- it to see if the optimizations should be applied.
- * config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call
- frame optimization if linker relaxation is not enabled.
-
-2007-11-05 Danny Smith <dannysmith@users.sourceforge.net>
-
- * read.c (ALIGN_LIMIT): Rename to ...
- (TC_ALIGN_LIMIT): Guard against prior definition.
- * config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define.
-
-2007-11-01 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (xtensa_symbol_new_hook): New.
- (xtensa_mark_difference_of_two_symbols): New.
- (xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols.
- * config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol.
- (tc_symbol_new_hook): Define.
-
-2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Replace no_xsuf with
- no_ldsuf.
- (match_template): Likewise.
-
-2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii
- letter.
-
-2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_suffix): Check addrprefixop0 to
- see if the address size override prefix changes the size of the
- first operand.
- (check_byte_reg): Don't warn if byteokintel is set.
- (check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword
- is set.
- (check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword
- is set.
-
-2007-10-31 Eric B. Weddington <eweddington@cso.atmel.com>
-
- * config/tc-avr.c (mcu_types): Remove devices that were never produced:
- attiny10, atmega83, atmega85, atmega603.
- * doc/c-avr.texi: Likewise.
-
-2007-10-30 Nick Clifton <nickc@redhat.com>
-
- * config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
- sym_diff relocs should be generated.
- (md_apply_fix): Skip R_MN10300_ALIGN relocs.
- (mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
- (mn10300_handle_align): New function. Generate R_MN10300_ALIGN
- relocs to record alignment requests.
- * config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
- R_MN10300_ALIGN relocs.
- (HANDLE_ALIGN): Define. Call mn10300_handle_align.
-
-2007-10-30 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo (Section): Replace "subsegment" with
- "subsection".
-
-2007-10-27 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5221
- * config/obj-elf.c (obj_elf_section): Handle optional
- parameters for .pushsection.
-
- * doc/as.texinfo: Document optional parameters for
- .pushsection.
-
-2007-10-24 H.J. Lu <hongjiu.lu@intel.com>
-
- * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE.
- * configure: Regenerated.
+ * aclocal.m4: Regenerate.
+ * configure: Likewise.
+ * Makefile.in: Likewise.
+ * doc/Makefile.in: Likewise.
-2007-10-24 Alan Modra <amodra@bigpond.net.au>
+2008-03-17 Adrian Bunk <bunk@stusta.de>
- * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.
- Run "make dep-am".
- * configure.in: Invoke AC_GNU_SOURCE.
- * Makefile.in: Regenerate.
- * config.in: Regenerate.
- * configure: Regenerate.
+ PR 5946
+ * config/tc-hppa.c (is_same_frag): Delete.
-2007-10-19 Nick Clifton <nickc@redhat.com>
-
- * expr.c (expr): Test md_allow_local_subtract (if defined) before
- allowing the evaluation of an expression involving two symbols
- defined in the same section.
- * doc/internals.texi (md_allow_local_subtract): Document the new
- macro.
- * config/tc-mn10300.h (md_allow_local_subtract): Define.
- (RELAX_EXPANSION_POSSIBLE): Define.
- (MAX_RELOC_EXPANSION): Define.
- (TC_FRAG_TYPE): Define.
- * config/tc-mn10300.c (md_assemble): Mark fragments as containing code.
- (tc_gen_reloc): Return an array of relocs. If necessary generate
- two relocs to handle an expressions involving the difference of
- two symbols.
- (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL
- when then fixup is not pc-relative.
- (mn10300_allow_local_subtract): New function. Determine when it
- is safe to compute the difference between two symbols at assemble
- time.
-
-2007-10-19 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
- (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
- chars that can start a name.
-
-2007-10-18 Carlos O'Donell <carlos@systemhalted.org>
-
- * config/tc-hppa.c (pa_ip): Fix comment typo.
- (pa_comm): Likewise.
-
-2007-10-18 Nick Clifton <nickc@redhat.com>
-
- PR gas/5172
- * config/tc-arc.c (md_estimate_size_before_relax): Change error
- message.
- (md_convert_frag): Just call abort.
- * config/tc-i860.c (md_estimate_size_before_relax): Change error
- message.
- * config/tc-i860.h (md_convert_frag): Just call abort.
- * config/tc-ip2k.c (md_estimate_size_before_relax): Change error
- message.
- (md_convert_frag): Just call abort.
- * config/tc-m68k.c (m68k_ip): Do not attempt translation of
- architecture names.
- PR gas/5174
- * config/tc-arm.c: Fix formatting and spelling errors.
- PR gas/5175
- * config/tc-xc16x.c: Fix formatting and internationalization.
- * po/gas.pot: Regenerate.
-
-2007-10-17 Nick Clifton <nickc@redhat.com>
-
- PR gas/5173
- * as.h (ieee_md_atof, vax_md_atof): New prototypes.
- * read.c (s_float_space): Allow a zero length return from md_atof
- if the error message has been set.
- (float_cons): Likewise.
- * config/atof-ieee.c (ieee_md_atof): New function. Performs the
- md_atof() function in a generic way for IEEE using targets.
- * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the
- same error message as ieee_md_atof.
- * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof.
- * tc-arc.c (md_atof): Use ieee_md_atof.
- * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the
- constant 2. Use a precision of 5 for the 'x' and 'p' types.
- * tc-avr.c (md_atof): Use ieee_md_atof.
- * tc-bfin.c (md_atof): Use ieee_md_atof.
- * tc-cr16.c (md_atof): Use ieee_md_atof.
- * tc-crx.c (md_atof): Use ieee_md_atof.
- * tc-d10v.c (md_atof): Use ieee_md_atof.
- * tc-d30v.c (md_atof): Use ieee_md_atof.
- * tc-dlx.c (md_atof): Use ieee_md_atof.
- * tc-fr30.c (md_atof): Use ieee_md_atof.
- * tc-frv.c (md_atof): Use ieee_md_atof.
- * tc-h8300.c (md_atof): Use ieee_md_atof.
- * tc-hppa.c (md_atof): Use ieee_md_atof.
- * tc-i370.c (md_atof): Use ieee_md_atof.
- (i370_dc): Convert the 'E' type to 'f' before calling md_atof.
- * tc-i386.c (md_atof): Use ieee_md_atof.
- * tc-i860.c (md_atof): Use ieee_md_atof.
- * tc-i960.c (md_atof): Use ieee_md_atof.
- * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof.
- * tc-ip2k.c (md_atof): Use ieee_md_atof.
- * tc-iq2000.c (md_atof): Use ieee_md_atof.
- * tc-m32c.c (md_atof): Use ieee_md_atof.
- * tc-m32r.c (md_atof): Use ieee_md_atof.
- * tc-m68hc11.c (md_atof): Use ieee_md_atof.
- * tc-m68k.c (md_atof): Use ieee_md_atof.
- * tc-maxq.c (md_atof): Use ieee_md_atof.
- * tc-mcore.c (md_atof): Use ieee_md_atof.
- * tc-mep.c (md_atof): Use ieee_md_atof.
- * tc-mips.c (md_atof): Use ieee_md_atof.
- * tc-mmix.c (md_atof): Use ieee_md_atof.
- * tc-mn10200.c (md_atof): Use ieee_md_atof.
- * tc-mn10300.c (md_atof): Use ieee_md_atof.
- * tc-msp430.c (md_atof): Use ieee_md_atof.
- * tc-mt.c (md_atof): Use ieee_md_atof.
- * tc-ns32k.c (md_atof): Use ieee_md_atof.
- * tc-openrisc.c (md_atof): Use ieee_md_atof.
- * tc-or32.c (md_atof): Use ieee_md_atof.
- * tc-pdp11.c (md_atof): New function. Call vax_md_atof.
- * tc-pj.c (md_atof): Use ieee_md_atof.
- * tc-ppc.c (md_atof): Use ieee_md_atof.
- * tc-s390.c (md_atof): Use ieee_md_atof.
- * tc-score.c (md_atof): Use ieee_md_atof.
- * tc-sh.c (md_atof): Use ieee_md_atof.
- * tc-sparc.c (md_atof): Use ieee_md_atof.
- * tc-spu.c (md_atof): Use ieee_md_atof.
- * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof.
- * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof.
- * tc-tic54.c (md_atof): Use ieee_md_atof.
- * tc-v850.c (md_atof): Use ieee_md_atof.
- * tc-vax.c (md_atof): New function. Call vax_md_atof.
- * tc-xc16x.c (md_atof): Use ieee_md_atof.
- * tc-xstormy16.c (md_atof): Use ieee_md_atof.
- * tc-xtensa.c (md_atof): Use ieee_md_atof.
- * tc-z8k.c (md_atof): Use ieee_md_atof.
- * doc/internals.texi: Update description of md_atof function.
- * po/gas.pot: Regenerate.
-
-2007-10-16 Bob Wilson <bob.wilson@acm.org>
+2008-03-14 Sterling Augustine <sterling@tensilica.com>
- * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
+ * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
+ RELAX_LOOP_END_ADD_NOP.
-2007-10-16 Nick Clifton <nickc@redhat.com>
-
- * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
- symbol type.
- * doc/as.texinfo (.type): Document the types accepted by the
- type pseudo op, including "common".
-
-2007-10-15 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
- according to major opcode number.
-
-2007-10-15 Alan Modra <amodra@bigpond.net.au>
-
- * read.c (do_s_func): Check asprintf return status.
- * stabs.c (stabs_generate_asm_func): Likewise.
- (stabs_generate_asm_endfunc): Likewise.
-
-2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_operands): Simplify implicit xmm0
- handling.
-
-2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_operands): Check the firstxmm0
- field in opcode_modifier for instruction with a implicit
- xmm0 as the first operand.
-
-2007-10-12 Eric B. Weddington <eweddington@cso.atmel.com>
-
- * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
- AT90PWM3B.
- * doc/c-avr.texi: Document new devices.
-
-2007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
-
- * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
- instruction range information.
-
-2007-10-12 Daniel Jacobowitz <dan@codesourcery.com>
-
- * doc/as.texinfo (Object Attributes): New chapter.
- (Pseudo Ops): Document .gnu_attribute.
- (LNS directives): Correct .loc_mark_labels documentation.
