/* tc-xtensa.c -- Assemble Xtensa instructions.
- Copyright 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+ Copyright (C) 2003-2014 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
MA 02110-1301, USA. */
-#include <limits.h>
#include "as.h"
+#include <limits.h>
#include "sb.h"
#include "safe-ctype.h"
#include "tc-xtensa.h"
bfd_boolean density_supported = XCHAL_HAVE_DENSITY;
bfd_boolean absolute_literals_supported = XSHAL_USE_ABSOLUTE_LITERALS;
-/* Maximum width we would pad an unreachable frag to get alignment. */
-#define UNREACHABLE_MAX_WIDTH 8
-
static vliw_insn cur_vinsn;
+unsigned xtensa_num_pipe_stages;
unsigned xtensa_fetch_width = XCHAL_INST_FETCH_WIDTH;
static enum debug_info_type xt_saved_debug_type = DEBUG_NONE;
#define O_hi16 O_md2 /* use high 16 bits of symbolic value */
#define O_lo16 O_md3 /* use low 16 bits of symbolic value */
#define O_pcrel O_md4 /* value is a PC-relative offset */
+#define O_tlsfunc O_md5 /* TLS_FUNC/TLSDESC_FN relocation */
+#define O_tlsarg O_md6 /* TLS_ARG/TLSDESC_ARG relocation */
+#define O_tlscall O_md7 /* TLS_CALL relocation */
+#define O_tpoff O_md8 /* TPOFF relocation */
+#define O_dtpoff O_md9 /* DTPOFF relocation */
struct suffix_reloc_map
{
SUFFIX_MAP ("h", BFD_RELOC_HI16, O_hi16),
SUFFIX_MAP ("plt", BFD_RELOC_XTENSA_PLT, O_pltrel),
SUFFIX_MAP ("pcrel", BFD_RELOC_32_PCREL, O_pcrel),
+ SUFFIX_MAP ("tlsfunc", BFD_RELOC_XTENSA_TLS_FUNC, O_tlsfunc),
+ SUFFIX_MAP ("tlsarg", BFD_RELOC_XTENSA_TLS_ARG, O_tlsarg),
+ SUFFIX_MAP ("tlscall", BFD_RELOC_XTENSA_TLS_CALL, O_tlscall),
+ SUFFIX_MAP ("tpoff", BFD_RELOC_XTENSA_TLS_TPOFF, O_tpoff),
+ SUFFIX_MAP ("dtpoff", BFD_RELOC_XTENSA_TLS_DTPOFF, O_dtpoff),
{ (char *) 0, 0, BFD_RELOC_UNUSED, 0 }
};
static void xtensa_literal_pseudo (int);
static void xtensa_frequency_pseudo (int);
static void xtensa_elf_cons (int);
+static void xtensa_leb128 (int);
/* Parsing and Idiom Translation. */
/* Import from elf32-xtensa.c in BFD library. */
-extern asection *xtensa_get_property_section (asection *, const char *);
+extern asection *xtensa_make_property_section (asection *, const char *);
/* op_placement_info functions. */
/* vliw_insn functions. */
static void xg_init_vinsn (vliw_insn *);
+static void xg_copy_vinsn (vliw_insn *, vliw_insn *);
static void xg_clear_vinsn (vliw_insn *);
static bfd_boolean vinsn_has_specific_opcodes (vliw_insn *);
static void xg_free_vinsn (vliw_insn *);
static xtensa_opcode xtensa_movi_opcode;
static xtensa_opcode xtensa_movi_n_opcode;
static xtensa_opcode xtensa_isync_opcode;
+static xtensa_opcode xtensa_j_opcode;
static xtensa_opcode xtensa_jx_opcode;
static xtensa_opcode xtensa_l32r_opcode;
static xtensa_opcode xtensa_loop_opcode;
static xtensa_opcode xtensa_retw_n_opcode;
static xtensa_opcode xtensa_rsr_lcount_opcode;
static xtensa_opcode xtensa_waiti_opcode;
+static int config_max_slots = 0;
\f
/* Command-line Options. */
bfd_boolean use_literal_section = TRUE;
+enum flix_level produce_flix = FLIX_ALL;
static bfd_boolean align_targets = TRUE;
static bfd_boolean warn_unaligned_branch_targets = FALSE;
static bfd_boolean has_a0_b_retw = FALSE;
option_density = OPTION_MD_BASE,
option_no_density,
+ option_flix,
+ option_no_generate_flix,
+ option_no_flix,
+
option_relax,
option_no_relax,
{ "density", no_argument, NULL, option_density },
{ "no-density", no_argument, NULL, option_no_density },
+ { "flix", no_argument, NULL, option_flix },
+ { "no-generate-flix", no_argument, NULL, option_no_generate_flix },
+ { "no-allow-flix", no_argument, NULL, option_no_flix },
+
/* Both "relax" and "generics" are deprecated and treated as equivalent
to the "transform" option. */
{ "relax", no_argument, NULL, option_relax },
case option_no_link_relax:
linkrelax = 0;
return 1;
+ case option_flix:
+ produce_flix = FLIX_ALL;
+ return 1;
+ case option_no_generate_flix:
+ produce_flix = FLIX_NO_GENERATE;
+ return 1;
+ case option_no_flix:
+ produce_flix = FLIX_NONE;
+ return 1;
case option_generics:
as_warn (_("--generics is deprecated; use --transform instead"));
return md_parse_option (option_transform, arg);
--[no-]target-align [Do not] try to align branch targets\n\
--[no-]longcalls [Do not] emit 32-bit call sequences\n\
--[no-]transform [Do not] transform instructions\n\
+ --flix both allow hand-written and generate flix bundles\n\
+ --no-generate-flix allow hand-written but do not generate\n\
+ flix bundles\n\
+ --no-allow-flix neither allow hand-written nor generate\n\
+ flix bundles\n\
--rename-section old=new Rename section 'old' to 'new'\n", stream);
}
{ "4byte", xtensa_elf_cons, 4 },
{ "short", xtensa_elf_cons, 2 },
{ "2byte", xtensa_elf_cons, 2 },
+ { "sleb128", xtensa_leb128, 1},
+ { "uleb128", xtensa_leb128, 0},
{ "begin", xtensa_begin_directive, 0 },
{ "end", xtensa_end_directive, 0 },
{ "literal", xtensa_literal_pseudo, 0 },
{
/* After md_end, you should be checking frag by frag, rather
than state directives. */
- assert (!past_xtensa_end);
+ gas_assert (!past_xtensa_end);
return directive_state[directive_transform];
}
/* Do not use this function after md_end; just look at align_targets
instead. There is no target-align directive, so alignment is either
enabled for all frags or not done at all. */
- assert (!past_xtensa_end);
+ gas_assert (!past_xtensa_end);
return align_targets && use_transform ();
}
/* Allocate the literal state for this section and push
onto the directive stack. */
ls = xmalloc (sizeof (lit_state));
- assert (ls);
+ gas_assert (ls);
*ls = default_lit_sections;
directive_push (directive_literal_prefix, negated, ls);
md_flush_pending_output ();
- switch (end_directive)
+ switch ((int) end_directive)
{
- case (directiveE) XTENSA_UNDEFINED:
+ case XTENSA_UNDEFINED:
discard_rest_of_line ();
return;
- case directive_density:
+ case (int) directive_density:
as_warn (_(".end [no-]density is ignored"));
demand_empty_rest_of_line ();
break;
- case directive_absolute_literals:
+ case (int) directive_absolute_literals:
if (!absolute_literals_supported && !end_negated)
{
as_warn (_("Xtensa absolute literals option not supported; ignored"));
case directive_literal_prefix:
/* Restore the default collection sections from saved state. */
s = (lit_state *) state;
- assert (s);
+ gas_assert (s);
default_lit_sections = *s;
/* Free the state storage. */
if (use_literal_section || directive_state[directive_absolute_literals])
dest_seg = now_seg;
+ /* FIXME, despite the previous comments, dest_seg is unused... */
+ (void) dest_seg;
+
/* All literals are aligned to four-byte boundaries. */
frag_align (2, 0, 0);
record_alignment (now_seg, 2);
/* Get a null-terminated copy of the name. */
name = xmalloc (len + 1);
- assert (name);
+ gas_assert (name);
strncpy (name, input_line_pointer, len);
name[len] = 0;
else if (nbytes != (int) bfd_get_reloc_size (reloc_howto))
as_bad (_("%s relocations do not fit in %d bytes"),
reloc_howto->name, nbytes);
+ else if (reloc == BFD_RELOC_XTENSA_TLS_FUNC
+ || reloc == BFD_RELOC_XTENSA_TLS_ARG
+ || reloc == BFD_RELOC_XTENSA_TLS_CALL)
+ as_bad (_("invalid use of %s relocation"), reloc_howto->name);
else
{
char *p = frag_more ((int) nbytes);
}
}
else
- emit_expr (&exp, (unsigned int) nbytes);
+ {
+ xtensa_set_frag_assembly_state (frag_now);
+ emit_expr (&exp, (unsigned int) nbytes);
+ }
}
while (*input_line_pointer++ == ',');
demand_empty_rest_of_line ();
}
+static bfd_boolean is_leb128_expr;
+
+static void
+xtensa_leb128 (int sign)
+{
+ is_leb128_expr = TRUE;
+ s_leb128 (sign);
+ is_leb128_expr = FALSE;
+}
+
\f
/* Parsing and Idiom Translation. */
break;
}
}
- assert (operator != (unsigned char) -1);
+ gas_assert (operator != (unsigned char) -1);
return operator;
}
/* Find the matching reloc type. */
static bfd_reloc_code_real_type
-map_operator_to_reloc (unsigned char operator)
+map_operator_to_reloc (unsigned char operator, bfd_boolean is_literal)
{
struct suffix_reloc_map *sfx;
bfd_reloc_code_real_type reloc = BFD_RELOC_UNUSED;
}
}
+ if (is_literal)
+ {
+ if (reloc == BFD_RELOC_XTENSA_TLS_FUNC)
+ return BFD_RELOC_XTENSA_TLSDESC_FN;
+ else if (reloc == BFD_RELOC_XTENSA_TLS_ARG)
+ return BFD_RELOC_XTENSA_TLSDESC_ARG;
+ }
+
if (reloc == BFD_RELOC_UNUSED)
return BFD_RELOC_32;
{
bfd_reloc_code_real_type reloc;
segT t = expression (tok);
+
if (t == absolute_section
&& xtensa_operand_is_PCrelative (isa, opc, opnd) == 1)
{
- assert (tok->X_op == O_constant);
+ gas_assert (tok->X_op == O_constant);
tok->X_op = O_symbol;
tok->X_add_symbol = &abs_symbol;
}
input_line_pointer++;
if (num_regs == 0)
goto err;
- assert (opnd_cnt > 0);
+ gas_assert (opnd_cnt > 0);
num_regs--;
opnd_rf = xtensa_operand_regfile (isa, opcode, last_opnd_cnt);
if (next_reg
as_warn (_("too many arguments"));
goto err;
}
- assert (opnd_cnt < MAX_INSN_ARGS);
+ gas_assert (opnd_cnt < MAX_INSN_ARGS);
expression_maybe_register (opcode, opnd_cnt, tok);
next_reg = tok->X_add_number + 1;
last_tok = tok;
last_opnd_cnt = opnd_cnt;
+ demand_empty_rest_of_line ();
do
{
offsetT val;
opname = *popname;
- assert (opname[0] != '_');
+ gas_assert (opname[0] != '_');
if (strcmp (opname, old_op) != 0)
return 0;
/* The routine xg_instruction_matches_option_term must return TRUE
when a given option term is true. The meaning of all of the option
- terms is given interpretation by this function. This is needed when
- an option depends on the state of a directive, but there are no such
- options in use right now. */
+ terms is given interpretation by this function. */
static bfd_boolean
-xg_instruction_matches_option_term (TInsn *insn ATTRIBUTE_UNUSED,
- const ReqOrOption *option)
+xg_instruction_matches_option_term (TInsn *insn, const ReqOrOption *option)
{
if (strcmp (option->option_name, "realnop") == 0
|| strncmp (option->option_name, "IsaUse", 6) == 0)
relaxation table. There's no need to reevaluate them now. */
return TRUE;
}
+ else if (strcmp (option->option_name, "FREEREG") == 0)
+ return insn->extra_arg.X_op == O_register;
else
{
as_fatal (_("internal error: unknown option name '%s'"),
{
case OP_CONSTANT:
/* The expression must be the constant. */
- assert (cond->op_num < insn->ntok);
+ gas_assert (cond->op_num < insn->ntok);
exp1 = &insn->tok[cond->op_num];
if (expr_is_const (exp1))
{
break;
case OP_OPERAND:
- assert (cond->op_num < insn->ntok);
- assert (cond->op_data < insn->ntok);
+ gas_assert (cond->op_num < insn->ntok);
+ gas_assert (cond->op_data < insn->ntok);
exp1 = &insn->tok[cond->op_num];
exp2 = &insn->tok[cond->op_data];
{
TransitionTable *table = xg_build_simplify_table (&transition_rule_cmp);
TransitionList *l;
