and AT&T mnemonic vs. Intel mnemonic.
2007-12-20 Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (xtensa_elf_cons): Set frag flags for
expressions without suffixes.
(get_frag_property_flags): Preserve is_no_transform flag for frags
not marked as either instructions or literals.
-
+
2007-12-17 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (output_insn): Use ARRAY_SIZE.
2007-12-11 Sterling Augustine <sterling@tensilica.com>
Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (frag_format_size): Handle frags that expand to
wide branches.
(get_aligned_diff): For RELAX_ALIGN_NEXT_OPCODE, skip to the next
nop sequence is needed. Use md_number_to_chars and mips16_nop_insn.
2007-12-07 Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (O_pcrel): Define.
(suffix_relocs): Add pcrel suffix.
(md_pseudo_table): Add 4byte and 2byte directives.
(xg_valid_literal_expression): Allow O_pcrel.
(md_pcrel_from, md_apply_fix): Handle BFD_RELOC_32_PCREL.
(tc_gen_reloc): Fix punctuation in error message.
-
+
2007-12-06 Bob Wilson <bob.wilson@acm.org>
* config/tc-xtensa.c (xg_force_frag_space): Delete.
name and bracket.
2007-11-30 Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.h (md_allow_eh_opt): Define.
2007-11-29 Mark Shinwell <shinwell@codesourcery.com>
(xg_assemble_vliw_tokens): Update the code to select the "best" line
number to use new information. Call dwarf2_gen_line_info instead
of dwarf2_emit_insn.
-
+
2007-11-19 Bob Wilson <bob.wilson@acm.org>
-
+
* dwarf2dbg.h (dwarf2_loc_directive_seen): New.
* dwarf2dbg.c (loc_directive_seen): Make external and rename to...
(dwarf2_loc_directive_seen): ...this.
(dwarf2_emit_insn, dwarf2_consume_line_info)
(dwarf2_emit_label, dwarf2_directive_loc): Use new name.
-
+
2007-11-19 Bob Wilson <bob.wilson@acm.org>
-
+
* dwarf2dbg.c (dwarf2_emit_label): Use dwarf2_consume_line_info.
-
+
2007-11-19 Bob Wilson <bob.wilson@acm.org>
-
+
* dwarf2dbg.c (dwarf2_consume_line_info): New.
(dwarf2_emit_insn): Use it here.
(dwarf2_directive_loc): Fix check for consecutive .loc directives
* dwarf2dbg.h (dwarf2_consume_line_info): New prototype.
* config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info.
(md_assemble): Likewise.
-
+
2007-11-17 Thiemo Seufer <ths@mips.com>
* config/tc-mips.c (md_parse_option): Match mips_optimize to the -O
* config/tc-i386.c (process_suffix): Check addrprefixop0 to
see if the address size override prefix changes the size of the
- first operand.
+ first operand.
(check_byte_reg): Don't warn if byteokintel is set.
(check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword
is set.
* po/gas.pot: Regenerate.
2007-10-16 Bob Wilson <bob.wilson@acm.org>
-
+
* doc/as.texinfo (Overview): Add Xtensa --rename-section option.
-
+
2007-10-16 Nick Clifton <nickc@redhat.com>
* config/obj-elf.c (obj_elf_type): Accept "common" as a valid
PR gas/5133
* config/tc-arm.c (md_apply_fix): Correct error message.
- PR gas/5134
+ PR gas/5134
* config/tc-arm.c (md_apply_fix): Likewise.
PR gas/5136
* config/tc-bfin.c (md_apply_fix): Fix error message.
2007-10-03 Nick Clifton <nickc@redhat.com>
- * config/tc-avr.c (avr_get_constant):
+ * config/tc-avr.c (avr_get_constant):
PR gas/5089
* config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
PR gas/5090
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* config/tc-mips.c (s_align): Set max_alignment to 28.
-
+
2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
PR 658
Tony Linthicum <tony.linthicum@amd.com>
* NEWS: Add SSE5 support to NEWS file.
-
+
* config/tc-i386.h (drex_byte): Add fields to allow process_drex
and build_modrm_byte to communicate.
(DREX_OC0): New SSE5 macro.
macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
- config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
+ config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
-
+
* flonum-mult.c: Likewise, and also correct typo referring to
non-existant GNU Assembler General Public License.