-
-2007-10-11 Nick Clifton <nickc@redhat.com>
-
- * config/obj-elf.c (obj_elf_section): When pushing a section, if
- there is a comma then the following argument must be a subsection
- number.
-
-2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
+2008-03-13 Evandro Menezes <evandro@yahoo.com>
- * doc/c-i386.texi: Update which instruction's operands are
- swapped.
+ PR gas/5895
+ * read.c (s_mexit): Warn if attempting to exit a macro when not
+ inside a macro definition.
-2007-10-11 Nick Clifton <nickc@redhat.com>
+2008-03-13 Alan Modra <amodra@bigpond.net.au>
- PR gas/5161
- * config/tc-ia64.c: Allow for translations of error and warning
- messages.
- * po/gas.pot: Regenerate.
-
- PR gas/5158
- * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
- message.
- * po/gas.pot: Regenerate.
-
- PR gas/5155
- * config/tc-msp430.c: Fix spelling typos.
-
-2007-10-11 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
-
-2007-10-08 Maciej W. Rozycki <macro@linux-mips.org>
-
- * config/tc-mips.c (AT): Rename to...
- (ATREG): ... this.
- (AT): New definition.
- (mips_set_options): Rename "noat" to "at"; change the type.
- (mips_opts): Update accordingly.
- (append_insn): Likewise.
- (macro_build_ldst_constoffset): Likewise.
- (load_address): Likewise.
- (macro, macro2): Likewise.
- (s_mipsset): Handle ".set at=REG". Update handling of ".set at"
- and ".set noat".
-
-2007-10-08 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo (Previous): Clarify explanation of the behaviour
- of this pseudo-op and add a couple of examples.
-
-2007-10-08 Nick Clifton <nickc@redhat.com>
-
- PR gas/5121 gas/5122 gas/5123
- * Makefile.am (CFILES): Add cgen.c
- (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
- tc-tic4x.c and xtensa-relax.c.
- (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
- tc-tic4x.h and xtensa-relax.h.
- (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
- te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h,
- te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
- (CONFIG_ATOF_CFILES): New variable.
- (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with
- dependency upon TARG_ENV_HFILES.
- (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
- cgen-desc.h when foo-desc.h does not exit.
- Run make dep-am.
+ * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
- * doc/Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
- PR gas/5124 gas/5125
- * po/es.po: Regenerate.
- * po/fr.po: Regenerate.
- * po/gas.pot: Regenerate.
- * po/rw.po: Regenerate.
- * po/tr.po: Regenerate.
- * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
- of error messages.
- PR gas/5126
- * config/obj-som.c: Likewise.
- PR gas/5129
- * config/tc-arc.c: Likewise.
- PR gas/5131 gas/5132
- * config/tc-arm.c: Likewise.
- PR gas/5137
- * config/tc-bfin.c: Likewise.
- PR gas/5143
- * config/tc-frv.c: Likewise.
- PR gas/5142
- * config/tc-dlx.c: Likewise.
-
-2007-10-08 Eric B. Weddington <eweddington@cso.atmel.com>
-
- * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
- ATtiny48, AT90PWM216, AT90PWM316.
- * doc/c-avr.texi: Document new devices.
-
-2007-10-08 Nick Clifton <nickc@redhat.com>
-
- PR gas/5133
- * config/tc-arm.c (md_apply_fix): Correct error message.
- PR gas/5134
- * config/tc-arm.c (md_apply_fix): Likewise.
- PR gas/5136
- * config/tc-bfin.c (md_apply_fix): Fix error message.
- PR gas/5135
- (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
-
-2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
- immediate operands directly for instructions with 4 operands.
-
-2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5109
- * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
- is ignored in Intel mode.
-
-2007-10-04 Helge Deller <deller@gmx.de>
-
- * read.c (potable): Add string8, string16, string32 and string64.
- Add bit size for stringer function.
- (stringer_append_char): New.
- (stringer): Use stringer_append_char().
- * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
- * config/obj-elf.c (obj_elf_ident): Likewise.
- * config/tc-alpha.c (s_alpha_stringer): Likewise.
- * config/tc-dlx.c (dlx_pseudo_table): Likewise.
- * config/tc-hppa.c (pa_stringer): Likewise.
- * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
- * config/tc-m68hc11.c (md_pseudo_table): Likewise.
- * config/tc-mcore.c (md_pseudo_table): Likewise.
- * config/tc-mips.c (mips_pseudo_table): Likewise.
- * config/tc-spu.c (md_pseudo_table): Likewise.
- * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
- * doc/as.texinfo (ABORT): Fix identing.
- (String): Document new string8, string16, string32, string64
- functions.
- * NEWS: Mention the new feature.
-
-2007-10-03 Nick Clifton <nickc@redhat.com>
-
- PR gas/5078
- * config/tc-avr.c (avr_get_constant): Extend error message to
- mention that the constant must be positive.
-
-2007-10-03 Nick Clifton <nickc@redhat.com>
-
- * config/tc-avr.c (avr_get_constant):
- PR gas/5089
- * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
- PR gas/5090
- (md_assemble): Fix spelling typo.
-
-2007-10-03 Alan Modra <amodra@bigpond.net.au>
-
- PR 4303
- * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
-
-2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
-
- * config/tc-cr16.c: Replaced 'tabs' with white spaces and
- added R_CR16_DISP8 as default reloc type for b<cc> instructions.
-
-2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5080
- * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
- (check_qword_reg): Also handle cvttsd2si.
-
-2007-09-27 Kazu Hirata <kazu@codesourcery.com>
-
- * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
- (last_movec_reg): Change to MBO.
- * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
- (m68k_ip): Use MBO instead of MBO.
- (init_table): Use MBO instead of MBO. Add an entry for mbo.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (build_modrm_byte): Also check for RegEip
- when considering IP-relative addressing.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.h (md_register_arithmetic): Define.
- * config/tc-ia64.h (md_register_arithmetic): Likewise.
- * doc/internals.texi: Document md_register_arithmetic.
- * expr.c (make_expr_symbol): Force O_register expressions into
- reg_section.
- (expr): Provide default for md_register_arithmetic. Don't resolve
- adding/subtracting constants to/from registers if
- md_register_arithmetic is zero.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
- (cfi_finish): Add second empty instance.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
+ * configure: Regenerate.
- * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
- with simple call to parse_operand.
+2008-03-09 Paul Brook <paul@codesourcery.com>
-2007-09-26 Jan Beulich <jbeulich@novell.com>
+ * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
+ * doc/c-arm.texi: Add cortex-a9.
- * config/tc-i386.c (NUM_FLAG_CODE): Remove.
+2008-03-09 Paul Brook <paul@codesourcery.com>
-2007-09-26 Jan Beulich <jbeulich@novell.com>
+ * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
+ (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
+ (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
+ (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
+ * doc/c-arm.texi: Document new ARM FPU variants.
- * as.c (itbl_parse): Remove #define.
- (struct itbl_file_list): Move down and ...
- (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
- (show_usage): Conditionalize printing of --itbl option upon
- HAVE_ITBL_CPU.
- (parse_args): Conditionalize handling of -t/--itbl options upon
- HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
- 't'.
+2008-03-07 Paul Brook <paul@codesourcery.com>
-2007-09-25 H.J. Lu <hongjiu.lu@intel.com>
+ * config/tc-arm.c (md_apply_fix): Use correct offset range.
- * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
- check opcode length.
+2008-03-07 Alan Modra <amodra@bigpond.net.au>
-2007-09-25 Nathan Sidwell <nathan@codesourcery.com>
+ * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
+ for strict ordering of powerpc_opcodes, but disable for now.
- * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
- (BRANCHBWPL, FRAG_VAR_SIZE): New.
- (md_relax_table): Add BRANCHBWPL entries.
- (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
- (md_assemble): Use FRAG_VAR_SIZE.
- (md_convert_frag_1): Add BRANCHBWPL cases.
- (md_estimate_size_before_relaz): Likewise.
+2008-03-04 Paul Brook <paul@codesourcery.com>
-2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
+ * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
+ (arm_ext_v7m): Rename...
+ (arm_ext_m): ... to this. Include v6-M.
+ (do_t_add_sub): Allow narrow low-reg non flag setting adds.
+ (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
+ (md_assemble): Allow wide msr instructions.
+ (insns): Add classifications for v6-m instructions.
+ (arm_cpu_option_table): Add cortex-m1.
+ (arm_arch_option_table): Add armv6-m.
+ (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
- * config/tc-mips.c (s_align): Set max_alignment to 28.
+2008-03-03 Sterling Augustine <sterling@tensilica.com>
+ Bob Wilson <bob.wilson@acm.org>
-2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
-
- PR 658
- * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
- (set_allow_index_reg): New.
- (allow_index_reg): Likewise.
- (md_pseudo_table): Add "allow_index_reg" and
- "disallow_index_reg".
- (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
- fake index registers.
- (i386_scale): Updated.
- (i386_index_check): Support fake index registers.
- (parse_real_register): Return NULL on eiz/riz if fake index
- registers aren't allowed.
-
-2007-09-19 Nick Clifton <nickc@redhat.com>
-
- * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
- fixups.
-
-2007-09-19 Bob Wilson <bob.wilson@acm.org>
-
- * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
-
-2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
-
- * config/bfin-parse.y (asm_1): Slightly improve error messages
- for "reg += const;".
-
-2007-09-18 Alan Modra <amodra@bigpond.net.au>
-
- PR gas/5026
- * read.c (emit_expr): Only use long long if required and available.
+ * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
+ (md_begin): Initialize it.
+ (resources_conflict): Use it.
+
+2008-03-03 Sterling Augustine <sterling@tensilica.com>
+
+ * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
+
+2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
+ H.J. Lu <hongjiu.lu@intel.com>
-2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
+ PR gas/5543
+ * read.c (pseudo_set): Don't allow global register symbol.
- * config/tc-i386.c (baseindex): Removed.
- (build_modrm_byte): Check reg_num for RIP register instead of
- reg_type.
- (i386_index_check): Likewise.
+ * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
+ global.
-2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
+2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
- PR gas/5035
- * config/obj-coff.c (obj_coff_endef): Remove checking size of
- def_symbol_in_progress.
+ PR gas/5543
+ * write.c (write_object_file): Don't allow symbols which were
+ equated to register. Stop if there is an error.