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->opcode < table->num_opcodes);
/* Walk through all of the possible transitions. */
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
TransitionList *l;
TransitionRule *match = 0;
- assert (insn->insn_type == ITYPE_INSN);
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->opcode < table->num_opcodes);
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
{
TransitionList *l;
int max_size = xg_get_single_size (opcode);
- assert (opcode < table->num_opcodes);
+ gas_assert (opcode < table->num_opcodes);
for (l = table->table[opcode]; l != NULL; l = l->next)
{
build_list = rule->to_instr;
if (is_unique_insn_expansion (rule))
{
- assert (build_list->typ == INSTR_INSTR);
+ gas_assert (build_list->typ == INSTR_INSTR);
this_size = xg_get_max_insn_widen_size (build_list->opcode);
}
else
TransitionList *l;
int max_size = 0;
- assert (opcode < table->num_opcodes);
+ gas_assert (opcode < table->num_opcodes);
for (l = table->table[opcode]; l != NULL; l = l->next)
{
build_list = rule->to_instr;
if (is_unique_insn_expansion (rule))
{
- assert (build_list->typ == INSTR_INSTR);
+ gas_assert (build_list->typ == INSTR_INSTR);
this_size = xg_get_max_insn_widen_literal_size (build_list->opcode);
}
else
TransitionTable *table = xg_build_widen_table (&transition_rule_cmp);
TransitionList *l;
- assert (insn->insn_type == ITYPE_INSN);
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->opcode < table->num_opcodes);
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
{
case O_subtract:
case O_pltrel:
case O_pcrel:
+ case O_tlsfunc:
+ case O_tlsarg:
+ case O_tpoff:
+ case O_dtpoff:
return TRUE;
default:
return FALSE;
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
- const expressionS *expr = &insn->tok[i];
+ const expressionS *exp = &insn->tok[i];
+
if (xtensa_operand_is_register (isa, insn->opcode, i) == 1)
continue;
- switch (expr->X_op)
+ switch (exp->X_op)
{
case O_register:
case O_constant:
- if (xg_check_operand (expr->X_add_number, insn->opcode, i))
+ if (xg_check_operand (exp->X_add_number, insn->opcode, i))
return FALSE;
break;
default:
/* The symbol should have a fixup associated with it. */
- assert (FALSE);
+ gas_assert (FALSE);
break;
}
}
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
- const expressionS *expr = &insn->tok[i];
+ const expressionS *exp = &insn->tok[i];
+
if (xtensa_operand_is_register (isa, insn->opcode, i) == 1)
continue;
- switch (expr->X_op)
+ switch (exp->X_op)
{
case O_register:
case O_constant:
- if (xg_check_operand (expr->X_add_number, insn->opcode, i))
+ if (xg_check_operand (exp->X_add_number, insn->opcode, i))
return FALSE;
break;
/* If it is a weak symbol or a symbol in a different section,
it cannot be known to fit at assembly time. */
- if (S_IS_WEAK (expr->X_add_symbol)
- || S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
+ if (S_IS_WEAK (exp->X_add_symbol)
+ || S_GET_SEGMENT (exp->X_add_symbol) != pc_seg)
{
/* For a direct call with --no-longcalls, be optimistic and
assume it will be in range. If the symbol is weak and
symbols even if longcalls is not enabled. */
if (is_direct_call_opcode (insn->opcode)
&& ! pc_frag->tc_frag_data.use_longcalls
- && (! S_IS_WEAK (expr->X_add_symbol)
- || S_IS_DEFINED (expr->X_add_symbol)))
+ && (! S_IS_WEAK (exp->X_add_symbol)
+ || S_IS_DEFINED (exp->X_add_symbol)))
return TRUE;
return FALSE;
}
- symbolP = expr->X_add_symbol;
+ symbolP = exp->X_add_symbol;
sym_frag = symbol_get_frag (symbolP);
- target = S_GET_VALUE (symbolP) + expr->X_add_number;
+ target = S_GET_VALUE (symbolP) + exp->X_add_number;
pc = pc_frag->fr_address + pc_offset;
/* If frag has yet to be reached on this pass, assume it
int op_num = op->op_num;
int op_data = op->op_data;
- assert (op->op_num < MAX_INSN_ARGS);
+ gas_assert (op->op_num < MAX_INSN_ARGS);
if (targ->ntok <= op_num)
targ->ntok = op_num + 1;
set_expr_const (&targ->tok[op_num], op_data);
break;
case OP_OPERAND:
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
copy_expr (&targ->tok[op_num], &insn->tok[op_data]);
break;
+ case OP_FREEREG:
+ if (insn->extra_arg.X_op != O_register)
+ return FALSE;
+ copy_expr (&targ->tok[op_num], &insn->extra_arg);
+ break;
case OP_LITERAL:
sym = get_special_literal_symbol ();
set_expr_symbol_offset (&targ->tok[op_num], sym, 0);
+ if (insn->tok[op_data].X_op == O_tlsfunc
+ || insn->tok[op_data].X_op == O_tlsarg)
+ copy_expr (&targ->extra_arg, &insn->tok[op_data]);
break;
case OP_LABEL:
sym = get_special_label_symbol ();
break;
case OP_OPERAND_HI16U:
case OP_OPERAND_LOW16U:
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
if (expr_is_const (&insn->tok[op_data]))
{
long val;
if (targ->opcode == XTENSA_UNDEFINED
|| (targ->opcode != xtensa_const16_opcode))
return FALSE;
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
/* Need to build a O_lo16 or O_hi16. */
copy_expr (&targ->tok[op_num], &insn->tok[op_data]);
if (targ->tok[op_num].X_op == O_symbol)
OP_OPERAND_F32MINUS */
if (xg_has_userdef_op_fn (op->typ))
{
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
if (expr_is_const (&insn->tok[op_data]))
{
long val;
return FALSE; /* We cannot use a relocation for this. */
break;
}
- assert (0);
+ gas_assert (0);
break;
}
}
{
int op_num = op->op_num;
int op_data = op->op_data;
- assert (op->op_num < MAX_INSN_ARGS);
+ gas_assert (op->op_num < MAX_INSN_ARGS);
if (targ->ntok <= op_num)
targ->ntok = op_num + 1;
switch (op->typ)
{
case OP_OPERAND:
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
/* We can only pass resolvable literals through. */
if (!xg_valid_literal_expression (&insn->tok[op_data]))
return FALSE;
case OP_CONSTANT:
case OP_LABEL:
default:
- assert (0);
+ gas_assert (0);
break;
}
}
targ->insn_type = ITYPE_LABEL;
targ->is_specific_opcode = FALSE;
/* Literal with no ops is a label? */
- assert (op == NULL);
+ gas_assert (op == NULL);
break;
default:
- assert (0);
+ gas_assert (0);
}
return TRUE;
TransitionTable *table = xg_build_widen_table (&transition_rule_cmp);
TransitionList *l;
- assert (insn->insn_type == ITYPE_INSN);
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->opcode < table->num_opcodes);
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
{
/* Check to see if it fits. */
for (i = stack_size; i < istack->ninsn; i++)
{
- TInsn *insn = &istack->insn[i];
+ TInsn *tinsn = &istack->insn[i];
- if (insn->insn_type == ITYPE_INSN
- && !tinsn_has_symbolic_operands (insn)
- && !xg_immeds_fit (insn))
+ if (tinsn->insn_type == ITYPE_INSN
+ && !tinsn_has_symbolic_operands (tinsn)
+ && !xg_immeds_fit (tinsn))
{
istack->ninsn = stack_size;
return FALSE;
xtensa_set_frag_assembly_state (frag_now);
/* Just to make sure that we did not split it up. */
- assert (old_frag->fr_next == frag_now);
+ gas_assert (old_frag->fr_next == frag_now);
}
{
case OP_CONSTANT:
/* The expression must be the constant. */
- assert (b_op->op_num < MAX_INSN_ARGS);
+ gas_assert (b_op->op_num < MAX_INSN_ARGS);
exp = &new_insn->tok[b_op->op_num];
set_expr_const (exp, b_op->op_data);
break;
case OP_OPERAND:
- assert (b_op->op_num < MAX_INSN_ARGS);
- assert (b_op->op_data < (unsigned) old_insn->ntok);
+ gas_assert (b_op->op_num < MAX_INSN_ARGS);
+ gas_assert (b_op->op_data < (unsigned) old_insn->ntok);
src_exp = &old_insn->tok[b_op->op_data];
exp = &new_insn->tok[b_op->op_num];
copy_expr (exp, src_exp);
case OP_LITERAL:
case OP_LABEL:
as_bad (_("can't handle generation of literal/labels yet"));
- assert (0);
+ gas_assert (0);
default:
as_bad (_("can't handle undefined OP TYPE"));
- assert (0);
+ gas_assert (0);
}
}
insn_spec = rule->to_instr;
/* There should only be one. */
- assert (insn_spec != NULL);
- assert (insn_spec->next == NULL);
+ gas_assert (insn_spec != NULL);
+ gas_assert (insn_spec->next == NULL);
if (insn_spec->next != NULL)
return FALSE;
set_expr_symbol_offset (&saved_loc, frag_now->fr_symbol, frag_now_fix ());
- assert (insn->insn_type == ITYPE_LITERAL);
- assert (insn->ntok == 1); /* must be only one token here */
+ gas_assert (insn->insn_type == ITYPE_LITERAL);
+ gas_assert (insn->ntok == 1); /* must be only one token here */
xtensa_switch_to_literal_fragment (&state);
pcrel = TRUE;
/* fall through */
case O_pltrel:
+ case O_tlsfunc:
+ case O_tlsarg:
+ case O_tpoff:
+ case O_dtpoff:
p = frag_more (litsize);
xtensa_set_frag_assembly_state (frag_now);
- reloc = map_operator_to_reloc (emit_val->X_op);
+ reloc = map_operator_to_reloc (emit_val->X_op, TRUE);
if (emit_val->X_add_symbol)
emit_val->X_op = O_symbol;
else
break;
}
- assert (frag_now->tc_frag_data.literal_frag == NULL);
+ gas_assert (frag_now->tc_frag_data.literal_frag == NULL);
frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg);
frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now);
lit_sym = frag_now->fr_symbol;
offsetT litalign = 2; /* 2^2 = 4 */
fragS *lit_saved_frag;
- assert (size % 4 == 0);
+ gas_assert (size % 4 == 0);
xtensa_switch_to_literal_fragment (&state);
int opnum,
xtensa_format fmt,
int slot,
- expressionS *expr,
+ expressionS *exp,
fragS *fragP,
offsetT offset)
{
}
else if (opcode == xtensa_const16_opcode)
{
- if (expr->X_op == O_lo16)
+ if (exp->X_op == O_lo16)
{
reloc = encode_reloc (slot);
- expr->X_op = O_symbol;
+ exp->X_op = O_symbol;
}
- else if (expr->X_op == O_hi16)
+ else if (exp->X_op == O_hi16)
{
reloc = encode_alt_reloc (slot);
- expr->X_op = O_symbol;
+ exp->X_op = O_symbol;
}
}
/* Handle erroneous "@h" and "@l" expressions here before they propagate
into the symbol table where the generic portions of the assembler
won't know what to do with them. */
- if (expr->X_op == O_lo16 || expr->X_op == O_hi16)
+ if (exp->X_op == O_lo16 || exp->X_op == O_hi16)
{
as_bad (_("invalid expression for operand %i of '%s'"),
opnum + 1, xtensa_opcode_name (xtensa_default_isa, opcode));
}
fmt_length = xtensa_format_length (xtensa_default_isa, fmt);
- the_fix = fix_new_exp (fragP, offset, fmt_length, expr,
+ the_fix = fix_new_exp (fragP, offset, fmt_length, exp,
howto->pc_relative, reloc);
the_fix->fx_no_overflow = 1;
- the_fix->tc_fix_data.X_add_symbol = expr->X_add_symbol;
- the_fix->tc_fix_data.X_add_number = expr->X_add_number;
+ the_fix->tc_fix_data.X_add_symbol = exp->X_add_symbol;
+ the_fix->tc_fix_data.X_add_number = exp->X_add_number;
the_fix->tc_fix_data.slot = slot;
return TRUE;
int i;
if (lit_sym == 0)
return;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < insn->ntok; i++)
if (insn->tok[i].X_add_symbol == sym)
insn->tok[i].X_add_symbol = lit_sym;
be accompanied by major changes to make use of that data.