* config/tc-m68851.h: Likewise.
* Makefile.in: Regenerate.
* config/tc-cr16.h: New file
* config/tc-cr16.c: New file
- * doc/c-cr16.texi: New file for cr16
- * doc/all.texi: Entry for cr16
+ * doc/c-cr16.texi: New file for cr16
+ * doc/all.texi: Entry for cr16
* doc/Makefile.am: Added c-cr16.texi
- * doc/Makefile.in: Regenerate
+ * doc/Makefile.in: Regenerate
* doc/as.texinfo: Entry for CR16 target
* NEWS: Announce the support for the new target.
* config/xtensa-relax.c (widen_spec_list): Add transitions from
wide branches to branch-over-jumps.
(build_transition): Handle wide branches in transition patterns.
-
+
2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (disp_size): New.
2007-06-11 Sterling Augustine <sterling@tensilica.com>
Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
(XTENSA_PROP_NO_TRANSFORM): ...this.
(frag_flags_struct): Move is_no_transform out of the insn sub-struct.
(xtensa_frag_flags_combinable): Likewise.
(frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
* config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
-
+
2007-06-06 Paul Brook <paul@codesourcery.com>
* config/tc-arm.c (s_align): Pad code sections appropriately.
* doc/Makefile.in: Regenerate.
2007-05-22 Bob Wilson <bob.wilson@acm.org>
-
+
* doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
and index entries about automatic alignment of ENTRY instructions.
-
+
2007-05-22 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo: Use @copying around the copyright notice.
PR gas/4517
2003-06-05 Michal Ludvig <mludvig@suse.cz>
- * doc/as.texinfo: Document new directives: .cfi_restore,
- .cfi_undefined, .cfi_same_value, .cfi_return_column,
+ * doc/as.texinfo: Document new directives: .cfi_restore,
+ .cfi_undefined, .cfi_same_value, .cfi_return_column,
.cfi_remember_state and .cfi_restore_state.
2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
* app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
-2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
+2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
PR gas/3041
* config/tc-m68k.c (relaxable_symbol): Make sure that the correct
addri, addri.c, subi, and subi.c when immediate number is hex.
(score_insns): Remove subis and subis.c.
(do_sub_rdi16): Delete.
-
+
2007-05-11 Alan Modra <amodra@bigpond.net.au>
* config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
(TC_FORCE_RELOCATION): Don't resolve them either.
2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
-
+
* config/tc-arm.c (md_apply_fix): Generate more accurate
diagnostic when 8-bit immediate range is exceeded for
BFD_RELOC_ARM_OFFSET_IMM8.
(xtensa_frob_label): Adjust calls to xtensa_move_labels.
(xg_assemble_vliw_tokens): Likewise. Also avoid calling
xtensa_move_labels for alignment of loop opcodes.
-
+
2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_suffix): Reindent a bit.
* NEWS: Mention ".reloc".
2007-03-26 Sterling Augustine <sterling@tensilica.com>
-
+
* config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
in FLIX instructions.
-
+
2007-03-26 Julian Brown <julian@codesourcery.com>
* config/tc-arm.c (arm_it): Add immisfloat field.
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
+ * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
i386_regtab.
(parse_register): Use i386_regtab_size instead of ARRAY_SIZE
on i386_regtab.
cgen_maybe_multi_ifield field to fx_cgen substructure.
* cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
* symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
-
+
2007-02-03 DJ Delorie <dj@delorie.com>
* config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
(m32c_cons_fix_new): Prototype.
2007-02-02 Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
(xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
-
+
2007-02-02 Bob Wilson <bob.wilson@acm.org>
* config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
* config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
(tinsn_get_tok): Delete prototype.
* config/tc-xtensa.c (tinsn_get_tok): Delete.
-
+
2007-02-02 Bob Wilson <bob.wilson@acm.org>
* config/xtensa-relax.h (struct build_instr): Delete id field.
* config/tc-score.c : Using _() for const string.
Do not assign inst.error with a local string pointer.
(md_section_align): Pad section.
-
+
2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_modrm_byte): Check number of operands
For older changes see ChangeLog-2006
\f
+Copyright (C) 2006 Free Software Foundation, Inc.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.
+
Local Variables:
mode: change-log
left-margin: 8
projects / deliverable / binutils-gdb.git / blobdiff