-2007-09-17 Evandro Menezes <evandro@yahoo.com>
+2008-03-01 Alan Modra <amodra@bigpond.net.au>
- PR gas/5026
- * read.c (emit_expr): Use unsigned long long values in warning
- message about truncated expressions.
+ * config/tc-ppc.h (struct _ppc_fix_extra): New.
+ (ppc_cpu): Declare.
+ (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
+ * config/tc-ppc.c (ppu_cpu): Make global.
+ (ppc_insert_operand): Add ppu_cpu parameter.
+ (md_assemble): Adjust for above change.
+ (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
-2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-22 Nick Clifton <nickc@redhat.com>
- * config/tc-i386.c (intel_e04): Revert the last change.
+ * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
+ targeted ARM ports, otherwise just skip generating the reloc.
-2007-09-17 Nick Clifton <nickc@redhat.com>
+2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
- * po/es.po: Updated Spanish translation.
+ * doc/c-i386.texi: Update -march= and .arch.
-2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-18 Nick Clifton <nickc@redhat.com>
- PR gas/5034
- * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
- T_NIL.
+ * config/tc-mn10300.c (has_known_symbol_location): New function.
+ Do not regard weak symbols as having a known location.
+ (md_estimate_size_before_relax): Use new function.
+ (md_pcrel_from): Do not compute a pcrel against a weak symbol.
-2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-18 Jan Beulich <jbeulich@novell.com>
- * config/tc-i386.c (build_modrm_byte): Adjust comment line
- wrap.
+ * config/tc-i386.c (match_template): Disallow 'l' suffix when
+ currently selected CPU has no 32-bit support.
+ (parse_real_register): Do not return registers not available on
+ currently selected CPU.
-2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
- of (A || B) != 0.
+ * config/tc-i386.c (process_immext): Fix format.
-2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-i386.c (build_modrm_byte): Adjust indentation.
+ * config/tc-i386.c (inoutportreg): New.
+ (process_immext): New.
+ (md_assemble): Use it.
+ (update_imm): Use imm16 and imm32s.
+ (i386_att_operand): Use inoutportreg.
-2007-09-14 Michael Meissner <michael.meissner@amd.com>
- Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
- Tony Linthicum <tony.linthicum@amd.com>
+2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
- * NEWS: Add SSE5 support to NEWS file.
-
- * config/tc-i386.h (drex_byte): Add fields to allow process_drex
- and build_modrm_byte to communicate.
- (DREX_OC0): New SSE5 macro.
- (DREX_OC0_MASK): Ditto.
- (DREX_OC1): Ditto.
- (DREX_OC1_MASK): Ditto.
- (DREX_XMEM_X1_X2_X2): Ditto.
- (DREX_X1_XMEM_X2_X2): Ditto.
- (DREX_X1_XMEM_X2_X1: Ditto.
- (DREX_X1_X2_XMEM_X1: Ditto.
- (DREX_XMEM_X1_X2): Ditto.
- (DREX_X1_XMEM_X2): Ditto.
- (drex_byte): New structure to describe the DREX byte.
-
- * config/tc-i386.c (process_drex): New function to handle SSE5
- DREX bits.
- (build_modrm_byte): Use the information cached away in
- process_drex in the case of DREX instructions.
- (i386_insn): Add drex field.
- (pi): Add debugging of drex field.
- (md_assemble): Treat SSE5 like SSE3 in instructions with an
- immediate byte. Move REX field to DREX if this is a DREX
- instruction.
- (process_operands): Add SSE5 support.
- (build_modrm_byte): Ditto.
- (output_insn): Ditto.
- (cpu_arch): Ditto.
- (i386_align_code): Ditto.
-
-2007-09-12 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
- after generic operand swapping, and swap only the immediate operands.
-
-2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
- (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
-
-2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
- byte opcode.
-
-2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
- (cpu_flags_check_cpu64): This. Inline.
- (uints_all_zero): New.
- (uints_set): Likewise
- (uints_equal): Likewise
- (UINTS_ALL_ZERO): Likewise
- (UINTS_SET): Likewise
- (UINTS_CLEAR): Likewise
- (UINTS_EQUAL): Likewise
- (cpu_flags_and): Likewise.
- (cpu_flags_or): Likewise.
- (operand_type_and): Likewise.
- (operand_type_or): Likewise.
- (operand_type_xor): Likewise.
- (cpu_flags_not): Inline and use switch instead of loop.
+ * config/tc-i386.c (operand_type_all_zero): New.
+ (operand_type_set): Likewise.
+ (operand_type_equal): Likewise.
+ (cpu_flags_all_zero): Likewise.
+ (cpu_flags_set): Likewise.
+ (cpu_flags_equal): Likewise.
+ (UINTS_ALL_ZERO): Removed.
+ (UINTS_SET): Likewise.
+ (UINTS_CLEAR): Likewise.
+ (UINTS_EQUAL): Likewise.
(cpu_flags_match): Updated.
- (operand_type_match): Likewise.
(smallest_imm_type): Likewise.
(set_cpu_arch): Likewise.
- (pt): Likewise.
(md_assemble): Likewise.
- (parse_insn): Likewise.
(optimize_imm): Likewise.
(match_template): Likewise.
(process_suffix): Likewise.
(update_imm): Likewise.
- (finalize_imm): Likewise.
+ (process_drex): Likewise.
(process_operands): Likewise.
(build_modrm_byte): Likewise.
(i386_immediate): Likewise.
(i386_displacement): Likewise.
- (i386_index_check): Likewise.
- (i386_operand): Likewise.
- (i386_target_format): Likewise.
- (intel_e11): Likewise.
- (operand_type): Remove implicitregister.
- (operand_type_check): Updated. Inline.
- (cpu_flags_all_zero): Removed.
- (operand_type_all_zero): Likewise.
- (i386_array_biop): Likewise.
- (cpu_flags_biop): Likewise.
- (operand_type_biop): Likewise.
-
-2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
-
-2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * configure.in (AC_CHECK_HEADERS): Add limits.h.
- * configure: Regenerated.
- * config.in: Likewise.
-
- * config/tc-i386.c: Include "opcodes/i386-init.h".
- (_i386_insn): Use i386_operand_type for types.
- (cpu_arch_flags): Updated to new types with bitfield.
- (cpu_arch_tune_flags): Likewise.
- (cpu_arch_isa_flags): Likewise.
- (cpu_arch): Likewise.
- (i386_align_code): Likewise.
- (set_code_flag): Likewise.
- (set_16bit_gcc_code_flag): Likewise.
- (set_cpu_arch): Likewise.
- (md_assemble): Likewise.
- (parse_insn): Likewise.
- (process_operands): Likewise.
- (output_branch): Likewise.
- (output_jump): Likewise.
- (parse_real_register): Likewise.
- (mode_from_disp_size): Likewise.
- (smallest_imm_type): Likewise.
- (pi): Likewise.
- (type_names): Likewise.
- (pt): Likewise.
- (pte): Likewise.
- (swap_2_operands): Likewise.
- (optimize_imm): Likewise.
- (optimize_disp): Likewise.
- (match_template): Likewise.
- (check_string): Likewise.
- (process_suffix): Likewise.
- (check_byte_reg): Likewise.
- (check_long_reg): Likewise.
- (check_qword_reg): Likewise.
- (check_word_reg): Likewise.
- (finalize_imm): Likewise.
- (build_modrm_byte): Likewise.
- (output_insn): Likewise.
- (disp_size): Likewise.
- (imm_size): Likewise.
- (output_disp): Likewise.
- (output_imm): Likewise.
- (gotrel): Likewise.
- (i386_immediate): Likewise.
- (i386_displacement): Likewise.
- (i386_index_check): Likewise.
- (i386_operand): Likewise.
+ (i386_att_operand): Likewise.
(parse_real_register): Likewise.
- (i386_intel_operand): Likewise.
- (intel_e09): Likewise.
- (intel_bracket_expr): Likewise.
- (intel_e11): Likewise.
- (cpu_arch_flags_not): New.
- (cpu_flags_check_x64): Likewise.
- (cpu_flags_all_zero): Likewise.
- (cpu_flags_not): Likewise.
- (i386_cpu_flags_biop): Likewise.
- (cpu_flags_biop): Likewise.
- (cpu_flags_match); Likewise.
- (acc32): New.
- (acc64): Likewise.
- (control): Likewise.
- (reg16_inoutportreg): Likewise.
- (disp16): Likewise.
- (disp32): Likewise.
- (disp32s): Likewise.
- (disp16_32): Likewise.
- (anydisp): Likewise.
- (baseindex): Likewise.
- (regxmm): Likewise.
- (imm8): Likewise.
- (imm8s): Likewise.
- (imm16): Likewise.
- (imm32): Likewise.
- (imm32s): Likewise.
- (imm64): Likewise.
- (imm16_32): Likewise.
- (imm16_32s): Likewise.
- (imm16_32_32s): Likewise.
- (operand_type): Likewise.
- (operand_type_check): Likewise.
- (operand_type_match): Likewise.
- (operand_type_register_match): Likewise.
- (update_imm): Likewise.
- (set_code_flag): Also update cpu_arch_flags_not.
- (set_16bit_gcc_code_flag): Likewise.
- (md_begin): Likewise.
- (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
- Use cpu_flags_match to match instructions.
- (i386_target_format): Update cpu_arch_isa_flags and
- cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
- (smallest_imm_type): Check cpu_arch_tune to tune for i486.
- (match_template): Don't initialize overlap0, overlap1,
- overlap2, overlap3 and operand_types.
- (process_suffix): Handle crc32 with 64bit register.
- (MATCH): Removed.
- (CONSISTENT_REGISTER_MATCH): Likewise.
-
- * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
- type.
-
-2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Handle invlpga, vmload,
- vmrun and vmsave in SVME.
- (process_suffix): Likewise.
-
-2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (i386_index_check): Don't use RegRex
- on the reg_type field.
- (parse_real_register): Use `||' instead of `|'.
-
-2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_operands): Remove segment override
- check on SVME instructions.
- (i386_index_check): Remove memory operand check on SVME
- instructions.
-
-2007-09-04 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
- (md_assemble): Update init of insn. Use insn.reloc instead of
- calculating from flag.
- (get_imm): Set reloc rather than flag.
- (calcop): Formatting.