In any event, we can tell that we are expanding from a single-slot
- three-byte format to a wider one with the logic below. */
+ format to a wider one with the logic below. */
- if (fmt_size <= 3 && fragP->tc_frag_data.text_expansion[0] != 3)
- return 3 + fragP->tc_frag_data.text_expansion[0];
- else
- return 3;
+ int i;
+ int relaxed_size = fmt_size + fragP->tc_frag_data.text_expansion[0];
+
+ for (i = 0; i < xtensa_isa_num_formats (isa); i++)
+ {
+ if (relaxed_size == xtensa_format_length (isa, i))
+ return relaxed_size;
+ }
+
+ return 3;
}
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
|| next_fragP->fr_subtype == RELAX_UNREACHABLE)))
next_fragP = next_fragP->fr_next;
- assert (next_fragP->fr_type == rs_machine_dependent
+ gas_assert (next_fragP->fr_type == rs_machine_dependent
&& (next_fragP->fr_subtype == RELAX_MAYBE_UNREACHABLE
|| next_fragP->fr_subtype == RELAX_UNREACHABLE));
|| new_target->fr_subtype == RELAX_DESIRE_ALIGN)))
new_target = new_target->fr_next;
- assert (new_target->fr_type == rs_machine_dependent
+ gas_assert (new_target->fr_type == rs_machine_dependent
&& (new_target->fr_subtype == RELAX_MAYBE_DESIRE_ALIGN
|| new_target->fr_subtype == RELAX_DESIRE_ALIGN));
}
}
+/* As specified in the relaxation table, when a loop instruction is
+ relaxed, there are 24 bytes between the loop instruction itself and
+ the first instruction in the loop. */
+
+#define RELAXED_LOOP_INSN_BYTES 24
+
static addressT
next_frag_pre_opcode_bytes (const fragS *fragp)
{
been relaxed. Note that we can assume that the LOOP
instruction is in slot 0 because loops aren't bundleable. */
if (next_fragp->tc_frag_data.slot_subtypes[0] > RELAX_IMMED)
- return get_expanded_loop_offset (next_opcode);
+ return get_expanded_loop_offset (next_opcode) + RELAXED_LOOP_INSN_BYTES;
return 0;
}
else
tinsn->opcode = xtensa_nop_opcode;
- assert (tinsn->opcode != XTENSA_UNDEFINED);
+ gas_assert (tinsn->opcode != XTENSA_UNDEFINED);
}
}
/* This is the OFFSET of the loop instruction in the expanded loop.
This MUST correspond directly to the specification of the loop
expansion. It will be validated on fragment conversion. */
- assert (opcode != XTENSA_UNDEFINED);
+ gas_assert (opcode != XTENSA_UNDEFINED);
if (opcode == xtensa_loop_opcode)
return 0;
if (opcode == xtensa_loopnez_opcode)
addressT frag_addr;
xtensa_format fmt;
- xtensa_insnbuf_from_chars
- (isa, insnbuf, (unsigned char *) frag->fr_literal, 0);
- fmt = xtensa_format_decode (isa, insnbuf);
- op_size = xtensa_format_length (isa, fmt);
- frag_addr = frag->fr_address % xtensa_fetch_width;
-
- if (frag_addr + op_size > xtensa_fetch_width)
- as_warn_where (frag->fr_file, frag->fr_line,
- _("unaligned loop: %d bytes at 0x%lx"),
- op_size, (long) frag->fr_address);
+ if (frag->fr_fix == 0)
+ frag = next_non_empty_frag (frag);
+
+ if (frag)
+ {
+ xtensa_insnbuf_from_chars
+ (isa, insnbuf, (unsigned char *) frag->fr_literal, 0);
+ fmt = xtensa_format_decode (isa, insnbuf);
+ op_size = xtensa_format_length (isa, fmt);
+ frag_addr = frag->fr_address % xtensa_fetch_width;
+
+ if (frag_addr + op_size > xtensa_fetch_width)
+ as_warn_where (frag->fr_file, frag->fr_line,
+ _("unaligned loop: %d bytes at 0x%lx"),
+ op_size, (long) frag->fr_address);
+ }
}
frag = frag->fr_next;
}
xtensa_opcode opcode;
char *const fixpos = fixP->fx_frag->fr_literal + fixP->fx_where;
- (void) decode_reloc (fixP->fx_r_type, &slot, &alt_reloc);
- if (alt_reloc)
+ if (decode_reloc (fixP->fx_r_type, &slot, &alt_reloc)
+ || alt_reloc)
as_fatal (_("unexpected fix"));
if (!insnbuf)
segT current_section = now_seg;
int current_subsec = now_subseg;
xtensa_isa isa;
+ int i;
xtensa_default_isa = xtensa_isa_init (0, 0);
isa = xtensa_default_isa;
subseg_set (current_section, current_subsec);
- xg_init_vinsn (&cur_vinsn);
-
xtensa_addi_opcode = xtensa_opcode_lookup (isa, "addi");
xtensa_addmi_opcode = xtensa_opcode_lookup (isa, "addmi");
xtensa_call0_opcode = xtensa_opcode_lookup (isa, "call0");
xtensa_movi_opcode = xtensa_opcode_lookup (isa, "movi");
xtensa_movi_n_opcode = xtensa_opcode_lookup (isa, "movi.n");
xtensa_isync_opcode = xtensa_opcode_lookup (isa, "isync");
+ xtensa_j_opcode = xtensa_opcode_lookup (isa, "j");
xtensa_jx_opcode = xtensa_opcode_lookup (isa, "jx");
xtensa_l32r_opcode = xtensa_opcode_lookup (isa, "l32r");
xtensa_loop_opcode = xtensa_opcode_lookup (isa, "loop");
xtensa_rsr_lcount_opcode = xtensa_opcode_lookup (isa, "rsr.lcount");
xtensa_waiti_opcode = xtensa_opcode_lookup (isa, "waiti");
+ for (i = 0; i < xtensa_isa_num_formats (isa); i++)
+ {
+ int format_slots = xtensa_format_num_slots (isa, i);
+ if (format_slots > config_max_slots)
+ config_max_slots = format_slots;
+ }
+
+ xg_init_vinsn (&cur_vinsn);
+
+ xtensa_num_pipe_stages = xtensa_isa_num_pipe_stages (isa);
+
init_op_placement_info_table ();
/* Set up the assembly state. */
/* No target aligning in the absolute section. */
if (now_seg != absolute_section
- && do_align_targets ()
&& !is_unaligned_label (sym)
&& !generating_literals)
{
xtensa_set_frag_assembly_state (frag_now);
- frag_var (rs_machine_dependent,
- 0, (int) freq,
- RELAX_DESIRE_ALIGN_IF_TARGET,
- frag_now->fr_symbol, frag_now->fr_offset, NULL);
+ if (do_align_targets ())
+ frag_var (rs_machine_dependent, 0, (int) freq,
+ RELAX_DESIRE_ALIGN_IF_TARGET, frag_now->fr_symbol,
+ frag_now->fr_offset, NULL);
+ else
+ frag_var (rs_fill, 0, 0, frag_now->fr_subtype,
+ frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
xtensa_move_labels (frag_now, 0);
}
orig_insn.insn_type = ITYPE_INSN;
orig_insn.ntok = 0;
orig_insn.is_specific_opcode = (has_underbar || !use_transform ());
-
orig_insn.opcode = xtensa_opcode_lookup (isa, opname);
+
+ /* Special case: Check for "CALLXn.TLS" psuedo op. If found, grab its
+ extra argument and set the opcode to "CALLXn". */
+ if (orig_insn.opcode == XTENSA_UNDEFINED
+ && strncasecmp (opname, "callx", 5) == 0)
+ {
+ unsigned long window_size;
+ char *suffix;
+
+ window_size = strtoul (opname + 5, &suffix, 10);
+ if (suffix != opname + 5
+ && (window_size == 0
+ || window_size == 4
+ || window_size == 8
+ || window_size == 12)
+ && strcasecmp (suffix, ".tls") == 0)
+ {
+ switch (window_size)
+ {
+ case 0: orig_insn.opcode = xtensa_callx0_opcode; break;
+ case 4: orig_insn.opcode = xtensa_callx4_opcode; break;
+ case 8: orig_insn.opcode = xtensa_callx8_opcode; break;
+ case 12: orig_insn.opcode = xtensa_callx12_opcode; break;
+ }
+
+ if (num_args != 2)
+ as_bad (_("wrong number of operands for '%s'"), opname);
+ else
+ {
+ bfd_reloc_code_real_type reloc;
+ char *old_input_line_pointer;
+ expressionS *tok = &orig_insn.extra_arg;
+
+ old_input_line_pointer = input_line_pointer;
+ input_line_pointer = arg_strings[num_args - 1];
+
+ expression (tok);
+ if (tok->X_op == O_symbol
+ && ((reloc = xtensa_elf_suffix (&input_line_pointer, tok))
+ == BFD_RELOC_XTENSA_TLS_CALL))
+ tok->X_op = map_suffix_reloc_to_operator (reloc);
+ else
+ as_bad (_("bad relocation expression for '%s'"), opname);
+
+ input_line_pointer = old_input_line_pointer;
+ num_args -= 1;
+ }
+ }
+ }
+
+ /* Special case: Check for "j.l" psuedo op. */
+ if (orig_insn.opcode == XTENSA_UNDEFINED
+ && strncasecmp (opname, "j.l", 3) == 0)
+ {
+ if (num_args != 2)
+ as_bad (_("wrong number of operands for '%s'"), opname);
+ else
+ {
+ char *old_input_line_pointer;
+ expressionS *tok = &orig_insn.extra_arg;
+
+ old_input_line_pointer = input_line_pointer;
+ input_line_pointer = arg_strings[num_args - 1];
+
+ expression_maybe_register (xtensa_jx_opcode, 0, tok);
+ input_line_pointer = old_input_line_pointer;
+
+ num_args -= 1;
+ orig_insn.opcode = xtensa_j_opcode;
+ }
+ }
+
if (orig_insn.opcode == XTENSA_UNDEFINED)
{
xtensa_format fmt = xtensa_format_lookup (isa, opname);
bfd_boolean
xtensa_fix_adjustable (fixS *fixP)
{
- /* An offset is not allowed in combination with the difference of two
- symbols, but that cannot be easily detected after a local symbol
- has been adjusted to a (section+offset) form. Return 0 so that such
- an fix will not be adjusted. */
- if (fixP->fx_subsy && fixP->fx_addsy && fixP->fx_offset
- && relaxable_section (S_GET_SEGMENT (fixP->fx_subsy)))
- return 0;
-
/* We need the symbol name for the VTABLE entries. */
if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
void
xtensa_symbol_new_hook (symbolS *sym)
{
- if (S_GET_SEGMENT (sym) == expr_section)
+ if (is_leb128_expr && S_GET_SEGMENT (sym) == expr_section)
{
symbol_get_tc (sym)->next_expr_symbol = expr_symbols;
expr_symbols = sym;
break;
}
- /* An offset is only allowed when it results from adjusting a
- local symbol into a section-relative offset. If the offset
- came from the original expression, tc_fix_adjustable will have
- prevented the fix from being converted to a section-relative
- form so that we can flag the error here. */
- if (fixP->fx_offset != 0 && !symbol_section_p (fixP->fx_addsy))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("cannot represent subtraction with an offset"));
-
val = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset
- S_GET_VALUE (fixP->fx_subsy));
fixP->fx_no_overflow = 0; /* Use the standard overflow check. */
break;
+ case BFD_RELOC_XTENSA_TLSDESC_FN:
+ case BFD_RELOC_XTENSA_TLSDESC_ARG:
+ case BFD_RELOC_XTENSA_TLS_TPOFF:
+ case BFD_RELOC_XTENSA_TLS_DTPOFF:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ md_number_to_chars (fixpos, 0, fixP->fx_size);
+ fixP->fx_no_overflow = 0; /* Use the standard overflow check. */
+ break;
+
case BFD_RELOC_XTENSA_SLOT0_OP:
case BFD_RELOC_XTENSA_SLOT1_OP:
case BFD_RELOC_XTENSA_SLOT2_OP:
by the linker, and it makes the object file disassembly
readable when all branch targets are encoded in relocations. */
- assert (fixP->fx_addsy);
+ gas_assert (fixP->fx_addsy);
if (S_GET_SEGMENT (fixP->fx_addsy) == seg
&& !S_FORCE_RELOC (fixP->fx_addsy, 1))
{
break;
case BFD_RELOC_XTENSA_ASM_EXPAND:
+ case BFD_RELOC_XTENSA_TLS_FUNC:
+ case BFD_RELOC_XTENSA_TLS_ARG:
+ case BFD_RELOC_XTENSA_TLS_CALL:
case BFD_RELOC_XTENSA_SLOT0_ALT:
case BFD_RELOC_XTENSA_SLOT1_ALT:
case BFD_RELOC_XTENSA_SLOT2_ALT:
/* Make sure none of our internal relocations make it this far.