-
-2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
-
- * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
-
-2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
-
- * doc/c-arc.texi: Fix typo.
-
-2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
- Intel mode.
-
-2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
- (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
- (mcf5407_ctrl): New.
- (m68k_cpus): Adjust 5407 entry.
-
-2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
-
- * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
- (m68k_cpus): Define 51QE cpu.
-
-2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
- Joseph Myers <joseph@codesourcery.com>
-
- * as.c (main): Flush stderr before printing listings to ensure
- consistent output order across platforms.
-
-2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
-
- * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
-
-2007-08-24 Joseph Myers <joseph@codesourcery.com>
- Paul Brook <paul@codesourcery.com>
-
- * remap.c: New.
- * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
- * as.c (show_usage): Document --debug-prefix-map option.
- (parse_args): Handle --debug-prefix-map.
- * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
- * stabs.c (stabs_generate_asm_file): Remap debug paths.
- * Makefile.am (GAS_CFILES): Add remap.c
- (GENERIC_OBJS): Add remap.o.
- Regenerate dependencies.
- * Makefile.in: Regenerate.
- * doc/as.texinfo (--debug-prefix-map): Document.
-
-2007-08-24 Aurelien Jarno <aurel32@debian.org>
-
- * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
- before printing them.
-
-2007-08-24 Anders Waldenborg <anders@0x63.nu>
- Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-i386.c (lex_got): Don't scan past a comma.
-
-2007-08-23 Ben Elliston <bje@au.ibm.com>
-
- * config/tc-ppc.c (parse_cpu): Handle "750cl".
- (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
- (md_show_usage): Document -m750cl.
- (md_assemble): Handle two delimiters in succession (eg. `),').
- * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
- * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
- * testsuite/gas/ppc/ppc750ps.s: New file.
- * testsuite/gas/ppc/ppc750ps.d: Likewise.
-
-2007-08-23 Ben Elliston <bje@au.ibm.com>
-
- * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
-
-2007-08-17 Alan Modra <amodra@bigpond.net.au>
-
- PR gas/4079
- * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
- expressions.
- (i386_immediate): Detect and complain about more cases of
- invalid immediate expressions. Return failure rather than
- converting them to zero.
- (i386_displacement): Likewise.
-
-2007-08-17 Alan Modra <amodra@bigpond.net.au>
-
- * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
-
-2007-08-14 Andreas Schwab <schwab@suse.de>
-
- * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
- unrepresentable.
-
-2007-08-12 Matthias Klose <doko@ubuntu.com>
-
- * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
- $(top_srcdir)/../../bfd/doc.
- * doc/Makefile.in: Regenerate.
-
-2007-08-10 Nick Clifton <nickc@redhat.com>
-
- * NEWS: Add a marker for the 2.18 features.
+ (md_parse_option): Likewise.
+ (i386_target_format): Likewise.
-2007-08-09 Paul Brook <paul@codesourcery.com>
+2008-02-14 Dimitry Andric <dimitry@andric.com>
- * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
+ PR gas/5712
+ * config/tc-arm.c (s_arm_unwind_save): Advance the input line
+ pointer past the comma after parsing a floating point register
+ name.
-2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-14 Hakan Ardo <hakan@debian.org>
- * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
+ PR gas/2626
+ * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
+ to AVR_ISA_2xxe.
+ (avr_operand): Disallow post-increment addressing in the lpm
+ instruction for the attiny26.
-2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-13 Jan Beulich <jbeulich@novell.com>
- * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
- DWORD memory to Reg64 in Intel synax.
- (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
- Reg32 in Intel syntax.
+ * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
+ if not in Intel mode.
+ (i386_intel_operand): Ignore segment overrides in immediate and
+ offset operands.
+ (intel_e11): Range-check i.mem_operands before use as array
+ index. Filter out FLAT for uses other than as segment override.
+ (intel_get_token): Remove broken promotion of "FLAT:" to mean
+ "offset FLAT:".
-2007-07-25 Sterling Augustine <sterling@tensilica.com>
+2008-02-13 Jan Beulich <jbeulich@novell.com>
- * config/tc-xtensa.c (xtensa_extui_opcode): New.
- (xg_expand_assembly_insn): Check for invalid extui operands.
- (md_begin): Initialize xtensa_extui_opcode.
+ * config/tc-i386.c (intel_e09): Also special-case 'bound'.
-2007-07-24 Nick Clifton <nickc@redhat.com>
+2008-02-13 Jan Beulich <jbeulich@novell.com>
- * config/tc-mep.h (skip_whitespace): Remove definition.
+ * config/tc-i386.c (allow_pseudo_reg): New.
+ (parse_real_register): Check for NULL just once. Allow all
+ register table entries when allow_pseudo_reg is non-zero.
+ Don't allow any registers without type when allow_pseudo_reg
+ is zero.
+ (tc_x86_regname_to_dw2regnum): Replace with ...
+ (tc_x86_parse_to_dw2regnum): ... this.
+ (tc_x86_frame_initial_instructions): Adjust for above change.
+ * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
+ (tc_parse_to_dw2regnum): New.
+ (tc_x86_regname_to_dw2regnum): Replace with ...
+ (tc_x86_parse_to_dw2regnum): ... this.
+ * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
+ (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
+ error handling.
-2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
+2008-02-12 Nick Clifton <nickc@redhat.com>
- * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
- (f32_15): Removed.
- (jump_31): New.
- (f32_patt): Remove f32_15.
- (f16_patt): Likewise.
- (i386_align_code): Updated to alt_long_patt for 64bit by
- default.
+ * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
+ argument.
+ (tic4x_insn_add): Likewise.
+ (md_begin): Drop cast that was discarding a const qualifier.
+ * config/tc-d30v.c (get_reloc): Add const qualifier to op
+ argument.
+ (build_insn): Drop cast that was discarding a const qualifier.
- * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
+2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
-2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
+ * config/tc-i386.c (cpu_arch): Add .xsave.
+ (md_show_usage): Add .xsave.
- * config/tc-i386.c (i386_align_code): Enable alignment up to
- MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
- for K8.
+ * doc/c-i386.texi: Add xsave to -march=.
- * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
+2008-02-07 Alan Modra <amodra@bigpond.net.au>
-2007-07-20 Nick Clifton <nickc@redhat.com>
+ * read.c (s_weakref): Don't pass unadorned NULL to concat.
+ * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
- * app.c (do_scrub_chars): Provide a one character buffer to hold a
- pushed back newline at the end of an unterminated quoted string.
-
-2007-07-14 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (create_register_alias): Return a boolean rather
- than an integer.
- Check the return value of insert_reg_alias and do not continue to
- create aliases once an insertion has failed.
- (s_unreq): Delete the all-upper-case and all-lower-case
- alternatives as well.
-
-2007-07-12 Kai Tietz <kai.tietz@onevision.com>
-
- * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
- * write.c: Likewise.
-
-2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
-
- * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
- HAVE_64BIT_SYMBOLS.
-
-2007-07-04 Richard Sandiford <richard@codesourcery.com>
-
- * config/tc-mips.c (mips_cpu_info_table): Add new entries for
- {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
- Deprecate *x and *fx.
- * doc/c-mips.texi: Document the new CPU arguments. Deprecate
- *x and *fx.
-
-2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/obj-coff.h (x86_64_target_format): Renamed to ...
- (i386_target_format): This
- (TARGET_FORMAT): Use i386_target_format.
-
- * config/tc-i386.c (x86_64_target_format): Removed.
- (i386_target_format): Handle PE formats.
-
-2007-07-04 Nick Clifton <nickc@redhat.com>
-
- * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
- to get the right length of printed value.
-
-2007-07-03 Nick Clifton <nickc@redhat.com>
-
- * COPYING: Replace with GPLv3 text.
- * app.c: Update copyright notice to refer to GPLv3.
- * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
- cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
- dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
- emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
- flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
- input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
- itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
- macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
- read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
- symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
- config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
- config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
- config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
- config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
- config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
- config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
- config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
- config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
- config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
- config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
- config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
- config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
- config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
- config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
- config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
- config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
- config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
- config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
- config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
- config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
- config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
- config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
- config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
- config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
- config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
- config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
- config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
- config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
- config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
- config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
- config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
- config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
- config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
- config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
- config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
- config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
- config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
- config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
- config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
- config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
- config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
- config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
- config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
- config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
- config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
- config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
- config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
- config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
- config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
- config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
+2008-02-05 Sterling Augustine <sterling@tensilica.com>
- * flonum-mult.c: Likewise, and also correct typo referring to
- non-existant GNU Assembler General Public License.
- * config/tc-m68851.h: Likewise.
- * NEWS: Mention the new license. Also note where the 2.17 release
- happened.
- * config/e-crisaout.c: Add copyright header.
- * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
- config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
- config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
- config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
- config/te-generic.h, config/te-gnu.h, config/te-go32.h,
- config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
- config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
- config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
- config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
- config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
- config/te-pep.h, config/te-psos.h, config/te-riscix.h,
- config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
- config/te-wince-pe.h: Likewise.
-
-2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (m68k_ip): Add j & K operand types.
- (install_operand): Add E encoding.
- (md_begin): Check and skip initial '.' arg character.
- (get_num): Add 0..511 case.
-
-2007-07-03 Alan Modra <amodra@bigpond.net.au>
-
- PR 4713
- * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
- * config/obj-elf.h (obj_ecoff_set_ext): Comment.
-
-2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
-
- PR 4722
- * app.c (do_scrub_chars <state 5>): Check for output buffer full
- after memcpy.
-
-2007-07-02 Joseph Myers <joseph@codesourcery.com>
-
- * config/tc-mips.c (s_dtprelword, s_dtpreldword,
- s_dtprel_internal): New.
- (mips_pseudo_table): Add .dtprelword and .dtpreldword.
- (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
- BFD_RELOC_MIPS_TLS_DTPREL64.
-
-2007-07-02 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
- * aclocal.m4: Regenerate.
- * config.in: Regenerate.
- * doc/Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
- * po/gas.pot: Regenerate.
-
-2007-07-02 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
- coff section flag values to bfd section flag.
-
-2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
-
- * aclocal.m4: Regenerated.
- * doc/Makefile.in: Likewise.
- * Makefile.in: Likewise.
-
-2007-06-29 Joseph Myers <joseph@codesourcery.com>
-
- * as.c (main): Only call create_obj_attrs_section if IS_ELF.