They'd better have been fully resolved by this point. */
- assert ((int) fixp->fx_r_type > 0);
+ gas_assert ((int) fixp->fx_r_type > 0);
reloc->addend = fixp->fx_offset;
{
xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i);
int stage = (rt->opcode_unit_stage) (rt->data, opcode, i);
- assert (rt->units[stage + cycle][unit] > 0);
+ gas_assert (rt->units[stage + cycle][unit] > 0);
rt->units[stage + cycle][unit]--;
}
}
{
xtensa_isa isa = xtensa_default_isa;
rt = new_resource_table
- (isa, xtensa_isa_num_pipe_stages (isa),
+ (isa, xtensa_num_pipe_stages,
xtensa_isa_num_funcUnits (isa),
(unit_num_copies_func) xtensa_funcUnit_num_copies,
(opcode_num_units_func) xtensa_opcode_num_funcUnit_uses,
if (vinsn->format == XTENSA_UNDEFINED)
vinsn->format = xg_find_narrowest_format (vinsn);
+ if (xtensa_format_num_slots (xtensa_default_isa, vinsn->format) > 1
+ && produce_flix == FLIX_NONE)
+ {
+ as_bad (_("The option \"--no-allow-flix\" prohibits multi-slot flix."));
+ xg_clear_vinsn (vinsn);
+ return;
+ }
+
if (vinsn->format == XTENSA_UNDEFINED)
{
as_where (&file_name, &line);
TInsn *insn = &slotstack.insn[j];
if (insn->insn_type == ITYPE_LITERAL)
{
- assert (lit_sym == NULL);
+ gas_assert (lit_sym == NULL);
lit_sym = xg_assemble_literal (insn);
}
else
{
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
if (lit_sym)
xg_resolve_literals (insn, lit_sym);
if (j != slotstack.ninsn - 1)
int branches = 0;
xtensa_isa isa = xtensa_default_isa;
- assert (!past_xtensa_end);
+ gas_assert (!past_xtensa_end);
for (i = 0 ; i < vinsn->num_slots; i++)
{
{
xtensa_state t1_so = xtensa_stateOperand_state (isa, t1->opcode, i);
t1_inout = xtensa_stateOperand_inout (isa, t1->opcode, i);
- if (t1_so != t2_so)
+ if (t1_so != t2_so || xtensa_state_is_shared_or (isa, t1_so) == 1)
continue;
if (t2_inout == 'i' && (t1_inout == 'm' || t1_inout == 'o'))
xtensa_isa isa = xtensa_default_isa;
xtensa_format format;
- vliw_insn v_copy = *vinsn;
xtensa_opcode nop_opcode = xtensa_nop_opcode;
if (vinsn->num_slots == 1)
for (format = 0; format < xtensa_isa_num_formats (isa); format++)
{
- v_copy = *vinsn;
+ vliw_insn v_copy;
+ xg_copy_vinsn (&v_copy, vinsn);
if (xtensa_format_num_slots (isa, format) == v_copy.num_slots)
{
int slot;
}
if (fit == v_copy.num_slots)
{
- *vinsn = v_copy;
+ xg_copy_vinsn (vinsn, &v_copy);
xtensa_format_encode (isa, format, vinsn->insnbuf);
vinsn->format = format;
break;
int slot, chosen_slot;
vinsn->format = xg_get_single_format (tinsn->opcode);
- assert (vinsn->format != XTENSA_UNDEFINED);
+ gas_assert (vinsn->format != XTENSA_UNDEFINED);
vinsn->num_slots = xtensa_format_num_slots (isa, vinsn->format);
chosen_slot = xg_get_single_slot (tinsn->opcode);
|| orig_insn->opcode == xtensa_movi_n_opcode)
&& !cur_vinsn.inside_bundle
&& (orig_insn->tok[1].X_op == O_symbol
- || orig_insn->tok[1].X_op == O_pltrel)
+ || orig_insn->tok[1].X_op == O_pltrel
+ || orig_insn->tok[1].X_op == O_tlsfunc
+ || orig_insn->tok[1].X_op == O_tlsarg
+ || orig_insn->tok[1].X_op == O_tpoff
+ || orig_insn->tok[1].X_op == O_dtpoff)
&& !orig_insn->is_specific_opcode && use_transform ())
xg_assembly_relax (&istack, orig_insn, now_seg, frag_now, 0, 1, 0);
else
switch (insn->insn_type)
{
case ITYPE_LITERAL:
- assert (lit_sym == NULL);
+ gas_assert (lit_sym == NULL);
lit_sym = xg_assemble_literal (insn);
break;
case ITYPE_LABEL:
char *label = xmalloc (strlen (FAKE_LABEL_NAME) + 12);
sprintf (label, "%s_rl_%x", FAKE_LABEL_NAME, relaxed_sym_idx++);
colon (label);
- assert (label_sym == NULL);
+ gas_assert (label_sym == NULL);
label_sym = symbol_find_or_make (label);
- assert (label_sym);
+ gas_assert (label_sym);
free (label);
}
break;
}
break;
default:
- assert (0);
+ gas_assert (0);
break;
}
}
int slot;
int total_expansion = 0;
- for (slot = 0; slot < MAX_SLOTS; slot++)
+ for (slot = 0; slot < config_max_slots; slot++)
total_expansion += fragP->tc_frag_data.text_expansion[slot];
return total_expansion;
frag_now->tc_frag_data.literal_frags[slot] = tinsn->literal_frag;
if (tinsn->literal_space != 0)
xg_assemble_literal_space (tinsn->literal_space, slot);
+ frag_now->tc_frag_data.free_reg[slot] = tinsn->extra_arg;
if (tinsn->subtype == RELAX_NARROW)
- assert (vinsn->num_slots == 1);
+ gas_assert (vinsn->num_slots == 1);
if (xtensa_opcode_is_jump (isa, tinsn->opcode) == 1)
is_jump = TRUE;
if (xtensa_opcode_is_branch (isa, tinsn->opcode) == 1)
{
if (is_jump)
{
- assert (finish_frag);
+ gas_assert (finish_frag);
frag_var (rs_machine_dependent,
- UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH,
+ xtensa_fetch_width, xtensa_fetch_width,
RELAX_UNREACHABLE,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
}
else if (is_branch && do_align_targets ())
{
- assert (finish_frag);
+ gas_assert (finish_frag);
frag_var (rs_machine_dependent,
- UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH,
+ xtensa_fetch_width, xtensa_fetch_width,
RELAX_MAYBE_UNREACHABLE,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
static bfd_boolean
is_narrow_branch_guaranteed_in_range (fragS *fragP, TInsn *tinsn)
{
- const expressionS *expr = &tinsn->tok[1];
- symbolS *symbolP = expr->X_add_symbol;
- offsetT max_distance = expr->X_add_number;
+ const expressionS *exp = &tinsn->tok[1];
+ symbolS *symbolP = exp->X_add_symbol;
+ offsetT max_distance = exp->X_add_number;
fragS *target_frag;
- if (expr->X_op != O_symbol)
+ if (exp->X_op != O_symbol)
return FALSE;
target_frag = symbol_get_frag (symbolP);
|| fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE))
{
/* Find the loop frag. */
- fragS *targ_frag = next_non_empty_frag (fragP);
+ fragS *loop_frag = next_non_empty_frag (fragP);
/* Find the first insn frag. */
- targ_frag = next_non_empty_frag (targ_frag);
+ fragS *targ_frag = next_non_empty_frag (loop_frag);
+
+ /* Handle a corner case that comes up in hardware
+ diagnostics. The original assembly looks like this:
+
+ loop aX, LabelA
+ <empty_frag>--not found by next_non_empty_frag
+ loop aY, LabelB
+
+ Depending on the start address, the assembler may or
+ may not change it to look something like this:
+
+ loop aX, LabelA
+ nop--frag isn't empty anymore
+ loop aY, LabelB
+
+ So set up to check the alignment of the nop if it
+ exists */
+ while (loop_frag != targ_frag)
+ {
+ if (loop_frag->fr_type == rs_machine_dependent
+ && (loop_frag->fr_subtype == RELAX_ALIGN_NEXT_OPCODE
+ || loop_frag->fr_subtype
+ == RELAX_CHECK_ALIGN_NEXT_OPCODE))
+ targ_frag = loop_frag;
+ else
+ loop_frag = loop_frag->fr_next;
+ }
/* Of course, sometimes (mostly for toy test cases) a
zero-cost loop instruction is the last in a section. */
}
-/* Some difference-of-symbols expressions make it out to the linker. Some
- don't. If one does, then the linker can optimize between the two labels.