-
-2007-06-29 Joseph Myers <joseph@codesourcery.com>
-
- * as.c (create_obj_attrs_section): New.
- (main): Call create_obj_attrs_section for ELF.
- * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
- skip_past_comma, s_vendor_attribute): New.
- (potable): Add gnu_attribute for ELF.
- * read.h (s_vendor_attribute): Declare.
- * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
- round s_vendor_attribute.
- (aeabi_set_public_attributes): Update for new attributes
- interfaces.
- (arm_md_end): Remove attributes contents setting now done
- generically.
-
-2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
-
- * Makefile.am: Add CR16 related entry.
- * Makefile.in: Regenerate.
- * config/tc-cr16.h: New file
- * config/tc-cr16.c: New file
- * doc/c-cr16.texi: New file for cr16
- * doc/all.texi: Entry for cr16
- * doc/Makefile.am: Added c-cr16.texi
- * doc/Makefile.in: Regenerate
- * doc/as.texinfo: Entry for CR16 target
- * NEWS: Announce the support for the new target.
-
-2007-06-26 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
- for OP_RVC.
- (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
-
-2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_operands): Replace regKludge
- with RegKludge.
-
-2007-06-25 Richard Sandiford <richard@codesourcery.com>
-
- * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
- * config/tc-mips.c (append_insn): Record which symbols have
- R_MIPS16_26 relocations against them.
- (mips_fix_adjustable): Don't reduce relocations against such symbols.
-
-2007-06-22 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
- (frag_format_size): Handle RELAX_IMMED_STEP3.
- (xtensa_relax_frag, md_convert_frag): Likewise.
- * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
- (RELAX_IMMED_MAXSTEPS): Adjust.
- * config/xtensa-relax.c (widen_spec_list): Add transitions from
- wide branches to branch-over-jumps.
- (build_transition): Handle wide branches in transition patterns.
+ * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
+ checks into assertions. When relaxation produces an operation that
+ does not fit in the current FLIX instruction, make sure that the
+ operation is relaxed as needed to account for being placed following
+ the current instruction.
-2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (disp_size): New.
- (imm_size): Likewise.
- (output_disp): Use disp_size and imm_size.
- (output_imm): Use imm_size.
+2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
-2007-06-19 Sterling Augustine <sterling@tensilica.com>
+ PR 5715
+ * configure: Regenerated.
- * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
- use of literal_frag field.
- * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
- in the literal_frag field.
- (xtensa_move_literals): Use it here instead of searching. Update
- literal_frag field with new value.
+2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
-2007-06-14 Paul Brook <paul@codesourcery.com>
+ * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
- * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
- narrow shift by immediate.
+2008-01-31 Marc Gauthier <marc@tensilica.com>
-2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
+ * configure.tgt (xtensa*-*-*): Recognize processor variants.
- * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
+2008-01-25 Kai Tietz <kai.tietz@onevision.com>
- * acinclude.m4: Don't include m4 files.
- (BFD_BINARY_FOPEN): Removed.
- Remove libtool kludge.
+ * read.c: (emit_expr): Correct for mingw use of printf size
+ specifier.
- * Makefile.in: Regenerated.
- * doc/Makefile.in: Likewise.
- * aclocal.m4: Likewise.
- * configure: Likewise.
-
-2007-06-11 Sterling Augustine <sterling@tensilica.com>
- Bob Wilson <bob.wilson@acm.org>
+2008-01-24 Bob Wilson <bob.wilson@acm.org>
- * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
- (XTENSA_PROP_NO_TRANSFORM): ...this.
- (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
- (xtensa_mark_frags_for_org): New.
- (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
- (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
- (get_frag_property_flags): Adjust reference to is_no_transform flag.
- (xtensa_frag_flags_combinable): Likewise.
- (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
- * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
+ * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
+ can only be encoded in FLIX instructions but are not specified as such.
+ (Xtensa Automatic Alignment): Remove obsolete comment about debugging
+ labels.
-2007-06-06 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (s_align): Pad code sections appropriately.
-
-2007-06-05 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
-
-2007-06-05 Nick Clifton <nickc@redhat.com>
-
- PR gas/4587
- * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
-
-2007-06-05 Alan Modra <amodra@bigpond.net.au>
+2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
- number@ppu.
- (tc_gen_reloc): Abort if neither addsy or subsy is set.
- (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
- * config/tc-spu.h (md_operand): Handle @ppu without sym.
+ * NEWS: Mention new command line options for x86 targets.
-2007-05-31 Paul Brook <paul@codesourcery.com>
+2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-arm.c (insns): Allow strex on M profile cores.
+ * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
-2007-05-29 David S. Miller <davem@davemloft.net>
- Jakub Jelinek <jakub@redhat.com>
+2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
- PR gas/4558
- * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
- for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
+ * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
-2007-05-29 Alan Modra <amodra@bigpond.net.au>
+2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
+ * config/tc-i386.c (md_show_usage): Show more processors for
+ -march=/-mtune=.
-2007-05-29 Alan Modra <amodra@bigpond.net.au>
+2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-ppc.c: Convert to ISO C.
- * config/tc-ppc.c: Likewise.
+ * config/tc-i386.c (i386_target_format): Remove cpummx2.
-2007-05-29 Alan Modra <amodra@bigpond.net.au>
+2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
- * write.h (EXEC_MACHINE_TYPE): Delete.
- (string_byte_count, section_alignment): Delete.
+ * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
+ (XXX_MNEM_SUFFIX): Likewise.
+ (END_OF_INSN): Likewise.
+ (templates): Likewise.
+ (modrm_byte): Likewise.
+ (rex_byte): Likewise.
+ (DREX_XXX): Likewise.
+ (drex_byte): Likewise.
+ (sib_byte): Likewise.
+ (processor_type): Likewise.
+ (arch_entry): Likewise.
+ (cpu_sub_arch_name): Remove const.
+ (cpu_arch): Add .vmx and .smx.
+ (set_cpu_arch): Append cpu_sub_arch_name.
+ (md_parse_option): Support -march=CPU[,+EXTENSION...].
+ (md_show_usage): Updated.
-2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
+ * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
+ (XXX_MNEM_SUFFIX): Likewise.
+ (END_OF_INSN): Likewise.
+ (templates): Likewise.
+ (modrm_byte): Likewise.
+ (rex_byte): Likewise.
+ (DREX_XXX): Likewise.
+ (drex_byte): Likewise.
+ (sib_byte): Likewise.
+ (processor_type): Likewise.
+ (arch_entry): Likewise.
- * app.c (do_scrub_chars): Cope with \ at end of buffer.
+ * doc/as.texinfo: Update i386 -march option.
-2007-05-26 Alan Modra <amodra@bigpond.net.au>
+ * doc/c-i386.texi: Update -march= for ISA.
- * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
- top 32 bits of 64 bit value if so doing results in passing
- range check. Rewrite sign extension fudges similarly. Enable
- fudges for powerpc64 too. Report user value if range check
- fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
- range rather than value, also to report user value on failure.
-
-2007-03-25 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (T2_SUBS_PC_LR): Define.
- (do_t_add_sub): Correctly encode subs pc, lr, #const.
- (do_t_mov_cmp): Correctly encode movs pc, lr.
-
-2007-05-24 Steve Ellcey <sje@cup.hp.com>
-
- * Makefile.in: Regnerate.
- * configure: Regenerate.
- * aclocal.m4: Regenerate.
- * doc/Makefile.in: Regenerate.
-
-2007-05-22 Bob Wilson <bob.wilson@acm.org>
+2008-01-18 Bob Wilson <bob.wilson@acm.org>
- * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
- and index entries about automatic alignment of ENTRY instructions.
+ * config/tc-xtensa.c (xtensa_leb128): New function.
+ (md_pseudo_table): Use it for sleb128 and uleb128.
+ (is_leb128_expr): New internal flag.
+ (xtensa_symbol_new_hook): Check new flag.
-2007-05-22 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo: Use @copying around the copyright notice.
-
-2007-05-18 Joseph Myers <joseph@codesourcery.com>
-
- * config/tc-mips.c (s_mipsset): Use generic s_set for directives
- containing a comma.
-
-2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/4517
- 2003-06-05 Michal Ludvig <mludvig@suse.cz>
- * doc/as.texinfo: Document new directives: .cfi_restore,
- .cfi_undefined, .cfi_same_value, .cfi_return_column,
- .cfi_remember_state and .cfi_restore_state.
-
-2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (md_apply_fix): Show value of out of range
- fixups in error message.
- (md_conver_frag_1): Propagate the fix source location and use
- as_bad_where rather than fatal, for better error messages.
-
-2007-05-16 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
-
-2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
-
- * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
-
-2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
-
- PR gas/3041
- * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
- addend is stored for relocs against weak symbols.
- (md_apply_fix): So not loose track of addend for relocs against
- weak symbols.
-
-2007-05-14 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
-
-2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
-
- * config/tc-score.c (data_op2, validate_immediate): Fix bug for
- addri, addri.c, subi, and subi.c when immediate number is hex.
- (score_insns): Remove subis and subis.c.
- (do_sub_rdi16): Delete.
-
-2007-05-11 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
- spu_cons for word.
- (md_assemble): Tidy use of insn.flag.
- (get_imm): Likewise. Handle uppercase input too.
- (spu_cons): New function.
- * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
- (TC_FORCE_RELOCATION): Don't resolve them either.
-
-2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
-
- * config/tc-arm.c (md_apply_fix): Generate more accurate
- diagnostic when 8-bit immediate range is exceeded for
- BFD_RELOC_ARM_OFFSET_IMM8.
-
-2007-05-04 Alan Modra <amodra@bigpond.net.au>
-
- PR gas/4460
- * config/tc-i386.c (lex_got): Don't replace the reloc token with
- a space if we already have a space.
-
-2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Don't explicitly check
- suffix for crc32 in Intel mode.
- (process_suffix): Issue an error for crc32 if the operand size
- is ambiguous.
-
-2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
- Nick Clifton <nickc@redhat.com>
-
- PR gas/3041
- * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
- (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
- (md_apply_fix): Put zero values into the frags referencing weak
- symbols.
-
-2007-05-02 Alan Modra <amodra@bigpond.net.au>
-
- PR 4448
- * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
- PPC_OPERAND_PLUS1.
-
-2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Check suffix for crc32 in
- Intel mdoe.
- (process_suffix): Default the suffix of 8bit crc32 to
- BYTE_MNEM_SUFFIX.
- (check_byte_reg): Skip check for 8bit crc32.
-
-2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Use register_prefix in
- error/warning message.
- (check_byte_reg): Likewise.
- (check_long_reg): Likewise.
- (check_qword_reg): Likewise.
- (check_word_reg): Likewise.
- (process_operands): Likewise.
-
-2007-04-30 Alan Modra <amodra@bigpond.net.au>
+2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
- PR 4436
- * config/tc-ppc.c (ppc_insert_operand): Disable range check if
- min > max.
+ * config/tc-avr.c (mcu_types): Change opcode set for avr3,
+ at90usb82, at90usb162.
+ * doc/c-avr.texi: Change architecture grouping for at90usb82,
+ at90usb162.
+ These changes support the new avr35 architecture group in gcc.
-2007-04-28 Thiemo Seufer <ths@networkno.de>
+2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-mips.c: Fix comment.
+ * config/tc-i386.c (md_assemble): Also zap movzx and movsx
+ suffix for AT&T syntax.
-2007-04-26 Anatoly Sokolov <aesok@post.ru>
+2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-avr.c (mcu_types): Add support for atmega8hva and
- atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
- * doc/c-avr.texi: Document new devices.
-
-2007-04-24 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
-
-2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (mcf54455_ctrl): New.
- (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
- (m68k_archs): Add isac.
- (m68k_cpus): Add 54455 family.
- (m68k_ip): Split Bg into Bb, Bs, Bg.
- (m68k_elf_final_processing): Add ISA_C.
- * doc/c-m68k.texi (M680x0 Options): Add isac.
-
-2007-04-22 Alan Modra <amodra@bigpond.net.au>
-
- * read.c (read_a_source_file): Skip multiple spaces to
- cover hack in mmix md_start_line_hook which overwrites a
- colon with a space. Delete sermon and needless assertion.
-
-2007-04-21 Alan Modra <amodra@bigpond.net.au>
-
- * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
- (md_atof): Make number_of_chars unsigned. Revert last change.
- * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
- * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
- * config/tc-sh.h (md_optimize_expr): Likewise.
- * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
- assertion.
- * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
-
-2007-04-21 Nick Clifton <nickc@redhat.com>
-
- * config/atof-vax.c (md_atof): Fix comparison inside know().
-
- * config/tc-ia64.c (emit_one_bundle): Fix typo.
-
-2007-04-21 Alan Modra <amodra@bigpond.net.au>
-
- * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
- * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
- Don't skip over NUL char.
- (pseudo_set): Set X_op for registers to O_register.
- * symbols.c (symbol_clone): Remove assertion that sym is defined.
- (resolve_symbol_value): Resolve O_register symbols.
- * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
- Instead find st(0) by hash lookup.
- * config/tc-ppc.c (ppc_macro): Warning fix.
-
- * as.h (ENABLE_CHECKING): Default define to 0.
- (know): Assert if ENABLE_CHECKING.
- (struct relax_type): Remove superfluous declaration.
- * configure.in (--enable-checking): New.
- * configure: Regenerate.
- * config.in: Regenerate.
- * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
- Check for duplicate powerpc_operands entries.
-
-2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (mcf5253_ctrl): New.
- (mcf52223_ctrl): New.
- (m68k_cpus): Add 5253, 52221, 52223.
-
- * config/m68k-parse.h (RAMBAR_ALT): New.
- * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
- (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
- mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
- mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
- mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
- RAMBAR1.
- (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
- (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
- (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
- to control register mapping.
-
-2007-04-20 Alan Modra <amodra@bigpond.net.au>
-
- * messages.c (as_internal_value_out_of_range): Fix typo in
- error message. Return after printing domain error.
- * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
- in max when shifting right.
-
-2007-04-20 Alan Modra <amodra@bigpond.net.au>
-
- * messages.c (as_internal_value_out_of_range): Extend to report
- errors for values with invalid low bits set.
- * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
- fields. Check that operands and opcode fields are disjoint.
- (ppc_insert_operand): Check operands using mask rather than bit
- count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
- insertion code.
- (md_apply_fix): Adjust for struct powerpc_operand change.
-
-2007-04-19 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
- Thumb-1. Add sanity check for bogus relaxations.
-
-2007-04-19 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
-
-2007-04-19 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
-
-2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
-
- * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
-
-2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
-
-2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
- (match_template): Handle operand size for crc32 in SSE4.2.
- (process_suffix): Handle operand type for crc32 in SSE4.2.
- (output_insn): Support SSE4.2.
-
-2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add .sse4.1.
- (process_operands): Adjust implicit operand for blendvpd,
- blendvps and pblendvb in SSE4.1.
- (output_insn): Support SSE4.1.
-
-2007-04-18 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
-
-2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
-
- * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
- of as_warn_where for misaligned data.
-
-2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
-
- * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
- rs_fill frags.
-
-2007-04-14 Steve Ellcey <sje@cup.hp.com>
-
- * Makefile.am: Add ACLOCAL_AMFLAGS.
- * Makefile.in: Regenerate.
-
-2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
-
- * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
- (sh_optimize_expr): Likewise.
- * config/tc-sh.h (md_optimize_expr): Define.
- (sh_optimize_expr): Prototype.
-
-2007-04-06 Matt Thomas <matt@netbsd.org>
-
- * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
- to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
- heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
-
-2007-04-04 Kazu Hirata <kazu@codesourcery.com>
-
- * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
-
-2007-04-04 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_neon_ext): Enforce immediate range.
- (insns): Use I15 for vext.
-
-2007-04-04 Paul Brook <paul@codesourcery.com>
-
- * configure.tgt: Loosen checks for arm uclinux eabi targets.
-
-2007-04-02 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (xtensa_flush_pending_output): Check
- outputting_stabs_line_debug.
-
-2007-03-26 Anatoly Sokolov <aesok@post.ru>
-
- * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
- at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
- devices.
- * doc/c-avr.texi: Document new devices.
-
-2007-04-02 Richard Sandiford <richard@codesourcery.com>
-
- * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
- * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
- * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
-
-2007-03-30 Sterling Augustine <sterling@tensilica.com>
- Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
- Do not check is_loop_target flag.
- (xtensa_frob_label): Adjust calls to xtensa_move_labels.
- (xg_assemble_vliw_tokens): Likewise. Also avoid calling
- xtensa_move_labels for alignment of loop opcodes.
-
-2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_suffix): Reindent a bit.
-
-2007-03-30 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (encode_thumb2_ldmstm): New function.
- (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
- (do_t_push_pop): Use encode_thumb2_ldmstm.
+ * config/tc-i386.c (match_reg_size): New.
+ (match_mem_size): Likewise.
+ (operand_size_match): Likewise.
+ (operand_type_match): Also clear all size fields.
+ (match_template): Skip Intel syntax when in AT&T syntax.
+ Call operand_size_match to check operand size.
+ (i386_att_operand): Set the mem field to 1 for memory
+ operand.
+ (i386_intel_operand): Likewise.
-2007-03-29 DJ Delorie <dj@redhat.com>
+2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-m32c.c (rl_for, relaxable): Protect argument.
- (md_relax_table): Add entries for ADJNZ macros.
- (M32C_Macros): Add ADJNZ macros.
- (subtype_mappings): Add entries for ADJNZ macros.
- (insn_to_subtype): Check for adjnz and sbjnz insns.
- (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
- (md_convert_frag): Convert adjnz and sbjnz.
+ PR gas/5534
+ * config/tc-i386.c (_i386_insn): Update comment.
+ (operand_type_match): Also clear unspecified.
+ (operand_type_register_match): Likewise.
+ (parse_operands): Initialize unspecified.
+ (i386_intel_operand): Likewise.
+ (match_template): Check memory and accumulator operand size.
+ (i386_att_operand): Clear unspecified on register operand.
+ (intel_e11): Likewise.
+ (intel_e09): Set operand size and clean unspecified for
+ "XXX PTR".
-2007-03-29 Nick Clifton <nickc@redhat.com>
+2008-01-11 Andreas Schwab <schwab@suse.de>
- * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
- initialization.
- * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
- using ITBL_NUMBER_OF_PROCESSORS.
- * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
+ * read.c (s_space): Declare `repeat' as offsetT.
-2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
+2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-i386.c (build_modrm_byte): For instructions with 2
- register operands, encode destination in i.rm.regmem if its
- RegMem bit is set.
+ * config/tc-i386.c (match_template): Check processor support
+ first.
-2007-03-28 Richard Sandiford <richard@codesourcery.com>
- Phil Edwards <phil@codesourcery.com>
+2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
- * doc/as.texinfo: Put the contents after the title page rather
- than at the end of the document.
+ * config/tc-i386.c (match_template): Continue if processor
+ doesn't match.
-2007-03-27 Alan Modra <amodra@bigpond.net.au>
+2008-01-09 Alexandre Oliva <aoliva@redhat.com>
- * NEWS: Mention ".reloc".
+ * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
+ unwind personality function address.
-2007-03-26 Sterling Augustine <sterling@tensilica.com>
+2008-01-09 Bob Wilson <bob.wilson@acm.org>
- * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
- in FLIX instructions.
+ * dwarf2dbg.c (out_sleb128): Delete.
+ (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
+ (out_fixed_inc_line_addr): Delete.
+ (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
+ size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
+ (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
+ (process_entries): Remove calls to out_fixed_inc_line_addr. When
+ DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
+ * read.h (emit_expr_fix): New prototype.
+ * read.c (emit_expr): Move code to emit_expr_fix and use it here.
+ (emit_expr_fix): New.
-2007-03-26 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (arm_it): Add immisfloat field.
- (parse_qfloat_immediate): Disallow integer syntax for floating-point
- immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
- (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
- float.
- (neon_cmode_for_move_imm): Reject non-float immediates for float
- operands.
- (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
-
-2007-03-26 Julian Brown <julian@codesourcery.com>
-
- * doc/c-arm.texi: Add documentation for .dn/.qn directives.
-
-2007-03-26 Alan Modra <amodra@bigpond.net.au>
-
- * doc/as.texinfo (Reloc): Document.