- If it doesn't, then the linker shouldn't. */
-
+/* When a difference-of-symbols expression is encoded as a uleb128 or
+ sleb128 value, the linker is unable to adjust that value to account for
+ link-time relaxation. Mark all the code between such symbols so that
+ its size cannot be changed by linker relaxation. */
+
static void
xtensa_mark_difference_of_two_symbols (void)
{
for (expr_sym = expr_symbols; expr_sym;
expr_sym = symbol_get_tc (expr_sym)->next_expr_symbol)
{
- expressionS *expr = symbol_get_value_expression (expr_sym);
+ expressionS *exp = symbol_get_value_expression (expr_sym);
- if (expr->X_op == O_subtract)
+ if (exp->X_op == O_subtract)
{
- symbolS *left = expr->X_add_symbol;
- symbolS *right = expr->X_op_symbol;
+ symbolS *left = exp->X_add_symbol;
+ symbolS *right = exp->X_op_symbol;
/* Difference of two symbols not in the same section
are handled with relocations in the linker. */
{
fragS *start;
fragS *end;
+ fragS *walk;
if (symbol_get_frag (left)->fr_address
<= symbol_get_frag (right)->fr_address)
start = symbol_get_frag (right);
end = symbol_get_frag (left);
}
+
+ if (start->tc_frag_data.no_transform_end != NULL)
+ walk = start->tc_frag_data.no_transform_end;
+ else
+ walk = start;
do
{
- start->tc_frag_data.is_no_transform = 1;
- start = start->fr_next;
+ walk->tc_frag_data.is_no_transform = 1;
+ walk = walk->fr_next;
}
- while (start && start->fr_address < end->fr_address);
+ while (walk && walk->fr_address < end->fr_address);
+
+ start->tc_frag_data.no_transform_end = walk;
}
}
}
}
frag_wane (fragP);
}
- assert (fragP->fr_type != rs_machine_dependent
+ gas_assert (fragP->fr_type != rs_machine_dependent
|| fragP->fr_subtype != RELAX_ADD_NOP_IF_CLOSE_LOOP_END);
}
}
break;
default:
/* We had darn well better know how big it is. */
- assert (0);
+ gas_assert (0);
break;
}
for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
{
fragS *fragP;
- fragS *current_target = NULL;
xtensa_opcode current_opcode = XTENSA_UNDEFINED;
/* Walk over all of the fragments in a subsection. */
TInsn t_insn;
fragS *loop_frag = next_non_empty_frag (fragP);
tinsn_from_chars (&t_insn, loop_frag->fr_opcode, 0);
- current_target = symbol_get_frag (fragP->fr_symbol);
current_opcode = t_insn.opcode;
- assert (xtensa_opcode_is_loop (xtensa_default_isa,
+ gas_assert (xtensa_opcode_is_loop (xtensa_default_isa,
current_opcode) == 1);
}
static bfd_boolean
is_empty_loop (const TInsn *insn, fragS *fragP)
{
- const expressionS *expr;
+ const expressionS *exp;
symbolS *symbolP;
fragS *next_fragP;
if (insn->ntok <= LOOP_IMMED_OPN)
return FALSE;
- expr = &insn->tok[LOOP_IMMED_OPN];
+ exp = &insn->tok[LOOP_IMMED_OPN];
- if (expr->X_op != O_symbol)
+ if (exp->X_op != O_symbol)
return FALSE;
- symbolP = expr->X_add_symbol;
+ symbolP = exp->X_add_symbol;
if (!symbolP)
return FALSE;
static bfd_boolean
is_local_forward_loop (const TInsn *insn, fragS *fragP)
{
- const expressionS *expr;
+ const expressionS *exp;
symbolS *symbolP;
fragS *next_fragP;
if (insn->ntok <= LOOP_IMMED_OPN)
return FALSE;
- expr = &insn->tok[LOOP_IMMED_OPN];
+ exp = &insn->tok[LOOP_IMMED_OPN];
- if (expr->X_op != O_symbol)
+ if (exp->X_op != O_symbol)
return FALSE;
- symbolP = expr->X_add_symbol;
+ symbolP = exp->X_add_symbol;
if (!symbolP)
return FALSE;
{
if (target_size <= 4)
return 2;
- assert (target_size == 8);
- return 3;
+
+ if (target_size <= 8)
+ return 3;
+
+ if (target_size <= 16)
+ return 4;
+
+ if (target_size <= 32)
+ return 5;
+
+ if (target_size <= 64)
+ return 6;
+
+ if (target_size <= 128)
+ return 7;
+
+ if (target_size <= 256)
+ return 8;
+
+ if (target_size <= 512)
+ return 9;
+
+ if (target_size <= 1024)
+ return 10;
+
+ gas_assert (0);
+ return 0;
}
bfd_boolean skip_one = FALSE;
alignment = (1 << align_pow);
- assert (target_size > 0 && alignment >= (addressT) target_size);
+ gas_assert (target_size > 0 && alignment >= (addressT) target_size);
if (!use_nops)
{
== (address + fill + target_size - 1) >> align_pow)
return fill;
}
- assert (0);
+ gas_assert (0);
return 0;
}
static int
branch_align_power (segT sec)
{
- /* If the Xtensa processor has a fetch width of 8 bytes, and the section
- is aligned to at least an 8-byte boundary, then a branch target need
- only fit within an 8-byte aligned block of memory to avoid a stall.
- Otherwise, try to fit branch targets within 4-byte aligned blocks
- (which may be insufficient, e.g., if the section has no alignment, but
- it's good enough). */
- if (xtensa_fetch_width == 8)
- {
- if (get_recorded_alignment (sec) >= 3)
- return 3;
- }
- else
- assert (xtensa_fetch_width == 4);
+ /* If the Xtensa processor has a fetch width of X, and
+ the section is aligned to at least that boundary, then a branch
+ target need only fit within that aligned block of memory to avoid
+ a stall. Otherwise, try to fit branch targets within 4-byte
+ aligned blocks (which may be insufficient, e.g., if the section
+ has no alignment, but it's good enough). */
+ int fetch_align = get_text_align_power(xtensa_fetch_width);
+ int sec_align = get_recorded_alignment (sec);
+
+ if (sec_align >= fetch_align)
+ return fetch_align;
return 2;
}
if (use_no_density)
{
- assert (fill_size % 3 == 0);
+ gas_assert (fill_size % 3 == 0);
return (fill_size / 3);
}
- assert (fill_size != 1); /* Bad argument. */
+ gas_assert (fill_size != 1); /* Bad argument. */
while (fill_size > 1)
{
fill_size -= insn_size;
count++;
}
- assert (fill_size != 1); /* Bad algorithm. */
+ gas_assert (fill_size != 1); /* Bad algorithm. */
return count;
}
if (use_no_density)
return 3;
- assert (fill_size != 1); /* Bad argument. */
+ gas_assert (fill_size != 1); /* Bad argument. */
while (fill_size > 1)
{
if (n + 1 == count)
return insn_size;
}
- assert (0);
+ gas_assert (0);
return 0;
}
xtensa_opcode opcode;
bfd_boolean is_loop;
- assert (fragP->fr_type == rs_machine_dependent);
- assert (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE);
+ gas_assert (fragP->fr_type == rs_machine_dependent);
+ gas_assert (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE);
/* Find the loop frag. */
first_insn = next_non_empty_frag (fragP);
first_insn = next_non_empty_frag (first_insn);
is_loop = next_frag_opcode_is_loop (fragP, &opcode);
- assert (is_loop);
+ gas_assert (is_loop);
loop_insn_size = xg_get_single_size (opcode);
pre_opcode_bytes = next_frag_pre_opcode_bytes (fragP);
offsetT branch_align;
fragS *loop_frag;
- assert (fragP->fr_type == rs_machine_dependent);
+ gas_assert (fragP->fr_type == rs_machine_dependent);
switch (fragP->fr_subtype)
{
case RELAX_DESIRE_ALIGN:
*max_diff = (opt_diff + branch_align
- (target_size + ((address + opt_diff) % branch_align)));
- assert (*max_diff >= opt_diff);
+ gas_assert (*max_diff >= opt_diff);
return opt_diff;
case RELAX_ALIGN_NEXT_OPCODE:
target_size = get_loop_align_size (next_frag_format_size (loop_frag));
loop_insn_offset = 0;
is_loop = next_frag_opcode_is_loop (fragP, &loop_opcode);
- assert (is_loop);
+ gas_assert (is_loop);
/* If the loop has been expanded then the LOOP instruction
could be at an offset from this fragment. */
*max_diff = xtensa_fetch_width
- ((target_address + opt_diff) % xtensa_fetch_width)
- target_size + opt_diff;
- assert (*max_diff >= opt_diff);
+ gas_assert (*max_diff >= opt_diff);
return opt_diff;
default:
break;
}
- assert (0);
+ gas_assert (0);
return 0;
}
case RELAX_LITERAL_NR:
lit_size = 4;
fragP->fr_subtype = RELAX_LITERAL_FINAL;
- assert (unreported == lit_size);
+ gas_assert (unreported == lit_size);
memset (&fragP->fr_literal[fragP->fr_fix], 0, 4);
fragP->fr_var -= lit_size;
fragP->fr_fix += lit_size;
long stretch_me;
long diff;
- assert (fragP->fr_subtype == RELAX_FILL_NOP
+ gas_assert (fragP->fr_subtype == RELAX_FILL_NOP
|| fragP->fr_subtype == RELAX_UNREACHABLE
|| (fragP->fr_subtype == RELAX_SLOTS
&& fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW));
(*widens)++;
break;
}
- address += total_frag_text_expansion (fragP);;
+ address += total_frag_text_expansion (fragP);
break;
case RELAX_IMMED:
{
local_opt_diff = get_aligned_diff (fragP, address, &max_diff);
opt_diff = local_opt_diff;
- assert (opt_diff >= 0);
- assert (max_diff >= opt_diff);
+ gas_assert (opt_diff >= 0);
+ gas_assert (max_diff >= opt_diff);
if (max_diff == 0)
return 0;
{
if (this_frag->fr_subtype == RELAX_UNREACHABLE)
{
- assert (opt_diff <= UNREACHABLE_MAX_WIDTH);
+ gas_assert (opt_diff <= (signed) xtensa_fetch_width);
return opt_diff;
}
return 0;
if (this_frag->fr_subtype == RELAX_SLOTS
&& this_frag->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
- assert (stretch_amount <= 1);
+ gas_assert (stretch_amount <= 1);
else if (this_frag->fr_subtype == RELAX_FILL_NOP)
{
if (this_frag->tc_frag_data.is_no_density)
- assert (stretch_amount == 3 || stretch_amount == 0);
+ gas_assert (stretch_amount == 3 || stretch_amount == 0);
else
- assert (stretch_amount <= 3);
+ gas_assert (stretch_amount <= 3);
}
}
return stretch_amount;
/* The idea: widen everything you can to get a target or loop aligned,
then start using NOPs.
- When we must have a NOP, here is a table of how we decide
- (so you don't have to fight through the control flow below):
-
wide_nops = the number of wide NOPs available for aligning
narrow_nops = the number of narrow NOPs available for aligning
(a subset of wide_nops)
widens = the number of narrow instructions that should be widened
- Desired wide narrow
- Diff nop nop widens
- 1 0 0 1
- 2 0 1 0
- 3a 1 0 0
- b 0 1 1 (case 3a makes this case unnecessary)
- 4a 1 0 1
- b 0 2 0
- c 0 1 2 (case 4a makes this case unnecessary)
- 5a 1 0 2
- b 1 1 0
- c 0 2 1 (case 5b makes this case unnecessary)
- 6a 2 0 0
- b 1 0 3
- c 0 1 4 (case 6b makes this case unnecessary)
- d 1 1 1 (case 6a makes this case unnecessary)
- e 0 2 2 (case 6a makes this case unnecessary)
- f 0 3 0 (case 6a makes this case unnecessary)
- 7a 1 0 4
- b 2 0 1
- c 1 1 2 (case 7b makes this case unnecessary)
- d 0 1 5 (case 7a makes this case unnecessary)
- e 0 2 3 (case 7b makes this case unnecessary)
- f 0 3 1 (case 7b makes this case unnecessary)
- g 1 2 1 (case 7b makes this case unnecessary)
*/
static long
int num_widens,
int desired_diff)
{
+ int nops_needed;
+ int nop_bytes;
+ int extra_bytes;
int bytes_short = desired_diff - num_widens;
- assert (desired_diff >= 0 && desired_diff < 8);
+ gas_assert (desired_diff >= 0
+ && desired_diff < (signed) xtensa_fetch_width);
if (desired_diff == 0)
return 0;
- assert (wide_nops > 0 || num_widens > 0);
+ gas_assert (wide_nops > 0 || num_widens > 0);
/* Always prefer widening to NOP-filling. */
if (bytes_short < 0)
/* From here we will need at least one NOP to get an alignment.
However, we may not be able to align at all, in which case,
don't widen. */
- if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ nops_needed = desired_diff / 3;
+
+ /* If there aren't enough nops, don't widen. */
+ if (nops_needed > wide_nops)
+ return 0;
+
+ /* First try it with all wide nops. */
+ nop_bytes = nops_needed * 3;
+ extra_bytes = desired_diff - nop_bytes;
+
+ if (nop_bytes + num_widens >= desired_diff)
{
- switch (desired_diff)
- {
- case 1:
- return 0;
- case 2:
- if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 1)
- return 2; /* case 2 */
- return 0;
- case 3:
- if (wide_nops > 1)
- return 0;
- else
- return 3; /* case 3a */
- case 4:
- if (num_widens >= 1 && wide_nops == 1)
- return 3; /* case 4a */
- if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 2)
- return 2; /* case 4b */
- return 0;
- case 5:
- if (num_widens >= 2 && wide_nops == 1)
- return 3; /* case 5a */
- /* We will need two nops. Are there enough nops
- between here and the align target? */
- if (wide_nops < 2 || narrow_nops == 0)
- return 0;
- /* Are there other nops closer that can serve instead? */
- if (wide_nops > 2 && narrow_nops > 1)
- return 0;
- /* Take the density one first, because there might not be
- another density one available. */
- if (!this_frag->tc_frag_data.is_no_density)
- return 2; /* case 5b narrow */
- else
- return 3; /* case 5b wide */
- return 0;
- case 6:
- if (wide_nops == 2)
- return 3; /* case 6a */
- else if (num_widens >= 3 && wide_nops == 1)
- return 3; /* case 6b */
- return 0;
- case 7:
- if (wide_nops == 1 && num_widens >= 4)
- return 3; /* case 7a */
- else if (wide_nops == 2 && num_widens >= 1)
- return 3; /* case 7b */
- return 0;
- default:
- assert (0);
- }
+ if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ return 3;
+ else if (num_widens == extra_bytes)
+ return 1;
+ return 0;
}
- else
+
+ /* Add a narrow nop. */
+ nops_needed++;
+ nop_bytes += 2;
+ extra_bytes -= 2;
+ if (narrow_nops == 0 || nops_needed > wide_nops)
+ return 0;
+
+ if (nop_bytes + num_widens >= desired_diff && extra_bytes >= 0)
{
- /* We will need a NOP no matter what, but should we widen
- this instruction to help?
+ if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ return !this_frag->tc_frag_data.is_no_density ? 2 : 3;
+ else if (num_widens == extra_bytes)
+ return 1;
+ return 0;
+ }
- This is a RELAX_NARROW frag. */
- switch (desired_diff)
- {
- case 1:
- assert (0);
- return 0;
- case 2:
- case 3:
- return 0;
- case 4:
- if (wide_nops >= 1 && num_widens == 1)
- return 1; /* case 4a */
- return 0;
- case 5:
- if (wide_nops >= 1 && num_widens == 2)
- return 1; /* case 5a */
- return 0;
- case 6:
- if (wide_nops >= 2)
- return 0; /* case 6a */
- else if (wide_nops >= 1 && num_widens == 3)
- return 1; /* case 6b */
- return 0;
- case 7:
- if (wide_nops >= 1 && num_widens == 4)
- return 1; /* case 7a */
- else if (wide_nops >= 2 && num_widens == 1)
- return 1; /* case 7b */
- return 0;
- default:
- assert (0);
- return 0;
- }
+ /* Replace a wide nop with a narrow nop--we can get here if
+ extra_bytes was negative in the previous conditional. */
+ if (narrow_nops == 1)
+ return 0;
+ nop_bytes--;
+ extra_bytes++;
+ if (nop_bytes + num_widens >= desired_diff)
+ {
+ if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ return !this_frag->tc_frag_data.is_no_density ? 2 : 3;
+ else if (num_widens == extra_bytes)
+ return 1;
+ return 0;
}
- assert (0);
+
+ /* If we can't satisfy any of the above cases, then we can't align
+ using padding or fill nops. */
return 0;
}
IStack istack;
offsetT frag_offset;
int num_steps;
- fragS *lit_fragP;
int num_text_bytes, num_literal_bytes;
- int literal_diff, total_text_diff, this_text_diff, first;
+ int literal_diff, total_text_diff, this_text_diff;
- assert (fragP->fr_opcode != NULL);
+ gas_assert (fragP->fr_opcode != NULL);
xg_clear_vinsn (&cur_vinsn);
vinsn_from_chars (&cur_vinsn, fragP->fr_opcode);
istack_init (&istack);
num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP, frag_offset,
min_steps, stretch);
- if (num_steps < min_steps)
- {
- as_fatal (_("internal error: relaxation failed"));
- return 0;
- }
-
- if (num_steps > RELAX_IMMED_MAXSTEPS)
- {
- as_fatal (_("internal error: relaxation requires too many steps"));
- return 0;
- }
+ gas_assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
fragP->tc_frag_data.slot_subtypes[slot] = (int) RELAX_IMMED + num_steps;
/* Figure out the number of bytes needed. */
- lit_fragP = 0;
num_literal_bytes = get_num_stack_literal_bytes (&istack);
- literal_diff =
- num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
- first = 0;
- while (istack.insn[first].opcode == XTENSA_UNDEFINED)
- first++;
-
+ literal_diff
+ = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
num_text_bytes = get_num_stack_text_bytes (&istack);
if (from_wide_insn)
{
+ int first = 0;
+ while (istack.insn[first].opcode == XTENSA_UNDEFINED)
+ first++;
+
num_text_bytes += old_size;
if (opcode_fits_format_slot (istack.insn[first].opcode, fmt, slot))
num_text_bytes -= xg_get_single_size (istack.insn[first].opcode);
+ else
+ {
+ /* The first instruction in the relaxed sequence will go after
+ the current wide instruction, and thus its symbolic immediates
+ might not fit. */
+
+ istack_init (&istack);
+ num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP,
+ frag_offset + old_size,
+ min_steps, stretch + old_size);
+ gas_assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
+
+ fragP->tc_frag_data.slot_subtypes[slot]
+ = (int) RELAX_IMMED + num_steps;
+
+ num_literal_bytes = get_num_stack_literal_bytes (&istack);
+ literal_diff
+ = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
+
+ num_text_bytes = get_num_stack_text_bytes (&istack) + old_size;
+ }
}
total_text_diff = num_text_bytes - old_size;
this_text_diff = total_text_diff - fragP->tc_frag_data.text_expansion[slot];
/* It MUST get larger. If not, we could get an infinite loop. */
- assert (num_text_bytes >= 0);
- assert (literal_diff >= 0);
- assert (total_text_diff >= 0);
+ gas_assert (num_text_bytes >= 0);
+ gas_assert (literal_diff >= 0);
+ gas_assert (total_text_diff >= 0);
fragP->tc_frag_data.text_expansion[slot] = total_text_diff;
fragP->tc_frag_data.literal_expansion[slot] = num_literal_bytes;
- assert (fragP->tc_frag_data.text_expansion[slot] >= 0);
- assert (fragP->tc_frag_data.literal_expansion[slot] >= 0);
+ gas_assert (fragP->tc_frag_data.text_expansion[slot] >= 0);
+ gas_assert (fragP->tc_frag_data.literal_expansion[slot] >= 0);
/* Find the associated expandable literal for this. */
if (literal_diff != 0)
{
- lit_fragP = fragP->tc_frag_data.literal_frags[slot];
+ fragS *lit_fragP = fragP->tc_frag_data.literal_frags[slot];
if (lit_fragP)
{
- assert (literal_diff == 4);
+ gas_assert (literal_diff == 4);
lit_fragP->tc_frag_data.unreported_expansion += literal_diff;
/* We expect that the literal section state has NOT been
modified yet. */
- assert (lit_fragP->fr_type == rs_machine_dependent
+ gas_assert (lit_fragP->fr_type == rs_machine_dependent
&& lit_fragP->fr_subtype == RELAX_LITERAL);
lit_fragP->fr_subtype = RELAX_LITERAL_NR;
fragS *f;
fragp->fr_subtype = RELAX_LITERAL_FINAL;
- assert (fragp->tc_frag_data.unreported_expansion == 4);
+ gas_assert (fragp->tc_frag_data.unreported_expansion == 4);
memset (&fragp->fr_literal[fragp->fr_fix], 0, 4);
fragp->fr_var -= 4;
fragp->fr_fix += 4;
int size, old_size, diff;
offsetT frag_offset;
- assert (slot == 0);
+ gas_assert (slot == 0);
tinsn_from_chars (&tinsn, fragP->fr_opcode, 0);
if (fragP->tc_frag_data.is_aligning_branch == 1)
{
- assert (fragP->tc_frag_data.text_expansion[0] == 1
+ gas_assert (fragP->tc_frag_data.text_expansion[0] == 1
|| fragP->tc_frag_data.text_expansion[0] == 0);
convert_frag_immed (segP, fragP, fragP->tc_frag_data.text_expansion[0],
fmt, slot);
return;
}
- assert (fragP->fr_opcode != NULL);
+ gas_assert (fragP->fr_opcode != NULL);
/* Frags in this relaxation state should only contain
single instruction bundles. */