- * read.c (potable): Add "reloc".
- (s_reloc): New function.
- * write.c (reloc_list): New global var.
- (resolve_reloc_expr_symbols): New function.
- (write_object_file): Call it.
- (write_relocs): Process reloc_list.
- * write.h (struct reloc_list): New.
- (reloc_list): Declare.
-
-2007-03-24 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
-
-2007-03-24 Paul Brook <paul@codesourcery.com>
- Mark Shinwell <shinwell@codesourcery.com>
-
- * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
- (parse_operands): Don't expect comma if first operand missing.
- Handle OP_oRRw.
- (do_srs): Encode register number, checking it is r13. Update comment.
- (insns): Update SRS entries to take a register.
-
-2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
-
-2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
-
- * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
- attempt to jump to the next instruction into NOPs.
-
-2007-03-23 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-spu.c: Don't include opcode/spu.h.
- (md_assemble): Set tc_fix_data.insn_tag and arg_format.
- (md_apply_fix): Adjust.
- * config/tc-spu.h: Include opcode/spu.h.
- (struct tc_fix_info): New.
- (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
- (TC_FORCE_RELOCATION): Define.
-
-2007-03-22 Joseph Myers <joseph@codesourcery.com>
-
- * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
-
-2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_suffix): Check 0x90 instead of
- xchg for xchg %rax,%rax.
-
-2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
- and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
-
-2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/4218
- * config/tc-i386.c (match_template): Properly handle 64bit mode
- "xchg %eax, %eax".
-
-2007-03-21 Anton Ertl <anton@mips.complang.tuw>
-
- PR gas/4124
- * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
-
-2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-
- * Makefile.am: Run dep-am.
- * Makefile.in: Regenerated.
-
- * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
-
- * config/tc-i386.h: Include "opcodes/i386-opc.h".
- (NOP_OPCODE): Removed.
- (template): Likewise.
-
-2007-03-21 Andreas Schwab <schwab@suse.de>
-
- * config/tc-i386.h (NOP_OPCODE): Restore.
-
-2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
-
- * config/tc-arm.c (do_mul): Don't warn about overlapping
- Rd and Rm operands when assembling for v6 or above.
- Correctly capitalize register names in the messages.
- (do_mlas): Likewise. Delete spurious blank line.
+2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
-2007-03-16 Kazu Hirata <kazu@codesourcery.com>
+ * config/tc-i386.c (match_template): Check register size
+ only when size of operands can be encoded the canonical way.
- * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
+2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
-2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
+ * config/tc-i386.c (i386_operand): Renamed to ...
+ (i386_att_operand): This.
+ (parse_operands): Updated.
- * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
- i386_regtab.
- (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
- on i386_regtab.
+2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
-2007-03-15 Alexandre Oliva <aoliva@redhat.com>
+ * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
- PR gas/4184
- * app.c (do_scrub_chars): PUT after setting states.
+ * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
+ only.
+ (md_assemble): Remove Intel mode workaround.
+ (match_template): Check support for old gcc, AT&T mnemonic
+ and Intel Syntax.
+ (md_parse_option): Don't set intel_mnemonic to 0 for
+ OPTION_MOLD_GCC.
-2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
+2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerated.
-
- * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
- "opcode/i386.h".
- (md_begin): Check reg_name != NULL for the last entry in
- i386_regtab.
-
- * config/tc-i386.h: Move many entries to opcode/i386.h and
- opcodes/i386-opc.h.
-
- * configure.in (need_opcodes): Set true for i386.
- * configure: Regenerated.
-
-2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * Makefile.am (REPORT_BUGS_TO): Removed.
- (INCLUDES): Remove -DREPORT_BUGS_TO.
- * Makefile.in: Regenerated.
+ * config/tc-i386.h: Update copyright to 2008.
- * configure.in (--with-bugurl): Removed.
- * configure: Regenerated.
-
- * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
- (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
- (TEXI2DVI): Likewise.
- (gasver.texi): Removed.
- (MOSTLYCLEANFILES): Remove gasver.texi.
- (as.1): Don't depend on gasver.texi.
- * doc/Makefile.in: Regenerated.
-
- * doc/as.texi: Include bfdver.texi instead of gasver.texi.
-
-2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
+2008-01-04 Nick Clifton <nickc@redhat.com>
- * config/tc-arm.c (arm_copy_symbol_attributes): New.
- * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
- (TC_COPY_SYMBOL_ATTRIBUTES): Define.
- * gas/symbols.c (copy_symbol_attributes): Use
- TC_COPY_SYMBOL_ATTRIBUTES.
+ * config/tc-ppc.c (parse_cpu): Preserve the settings of the
+ PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
-2007-03-14 Paul Brook <paul@codesourcery.com>
+2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
+ * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
+ of SYSV386_COMPAT.
-2007-03-14 Alan Modra <amodra@bigpond.net.au>
+2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
- PR 4029
- * write.c (relax_segment): Insert extra alignment padding
- to break infinite relax loop when given impossible
- gcc_except_table assembly.
-
-2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
- on i.tm.base_opcode.
+ * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
+ (cpu_flags_not): Likewise.
+ (cpu_flags_match): Updated to check 64bit and arch.
+ (set_code_flag): Remove cpu_arch_flags_not.
+ (set_16bit_gcc_code_flag): Likewise.
+ (set_cpu_arch): Likewise.
+ (md_begin): Likewise.
+ (parse_insn): Call cpu_flags_match to check 64bit and arch.
(match_template): Likewise.
- (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
-
- * config/tc-i386.h (Opcode_D): New.
- (Opcode_FloatR): Likewise.
- (Opcode_FloatD): Likewise.
- (D): Redefined.
- (W): Likewise.
- (FloatMF): Likewise.
- (FloatR): Likewise.
- (FloatD): Likewise.
-
-2007-03-09 Alexandre Oliva <aoliva@redhat.com>
-
- * app.c (do_scrub_chars): Recognize comments after # line "file".
- * read.c (get_linefile_number): New.
- (s_app_line): Accept ill-formed .linefile lines as comments.
-
-2007-03-09 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-i386.h (WORKING_DOT_WORD): Define.
-
-2007-03-09 Alexandre Oliva <aoliva@redhat.com>
-
- * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
- * as.h (new_logical_line_flags): New.
- * input-scrub.c (new_logical_line): Turned into wrapper for...
- (new_logical_line_flags): this. Handle flags.
- * read.c (potable): Add linefile. Adjust appline argument.
- (s_app_file): Fake .appfiles no more.
- (s_app_line): For .linefile, accept file name and flags.
-
-2007-03-08 Alan Modra <amodra@bigpond.net.au>
-
- * symbols.c (symbol_relc_make_sym): Comment typo fixes.
-
-2007-03-08 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2007-03-07 Joseph Myers <joseph@codesourcery.com>
-
- * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
- bug-reporting URL.
- * doc/Makefile.am (gasver.texi): Define BUGURL.
- * doc/as.texinfo: Use BUGURL.
- * Makefile.in, configure, doc/Makefile.in: Regenerate.
-
-2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
-
- * config/tc-s390.c (md_parse_option): z9-ec option added.
-
-2007-03-02 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (relax_immediate): Always return positive values.
- (relaxed_symbol_addr): New function.
- (relax_adr, relax_branch): Use it.
- (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
-
-2007-03-01 Joseph Myers <joseph@codesourcery.com>
-
- * as.c (parse_args): Update copyright date.
-
-2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
-
- * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
-
-2007-02-28 Nick Clifton <nickc@redhat.com>
-
- PR gas/3797
- * config/tc-d10v.c (do_assemble): Do not generate error messages,
- just return -1 whenever a problem is encountered.
- (md_assemble): If do_assemble returns -1 generate a non-fatal
- error message and return.
-
- PR gas/2623
- * config/tc-msp430.c (line_separator_char): Change to '{'.
-
-2007-02-27 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-m68hc11.c (fixup24): Correct fixup size.
- (build_jump_insn): Likewise.
- (build_insn): Likewise.
- (s_m68hc11_relax): Likewise.
-
-2007-02-27 Alan Modra <amodra@bigpond.net.au>
-
- * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
-
-2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
-
- * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
-
-2007-02-23 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
- (md_assemble): Likewise.
-
-2007-02-22 Alan Modra <amodra@bigpond.net.au>
-
- * write.c (size_seg): Always clear SEC_RELOC here.
- (install_reloc): New function, extracted from..
- (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
- with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
- testing frag size. Set SEC_RELOC here.
-
-2007-02-21 Alan Modra <amodra@bigpond.net.au>
- PR 4082
- * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
+2008-01-03 Jakub Jelinek <jakub@redhat.com>
-2007-02-20 Thiemo Seufer <ths@mips.com>
+ * config/tc-i386.c (process_drex): Initialize modrm_reg and
+ modrm_regmem to 0 instead of None.
- * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
+2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
-2007-02-20 Thiemo Seufer <ths@mips.com>
+ * config/tc-i386.c (match_template): Use the xmmword field
+ instead of no_xsuf.
- * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
+2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
-2007-02-20 Thiemo Seufer <ths@mips.com>
- Chao-Ying Fu <fu@mips.com>
+ * config/tc-i386.c (process_suffix): Fix a typo.
- * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
- ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
- (macro_build): Add case '2'.
- (macro): Expand M_BALIGN to nop, packrl.ph or balign.
- (validate_mips_insn): Add support for balign instruction.
- (mips_ip): Handle DSP R2 instructions. Support balign instruction.
- (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
- md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
- command line options.
- (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
- (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
- * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
- .set dspr2, .set nodspr2.
+2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
-2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
- (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
-
-2007-02-18 Alan Modra <amodra@bigpond.net.au>
-
- * write.c (TC_FX_SIZE_SLACK): Define.
- (write_relocs): Reinstate check for fixup within frag.
- * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
- * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
- * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
- * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
- * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
-
-2007-02-17 Mark Mitchell <mark@codesourcery.com>
- Nathan Sidwell <nathan@codesourcery.com>
- Vladimir Prus <vladimir@codesourcery.com
- Joseph Myers <joseph@codesourcery.com>
-
- * configure.in (--with-bugurl): New option.
- * configure: Regenerate.
- * dep-in.sed: Remove bin-bugs.h.