frag_offset, TRUE);
diff = size - old_size;
- assert (diff >= 0);
- assert (diff <= fragP->fr_var);
+ gas_assert (diff >= 0);
+ gas_assert (diff <= fragP->fr_var);
fragP->fr_var -= diff;
fragP->fr_fix += diff;
{
char *loc = &fragP->fr_literal[fragP->fr_fix];
int size = fragP->tc_frag_data.text_expansion[0];
- assert ((unsigned) size == (fragP->fr_next->fr_address
+ gas_assert ((unsigned) size == (fragP->fr_next->fr_address
- fragP->fr_address - fragP->fr_fix));
if (size == 0)
{
int bytes;
bfd_boolean is_loop;
- assert (fr_opcode != NULL);
+ gas_assert (fr_opcode != NULL);
xg_clear_vinsn (&cur_vinsn);
else
{
bytes += fragP->tc_frag_data.text_expansion[0];
- assert (bytes == 2 || bytes == 3);
+ gas_assert (bytes == 2 || bytes == 3);
build_nop (&cur_vinsn.slots[0], bytes);
fragP->fr_fix += fragP->tc_frag_data.text_expansion[0];
}
symbolS *gen_label = NULL;
offsetT frag_offset;
bfd_boolean first = TRUE;
- bfd_boolean last_is_jump;
/* It does not fit. Find something that does and
convert immediately. */
unreach = unreach->fr_next;
}
- assert (unreach->fr_type == rs_machine_dependent
+ gas_assert (unreach->fr_type == rs_machine_dependent
&& (unreach->fr_subtype == RELAX_MAYBE_UNREACHABLE
|| unreach->fr_subtype == RELAX_UNREACHABLE));
target_offset += unreach->tc_frag_data.text_expansion[0];
}
- assert (gen_label == NULL);
+ gas_assert (gen_label == NULL);
gen_label = symbol_new (FAKE_LABEL_NAME, now_seg,
fr_opcode - fragP->fr_literal
+ target_offset, fragP);
total_size = 0;
first = TRUE;
- last_is_jump = FALSE;
for (i = 0; i < istack.ninsn; i++)
{
TInsn *tinsn = &istack.insn[i];
case ITYPE_LITERAL:
lit_frag = fragP->tc_frag_data.literal_frags[slot];
/* Already checked. */
- assert (lit_frag != NULL);
- assert (lit_sym != NULL);
- assert (tinsn->ntok == 1);
+ gas_assert (lit_frag != NULL);
+ gas_assert (lit_sym != NULL);
+ gas_assert (tinsn->ntok == 1);
/* Add a fixup. */
target_seg = S_GET_SEGMENT (lit_sym);
- assert (target_seg);
- reloc_type = map_operator_to_reloc (tinsn->tok[0].X_op);
+ gas_assert (target_seg);
+ reloc_type = map_operator_to_reloc (tinsn->tok[0].X_op, TRUE);
fix_new_exp_in_seg (target_seg, 0, lit_frag, 0, 4,
&tinsn->tok[0], FALSE, reloc_type);
break;
}
diff = total_size - old_size;
- assert (diff >= 0);
+ gas_assert (diff >= 0);
if (diff != 0)
expanded = TRUE;
- assert (diff <= fragP->fr_var);
+ gas_assert (diff <= fragP->fr_var);
fragP->fr_var -= diff;
fragP->fr_fix += diff;
}
segT seg = now_seg;
subsegT subseg = now_subseg;
- assert (new_seg != 0);
+ gas_assert (new_seg != 0);
subseg_set (new_seg, new_subseg);
new_fix = fix_new_exp (frag, where, size, exp, pcrel, r_type);
tinsn_from_chars (&loop_insn, fragP->fr_opcode + loop_offset, 0);
tinsn_immed_from_frag (&loop_insn, fragP, 0);
- assert (xtensa_opcode_is_loop (isa, loop_insn.opcode) == 1);
+ gas_assert (xtensa_opcode_is_loop (isa, loop_insn.opcode) == 1);
addi_offset += loop_offset;
addmi_offset += loop_offset;
- assert (tinsn->ntok == 2);
+ gas_assert (tinsn->ntok == 2);
if (tinsn->tok[1].X_op == O_constant)
target = tinsn->tok[1].X_add_number;
else if (tinsn->tok[1].X_op == O_symbol)
{
/* Find the fragment. */
symbolS *sym = tinsn->tok[1].X_add_symbol;
- assert (S_GET_SEGMENT (sym) == segP
+ gas_assert (S_GET_SEGMENT (sym) == segP
|| S_GET_SEGMENT (sym) == absolute_section);
target = (S_GET_VALUE (sym) + tinsn->tok[1].X_add_number);
}
_("loop too long for LOOP instruction"));
tinsn_from_chars (&addi_insn, fragP->fr_opcode + addi_offset, 0);
- assert (addi_insn.opcode == xtensa_addi_opcode);
+ gas_assert (addi_insn.opcode == xtensa_addi_opcode);
tinsn_from_chars (&addmi_insn, fragP->fr_opcode + addmi_offset, 0);
- assert (addmi_insn.opcode == xtensa_addmi_opcode);
+ gas_assert (addmi_insn.opcode == xtensa_addmi_opcode);
set_expr_const (&addi_insn.tok[2], loop_length_lo);
tinsn_to_insnbuf (&addi_insn, insnbuf);
segT literal_section = head->seg;
/* Move the literal section to the front of the section list. */
- assert (literal_section);
+ gas_assert (literal_section);
if (literal_section != stdoutput->sections)
{
bfd_section_list_remove (stdoutput, literal_section);
{
seg_list *segment;
frchainS *frchain_from, *frchain_to;
- fragS *search_frag, *next_frag, *last_frag, *literal_pool, *insert_after;
+ fragS *search_frag, *next_frag, *literal_pool, *insert_after;
fragS **frag_splice;
emit_state state;
segT dest_seg;
while (!search_frag->tc_frag_data.literal_frag)
{
- assert (search_frag->fr_fix == 0
+ gas_assert (search_frag->fr_fix == 0
|| search_frag->fr_type == rs_align);
search_frag = search_frag->fr_next;
}
- assert (search_frag->tc_frag_data.literal_frag->fr_subtype
+ gas_assert (search_frag->tc_frag_data.literal_frag->fr_subtype
== RELAX_LITERAL_POOL_BEGIN);
xtensa_switch_section_emit_state (&state, segment->seg, 0);
frags in it. */
frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
- last_frag = frag_now;
frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
if (search_frag->tc_frag_data.literal_frag)
{
literal_pool = search_frag->tc_frag_data.literal_frag;
- assert (literal_pool->fr_subtype == RELAX_LITERAL_POOL_BEGIN);
+ gas_assert (literal_pool->fr_subtype == RELAX_LITERAL_POOL_BEGIN);
frchain_to = literal_pool->tc_frag_data.lit_frchain;
- assert (frchain_to);
+ gas_assert (frchain_to);
}
insert_after = literal_pool->tc_frag_data.literal_frag;
dest_seg = insert_after->fr_next->tc_frag_data.lit_seg;
frchain_from = seg_info (segment->seg)->frchainP;
as_warn (_("fixes not all moved from %s"), segment->seg->name);
- assert (frchain_from->fix_root == NULL);
+ gas_assert (frchain_from->fix_root == NULL);
}
frchain_from->fix_tail = NULL;
xtensa_restore_emit_state (&state);
for (lit = literal_syms; lit; lit = lit->next)
{
symbolS *lit_sym = lit->sym;
- segT dest_seg = symbol_get_frag (lit_sym)->tc_frag_data.lit_seg;
- if (dest_seg)
- S_SET_SEGMENT (lit_sym, dest_seg);
+ segT dseg = symbol_get_frag (lit_sym)->tc_frag_data.lit_seg;
+ if (dseg)
+ S_SET_SEGMENT (lit_sym, dseg);
}
}
segT literal_section = head->seg;
/* Move the literal section after "after". */
- assert (literal_section);
+ gas_assert (literal_section);
if (literal_section != after)
{
bfd_section_list_remove (stdoutput, literal_section);
/* Now perform the final error check. */
for (sec = stdoutput->sections; sec != NULL; sec = sec->next)
new_count++;
- assert (new_count == old_count);
+ gas_assert (new_count == old_count);
}
}
else
{
- /* If the section name ends with ".text", then replace that suffix
- instead of appending an additional suffix. */
+ /* If the section name begins or ends with ".text", then replace
+ that portion instead of appending an additional suffix. */
size_t len = strlen (text_name);
- if (len >= 5 && strcmp (text_name + len - 5, ".text") == 0)
+ if (len >= 5
+ && (strcmp (text_name + len - 5, ".text") == 0
+ || strncmp (text_name, ".text", 5) == 0))
len -= 5;
name = xmalloc (len + strlen (base_name) + 1);
- strcpy (name, text_name);
- strcpy (name + len, base_name);
+ if (strncmp (text_name, ".text", 5) == 0)
+ {
+ strcpy (name, base_name);
+ strcat (name, text_name + 5);
+ }
+ else
+ {
+ strcpy (name, text_name);
+ strcpy (name + len, base_name);
+ }
}
/* Canonicalize section names to allow renaming literal sections.
(frag_predicate, frag_predicate, const char *, xt_section_type);
static void xtensa_create_xproperty_segments
(frag_flags_fn, const char *, xt_section_type);
+static bfd_boolean exclude_section_from_property_tables (segT);
static bfd_boolean section_has_property (segT, frag_predicate);
static bfd_boolean section_has_xproperty (segT, frag_flags_fn);
static void add_xt_block_frags
static bfd_boolean xtensa_frag_flags_is_empty (const frag_flags *);
static void xtensa_frag_flags_init (frag_flags *);
static void get_frag_property_flags (const fragS *, frag_flags *);
-static bfd_vma frag_flags_to_number (const frag_flags *);
+static flagword frag_flags_to_number (const frag_flags *);
static void add_xt_prop_frags (segT, xtensa_block_info **, frag_flags_fn);
/* Set up property tables after relaxation. */
static bfd_boolean
get_frag_is_literal (const fragS *fragP)
{
- assert (fragP != NULL);
+ gas_assert (fragP != NULL);
return fragP->tc_frag_data.is_literal;
}
seclist = &(*seclist)->next)
{
segT sec = *seclist;
- flagword flags;
- flags = bfd_get_section_flags (stdoutput, sec);
- if (flags & SEC_DEBUGGING)
- continue;
- if (!(flags & SEC_ALLOC))
+ if (exclude_section_from_property_tables (sec))
continue;
if (section_has_property (sec, property_function))
{
segment_info_type *xt_seg_info;
xtensa_block_info **xt_blocks;
- segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+ segT prop_sec = xtensa_make_property_section (sec, section_name_base);
prop_sec->output_section = prop_sec;
subseg_set (prop_sec, 0);
fixS *fix;
/* Write the fixup. */
- assert (cur_block);
+ gas_assert (cur_block);
fix = fix_new (frag_now, i * 8, 4,
section_symbol (cur_block->sec),
cur_block->offset,
seclist = &(*seclist)->next)
{
segT sec = *seclist;
- flagword flags;
- flags = bfd_get_section_flags (stdoutput, sec);
- if ((flags & SEC_DEBUGGING)
- || !(flags & SEC_ALLOC)
- || (flags & SEC_MERGE))
+ if (exclude_section_from_property_tables (sec))
continue;
if (section_has_xproperty (sec, flag_fn))
{
segment_info_type *xt_seg_info;
xtensa_block_info **xt_blocks;
- segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+ segT prop_sec = xtensa_make_property_section (sec, section_name_base);
prop_sec->output_section = prop_sec;
subseg_set (prop_sec, 0);
fixS *fix;
/* Write the fixup. */
- assert (cur_block);
+ gas_assert (cur_block);
fix = fix_new (frag_now, i * 12, 4,
section_symbol (cur_block->sec),
cur_block->offset,
cur_block->size, 4);
md_number_to_chars (&frag_data[8 + i * 12],
frag_flags_to_number (&cur_block->flags),
- 4);
+ sizeof (flagword));
cur_block = cur_block->next;
}
frag_wane (frag_now);
}
+static bfd_boolean
+exclude_section_from_property_tables (segT sec)
+{
+ flagword flags = bfd_get_section_flags (stdoutput, sec);
+
+ /* Sections that don't contribute to the memory footprint are excluded. */
+ if ((flags & SEC_DEBUGGING)
+ || !(flags & SEC_ALLOC)
+ || (flags & SEC_MERGE))
+ return TRUE;
+
+ /* Linker cie and fde optimizations mess up property entries for
+ eh_frame sections, but there is nothing inside them relevant to
+ property tables anyway. */
+ if (strcmp (sec->name, ".eh_frame") == 0)
+ return TRUE;
+
+ return FALSE;
+}
+
+
static bfd_boolean
section_has_property (segT sec, frag_predicate property_function)
{
frag_predicate property_function,
frag_predicate end_property_function)
{
- bfd_vma seg_offset;
fragS *fragP;
/* Build it if needed. */
/* We are either at NULL at the beginning or at the end. */
/* Walk through the frags. */
- seg_offset = 0;
-
if (seg_info (sec)->frchainP)
{
for (fragP = seg_info (sec)->frchainP->frch_root;
prop_flags->is_literal = TRUE;
if (fragP->tc_frag_data.is_specific_opcode
|| fragP->tc_frag_data.is_no_transform)
- prop_flags->is_no_transform = TRUE;
+ {
+ prop_flags->is_no_transform = TRUE;
+ if (xtensa_frag_flags_is_empty (prop_flags))
+ prop_flags->is_data = TRUE;
+ }
if (fragP->tc_frag_data.is_unreachable)
prop_flags->is_unreachable = TRUE;
else if (fragP->tc_frag_data.is_insn)
}
-static bfd_vma
+static flagword
frag_flags_to_number (const frag_flags *prop_flags)
{
- bfd_vma num = 0;
+ flagword num = 0;
if (prop_flags->is_literal)
num |= XTENSA_PROP_LITERAL;
if (prop_flags->is_insn)
xtensa_block_info **xt_block,
frag_flags_fn property_function)
{
- bfd_vma seg_offset;
fragS *fragP;
/* Build it if needed. */
/* We are either at NULL at the beginning or at the end. */
/* Walk through the frags. */
- seg_offset = 0;
-
if (seg_info (sec)->frchainP)
{
for (fragP = seg_info (sec)->frchainP->frch_root; fragP;
op_placement_table = (op_placement_info_table)
xmalloc (sizeof (op_placement_info) * num_opcodes);
- assert (xtensa_isa_num_formats (isa) < MAX_FORMATS);
+ gas_assert (xtensa_isa_num_formats (isa) < MAX_FORMATS);
for (opcode = 0; opcode < num_opcodes; opcode++)
{
op_placement_info *opi = &op_placement_table[opcode];
/* FIXME: Make tinsn allocation dynamic. */
- if (xtensa_opcode_num_operands (isa, opcode) >= MAX_INSN_ARGS)
+ if (xtensa_opcode_num_operands (isa, opcode) > MAX_INSN_ARGS)
as_fatal (_("too many operands in instruction"));
opi->narrowest = XTENSA_UNDEFINED;
opi->narrowest_size = 0x7F;
void
istack_init (IStack *stack)
{
- memset (stack, 0, sizeof (IStack));
stack->ninsn = 0;
}
istack_top (IStack *stack)
{
int rec = stack->ninsn - 1;
- assert (!istack_empty (stack));
+ gas_assert (!istack_empty (stack));
return &stack->insn[rec];
}
istack_push (IStack *stack, TInsn *insn)
{
int rec = stack->ninsn;
- assert (!istack_full (stack));
+ gas_assert (!istack_full (stack));
stack->insn[rec] = *insn;
stack->ninsn++;
}
{
int rec = stack->ninsn;
TInsn *insn;
- assert (!istack_full (stack));
+ gas_assert (!istack_full (stack));
insn = &stack->insn[rec];
tinsn_init (insn);
stack->ninsn++;
istack_pop (IStack *stack)
{
int rec = stack->ninsn - 1;
- assert (!istack_empty (stack));
+ gas_assert (!istack_empty (stack));
stack->ninsn--;
tinsn_init (&stack->insn[rec]);
}
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
{
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
switch (insn->tok[i].X_op)
int noperands = xtensa_opcode_num_operands (isa, opcode);
int i;
- assert (tinsn->insn_type == ITYPE_INSN);
+ gas_assert (tinsn->insn_type == ITYPE_INSN);
if (noperands != tinsn->ntok)
as_fatal (_("operand number mismatch"));
for (i = 0; i < noperands; i++)
{
- expressionS *expr = &tinsn->tok[i];
+ expressionS *exp = &tinsn->tok[i];
int rc;
unsigned line;
char *file_name;
uint32 opnd_value;
- switch (expr->X_op)
+ switch (exp->X_op)
{
case O_register:
if (xtensa_operand_is_visible (isa, opcode, i) == 0)
break;
/* The register number has already been checked in
expression_maybe_register, so we don't need to check here. */
- opnd_value = expr->X_add_number;
+ opnd_value = exp->X_add_number;
(void) xtensa_operand_encode (isa, opcode, i, &opnd_value);
rc = xtensa_operand_set_field (isa, opcode, i, fmt, slot, slotbuf,
opnd_value);
/* It is a constant and we called this function
then we have to try to fit it. */
xtensa_insnbuf_set_operand (slotbuf, fmt, slot, opcode, i,
- expr->X_add_number, file_name, line);
+ exp->X_add_number, file_name, line);
break;
default:
{
xtensa_isa isa = xtensa_default_isa;
xtensa_opcode opcode = insn->opcode;
+ xtensa_regfile t1_regfile, t2_regfile;
+ int t1_reg, t2_reg;
+ int t1_base_reg, t1_last_reg;
+ int t2_base_reg, t2_last_reg;
+ char t1_inout, t2_inout;
+ int i, j;
if (opcode == XTENSA_UNDEFINED)
{
as_bad (_("too many operands"));
return TRUE;
}
+
+ /* Check registers. */
+ for (j = 0; j < insn->ntok; j++)
+ {
+ if (xtensa_operand_is_register (isa, insn->opcode, j) != 1)
+ continue;
+
+ t2_regfile = xtensa_operand_regfile (isa, insn->opcode, j);
+ t2_base_reg = insn->tok[j].X_add_number;
+ t2_last_reg
+ = t2_base_reg + xtensa_operand_num_regs (isa, insn->opcode, j);
+
+ for (i = 0; i < insn->ntok; i++)
+ {
+ if (i == j)
+ continue;
+
+ if (xtensa_operand_is_register (isa, insn->opcode, i) != 1)
+ continue;
+
+ t1_regfile = xtensa_operand_regfile (isa, insn->opcode, i);
+
+ if (t1_regfile != t2_regfile)
+ continue;
+
+ t1_inout = xtensa_operand_inout (isa, insn->opcode, i);
+ t2_inout = xtensa_operand_inout (isa, insn->opcode, j);
+
+ t1_base_reg = insn->tok[i].X_add_number;
+ t1_last_reg = (t1_base_reg
+ + xtensa_operand_num_regs (isa, insn->opcode, i));
+
+ for (t1_reg = t1_base_reg; t1_reg < t1_last_reg; t1_reg++)
+ {
+ for (t2_reg = t2_base_reg; t2_reg < t2_last_reg; t2_reg++)
+ {
+ if (t1_reg != t2_reg)
+ continue;
+
+ if (t1_inout != 'i' && t2_inout != 'i')
+ {
+ as_bad (_("multiple writes to the same register"));
+ return TRUE;
+ }
+ }
+ }
+ }
+ }
return FALSE;
}
if (fragP->tc_frag_data.slot_symbols[slot])
{
opnum = get_relaxable_immed (opcode);
- assert (opnum >= 0);
+ gas_assert (opnum >= 0);
set_expr_symbol_offset (&tinsn->tok[opnum],
fragP->tc_frag_data.slot_symbols[slot],
fragP->tc_frag_data.slot_offsets[slot]);
}
+ tinsn->extra_arg = fragP->tc_frag_data.free_reg[slot];
}
if (v->insnbuf == NULL)
as_fatal (_("out of memory"));
- for (i = 0; i < MAX_SLOTS; i++)
+ for (i = 0; i < config_max_slots; i++)
{
v->slotbuf[i] = xtensa_insnbuf_alloc (isa);
if (v->slotbuf[i] == NULL)
{
int i;
- memset (v, 0, offsetof (vliw_insn, insnbuf));
+ memset (v, 0, offsetof (vliw_insn, slots)
+ + sizeof(TInsn) * config_max_slots);
v->format = XTENSA_UNDEFINED;
v->num_slots = 0;
if (xt_saved_debug_type != DEBUG_NONE)
debug_type = xt_saved_debug_type;
- for (i = 0; i < MAX_SLOTS; i++)
+ for (i = 0; i < config_max_slots; i++)
v->slots[i].opcode = XTENSA_UNDEFINED;
}
+static void
+xg_copy_vinsn (vliw_insn *dst, vliw_insn *src)
+{
+ memcpy (dst, src,
+ offsetof(vliw_insn, slots) + src->num_slots * sizeof(TInsn));
+ dst->insnbuf = src->insnbuf;
+ memcpy (dst->slotbuf, src->slotbuf, src->num_slots * sizeof(xtensa_insnbuf));
+}
+
+
static bfd_boolean
vinsn_has_specific_opcodes (vliw_insn *v)
{
{
int i;
xtensa_insnbuf_free (xtensa_default_isa, v->insnbuf);
- for (i = 0; i < MAX_SLOTS; i++)
+ for (i = 0; i < config_max_slots; i++)
xtensa_insnbuf_free (xtensa_default_isa, v->slotbuf[i]);
}
for (slot = 0; slot < vinsn->num_slots; slot++)
{
TInsn *tinsn = &vinsn->slots[slot];
+ expressionS *extra_arg = &tinsn->extra_arg;
bfd_boolean tinsn_has_fixup =
tinsn_to_slotbuf (vinsn->format, slot, tinsn,
vinsn->slotbuf[slot]);
xtensa_format_set_slot (isa, fmt, slot,
insnbuf, vinsn->slotbuf[slot]);
+ if (extra_arg->X_op != O_illegal && extra_arg->X_op != O_register)
+ {
+ if (vinsn->num_slots != 1)
+ as_bad (_("TLS relocation not allowed in FLIX bundle"));
+ else if (record_fixup)
+ /* Instructions that generate TLS relocations should always be
+ relaxed in the front-end. If "record_fixup" is set, then this
+ function is being called during back-end relaxation, so flag
+ the unexpected behavior as an error. */
+ as_bad (_("unexpected TLS relocation"));
+ else
+ fix_new (fragP, frag_offset - fragP->fr_literal,
+ xtensa_format_length (isa, fmt),
+ extra_arg->X_add_symbol, extra_arg->X_add_number,
+ FALSE, map_operator_to_reloc (extra_arg->X_op, FALSE));
+ }
if (tinsn_has_fixup)
{
int i;
for (i = 0; i < noperands; i++)
{
- expressionS* expr = &tinsn->tok[i];
- switch (expr->X_op)
+ expressionS* exp = &tinsn->tok[i];
+ switch (exp->X_op)
{
case O_symbol:
case O_lo16:
|| tinsn->is_specific_opcode
|| !xg_is_relaxable_insn (tinsn, 0))
{
- xg_add_opcode_fix (tinsn, i, fmt, slot, expr, fragP,
+ xg_add_opcode_fix (tinsn, i, fmt, slot, exp, fragP,
frag_offset - fragP->fr_literal);
}
else
{
- if (expr->X_op != O_symbol)
+ if (exp->X_op != O_symbol)
as_bad (_("invalid operand"));
- tinsn->symbol = expr->X_add_symbol;
- tinsn->offset = expr->X_add_number;
+ tinsn->symbol = exp->X_add_symbol;
+ tinsn->offset = exp->X_add_number;
}
}
else
offsetT
get_expr_const (const expressionS *s)
{
- assert (expr_is_const (s));
+ gas_assert (expr_is_const (s));
return s->X_add_number;
}
offsetT
get_expr_register (const expressionS *s)
{
- assert (expr_is_register (s));
+ gas_assert (expr_is_register (s));
return s->X_add_number;
}
projects / deliverable / binutils-gdb.git / blobdiff