- * Makefile.am (REPORT_BUGS_TO): Define.
- (INCLUDES): Define REPORT_BUGS_TO.
- (DEP_INCLUDES): Likewise.
- ($(OBJS)): No longer depend on bin-bugs.h.
- * Makefile.in: Regenerate.
- * doc/Makefile.in: Regenerate.
- * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
- * as.h: Remove include of bin-bugs.h.
-
-2007-02-17 Alan Modra <amodra@bigpond.net.au>
-
- * write.c: White space fixes.
- (fixup_segment): Move symbol_mri_common_p adjustments..
- (write_relocs): ..and symbol_equated_reloc_p adjustments..
- (adjust_reloc_syms): ..to here.
-
-2007-02-16 Alan Modra <amodra@bigpond.net.au>
-
- * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
- xmalloc, memset. Don't bother assigning NULL to known zero mem.
- (subseg_set_rest): Remove unnecessary cast.
- * write.c: Include libbfd.h. Replace PTR with void * throughout.
- Remove unnecessary forward declarations and casts.
- (set_symtab): Delete extern bfd_alloc.
- (fixup_segment): Move.
-
-2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
- * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
- (mcf5475_ctrl, mcf5485_ctrl): New.
- (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
- (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
- (init_table): Add asid, mmubar, adjust rombar0.
-
-2007-02-14 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
- * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
- (process_operands): Move old Seg2ShortForm and Seg3ShortForm
- code, and test for these insns using a combination of
- opcode_modifier and operand_types.
-
-2007-02-07 Paul Brook <paul@codesourcery.com>
-
- * configure.tgt: Add arm*-*-uclinux-*eabi.
-
-2007-02-05 Dave Brolley <brolley@redhat.com>
- Richard Sandiford <rsandifo@redhat.com>
- DJ Delorie <dj@redhat.com>
- Stan Cox <scox@redhat.com>
- Jim Blandy <jimb@redhat.com>
- Nick Clifton <nickc@redhat.com>
- Jim Wilson <wilson@redhat.com>
- Frank Ch. Eigler <fche@redhat.com>
- Graydon Hoare <graydon@redhat.com>
- Ben Elliston <bje@redhat.com>
- John Healy <jhealy@redhat.com>
- Richard Henderson <rth@redhat.com>
-
- * Makefile.am (CPU_TYPES): Add mep.
- (TARGET_CPU_CFILES): Add tc-mep.c.
- (TARGET_CPU_HFILES): Add tc-mep.h.
- (DEPTC_mep_elf): New variable.
- (DEPTC_mep_coff): Likewise.
- (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
- * configure.in: Support mep.
- * configure.tgt: Likewise.
- * config/tc-mep.c: New file.
- * config/obj-elf.c: New file.
- * config/tc-mep.c: New file.
- * config/tc-mep.h: New file.
- * testsuite/gas/mep: New testsuite with content.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
-
-2007-02-05 Dave Brolley <brolley@redhat.com>
-
- * cgen.c (gas_cgen_install_complex_reloc): Removed.
- (complex_reloc_installation_howto): Removed.
-
-2007-02-05 Dave Brolley <brolley@redhat.com>
- Graydon Hoare <graydon@redhat.com>
- DJ Delorie <dj@redhat.com>
- Catherine Moore <clm@redhat.com>
- Michael Chastain <chastain@redhat.com>
- Frank Ch. Eigler <fche@redhat.com>
-
- * symbols.c (use_complex_relocs_for): New, to decide
- when to use complex relocs. Add signed RELC support.
- (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
- encode expression symbols as mangled complex relocation symbols (when
- compiled with -DOBJ_COMPLEX_RELOC).
- (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
- * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
- encode_addend with new args. Modify to get start, length from
- ifield whenever it is set. Also change condition on which
- self-describing relocs are encoded. Add hook into
- gas_cgen_encode_addend.
- (queue_fixup_recursively): Add signed RELC support. Change from masked
- expr to trunc flag. Restore assignment of sub-field value to
- temporary in fixups array. Reflect changed meaning of last arg to
- queue_fixup_recursively.
- (fixup): Add cgen_maybe_multi_ifield member.
- (make_right_shifted_expr): New function.
- (queue_fixup): Change to recursive function that fragments
- fixups if operand has a multi-ifield.
- (gas_cgen_parse_operand): Add RELC code to wrap expressions in
- symbols, call weak_operand_overflow_check, and fragment call
- queue_fixup with operand fields.
- (gas_cgen_finish_insn) Modify to manage ifield pointer.
- (weak_operand_overflow_check): New function to try to select
- insns correctly.
- (gas_cgen_encode_addend): New function for relc.
- (gas_cgen_install_complex_reloc): Likewise.
- (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
- * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
- cgen_maybe_multi_ifield field to fx_cgen substructure.
- * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
- * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
-
-2007-02-03 DJ Delorie <dj@delorie.com>
-
- * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
- byte relocs.
- * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
- (m32c_cons_fix_new): Prototype.
-
-2007-02-02 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
- (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
-
-2007-02-02 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
- (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
- (map_suffix_reloc_to_operator): New.
- (map_operator_to_reloc): New.
- (expression_maybe_register): Fix incorrect test of return value from
- xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
- (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
-
-2007-02-02 Bob Wilson <bob.wilson@acm.org>
-
- * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
- (tinsn_get_tok): Delete prototype.
- * config/tc-xtensa.c (tinsn_get_tok): Delete.
-
-2007-02-02 Bob Wilson <bob.wilson@acm.org>
-
- * config/xtensa-relax.h (struct build_instr): Delete id field.
- * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
- and LABEL tokens.
- (append_literal_op, append_label_op): Remove litnum/labnum arguments;
- set op_data fields to zero.
- (parse_id_constant): Delete.
- (build_transition): Remove code to handle numbered literals and labels.
-
-2007-02-02 Bob Wilson <bob.wilson@acm.org>
-
- * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
- (build_transition_table): Likewise.
-
-2007-02-01 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
- fx_tcbit.
- * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
-
-2007-02-02 Alan Modra <amodra@bigpond.net.au>
-
- * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
- (struct fix <fx_plt>): Rename to tcbit2.
- * write.c (fix_new_internal): Adjust.
- (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
- * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
- * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
- * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
- * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
- * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
- * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
- * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
- * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
- * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
- * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
- Instead, compare fx_r_type.
- * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
- fx_tcbit in place of fx_plt.
- * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
- * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
- to fx_plt.
-
-2007-01-30 Nick Clifton <nickc@redhat.com>
-
- * as.c (main): Mark symbols created via the --defsym command line
- option as volatile so that they can be overridden later on by a
- .set directive. This maintains compatibility with the behaviour
- of earlier versions of the assembler.
- * doc/as.texinfo (--defsym): Document that the defined symbol's
- value can be overridden via a .set directive.
-
-2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (swap_imm_operands): Renamed to ...
- (swap_2_operands): This. Take 2 ints.
- (md_assemble): Updated.
- (swap_operands): Call swap_2_operands to swap 2 operands.
-
-2007-01-24 DJ Delorie <dj@redhat.com>
-
- * config/tc-m32c.c (md_pseudo_table): Add .3byte.
-
-2007-01-22 Nick Clifton <nickc@redhat.com>
-
- PR gas/3871
- * tc-score.c: Remove unnecessary uses of _().
- Make the err_msg[] a file level local array in order to save
- storage space.
- Remove unnecessary sprintf()s.
-
-2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
-
- PR gas/3871
- * config/tc-score.c : Using _() for const string.
- Do not assign inst.error with a local string pointer.
- (md_section_align): Pad section.
-
-2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Check number of operands
- when procssing memory/register operand.
-
-2007-01-12 Nick Clifton <nickc@redhat.com>
-
- PR gas/3856
- * macro.c (expand_irp): Do not ignore spaces inside quoted
- strings.
-
-2007-01-12 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
- * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
- * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
- (TC_FORCE_RELOCATION): Define.
- (TC_FORCE_RELOCATION_LOCAL): Define.
- * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
-
-2007-01-12 Alan Modra <amodra@bigpond.net.au>
-
- * input-file.c (input_file_open): Check fgets return.
-
-2007-01-11 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
-
-2007-01-11 Nick Clifton <nickc@redhat.com>
-
- PR gas/3707
- * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
- variable.
-
- * config/tc-mcore.c (md_number_to_chars): Use
- number_to_chars_{big|little}endian.
-
-2007-01-08 Kazu Hirata <kazu@codesourcery.com>
-
- * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
- architecture by itself.
- (m68k_ip): Don't issue a warning for tbl instructions on fido.
- (m68k_elf_final_processing): Treat Fido as an architecture by
- itself.
-
-2007-01-08 Kai Tietz <kai.tietz@onevision.com>
-
- * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
-
-2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
- depending on allow_naked_reg.
-
-2007-01-04 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
-
-2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/3830
- * config/tc-i386.c (register_prefix): New.
- (set_intel_syntax): Set set_intel_syntax to "" if register
- prefix isn't needed.
- (check_byte_reg): Use register_prefix for error message.
- (check_long_reg): Likewise.
- (check_qword_reg): Likewise.
- (check_word_reg): Likewise.
-
-2007-01-04 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
- (do_neon_qshl_imm): Likewise.
- (do_neon_rshl): New function. Handle rounding variants of
- v{q}shl-by-register.
- (insns): Use do_neon_rshl for vrshl, vqrshl.
-
-2007-01-04 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
- and vacle.
-
-2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (swap_operands): Remove branches.
-
-2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c: Update copyright year.
- * config/tc-i386.h: Likewise.
-
-2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (smallest_imm_type): Return unsigned int
- instead of int.
-
-2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
+ PR gas/5534
+ * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
+ Check memory size in Intel mode.
+ (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
+ (intel_e09): Likewise.
- * config/tc-i386.c: Convert to ISO C90 formatting
- * config/tc-i386.h: Likewise.
+ * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
-2007-01-03 David Daney <ddaney@avtrex.com>
+2008-01-02 Catherine Moore <clm@codesourcery.com>
- * config/tc-mips.c (md_show_usage): Clean up -mno-shared
- documentation.
+ * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
-For older changes see ChangeLog-2006
+For older changes see ChangeLog-2007
\f
Local Variables:
mode: change-log
projects / deliverable / binutils-gdb.git / blobdiff